summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/ixp/start.S280
-rw-r--r--arch/arm/cpu/ixp/u-boot.lds14
2 files changed, 293 insertions, 1 deletions
diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index 6efe333..b2c8255 100644
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -93,12 +93,15 @@ _fiq: .word fiq
* - jump to second stage
*/
+.globl _TEXT_BASE
_TEXT_BASE:
.word TEXT_BASE
+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
_armboot_start:
.word _start
+#endif
/*
* These are defined in the board-specific linker script.
@@ -123,6 +126,274 @@ FIQ_STACK_START:
.word 0x0badc0de
#endif
+#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
+/* IRQ stack memory (calculated at run-time) + 8 bytes */
+.globl IRQ_STACK_START_IN
+IRQ_STACK_START_IN:
+ .word 0x0badc0de
+
+.globl _datarel_start
+_datarel_start:
+ .word __datarel_start
+
+.globl _datarelrolocal_start
+_datarelrolocal_start:
+ .word __datarelrolocal_start
+
+.globl _datarellocal_start
+_datarellocal_start:
+ .word __datarellocal_start
+
+.globl _datarelro_start
+_datarelro_start:
+ .word __datarelro_start
+
+.globl _got_start
+_got_start:
+ .word __got_start
+
+.globl _got_end
+_got_end:
+ .word __got_end
+
+/*
+ * the actual reset code
+ */
+
+reset:
+ /* disable mmu, set big-endian */
+ mov r0, #0xf8
+ mcr p15, 0, r0, c1, c0, 0
+ CPWAIT r0
+
+ /* invalidate I & D caches & BTB */
+ mcr p15, 0, r0, c7, c7, 0
+ CPWAIT r0
+
+ /* invalidate I & Data TLB */
+ mcr p15, 0, r0, c8, c7, 0
+ CPWAIT r0
+
+ /* drain write and fill buffers */
+ mcr p15, 0, r0, c7, c10, 4
+ CPWAIT r0
+
+ /* disable write buffer coalescing */
+ mrc p15, 0, r0, c1, c0, 1
+ orr r0, r0, #1
+ mcr p15, 0, r0, c1, c0, 1
+ CPWAIT r0
+
+ /* set EXP CS0 to the optimum timing */
+ ldr r1, =CONFIG_SYS_EXP_CS0
+ ldr r2, =IXP425_EXP_CS0
+ str r1, [r2]
+
+ /* make sure flash is visible at 0 */
+#if 0
+ ldr r2, =IXP425_EXP_CFG0
+ ldr r1, [r2]
+ orr r1, r1, #0x80000000
+ str r1, [r2]
+#endif
+ mov r1, #CONFIG_SYS_SDR_CONFIG
+ ldr r2, =IXP425_SDR_CONFIG
+ str r1, [r2]
+
+ /* disable refresh cycles */
+ mov r1, #0
+ ldr r3, =IXP425_SDR_REFRESH
+ str r1, [r3]
+
+ /* send nop command */
+ mov r1, #3
+ ldr r4, =IXP425_SDR_IR
+ str r1, [r4]
+ DELAY_FOR 0x4000, r0
+
+ /* set SDRAM internal refresh val */
+ ldr r1, =CONFIG_SYS_SDRAM_REFRESH_CNT
+ str r1, [r3]
+ DELAY_FOR 0x4000, r0
+
+ /* send precharge-all command to close all open banks */
+ mov r1, #2
+ str r1, [r4]
+ DELAY_FOR 0x4000, r0
+
+ /* provide 8 auto-refresh cycles */
+ mov r1, #4
+ mov r5, #8
+111: str r1, [r4]
+ DELAY_FOR 0x100, r0
+ subs r5, r5, #1
+ bne 111b
+
+ /* set mode register in sdram */
+ mov r1, #CONFIG_SYS_SDR_MODE_CONFIG
+ str r1, [r4]
+ DELAY_FOR 0x4000, r0
+
+ /* send normal operation command */
+ mov r1, #6
+ str r1, [r4]
+ DELAY_FOR 0x4000, r0
+
+ /* copy */
+ mov r0, #0
+ mov r4, r0
+ add r2, r0, #CONFIG_SYS_MONITOR_LEN
+ mov r1, #0x10000000
+ mov r5, r1
+
+ 30:
+ ldr r3, [r0], #4
+ str r3, [r1], #4
+ cmp r0, r2
+ bne 30b
+
+ /* invalidate I & D caches & BTB */
+ mcr p15, 0, r0, c7, c7, 0
+ CPWAIT r0
+
+ /* invalidate I & Data TLB */
+ mcr p15, 0, r0, c8, c7, 0
+ CPWAIT r0
+
+ /* drain write and fill buffers */
+ mcr p15, 0, r0, c7, c10, 4
+ CPWAIT r0
+
+ /* move flash to 0x50000000 */
+ ldr r2, =IXP425_EXP_CFG0
+ ldr r1, [r2]
+ bic r1, r1, #0x80000000
+ str r1, [r2]
+
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ /* invalidate I & Data TLB */
+ mcr p15, 0, r0, c8, c7, 0
+ CPWAIT r0
+
+ /* enable I cache */
+ mrc p15, 0, r0, c1, c0, 0
+ orr r0, r0, #MMU_Control_I
+ mcr p15, 0, r0, c1, c0, 0
+ CPWAIT r0
+
+ mrs r0,cpsr /* set the cpu to SVC32 mode */
+ bic r0,r0,#0x1f /* (superviser mode, M=10011) */
+ orr r0,r0,#0x13
+ msr cpsr,r0
+
+/* Set stackpointer in internal RAM to call board_init_f */
