diff options
168 files changed, 4431 insertions, 386 deletions
@@ -56,6 +56,25 @@ config CC_OPTIMIZE_FOR_SIZE This option is enabled by default for U-Boot. +config SYS_MALLOC_F + bool "Enable malloc() pool before relocation" + default 0x400 + help + Before relocation memory is very limited on many platforms. Still, + we can provide a small malloc() pool if needed. Driver model in + particular needs this to operate, so that it can allocate the + initial serial device and any others that are needed. + +config SYS_MALLOC_F_LEN + hex "Size of malloc() pool before relocation" + depends on SYS_MALLOC_F + default 0x400 + help + Before relocation memory is very limited on many platforms. Still, + we can provide a small malloc() pool if needed. Driver model in + particular needs this to operate, so that it can allocate the + initial serial device and any others that are needed. + menuconfig EXPERT bool "Configure standard U-Boot features (expert users)" help @@ -118,6 +137,7 @@ config FIT_VERBOSE config FIT_SIGNATURE bool "Enable signature verification of FIT uImages" depends on FIT + depends on DM select RSA help This option enables signature verification of FIT uImages, @@ -165,3 +185,5 @@ source "drivers/Kconfig" source "fs/Kconfig" source "lib/Kconfig" + +source "test/Kconfig" diff --git a/arch/Kconfig b/arch/Kconfig index 132123b..3d419bc 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -40,6 +40,7 @@ config OPENRISC config PPC bool "PowerPC architecture" select HAVE_PRIVATE_LIBGCC + select SUPPORT_OF_CONTROL config SANDBOX bool "Sandbox" diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index a8dc4e2..24f5c02 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -8,30 +8,79 @@ config USE_PRIVATE_LIBGCC default y config SYS_CPU - default "arcv1" + default "arcv1" if ISA_ARCOMPACT + default "arcv2" if ISA_ARCV2 + +choice + prompt "ARC Instruction Set" + default ISA_ARCOMPACT + +config ISA_ARCOMPACT + bool "ARCompact ISA" + help + The original ARC ISA of ARC600/700 cores + +config ISA_ARCV2 + bool "ARC ISA v2" + help + ISA for the Next Generation ARC-HS cores + +endchoice choice prompt "CPU selection" - default CPU_ARC770D + default CPU_ARC770D if ISA_ARCOMPACT + default CPU_ARCHS38 if ISA_ARCV2 config CPU_ARC750D bool "ARC 750D" select ARC_MMU_V2 + depends on ISA_ARCOMPACT help Choose this option to build an U-Boot for ARC750D CPU. config CPU_ARC770D bool "ARC 770D" select ARC_MMU_V3 + depends on ISA_ARCOMPACT help Choose this option to build an U-Boot for ARC770D CPU. +config CPU_ARCEM6 + bool "ARC EM6" + select ARC_MMU_ABSENT + depends on ISA_ARCV2 + help + Next Generation ARC Core based on ISA-v2 ISA without MMU. + +config CPU_ARCHS36 + bool "ARC HS36" + select ARC_MMU_ABSENT + depends on ISA_ARCV2 + help + Next Generation ARC Core based on ISA-v2 ISA without MMU. + +config CPU_ARCHS38 + bool "ARC HS38" + select ARC_MMU_V4 + depends on ISA_ARCV2 + help + Next Generation ARC Core based on ISA-v2 ISA with MMU. + endchoice choice prompt "MMU Version" default ARC_MMU_V3 if CPU_ARC770D default ARC_MMU_V2 if CPU_ARC750D + default ARC_MMU_ABSENT if CPU_ARCEM6 + default ARC_MMU_ABSENT if CPU_ARCHS36 + default ARC_MMU_V4 if CPU_ARCHS38 + +config ARC_MMU_ABSENT + bool "No MMU" + help + No MMU config ARC_MMU_V2 bool "MMU v2" @@ -48,6 +97,12 @@ config ARC_MMU_V3 Variable Page size (1k-16k), var JTLB size 128 x (2 or 4) Shared Address Spaces (SASID) +config ARC_MMU_V4 + bool "MMU v4" + depends on CPU_ARCHS38 + help + Introduced as a part of ARC HS38 release. + endchoice config CPU_BIG_ENDIAN diff --git a/arch/arc/config.mk b/arch/arc/config.mk index f1e81b6..4fcd407 100644 --- a/arch/arc/config.mk +++ b/arch/arc/config.mk @@ -38,6 +38,18 @@ ifdef CONFIG_CPU_ARC770D PLATFORM_CPPFLAGS += -marc700 -mlock -mswape endif +ifdef CONFIG_CPU_ARCEM6 +PLATFORM_CPPFLAGS += -marcem +endif + +ifdef CONFIG_CPU_ARCHS34 +PLATFORM_CPPFLAGS += -marchs +endif + +ifdef CONFIG_CPU_ARCHS38 +PLATFORM_CPPFLAGS += -marchs +endif + PLATFORM_CPPFLAGS += -ffixed-r25 -D__ARC__ -gdwarf-2 # Needed for relocation diff --git a/arch/arc/cpu/arcv2/Makefile b/arch/arc/cpu/arcv2/Makefile new file mode 100644 index 0000000..cc69e5a --- /dev/null +++ b/arch/arc/cpu/arcv2/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2013-2015 Synopsys, Inc. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += start.o diff --git a/arch/arc/cpu/arcv2/start.S b/arch/arc/cpu/arcv2/start.S new file mode 100644 index 0000000..3ce6896 --- /dev/null +++ b/arch/arc/cpu/arcv2/start.S @@ -0,0 +1,254 @@ +/* + * Copyright (C) 2013-2015 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm-offsets.h> +#include <config.h> +#include <asm/arcregs.h> + +/* + * Note on the LD/ST addressing modes with address register write-back + * + * LD.a same as LD.aw + * + * LD.a reg1, [reg2, x] => Pre Incr + * Eff Addr for load = [reg2 + x] + * + * LD.ab reg1, [reg2, x] => Post Incr + * Eff Addr for load = [reg2] + */ + +.macro PUSH reg + st.a \reg, [%sp, -4] +.endm + +.macro PUSHAX aux + lr %r9, [\aux] + PUSH %r9 +.endm + +.macro SAVE_R1_TO_R24 + PUSH %r1 + PUSH %r2 + PUSH %r3 + PUSH %r4 + PUSH %r5 + PUSH %r6 + PUSH %r7 + PUSH %r8 + PUSH %r9 + PUSH %r10 + PUSH %r11 + PUSH %r12 + PUSH %r13 + PUSH %r14 + PUSH %r15 + PUSH %r16 + PUSH %r17 + PUSH %r18 + PUSH %r19 + PUSH %r20 + PUSH %r21 + PUSH %r22 + PUSH %r23 + PUSH %r24 +.endm + +.macro SAVE_ALL_SYS + /* saving %r0 to reg->r0 in advance since weread %ecr into it */ + st %r0, [%sp, -8] + lr %r0, [%ecr] /* all stack addressing is manual so far */ + st %r0, [%sp] + st %sp, [%sp, -4] + /* now move %sp to reg->r0 position so we can do "push" automatically */ + sub %sp, %sp, 8 + + SAVE_R1_TO_R24 + PUSH %r25 + PUSH %gp + PUSH %fp + PUSH %blink + PUSHAX %eret + PUSHAX %erstatus + PUSH %lp_count + PUSHAX %lp_end + PUSHAX %lp_start + PUSHAX %erbta +.endm + +.macro SAVE_EXCEPTION_SOURCE +#ifdef CONFIG_MMU + /* If MMU exists exception faulting address is loaded in EFA reg */ + lr %r0, [%efa] +#else + /* Otherwise in ERET (exception return) reg */ + lr %r0, [%eret] +#endif +.endm + +.section .ivt, "a",@progbits +.align 4 + /* Critical system events */ +.word _start /* 0 - 0x000 */ +.word memory_error /* 1 - 0x008 */ +.word instruction_error /* 2 - 0x010 */ + + /* Exceptions */ +.word EV_MachineCheck /* 0x100, Fatal Machine check (0x20) */ +.word EV_TLBMissI /* 0x108, Intruction TLB miss (0x21) */ +.word EV_TLBMissD /* 0x110, Data TLB miss (0x22) */ +.word EV_TLBProtV /* 0x118, Protection Violation (0x23) + or Misaligned Access */ +.word EV_PrivilegeV /* 0x120, Privilege Violation (0x24) */ +.word EV_Trap /* 0x128, Trap exception (0x25) */ +.word EV_Extension /* 0x130, Extn Intruction Excp (0x26) */ + + /* Device interrupts */ +.rept 29 + j interrupt_handler /* 3:31 - 0x018:0xF8 */ +.endr + +.text +.globl _start +_start: + /* Setup interrupt vector base that matches "__text_start" */ + sr __ivt_start, [ARC_AUX_INTR_VEC_BASE] + + /* Setup stack pointer */ + mov %sp, CONFIG_SYS_INIT_SP_ADDR + mov %fp, %sp + + /* Clear bss */ + mov %r0, __bss_start + mov %r1, __bss_end + +clear_bss: + st.ab 0, [%r0, 4] + brlt %r0, %r1, clear_bss + + /* Zero the one and only argument of "board_init_f" */ + mov_s %r0, 0 + j board_init_f + +memory_error: + SAVE_ALL_SYS + SAVE_EXCEPTION_SOURCE + mov %r1, %sp + j do_memory_error + +instruction_error: + SAVE_ALL_SYS + SAVE_EXCEPTION_SOURCE + mov %r1, %sp + j do_instruction_error + +interrupt_handler: + /* Todo - save and restore CPU context when interrupts will be in use */ + bl do_interrupt_handler + rtie + +EV_MachineCheck: + SAVE_ALL_SYS + SAVE_EXCEPTION_SOURCE + mov %r1, %sp + j do_machine_check_fault + +EV_TLBMissI: + SAVE_ALL_SYS + mov %r0, %sp + j do_itlb_miss + +EV_TLBMissD: + SAVE_ALL_SYS + mov %r0, %sp + j do_dtlb_miss + +EV_TLBProtV: + SAVE_ALL_SYS + SAVE_EXCEPTION_SOURCE + mov %r1, %sp + j do_tlb_prot_violation + +EV_PrivilegeV: + SAVE_ALL_SYS + mov %r0, %sp + j do_privilege_violation + +EV_Trap: + SAVE_ALL_SYS + mov %r0, %sp + j do_trap + +EV_Extension: + SAVE_ALL_SYS + mov %r0, %sp + j do_extension + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * r0 = start_addr_sp + * r1 = new__gd + * r2 = relocaddr + */ +.align 4 +.globl relocate_code +relocate_code: + /* + * r0-r12 might be clobbered by C functions + * so we use r13-r16 for storage here + */ + mov %r13, %r0 /* save addr_sp */ + mov %r14, %r1 /* save addr of gd */ + mov %r15, %r2 /* save addr of destination */ + + mov %r16, %r2 /* %r9 - relocation offset */ + sub %r16, %r16, __image_copy_start + +/* Set up the stack */ +stack_setup: + mov %sp, %r13 + mov %fp, %sp + +/* Check if monitor is loaded right in place for relocation */ + mov %r0, __image_copy_start + cmp %r0, %r15 /* skip relocation if code loaded */ + bz do_board_init_r /* in target location already */ + +/* Copy data (__image_copy_start - __image_copy_end) to new location */ + mov %r1, %r15 + mov %r2, __image_copy_end + sub %r2, %r2, %r0 /* r3 <- amount of bytes to copy */ + asr %r2, %r2, 2 /* r3 <- amount of words to copy */ + mov %lp_count, %r2 + lp copy_end + ld.ab %r2,[%r0,4] + st.ab %r2,[%r1,4] +copy_end: + +/* Fix relocations related issues */ + bl do_elf_reloc_fixups +#ifndef CONFIG_SYS_ICACHE_OFF + bl invalidate_icache_all +#endif +#ifndef CONFIG_SYS_DCACHE_OFF + bl flush_dcache_all +#endif + +/* Update position of intterupt vector table */ + lr %r0, [ARC_AUX_INTR_VEC_BASE] /* Read current position */ + add %r0, %r0, %r16 /* Update address */ + sr %r0, [ARC_AUX_INTR_VEC_BASE] /* Write new position */ + +do_board_init_r: +/* Prepare for exection of "board_init_r" in relocated monitor */ + mov %r2, board_init_r /* old address of "board_init_r()" */ + add %r2, %r2, %r16 /* new address of "board_init_r()" */ + mov %r0, %r14 /* 1-st parameter: gd_t */ + mov %r1, %r15 /* 2-nd parameter: dest_addr */ + j [%r2] diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index 2725961..8a77cd9 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -17,10 +17,14 @@ #define ARCH_DMA_MINALIGN 128 #endif -#if defined(CONFIG_ARC_MMU_V2) +#if defined(ARC_MMU_ABSENT) +#define CONFIG_ARC_MMU_VER 0 +#elif defined(CONFIG_ARC_MMU_V2) #define CONFIG_ARC_MMU_VER 2 #elif defined(CONFIG_ARC_MMU_V3) #define CONFIG_ARC_MMU_VER 3 +#elif defined(CONFIG_ARC_MMU_V4) +#define CONFIG_ARC_MMU_VER 4 #endif #endif /* __ASM_ARC_CACHE_H */ diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1f1ccad..41f3220 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -839,6 +839,8 @@ endchoice source "arch/arm/cpu/arm926ejs/davinci/Kconfig" +source "arch/arm/cpu/arm1176/bcm2835/Kconfig" + source "arch/arm/cpu/armv7/exynos/Kconfig" source "arch/arm/cpu/armv7/highbank/Kconfig" diff --git a/arch/arm/cpu/arm1176/bcm2835/Kconfig b/arch/arm/cpu/arm1176/bcm2835/Kconfig new file mode 100644 index 0000000..94f57d7 --- /dev/null +++ b/arch/arm/cpu/arm1176/bcm2835/Kconfig @@ -0,0 +1,12 @@ +if TARGET_RPI + +config DM + default y if !SPL_BUILD + +config DM_SERIAL + default y if !SPL_BUILD + +config DM_GPIO + default y if !SPL_BUILD + +endif diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index 7fcb5d2..2064efa 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -65,6 +65,27 @@ endchoice config SYS_SOC default "exynos" +config DM + default y if !SPL_BUILD + +config DM_SERIAL + default y if !SPL_BUILD + +config DM_SPI + default y if !SPL_BUILD + +config DM_SPI_FLASH + default y if !SPL_BUILD + +config DM_GPIO + default y if !SPL_BUILD + +config SYS_MALLOC_F + default y if !SPL_BUILD + +config SYS_MALLOC_F_LEN + default 0x400 if !SPL_BUILD + source "board/samsung/smdkv310/Kconfig" source "board/samsung/trats/Kconfig" source "board/samsung/universal_c210/Kconfig" diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig index a029379..4644098 100644 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -93,6 +93,21 @@ config TARGET_TWISTER endchoice +config DM + default y if !SPL_BUILD + +config DM_GPIO + default y if DM && !SPL_BUILD + +config DM_SERIAL + default y if DM && !SPL_BUILD + +config SYS_MALLOC_F + default y if DM && !SPL_BUILD + +config SYS_MALLOC_F_LEN + default 0x400 if DM && !SPL_BUILD + config SYS_SOC default "omap3" diff --git a/arch/arm/cpu/armv7/rmobile/Kconfig b/arch/arm/cpu/armv7/rmobile/Kconfig index 6d94199..3586650 100644 --- a/arch/arm/cpu/armv7/rmobile/Kconfig +++ b/arch/arm/cpu/armv7/rmobile/Kconfig @@ -21,6 +21,9 @@ config TARGET_KZM9G config TARGET_ALT bool "Alt board" +config TARGET_SILK + bool "Silk board" + endchoice config SYS_SOC @@ -28,7 +31,7 @@ config SYS_SOC config RMOBILE_EXTRAM_BOOT bool "Enable boot from RAM" - depends on TARGET_ALT || TARGET_KOELSCH || TARGET_LAGER + depends on TARGET_ALT || TARGET_KOELSCH || TARGET_LAGER || TARGET_SILK default n source "board/atmark-techno/armadillo-800eva/Kconfig" @@ -37,5 +40,6 @@ source "board/renesas/koelsch/Kconfig" source "board/renesas/lager/Kconfig" source "board/kmc/kzm9g/Kconfig" source "board/renesas/alt/Kconfig" +source "board/renesas/silk/Kconfig" endif diff --git a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S index d47546a..a5dbbea 100644 --- a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S +++ b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S @@ -40,7 +40,7 @@ do_lowlevel_init: and r1, r1, #0x7F00 lsrs r1, r1, #8 cmp r1, #0x4C /* 0x4C is ID of r8a7794 */ - beq _exit_init_l2_a15 + beq _enable_actlr_smp /* surpress wfe if ca15 */ tst r4, #4 @@ -64,6 +64,16 @@ do_lowlevel_init: orrne r0, r0, #0x20 /* L2CTLR[5] */ #endif mcrne p15, 1, r0, c9, c0, 2 + + b _exit_init_l2_a15 + +_enable_actlr_smp: /* R8A7794 only (CA7) */ +#ifndef CONFIG_DCACHE_OFF + mrc p15, 0, r0, c1, c0, 1 + orr r0, r0, #0x40 + mcr p15, 0, r0, c1, c0, 1 +#endif + _exit_init_l2_a15: ldr r3, =(CONFIG_SYS_INIT_SP_ADDR) sub sp, r3, #4 diff --git a/arch/arm/cpu/armv7/tegra-common/Kconfig b/arch/arm/cpu/armv7/tegra-common/Kconfig index 1446452..ee32469 100644 --- a/arch/arm/cpu/armv7/tegra-common/Kconfig +++ b/arch/arm/cpu/armv7/tegra-common/Kconfig @@ -17,9 +17,33 @@ config TEGRA124 endchoice +config SYS_MALLOC_F + default y + +config SYS_MALLOC_F_LEN + default 0x1800 + config USE_PRIVATE_LIBGCC default y if SPL_BUILD +config DM + default y if !SPL_BUILD + +config DM_SERIAL + default y if !SPL_BUILD + +config DM_SPI + default y if !SPL_BUILD + +config DM_SPI_FLASH + default y if !SPL_BUILD + +config DM_I2C + default y if !SPL_BUILD + +config DM_GPIO + default y if !SPL_BUILD + source "arch/arm/cpu/armv7/tegra20/Kconfig" source "arch/arm/cpu/armv7/tegra30/Kconfig" source "arch/arm/cpu/armv7/tegra114/Kconfig" diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig index 5c5a84f..1a47ac9 100644 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -48,6 +48,12 @@ config DCC_MICRO_SUPPORT_CARD endchoice +config SYS_MALLOC_F + default y + +config SYS_MALLOC_F_LEN + default 0x2000 + config CMD_PINMON bool "Enable boot mode pins monitor command" default y diff --git a/arch/arm/include/asm/arch-at91/at91_pio.h b/arch/arm/include/asm/arch-at91/at91_pio.h index 50464ff..3012278 100644 --- a/arch/arm/include/asm/arch-at91/at91_pio.h +++ b/arch/arm/include/asm/arch-at91/at91_pio.h @@ -114,14 +114,10 @@ typedef union at91_pio { at91_port_t pioa; at91_port_t piob; at91_port_t pioc; - #if (ATMEL_PIO_PORTS > 3) - at91_port_t piod; - #endif - #if (ATMEL_PIO_PORTS > 4) - at91_port_t pioe; - #endif - } ; - at91_port_t port[ATMEL_PIO_PORTS]; + at91_port_t piod; /* not present in all hardware */ + at91_port_t pioe;/* not present in all hardware */ + }; + at91_port_t port[5]; } at91_pio_t; #ifdef CONFIG_AT91_GPIO diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c index 71bb9d7..7202c3f 100644 --- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c +++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c @@ -424,6 +424,14 @@ phys_size_t initdram(int board_type) int write_recovery; phys_size_t dram_size = 0; + if (IS_ENABLED(CONFIG_SYS_RAMBOOT)) { + /* + * Reduce RAM size to avoid overwriting memory used by + * current stack? Not sure what is happening. + */ + return sdram_memsize() / 2; + } + num_dimm_banks = sizeof(iic0_dimm_addr); /*------------------------------------------------------------------ diff --git a/arch/powerpc/cpu/ppc4xx/config.mk b/arch/powerpc/cpu/ppc4xx/config.mk index f87c9dc..9cb41bb 100644 --- a/arch/powerpc/cpu/ppc4xx/config.mk +++ b/arch/powerpc/cpu/ppc4xx/config.mk @@ -7,10 +7,7 @@ PLATFORM_CPPFLAGS += -mstring -msoft-float -cfg=$(srctree)/include/configs/$(CONFIG_SYS_CONFIG_NAME:"%"=%).h -is440:=$(shell grep CONFIG_440 $(cfg)) - -ifneq (,$(findstring CONFIG_440,$(is440))) +ifneq (,$(CONFIG_440)) PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440 else PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405 diff --git a/arch/powerpc/cpu/ppc4xx/cpu_init.c b/arch/powerpc/cpu/ppc4xx/cpu_init.c index e5a0e21..5f5c720 100644 --- a/arch/powerpc/cpu/ppc4xx/cpu_init.c +++ b/arch/powerpc/cpu/ppc4xx/cpu_init.c @@ -450,10 +450,12 @@ cpu_init_f (void) PLB4Ax_ACR_RDP_4DEEP); #endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */ +#ifndef CONFIG_SYS_GENERIC_BOARD gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); /* Clear initial global data */ memset((void *)gd, 0, sizeof(gd_t)); +#endif } /* diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index 09a02d7..7a0f0d2 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -760,6 +760,15 @@ _start: #endif bl cpu_init_f /* run low-level CPU init code (from Flash) */ +#ifdef CONFIG_SYS_GENERIC_BOARD + mr r3, r1 + bl board_init_f_mem + mr r1, r3 + li r0,0 + stwu r0, -4(r1) + stwu r0, -4(r1) +#endif + li r3, 0 bl board_init_f /* NOTREACHED - board_init_f() does not return */ @@ -1027,7 +1036,14 @@ _start: GET_GOT /* initialize GOT access */ bl cpu_init_f /* run low-level CPU init code (from Flash) */ - +#ifdef CONFIG_SYS_GENERIC_BOARD + mr r3, r1 + bl board_init_f_mem + mr r1, r3 + stwu r0, -4(r1) + stwu r0, -4(r1) +#endif + li r3, 0 bl board_init_f /* run first part of init code (from Flash) */ /* NOTREACHED - board_init_f() does not return */ diff --git a/arch/powerpc/cpu/ppc4xx/u-boot.lds b/arch/powerpc/cpu/ppc4xx/u-boot.lds index 8773178..1980508 100644 --- a/arch/powerpc/cpu/ppc4xx/u-boot.lds +++ b/arch/powerpc/cpu/ppc4xx/u-boot.lds @@ -76,9 +76,13 @@ SECTIONS . = ALIGN(256); __init_begin = .; .