diff options
28 files changed, 61 insertions, 1093 deletions
diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 329c7a7..cfa4209 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -109,5 +109,5 @@ endif ifdef CONFIG_ARM64 OBJCFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rela.dyn else -OBJCFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rel.dyn +OBJCFLAGS += -j .text -j .rodata -j .hash -j .data -j .got.plt -j .u_boot_list -j .rel.dyn endif diff --git a/arch/arm/cpu/armv7/exynos/config.mk b/arch/arm/cpu/armv7/exynos/config.mk new file mode 100644 index 0000000..ee0d2da --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/config.mk @@ -0,0 +1,7 @@ +# +# Copyright (C) Albert ARIBAUD <albert.u.boot@aribaud.net> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +SPL_OBJCFLAGS += -j .machine_param diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S index 69e3053..f1aea05 100644 --- a/arch/arm/cpu/armv7/lowlevel_init.S +++ b/arch/arm/cpu/armv7/lowlevel_init.S @@ -24,7 +24,7 @@ ENTRY(lowlevel_init) #ifdef CONFIG_SPL_BUILD ldr r9, =gdata #else - sub sp, #GD_SIZE + sub sp, sp, #GD_SIZE bic sp, sp, #7 mov r9, sp #endif diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index fcc4f35..f12bba2 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -5,6 +5,7 @@ */ #include <common.h> +#include <div64.h> #include <asm/io.h> #include <asm/errno.h> #include <asm/arch/imx-regs.h> @@ -123,7 +124,7 @@ static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num) return 0; } - return (freq * 18) / ((div & ANATOP_PFD_FRAC_MASK(pfd_num)) >> + return lldiv(freq * 18, (div & ANATOP_PFD_FRAC_MASK(pfd_num)) >> ANATOP_PFD_FRAC_SHIFT(pfd_num)); } diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index 9463a33..4da5d24 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -92,8 +92,6 @@ SECTIONS } .dynsym _end : { *(.dynsym) } - .hash : { *(.hash) } - .got.plt : { *(.got.plt) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } @@ -101,4 +99,5 @@ SECTIONS .interp : { *(.interp*) } .gnu : { *(.gnu*) } .ARM.exidx : { *(.ARM.exidx*) } + .gnu.linkonce.armexidx : { *(.gnu.linkonce.armexidx.*) } } diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index ac54b93..dfc2de9 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -67,7 +67,7 @@ ENTRY(_main) ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) #endif bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - sub sp, #GD_SIZE /* allocate one GD above SP */ + sub sp, sp, #GD_SIZE /* allocate one GD above SP */ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ mov r9, sp /* GD is above SP */ mov r0, #0 diff --git a/board/barco/titanium/titanium.c b/board/barco/titanium/titanium.c index 6db4488..84a7b84 100644 --- a/board/barco/titanium/titanium.c +++ b/board/barco/titanium/titanium.c @@ -264,15 +264,9 @@ int board_phy_config(struct phy_device *phydev) int board_eth_init(bd_t *bis) { - int ret; - setup_iomux_enet(); - ret = cpu_eth_init(bis); - if (ret) - printf("FEC MXC: %s:failed\n", __func__); - - return ret; + return cpu_eth_init(bis); } int board_early_init_f(void) diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c index e063407..6c51f3a 100644 --- a/board/freescale/mx6qarm2/mx6qarm2.c +++ b/board/freescale/mx6qarm2/mx6qarm2.c @@ -186,13 +186,10 @@ int fecmxc_mii_postcall(int phy) int board_eth_init(bd_t *bis) { struct eth_device *dev; - int ret; + int ret = cpu_eth_init(bis); - ret = cpu_eth_init(bis); - if (ret) { - printf("FEC MXC: %s:failed\n", __func__); + if (ret) return ret; - } dev = eth_get_dev_by_name("FEC"); if (!dev) { diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index fc75eae..928dadf 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -192,15 +192,9 @@ int board_phy_config(struct phy_device *phydev) int board_eth_init(bd_t *bis) { - int ret; - setup_iomux_enet(); - ret = cpu_eth_init(bis); - if (ret) - printf("FEC MXC: %s:failed\n", __func__); - - return ret; + return cpu_eth_init(bis); } #define BOARD_REV_B 0x200 diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 2ffc3b8..12d8c56 