diff options
-rw-r--r-- | arch/arm/include/asm/arch-u8500/hardware.h | 11 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-u8500/prcmu.h | 7 | ||||
-rw-r--r-- | board/st-ericsson/snowball/snowball.c | 87 | ||||
-rw-r--r-- | include/configs/snowball.h | 1 |
4 files changed, 103 insertions, 3 deletions
diff --git a/arch/arm/include/asm/arch-u8500/hardware.h b/arch/arm/include/asm/arch-u8500/hardware.h index 9208880..8044ac3 100644 --- a/arch/arm/include/asm/arch-u8500/hardware.h +++ b/arch/arm/include/asm/arch-u8500/hardware.h @@ -62,7 +62,7 @@ /* Per4 */ #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) -#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x06800) +#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) /* Per3 */ #define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) @@ -80,4 +80,13 @@ #define U8500_BOOTROM_BASE 0x9001f000 #define U8500_BOOTROM_ASIC_ID_OFFSET 0x0ff4 +/* AB8500 specifics */ +#define AB8500_MISC 0x0010 +#define AB8500_GPIO_SEL2_REG 0x1001 +#define AB8500_GPIO_DIR2_REG 0x1011 +#define AB8500_GPIO_DIR4_REG 0x1013 +#define AB8500_GPIO_SEL4_REG 0x1003 +#define AB8500_GPIO_OUT2_REG 0x1021 +#define AB8500_GPIO_OUT4_REG 0x1023 + #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-u8500/prcmu.h b/arch/arm/include/asm/arch-u8500/prcmu.h index 9862eb3..e9dcc93 100644 --- a/arch/arm/include/asm/arch-u8500/prcmu.h +++ b/arch/arm/include/asm/arch-u8500/prcmu.h @@ -64,8 +64,11 @@ #define REQ_MB5 5 -extern int prcmu_i2c_read(u8 reg, u16 slave); -extern int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data); +#define ab8500_read prcmu_i2c_read +#define ab8500_write prcmu_i2c_write + +int prcmu_i2c_read(u8 reg, u16 slave); +int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data); void u8500_prcmu_enable(u32 *reg); void db8500_prcmu_init(void); diff --git a/board/st-ericsson/snowball/snowball.c b/board/st-ericsson/snowball/snowball.c index 4bcc649..7c3e08c 100644 --- a/board/st-ericsson/snowball/snowball.c +++ b/board/st-ericsson/snowball/snowball.c @@ -25,6 +25,8 @@ #include <asm/io.h> #include <asm/errno.h> #include <asm/arch/db8500_pincfg.h> +#include <asm/arch/prcmu.h> +#include <asm/arch/hardware.h> #include "db8500_pins.h" @@ -164,3 +166,88 @@ int dram_init(void) return 0; } + +static int raise_ab8500_gpio16(void) +{ + int ret; + + /* selection */ + ret = ab8500_read(AB8500_MISC, AB8500_GPIO_SEL2_REG); + if (ret < 0) + goto out; + + ret |= 0x80; + ret = ab8500_write(AB8500_MISC, AB8500_GPIO_SEL2_REG, ret); + if (ret < 0) + goto out; + + /* direction */ + ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR2_REG); + if (ret < 0) + goto out; + + ret |= 0x80; + ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR2_REG, ret); + if (ret < 0) + goto out; + + /* out */ + ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT2_REG); + if (ret < 0) + goto out; + + ret |= 0x80; + ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT2_REG, ret); + +out: + return ret; +} + +static int raise_ab8500_gpio26(void) +{ + int ret; + + /* selection */ + ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR4_REG); + if (ret < 0) + goto out; + + ret |= 0x2; + ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR4_REG, ret); + if (ret < 0) + goto out; + + /* out */ + ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT4_REG); + if (ret < 0) + goto out; + + ret |= 0x2; + ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT4_REG, ret); + +out: + return ret; +} + +int board_late_init(void) +{ + /* enable 3V3 for LAN controller */ + if (raise_ab8500_gpio26() >= 0) { + /* Turn on FSMC device */ + writel(0x1, 0x8000f000); + writel(0x1, 0x8000f008); + + /* setup FSMC for LAN controler */ + writel(0x305b, 0x80000000); + + /* run at the highest possible speed */ + writel(0x01010210, 0x80000004); + } else + printf("error: can't raise GPIO26\n"); + + /* enable 3v6 for GBF chip */ + if ((raise_ab8500_gpio16() < 0)) + printf("error: cant' raise GPIO16\n"); + + return 0; +} diff --git a/include/configs/snowball.h b/include/configs/snowball.h index d3ca55d..ed70d65 100644 --- a/include/configs/snowball.h +++ b/include/configs/snowball.h @@ -32,6 +32,7 @@ #define CONFIG_SYS_ICACHE_OFF #define CONFIG_SYS_DCACHE_OFF #define CONFIG_ARCH_CPU_INIT +#define CONFIG_BOARD_LATE_INIT /* * High Level Configuration Options |