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); + .data.init : { + *(.data.init) + . = ALIGN(256); + LONG(0) LONG(0) /* Extend u-boot.bin to here */ + } __init_end = .; + _end = .; #ifndef CONFIG_SPL #ifdef CONFIG_440 diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile new file mode 100644 index 0000000..ad104b9 --- /dev/null +++ b/arch/powerpc/dts/Makefile @@ -0,0 +1,11 @@ +dtb-$(CONFIG_TARGET_CANYONLANDS) += arches.dtb canyonlands.dtb glacier.dtb + +targets += $(dtb-y) + +DTC_FLAGS += -R 4 -p 0x1000 + +PHONY += dtbs +dtbs: $(addprefix $(obj)/, $(dtb-y)) + @: + +clean-files := *.dtb diff --git a/arch/powerpc/dts/arches.dts b/arch/powerpc/dts/arches.dts new file mode 100644 index 0000000..bd5ebfd --- /dev/null +++ b/arch/powerpc/dts/arches.dts @@ -0,0 +1,339 @@ +/* + * Device Tree Source for AMCC Arches (dual 460GT board) + * + * (C) Copyright 2008 Applied Micro Circuits Corporation + * Victor Gallardo <vgallardo@amcc.com> + * Adam Graham <agraham@amcc.com> + * + * Based on the glacier.dts file + * Stefan Roese <sr@denx.de> + * Copyright 2008 DENX Software Engineering + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,arches"; + compatible = "amcc,arches"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + ethernet2 = &EMAC2; + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460GT"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + next-level-cache = <&L2C0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460gt"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460gt"; + dcr-reg = <0x00c 0x002>; + }; + + L2C0: l2c { + compatible = "ibm,l2-cache-460gt", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + + plb { + compatible = "ibm,plb-460gt", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460gt", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <3>; + num-rx-chans = <24>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; + desc-base-addr-high = <0x8>; + }; + + POB0: opb { + compatible = "ibm,opb-460gt", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460gt", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x01b60000>; + }; + partition@1f60000 { + label = "env"; + reg = <0x01f60000 0x00040000>; + }; + partition@1fa0000 { + label = "u-boot"; + reg = <0x01fa0000 0x00060000>; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + sttm@4a { + compatible = "ad,ad7414"; + reg = <0x4a>; + interrupt-parent = <&UIC1>; + interrupts = <0x0 0x8>; + }; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <0xef601350 0x00000030>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <0xef601450 0x00000030>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4 + /*Wake*/ 0x1 &UIC2 0x14 0x4>; + reg = <0xef600e00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "sgmii"; + phy-map = <0xffffffff>; + gpcs-address = <0x0000000a>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4 + /*Wake*/ 0x1 &UIC2 0x15 0x4>; + reg = <0xef600f00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "sgmii"; + phy-map = <0x00000000>; + gpcs-address = <0x0000000b>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC2: ethernet@ef601100 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC2>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4 + /*Wake*/ 0x1 &UIC2 0x16 0x4>; + reg = <0xef601100 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <16>; + cell-index = <2>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ + phy-mode = "sgmii"; + phy-map = <0x00000001>; + gpcs-address = <0x0000000C>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + }; +}; diff --git a/arch/powerpc/dts/canyonlands.dts b/arch/powerpc/dts/canyonlands.dts new file mode 100644 index 0000000..0a2f5d7 --- /dev/null +++ b/arch/powerpc/dts/canyonlands.dts @@ -0,0 +1,561 @@ +/* + * Device Tree Source for AMCC Canyonlands (460EX) + * + * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,canyonlands"; + compatible = "amcc,canyonlands"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + chosen { + stdout-path = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460EX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + next-level-cache = <&L2C0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460ex"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460ex"; + dcr-reg = <0x00c 0x002>; + }; + + CPM0: cpm { + compatible = "ibm,cpm"; + dcr-access-method = "native"; + dcr-reg = <0x160 0x003>; + unused-units = <0x00000100>; + idle-doze = <0x02000000>; + standby = <0xfeff791d>; + }; + + L2C0: l2c { + compatible = "ibm,l2-cache-460ex", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + + plb { + compatible = "ibm,plb-460ex", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460ex", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + + HWRNG: hwrng@110000 { + compatible = "amcc,ppc460ex-rng", "ppc4xx-rng"; + reg = <4 0x00110000 0x50>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460ex", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <16>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; + }; + + USB0: ehci@bffd0400 { + compatible = "ibm,usb-ehci-460ex", "usb-ehci"; + interrupt-parent = <&UIC2>; + interrupts = <0x1d 4>; + reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>; + }; + + USB1: usb@bffd0000 { + compatible = "ohci-le"; + reg = <4 0xbffd0000 0x60>; + interrupt-parent = <&UIC2>; + interrupts = <0x1e 4>; + }; + + USBOTG0: usbotg@bff80000 { + compatible = "amcc,dwc-otg"; + reg = <0x4 0xbff80000 0x10000>; + interrupt-parent = <&USBOTG0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupts = <0x0 0x1 0x2>; + interrupt-map = </* USB-OTG */ 0x0 &UIC2 0x1c 0x4 + /* HIGH-POWER */ 0x1 &UIC1 0x1a 0x8 + /* DMA */ 0x2 &UIC0 0xc 0x4>; + }; + + SATA0: sata@bffd1000 { + compatible = "amcc,sata-460ex"; + reg = <4 0xbffd1000 0x800 4 0xbffd0800 0x400>; + interrupt-parent = <&UIC3>; + interrupts = <0x0 0x4 /* SATA */ + 0x5 0x4>; /* AHBDMA */ + }; + + POB0: opb { + compatible = "ibm,opb-460ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460ex", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02560000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + cpld@2,0 { + compatible = "amcc,ppc460ex-bcsr"; + reg = <2 0x0 0x9>; + }; + + ndfc@3,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@100000 { + label = "user"; + reg = <0x00000000 0x03f00000>; + }; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + reg-shift = <0>; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <0x1 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + reg-shift = <0>; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460ex", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC2>; + interrupts = <0x19 0x8>; + }; + sttm@48 { + compatible = "ad,ad7414"; + reg = <0x48>; + interrupt-parent = <&UIC1>; + interrupts = <0x14 0x8>; + }; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460ex", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + GPIO0: gpio@ef600b00 { + compatible = "ibm,ppc4xx-gpio"; + reg = <0xef600b00 0x00000048>; + gpio-controller; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-460ex", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii-460ex", "ibm,rgmii"; + reg = <0xef601500 0x00000008>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460ex", "ibm,tah"; + reg = <0xef601350 0x00000030>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460ex", "ibm,tah"; + reg = <0xef601450 0x00000030>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4 + /*Wake*/ 0x1 &UIC2 0x14 0x4>; + reg = <0xef600e00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4 + /*Wake*/ 0x1 &UIC2 0x15 0x4>; + reg = <0xef600f00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 0 to 0x3f */ + bus-range = <0x0 0x3f>; + + /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x08010000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <0x40 0x7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x08011000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 80 to 0xbf */ + bus-range = <0x80 0xbf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>; + }; + + MSI: ppc4xx-msi@C10000000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = < 0xC 0x10000000 0x100>; + sdr-base = <0x36C>; + msi-data = <0x00000000>; + msi-mask = <0x44440000>; + interrupt-count = <3>; + interrupts = <0 1 2 3>; + interrupt-parent = <&UIC3>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC3 0x18 1 + 1 &UIC3 0x19 1 + 2 &UIC3 0x1A 1 + 3 &UIC3 0x1B 1>; + }; + }; +}; diff --git a/arch/powerpc/dts/glacier.dts b/arch/powerpc/dts/glacier.dts new file mode 100644 index 0000000..bb4e819 --- /dev/null +++ b/arch/powerpc/dts/glacier.dts @@ -0,0 +1,582 @@ +/* + * Device Tree Source for AMCC Glacier (460GT) + * + * Copyright 2008-2010 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,glacier"; + compatible = "amcc,glacier"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + ethernet2 = &EMAC2; + ethernet3 = &EMAC3; + serial0 = &UART0; + serial1 = &UART1; + }; + + chosen { + stdout-path = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460GT"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + next-level-cache = <&L2C0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460gt"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460gt"; + dcr-reg = <0x00c 0x002>; + }; + + L2C0: l2c { + compatible = "ibm,l2-cache-460gt", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + + plb { + compatible = "ibm,plb-460gt", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460gt", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460gt-crypto", "amcc,ppc460ex-crypto", + "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + + HWRNG: hwrng@110000 { + compatible = "amcc,ppc460ex-rng", "ppc4xx-rng"; + reg = <4 0x00110000 0x50>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <32>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; + desc-base-addr-high = <0x8>; + }; + + POB0: opb { + compatible = "ibm,opb-460gt", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460gt", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02560000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + ndfc@3,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@100000 { + label = "user"; + reg = <0x00000000 0x03f00000>; + }; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + reg-shift = <0>; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <0x1 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + reg-shift = <0>; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + reg-shift = <0>; + compatible = "ns16550"; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <28 0x4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + reg-shift = <0>; + compatible = "ns16550"; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <29 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC2>; + interrupts = <0x19 0x8>; + }; + sttm@48 { + compatible = "ad,ad7414"; + reg = <0x48>; + interrupt-parent = <&UIC1>; + interrupts = <0x14 0x8>; + }; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-460gt", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii-460gt", "ibm,rgmii"; + reg = <0xef601500 0x00000008>; + has-mdio; + }; + + RGMII1: emac-rgmii@ef601600 { + compatible = "ibm,rgmii-460gt", "ibm,rgmii"; + reg = <0xef601600 0x00000008>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <0xef601350 0x00000030>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <0xef601450 0x00000030>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4 + /*Wake*/ 0x1 &UIC2 0x14 0x4>; + reg = <0xef600e00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4 + /*Wake*/ 0x1 &UIC2 0x15 0x4>; + reg = <0xef600f00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC2: ethernet@ef601100 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC2>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4 + /*Wake*/ 0x1 &UIC2 0x16 0x4>; + reg = <0xef601100 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <16>; + cell-index = <2>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC3: ethernet@ef601200 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC3>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4 + /*Wake*/ 0x1 &UIC2 0x17 0x4>; + reg = <0xef601200 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <3>; + mal-rx-channel = <24>; + cell-index = <3>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 0 to 0x3f */ + bus-range = <0x0 0x3f>; + + /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x08010000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <0x40 0x7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x08011000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 80 to 0xbf */ + bus-range = <0x80 0xbf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/include/asm/arch-ppc4xx/gpio.h b/arch/powerpc/include/asm/arch-ppc4xx/gpio.h new file mode 100644 index 0000000..3d960c3 --- /dev/null +++ b/arch/powerpc/include/asm/arch-ppc4xx/gpio.h @@ -0,0 +1,7 @@ +/* + * (C) Copyright 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* This is empty for now as we don't support the generic GPIO interface */ diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h new file mode 100644 index 0000000..559b42e --- /dev/null +++ b/arch/powerpc/include/asm/linkage.h @@ -0,0 +1,7 @@ +/* + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* We don't need anything here at present */ diff --git a/arch/powerpc/include/asm/ppc460ex_gt.h b/arch/powerpc/include/asm/ppc460ex_gt.h index f41df0d..ea019aa 100644 --- a/arch/powerpc/include/asm/ppc460ex_gt.h +++ b/arch/powerpc/include/asm/ppc460ex_gt.h @@ -19,10 +19,12 @@ /* Memory mapped registers */ #define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* Internal Peripherals */ +#ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0400) #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_PERIPHERAL_BASE + 0x0500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_PERIPHERAL_BASE + 0x0600) +#endif #define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0b00) #define GPIO1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0c00) diff --git a/arch/sandbox/Kconfig b/arch/sandbox/Kconfig index 3057325..2098b9c 100644 --- a/arch/sandbox/Kconfig +++ b/arch/sandbox/Kconfig @@ -10,4 +10,28 @@ config SYS_BOARD config SYS_CONFIG_NAME default "sandbox" +config DM + default y + +config DM_GPIO + default y + +config DM_SERIAL + default y + +config DM_CROS_EC + default y + +config DM_SPI + default y + +config DM_SPI_FLASH + default y + +config DM_I2C + default y + +config DM_TEST + default y + endmenu diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index fef11f3..35d24e4 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -67,6 +67,21 @@ config TARGET_GALILEO endchoice +config DM + default y + +config DM_GPIO + default y + +config DM_SERIAL + default y + +config SYS_MALLOC_F + default y + +config SYS_MALLOC_F_LEN + default 0x800 + config RAMBASE hex default 0x100000 diff --git a/board/amcc/canyonlands/Kconfig b/board/amcc/canyonlands/Kconfig index 530a6ef..848e08f 100644 --- a/board/amcc/canyonlands/Kconfig +++ b/board/amcc/canyonlands/Kconfig @@ -9,4 +9,42 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "canyonlands" +choice BOARD_TYPE + prompt "Select which board to build for" + +config CANYONLANDS + bool "Glacier" + help + Select this to build for the Canyonlands 460EX board. + +config GLACIER + bool "Glacier" + help + Select this to build for the Glacier 460GT board. + +config ARCHES + bool "Arches" + help + Select this to build for the Arches dual 460GT board. + +endchoice + +config DISPLAY_BOARDINFO + bool + default y + +config DM + default y + +config DM_SERIAL + default y + +config SYS_MALLOC_F + bool + default y + +config SYS_MALLOC_F_LEN + hex + default 0x400 + endif diff --git a/board/amcc/canyonlands/MAINTAINERS b/board/amcc/canyonlands/MAINTAINERS index 52bf004..8be8a52 100644 --- a/board/amcc/canyonlands/MAINTAINERS +++ b/board/amcc/canyonlands/MAINTAINERS @@ -6,3 +6,4 @@ F: include/configs/canyonlands.h F: configs/arches_defconfig F: configs/canyonlands_defconfig F: configs/glacier_defconfig +F: configs/glacier_ramboot_defconfig diff --git a/board/amcc/canyonlands/config.mk b/board/amcc/canyonlands/config.mk index 63b8973..5cc90d2 100644 --- a/board/amcc/canyonlands/config.mk +++ b/board/amcc/canyonlands/config.mk @@ -8,8 +8,6 @@ # AMCC 460EX/460GT Evaluation Board (Canyonlands) board # -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG endif diff --git a/board/amcc/canyonlands/u-boot-ram.lds b/board/amcc/canyonlands/u-boot-ram.lds new file mode 100644 index 0000000..1750c74 --- /dev/null +++ b/board/amcc/canyonlands/u-boot-ram.lds @@ -0,0 +1,85 @@ +/* + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .text : + { + _image_copy_start = .; + arch/powerpc/cpu/ppc4xx/start.o (.text*) + board/amcc/canyonlands/init.o (.text*) + + *(.text*) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + KEEP(*(.got)) + _GOT2_TABLE_ = .; + KEEP(*(.got2)) + _FIXUP_TABLE_ = .; + KEEP(*(.fixup)) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data*) + *(.sdata*) + } + _edata = .; + PROVIDE (edata = .); + + . = .; + + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { + *(.data.init) + . = ALIGN(256); + LONG(0) LONG(0) /* Extend u-boot.bin to here */ + } + __init_end = .; + _end = .; + _image_binary_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.bss*) + *(.sbss*) + *(COMMON) + . = ALIGN(4); + } + + __bss_end = . ; + PROVIDE (end = .); +} diff --git a/board/compulab/cm_t335/Kconfig b/board/compulab/cm_t335/Kconfig index 683efde..aadbfbc 100644 --- a/board/compulab/cm_t335/Kconfig +++ b/board/compulab/cm_t335/Kconfig @@ -12,4 +12,13 @@ config SYS_SOC config SYS_CONFIG_NAME default "cm_t335" +config DM + default y if !SPL_BUILD + +config DM_GPIO + default y if !SPL_BUILD + +config DM_SERIAL + default y if !SPL_BUILD + endif diff --git a/board/gumstix/pepper/Kconfig b/board/gumstix/pepper/Kconfig index 6f94612..3099a9e 100644 --- a/board/gumstix/pepper/Kconfig +++ b/board/gumstix/pepper/Kconfig @@ -12,4 +12,13 @@ config SYS_SOC config SYS_CONFIG_NAME default "pepper" +config DM + default y if !SPL_BUILD + +config DM_GPIO + default y if !SPL_BUILD + +config DM_SERIAL + default y if !SPL_BUILD + endif diff --git a/board/isee/igep0033/Kconfig b/board/isee/igep0033/Kconfig index e989e4b..2fe2ef1 100644 --- a/board/isee/igep0033/Kconfig +++ b/board/isee/igep0033/Kconfig @@ -12,4 +12,13 @@ config SYS_SOC config SYS_CONFIG_NAME default "am335x_igep0033" +config DM + default y if !SPL_BUILD + +config DM_GPIO + default y if !SPL_BUILD + +config DM_SERIAL + default y if !SPL_BUILD + endif diff --git a/board/phytec/pcm051/Kconfig b/board/phytec/pcm051/Kconfig index 2cc0d88..65094cf 100644 --- a/board/phytec/pcm051/Kconfig +++ b/board/phytec/pcm051/Kconfig @@ -12,4 +12,13 @@ config SYS_SOC config SYS_CONFIG_NAME default "pcm051" +config DM + default y if !SPL_BUILD + +config DM_GPIO + default y if !SPL_BUILD + +config DM_SERIAL + default y if !SPL_BUILD + endif diff --git a/board/renesas/silk/Kconfig b/board/renesas/silk/Kconfig new file mode 100644 index 0000000..07aee0e --- /dev/null +++ b/board/renesas/silk/Kconfig @@ -0,0 +1,12 @@ +if TARGET_SILK + +config SYS_BOARD + default "silk" + +config SYS_VENDOR + default "renesas" + +config SYS_CONFIG_NAME + default "silk" + +endif diff --git a/board/renesas/silk/MAINTAINERS b/board/renesas/silk/MAINTAINERS new file mode 100644 index 0000000..b566ccf --- /dev/null +++ b/board/renesas/silk/MAINTAINERS @@ -0,0 +1,6 @@ +SILK BOARD +M: Cogent Embedded, Inc. <source@cogentembedded.com> +S: Maintained +F: board/renesas/silk/ +F: include/configs/silk.h +F: configs/silk_defconfig diff --git a/board/renesas/silk/Makefile b/board/renesas/silk/Makefile new file mode 100644 index 0000000..e6eea61 --- /dev/null +++ b/board/renesas/silk/Makefile @@ -0,0 +1,10 @@ +# +# board/renesas/silk/Makefile +# +# Copyright (C) 2015 Renesas Electronics Corporation +# Copyright (C) 2015 Cogent Embedded, Inc. +# +# SPDX-License-Identifier: GPL-2.0 +# + +obj-y := silk.o qos.o ../rcar-gen2-common/common.o diff --git a/board/renesas/silk/qos.c b/board/renesas/silk/qos.c new file mode 100644 index 0000000..4f6e46c --- /dev/null +++ b/board/renesas/silk/qos.c @@ -0,0 +1,951 @@ +/* + * board/renesas/silk/qos.c + * + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + * + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/mach-types.h> +#include <asm/io.h> +#include <asm/arch/rmobile.h> + +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +/* QoS version 0.11 */ + +enum { + DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04, + DBSC3_05, DBSC3_06, DBSC3_07, DBSC3_08, DBSC3_09, + DBSC3_10, DBSC3_11, DBSC3_12, DBSC3_13, DBSC3_14, + DBSC3_15, + DBSC3_NR, +}; + +static u32 dbsc3_0_r_qos_addr[DBSC3_NR] = { + [DBSC3_00] = DBSC3_0_QOS_R0_BASE, + [DBSC3_01] = DBSC3_0_QOS_R1_BASE, + [DBSC3_02] = DBSC3_0_QOS_R2_BASE, + [DBSC3_03] = DBSC3_0_QOS_R3_BASE, + [DBSC3_04] = DBSC3_0_QOS_R4_BASE, + [DBSC3_05] = DBSC3_0_QOS_R5_BASE, + [DBSC3_06] = DBSC3_0_QOS_R6_BASE, + [DBSC3_07] = DBSC3_0_QOS_R7_BASE, + [DBSC3_08] = DBSC3_0_QOS_R8_BASE, + [DBSC3_09] = DBSC3_0_QOS_R9_BASE, + [DBSC3_10] = DBSC3_0_QOS_R10_BASE, + [DBSC3_11] = DBSC3_0_QOS_R11_BASE, + [DBSC3_12] = DBSC3_0_QOS_R12_BASE, + [DBSC3_13] = DBSC3_0_QOS_R13_BASE, + [DBSC3_14] = DBSC3_0_QOS_R14_BASE, + [DBSC3_15] = DBSC3_0_QOS_R15_BASE, +}; + +static u32 dbsc3_0_w_qos_addr[DBSC3_NR] = { + [DBSC3_00] = DBSC3_0_QOS_W0_BASE, + [DBSC3_01] = DBSC3_0_QOS_W1_BASE, + [DBSC3_02] = DBSC3_0_QOS_W2_BASE, + [DBSC3_03] = DBSC3_0_QOS_W3_BASE, + [DBSC3_04] = DBSC3_0_QOS_W4_BASE, + [DBSC3_05] = DBSC3_0_QOS_W5_BASE, + [DBSC3_06] = DBSC3_0_QOS_W6_BASE, + [DBSC3_07] = DBSC3_0_QOS_W7_BASE, + [DBSC3_08] = DBSC3_0_QOS_W8_BASE, + [DBSC3_09] = DBSC3_0_QOS_W9_BASE, + [DBSC3_10] = DBSC3_0_QOS_W10_BASE, + [DBSC3_11] = DBSC3_0_QOS_W11_BASE, + [DBSC3_12] = DBSC3_0_QOS_W12_BASE, + [DBSC3_13] = DBSC3_0_QOS_W13_BASE, + [DBSC3_14] = DBSC3_0_QOS_W14_BASE, + [DBSC3_15] = DBSC3_0_QOS_W15_BASE, +}; + +void qos_init(void) +{ + int i; + struct rcar_s3c *s3c; + struct rcar_s3c_qos *s3c_qos; + struct rcar_dbsc3_qos *qos_addr; + struct rcar_mxi *mxi; + struct rcar_mxi_qos *mxi_qos; + struct rcar_axi_qos *axi_qos; + + /* DBSC DBADJ2 */ + writel(0x20042004, DBSC3_0_DBADJ2); + + /* S3C -QoS */ + s3c = (struct rcar_s3c *)S3C_BASE; + writel(0x1F0D0B0A, &s3c->s3crorr); + writel(0x1F0D0B09, &s3c->s3cworr); + + /* QoS Control Registers */ + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI0_BASE; + writel(0x00890089, &s3c_qos->s3cqos0); + writel(0x20960010, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + writel(0x20AA2200, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960010, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + writel(0x20AA2200, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI1_BASE; + writel(0x00890089, &s3c_qos->s3cqos0); + writel(0x20960010, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + writel(0x20AA2200, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960010, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + writel(0x20AA2200, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_MXI_BASE; + writel(0x80928092, &s3c_qos->s3cqos0); + writel(0x20960020, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + writel(0x20AA20DC, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960020, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + writel(0x20AA20DC, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_AXI_BASE; + writel(0x00820082, &s3c_qos->s3cqos0); + writel(0x20960020, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + writel(0x20AA20FA, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960020, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + writel(0x20AA20FA, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + /* DBSC -QoS */ + /* DBSC0 - Read */ + for (i = DBSC3_00; i < DBSC3_NR; i++) { + qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_r_qos_addr[i]; + writel(0x00000002, &qos_addr->dblgcnt); + writel(0x0000207D, &qos_addr->dbtmval0); + writel(0x00002053, &qos_addr->dbtmval1); + writel(0x0000202A, &qos_addr->dbtmval2); + writel(0x00001FBD, &qos_addr->dbtmval3); + writel(0x00000001, &qos_addr->dbrqctr); + writel(0x00002064, &qos_addr->dbthres0); + writel(0x0000203E, &qos_addr->dbthres1); + writel(0x00002019, &qos_addr->dbthres2); + writel(0x00000001, &qos_addr->dblgqon); + } + + /* DBSC0 - Write */ + for (i = DBSC3_00; i < DBSC3_NR; i++) { + qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_w_qos_addr[i]; + writel(0x00000002, &qos_addr->dblgcnt); + writel(0x0000207D, &qos_addr->dbtmval0); + writel(0x00002053, &qos_addr->dbtmval1); + writel(0x00002043, &qos_addr->dbtmval2); + writel(0x00002030, &qos_addr->dbtmval3); + writel(0x00000001, &qos_addr->dbrqctr); + writel(0x00002064, &qos_addr->dbthres0); + writel(0x0000203E, &qos_addr->dbthres1); + writel(0x00002031, &qos_addr->dbthres2); + writel(0x00000001, &qos_addr->dblgqon); + } + + /* CCI-400 -QoS */ + writel(0x20000800, CCI_400_MAXOT_1); + writel(0x20000800, CCI_400_MAXOT_2); + writel(0x0000000C, CCI_400_QOSCNTL_1); + writel(0x0000000C, CCI_400_QOSCNTL_2); + + /* MXI -QoS */ + /* Transaction Control (MXI) */ + mxi = (struct rcar_mxi *)MXI_BASE; + writel(0x00000013, &mxi->mxrtcr); + writel(0x00000013, &mxi->mxwtcr); + writel(0x00780080, &mxi->mxsaar0); + writel(0x02000800, &mxi->mxsaar1); + + /* QoS Control (MXI) */ + mxi_qos = (struct rcar_mxi_qos *)MXI_QOS_BASE; + writel(0x0000000C, &mxi_qos->vspdu0); + writel(0x0000000E, &mxi_qos->du0); + + /* AXI -QoS */ + /* Transaction Control (MXI) */ + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SYX64TO128_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_AVB_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX0_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX1_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX2_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_LBS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUDS_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUM_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_RTX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB20_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB22_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_AX2M_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_CC50_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002029, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_CCI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_CS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_DDM_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_ETH_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MPXM_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_TRAB_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (RT-AXI) */ + axi_qos = (struct rcar_axi_qos *)RT_AXI_SHX_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_DBG_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_RTX64TO128_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_SY2RT_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (MP-AXI) */ + axi_qos = (struct rcar_axi_qos *)MP_AXI_ADSP_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002037, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000040, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000040, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_MLP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00001FF0, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00002001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_MMUMP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_SPU_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_SPUC_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000206E, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (SYS-AXI256) */ + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_AXI128TO256_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020EB, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_SYX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020EB, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MPX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020EB, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MXI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020EB, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (CCI-AXI) */ + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_SYX2_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUDS_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUM_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MXI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUMP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (Media-AXI) */ + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXR_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020DC, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x000020AA, &axi_qos->qosthres0); + writel(0x00002032, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXW_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020DC, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x000020AA, &axi_qos->qosthres0); + writel(0x00002032, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VIN0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00001FF0, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00002001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0R_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0W_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0R_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x00002063, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0W_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x00002063, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); +} +#else /* CONFIG_RMOBILE_EXTRAM_BOOT */ +void qos_init(void) +{ +} +#endif /* CONFIG_RMOBILE_EXTRAM_BOOT */ diff --git a/board/renesas/silk/qos.h b/board/renesas/silk/qos.h new file mode 100644 index 0000000..75a20bb --- /dev/null +++ b/board/renesas/silk/qos.h @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __QOS_H__ +#define __QOS_H__ + +void qos_init(void); + +#endif diff --git a/board/renesas/silk/silk.c b/board/renesas/silk/silk.c new file mode 100644 index 0000000..dfd9a9d --- /dev/null +++ b/board/renesas/silk/silk.c @@ -0,0 +1,163 @@ +/* + * board/renesas/silk/silk.c + * + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <malloc.h> +#include <asm/processor.h> +#include <asm/mach-types.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <asm/arch/rmobile.h> +#include <asm/arch/rcar-mstp.h> +#include <asm/arch/mmc.h> +#include <netdev.h> +#include <miiphy.h> +#include <i2c.h> +#include <div64.h> +#include "qos.