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -453,15 +453,9 @@ int overwrite_console(void) int board_eth_init(bd_t *bis) { - int ret; - setup_iomux_enet(); - ret = cpu_eth_init(bis); - if (ret) - printf("FEC MXC: %s:failed\n", __func__); - - return ret; + return cpu_eth_init(bis); } int board_early_init_f(void) diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index 643fdac..dfc5746 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -106,17 +106,9 @@ int board_mmc_init(bd_t *bis) #ifdef CONFIG_FEC_MXC int board_eth_init(bd_t *bis) { - int ret; - setup_iomux_fec(); - ret = cpu_eth_init(bis); - if (ret) { - printf("FEC MXC: %s:failed\n", __func__); - return ret; - } - - return 0; + return cpu_eth_init(bis); } static int setup_fec(void) diff --git a/board/friendlyarm/mini2440/Makefile b/board/friendlyarm/mini2440/Makefile deleted file mode 100644 index f367107..0000000 --- a/board/friendlyarm/mini2440/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2012 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := mini2440.o diff --git a/board/friendlyarm/mini2440/mini2440.c b/board/friendlyarm/mini2440/mini2440.c deleted file mode 100644 index 59ed054..0000000 --- a/board/friendlyarm/mini2440/mini2440.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> - * - * (C) Copyright 2009 - * Michel Pollet <buserror@gmail.com> - * - * (C) Copyright 2012 - * Gabriel Huau <contact@huau-gabriel.fr> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/s3c2440.h> -#include <asm/arch/iomux.h> -#include <asm/arch/gpio.h> -#include <asm/io.h> -#include <asm/gpio.h> -#include <netdev.h> -#include "mini2440.h" - -DECLARE_GLOBAL_DATA_PTR; - -static inline void pll_delay(unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b" : "=r" (loops) : "0" (loops)); -} - -int board_early_init_f(void) -{ - struct s3c24x0_clock_power * const clk_power = - s3c24x0_get_base_clock_power(); - - /* to reduce PLL lock time, adjust the LOCKTIME register */ - clk_power->locktime = 0xFFFFFF; /* Max PLL Lock time count */ - clk_power->clkdivn = CLKDIVN_VAL; - - /* configure UPLL */ - clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); - /* some delay between MPLL and UPLL */ - pll_delay(100); - - /* configure MPLL */ - clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); - - /* some delay between MPLL and UPLL */ - pll_delay(10000); - - return 0; -} - -/* - * Miscellaneous platform dependent initialisations - */ -int board_init(void) -{ - struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - - /* IOMUX Port H : UART Configuration */ - gpio->gphcon = IOMUXH_nCTS0 | IOMUXH_nRTS0 | IOMUXH_TXD0 | IOMUXH_RXD0 | - IOMUXH_TXD1 | IOMUXH_RXD1 | IOMUXH_TXD2 | IOMUXH_RXD2; - - gpio_direction_output(GPH8, 0); - gpio_direction_output(GPH9, 0); - gpio_direction_output(GPH10, 0); - - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_BOOT_PARAM_ADDR; - - return 0; -} - -int dram_init(void) -{ - struct s3c24x0_memctl *memctl = s3c24x0_get_base_memctl(); - - /* - * Configuring bus width and timing - * Initialize clocks for each bank 0..5 - * Bank 3 and 4 are used for DM9000 - */ - writel(BANK_CONF, &memctl->bwscon); - writel(B0_CONF, &memctl->bankcon[0]); - writel(B1_CONF, &memctl->bankcon[1]); - writel(B2_CONF, &memctl->bankcon[2]); - writel(B3_CONF, &memctl->bankcon[3]); - writel(B4_CONF, &memctl->bankcon[4]); - writel(B5_CONF, &memctl->bankcon[5]); - - /* Bank 6 and 7 are used for DRAM */ - writel(SDRAM_64MB, &memctl->bankcon[6]); - writel(SDRAM_64MB, &memctl->bankcon[7]); - - writel(MEM_TIMING, &memctl->refresh); - writel(BANKSIZE_CONF, &memctl->banksize); - writel(B6_MRSR, &memctl->mrsrb6); - writel(B7_MRSR, &memctl->mrsrb7); - - gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_SIZE); - return 0; -} - -int board_eth_init(bd_t *bis) -{ -#ifdef CONFIG_DRIVER_DM9000 - return dm9000_initialize(bis); -#else - return 0; -#endif -} diff --git a/board/friendlyarm/mini2440/mini2440.h b/board/friendlyarm/mini2440/mini2440.h deleted file mode 100644 index db386ea..0000000 --- a/board/friendlyarm/mini2440/mini2440.h +++ /dev/null @@ -1,144 +0,0 @@ -#ifndef __MINI2440_BOARD_CONF_H__ -#define __MINI2440_BOARD_CONF_H__ - -/* PLL Parameters */ -#define CLKDIVN_VAL 7 -#define M_MDIV 0x7f -#define M_PDIV 0x2 -#define M_SDIV 0x1 - -#define U_M_MDIV 0x38 -#define U_M_PDIV 0x2 -#define U_M_SDIV 0x2 - -/* BWSCON */ -#define DW8 0x0 -#define DW16 0x1 -#define DW32 0x2 -#define WAIT (0x1<<2) -#define UBLB (0x1<<3) - -#define B1_BWSCON (DW32) -#define B2_BWSCON (DW16) -#define B3_BWSCON (DW16 + WAIT + UBLB) -#define B4_BWSCON (DW16 + WAIT + UBLB) -#define B5_BWSCON (DW16) -#define B6_BWSCON (DW32) -#define B7_BWSCON (DW32) - -/* - * Bank Configuration - */ -#define B0_Tacs 0x0 /* 0clk */ -#define B0_Tcos 0x0 /* 0clk */ -#define B0_Tacc 0x7 /* 14clk */ -#define B0_Tcoh 0x0 /* 0clk */ -#define B0_Tah 0x0 /* 0clk */ -#define B0_Tacp 0x0 /* 0clk */ -#define B0_PMC 0x0 /* normal */ - -#define B1_Tacs 0x0 -#define B1_Tcos 0x0 -#define B1_Tacc 0x7 -#define B1_Tcoh 0x0 -#define B1_Tah 0x0 -#define B1_Tacp 0x0 -#define B1_PMC 0x0 - -#define B2_Tacs 0x0 -#define B2_Tcos 0x0 -#define B2_Tacc 0x7 -#define B2_Tcoh 0x0 -#define B2_Tah 0x0 -#define B2_Tacp 0x0 -#define B2_PMC 0x0 - -#define B3_Tacs 0x0 -#define B3_Tcos 0x3 /* 4clk */ -#define B3_Tacc 0x7 -#define B3_Tcoh 0x1 /* 1clk */ -#define B3_Tah 0x3 /* 4clk */ -#define B3_Tacp 0x0 -#define B3_PMC 0x0 - -#define B4_Tacs 0x0 -#define B4_Tcos 0x3 -#define B4_Tacc 0x7 -#define B4_Tcoh 0x1 -#define B4_Tah 0x3 -#define B4_Tacp 0x0 -#define B4_PMC 0x0 - -#define B5_Tacs 0x0 -#define B5_Tcos 0x0 -#define B5_Tacc 0x7 -#define B5_Tcoh 0x0 -#define B5_Tah 0x0 -#define B5_Tacp 0x0 -#define B5_PMC 0x0 - -/* - * SDRAM Configuration - */ -#define SDRAM_MT 0x3 /* SDRAM */ -#define SDRAM_Trcd 0x0 /* 2clk */ -#define SDRAM_SCAN_9 0x1 /* 9bit */ -#define SDRAM_SCAN_10 0x2 /* 10bit */ - -#define SDRAM_64MB ((SDRAM_MT<<15) + (SDRAM_Trcd<<2) + (SDRAM_SCAN_9)) - -/* - * Refresh Parameter - */ -#define REFEN 0x1 /* Refresh enable */ -#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -#define Trp 0x1 /* 3clk */ -#define Trc 0x3 /* 7clk */ -#define Tchr 0x0 /* unused */ -#define REFCNT 1012 /* period=10.37us, HCLK=100Mhz, (2048 + 1-10.37*100) */ - -/* - * MRSR Parameter - */ -#define BL 0x0 -#define BT 0x0 -#define CL 0x3 /* 3 clocks */ -#define TM 0x0 -#define WBL 0x0 - -/* - * BankSize Parameter - */ -#define BK76MAP 0x2 /* 128MB/128MB */ -#define SCLK_EN 0x1 /* SCLK active */ -#define SCKE_EN 0x1 /* SDRAM power down mode enable */ -#define BURST_EN 0x1 /* Burst enable */ - -/* - * Register values - */ -#define BANK_CONF ((0 + (B1_BWSCON<<4) + (B2_BWSCON<<8) + (B3_BWSCON<<12) + \ - (B4_BWSCON<<16) + (B5_BWSCON<<20) + (B6_BWSCON<<24) + \ - (B7_BWSCON<<28))) - -#define B0_CONF ((B0_Tacs<<13) + (B0_Tcos<<11) + (B0_Tacc<<8) + \ - (B0_Tcoh<<6) + (B0_Tah<<4) + (B0_Tacp<<2) + (B0_PMC)) -#define B1_CONF ((B1_Tacs<<13) + (B1_Tcos<<11) + (B1_Tacc<<8) + \ - (B1_Tcoh<<6) + (B1_Tah<<4) + (B1_Tacp<<2) + (B1_PMC)) -#define B2_CONF ((B2_Tacs<<13) + (B2_Tcos<<11) + (B2_Tacc<<8) + \ - (B2_Tcoh<<6) + (B2_Tah<<4) + (B2_Tacp<<2) + (B2_PMC)) -#define B3_CONF ((B3_Tacs<<13) + (B3_Tcos<<11) + (B3_Tacc<<8) + \ - (B3_Tcoh<<6) + (B3_Tah<<4) + (B3_Tacp<<2) + (B3_PMC)) -#define B4_CONF ((B4_Tacs<<13) + (B4_Tcos<<11) + (B4_Tacc<<8) + \ - (B4_Tcoh<<6) + (B4_Tah<<4) + (B4_Tacp<<2) + (B4_PMC)) -#define B5_CONF ((B5_Tacs<<13) + (B5_Tcos<<11) + (B5_Tacc<<8) + \ - (B5_Tcoh<<6) + (B5_Tah<<4) + (B5_Tacp<<2) + (B5_PMC)) - -#define MEM_TIMING (REFEN<<23) + (TREFMD<<22) + (Trp<<20) + \ - (Trc<<18) + (Tchr<<16) + REFCNT - -#define BANKSIZE_CONF (BK76MAP) + (SCLK_EN<<4) + (SCKE_EN<<5) + (BURST_EN<<7) -#define B6_MRSR (CL<<4) -#define B7_MRSR (CL<<4) - -#endif diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile deleted file mode 100644 index 6dfd18e..0000000 --- a/board/mx1ads/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# -# board/mx1ads/Makefile -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (c) Copyright 2004 -# Techware Information Technology, Inc. -# http://www.techware.com.tw/ -# -# Ming-Len Wu <minglen_wu@techware.com.tw> -# -# SPDX-License-Identifier: GPL-2.0+ - -obj-y := mx1ads.o syncflash.o -obj-y += lowlevel_init.o diff --git a/board/mx1ads/lowlevel_init.S b/board/mx1ads/lowlevel_init.S deleted file mode 100644 index d1e472a..0000000 --- a/board/mx1ads/lowlevel_init.S +++ /dev/null @@ -1,68 +0,0 @@ -/* - * board/mx1ads/lowlevel_init.S - * - * (c) Copyright 2004 - * Techware Information Technology, Inc. - * http://www.techware.com.tw/ - * - * Ming-Len Wu <minglen_wu@techware.com.tw> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <version.h> - -#define SDCTL0 0x221000 -#define SDCTL1 0x221004 - - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - -.globl lowlevel_init -lowlevel_init: -/* memory controller init */ - - ldr r1, =SDCTL0 - -/* Set Precharge Command */ - - ldr r3, =0x92120200 -/* ldr r3, =0x92120251 -*/ - str r3, [r1] - -/* Issue Precharge All Commad */ - ldr r3, =0x8200000 - ldr r2, [r3] - -/* Set AutoRefresh Command */ - ldr r3, =0xA2120200 - str r3, [r1] - -/* Issue AutoRefresh Command */ - ldr r3, =0x8000000 - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - -/* Set Mode Register */ - ldr r3, =0xB2120200 - str r3, [r1] - -/* Issue Mode Register Command */ - ldr r3, =0x08111800 /* Mode Register Value */ - ldr r2, [r3] - -/* Set Normal Mode */ - ldr r3, =0x82124200 - str r3, [r1] - -/* everything is fine now */ - mov pc, lr diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c deleted file mode 100644 index 4266048..0000000 --- a/board/mx1ads/mx1ads.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * board/mx1ads/mx1ads.c - * - * (c) Copyright 2004 - * Techware Information Technology, Inc. - * http://www.techware.com.tw/ - * - * Ming-Len Wu <minglen_wu@techware.com.tw> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -/*#include <mc9328.h>*/ -#include <asm/arch/imx-regs.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define FCLK_SPEED 1 - -#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ -#define M_MDIV 0xC3 -#define M_PDIV 0x4 -#define M_SDIV 0x1 -#elif FCLK_SPEED==1 /* Fout = 202.8MHz */ -#define M_MDIV 0xA1 -#define M_PDIV 0x3 -#define M_SDIV 0x1 -#endif - -#define USB_CLOCK 1 - -#if USB_CLOCK==0 -#define U_M_MDIV 0xA1 -#define U_M_PDIV 0x3 -#define U_M_SDIV 0x1 -#elif USB_CLOCK==1 -#define U_M_MDIV 0x48 -#define U_M_PDIV 0x3 -#define U_M_SDIV 0x2 -#endif - -#if 0 - -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - -#endif - -/* - * Miscellaneous platform dependent initialisations - */ - -void SetAsynchMode (void) -{ - __asm__ ("mrc p15,0,r0,c1,c0,0 \n" - "mov r2, #0xC0000000 \n" - "orr r0,r2,r0 \n" "mcr p15,0,r0,c1,c0,0 \n"); -} - -static u32 mc9328sid; - -int board_early_init_f(void) -{ - mc9328sid = SIDR; - - GPCR = 0x000003AB; /* I/O pad driving strength */ - - /* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */ -/* MX1_CS1L = 0x11110601; */ - - MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */ - -/* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and - * BCLK divider to 2 (i.e. BCLK to 48 MHz) - */ - CSCR = 0xAF000403; - - CSCR |= 0x00200000; /* Trigger the restart bit(bit 21) */ - CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */ - -/* setup cs4 for cs8900 ethernet */ - - CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */ - CS4L = 0x00001501; - - GIUS (0) &= 0xFF3FFFFF; - GPR (0) &= 0xFF3FFFFF; - - readl(0x1500000C); - readl(0x1500000C); - - SetAsynchMode (); - - icache_enable (); - dcache_enable (); - -/* set PERCLKs */ - PCDR = 0x00000055; /* set PERCLKS */ - -/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes - * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place - * all sources selected as normal interrupt - */ - -/* MX1_INTTYPEH = 0; - MX1_INTTYPEL = 0; -*/ - return 0; -} - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_MX1ADS; - - gd->bd->bi_boot_params = 0x08000100; /* adress of boot parameters */ - - return 0; -} - -int board_late_init (void) -{ - - setenv ("stdout", "serial"); - setenv ("stderr", "serial"); - - switch (mc9328sid) { - case 0x0005901d: - printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n", - mc9328sid); - break; - case 0x04d4c01d: - printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n", - mc9328sid); - break; - case 0x00d4c01d: - printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n", - mc9328sid); - break; - - default: - printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n", - mc9328sid); - break; - } - return 0; -} - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_CS8900 - rc = cs8900_initialize(0, CONFIG_CS8900_BASE); -#endif - return rc; -} -#endif diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c deleted file mode 100644 index 5d68533..0000000 --- a/board/mx1ads/syncflash.c +++ /dev/null @@ -1,307 +0,0 @@ -/* - * board/mx1ads/syncflash.c - * - * (c) Copyright 2004 - * Techware Information Technology, Inc. - * http://www.techware.com.tw/ - * - * Ming-Len Wu <minglen_wu@techware.com.tw> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -/*#include <mc9328.h>*/ -#include <asm/arch/imx-regs.h> - -typedef unsigned long * p_u32; - -/* 4Mx16x2 IAM=0 CSD1 */ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Following Setting is for CSD1 */ -#define SFCTL 0x00221004 -#define reg_SFCTL __REG(SFCTL) - -#define SYNCFLASH_A10 (0x00100000) - -#define CMD_NORMAL (0x81020300) /* Normal Mode */ -#define CMD_PREC (CMD_NORMAL + 0x10000000) /* Precharge Command */ -#define CMD_AUTO (CMD_NORMAL + 0x20000000) /* Auto Refresh Command */ -#define CMD_LMR (CMD_NORMAL + 0x30000000) /* Load Mode Register Command */ -#define CMD_LCR (CMD_NORMAL + 0x60000000) /* LCR Command */ -#define CMD_PROGRAM (CMD_NORMAL + 0x70000000) - -#define MODE_REG_VAL (CONFIG_SYS_FLASH_BASE+0x0008CC00) /* Cas Latency 3 */ - -/* LCR Command */ -#define LCR_READSTATUS (0x0001C000) /* 0x70 */ -#define LCR_ERASE_CONFIRM (0x00008000) /* 0x20 */ -#define LCR_ERASE_NVMODE (0x0000C000) /* 0x30 */ -#define LCR_PROG_NVMODE (0x00028000) /* 0xA0 */ -#define LCR_SR_CLEAR (0x00014000) /* 0x50 */ - -/* Get Status register */ -u32 SF_SR(void) { - u32 tmp; - - reg_SFCTL = CMD_PROGRAM; - tmp = __REG(CONFIG_SYS_FLASH_BASE); - - reg_SFCTL = CMD_NORMAL; - - reg_SFCTL = CMD_LCR; /* Activate LCR Mode */ - __REG(CONFIG_SYS_FLASH_BASE + LCR_SR_CLEAR); - - return tmp; -} - -/* check if SyncFlash is ready */ -u8 SF_Ready(void) { - u32 tmp; - - tmp = SF_SR(); - - if ((tmp & 0x00800000) && (tmp & 0x001C0000)) { - printf ("SyncFlash Error code %08x\n",tmp); - }; - - if ((tmp & 0x00000080) && (tmp & 0x0000001C)) { - printf ("SyncFlash Error code %08x\n",tmp); - }; - - if (tmp == 0x00800080) /* Test Bit 7 of SR */ - return 1; - else - return 0; -} - -/* Issue the precharge all command */ -void SF_PrechargeAll(void) { - - /* Set Precharge Command */ - reg_SFCTL = CMD_PREC; - /* Issue Precharge All Command */ - __REG(CONFIG_SYS_FLASH_BASE + SYNCFLASH_A10); -} - -/* set SyncFlash to normal mode */ -void SF_Normal(void) { - - SF_PrechargeAll(); - - reg_SFCTL = CMD_NORMAL; -} - -/* Erase SyncFlash */ -void SF_Erase(u32 RowAddress) { - - reg_SFCTL = CMD_NORMAL; - __REG(RowAddress); - - reg_SFCTL = CMD_PREC; - __REG(RowAddress); - - reg_SFCTL = CMD_LCR; /* Set LCR mode */ - __REG(RowAddress + LCR_ERASE_CONFIRM) = 0; /* Issue Erase Setup Command */ - - reg_SFCTL = CMD_NORMAL; /* return to Normal mode */ - __REG(RowAddress) = 0xD0D0D0D0; /* Confirm */ - - while(!SF_Ready()); -} - -void SF_NvmodeErase(void) { - SF_PrechargeAll(); - - reg_SFCTL = CMD_LCR; /* Set to LCR mode */ - __REG(CONFIG_SYS_FLASH_BASE + LCR_ERASE_NVMODE) = 0; /* Issue Erase Nvmode Reg Command */ - - reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */ - __REG(CONFIG_SYS_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0; /* Confirm */ - - while(!SF_Ready()); -} - -void SF_NvmodeWrite(void) { - SF_PrechargeAll(); - - reg_SFCTL = CMD_LCR; /* Set to LCR mode */ - __REG(CONFIG_SYS_FLASH_BASE+LCR_PROG_NVMODE) = 0; /* Issue Program Nvmode reg command */ - - reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */ - __REG(CONFIG_SYS_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; /* Confirm not needed */ -} - -/****************************************************************************************/ - -ulong flash_init(void) { - int i, j; - -/* Turn on CSD1 for negating RESETSF of SyncFLash */ - - reg_SFCTL |= 0x80000000; /* enable CSD1 for SyncFlash */ - udelay(200); - - reg_SFCTL = CMD_LMR; /* Set Load Mode Register Command */ - __REG(MODE_REG_VAL); /* Issue Load Mode Register Command */ - - SF_Normal(); - - i = 0; - - flash_info[i].flash_id = FLASH_MAN_MT | FLASH_MT28S4M16LC; - - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - - memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - - for (j = 0; j < flash_info[i].sector_count; j++) { - flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE + j * 0x00100000; - } - - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, - &flash_info[0]); - - return FLASH_BANK_SIZE; -} - -void flash_print_info (flash_info_t *info) { - - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (FLASH_MAN_MT & FLASH_VENDMASK): - printf("Micron: "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (FLASH_MT28S4M16LC & FLASH_TYPEMASK): - printf("2x FLASH_MT28S4M16LC (16MB Total)\n"); - break; - default: - printf("Unknown Chip Type\n"); - return; - break; - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses: "); - - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) - printf ("\n "); - - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - - printf ("\n"); -} - -/*-----------------------------------------------------------------------*/ - -int flash_erase (flash_info_t *info, int s_first, int s_last) { - int iflag, cflag, prot, sect; - int rc = ERR_OK; - -/* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) - return ERR_INVAL; - - if ((info->flash_id & FLASH_VENDMASK) != (FLASH_MAN_MT & FLASH_VENDMASK)) - return ERR_UNKNOWN_FLASH_VENDOR; - - prot = 0; - - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) - prot++; - } - - if (prot) { - printf("protected!\n"); - return ERR_PROTECTED; - } -/* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - cflag = icache_status(); - icache_disable(); - iflag = disable_interrupts(); - -/* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc(); sect++) { - - printf("Erasing sector %2d ... ", sect); - -/* arm simple, non interrupt dependent timer */ - - get_timer(0); - - SF_NvmodeErase(); - SF_NvmodeWrite(); - - SF_Erase(CONFIG_SYS_FLASH_BASE + (0x0100000 * sect)); - SF_Normal(); - - printf("ok.\n"); - } - - if (ctrlc()) - printf("User Interrupt!\n"); - - if (iflag) - enable_interrupts(); - - if (cflag) - icache_enable(); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) { - int i; - - for(i = 0; i < cnt; i += 4) { - - SF_PrechargeAll(); - - reg_SFCTL = CMD_PROGRAM; /* Enter SyncFlash Program mode */ - __REG(addr + i) = __REG((u32)src + i); - - while(!SF_Ready()); - } - - SF_Normal(); - - return ERR_OK; -} diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index 0043bc6..72e9bb2 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -257,15 +257,9 @@ static void setup_display(void) int board_eth_init(bd_t *bis) { - int ret; - setup_iomux_enet(); - ret = cpu_eth_init(bis); - if (ret) - printf("FEC MXC: %s:failed\n", __func__); - - return ret; + return cpu_eth_init(bis); } int board_early_init_f(void) @@ -65,11 +65,9 @@ Active arm arm920t at91 BuS eb_cpux9k2 Active arm arm920t at91 BuS eb_cpux9k2 eb_cpux9k2_ram eb_cpux9k2:RAMBOOT Jens Scharsig <esw@bus-elektronik.de> Active arm arm920t at91 eukrea cpuat91 cpuat91 cpuat91 Eric Benard <eric@eukrea.com> Active arm arm920t at91 eukrea cpuat91 cpuat91_ram cpuat91:RAMBOOT Eric Benard <eric@eukrea.com> -Active arm arm920t imx - - mx1ads - - Active arm arm920t imx - - scb9328 - Torsten Koschorrek <koschorrek@synertronixx.de> Active arm arm920t ks8695 - - cm4008 - Greg Ungerer <greg.ungerer@opengear.com> Active arm arm920t ks8695 - - cm41xx - - -Active arm arm920t s3c24x0 friendlyarm mini2440 mini2440 - Gabriel Huau <contact@huau-gabriel.fr> Active arm arm920t s3c24x0 mpl vcma9 VCMA9 - David Müller <d.mueller@elsoft.ch> Active arm arm920t s3c24x0 