summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/amcc/kilauea/kilauea.c31
-rw-r--r--cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c5
-rw-r--r--include/asm-ppc/ppc4xx-sdram.h6
3 files changed, 37 insertions, 5 deletions
diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c
index f407e19..1caa2fd 100644
--- a/board/amcc/kilauea/kilauea.c
+++ b/board/amcc/kilauea/kilauea.c
@@ -374,3 +374,34 @@ int post_hotkeys_pressed(void)
return 0; /* No hotkeys supported */
}
#endif /* CONFIG_POST */
+
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+/*
+ * This is for quicker auto calibration boot up once WRDTR and CLKTR
+ * values for the kilauea board were determined and are therefore known.
+ *
+ * Use these scan options for PLB bus greater than or equal 200MHz
+ * else use the defaults. These options are known to return a cycle
+ * delay of T2 or better with a 200MHz PLB bus. Scanning the
+ * full list of WDTR/CLKTR should work, but currently it does not.
+ * HW team is investigating.
+ */
+/* List of (SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CLKP]) pairs to try */
+struct sdram_timing quick_scan_options[] = {
+ {0, 3}, {1, 1}, {1, 2}, {1, 3},
+ {2, 1}, {2, 2}, {2, 3}, {3, 1},
+ {3, 2}, {4, 1}, {-1, -1}
+};
+
+ulong ddr_scan_option(ulong default_val)
+{
+ PPC4xx_SYS_INFO board_cfg;
+
+ get_sys_info(&board_cfg);
+
+ if (board_cfg.freqPLB >= 200000000)
+ return (ulong)(quick_scan_options);
+ else
+ return (ulong)default_val;
+}
+#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
diff --git a/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
index 83b9883..3ba8176 100644
--- a/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
+++ b/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
@@ -79,11 +79,6 @@ struct ddrautocal {
u32 flags;
};
-struct sdram_timing {
- u32 wrdtr;
- u32 clktr;
-};
-
struct sdram_timing_clks {
u32 wrdtr;
u32 clktr;
diff --git a/include/asm-ppc/ppc4xx-sdram.h b/include/asm-ppc/ppc4xx-sdram.h
index 8efa557..2ba5619 100644
--- a/include/asm-ppc/ppc4xx-sdram.h
+++ b/include/asm-ppc/ppc4xx-sdram.h
@@ -1403,6 +1403,12 @@
#endif /* CONFIG_SDRAM_PPC4xx_DENALI_DDR2 */
#ifndef __ASSEMBLY__
+
+struct sdram_timing {
+ u32 wrdtr;
+ u32 clktr;
+};
+
/*
* Prototypes
*/