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define CLK2MHZ(clk) (clk / 1000 / 1000) +void s_init(void) +{ + struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE; + struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE; + + /* Watchdog init */ + writel(0xA5A5A500, &rwdt->rwtcsra); + writel(0xA5A5A500, &swdt->swtcsra); + + /* QoS */ + qos_init(); +} + +#define TMU0_MSTP125 (1 << 25) +#define SCIF2_MSTP719 (1 << 19) +#define ETHER_MSTP813 (1 << 13) +#define IIC1_MSTP323 (1 << 23) +#define MMC0_MSTP315 (1 << 15) + +int board_early_init_f(void) +{ + /* TMU */ + mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); + + /* SCIF2 */ + mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF2_MSTP719); + + /* ETHER */ + mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813); + + /* IIC1 / sh-i2c ch1 */ + mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323); + +#ifdef CONFIG_SH_MMCIF + /* MMC */ + mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315); +#endif + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + /* Init PFC controller */ + r8a7794_pinmux_init(); + + /* Ether Enable */ + gpio_request(GPIO_FN_ETH_CRS_DV, NULL); + gpio_request(GPIO_FN_ETH_RX_ER, NULL); + gpio_request(GPIO_FN_ETH_RXD0, NULL); + gpio_request(GPIO_FN_ETH_RXD1, NULL); + gpio_request(GPIO_FN_ETH_LINK, NULL); + gpio_request(GPIO_FN_ETH_REFCLK, NULL); + gpio_request(GPIO_FN_ETH_MDIO, NULL); + gpio_request(GPIO_FN_ETH_TXD1, NULL); + gpio_request(GPIO_FN_ETH_TX_EN, NULL); + gpio_request(GPIO_FN_ETH_MAGIC, NULL); + gpio_request(GPIO_FN_ETH_TXD0, NULL); + gpio_request(GPIO_FN_ETH_MDC, NULL); + gpio_request(GPIO_FN_IRQ8, NULL); + + /* PHY reset */ + gpio_request(GPIO_GP_1_24, NULL); + gpio_direction_output(GPIO_GP_1_24, 0); + mdelay(20); + gpio_set_value(GPIO_GP_1_24, 1); + udelay(1); + + return 0; +} + +#define CXR24 0xEE7003C0 /* MAC address high register */ +#define CXR25 0xEE7003C8 /* MAC address low register */ +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_SH_ETHER + int ret = -ENODEV; + u32 val; + unsigned char enetaddr[6]; + + ret = sh_eth_initialize(bis); + if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + return ret; + + /* Set Mac address */ + val = enetaddr[0] << 24 | enetaddr[1] << 16 | + enetaddr[2] << 8 | enetaddr[3]; + writel(val, CXR24); + + val = enetaddr[4] << 8 | enetaddr[5]; + writel(val, CXR25); + + return ret; +#else + return 0; +#endif +} + +int board_mmc_init(bd_t *bis) +{ + int ret = 0; + +#ifdef CONFIG_SH_MMCIF + /* MMC0 */ + gpio_request(GPIO_GP_4_31, NULL); + gpio_set_value(GPIO_GP_4_31, 1); + + ret = mmcif_mmc_init(); +#endif + return ret; +} + +int dram_init(void) +{ + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + + return 0; +} + +const struct rmobile_sysinfo sysinfo = { + CONFIG_RMOBILE_BOARD_STRING +}; + +void reset_cpu(ulong addr) +{ + u8 val; + + i2c_set_bus_num(1); /* PowerIC connected to ch1 */ + i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); + val |= 0x02; + i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); +} diff --git a/board/samsung/goni/Kconfig b/board/samsung/goni/Kconfig index cbbf5a9..2c5d3fc 100644 --- a/board/samsung/goni/Kconfig +++ b/board/samsung/goni/Kconfig @@ -12,4 +12,13 @@ config SYS_SOC config SYS_CONFIG_NAME default "s5p_goni" +config DM + default y if !SPL_BUILD + +config DM_GPIO + default y if !SPL_BUILD + +config DM_SERIAL + default y if !SPL_BUILD + endif diff --git a/board/samsung/smdk5420/Kconfig b/board/samsung/smdk5420/Kconfig index a9d62ff..576abae 100644 --- a/board/samsung/smdk5420/Kconfig +++ b/board/samsung/smdk5420/Kconfig @@ -22,6 +22,9 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "peach-pi" +config DM_CROS_EC + default y + endif if TARGET_PEACH_PIT @@ -35,6 +38,9 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "peach-pit" +config DM_CROS_EC + default y + endif if TARGET_SMDK5420 diff --git a/board/samsung/smdkc100/Kconfig b/board/samsung/smdkc100/Kconfig index d2157b4..996fe3c 100644 --- a/board/samsung/smdkc100/Kconfig +++ b/board/samsung/smdkc100/Kconfig @@ -12,4 +12,13 @@ config SYS_SOC config SYS_CONFIG_NAME default "smdkc100" +config DM + default y if !SPL_BUILD + +config DM_GPIO + default y if !SPL_BUILD + +config DM_SERIAL + default y if !SPL_BUILD + endif diff --git a/board/silica/pengwyn/Kconfig b/board/silica/pengwyn/Kconfig index f2e1098..6ecda80 100644 --- a/board/silica/pengwyn/Kconfig +++ b/board/silica/pengwyn/Kconfig @@ -12,4 +12,13 @@ config SYS_SOC config SYS_CONFIG_NAME default "pengwyn" +config DM + default y if !SPL_BUILD + +config DM_GPIO + default y if !SPL_BUILD + +config DM_SERIAL + default y if !SPL_BUILD + endif diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig index 1ddbb2c..a20e0c1 100644 --- a/board/ti/am335x/Kconfig +++ b/board/ti/am335x/Kconfig @@ -37,4 +37,20 @@ config NOR_BOOT booted via NOR. In this case we will enable certain pinmux early as the ROM only partially sets up pinmux. We also default to using NOR for environment. + +config DM + default y if !SPL_BUILD + +config DM_GPIO + default y if DM && !SPL_BUILD + +config DM_SERIAL + default y if DM && !SPL_BUILD + +config SYS_MALLOC_F + default y if DM && !SPL_BUILD + +config SYS_MALLOC_F_LEN + default 0x400 if DM && !SPL_BUILD + endif diff --git a/common/Kconfig b/common/Kconfig index fd84fa0..2ca002d 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -153,6 +153,29 @@ endmenu menu "Device access commands" +config CMD_DM + bool "dm - Access to driver model information" + depends on DM + default y + help + Provides access to driver model data structures and information, + such as a list of devices, list of uclasses and the state of each + device (e.g. activated). This is not required for operation, but + can be useful to see the state of driver model for debugging or + interest. + +config CMD_DEMO + bool "demo - Demonstration commands for driver model" + depends on DM + help + Provides a 'demo' command which can be used to play around with + driver model. To use this properly you will need to enable one or + both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE). + Otherwise you will always get an empty list of devices. The demo + devices are defined in the sandbox device tree, so the easiest + option is to use sandbox and pass the -d point to sandbox's + u-boot.dtb file. + config CMD_LOADB bool "loadb" help diff --git a/common/board_f.c b/common/board_f.c index bdad36b..2c10215 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -1075,4 +1075,22 @@ void board_init_f_r(void) /* NOTREACHED - board_init_r() does not return */ hang(); } +#else +ulong board_init_f_mem(ulong top) +{ + /* Leave space for the stack we are running with now */ + top -= 0x40; + + top -= sizeof(struct global_data); + top = ALIGN(top, 16); + gd = (struct global_data *)top; + memset((void *)gd, '\0', sizeof(*gd)); + +#ifdef CONFIG_SYS_MALLOC_F_LEN + top -= CONFIG_SYS_MALLOC_F_LEN; + gd->malloc_base = top; +#endif + + return top; +} #endif /* CONFIG_X86 */ diff --git a/common/cmd_demo.c b/common/cmd_demo.c index bcb34d9..8a10bdf 100644 --- a/common/cmd_demo.c +++ b/common/cmd_demo.c @@ -97,7 +97,9 @@ static int do_demo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ARRAY_SIZE(demo_commands)); argc -= 2; argv += 2; - if (!demo_cmd || argc > demo_cmd->maxargs) + + if ((!demo_cmd || argc > demo_cmd->maxargs) || + ((demo_cmd->name[0] != 'l') && (argc < 1))) return CMD_RET_USAGE; if (argc) { diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 7c3ad00..fe8f77a 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1730,7 +1730,7 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const #endif if (argc == 1) { #ifdef CONFIG_DM_I2C - speed = i2c_get_bus_speed(bus); + speed = dm_i2c_get_bus_speed(bus); #else speed = i2c_get_bus_speed(); #endif @@ -1740,7 +1740,7 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const speed = simple_strtoul(argv[1], NULL, 10); printf("Setting bus speed to %d Hz\n", speed); #ifdef CONFIG_DM_I2C - ret = i2c_set_bus_speed(bus, speed); + ret = dm_i2c_set_bus_speed(bus, speed); #else ret = i2c_set_bus_speed(speed); #endif diff --git a/common/malloc_simple.c b/common/malloc_simple.c index afdacff..64ae036 100644 --- a/common/malloc_simple.c +++ b/common/malloc_simple.c @@ -19,7 +19,7 @@ void *malloc_simple(size_t bytes) new_ptr = gd->malloc_ptr + bytes; if (new_ptr > gd->malloc_limit) - panic("Out of pre-reloc memory"); + return NULL; ptr = map_sysmem(gd->malloc_base + gd->malloc_ptr, bytes); gd->malloc_ptr = ALIGN(new_ptr, sizeof(new_ptr)); return ptr; diff --git a/configs/Linksprite_pcDuino3_fdt_defconfig b/configs/Linksprite_pcDuino3_fdt_defconfig index 3b6dfa6..1e749cd 100644 --- a/configs/Linksprite_pcDuino3_fdt_defconfig +++ b/configs/Linksprite_pcDuino3_fdt_defconfig @@ -2,6 +2,8 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb" CONFIG_DM=y +CONFIG_DM_GPIO=y +CONFIG_DM_SERIAL=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3" CONFIG_OF_CONTROL=y CONFIG_OF_SEPARATE=y @@ -11,3 +13,5 @@ CONFIG_OF_SEPARATE=y +S:CONFIG_DRAM_CLK=480 +S:CONFIG_DRAM_ZQ=122 +S:CONFIG_DRAM_EMR1=4 +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/am335x_igep0033_defconfig b/configs/am335x_igep0033_defconfig index 23f0a32..f3544b5 100644 --- a/configs/am335x_igep0033_defconfig +++ b/configs/am335x_igep0033_defconfig @@ -1,3 +1,5 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_TARGET_AM335X_IGEP0033=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/am3517_crane_defconfig b/configs/am3517_crane_defconfig index cf9d8c7..33b63c7 100644 --- a/configs/am3517_crane_defconfig +++ b/configs/am3517_crane_defconfig @@ -2,3 +2,6 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_AM3517_CRANE=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index 2336f1e..7558b89 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -2,3 +2,6 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_AM3517_EVM=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/arches_defconfig b/configs/arches_defconfig index 18d0a14..30c6932 100644 --- a/configs/arches_defconfig +++ b/configs/arches_defconfig @@ -1,4 +1,7 @@ -CONFIG_SYS_EXTRA_OPTIONS="ARCHES" CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_CANYONLANDS=y +CONFIG_ARCHES=y +CONFIG_DEFAULT_DEVICE_TREE="arches" +CONFIG_OF_CONTROL=y +CONFIG_OF_SEPARATE=y diff --git a/configs/axs103_defconfig b/configs/axs103_defconfig new file mode 100644 index 0000000..c63dd4a --- /dev/null +++ b/configs/axs103_defconfig @@ -0,0 +1,5 @@ +CONFIG_SYS_TEXT_BASE=0x81000000 +CONFIG_SYS_CLK_FREQ=50000000 +CONFIG_ARC=y +CONFIG_ISA_ARCV2=y +CONFIG_TARGET_AXS101=y diff --git a/configs/canyonlands_defconfig b/configs/canyonlands_defconfig index 09b9ab9..44d4fbd 100644 --- a/configs/canyonlands_defconfig +++ b/configs/canyonlands_defconfig @@ -1,4 +1,7 @@ -CONFIG_SYS_EXTRA_OPTIONS="CANYONLANDS" CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_CANYONLANDS=y +CONFIG_CANYONLANDS=y +CONFIG_DEFAULT_DEVICE_TREE="canyonlands" +CONFIG_OF_CONTROL=y +CONFIG_OF_EMBED=y diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig index 3c0d64f..631698c 100644 --- a/configs/cm_fx6_defconfig +++ b/configs/cm_fx6_defconfig @@ -2,3 +2,8 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL" +S:CONFIG_ARM=y +S:CONFIG_TARGET_CM_FX6=y +CONFIG_DM=y +CONFIG_DM_GPIO=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/cm_t335_defconfig b/configs/cm_t335_defconfig index 5ff4f9c..5c1d3cf 100644 --- a/configs/cm_t335_defconfig +++ b/configs/cm_t335_defconfig @@ -1,3 +1,5 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_TARGET_CM_T335=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/cm_t3517_defconfig b/configs/cm_t3517_defconfig index 4000d2c..6eb37c0 100644 --- a/configs/cm_t3517_defconfig +++ b/configs/cm_t3517_defconfig @@ -2,3 +2,6 @@ CONFIG_SPL=n +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_CM_T3517=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/cm_t35_defconfig b/configs/cm_t35_defconfig index 2bb616f..84a6fb0 100644 --- a/configs/cm_t35_defconfig +++ b/configs/cm_t35_defconfig @@ -2,3 +2,6 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_CM_T35=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig index 578ae74..05a8700 100644 --- a/configs/devkit8000_defconfig +++ b/configs/devkit8000_defconfig @@ -2,3 +2,6 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_DEVKIT8000=y +CONFIG_DM=y +CONFIG_DM_SERIAL=y +CONFIG_DM_GPIO=y diff --git a/configs/dig297_defconfig b/configs/dig297_defconfig index 95bc353..0d18290 100644 --- a/configs/dig297_defconfig +++ b/configs/dig297_defconfig @@ -1,3 +1,6 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_DIG297=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/eco5pk_defconfig b/configs/eco5pk_defconfig index e45bdad..e07df8b 100644 --- a/configs/eco5pk_defconfig +++ b/configs/eco5pk_defconfig @@ -2,3 +2,6 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_ECO5PK=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/glacier_defconfig b/configs/glacier_defconfig index 2a66bfb..d318f82 100644 --- a/configs/glacier_defconfig +++ b/configs/glacier_defconfig @@ -1,4 +1,7 @@ -CONFIG_SYS_EXTRA_OPTIONS="GLACIER" CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_CANYONLANDS=y +CONFIG_GLACIER=y +CONFIG_DEFAULT_DEVICE_TREE="glacier" +CONFIG_OF_CONTROL=y +CONFIG_OF_EMBED=y diff --git a/configs/glacier_ramboot_defconfig b/configs/glacier_ramboot_defconfig new file mode 100644 index 0000000..f8363b2 --- /dev/null +++ b/configs/glacier_ramboot_defconfig @@ -0,0 +1,8 @@ +CONFIG_SYS_EXTRA_OPTIONS="SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/canyonlands/u-boot-ram.lds" +CONFIG_PPC=y +CONFIG_4xx=y +CONFIG_TARGET_CANYONLANDS=y +CONFIG_GLACIER=y +CONFIG_DEFAULT_DEVICE_TREE="glacier" +CONFIG_OF_CONTROL=y +CONFIG_OF_EMBED=y diff --git a/configs/gwventana_defconfig b/configs/gwventana_defconfig index 4cddbdd..5b1a4c4 100644 --- a/configs/gwventana_defconfig +++ b/configs/gwventana_defconfig @@ -2,3 +2,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" +S:CONFIG_ARM=y +S:CONFIG_TARGET_GW_VENTANA=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/mcx_defconfig b/configs/mcx_defconfig index c2031f8..6566d40 100644 --- a/configs/mcx_defconfig +++ b/configs/mcx_defconfig @@ -2,3 +2,6 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_MCX=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/mt_ventoux_defconfig b/configs/mt_ventoux_defconfig index a0678bb..a4747c6 100644 --- a/configs/mt_ventoux_defconfig +++ b/configs/mt_ventoux_defconfig @@ -2,3 +2,6 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_MT_VENTOUX=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/mx6dlsabreauto_defconfig b/configs/mx6dlsabreauto_defconfig index b649935..47f3f87 100644 --- a/configs/mx6dlsabreauto_defconfig +++ b/configs/mx6dlsabreauto_defconfig @@ -1,3 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL" CONFIG_ARM=y CONFIG_TARGET_MX6QSABREAUTO=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/configs/mx6dlsabresd_defconfig b/configs/mx6dlsabresd_defconfig index 7f6cdff..6adfd55 100644 --- a/configs/mx6dlsabresd_defconfig +++ b/configs/mx6dlsabresd_defconfig @@ -1,3 +1,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL" CONFIG_ARM=y CONFIG_TARGET_MX6SABRESD=y +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/configs/mx6qsabreauto_defconfig b/configs/mx6qsabreauto_defconfig index 7d86700..ab72942 100644 --- a/configs/mx6qsabreauto_defconfig +++ b/configs/mx6qsabreauto_defconfig @@ -1,3 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q" CONFIG_ARM=y CONFIG_TARGET_MX6QSABREAUTO=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig index dfa9c2e..50b75ae 100644 --- a/configs/mx6qsabrelite_defconfig +++ b/configs/mx6qsabrelite_defconfig @@ -1,3 +1,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE" CONFIG_ARM=y CONFIG_TARGET_NITROGEN6X=y +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/configs/mx6qsabresd_defconfig b/configs/mx6qsabresd_defconfig index 67c1b77..112918b 100644 --- a/configs/mx6qsabresd_defconfig +++ b/configs/mx6qsabresd_defconfig @@ -1,3 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q" CONFIG_ARM=y CONFIG_TARGET_MX6SABRESD=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/configs/mx6sabresd_spl_defconfig b/configs/mx6sabresd_spl_defconfig index 12e7844..67079ba 100644 --- a/configs/mx6sabresd_spl_defconfig +++ b/configs/mx6sabresd_spl_defconfig @@ -2,4 +2,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6Q" +S:CONFIG_ARM=y +S:CONFIG_TARGET_MX6SABRESD=y - +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig index f23d48f..72e0f10 100644 --- a/configs/mx6sxsabresd_defconfig +++ b/configs/mx6sxsabresd_defconfig @@ -1,3 +1,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX" CONFIG_ARM=y CONFIG_TARGET_MX6SXSABRESD=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig index e03f586..1bb7664 100644 --- a/configs/nokia_rx51_defconfig +++ b/configs/nokia_rx51_defconfig @@ -1,3 +1,8 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_NOKIA_RX51=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig index a3e4c2c..5a2d20b 100644 --- a/configs/omap3_beagle_defconfig +++ b/configs/omap3_beagle_defconfig @@ -3,3 +3,6 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_OMAP3_BEAGLE=y +CONFIG_DM=y +CONFIG_DM_GPIO=y +CONFIG_DM_SERIAL=y diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig index c749aa7..3bb1911 100644 --- a/configs/omap3_evm_defconfig +++ b/configs/omap3_evm_defconfig @@ -2,3 +2,6 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_OMAP3_EVM=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/omap3_evm_quick_mmc_defconfig b/configs/omap3_evm_quick_mmc_defconfig index e89bb82..4e1471b 100644 --- a/configs/omap3_evm_quick_mmc_defconfig +++ b/configs/omap3_evm_quick_mmc_defconfig @@ -2,3 +2,6 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_OMAP3_EVM_QUICK_MMC=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/omap3_evm_quick_nand_defconfig b/configs/omap3_evm_quick_nand_defconfig index e70fddd..f98672f 100644 --- a/configs/omap3_evm_quick_nand_defconfig +++ b/configs/omap3_evm_quick_nand_defconfig @@ -2,3 +2,6 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_OMAP3_EVM_QUICK_NAND=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/omap3_ha_defconfig b/configs/omap3_ha_defconfig index 50bffa9..1a8b1b4 100644 --- a/configs/omap3_ha_defconfig +++ b/configs/omap3_ha_defconfig @@ -3,3 +3,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BOARD_OMAP3_HA" +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_TAO3530=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index 5f2c063..790ccba 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -1,3 +1,6 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_LOGIC=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/omap3_mvblx_defconfig b/configs/omap3_mvblx_defconfig index fb6edc2..b75f513 100644 --- a/configs/omap3_mvblx_defconfig +++ b/configs/omap3_mvblx_defconfig @@ -1,3 +1,6 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_MVBLX=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/omap3_pandora_defconfig b/configs/omap3_pandora_defconfig index bf28537..dd0f17c 100644 --- a/configs/omap3_pandora_defconfig +++ b/configs/omap3_pandora_defconfig @@ -1,3 +1,6 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_PANDORA=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/omap3_sdp3430_defconfig b/configs/omap3_sdp3430_defconfig index 1172c2a..b3a8745 100644 --- a/configs/omap3_sdp3430_defconfig +++ b/configs/omap3_sdp3430_defconfig @@ -1,3 +1,6 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_SDP3430=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/pcm051_rev1_defconfig b/configs/pcm051_rev1_defconfig index 8b27682..baa2b23 100644 --- a/configs/pcm051_rev1_defconfig +++ b/configs/pcm051_rev1_defconfig @@ -2,3 +2,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="REV1" +S:CONFIG_ARM=y +S:CONFIG_TARGET_PCM051=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/pcm051_rev3_defconfig b/configs/pcm051_rev3_defconfig index 27ad6ff..b5c62a6 100644 --- a/configs/pcm051_rev3_defconfig +++ b/configs/pcm051_rev3_defconfig @@ -2,3 +2,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="REV3" +S:CONFIG_ARM=y +S:CONFIG_TARGET_PCM051=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/pengwyn_defconfig b/configs/pengwyn_defconfig index 1b9aa68..cbdd404 100644 --- a/configs/pengwyn_defconfig +++ b/configs/pengwyn_defconfig @@ -1,3 +1,5 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_TARGET_PENGWYN=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/pepper_defconfig b/configs/pepper_defconfig index 22c7bb4..14266ef 100644 --- a/configs/pepper_defconfig +++ b/configs/pepper_defconfig @@ -1,3 +1,5 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_TARGET_PEPPER=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index 9379cf0..98d3199 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -1,2 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_RPI=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/s5p_goni_defconfig b/configs/s5p_goni_defconfig index 618e590..33e6fb8 100644 --- a/configs/s5p_goni_defconfig +++ b/configs/s5p_goni_defconfig @@ -2,3 +2,5 @@ CONFIG_ARM=y CONFIG_ARCH_S5PC1XX=y CONFIG_TARGET_S5P_GONI=y CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni" +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index 660063e..0bf5ea3 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -5,3 +5,5 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_DM=y CONFIG_DEFAULT_DEVICE_TREE="sandbox" +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/silk_defconfig b/configs/silk_defconfig new file mode 100644 index 0000000..515ee33 --- /dev/null +++ b/configs/silk_defconfig @@ -0,0 +1,3 @@ +CONFIG_ARM=y +CONFIG_RMOBILE=y +CONFIG_TARGET_SILK=y diff --git a/configs/smdkc100_defconfig b/configs/smdkc100_defconfig index 041030f..e933a32 100644 --- a/configs/smdkc100_defconfig +++ b/configs/smdkc100_defconfig @@ -2,3 +2,5 @@ CONFIG_ARM=y CONFIG_TARGET_SMDKC100=y CONFIG_ARCH_S5PC1XX=y CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100" +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/snapper9260_defconfig b/configs/snapper9260_defconfig index 7055e2a..97c49f3 100644 --- a/configs/snapper9260_defconfig +++ b/configs/snapper9260_defconfig @@ -1,3 +1,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260" CONFIG_ARM=y CONFIG_TARGET_SNAPPER9260=y +CONFIG_DM=y +CONFIG_DM_GPIO=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/snapper9g20_defconfig b/configs/snapper9g20_defconfig index 2faae15..d5f1d9f 100644 --- a/configs/snapper9g20_defconfig +++ b/configs/snapper9g20_defconfig @@ -1,3 +1,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20" CONFIG_ARM=y CONFIG_TARGET_SNAPPER9260=y +CONFIG_DM=y +CONFIG_DM_GPIO=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/socfpga_socrates_defconfig b/configs/socfpga_socrates_defconfig index 0f3896d..888bbb6 100644 --- a/configs/socfpga_socrates_defconfig +++ b/configs/socfpga_socrates_defconfig @@ -3,3 +3,6 @@ CONFIG_SPL=y +S:CONFIG_TARGET_SOCFPGA_CYCLONE5=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates" +CONFIG_DM=y +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y diff --git a/configs/stv0991_defconfig b/configs/stv0991_defconfig index a05e991..1c9ba88 100644 --- a/configs/stv0991_defconfig +++ b/configs/stv0991_defconfig @@ -1,3 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="stv0991" CONFIG_ARM=y CONFIG_TARGET_STV0991=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_DM=y +CONFIG_DM_SERIAL=y diff --git a/configs/tao3530_defconfig b/configs/tao3530_defconfig index a511389..39ed872 100644 --- a/configs/tao3530_defconfig +++ b/configs/tao3530_defconfig @@ -2,3 +2,6 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_TAO3530=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/tricorder_defconfig b/configs/tricorder_defconfig index 7ea5e02..3efe829 100644 --- a/configs/tricorder_defconfig +++ b/configs/tricorder_defconfig @@ -2,3 +2,6 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_TRICORDER=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/tricorder_flash_defconfig b/configs/tricorder_flash_defconfig index f6e1c46..8f999ff 100644 --- a/configs/tricorder_flash_defconfig +++ b/configs/tricorder_flash_defconfig @@ -3,3 +3,6 @@ CONFIG_SYS_EXTRA_OPTIONS="FLASHCARD" +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_TRICORDER=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/configs/twister_defconfig b/configs/twister_defconfig index 9023736..d21a551 100644 --- a/configs/twister_defconfig +++ b/configs/twister_defconfig @@ -2,3 +2,6 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_OMAP34XX=y +S:CONFIG_TARGET_TWISTER=y +CONFIG_DM=n +CONFIG_DM_SERIAL=n +CONFIG_DM_GPIO=n diff --git a/doc/driver-model/spi-howto.txt b/doc/driver-model/spi-howto.txt index 5bc29ad..ee4abf4 100644 --- a/doc/driver-model/spi-howto.txt +++ b/doc/driver-model/spi-howto.txt @@ -40,8 +40,8 @@ with only minor changes: Add these to your board config: -#define CONFIG_DM_SPI -#define CONFIG_DM_SPI_FLASH +CONFIG_DM_SPI +CONFIG_DM_SPI_FLASH 2. Add the skeleton diff --git a/drivers/Kconfig b/drivers/Kconfig index 128736d..dcce532 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -2,6 +2,8 @@ menu "Device Drivers" source "drivers/core/Kconfig" +source "drivers/demo/Kconfig" + source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" @@ -48,4 +50,6 @@ source "drivers/dma/Kconfig" source "drivers/crypto/Kconfig" +source "drivers/thermal/Kconfig" + endmenu diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index d2799dc..f0d6110 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -2,5 +2,51 @@ config DM bool "Enable Driver Model" depends on !SPL_BUILD help - This config option enables Driver Model. - To use legacy drivers, say N. + This config option enables Driver Model. This brings in the core + support, including scanning of platform data on start-up. If + CONFIG_OF_CONTROL is enabled, the device tree will be scanned also + when available. + +config SPL_DM + bool "Enable Driver Model for SPL" + depends on DM && SPL + help + Enable driver model in SPL. You will need to provide a + suitable malloc() implementation. If you are not using the + full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START, + consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you + must provide CONFIG_SYS_MALLOC_F_LEN to set the size. + In most cases driver model will only allocate a few uclasses + and devices in SPL, so 1KB should be enable. See + CONFIG_SYS_MALLOC_F_LEN for more details on how to enable it. + +config DM_WARN + bool "Enable warnings in driver model" + help + The dm_warn() function can use up quite a bit of space for its + strings. By default this is disabled for SPL builds to save space. + This will cause dm_warn() to be compiled out - it will do nothing + when called. + depends on DM + default y if !SPL_BUILD + default n if SPL_BUILD + +config DM_DEVICE_REMOVE + bool "Support device removal" + help + We can save some code space by dropping support for removing a + device. This is not normally required in SPL, so by default this + option is disabled for SPL. + depends on DM + default y if !SPL_BUILD + default n if SPL_BUILD + +config DM_STDIO + bool "Support stdio registration" + help + Normally serial drivers register with stdio so that they can be used + as normal output devices. In SPL we don't normally use stdio, so + we can omit this feature. + depends on DM + default y if !SPL_BUILD + default n if SPL_BUILD diff --git a/drivers/core/device.c b/drivers/core/device.c index b73d3b8..73c3e07 100644 --- a/drivers/core/device.c +++ b/drivers/core/device.c @@ -449,3 +449,15 @@ enum uclass_id device_get_uclass_id(struct udevice *dev) { return dev->uclass->uc_drv->id; } + +#ifdef CONFIG_OF_CONTROL +fdt_addr_t dev_get_addr(struct udevice *dev) +{ + return fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); +} +#else +fdt_addr_t dev_get_addr(struct udevice *dev) +{ + return FDT_ADDR_T_NONE; +} +#endif diff --git a/drivers/core/root.c b/drivers/core/root.c index 73e3c72..9b5c6bb 100644 --- a/drivers/core/root.c +++ b/drivers/core/root.c @@ -37,6 +37,65 @@ struct udevice *dm_root(void) return gd->dm_root; } +#if defined(CONFIG_NEEDS_MANUAL_RELOC) +void fix_drivers(void) +{ + struct driver *drv = + ll_entry_start(struct driver, driver); + const int n_ents = ll_entry_count(struct driver, driver); + struct driver *entry; + + for (entry = drv; entry != drv + n_ents; entry++) { + if (entry->of_match) + entry->of_match = (const struct udevice_id *) + ((u32)entry->of_match + gd->reloc_off); + if (entry->bind) + entry->bind += gd->reloc_off; + if (entry->probe) + entry->probe += gd->reloc_off; + if (entry->remove) + entry->remove += gd->reloc_off; + if (entry->unbind) + entry->unbind += gd->reloc_off; + if (entry->ofdata_to_platdata) + entry->ofdata_to_platdata += gd->reloc_off; + if (entry->child_pre_probe) + entry->child_pre_probe += gd->reloc_off; + if (entry->child_post_remove) + entry->child_post_remove += gd->reloc_off; + /* OPS are fixed in every uclass post_probe function */ + if (entry->ops) + entry->ops += gd->reloc_off; + } +} + +void fix_uclass(void) +{ + struct uclass_driver *uclass = + ll_entry_start(struct uclass_driver, uclass); + const int n_ents = ll_entry_count(struct uclass_driver, uclass); + struct uclass_driver *entry; + + for (entry = uclass; entry != uclass + n_ents; entry++) { + if (entry->post_bind) + entry->post_bind += gd->reloc_off; + if (entry->pre_unbind) + entry->pre_unbind += gd->reloc_off; + if (entry->post_probe) + entry->post_probe += gd->reloc_off; + if (entry->pre_remove) + entry->pre_remove += gd->reloc_off; + if (entry->init) + entry->init += gd->reloc_off; + if (entry->destroy) + entry->destroy += gd->reloc_off; + /* FIXME maybe also need to fix these ops */ + if (entry->ops) + entry->ops += gd->reloc_off; + } +} +#endif + int dm_init(void) { int ret; @@ -47,6 +106,11 @@ int dm_init(void) } INIT_LIST_HEAD(&DM_UCLASS_ROOT_NON_CONST); +#if defined(CONFIG_NEEDS_MANUAL_RELOC) + fix_drivers(); + fix_uclass(); +#endif + ret = device_bind_by_name(NULL, false, &root_info, &DM_ROOT_NON_CONST); if (ret) return ret; diff --git a/drivers/demo/Kconfig b/drivers/demo/Kconfig new file mode 100644 index 0000000..7a8ce18 --- /dev/null +++ b/drivers/demo/Kconfig @@ -0,0 +1,26 @@ +config DM_DEMO + bool "Enable demo uclass support" + depends on DM + help + This uclass allows you to play around with driver model. It provides + an interface to a couple of demo devices. You can access it using + the 'demo' command or by calling the uclass functions from your + own code. + +config DM_DEMO_SIMPLE + bool "Enable simple demo device for driver model" + depends on DM_DEMO + help + This device allows you to play around with driver model. It prints + a message when the 'demo hello' command is executed which targets + this device. It can be used to help understand how driver model + works. + +config DM_DEMO_SHAPE + bool "Enable shape demo device for driver model" + depends on DM_DEMO + help + This device allows you to play around with driver model. It prints + a shape when the 'demo hello' command is executed which targets + this device. It can be used to help understand how driver model + works. diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index d21302f..b609e73 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -2,5 +2,8 @@ config DM_GPIO bool "Enable Driver Model for GPIO drivers" depends on DM help - If you want to use driver model for GPIO drivers, say Y. - To use legacy GPIO drivers, say N. + Enable driver model for GPIO access. The standard GPIO + interface (gpio_get_value(), etc.) is then implemented by + the GPIO uclass. Drivers provide methods to query the + particular GPIOs that they provide. The uclass interface + is defined in include/asm-generic/gpio.h. diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c index 6129c02..22fbd63 100644 --- a/drivers/gpio/at91_gpio.c +++ b/drivers/gpio/at91_gpio.c @@ -451,7 +451,7 @@ struct at91_port_priv { /* set GPIO pin 'gpio' as an input */ static int at91_gpio_direction_input(struct udevice *dev, unsigned offset) { - struct at91_port_priv *port = dev_get_platdata(dev); + struct at91_port_priv *port = dev_get_priv(dev); at91_set_port_input(port->regs, offset, 0); @@ -462,7 +462,7 @@ static int at91_gpio_direction_input(struct udevice *dev, unsigned offset) static int at91_gpio_direction_output(struct udevice *dev, unsigned offset, int value) { - struct at91_port_priv *port = dev_get_platdata(dev); + struct at91_port_priv *port = dev_get_priv(dev); at91_set_port_output(port->regs, offset, value); @@ -472,7 +472,7 @@ static int at91_gpio_direction_output(struct udevice *dev, unsigned offset, /* read GPIO IN value of pin 'gpio' */ static int at91_gpio_get_value(struct udevice *dev, unsigned offset) { - struct at91_port_priv *port = dev_get_platdata(dev); + struct at91_port_priv *port = dev_get_priv(dev); return at91_get_port_value(port->regs, offset); } @@ -481,7 +481,7 @@ static int at91_gpio_get_value(struct udevice *dev, unsigned offset) static int at91_gpio_set_value(struct udevice *dev, unsigned offset, int value) { - struct at91_port_priv *port = dev_get_platdata(dev); + struct at91_port_priv *port = dev_get_priv(dev); at91_set_port_value(port->regs, offset, value); @@ -490,7 +490,7 @@ static int at91_gpio_set_value(struct udevice *dev, unsigned offset, static int at91_gpio_get_function(struct udevice *dev, unsigned offset) { - struct at91_port_priv *port = dev_get_platdata(dev); + struct at91_port_priv *port = dev_get_priv(dev); /* GPIOF_FUNC is not implemented yet */ if (at91_get_port_output(port->regs, offset)) diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index 8bb9e39..815407b 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -23,6 +23,7 @@ enum mxc_gpio_direction { #define GPIO_PER_BANK 32 struct mxc_gpio_plat { + int bank_index; struct gpio_regs *regs; }; @@ -150,6 +151,9 @@ int gpio_direction_output(unsigned gpio, int value) #endif #ifdef CONFIG_DM_GPIO +#include <fdtdec.h> +DECLARE_GLOBAL_DATA_PTR; + static int mxc_gpio_is_output(struct gpio_regs *regs, int offset) { u32 val; @@ -258,23 +262,6 @@ static const struct dm_gpio_ops gpio_mxc_ops = { .get_function = mxc_gpio_get_function, }; -static const struct mxc_gpio_plat mxc_plat[] = { - { (struct gpio_regs *)GPIO1_BASE_ADDR }, - { (struct gpio_regs *)GPIO2_BASE_ADDR }, - { (struct gpio_regs *)GPIO3_BASE_ADDR }, -#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ - defined(CONFIG_MX53) || defined(CONFIG_MX6) - { (struct gpio_regs *)GPIO4_BASE_ADDR }, -#endif -#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) - { (struct gpio_regs *)GPIO5_BASE_ADDR }, - { (struct gpio_regs *)GPIO6_BASE_ADDR }, -#endif -#if defined(CONFIG_MX53) || defined(CONFIG_MX6) - { (struct gpio_regs *)GPIO7_BASE_ADDR }, -#endif -}; - static int mxc_gpio_probe(struct udevice *dev) { struct mxc_bank_info *bank = dev_get_priv(dev); @@ -283,7 +270,7 @@ static int mxc_gpio_probe(struct udevice *dev) int banknum; char name[18], *str; - banknum = plat - mxc_plat; + banknum = plat->bank_index; sprintf(name, "GPIO%d_", banknum + 1); str = strdup(name); if (!str) @@ -295,12 +282,72 @@ static int mxc_gpio_probe(struct udevice *dev) return 0; } +static int mxc_gpio_bind(struct udevice *dev) +{ + struct mxc_gpio_plat *plat = dev->platdata; + fdt_addr_t addr; + + /* + * If platdata already exsits, directly return. + * Actually only when DT is not supported, platdata + * is statically initialized in U_BOOT_DEVICES.Here + * will return. + */ + if (plat) + return 0; + + addr = dev_get_addr(dev); + if (addr == FDT_ADDR_T_NONE) + return -ENODEV; + + /* + * TODO: + * When every board is converted to driver model