samsung - smdk2410 - David Müller <d.mueller@elsoft.ch> Active arm arm926ejs - armltd integrator integratorap_cm926ejs integratorap:CM926EJ_S Linus Walleij <linus.walleij@linaro.org> diff --git a/doc/README.mini2440 b/doc/README.mini2440 deleted file mode 100644 index 311ca52..0000000 --- a/doc/README.mini2440 +++ /dev/null @@ -1,28 +0,0 @@ -U-Boot for FriendlyARM Mini2440 (s3c2440) - -This file contains information for the port of U-Boot to FriendlyARM -mini2440 - -All information about the board can be found on : -http://www.friendlyarm.net/products/mini2440 - -To build u-boot : ./MAKEALL mini2440 - -Overview : --------- -FriendlyARM Mini 2440 SBC (Single-Board Computer) with 400 MHz Samsung S3C2440 -ARM9 processor. The board measures 100 x 100 mm, ideal for learning about ARM9 -systems. It's a low cost board. - -Boot Methods : ------------- -Mini2440 can boot from NOR or NAND. - -Build : ------ -./MAKEALL mini2440 - -or - -make mini2440_config -make diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 604de0c..2aed855 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,8 +11,10 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -omap730p2 arm arm926ejs - 2013-11-11 -pn62 powerpc mpc824x - 2013-11-11 Wolfgang Grandegger <wg@grandegger.com> +mx1ads arm arm920t - 2014-01-13 +mini2440 arm arm920t - 2014-01-13 Gabriel Huau <contact@huau-gabriel.fr> +omap730p2 arm arm926ejs 79c5c08d 2013-11-11 +pn62 powerpc mpc824x 649acfe1 2013-11-11 Wolfgang Grandegger <wg@grandegger.com> pdnb3 arm ixp 304db0b 2013-09-24 Stefan Roese <sr@denx.de> scpu arm ixp 304db0b 2013-09-24 Stefan Roese <sr@denx.de> omap1510inn arm arm925t 0610a16 2013-09-23 Kshitij Gupta <kshitij@ti.com> diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h deleted file mode 100644 index 12667c5..0000000 --- a/include/configs/mx1ads.h +++ /dev/null @@ -1,163 +0,0 @@ -/* - * include/configs/mx1ads.h - * - * (c) Copyright 2004 - * Techware Information Technology, Inc. - * http://www.techware.com.tw/ - * - * Ming-Len Wu <minglen_wu@techware.com.tw> - * - * This is the Configuration setting for Motorola MX1ADS board - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_IMX 1 /* It's a Motorola MC9328 SoC */ -#define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */ - -/* - * Select serial console configuration - */ -#define CONFIG_IMX_SERIAL -#define CONFIG_IMX_SERIAL1 /* internal uart 1 */ -/* #define _CONFIG_UART2 */ /* internal uart 2 */ -/* #define CONFIG_SILENT_CONSOLE */ /* use this to disable output */ - -#define CONFIG_BOARD_LATE_INIT -#define USE_920T_MMU 1 - -#if 0 -#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */ -#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */ -#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */ -#endif - -/* - * Size of malloc() pool - */ - -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * CS8900 Ethernet drivers - */ -#define CONFIG_CS8900 /* we have a CS8900 on-board */ -#define CONFIG_CS8900_BASE 0x15000300 -#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */ - -/* - * select serial console configuration - */ - -/* #define CONFIG_UART1 */ -/* #define CONFIG_UART2 1 */ - -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_ELF - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "root=/dev/msdk mem=48M" -#define CONFIG_BOOTFILE "mx1ads" -#define CONFIG_BOOTCOMMAND "tftp; bootm" - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#endif - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "MX1ADS$ " /* Monitor Command Prompt */ -#else -#define CONFIG_SYS_PROMPT "MX1ADS=> " /* Monitor Command Prompt */ -#endif - -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x09000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x08800000 /* default load address */ -#define CONFIG_SYS_HZ 3686400 -#define CONFIG_SYS_CPUSPEED 0x141 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ - -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ -#define PHYS_SDRAM_1 0x08000000 /* SDRAM on CSD0 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ - -#define CONFIG_SYS_TEXT_BASE 