summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README9
-rw-r--r--drivers/i2c/soft_i2c.c12
2 files changed, 20 insertions, 1 deletions
diff --git a/README b/README
index ad792d3..afcc671 100644
--- a/README
+++ b/README
@@ -1509,6 +1509,15 @@ The following options need to be configured:
Bus on the MPC8260. But it should be not so difficult
to add this option to other architectures.
+ CONFIG_SOFT_I2C_READ_REPEATED_START
+
+ defining this will force the i2c_read() function in
+ the soft_i2c driver to perform an I2C repeated start
+ between writing the address pointer and reading the
+ data. If this define is omitted the default behaviour
+ of doing a stop-start sequence will be used. Most I2C
+ devices can use either method, but some require one or
+ the other.
- SPI Support: CONFIG_SPI
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index a27de5a..da6cec1 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -385,8 +385,18 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
shift -= 8;
}
- send_stop(); /* reportedly some chips need a full stop */
+
+ /* Some I2C chips need a stop/start sequence here,
+ * other chips don't work with a full stop and need
+ * only a start. Default behaviour is to send the
+ * stop/start sequence.
+ */
+#ifdef CONFIG_SOFT_I2C_READ_REPEATED_START
send_start();
+#else
+ send_stop();
+ send_start();
+#endif
}
/*
* Send the chip address again, this time for a read cycle.