and DT is supported, + * this can be done by auto-alloc feature, but not using calloc + * to alloc memory for platdata. + */ + plat = calloc(1, sizeof(*plat)); + if (!plat) + return -ENOMEM; + + plat->regs = (struct gpio_regs *)addr; + plat->bank_index = dev->req_seq; + dev->platdata = plat; + + return 0; +} + +static const struct udevice_id mxc_gpio_ids[] = { + { .compatible = "fsl,imx35-gpio" }, + { } +}; + U_BOOT_DRIVER(gpio_mxc) = { .name = "gpio_mxc", .id = UCLASS_GPIO, .ops = &gpio_mxc_ops, .probe = mxc_gpio_probe, .priv_auto_alloc_size = sizeof(struct mxc_bank_info), + .of_match = mxc_gpio_ids, + .bind = mxc_gpio_bind, +}; + +#ifndef CONFIG_OF_CONTROL +static const struct mxc_gpio_plat mxc_plat[] = { + { 0, (struct gpio_regs *)GPIO1_BASE_ADDR }, + { 1, (struct gpio_regs *)GPIO2_BASE_ADDR }, + { 2, (struct gpio_regs *)GPIO3_BASE_ADDR }, +#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ + defined(CONFIG_MX53) || defined(CONFIG_MX6) + { 3, (struct gpio_regs *)GPIO4_BASE_ADDR }, +#endif +#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) + { 4, (struct gpio_regs *)GPIO5_BASE_ADDR }, + { 5, (struct gpio_regs *)GPIO6_BASE_ADDR }, +#endif +#if defined(CONFIG_MX53) || defined(CONFIG_MX6) + { 6, (struct gpio_regs *)GPIO7_BASE_ADDR }, +#endif }; U_BOOT_DEVICES(mxc_gpios) = { @@ -320,3 +367,4 @@ U_BOOT_DEVICES(mxc_gpios) = { #endif }; #endif +#endif diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c index f3a7ccb..19fc451 100644 --- a/drivers/gpio/omap_gpio.c +++ b/drivers/gpio/omap_gpio.c @@ -291,7 +291,7 @@ static int omap_gpio_get_function(struct udevice *dev, unsigned offset) struct gpio_bank *bank = dev_get_priv(dev); /* GPIOF_FUNC is not implemented yet */ - if (_get_gpio_direction(bank->base, offset) == OMAP_GPIO_DIR_OUT) + if (_get_gpio_direction(bank, offset) == OMAP_GPIO_DIR_OUT) return GPIOF_OUTPUT; else return GPIOF_INPUT; diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 202ea5d..2cc776c 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -2,8 +2,16 @@ config DM_I2C bool "Enable Driver Model for I2C drivers" depends on DM help - If you want to use driver model for I2C drivers, say Y. - To use legacy I2C drivers, say N. + Enable driver model for I2C. This SPI flash interface + (spi_flash_probe(), spi_flash_write(), etc.) is then + implemented by the SPI flash uclass. There is one standard + SPI flash driver which knows how to probe most chips + supported by U-Boot. The uclass interface is defined in + include/spi_flash.h, but is currently fully compatible + with the old interface to avoid confusion and duplication + during the transition parent. SPI and SPI flash must be + enabled together (it is not possible to use driver model + for one and not the other). config SYS_I2C_UNIPHIER bool "UniPhier I2C driver" diff --git a/drivers/i2c/adi_i2c.c b/drivers/i2c/adi_i2c.c index 20495b1..c58f14a 100644 --- a/drivers/i2c/adi_i2c.c +++ b/drivers/i2c/adi_i2c.c @@ -63,7 +63,7 @@ struct twi_regs { #endif /* All transfers are described by this data structure */ -struct i2c_msg { +struct adi_i2c_msg { u8 flags; #define I2C_M_COMBO 0x4 #define I2C_M_STOP 0x2 @@ -81,7 +81,7 @@ struct i2c_msg { * wait_for_completion - manage the actual i2c transfer * @msg: the i2c msg */ -static int wait_for_completion(struct twi_regs *twi, struct i2c_msg *msg) +static int wait_for_completion(struct twi_regs *twi, struct adi_i2c_msg *msg) { u16 int_stat, ctl; ulong timebase = get_timer(0); @@ -151,7 +151,7 @@ static int i2c_transfer(struct i2c_adapter *adap, uint8_t chip, uint addr, (addr >> 8), (addr >> 16), }; - struct i2c_msg msg = { + struct adi_i2c_msg msg = { .flags = flags | (len >= 0xff ? I2C_M_STOP : 0), .buf = buffer, .len = len, diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c index eafa457..a6991bf 100644 --- a/drivers/i2c/i2c-uclass.c +++ b/drivers/i2c/i2c-uclass.c @@ -325,7 +325,7 @@ int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags, return ret; } -int i2c_set_bus_speed(struct udevice *bus, unsigned int speed) +int dm_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) { struct dm_i2c_ops *ops = i2c_get_ops(bus); struct dm_i2c_bus *i2c = bus->uclass_priv; @@ -346,12 +346,7 @@ int i2c_set_bus_speed(struct udevice *bus, unsigned int speed) return 0; } -/* - * i2c_get_bus_speed: - * - * Returns speed of selected I2C bus in Hz - */ -int i2c_get_bus_speed(struct udevice *bus) +int dm_i2c_get_bus_speed(struct udevice *bus) { struct dm_i2c_ops *ops = i2c_get_ops(bus); struct dm_i2c_bus *i2c = bus->uclass_priv; @@ -440,7 +435,7 @@ static int i2c_post_probe(struct udevice *dev) i2c->speed_hz = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "clock-frequency", 100000); - return i2c_set_bus_speed(dev, i2c->speed_hz); + return dm_i2c_set_bus_speed(dev, i2c->speed_hz); } static int i2c_post_bind(struct udevice *dev) diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c index 5eab338..9af496b 100644 --- a/drivers/i2c/kona_i2c.c +++ b/drivers/i2c/kona_i2c.c @@ -156,7 +156,7 @@ static struct bcm_kona_i2c_dev g_i2c_devs[CONFIG_SYS_MAX_I2C_BUS] = { #define I2C_M_RD 0x0001 /* read data */ #define I2C_M_NOSTART 0x4000 /* no restart between msgs */ -struct i2c_msg { +struct kona_i2c_msg { uint16_t addr; uint16_t flags; uint16_t len; @@ -297,7 +297,7 @@ static int bcm_kona_i2c_read_fifo_single(struct bcm_kona_i2c_dev *dev, /* Read any amount of data using the RX FIFO from the i2c bus */ static int bcm_kona_i2c_read_fifo(struct bcm_kona_i2c_dev *dev, - struct i2c_msg *msg) + struct kona_i2c_msg *msg) { unsigned int bytes_to_read = MAX_RX_FIFO_SIZE; unsigned int last_byte_nak = 0; @@ -392,7 +392,7 @@ static int bcm_kona_i2c_write_fifo_single(struct bcm_kona_i2c_dev *dev, /* Write any amount of data using TX FIFO to the i2c bus */ static int bcm_kona_i2c_write_fifo(struct bcm_kona_i2c_dev *dev, - struct i2c_msg *msg) + struct kona_i2c_msg *msg) { unsigned int bytes_to_write = MAX_TX_FIFO_SIZE; unsigned int bytes_written = 0; @@ -418,7 +418,7 @@ static int bcm_kona_i2c_write_fifo(struct bcm_kona_i2c_dev *dev, /* Send i2c address */ static int bcm_kona_i2c_do_addr(struct bcm_kona_i2c_dev *dev, - struct i2c_msg *msg) + struct kona_i2c_msg *msg) { unsigned char addr; @@ -480,9 +480,9 @@ static void bcm_kona_i2c_config_timing(struct bcm_kona_i2c_dev *dev) /* Master transfer function */ static int bcm_kona_i2c_xfer(struct bcm_kona_i2c_dev *dev, - struct i2c_msg msgs[], int num) + struct kona_i2c_msg msgs[], int num) { - struct i2c_msg *pmsg; + struct kona_i2c_msg *pmsg; int rc = 0; int i; @@ -635,7 +635,7 @@ static int kona_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, int alen, uchar *buffer, int len) { /* msg[0] writes the addr, msg[1] reads the data */ - struct i2c_msg msg[2]; + struct kona_i2c_msg msg[2]; unsigned char msgbuf0[64]; struct bcm_kona_i2c_dev *dev = kona_get_dev(adap); @@ -663,7 +663,7 @@ static int kona_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, static int kona_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, int alen, uchar *buffer, int len) { - struct i2c_msg msg[1]; + struct kona_i2c_msg msg[1]; unsigned char msgbuf0[64]; unsigned int i; struct bcm_kona_i2c_dev *dev = kona_get_dev(adap); diff --git a/drivers/i2c/mv_i2c.c b/drivers/i2c/mv_i2c.c index dac3463..e65cce0 100644 --- a/drivers/i2c/mv_i2c.c +++ b/drivers/i2c/mv_i2c.c @@ -31,7 +31,7 @@ #endif /* All transfers are described by this data structure */ -struct i2c_msg { +struct mv_i2c_msg { u8 condition; u8 acknack; u8 direction; @@ -157,7 +157,7 @@ static int i2c_isr_set_cleared(unsigned long set_mask, * -5: illegal parameters * -6: bus is busy and couldn't be aquired */ -int i2c_transfer(struct i2c_msg *msg) +int i2c_transfer(struct mv_i2c_msg *msg) { int ret; @@ -286,7 +286,7 @@ void i2c_init(int speed, int slaveaddr) */ int i2c_probe(uchar chip) { - struct i2c_msg msg; + struct mv_i2c_msg msg; i2c_reset(); @@ -322,7 +322,7 @@ int i2c_probe(uchar chip) */ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) { - struct i2c_msg msg; + struct mv_i2c_msg msg; u8 addr_bytes[3]; /* lowest...highest byte of data address */ PRINTD(("i2c_read(chip=0x%02x, addr=0x%02x, alen=0x%02x, " @@ -410,7 +410,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) */ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) { - struct i2c_msg msg; + struct mv_i2c_msg msg; u8 addr_bytes[3]; /* lowest...highest byte of data address */ PRINTD(("i2c_write(chip=0x%02x, addr=0x%02x, alen=0x%02x, " diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index 0dd1abc..b4ee33f 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -112,9 +112,9 @@ #define I2C_START_STOP 0x20 /* START / STOP */ #define I2C_TXRX_ENA 0x10 /* I2C Tx/Rx enable */ -#define I2C_TIMEOUT_MS 1000 /* 1 second */ +#define I2C_TIMEOUT_MS 10 /* 10 ms */ -#define HSI2C_TIMEOUT_US 100000 /* 100 ms, finer granularity */ +#define HSI2C_TIMEOUT_US 10000 /* 10 ms, finer granularity */ /* To support VCMA9 boards and other who dont define max_i2c_num */ diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index e69de29..813d1c2 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -0,0 +1,9 @@ +config DM_CROS_EC + bool "Enable Driver Model for Chrome OS EC" + depends on DM + help + Enable driver model for the Chrome OS EC interface. This + allows the cros_ec SPI driver to operate with CONFIG_DM_SPI + but otherwise makes few changes. Since cros_ec also supports + I2C and LPC (which don't support driver model yet), a full + conversion is not yet possible. diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 415ab4e..59278d1 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -1 +1,3 @@ source "drivers/mtd/nand/Kconfig" + +source "drivers/mtd/spi/Kconfig" diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig new file mode 100644 index 0000000..2dc46b4 --- /dev/null +++ b/drivers/mtd/spi/Kconfig @@ -0,0 +1,14 @@ +config DM_SPI_FLASH + bool "Enable Driver Model for SPI flash" + depends on DM && SPI + help + Enable driver model for SPI flash. This SPI flash interface + (spi_flash_probe(), spi_flash_write(), etc.) is then + implemented by the SPI flash uclass. There is one standard + SPI flash driver which knows how to probe most chips + supported by U-Boot. The uclass interface is defined in + include/spi_flash.h, but is currently fully compatible + with the old interface to avoid confusion and duplication + during the transition parent. SPI and SPI flash must be + enabled together (it is not possible to use driver model + for one and not the other). diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index a0b6e02..c94353b 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -2,8 +2,10 @@ config DM_SERIAL bool "Enable Driver Model for serial drivers" depends on DM help - If you want to use driver model for serial drivers, say Y. - To use legacy serial drivers, say N. + Enable driver model for serial. This replaces + drivers/serial/serial.c with the serial uclass, which + implements serial_putc() etc. The uclass interface is + defined in include/serial.h. config UNIPHIER_SERIAL bool "UniPhier on-chip UART support" diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 4cc00cd..63b0cbf 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -8,6 +8,7 @@ ifdef CONFIG_DM_SERIAL obj-y += serial-uclass.o obj-$(CONFIG_PL01X_SERIAL) += serial_pl01x.o +obj-$(CONFIG_PPC) += serial_ppc.o else obj-y += serial.o obj-$(CONFIG_PL010_SERIAL) += serial_pl01x.o diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index 9131a8f..3fc7104 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -258,6 +258,22 @@ static int serial_post_probe(struct udevice *dev) #endif int ret; +#if defined(CONFIG_NEEDS_MANUAL_RELOC) + if (ops->setbrg) + ops->setbrg += gd->reloc_off; + if (ops->getc) + ops->getc += gd->reloc_off; + if (ops->putc) + ops->putc += gd->reloc_off; + if (ops->pending) + ops->pending += gd->reloc_off; + if (ops->clear) + ops->clear += gd->reloc_off; +#if CONFIG_POST & CONFIG_SYS_POST_UART + if (ops->loop) + ops->loop += gd->reloc_off +#endif +#endif /* Set the baud rate */ if (ops->setbrg) { ret = ops->setbrg(dev, gd->baudrate); diff --git a/drivers/serial/serial_ppc.c b/drivers/serial/serial_ppc.c new file mode 100644 index 0000000..47141c6 --- /dev/null +++ b/drivers/serial/serial_ppc.c @@ -0,0 +1,40 @@ +/* + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <ns16550.h> +#include <serial.h> + +static const struct udevice_id ppc_serial_ids[] = { + { .compatible = "ns16550" }, + { } +}; + +static int ppc_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct ns16550_platdata *plat = dev_get_platdata(dev); + int ret; + + ret = ns16550_serial_ofdata_to_platdata(dev); + if (ret) + return ret; + plat->clock = get_serial_clock(); + + return 0; +} + +U_BOOT_DRIVER(serial_ns16550) = { + .name = "serial_ppc", + .id = UCLASS_SERIAL, + .of_match = ppc_serial_ids, + .ofdata_to_platdata = ppc_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), + .priv_auto_alloc_size = sizeof(struct NS16550), + .probe = ns16550_serial_probe, + .ops = &ns16550_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 7c1f271..3641c9f 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -1,78 +1,21 @@ /* * SuperH SCIF device driver. * Copyright (C) 2013 Renesas Electronics Corporation - * Copyright (C) 2007,2008,2010 Nobuhiro Iwamatsu + * Copyright (C) 2007,2008,2010, 2014 Nobuhiro Iwamatsu * Copyright (C) 2002 - 2008 Paul Mundt * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <errno.h> +#include <dm.h> #include <asm/io.h> #include <asm/processor.h> -#include "serial_sh.h" #include <serial.h> #include <linux/compiler.h> - -#if defined(CONFIG_CONS_SCIF0) -# define SCIF_BASE SCIF0_BASE -#elif defined(CONFIG_CONS_SCIF1) -# define SCIF_BASE SCIF1_BASE -#elif defined(CONFIG_CONS_SCIF2) -# define SCIF_BASE SCIF2_BASE -#elif defined(CONFIG_CONS_SCIF3) -# define SCIF_BASE SCIF3_BASE -#elif defined(CONFIG_CONS_SCIF4) -# define SCIF_BASE SCIF4_BASE -#elif defined(CONFIG_CONS_SCIF5) -# define SCIF_BASE SCIF5_BASE -#elif defined(CONFIG_CONS_SCIF6) -# define SCIF_BASE SCIF6_BASE -#elif defined(CONFIG_CONS_SCIF7) -# define SCIF_BASE SCIF7_BASE -#else -# error "Default SCIF doesn't set....." -#endif - -#if defined(CONFIG_SCIF_A) - #define SCIF_BASE_PORT PORT_SCIFA -#else - #define SCIF_BASE_PORT PORT_SCIF -#endif - -static struct uart_port sh_sci = { - .membase = (unsigned char*)SCIF_BASE, - .mapbase = SCIF_BASE, - .type = SCIF_BASE_PORT, -}; - -static void sh_serial_setbrg(void) -{ - DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_SCIF_USE_EXT_CLK - unsigned short dl = DL_VALUE(gd->baudrate, CONFIG_SH_SCIF_CLK_FREQ); - sci_out(&sh_sci, DL, dl); - /* Need wait: Clock * 1/dl $B!_(B 1/16 */ - udelay((1000000 * dl * 16 / CONFIG_SYS_CLK_FREQ) * 1000 + 1); -#else - sci_out(&sh_sci, SCBRR, - SCBRR_VALUE(gd->baudrate, CONFIG_SH_SCIF_CLK_FREQ)); -#endif -} - -static int sh_serial_init(void) -{ - sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci)); - sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci)); - sci_out(&sh_sci, SCSMR, 0); - sci_out(&sh_sci, SCSMR, 0); - sci_out(&sh_sci, SCFCR, SCFCR_RFRST|SCFCR_TFRST); - sci_in(&sh_sci, SCFCR); - sci_out(&sh_sci, SCFCR, 0); - - serial_setbrg(); - return 0; -} +#include <dm/platform_data/serial_sh.h> +#include "serial_sh.h" #if defined(CONFIG_CPU_SH7760) || \ defined(CONFIG_CPU_SH7780) || \ @@ -86,7 +29,7 @@ static int scif_rxfill(struct uart_port *port) static int scif_rxfill(struct uart_port *port) { if ((port->mapbase == 0xffe00000) || - (port->mapbase == 0xffe08000)) { + (port->mapbase == 0xffe08000)) { /* SCIF0/1*/ return sci_in(port, SCRFDR) & 0xff; } else { @@ -109,80 +52,253 @@ static int scif_rxfill(struct uart_port *port) } #endif -static int serial_rx_fifo_level(void) +static void sh_serial_init_generic(struct uart_port *port) { - return scif_rxfill(&sh_sci); + sci_out(port, SCSCR , SCSCR_INIT(port)); + sci_out(port, SCSCR , SCSCR_INIT(port)); + sci_out(port, SCSMR, 0); + sci_out(port, SCSMR, 0); + sci_out(port, SCFCR, SCFCR_RFRST|SCFCR_TFRST); + sci_in(port, SCFCR); + sci_out(port, SCFCR, 0); } -static void handle_error(void) +static void +sh_serial_setbrg_generic(struct uart_port *port, int clk, int baudrate) { - sci_in(&sh_sci, SCxSR); - sci_out(&sh_sci, SCxSR, SCxSR_ERROR_CLEAR(&sh_sci)); - sci_in(&sh_sci, SCLSR); - sci_out(&sh_sci, SCLSR, 0x00); + if (port->clk_mode == EXT_CLK) { + unsigned short dl = DL_VALUE(baudrate, clk); + sci_out(port, DL, dl); + /* Need wait: Clock * 1/dl $B!_(B 1/16 */ + udelay((1000000 * dl * 16 / clk) * 1000 + 1); + } else { + sci_out(port, SCBRR, SCBRR_VALUE(baudrate, clk)); + } } -static void serial_raw_putc(const char c) +static void handle_error(struct uart_port *port) { - while (1) { - /* Tx fifo is empty */ - if (sci_in(&sh_sci, SCxSR) & SCxSR_TEND(&sh_sci)) - break; - } + sci_in(port, SCxSR); + sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); + sci_in(port, SCLSR); + sci_out(port, SCLSR, 0x00); +} + +static int serial_raw_putc(struct uart_port *port, const char c) +{ + /* Tx fifo is empty */ + if (!