0x10000000 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x00300000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_GBL_DATA_OFFSET) - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* 1 bank of SyncFlash */ -#define CONFIG_SYS_FLASH_BASE 0x0C000000 /* SyncFlash on CSD1 */ -#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CONFIG_SYNCFLASH 1 -#define PHYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_MAX_FLASH_SECT (16) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x00ff8000) - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x04000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x100000 - -/*----------------------------------------------------------------------- - * Enable passing ATAGS - */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 - -#define CONFIG_SYS_CLK_FREQ 16780000 -#define CONFIG_SYSPLL_CLK_FREQ 16000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 21c848f..5ee7fa5 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -95,6 +95,28 @@ #define CONFIG_LOADADDR 0x12000000 #define CONFIG_SYS_TEXT_BASE 0x17800000 +#ifdef CONFIG_SUPPORT_EMMC_BOOT +#define EMMC_ENV \ + "emmcdev=2\0" \ + "update_emmc_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ + "if mmc dev ${emmcdev} && " \ + "mmc open ${emmcdev} 1; then " \ + "setexpr fw_sz ${filesize} / 0x200; " \ + "setexpr fw_sz ${fw_sz} + 1; " \ + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ + "mmc close ${emmcdev} 1; " \ + "fi; " \ + "fi\0" +#else +#define EMMC_ENV "" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "uimage=uImage\0" \ @@ -121,6 +143,7 @@ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ "fi; " \ "fi\0" \ + EMMC_ENV \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 3229bc7..4919f53 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -23,6 +23,8 @@ #endif #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ + #include "mx6sabre_common.h" #define CONFIG_SYS_FSL_USDHC_NUM 3 diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 7abad08..b29f78c 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -11,6 +11,7 @@ #include <asm/arch/imx-regs.h> #include <asm/sizes.h> +#include "mx6_common.h" #define CONFIG_MX6 #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index ae8480d..3488472 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -108,7 +108,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ - "uimage=uImage\0" \ + "image=zImage\0" \ "console=ttymxc0\0" \ "splashpos=m,m\0" \ "fdt_high=0xffffffff\0" \ @@ -140,22 +140,22 @@ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ - "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ "if run loadfdt; then " \ - "bootm ${loadaddr} - ${fdt_addr}; " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ "else " \ "if test ${boot_fdt} = try; then " \ - "bootm; " \ + "bootz; " \ "else " \ "echo WARN: Cannot load the DT; " \ "fi; " \ "fi; " \ "else " \ - "bootm; " \ + "bootz; " \ "fi;\0" \ "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs " \ @@ -167,19 +167,19 @@ "else " \ "setenv get_cmd tftp; " \ "fi; " \ - "${get_cmd} ${uimage}; " \ + "${get_cmd} ${image}; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "bootm ${loadaddr} - ${fdt_addr}; " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ "else " \ "if test ${boot_fdt} = try; then " \ - "bootm; " \ + "bootz; " \ "else " \ "echo WARN: Cannot load the DT; " \ "fi; " \ "fi; " \ "else " \ - "bootm; " \ + "bootz; " \ "fi;\0" #define CONFIG_BOOTCOMMAND \ @@ -187,7 +187,7 @@ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ - "if run loaduimage; then " \ + "if run loadimage; then " \ "run mmcboot; " \ "else run netboot; " \ "fi; " \ diff --git a/spl/Makefile b/spl/Makefile index 003956e..5e5472d 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -165,7 +165,7 @@ $(obj)$(BOARD)-spl.bin: $(obj)u-boot-spl.bin endif $(obj)$(SPL_BIN).bin: $(obj)$(SPL_BIN) - $(OBJCOPY) $(OBJCFLAGS) -O binary $< $@ + $(OBJCOPY) $(OBJCFLAGS) $(SPL_OBJCFLAGS) -O binary $< $@ GEN_UBOOT = \ cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $(__START) \ |