diff options
| -rw-r--r-- | CHANGELOG | 283 | ||||
| -rw-r--r-- | Makefile | 2 | ||||
| -rw-r--r-- | README | 8 |
3 files changed, 288 insertions, 5 deletions
@@ -1,3 +1,286 @@ +commit f986325dd569faeaec4186f678d113505c5c4828 +Author: Ron Madrid <ron_madrid@sbcglobal.net> +Date: Tue Jun 1 17:00:49 2010 -0700 + + Update SICRL_USBDR to reflect 4 different settings + + This patch changed the SICRL_USBDR define to reflect the 4 different bit + settings for this two-bit field. The four different options are '00', '01', + '10', and '11'. This patch also corrects the config file for SIMPC8313 and + MPC8313ERDB for the appropriate fields. This change only affects the MPC8313 + cpu. + + Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 3057c6be5efda781a72ca04432e0a4ed6e670030 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Fri Apr 23 12:20:11 2010 -0500 + + fdt_support: add entry for sec3.1 and fix sec3.3 + + Add sec3.1 h/w geometry for fdt node fixups. + + Also, technically, whilst SEC v3.3 h/w honours the tls_ssl_stream descriptor + type, it lacks the ARC4 algorithm execution unit required to be able + to execute anything meaningful with it. Change the node to agree with + the documentation that declares that the sec3.3 really doesn't have such + a descriptor type. + + Reported-by: Haiying Wang <Haiying.Wang@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 5f4d36825a028e300b7d56a566d2cf84418b7a68 +Author: Timur Tabi <timur@freescale.com> +Date: Thu May 20 11:16:16 2010 -0500 + + fsl: rename 'dma' to 'brdcfg1' in the ngPIXIS structure + + The ngPIXIS is a board-specific FPGA, but the definition of the registers + is mostly consistent. On boards where it matter, register 9 is called + 'brdcfg1' instead of 'dma', so rename the variable in the ngpixis_t + definition. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 6e37a044076896ba88b0d6316fadd492032c5193 +Author: Timur Tabi <timur@freescale.com> +Date: Thu May 20 12:45:39 2010 -0500 + + fsl/85xx: add clkdvdr and pmuxcr2 to global utilities structure definition + + Add the 'clkdvdr' and 'pmuxcr2' registers to the 85xx definition of + struct ccsr_gur. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 39c209546ab5b11ca6410c5cc57dcbf457e50800 +Author: Tom <Tom@bumblecow.com> +Date: Fri May 28 13:23:16 2010 -0500 + + ARM Update mach-types + + Fetched from http://www.arm.linux.org.uk/developer/machines/download.php + And built with + + repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm + commit 3defb2476166445982a90c12d33f8947e75476c4 + + Signed-off-by: Tom <Tom@bumblecow.com> + +commit 551bd947bd6f982fa38dde840576eba52346160c +Author: Tom <Tom@bumblecow.com> +Date: Sun May 9 16:58:11 2010 -0500 + + ARM Update mach-types + + Fetched from http://www.arm.linux.org.uk/developer/machines/download.php + And built with + + repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm + commit 257dab81413b31b8648becfe11586b3a41e5c29a + + Signed-off-by: Tom <Tom@bumblecow.com> + +commit 1117cbf2adac59050af1751af6c6a524afa5c3ef +Author: Thomas Chou <thomas@wytron.com.tw> +Date: Fri May 28 10:56:50 2010 +0800 + + nios: remove nios-32 arch + + The nios-32 arch is obsolete and broken. So it is removed. + + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> + +commit 6803336c9f21ba428f5c1b1cf825bbbac0a762e5 +Author: Thomas Chou <thomas@wytron.com.tw> +Date: Fri May 21 11:08:02 2010 +0800 + + nios2: allow STANDALONE_LOAD_ADDR overriding + + This patch allows users to override default STANDALONE_LOAD_ADDR. + The gcclibdir path was duplicated in the standalone Makefile and + can be