summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/block/ahci.c98
1 files changed, 69 insertions, 29 deletions
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 7b2ec50..d94da1f 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -42,6 +42,14 @@ hd_driveid_t *ataid[AHCI_MAX_PORTS];
#define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0)
+/*
+ * Some controllers limit number of blocks they can read at once. Contemporary
+ * SSD devices work much faster if the read size is aligned to a power of 2.
+ * Let's set default to 128 and allowing to be overwritten if needed.
+ */
+#ifndef MAX_SATA_BLOCKS_READ
+#define MAX_SATA_BLOCKS_READ 0x80
+#endif
static inline u32 ahci_port_base(u32 base, u32 port)
{
@@ -88,6 +96,8 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
int i, j;
volatile u8 *port_mmio;
+ debug("ahci_host_init: start\n");
+
cap_save = readl(mmio + HOST_CAP);
cap_save &= ((1 << 28) | (1 << 17));
cap_save |= (1 << 27);
@@ -129,6 +139,9 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
debug("cap 0x%x port_map 0x%x n_ports %d\n",
probe_ent->cap, probe_ent->port_map, probe_ent->n_ports);
+ if (probe_ent->n_ports > CONFIG_SYS_SCSI_MAX_SCSI_ID)
+ probe_ent->n_ports = CONFIG_SYS_SCSI_MAX_SCSI_ID;
+
for (i = 0; i < probe_ent->n_ports; i++) {
probe_ent->port[i].port_mmio = ahci_port_base((u32) mmio, i);
port_mmio = (u8 *) probe_ent->port[i].port_mmio;
@@ -277,8 +290,8 @@ static int ahci_init_one(pci_dev_t pdev)
probe_ent->pio_mask = 0x1f;
probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
- probe_ent->mmio_base = (u32)pci_map_bar(pdev, AHCI_PCI_BAR,
- PCI_REGION_MEM);
+ pci_read_config_dword(pdev, PCI_BASE_ADDRESS_5, &probe_ent->mmio_base);
+ debug("ahci mmio_base=0x%08x\n", probe_ent->mmio_base);
/* Take from kernel:
* JMicron-specific fixup:
@@ -398,7 +411,7 @@ static int ahci_port_start(u8 port)
* 32 bytes each in size
*/
pp->cmd_slot = (struct ahci_cmd_hdr *)mem;
- debug("cmd_slot = %p\n", pp->cmd_slot);
+ debug("cmd_slot = 0x%x\n", (unsigned)pp->cmd_slot);
mem += (AHCI_CMD_SLOT_SZ + 224);
/*
@@ -561,42 +574,69 @@ static int ata_scsiop_inquiry(ccb *pccb)
*/
static int ata_scsiop_read10(ccb * pccb)
{
- u32 len = 0;
+ u32 lba = 0;
+ u16 blocks = 0;
u8 fis[20];
+ u8 *user_buffer = pccb->pdata;
+ u32 user_buffer_size = pccb->datalen;
- len = (((u32) pccb->cmd[7]) << 8) | ((u32) pccb->cmd[8]);
+ /* Retrieve the base LBA number from the ccb structure. */
+ memcpy(&lba, pccb->cmd + 2, sizeof(lba));
+ lba = be32_to_cpu(lba);
- /* For 10-byte and 16-byte SCSI R/W commands, transfer
+ /*
+ * And the number of blocks.
+ *
+ * For 10-byte and 16-byte SCSI R/W commands, transfer
* length 0 means transfer 0 block of data.
* However, for ATA R/W commands, sector count 0 means
* 256 or 65536 sectors, not 0 sectors as in SCSI.
*
* WARNING: one or two older ATA drives treat 0 as 0...
*/
- if (!len)
- return 0;
+ blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]);
+
+ debug("scsi_ahci: read %d blocks starting from lba 0x%x\n",
+ (unsigned)lba, blocks);
+
+ /* Preset the FIS */
memset(fis, 0, 20);
+ fis[0] = 0x27; /* Host to device FIS. */
+ fis[1] = 1 << 7; /* Command FIS. */
+ fis[2] = ATA_CMD_RD_DMA; /* Command byte. */
- /* Construct the FIS */
- fis[0] = 0x27; /* Host to device FIS. */
- fis[1] = 1 << 7; /* Command FIS. */
- fis[2] = ATA_CMD_RD_DMA; /* Command byte. */
-
- /* LBA address, only support LBA28 in this driver */
- fis[4] = pccb->cmd[5];
- fis[5] = pccb->cmd[4];
- fis[6] = pccb->cmd[3];
- fis[7] = (pccb->cmd[2] & 0x0f) | 0xe0;
-
- /* Sector Count */
- fis[12] = pccb->cmd[8];
- fis[13] = pccb->cmd[7];
-
- /* Read from ahci */
- if (get_ahci_device_data(pccb->target, (u8 *) & fis, 20,
- pccb->pdata, pccb->datalen)) {
- debug("scsi_ahci: SCSI READ10 command failure.\n");
- return -EIO;
+ while (blocks) {
+ u16 now_blocks; /* number of blocks per iteration */
+ u32 transfer_size; /* number of bytes per iteration */
+
+ now_blocks = min(MAX_SATA_BLOCKS_READ, blocks);
+
+ transfer_size = ATA_BLOCKSIZE * now_blocks;
+ if (transfer_size > user_buffer_size) {
+ printf("scsi_ahci: Error: buffer too small.\n");
+ return -EIO;
+ }
+
+ /* LBA address, only support LBA28 in this driver */
+ fis[4] = (lba >> 0) & 0xff;
+ fis[5] = (lba >> 8) & 0xff;
+ fis[6] = (lba >> 16) & 0xff;
+ fis[7] = ((lba >> 24) & 0xf) | 0xe0;
+
+ /* Block (sector) count */
+ fis[12] = (now_blocks >> 0) & 0xff;
+ fis[13] = (now_blocks >> 8) & 0xff;
+
+ /* Read from ahci */
+ if (get_ahci_device_data(pccb->target, (u8 *) &fis, sizeof(fis),
+ user_buffer, user_buffer_size)) {
+ debug("scsi_ahci: SCSI READ10 command failure.\n");
+ return -EIO;
+ }
+ user_buffer += transfer_size;
+ user_buffer_size -= transfer_size;
+ blocks -= now_blocks;
+ lba += now_blocks;
}
return 0;
@@ -617,7 +657,7 @@ static int ata_scsiop_read_capacity10(ccb *pccb)
return -EPERM;
}
- cap = le32_to_cpu(ataid[pccb->target]->lba_capacity);
+ cap = be32_to_cpu(ataid[pccb->target]->lba_capacity);
memcpy(pccb->pdata, &cap, sizeof(cap));
pccb->pdata[4] = pccb->pdata[5] = 0;