(sci_in(port, SCxSR) & SCxSR_TEND(port))) + return -EAGAIN; - sci_out(&sh_sci, SCxTDR, c); - sci_out(&sh_sci, SCxSR, sci_in(&sh_sci, SCxSR) & ~SCxSR_TEND(&sh_sci)); + sci_out(port, SCxTDR, c); + sci_out(port, SCxSR, sci_in(port, SCxSR) & ~SCxSR_TEND(port)); + + return 0; } -static void sh_serial_putc(const char c) +static int serial_rx_fifo_level(struct uart_port *port) { - if (c == '\n') - serial_raw_putc('\r'); - serial_raw_putc(c); + return scif_rxfill(port); } -static int sh_serial_tstc(void) +static int sh_serial_tstc_generic(struct uart_port *port) { - if (sci_in(&sh_sci, SCxSR) & SCIF_ERRORS) { - handle_error(); + if (sci_in(port, SCxSR) & SCIF_ERRORS) { + handle_error(port); return 0; } - return serial_rx_fifo_level() ? 1 : 0; + return serial_rx_fifo_level(port) ? 1 : 0; } - -static int serial_getc_check(void) +static int serial_getc_check(struct uart_port *port) { unsigned short status; - status = sci_in(&sh_sci, SCxSR); + status = sci_in(port, SCxSR); if (status & SCIF_ERRORS) - handle_error(); - if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci)) - handle_error(); - return status & (SCIF_DR | SCxSR_RDxF(&sh_sci)); + handle_error(port); + if (sci_in(port, SCLSR) & SCxSR_ORER(port)) + handle_error(port); + return status & (SCIF_DR | SCxSR_RDxF(port)); } -static int sh_serial_getc(void) +static int sh_serial_getc_generic(struct uart_port *port) { unsigned short status; char ch; - while (!serial_getc_check()) - ; + if (!serial_getc_check(port)) + return -EAGAIN; - ch = sci_in(&sh_sci, SCxRDR); - status = sci_in(&sh_sci, SCxSR); + ch = sci_in(port, SCxRDR); + status = sci_in(port, SCxSR); - sci_out(&sh_sci, SCxSR, SCxSR_RDxF_CLEAR(&sh_sci)); + sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); if (status & SCIF_ERRORS) - handle_error(); + handle_error(port); + + if (sci_in(port, SCLSR) & SCxSR_ORER(port)) + handle_error(port); + + return ch; +} + +#ifdef CONFIG_DM_SERIAL + +static int sh_serial_pending(struct udevice *dev, bool input) +{ + struct uart_port *priv = dev_get_priv(dev); + + return sh_serial_tstc_generic(priv); +} + +static int sh_serial_putc(struct udevice *dev, const char ch) +{ + struct uart_port *priv = dev_get_priv(dev); + + return serial_raw_putc(priv, ch); +} + +static int sh_serial_getc(struct udevice *dev) +{ + struct uart_port *priv = dev_get_priv(dev); + + return sh_serial_getc_generic(priv); +} + +static int sh_serial_setbrg(struct udevice *dev, int baudrate) +{ + struct sh_serial_platdata *plat = dev_get_platdata(dev); + struct uart_port *priv = dev_get_priv(dev); + + sh_serial_setbrg_generic(priv, plat->clk, baudrate); + + return 0; +} + +static int sh_serial_probe(struct udevice *dev) +{ + struct sh_serial_platdata *plat = dev_get_platdata(dev); + struct uart_port *priv = dev_get_priv(dev); + + priv->membase = (unsigned char *)plat->base; + priv->mapbase = plat->base; + priv->type = plat->type; + priv->clk_mode = plat->clk_mode; + + sh_serial_init_generic(priv); + + return 0; +} + +static const struct dm_serial_ops sh_serial_ops = { + .putc = sh_serial_putc, + .pending = sh_serial_pending, + .getc = sh_serial_getc, + .setbrg = sh_serial_setbrg, +}; + +U_BOOT_DRIVER(serial_sh) = { + .name = "serial_sh", + .id = UCLASS_SERIAL, + .probe = sh_serial_probe, + .ops = &sh_serial_ops, + .flags = DM_FLAG_PRE_RELOC, + .priv_auto_alloc_size = sizeof(struct uart_port), +}; + +#else /* CONFIG_DM_SERIAL */ + +#if defined(CONFIG_CONS_SCIF0) +# define SCIF_BASE SCIF0_BASE +#elif defined(CONFIG_CONS_SCIF1) +# define SCIF_BASE SCIF1_BASE +#elif defined(CONFIG_CONS_SCIF2) +# define SCIF_BASE SCIF2_BASE +#elif defined(CONFIG_CONS_SCIF3) +# define SCIF_BASE SCIF3_BASE +#elif defined(CONFIG_CONS_SCIF4) +# define SCIF_BASE SCIF4_BASE +#elif defined(CONFIG_CONS_SCIF5) +# define SCIF_BASE SCIF5_BASE +#elif defined(CONFIG_CONS_SCIF6) +# define SCIF_BASE SCIF6_BASE +#elif defined(CONFIG_CONS_SCIF7) +# define SCIF_BASE SCIF7_BASE +#else +# error "Default SCIF doesn't set....." +#endif + +#if defined(CONFIG_SCIF_A) + #define SCIF_BASE_PORT PORT_SCIFA +#else + #define SCIF_BASE_PORT PORT_SCIF +#endif + +static struct uart_port sh_sci = { + .membase = (unsigned char *)SCIF_BASE, + .mapbase = SCIF_BASE, + .type = SCIF_BASE_PORT, +#ifdef CONFIG_SCIF_USE_EXT_CLK + .clk_mode = EXT_CLK, +#endif +}; + +static void sh_serial_setbrg(void) +{ + DECLARE_GLOBAL_DATA_PTR; + struct uart_port *port = &sh_sci; + + sh_serial_setbrg_generic(port, CONFIG_SH_SCIF_CLK_FREQ, gd->baudrate); +} + +static int sh_serial_init(void) +{ + struct uart_port *port = &sh_sci; + + sh_serial_init_generic(port); + serial_setbrg(); + + return 0; +} + +static void sh_serial_putc(const char c) +{ + struct uart_port *port = &sh_sci; + + if (c == '\n') { + while (1) { + if (serial_raw_putc(port, '\r') != -EAGAIN) + break; + } + } + while (1) { + if (serial_raw_putc(port, c) != -EAGAIN) + break; + } +} + +static int sh_serial_tstc(void) +{ + struct uart_port *port = &sh_sci; + + return sh_serial_tstc_generic(port); +} + +static int sh_serial_getc(void) +{ + struct uart_port *port = &sh_sci; + int ch; + + while (1) { + ch = sh_serial_getc_generic(port); + if (ch != -EAGAIN) + break; + } - if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci)) - handle_error(); return ch; } @@ -206,3 +322,4 @@ __weak struct serial_device *default_serial_console(void) { return &sh_serial_drv; } +#endif /* CONFIG_DM_SERIAL */ diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h index ef88c8f..528aa73 100644 --- a/drivers/serial/serial_sh.h +++ b/drivers/serial/serial_sh.h @@ -2,18 +2,16 @@ * Copy and modify from linux/drivers/serial/sh-sci.h */ +#include <dm/platform_data/serial_sh.h> + struct uart_port { unsigned long iobase; /* in/out[bwl] */ unsigned char *membase; /* read/write[bwl] */ unsigned long mapbase; /* for ioremap */ - unsigned int type; /* port type */ + enum sh_serial_type type; /* port type */ + enum sh_clk_mode clk_mode; /* clock mode */ }; -#define PORT_SCI 52 -#define PORT_SCIF 53 -#define PORT_SCIFA 83 -#define PORT_SCIFB 93 - #if defined(CONFIG_H83007) || defined(CONFIG_H83068) #include <asm/regs306x.h> #endif @@ -526,6 +524,7 @@ SCIF_FNS(SCFDR, 0x1c, 16) SCIF_FNS(SCxTDR, 0x20, 8) SCIF_FNS(SCxRDR, 0x24, 8) SCIF_FNS(SCLSR, 0x00, 0) +SCIF_FNS(DL, 0x00, 0) /* dummy */ #elif defined(CONFIG_ARCH_SH7372) || \ defined(CONFIG_R8A7740) SCIF_FNS(SCSMR, 0x00, 16) @@ -541,6 +540,7 @@ SCIF_FNS(SCRFDR, 0x3c, 16) SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8) SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8) SCIF_FNS(SCLSR, 0x00, 0) +SCIF_FNS(DL, 0x00, 0) /* dummy */ #elif defined(CONFIG_CPU_SH7723) ||\ defined(CONFIG_CPU_SH7724) SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16) @@ -555,6 +555,7 @@ SCIF_FNS(SCFER, 0x10, 16) SCIF_FNS(SCFCR, 0x18, 16) SCIF_FNS(SCFDR, 0x1c, 16) SCIF_FNS(SCLSR, 0x24, 16) +SCIF_FNS(DL, 0x00, 0) /* dummy */ #else /* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/ /* name off sz off sz off sz off sz off sz*/ @@ -583,18 +584,21 @@ SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) SCIF_FNS(SCLSR, 0, 0, 0x28, 16) #else + SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) #if defined(CONFIG_CPU_SH7722) SCIF_FNS(SCSPTR, 0, 0, 0, 0) #else SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) #endif +SCIF_FNS(SCLSR, 0, 0, 0x24, 16) +#endif #if defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) SCIF_FNS(DL, 0, 0, 0x30, 16) SCIF_FNS(CKS, 0, 0, 0x34, 16) -#endif -SCIF_FNS(SCLSR, 0, 0, 0x24, 16) +#else +SCIF_FNS(DL, 0, 0, 0x0, 0) /* dummy */ #endif #endif #define sci_in(port, reg) sci_##reg##_in(port) @@ -725,14 +729,14 @@ static inline int sci_rxd_in(struct uart_port *port) #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) #elif defined(CONFIG_CPU_SH7723) ||\ defined(CONFIG_CPU_SH7724) -static inline int scbrr_calc(struct uart_port port, int bps, int clk) +static inline int scbrr_calc(struct uart_port *port, int bps, int clk) { - if (port.type == PORT_SCIF) + if (port->type == PORT_SCIF) return (clk+16*bps)/(32*bps)-1; else return ((clk*2)+16*bps)/(16*bps)-1; } -#define SCBRR_VALUE(bps, clk) scbrr_calc(sh_sci, bps, clk) +#define SCBRR_VALUE(bps, clk) scbrr_calc(port, bps, clk) #elif defined(__H8300H__) || defined(__H8300S__) #define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1) #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ @@ -742,3 +746,7 @@ static inline int scbrr_calc(struct uart_port port, int bps, int clk) #else /* Generic SH */ #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) #endif + +#ifndef DL_VALUE +#define DL_VALUE(bps, clk) 0 +#endif diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index e1678e6..7ae2727 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -2,5 +2,11 @@ config DM_SPI bool "Enable Driver Model for SPI drivers" depends on DM help - If you want to use driver model for SPI drivers, say Y. - To use legacy SPI drivers, say N. + Enable driver model for SPI. The SPI slave interface + (spi_setup_slave(), spi_xfer(), etc.) is then implemented by + the SPI uclass. Drivers provide methods to access the SPI + buses that they control. The uclass interface is defined in + include/spi.h. The existing spi_slave structure is attached + as 'parent data' to every slave on each bus. Slaves + typically use driver-private data instead of extending the + spi_slave structure. diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig new file mode 100644 index 0000000..3c6b36d --- /dev/null +++ b/drivers/thermal/Kconfig @@ -0,0 +1,7 @@ +config DM_THERMAL + bool "Driver support for thermal devices" + help + Enable support for temporary-sensing devices. Some SoCs have on-chip + temperature sensors to permit warnings, speed throttling or even + automatic power-off when the temperature gets too high or low. Other + devices may be discrete but connected on a suitable bus. diff --git a/include/config_defaults.h b/include/config_defaults.h index 4d49315..ad08c1d 100644 --- a/include/config_defaults.h +++ b/include/config_defaults.h @@ -20,10 +20,4 @@ #define CONFIG_ZLIB 1 #define CONFIG_PARTITIONS 1 -#ifndef CONFIG_SPL_BUILD -#define CONFIG_DM_WARN -#define CONFIG_DM_DEVICE_REMOVE -#define CONFIG_DM_STDIO -#endif - #endif diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 2aea899..73e1b0a 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -20,8 +20,10 @@ */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL +#ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_serial_clock() +#endif #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index 8eeb15c..7a1499d 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -11,6 +11,10 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <linux/kconfig.h> + +#define CONFIG_SYS_GENERIC_BOARD + /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ @@ -19,10 +23,10 @@ * and Arches dual (460GT) */ #ifdef CONFIG_CANYONLANDS -#define CONFIG_460EX 1 /* Specific PPC460EX */ +#define CONFIG_460EX /* Specific PPC460EX */ #define CONFIG_HOSTNAME canyonlands #else -#define CONFIG_460GT 1 /* Specific PPC460GT */ +#define CONFIG_460GT /* Specific PPC460GT */ #ifdef CONFIG_GLACIER #define CONFIG_HOSTNAME glacier #else @@ -32,7 +36,7 @@ #endif #endif -#define CONFIG_440 1 +#define CONFIG_440 #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFF80000 @@ -45,10 +49,10 @@ #define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */ -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_BOARD_TYPES 1 /* support board types */ +#define CONFIG_BOARD_EARLY_INIT_F /* Call board_early_init_f */ +#define CONFIG_BOARD_EARLY_INIT_R /* Call board_early_init_r */ +#define CONFIG_MISC_INIT_R /* Call misc_init_r */ +#define CONFIG_BOARD_TYPES /* support board types */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -134,7 +138,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */ +#define CONFIG_SYS_FLASH_CFI_AMD_RESET /* Use AMD (Spansion) reset cmd */ #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ @@ -172,9 +176,9 @@ * I2C SPD DIMM autodetection/calibration doesn't fit into the 4k of boot * code. */ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x50, 0x51} /* SPD i2c spd addresses*/ -#define CONFIG_DDR_ECC 1 /* with ECC support */ +#define CONFIG_DDR_ECC /* with ECC support */ #define CONFIG_DDR_RQDC_FIXED 0x80000038 /* fixed value for RQDC */ #else /* defined(CONFIG_ARCHES) */ @@ -262,8 +266,8 @@ #define CONFIG_4xx_CONFIG_BLOCKSIZE 16 /* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_AD7414 1 /* use AD7414 */ +#define CONFIG_DTT_LM75 /* ON Semi's LM75 */ +#define CONFIG_DTT_AD7414 /* use AD7414 */ #define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ #define CONFIG_SYS_DTT_MAX_TEMP 70 #define CONFIG_SYS_DTT_LOW_TEMP -30 @@ -275,14 +279,14 @@ #if !defined(CONFIG_ARCHES) /* RTC configuration */ -#define CONFIG_RTC_M41T62 1 +#define CONFIG_RTC_M41T62 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 #endif /*----------------------------------------------------------------------- * Ethernet *----------------------------------------------------------------------*/ -#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_IBM_EMAC4_V4 #define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 @@ -322,9 +326,9 @@ #define CONFIG_GPCS_PHY2_ADDR 0xC #endif /* !defined(CONFIG_ARCHES) */ -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ -#define CONFIG_PHY_DYNAMIC_ANEG 1 +#define CONFIG_PHY_RESET /* reset phy upon startup */ +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#define CONFIG_PHY_DYNAMIC_ANEG /*----------------------------------------------------------------------- * USB-OHCI diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 1f64495..4207504 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -21,14 +21,7 @@ #define CONFIG_MACH_TYPE 4273 #ifndef CONFIG_SPL_BUILD -#define CONFIG_DM -#define CONFIG_CMD_DM - -#define CONFIG_DM_GPIO #define CONFIG_CMD_GPIO - -#define CONFIG_DM_SERIAL -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif /* Display information on boot */ diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index 1f3ee55..59676ae 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -17,12 +17,6 @@ #include <linux/sizes.h> #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL -#define CONFIG_DM_SPI -#define CONFIG_DM_SPI_FLASH #define CONFIG_ARCH_CPU_INIT #define CONFIG_DISPLAY_CPUINFO @@ -42,7 +36,6 @@ #define CONFIG_ENV_OVERWRITE /* Size of malloc() pool before and after relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20)) /* select serial console configuration */ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 4f137fc..620f950 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -39,7 +39,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) /* Init Functions */ #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index f0f721e..4aa8101 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -25,9 +25,6 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG -#define CONFIG_DM -#define CONFIG_DM_THERMAL -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_IMX6_THERMAL #define CONFIG_SYS_GENERIC_BOARD diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 404b922..1005b9e 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -229,7 +229,6 @@ #define CONFIG_DM #define CONFIG_DM_THERMAL -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_IMX6_THERMAL #define CONFIG_CMD_FUSE diff --git a/include/configs/novena.h b/include/configs/novena.h index ea75d2c..074110c 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -116,7 +116,6 @@ #define CONFIG_SYS_MEMTEST_END 0x20000000 #define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024) -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) /* SPL */ #define CONFIG_SPL_FAT_SUPPORT diff --git a/include/configs/peach-pi.h b/include/configs/peach-pi.h index a1c980d..f724164 100644 --- a/include/configs/peach-pi.h +++ b/include/configs/peach-pi.h @@ -44,7 +44,6 @@ #define CONFIG_POWER_TPS65090_EC #define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */ -#define CONFIG_DM_CROS_EC #define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_EXYNOS diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h index 6516a72..de12a9e 100644 --- a/include/configs/peach-pit.h +++ b/include/configs/peach-pit.h @@ -44,7 +44,6 @@ #define CONFIG_POWER_TPS65090_EC #define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */ -#define CONFIG_DM_CROS_EC #define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_EXYNOS diff --git a/include/configs/rpi.h b/include/configs/rpi.h index c94f411..7ad8d08 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -30,12 +30,6 @@ */ #define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 -/* Enable driver model */ -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL - /* Memory layout */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0x00000000 @@ -52,7 +46,6 @@ CONFIG_SYS_SDRAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MALLOC_LEN SZ_4M -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_SYS_MEMTEST_START 0x00100000 #define CONFIG_SYS_MEMTEST_END 0x00200000 #define CONFIG_LOADADDR 0x00200000 diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index dfa2e07..8fadc68 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -40,7 +40,6 @@ #define CONFIG_CMDLINE_EDITING /* Size of malloc() pool before and after relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20)) /* @@ -290,9 +289,5 @@ #define CONFIG_OF_LIBFDT #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL #endif /* __CONFIG_H */ diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index e9d3f32..5c11650 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -23,15 +23,6 @@ #define CONFIG_BOOTSTAGE #define CONFIG_BOOTSTAGE_REPORT -#define CONFIG_CMD_DEMO -#define CONFIG_CMD_DM -#define CONFIG_DM_DEMO -#define CONFIG_DM_DEMO_SIMPLE -#define CONFIG_DM_DEMO_SHAPE -#define CONFIG_DM_GPIO -#define CONFIG_DM_TEST -#define CONFIG_DM_SERIAL -#define CONFIG_DM_CROS_EC #define CONFIG_SYS_STDIO_DEREGISTER @@ -69,7 +60,6 @@ /* * Size of malloc() pool, before and after relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_MALLOC_F_ADDR 0x0010000 #define CONFIG_SYS_MALLOC_LEN (32 << 20) /* 32MB */ @@ -96,8 +86,6 @@ #define CONFIG_CMD_SF_TEST #define CONFIG_CMD_SPI #define CONFIG_SPI_FLASH -#define CONFIG_DM_SPI -#define CONFIG_DM_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL #define CONFIG_SPI_FLASH_EON #define CONFIG_SPI_FLASH_GIGADEVICE @@ -108,7 +96,6 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_WINBOND -#define CONFIG_DM_I2C #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C_SANDBOX #define CONFIG_I2C_EDID diff --git a/include/configs/silk.h b/include/configs/silk.h new file mode 100644 index 0000000..a4235e9 --- /dev/null +++ b/include/configs/silk.h @@ -0,0 +1,117 @@ +/* + * include/configs/silk.h + * This file is silk board configuration. + * + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __SILK_H +#define __SILK_H + +#undef DEBUG +#define CONFIG_R8A7794 +#define CONFIG_RMOBILE_BOARD_STRING "Silk" + +#include "rcar-gen2-common.h" + +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_TEXT_BASE 0x70000000 +#else +#define CONFIG_SYS_TEXT_BASE 0xE6304000 +#endif + +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC +#else +#define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC +#endif +#define STACK_AREA_SIZE 0xC000 +#define LOW_LEVEL_MERAM_STACK \ + (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + +/* MEMORY */ +#define RCAR_GEN2_SDRAM_BASE 0x40000000 +#define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024) +#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE +#define CONFIG_CONS_SCIF2 +#define CONFIG_SCIF_USE_EXT_CLK + +/* FLASH */ +#define CONFIG_SPI +#define CONFIG_SPI_FLASH_BAR +#define CONFIG_SH_QSPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_QUAD +#define CONFIG_SYS_NO_FLASH + +/* SH Ether */ +#define CONFIG_NET_MULTI +#define CONFIG_SH_ETHER +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 0x1 +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CONFIG_SH_ETHER_CACHE_WRITEBACK +#define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +/* Board Clock */ +#define RMOBILE_XTAL_CLK 20000000u +#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK +#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */ +#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2) +#define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24) +#define CONFIG_SH_SCIF_CLK_FREQ 14745600 /* External Clock */ + +#define CONFIG_SYS_TMU_CLK_DIV 4 + +/* i2c */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SH +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3 +#define CONFIG_SYS_I2C_SH_SPEED0 400000 +#define CONFIG_SYS_I2C_SH_SPEED1 400000 +#define CONFIG_SYS_I2C_SH_SPEED2 400000 +#define CONFIG_SH_I2C_DATA_HIGH 4 +#define CONFIG_SH_I2C_DATA_LOW 5 +#define CONFIG_SH_I2C_CLOCK 10000000 + +#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ + +/* USB */ +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_RMOBILE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + +/* MMCIF */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_MMC +#define CONFIG_SH_MMCIF +#define CONFIG_SH_MMCIF_ADDR 0xee200000 +#define CONFIG_SH_MMCIF_CLK 48000000 + +/* Module stop status bits */ +/* INTC-RT */ +#define CONFIG_SMSTP0_ENA 0x00400000 +/* MSIF */ +#define CONFIG_SMSTP2_ENA 0x00002000 +/* INTC-SYS, IRQC */ +#define CONFIG_SMSTP4_ENA 0x00000180 +/* SCIF2 */ +#define CONFIG_SMSTP7_ENA 0x00080000 + +#endif /* __SILK_H */ diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 982d0dc..080fc3a 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -48,9 +48,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) -/* Small malloc pool before relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) - /* * select serial console configuration */ @@ -224,9 +221,5 @@ #define CONFIG_OF_LIBFDT #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL #endif /* __CONFIG_H */ diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 9fa644f..6c68596 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -21,11 +21,6 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) /* CPU */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 6b1f967..ee227fe 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -190,10 +190,6 @@ unsigned int cm_get_l4_sp_clk_hz(void); * QSPI support */ #ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */ -#define CONFIG_CMD_DM -#define CONFIG_DM -#define CONFIG_DM_SPI -#define CONFIG_DM_SPI_FLASH #define CONFIG_CADENCE_QSPI /* Enable multiple SPI NOR flash manufacturers */ #define CONFIG_SPI_FLASH /* SPI flash subsystem */ @@ -210,9 +206,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #endif #ifdef CONFIG_OF_CONTROL /* DW SPI is controlled via DT */ -#define CONFIG_CMD_DM -#define CONFIG_DM -#define CONFIG_DM_SPI #define CONFIG_DESIGNWARE_SPI #define CONFIG_CMD_SPI #endif diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index fd9bd63..156e0fa 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -28,21 +28,10 @@ (PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE) #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024) -#define CONFIG_SYS_MALLOC_F_LEN 0x2000 -#define CONFIG_DM /* serial port (PL011) configuration */ #define CONFIG_BAUDRATE 115200 -#ifdef CONFIG_DM -#define CONFIG_DM_SERIAL #define CONFIG_PL01X_SERIAL -#else -#define CONFIG_SYS_SERIAL0 0x80406000 -#define CONFIG_CONS_INDEX 0 -#define CONFIG_PL011_SERIAL -#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0} -#define CONFIG_PL011_CLOCK (2700 * 1000) -#endif /* user interface */ #define CONFIG_SYS_PROMPT "STV0991> " diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index cea52db..09889ee 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -28,11 +28,7 @@ #define CONFIG_SYS_TEXT_BASE 0x4a000000 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM) -# define CONFIG_CMD_DM -# define CONFIG_DM_GPIO -# define CONFIG_DM_SERIAL # define CONFIG_DW_SERIAL -# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif /* diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 8f1e370..005fc6a 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -18,16 +18,6 @@ #include <asm/arch/tegra.h> /* get chip and board defs */ -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#ifndef CONFIG_SPL_BUILD -#define CONFIG_DM_SERIAL -#endif -#define CONFIG_DM_SPI -#define CONFIG_DM_SPI_FLASH -#define CONFIG_DM_I2C - #define CONFIG_SYS_TIMER_RATE 1000000 #define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE @@ -47,7 +37,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */ diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 598526b..20a55f4 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -20,14 +20,7 @@ #define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC #ifndef CONFIG_SPL_BUILD -#ifndef CONFIG_DM -# define CONFIG_DM -#endif -# define CONFIG_CMD_DM -# define CONFIG_DM_GPIO -# define CONFIG_DM_SERIAL # define CONFIG_OMAP_SERIAL -# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif #include <asm/arch/omap.h> diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 3c634ee..840e108 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -19,12 +19,7 @@ #include <asm/arch/omap3.h> #ifndef CONFIG_SPL_BUILD -# define CONFIG_DM -# define CONFIG_CMD_DM -# define CONFIG_DM_GPIO -# define CONFIG_DM_SERIAL # define CONFIG_OMAP_SERIAL -# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif /* The chip has SDRC controller */ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 9420e6b..3f738fb 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -80,8 +80,6 @@ #define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE #define CONFIG_SMC911X_32_BIT -#define CONFIG_SYS_MALLOC_F_LEN 0x2000 - /*----------------------------------------------------------------------- * MMU and Cache Setting *----------------------------------------------------------------------*/ @@ -192,8 +190,6 @@ #define CONFIG_FAT_WRITE #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_DM - /* memtest works on */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 062e6c2..994874c 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -22,11 +22,6 @@ #define CONFIG_DISPLAY_BOARDINFO_LATE #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL - #define CONFIG_LMB #define CONFIG_OF_LIBFDT @@ -192,7 +187,6 @@ #define CONFIG_SYS_STACK_SIZE (32 * 1024) #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MALLOC_LEN 0x200000 -#define CONFIG_SYS_MALLOC_F_LEN (2 << 10) /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/dm/device.h b/include/dm/device.h index 81afa8c..7a48eb8 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -12,6 +12,7 @@ #define _DM_DEVICE_H #include <dm/uclass-id.h> +#include <fdtdec.h> #include <linker_lists.h> #include <linux/list.h> @@ -351,4 +352,13 @@ int device_find_first_child(struct udevice *parent, struct udevice **devp); */ int device_find_next_child(struct udevice **devp); +/** + * dev_get_addr() - Get the reg property of a device + * + * @dev: Pointer to a device + * + * @return addr + */ +fdt_addr_t dev_get_addr(struct udevice *dev); + #endif diff --git a/include/dm/platform_data/serial_sh.h b/include/dm/platform_data/serial_sh.h new file mode 100644 index 0000000..0271ad6 --- /dev/null +++ b/include/dm/platform_data/serial_sh.h @@ -0,0 +1,37 @@ +/* + * Copyright (c) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * Copyright (c) 2014 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __serial_sh_h +#define __serial_sh_h + +enum sh_clk_mode { + INT_CLK, + EXT_CLK, +}; + +enum sh_serial_type { + PORT_SCI, + PORT_SCIF, + PORT_SCIFA, + PORT_SCIFB, +}; + +/* + * Information about SCIF port + * + * @base: Register base address + * @clk: Input clock rate, used for calculating the baud rate divisor + * @clk_mode: Clock mode, set internal (INT) or external (EXT) + * @type: Type of SCIF + */ +struct sh_serial_platdata { + unsigned long base; + unsigned int clk; + enum sh_clk_mode clk_mode; + enum sh_serial_type type; +}; +#endif /* __serial_sh_h */ diff --git a/include/i2c.h b/include/i2c.h index 27fe00f..31b0389 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -25,14 +25,13 @@ * enough as to be incompatible for compilation purposes. */ -#ifdef CONFIG_DM_I2C - enum dm_i2c_chip_flags { DM_I2C_CHIP_10BIT = 1 << 0, /* Use 10-bit addressing */ DM_I2C_CHIP_RD_ADDRESS = 1 << 1, /* Send address for each read byte */ DM_I2C_CHIP_WR_ADDRESS = 1 << 2, /* Send address for each write byte */ }; +struct udevice; /** * struct dm_i2c_chip - information about an i2c chip * @@ -125,21 +124,21 @@ int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags, struct udevice **devp); /** - * i2c_set_bus_speed() - set the speed of a bus + * dm_i2c_set_bus_speed() - set the speed of a bus * * @bus: Bus to adjust * @speed: Requested speed in Hz * @return 0 if OK, -EINVAL for invalid values */ -int i2c_set_bus_speed(struct udevice *bus, unsigned int speed); +int dm_i2c_set_bus_speed(struct udevice *bus, unsigned int speed); /** - * i2c_get_bus_speed() - get the speed of a bus + * dm_i2c_get_bus_speed() - get the speed of a bus * * @bus: Bus to check * @return speed of selected I2C bus in Hz, -ve on error */ -int i2c_get_bus_speed(struct udevice *bus); +int dm_i2c_get_bus_speed(struct udevice *bus); /** * i2c_set_chip_flags() - set flags for a chip @@ -439,8 +438,6 @@ int i2c_get_chip_for_busnum(int busnum, int chip_addr, uint offset_len, int i2c_chip_ofdata_to_platdata(const void *blob, int node, struct dm_i2c_chip *chip); -#endif - #ifndef CONFIG_DM_I2C /* diff --git a/include/net.h b/include/net.h index 73ea88b..43e3d28 100644 --- a/include/net.h +++ b/include/net.h @@ -512,10 +512,6 @@ unsigned add_ip_checksums(unsigned offset, unsigned sum, unsigned new_sum); */ int ip_checksum_ok(const void *addr, unsigned nbytes); -/* Checksum */ -extern int NetCksumOk(uchar *, int); /* Return true if cksum OK */ -extern uint NetCksum(uchar *, int); /* Calculate the checksum */ - /* Callbacks */ extern rxhand_f *net_get_udp_handler(void); /* Get UDP RX packet handler */ extern void net_set_udp_handler(rxhand_f *); /* Set UDP RX packet handler */ @@ -1086,7 +1086,7 @@ NetReceive(uchar *inpkt, int len) if ((ip->ip_hl_v & 0x0f) > 0x05) return; /* Check the Checksum of the header */ - if (!NetCksumOk((uchar *)ip, IP_HDR_SIZE / 2)) { + if (!ip_checksum_ok((uchar *)ip, IP_HDR_SIZE)) { debug("checksum bad\n"); return; } @@ -1291,27 +1291,6 @@ common: /**********************************************************************/ int -NetCksumOk(uchar *ptr, int len) -{ - return !((NetCksum(ptr, len) + 1) & 0xfffe); -} - - -unsigned -NetCksum(uchar *ptr, int len) -{ - ulong xsum; - ushort *p = (ushort *)ptr; - - xsum = 0; - while (len-- > 0) - xsum += *p++; - xsum = (xsum & 0xffff) + (xsum >> 16); - xsum = (xsum & 0xffff) + (xsum >> 16); - return xsum & 0xffff; -} - -int NetEthHdrSize(void) { ushort myvlanid; @@ -1410,7 +1389,7 @@ void net_set_udp_header(uchar *pkt, IPaddr_t dest, int dport, int sport, net_set_ip_header(pkt, dest, NetOurIP); ip->ip_len = htons(IP_UDP_HDR_SIZE + len); ip->ip_p = IPPROTO_UDP; - ip->ip_sum = ~NetCksum((uchar *)ip, IP_HDR_SIZE >> 1); + ip->ip_sum = compute_ip_checksum(ip, IP_HDR_SIZE); ip->udp_src = htons(sport); ip->udp_dst = htons(dport); @@ -29,14 +29,14 @@ static void set_icmp_header(uchar *pkt, IPaddr_t dest) ip->ip_len = htons(IP_ICMP_HDR_SIZE); ip->ip_p = IPPROTO_ICMP; - ip->ip_sum = ~NetCksum((uchar *)ip, IP_HDR_SIZE >> 1); + ip->ip_sum = compute_ip_checksum(ip, IP_HDR_SIZE); icmp->type = ICMP_ECHO_REQUEST; icmp->code = 0; icmp->checksum = 0; icmp->un.echo.id = 0; icmp->un.echo.sequence = htons(PingSeqNo++); - icmp->checksum = ~NetCksum((uchar *)icmp, ICMP_HDR_SIZE >> 1); + icmp->checksum = compute_ip_checksum(icmp, ICMP_HDR_SIZE); } static int ping_send(void) @@ -101,13 +101,11 @@ void ping_receive(struct ethernet_hdr *et, struct ip_udp_hdr *ip, int len) ip->ip_off = 0; NetCopyIP((void *)&ip->ip_dst, &ip->ip_src); NetCopyIP((void *)&ip->ip_src, &NetOurIP); - ip->ip_sum = ~NetCksum((uchar *)ip, - IP_HDR_SIZE >> 1); + ip->ip_sum = compute_ip_checksum(ip, IP_HDR_SIZE); icmph->type = ICMP_ECHO_REPLY; icmph->checksum = 0; - icmph->checksum = ~NetCksum((uchar *)icmph, - (len - IP_HDR_SIZE) >> 1); + icmph->checksum = compute_ip_checksum(icmph, len - IP_HDR_SIZE); NetSendPacket((uchar *)et, eth_hdr_size + len); return; /* default: diff --git a/test/Kconfig b/test/Kconfig new file mode 100644 index 0000000..1fb1716 --- /dev/null +++ b/test/Kconfig @@ -0,0 +1 @@ +source "test/dm/Kconfig" diff --git a/test/dm/Kconfig b/test/dm/Kconfig new file mode 100644 index 0000000..a9d0298 --- /dev/null +++ b/test/dm/Kconfig @@ -0,0 +1,8 @@ +config DM_TEST + bool "Enable driver model test command" + depends on SANDBOX && CMD_DM + help + This enables the 'dm test' command which runs a series of unit + tests on the driver model code. Each subsystem (uclass) is tested. + If all is well then all tests pass although there will be a few + messages printed along the way. diff --git a/test/dm/i2c.c b/test/dm/i2c.c index ef88372..541b73b 100644 --- a/test/dm/i2c.c +++ b/test/dm/i2c.c @@ -67,10 +67,10 @@ static int dm_test_i2c_speed(struct dm_test_state *dms) ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); ut_assertok(i2c_get_chip(bus, chip, 1, &dev)); - ut_assertok(i2c_set_bus_speed(bus, 100000)); + ut_assertok(dm_i2c_set_bus_speed(bus, 100000)); ut_assertok(dm_i2c_read(dev, 0, buf, 5)); - ut_assertok(i2c_set_bus_speed(bus, 400000)); - ut_asserteq(400000, i2c_get_bus_speed(bus)); + ut_assertok(dm_i2c_set_bus_speed(bus, 400000)); + ut_asserteq(400000, dm_i2c_get_bus_speed(bus)); ut_assertok(dm_i2c_read(dev, 0, buf, 5)); ut_asserteq(-EINVAL, dm_i2c_write(dev, 0, buf, 5)); |