removed. + + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> + Signed-off-by: Scott McNutt <smcnutt@psyent.com> + +commit 8d52ea6db484c689a75ef8a36a4e525753b8f078 +Author: Thomas Chou <thomas@wytron.com.tw> +Date: Sat May 15 06:00:05 2010 +0800 + + nios2: fix div64 issue for gcc4 + + This patch fixes the run-time error on div64 when built with + gcc4, which was reported by jhwu0625 on nios forum. It merges + math support from libgcc of gcc4. This patch is copied from + nios2-linux. + + It works with both gcc3 and gcc4. The old mult.c, divmod.c and + math.h are removed. + + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> + Signed-off-by: Scott McNutt <smcnutt@psyent.com> + +commit 0df01fd3d71481b5cc7aeea6a741b9fc3be15178 +Author: Thomas Chou <thomas@wytron.com.tw> +Date: Fri May 21 11:08:03 2010 +0800 + + nios2: fix r15 issue for gcc4 + + The "-ffixed-r15" option doesn't work well for gcc4. Since we + don't use gp for small data with option "-G0", we can use gp + as global data pointer. This allows compiler to use r15. It + is necessary for gcc4 to work properly. + + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> + Signed-off-by: Scott McNutt <smcnutt@psyent.com> + +commit 661ba14051db6766932fcb50ba1ec7c67f230054 +Author: Thomas Chou <thomas@wytron.com.tw> +Date: Fri Apr 30 11:34:16 2010 +0800 + + spi: add altera spi controller support + + This patch adds the driver of altera spi controller, which is + used as epcs/spi flash controller. It also works with mmc_spi + driver. + + This driver support more than one spi bus, with base list declared + #define CONFIG_SYS_ALTERA_SPI_LIST { BASE_0,BASE_1,... } + + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> + Tested-by: Ian Abbott <abbotti@mev.co.uk> + Signed-off-by: Scott McNutt <smcnutt@psyent.com> + +commit 1e8e9bad2db38e93c3bc9f4b6238b3d8be99e469 +Author: Thomas Chou <thomas@wytron.com.tw> +Date: Fri Apr 30 11:34:15 2010 +0800 + + nios2: add gpio support to nios2-generic board + + This patch adds gpio support of Altera PIO component to the + nios2-generic board. Though it drives only gpio_led at the + moment, it supports bidirectional port to control bit-banging + I2C, NAND flash busy status or button switches, etc. + + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> + Tested-by: Ian Abbott <abbotti@mev.co.uk> + Signed-off-by: Scott McNutt <smcnutt@psyent.com> + +commit 3e6b86b5552840bb4147871a753840eb3923374c +Author: Thomas Chou <thomas@wytron.com.tw> +Date: Fri Apr 30 11:34:14 2010 +0800 + + misc: add gpio based status led driver + + This patch adds a status led driver followed the GPIO access + conventions of Linux. The led mask is used to specify the gpio pin. + + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> + Tested-by: Ian Abbott <abbotti@mev.co.uk> + Signed-off-by: Scott McNutt <smcnutt@psyent.com> + +commit cedd341d551b6b705e97ab1953a87575b9ff9ef9 +Author: Thomas Chou <thomas@wytron.com.tw> +Date: Fri Apr 30 11:34:13 2010 +0800 + + nios2: add gpio support + + This patch adds driver for a trivial gpio core, which is described + in http://nioswiki.com/GPIO. It is used for gpio led and nand flash + interface in u-boot. + + When CONFIG_SYS_GPIO_BASE is not defined, board may provide + its own driver. + + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> + Tested-by: Ian Abbott <abbotti@mev.co.uk> + Signed-off-by: Scott McNutt <smcnutt@psyent.com> + +commit adf55679af1ed98c15a136eb81d6204ebe740b30 +Author: Wolfgang Wegner <w.wegner@astro-kom.de> +Date: Tue Mar 30 19:19:51 2010 +0100 + + add CONFIG_SYS_FEC_FULL_MII for MCF5445x + + This patch adds support for full MII interface on MCF5445x (in contrast + to RMII as used on the evaluation boards). + + Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de> + +commit ae49099755affc942171a7727c1b12c51d167abf +Author: Wolfgang Wegner <w.wegner@astro-kom.de> +Date: Tue Mar 30 19:19:50 2010 +0100 + + add CONFIG_SYS_FEC_NO_SHARED_PHY for MCF5445x + + This patch adds the possibility to handle seperate PHYs to MCF5445x. + Naming is chosen to resemble the contrary CONFIG_FEC_SHARED_PHY in the + linux kernel. + + Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de> + +commit e9b43cae1a20af13d1baeb13038b3f34905c14b5 +Author: Wolfgang Wegner <w.wegner@astro-kom.de> +Date: Tue Mar 30 19:20:31 2010 +0100 + + add missing PCS3 for MCF5445x + + This patch adds the code for handling PCS3 (DSPI chip select 3) in + cpu_init.c and m5445x.h + + Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de> + +commit d0fe1128c4451327b9cb0fac1a76efd194b078b5 +Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> +Date: Wed May 26 21:26:43 2010 +0400 + + USB: fix create_pipe() + + create_pipe() can give wrong result if an expression is passed as the 'endpoint' + argument -- due to missing parentheses. + + Thanks to Martin Mueller for finding the bug and providing the patch. + + Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> + +commit c941b77adc40f344215e367b3d1fc638addff870 +Author: Andrew Caldwell <Andrew.Caldwell@analog.com> +Date: Fri May 7 15:10:07 2010 -0400 + + Blackfin: nand: drain the write buffer before returning + + The current Blackfin nand write function fills up the write buffer but + returns before it has had a chance to drain. On faster systems, this + isn't a problem as the operation finishes before the ECC registers are + read, but on slower systems the ECC may be incomplete when the core tries + to read it. + + So wait for the buffer to drain once we're done writing to it. + + Signed-off-by: Andrew Caldwell <Andrew.Caldwell@analog.com> + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 01f03bda5b22e5aeae5f02fd537da97a41485c73 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed May 26 23:57:08 2010 +0200 + + Prepare v2010.06-rc1 + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit c4976807cbbabd281f45466ac5e47e5639bcc9cb +Author: Wolfgang Denk <wd@denx.de> +Date: Wed May 26 23:51:22 2010 +0200 + + Coding style cleanup, update CHANGELOG. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit c7da8c19b5f7fd58b5b4b1d247648851af56e1f0 Author: Andreas Biessmann <andreas.devel@googlemail.com> Date: Sat May 22 13:17:21 2010 +0200 @@ -24,7 +24,7 @@ VERSION = 2010 PATCHLEVEL = 06 SUBLEVEL = -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else @@ -143,9 +143,9 @@ Directory Hierarchy: /cpu CPU specific files /arm720t Files specific to ARM 720 CPUs /arm920t Files specific to ARM 920 CPUs - /at91rm9200 Files specific to Atmel AT91RM9200 CPU - /imx Files specific to Freescale MC9328 i.MX CPUs - /s3c24x0 Files specific to Samsung S3C24X0 CPUs + /at91rm9200 Files specific to Atmel AT91RM9200 CPU + /imx Files specific to Freescale MC9328 i.MX CPUs + /s3c24x0 Files specific to Samsung S3C24X0 CPUs /arm925t Files specific to ARM 925 CPUs /arm926ejs Files specific to ARM 926 CPUs /arm1136 Files specific to ARM 1136 CPUs @@ -2504,7 +2504,7 @@ to save the current settings. I2C muxes, you can define here, how to reach this EEPROM. For example: - #define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0" + #define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0" EEPROM which holds the environment, is reached over a pca9547 i2c mux with address 0x70, channel 3. |