summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/tqm5200/cmd_stk52xx.c17
-rw-r--r--board/tqm5200/tqm5200.c2
2 files changed, 12 insertions, 7 deletions
diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
index b746679..27a6c41 100644
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -561,7 +561,7 @@ void led_init(void)
gpt->gpt6.emsr |= 0x00000024;
gpt->gpt7.emsr |= 0x00000024;
-
+#ifndef CONFIG_TQM5200S
/* enable SM501 GPIO control (in both power modes) */
*(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |=
POWER_MODE_GATE_GPIO_PWM_I2C;
@@ -574,6 +574,7 @@ void led_init(void)
/* configure SM501 gpio pins 48-51 as output */
*(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= (0xF << 16);
+#endif /* !CONFIG_TQM5200S */
}
/*
@@ -650,7 +651,7 @@ int do_led(char *argv[])
gpt->gpt7.emsr &= ~(1 << 4);
}
break;
-
+#ifndef CONFIG_TQM5200S
case 24:
if (strcmp (argv[3], "on") == 0) {
*(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |=
@@ -730,7 +731,7 @@ int do_led(char *argv[])
~(0x1 << 19);
}
break;
-
+#endif /* !CONFIG_TQM5200S */
default:
printf ("%s: invalid led number %s\n", __FUNCTION__, argv[2]);
return 1;
@@ -1110,7 +1111,7 @@ int do_rs232(char *argv[])
return error_status;
}
-#ifndef CONFIG_FO300
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
static void sm501_backlight (unsigned int state)
{
if (state == BL_ON) {
@@ -1120,7 +1121,7 @@ static void sm501_backlight (unsigned int state)
*(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
~((1 << 26) | (1 << 27));
}
-#endif
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -1160,7 +1161,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
else
printf ("Error\n");
return rcode;
-#ifndef CONFIG_FO300
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
} else if (strncmp (argv[1], "backlight", 4) == 0) {
if (strncmp (argv[2], "on", 2) == 0) {
sm501_backlight (BL_ON);
@@ -1170,7 +1171,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
sm501_backlight (BL_OFF);
return 0;
}
-#endif
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
}
break;
@@ -1228,8 +1229,10 @@ U_BOOT_CMD(
" - loopback plug for X83 required\n"
"fkt rs232 number\n"
" - loopback plug(s) for X2 required\n"
+#ifndef CONFIG_TQM5200S
"fkt backlight on/off\n"
" - switch backlight on or off\n"
+#endif /* !CONFIG_TQM5200S */
);
#elif defined(CONFIG_FO300)
U_BOOT_CMD(
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 29d6f00..d10cb59 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -543,6 +543,7 @@ int last_stage_init (void)
__asm__ volatile ("sync");
}
+#ifndef CONFIG_TQM5200S /* The TQM5200S has no SM501 grafic controller */
/*
* Check for Grafic Controller
*/
@@ -586,6 +587,7 @@ int last_stage_init (void)
#endif
return 0;
+#endif /* !CONFIG_TQM5200S */
}
#ifdef CONFIG_VIDEO_SM501