+call_board_init_f:
+ ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ ldr r0,=0x00000000
+ bl board_init_f
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ */
+ .globl relocate_code
+relocate_code:
+ mov r4, r0 /* save addr_sp */
+ mov r5, r1 /* save addr of gd */
+ mov r6, r2 /* save addr of destination */
+ mov r7, r2 /* save addr of destination */
+
+ /* Set up the stack */
+stack_setup:
+ mov sp, r4
+
+ adr r0, _start
+ ldr r2, _TEXT_BASE
+ ldr r3, _bss_start
+ sub r2, r3, r2 /* r2 <- size of armboot */
+ add r2, r0, r2 /* r2 <- source end address */
+ cmp r0, r6
+ beq clear_bss
+
+#ifndef CONFIG_SKIP_RELOCATE_UBOOT
+copy_loop:
+ ldmia r0!, {r9-r10} /* copy from source address [r0] */
+ stmia r6!, {r9-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end addreee [r2] */
+ ble copy_loop
+
+#ifndef CONFIG_PRELOADER
+ /* fix got entries */
+ ldr r1, _TEXT_BASE /* Text base */
+ mov r0, r7 /* reloc addr */
+ ldr r2, _got_start /* addr in Flash */
+ ldr r3, _got_end /* addr in Flash */
+ sub r3, r3, r1
+ add r3, r3, r0
+ sub r2, r2, r1
+ add r2, r2, r0
+
+fixloop:
+ ldr r4, [r2]
+ sub r4, r4, r1
+ add r4, r4, r0
+ str r4, [r2]
+ add r2, r2, #4
+ cmp r2, r3
+ bne fixloop
+#endif
+#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
+
+clear_bss:
+#ifndef CONFIG_PRELOADER
+ ldr r0, _bss_start
+ ldr r1, _bss_end
+ ldr r3, _TEXT_BASE /* Text base */
+ mov r4, r7 /* reloc addr */
+ sub r0, r0, r3
+ add r0, r0, r4
+ sub r1, r1, r3
+ add r1, r1, r4
+ mov r2, #0x00000000 /* clear */
+
+clbss_l:str r2, [r0] /* clear loop... */
+ add r0, r0, #4
+ cmp r0, r1
+ bne clbss_l
+
+ bl coloured_LED_init
+ bl red_LED_on
+#endif
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+ ldr r0, _TEXT_BASE
+ ldr r2, _board_init_r
+ sub r2, r2, r0
+ add r2, r2, r7 /* position from board_init_r in RAM */
+ /* setup parameters for board_init_r */
+ mov r0, r5 /* gd_t */
+ mov r1, r7 /* dest_addr */
+ /* jump to it ... */
+ mov lr, r2
+ mov pc, lr
+
+_board_init_r: .word board_init_r
+
+#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
/****************************************************************************/
/* */
/* the actual reset code */
@@ -304,6 +575,7 @@ clbss_l:str r2, [r0] /* clear loop... */
ldr pc, _start_armboot
_start_armboot: .word start_armboot
+#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
/****************************************************************************/
@@ -345,9 +617,13 @@ _start_armboot: .word start_armboot
stmia sp, {r0 - r12} /* Calling r0-r12 */
add r8, sp, #S_PC
+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
ldr r2, _armboot_start
sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
+#else
+ ldr r2, IRQ_STACK_START_IN
+#endif
ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */
add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */
@@ -382,9 +658,13 @@ _start_armboot: .word start_armboot
.endm
.macro get_bad_stack
+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
ldr r13, _armboot_start @ setup our mode stack
sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+#else
+ ldr r13, IRQ_STACK_START_IN @ setup our mode stack
+#endif
str lr, [r13] @ save caller lr / spsr
mrs lr, spsr
diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds
index b8ff2ee..f3d9dc5 100644
--- a/arch/arm/cpu/ixp/u-boot.lds
+++ b/arch/arm/cpu/ixp/u-boot.lds
@@ -39,11 +39,23 @@ SECTIONS
.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
. = ALIGN(4);
- .data : { *(.data) }
+ .data : {
+ *(.data)
+ __datarel_start = .;
+ *(.data.rel)
+ __datarelrolocal_start = .;
+ *(.data.rel.ro.local)
+ __datarellocal_start = .;
+ *(.data.rel.local)
+ __datarelro_start = .;
+ *(.data.rel.ro)
+ }
+ __got_start = .;
. = ALIGN(4);
.got : { *(.got) }
+ __got_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }