diff options
737 files changed, 41677 insertions, 3417 deletions
@@ -36,7 +36,7 @@ endef generic-offsets-file := include/generated/generic-asm-offsets.h always := $(generic-offsets-file) -targets := $(generic-offsets-file) lib/asm-offsets.s +targets := lib/asm-offsets.s # We use internal kbuild rules to avoid the "is up to date" message from make lib/asm-offsets.s: lib/asm-offsets.c FORCE @@ -55,7 +55,6 @@ offsets-file := include/generated/asm-offsets.h endif always += $(offsets-file) -targets += $(offsets-file) targets += arch/$(ARCH)/lib/asm-offsets.s CFLAGS_asm-offsets.o := -DDO_DEPS_ONLY @@ -178,7 +178,7 @@ config SYS_EXTRA_OPTIONS new boards should not use this option. config SYS_TEXT_BASE - depends on SPARC || ARC || X86 || ARCH_UNIPHIER + depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP hex "Text Base" help TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture @@ -10,9 +10,10 @@ NAME = # Comments in this file are targeted only to the developer, do not # expect to learn how to build the kernel reading this file. -# Do not use make's built-in rules and variables -# (this increases performance and avoids hard-to-debug behaviour); -MAKEFLAGS += -rR +# o Do not use make's built-in rules and variables +# (this increases performance and avoids hard-to-debug behaviour); +# o Look for make include files relative to root of kernel src +MAKEFLAGS += -rR --include-dir=$(CURDIR) # Avoid funny character set dependencies unexport LC_ALL @@ -319,12 +320,9 @@ endif export KBUILD_MODULES KBUILD_BUILTIN export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD -# Look for make include files relative to root of kernel src -MAKEFLAGS += --include-dir=$(srctree) - # We need some generic definitions (do not try to remake the file). -$(srctree)/scripts/Kbuild.include: ; -include $(srctree)/scripts/Kbuild.include +scripts/Kbuild.include: ; +include scripts/Kbuild.include # Make variables (CC, etc...) @@ -437,7 +435,7 @@ endif ifeq ($(KBUILD_EXTMOD),) ifneq ($(filter config %config,$(MAKECMDGOALS)),) config-targets := 1 - ifneq ($(filter-out config %config,$(MAKECMDGOALS)),) + ifneq ($(words $(MAKECMDGOALS)),1) mixed-targets := 1 endif endif @@ -518,8 +516,8 @@ ifneq ($(wildcard include/config/auto.conf),) autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \ include/config/auto.conf) ifeq ($(autoconf_is_old),) -include $(srctree)/config.mk -include $(srctree)/arch/$(ARCH)/Makefile +include config.mk +include arch/$(ARCH)/Makefile endif endif endif @@ -595,7 +593,7 @@ endif export CONFIG_SYS_TEXT_BASE -include $(srctree)/scripts/Makefile.extrawarn +include scripts/Makefile.extrawarn # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments KBUILD_CPPFLAGS += $(KCPPFLAGS) @@ -738,8 +736,12 @@ ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin ifeq ($(CONFIG_SPL_FSL_PBL),y) ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin else +ifneq ($(CONFIG_SECURE_BOOT), y) +# For Secure Boot The Image needs to be signed and Header must also +# be included. So The image has to be built explicitly ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl endif +endif ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin @@ -887,7 +889,7 @@ MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ - -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) + -T kwbimage -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage @@ -1232,9 +1234,10 @@ define filechk_version.h endef define filechk_timestamp.h - (LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \ - LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \ - LC_ALL=C date +'#define U_BOOT_TZ "%z"') + (SOURCE_DATE="$${SOURCE_DATE_EPOCH:+@$$SOURCE_DATE_EPOCH}"; \ + LC_ALL=C date -u -d "$${SOURCE_DATE:-now}" +'#define U_BOOT_DATE "%b %d %C%y"'; \ + LC_ALL=C date -u -d "$${SOURCE_DATE:-now}" +'#define U_BOOT_TIME "%T"'; \ + LC_ALL=C date -u -d "$${SOURCE_DATE:-now}" +'#define U_BOOT_TZ "%z"' ) endef $(version_h): include/config/uboot.release FORCE @@ -1244,12 +1247,6 @@ $(timestamp_h): $(srctree)/Makefile FORCE $(call filechk,timestamp.h) # --------------------------------------------------------------------------- - -PHONY += depend dep -depend dep: - @echo '*** Warning: make $@ is unnecessary now.' - -# --------------------------------------------------------------------------- quiet_cmd_cpp_lds = LDS $@ cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $< @@ -1259,7 +1256,7 @@ u-boot.lds: $(LDSCRIPT) prepare FORCE spl/u-boot-spl.bin: spl/u-boot-spl @: -spl/u-boot-spl: tools prepare +spl/u-boot-spl: tools prepare $(if $(CONFIG_OF_SEPARATE),dts/dt.dtb) $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all spl/sunxi-spl.bin: spl/u-boot-spl @@ -1549,11 +1546,6 @@ ifneq ($(cmd_files),) include $(cmd_files) endif -# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir -# Usage: -# $(Q)$(MAKE) $(clean)=dir -clean := -f $(srctree)/scripts/Makefile.clean obj - endif # skip-makefile PHONY += FORCE @@ -1671,7 +1671,7 @@ The following options need to be configured: key for the Replay Protection Memory Block partition in eMMC. - USB Device Firmware Update (DFU) class support: - CONFIG_DFU_FUNCTION + CONFIG_USB_FUNCTION_DFU This enables the USB portion of the DFU USB class CONFIG_CMD_DFU @@ -1716,6 +1716,9 @@ The following options need to be configured: sending again an USB request to the device. - USB Device Android Fastboot support: + CONFIG_USB_FUNCTION_FASTBOOT + This enables the USB part of the fastboot gadget + CONFIG_CMD_FASTBOOT This enables the command "fastboot" which enables the Android fastboot mode for the platform's USB device. Fastboot is a USB @@ -1727,12 +1730,12 @@ The following options need to be configured: This enables support for booting images which use the Android image format header. - CONFIG_USB_FASTBOOT_BUF_ADDR + CONFIG_FASTBOOT_BUF_ADDR The fastboot protocol requires a large memory buffer for downloads. Define this to the starting RAM address to use for downloaded images. - CONFIG_USB_FASTBOOT_BUF_SIZE + CONFIG_FASTBOOT_BUF_SIZE The fastboot protocol requires a large memory buffer for downloads. This buffer should be as large as possible for a platform. Define this to the size available RAM for fastboot. @@ -5063,6 +5066,33 @@ within that device. normal addressable memory via the LBC. CONFIG_SYS_LS_MC_FW_ADDR is the virtual address in NOR flash. +Freescale Layerscape Debug Server Support: +------------------------------------------- +The Freescale Layerscape Debug Server Support supports the loading of +"Debug Server firmware" and triggering SP boot-rom. +This firmware often needs to be loaded during U-Boot booting. + +- CONFIG_FSL_DEBUG_SERVER + Enable the Debug Server for Layerscape SoCs. + +- CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE + Define minimum DDR size required for debug server image + +- CONFIG_SYS_MEM_TOP_HIDE_MIN + Define minimum DDR size to be hided from top of the DDR memory + +Reproducible builds +------------------- + +In order to achieve reproducible builds, timestamps used in the U-Boot build +process have to be set to a fixed value. + +This is done using the SOURCE_DATE_EPOCH environment variable. +SOURCE_DATE_EPOCH is to be set on the build host's shell, not as a configuration +option for U-Boot or an environment variable in U-Boot. + +SOURCE_DATE_EPOCH should be set to a number of seconds since the epoch, in UTC. + Building the Software: ====================== diff --git a/arch/Kconfig b/arch/Kconfig index afa1d6c..e952bb1 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -1,3 +1,6 @@ +config CREATE_ARCH_SYMLINK + bool + config HAVE_GENERIC_BOARD bool @@ -18,12 +21,14 @@ config ARC config ARM bool "ARM architecture" + select CREATE_ARCH_SYMLINK select HAVE_PRIVATE_LIBGCC if !ARM64 select HAVE_GENERIC_BOARD select SUPPORT_OF_CONTROL config AVR32 bool "AVR32 architecture" + select CREATE_ARCH_SYMLINK select HAVE_GENERIC_BOARD select SYS_GENERIC_BOARD @@ -84,9 +89,11 @@ config SH config SPARC bool "SPARC architecture" + select CREATE_ARCH_SYMLINK config X86 bool "x86 architecture" + select CREATE_ARCH_SYMLINK select HAVE_PRIVATE_LIBGCC select HAVE_GENERIC_BOARD select SYS_GENERIC_BOARD diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dc3c9ae..32fa2dd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -642,11 +642,17 @@ config ARCH_SOCFPGA config ARCH_SUNXI bool "Support sunxi (Allwinner) SoCs" + select CMD_USB select DM select DM_GPIO + select DM_ETH + select DM_SERIAL + select DM_USB select OF_CONTROL select OF_SEPARATE select SPL_DISABLE_OF_CONTROL + select USB + select USB_STORAGE config TARGET_SNOWBALL bool "Support snowball" @@ -674,23 +680,12 @@ config ARCH_ZYNQ select DM_SPI select DM_SPI_FLASH -config TARGET_XILINX_ZYNQMP +config ARCH_ZYNQMP bool "Support Xilinx ZynqMP Platform" select ARM64 config TEGRA bool "NVIDIA Tegra" - select SUPPORT_SPL - select SPL - select OF_CONTROL - select SPL_DISABLE_OF_CONTROL - select CPU_V7 - select DM - select DM_SPI_FLASH - select DM_SERIAL - select DM_I2C - select DM_SPI - select DM_GPIO config TARGET_VEXPRESS64_AEMV8A bool "Support vexpress_aemv8a" @@ -867,6 +862,8 @@ source "arch/arm/mach-zynq/Kconfig" source "arch/arm/cpu/armv7/Kconfig" +source "arch/arm/cpu/armv8/zynqmp/Kconfig" + source "arch/arm/cpu/armv8/Kconfig" source "arch/arm/imx-common/Kconfig" @@ -985,7 +982,6 @@ source "board/warp/Kconfig" source "board/woodburn/Kconfig" source "board/work-microwave/work_92105/Kconfig" source "board/xaeniax/Kconfig" -source "board/xilinx/zynqmp/Kconfig" source "board/zipitz2/Kconfig" source "arch/arm/Kconfig.debug" diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c index 781d83f..52a6824 100644 --- a/arch/arm/cpu/armv7/am33xx/sys_info.c +++ b/arch/arm/cpu/armv7/am33xx/sys_info.c @@ -51,15 +51,6 @@ u32 get_cpu_type(void) } /** - * get_board_rev() - setup to pass kernel board revision information - * returns: 0 for the ATAG REVISION tag value. - */ -u32 __weak get_board_rev(void) -{ - return 0; -} - -/** * get_device_type(): tell if GP/HS/EMU/TST */ u32 get_device_type(void) diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile index 2e6a207..2d55782 100644 --- a/arch/arm/cpu/armv7/ls102xa/Makefile +++ b/arch/arm/cpu/armv7/ls102xa/Makefile @@ -12,3 +12,7 @@ obj-y += fsl_epu.o obj-$(CONFIG_OF_LIBFDT) += fdt.o obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o obj-$(CONFIG_SPL) += spl.o + +ifdef CONFIG_ARMV7_PSCI +obj-y += psci.o +endif diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c index 71a1753..e01d911 100644 --- a/arch/arm/cpu/armv7/ls102xa/fdt.c +++ b/arch/arm/cpu/armv7/ls102xa/fdt.c @@ -29,29 +29,30 @@ void ft_fixup_enet_phy_connect_type(void *fdt) char phy[16]; int phy_node; int i = 0; - int enet_id = 0; uint32_t ph; while ((dev = eth_get_dev_by_index(i++)) != NULL) { - if (strstr(dev->name, "eTSEC1")) - enet_id = 0; - else if (strstr(dev->name, "eTSEC2")) - enet_id = 1; - else if (strstr(dev->name, "eTSEC3")) - enet_id = 2; - else + if (strstr(dev->name, "eTSEC1")) { + strcpy(enet, "ethernet0"); + strcpy(phy, "enet0_rgmii_phy"); + } else if (strstr(dev->name, "eTSEC2")) { + strcpy(enet, "ethernet1"); + strcpy(phy, "enet1_rgmii_phy"); + } else if (strstr(dev->name, "eTSEC3")) { + strcpy(enet, "ethernet2"); + strcpy(phy, "enet2_rgmii_phy"); + } else { continue; + } priv = dev->priv; if (priv->flags & TSEC_SGMII) continue; - sprintf(enet, "ethernet%d", enet_id); enet_path = fdt_get_alias(fdt, enet); if (!enet_path) continue; - sprintf(phy, "enet%d_rgmii_phy", enet_id); phy_path = fdt_get_alias(fdt, phy); if (!phy_path) continue; diff --git a/arch/arm/cpu/armv7/ls102xa/psci.S b/arch/arm/cpu/armv7/ls102xa/psci.S new file mode 100644 index 0000000..cf5cd48 --- /dev/null +++ b/arch/arm/cpu/armv7/ls102xa/psci.S @@ -0,0 +1,126 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * Author: Wang Dongsheng <dongsheng.wang@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <linux/linkage.h> + +#include <asm/armv7.h> +#include <asm/arch-armv7/generictimer.h> +#include <asm/psci.h> + +#define SCFG_CORE0_SFT_RST 0x130 +#define SCFG_CORESRENCR 0x204 + +#define DCFG_CCSR_BRR 0x0E4 +#define DCFG_CCSR_SCRATCHRW1 0x200 + + .pushsection ._secure.text, "ax" + + .arch_extension sec + +#define ONE_MS (GENERIC_TIMER_CLK / 1000) +#define RESET_WAIT (30 * ONE_MS) + + @ r1 = target CPU + @ r2 = target PC +.globl psci_cpu_on +psci_cpu_on: + push {lr} + + @ Clear and Get the correct CPU number + @ r1 = 0xf01 + and r1, r1, #0xff + + mov r0, r1 + bl psci_get_cpu_stack_top + str r2, [r0] + dsb + + @ Get DCFG base address + movw r4, #(CONFIG_SYS_FSL_GUTS_ADDR & 0xffff) + movt r4, #(CONFIG_SYS_FSL_GUTS_ADDR >> 16) + + @ Detect target CPU state + ldr r2, [r4, #DCFG_CCSR_BRR] + rev r2, r2 + lsr r2, r2, r1 + ands r2, r2, #1 + beq holdoff_release + + @ Reset target CPU + @ Get SCFG base address + movw r0, #(CONFIG_SYS_FSL_SCFG_ADDR & 0xffff) + movt r0, #(CONFIG_SYS_FSL_SCFG_ADDR >> 16) + + @ Enable CORE Soft Reset + movw r5, #0 + movt r5, #(1 << 15) + rev r5, r5 + str r5, [r0, #SCFG_CORESRENCR] + + @ Get CPUx offset register + mov r6, #0x4 + mul r6, r6, r1 + add r2, r0, r6 + + @ Do reset on target CPU + movw r5, #0 + movt r5, #(1 << 15) + rev r5, r5 + str r5, [r2, #SCFG_CORE0_SFT_RST] + + @ Wait target CPU up + timer_wait r2, RESET_WAIT + + @ Disable CORE soft reset + mov r5, #0 + str r5, [r0, #SCFG_CORESRENCR] + +holdoff_release: + @ Release on target CPU + ldr r2, [r4, #DCFG_CCSR_BRR] + mov r6, #1 + lsl r6, r6, r1 @ 32 bytes per CPU + + rev r6, r6 + orr r2, r2, r6 + str r2, [r4, #DCFG_CCSR_BRR] + + @ Set secondary boot entry + ldr r6, =psci_cpu_entry + rev r6, r6 + str r6, [r4, #DCFG_CCSR_SCRATCHRW1] + + isb + dsb + + @ Return + mov r0, #ARM_PSCI_RET_SUCCESS + + pop {lr} + bx lr + +.globl psci_cpu_off +psci_cpu_off: + bl psci_cpu_off_common + +1: wfi + b 1b + +.globl psci_arch_init +psci_arch_init: + mov r6, lr + + bl psci_get_cpu_id + bl psci_get_cpu_stack_top + mov sp, r0 + + bx r6 + + .globl psci_text_end +psci_text_end: + .popsection diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index f3725b2..464a5d1 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -26,9 +26,7 @@ ifeq ($(CONFIG_SYS_DCACHE_OFF),) obj-y += omap-cache.o endif -ifeq ($(CONFIG_OMAP34XX),) obj-y += boot-common.o -endif obj-y += lowlevel_init.o obj-y += mem-common.o diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index bbc6bed..5ec46fa 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -17,27 +17,34 @@ #include <asm/arch/sys_proto.h> #include <watchdog.h> #include <scsi.h> +#include <i2c.h> DECLARE_GLOBAL_DATA_PTR; +__weak u32 omap_sys_boot_device(void) +{ + return BOOT_DEVICE_NONE; +} + void save_omap_boot_params(void) { - u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); - u8 boot_device; - u32 dev_desc, dev_data; + u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); + struct omap_boot_parameters *omap_boot_params; + u32 boot_device; + u32 boot_mode; - if ((rom_params < NON_SECURE_SRAM_START) || - (rom_params > NON_SECURE_SRAM_END)) + if ((boot_params < NON_SECURE_SRAM_START) || + (boot_params > NON_SECURE_SRAM_END)) return; - /* - * rom_params can be type casted to omap_boot_parameters and - * used. But it not correct to assume that romcode structure - * encoding would be same as u-boot. So use the defined offsets. - */ - boot_device = *((u8 *)(rom_params + BOOT_DEVICE_OFFSET)); + omap_boot_params = (struct omap_boot_parameters *)boot_params; + + boot_device = omap_boot_params->boot_device; + boot_mode = MMCSD_MODE_UNDEFINED; + + /* Boot device */ -#if defined(BOOT_DEVICE_NAND_I2C) +#ifdef BOOT_DEVICE_NAND_I2C /* * Re-map NAND&I2C boot-device to the "normal" NAND boot-device. * Otherwise the SPL boot IF can't handle this device correctly. @@ -47,61 +54,109 @@ void save_omap_boot_params(void) if (boot_device == BOOT_DEVICE_NAND_I2C) boot_device = BOOT_DEVICE_NAND; #endif - gd->arch.omap_boot_params.omap_bootdevice = boot_device; +#ifdef BOOT_DEVICE_QSPI_4 + /* + * We get different values for QSPI_1 and QSPI_4 being used, but + * don't actually care about this difference. Rather than + * mangle the later code, if we're coming in as QSPI_4 just + * change to the QSPI_1 value. + */ + if (boot_device == BOOT_DEVICE_QSPI_4) + boot_device = BOOT_DEVICE_SPI; +#endif +#if (defined(BOOT_DEVICE_UART) && !defined(CONFIG_SPL_YMODEM_SUPPORT)) || \ + (defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_SUPPORT)) || \ + (defined(BOOT_DEVICE_USBETH) && !defined(CONFIG_SPL_USBETH_SUPPORT)) + /* + * When booting from peripheral booting, the boot device is not usable + * as-is (unless there is support for it), so the boot device is instead + * figured out using the SYS_BOOT pins. + */ + switch (boot_device) { +#ifdef BOOT_DEVICE_UART + case BOOT_DEVICE_UART: +#endif +#ifdef BOOT_DEVICE_USB + case BOOT_DEVICE_USB: +#endif + boot_device = omap_sys_boot_device(); + + /* MMC raw mode will fallback to FS mode. */ + if ((boot_device >= MMC_BOOT_DEVICES_START) && + (boot_device <= MMC_BOOT_DEVICES_END)) + boot_mode = MMCSD_MODE_RAW; - gd->arch.omap_boot_params.ch_flags = - *((u8 *)(rom_params + CH_FLAGS_OFFSET)); + break; + } +#endif + gd->arch.omap_boot_device = boot_device; + + /* Boot mode */ + +#ifdef CONFIG_OMAP34XX if ((boot_device >= MMC_BOOT_DEVICES_START) && (boot_device <= MMC_BOOT_DEVICES_END)) { -#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) && \ - !defined(CONFIG_AM43XX) - if ((omap_hw_init_context() == - OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) { - gd->arch.omap_boot_params.omap_bootmode = - *((u8 *)(rom_params + BOOT_MODE_OFFSET)); - } else -#endif - { - dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET)); - dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET)); - gd->arch.omap_boot_params.omap_bootmode = - *((u32 *)(dev_data + BOOT_MODE_OFFSET)); + switch (boot_device) { + case BOOT_DEVICE_MMC1: + boot_mode = MMCSD_MODE_FS; + break; + case BOOT_DEVICE_MMC2: + boot_mode = MMCSD_MODE_RAW; + break; } } - -#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) +#else /* - * We get different values for QSPI_1 and QSPI_4 being used, but - * don't actually care about this difference. Rather than - * mangle the later code, if we're coming in as QSPI_4 just - * change to the QSPI_1 value. + * If the boot device was dynamically changed and doesn't match what + * the bootrom initially booted, we cannot use the boot device + * descriptor to figure out the boot mode. */ - if (gd->arch.omap_boot_params.omap_bootdevice == 11) - gd->arch.omap_boot_params.omap_bootdevice = BOOT_DEVICE_SPI; + if ((boot_device == omap_boot_params->boot_device) && + (boot_device >= MMC_BOOT_DEVICES_START) && + (boot_device <= MMC_BOOT_DEVICES_END)) { + boot_params = omap_boot_params->boot_device_descriptor; + if ((boot_params < NON_SECURE_SRAM_START) || + (boot_params > NON_SECURE_SRAM_END)) + return; + + boot_params = *((u32 *)(boot_params + DEVICE_DATA_OFFSET)); + if ((boot_params < NON_SECURE_SRAM_START) || + (boot_params > NON_SECURE_SRAM_END)) + return; + + boot_mode = *((u32 *)(boot_params + BOOT_MODE_OFFSET)); + + if (boot_mode != MMCSD_MODE_FS && + boot_mode != MMCSD_MODE_RAW) +#ifdef CONFIG_SUPPORT_EMMC_BOOT + boot_mode = MMCSD_MODE_EMMCBOOT; +#else + boot_mode = MMCSD_MODE_UNDEFINED; +#endif + } +#endif + + gd->arch.omap_boot_mode = boot_mode; + +#if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \ + !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX) + + /* CH flags */ + + gd->arch.omap_ch_flags = omap_boot_params->ch_flags; #endif } #ifdef CONFIG_SPL_BUILD u32 spl_boot_device(void) { - return (u32) (gd->arch.omap_boot_params.omap_bootdevice); + return gd->arch.omap_boot_device; } u32 spl_boot_mode(void) { - u32 val = gd->arch.omap_boot_params.omap_bootmode; - - if (val == MMCSD_MODE_RAW) - return MMCSD_MODE_RAW; - else if (val == MMCSD_MODE_FS) - return MMCSD_MODE_FS; - else -#ifdef CONFIG_SUPPORT_EMMC_BOOT - return MMCSD_MODE_EMMCBOOT; -#else - return MMCSD_MODE_UNDEFINED; -#endif + return gd->arch.omap_boot_mode; } void spl_board_init(void) @@ -116,9 +171,12 @@ void spl_board_init(void) /* Prepare console output */ preloader_console_init(); -#ifdef CONFIG_SPL_NAND_SUPPORT +#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) gpmc_init(); #endif +#ifdef CONFIG_SPL_I2C_SUPPORT + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); +#endif #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT) arch_misc_init(); #endif @@ -150,9 +208,11 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) image_entry_noargs_t image_entry = (image_entry_noargs_t) spl_image->entry_point; + u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); + debug("image entry point: 0x%X\n", spl_image->entry_point); /* Pass the saved boot_params from rom code */ - image_entry((u32 *)&gd->arch.omap_boot_params); + image_entry((u32 *)boot_params); } #endif @@ -163,7 +223,7 @@ void arch_preboot_os(void) } #endif -#if defined(CONFIG_CMD_FASTBOOT) && !defined(CONFIG_ENV_IS_NOWHERE) +#if defined(CONFIG_USB_FUNCTION_FASTBOOT) && !defined(CONFIG_ENV_IS_NOWHERE) int fb_set_reboot_flag(void) { printf("Setting reboot to fastboot flag ...\n"); diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 6c8f3bc..80794f9 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -90,7 +90,9 @@ void __weak srcomp_enable(void) */ int arch_cpu_init(void) { +#ifdef CONFIG_SPL save_omap_boot_params(); +#endif return 0; } #endif /* CONFIG_ARCH_CPU_INIT */ diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 746df92..5283135 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -16,8 +16,9 @@ #include <asm/arch/spl.h> #include <linux/linkage.h> -#ifndef CONFIG_OMAP34XX +#ifdef CONFIG_SPL ENTRY(save_boot_params) + ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS str r0, [r1] b save_boot_params_ret diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile index cf86046..b2fce96 100644 --- a/arch/arm/cpu/armv7/omap3/Makefile +++ b/arch/arm/cpu/armv7/omap3/Makefile @@ -8,6 +8,7 @@ obj-y := lowlevel_init.o obj-y += board.o +obj-y += boot.o obj-y += clock.o obj-y += sys_info.o ifdef CONFIG_SPL_BUILD diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index b064c0c..17cb5b7 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -18,7 +18,6 @@ */ #include <common.h> #include <dm.h> -#include <mmc.h> #include <spl.h> #include <asm/io.h> #include <asm/arch/sys_proto.h> @@ -27,8 +26,6 @@ #include <asm/armv7.h> #include <asm/gpio.h> #include <asm/omap_common.h> -#include <asm/arch/mmc_host_def.h> -#include <i2c.h> #include <linux/compiler.h> DECLARE_GLOBAL_DATA_PTR; @@ -73,62 +70,6 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx; #endif -#ifdef CONFIG_SPL_BUILD -/* -* We use static variables because global data is not ready yet. -* Initialized data is available in SPL right from the beginning. -* We would not typically need to save these parameters in regular -* U-Boot. This is needed only in SPL at the moment. -*/ -u32 omap3_boot_device = BOOT_DEVICE_NAND; - -/* auto boot mode detection is not possible for OMAP3 - hard code */ -u32 spl_boot_mode(void) -{ - switch (spl_boot_device()) { - case BOOT_DEVICE_MMC2: - return MMCSD_MODE_RAW; - case BOOT_DEVICE_MMC1: - return MMCSD_MODE_FS; - break; - default: - puts("spl: ERROR: unknown device - can't select boot mode\n"); - hang(); - } -} - -u32 spl_boot_device(void) -{ - return omap3_boot_device; -} - -int board_mmc_init(bd_t *bis) -{ - switch (spl_boot_device()) { - case BOOT_DEVICE_MMC1: - omap_mmc_init(0, 0, 0, -1, -1); - break; - case BOOT_DEVICE_MMC2: - case BOOT_DEVICE_MMC2_2: - omap_mmc_init(1, 0, 0, -1, -1); - break; - } - return 0; -} - -void spl_board_init(void) -{ - preloader_console_init(); -#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) - gpmc_init(); -#endif -#ifdef CONFIG_SPL_I2C_SUPPORT - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); -#endif -} -#endif /* CONFIG_SPL_BUILD */ - - /****************************************************************************** * Routine: secure_unlock * Description: Setup security registers for access diff --git a/arch/arm/cpu/armv7/omap3/boot.c b/arch/arm/cpu/armv7/omap3/boot.c new file mode 100644 index 0000000..66576b2 --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/boot.c @@ -0,0 +1,58 @@ +/* + * OMAP3 boot + * + * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <spl.h> + +static u32 boot_devices[] = { + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_NAND, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_NAND, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_NAND, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_NAND, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_NAND, + BOOT_DEVICE_MMC2_2, +}; + +u32 omap_sys_boot_device(void) +{ + struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; + u32 sys_boot; + + /* Grab the first 5 bits of the status register for SYS_BOOT. */ + sys_boot = readl(&ctrl_base->status) & ((1 << 5) - 1); + + if (sys_boot >= (sizeof(boot_devices) / sizeof(u32))) + return BOOT_DEVICE_NONE; + + return boot_devices[sys_boot]; +} diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index 2497613..1e58772 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -16,16 +16,6 @@ #include <asm/arch/clocks_omap3.h> #include <linux/linkage.h> -#ifdef CONFIG_SPL_BUILD -ENTRY(save_boot_params) - ldr r4, =omap3_boot_device - ldr r5, [r0, #0x4] - and r5, r5, #0xff - str r5, [r4] - b save_boot_params_ret -ENDPROC(save_boot_params) -#endif - /* * Funtion for making PPA HAL API calls in secure devices * Input: diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c index bbb65bb..ab60a03 100644 --- a/arch/arm/cpu/armv7/omap3/sys_info.c +++ b/arch/arm/cpu/armv7/omap3/sys_info.c @@ -196,10 +196,12 @@ u32 get_gpmc0_width(void) * get_board_rev() - setup to pass kernel board revision information * returns:(bit[0-3] sub version, higher bit[7-4] is higher version) *************************************************************************/ +#ifdef CONFIG_REVISION_TAG u32 __weak get_board_rev(void) { return 0x20; } +#endif /******************************************************** * get_base(); get upper addr of current execution diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile index 76a032a..564f1f6 100644 --- a/arch/arm/cpu/armv7/omap4/Makefile +++ b/arch/arm/cpu/armv7/omap4/Makefile @@ -5,6 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # +obj-y += boot.o obj-y += sdram_elpida.o obj-y += hwinit.o obj-y += emif.o diff --git a/arch/arm/cpu/armv7/omap4/boot.c b/arch/arm/cpu/armv7/omap4/boot.c new file mode 100644 index 0000000..4b5aa77 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/boot.c @@ -0,0 +1,60 @@ +/* + * OMAP4 boot + * + * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/omap_common.h> +#include <spl.h> + +static u32 boot_devices[] = { + BOOT_DEVICE_MMC2, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_NAND, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_NAND, + BOOT_DEVICE_NAND, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_NAND, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_XIP, + BOOT_DEVICE_MMC2_2, + BOOT_DEVICE_NAND, + BOOT_DEVICE_MMC2_2, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_MMC2_2, + BOOT_DEVICE_MMC2_2, + BOOT_DEVICE_NONE, + BOOT_DEVICE_XIPWAIT, +}; + +u32 omap_sys_boot_device(void) +{ + u32 sys_boot; + + /* Grab the first 5 bits of the status register for SYS_BOOT. */ + sys_boot = readl((u32 *) (*ctrl)->control_status) & ((1 << 5) - 1); + + if (sys_boot >= (sizeof(boot_devices) / sizeof(u32))) + return BOOT_DEVICE_NONE; + + return boot_devices[sys_boot]; +} diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c index 1ed146b..8698ec7 100644 --- a/arch/arm/cpu/armv7/omap4/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c @@ -279,6 +279,7 @@ struct prcm_regs const omap4_prcm = { }; struct omap_sys_ctrl_regs const omap4_ctrl = { + .control_status = 0x4A0022C4, .control_id_code = 0x4A002204, .control_std_fuse_opp_bgap = 0x4a002260, .control_status = 0x4a0022c4, diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile index e709f14..f2930d5 100644 --- a/arch/arm/cpu/armv7/omap5/Makefile +++ b/arch/arm/cpu/armv7/omap5/Makefile @@ -5,6 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # +obj-y += boot.o obj-y += hwinit.o obj-y += emif.o obj-y += sdram.o diff --git a/arch/arm/cpu/armv7/omap5/boot.c b/arch/arm/cpu/armv7/omap5/boot.c new file mode 100644 index 0000000..583becc --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/boot.c @@ -0,0 +1,46 @@ +/* + * OMAP5 boot + * + * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/omap_common.h> +#include <spl.h> + +static u32 boot_devices[] = { +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) + BOOT_DEVICE_MMC2, + BOOT_DEVICE_NAND, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_SATA, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIP, + BOOT_DEVICE_SPI, + BOOT_DEVICE_SPI, +#else + BOOT_DEVICE_MMC2, + BOOT_DEVICE_NAND, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_SATA, + BOOT_DEVICE_XIP, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_XIPWAIT, +#endif +}; + +u32 omap_sys_boot_device(void) +{ + u32 sys_boot; + + /* Grab the first 4 bits of the status register for SYS_BOOT. */ + sys_boot = readl((u32 *) (*ctrl)->control_status) & ((1 << 4) - 1); + + if (sys_boot >= (sizeof(boot_devices) / sizeof(u32))) + return BOOT_DEVICE_NONE; + + return boot_devices[sys_boot]; +} diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 5f39aa0..f01846e 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -11,6 +11,7 @@ */ #include <common.h> +#include <mmc.h> #include <i2c.h> #include <serial.h> #ifdef CONFIG_SPL_BUILD @@ -22,6 +23,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/sys_proto.h> #include <asm/arch/timer.h> +#include <asm/arch/mmc.h> #include <linux/compiler.h> @@ -121,17 +123,18 @@ void s_init(void) } #ifdef CONFIG_SPL_BUILD +DECLARE_GLOBAL_DATA_PTR; + /* The sunxi internal brom will try to loader external bootloader * from mmc0, nand flash, mmc2. - * Unfortunately we can't check how SPL was loaded so assume - * it's always the first SD/MMC controller */ u32 spl_boot_device(void) { + struct mmc *mmc0, *mmc1; /* - * When booting from the SD card, the "eGON.BT0" signature is expected - * to be found in memory at the address 0x0004 (see the "mksunxiboot" - * tool, which generates this header). + * When booting from the SD card or NAND memory, the "eGON.BT0" + * signature is expected to be found in memory at the address 0x0004 + * (see the "mksunxiboot" tool, which generates this header). * * When booting in the FEL mode over USB, this signature is patched in * memory and replaced with something else by the 'fel' tool. This other @@ -139,15 +142,40 @@ u32 spl_boot_device(void) * valid bootable SD card image (because the BROM would refuse to * execute the SPL in this case). * - * This branch is just making a decision at runtime whether to load - * the main u-boot binary from the SD card (if the "eGON.BT0" signature - * is found) or return to the FEL code in the BROM to wait and receive - * the main u-boot binary over USB. + * This checks for the signature and if it is not found returns to + * the FEL code in the BROM to wait and receive the main u-boot + * binary over USB. If it is found, it determines where SPL was + * read from. */ - if (readl(4) == 0x4E4F4765 && readl(8) == 0x3054422E) /* eGON.BT0 */ - return BOOT_DEVICE_MMC1; - else + if (readl(4) != 0x4E4F4765 || readl(8) != 0x3054422E) /* eGON.BT0 */ return BOOT_DEVICE_BOARD; + + /* The BROM will try to boot from mmc0 first, so try that first. */ + mmc_initialize(gd->bd); + mmc0 = find_mmc_device(0); + if (sunxi_mmc_has_egon_boot_signature(mmc0)) + return BOOT_DEVICE_MMC1; + + /* Fallback to booting NAND if enabled. */ + if (IS_ENABLED(CONFIG_SPL_NAND_SUPPORT)) + return BOOT_DEVICE_NAND; + + if (CONFIG_MMC_SUNXI_SLOT_EXTRA == 2) { + mmc1 = find_mmc_device(1); + if (sunxi_mmc_has_egon_boot_signature(mmc1)) { + /* + * spl_mmc.c: spl_mmc_load_image() is hard-coded to + * use find_mmc_device(0), no matter what we + * return. Swap mmc0 and mmc2 to make this work. + */ + mmc0->block_dev.dev = 1; + mmc1->block_dev.dev = 0; + return BOOT_DEVICE_MMC2; + } + } + + panic("Could not determine boot source\n"); + return -1; /* Never reached */ } /* No confirmation data available in SPL yet. Hardcode bootmode */ diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c index 165c052..c53671a 100644 --- a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c +++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c @@ -26,7 +26,6 @@ #include <asm/arch/clock.h> #include <asm/arch/dram.h> #include <asm/arch/prcm.h> -#include <linux/kconfig.h> static const struct dram_para dram_para = { .clock = CONFIG_DRAM_CLK, diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c index ebba438..fa1620c 100644 --- a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c +++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c @@ -14,7 +14,6 @@ #include <asm/arch/clock.h> #include <asm/arch/dram.h> #include <asm/arch/prcm.h> -#include <linux/kconfig.h> /* PLL runs at 2x dram-clk, controller runs at PLL / 4 (dram-clk / 2) */ #define DRAM_CLK_MUL 2 diff --git a/arch/arm/cpu/armv7/sunxi/psci_sun6i.S b/arch/arm/cpu/armv7/sunxi/psci_sun6i.S index d4cb51e..4ff46e4 100644 --- a/arch/arm/cpu/armv7/sunxi/psci_sun6i.S +++ b/arch/arm/cpu/armv7/sunxi/psci_sun6i.S @@ -18,6 +18,8 @@ */ #include <config.h> + +#include <asm/arch-armv7/generictimer.h> #include <asm/gic.h> #include <asm/macro.h> #include <asm/psci.h> @@ -43,26 +45,6 @@ #define GICD_BASE 0x1c81000 #define GICC_BASE 0x1c82000 -.macro timer_wait reg, ticks - @ Program CNTP_TVAL - movw \reg, #(\ticks & 0xffff) - movt \reg, #(\ticks >> 16) - mcr p15, 0, \reg, c14, c2, 0 - isb - @ Enable physical timer, mask interrupt - mov \reg, #3 - mcr p15, 0, \reg, c14, c2, 1 - @ Poll physical timer until ISTATUS is on -1: isb - mrc p15, 0, \reg, c14, c2, 1 - ands \reg, \reg, #4 - bne 1b - @ Disable timer - mov \reg, #0 - mcr p15, 0, \reg, c14, c2, 1 - isb -.endm - .globl psci_fiq_enter psci_fiq_enter: push {r0-r12} diff --git a/arch/arm/cpu/armv7/sunxi/psci_sun7i.S b/arch/arm/cpu/armv7/sunxi/psci_sun7i.S index bbfeec8..e15d587 100644 --- a/arch/arm/cpu/armv7/sunxi/psci_sun7i.S +++ b/arch/arm/cpu/armv7/sunxi/psci_sun7i.S @@ -18,6 +18,8 @@ */ #include <config.h> + +#include <asm/arch-armv7/generictimer.h> #include <asm/gic.h> #include <asm/macro.h> #include <asm/psci.h> @@ -43,26 +45,6 @@ #define GICD_BASE 0x1c81000 #define GICC_BASE 0x1c82000 -.macro timer_wait reg, ticks - @ Program CNTP_TVAL - movw \reg, #(\ticks & 0xffff) - movt \reg, #(\ticks >> 16) - mcr p15, 0, \reg, c14, c2, 0 - isb - @ Enable physical timer, mask interrupt - mov \reg, #3 - mcr p15, 0, \reg, c14, c2, 1 - @ Poll physical timer until ISTATUS is on -1: isb - mrc p15, 0, \reg, c14, c2, 1 - ands \reg, \reg, #4 - bne 1b - @ Disable timer - mov \reg, #0 - mcr p15, 0, \reg, c14, c2, 1 - isb -.endm - .globl psci_fiq_enter psci_fiq_enter: push {r0-r12} diff --git a/arch/arm/cpu/armv7/sunxi/usb_phy.c b/arch/arm/cpu/armv7/sunxi/usb_phy.c index b07d67f..4d63a74 100644 --- a/arch/arm/cpu/armv7/sunxi/usb_phy.c +++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c @@ -44,6 +44,7 @@ static struct sunxi_usb_phy { int usb_rst_mask; int gpio_vbus; int gpio_vbus_det; + int gpio_id_det; int id; int init_count; int power_on_count; @@ -82,6 +83,14 @@ static int get_vbus_detect_gpio(int index) return -EINVAL; } +static int get_id_detect_gpio(int index) +{ + switch (index) { + case 0: return sunxi_name_to_gpio(CONFIG_USB0_ID_DET); + } + return -EINVAL; +} + static void usb_phy_write(struct sunxi_usb_phy *phy, int addr, int data, int len) { @@ -228,10 +237,8 @@ int sunxi_usb_phy_vbus_detect(int index) struct sunxi_usb_phy *phy = &sunxi_usb_phy[index]; int err, retries = 3; - if (phy->gpio_vbus_det < 0) { - eprintf("Error: invalid vbus detection pin\n"); + if (phy->gpio_vbus_det < 0) return phy->gpio_vbus_det; - } err = gpio_get_value(phy->gpio_vbus_det); /* @@ -247,6 +254,16 @@ int sunxi_usb_phy_vbus_detect(int index) return err; } +int sunxi_usb_phy_id_detect(int index) +{ + struct sunxi_usb_phy *phy = &sunxi_usb_phy[index]; + + if (phy->gpio_id_det < 0) + return phy->gpio_id_det; + + return gpio_get_value(phy->gpio_id_det); +} + int sunxi_usb_phy_probe(void) { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; @@ -275,6 +292,18 @@ int sunxi_usb_phy_probe(void) if (ret) return ret; } + + phy->gpio_id_det = get_id_detect_gpio(i); + if (phy->gpio_id_det >= 0) { + ret = gpio_request(phy->gpio_id_det, "usb_id_det"); + if (ret) + return ret; + ret = gpio_direction_input(phy->gpio_id_det); + if (ret) + return ret; + sunxi_gpio_set_pull(phy->gpio_id_det, + SUNXI_GPIO_PULL_UP); + } } setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE); @@ -298,6 +327,9 @@ int sunxi_usb_phy_remove(void) if (phy->gpio_vbus_det >= 0) gpio_free(phy->gpio_vbus_det); + + if (phy->gpio_id_det >= 0) + gpio_free(phy->gpio_id_det); } return 0; diff --git a/arch/arm/cpu/armv7m/stm32f4/clock.c b/arch/arm/cpu/armv7m/stm32f4/clock.c index 2eded1f..d520a13 100644 --- a/arch/arm/cpu/armv7m/stm32f4/clock.c +++ b/arch/arm/cpu/armv7m/stm32f4/clock.c @@ -92,7 +92,20 @@ struct pll_psc { #error "CONFIG_STM32_HSE_HZ not defined!" #else #if (CONFIG_STM32_HSE_HZ == 8000000) -struct pll_psc pll_psc_168 = { +#if (CONFIG_SYS_CLK_FREQ == 180000000) +/* 180 MHz */ +struct pll_psc sys_pll_psc = { + .pll_m = 8, + .pll_n = 360, + .pll_p = 2, + .pll_q = 8, + .ahb_psc = AHB_PSC_1, + .apb1_psc = APB_PSC_4, + .apb2_psc = APB_PSC_2 +}; +#else +/* default 168 MHz */ +struct pll_psc sys_pll_psc = { .pll_m = 8, .pll_n = 336, .pll_p = 2, @@ -101,6 +114,7 @@ struct pll_psc pll_psc_168 = { .apb1_psc = APB_PSC_4, .apb2_psc = APB_PSC_2 }; +#endif #else #error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists" #endif @@ -122,19 +136,19 @@ int configure_clocks(void) while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY)) ; - /* Enable high performance mode, System frequency up to 168 MHz */ + /* Enable high performance mode, System frequency up to 180 MHz */ setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN); writel(PWR_CR_VOS_SCALE_MODE_1, &STM32_PWR->cr); setbits_le32(&STM32_RCC->cfgr, (( - pll_psc_168.ahb_psc << RCC_CFGR_HPRE_SHIFT) - | (pll_psc_168.apb1_psc << RCC_CFGR_PPRE1_SHIFT) - | (pll_psc_168.apb2_psc << RCC_CFGR_PPRE2_SHIFT))); - - writel(pll_psc_168.pll_m - | (pll_psc_168.pll_n << RCC_PLLCFGR_PLLN_SHIFT) - | (((pll_psc_168.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT) - | (pll_psc_168.pll_q << RCC_PLLCFGR_PLLQ_SHIFT), + sys_pll_psc.ahb_psc << RCC_CFGR_HPRE_SHIFT) + | (sys_pll_psc.apb1_psc << RCC_CFGR_PPRE1_SHIFT) + | (sys_pll_psc.apb2_psc << RCC_CFGR_PPRE2_SHIFT))); + + writel(sys_pll_psc.pll_m + | (sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT) + | (((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT) + | (sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT), &STM32_RCC->pllcfgr); setbits_le32(&STM32_RCC->pllcfgr, RCC_PLLCFGR_PLLSRC); diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile index dee5e25..6466ebb 100644 --- a/arch/arm/cpu/armv8/Makefile +++ b/arch/arm/cpu/armv8/Makefile @@ -16,4 +16,4 @@ obj-y += tlb.o obj-y += transition.o obj-$(CONFIG_FSL_LSCH3) += fsl-lsch3/ -obj-$(CONFIG_TARGET_XILINX_ZYNQMP) += zynqmp/ +obj-$(CONFIG_ARCH_ZYNQMP) += zynqmp/ diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c index c5ec529..c22f7b6 100644 --- a/arch/arm/cpu/armv8/cache_v8.c +++ b/arch/arm/cpu/armv8/cache_v8.c @@ -25,9 +25,9 @@ void set_pgtable_section(u64 *page_table, u64 index, u64 section, /* to activate the MMU we need to set up virtual memory */ static void mmu_setup(void) { - int i, j, el; bd_t *bd = gd->bd; - u64 *page_table = (u64 *)gd->arch.tlb_addr; + u64 *page_table = (u64 *)gd->arch.tlb_addr, i, j; + int el; /* Setup an identity-mapping for all spaces */ for (i = 0; i < (PGTABLE_SIZE >> 3); i++) { @@ -139,6 +139,37 @@ int dcache_status(void) return (get_sctlr() & CR_C) != 0; } +u64 *__weak arch_get_page_table(void) { + puts("No page table offset defined\n"); + + return NULL; +} + +void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size, + enum dcache_option option) +{ + u64 *page_table = arch_get_page_table(); + u64 upto, end; + + if (page_table == NULL) + return; + + end = ALIGN(start + size, (1 << MMU_SECTION_SHIFT)) >> + MMU_SECTION_SHIFT; + start = start >> MMU_SECTION_SHIFT; + for (upto = start; upto < end; upto++) { + page_table[upto] &= ~PMD_ATTRINDX_MASK; + page_table[upto] |= PMD_ATTRINDX(option); + } + asm volatile("dsb sy"); + __asm_invalidate_tlb_all(); + asm volatile("dsb sy"); + asm volatile("isb"); + start = start << MMU_SECTION_SHIFT; + end = end << MMU_SECTION_SHIFT; + flush_dcache_range(start, end); + asm volatile("dsb sy"); +} #else /* CONFIG_SYS_DCACHE_OFF */ void invalidate_dcache_all(void) @@ -170,6 +201,11 @@ int dcache_status(void) return 0; } +void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size, + enum dcache_option option) +{ +} + #endif /* CONFIG_SYS_DCACHE_OFF */ #ifndef CONFIG_SYS_ICACHE_OFF diff --git a/arch/arm/cpu/armv8/fsl-lsch3/README b/arch/arm/cpu/armv8/fsl-lsch3/README index 37f07fb..3c15479 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/README +++ b/arch/arm/cpu/armv8/fsl-lsch3/README @@ -9,6 +9,31 @@ Freescale LayerScape with Chassis Generation 3 This architecture supports Freescale ARMv8 SoCs with Chassis generation 3, for example LS2085A. +DDR Layout +============ +Entire DDR region splits into two regions. + - Region 1 is at address 0x8000_0000 to 0xffff_ffff. + - Region 2 is at 0x80_8000_0000 to the top of total memory, + for example 16GB, 0x83_ffff_ffff. + +All DDR memory is marked as cache-enabled. + +When MC and Debug server is enabled, they carve 512MB away from the high +end of DDR. For example, if the total DDR is 16GB, it shrinks to 15.5GB +with MC and Debug server enabled. Linux only sees 15.5GB. + +The reserved 512MB layout looks like + + +---------------+ <-- top/end of memory + | 256MB | debug server + +---------------+ + | 256MB | MC + +---------------+ + | ... | + +MC requires the memory to be aligned with 512MB, so even debug server is +not enabled, 512MB is reserved, not 256MB. + Flash Layout ============ diff --git a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c index 6714577..d02c0be 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c @@ -9,6 +9,7 @@ #include <asm/system.h> #include <asm/armv8/mmu.h> #include <asm/io.h> +#include <asm/arch-fsl-lsch3/soc.h> #include <asm/arch-fsl-lsch3/immap_lsch3.h> #include <fsl_debug_server.h> #include <fsl-mc/fsl_mc.h> @@ -22,6 +23,35 @@ DECLARE_GLOBAL_DATA_PTR; +static struct cpu_type cpu_type_list[] = { +#ifdef CONFIG_LS2085A + CPU_TYPE_ENTRY(LS2085, LS2085, 8), + CPU_TYPE_ENTRY(LS2080, LS2080, 8), + CPU_TYPE_ENTRY(LS2045, LS2045, 4), +#endif +}; + +void cpu_name(char *name) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + unsigned int i, svr, ver; + + svr = in_le32(&gur->svr); + ver = SVR_SOC_VER(svr); + + for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++) + if ((cpu_type_list[i].soc_ver & SVR_WO_E) == ver) { + strcpy(name, cpu_type_list[i].name); + + if (IS_E_PROCESSOR(svr)) + strcat(name, "E"); + break; + } + + if (i == ARRAY_SIZE(cpu_type_list)) + strcpy(name, "unknown"); +} + #ifndef CONFIG_SYS_DCACHE_OFF /* * To start MMU before DDR is available, we create MMU table in SRAM. @@ -52,6 +82,12 @@ DECLARE_GLOBAL_DATA_PTR; TCR_ORGN_NC | \ TCR_IRGN_NC | \ TCR_T0SZ(LSCH3_VA_BITS)) +#define LSCH3_TCR_FINAL (TCR_TG0_4K | \ + TCR_EL2_PS_40BIT | \ + TCR_SHARED_OUTER | \ + TCR_ORGN_WBWA | \ + TCR_IRGN_WBWA | \ + TCR_T0SZ(LSCH3_VA_BITS)) /* * Final MMU @@ -236,21 +272,8 @@ static inline void final_mmu_setup(void) /* point TTBR to the new table */ el = current_el(); - asm volatile("dsb sy"); - if (el == 1) { - asm volatile("msr ttbr0_el1, %0" - : : "r" ((u64)level0_table) : "memory"); - } else if (el == 2) { - asm volatile("msr ttbr0_el2, %0" - : : "r" ((u64)level0_table) : "memory"); - } else if (el == 3) { - asm volatile("msr ttbr0_el3, %0" - : : "r" ((u64)level0_table) : "memory"); - } else { - hang(); - } - asm volatile("isb"); - + set_ttbr_tcr_mair(el, (u64)level0_table, LSCH3_TCR_FINAL, + MEMORY_ATTRIBUTES); /* * MMU is already enabled, just need to invalidate TLB to load the * new table. The new table is compatible with the current table, if @@ -380,6 +403,13 @@ int print_cpuinfo(void) unsigned int i, core; u32 type; + puts("SoC: "); + + cpu_name(buf); + printf(" %s (0x%x)\n", buf, in_le32(&gur->svr)); + + memset((u8 *)buf, 0x00, ARRAY_SIZE(buf)); + get_sys_info(&sysinfo); puts("Clock Configuration:"); for_each_cpu(i, core, cpu_numcores(), cpu_mask()) { @@ -394,8 +424,8 @@ int print_cpuinfo(void) } printf("\n Bus: %-4s MHz ", strmhz(buf, sysinfo.freq_systembus)); - printf("DDR: %-4s MHz", strmhz(buf, sysinfo.freq_ddrbus)); - printf(" DP-DDR: %-4s MHz", strmhz(buf, sysinfo.freq_ddrbus2)); + printf("DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus)); + printf(" DP-DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus2)); puts("\n"); /* Display the RCW, so that no one gets confused as to what RCW diff --git a/arch/arm/cpu/armv8/fsl-lsch3/fdt.c b/arch/arm/cpu/armv8/fsl-lsch3/fdt.c index d370023..567c419 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/fdt.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/fdt.c @@ -7,6 +7,7 @@ #include <common.h> #include <libfdt.h> #include <fdt_support.h> +#include <asm/arch-fsl-lsch3/fdt.h> #ifdef CONFIG_FSL_ESDHC #include <fsl_esdhc.h> #endif @@ -58,6 +59,113 @@ void ft_fixup_cpu(void *blob) } #endif +/* + * the burden is on the the caller to not request a count + * exceeding the bounds of the stream_ids[] array + */ +void alloc_stream_ids(int start_id, int count, u32 *stream_ids, int max_cnt) +{ + int i; + + if (count > max_cnt) { + printf("\n%s: ERROR: max per-device stream ID count exceed\n", + __func__); + return; + } + + for (i = 0; i < count; i++) + stream_ids[i] = start_id++; +} + +/* + * This function updates the mmu-masters property on the SMMU + * node as per the SMMU binding-- phandle and list of stream IDs + * for each MMU master. + */ +void append_mmu_masters(void *blob, const char *smmu_path, + const char *master_name, u32 *stream_ids, int count) +{ + u32 phandle; + int smmu_nodeoffset; + int master_nodeoffset; + int i; + + /* get phandle of mmu master device */ + master_nodeoffset = fdt_path_offset(blob, master_name); + if (master_nodeoffset < 0) { + printf("\n%s: ERROR: master not found\n", __func__); + return; + } + phandle = fdt_get_phandle(blob, master_nodeoffset); + if (!phandle) { /* if master has no phandle, create one */ + phandle = fdt_create_phandle(blob, master_nodeoffset); + if (!phandle) { + printf("\n%s: ERROR: unable to create phandle\n", + __func__); + return; + } + } + + /* append it to mmu-masters */ + smmu_nodeoffset = fdt_path_offset(blob, smmu_path); + if (fdt_appendprop_u32(blob, smmu_nodeoffset, "mmu-masters", + phandle) < 0) { + printf("\n%s: ERROR: unable to update SMMU node\n", __func__); + return; + } + + /* for each stream ID, append to mmu-masters */ + for (i = 0; i < count; i++) { + fdt_appendprop_u32(blob, smmu_nodeoffset, "mmu-masters", + stream_ids[i]); + } + + /* fix up #stream-id-cells with stream ID count */ + if (fdt_setprop_u32(blob, master_nodeoffset, "#stream-id-cells", + count) < 0) + printf("\n%s: ERROR: unable to update #stream-id-cells\n", + __func__); +} + + +/* + * The info below summarizes how streamID partitioning works + * for ls2085a and how it is conveyed to the OS via the device tree. + * + * -non-PCI legacy, platform devices (USB, SD/MMC, SATA, DMA) + * -all legacy devices get a unique ICID assigned and programmed in + * their AMQR registers by u-boot + * -u-boot updates the hardware device tree with streamID properties + * for each platform/legacy device (smmu-masters property) + * + * -PCIe + * -for each PCI controller that is active (as per RCW settings), + * u-boot will allocate a range of ICID and convey that to Linux via + * the device tree (smmu-masters property) + * + * -DPAA2 + * -u-boot will allocate a range of ICIDs to be used by the Management + * Complex for containers and will set these values in the MC DPC image. + * -the MC is responsible for allocating and setting up ICIDs + * for all DPAA2 devices. + * + */ +static void fdt_fixup_smmu(void *blob) +{ + int nodeoffset; + + nodeoffset = fdt_path_offset(blob, "/iommu@5000000"); + if (nodeoffset < 0) { + printf("\n%s: WARNING: no SMMU node found\n", __func__); + return; + } + + /* fixup for all PCI controllers */ +#ifdef CONFIG_PCI + fdt_fixup_smmu_pcie(blob); +#endif +} + void ft_cpu_setup(void *blob, bd_t *bd) { #ifdef CONFIG_MP @@ -69,7 +177,13 @@ void ft_cpu_setup(void *blob, bd_t *bd) "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); #endif +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif + #if defined(CONFIG_FSL_ESDHC) fdt_fixup_esdhc(blob, bd); #endif + + fdt_fixup_smmu(blob); } diff --git a/arch/arm/cpu/armv8/fsl-lsch3/speed.c b/arch/arm/cpu/armv8/fsl-lsch3/speed.c index cac4f92..d9f137c 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/speed.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/speed.c @@ -180,6 +180,8 @@ unsigned int mxc_get_clock(enum mxc_clock clk) switch (clk) { case MXC_I2C_CLK: return get_bus_freq(0) / 2; + case MXC_DSPI_CLK: + return get_bus_freq(0) / 2; default: printf("Unsupported clock\n"); } diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S index e5f2766..e70bed4 100644 --- a/arch/arm/cpu/armv8/start.S +++ b/arch/arm/cpu/armv8/start.S @@ -115,18 +115,18 @@ apply_a57_core_errata: #ifdef CONFIG_ARM_ERRATA_828024 mrs x0, S3_1_c15_c2_0 /* cpuactlr_el1 */ /* Disable non-allocate hint of w-b-n-a memory type */ - mov x0, #0x1 << 49 + orr x0, x0, #1 << 49 /* Disable write streaming no L1-allocate threshold */ - mov x0, #0x3 << 25 + orr x0, x0, #3 << 25 /* Disable write streaming no-allocate threshold */ - mov x0, #0x3 << 27 + orr x0, x0, #3 << 27 msr S3_1_c15_c2_0, x0 /* cpuactlr_el1 */ #endif #ifdef CONFIG_ARM_ERRATA_826974 mrs x0, S3_1_c15_c2_0 /* cpuactlr_el1 */ /* Disable speculative load execution ahead of a DMB */ - mov x0, #0x1 << 59 + orr x0, x0, #1 << 59 msr S3_1_c15_c2_0, x0 /* cpuactlr_el1 */ #endif diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig b/arch/arm/cpu/armv8/zynqmp/Kconfig new file mode 100644 index 0000000..c8fcfb6 --- /dev/null +++ b/arch/arm/cpu/armv8/zynqmp/Kconfig @@ -0,0 +1,23 @@ +if ARCH_ZYNQMP + +choice + prompt "Xilinx ZynqMP board select" + +config TARGET_ZYNQMP_EP + bool "ZynqMP EP Board" + +endchoice + +config SYS_BOARD + default "zynqmp" + +config SYS_VENDOR + default "xilinx" + +config SYS_SOC + default "zynqmp" + +config SYS_CONFIG_NAME + default "xilinx_zynqmp_ep" if TARGET_ZYNQMP_EP + +endif diff --git a/arch/arm/cpu/armv8/zynqmp/Makefile b/arch/arm/cpu/armv8/zynqmp/Makefile index efab5ea..d0ed222 100644 --- a/arch/arm/cpu/armv8/zynqmp/Makefile +++ b/arch/arm/cpu/armv8/zynqmp/Makefile @@ -8,3 +8,4 @@ obj-y += clk.o obj-y += cpu.o obj-$(CONFIG_MP) += mp.o +obj-y += slcr.o diff --git a/arch/arm/cpu/armv8/zynqmp/mp.c b/arch/arm/cpu/armv8/zynqmp/mp.c index 17e32a7..dcb80b5 100644 --- a/arch/arm/cpu/armv8/zynqmp/mp.c +++ b/arch/arm/cpu/armv8/zynqmp/mp.c @@ -216,12 +216,7 @@ int cpu_release(int nr, int argc, char * const argv[]) printf("R5 lockstep mode\n"); set_r5_tcm_mode(LOCK); set_r5_halt_mode(HALT, LOCK); - - if (boot_addr == 0) - set_r5_start(0); - else - set_r5_start(1); - + set_r5_start(boot_addr); enable_clock_r5(); release_r5_reset(LOCK); set_r5_halt_mode(RELEASE, LOCK); diff --git a/arch/arm/cpu/armv8/zynqmp/slcr.c b/arch/arm/cpu/armv8/zynqmp/slcr.c new file mode 100644 index 0000000..713e9a6 --- /dev/null +++ b/arch/arm/cpu/armv8/zynqmp/slcr.c @@ -0,0 +1,63 @@ +/* + * (C) Copyright 2014 - 2015 Xilinx, Inc. + * Michal Simek <michal.simek@xilinx.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <malloc.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/clk.h> + +/* + * zynq_slcr_mio_get_status - Get the status of MIO peripheral. + * + * @peri_name: Name of the peripheral for checking MIO status + * @get_pins: Pointer to array of get pin for this peripheral + * @num_pins: Number of pins for this peripheral + * @mask: Mask value + * @check_val: Required check value to get the status of periph + */ +struct zynq_slcr_mio_get_status { + const char *peri_name; + const int *get_pins; + int num_pins; + u32 mask; + u32 check_val; +}; + +static const struct zynq_slcr_mio_get_status mio_periphs[] = { +}; + +/* + * zynq_slcr_get_mio_pin_status - Get the MIO pin status of peripheral. + * + * @periph: Name of the peripheral + * + * Returns count to indicate the number of pins configured for the + * given @periph. + */ +int zynq_slcr_get_mio_pin_status(const char *periph) +{ + const struct zynq_slcr_mio_get_status *mio_ptr; + int val, i, j; + int mio = 0; + + for (i = 0; i < ARRAY_SIZE(mio_periphs); i++) { + if (strcmp(periph, mio_periphs[i].peri_name) == 0) { + mio_ptr = &mio_periphs[i]; + for (j = 0; j < mio_ptr->num_pins; j++) { + val = readl(&slcr_base->mio_pin + [mio_ptr->get_pins[j]]); + if ((val & mio_ptr->mask) == mio_ptr->check_val) + mio++; + } + break; + } + } + + return mio; +} diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds index a8be204..c5b4f7c 100644 --- a/arch/arm/cpu/u-boot-spl.lds +++ b/arch/arm/cpu/u-boot-spl.lds @@ -32,17 +32,17 @@ SECTIONS } . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*_i2c_*))); - } - - . = .; #ifdef CONFIG_SPL_DM .u_boot_list : { KEEP(*(SORT(.u_boot_list_*_driver_*))); KEEP(*(SORT(.u_boot_list_*_uclass_*))); } #endif + . = .; + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*_i2c_*))); + } + . = ALIGN(4); __image_copy_end = .; @@ -66,7 +66,7 @@ SECTIONS . = ALIGN(4); __bss_end = .; } - + __bss_size = __bss_end - __bss_start; .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 19e1de6..ba63553 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -32,7 +32,8 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra114-dalmore.dtb \ tegra124-jetson-tk1.dtb \ tegra124-nyan-big.dtb \ - tegra124-venice2.dtb + tegra124-venice2.dtb \ + tegra210-p2571.dtb dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ph1-sld3-ref.dtb \ uniphier-ph1-pro4-ref.dtb \ @@ -45,6 +46,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \ zynq-microzed.dtb \ zynq-picozed.dtb \ zynq-zc770-xm010.dtb \ + zynq-zc770-xm011.dtb \ zynq-zc770-xm012.dtb \ zynq-zc770-xm013.dtb dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb @@ -57,6 +59,8 @@ dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \ ls1021a-twr.dtb +dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2085a-qds.dtb \ + fsl-ls2085a-rdb.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ diff --git a/arch/arm/dts/fsl-ls2085a-qds.dts b/arch/arm/dts/fsl-ls2085a-qds.dts new file mode 100644 index 0000000..4477e54 --- /dev/null +++ b/arch/arm/dts/fsl-ls2085a-qds.dts @@ -0,0 +1,53 @@ +/* + * Freescale ls2085a QDS board device tree source + * + * Copyright 2013-2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "fsl-ls2085a.dtsi" + +/ { + model = "Freescale Layerscape 2085a QDS Board"; + compatible = "fsl,ls2085a-qds", "fsl,ls2085a"; + + aliases { + spi1 = &dspi; + }; +}; + +&dspi { + bus-num = <0>; + status = "okay"; + + dflash0: n25q128a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; + dflash1: sst25wf040b { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <1>; + }; + dflash2: en25s64 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <2>; + }; +}; diff --git a/arch/arm/dts/fsl-ls2085a-rdb.dts b/arch/arm/dts/fsl-ls2085a-rdb.dts new file mode 100644 index 0000000..25278df --- /dev/null +++ b/arch/arm/dts/fsl-ls2085a-rdb.dts @@ -0,0 +1,35 @@ +/* + * Freescale ls2085a RDB board device tree source + * + * Copyright 2013-2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "fsl-ls2085a.dtsi" + +/ { + model = "Freescale Layerscape 2085a RDB Board"; + compatible = "fsl,ls2085a-rdb", "fsl,ls2085a"; + + aliases { + spi1 = &dspi; + }; +}; + +&dspi { + bus-num = <0>; + status = "okay"; + + dflash0: n25q512a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; diff --git a/arch/arm/dts/fsl-ls2085a.dtsi b/arch/arm/dts/fsl-ls2085a.dtsi new file mode 100644 index 0000000..96404c5 --- /dev/null +++ b/arch/arm/dts/fsl-ls2085a.dtsi @@ -0,0 +1,129 @@ +/* + * Freescale ls2085a SOC common device tree source + * + * Copyright 2013-2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/ { + compatible = "fsl,ls2085a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* + * We expect the enable-method for cpu's to be "psci", but this + * is dependent on the SoC FW, which will fill this in. + * + * Currently supported enable-method is psci v0.2 + */ + + /* We have 4 clusters having 2 Cortex-A57 cores each */ + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x1>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + }; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x201>; + }; + + cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x300>; + }; + + cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x301>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + /* DRAM space - 1, size : 2 GB DRAM */ + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <1 9 0x4>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ + <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ + <1 11 0x8>, /* Virtual PPI, active-low */ + <1 10 0x8>; /* Hypervisor PPI, active-low */ + }; + + serial0: serial@21c0500 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + serial1: serial@21c0600 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + }; + + dspi: dspi@2100000 { + compatible = "fsl,vf610-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <0 26 0x4>; /* Level high type */ + num-cs = <6>; + }; +}; diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts index 8c1bca7..514f159 100644 --- a/arch/arm/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts @@ -52,14 +52,6 @@ model = "Utoo P66"; compatible = "utoo,p66", "allwinner,sun5i-a13"; - aliases { - serial0 = &uart1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - i2c_lcd: i2c@0 { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; @@ -227,12 +219,6 @@ status = "okay"; }; -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; -}; - &usbphy { usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi index 7abd0ae..5cd2e92 100644 --- a/arch/arm/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -332,6 +332,24 @@ #size-cells = <0>; }; + ehci0: usb@01c1a000 { + compatible = "allwinner,sun8i-a23-ehci", "generic-ehci"; + reg = <0x01c1a000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb1_gates 26>; + resets = <&ahb1_rst 26>; + status = "disabled"; + }; + + ohci0: usb@01c1a400 { + compatible = "allwinner,sun8i-a23-ohci", "generic-ohci"; + reg = <0x01c1a400 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb1_gates 29>, <&usb_clk 16>; + resets = <&ahb1_rst 29>; + status = "disabled"; + }; + pio: pinctrl@01c20800 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c20800 0x400>; diff --git a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts index 8667033..da16343 100644 --- a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts +++ b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts @@ -61,6 +61,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -109,6 +113,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &pio { mmc0_cd_pin_q8h: mmc0_cd_pin@0 { allwinner,pins = "PB4"; diff --git a/arch/arm/dts/tegra210-p2571.dts b/arch/arm/dts/tegra210-p2571.dts new file mode 100644 index 0000000..de35bba --- /dev/null +++ b/arch/arm/dts/tegra210-p2571.dts @@ -0,0 +1,106 @@ +/dts-v1/; + +#include "tegra210.dtsi" + +/ { + model = "NVIDIA P2571"; + compatible = "nvidia,p2571", "nvidia,tegra210"; + + chosen { + stdout-path = &uarta; + }; + + aliases { + i2c0 = "/i2c@0,7000d000"; + i2c1 = "/i2c@0,7000c000"; + i2c2 = "/i2c@0,7000c400"; + i2c3 = "/i2c@0,7000c500"; + i2c4 = "/i2c@0,7000c700"; + i2c5 = "/i2c@0,7000d100"; + sdhci0 = "/sdhci@0,700b0600"; + sdhci1 = "/sdhci@0,700b0000"; + spi0 = "/spi@0,7000d400"; + spi1 = "/spi@0,7000da00"; + spi2 = "/spi@0,70410000"; + usb0 = "/usb@0,7d000000"; + }; + + memory { + reg = <0x0 0x80000000 0x0 0xc0000000>; + }; + + i2c@0,7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000d000 { + status = "okay"; + clock-frequency = <400000>; + }; + + i2c@0,7000d100 { + status = "okay"; + clock-frequency = <400000>; + }; + + spi@0,7000d400 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + spi@0,7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + spi@0,70410000 { + status = "okay"; + spi-max-frequency = <24000000>; + }; + + sdhci@0,700b0000 { + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + }; + + sdhci@0,700b0600 { + status = "okay"; + bus-width = <8>; + }; + + usb@0,7d000000 { + status = "okay"; + dr_mode = "otg"; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; diff --git a/arch/arm/dts/tegra210.dtsi b/arch/arm/dts/tegra210.dtsi new file mode 100644 index 0000000..f3874a1 --- /dev/null +++ b/arch/arm/dts/tegra210.dtsi @@ -0,0 +1,283 @@ +#include <dt-bindings/clock/tegra210-car.h> +#include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> + +#include "skeleton.dtsi" + +/ { + compatible = "nvidia,tegra210"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + gic: interrupt-controller@0,50041000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x50041000 0x0 0x1000>, + <0x0 0x50042000 0x0 0x2000>, + <0x0 0x50044000 0x0 0x2000>, + <0x0 0x50046000 0x0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + tegra_car: clock@0,60006000 { + compatible = "nvidia,tegra210-car"; + reg = <0x0 0x60006000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + gpio: gpio@0,6000d000 { + compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio"; + reg = <0x0 0x6000d000 0x0 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + i2c@0,7000c000 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c000 0x0 0x100>; + interrupts = <0 38 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 12>; + status = "disabled"; + }; + + i2c@0,7000c400 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c400 0x0 0x100>; + interrupts = <0 84 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 54>; + status = "disabled"; + }; + + i2c@0,7000c500 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c500 0x0 0x100>; + interrupts = <0 92 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 67>; + status = "disabled"; + }; + + i2c@0,7000c700 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c700 0x0 0x100>; + interrupts = <0 120 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 103>; + status = "disabled"; + }; + + i2c@0,7000d000 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000d000 0x0 0x100>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 47>; + status = "disabled"; + }; + + i2c@0,7000d100 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000d100 0x0 0x100>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 47>; + status = "disabled"; + }; + + uarta: serial@0,70006000 { + compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_UARTA>; + resets = <&tegra_car 6>; + reset-names = "serial"; + status = "disabled"; + }; + + uartb: serial@0,70006040 { + compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006040 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_UARTB>; + resets = <&tegra_car 7>; + reset-names = "serial"; + status = "disabled"; + }; + + uartc: serial@0,70006200 { + compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006200 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_UARTC>; + resets = <&tegra_car 55>; + reset-names = "serial"; + status = "disabled"; + }; + + uartd: serial@0,70006300 { + compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006300 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_UARTD>; + resets = <&tegra_car 65>; + reset-names = "serial"; + status = "disabled"; + }; + + spi@0,7000d400 { + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000d400 0x0 0x200>; + interrupts = <0 59 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_SBC1>; + resets = <&tegra_car 41>; + reset-names = "spi"; + status = "disabled"; + }; + + spi@0,7000d600 { + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000d600 0x0 0x200>; + interrupts = <0 82 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_SBC2>; + resets = <&tegra_car 44>; + reset-names = "spi"; + status = "disabled"; + }; + + spi@0,7000d800 { + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000d800 0x0 0x200>; + interrupts = <0 83 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_SBC3>; + resets = <&tegra_car 46>; + reset-names = "spi"; + status = "disabled"; + }; + + spi@0,7000da00 { + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000da00 0x0 0x200>; + interrupts = <0 93 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_SBC4>; + resets = <&tegra_car 68>; + reset-names = "spi"; + status = "disabled"; + }; + + spi@0,70410000 { + compatible = "nvidia,tegra210-qspi"; + reg = <0x0 0x70410000 0x0 0x1000>; + interrupts = <0 10 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 211>; + status = "disabled"; + }; + + padctl: padctl@0,7009f000 { + compatible = "nvidia,tegra210-xusb-padctl"; + reg = <0x0 0x7009f000 0x0 0x1000>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + #phy-cells = <1>; + }; + + sdhci@0,700b0000 { + compatible = "nvidia,tegra210-sdhci"; + reg = <0x0 0x700b0000 0x0 0x200>; + interrupts = <0 14 0x04>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC1>; + resets = <&tegra_car 14>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdhci@0,700b0200 { + compatible = "nvidia,tegra210-sdhci"; + reg = <0x0 0x700b0200 0x0 0x200>; + interrupts = <0 15 0x04>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC2>; + resets = <&tegra_car 9>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdhci@0,700b0400 { + compatible = "nvidia,tegra210-sdhci"; + reg = <0x0 0x700b0400 0x0 0x200>; + interrupts = <0 19 0x04>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC3>; + resets = <&tegra_car 69>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdhci@0,700b0600 { + compatible = "nvidia,tegra210-sdhci"; + reg = <0x0 0x700b0600 0x0 0x200>; + interrupts = <0 31 0x04>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC4>; + resets = <&tegra_car 15>; + reset-names = "sdhci"; + status = "disabled"; + }; + + usb@0,7d000000 { + compatible = "nvidia,tegra210-ehci"; + reg = <0x0 0x7d000000 0x0 0x4000>; + interrupts = <0 20 0x04>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA210_CLK_USBD>; + resets = <&tegra_car 22>; + reset-names = "usb"; + status = "disabled"; + }; + + usb@0,7d004000 { + compatible = "nvidia,tegra210-ehci"; + reg = <0x0 0x7d004000 0x0 0x4000>; + interrupts = < 53 >; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA210_CLK_USB2>; + resets = <&tegra_car 58>; + reset-names = "usb"; + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/uniphier-ph1-sld3.dtsi b/arch/arm/dts/uniphier-ph1-sld3.dtsi index 2fa42a6..5e29436 100644 --- a/arch/arm/dts/uniphier-ph1-sld3.dtsi +++ b/arch/arm/dts/uniphier-ph1-sld3.dtsi @@ -129,6 +129,15 @@ status = "disabled"; }; + i2c4: i2c@58600000 { + compatible = "panasonic,uniphier-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58600000 0x40>; + clock-frequency = <400000>; + status = "okay"; + }; + system-bus-controller-misc@59800000 { compatible = "socionext,uniphier-system-bus-controller-misc", "syscon"; diff --git a/arch/arm/dts/uniphier-ref-daughter.dtsi b/arch/arm/dts/uniphier-ref-daughter.dtsi index 84b2206..b8960fd 100644 --- a/arch/arm/dts/uniphier-ref-daughter.dtsi +++ b/arch/arm/dts/uniphier-ref-daughter.dtsi @@ -8,7 +8,7 @@ &i2c0 { eeprom { - compatible = "i2c-eeprom"; + compatible = "microchip,24lc128", "i2c-eeprom"; reg = <0x50>; u-boot,i2c-offset-len = <2>; }; diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi index 9207159..0b62cb0 100644 --- a/arch/arm/dts/zynq-7000.dtsi +++ b/arch/arm/dts/zynq-7000.dtsi @@ -2,7 +2,7 @@ * Xilinx Zynq 7000 DTSI * Describes the hardware common to all Zynq 7000-based boards. * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2011 - 2015 Xilinx * * SPDX-License-Identifier: GPL-2.0+ */ @@ -21,11 +21,11 @@ reg = <0>; clocks = <&clkc 3>; clock-latency = <1000>; + cpu0-supply = <®ulator_vccpint>; operating-points = < /* kHz uV */ 666667 1000000 333334 1000000 - 222223 1000000 >; }; @@ -44,14 +44,65 @@ reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >; }; - amba { + regulator_vccpint: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VCCPINT"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + amba: amba { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&intc>; ranges; - i2c0: zynq-i2c@e0004000 { + adc: adc@f8007100 { + compatible = "xlnx,zynq-xadc-1.00.a"; + reg = <0xf8007100 0x20>; + interrupts = <0 7 4>; + interrupt-parent = <&intc>; + clocks = <&clkc 12>; + }; + + can0: can@e0008000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clocks = <&clkc 19>, <&clkc 36>; + clock-names = "can_clk", "pclk"; + reg = <0xe0008000 0x1000>; + interrupts = <0 28 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + can1: can@e0009000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clocks = <&clkc 20>, <&clkc 37>; + clock-names = "can_clk", "pclk"; + reg = <0xe0009000 0x1000>; + interrupts = <0 51 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + gpio0: gpio@e000a000 { + compatible = "xlnx,zynq-gpio-1.0"; + #gpio-cells = <2>; + clocks = <&clkc 42>; + gpio-controller; + interrupt-parent = <&intc>; + interrupts = <0 20 4>; + reg = <0xe000a000 0x1000>; + }; + + i2c0: i2c@e0004000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; clocks = <&clkc 38>; @@ -62,7 +113,7 @@ #size-cells = <0>; }; - i2c1: zynq-i2c@e0005000 { + i2c1: i2c@e0005000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; clocks = <&clkc 39>; @@ -76,41 +127,46 @@ intc: interrupt-controller@f8f01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; interrupt-controller; reg = <0xF8F01000 0x1000>, <0xF8F00100 0x100>; }; - L2: cache-controller { + L2: cache-controller@f8f02000 { compatible = "arm,pl310-cache"; reg = <0xF8F02000 0x1000>; + interrupts = <0 2 4>; arm,data-latency = <3 2 2>; arm,tag-latency = <2 2 2>; cache-unified; cache-level = <2>; }; - uart0: uart@e0000000 { - compatible = "xlnx,xuartps"; + mc: memory-controller@f8006000 { + compatible = "xlnx,zynq-ddrc-a05"; + reg = <0xf8006000 0x1000>; + }; + + uart0: serial@e0000000 { + compatible = "xlnx,xuartps", "cdns,uart-r1p8"; status = "disabled"; clocks = <&clkc 23>, <&clkc 40>; - clock-names = "ref_clk", "aper_clk"; + clock-names = "uart_clk", "pclk"; reg = <0xE0000000 0x1000>; interrupts = <0 27 4>; }; - uart1: uart@e0001000 { - compatible = "xlnx,xuartps"; + uart1: serial@e0001000 { + compatible = "xlnx,xuartps", "cdns,uart-r1p8"; status = "disabled"; clocks = <&clkc 24>, <&clkc 41>; - clock-names = "ref_clk", "aper_clk"; + clock-names = "uart_clk", "pclk"; reg = <0xE0001000 0x1000>; interrupts = <0 50 4>; }; spi0: spi@e0006000 { - compatible = "xlnx,zynq-spi"; + compatible = "xlnx,zynq-spi-r1p6"; reg = <0xe0006000 0x1000>; status = "disabled"; interrupt-parent = <&intc>; @@ -123,7 +179,7 @@ }; spi1: spi@e0007000 { - compatible = "xlnx,zynq-spi"; + compatible = "xlnx,zynq-spi-r1p6"; reg = <0xe0007000 0x1000>; status = "disabled"; interrupt-parent = <&intc>; @@ -136,24 +192,28 @@ }; gem0: ethernet@e000b000 { - compatible = "cdns,gem"; - reg = <0xe000b000 0x4000>; + compatible = "cdns,zynq-gem", "cdns,gem"; + reg = <0xe000b000 0x1000>; status = "disabled"; interrupts = <0 22 4>; clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; }; gem1: ethernet@e000c000 { - compatible = "cdns,gem"; - reg = <0xe000c000 0x4000>; + compatible = "cdns,zynq-gem", "cdns,gem"; + reg = <0xe000c000 0x1000>; status = "disabled"; interrupts = <0 45 4>; clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>; clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; }; - sdhci0: ps7-sdhci@e0100000 { + sdhci0: sdhci@e0100000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -163,7 +223,7 @@ reg = <0xe0100000 0x1000>; } ; - sdhci1: ps7-sdhci@e0101000 { + sdhci1: sdhci@e0101000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -176,13 +236,12 @@ slcr: slcr@f8000000 { #address-cells = <1>; #size-cells = <1>; - compatible = "xlnx,zynq-slcr", "syscon"; + compatible = "xlnx,zynq-slcr", "syscon", "simple-bus"; reg = <0xF8000000 0x1000>; ranges; clkc: clkc@100 { #clock-cells = <1>; compatible = "xlnx,ps7-clkc"; - ps-clk-frequency = <33333333>; fclk-enable = <0>; clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", @@ -197,6 +256,35 @@ "dbg_trc", "dbg_apb"; reg = <0x100 0x100>; }; + + pinctrl0: pinctrl@700 { + compatible = "xlnx,pinctrl-zynq"; + reg = <0x700 0x200>; + syscon = <&slcr>; + }; + }; + + dmac_s: dmac@f8003000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xf8003000 0x1000>; + interrupt-parent = <&intc>; + interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3", + "dma4", "dma5", "dma6", "dma7"; + interrupts = <0 13 4>, + <0 14 4>, <0 15 4>, + <0 16 4>, <0 17 4>, + <0 40 4>, <0 41 4>, + <0 42 4>, <0 43 4>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <4>; + clocks = <&clkc 27>; + clock-names = "apb_pclk"; + }; + + devcfg: devcfg@f8007000 { + compatible = "xlnx,zynq-devcfg-1.0"; + reg = <0xf8007000 0x100>; }; global_timer: timer@f8f00200 { @@ -207,27 +295,57 @@ clocks = <&clkc 4>; }; - ttc0: ttc0@f8001000 { + ttc0: timer@f8001000 { interrupt-parent = <&intc>; - interrupts = < 0 10 4 0 11 4 0 12 4 >; + interrupts = <0 10 4>, <0 11 4>, <0 12 4>; compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8001000 0x1000>; }; - ttc1: ttc1@f8002000 { + ttc1: timer@f8002000 { interrupt-parent = <&intc>; - interrupts = < 0 37 4 0 38 4 0 39 4 >; + interrupts = <0 37 4>, <0 38 4>, <0 39 4>; compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8002000 0x1000>; }; - scutimer: scutimer@f8f00600 { + + scutimer: timer@f8f00600 { interrupt-parent = <&intc>; interrupts = < 1 13 0x301 >; compatible = "arm,cortex-a9-twd-timer"; reg = < 0xf8f00600 0x20 >; clocks = <&clkc 4>; } ; + + usb0: usb@e0002000 { + compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; + status = "disabled"; + clocks = <&clkc 28>; + interrupt-parent = <&intc>; + interrupts = <0 21 4>; + reg = <0xe0002000 0x1000>; + phy_type = "ulpi"; + }; + + usb1: usb@e0003000 { + compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; + status = "disabled"; + clocks = <&clkc 29>; + interrupt-parent = <&intc>; + interrupts = <0 44 4>; + reg = <0xe0003000 0x1000>; + phy_type = "ulpi"; + }; + + watchdog0: watchdog@f8005000 { + clocks = <&clkc 45>; + compatible = "cdns,wdt-r1p2"; + interrupt-parent = <&intc>; + interrupts = <0 9 1>; + reg = <0xf8005000 0x1000>; + timeout-sec = <10>; + }; }; }; diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts index 4fa0b00..6691a8d 100644 --- a/arch/arm/dts/zynq-zc702.dts +++ b/arch/arm/dts/zynq-zc702.dts @@ -1,7 +1,8 @@ /* * Xilinx ZC702 board DTS * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2011 - 2015 Xilinx + * Copyright (C) 2012 National Instruments Corp. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,15 +10,380 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC702 Board"; + model = "Zynq ZC702 Development Board"; compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; serial0 = &uart1; }; memory { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; }; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw14 { + label = "sw14"; + gpios = <&gpio0 12 0>; + linux,code = <108>; /* down */ + gpio-key,wakeup; + autorepeat; + }; + sw13 { + label = "sw13"; + gpios = <&gpio0 14 0>; + linux,code = <103>; /* up */ + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + + ds23 { + label = "ds23"; + gpios = <&gpio0 10 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&amba { + ocm: sram@fffc0000 { + compatible = "mmio-sram"; + reg = <0xfffc0000 0x10000>; + }; +}; + +&can0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem0_default>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + + i2cswitch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + hwmon@52 { + compatible = "ti,ucd9248"; + reg = <52>; + }; + hwmon@53 { + compatible = "ti,ucd9248"; + reg = <53>; + }; + hwmon@54 { + compatible = "ti,ucd9248"; + reg = <54>; + }; + }; + }; +}; + +&pinctrl0 { + pinctrl_can0_default: can0-default { + mux { + function = "can0"; + groups = "can0_9_grp"; + }; + + conf { + groups = "can0_9_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO46"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO47"; + bias-disable; + }; + }; + + pinctrl_gem0_default: gem0-default { + mux { + function = "ethernet0"; + groups = "ethernet0_0_grp"; + }; + + conf { + groups = "ethernet0_0_grp"; + slew-rate = <0>; + io-standard = <4>; + }; + + conf-rx { + pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio0"; + groups = "mdio0_0_grp"; + }; + + conf-mdio { + groups = "mdio0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + }; + + pinctrl_gpio0_default: gpio0-default { + mux { + function = "gpio0"; + groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", + "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", + "gpio0_13_grp", "gpio0_14_grp"; + }; + + conf { + groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", + "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", + "gpio0_13_grp", "gpio0_14_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-pull-up { + pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO7", "MIO8"; + bias-disable; + }; + }; + + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_10_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_10_grp"; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_2_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_2_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + + mux-cd { + groups = "gpio0_0_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "gpio0_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + + mux-wp { + groups = "gpio0_15_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "gpio0_15_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO49"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO48"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO29", "MIO31", "MIO36"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", + "MIO35", "MIO37", "MIO38", "MIO39"; + bias-disable; + }; + }; +}; + +&sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; }; diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts index 2a80195..cf7bce4 100644 --- a/arch/arm/dts/zynq-zc706.dts +++ b/arch/arm/dts/zynq-zc706.dts @@ -1,7 +1,8 @@ /* * Xilinx ZC706 board DTS * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2011 - 2015 Xilinx + * Copyright (C) 2012 National Instruments Corp. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,15 +10,301 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC706 Board"; + model = "Zynq ZC706 Development Board"; compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; serial0 = &uart1; }; memory { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; }; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem0_default>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + + i2cswitch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + ucd90120@65 { + compatible = "ti,ucd90120"; + reg = <0x65>; + }; + }; + }; +}; + +&pinctrl0 { + pinctrl_gem0_default: gem0-default { + mux { + function = "ethernet0"; + groups = "ethernet0_0_grp"; + }; + + conf { + groups = "ethernet0_0_grp"; + slew-rate = <0>; + io-standard = <4>; + }; + + conf-rx { + pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21"; + low-power-enable; + bias-disable; + }; + + mux-mdio { + function = "mdio0"; + groups = "mdio0_0_grp"; + }; + + conf-mdio { + groups = "mdio0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + }; + + pinctrl_gpio0_default: gpio0-default { + mux { + function = "gpio0"; + groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; + }; + + conf { + groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-pull-up { + pins = "MIO46", "MIO47"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO7"; + bias-disable; + }; + }; + + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_10_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_10_grp"; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_2_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_2_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + + mux-cd { + groups = "gpio0_14_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "gpio0_14_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + + mux-wp { + groups = "gpio0_15_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "gpio0_15_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO49"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO48"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO29", "MIO31", "MIO36"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", + "MIO35", "MIO37", "MIO38", "MIO39"; + bias-disable; + }; + }; +}; + +&sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; }; diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts index bf107e3..da3a182 100644 --- a/arch/arm/dts/zynq-zc770-xm010.dts +++ b/arch/arm/dts/zynq-zc770-xm010.dts @@ -1,7 +1,7 @@ /* * Xilinx ZC770 XM010 board DTS * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2013 - 2015 Xilinx, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,20 +9,85 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC770 XM010 Board"; compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; serial0 = &uart1; - spi1 = &spi1; + spi0 = &spi1; }; - memory { + chosen { + bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk"; + linux,stdout-path = &uart1; + stdout-path = &uart1; + }; + + memory@0 { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; }; &spi1 { status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; + flash@0 { + compatible = "sst25wf080"; + reg = <1>; + spi-max-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@test { + label = "spi-flash"; + reg = <0x0 0x100000>; + }; + }; +}; + +&can0 { + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + m24c02_eeprom@52 { + compatible = "at,24c02"; + reg = <0x52>; + }; + +}; + +&sdhci0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; }; diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts new file mode 100644 index 0000000..d38c820 --- /dev/null +++ b/arch/arm/dts/zynq-zc770-xm011.dts @@ -0,0 +1,65 @@ +/* + * Xilinx ZC770 XM013 board DTS + * + * Copyright (C) 2013 Xilinx, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/dts-v1/; +#include "zynq-7000.dtsi" +/ { + compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + i2c0 = &i2c1; + serial0 = &uart1; + spi0 = &spi0; + }; + + chosen { + bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk"; + linux,stdout-path = &uart1; + stdout-path = &uart1; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + usb_phy1: phy1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&spi0 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; +}; + +&can0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + m24c02_eeprom@52 { + compatible = "at,24c02"; + reg = <0x52>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy1>; +}; diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts index 127a661..f8cc503 100644 --- a/arch/arm/dts/zynq-zc770-xm012.dts +++ b/arch/arm/dts/zynq-zc770-xm012.dts @@ -1,7 +1,7 @@ /* * Xilinx ZC770 XM012 board DTS * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2013 - 2015 Xilinx, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,15 +9,58 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC770 XM012 Board"; compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; serial0 = &uart1; + spi0 = &spi1; }; - memory { + chosen { + bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk"; + linux,stdout-path = &uart1; + stdout-path = &uart1; + }; + + memory@0 { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; + }; +}; + +&spi1 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; +}; + +&can1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + m24c02_eeprom@52 { + compatible = "at,24c02"; + reg = <0x52>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + m24c02_eeprom@52 { + compatible = "at,24c02"; + reg = <0x52>; }; }; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts index c61c7e7..436a8cd 100644 --- a/arch/arm/dts/zynq-zc770-xm013.dts +++ b/arch/arm/dts/zynq-zc770-xm013.dts @@ -9,15 +9,71 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC770 XM013 Board"; compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; aliases { + ethernet0 = &gem1; + i2c0 = &i2c1; serial0 = &uart0; + spi0 = &spi0; }; - memory { + chosen { + bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk"; + linux,stdout-path = &uart0; + stdout-path = &uart0; + }; + + memory@0 { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; + }; +}; + +&spi0 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; + eeprom: at25@0 { + at25,byte-len = <8192>; + at25,addr-mode = <2>; + at25,page-size = <32>; + + compatible = "atmel,at25"; + reg = <2>; + spi-max-frequency = <1000000>; + }; +}; + +&can1 { + status = "okay"; +}; + +&gem1 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; }; }; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + si570: clock-generator@55 { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x55>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts index 70cc8a6..5762576 100644 --- a/arch/arm/dts/zynq-zed.dts +++ b/arch/arm/dts/zynq-zed.dts @@ -1,7 +1,8 @@ /* * Xilinx ZED board DTS * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2011 - 2015 Xilinx + * Copyright (C) 2012 National Instruments Corp. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,15 +10,54 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZED Board"; + model = "Zynq Zed Development Board"; compatible = "xlnx,zynq-zed", "xlnx,zynq-7000"; aliases { + ethernet0 = &gem0; serial0 = &uart1; }; memory { device_type = "memory"; - reg = <0 0x20000000>; + reg = <0x0 0x20000000>; }; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; }; diff --git a/arch/arm/dts/zynq-zybo.dts b/arch/arm/dts/zynq-zybo.dts index 20e0386..10f7815 100644 --- a/arch/arm/dts/zynq-zybo.dts +++ b/arch/arm/dts/zynq-zybo.dts @@ -1,7 +1,8 @@ /* * Digilent ZYBO board DTS * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2011 - 2015 Xilinx + * Copyright (C) 2012 National Instruments Corp. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,15 +10,44 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZYBO Board"; - compatible = "xlnx,zynq-zybo", "xlnx,zynq-7000"; + model = "Zynq ZYBO Development Board"; + compatible = "digilent,zynq-zybo", "xlnx,zynq-7000"; aliases { + ethernet0 = &gem0; serial0 = &uart1; }; memory { device_type = "memory"; - reg = <0 0x20000000>; + reg = <0x0 0x20000000>; }; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + +}; + +&clkc { + ps-clk-frequency = <50000000>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; }; diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index e5c0b0d..47962da 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -33,4 +33,15 @@ #define AM4372_BOARD_VERSION_END SRAM_SCRATCH_SPACE_ADDR + 0x14 #define QSPI_BASE 0x47900000 #endif + +/* Boot parameters */ +#ifndef __ASSEMBLY__ +struct omap_boot_parameters { + unsigned int reserved; + unsigned int boot_device_descriptor; + unsigned char boot_device; + unsigned char reset_reason; +}; +#endif + #endif diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index e756418..4ed8597 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -7,51 +7,65 @@ #ifndef _ASM_ARCH_SPL_H_ #define _ASM_ARCH_SPL_H_ -#if defined(CONFIG_TI816X) -#define BOOT_DEVICE_XIP 2 -#define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_MMC1 6 -#define BOOT_DEVICE_MMC2 5 +#define BOOT_DEVICE_NONE 0x00 +#define BOOT_DEVICE_MMC2_2 0xFF + +#if defined(CONFIG_TI814X) +#define BOOT_DEVICE_XIP 0x01 +#define BOOT_DEVICE_XIPWAIT 0x02 +#define BOOT_DEVICE_NAND 0x05 +#define BOOT_DEVICE_NAND_I2C 0x06 +#define BOOT_DEVICE_MMC2 0x08 /* ROM only supports 2nd instance. */ +#define BOOT_DEVICE_MMC1 0x09 +#define BOOT_DEVICE_SPI 0x15 +#define BOOT_DEVICE_UART 0x41 +#define BOOT_DEVICE_USBETH 0x44 +#define BOOT_DEVICE_CPGMAC 0x46 + +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 +#elif defined(CONFIG_TI816X) +#define BOOT_DEVICE_XIP 0x01 +#define BOOT_DEVICE_XIPWAIT 0x02 +#define BOOT_DEVICE_NAND 0x03 +#define BOOT_DEVICE_ONENAD 0x04 +#define BOOT_DEVICE_MMC2 0x05 /* ROM only supports 2nd instance. */ +#define BOOT_DEVICE_MMC1 0x06 #define BOOT_DEVICE_UART 0x43 -#elif defined(CONFIG_AM43XX) -#define BOOT_DEVICE_NOR 1 -#define BOOT_DEVICE_NAND 5 -#define BOOT_DEVICE_MMC1 7 -#define BOOT_DEVICE_MMC2 8 -#define BOOT_DEVICE_SPI 10 -#define BOOT_DEVICE_USB 13 -#define BOOT_DEVICE_UART 65 -#define BOOT_DEVICE_CPGMAC 71 -#else -#define BOOT_DEVICE_XIP 2 -#define BOOT_DEVICE_NAND 5 -#define BOOT_DEVICE_NAND_I2C 6 -#if defined(CONFIG_AM33XX) -#define BOOT_DEVICE_MMC1 8 -#define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ -#elif defined(CONFIG_TI814X) -#define BOOT_DEVICE_MMC1 9 -#define BOOT_DEVICE_MMC2 8 /* ROM only supports 2nd instance */ -#endif -#define BOOT_DEVICE_SPI 11 -#define BOOT_DEVICE_UART 65 -#define BOOT_DEVICE_USBETH 68 -#define BOOT_DEVICE_CPGMAC 70 -#endif -#define BOOT_DEVICE_MMC2_2 0xFF +#define BOOT_DEVICE_USB 0x45 -#if defined(CONFIG_AM33XX) -#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 +#elif defined(CONFIG_AM33XX) +#define BOOT_DEVICE_XIP 0x01 +#define BOOT_DEVICE_XIPWAIT 0x02 +#define BOOT_DEVICE_NAND 0x05 +#define BOOT_DEVICE_NAND_I2C 0x06 +#define BOOT_DEVICE_MMC1 0x08 +#define BOOT_DEVICE_MMC2 0x09 +#define BOOT_DEVICE_SPI 0x15 +#define BOOT_DEVICE_UART 0x41 +#define BOOT_DEVICE_USBETH 0x44 +#define BOOT_DEVICE_CPGMAC 0x46 + +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 #elif defined(CONFIG_AM43XX) -#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define BOOT_DEVICE_NOR 0x01 +#define BOOT_DEVICE_NAND 0x05 +#define BOOT_DEVICE_MMC1 0x07 +#define BOOT_DEVICE_MMC2 0x08 +#define BOOT_DEVICE_SPI 0x0A +#define BOOT_DEVICE_UART 0x41 +#define BOOT_DEVICE_USB 0x45 +#define BOOT_DEVICE_CPGMAC 0x47 + +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 #ifdef CONFIG_SPL_USB_SUPPORT -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_USB +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_USB #else -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 #endif -#elif defined(CONFIG_TI81XX) -#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 #endif + #endif diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 7eacf27..91b614a 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -11,7 +11,6 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ #include <linux/mtd/omap_gpmc.h> -#include <asm/ti-common/sys_proto.h> #include <asm/arch/cpu.h> u32 get_cpu_rev(void); diff --git a/arch/arm/include/asm/arch-armv7/generictimer.h b/arch/arm/include/asm/arch-armv7/generictimer.h new file mode 100644 index 0000000..f402686 --- /dev/null +++ b/arch/arm/include/asm/arch-armv7/generictimer.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2013 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * Based on code by Carl van Schaik <carl@ok-labs.com>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _GENERICTIMER_H_ +#define _GENERICTIMER_H_ + +#ifdef __ASSEMBLY__ + +/* + * This macro provide a physical timer that can be used for delay in the code. + * The macro is moved from sunxi/psci_sun7i.S + * + * reg: is used in this macro. + * ticks: The freq is based on generic timer. + */ +.macro timer_wait reg, ticks + movw \reg, #(\ticks & 0xffff) + movt \reg, #(\ticks >> 16) + mcr p15, 0, \reg, c14, c2, 0 + isb + mov \reg, #3 + mcr p15, 0, \reg, c14, c2, 1 +1 : isb + mrc p15, 0, \reg, c14, c2, 1 + ands \reg, \reg, #4 + bne 1b + mov \reg, #0 + mcr p15, 0, \reg, c14, c2, 1 + isb +.endm + +#endif /* __ASSEMBLY__ */ + +#endif /* _GENERICTIMER_H_ */ diff --git a/arch/arm/include/asm/arch-bcm281xx/sysmap.h b/arch/arm/include/asm/arch-bcm281xx/sysmap.h index 93ebf34..dbcc88c 100644 --- a/arch/arm/include/asm/arch-bcm281xx/sysmap.h +++ b/arch/arm/include/asm/arch-bcm281xx/sysmap.h @@ -27,4 +27,11 @@ #define SECWD2_BASE_ADDR 0x35002f40 #define TIMER_BASE_ADDR 0x3e00d000 +#define HSOTG_DCTL_OFFSET 0x00000804 +#define HSOTG_DCTL_SFTDISCON_MASK 0x00000002 + +#define HSOTG_CTRL_PHY_P1CTL_OFFSET 0x00000008 +#define HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK 0x00000002 +#define HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK 0x00000001 + #endif diff --git a/arch/arm/include/asm/arch-fsl-lsch3/clock.h b/arch/arm/include/asm/arch-fsl-lsch3/clock.h index 831af0b..62bc53c 100644 --- a/arch/arm/include/asm/arch-fsl-lsch3/clock.h +++ b/arch/arm/include/asm/arch-fsl-lsch3/clock.h @@ -16,6 +16,7 @@ enum mxc_clock { MXC_UART_CLK, MXC_ESDHC_CLK, MXC_I2C_CLK, + MXC_DSPI_CLK, }; unsigned int mxc_get_clock(enum mxc_clock clk); diff --git a/arch/arm/include/asm/arch-fsl-lsch3/config.h b/arch/arm/include/asm/arch-fsl-lsch3/config.h index ca8d38c..8675e91 100644 --- a/arch/arm/include/asm/arch-fsl-lsch3/config.h +++ b/arch/arm/include/asm/arch-fsl-lsch3/config.h @@ -137,6 +137,8 @@ #define DCFG_PORSR1 0x000 #define DCFG_PORSR1_RCW_SRC 0xff800000 #define DCFG_PORSR1_RCW_SRC_NOR 0x12f00000 +#define DCFG_RCWSR13 0x130 +#define DCFG_RCWSR13_DSPI (0 << 8) #define DCFG_DCSR_BASE 0X700100000ULL #define DCFG_DCSR_PORCR1 0x000 diff --git a/arch/arm/include/asm/arch-fsl-lsch3/fdt.h b/arch/arm/include/asm/arch-fsl-lsch3/fdt.h new file mode 100644 index 0000000..21d20fb --- /dev/null +++ b/arch/arm/include/asm/arch-fsl-lsch3/fdt.h @@ -0,0 +1,10 @@ +/* + * Copyright 2015 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +void alloc_stream_ids(int start_id, int count, u32 *stream_ids, int max_cnt); +void append_mmu_masters(void *blob, const char *smmu_path, + const char *master_name, u32 *stream_ids, int count); +void fdt_fixup_smmu_pcie(void *blob); diff --git a/arch/arm/include/asm/arch-fsl-lsch3/ls2085a_stream_id.h b/arch/arm/include/asm/arch-fsl-lsch3/ls2085a_stream_id.h new file mode 100644 index 0000000..5c94530 --- /dev/null +++ b/arch/arm/include/asm/arch-fsl-lsch3/ls2085a_stream_id.h @@ -0,0 +1,64 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ +#ifndef __FSL_STREAM_ID_H +#define __FSL_STREAM_ID_H + +/* Stream IDs on ls2085a devices are not hardwired and are + * programmed by sw. There are a limited number of stream IDs + * available, and the partitioning of them is scenario dependent. + * This header defines the partitioning between legacy, PCI, + * and DPAA2 devices. + * + * This partitiong can be customized in this file depending + * on the specific hardware config-- e.g. perhaps not all + * PEX controllers are in use. + * + * On LS2085 stream IDs are programmed in AMQ registers (32-bits) for + * each of the different bus masters. The relationship between + * the AMQ registers and stream IDs is defined in the table below: + * AMQ bit streamID bit + * --------------------------- + * PL[18] 9 + * BMT[17] 8 + * VA[16] 7 + * [15] - + * ICID[14:7] - + * ICID[6:0] 6-0 + * ---------------------------- + */ + +#define AMQ_PL_MASK (0x1 << 18) /* priviledge bit */ +#define AMQ_BMT_MASK (0x1 << 17) /* bypass bit */ + +#define FSL_INVALID_STREAM_ID 0 + +#define FSL_BYPASS_AMQ (AMQ_PL_MASK | AMQ_BMT_MASK) + +/* legacy devices */ +#define FSL_USB1_STREAM_ID 1 +#define FSL_USB2_STREAM_ID 2 +#define FSL_SDMMC_STREAM_ID 3 +#define FSL_SATA1_STREAM_ID 4 +#define FSL_SATA2_STREAM_ID 5 +#define FSL_DMA_STREAM_ID 6 + +/* PCI - programmed in PEXn_LUT by OS */ +/* 4 IDs per controller */ +#define FSL_PEX1_STREAM_ID_START 7 +#define FSL_PEX1_STREAM_ID_END 10 +#define FSL_PEX2_STREAM_ID_START 11 +#define FSL_PEX2_STREAM_ID_END 14 +#define FSL_PEX3_STREAM_ID_START 15 +#define FSL_PEX3_STREAM_ID_END 18 +#define FSL_PEX4_STREAM_ID_START 19 +#define FSL_PEX4_STREAM_ID_END 22 + +/* DPAA2 - set in MC DPC and alloced by MC */ +#define FSL_DPAA2_STREAM_ID_START 23 +#define FSL_DPAA2_STREAM_ID_END 63 + +#endif diff --git a/arch/arm/include/asm/arch-fsl-lsch3/soc.h b/arch/arm/include/asm/arch-fsl-lsch3/soc.h index 16b723d..9a29272 100644 --- a/arch/arm/include/asm/arch-fsl-lsch3/soc.h +++ b/arch/arm/include/asm/arch-fsl-lsch3/soc.h @@ -4,5 +4,25 @@ * SPDX-License-Identifier: GPL-2.0+ */ +struct cpu_type { + char name[15]; + u32 soc_ver; + u32 num_cores; +}; + +#define CPU_TYPE_ENTRY(n, v, nc) \ + { .name = #n, .soc_ver = SVR_##v, .num_cores = (nc)} + +#define SVR_WO_E 0xFFFFFE +#define SVR_LS2045 0x870120 +#define SVR_LS2080 0x870110 +#define SVR_LS2085 0x870100 + +#define SVR_MAJ(svr) (((svr) >> 4) & 0xf) +#define SVR_MIN(svr) (((svr) >> 0) & 0xf) +#define SVR_SOC_VER(svr) (((svr) >> 8) & SVR_WO_E) +#define IS_E_PROCESSOR(svr) (!((svr >> 8) & 0x1)) + void fsl_lsch3_early_init_f(void); +void cpu_name(char *name); diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index 4dc528b..c55cdef 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -35,6 +35,7 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500) #define CONFIG_SYS_DCU_ADDR (CONFIG_SYS_IMMR + 0x01ce0000) +#define CONFIG_SYS_LS102XA_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000) #define CONFIG_SYS_LS102XA_USB1_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_LS102XA_USB1_OFFSET) diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index ee547fb..d34044a 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -149,6 +149,7 @@ struct ccsr_gur { #define SCFG_ETSECCMCR_GE1_CLK125 0x08000000 #define SCFG_PIXCLKCR_PXCKEN 0x80000000 #define SCFG_QSPI_CLKSEL 0xc0100000 +#define SCFG_ENDIANCR_LE 0x80000000 /* Supplemental Configuration Unit */ struct ccsr_scfg { @@ -207,7 +208,7 @@ struct ccsr_scfg { u32 qos2; u32 qos3; u32 cci_cfg; - u32 resv8[1]; + u32 endiancr; u32 etsecdmamcr; u32 usb3prm3cr; u32 resv9[1]; @@ -395,4 +396,5 @@ struct ccsr_cci400 { } pcounter[4]; /* Performance Counter */ u8 res_e004[0x10000 - 0xe004]; }; + #endif /* __ASM_ARCH_LS102XA_IMMAP_H_ */ diff --git a/arch/arm/include/asm/arch-omap3/omap.h b/arch/arm/include/asm/arch-omap3/omap.h index 194b93b..537d13b 100644 --- a/arch/arm/include/asm/arch-omap3/omap.h +++ b/arch/arm/include/asm/arch-omap3/omap.h @@ -142,6 +142,7 @@ struct gpio { #define NON_SECURE_SRAM_START 0x40208000 /* Works for GP & EMU */ #define NON_SECURE_SRAM_END 0x40210000 +#define SRAM_SCRATCH_SPACE_ADDR 0x4020E000 #define LOW_LEVEL_SRAM_STACK 0x4020FFFC @@ -245,4 +246,16 @@ struct gpio { /* ABB tranxdone mask */ #define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26) +/* Boot parameters */ +#ifndef __ASSEMBLY__ +struct omap_boot_parameters { + unsigned int boot_message; + unsigned char boot_device; + unsigned char reserved; + unsigned char reset_reason; + unsigned char ch_flags; + unsigned int boot_device_descriptor; +}; +#endif + #endif diff --git a/arch/arm/include/asm/arch-omap3/spl.h b/arch/arm/include/asm/arch-omap3/spl.h index 8350532..a31b4ea 100644 --- a/arch/arm/include/asm/arch-omap3/spl.h +++ b/arch/arm/include/asm/arch-omap3/spl.h @@ -7,14 +7,16 @@ #ifndef _ASM_ARCH_SPL_H_ #define _ASM_ARCH_SPL_H_ -#define BOOT_DEVICE_NONE 0 -#define BOOT_DEVICE_XIP 1 -#define BOOT_DEVICE_NAND 2 -#define BOOT_DEVICE_ONENAND 3 -#define BOOT_DEVICE_MMC2 5 /*emmc*/ -#define BOOT_DEVICE_MMC1 6 -#define BOOT_DEVICE_XIPWAIT 7 -#define BOOT_DEVICE_MMC2_2 0xFF +#define BOOT_DEVICE_NONE 0x00 +#define BOOT_DEVICE_XIP 0x01 +#define BOOT_DEVICE_NAND 0x02 +#define BOOT_DEVICE_ONENAND 0x03 +#define BOOT_DEVICE_MMC2 0x05 +#define BOOT_DEVICE_MMC1 0x06 +#define BOOT_DEVICE_XIPWAIT 0x07 +#define BOOT_DEVICE_MMC2_2 0x08 +#define BOOT_DEVICE_UART 0x10 +#define BOOT_DEVICE_USB 0x11 #define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 #define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index 3e45ce1..94f29fd 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -52,7 +52,6 @@ void set_muxconf_regs(void); u32 get_cpu_family(void); u32 get_cpu_rev(void); u32 get_sku_id(void); -u32 get_sysboot_value(void); u32 is_gpmc_muxed(void); u32 get_gpmc0_type(void); u32 get_gpmc0_width(void); @@ -75,4 +74,6 @@ void get_dieid(u32 *id); void do_omap3_emu_romcode_call(u32 service_id, u32 parameters); void omap3_set_aux_cr_secure(u32 acr); u32 warm_reset(void); + +void save_omap_boot_params(void); #endif diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index d43dc26..12b1a09 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -124,4 +124,15 @@ struct s32ktimer { /* ABB tranxdone mask */ #define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7) +/* Boot parameters */ +#ifndef __ASSEMBLY__ +struct omap_boot_parameters { + unsigned int boot_message; + unsigned int boot_device_descriptor; + unsigned char boot_device; + unsigned char reset_reason; + unsigned char ch_flags; +}; +#endif + #endif diff --git a/arch/arm/include/asm/arch-omap4/spl.h b/arch/arm/include/asm/arch-omap4/spl.h index fb842a2..bace92d 100644 --- a/arch/arm/include/asm/arch-omap4/spl.h +++ b/arch/arm/include/asm/arch-omap4/spl.h @@ -7,15 +7,17 @@ #ifndef _ASM_ARCH_SPL_H_ #define _ASM_ARCH_SPL_H_ -#define BOOT_DEVICE_NONE 0 -#define BOOT_DEVICE_XIP 1 -#define BOOT_DEVICE_XIPWAIT 2 -#define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_ONENAND 4 -#define BOOT_DEVICE_MMC1 5 -#define BOOT_DEVICE_MMC2 6 -#define BOOT_DEVICE_MMC2_2 0xFF +#define BOOT_DEVICE_NONE 0x00 +#define BOOT_DEVICE_XIP 0x01 +#define BOOT_DEVICE_XIPWAIT 0x02 +#define BOOT_DEVICE_NAND 0x03 +#define BOOT_DEVICE_ONENAND 0x04 +#define BOOT_DEVICE_MMC1 0x05 +#define BOOT_DEVICE_MMC2 0x06 +#define BOOT_DEVICE_MMC2_2 0x07 +#define BOOT_DEVICE_UART 0x43 +#define BOOT_DEVICE_USB 0x45 #define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2_2 #endif diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 68c6d6d..524fae4 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -235,4 +235,16 @@ struct ctrl_ioregs { }; #endif /* __ASSEMBLY__ */ + +/* Boot parameters */ +#ifndef __ASSEMBLY__ +struct omap_boot_parameters { + unsigned int boot_message; + unsigned int boot_device_descriptor; + unsigned char boot_device; + unsigned char reset_reason; + unsigned char ch_flags; +}; +#endif + #endif diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h index f707998..468ff5a 100644 --- a/arch/arm/include/asm/arch-omap5/spl.h +++ b/arch/arm/include/asm/arch-omap5/spl.h @@ -7,17 +7,20 @@ #ifndef _ASM_ARCH_SPL_H_ #define _ASM_ARCH_SPL_H_ -#define BOOT_DEVICE_NONE 0 -#define BOOT_DEVICE_XIP 1 -#define BOOT_DEVICE_XIPWAIT 2 -#define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_ONENAND 4 -#define BOOT_DEVICE_MMC1 5 -#define BOOT_DEVICE_MMC2 6 -#define BOOT_DEVICE_MMC2_2 7 -#define BOOT_DEVICE_SATA 9 -#define BOOT_DEVICE_SPI 10 +#define BOOT_DEVICE_NONE 0x00 +#define BOOT_DEVICE_XIP 0x01 +#define BOOT_DEVICE_XIPWAIT 0x02 +#define BOOT_DEVICE_NAND 0x03 +#define BOOT_DEVICE_ONENAND 0x04 +#define BOOT_DEVICE_MMC1 0x05 +#define BOOT_DEVICE_MMC2 0x06 +#define BOOT_DEVICE_MMC2_2 0x07 +#define BOOT_DEVICE_SATA 0x09 +#define BOOT_DEVICE_SPI 0x0A +#define BOOT_DEVICE_QSPI_1 0x0A +#define BOOT_DEVICE_QSPI_4 0x0B #define BOOT_DEVICE_UART 0x43 +#define BOOT_DEVICE_USB 0x45 #define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 #define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2_2 diff --git a/arch/arm/include/asm/arch-stm32f4/stm32.h b/arch/arm/include/asm/arch-stm32f4/stm32.h index a9f88db..3ed3801 100644 --- a/arch/arm/include/asm/arch-stm32f4/stm32.h +++ b/arch/arm/include/asm/arch-stm32f4/stm32.h @@ -14,6 +14,7 @@ /* * Peripheral memory map */ +#define STM32_SYSMEM_BASE 0x1FFF0000 #define STM32_PERIPH_BASE 0x40000000 #define STM32_APB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00000000) #define STM32_APB2PERIPH_BASE (STM32_PERIPH_BASE + 0x00010000) @@ -25,6 +26,12 @@ /* * Register maps */ +struct stm32_u_id_regs { + u32 u_id_low; + u32 u_id_mid; + u32 u_id_high; +}; + struct stm32_rcc_regs { u32 cr; /* RCC clock control */ u32 pllcfgr; /* RCC PLL configuration */ @@ -78,6 +85,9 @@ struct stm32_flash_regs { /* * Registers access macros */ +#define STM32_U_ID_BASE (STM32_SYSMEM_BASE + 0x7A10) +#define STM32_U_ID ((struct stm32_u_id_regs *)STM32_U_ID_BASE) + #define STM32_RCC_BASE (STM32_AHB1PERIPH_BASE + 0x3800) #define STM32_RCC ((struct stm32_rcc_regs *)STM32_RCC_BASE) diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h index cb52e64..3da360b 100644 --- a/arch/arm/include/asm/arch-sunxi/mmc.h +++ b/arch/arm/include/asm/arch-sunxi/mmc.h @@ -127,4 +127,5 @@ struct sunxi_mmc { #define SUNXI_MMC_COMMON_RESET (1 << 18) struct mmc *sunxi_mmc_init(int sdc_no); +int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc); #endif /* _SUNXI_MMC_H */ diff --git a/arch/arm/include/asm/arch-sunxi/usb_phy.h b/arch/arm/include/asm/arch-sunxi/usb_phy.h index b7b831e..17d31b8 100644 --- a/arch/arm/include/asm/arch-sunxi/usb_phy.h +++ b/arch/arm/include/asm/arch-sunxi/usb_phy.h @@ -17,4 +17,12 @@ void sunxi_usb_phy_exit(int index); void sunxi_usb_phy_power_on(int index); void sunxi_usb_phy_power_off(int index); int sunxi_usb_phy_vbus_detect(int index); +int sunxi_usb_phy_id_detect(int index); void sunxi_usb_phy_enable_squelch_detect(int index, int enable); + +/* Not really phy related, but we have to declare this somewhere ... */ +#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET) +void sunxi_musb_board_init(void); +#else +#define sunxi_musb_board_init() +#endif diff --git a/arch/arm/include/asm/arch-tegra/ap.h b/arch/arm/include/asm/arch-tegra/ap.h index ca40e4e..76773b7 100644 --- a/arch/arm/include/asm/arch-tegra/ap.h +++ b/arch/arm/include/asm/arch-tegra/ap.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010-2011 + * (C) Copyright 2010-2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -24,8 +24,6 @@ #define PG_UP_TAG_0_PID_CPU 0x55555555 /* CPU aka "a9" aka "mpcore" */ #define PG_UP_TAG_0 0x0 -#define CORESIGHT_UNLOCK 0xC5ACCE55; - /* AP base physical address of internal SRAM */ #define NV_PA_BASE_SRAM 0x40000000 @@ -66,7 +64,7 @@ int tegra_get_sku_info(void); /* Do any chip-specific cache config */ void config_cache(void); -#if defined(CONFIG_TEGRA124) +#if defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210) /* Do chip-specific vpr config */ void config_vpr(void); #else diff --git a/arch/arm/include/asm/arch-tegra/clk_rst.h b/arch/arm/include/asm/arch-tegra/clk_rst.h index de50e08..f690260 100644 --- a/arch/arm/include/asm/arch-tegra/clk_rst.h +++ b/arch/arm/include/asm/arch-tegra/clk_rst.h @@ -48,6 +48,7 @@ enum { TEGRA_CLK_REGS_VW = 2, /* Number of clock enable regs V/W */ TEGRA_CLK_SOURCES_VW = 32, /* Number of ppl clock sources V/W */ TEGRA_CLK_SOURCES_X = 32, /* Number of ppl clock sources X */ + TEGRA_CLK_SOURCES_Y = 18, /* Number of ppl clock sources Y */ }; /* Clock/Reset Controller (CLK_RST_CONTROLLER_) regs */ @@ -94,7 +95,15 @@ struct clk_rst_ctlr { uint crc_rst_dev_x_set; /* _RST_DEV_X_SET_0, 0x290 */ uint crc_rst_dev_x_clr; /* _RST_DEV_X_CLR_0, 0x294 */ - uint crc_reserved21[23]; /* _reserved_21, 0x298-2f0 */ + uint crc_clk_out_enb_y; /* _CLK_OUT_ENB_Y_0, 0x298 */ + uint crc_clk_enb_y_set; /* _CLK_ENB_Y_SET_0, 0x29c */ + uint crc_clk_enb_y_clr; /* _CLK_ENB_Y_CLR_0, 0x2a0 */ + + uint crc_rst_devices_y; /* _RST_DEVICES_Y_0, 0x2a4 */ + uint crc_rst_dev_y_set; /* _RST_DEV_Y_SET_0, 0x2a8 */ + uint crc_rst_dev_y_clr; /* _RST_DEV_Y_CLR_0, 0x2ac */ + + uint crc_reserved21[17]; /* _reserved_21, 0x2b0-2f0 */ uint crc_dfll_base; /* _DFLL_BASE_0, 0x2f4 */ @@ -136,7 +145,7 @@ struct clk_rst_ctlr { struct clk_set_clr crc_rst_dev_ex_vw[TEGRA_CLK_REGS_VW]; /* _CLK_ENB_V/W_CLR_0 0x440 ~ 0x44c */ struct clk_set_clr crc_clk_enb_ex_vw[TEGRA_CLK_REGS_VW]; - /* Additional (T114) registers */ + /* Additional (T114+) registers */ uint crc_rst_cpug_cmplx_set; /* _RST_CPUG_CMPLX_SET_0, 0x450 */ uint crc_rst_cpug_cmplx_clr; /* _RST_CPUG_CMPLX_CLR_0, 0x454 */ uint crc_rst_cpulp_cmplx_set; /* _RST_CPULP_CMPLX_SET_0, 0x458 */ @@ -207,9 +216,18 @@ struct clk_rst_ctlr { u32 _rsv32_1[7]; /* 0x574-58c */ struct clk_pll_simple plldp; /* _PLLDP_BASE, 0x590 _PLLDP_MISC */ u32 crc_plldp_ss_cfg; /* _PLLDP_SS_CFG, 0x598 */ - u32 _rsrv32_2[25]; - /* Tegra124 */ - uint crc_clk_src_x[TEGRA_CLK_SOURCES_X]; /* XUSB, etc, 0x600-0x678 */ + + /* Tegra124+ - skip to 0x600 here for new CLK_SOURCE_ regs */ + uint _rsrv32_2[25]; /* _0x59C - 0x5FC */ + uint crc_clk_src_x[TEGRA_CLK_SOURCES_X]; /* XUSB, etc, 0x600-0x67C */ + + /* Tegra210 - skip to 0x694 here for new CLK_SOURCE_ regs */ + uint crc_reserved61[5]; /* _reserved_61, 0x680 - 0x690 */ + /* + * NOTE: PLLA1 regs are in the middle of this Y region. Break this in + * two later if PLLA1 is needed, but for now this is cleaner. + */ + uint crc_clk_src_y[TEGRA_CLK_SOURCES_Y]; /* SPARE1, etc, 0x694-0x6D8 */ }; /* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_0 */ @@ -233,6 +251,8 @@ struct clk_rst_ctlr { #define PLL_DIVP_SHIFT 20 #define PLL_DIVP_MASK (7U << PLL_DIVP_SHIFT) +/* Special case for T210 PLLU DIVP */ +#define PLLU_DIVP_SHIFT 16 #define PLL_DIVN_SHIFT 8 #define PLL_DIVN_MASK (0x3ffU << PLL_DIVN_SHIFT) @@ -261,6 +281,12 @@ struct clk_rst_ctlr { #define PLL_LFCON_SHIFT 4 #define PLL_LFCON_MASK (15U << PLL_LFCON_SHIFT) +/* CPCON/LFCON replaced by KCP/KVCO in T210 PLLU */ +#define PLLU_KVCO_SHIFT 24 +#define PLLU_KVCO_MASK (3U << PLLU_KVCO_SHIFT) +#define PLLU_KCP_SHIFT 25 +#define PLLU_KCP_MASK (1U << PLLU_KCP_SHIFT) + #define PLLU_VCO_FREQ_SHIFT 20 #define PLLU_VCO_FREQ_MASK (1U << PLLU_VCO_FREQ_SHIFT) diff --git a/arch/arm/include/asm/arch-tegra/gp_padctrl.h b/arch/arm/include/asm/arch-tegra/gp_padctrl.h index 7a86acb..695f3e6 100644 --- a/arch/arm/include/asm/arch-tegra/gp_padctrl.h +++ b/arch/arm/include/asm/arch-tegra/gp_padctrl.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010-2012 + * (C) Copyright 2010-2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -21,5 +21,6 @@ #define CHIPID_TEGRA30 0x30 #define CHIPID_TEGRA114 0x35 #define CHIPID_TEGRA124 0x40 +#define CHIPID_TEGRA210 0x21 #endif /* _TEGRA_GP_PADCTRL_H_ */ diff --git a/arch/arm/include/asm/arch-tegra/pmc.h b/arch/arm/include/asm/arch-tegra/pmc.h index 1dd3154..66c0879 100644 --- a/arch/arm/include/asm/arch-tegra/pmc.h +++ b/arch/arm/include/asm/arch-tegra/pmc.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010,2011,2014 + * (C) Copyright 2010-2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -294,6 +294,7 @@ struct pmc_ctlr { #define CRAIL 0 #define CE0 14 #define C0NC 15 +#define SOR 17 #define PMC_XOFS_SHIFT 1 #define PMC_XOFS_MASK (0x3F << PMC_XOFS_SHIFT) @@ -303,7 +304,7 @@ struct pmc_ctlr { #define TIMER_MULT_MASK (3 << TIMER_MULT_SHIFT) #define TIMER_MULT_CPU_SHIFT 2 #define TIMER_MULT_CPU_MASK (3 << TIMER_MULT_CPU_SHIFT) -#elif defined(CONFIG_TEGRA124) +#elif defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210) #define TIMER_MULT_SHIFT 0 #define TIMER_MULT_MASK (7 << TIMER_MULT_SHIFT) #define TIMER_MULT_CPU_SHIFT 3 @@ -314,7 +315,7 @@ struct pmc_ctlr { #define MULT_2 1 #define MULT_4 2 #define MULT_8 3 -#if defined(CONFIG_TEGRA124) +#if defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210) #define MULT_16 4 #endif diff --git a/arch/arm/include/asm/arch-tegra/tegra.h b/arch/arm/include/asm/arch-tegra/tegra.h index d63af0e..b6c7cab 100644 --- a/arch/arm/include/asm/arch-tegra/tegra.h +++ b/arch/arm/include/asm/arch-tegra/tegra.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010,2011 + * (C) Copyright 2010-2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -74,6 +74,7 @@ enum { SKU_ID_T114_ENG = 0x00, /* Dalmore value, unfused */ SKU_ID_T114_1 = 0x01, SKU_ID_T124_ENG = 0x00, /* Venice2 value, unfused */ + SKU_ID_T210_ENG = 0x00, /* unfused value TBD */ }; /* @@ -88,6 +89,7 @@ enum { TEGRA_SOC_T30, TEGRA_SOC_T114, TEGRA_SOC_T124, + TEGRA_SOC_T210, TEGRA_SOC_CNT, TEGRA_SOC_UNKNOWN = -1, diff --git a/arch/arm/include/asm/arch-tegra/usb.h b/arch/arm/include/asm/arch-tegra/usb.h index c817088..f400c01 100644 --- a/arch/arm/include/asm/arch-tegra/usb.h +++ b/arch/arm/include/asm/arch-tegra/usb.h @@ -266,6 +266,9 @@ struct usb_ctlr { /* USBx_UTMIP_BIAS_CFG1_0 */ #define UTMIP_FORCE_PDTRK_POWERDOWN 1 +#define UTMIP_BIAS_DEBOUNCE_TIMESCALE_SHIFT 8 +#define UTMIP_BIAS_DEBOUNCE_TIMESCALE_MASK \ + (0x3f << UTMIP_BIAS_DEBOUNCE_TIMESCALE_SHIFT) #define UTMIP_BIAS_PDTRK_COUNT_SHIFT 3 #define UTMIP_BIAS_PDTRK_COUNT_MASK \ (0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT) diff --git a/arch/arm/include/asm/arch-tegra210/ahb.h b/arch/arm/include/asm/arch-tegra210/ahb.h new file mode 100644 index 0000000..3a37af4 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/ahb.h @@ -0,0 +1,91 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_AHB_H_ +#define _TEGRA210_AHB_H_ + +struct ahb_ctlr { + u32 reserved0; /* 00h */ + u32 arbitration_disable; /* _ARBITRATION_DISABLE_0, 04h */ + u32 arbitration_priority_ctrl; /* _ARBITRATION_PRIORITY_CTRL_0,08h */ + u32 arbitration_usr_protect; /* _ARBITRATION_USR_PROTECT_0, 0ch */ + u32 gizmo_ahb_mem; /* _GIZMO_AHB_MEM_0, 10h */ + u32 gizmo_apb_dma; /* _GIZMO_APB_DMA_0, 14h */ + u32 reserved6[2]; /* 18h, 1ch */ + u32 gizmo_usb; /* _GIZMO_USB_0, 20h */ + u32 gizmo_ahb_xbar_bridge; /* _GIZMO_AHB_XBAR_BRIDGE_0, 24h */ + u32 gizmo_cpu_ahb_bridge; /* _GIZMO_CPU_AHB_BRIDGE_0, 28h */ + u32 gizmo_cop_ahb_bridge; /* _GIZMO_COP_AHB_BRIDGE_0, 2ch */ + u32 gizmo_xbar_apb_ctlr; /* _GIZMO_XBAR_APB_CTLR_0, 30h */ + u32 gizmo_vcp_ahb_bridge; /* _GIZMO_VCP_AHB_BRIDGE_0, 34h */ + u32 reserved13[2]; /* 38h, 3ch */ + u32 gizmo_nand; /* _GIZMO_NAND_0, 40h */ + u32 reserved15; /* 44h */ + u32 gizmo_sdmmc4; /* _GIZMO_SDMMC4_0, 48h */ + u32 reserved17; /* 4ch */ + u32 gizmo_se; /* _GIZMO_SE_0, 50h */ + u32 gizmo_tzram; /* _GIZMO_TZRAM_0, 54h */ + u32 reserved20[3]; /* 58h, 5ch, 60h */ + u32 gizmo_bsev; /* _GIZMO_BSEV_0, 64h */ + u32 reserved22[3]; /* 68h, 6ch, 70h */ + u32 gizmo_bsea; /* _GIZMO_BSEA_0, 74h */ + u32 gizmo_nor; /* _GIZMO_NOR_0, 78h */ + u32 gizmo_usb2; /* _GIZMO_USB2_0, 7ch */ + u32 gizmo_usb3; /* _GIZMO_USB3_0, 80h */ + u32 gizmo_sdmmc1; /* _GIZMO_SDMMC1_0, 84h */ + u32 gizmo_sdmmc2; /* _GIZMO_SDMMC2_0, 88h */ + u32 gizmo_sdmmc3; /* _GIZMO_SDMMC3_0, 8ch */ + u32 reserved30[13]; /* 90h ~ c0h */ + u32 ahb_wrq_empty; /* _AHB_WRQ_EMPTY_0, c4h */ + u32 reserved32[5]; /* c8h ~ d8h */ + u32 ahb_mem_prefetch_cfg_x; /* _AHB_MEM_PREFETCH_CFG_X_0, dch */ + u32 arbitration_xbar_ctrl; /* _ARBITRATION_XBAR_CTRL_0, e0h */ + u32 ahb_mem_prefetch_cfg3; /* _AHB_MEM_PREFETCH_CFG3_0, e4h */ + u32 ahb_mem_prefetch_cfg4; /* _AHB_MEM_PREFETCH_CFG3_0, e8h */ + u32 avp_ppcs_rd_coh_status; /* _AVP_PPCS_RD_COH_STATUS_0, ech */ + u32 ahb_mem_prefetch_cfg1; /* _AHB_MEM_PREFETCH_CFG1_0, f0h */ + u32 ahb_mem_prefetch_cfg2; /* _AHB_MEM_PREFETCH_CFG2_0, f4h */ + u32 ahbslvmem_status; /* _AHBSLVMEM_STATUS_0, f8h */ + /* _ARBITRATION_AHB_MEM_WRQUE_MST_ID_0, fch */ + u32 arbitration_ahb_mem_wrque_mst_id; + u32 arbitration_cpu_abort_addr; /* _ARBITRATION_CPU_ABORT_ADDR_0,100h */ + u32 arbitration_cpu_abort_info; /* _ARBITRATION_CPU_ABORT_INFO_0,104h */ + u32 arbitration_cop_abort_addr; /* _ARBITRATION_COP_ABORT_ADDR_0,108h */ + u32 arbitration_cop_abort_info; /* _ARBITRATION_COP_ABORT_INFO_0,10ch */ + u32 reserved46[4]; /* 110h ~ 11ch */ + u32 avpc_mccif_fifoctrl; /* _AVPC_MCCIF_FIFOCTRL_0, 120h */ + u32 timeout_wcoal_avpc; /* _TIMEOUT_WCOAL_AVPC_0, 124h */ + u32 mpcorelp_mccif_fifoctrl; /* _MPCORELP_MCCIF_FIFOCTRL_0, 128h */ + u32 mpcore_mccif_fifoctrl; /* _MPCORE_MCCIF_FIFOCTRL_0, 12ch */ + u32 axicif_fastsync_ctrl; /* AXICIF_FASTSYNC_CTRL_0, 130h */ + u32 axicif_fastsync_statistics; /* _AXICIF_FASTSYNC_STATISTICS_0,134h */ + /* _AXICIF_FASTSYNC0_CPUCLK_TO_MCCLK_0, 138h */ + u32 axicif_fastsync0_cpuclk_to_mcclk; + /* _AXICIF_FASTSYNC1_CPUCLK_TO_MCCLK_0, 13ch */ + u32 axicif_fastsync1_cpuclk_to_mcclk; + /* _AXICIF_FASTSYNC2_CPUCLK_TO_MCCLK_0, 140h */ + u32 axicif_fastsync2_cpuclk_to_mcclk; + /* _AXICIF_FASTSYNC0_MCCLK_TO_CPUCLK_0, 144h */ + u32 axicif_fastsync0_mcclk_to_cpuclk; + /* _AXICIF_FASTSYNC1_MCCLK_TO_CPUCLK_0, 148h */ + u32 axicif_fastsync1_mcclk_to_cpuclk; + /* _AXICIF_FASTSYNC2_MCCLK_TO_CPUCLK_0, 14ch */ + u32 axicif_fastsync2_mcclk_to_cpuclk; +}; + +#define PPSB_STOPCLK_ENABLE (1 << 2) + +#define GIZ_ENABLE_SPLIT (1 << 0) +#define GIZ_ENB_FAST_REARB (1 << 2) +#define GIZ_DONT_SPLIT_AHB_WR (1 << 7) + +#define GIZ_USB_IMMEDIATE (1 << 18) + +/* AHB_ARBITRATION_XBAR_CTRL_0 0xe0 */ +#define ARBITRATION_XBAR_CTRL_PPSB_ENABLE (1 << 2) + +#endif /* _TEGRA210_AHB_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/clock-tables.h b/arch/arm/include/asm/arch-tegra210/clock-tables.h new file mode 100644 index 0000000..b62e070 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/clock-tables.h @@ -0,0 +1,566 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra210 clock PLL tables */ + +#ifndef _TEGRA210_CLOCK_TABLES_H_ +#define _TEGRA210_CLOCK_TABLES_H_ + +/* The PLLs supported by the hardware */ +enum clock_id { + CLOCK_ID_FIRST, + CLOCK_ID_CGENERAL = CLOCK_ID_FIRST, + CLOCK_ID_MEMORY, + CLOCK_ID_PERIPH, + CLOCK_ID_AUDIO, + CLOCK_ID_USB, + CLOCK_ID_DISPLAY, + + /* now the simple ones */ + CLOCK_ID_FIRST_SIMPLE, + CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE, + CLOCK_ID_EPCI, + CLOCK_ID_SFROM32KHZ, + + /* These are the base clocks (inputs to the Tegra SoC) */ + CLOCK_ID_32KHZ, + CLOCK_ID_OSC, + + CLOCK_ID_COUNT, /* number of PLLs */ + + /* + * These are clock IDs that are used in table clock_source[][] + * but will not be assigned as a clock source for any peripheral. + */ + CLOCK_ID_DISPLAY2, + CLOCK_ID_CGENERAL_0, + CLOCK_ID_CGENERAL_1, + CLOCK_ID_CGENERAL2, + CLOCK_ID_CGENERAL3, + CLOCK_ID_CGENERAL4_0, + CLOCK_ID_CGENERAL4_1, + CLOCK_ID_CGENERAL4_2, + CLOCK_ID_MEMORY2, + CLOCK_ID_SRC2, + + CLOCK_ID_NONE = -1, +}; + +/* The clocks supported by the hardware */ +enum periph_id { + PERIPH_ID_FIRST, + + /* Low word: 31:0 (DEVICES_L) */ + PERIPH_ID_CPU = PERIPH_ID_FIRST, + PERIPH_ID_COP, + PERIPH_ID_TRIGSYS, + PERIPH_ID_ISPB, + PERIPH_ID_RESERVED4, + PERIPH_ID_TMR, + PERIPH_ID_UART1, + PERIPH_ID_UART2, + + /* 8 */ + PERIPH_ID_GPIO, + PERIPH_ID_SDMMC2, + PERIPH_ID_SPDIF, + PERIPH_ID_I2S2, + PERIPH_ID_I2C1, + PERIPH_ID_RESERVED13, + PERIPH_ID_SDMMC1, + PERIPH_ID_SDMMC4, + + /* 16 */ + PERIPH_ID_TCW, + PERIPH_ID_PWM, + PERIPH_ID_I2S3, + PERIPH_ID_RESERVED19, + PERIPH_ID_VI, + PERIPH_ID_RESERVED21, + PERIPH_ID_USBD, + PERIPH_ID_ISP, + + /* 24 */ + PERIPH_ID_RESERVED24, + PERIPH_ID_RESERVED25, + PERIPH_ID_DISP2, + PERIPH_ID_DISP1, + PERIPH_ID_HOST1X, + PERIPH_ID_VCP, + PERIPH_ID_I2S1, + PERIPH_ID_CACHE2, + + /* Middle word: 63:32 (DEVICES_H) */ + PERIPH_ID_MEM, + PERIPH_ID_AHBDMA, + PERIPH_ID_APBDMA, + PERIPH_ID_RESERVED35, + PERIPH_ID_RESERVED36, + PERIPH_ID_STAT_MON, + PERIPH_ID_RESERVED38, + PERIPH_ID_FUSE, + + /* 40 */ + PERIPH_ID_KFUSE, + PERIPH_ID_SBC1, + PERIPH_ID_SNOR, + PERIPH_ID_RESERVED43, + PERIPH_ID_SBC2, + PERIPH_ID_XIO, + PERIPH_ID_SBC3, + PERIPH_ID_I2C5, + + /* 48 */ + PERIPH_ID_DSI, + PERIPH_ID_RESERVED49, + PERIPH_ID_HSI, + PERIPH_ID_HDMI, + PERIPH_ID_CSI, + PERIPH_ID_RESERVED53, + PERIPH_ID_I2C2, + PERIPH_ID_UART3, + + /* 56 */ + PERIPH_ID_MIPI_CAL, + PERIPH_ID_EMC, + PERIPH_ID_USB2, + PERIPH_ID_USB3, + PERIPH_ID_RESERVED60, + PERIPH_ID_VDE, + PERIPH_ID_BSEA, + PERIPH_ID_BSEV, + + /* Upper word 95:64 (DEVICES_U) */ + PERIPH_ID_RESERVED64, + PERIPH_ID_UART4, + PERIPH_ID_UART5, + PERIPH_ID_I2C3, + PERIPH_ID_SBC4, + PERIPH_ID_SDMMC3, + PERIPH_ID_PCIE, + PERIPH_ID_OWR, + + /* 72 */ + PERIPH_ID_AFI, + PERIPH_ID_CORESIGHT, + PERIPH_ID_PCIEXCLK, + PERIPH_ID_AVPUCQ, + PERIPH_ID_LA, + PERIPH_ID_TRACECLKIN, + PERIPH_ID_SOC_THERM, + PERIPH_ID_DTV, + + /* 80 */ + PERIPH_ID_RESERVED80, + PERIPH_ID_I2CSLOW, + PERIPH_ID_DSIB, + PERIPH_ID_TSEC, + PERIPH_ID_RESERVED84, + PERIPH_ID_RESERVED85, + PERIPH_ID_RESERVED86, + PERIPH_ID_EMUCIF, + + /* 88 */ + PERIPH_ID_RESERVED88, + PERIPH_ID_XUSB_HOST, + PERIPH_ID_RESERVED90, + PERIPH_ID_MSENC, + PERIPH_ID_RESERVED92, + PERIPH_ID_RESERVED93, + PERIPH_ID_RESERVED94, + PERIPH_ID_XUSB_DEV, + + PERIPH_ID_VW_FIRST, + /* V word: 31:0 */ + PERIPH_ID_CPUG = PERIPH_ID_VW_FIRST, + PERIPH_ID_CPULP, + PERIPH_ID_V_RESERVED2, + PERIPH_ID_MSELECT, + PERIPH_ID_V_RESERVED4, + PERIPH_ID_I2S4, + PERIPH_ID_I2S5, + PERIPH_ID_I2C4, + + /* 104 */ + PERIPH_ID_SBC5, + PERIPH_ID_SBC6, + PERIPH_ID_AHUB, + PERIPH_ID_APB2APE, + PERIPH_ID_V_RESERVED12, + PERIPH_ID_V_RESERVED13, + PERIPH_ID_V_RESERVED14, + PERIPH_ID_HDA2CODEC2X, + + /* 112 */ + PERIPH_ID_ATOMICS, + PERIPH_ID_V_RESERVED17, + PERIPH_ID_V_RESERVED18, + PERIPH_ID_V_RESERVED19, + PERIPH_ID_V_RESERVED20, + PERIPH_ID_V_RESERVED21, + PERIPH_ID_V_RESERVED22, + PERIPH_ID_ACTMON, + + /* 120 */ + PERIPH_ID_EXTPERIPH1, + PERIPH_ID_EXTPERIPH2, + PERIPH_ID_EXTPERIPH3, + PERIPH_ID_OOB, + PERIPH_ID_SATA, + PERIPH_ID_HDA, + PERIPH_ID_V_RESERVED30, + PERIPH_ID_V_RESERVED31, + + /* W word: 31:0 */ + PERIPH_ID_HDA2HDMICODEC, + PERIPH_ID_SATACOLD, + PERIPH_ID_W_RESERVED2, + PERIPH_ID_W_RESERVED3, + PERIPH_ID_W_RESERVED4, + PERIPH_ID_W_RESERVED5, + PERIPH_ID_W_RESERVED6, + PERIPH_ID_W_RESERVED7, + + /* 136 */ + PERIPH_ID_CEC, + PERIPH_ID_W_RESERVED9, + PERIPH_ID_W_RESERVED10, + PERIPH_ID_W_RESERVED11, + PERIPH_ID_W_RESERVED12, + PERIPH_ID_W_RESERVED13, + PERIPH_ID_XUSB_PADCTL, + PERIPH_ID_W_RESERVED15, + + /* 144 */ + PERIPH_ID_W_RESERVED16, + PERIPH_ID_W_RESERVED17, + PERIPH_ID_W_RESERVED18, + PERIPH_ID_W_RESERVED19, + PERIPH_ID_W_RESERVED20, + PERIPH_ID_ENTROPY, + PERIPH_ID_DDS, + PERIPH_ID_W_RESERVED23, + + /* 152 */ + PERIPH_ID_W_RESERVED24, + PERIPH_ID_W_RESERVED25, + PERIPH_ID_W_RESERVED26, + PERIPH_ID_DVFS, + PERIPH_ID_XUSB_SS, + PERIPH_ID_W_RESERVED29, + PERIPH_ID_W_RESERVED30, + PERIPH_ID_W_RESERVED31, + + PERIPH_ID_X_FIRST, + /* X word: 31:0 */ + PERIPH_ID_SPARE = PERIPH_ID_X_FIRST, + PERIPH_ID_X_RESERVED1, + PERIPH_ID_X_RESERVED2, + PERIPH_ID_X_RESERVED3, + PERIPH_ID_CAM_MCLK, + PERIPH_ID_CAM_MCLK2, + PERIPH_ID_I2C6, + PERIPH_ID_X_RESERVED7, + + /* 168 */ + PERIPH_ID_X_RESERVED8, + PERIPH_ID_X_RESERVED9, + PERIPH_ID_X_RESERVED10, + PERIPH_ID_VIM2_CLK, + PERIPH_ID_X_RESERVED12, + PERIPH_ID_X_RESERVED13, + PERIPH_ID_EMC_DLL, + PERIPH_ID_X_RESERVED15, + + /* 176 */ + PERIPH_ID_HDMI_AUDIO, + PERIPH_ID_CLK72MHZ, + PERIPH_ID_VIC, + PERIPH_ID_X_RESERVED19, + PERIPH_ID_X_RESERVED20, + PERIPH_ID_DPAUX, + PERIPH_ID_SOR0, + PERIPH_ID_X_RESERVED23, + + /* 184 */ + PERIPH_ID_GPU, + PERIPH_ID_X_RESERVED25, + PERIPH_ID_X_RESERVED26, + PERIPH_ID_X_RESERVED27, + PERIPH_ID_X_RESERVED28, + PERIPH_ID_X_RESERVED29, + PERIPH_ID_X_RESERVED30, + PERIPH_ID_X_RESERVED31, + + PERIPH_ID_Y_FIRST, + /* Y word: 31:0 (192:223) */ + PERIPH_ID_SPARE1 = PERIPH_ID_Y_FIRST, + PERIPH_ID_Y_RESERVED1, + PERIPH_ID_Y_RESERVED2, + PERIPH_ID_Y_RESERVED3, + PERIPH_ID_Y_RESERVED4, + PERIPH_ID_Y_RESERVED5, + PERIPH_ID_APE, + PERIPH_ID_Y_RESERVED7, + + /* 200 */ + PERIPH_ID_MC_CDPA, + PERIPH_ID_Y_RESERVED9, + PERIPH_ID_Y_RESERVED10, + PERIPH_ID_Y_RESERVED11, + PERIPH_ID_Y_RESERVED12, + PERIPH_ID_PEX_USB_UPHY, + PERIPH_ID_Y_RESERVED14, + PERIPH_ID_Y_RESERVED15, + + /* 208 */ + PERIPH_ID_VI_I2C, + PERIPH_ID_Y_RESERVED17, + PERIPH_ID_Y_RESERVED18, + PERIPH_ID_QSPI, + PERIPH_ID_Y_RESERVED20, + PERIPH_ID_Y_RESERVED21, + PERIPH_ID_Y_RESERVED22, + PERIPH_ID_Y_RESERVED23, + + /* 216 */ + PERIPH_ID_Y_RESERVED24, + PERIPH_ID_Y_RESERVED25, + PERIPH_ID_Y_RESERVED26, + PERIPH_ID_Y_RESERVED27, + PERIPH_ID_Y_RESERVED28, + PERIPH_ID_Y_RESERVED29, + PERIPH_ID_Y_RESERVED30, + PERIPH_ID_Y_RESERVED31, + + PERIPH_ID_COUNT, + PERIPH_ID_NONE = -1, +}; + +enum pll_out_id { + PLL_OUT1, + PLL_OUT2, + PLL_OUT3, + PLL_OUT4 +}; + +/* + * Clock peripheral IDs which sadly don't match up with PERIPH_ID. we want + * callers to use the PERIPH_ID for all access to peripheral clocks to avoid + * confusion bewteen PERIPH_ID_... and PERIPHC_... + * + * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be + * confusing. + */ +enum periphc_internal_id { + /* 0x00 */ + PERIPHC_I2S2, + PERIPHC_I2S3, + PERIPHC_SPDIF_OUT, + PERIPHC_SPDIF_IN, + PERIPHC_PWM, + PERIPHC_05h, + PERIPHC_SBC2, + PERIPHC_SBC3, + + /* 0x08 */ + PERIPHC_08h, + PERIPHC_I2C1, + PERIPHC_I2C5, + PERIPHC_0bh, + PERIPHC_0ch, + PERIPHC_SBC1, + PERIPHC_DISP1, + PERIPHC_DISP2, + + /* 0x10 */ + PERIPHC_10h, + PERIPHC_11h, + PERIPHC_VI, + PERIPHC_13h, + PERIPHC_SDMMC1, + PERIPHC_SDMMC2, + PERIPHC_G3D, + PERIPHC_G2D, + + /* 0x18 */ + PERIPHC_18h, + PERIPHC_SDMMC4, + PERIPHC_VFIR, + PERIPHC_1Bh, + PERIPHC_1Ch, + PERIPHC_HSI, + PERIPHC_UART1, + PERIPHC_UART2, + + /* 0x20 */ + PERIPHC_HOST1X, + PERIPHC_21h, + PERIPHC_22h, + PERIPHC_HDMI, + PERIPHC_24h, + PERIPHC_25h, + PERIPHC_I2C2, + PERIPHC_EMC, + + /* 0x28 */ + PERIPHC_UART3, + PERIPHC_29h, + PERIPHC_VI_SENSOR, + PERIPHC_2bh, + PERIPHC_2ch, + PERIPHC_SBC4, + PERIPHC_I2C3, + PERIPHC_SDMMC3, + + /* 0x30 */ + PERIPHC_UART4, + PERIPHC_UART5, + PERIPHC_VDE, + PERIPHC_OWR, + PERIPHC_NOR, + PERIPHC_CSITE, + PERIPHC_I2S1, + PERIPHC_DTV, + + /* 0x38 */ + PERIPHC_38h, + PERIPHC_39h, + PERIPHC_3ah, + PERIPHC_3bh, + PERIPHC_MSENC, + PERIPHC_TSEC, + PERIPHC_3eh, + PERIPHC_OSC, + + PERIPHC_VW_FIRST, + /* 0x40 */ + PERIPHC_40h = PERIPHC_VW_FIRST, + PERIPHC_MSELECT, + PERIPHC_TSENSOR, + PERIPHC_I2S4, + PERIPHC_I2S5, + PERIPHC_I2C4, + PERIPHC_SBC5, + PERIPHC_SBC6, + + /* 0x48 */ + PERIPHC_AUDIO, + PERIPHC_49h, + PERIPHC_4ah, + PERIPHC_4bh, + PERIPHC_4ch, + PERIPHC_HDA2CODEC2X, + PERIPHC_ACTMON, + PERIPHC_EXTPERIPH1, + + /* 0x50 */ + PERIPHC_EXTPERIPH2, + PERIPHC_EXTPERIPH3, + PERIPHC_52h, + PERIPHC_I2CSLOW, + PERIPHC_SYS, + PERIPHC_55h, + PERIPHC_56h, + PERIPHC_57h, + + /* 0x58 */ + PERIPHC_58h, + PERIPHC_59h, + PERIPHC_5ah, + PERIPHC_5bh, + PERIPHC_SATAOOB, + PERIPHC_SATA, + PERIPHC_HDA, /* 0x428 */ + PERIPHC_5fh, + + PERIPHC_X_FIRST, + /* 0x60 */ + PERIPHC_XUSB_CORE_HOST = PERIPHC_X_FIRST, /* 0x600 */ + PERIPHC_XUSB_FALCON, + PERIPHC_XUSB_FS, + PERIPHC_XUSB_CORE_DEV, + PERIPHC_XUSB_SS, + PERIPHC_CILAB, + PERIPHC_CILCD, + PERIPHC_CILE, + + /* 0x68 */ + PERIPHC_DSIA_LP, + PERIPHC_DSIB_LP, + PERIPHC_ENTROPY, + PERIPHC_DVFS_REF, + PERIPHC_DVFS_SOC, + PERIPHC_TRACECLKIN, + PERIPHC_6Eh, + PERIPHC_6Fh, + + /* 0x70 */ + PERIPHC_EMC_LATENCY, + PERIPHC_SOC_THERM, + PERIPHC_72h, + PERIPHC_73h, + PERIPHC_74h, + PERIPHC_75h, + PERIPHC_VI_SENSOR2, + PERIPHC_I2C6, + + /* 0x78 */ + PERIPHC_78h, + PERIPHC_EMC_DLL, + PERIPHC_7ah, + PERIPHC_CLK72MHZ, + PERIPHC_7ch, + PERIPHC_7dh, + PERIPHC_VIC, + PERIPHC_7fh, + + PERIPHC_Y_FIRST, + /* 0x80 */ + PERIPHC_SDMMC_LEGACY_TM = PERIPHC_Y_FIRST, /* 0x694 */ + PERIPHC_NVDEC, /* 0x698 */ + PERIPHC_NVJPG, /* 0x69c */ + PERIPHC_NVENC, /* 0x6a0 */ + PERIPHC_84h, + PERIPHC_85h, + PERIPHC_86h, + PERIPHC_87h, + + /* 0x88 */ + PERIPHC_88h, + PERIPHC_89h, + PERIPHC_DMIC3, /* 0x6bc: */ + PERIPHC_APE, /* 0x6c0: */ + PERIPHC_QSPI, /* 0x6c4: */ + PERIPHC_VI_I2C, /* 0x6c8: */ + PERIPHC_USB2_HSIC_TRK, /* 0x6cc: */ + PERIPHC_PEX_SATA_USB_RX_BYP, /* 0x6d0: */ + + /* 0x90 */ + PERIPHC_MAUD, /* 0x6d4: */ + PERIPHC_TSECB, /* 0x6d8: */ + + PERIPHC_COUNT, + PERIPHC_NONE = -1, +}; + +/* Converts a clock number to a clock register: 0=L, 1=H, 2=U, 0=V, 1=W */ +#define PERIPH_REG(id) \ + (id < PERIPH_ID_VW_FIRST) ? \ + ((id) >> 5) : ((id - PERIPH_ID_VW_FIRST) >> 5) + +/* Mask value for a clock (within PERIPH_REG(id)) */ +#define PERIPH_MASK(id) (1 << ((id) & 0x1f)) + +/* return 1 if a PLL ID is in range */ +#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && (id) < CLOCK_ID_COUNT) + +/* return 1 if a peripheral ID is in range */ +#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \ + (id) < PERIPH_ID_COUNT) + +#endif /* _TEGRA210_CLOCK_TABLES_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/clock.h b/arch/arm/include/asm/arch-tegra210/clock.h new file mode 100644 index 0000000..3501be2 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/clock.h @@ -0,0 +1,27 @@ +/* + * (C) Copyright 2010-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra210 clock control definitions */ + +#ifndef _TEGRA210_CLOCK_H_ +#define _TEGRA210_CLOCK_H_ + +#include <asm/arch-tegra/clock.h> + +/* CLK_RST_CONTROLLER_OSC_CTRL_0 */ +#define OSC_FREQ_SHIFT 28 +#define OSC_FREQ_MASK (0xF << OSC_FREQ_SHIFT) + +/* PLL bits that differ from generic clk_rst.h */ +#define PLLC_RESET 30 +#define PLLC_IDDQ 27 +#define PLLD_ENABLE_CLK 21 +#define PLLD_EN_LCKDET 28 + +int tegra_plle_enable(void); + +#endif /* _TEGRA210_CLOCK_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/flow.h b/arch/arm/include/asm/arch-tegra210/flow.h new file mode 100644 index 0000000..e2301ae --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/flow.h @@ -0,0 +1,45 @@ +/* + * (C) Copyright 2010-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_FLOW_H_ +#define _TEGRA210_FLOW_H_ + +struct flow_ctlr { + u32 halt_cpu_events; /* offset 0x00 */ + u32 halt_cop_events; /* offset 0x04 */ + u32 cpu_csr; /* offset 0x08 */ + u32 cop_csr; /* offset 0x0c */ + u32 xrq_events; /* offset 0x10 */ + u32 halt_cpu1_events; /* offset 0x14 */ + u32 cpu1_csr; /* offset 0x18 */ + u32 halt_cpu2_events; /* offset 0x1c */ + u32 cpu2_csr; /* offset 0x20 */ + u32 halt_cpu3_events; /* offset 0x24 */ + u32 cpu3_csr; /* offset 0x28 */ + u32 cluster_control; /* offset 0x2c */ + u32 halt_cop1_events; /* offset 0x30 */ + u32 halt_cop1_csr; /* offset 0x34 */ + u32 cpu_pwr_csr; /* offset 0x38 */ + u32 mpid; /* offset 0x3c */ + u32 ram_repair; /* offset 0x40 */ +}; + +/* HALT_COP_EVENTS_0, 0x04 */ +#define EVENT_MSEC (1 << 24) +#define EVENT_USEC (1 << 25) +#define EVENT_JTAG (1 << 28) +#define EVENT_MODE_STOP (2 << 29) + +/* FLOW_CTLR_CLUSTER_CONTROL_0 0x2c */ +#define ACTIVE_LP (1 << 0) + +/* CPUn_CSR_0 */ +#define CSR_ENABLE (1 << 0) +#define CSR_IMMEDIATE_WAKE (1 << 3) +#define CSR_WAIT_WFI_SHIFT 8 + +#endif /* _TEGRA210_FLOW_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/funcmux.h b/arch/arm/include/asm/arch-tegra210/funcmux.h new file mode 100644 index 0000000..f0851de --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/funcmux.h @@ -0,0 +1,23 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra210 high-level function multiplexing */ + +#ifndef _TEGRA210_FUNCMUX_H_ +#define _TEGRA210_FUNCMUX_H_ + +#include <asm/arch-tegra/funcmux.h> + +/* Configs supported by the func mux */ +enum { + FUNCMUX_DEFAULT = 0, /* default config */ + + /* UART configs */ + FUNCMUX_UART1_UART1 = 0, + FUNCMUX_UART4_UART4 = 0, +}; +#endif /* _TEGRA210_FUNCMUX_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/gp_padctrl.h b/arch/arm/include/asm/arch-tegra210/gp_padctrl.h new file mode 100644 index 0000000..fb69baf --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/gp_padctrl.h @@ -0,0 +1,74 @@ +/* + * (C) Copyright 2010-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_GP_PADCTRL_H_ +#define _TEGRA210_GP_PADCTRL_H_ + +#include <asm/arch-tegra/gp_padctrl.h> + +/* APB_MISC_GP and padctrl registers */ +struct apb_misc_gp_ctlr { + u32 modereg; /* 0x00: APB_MISC_GP_MODEREG */ + u32 hidrev; /* 0x04: APB_MISC_GP_HIDREV */ + u32 reserved0[22]; /* 0x08 - 0x5C: */ + u32 emu_revid; /* 0x60: APB_MISC_GP_EMU_REVID */ + u32 xactor_scratch; /* 0x64: APB_MISC_GP_XACTOR_SCRATCH */ + u32 aocfg1; /* 0x68: APB_MISC_GP_AOCFG1PADCTRL */ + u32 aocfg2; /* 0x6C: APB_MISC_GP_AOCFG2PADCTRL */ + u32 atcfg1; /* 0x70: APB_MISC_GP_ATCFG1PADCTRL */ + u32 atcfg2; /* 0x74: APB_MISC_GP_ATCFG2PADCTRL */ + u32 atcfg3; /* 0x78: APB_MISC_GP_ATCFG3PADCTRL */ + u32 atcfg4; /* 0x7C: APB_MISC_GP_ATCFG4PADCTRL */ + u32 atcfg5; /* 0x80: APB_MISC_GP_ATCFG5PADCTRL */ + u32 cdev1cfg; /* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */ + u32 cdev2cfg; /* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */ + u32 reserved1; /* 0x8C: */ + u32 dap1cfg; /* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */ + u32 dap2cfg; /* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */ + u32 dap3cfg; /* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */ + u32 dap4cfg; /* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */ + u32 dbgcfg; /* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */ + u32 reserved2[3]; /* 0xA4 - 0xAC: */ + u32 sdio3cfg; /* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */ + u32 spicfg; /* 0xB4: APB_MISC_GP_SPICFGPADCTRL */ + u32 uaacfg; /* 0xB8: APB_MISC_GP_UAACFGPADCTRL */ + u32 uabcfg; /* 0xBC: APB_MISC_GP_UABCFGPADCTRL */ + u32 uart2cfg; /* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */ + u32 uart3cfg; /* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */ + u32 reserved3[9]; /* 0xC8-0xE8: */ + u32 sdio1cfg; /* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */ + u32 reserved4[3]; /* 0xF0-0xF8: */ + u32 ddccfg; /* 0xFC: APB_MISC_GP_DDCCFGPADCTRL */ + u32 gmacfg; /* 0x100: APB_MISC_GP_GMACFGPADCTRL */ + u32 reserved5[3]; /* 0x104-0x10C: */ + u32 gmecfg; /* 0x110: APB_MISC_GP_GMECFGPADCTRL */ + u32 gmfcfg; /* 0x114: APB_MISC_GP_GMFCFGPADCTRL */ + u32 gmgcfg; /* 0x118: APB_MISC_GP_GMGCFGPADCTRL */ + u32 gmhcfg; /* 0x11C: APB_MISC_GP_GMHCFGPADCTRL */ + u32 owrcfg; /* 0x120: APB_MISC_GP_OWRCFGPADCTRL */ + u32 uadcfg; /* 0x124: APB_MISC_GP_UADCFGPADCTRL */ + u32 reserved6; /* 0x128: */ + u32 dev3cfg; /* 0x12C: APB_MISC_GP_DEV3CFGPADCTRL */ + u32 reserved7[2]; /* 0x130 - 0x134: */ + u32 ceccfg; /* 0x138: APB_MISC_GP_CECCFGPADCTRL */ + u32 reserved8[22]; /* 0x13C - 0x190: */ + u32 atcfg6; /* 0x194: APB_MISC_GP_ATCFG6PADCTRL */ + u32 dap5cfg; /* 0x198: APB_MISC_GP_DAP5CFGPADCTRL */ + u32 vbuscfg; /* 0x19C: APB_MISC_GP_USBVBUSENCFGPADCTRL */ + u32 aocfg3; /* 0x1A0: APB_MISC_GP_AOCFG3PADCTRL */ + u32 hvccfg0; /* 0x1A4: APB_MISC_GP_HVCCFG0PADCTRL */ + u32 sdio4cfg; /* 0x1A8: APB_MISC_GP_SDIO4CFGPADCTRL */ + u32 aocfg0; /* 0x1AC: APB_MISC_GP_AOCFG0PADCTRL */ +}; + +/* SDMMC1/3 settings from section 27.5 of T114 TRM */ +#define SDIOCFG_DRVUP_SLWF 0 +#define SDIOCFG_DRVDN_SLWR 0 +#define SDIOCFG_DRVUP 0x24 +#define SDIOCFG_DRVDN 0x14 + +#endif /* _TEGRA210_GP_PADCTRL_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/gpio.h b/arch/arm/include/asm/arch-tegra210/gpio.h new file mode 100644 index 0000000..71af423 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/gpio.h @@ -0,0 +1,303 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_GPIO_H_ +#define _TEGRA210_GPIO_H_ + +/* + * The Tegra210 GPIO controller has 256 GPIOS in 8 banks of 4 ports, + * each with 8 GPIOs. + */ +#define TEGRA_GPIO_PORTS 4 /* number of ports per bank */ +#define TEGRA_GPIO_BANKS 8 /* number of banks */ + +#include <asm/arch-tegra/gpio.h> + +/* GPIO Controller registers for a single bank */ +struct gpio_ctlr_bank { + uint gpio_config[TEGRA_GPIO_PORTS]; + uint gpio_dir_out[TEGRA_GPIO_PORTS]; + uint gpio_out[TEGRA_GPIO_PORTS]; + uint gpio_in[TEGRA_GPIO_PORTS]; + uint gpio_int_status[TEGRA_GPIO_PORTS]; + uint gpio_int_enable[TEGRA_GPIO_PORTS]; + uint gpio_int_level[TEGRA_GPIO_PORTS]; + uint gpio_int_clear[TEGRA_GPIO_PORTS]; + uint gpio_masked_config[TEGRA_GPIO_PORTS]; + uint gpio_masked_dir_out[TEGRA_GPIO_PORTS]; + uint gpio_masked_out[TEGRA_GPIO_PORTS]; + uint gpio_masked_in[TEGRA_GPIO_PORTS]; + uint gpio_masked_int_status[TEGRA_GPIO_PORTS]; + uint gpio_masked_int_enable[TEGRA_GPIO_PORTS]; + uint gpio_masked_int_level[TEGRA_GPIO_PORTS]; + uint gpio_masked_int_clear[TEGRA_GPIO_PORTS]; +}; + +struct gpio_ctlr { + struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS]; +}; + +enum gpio_pin { + GPIO_PA0 = 0, /* pin 0 */ + GPIO_PA1, + GPIO_PA2, + GPIO_PA3, + GPIO_PA4, + GPIO_PA5, + GPIO_PA6, + GPIO_PA7, + GPIO_PB0, /* pin 8 */ + GPIO_PB1, + GPIO_PB2, + GPIO_PB3, + GPIO_PB4, + GPIO_PB5, + GPIO_PB6, + GPIO_PB7, + GPIO_PC0, /* pin 16 */ + GPIO_PC1, + GPIO_PC2, + GPIO_PC3, + GPIO_PC4, + GPIO_PC5, + GPIO_PC6, + GPIO_PC7, + GPIO_PD0, /* pin 24 */ + GPIO_PD1, + GPIO_PD2, + GPIO_PD3, + GPIO_PD4, + GPIO_PD5, + GPIO_PD6, + GPIO_PD7, + GPIO_PE0, /* pin 32 */ + GPIO_PE1, + GPIO_PE2, + GPIO_PE3, + GPIO_PE4, + GPIO_PE5, + GPIO_PE6, + GPIO_PE7, + GPIO_PF0, /* pin 40 */ + GPIO_PF1, + GPIO_PF2, + GPIO_PF3, + GPIO_PF4, + GPIO_PF5, + GPIO_PF6, + GPIO_PF7, + GPIO_PG0, /* pin 48 */ + GPIO_PG1, + GPIO_PG2, + GPIO_PG3, + GPIO_PG4, + GPIO_PG5, + GPIO_PG6, + GPIO_PG7, + GPIO_PH0, /* pin 56 */ + GPIO_PH1, + GPIO_PH2, + GPIO_PH3, + GPIO_PH4, + GPIO_PH5, + GPIO_PH6, + GPIO_PH7, + GPIO_PI0, /* pin 64 */ + GPIO_PI1, + GPIO_PI2, + GPIO_PI3, + GPIO_PI4, + GPIO_PI5, + GPIO_PI6, + GPIO_PI7, + GPIO_PJ0, /* pin 72 */ + GPIO_PJ1, + GPIO_PJ2, + GPIO_PJ3, + GPIO_PJ4, + GPIO_PJ5, + GPIO_PJ6, + GPIO_PJ7, + GPIO_PK0, /* pin 80 */ + GPIO_PK1, + GPIO_PK2, + GPIO_PK3, + GPIO_PK4, + GPIO_PK5, + GPIO_PK6, + GPIO_PK7, + GPIO_PL0, /* pin 88 */ + GPIO_PL1, + GPIO_PL2, + GPIO_PL3, + GPIO_PL4, + GPIO_PL5, + GPIO_PL6, + GPIO_PL7, + GPIO_PM0, /* pin 96 */ + GPIO_PM1, + GPIO_PM2, + GPIO_PM3, + GPIO_PM4, + GPIO_PM5, + GPIO_PM6, + GPIO_PM7, + GPIO_PN0, /* pin 104 */ + GPIO_PN1, + GPIO_PN2, + GPIO_PN3, + GPIO_PN4, + GPIO_PN5, + GPIO_PN6, + GPIO_PN7, + GPIO_PO0, /* pin 112 */ + GPIO_PO1, + GPIO_PO2, + GPIO_PO3, + GPIO_PO4, + GPIO_PO5, + GPIO_PO6, + GPIO_PO7, + GPIO_PP0, /* pin 120 */ + GPIO_PP1, + GPIO_PP2, + GPIO_PP3, + GPIO_PP4, + GPIO_PP5, + GPIO_PP6, + GPIO_PP7, + GPIO_PQ0, /* pin 128 */ + GPIO_PQ1, + GPIO_PQ2, + GPIO_PQ3, + GPIO_PQ4, + GPIO_PQ5, + GPIO_PQ6, + GPIO_PQ7, + GPIO_PR0, /* pin 136 */ + GPIO_PR1, + GPIO_PR2, + GPIO_PR3, + GPIO_PR4, + GPIO_PR5, + GPIO_PR6, + GPIO_PR7, + GPIO_PS0, /* pin 144 */ + GPIO_PS1, + GPIO_PS2, + GPIO_PS3, + GPIO_PS4, + GPIO_PS5, + GPIO_PS6, + GPIO_PS7, + GPIO_PT0, /* pin 152 */ + GPIO_PT1, + GPIO_PT2, + GPIO_PT3, + GPIO_PT4, + GPIO_PT5, + GPIO_PT6, + GPIO_PT7, + GPIO_PU0, /* pin 160 */ + GPIO_PU1, + GPIO_PU2, + GPIO_PU3, + GPIO_PU4, + GPIO_PU5, + GPIO_PU6, + GPIO_PU7, + GPIO_PV0, /* pin 168 */ + GPIO_PV1, + GPIO_PV2, + GPIO_PV3, + GPIO_PV4, + GPIO_PV5, + GPIO_PV6, + GPIO_PV7, + GPIO_PW0, /* pin 176 */ + GPIO_PW1, + GPIO_PW2, + GPIO_PW3, + GPIO_PW4, + GPIO_PW5, + GPIO_PW6, + GPIO_PW7, + GPIO_PX0, /* pin 184 */ + GPIO_PX1, + GPIO_PX2, + GPIO_PX3, + GPIO_PX4, + GPIO_PX5, + GPIO_PX6, + GPIO_PX7, + GPIO_PY0, /* pin 192 */ + GPIO_PY1, + GPIO_PY2, + GPIO_PY3, + GPIO_PY4, + GPIO_PY5, + GPIO_PY6, + GPIO_PY7, + GPIO_PZ0, /* pin 200 */ + GPIO_PZ1, + GPIO_PZ2, + GPIO_PZ3, + GPIO_PZ4, + GPIO_PZ5, + GPIO_PZ6, + GPIO_PZ7, + GPIO_PAA0, /* pin 208 */ + GPIO_PAA1, + GPIO_PAA2, + GPIO_PAA3, + GPIO_PAA4, + GPIO_PAA5, + GPIO_PAA6, + GPIO_PAA7, + GPIO_PBB0, /* pin 216 */ + GPIO_PBB1, + GPIO_PBB2, + GPIO_PBB3, + GPIO_PBB4, + GPIO_PBB5, + GPIO_PBB6, + GPIO_PBB7, + GPIO_PCC0, /* pin 224 */ + GPIO_PCC1, + GPIO_PCC2, + GPIO_PCC3, + GPIO_PCC4, + GPIO_PCC5, + GPIO_PCC6, + GPIO_PCC7, + GPIO_PDD0, /* pin 232 */ + GPIO_PDD1, + GPIO_PDD2, + GPIO_PDD3, + GPIO_PDD4, + GPIO_PDD5, + GPIO_PDD6, + GPIO_PDD7, + GPIO_PEE0, /* pin 240 */ + GPIO_PEE1, + GPIO_PEE2, + GPIO_PEE3, + GPIO_PEE4, + GPIO_PEE5, + GPIO_PEE6, + GPIO_PEE7, + GPIO_PFF0, /* pin 248 */ + GPIO_PFF1, + GPIO_PFF2, + GPIO_PFF3, + GPIO_PFF4, + GPIO_PFF5, + GPIO_PFF6, + GPIO_PFF7, /* pin 255 */ +}; + +#endif /* _TEGRA210_GPIO_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/mc.h b/arch/arm/include/asm/arch-tegra210/mc.h new file mode 100644 index 0000000..77e9aa5 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/mc.h @@ -0,0 +1,72 @@ +/* + * Copyright (c) 2014-2015 NVIDIA CORPORATION. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_MC_H_ +#define _TEGRA210_MC_H_ + +/** + * Defines the memory controller registers we need/care about + */ +struct mc_ctlr { + u32 reserved0[4]; /* offset 0x00 - 0x0C */ + u32 mc_smmu_config; /* offset 0x10 */ + u32 mc_smmu_tlb_config; /* offset 0x14 */ + u32 mc_smmu_ptc_config; /* offset 0x18 */ + u32 mc_smmu_ptb_asid; /* offset 0x1C */ + u32 mc_smmu_ptb_data; /* offset 0x20 */ + u32 reserved1[3]; /* offset 0x24 - 0x2C */ + u32 mc_smmu_tlb_flush; /* offset 0x30 */ + u32 mc_smmu_ptc_flush; /* offset 0x34 */ + u32 reserved2[6]; /* offset 0x38 - 0x4C */ + u32 mc_emem_cfg; /* offset 0x50 */ + u32 mc_emem_adr_cfg; /* offset 0x54 */ + u32 mc_emem_adr_cfg_dev0; /* offset 0x58 */ + u32 mc_emem_adr_cfg_dev1; /* offset 0x5C */ + u32 reserved3[4]; /* offset 0x60 - 0x6C */ + u32 mc_security_cfg0; /* offset 0x70 */ + u32 mc_security_cfg1; /* offset 0x74 */ + u32 reserved4[6]; /* offset 0x7C - 0x8C */ + u32 mc_emem_arb_reserved[28]; /* offset 0x90 - 0xFC */ + u32 reserved5[74]; /* offset 0x100 - 0x224 */ + u32 mc_smmu_translation_enable_0; /* offset 0x228 */ + u32 mc_smmu_translation_enable_1; /* offset 0x22C */ + u32 mc_smmu_translation_enable_2; /* offset 0x230 */ + u32 mc_smmu_translation_enable_3; /* offset 0x234 */ + u32 mc_smmu_afi_asid; /* offset 0x238 */ + u32 mc_smmu_avpc_asid; /* offset 0x23C */ + u32 mc_smmu_dc_asid; /* offset 0x240 */ + u32 mc_smmu_dcb_asid; /* offset 0x244 */ + u32 reserved6[2]; /* offset 0x248 - 0x24C */ + u32 mc_smmu_hc_asid; /* offset 0x250 */ + u32 mc_smmu_hda_asid; /* offset 0x254 */ + u32 mc_smmu_isp2_asid; /* offset 0x258 */ + u32 reserved7[2]; /* offset 0x25C - 0x260 */ + u32 mc_smmu_msenc_asid; /* offset 0x264 */ + u32 mc_smmu_nv_asid; /* offset 0x268 */ + u32 mc_smmu_nv2_asid; /* offset 0x26C */ + u32 mc_smmu_ppcs_asid; /* offset 0x270 */ + u32 mc_smmu_sata_asid; /* offset 0x274 */ + u32 reserved8[1]; /* offset 0x278 */ + u32 mc_smmu_vde_asid; /* offset 0x27C */ + u32 mc_smmu_vi_asid; /* offset 0x280 */ + u32 mc_smmu_vic_asid; /* offset 0x284 */ + u32 mc_smmu_xusb_host_asid; /* offset 0x288 */ + u32 mc_smmu_xusb_dev_asid; /* offset 0x28C */ + u32 reserved9[1]; /* offset 0x290 */ + u32 mc_smmu_tsec_asid; /* offset 0x294 */ + u32 mc_smmu_ppcs1_asid; /* offset 0x298 */ + u32 reserved10[235]; /* offset 0x29C - 0x644 */ + u32 mc_video_protect_bom; /* offset 0x648 */ + u32 mc_video_protect_size_mb; /* offset 0x64c */ + u32 mc_video_protect_reg_ctrl; /* offset 0x650 */ +}; + +#define TEGRA_MC_SMMU_CONFIG_ENABLE (1 << 0) + +#define TEGRA_MC_VIDEO_PROTECT_REG_WRITE_ACCESS_ENABLED (0 << 0) +#define TEGRA_MC_VIDEO_PROTECT_REG_WRITE_ACCESS_DISABLED (1 << 0) + +#endif /* _TEGRA210_MC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/pmu.h b/arch/arm/include/asm/arch-tegra210/pmu.h new file mode 100644 index 0000000..1e5f388 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/pmu.h @@ -0,0 +1,14 @@ +/* + * (C) Copyright 2010-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_PMU_H_ +#define _TEGRA210_PMU_H_ + +/* Set core and CPU voltages to nominal levels */ +int pmu_set_nominal(void); + +#endif /* _TEGRA210_PMU_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/powergate.h b/arch/arm/include/asm/arch-tegra210/powergate.h new file mode 100644 index 0000000..df6f91d --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/powergate.h @@ -0,0 +1,12 @@ +/* + * Copyright (c) 2014-2015 NVIDIA CORPORATION. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_POWERGATE_H_ +#define _TEGRA210_POWERGATE_H_ + +#include <asm/arch-tegra/powergate.h> + +#endif /* _TEGRA210_POWERGATE_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/sysctr.h b/arch/arm/include/asm/arch-tegra210/sysctr.h new file mode 100644 index 0000000..e8a13b5 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/sysctr.h @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_SYSCTR_H_ +#define _TEGRA210_SYSCTR_H_ + +struct sysctr_ctlr { + u32 cntcr; /* 0x00: SYSCTR0_CNTCR Counter Control */ + u32 cntsr; /* 0x04: SYSCTR0_CNTSR Counter Status */ + u32 cntcv0; /* 0x08: SYSCTR0_CNTCV0 Counter Count 31:00 */ + u32 cntcv1; /* 0x0C: SYSCTR0_CNTCV1 Counter Count 63:32 */ + u32 reserved1[4]; /* 0x10 - 0x1C */ + u32 cntfid0; /* 0x20: SYSCTR0_CNTFID0 Freq Table Entry */ + u32 cntfid1; /* 0x24: SYSCTR0_CNTFID1 Freq Table End */ + u32 reserved2[1002]; /* 0x28 - 0xFCC */ + u32 counterid[12]; /* 0xFD0 - 0xFxx CounterID regs, RO */ +}; + +#define TSC_CNTCR_ENABLE (1 << 0) /* Enable */ +#define TSC_CNTCR_HDBG (1 << 1) /* Halt on debug */ + +#endif /* _TEGRA210_SYSCTR_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/tegra.h b/arch/arm/include/asm/arch-tegra210/tegra.h new file mode 100644 index 0000000..95c67fb --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/tegra.h @@ -0,0 +1,32 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_TEGRA_H_ +#define _TEGRA210_TEGRA_H_ + +#define GICD_BASE 0x50041000 /* Generic Int Cntrlr Distrib */ +#define GICC_BASE 0x50042000 /* Generic Int Cntrlr CPU I/F */ +#define NV_PA_AHB_BASE 0x6000C000 /* System regs (AHB, etc.) */ +#define NV_PA_TSC_BASE 0x700F0000 /* System Counter TSC regs */ +#define NV_PA_MC_BASE 0x70019000 /* Mem Ctlr regs (MCB, etc.) */ +#define NV_PA_SDRAM_BASE 0x80000000 + +#include <asm/arch-tegra/tegra.h> + +#define BCT_ODMDATA_OFFSET 1288 /* offset to ODMDATA word */ + +#undef NVBOOTINFOTABLE_BCTSIZE +#undef NVBOOTINFOTABLE_BCTPTR +#define NVBOOTINFOTABLE_BCTSIZE 0x48 /* BCT size in BIT in IRAM */ +#define NVBOOTINFOTABLE_BCTPTR 0x4C /* BCT pointer in BIT in IRAM */ + +#define MAX_NUM_CPU 4 +#define MCB_EMEM_ARB_OVERRIDE (NV_PA_MC_BASE + 0xE8) + +#define TEGRA_USB1_BASE 0x7D000000 + +#endif /* _TEGRA210_TEGRA_H_ */ diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h index c9dc49d..7640eab 100644 --- a/arch/arm/include/asm/arch-zynqmp/hardware.h +++ b/arch/arm/include/asm/arch-zynqmp/hardware.h @@ -11,6 +11,11 @@ #define ZYNQ_SERIAL_BASEADDR0 0xFF000000 #define ZYNQ_SERIAL_BASEADDR1 0xFF001000 +#define ZYNQ_GEM_BASEADDR0 0xFF0B0000 +#define ZYNQ_GEM_BASEADDR1 0xFF0C0000 +#define ZYNQ_GEM_BASEADDR2 0xFF0D0000 +#define ZYNQ_GEM_BASEADDR3 0xFF0E0000 + #define ZYNQ_SPI_BASEADDR0 0xFF040000 #define ZYNQ_SPI_BASEADDR1 0xFF050000 @@ -20,6 +25,8 @@ #define ZYNQ_SDHCI_BASEADDR0 0xFF160000 #define ZYNQ_SDHCI_BASEADDR1 0xFF170000 +#define ZYNQMP_SATA_BASEADDR 0xFD0C0000 + #define ZYNQMP_CRL_APB_BASEADDR 0xFF5E0000 #define ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT 0x1000000 @@ -55,6 +62,15 @@ struct iou_scntr { #define EMMC_MODE 0x00000006 #define JTAG_MODE 0x00000000 +#define ZYNQMP_IOU_SLCR_BASEADDR 0xFF180000 + +struct iou_slcr_regs { + u32 mio_pin[78]; + u32 reserved[442]; +}; + +#define slcr_base ((struct iou_slcr_regs *)ZYNQMP_IOU_SLCR_BASEADDR) + #define ZYNQMP_RPU_BASEADDR 0xFF9A0000 struct rpu_regs { diff --git a/arch/arm/include/asm/arch-zynqmp/sys_proto.h b/arch/arm/include/asm/arch-zynqmp/sys_proto.h index d8e0ba1..f5c90d1 100644 --- a/arch/arm/include/asm/arch-zynqmp/sys_proto.h +++ b/arch/arm/include/asm/arch-zynqmp/sys_proto.h @@ -8,7 +8,13 @@ #ifndef _ASM_ARCH_SYS_PROTO_H #define _ASM_ARCH_SYS_PROTO_H +/* Setup clk for network */ +static inline void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate) +{ +} + int zynq_sdhci_init(unsigned long regbase); +int zynq_slcr_get_mio_pin_status(const char *periph); unsigned int zynqmp_get_silicon_version(void); diff --git a/arch/arm/include/asm/armv8/mmu.h b/arch/arm/include/asm/armv8/mmu.h index 4b9cb52..04fa0be 100644 --- a/arch/arm/include/asm/armv8/mmu.h +++ b/arch/arm/include/asm/armv8/mmu.h @@ -93,8 +93,8 @@ #define TCR_ORGN_WBNWA (3 << 10) #define TCR_ORGN_MASK (3 << 10) #define TCR_SHARED_NON (0 << 12) -#define TCR_SHARED_OUTER (1 << 12) -#define TCR_SHARED_INNER (2 << 12) +#define TCR_SHARED_OUTER (2 << 12) +#define TCR_SHARED_INNER (3 << 12) #define TCR_TG0_4K (0 << 14) #define TCR_TG0_64K (1 << 14) #define TCR_TG0_16K (2 << 14) diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index bb24f33..4e3ea55 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -8,10 +8,6 @@ #ifndef __ASM_GBL_DATA_H #define __ASM_GBL_DATA_H -#ifdef CONFIG_OMAP -#include <asm/omap_boot.h> -#endif - /* Architecture-specific global data */ struct arch_global_data { #if defined(CONFIG_FSL_ESDHC) @@ -45,8 +41,10 @@ struct arch_global_data { unsigned long tlb_size; #endif -#ifdef CONFIG_OMAP - struct omap_boot_parameters omap_boot_params; +#ifdef CONFIG_OMAP_COMMON + u32 omap_boot_device; + u32 omap_boot_mode; + u8 omap_ch_flags; #endif #ifdef CONFIG_FSL_LSCH3 unsigned long mem2_clk; diff --git a/arch/arm/include/asm/omap_boot.h b/arch/arm/include/asm/omap_boot.h deleted file mode 100644 index f77f9d6..0000000 --- a/arch/arm/include/asm/omap_boot.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * (C) Copyright 2013 - * Texas Instruments, <www.ti.com> - * - * Sricharan R <r.sricharan@ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* ROM code defines */ -/* Boot device */ -#define BOOT_DEVICE_MASK 0xFF -#define BOOT_DEVICE_OFFSET 0x8 -#define DEV_DESC_PTR_OFFSET 0x4 -#define DEV_DATA_PTR_OFFSET 0x18 -#define BOOT_MODE_OFFSET 0x8 -#define RESET_REASON_OFFSET 0x9 -#define CH_FLAGS_OFFSET 0xA - -#define CH_FLAGS_CHSETTINGS (0x1 << 0) -#define CH_FLAGS_CHRAM (0x1 << 1) -#define CH_FLAGS_CHFLASH (0x1 << 2) -#define CH_FLAGS_CHMMCSD (0x1 << 3) - -#ifndef __ASSEMBLY__ -struct omap_boot_parameters { - char *boot_message; - unsigned int mem_boot_descriptor; - unsigned char omap_bootdevice; - unsigned char reset_reason; - unsigned char ch_flags; - unsigned long omap_bootmode; -}; -#endif diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 5469435..056affc 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -688,4 +688,17 @@ static inline u8 is_dra72x(void) #define OMAP_SRAM_SCRATCH_BOOT_PARAMS (SRAM_SCRATCH_SPACE_ADDR + 0x24) #define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x28) +/* Boot parameters */ +#define DEVICE_DATA_OFFSET 0x18 +#define BOOT_MODE_OFFSET 0x8 + +#define CH_FLAGS_CHSETTINGS (1 << 0) +#define CH_FLAGS_CHRAM (1 << 1) +#define CH_FLAGS_CHFLASH (1 << 2) +#define CH_FLAGS_CHMMCSD (1 << 3) + +#ifndef __ASSEMBLY__ +u32 omap_sys_boot_device(void); +#endif + #endif /* _OMAP_COMMON_H_ */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 760e8ab..868ea54 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -15,9 +15,15 @@ #define CR_EE (1 << 25) /* Exception (Big) Endian */ #define PGTABLE_SIZE (0x10000) +/* 2MB granularity */ +#define MMU_SECTION_SHIFT 21 #ifndef __ASSEMBLY__ +enum dcache_option { + DCACHE_OFF = 0x3, +}; + #define isb() \ ({asm volatile( \ "isb" : : : "memory"); \ @@ -265,16 +271,6 @@ enum { #endif /** - * Change the cache settings for a region. - * - * \param start start address of memory region to change - * \param size size of memory region to change - * \param option dcache option to select - */ -void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size, - enum dcache_option option); - -/** * Register an update to the page tables, and flush the TLB * * \param start start address of update in page table @@ -295,4 +291,17 @@ phys_addr_t noncached_alloc(size_t size, size_t align); #endif /* CONFIG_ARM64 */ +#ifndef __ASSEMBLY__ +/** + * Change the cache settings for a region. + * + * \param start start address of memory region to change + * \param size size of memory region to change + * \param option dcache option to select + */ +void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size, + enum dcache_option option); + +#endif /* __ASSEMBLY__ */ + #endif diff --git a/arch/arm/include/asm/ti-common/sys_proto.h b/arch/arm/include/asm/ti-common/sys_proto.h index d3ab75f..2bdb71c 100644 --- a/arch/arm/include/asm/ti-common/sys_proto.h +++ b/arch/arm/include/asm/ti-common/sys_proto.h @@ -36,7 +36,7 @@ static inline u8 uboot_loaded_by_spl(void) * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a * mandatory section if CH is present. */ - if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) + if (gd->arch.omap_ch_flags & CH_FLAGS_CHSETTINGS) return 0; else return running_from_sdram(); diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S index bc9c53c..98a906e 100644 --- a/arch/arm/lib/crt0_64.S +++ b/arch/arm/lib/crt0_64.S @@ -74,7 +74,8 @@ zero_gd: cmp x0, x18 b.gt zero_gd #if defined(CONFIG_SYS_MALLOC_F_LEN) - sub x0, x18, #CONFIG_SYS_MALLOC_F_LEN + ldr x0, =CONFIG_SYS_MALLOC_F_LEN + sub x0, x18, x0 str x0, [x18, #GD_MALLOC_BASE] #endif bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */ diff --git a/arch/arm/mach-keystone/cmd_mon.c b/arch/arm/mach-keystone/cmd_mon.c index f9f58a3..73ceb83 100644 --- a/arch/arm/mach-keystone/cmd_mon.c +++ b/arch/arm/mach-keystone/cmd_mon.c @@ -55,8 +55,13 @@ U_BOOT_CMD(mon_install, 2, 0, do_mon_install, static void core_spin(void) { - while (1) - ; /* forever */; + while (1) { + asm volatile ( + "dsb\n" + "isb\n" + "wfi\n" + ); + } } int mon_power_on(int core_id, void *ep) diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 4f477cd..446ce04 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -20,5 +20,7 @@ obj-y += timer.o obj-$(CONFIG_SPL_BUILD) += spl.o obj-$(CONFIG_SPL_BUILD) += lowlevel_spl.o -obj-y += serdes/ +obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += serdes/a38x/ +obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += serdes/axp/ + endif diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 9bc9f00..9496d5f 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -163,6 +163,14 @@ static void update_sdram_window_sizes(void) } } +void mmu_disable(void) +{ + asm volatile( + "mrc p15, 0, r0, c1, c0, 0\n" + "bic r0, #1\n" + "mcr p15, 0, r0, c1, c0, 0\n"); +} + #ifdef CONFIG_ARCH_CPU_INIT static void set_cbar(u32 addr) { @@ -172,6 +180,16 @@ static void set_cbar(u32 addr) int arch_cpu_init(void) { +#ifndef CONFIG_SPL_BUILD + /* + * Only with disabled MMU its possible to switch the base + * register address on Armada 38x. Without this the SDRAM + * located at >= 0x4000.0000 is also not accessible, as its + * still locked to cache. + */ + mmu_disable(); +#endif + /* Linux expects the internal registers to be at 0xf1000000 */ writel(SOC_REGS_PHY_BASE, INTREG_BASE_ADDR_REG); set_cbar(SOC_REGS_PHY_BASE + 0xC000); diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h index 4bdb633..8bcdef6 100644 --- a/arch/arm/mach-mvebu/include/mach/cpu.h +++ b/arch/arm/mach-mvebu/include/mach/cpu.h @@ -125,7 +125,7 @@ int serdes_phy_config(void); /* * DDR3 init / training code ported from Marvell bin_hdr. Now * available in mainline U-Boot in: - * drivers/ddr/mvebu/ + * drivers/ddr/marvell */ int ddr3_init(void); #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h index 1aaea67..125b5f2 100644 --- a/arch/arm/mach-mvebu/include/mach/soc.h +++ b/arch/arm/mach-mvebu/include/mach/soc.h @@ -28,7 +28,17 @@ /* SOC specific definations */ #define INTREG_BASE 0xd0000000 #define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080) +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SYS_MVEBU_DDR_A38X) +/* + * On A38x switching the regs base address without running from + * SDRAM doesn't seem to work. So let the SPL still use the + * default base address and switch to the new address in the + * main u-boot later. + */ +#define SOC_REGS_PHY_BASE 0xd0000000 +#else #define SOC_REGS_PHY_BASE 0xf1000000 +#endif #define MVEBU_REGISTER(x) (SOC_REGS_PHY_BASE + x) #define MVEBU_SDRAM_SCRATCH (MVEBU_REGISTER(0x01504)) @@ -52,6 +62,7 @@ #define MVEBU_USB20_BASE (MVEBU_REGISTER(0x58000)) #define MVEBU_EGIGA0_BASE (MVEBU_REGISTER(0x70000)) #define MVEBU_EGIGA1_BASE (MVEBU_REGISTER(0x74000)) +#define MVEBU_AXP_SATA_BASE (MVEBU_REGISTER(0xa0000)) #define MVEBU_SATA0_BASE (MVEBU_REGISTER(0xa8000)) #define MVEBU_SDIO_BASE (MVEBU_REGISTER(0xd8000)) diff --git a/arch/arm/mach-mvebu/serdes/a38x/Makefile b/arch/arm/mach-mvebu/serdes/a38x/Makefile new file mode 100644 index 0000000..1503da8 --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/Makefile @@ -0,0 +1,10 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_SPL_BUILD) = ctrl_pex.o +obj-$(CONFIG_SPL_BUILD) += high_speed_env_spec.o +obj-$(CONFIG_SPL_BUILD) += high_speed_env_spec-38x.o +obj-$(CONFIG_SPL_BUILD) += high_speed_topology_spec-38x.o +obj-$(CONFIG_SPL_BUILD) += seq_exec.o +obj-$(CONFIG_SPL_BUILD) += sys_env_lib.o diff --git a/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c new file mode 100644 index 0000000..5f223f9 --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c @@ -0,0 +1,347 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ctrl_pex.h" +#include "sys_env_lib.h" + +int hws_pex_config(struct serdes_map *serdes_map) +{ + u32 pex_idx, tmp, next_busno, first_busno, temp_pex_reg, + temp_reg, addr, dev_id, ctrl_mode; + enum serdes_type serdes_type; + u32 idx, max_lane_num; + + DEBUG_INIT_FULL_S("\n### hws_pex_config ###\n"); + + max_lane_num = hws_serdes_get_max_lane(); + for (idx = 0; idx < max_lane_num; idx++) { + serdes_type = serdes_map[idx].serdes_type; + /* configuration for PEX only */ + if ((serdes_type != PEX0) && (serdes_type != PEX1) && + (serdes_type != PEX2) && (serdes_type != PEX3)) + continue; + + if ((serdes_type != PEX0) && + ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) || + (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) { + /* for PEX by4 - relevant for the first port only */ + continue; + } + + pex_idx = serdes_type - PEX0; + tmp = reg_read(PEX_CAPABILITIES_REG(pex_idx)); + tmp &= ~(0xf << 20); + tmp |= (0x4 << 20); + reg_write(PEX_CAPABILITIES_REG(pex_idx), tmp); + } + + tmp = reg_read(SOC_CTRL_REG); + tmp &= ~0x03; + + for (idx = 0; idx < max_lane_num; idx++) { + serdes_type = serdes_map[idx].serdes_type; + if ((serdes_type != PEX0) && + ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) || + (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) { + /* for PEX by4 - relevant for the first port only */ + continue; + } + + switch (serdes_type) { + case PEX0: + tmp |= 0x1 << PCIE0_ENABLE_OFFS; + break; + case PEX1: + tmp |= 0x1 << PCIE1_ENABLE_OFFS; + break; + case PEX2: + tmp |= 0x1 << PCIE2_ENABLE_OFFS; + break; + case PEX3: + tmp |= 0x1 << PCIE3_ENABLE_OFFS; + break; + default: + break; + } + } + + reg_write(SOC_CTRL_REG, tmp); + + /* Support gen1/gen2 */ + DEBUG_INIT_FULL_S("Support gen1/gen2\n"); + next_busno = 0; + mdelay(150); + + for (idx = 0; idx < max_lane_num; idx++) { + serdes_type = serdes_map[idx].serdes_type; + DEBUG_INIT_FULL_S(" serdes_type=0x"); + DEBUG_INIT_FULL_D(serdes_type, 8); + DEBUG_INIT_FULL_S("\n"); + DEBUG_INIT_FULL_S(" idx=0x"); + DEBUG_INIT_FULL_D(idx, 8); + DEBUG_INIT_FULL_S("\n"); + + /* Configuration for PEX only */ + if ((serdes_type != PEX0) && (serdes_type != PEX1) && + (serdes_type != PEX2) && (serdes_type != PEX3)) + continue; + + if ((serdes_type != PEX0) && + ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) || + (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) { + /* for PEX by4 - relevant for the first port only */ + continue; + } + + pex_idx = serdes_type - PEX0; + tmp = reg_read(PEX_DBG_STATUS_REG(pex_idx)); + + first_busno = next_busno; + if ((tmp & 0x7f) != 0x7e) { + DEBUG_INIT_S("PCIe, Idx "); + DEBUG_INIT_D(pex_idx, 1); + DEBUG_INIT_S(": detected no link\n"); + continue; + } + + next_busno++; + temp_pex_reg = reg_read((PEX_CFG_DIRECT_ACCESS + (pex_idx, PEX_LINK_CAPABILITY_REG))); + temp_pex_reg &= 0xf; + if (temp_pex_reg != 0x2) + continue; + + temp_reg = (reg_read(PEX_CFG_DIRECT_ACCESS( + pex_idx, + PEX_LINK_CTRL_STAT_REG)) & + 0xf0000) >> 16; + + /* Check if the link established is GEN1 */ + DEBUG_INIT_FULL_S + ("Checking if the link established is gen1\n"); + if (temp_reg != 0x1) + continue; + + pex_local_bus_num_set(pex_idx, first_busno); + pex_local_dev_num_set(pex_idx, 1); + DEBUG_INIT_FULL_S("PCIe, Idx "); + DEBUG_INIT_FULL_D(pex_idx, 1); + + DEBUG_INIT_S(":** Link is Gen1, check the EP capability\n"); + /* link is Gen1, check the EP capability */ + addr = pex_config_read(pex_idx, first_busno, 0, 0, 0x34) & 0xff; + DEBUG_INIT_FULL_C("pex_config_read: return addr=0x%x", addr, 4); + if (addr == 0xff) { + DEBUG_INIT_FULL_C + ("pex_config_read: return 0xff -->PCIe (%d): Detected No Link.", + pex_idx, 1); + continue; + } + + while ((pex_config_read(pex_idx, first_busno, 0, 0, addr) + & 0xff) != 0x10) { + addr = (pex_config_read(pex_idx, first_busno, 0, + 0, addr) & 0xff00) >> 8; + } + + /* Check for Gen2 and above */ + if ((pex_config_read(pex_idx, first_busno, 0, 0, + addr + 0xc) & 0xf) < 0x2) { + DEBUG_INIT_S("PCIe, Idx "); + DEBUG_INIT_D(pex_idx, 1); + DEBUG_INIT_S(": remains Gen1\n"); + continue; + } + + tmp = reg_read(PEX_LINK_CTRL_STATUS2_REG(pex_idx)); + DEBUG_RD_REG(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp); + tmp &= ~(BIT(0) | BIT(1)); + tmp |= BIT(1); + tmp |= BIT(6); /* Select Deemphasize (-3.5d_b) */ + reg_write(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp); + DEBUG_WR_REG(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp); + + tmp = reg_read(PEX_CTRL_REG(pex_idx)); + DEBUG_RD_REG(PEX_CTRL_REG(pex_idx), tmp); + tmp |= BIT(10); + reg_write(PEX_CTRL_REG(pex_idx), tmp); + DEBUG_WR_REG(PEX_CTRL_REG(pex_idx), tmp); + + /* + * We need to wait 10ms before reading the PEX_DBG_STATUS_REG + * in order not to read the status of the former state + */ + mdelay(10); + + DEBUG_INIT_S("PCIe, Idx "); + DEBUG_INIT_D(pex_idx, 1); + DEBUG_INIT_S + (": Link upgraded to Gen2 based on client cpabilities\n"); + } + + /* Update pex DEVICE ID */ + ctrl_mode = sys_env_model_get(); + + for (idx = 0; idx < max_lane_num; idx++) { + serdes_type = serdes_map[idx].serdes_type; + /* configuration for PEX only */ + if ((serdes_type != PEX0) && (serdes_type != PEX1) && + (serdes_type != PEX2) && (serdes_type != PEX3)) + continue; + + if ((serdes_type != PEX0) && + ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) || + (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) { + /* for PEX by4 - relevant for the first port only */ + continue; + } + + pex_idx = serdes_type - PEX0; + dev_id = reg_read(PEX_CFG_DIRECT_ACCESS + (pex_idx, PEX_DEVICE_AND_VENDOR_ID)); + dev_id &= 0xffff; + dev_id |= ((ctrl_mode << 16) & 0xffff0000); + reg_write(PEX_CFG_DIRECT_ACCESS + (pex_idx, PEX_DEVICE_AND_VENDOR_ID), dev_id); + } + DEBUG_INIT_FULL_C("Update PEX Device ID ", ctrl_mode, 4); + + return MV_OK; +} + +int pex_local_bus_num_set(u32 pex_if, u32 bus_num) +{ + u32 pex_status; + + DEBUG_INIT_FULL_S("\n### pex_local_bus_num_set ###\n"); + + if (bus_num >= MAX_PEX_BUSSES) { + DEBUG_INIT_C("pex_local_bus_num_set: Illegal bus number %d\n", + bus_num, 4); + return MV_BAD_PARAM; + } + + pex_status = reg_read(PEX_STATUS_REG(pex_if)); + pex_status &= ~PXSR_PEX_BUS_NUM_MASK; + pex_status |= + (bus_num << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK; + reg_write(PEX_STATUS_REG(pex_if), pex_status); + + return MV_OK; +} + +int pex_local_dev_num_set(u32 pex_if, u32 dev_num) +{ + u32 pex_status; + + DEBUG_INIT_FULL_S("\n### pex_local_dev_num_set ###\n"); + + pex_status = reg_read(PEX_STATUS_REG(pex_if)); + pex_status &= ~PXSR_PEX_DEV_NUM_MASK; + pex_status |= + (dev_num << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK; + reg_write(PEX_STATUS_REG(pex_if), pex_status); + + return MV_OK; +} + +/* + * pex_config_read - Read from configuration space + * + * DESCRIPTION: + * This function performs a 32 bit read from PEX configuration space. + * It supports both type 0 and type 1 of Configuration Transactions + * (local and over bridge). In order to read from local bus segment, use + * bus number retrieved from pex_local_bus_num_get(). Other bus numbers + * will result configuration transaction of type 1 (over bridge). + * + * INPUT: + * pex_if - PEX interface number. + * bus - PEX segment bus number. + * dev - PEX device number. + * func - Function number. + * reg_offs - Register offset. + * + * OUTPUT: + * None. + * + * RETURN: + * 32bit register data, 0xffffffff on error + */ +u32 pex_config_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 reg_off) +{ + u32 pex_data = 0; + u32 local_dev, local_bus; + u32 pex_status; + + pex_status = reg_read(PEX_STATUS_REG(pex_if)); + local_dev = + ((pex_status & PXSR_PEX_DEV_NUM_MASK) >> PXSR_PEX_DEV_NUM_OFFS); + local_bus = + ((pex_status & PXSR_PEX_BUS_NUM_MASK) >> PXSR_PEX_BUS_NUM_OFFS); + + /* + * In PCI Express we have only one device number + * and this number is the first number we encounter + * else that the local_dev + * spec pex define return on config read/write on any device + */ + if (bus == local_bus) { + if (local_dev == 0) { + /* + * if local dev is 0 then the first number we encounter + * after 0 is 1 + */ + if ((dev != 1) && (dev != local_dev)) + return MV_ERROR; + } else { + /* + * if local dev is not 0 then the first number we + * encounter is 0 + */ + if ((dev != 0) && (dev != local_dev)) + return MV_ERROR; + } + } + + /* Creating PEX address to be passed */ + pex_data = (bus << PXCAR_BUS_NUM_OFFS); + pex_data |= (dev << PXCAR_DEVICE_NUM_OFFS); + pex_data |= (func << PXCAR_FUNC_NUM_OFFS); + /* Legacy register space */ + pex_data |= (reg_off & PXCAR_REG_NUM_MASK); + /* Extended register space */ + pex_data |= (((reg_off & PXCAR_REAL_EXT_REG_NUM_MASK) >> + PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS); + pex_data |= PXCAR_CONFIG_EN; + + /* Write the address to the PEX configuration address register */ + reg_write(PEX_CFG_ADDR_REG(pex_if), pex_data); + + /* + * In order to let the PEX controller absorbed the address + * of the read transaction we perform a validity check that + * the address was written + */ + if (pex_data != reg_read(PEX_CFG_ADDR_REG(pex_if))) + return MV_ERROR; + + /* Cleaning Master Abort */ + reg_bit_set(PEX_CFG_DIRECT_ACCESS(pex_if, PEX_STATUS_AND_COMMAND), + PXSAC_MABORT); + /* Read the Data returned in the PEX Data register */ + pex_data = reg_read(PEX_CFG_DATA_REG(pex_if)); + + DEBUG_INIT_FULL_C(" --> ", pex_data, 4); + + return pex_data; +} diff --git a/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h new file mode 100644 index 0000000..df395bf --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h @@ -0,0 +1,86 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _CTRL_PEX_H +#define _CTRL_PEX_H + +#include "high_speed_env_spec.h" + +/* Sample at Reset */ +#define MPP_SAMPLE_AT_RESET(id) (0xe4200 + (id * 4)) + +/* PCI Express Control and Status Registers */ +#define MAX_PEX_BUSSES 256 + +#define MISC_REGS_OFFSET 0x18200 +#define MV_MISC_REGS_BASE MISC_REGS_OFFSET +#define SOC_CTRL_REG (MV_MISC_REGS_BASE + 0x4) + +#define PEX_IF_REGS_OFFSET(if) ((if) > 0 ? \ + (0x40000 + ((if) - 1) * 0x4000) : \ + 0x80000) +#define PEX_IF_REGS_BASE(if) (PEX_IF_REGS_OFFSET(if)) +#define PEX_CAPABILITIES_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x60) +#define PEX_LINK_CTRL_STATUS2_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x90) +#define PEX_CTRL_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a00) +#define PEX_STATUS_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a04) +#define PEX_DBG_STATUS_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a64) +#define PEX_LINK_CAPABILITY_REG 0x6c +#define PEX_LINK_CTRL_STAT_REG 0x70 +#define PXSR_PEX_DEV_NUM_OFFS 16 /* Device Number Indication */ +#define PXSR_PEX_DEV_NUM_MASK (0x1f << PXSR_PEX_DEV_NUM_OFFS) +#define PXSR_PEX_BUS_NUM_OFFS 8 /* Bus Number Indication */ +#define PXSR_PEX_BUS_NUM_MASK (0xff << PXSR_PEX_BUS_NUM_OFFS) + +/* PEX_CAPABILITIES_REG fields */ +#define PCIE0_ENABLE_OFFS 0 +#define PCIE0_ENABLE_MASK (0x1 << PCIE0_ENABLE_OFFS) +#define PCIE1_ENABLE_OFFS 1 +#define PCIE1_ENABLE_MASK (0x1 << PCIE1_ENABLE_OFFS) +#define PCIE2_ENABLE_OFFS 2 +#define PCIE2_ENABLE_MASK (0x1 << PCIE2_ENABLE_OFFS) +#define PCIE3_ENABLE_OFFS 3 +#define PCIE4_ENABLE_MASK (0x1 << PCIE3_ENABLE_OFFS) + +/* Controller revision info */ +#define PEX_DEVICE_AND_VENDOR_ID 0x000 + +/* PCI Express Configuration Address Register */ +#define PXCAR_REG_NUM_OFFS 2 +#define PXCAR_REG_NUM_MAX 0x3f +#define PXCAR_REG_NUM_MASK (PXCAR_REG_NUM_MAX << \ + PXCAR_REG_NUM_OFFS) +#define PXCAR_FUNC_NUM_OFFS 8 +#define PXCAR_FUNC_NUM_MAX 0x7 +#define PXCAR_FUNC_NUM_MASK (PXCAR_FUNC_NUM_MAX << \ + PXCAR_FUNC_NUM_OFFS) +#define PXCAR_DEVICE_NUM_OFFS 11 +#define PXCAR_DEVICE_NUM_MAX 0x1f +#define PXCAR_DEVICE_NUM_MASK (PXCAR_DEVICE_NUM_MAX << \ + PXCAR_DEVICE_NUM_OFFS) +#define PXCAR_BUS_NUM_OFFS 16 +#define PXCAR_BUS_NUM_MAX 0xff +#define PXCAR_BUS_NUM_MASK (PXCAR_BUS_NUM_MAX << \ + PXCAR_BUS_NUM_OFFS) +#define PXCAR_EXT_REG_NUM_OFFS 24 +#define PXCAR_EXT_REG_NUM_MAX 0xf + +#define PEX_CFG_ADDR_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x18f8) +#define PEX_CFG_DATA_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x18fc) + +#define PXCAR_REAL_EXT_REG_NUM_OFFS 8 +#define PXCAR_REAL_EXT_REG_NUM_MASK (0xf << PXCAR_REAL_EXT_REG_NUM_OFFS) + +#define PXCAR_CONFIG_EN BIT(31) +#define PEX_STATUS_AND_COMMAND 0x004 +#define PXSAC_MABORT BIT(29) /* Recieved Master Abort */ + +int hws_pex_config(struct serdes_map *serdes_map); +int pex_local_bus_num_set(u32 pex_if, u32 bus_num); +int pex_local_dev_num_set(u32 pex_if, u32 dev_num); +u32 pex_config_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 reg_off); + +#endif diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c new file mode 100644 index 0000000..5ff8567 --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c @@ -0,0 +1,158 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "high_speed_env_spec.h" +#include "sys_env_lib.h" + +#define SERDES_VERION "2.0" + +u8 selectors_serdes_rev1_map[LAST_SERDES_TYPE][MAX_SERDES_LANES] = { + /* 0 1 2 3 4 5 */ + {0x1, 0x1, NA, NA, NA, NA}, /* PEX0 */ + {NA, 0x2, 0x1, NA, 0x1, NA}, /* PEX1 */ + {NA, NA, 0x2, NA, NA, 0x1}, /* PEX2 */ + {NA, NA, NA, 0x1, NA, NA}, /* PEX3 */ + {0x2, 0x3, NA, NA, NA, NA}, /* SATA0 */ + {NA, NA, 0x3, NA, 0x2, NA}, /* SATA1 */ + {NA, NA, NA, NA, 0x6, 0x2}, /* SATA2 */ + {NA, NA, NA, 0x3, NA, NA}, /* SATA3 */ + {0x3, 0x4, NA, NA, NA, NA}, /* SGMII0 */ + {NA, 0x5, 0x4, NA, 0x3, NA}, /* SGMII1 */ + {NA, NA, NA, 0x4, NA, 0x3}, /* SGMII2 */ + {NA, 0x7, NA, NA, NA, NA}, /* QSGMII */ + {NA, 0x6, NA, NA, 0x4, NA}, /* USB3_HOST0 */ + {NA, NA, NA, 0x5, NA, 0x4}, /* USB3_HOST1 */ + {NA, NA, NA, 0x6, 0x5, 0x5}, /* USB3_DEVICE */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0} /* DEFAULT_SERDES */ +}; + +int hws_serdes_seq_init(void) +{ + DEBUG_INIT_FULL_S("\n### serdes_seq_init ###\n"); + + if (hws_serdes_seq_db_init() != MV_OK) { + printf("hws_serdes_seq_init: Error: Serdes initialization fail\n"); + return MV_FAIL; + } + + return MV_OK; +} + +int serdes_power_up_ctrl_ext(u32 serdes_num, int serdes_power_up, + enum serdes_type serdes_type, + enum serdes_speed baud_rate, + enum serdes_mode serdes_mode, + enum ref_clock ref_clock) +{ + return MV_NOT_SUPPORTED; +} + +u32 hws_serdes_silicon_ref_clock_get(void) +{ + DEBUG_INIT_FULL_S("\n### hws_serdes_silicon_ref_clock_get ###\n"); + + return REF_CLOCK_25MHZ; +} + +u32 hws_serdes_get_max_lane(void) +{ + switch (sys_env_device_id_get()) { + case MV_6811: /* A381/A3282: 6811/6821: single/dual cpu */ + return 4; + case MV_6810: + return 5; + case MV_6820: + case MV_6828: + return 6; + default: /* not the right module */ + printf("%s: Device ID Error, using 4 SerDes lanes\n", + __func__); + return 4; + } + return 6; +} + +int hws_is_serdes_active(u8 lane_num) +{ + int ret = 1; + + /* Maximum lane count for A388 (6828) is 6 */ + if (lane_num > 6) + ret = 0; + + /* 4th Lane (#4 on Device 6810 is not Active */ + if (sys_env_device_id_get() == MV_6810 && lane_num == 4) { + printf("%s: Error: Lane#4 on Device 6810 is not Active.\n", + __func__); + return 0; + } + + /* + * 6th Lane (#5) on Device 6810 is Active, even though 6810 + * has only 5 lanes + */ + if (sys_env_device_id_get() == MV_6810 && lane_num == 5) + return 1; + + if (lane_num >= hws_serdes_get_max_lane()) + ret = 0; + + return ret; +} + +int hws_get_ext_base_addr(u32 serdes_num, u32 base_addr, u32 unit_base_offset, + u32 *unit_base_reg, u32 *unit_offset) +{ + *unit_base_reg = base_addr; + *unit_offset = unit_base_offset; + + return MV_OK; +} + +/* + * hws_serdes_get_phy_selector_val + * + * DESCRIPTION: Get the mapping of Serdes Selector values according to the + * Serdes revision number + * INPUT: serdes_num - Serdes number + * serdes_type - Serdes type + * OUTPUT: None + * RETURN: + * Mapping of Serdes Selector values + */ +u32 hws_serdes_get_phy_selector_val(int serdes_num, + enum serdes_type serdes_type) +{ + if (serdes_type >= LAST_SERDES_TYPE) + return 0xff; + + if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2) { + return selectors_serdes_rev1_map + [serdes_type][serdes_num]; + } else + return selectors_serdes_rev2_map + [serdes_type][serdes_num]; +} + +u32 hws_get_physical_serdes_num(u32 serdes_num) +{ + if ((serdes_num == 4) && (sys_env_device_id_get() == MV_6810)) { + /* + * For 6810, there are 5 Serdes and Serdes Num 4 doesn't + * exist. Instead Serdes Num 5 is connected. + */ + return 5; + } else { + return serdes_num; + } +} diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c new file mode 100644 index 0000000..23af769 --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c @@ -0,0 +1,2228 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "high_speed_env_spec.h" +#include "high_speed_topology_spec.h" +#include "sys_env_lib.h" +#include "ctrl_pex.h" + +#if defined(CONFIG_ARMADA_38X) +#elif defined(CONFIG_ARMADA_39X) +#else +#error "No device is defined" +#endif + +/* + * The board topology map, initialized in the beginning of + * ctrl_high_speed_serdes_phy_config + */ +struct serdes_map serdes_configuration_map[MAX_SERDES_LANES]; + +/* + * serdes_seq_db - holds all serdes sequences, their size and the + * relevant index in the data array initialized in serdes_seq_init + */ +struct cfg_seq serdes_seq_db[SERDES_LAST_SEQ]; + +#define SERDES_VERION "2.0" +#define ENDED_OK "High speed PHY - Ended Successfully\n" + +#define LINK_WAIT_CNTR 100 +#define LINK_WAIT_SLEEP 100 + +#define MAX_UNIT_NUMB 4 +#define TOPOLOGY_TEST_OK 0 +#define WRONG_NUMBER_OF_UNITS 1 +#define SERDES_ALREADY_IN_USE 2 +#define UNIT_NUMBER_VIOLATION 3 + +/* + * serdes_lane_in_use_count contains the exact amount of serdes lanes + * needed per type + */ +u8 serdes_lane_in_use_count[MAX_UNITS_ID][MAX_UNIT_NUMB] = { + /* 0 1 2 3 */ + { 1, 1, 1, 1 }, /* PEX */ + { 1, 1, 1, 1 }, /* ETH_GIG */ + { 1, 1, 0, 0 }, /* USB3H */ + { 1, 1, 1, 0 }, /* USB3D */ + { 1, 1, 1, 1 }, /* SATA */ + { 1, 0, 0, 0 }, /* QSGMII */ + { 4, 0, 0, 0 }, /* XAUI */ + { 2, 0, 0, 0 } /* RXAUI */ +}; + +/* + * serdes_unit_count count unit number. + * (i.e a single XAUI is counted as 1 unit) + */ +u8 serdes_unit_count[MAX_UNITS_ID] = { 0 }; + +/* Selector mapping for A380-A0 and A390-Z1 */ +u8 selectors_serdes_rev2_map[LAST_SERDES_TYPE][MAX_SERDES_LANES] = { + /* 0 1 2 3 4 5 6 */ + { 0x1, 0x1, NA, NA, NA, NA, NA }, /* PEX0 */ + { NA, NA, 0x1, NA, 0x1, NA, 0x1 }, /* PEX1 */ + { NA, NA, NA, NA, 0x7, 0x1, NA }, /* PEX2 */ + { NA, NA, NA, 0x1, NA, NA, NA }, /* PEX3 */ + { 0x2, 0x3, NA, NA, NA, NA, NA }, /* SATA0 */ + { NA, NA, 0x3, NA, NA, NA, NA }, /* SATA1 */ + { NA, NA, NA, NA, 0x6, 0x2, NA }, /* SATA2 */ + { NA, NA, NA, 0x3, NA, NA, NA }, /* SATA3 */ + { 0x3, 0x4, NA, NA, NA, NA, NA }, /* SGMII0 */ + { NA, 0x5, 0x4, NA, 0x3, NA, NA }, /* SGMII1 */ + { NA, NA, NA, 0x4, NA, 0x3, NA }, /* SGMII2 */ + { NA, 0x7, NA, NA, NA, NA, NA }, /* QSGMII */ + { NA, 0x6, NA, NA, 0x4, NA, NA }, /* USB3_HOST0 */ + { NA, NA, NA, 0x5, NA, 0x4, NA }, /* USB3_HOST1 */ + { NA, NA, NA, 0x6, 0x5, 0x5, NA }, /* USB3_DEVICE */ +#ifdef CONFIG_ARMADA_39X + { NA, NA, 0x5, NA, 0x8, NA, 0x2 }, /* SGMII3 */ + { NA, NA, NA, 0x8, 0x9, 0x8, 0x4 }, /* XAUI */ + { NA, NA, NA, NA, NA, 0x8, 0x4 }, /* RXAUI */ +#endif + { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, NA } /* DEFAULT_SERDES */ +}; + +/* Selector mapping for PEX by 4 confiuration */ +u8 common_phys_selectors_pex_by4_lanes[] = { 0x1, 0x2, 0x2, 0x2 }; + +static const char *const serdes_type_to_string[] = { + "PCIe0", + "PCIe1", + "PCIe2", + "PCIe3", + "SATA0", + "SATA1", + "SATA2", + "SATA3", + "SGMII0", + "SGMII1", + "SGMII2", + "QSGMII", + "USB3 HOST0", + "USB3 HOST1", + "USB3 DEVICE", + "SGMII3", + "XAUI", + "RXAUI", + "DEFAULT SERDES", + "LAST_SERDES_TYPE" +}; + +struct serdes_unit_data { + u8 serdes_unit_id; + u8 serdes_unit_num; +}; + +static struct serdes_unit_data serdes_type_to_unit_info[] = { + {PEX_UNIT_ID, 0,}, + {PEX_UNIT_ID, 1,}, + {PEX_UNIT_ID, 2,}, + {PEX_UNIT_ID, 3,}, + {SATA_UNIT_ID, 0,}, + {SATA_UNIT_ID, 1,}, + {SATA_UNIT_ID, 2,}, + {SATA_UNIT_ID, 3,}, + {ETH_GIG_UNIT_ID, 0,}, + {ETH_GIG_UNIT_ID, 1,}, + {ETH_GIG_UNIT_ID, 2,}, + {QSGMII_UNIT_ID, 0,}, + {USB3H_UNIT_ID, 0,}, + {USB3H_UNIT_ID, 1,}, + {USB3D_UNIT_ID, 0,}, + {ETH_GIG_UNIT_ID, 3,}, + {XAUI_UNIT_ID, 0,}, + {RXAUI_UNIT_ID, 0,}, +}; + +/* Sequences DB */ + +/* + * SATA and SGMII + */ + +struct op_params sata_port0_power_up_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, wait_time, + * num_of_loops + */ + /* Access to reg 0x48(OOB param 1) */ + {SATA_VENDOR_PORT_0_REG_ADDR, 0x38000, 0xffffffff, {0x48,}, 0, 0}, + /* OOB Com_wake and Com_reset spacing upper limit data */ + {SATA_VENDOR_PORT_0_REG_DATA, 0x38000, 0xf03f, {0x6018,}, 0, 0}, + /* Access to reg 0xa(PHY Control) */ + {SATA_VENDOR_PORT_0_REG_ADDR, 0x38000, 0xffffffff, {0xa,}, 0, 0}, + /* Rx clk and Tx clk select non-inverted mode */ + {SATA_VENDOR_PORT_0_REG_DATA, 0x38000, 0x3000, {0x0,}, 0, 0}, + /* Power Down Sata addr */ + {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0,}, 0, 0}, + /* Power Down Sata Port 0 */ + {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffff00ff, {0xc40040,}, 0, 0}, +}; + +struct op_params sata_port1_power_up_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, wait_time, + * num_of_loops + */ + /* Access to reg 0x48(OOB param 1) */ + {SATA_VENDOR_PORT_1_REG_ADDR, 0x38000, 0xffffffff, {0x48,}, 0, 0}, + /* OOB Com_wake and Com_reset spacing upper limit data */ + {SATA_VENDOR_PORT_1_REG_DATA, 0x38000, 0xf03f, {0x6018,}, 0, 0}, + /* Access to reg 0xa(PHY Control) */ + {SATA_VENDOR_PORT_1_REG_ADDR, 0x38000, 0xffffffff, {0xa,}, 0, 0}, + /* Rx clk and Tx clk select non-inverted mode */ + {SATA_VENDOR_PORT_1_REG_DATA, 0x38000, 0x3000, {0x0,}, 0, 0}, + /* Power Down Sata addr */ + {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0,}, 0, 0}, + /* Power Down Sata Port 1 */ + {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffff00, {0xc44000,}, 0, 0}, +}; + +/* SATA and SGMII - power up seq */ +struct op_params sata_and_sgmii_power_up_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, SGMII data, + * wait_time, num_of_loops + */ + /* Power Up */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x90006, {0x80002, 0x80002}, + 0, 0}, + /* Unreset */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000, 0x6000}, 0, 0}, + /* Phy Selector */ + {POWER_AND_PLL_CTRL_REG, 0x800, 0x0e0, {0x0, 0x80}, 0, 0}, + /* Ref clock source select */ + {MISC_REG, 0x800, 0x440, {0x440, 0x400}, 0, 0} +}; + +/* SATA and SGMII - speed config seq */ +struct op_params sata_and_sgmii_speed_config_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, + * SGMII (1.25G), SGMII (3.125G), wait_time, num_of_loops + */ + /* Baud Rate */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc00000, + {0x8800000, 0x19800000, 0x22000000}, 0, 0}, + /* Select Baud Rate for SATA only */ + {INTERFACE_REG, 0x800, 0xc00, {0x800, NO_DATA, NO_DATA}, 0, 0}, + /* Phy Gen RX and TX */ + {ISOLATE_REG, 0x800, 0xff, {NO_DATA, 0x66, 0x66}, 0, 0}, + /* Bus Width */ + {LOOPBACK_REG, 0x800, 0xe, {0x4, 0x2, 0x2}, 0, 0} +}; + +/* SATA and SGMII - TX config seq */ +struct op_params sata_and_sgmii_tx_config_params1[] = { + /* + * unitunit_base_reg, unit_offset, mask, SATA data, SGMII data, + * wait_time, num_of_loops + */ + {GLUE_REG, 0x800, 0x1800, {NO_DATA, 0x800}, 0, 0}, + /* Sft Reset pulse */ + {RESET_DFE_REG, 0x800, 0x401, {0x401, 0x401}, 0, 0}, + /* Sft Reset pulse */ + {RESET_DFE_REG, 0x800, 0x401, {0x0, 0x0}, 0, 0}, + /* Power up PLL, RX and TX */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0xf0000, {0x70000, 0x70000}, + 0, 0} +}; + +struct op_params sata_port0_tx_config_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, wait_time, + * num_of_loops + */ + /* Power Down Sata addr */ + {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0}, 0, 0}, + /* Power Down Sata Port 0 */ + {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffff00ff, {0xc40000}, 0, 0}, + /* Regret bit addr */ + {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x4}, 0, 0}, + /* Regret bit data */ + {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffffff, {0x80}, 0, 0} +}; + +struct op_params sata_port1_tx_config_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, wait_time, + * num_of_loops + */ + /* Power Down Sata addr */ + {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0}, 0, 0}, + /* Power Down Sata Port 1 */ + {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffff00, {0xc40000}, 0, 0}, + /* Regret bit addr */ + {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x4}, 0, 0}, + /* Regret bit data */ + {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffffff, {0x80}, 0, 0} +}; + +struct op_params sata_and_sgmii_tx_config_serdes_rev1_params2[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, SGMII data, + * wait_time, num_of_loops + */ + /* Wait for PHY power up sequence to finish */ + {COMMON_PHY_STATUS1_REG, 0x28, 0xc, {0xc, 0xc}, 10, 1000}, + /* Wait for PHY power up sequence to finish */ + {COMMON_PHY_STATUS1_REG, 0x28, 0x1, {0x1, 0x1}, 1, 1000} +}; + +struct op_params sata_and_sgmii_tx_config_serdes_rev2_params2[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, SGMII data, + * wait_time, num_of_loops + */ + /* Wait for PHY power up sequence to finish */ + {COMMON_PHY_STATUS1_REG, 0x28, 0xc, {0xc, 0xc}, 10, 1000}, + /* Assert Rx Init for SGMII */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40000000, {NA, 0x40000000}, + 0, 0}, + /* Assert Rx Init for SATA */ + {ISOLATE_REG, 0x800, 0x400, {0x400, NA}, 0, 0}, + /* Wait for PHY power up sequence to finish */ + {COMMON_PHY_STATUS1_REG, 0x28, 0x1, {0x1, 0x1}, 1, 1000}, + /* De-assert Rx Init for SGMII */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40000000, {NA, 0x0}, 0, 0}, + /* De-assert Rx Init for SATA */ + {ISOLATE_REG, 0x800, 0x400, {0x0, NA}, 0, 0}, + /* os_ph_offset_force (align 90) */ + {RX_REG3, 0x800, 0xff, {0xde, NO_DATA}, 0, 0}, + /* Set os_ph_valid */ + {RX_REG3, 0x800, 0x100, {0x100, NO_DATA}, 0, 0}, + /* Unset os_ph_valid */ + {RX_REG3, 0x800, 0x100, {0x0, NO_DATA}, 0, 0}, +}; + +struct op_params sata_electrical_config_serdes_rev1_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, wait_time, + * num_of_loops + */ + /* enable SSC and DFE update enable */ + {COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x400008, {0x400000,}, 0, 0}, + /* tximpcal_th and rximpcal_th */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x4000,}, 0, 0}, + /* SQ_THRESH and FFE Setting */ + {SQUELCH_FFE_SETTING_REG, 0x800, 0xfff, {0x6cf,}, 0, 0}, + /* G1_TX SLEW, EMPH1 and AMP */ + {G1_SETTINGS_0_REG, 0x800, 0xffff, {0x8a32,}, 0, 0}, + /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9,}, 0, 0}, + /* G2_TX SLEW, EMPH1 and AMP */ + {G2_SETTINGS_0_REG, 0x800, 0xffff, {0x8b5c,}, 0, 0}, + /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2,}, 0, 0}, + /* G3_TX SLEW, EMPH1 and AMP */ + {G3_SETTINGS_0_REG, 0x800, 0xffff, {0xe6e,}, 0, 0}, + /* G3_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G3_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2,}, 0, 0}, + /* Cal rxclkalign90 ext enable and Cal os ph ext */ + {CAL_REG6, 0x800, 0xff00, {0xdd00,}, 0, 0}, + /* Dtl Clamping disable and Dtl clamping Sel(6000ppm) */ + {RX_REG2, 0x800, 0xf0, {0x70,}, 0, 0}, +}; + +struct op_params sata_electrical_config_serdes_rev2_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, wait_time, + * num_of_loops + */ + /* SQ_THRESH and FFE Setting */ + {SQUELCH_FFE_SETTING_REG, 0x800, 0xf00, {0x600}, 0, 0}, + /* enable SSC and DFE update enable */ + {COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x400008, {0x400000}, 0, 0}, + /* G1_TX SLEW, EMPH1 and AMP */ + {G1_SETTINGS_0_REG, 0x800, 0xffff, {0x8a32}, 0, 0}, + /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0}, + /* G2_TX SLEW, EMPH1 and AMP */ + {G2_SETTINGS_0_REG, 0x800, 0xffff, {0x8b5c}, 0, 0}, + /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2}, 0, 0}, + /* G3_TX SLEW, EMPH1 and AMP */ + {G3_SETTINGS_0_REG, 0x800, 0xffff, {0xe6e}, 0, 0}, + /* + * G3_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI & DFE_En Gen3, + * DC wander calibration dis + */ + {G3_SETTINGS_1_REG, 0x800, 0x47ff, {0x7d2}, 0, 0}, + /* Bit[12]=0x0 idle_sync_en */ + {PCIE_REG0, 0x800, 0x1000, {0x0}, 0, 0}, + /* Dtl Clamping disable and Dtl clamping Sel(6000ppm) */ + {RX_REG2, 0x800, 0xf0, {0x70,}, 0, 0}, + /* tximpcal_th and rximpcal_th */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000}, 0, 0}, + /* DFE_STEP_FINE_FX[3:0] =0xa */ + {DFE_REG0, 0x800, 0xa00f, {0x800a}, 0, 0}, + /* DFE_EN and Dis Update control from pin disable */ + {DFE_REG3, 0x800, 0xc000, {0x0}, 0, 0}, + /* FFE Force FFE_REs and cap settings for Gen1 */ + {G1_SETTINGS_3_REG, 0x800, 0xff, {0xcf}, 0, 0}, + /* FFE Force FFE_REs and cap settings for Gen2 */ + {G2_SETTINGS_3_REG, 0x800, 0xff, {0xbf}, 0, 0}, + /* FE Force FFE_REs=4 and cap settings for Gen3n */ + {G3_SETTINGS_3_REG, 0x800, 0xff, {0xcf}, 0, 0}, + /* Set DFE Gen 3 Resolution to 3 */ + {G3_SETTINGS_4_REG, 0x800, 0x300, {0x300}, 0, 0}, +}; + +struct op_params sgmii_electrical_config_serdes_rev1_params[] = { + /* + * unit_base_reg, unit_offset, mask, SGMII (1.25G), SGMII (3.125G), + * wait_time, num_of_loops + */ + /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9, 0x3c9}, 0, 0}, + /* SQ_THRESH and FFE Setting */ + {SQUELCH_FFE_SETTING_REG, 0x800, 0xfff, {0x8f, 0xbf}, 0, 0}, + /* tximpcal_th and rximpcal_th */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x4000, 0x4000}, 0, 0}, +}; + +struct op_params sgmii_electrical_config_serdes_rev2_params[] = { + /* + * unit_base_reg, unit_offset, mask, SGMII (1.25G), SGMII (3.125G), + * wait_time, num_of_loops + */ + /* Set Slew_rate, Emph and Amp */ + {G1_SETTINGS_0_REG, 0x800, 0xffff, {0x8fa, 0x8fa}, 0, 0}, + /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9, 0x3c9}, 0, 0}, + /* DTL_FLOOP_EN */ + {RX_REG2, 0x800, 0x4, {0x0, 0x0}, 0, 0}, + /* G1 FFE Setting Force, RES and CAP */ + {G1_SETTINGS_3_REG, 0x800, 0xff, {0x8f, 0xbf}, 0, 0}, + /* tximpcal_th and rximpcal_th */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000, 0x3000}, 0, 0}, +}; + +/* + * PEX and USB3 + */ + +/* PEX and USB3 - power up seq for Serdes Rev 1.2 */ +struct op_params pex_and_usb3_power_up_serdes_rev1_params[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, USB3 data, + * wait_time, num_of_loops + */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc7f806, + {0x4471804, 0x4479804}, 0, 0}, + {COMMON_PHY_CONFIGURATION2_REG, 0x28, 0x5c, {0x58, 0x58}, 0, 0}, + {COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x3, {0x1, 0x1}, 0, 0}, + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000, 0xe000}, 0, 0}, + {GLOBAL_CLK_CTRL, 0x800, 0xd, {0x5, 0x1}, 0, 0}, + /* Ref clock source select */ + {MISC_REG, 0x800, 0x4c0, {0x80, 0x4c0}, 0, 0} +}; + +/* PEX and USB3 - power up seq for Serdes Rev 2.1 */ +struct op_params pex_and_usb3_power_up_serdes_rev2_params[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, USB3 data, + * wait_time, num_of_loops + */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc7f806, + {0x4471804, 0x4479804}, 0, 0}, + {COMMON_PHY_CONFIGURATION2_REG, 0x28, 0x5c, {0x58, 0x58}, 0, 0}, + {COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x3, {0x1, 0x1}, 0, 0}, + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000, 0xe000}, 0, 0}, + {GLOBAL_CLK_CTRL, 0x800, 0xd, {0x5, 0x1}, 0, 0}, + {GLOBAL_MISC_CTRL, 0x800, 0xc0, {0x0, NO_DATA}, 0, 0}, + /* Ref clock source select */ + {MISC_REG, 0x800, 0x4c0, {0x80, 0x4c0}, 0, 0} +}; + +/* PEX and USB3 - speed config seq */ +struct op_params pex_and_usb3_speed_config_params[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, USB3 data, + * wait_time, num_of_loops + */ + /* Maximal PHY Generation Setting */ + {INTERFACE_REG, 0x800, 0xc00, {0x400, 0x400, 0x400, 0x400, 0x400}, + 0, 0}, +}; + +struct op_params usb3_electrical_config_serdes_rev1_params[] = { + /* Spread Spectrum Clock Enable */ + {LANE_CFG4_REG, 0x800, 0x80, {0x80}, 0, 0}, + /* G2_TX_SSC_AMP[6:0]=4.5k_p_pM and TX emphasis mode=m_v */ + {G2_SETTINGS_2_REG, 0x800, 0xfe40, {0x4440}, 0, 0}, + /* tximpcal_th and rximpcal_th */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x4000}, 0, 0}, + /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2}, 0, 0}, + /* FFE Setting Force, RES and CAP */ + {SQUELCH_FFE_SETTING_REG, 0x800, 0xff, {0xef}, 0, 0}, + /* Dtl Clamping disable and Dtl-clamping-Sel(6000ppm) */ + {RX_REG2, 0x800, 0xf0, {0x70}, 0, 0}, + /* cal_rxclkalign90_ext_en and cal_os_ph_ext */ + {CAL_REG6, 0x800, 0xff00, {0xd500}, 0, 0}, + /* vco_cal_vth_sel */ + {REF_REG0, 0x800, 0x38, {0x20}, 0, 0}, +}; + +struct op_params usb3_electrical_config_serdes_rev2_params[] = { + /* Spread Spectrum Clock Enable */ + {LANE_CFG4_REG, 0x800, 0x80, {0x80}, 0, 0}, + /* G2_TX_SSC_AMP[6:0]=4.5k_p_pM and TX emphasis mode=m_v */ + {G2_SETTINGS_2_REG, 0x800, 0xfe40, {0x4440}, 0, 0}, + /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2}, 0, 0}, + /* Dtl Clamping disable and Dtl-clamping-Sel(6000ppm) */ + {RX_REG2, 0x800, 0xf0, {0x70}, 0, 0}, + /* vco_cal_vth_sel */ + {REF_REG0, 0x800, 0x38, {0x20}, 0, 0}, + /* Spread Spectrum Clock Enable */ + {LANE_CFG5_REG, 0x800, 0x4, {0x4}, 0, 0}, +}; + +/* PEX and USB3 - TX config seq */ + +/* + * For PEXx1: the pex_and_usb3_tx_config_params1/2/3 configurations should run + * one by one on the lane. + * For PEXx4: the pex_and_usb3_tx_config_params1/2/3 configurations should run + * by setting each sequence for all 4 lanes. + */ +struct op_params pex_and_usb3_tx_config_params1[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, USB3 data, + * wait_time, num_of_loops + */ + {GLOBAL_CLK_CTRL, 0x800, 0x1, {0x0, 0x0}, 0, 0}, + /* 10ms delay */ + {0x0, 0x0, 0x0, {0x0, 0x0}, 10, 0}, + /* os_ph_offset_force (align 90) */ + {RX_REG3, 0x800, 0xff, {0xdc, NO_DATA}, 0, 0}, + /* Set os_ph_valid */ + {RX_REG3, 0x800, 0x100, {0x100, NO_DATA}, 0, 0}, + /* Unset os_ph_valid */ + {RX_REG3, 0x800, 0x100, {0x0, NO_DATA}, 0, 0}, +}; + +struct op_params pex_and_usb3_tx_config_params2[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, USB3 data, + * wait_time, num_of_loops + */ + /* Sft Reset pulse */ + {RESET_DFE_REG, 0x800, 0x401, {0x401, 0x401}, 0, 0}, +}; + +struct op_params pex_and_usb3_tx_config_params3[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, USB3 data, + * wait_time, num_of_loops + */ + /* Sft Reset pulse */ + {RESET_DFE_REG, 0x800, 0x401, {0x0, 0x0}, 0, 0}, + /* 10ms delay */ + {0x0, 0x0, 0x0, {0x0, 0x0}, 10, 0} +}; + +/* PEX by 4 config seq */ +struct op_params pex_by4_config_params[] = { + /* unit_base_reg, unit_offset, mask, data, wait_time, num_of_loops */ + {GLOBAL_CLK_SRC_HI, 0x800, 0x7, {0x5, 0x0, 0x0, 0x2}, 0, 0}, + /* Lane Alignement enable */ + {LANE_ALIGN_REG0, 0x800, 0x1000, {0x0, 0x0, 0x0, 0x0}, 0, 0}, + /* Max PLL phy config */ + {CALIBRATION_CTRL_REG, 0x800, 0x1000, {0x1000, 0x1000, 0x1000, 0x1000}, + 0, 0}, + /* Max PLL pipe config */ + {LANE_CFG1_REG, 0x800, 0x600, {0x600, 0x600, 0x600, 0x600}, 0, 0}, +}; + +/* USB3 device donfig seq */ +struct op_params usb3_device_config_params[] = { + /* unit_base_reg, unit_offset, mask, data, wait_time, num_of_loops */ + {LANE_CFG4_REG, 0x800, 0x200, {0x200}, 0, 0} +}; + +/* PEX - electrical configuration seq Rev 1.2 */ +struct op_params pex_electrical_config_serdes_rev1_params[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, wait_time, + * num_of_loops + */ + /* G1_TX_SLEW_CTRL_EN and G1_TX_SLEW_RATE */ + {G1_SETTINGS_0_REG, 0x800, 0xf000, {0xb000}, 0, 0}, + /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0}, + /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0}, + /* CFG_DFE_EN_SEL */ + {LANE_CFG4_REG, 0x800, 0x8, {0x8}, 0, 0}, + /* FFE Setting Force, RES and CAP */ + {SQUELCH_FFE_SETTING_REG, 0x800, 0xff, {0xaf}, 0, 0}, + /* tximpcal_th and rximpcal_th */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000}, 0, 0}, + /* cal_rxclkalign90_ext_en and cal_os_ph_ext */ + {CAL_REG6, 0x800, 0xff00, {0xdc00}, 0, 0}, +}; + +/* PEX - electrical configuration seq Rev 2.1 */ +struct op_params pex_electrical_config_serdes_rev2_params[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, wait_time, + * num_of_loops + */ + /* G1_TX_SLEW_CTRL_EN and G1_TX_SLEW_RATE */ + {G1_SETTINGS_0_REG, 0x800, 0xf000, {0xb000}, 0, 0}, + /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0}, + /* G1 FFE Setting Force, RES and CAP */ + {G1_SETTINGS_3_REG, 0x800, 0xff, {0xcf}, 0, 0}, + /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0}, + /* G2 FFE Setting Force, RES and CAP */ + {G2_SETTINGS_3_REG, 0x800, 0xff, {0xaf}, 0, 0}, + /* G2 DFE resolution value */ + {G2_SETTINGS_4_REG, 0x800, 0x300, {0x300}, 0, 0}, + /* DFE resolution force */ + {DFE_REG0, 0x800, 0x8000, {0x8000}, 0, 0}, + /* Tx amplitude for Tx Margin 0 */ + {PCIE_REG1, 0x800, 0xf80, {0xd00}, 0, 0}, + /* Tx_Emph value for -3.5d_b and -6d_b */ + {PCIE_REG3, 0x800, 0xff00, {0xaf00}, 0, 0}, + /* CFG_DFE_EN_SEL */ + {LANE_CFG4_REG, 0x800, 0x8, {0x8}, 0, 0}, + /* tximpcal_th and rximpcal_th */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000}, 0, 0}, +}; + +/* PEX - configuration seq for REF_CLOCK_25MHz */ +struct op_params pex_config_ref_clock25_m_hz[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, wait_time, + * num_of_loops + */ + /* Bits[4:0]=0x2 - REF_FREF_SEL */ + {POWER_AND_PLL_CTRL_REG, 0x800, 0x1f, {0x2}, 0, 0}, + /* Bit[10]=0x1 - REFCLK_SEL */ + {MISC_REG, 0x800, 0x400, {0x400}, 0, 0}, + /* Bits[7:0]=0x7 - CFG_PM_RXDLOZ_WAIT */ + {GLOBAL_PM_CTRL, 0x800, 0xff, {0x7}, 0, 0}, +}; + +/* PEX - configuration seq for REF_CLOCK_40MHz */ +struct op_params pex_config_ref_clock40_m_hz[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, wait_time, + * num_of_loops + */ + /* Bits[4:0]=0x3 - REF_FREF_SEL */ + {POWER_AND_PLL_CTRL_REG, 0x800, 0x1f, {0x3}, 0, 0}, + /* Bits[10]=0x1 - REFCLK_SEL */ + {MISC_REG, 0x800, 0x400, {0x400}, 0, 0}, + /* Bits[7:0]=0xc - CFG_PM_RXDLOZ_WAIT */ + {GLOBAL_PM_CTRL, 0x800, 0xff, {0xc}, 0, 0}, +}; + +/* PEX - configuration seq for REF_CLOCK_100MHz */ +struct op_params pex_config_ref_clock100_m_hz[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, wait_time, + * num_of_loops + */ + /* Bits[4:0]=0x0 - REF_FREF_SEL */ + {POWER_AND_PLL_CTRL_REG, 0x800, 0x1f, {0x0}, 0, 0}, + /* Bit[10]=0x0 - REFCLK_SEL */ + {MISC_REG, 0x800, 0x400, {0x0}, 0, 0}, + /* Bits[7:0]=0x1e - CFG_PM_RXDLOZ_WAIT */ + {GLOBAL_PM_CTRL, 0x800, 0xff, {0x1e}, 0, 0}, +}; + +/* + * USB2 + */ + +struct op_params usb2_power_up_params[] = { + /* + * unit_base_reg, unit_offset, mask, USB2 data, wait_time, + * num_of_loops + */ + /* Init phy 0 */ + {0x18440, 0x0 /*NA*/, 0xffffffff, {0x62}, 0, 0}, + /* Init phy 1 */ + {0x18444, 0x0 /*NA*/, 0xffffffff, {0x62}, 0, 0}, + /* Init phy 2 */ + {0x18448, 0x0 /*NA*/, 0xffffffff, {0x62}, 0, 0}, + /* Phy offset 0x0 - PLL_CONTROL0 */ + {0xc0000, 0x0 /*NA*/, 0xffffffff, {0x40605205}, 0, 0}, + {0xc001c, 0x0 /*NA*/, 0xffffffff, {0x39f16ce}, 0, 0}, + {0xc201c, 0x0 /*NA*/, 0xffffffff, {0x39f16ce}, 0, 0}, + {0xc401c, 0x0 /*NA*/, 0xffffffff, {0x39f16ce}, 0, 0}, + /* Phy offset 0x1 - PLL_CONTROL1 */ + {0xc0004, 0x0 /*NA*/, 0x1, {0x1}, 0, 0}, + /* Phy0 register 3 - TX Channel control 0 */ + {0xc000c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0}, + /* Phy0 register 3 - TX Channel control 0 */ + {0xc200c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0}, + /* Phy0 register 3 - TX Channel control 0 */ + {0xc400c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0}, + /* check PLLCAL_DONE is set and IMPCAL_DONE is set */ + {0xc0008, 0x0 /*NA*/, 0x80800000, {0x80800000}, 1, 1000}, + /* check REG_SQCAL_DONE is set */ + {0xc0018, 0x0 /*NA*/, 0x80000000, {0x80000000}, 1, 1000}, + /* check PLL_READY is set */ + {0xc0000, 0x0 /*NA*/, 0x80000000, {0x80000000}, 1, 1000} +}; + +/* + * QSGMII + */ + +/* QSGMII - power up seq */ +struct op_params qsgmii_port_power_up_params[] = { + /* + * unit_base_reg, unit_offset, mask, QSGMII data, wait_time, + * num_of_loops + */ + /* Connect the QSGMII to Gigabit Ethernet units */ + {QSGMII_CONTROL_REG1, 0x0, 0x40000000, {0x40000000}, 0, 0}, + /* Power Up */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0xf0006, {0x80002}, 0, 0}, + /* Unreset */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000}, 0, 0}, + /* Phy Selector */ + {POWER_AND_PLL_CTRL_REG, 0x800, 0xff, {0xfc81}, 0, 0}, + /* Ref clock source select */ + {MISC_REG, 0x800, 0x4c0, {0x480}, 0, 0} +}; + +/* QSGMII - speed config seq */ +struct op_params qsgmii_port_speed_config_params[] = { + /* + * unit_base_reg, unit_offset, mask, QSGMII data, wait_time, + * num_of_loops + */ + /* Baud Rate */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc00000, {0xcc00000}, 0, 0}, + /* Phy Gen RX and TX */ + {ISOLATE_REG, 0x800, 0xff, {0x33}, 0, 0}, + /* Bus Width */ + {LOOPBACK_REG, 0x800, 0xe, {0x2}, 0, 0} +}; + +/* QSGMII - Select electrical param seq */ +struct op_params qsgmii_port_electrical_config_params[] = { + /* + * unit_base_reg, unit_offset, mask, QSGMII data, wait_time, + * num_of_loops + */ + /* Slew rate and emphasis */ + {G1_SETTINGS_0_REG, 0x800, 0x8000, {0x0}, 0, 0} +}; + +/* QSGMII - TX config seq */ +struct op_params qsgmii_port_tx_config_params1[] = { + /* + * unit_base_reg, unit_offset, mask, QSGMII data, wait_time, + * num_of_loops + */ + {GLUE_REG, 0x800, 0x1800, {0x800}, 0, 0}, + /* Sft Reset pulse */ + {RESET_DFE_REG, 0x800, 0x401, {0x401}, 0, 0}, + /* Sft Reset pulse */ + {RESET_DFE_REG, 0x800, 0x401, {0x0}, 0, 0}, + /* Lane align */ + {LANE_ALIGN_REG0, 0x800, 0x1000, {0x1000}, 0, 0}, + /* Power up PLL, RX and TX */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x70000, {0x70000}, 0, 0}, + /* Tx driver output idle */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x80000, {0x80000}, 0, 0} +}; + +struct op_params qsgmii_port_tx_config_params2[] = { + /* + * unit_base_reg, unit_offset, mask, QSGMII data, wait_time, + * num_of_loops + */ + /* Wait for PHY power up sequence to finish */ + {COMMON_PHY_STATUS1_REG, 0x28, 0xc, {0xc}, 10, 1000}, + /* Assert Rx Init and Tx driver output valid */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40080000, {0x40000000}, 0, 0}, + /* Wait for PHY power up sequence to finish */ + {COMMON_PHY_STATUS1_REG, 0x28, 0x1, {0x1}, 1, 1000}, + /* De-assert Rx Init */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40000000, {0x0}, 0, 0} +}; + +/* SERDES_POWER_DOWN */ +struct op_params serdes_power_down_params[] = { + {COMMON_PHY_CONFIGURATION1_REG, 0x28, (0xf << 11), {(0x3 << 11)}, + 0, 0}, + {COMMON_PHY_CONFIGURATION1_REG, 0x28, (0x7 << 16), {0}, 0, 0} +}; + +/* + * hws_ctrl_serdes_rev_get + * + * DESCRIPTION: Get the Serdes revision number + * + * INPUT: config_field - Field description enum + * + * OUTPUT: None + * + * RETURN: + * 8bit Serdes revision number + */ +u8 hws_ctrl_serdes_rev_get(void) +{ +#ifdef CONFIG_ARMADA_38X + /* for A38x-Z1 */ + if (sys_env_device_rev_get() == MV_88F68XX_Z1_ID) + return MV_SERDES_REV_1_2; +#endif + + /* for A39x-Z1, A38x-A0 */ + return MV_SERDES_REV_2_1; +} + +u32 hws_serdes_topology_verify(enum serdes_type serdes_type, u32 serdes_id, + enum serdes_mode serdes_mode) +{ + u32 test_result = 0; + u8 serd_max_num, unit_numb; + enum unit_id unit_id; + + if (serdes_type > RXAUI) { + printf("%s: Warning: Wrong serdes type %s serdes#%d\n", + __func__, serdes_type_to_string[serdes_type], serdes_id); + return MV_FAIL; + } + + unit_id = serdes_type_to_unit_info[serdes_type].serdes_unit_id; + unit_numb = serdes_type_to_unit_info[serdes_type].serdes_unit_num; + serd_max_num = sys_env_unit_max_num_get(unit_id); + + /* if didn't exceed amount of required Serdes lanes for current type */ + if (serdes_lane_in_use_count[unit_id][unit_numb] != 0) { + /* update amount of required Serdes lanes for current type */ + serdes_lane_in_use_count[unit_id][unit_numb]--; + + /* + * If reached the exact amount of required Serdes lanes for + * current type + */ + if (serdes_lane_in_use_count[unit_id][unit_numb] == 0) { + if (((serdes_type <= PEX3)) && + ((serdes_mode == PEX_END_POINT_X4) || + (serdes_mode == PEX_ROOT_COMPLEX_X4))) { + /* PCiex4 uses 2 SerDes */ + serdes_unit_count[PEX_UNIT_ID] += 2; + } else { + serdes_unit_count[unit_id]++; + } + + /* test SoC unit count limitation */ + if (serdes_unit_count[unit_id] > serd_max_num) { + test_result = WRONG_NUMBER_OF_UNITS; + } else if (unit_numb >= serd_max_num) { + /* test SoC unit number limitation */ + test_result = UNIT_NUMBER_VIOLATION; + } + } + } else { + test_result = SERDES_ALREADY_IN_USE; + if (test_result == SERDES_ALREADY_IN_USE) { + printf("%s: Error: serdes lane %d is configured to type %s: type already in use\n", + __func__, serdes_id, + serdes_type_to_string[serdes_type]); + return MV_FAIL; + } else if (test_result == WRONG_NUMBER_OF_UNITS) { + printf("%s: Warning: serdes lane %d is set to type %s.\n", + __func__, serdes_id, + serdes_type_to_string[serdes_type]); + printf("%s: Maximum supported lanes are already set to this type (limit = %d)\n", + __func__, serd_max_num); + return MV_FAIL; + } else if (test_result == UNIT_NUMBER_VIOLATION) { + printf("%s: Warning: serdes lane %d type is %s: current device support only %d units of this type.\n", + __func__, serdes_id, + serdes_type_to_string[serdes_type], + serd_max_num); + return MV_FAIL; + } + } + + return MV_OK; +} + +void hws_serdes_xaui_topology_verify(void) +{ + /* + * If XAUI is in use - serdes_lane_in_use_count has to be = 0; + * if it is not in use hast be = 4 + */ + if ((serdes_lane_in_use_count[XAUI_UNIT_ID][0] != 0) && + (serdes_lane_in_use_count[XAUI_UNIT_ID][0] != 4)) { + printf("%s: Warning: wrong number of lanes is set to XAUI - %d\n", + __func__, serdes_lane_in_use_count[XAUI_UNIT_ID][0]); + printf("%s: XAUI has to be defined on 4 lanes\n", __func__); + } + + /* + * If RXAUI is in use - serdes_lane_in_use_count has to be = 0; + * if it is not in use hast be = 2 + */ + if ((serdes_lane_in_use_count[RXAUI_UNIT_ID][0] != 0) && + (serdes_lane_in_use_count[RXAUI_UNIT_ID][0] != 2)) { + printf("%s: Warning: wrong number of lanes is set to RXAUI - %d\n", + __func__, serdes_lane_in_use_count[RXAUI_UNIT_ID][0]); + printf("%s: RXAUI has to be defined on 2 lanes\n", __func__); + } +} + +int hws_serdes_seq_db_init(void) +{ + u8 serdes_rev = hws_ctrl_serdes_rev_get(); + + DEBUG_INIT_FULL_S("\n### serdes_seq38x_init ###\n"); + + if (serdes_rev == MV_SERDES_REV_NA) { + printf("hws_serdes_seq_db_init: serdes revision number is not supported\n"); + return MV_NOT_SUPPORTED; + } + + /* SATA_PORT_0_ONLY_POWER_UP_SEQ sequence init */ + serdes_seq_db[SATA_PORT_0_ONLY_POWER_UP_SEQ].op_params_ptr = + sata_port0_power_up_params; + serdes_seq_db[SATA_PORT_0_ONLY_POWER_UP_SEQ].cfg_seq_size = + sizeof(sata_port0_power_up_params) / sizeof(struct op_params); + serdes_seq_db[SATA_PORT_0_ONLY_POWER_UP_SEQ].data_arr_idx = SATA; + + /* SATA_PORT_1_ONLY_POWER_UP_SEQ sequence init */ + serdes_seq_db[SATA_PORT_1_ONLY_POWER_UP_SEQ].op_params_ptr = + sata_port1_power_up_params; + serdes_seq_db[SATA_PORT_1_ONLY_POWER_UP_SEQ].cfg_seq_size = + sizeof(sata_port1_power_up_params) / sizeof(struct op_params); + serdes_seq_db[SATA_PORT_1_ONLY_POWER_UP_SEQ].data_arr_idx = SATA; + + /* SATA_POWER_UP_SEQ sequence init */ + serdes_seq_db[SATA_POWER_UP_SEQ].op_params_ptr = + sata_and_sgmii_power_up_params; + serdes_seq_db[SATA_POWER_UP_SEQ].cfg_seq_size = + sizeof(sata_and_sgmii_power_up_params) / sizeof(struct op_params); + serdes_seq_db[SATA_POWER_UP_SEQ].data_arr_idx = SATA; + + /* SATA_1_5_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[SATA_1_5_SPEED_CONFIG_SEQ].op_params_ptr = + sata_and_sgmii_speed_config_params; + serdes_seq_db[SATA_1_5_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_and_sgmii_speed_config_params) / + sizeof(struct op_params); + serdes_seq_db[SATA_1_5_SPEED_CONFIG_SEQ].data_arr_idx = SATA; + + /* SATA_3_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[SATA_3_SPEED_CONFIG_SEQ].op_params_ptr = + sata_and_sgmii_speed_config_params; + serdes_seq_db[SATA_3_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_and_sgmii_speed_config_params) / + sizeof(struct op_params); + serdes_seq_db[SATA_3_SPEED_CONFIG_SEQ].data_arr_idx = SATA; + + /* SATA_6_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[SATA_6_SPEED_CONFIG_SEQ].op_params_ptr = + sata_and_sgmii_speed_config_params; + serdes_seq_db[SATA_6_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_and_sgmii_speed_config_params) / + sizeof(struct op_params); + serdes_seq_db[SATA_6_SPEED_CONFIG_SEQ].data_arr_idx = SATA; + + /* SATA_ELECTRICAL_CONFIG_SEQ seq sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + sata_electrical_config_serdes_rev1_params; + serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_electrical_config_serdes_rev1_params) / + sizeof(struct op_params); + } else { + serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + sata_electrical_config_serdes_rev2_params; + serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_electrical_config_serdes_rev2_params) / + sizeof(struct op_params); + } + serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].data_arr_idx = SATA; + + /* SATA_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[SATA_TX_CONFIG_SEQ1].op_params_ptr = + sata_and_sgmii_tx_config_params1; + serdes_seq_db[SATA_TX_CONFIG_SEQ1].cfg_seq_size = + sizeof(sata_and_sgmii_tx_config_params1) / sizeof(struct op_params); + serdes_seq_db[SATA_TX_CONFIG_SEQ1].data_arr_idx = SATA; + + /* SATA_PORT_0_ONLY_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[SATA_PORT_0_ONLY_TX_CONFIG_SEQ].op_params_ptr = + sata_port0_tx_config_params; + serdes_seq_db[SATA_PORT_0_ONLY_TX_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_port0_tx_config_params) / sizeof(struct op_params); + serdes_seq_db[SATA_PORT_0_ONLY_TX_CONFIG_SEQ].data_arr_idx = SATA; + + /* SATA_PORT_1_ONLY_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[SATA_PORT_1_ONLY_TX_CONFIG_SEQ].op_params_ptr = + sata_port1_tx_config_params; + serdes_seq_db[SATA_PORT_1_ONLY_TX_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_port1_tx_config_params) / sizeof(struct op_params); + serdes_seq_db[SATA_PORT_1_ONLY_TX_CONFIG_SEQ].data_arr_idx = SATA; + + /* SATA_TX_CONFIG_SEQ2 sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[SATA_TX_CONFIG_SEQ2].op_params_ptr = + sata_and_sgmii_tx_config_serdes_rev1_params2; + serdes_seq_db[SATA_TX_CONFIG_SEQ2].cfg_seq_size = + sizeof(sata_and_sgmii_tx_config_serdes_rev1_params2) / + sizeof(struct op_params); + } else { + serdes_seq_db[SATA_TX_CONFIG_SEQ2].op_params_ptr = + sata_and_sgmii_tx_config_serdes_rev2_params2; + serdes_seq_db[SATA_TX_CONFIG_SEQ2].cfg_seq_size = + sizeof(sata_and_sgmii_tx_config_serdes_rev2_params2) / + sizeof(struct op_params); + } + serdes_seq_db[SATA_TX_CONFIG_SEQ2].data_arr_idx = SATA; + + /* SGMII_POWER_UP_SEQ sequence init */ + serdes_seq_db[SGMII_POWER_UP_SEQ].op_params_ptr = + sata_and_sgmii_power_up_params; + serdes_seq_db[SGMII_POWER_UP_SEQ].cfg_seq_size = + sizeof(sata_and_sgmii_power_up_params) / sizeof(struct op_params); + serdes_seq_db[SGMII_POWER_UP_SEQ].data_arr_idx = SGMII; + + /* SGMII_1_25_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[SGMII_1_25_SPEED_CONFIG_SEQ].op_params_ptr = + sata_and_sgmii_speed_config_params; + serdes_seq_db[SGMII_1_25_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_and_sgmii_speed_config_params) / + sizeof(struct op_params); + serdes_seq_db[SGMII_1_25_SPEED_CONFIG_SEQ].data_arr_idx = SGMII; + + /* SGMII_3_125_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[SGMII_3_125_SPEED_CONFIG_SEQ].op_params_ptr = + sata_and_sgmii_speed_config_params; + serdes_seq_db[SGMII_3_125_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_and_sgmii_speed_config_params) / + sizeof(struct op_params); + serdes_seq_db[SGMII_3_125_SPEED_CONFIG_SEQ].data_arr_idx = SGMII_3_125; + + /* SGMII_ELECTRICAL_CONFIG_SEQ seq sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + sgmii_electrical_config_serdes_rev1_params; + serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(sgmii_electrical_config_serdes_rev1_params) / + sizeof(struct op_params); + } else { + serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + sgmii_electrical_config_serdes_rev2_params; + serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(sgmii_electrical_config_serdes_rev2_params) / + sizeof(struct op_params); + } + serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].data_arr_idx = SGMII; + + /* SGMII_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[SGMII_TX_CONFIG_SEQ1].op_params_ptr = + sata_and_sgmii_tx_config_params1; + serdes_seq_db[SGMII_TX_CONFIG_SEQ1].cfg_seq_size = + sizeof(sata_and_sgmii_tx_config_params1) / sizeof(struct op_params); + serdes_seq_db[SGMII_TX_CONFIG_SEQ1].data_arr_idx = SGMII; + + /* SGMII_TX_CONFIG_SEQ sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[SGMII_TX_CONFIG_SEQ2].op_params_ptr = + sata_and_sgmii_tx_config_serdes_rev1_params2; + serdes_seq_db[SGMII_TX_CONFIG_SEQ2].cfg_seq_size = + sizeof(sata_and_sgmii_tx_config_serdes_rev1_params2) / + sizeof(struct op_params); + } else { + serdes_seq_db[SGMII_TX_CONFIG_SEQ2].op_params_ptr = + sata_and_sgmii_tx_config_serdes_rev2_params2; + serdes_seq_db[SGMII_TX_CONFIG_SEQ2].cfg_seq_size = + sizeof(sata_and_sgmii_tx_config_serdes_rev2_params2) / + sizeof(struct op_params); + } + serdes_seq_db[SGMII_TX_CONFIG_SEQ2].data_arr_idx = SGMII; + + /* PEX_POWER_UP_SEQ sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[PEX_POWER_UP_SEQ].op_params_ptr = + pex_and_usb3_power_up_serdes_rev1_params; + serdes_seq_db[PEX_POWER_UP_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_power_up_serdes_rev1_params) / + sizeof(struct op_params); + } else { + serdes_seq_db[PEX_POWER_UP_SEQ].op_params_ptr = + pex_and_usb3_power_up_serdes_rev2_params; + serdes_seq_db[PEX_POWER_UP_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_power_up_serdes_rev2_params) / + sizeof(struct op_params); + } + serdes_seq_db[PEX_POWER_UP_SEQ].data_arr_idx = PEX; + + /* PEX_2_5_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[PEX_2_5_SPEED_CONFIG_SEQ].op_params_ptr = + pex_and_usb3_speed_config_params; + serdes_seq_db[PEX_2_5_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params); + serdes_seq_db[PEX_2_5_SPEED_CONFIG_SEQ].data_arr_idx = + PEXSERDES_SPEED_2_5_GBPS; + + /* PEX_5_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[PEX_5_SPEED_CONFIG_SEQ].op_params_ptr = + pex_and_usb3_speed_config_params; + serdes_seq_db[PEX_5_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params); + serdes_seq_db[PEX_5_SPEED_CONFIG_SEQ].data_arr_idx = + PEXSERDES_SPEED_5_GBPS; + + /* PEX_ELECTRICAL_CONFIG_SEQ seq sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + pex_electrical_config_serdes_rev1_params; + serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(pex_electrical_config_serdes_rev1_params) / + sizeof(struct op_params); + } else { + serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + pex_electrical_config_serdes_rev2_params; + serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(pex_electrical_config_serdes_rev2_params) / + sizeof(struct op_params); + } + serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].data_arr_idx = PEX; + + /* PEX_TX_CONFIG_SEQ1 sequence init */ + serdes_seq_db[PEX_TX_CONFIG_SEQ1].op_params_ptr = + pex_and_usb3_tx_config_params1; + serdes_seq_db[PEX_TX_CONFIG_SEQ1].cfg_seq_size = + sizeof(pex_and_usb3_tx_config_params1) / sizeof(struct op_params); + serdes_seq_db[PEX_TX_CONFIG_SEQ1].data_arr_idx = PEX; + + /* PEX_TX_CONFIG_SEQ2 sequence init */ + serdes_seq_db[PEX_TX_CONFIG_SEQ2].op_params_ptr = + pex_and_usb3_tx_config_params2; + serdes_seq_db[PEX_TX_CONFIG_SEQ2].cfg_seq_size = + sizeof(pex_and_usb3_tx_config_params2) / sizeof(struct op_params); + serdes_seq_db[PEX_TX_CONFIG_SEQ2].data_arr_idx = PEX; + + /* PEX_TX_CONFIG_SEQ3 sequence init */ + serdes_seq_db[PEX_TX_CONFIG_SEQ3].op_params_ptr = + pex_and_usb3_tx_config_params3; + serdes_seq_db[PEX_TX_CONFIG_SEQ3].cfg_seq_size = + sizeof(pex_and_usb3_tx_config_params3) / sizeof(struct op_params); + serdes_seq_db[PEX_TX_CONFIG_SEQ3].data_arr_idx = PEX; + + /* PEX_BY_4_CONFIG_SEQ sequence init */ + serdes_seq_db[PEX_BY_4_CONFIG_SEQ].op_params_ptr = + pex_by4_config_params; + serdes_seq_db[PEX_BY_4_CONFIG_SEQ].cfg_seq_size = + sizeof(pex_by4_config_params) / sizeof(struct op_params); + serdes_seq_db[PEX_BY_4_CONFIG_SEQ].data_arr_idx = PEX; + + /* PEX_CONFIG_REF_CLOCK_25MHZ_SEQ sequence init */ + serdes_seq_db[PEX_CONFIG_REF_CLOCK_25MHZ_SEQ].op_params_ptr = + pex_config_ref_clock25_m_hz; + serdes_seq_db[PEX_CONFIG_REF_CLOCK_25MHZ_SEQ].cfg_seq_size = + sizeof(pex_config_ref_clock25_m_hz) / sizeof(struct op_params); + serdes_seq_db[PEX_CONFIG_REF_CLOCK_25MHZ_SEQ].data_arr_idx = PEX; + + /* PEX_ELECTRICAL_CONFIG_REF_CLOCK_40MHZ_SEQ sequence init */ + serdes_seq_db[PEX_CONFIG_REF_CLOCK_40MHZ_SEQ].op_params_ptr = + pex_config_ref_clock40_m_hz; + serdes_seq_db[PEX_CONFIG_REF_CLOCK_40MHZ_SEQ].cfg_seq_size = + sizeof(pex_config_ref_clock40_m_hz) / sizeof(struct op_params); + serdes_seq_db[PEX_CONFIG_REF_CLOCK_40MHZ_SEQ].data_arr_idx = PEX; + + /* PEX_CONFIG_REF_CLOCK_100MHZ_SEQ sequence init */ + serdes_seq_db[PEX_CONFIG_REF_CLOCK_100MHZ_SEQ].op_params_ptr = + pex_config_ref_clock100_m_hz; + serdes_seq_db[PEX_CONFIG_REF_CLOCK_100MHZ_SEQ].cfg_seq_size = + sizeof(pex_config_ref_clock100_m_hz) / sizeof(struct op_params); + serdes_seq_db[PEX_CONFIG_REF_CLOCK_100MHZ_SEQ].data_arr_idx = PEX; + + /* USB3_POWER_UP_SEQ sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[USB3_POWER_UP_SEQ].op_params_ptr = + pex_and_usb3_power_up_serdes_rev1_params; + serdes_seq_db[USB3_POWER_UP_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_power_up_serdes_rev1_params) / + sizeof(struct op_params); + } else { + serdes_seq_db[USB3_POWER_UP_SEQ].op_params_ptr = + pex_and_usb3_power_up_serdes_rev2_params; + serdes_seq_db[USB3_POWER_UP_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_power_up_serdes_rev2_params) / + sizeof(struct op_params); + } + serdes_seq_db[USB3_POWER_UP_SEQ].data_arr_idx = USB3; + + /* USB3_HOST_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[USB3_HOST_SPEED_CONFIG_SEQ].op_params_ptr = + pex_and_usb3_speed_config_params; + serdes_seq_db[USB3_HOST_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params); + serdes_seq_db[USB3_HOST_SPEED_CONFIG_SEQ].data_arr_idx = + USB3SERDES_SPEED_5_GBPS_HOST; + + /* USB3_DEVICE_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[USB3_DEVICE_SPEED_CONFIG_SEQ].op_params_ptr = + pex_and_usb3_speed_config_params; + serdes_seq_db[USB3_DEVICE_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params); + serdes_seq_db[USB3_DEVICE_SPEED_CONFIG_SEQ].data_arr_idx = + USB3SERDES_SPEED_5_GBPS_DEVICE; + + /* USB3_ELECTRICAL_CONFIG_SEQ seq sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + usb3_electrical_config_serdes_rev1_params; + serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(usb3_electrical_config_serdes_rev1_params) / + sizeof(struct op_params); + } else { + serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + usb3_electrical_config_serdes_rev2_params; + serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(usb3_electrical_config_serdes_rev2_params) / + sizeof(struct op_params); + } + serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].data_arr_idx = USB3; + + /* USB3_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[USB3_TX_CONFIG_SEQ1].op_params_ptr = + pex_and_usb3_tx_config_params1; + serdes_seq_db[USB3_TX_CONFIG_SEQ1].cfg_seq_size = + sizeof(pex_and_usb3_tx_config_params1) / sizeof(struct op_params); + serdes_seq_db[USB3_TX_CONFIG_SEQ1].data_arr_idx = USB3; + + /* USB3_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[USB3_TX_CONFIG_SEQ2].op_params_ptr = + pex_and_usb3_tx_config_params2; + serdes_seq_db[USB3_TX_CONFIG_SEQ2].cfg_seq_size = + sizeof(pex_and_usb3_tx_config_params2) / sizeof(struct op_params); + serdes_seq_db[USB3_TX_CONFIG_SEQ2].data_arr_idx = USB3; + + /* USB3_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[USB3_TX_CONFIG_SEQ3].op_params_ptr = + pex_and_usb3_tx_config_params3; + serdes_seq_db[USB3_TX_CONFIG_SEQ3].cfg_seq_size = + sizeof(pex_and_usb3_tx_config_params3) / sizeof(struct op_params); + serdes_seq_db[USB3_TX_CONFIG_SEQ3].data_arr_idx = USB3; + + /* USB2_POWER_UP_SEQ sequence init */ + serdes_seq_db[USB2_POWER_UP_SEQ].op_params_ptr = usb2_power_up_params; + serdes_seq_db[USB2_POWER_UP_SEQ].cfg_seq_size = + sizeof(usb2_power_up_params) / sizeof(struct op_params); + serdes_seq_db[USB2_POWER_UP_SEQ].data_arr_idx = 0; + + /* USB3_DEVICE_CONFIG_SEQ sequence init */ + serdes_seq_db[USB3_DEVICE_CONFIG_SEQ].op_params_ptr = + usb3_device_config_params; + serdes_seq_db[USB3_DEVICE_CONFIG_SEQ].cfg_seq_size = + sizeof(usb3_device_config_params) / sizeof(struct op_params); + serdes_seq_db[USB3_DEVICE_CONFIG_SEQ].data_arr_idx = 0; /* Not relevant */ + + /* SERDES_POWER_DOWN_SEQ sequence init */ + serdes_seq_db[SERDES_POWER_DOWN_SEQ].op_params_ptr = + serdes_power_down_params; + serdes_seq_db[SERDES_POWER_DOWN_SEQ].cfg_seq_size = + sizeof(serdes_power_down_params) / + sizeof(struct op_params); + serdes_seq_db[SERDES_POWER_DOWN_SEQ].data_arr_idx = FIRST_CELL; + + if (serdes_rev == MV_SERDES_REV_2_1) { + /* QSGMII_POWER_UP_SEQ sequence init */ + serdes_seq_db[QSGMII_POWER_UP_SEQ].op_params_ptr = + qsgmii_port_power_up_params; + serdes_seq_db[QSGMII_POWER_UP_SEQ].cfg_seq_size = + sizeof(qsgmii_port_power_up_params) / + sizeof(struct op_params); + serdes_seq_db[QSGMII_POWER_UP_SEQ].data_arr_idx = + QSGMII_SEQ_IDX; + + /* QSGMII_5_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[QSGMII_5_SPEED_CONFIG_SEQ].op_params_ptr = + qsgmii_port_speed_config_params; + serdes_seq_db[QSGMII_5_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(qsgmii_port_speed_config_params) / + sizeof(struct op_params); + serdes_seq_db[QSGMII_5_SPEED_CONFIG_SEQ].data_arr_idx = + QSGMII_SEQ_IDX; + + /* QSGMII_ELECTRICAL_CONFIG_SEQ seq sequence init */ + serdes_seq_db[QSGMII_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + qsgmii_port_electrical_config_params; + serdes_seq_db[QSGMII_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(qsgmii_port_electrical_config_params) / + sizeof(struct op_params); + serdes_seq_db[QSGMII_ELECTRICAL_CONFIG_SEQ].data_arr_idx = + QSGMII_SEQ_IDX; + + /* QSGMII_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[QSGMII_TX_CONFIG_SEQ1].op_params_ptr = + qsgmii_port_tx_config_params1; + serdes_seq_db[QSGMII_TX_CONFIG_SEQ1].cfg_seq_size = + sizeof(qsgmii_port_tx_config_params1) / + sizeof(struct op_params); + serdes_seq_db[QSGMII_TX_CONFIG_SEQ1].data_arr_idx = + QSGMII_SEQ_IDX; + + /* QSGMII_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[QSGMII_TX_CONFIG_SEQ2].op_params_ptr = + qsgmii_port_tx_config_params2; + serdes_seq_db[QSGMII_TX_CONFIG_SEQ2].cfg_seq_size = + sizeof(qsgmii_port_tx_config_params2) / + sizeof(struct op_params); + serdes_seq_db[QSGMII_TX_CONFIG_SEQ2].data_arr_idx = + QSGMII_SEQ_IDX; + } + + return MV_OK; +} + +enum serdes_seq serdes_type_and_speed_to_speed_seq(enum serdes_type serdes_type, + enum serdes_speed baud_rate) +{ + enum serdes_seq seq_id = SERDES_LAST_SEQ; + + DEBUG_INIT_FULL_S("\n### serdes_type_and_speed_to_speed_seq ###\n"); + switch (serdes_type) { + case PEX0: + case PEX1: + case PEX2: + case PEX3: + if (baud_rate == SERDES_SPEED_2_5_GBPS) + seq_id = PEX_2_5_SPEED_CONFIG_SEQ; + else if (baud_rate == SERDES_SPEED_5_GBPS) + seq_id = PEX_5_SPEED_CONFIG_SEQ; + break; + case USB3_HOST0: + case USB3_HOST1: + if (baud_rate == SERDES_SPEED_5_GBPS) + seq_id = USB3_HOST_SPEED_CONFIG_SEQ; + break; + case USB3_DEVICE: + if (baud_rate == SERDES_SPEED_5_GBPS) + seq_id = USB3_DEVICE_SPEED_CONFIG_SEQ; + break; + case SATA0: + case SATA1: + case SATA2: + case SATA3: + if (baud_rate == SERDES_SPEED_1_5_GBPS) + seq_id = SATA_1_5_SPEED_CONFIG_SEQ; + else if (baud_rate == SERDES_SPEED_3_GBPS) + seq_id = SATA_3_SPEED_CONFIG_SEQ; + else if (baud_rate == SERDES_SPEED_6_GBPS) + seq_id = SATA_6_SPEED_CONFIG_SEQ; + break; + case SGMII0: + case SGMII1: + case SGMII2: +#ifdef CONFIG_ARMADA_39X + case SGMII3: +#endif + if (baud_rate == SERDES_SPEED_1_25_GBPS) + seq_id = SGMII_1_25_SPEED_CONFIG_SEQ; + else if (baud_rate == SERDES_SPEED_3_125_GBPS) + seq_id = SGMII_3_125_SPEED_CONFIG_SEQ; + break; + case QSGMII: + seq_id = QSGMII_5_SPEED_CONFIG_SEQ; + break; +#ifdef CONFIG_ARMADA_39X + case XAUI: + seq_id = XAUI_3_125_SPEED_CONFIG_SEQ; + break; + case RXAUI: + seq_id = RXAUI_6_25_SPEED_CONFIG_SEQ; + break; +#endif + default: + return SERDES_LAST_SEQ; + } + + return seq_id; +} + +/* + * This is the weak default function for the Marvell evaluation or + * development boarrds. Like the DB-88F6820-GP and others. + * Custom boards should define this function in their board + * code (board directory). And overwrite this default function + * with this custom specific code. + */ +__weak int hws_board_topology_load(struct serdes_map *serdes_map_array) +{ + u32 board_id = mv_board_id_get(); + u32 board_id_index = mv_board_id_index_get(board_id); + + DEBUG_INIT_FULL_S("\n### hws_board_topology_load ###\n"); + /* getting board topology according to the board id */ + DEBUG_INIT_FULL_S("Getting board topology according to the board id\n"); + + CHECK_STATUS(load_topology_func_arr[board_id_index] (serdes_map_array)); + + return MV_OK; +} + +void print_topology_details(struct serdes_map *serdes_map_array) +{ + u32 lane_num; + + DEBUG_INIT_S("board SerDes lanes topology details:\n"); + + DEBUG_INIT_S(" | Lane # | Speed | Type |\n"); + DEBUG_INIT_S(" --------------------------------\n"); + for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) { + if (serdes_map_array[lane_num].serdes_type == DEFAULT_SERDES) + continue; + DEBUG_INIT_S(" | "); + DEBUG_INIT_D(hws_get_physical_serdes_num(lane_num), 1); + DEBUG_INIT_S(" | "); + DEBUG_INIT_D(serdes_map_array[lane_num].serdes_speed, 2); + DEBUG_INIT_S(" | "); + DEBUG_INIT_S((char *) + serdes_type_to_string[serdes_map_array[lane_num]. + serdes_type]); + DEBUG_INIT_S("\t|\n"); + } + DEBUG_INIT_S(" --------------------------------\n"); +} + +int hws_pre_serdes_init_config(void) +{ + u32 data; + + /* + * Configure Core PLL + */ + /* + * set PLL parameters + * bits[2:0] =0x3 (Core-PLL Kdiv) + * bits[20:12]=0x9f (Core-PLL Ndiv) + * bits[24:21]=0x7(Core-PLL VCO Band) + * bits[28:25]=0x1(Core-PLL Rlf) + * bits[31:29]=0x2(Core-PLL charge-pump adjust) + */ + reg_write(CORE_PLL_PARAMETERS_REG, 0x42e9f003); + + /* Enable PLL Configuration */ + data = reg_read(CORE_PLL_CONFIG_REG); + data = SET_BIT(data, 9); + reg_write(CORE_PLL_CONFIG_REG, data); + + return MV_OK; +} + +int serdes_phy_config(void) +{ + DEBUG_INIT_FULL_S("\n### ctrl_high_speed_serdes_phy_config ###\n"); + + DEBUG_INIT_S("High speed PHY - Version: "); + DEBUG_INIT_S(SERDES_VERION); + DEBUG_INIT_S("\n"); + + /* Init serdes sequences DB */ + if (hws_serdes_seq_init() != MV_OK) { + printf("hws_ctrl_high_speed_serdes_phy_config: Error: Serdes initialization fail\n"); + return MV_FAIL; + } + + /* I2C init */ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + + /* Board topology load */ + DEBUG_INIT_FULL_S + ("ctrl_high_speed_serdes_phy_config: Loading board topology..\n"); + CHECK_STATUS(hws_board_topology_load(serdes_configuration_map)); + + /* print topology */ + print_topology_details(serdes_configuration_map); + CHECK_STATUS(hws_pre_serdes_init_config()); + + /* Power-Up sequence */ + DEBUG_INIT_FULL_S + ("ctrl_high_speed_serdes_phy_config: Starting serdes power up sequence\n"); + + CHECK_STATUS(hws_power_up_serdes_lanes(serdes_configuration_map)); + + DEBUG_INIT_FULL_S + ("\n### ctrl_high_speed_serdes_phy_config ended successfully ###\n"); + + DEBUG_INIT_S(ENDED_OK); + + return MV_OK; +} + +int serdes_polarity_config(u32 serdes_num, int is_rx) +{ + u32 data; + u32 reg_addr; + u8 bit_off = (is_rx) ? 11 : 10; + + reg_addr = SERDES_REGS_LANE_BASE_OFFSET(serdes_num) + SYNC_PATTERN_REG; + data = reg_read(reg_addr); + data = SET_BIT(data, bit_off); + reg_write(reg_addr, data); + + return MV_OK; +} + +int hws_power_up_serdes_lanes(struct serdes_map *serdes_config_map) +{ + u32 serdes_id, serdes_lane_num; + enum ref_clock ref_clock; + enum serdes_type serdes_type; + enum serdes_speed serdes_speed; + enum serdes_mode serdes_mode; + int serdes_rx_polarity_swap; + int serdes_tx_polarity_swap; + int is_pex_enabled = 0; + + /* + * is_pex_enabled: + * Flag which indicates that one of the Serdes is of PEX. + * In this case, PEX unit will be initialized after Serdes power-up + */ + + DEBUG_INIT_FULL_S("\n### hws_power_up_serdes_lanes ###\n"); + + /* COMMON PHYS SELECTORS register configuration */ + DEBUG_INIT_FULL_S + ("hws_power_up_serdes_lanes: Updating COMMON PHYS SELECTORS reg\n"); + CHECK_STATUS(hws_update_serdes_phy_selectors(serdes_configuration_map)); + + /* per Serdes Power Up */ + for (serdes_id = 0; serdes_id < hws_serdes_get_max_lane(); + serdes_id++) { + DEBUG_INIT_FULL_S + ("calling serdes_power_up_ctrl: serdes lane number "); + DEBUG_INIT_FULL_D_10(serdes_lane_num, 1); + DEBUG_INIT_FULL_S("\n"); + + serdes_lane_num = hws_get_physical_serdes_num(serdes_id); + serdes_type = serdes_config_map[serdes_id].serdes_type; + serdes_speed = serdes_config_map[serdes_id].serdes_speed; + serdes_mode = serdes_config_map[serdes_id].serdes_mode; + serdes_rx_polarity_swap = serdes_config_map[serdes_id].swap_rx; + serdes_tx_polarity_swap = serdes_config_map[serdes_id].swap_tx; + + /* serdes lane is not in use */ + if (serdes_type == DEFAULT_SERDES) + continue; + else if (serdes_type <= PEX3) /* PEX type */ + is_pex_enabled = 1; + + ref_clock = hws_serdes_get_ref_clock_val(serdes_type); + if (ref_clock == REF_CLOCK_UNSUPPORTED) { + DEBUG_INIT_S + ("hws_power_up_serdes_lanes: unsupported ref clock\n"); + return MV_NOT_SUPPORTED; + } + CHECK_STATUS(serdes_power_up_ctrl(serdes_lane_num, + 1, + serdes_type, + serdes_speed, + serdes_mode, ref_clock)); + + /* RX Polarity config */ + if (serdes_rx_polarity_swap) + CHECK_STATUS(serdes_polarity_config + (serdes_lane_num, 1)); + + /* TX Polarity config */ + if (serdes_tx_polarity_swap) + CHECK_STATUS(serdes_polarity_config + (serdes_lane_num, 0)); + } + + if (is_pex_enabled) { + /* Set PEX_TX_CONFIG_SEQ sequence for PEXx4 mode. + After finish the Power_up sequence for all lanes, + the lanes should be released from reset state. */ + CHECK_STATUS(hws_pex_tx_config_seq(serdes_config_map)); + + /* PEX configuration */ + CHECK_STATUS(hws_pex_config(serdes_config_map)); + } + + /* USB2 configuration */ + DEBUG_INIT_FULL_S("hws_power_up_serdes_lanes: init USB2 Phys\n"); + CHECK_STATUS(mv_seq_exec(0 /* not relevant */ , USB2_POWER_UP_SEQ)); + + DEBUG_INIT_FULL_S + ("### hws_power_up_serdes_lanes ended successfully ###\n"); + + return MV_OK; +} + +int ctrl_high_speed_serdes_phy_config(void) +{ + return hws_ctrl_high_speed_serdes_phy_config(); +} + +static int serdes_pex_usb3_pipe_delay_w_a(u32 serdes_num, u8 serdes_type) +{ + u32 reg_data; + + /* WA for A380 Z1 relevant for lanes 3,4,5 only */ + if (serdes_num >= 3) { + reg_data = reg_read(GENERAL_PURPOSE_RESERVED0_REG); + /* set delay on pipe - + * When lane 3 is connected to a MAC of Pex -> set bit 7 to 1. + * When lane 3 is connected to a MAC of USB3 -> set bit 7 to 0. + * When lane 4 is connected to a MAC of Pex -> set bit 8 to 1. + * When lane 4 is connected to a MAC of USB3 -> set bit 8 to 0. + * When lane 5 is connected to a MAC of Pex -> set bit 8 to 1. + * When lane 5 is connected to a MAC of USB3 -> set bit 8 to 0. + */ + if (serdes_type == PEX) + reg_data |= 1 << (7 + (serdes_num - 3)); + if (serdes_type == USB3) { + /* USB3 */ + reg_data &= ~(1 << (7 + (serdes_num - 3))); + } + reg_write(GENERAL_PURPOSE_RESERVED0_REG, reg_data); + } + + return MV_OK; +} + +/* + * hws_serdes_pex_ref_clock_satr_get - + * + * DESCRIPTION: Get the reference clock value from DEVICE_SAMPLE_AT_RESET1_REG + * and check: + * bit[2] for PEX#0, bit[3] for PEX#1, bit[30] for PEX#2, bit[31] + * for PEX#3. + * If bit=0 --> REF_CLOCK_100MHz + * If bit=1 && DEVICE_SAMPLE_AT_RESET2_REG bit[0]=0 + * --> REF_CLOCK_25MHz + * If bit=1 && DEVICE_SAMPLE_AT_RESET2_REG bit[0]=1 + * --> REF_CLOCK_40MHz + * + * INPUT: serdes_type - Type of Serdes + * + * OUTPUT: pex_satr - Return the REF_CLOCK value: + * REF_CLOCK_25MHz, REF_CLOCK_40MHz or REF_CLOCK_100MHz + * + * RETURNS: MV_OK - for success + * MV_BAD_PARAM - for fail + */ +int hws_serdes_pex_ref_clock_satr_get(enum serdes_type serdes_type, u32 *pex_satr) +{ + u32 data, reg_satr1; + + reg_satr1 = reg_read(DEVICE_SAMPLE_AT_RESET1_REG); + + switch (serdes_type) { + case PEX0: + data = REF_CLK_SELECTOR_VAL_PEX0(reg_satr1); + break; + case PEX1: + data = REF_CLK_SELECTOR_VAL_PEX1(reg_satr1); + break; + case PEX2: + data = REF_CLK_SELECTOR_VAL_PEX2(reg_satr1); + break; + case PEX3: + data = REF_CLK_SELECTOR_VAL_PEX3(reg_satr1); + break; + default: + printf("%s: Error: SerDes type %d is not supported\n", + __func__, serdes_type); + return MV_BAD_PARAM; + } + + *pex_satr = data; + + return MV_OK; +} + +u32 hws_serdes_get_ref_clock_val(enum serdes_type serdes_type) +{ + u32 pex_satr; + enum ref_clock ref_clock; + + DEBUG_INIT_FULL_S("\n### hws_serdes_get_ref_clock_val ###\n"); + + if (serdes_type >= LAST_SERDES_TYPE) + return REF_CLOCK_UNSUPPORTED; + + /* read ref clock from S@R */ + ref_clock = hws_serdes_silicon_ref_clock_get(); + + if (serdes_type > PEX3) { + /* for all Serdes types but PCIe */ + return ref_clock; + } + + /* for PCIe, need also to check PCIe S@R */ + CHECK_STATUS(hws_serdes_pex_ref_clock_satr_get + (serdes_type, &pex_satr)); + + if (pex_satr == 0) { + return REF_CLOCK_100MHZ; + } else if (pex_satr == 1) { + /* value of 1 means we can use ref clock from SoC (as other Serdes types) */ + return ref_clock; + } else { + printf + ("%s: Error: REF_CLK_SELECTOR_VAL for SerDes type %d is wrong\n", + __func__, serdes_type); + return REF_CLOCK_UNSUPPORTED; + } +} + +int serdes_power_up_ctrl(u32 serdes_num, int serdes_power_up, + enum serdes_type serdes_type, + enum serdes_speed baud_rate, + enum serdes_mode serdes_mode, enum ref_clock ref_clock) +{ + u32 sata_idx, pex_idx, sata_port; + enum serdes_seq speed_seq_id; + u32 reg_data; + int is_pex_by1; + + DEBUG_INIT_FULL_S("\n### serdes_power_up_ctrl ###\n"); + + if (serdes_power_up == 1) { /* Serdes power up */ + DEBUG_INIT_FULL_S + ("serdes_power_up_ctrl: executing power up.. "); + DEBUG_INIT_FULL_C("serdes num = ", serdes_num, 2); + DEBUG_INIT_FULL_C("serdes type = ", serdes_type, 2); + + DEBUG_INIT_FULL_S("Going access 1"); + + /* Getting the Speed Select sequence id */ + speed_seq_id = + serdes_type_and_speed_to_speed_seq(serdes_type, + baud_rate); + if (speed_seq_id == SERDES_LAST_SEQ) { + printf + ("serdes_power_up_ctrl: serdes type %d and speed %d are not supported together\n", + serdes_type, baud_rate); + + return MV_BAD_PARAM; + } + + /* Executing power up, ref clock set, speed config and TX config */ + switch (serdes_type) { + case PEX0: + case PEX1: + case PEX2: + case PEX3: + if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2) { + CHECK_STATUS(serdes_pex_usb3_pipe_delay_w_a + (serdes_num, PEX)); + } + + is_pex_by1 = (serdes_mode == PEX_ROOT_COMPLEX_X1) || + (serdes_mode == PEX_END_POINT_X1); + pex_idx = serdes_type - PEX0; + + if ((is_pex_by1 == 1) || (serdes_type == PEX0)) { + /* For PEX by 4, init only the PEX 0 */ + reg_data = reg_read(SOC_CONTROL_REG1); + if (is_pex_by1 == 1) + reg_data |= 0x4000; + else + reg_data &= ~0x4000; + reg_write(SOC_CONTROL_REG1, reg_data); + + reg_data = + reg_read(((PEX_IF_REGS_BASE(pex_idx)) + + 0x6c)); + reg_data &= ~0x3f0; + if (is_pex_by1 == 1) + reg_data |= 0x10; + else + reg_data |= 0x40; + reg_write(((PEX_IF_REGS_BASE(pex_idx)) + 0x6c), + reg_data); + + reg_data = + reg_read(((PEX_IF_REGS_BASE(pex_idx)) + + 0x6c)); + reg_data &= ~0xf; + reg_data |= 0x2; + reg_write(((PEX_IF_REGS_BASE(pex_idx)) + 0x6c), + reg_data); + + reg_data = + reg_read(((PEX_IF_REGS_BASE(pex_idx)) + + 0x70)); + reg_data &= ~0x40; + reg_data |= 0x40; + reg_write(((PEX_IF_REGS_BASE(pex_idx)) + 0x70), + reg_data); + } + + CHECK_STATUS(mv_seq_exec(serdes_num, PEX_POWER_UP_SEQ)); + if (is_pex_by1 == 0) { + /* + * for PEX by 4 - use the PEX index as the + * seq array index + */ + serdes_seq_db[PEX_BY_4_CONFIG_SEQ]. + data_arr_idx = pex_idx; + CHECK_STATUS(mv_seq_exec + (serdes_num, PEX_BY_4_CONFIG_SEQ)); + } + + CHECK_STATUS(hws_ref_clock_set + (serdes_num, serdes_type, ref_clock)); + CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id)); + CHECK_STATUS(mv_seq_exec + (serdes_num, PEX_ELECTRICAL_CONFIG_SEQ)); + + if (is_pex_by1 == 1) { + CHECK_STATUS(mv_seq_exec + (serdes_num, PEX_TX_CONFIG_SEQ2)); + CHECK_STATUS(mv_seq_exec + (serdes_num, PEX_TX_CONFIG_SEQ3)); + CHECK_STATUS(mv_seq_exec + (serdes_num, PEX_TX_CONFIG_SEQ1)); + } + udelay(20); + + break; + case USB3_HOST0: + case USB3_HOST1: + case USB3_DEVICE: + if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2) { + CHECK_STATUS(serdes_pex_usb3_pipe_delay_w_a + (serdes_num, USB3)); + } + CHECK_STATUS(mv_seq_exec + (serdes_num, USB3_POWER_UP_SEQ)); + CHECK_STATUS(hws_ref_clock_set + (serdes_num, serdes_type, ref_clock)); + CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id)); + if (serdes_type == USB3_DEVICE) { + CHECK_STATUS(mv_seq_exec + (serdes_num, + USB3_DEVICE_CONFIG_SEQ)); + } + CHECK_STATUS(mv_seq_exec + (serdes_num, USB3_ELECTRICAL_CONFIG_SEQ)); + CHECK_STATUS(mv_seq_exec + (serdes_num, USB3_TX_CONFIG_SEQ1)); + CHECK_STATUS(mv_seq_exec + (serdes_num, USB3_TX_CONFIG_SEQ2)); + CHECK_STATUS(mv_seq_exec + (serdes_num, USB3_TX_CONFIG_SEQ3)); + + udelay(10000); + break; + case SATA0: + case SATA1: + case SATA2: + case SATA3: + sata_idx = ((serdes_type == SATA0) || + (serdes_type == SATA1)) ? 0 : 1; + sata_port = ((serdes_type == SATA0) || + (serdes_type == SATA2)) ? 0 : 1; + + CHECK_STATUS(mv_seq_exec + (sata_idx, (sata_port == 0) ? + SATA_PORT_0_ONLY_POWER_UP_SEQ : + SATA_PORT_1_ONLY_POWER_UP_SEQ)); + CHECK_STATUS(mv_seq_exec + (serdes_num, SATA_POWER_UP_SEQ)); + CHECK_STATUS(hws_ref_clock_set + (serdes_num, serdes_type, ref_clock)); + CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id)); + CHECK_STATUS(mv_seq_exec + (serdes_num, SATA_ELECTRICAL_CONFIG_SEQ)); + CHECK_STATUS(mv_seq_exec + (serdes_num, SATA_TX_CONFIG_SEQ1)); + CHECK_STATUS(mv_seq_exec + (sata_idx, (sata_port == 0) ? + SATA_PORT_0_ONLY_TX_CONFIG_SEQ : + SATA_PORT_1_ONLY_TX_CONFIG_SEQ)); + CHECK_STATUS(mv_seq_exec + (serdes_num, SATA_TX_CONFIG_SEQ2)); + + udelay(10000); + break; + case SGMII0: + case SGMII1: + case SGMII2: + CHECK_STATUS(mv_seq_exec + (serdes_num, SGMII_POWER_UP_SEQ)); + CHECK_STATUS(hws_ref_clock_set + (serdes_num, serdes_type, ref_clock)); + CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id)); + CHECK_STATUS(mv_seq_exec + (serdes_num, SGMII_ELECTRICAL_CONFIG_SEQ)); + CHECK_STATUS(mv_seq_exec + (serdes_num, SGMII_TX_CONFIG_SEQ1)); + CHECK_STATUS(mv_seq_exec + (serdes_num, SGMII_TX_CONFIG_SEQ2)); + + /* GBE configuration */ + reg_data = reg_read(GBE_CONFIGURATION_REG); + /* write the SGMII index */ + reg_data |= 0x1 << (serdes_type - SGMII0); + reg_write(GBE_CONFIGURATION_REG, reg_data); + + break; + case QSGMII: + if (hws_ctrl_serdes_rev_get() < MV_SERDES_REV_2_1) + return MV_NOT_SUPPORTED; + + CHECK_STATUS(mv_seq_exec + (serdes_num, QSGMII_POWER_UP_SEQ)); + CHECK_STATUS(hws_ref_clock_set + (serdes_num, serdes_type, ref_clock)); + CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id)); + CHECK_STATUS(mv_seq_exec + (serdes_num, + QSGMII_ELECTRICAL_CONFIG_SEQ)); + CHECK_STATUS(mv_seq_exec + (serdes_num, QSGMII_TX_CONFIG_SEQ1)); + CHECK_STATUS(mv_seq_exec + (serdes_num, QSGMII_TX_CONFIG_SEQ2)); + break; + case SGMII3: + case XAUI: + case RXAUI: + CHECK_STATUS(serdes_power_up_ctrl_ext + (serdes_num, serdes_power_up, serdes_type, + baud_rate, serdes_mode, ref_clock)); + break; + default: + DEBUG_INIT_S + ("serdes_power_up_ctrl: bad serdes_type parameter\n"); + return MV_BAD_PARAM; + } + } else { /* Serdes power down */ + DEBUG_INIT_FULL_S("serdes_power_up: executing power down.. "); + DEBUG_INIT_FULL_C("serdes num = ", serdes_num, 1); + + CHECK_STATUS(mv_seq_exec(serdes_num, SERDES_POWER_DOWN_SEQ)); + } + + DEBUG_INIT_FULL_C( + "serdes_power_up_ctrl ended successfully for serdes ", + serdes_num, 2); + + return MV_OK; +} + +int hws_update_serdes_phy_selectors(struct serdes_map *serdes_config_map) +{ + u32 lane_data, idx, serdes_lane_hw_num, reg_data = 0; + enum serdes_type serdes_type; + enum serdes_mode serdes_mode; + u8 select_bit_off; + int is_pex_x4 = 0; + int updated_topology_print = 0; + + DEBUG_INIT_FULL_S("\n### hws_update_serdes_phy_selectors ###\n"); + DEBUG_INIT_FULL_S + ("Updating the COMMON PHYS SELECTORS register with the serdes types\n"); + + if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2) + select_bit_off = 3; + else + select_bit_off = 4; + + /* + * Updating bits 0-17 in the COMMON PHYS SELECTORS register + * according to the serdes types + */ + for (idx = 0; idx < hws_serdes_get_max_lane(); + idx++) { + serdes_type = serdes_config_map[idx].serdes_type; + serdes_mode = serdes_config_map[idx].serdes_mode; + serdes_lane_hw_num = hws_get_physical_serdes_num(idx); + + lane_data = + hws_serdes_get_phy_selector_val(serdes_lane_hw_num, + serdes_type); + + if (serdes_type == DEFAULT_SERDES) + continue; + + if (hws_serdes_topology_verify + (serdes_type, idx, serdes_mode) != MV_OK) { + serdes_config_map[idx].serdes_type = + DEFAULT_SERDES; + printf("%s: SerDes lane #%d is disabled\n", __func__, + serdes_lane_hw_num); + updated_topology_print = 1; + continue; + } + + /* + * Checking if the board topology configuration includes + * PEXx4 - for the next step + */ + if ((serdes_mode == PEX_END_POINT_X4) || + (serdes_mode == PEX_ROOT_COMPLEX_X4)) { + /* update lane data to the 3 next SERDES lanes */ + lane_data = + common_phys_selectors_pex_by4_lanes + [serdes_lane_hw_num]; + if (serdes_type == PEX0) + is_pex_x4 = 1; + } + + if (lane_data == NA) { + printf + ("%s: Warning: SerDes lane #%d and type %d are not supported together\n", + __func__, serdes_lane_hw_num, serdes_mode); + serdes_config_map[idx].serdes_type = + DEFAULT_SERDES; + printf("%s: SerDes lane #%d is disabled\n", __func__, + serdes_lane_hw_num); + continue; + } + + /* + * Updating the data that will be written to + * COMMON_PHYS_SELECTORS_REG + */ + reg_data |= (lane_data << + (select_bit_off * serdes_lane_hw_num)); + } + + /* + * Check that number of used lanes for XAUI and RXAUI + * (if used) is right + */ + hws_serdes_xaui_topology_verify(); + + /* Print topology */ + if (updated_topology_print) + print_topology_details(serdes_config_map); + + /* + * Updating the PEXx4 Enable bit in the COMMON PHYS SELECTORS + * register for PEXx4 mode + */ + reg_data |= (is_pex_x4 == 1) ? (0x1 << PEX_X4_ENABLE_OFFS) : 0; + + /* Updating the COMMON PHYS SELECTORS register */ + reg_write(COMMON_PHYS_SELECTORS_REG, reg_data); + + return MV_OK; +} + +int hws_ref_clock_set(u32 serdes_num, enum serdes_type serdes_type, + enum ref_clock ref_clock) +{ + u32 data1 = 0, data2 = 0, data3 = 0, reg_data; + + DEBUG_INIT_FULL_S("\n### hws_ref_clock_set ###\n"); + + if (hws_is_serdes_active(serdes_num) != 1) { + printf("%s: SerDes lane #%d is not Active\n", __func__, + serdes_num); + return MV_BAD_PARAM; + } + + switch (serdes_type) { + case PEX0: + case PEX1: + case PEX2: + case PEX3: + switch (ref_clock) { + case REF_CLOCK_25MHZ: + CHECK_STATUS(mv_seq_exec + (serdes_num, + PEX_CONFIG_REF_CLOCK_25MHZ_SEQ)); + return MV_OK; + case REF_CLOCK_100MHZ: + CHECK_STATUS(mv_seq_exec + (serdes_num, + PEX_CONFIG_REF_CLOCK_100MHZ_SEQ)); + return MV_OK; +#ifdef CONFIG_ARMADA_39X + case REF_CLOCK_40MHZ: + CHECK_STATUS(mv_seq_exec + (serdes_num, + PEX_CONFIG_REF_CLOCK_40MHZ_SEQ)); + return MV_OK; +#endif + default: + printf + ("%s: Error: ref_clock %d for SerDes lane #%d, type %d is not supported\n", + __func__, ref_clock, serdes_num, serdes_type); + return MV_BAD_PARAM; + } + case USB3_HOST0: + case USB3_HOST1: + case USB3_DEVICE: + if (ref_clock == REF_CLOCK_25MHZ) { + data1 = POWER_AND_PLL_CTRL_REG_25MHZ_VAL_2; + data2 = GLOBAL_PM_CTRL_REG_25MHZ_VAL; + data3 = LANE_CFG4_REG_25MHZ_VAL; + } else if (ref_clock == REF_CLOCK_40MHZ) { + data1 = POWER_AND_PLL_CTRL_REG_40MHZ_VAL; + data2 = GLOBAL_PM_CTRL_REG_40MHZ_VAL; + data3 = LANE_CFG4_REG_40MHZ_VAL; + } else { + printf + ("hws_ref_clock_set: ref clock is not valid for serdes type %d\n", + serdes_type); + return MV_BAD_PARAM; + } + break; + case SATA0: + case SATA1: + case SATA2: + case SATA3: + case SGMII0: + case SGMII1: + case SGMII2: + case QSGMII: + if (ref_clock == REF_CLOCK_25MHZ) { + data1 = POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1; + } else if (ref_clock == REF_CLOCK_40MHZ) { + data1 = POWER_AND_PLL_CTRL_REG_40MHZ_VAL; + } else { + printf + ("hws_ref_clock_set: ref clock is not valid for serdes type %d\n", + serdes_type); + return MV_BAD_PARAM; + } + break; +#ifdef CONFIG_ARMADA_39X + case SGMII3: + case XAUI: + case RXAUI: + if (ref_clock == REF_CLOCK_25MHZ) { + data1 = POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1; + } else if (ref_clock == REF_CLOCK_40MHZ) { + data1 = POWER_AND_PLL_CTRL_REG_40MHZ_VAL; + } else { + printf + ("hws_ref_clock_set: ref clock is not valid for serdes type %d\n", + serdes_type); + return MV_BAD_PARAM; + } + break; +#endif + default: + DEBUG_INIT_S("hws_ref_clock_set: not supported serdes type\n"); + return MV_BAD_PARAM; + } + + /* + * Write the ref_clock to relevant SELECT_REF_CLOCK_REG bits and + * offset + */ + reg_data = reg_read(POWER_AND_PLL_CTRL_REG + + SERDES_REGS_LANE_BASE_OFFSET(serdes_num)); + reg_data &= POWER_AND_PLL_CTRL_REG_MASK; + reg_data |= data1; + reg_write(POWER_AND_PLL_CTRL_REG + + SERDES_REGS_LANE_BASE_OFFSET(serdes_num), reg_data); + + if ((serdes_type == USB3_HOST0) || (serdes_type == USB3_HOST1) || + (serdes_type == USB3_DEVICE)) { + reg_data = reg_read(GLOBAL_PM_CTRL + + SERDES_REGS_LANE_BASE_OFFSET(serdes_num)); + reg_data &= GLOBAL_PM_CTRL_REG_MASK; + reg_data |= data2; + reg_write(GLOBAL_PM_CTRL + + SERDES_REGS_LANE_BASE_OFFSET(serdes_num), reg_data); + + reg_data = reg_read(LANE_CFG4_REG + + SERDES_REGS_LANE_BASE_OFFSET(serdes_num)); + reg_data &= LANE_CFG4_REG_MASK; + reg_data |= data3; + reg_write(LANE_CFG4_REG + + SERDES_REGS_LANE_BASE_OFFSET(serdes_num), reg_data); + } + + return MV_OK; +} + +/* + * hws_pex_tx_config_seq - + * + * DESCRIPTION: Set PEX_TX_CONFIG_SEQ sequence init for PEXx4 mode + * INPUT: serdes_map - The board topology map + * OUTPUT: None + * RETURNS: MV_OK - for success + * MV_BAD_PARAM - for fail + */ +int hws_pex_tx_config_seq(struct serdes_map *serdes_map) +{ + enum serdes_mode serdes_mode; + u32 serdes_lane_id, serdes_lane_hw_num; + + DEBUG_INIT_FULL_S("\n### hws_pex_tx_config_seq ###\n"); + + /* + * For PEXx4: the pex_and_usb3_tx_config_params1/2/3 + * configurations should run by setting each sequence for + * all 4 lanes. + */ + + /* relese pipe soft reset for all lanes */ + for (serdes_lane_id = 0; serdes_lane_id < hws_serdes_get_max_lane(); + serdes_lane_id++) { + serdes_mode = serdes_map[serdes_lane_id].serdes_mode; + serdes_lane_hw_num = + hws_get_physical_serdes_num(serdes_lane_id); + + if ((serdes_mode == PEX_ROOT_COMPLEX_X4) || + (serdes_mode == PEX_END_POINT_X4)) { + CHECK_STATUS(mv_seq_exec + (serdes_lane_hw_num, PEX_TX_CONFIG_SEQ1)); + } + } + + /* set phy soft reset for all lanes */ + for (serdes_lane_id = 0; serdes_lane_id < hws_serdes_get_max_lane(); + serdes_lane_id++) { + serdes_mode = serdes_map[serdes_lane_id].serdes_mode; + serdes_lane_hw_num = + hws_get_physical_serdes_num(serdes_lane_id); + if ((serdes_mode == PEX_ROOT_COMPLEX_X4) || + (serdes_mode == PEX_END_POINT_X4)) { + CHECK_STATUS(mv_seq_exec + (serdes_lane_hw_num, PEX_TX_CONFIG_SEQ2)); + } + } + + /* set phy soft reset for all lanes */ + for (serdes_lane_id = 0; serdes_lane_id < hws_serdes_get_max_lane(); + serdes_lane_id++) { + serdes_mode = serdes_map[serdes_lane_id].serdes_mode; + serdes_lane_hw_num = + hws_get_physical_serdes_num(serdes_lane_id); + if ((serdes_mode == PEX_ROOT_COMPLEX_X4) || + (serdes_mode == PEX_END_POINT_X4)) { + CHECK_STATUS(mv_seq_exec + (serdes_lane_hw_num, PEX_TX_CONFIG_SEQ3)); + } + } + + return MV_OK; +} diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h new file mode 100644 index 0000000..2508721 --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h @@ -0,0 +1,251 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _HIGH_SPEED_ENV_SPEC_H +#define _HIGH_SPEED_ENV_SPEC_H + +#include "seq_exec.h" + +/* + * For setting or clearing a certain bit (bit is a number between 0 and 31) + * in the data + */ +#define SET_BIT(data, bit) ((data) | (0x1 << (bit))) +#define CLEAR_BIT(data, bit) ((data) & (~(0x1 << (bit)))) + +#define MAX_SERDES_LANES 7 /* as in a39x */ + +/* Serdes revision */ +/* Serdes revision 1.2 (for A38x-Z1) */ +#define MV_SERDES_REV_1_2 0x0 +/* Serdes revision 2.1 (for A39x-Z1, A38x-A0) */ +#define MV_SERDES_REV_2_1 0x1 +#define MV_SERDES_REV_NA 0xff + +#define SERDES_REGS_LANE_BASE_OFFSET(lane) (0x800 * (lane)) + +#define PEX_X4_ENABLE_OFFS \ + (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2 ? 18 : 31) + +/* Serdes lane types */ +enum serdes_type { + PEX0, + PEX1, + PEX2, + PEX3, + SATA0, + SATA1, + SATA2, + SATA3, + SGMII0, + SGMII1, + SGMII2, + QSGMII, + USB3_HOST0, + USB3_HOST1, + USB3_DEVICE, + SGMII3, + XAUI, + RXAUI, + DEFAULT_SERDES, + LAST_SERDES_TYPE +}; + +/* Serdes baud rates */ +enum serdes_speed { + SERDES_SPEED_1_25_GBPS, + SERDES_SPEED_1_5_GBPS, + SERDES_SPEED_2_5_GBPS, + SERDES_SPEED_3_GBPS, + SERDES_SPEED_3_125_GBPS, + SERDES_SPEED_5_GBPS, + SERDES_SPEED_6_GBPS, + SERDES_SPEED_6_25_GBPS, + LAST_SERDES_SPEED +}; + +/* Serdes modes */ +enum serdes_mode { + PEX_ROOT_COMPLEX_X1, + PEX_ROOT_COMPLEX_X4, + PEX_END_POINT_X1, + PEX_END_POINT_X4, + + SERDES_DEFAULT_MODE, /* not pex */ + + SERDES_LAST_MODE +}; + +struct serdes_map { + enum serdes_type serdes_type; + enum serdes_speed serdes_speed; + enum serdes_mode serdes_mode; + int swap_rx; + int swap_tx; +}; + +/* Serdes ref clock options */ +enum ref_clock { + REF_CLOCK_25MHZ, + REF_CLOCK_100MHZ, + REF_CLOCK_40MHZ, + REF_CLOCK_UNSUPPORTED +}; + +/* Serdes sequences */ +enum serdes_seq { + SATA_PORT_0_ONLY_POWER_UP_SEQ, + SATA_PORT_1_ONLY_POWER_UP_SEQ, + SATA_POWER_UP_SEQ, + SATA_1_5_SPEED_CONFIG_SEQ, + SATA_3_SPEED_CONFIG_SEQ, + SATA_6_SPEED_CONFIG_SEQ, + SATA_ELECTRICAL_CONFIG_SEQ, + SATA_TX_CONFIG_SEQ1, + SATA_PORT_0_ONLY_TX_CONFIG_SEQ, + SATA_PORT_1_ONLY_TX_CONFIG_SEQ, + SATA_TX_CONFIG_SEQ2, + + SGMII_POWER_UP_SEQ, + SGMII_1_25_SPEED_CONFIG_SEQ, + SGMII_3_125_SPEED_CONFIG_SEQ, + SGMII_ELECTRICAL_CONFIG_SEQ, + SGMII_TX_CONFIG_SEQ1, + SGMII_TX_CONFIG_SEQ2, + + PEX_POWER_UP_SEQ, + PEX_2_5_SPEED_CONFIG_SEQ, + PEX_5_SPEED_CONFIG_SEQ, + PEX_ELECTRICAL_CONFIG_SEQ, + PEX_TX_CONFIG_SEQ1, + PEX_TX_CONFIG_SEQ2, + PEX_TX_CONFIG_SEQ3, + PEX_BY_4_CONFIG_SEQ, + PEX_CONFIG_REF_CLOCK_25MHZ_SEQ, + PEX_CONFIG_REF_CLOCK_100MHZ_SEQ, + PEX_CONFIG_REF_CLOCK_40MHZ_SEQ, + + USB3_POWER_UP_SEQ, + USB3_HOST_SPEED_CONFIG_SEQ, + USB3_DEVICE_SPEED_CONFIG_SEQ, + USB3_ELECTRICAL_CONFIG_SEQ, + USB3_TX_CONFIG_SEQ1, + USB3_TX_CONFIG_SEQ2, + USB3_TX_CONFIG_SEQ3, + USB3_DEVICE_CONFIG_SEQ, + + USB2_POWER_UP_SEQ, + + SERDES_POWER_DOWN_SEQ, + + SGMII3_POWER_UP_SEQ, + SGMII3_1_25_SPEED_CONFIG_SEQ, + SGMII3_TX_CONFIG_SEQ1, + SGMII3_TX_CONFIG_SEQ2, + + QSGMII_POWER_UP_SEQ, + QSGMII_5_SPEED_CONFIG_SEQ, + QSGMII_ELECTRICAL_CONFIG_SEQ, + QSGMII_TX_CONFIG_SEQ1, + QSGMII_TX_CONFIG_SEQ2, + + XAUI_POWER_UP_SEQ, + XAUI_3_125_SPEED_CONFIG_SEQ, + XAUI_ELECTRICAL_CONFIG_SEQ, + XAUI_TX_CONFIG_SEQ1, + XAUI_TX_CONFIG_SEQ2, + + RXAUI_POWER_UP_SEQ, + RXAUI_6_25_SPEED_CONFIG_SEQ, + RXAUI_ELECTRICAL_CONFIG_SEQ, + RXAUI_TX_CONFIG_SEQ1, + RXAUI_TX_CONFIG_SEQ2, + + SERDES_LAST_SEQ +}; + +/* The different sequence types for PEX and USB3 */ +enum { + PEX, + USB3, + LAST_PEX_USB_SEQ_TYPE +}; + +enum { + PEXSERDES_SPEED_2_5_GBPS, + PEXSERDES_SPEED_5_GBPS, + USB3SERDES_SPEED_5_GBPS_HOST, + USB3SERDES_SPEED_5_GBPS_DEVICE, + LAST_PEX_USB_SPEED_SEQ_TYPE +}; + +/* The different sequence types for SATA and SGMII */ +enum { + SATA, + SGMII, + SGMII_3_125, + LAST_SATA_SGMII_SEQ_TYPE +}; + +enum { + QSGMII_SEQ_IDX, + LAST_QSGMII_SEQ_TYPE +}; + +enum { + XAUI_SEQ_IDX, + RXAUI_SEQ_IDX, + LAST_XAUI_RXAUI_SEQ_TYPE +}; + +enum { + SATASERDES_SPEED_1_5_GBPS, + SATASERDES_SPEED_3_GBPS, + SATASERDES_SPEED_6_GBPS, + SGMIISERDES_SPEED_1_25_GBPS, + SGMIISERDES_SPEED_3_125_GBPS, + LAST_SATA_SGMII_SPEED_SEQ_TYPE +}; + +extern u8 selectors_serdes_rev1_map[LAST_SERDES_TYPE][MAX_SERDES_LANES]; +extern u8 selectors_serdes_rev2_map[LAST_SERDES_TYPE][MAX_SERDES_LANES]; + +u8 hws_ctrl_serdes_rev_get(void); +int mv_update_serdes_select_phy_mode_seq(void); +int hws_board_topology_load(struct serdes_map *serdes_map_array); +enum serdes_seq serdes_type_and_speed_to_speed_seq(enum serdes_type serdes_type, + enum serdes_speed baud_rate); +int hws_serdes_seq_init(void); +int hws_serdes_seq_db_init(void); +int hws_power_up_serdes_lanes(struct serdes_map *serdes_config_map); +int hws_ctrl_high_speed_serdes_phy_config(void); +int serdes_power_up_ctrl(u32 serdes_num, int serdes_power_up, + enum serdes_type serdes_type, + enum serdes_speed baud_rate, + enum serdes_mode serdes_mode, + enum ref_clock ref_clock); +int serdes_power_up_ctrl_ext(u32 serdes_num, int serdes_power_up, + enum serdes_type serdes_type, + enum serdes_speed baud_rate, + enum serdes_mode serdes_mode, + enum ref_clock ref_clock); +u32 hws_serdes_silicon_ref_clock_get(void); +int hws_serdes_pex_ref_clock_get(enum serdes_type serdes_type, + enum ref_clock *ref_clock); +int hws_ref_clock_set(u32 serdes_num, enum serdes_type serdes_type, + enum ref_clock ref_clock); +int hws_update_serdes_phy_selectors(struct serdes_map *serdes_config_map); +u32 hws_serdes_get_phy_selector_val(int serdes_num, + enum serdes_type serdes_type); +u32 hws_serdes_get_ref_clock_val(enum serdes_type serdes_type); +u32 hws_serdes_get_max_lane(void); +int hws_get_ext_base_addr(u32 serdes_num, u32 base_addr, u32 unit_base_offset, + u32 *unit_base_reg, u32 *unit_offset); +int hws_pex_tx_config_seq(struct serdes_map *serdes_map); +u32 hws_get_physical_serdes_num(u32 serdes_num); +int hws_is_serdes_active(u8 lane_num); + +#endif /* _HIGH_SPEED_ENV_SPEC_H */ diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec-38x.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec-38x.c new file mode 100644 index 0000000..5f2c3eb --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec-38x.c @@ -0,0 +1,1009 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "high_speed_topology_spec.h" +#include "sys_env_lib.h" + +#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT +/* + * This is an example implementation for this custom board + * specific function + */ +static struct serdes_map custom_board_topology_config[] = { + /* Customer Board Topology - reference from Marvell DB-GP board */ + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SATA3, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +int hws_board_topology_load(struct serdes_map *serdes_map_array) +{ + serdes_map_array = custom_board_topology_config; +} +#endif + +load_topology_func_ptr load_topology_func_arr[] = { + load_topology_rd, /* RD NAS */ + load_topology_db, /* 6820 DB-BP (A38x) */ + load_topology_rd, /* RD AP */ + load_topology_db_ap, /* DB AP */ + load_topology_db_gp, /* DB GP */ + load_topology_db_381, /* 6821 DB-BP (A381) */ + load_topology_db_amc, /* DB-AMC */ +}; + +/*****************************************/ +/** Load topology - Marvell 380 DB - BP **/ +/*****************************************/ +/* Configuration options */ +struct serdes_map db_config_default[MAX_SERDES_LANES] = { + {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {SATA3, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +struct serdes_map db_config_slm1363_c[MAX_SERDES_LANES] = { + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {PEX3, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, +}; + +struct serdes_map db_config_slm1363_d[MAX_SERDES_LANES] = { + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + {PEX3, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +struct serdes_map db_config_slm1363_e[MAX_SERDES_LANES] = { + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +struct serdes_map db_config_slm1363_f[MAX_SERDES_LANES] = { + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {PEX3, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +struct serdes_map db_config_slm1364_d[MAX_SERDES_LANES] = { + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII0, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +struct serdes_map db_config_slm1364_e[MAX_SERDES_LANES] = { + {SGMII0, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0} +}; + +struct serdes_map db_config_slm1364_f[MAX_SERDES_LANES] = { + {SGMII0, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0} +}; + +/*************************************************************************/ +/** The following structs are mapping for DB board 'SatR' configuration **/ +/*************************************************************************/ +struct serdes_map db_satr_config_lane1[SATR_DB_LANE1_MAX_OPTIONS] = { + /* 0 */ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, + 0}, + /* 1 */ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + /* 2 */ {SATA0, SERDES_SPEED_3_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + /* 3 */ {SGMII0, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, + /* 4 */ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, + /* 5 */ {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, + /* 6 */ {QSGMII, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +struct serdes_map db_satr_config_lane2[SATR_DB_LANE2_MAX_OPTIONS] = { + /* 0 */ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, + 0}, + /* 1 */ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + /* 2 */ {SATA1, SERDES_SPEED_3_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + /* 3 */ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, + 0} +}; + +/*******************************************************/ +/* Configuration options DB ****************************/ +/* mapping from TWSI address data to configuration map */ +/*******************************************************/ +struct serdes_map *topology_config_db[] = { + db_config_slm1363_c, + db_config_slm1363_d, + db_config_slm1363_e, + db_config_slm1363_f, + db_config_slm1364_d, + db_config_slm1364_e, + db_config_slm1364_f, + db_config_default +}; + +/*************************************/ +/** Load topology - Marvell DB - AP **/ +/*************************************/ +struct serdes_map db_ap_config_default[MAX_SERDES_LANES] = { + /* 0 */ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + /* 1 */ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, + /* 2 */ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + /* 3 */ {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, + /* 4 */ {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, + /* 5 */ {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0} +}; + +/*************************************/ +/** Load topology - Marvell DB - GP **/ +/*************************************/ +struct serdes_map db_gp_config_default[MAX_SERDES_LANES] = { + /* 0 */ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + /* 1 */ {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + /* 2 */ {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + /* 3 */ {SATA3, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + /* 4 */ {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + /* 5 */ {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, + 0} +}; + +struct serdes_map db_amc_config_default[MAX_SERDES_LANES] = { + /* 0 */ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + /* 1 */ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + /* 2 */ {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + /* 3 */ {PEX3, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + /* 4 */ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, + /* 5 */ {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, +}; + +/*****************************************/ +/** Load topology - Marvell 381 DB - BP **/ +/*****************************************/ +/* Configuration options */ +struct serdes_map db381_config_default[MAX_SERDES_LANES] = { + {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1}, + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +struct serdes_map db_config_slm1427[MAX_SERDES_LANES] = { + {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1}, + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 1, 1}, + {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 1, 1} +}; + +struct serdes_map db_config_slm1426[MAX_SERDES_LANES] = { + {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1}, + {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 1, 1}, + {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1}, + {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 1, 1} +}; + +/* + * this array must be aligned with enum topology_config_db381 enum, + * every update to this array requires update to enum topology_config_db381 + * enum + */ +struct serdes_map *topology_config_db_381[] = { + db_config_slm1427, + db_config_slm1426, + db381_config_default, +}; + +u8 topology_config_db_mode_get(void) +{ + u8 mode; + + DEBUG_INIT_FULL_S("\n### topology_config_db_mode_get ###\n"); + + /* Default - return DB_CONFIG_DEFAULT */ + + if (!i2c_read(DB_GET_MODE_SLM1363_ADDR, 0, 1, &mode, 1)) { + switch (mode & 0xf) { + case 0xc: + DEBUG_INIT_S("\nInit DB board SLM 1363 C topology\n"); + return DB_CONFIG_SLM1363_C; + case 0xd: + DEBUG_INIT_S("\nInit DB board SLM 1363 D topology\n"); + return DB_CONFIG_SLM1363_D; + case 0xe: + DEBUG_INIT_S("\nInit DB board SLM 1363 E topology\n"); + return DB_CONFIG_SLM1363_E; + case 0xf: + DEBUG_INIT_S("\nInit DB board SLM 1363 F topology\n"); + return DB_CONFIG_SLM1363_F; + default: /* not the right module */ + break; + } + } + + /* SLM1364 Module */ + if (i2c_read(DB_GET_MODE_SLM1364_ADDR, 0, 1, &mode, 1)) { + DEBUG_INIT_S("\nInit DB board default topology\n"); + return DB_CONFIG_DEFAULT; + } + + switch (mode & 0xf) { + case 0xd: + DEBUG_INIT_S("\nInit DB board SLM 1364 D topology\n"); + return DB_CONFIG_SLM1364_D; + case 0xe: + DEBUG_INIT_S("\nInit DB board SLM 1364 E topology\n"); + return DB_CONFIG_SLM1364_E; + case 0xf: + DEBUG_INIT_S("\nInit DB board SLM 1364 F topology\n"); + return DB_CONFIG_SLM1364_F; + default: /* Default configuration */ + DEBUG_INIT_S("\nInit DB board default topology\n"); + return DB_CONFIG_DEFAULT; + } +} + +u8 topology_config_db_381_mode_get(void) +{ + u8 mode; + + DEBUG_INIT_FULL_S("\n### topology_config_db_381_mode_get ###\n"); + + if (!i2c_read(DB381_GET_MODE_SLM1426_1427_ADDR, 0, 2, &mode, 1)) { + switch (mode & 0xf) { + case 0x1: + DEBUG_INIT_S("\nInit DB-381 board SLM 1427 topology\n"); + return DB_CONFIG_SLM1427; + case 0x2: + DEBUG_INIT_S("\nInit DB-381 board SLM 1426 topology\n"); + return DB_CONFIG_SLM1426; + default: /* not the right module */ + break; + } + } + + /* in case not detected any supported module, use default topology */ + DEBUG_INIT_S("\nInit DB-381 board default topology\n"); + return DB_381_CONFIG_DEFAULT; +} + +/* + * Read SatR field 'sgmiispeed' and update lane topology SGMII entries + * speed setup + */ +int update_topology_sgmii_speed(struct serdes_map *serdes_map_array) +{ + u32 serdes_type, lane_num; + u8 config_val; + + /* Update SGMII speed settings by 'sgmiispeed' SatR value */ + for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) { + serdes_type = serdes_map_array[lane_num].serdes_type; + /*Read SatR configuration for SGMII speed */ + if ((serdes_type == SGMII0) || (serdes_type == SGMII1) || + (serdes_type == SGMII2)) { + /* Read SatR 'sgmiispeed' value */ + if (i2c_read(EEPROM_I2C_ADDR, 0, 2, &config_val, 1)) { + printf("%s: TWSI Read of 'sgmiispeed' failed\n", + __func__); + return MV_FAIL; + } + + if (0 == (config_val & 0x40)) { + serdes_map_array[lane_num].serdes_speed = + SERDES_SPEED_1_25_GBPS; + } else { + serdes_map_array[lane_num].serdes_speed = + SERDES_SPEED_3_125_GBPS; + } + } + } + return MV_OK; +} + +struct serdes_map default_lane = { + DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE +}; +int is_custom_topology = 0; /* indicate user of non-default topology */ + +/* + * Read SatR fields (dbserdes1/2 , gpserdes1/2/5) and update lane + * topology accordingly + */ +int update_topology_satr(struct serdes_map *serdes_map_array) +{ + u8 config_val, lane_select, i; + u32 board_id = mv_board_id_get(); + + switch (board_id) { + case DB_68XX_ID: /* read 'dbserdes1' & 'dbserdes2' */ + case DB_BP_6821_ID: + if (i2c_read(EEPROM_I2C_ADDR, 1, 2, &config_val, 1)) { + printf("%s: TWSI Read of 'dbserdes1/2' failed\n", + __func__); + return MV_FAIL; + } + + /* Lane #1 */ + lane_select = (config_val & SATR_DB_LANE1_CFG_MASK) >> + SATR_DB_LANE1_CFG_OFFSET; + if (lane_select >= SATR_DB_LANE1_MAX_OPTIONS) { + printf("\n\%s: Error: invalid value for SatR field 'dbserdes1' (%x)\n", + __func__, lane_select); + printf("\t_skipping Topology update (run 'SatR write default')\n"); + return MV_FAIL; + } + + /* + * If modified default serdes_type for lane#1, update + * topology and mark it as custom + */ + if (serdes_map_array[1].serdes_type != + db_satr_config_lane1[lane_select].serdes_type) { + serdes_map_array[1] = db_satr_config_lane1[lane_select]; + is_custom_topology = 1; + /* DB 381/2 board has inverted SerDes polarity */ + if (board_id == DB_BP_6821_ID) + serdes_map_array[1].swap_rx = + serdes_map_array[1].swap_tx = 1; + } + + /* Lane #2 */ + lane_select = (config_val & SATR_DB_LANE2_CFG_MASK) >> + SATR_DB_LANE2_CFG_OFFSET; + if (lane_select >= SATR_DB_LANE2_MAX_OPTIONS) { + printf("\n\%s: Error: invalid value for SatR field 'dbserdes2' (%x)\n", + __func__, lane_select); + printf("\t_skipping Topology update (run 'SatR write default')\n"); + return MV_FAIL; + } + + /* + * If modified default serdes_type for lane@2, update + * topology and mark it as custom + */ + if (serdes_map_array[2].serdes_type != + db_satr_config_lane2[lane_select].serdes_type) { + serdes_map_array[2] = db_satr_config_lane2[lane_select]; + is_custom_topology = 1; + /* DB 381/2 board has inverted SerDes polarity */ + if (board_id == DB_BP_6821_ID) + serdes_map_array[2].swap_rx = + serdes_map_array[2].swap_tx = 1; + } + + if (is_custom_topology == 1) { + /* + * Check for conflicts with detected lane #1 and + * lane #2 (Disable conflicted lanes) + */ + for (i = 0; i < hws_serdes_get_max_lane(); i++) { + if (i != 1 && serdes_map_array[1].serdes_type == + serdes_map_array[i].serdes_type) { + printf("\t_lane #%d Type conflicts with Lane #1 (Lane #%d disabled)\n", + i, i); + serdes_map_array[i] = + db_satr_config_lane1[0]; + } + + if (i != 2 && + serdes_map_array[2].serdes_type == + serdes_map_array[i].serdes_type) { + printf("\t_lane #%d Type conflicts with Lane #2 (Lane #%d disabled)\n", + i, i); + serdes_map_array[i] = + db_satr_config_lane1[0]; + } + } + } + + break; /* case DB_68XX_ID */ + case DB_GP_68XX_ID: /* read 'gpserdes1' & 'gpserdes2' */ + if (i2c_read(EEPROM_I2C_ADDR, 2, 2, &config_val, 1)) { + printf("%s: TWSI Read of 'gpserdes1/2' failed\n", + __func__); + return MV_FAIL; + } + + /* + * Lane #1: + * lane_select = 0 --> SATA0, + * lane_select = 1 --> PCIe0 (mini PCIe) + */ + lane_select = (config_val & SATR_GP_LANE1_CFG_MASK) >> + SATR_GP_LANE1_CFG_OFFSET; + if (lane_select == 1) { + serdes_map_array[1].serdes_mode = PEX0; + serdes_map_array[1].serdes_speed = SERDES_SPEED_5_GBPS; + serdes_map_array[1].serdes_type = PEX_ROOT_COMPLEX_X1; + /* + * If lane 1 is set to PCIe0 --> disable PCIe0 + * on lane 0 + */ + serdes_map_array[0] = default_lane; + /* indicate user of non-default topology */ + is_custom_topology = 1; + } + printf("Lane 1 detection: %s\n", + lane_select ? "PCIe0 (mini PCIe)" : "SATA0"); + + /* + * Lane #2: + * lane_select = 0 --> SATA1, + * lane_select = 1 --> PCIe1 (mini PCIe) + */ + lane_select = (config_val & SATR_GP_LANE2_CFG_MASK) >> + SATR_GP_LANE2_CFG_OFFSET; + if (lane_select == 1) { + serdes_map_array[2].serdes_type = PEX1; + serdes_map_array[2].serdes_speed = SERDES_SPEED_5_GBPS; + serdes_map_array[2].serdes_mode = PEX_ROOT_COMPLEX_X1; + /* indicate user of non-default topology */ + is_custom_topology = 1; + } + printf("Lane 2 detection: %s\n", + lane_select ? "PCIe1 (mini PCIe)" : "SATA1"); + break; /* case DB_GP_68XX_ID */ + } + + if (is_custom_topology) + printf("\nDetected custom SerDes topology (to restore default run 'SatR write default')\n\n"); + + return MV_OK; +} + +/* + * hws_update_device_toplogy + * DESCRIPTION: Update the default board topology for specific device Id + * INPUT: + * topology_config_ptr - pointer to the Serdes mapping + * topology_mode - topology mode (index) + * OUTPUT: None + * RRETURNS: + * MV_OK - if updating the board topology success + * MV_BAD_PARAM - if the input parameter is wrong + */ +int hws_update_device_toplogy(struct serdes_map *topology_config_ptr, + enum topology_config_db topology_mode) +{ + u32 dev_id = sys_env_device_id_get(); + u32 board_id = mv_board_id_get(); + + switch (topology_mode) { + case DB_CONFIG_DEFAULT: + switch (dev_id) { + case MV_6810: + /* + * DB-AP : default for Lane3=SGMII2 --> + * 6810 supports only 2 SGMII interfaces: + * lane 3 disabled + */ + if (board_id == DB_AP_68XX_ID) { + printf("Device 6810 supports only 2 SGMII interfaces: SGMII-2 @ lane3 disabled\n"); + topology_config_ptr[3] = default_lane; + } + + /* + * 6810 has only 4 SerDes and the forth one is + * Serdes number 5 (i.e. Serdes 4 is not connected), + * therefore we need to copy SerDes 5 configuration + * to SerDes 4 + */ + printf("Device 6810 does not supports SerDes Lane #4: replaced topology entry with lane #5\n"); + topology_config_ptr[4] = topology_config_ptr[5]; + + /* + * No break between cases since the 1st + * 6820 limitation apply on 6810 + */ + case MV_6820: + /* + * DB-GP & DB-BP: default for Lane3=SATA3 --> + * 6810/20 supports only 2 SATA interfaces: + * lane 3 disabled + */ + if ((board_id == DB_68XX_ID) || + (board_id == DB_GP_68XX_ID)) { + printf("Device 6810/20 supports only 2 SATA interfaces: SATA Port 3 @ lane3 disabled\n"); + topology_config_ptr[3] = default_lane; + } + /* + * DB-GP on 6820 only: default for Lane4=SATA2 + * --> 6820 supports only 2 SATA interfaces: + * lane 3 disabled + */ + if (board_id == DB_GP_68XX_ID && dev_id == MV_6820) { + printf("Device 6820 supports only 2 SATA interfaces: SATA Port 2 @ lane4 disabled\n"); + topology_config_ptr[4] = default_lane; + } + break; + default: + break; + } + break; + + default: + printf("sys_env_update_device_toplogy: selected topology is not supported by this routine\n"); + break; + } + + return MV_OK; +} + +int load_topology_db_381(struct serdes_map *serdes_map_array) +{ + u32 lane_num; + u8 topology_mode; + struct serdes_map *topology_config_ptr; + u8 twsi_data; + u8 usb3_host0_or_device = 0, usb3_host1_or_device = 0; + + printf("\nInitialize DB-88F6821-BP board topology\n"); + + /* Getting the relevant topology mode (index) */ + topology_mode = topology_config_db_381_mode_get(); + topology_config_ptr = topology_config_db_381[topology_mode]; + + /* Read USB3.0 mode: HOST/DEVICE */ + if (load_topology_usb_mode_get(&twsi_data) == MV_OK) { + usb3_host0_or_device = (twsi_data & 0x1); + /* Only one USB3 device is enabled */ + if (usb3_host0_or_device == 0) + usb3_host1_or_device = ((twsi_data >> 1) & 0x1); + } + + /* Updating the topology map */ + for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) { + serdes_map_array[lane_num].serdes_mode = + topology_config_ptr[lane_num].serdes_mode; + serdes_map_array[lane_num].serdes_speed = + topology_config_ptr[lane_num].serdes_speed; + serdes_map_array[lane_num].serdes_type = + topology_config_ptr[lane_num].serdes_type; + serdes_map_array[lane_num].swap_rx = + topology_config_ptr[lane_num].swap_rx; + serdes_map_array[lane_num].swap_tx = + topology_config_ptr[lane_num].swap_tx; + + /* Update USB3 device if needed */ + if (usb3_host0_or_device == 1 && + serdes_map_array[lane_num].serdes_type == USB3_HOST0) + serdes_map_array[lane_num].serdes_type = USB3_DEVICE; + + if (usb3_host1_or_device == 1 && + serdes_map_array[lane_num].serdes_type == USB3_HOST1) + serdes_map_array[lane_num].serdes_type = USB3_DEVICE; + } + + /* If not detected any SerDes Site module, read 'SatR' lane setup */ + if (topology_mode == DB_381_CONFIG_DEFAULT) + update_topology_satr(serdes_map_array); + + /* update 'sgmiispeed' settings */ + update_topology_sgmii_speed(serdes_map_array); + + return MV_OK; +} + +int load_topology_db(struct serdes_map *serdes_map_array) +{ + u32 lane_num; + u8 topology_mode; + struct serdes_map *topology_config_ptr; + u8 twsi_data; + u8 usb3_host0_or_device = 0, usb3_host1_or_device = 0; + + printf("\nInitialize DB-88F6820-BP board topology\n"); + + /* Getting the relevant topology mode (index) */ + topology_mode = topology_config_db_mode_get(); + + if (topology_mode == DB_NO_TOPOLOGY) + topology_mode = DB_CONFIG_DEFAULT; + + topology_config_ptr = topology_config_db[topology_mode]; + + /* Update the default board topology device flavours */ + CHECK_STATUS(hws_update_device_toplogy + (topology_config_ptr, topology_mode)); + + /* Read USB3.0 mode: HOST/DEVICE */ + if (load_topology_usb_mode_get(&twsi_data) == MV_OK) { + usb3_host0_or_device = (twsi_data & 0x1); + /* Only one USB3 device is enabled */ + if (usb3_host0_or_device == 0) + usb3_host1_or_device = ((twsi_data >> 1) & 0x1); + } + + /* Updating the topology map */ + for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) { + serdes_map_array[lane_num].serdes_mode = + topology_config_ptr[lane_num].serdes_mode; + serdes_map_array[lane_num].serdes_speed = + topology_config_ptr[lane_num].serdes_speed; + serdes_map_array[lane_num].serdes_type = + topology_config_ptr[lane_num].serdes_type; + serdes_map_array[lane_num].swap_rx = + topology_config_ptr[lane_num].swap_rx; + serdes_map_array[lane_num].swap_tx = + topology_config_ptr[lane_num].swap_tx; + + /* + * Update USB3 device if needed - relevant for + * lane 3,4,5 only + */ + if (lane_num >= 3) { + if ((serdes_map_array[lane_num].serdes_type == + USB3_HOST0) && (usb3_host0_or_device == 1)) + serdes_map_array[lane_num].serdes_type = + USB3_DEVICE; + + if ((serdes_map_array[lane_num].serdes_type == + USB3_HOST1) && (usb3_host1_or_device == 1)) + serdes_map_array[lane_num].serdes_type = + USB3_DEVICE; + } + } + + /* If not detected any SerDes Site module, read 'SatR' lane setup */ + if (topology_mode == DB_CONFIG_DEFAULT) + update_topology_satr(serdes_map_array); + + /* update 'sgmiispeed' settings */ + update_topology_sgmii_speed(serdes_map_array); + + return MV_OK; +} + +int load_topology_db_ap(struct serdes_map *serdes_map_array) +{ + u32 lane_num; + struct serdes_map *topology_config_ptr; + + DEBUG_INIT_FULL_S("\n### load_topology_db_ap ###\n"); + + printf("\nInitialize DB-AP board topology\n"); + topology_config_ptr = db_ap_config_default; + + /* Update the default board topology device flavours */ + CHECK_STATUS(hws_update_device_toplogy + (topology_config_ptr, DB_CONFIG_DEFAULT)); + + /* Updating the topology map */ + for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) { + serdes_map_array[lane_num].serdes_mode = + topology_config_ptr[lane_num].serdes_mode; + serdes_map_array[lane_num].serdes_speed = + topology_config_ptr[lane_num].serdes_speed; + serdes_map_array[lane_num].serdes_type = + topology_config_ptr[lane_num].serdes_type; + serdes_map_array[lane_num].swap_rx = + topology_config_ptr[lane_num].swap_rx; + serdes_map_array[lane_num].swap_tx = + topology_config_ptr[lane_num].swap_tx; + } + + update_topology_sgmii_speed(serdes_map_array); + + return MV_OK; +} + +int load_topology_db_gp(struct serdes_map *serdes_map_array) +{ + u32 lane_num; + struct serdes_map *topology_config_ptr; + int is_sgmii = 0; + + DEBUG_INIT_FULL_S("\n### load_topology_db_gp ###\n"); + + topology_config_ptr = db_gp_config_default; + + printf("\nInitialize DB-GP board topology\n"); + + /* check S@R: if lane 5 is USB3 or SGMII */ + if (load_topology_rd_sgmii_usb(&is_sgmii) != MV_OK) + printf("%s: TWSI Read failed - Loading Default Topology\n", + __func__); + else { + topology_config_ptr[5].serdes_type = + is_sgmii ? SGMII2 : USB3_HOST1; + topology_config_ptr[5].serdes_speed = is_sgmii ? + SERDES_SPEED_3_125_GBPS : SERDES_SPEED_5_GBPS; + topology_config_ptr[5].serdes_mode = SERDES_DEFAULT_MODE; + } + + /* Update the default board topology device flavours */ + CHECK_STATUS(hws_update_device_toplogy + (topology_config_ptr, DB_CONFIG_DEFAULT)); + + /* Updating the topology map */ + for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) { + serdes_map_array[lane_num].serdes_mode = + topology_config_ptr[lane_num].serdes_mode; + serdes_map_array[lane_num].serdes_speed = + topology_config_ptr[lane_num].serdes_speed; + serdes_map_array[lane_num].serdes_type = + topology_config_ptr[lane_num].serdes_type; + serdes_map_array[lane_num].swap_rx = + topology_config_ptr[lane_num].swap_rx; + serdes_map_array[lane_num].swap_tx = + topology_config_ptr[lane_num].swap_tx; + } + + /* + * Update 'gpserdes1/2/3' lane configuration , and 'sgmiispeed' + * for SGMII lanes + */ + update_topology_satr(serdes_map_array); + update_topology_sgmii_speed(serdes_map_array); + + return MV_OK; +} + +int load_topology_db_amc(struct serdes_map *serdes_map_array) +{ + u32 lane_num; + struct serdes_map *topology_config_ptr; + + DEBUG_INIT_FULL_S("\n### load_topology_db_amc ###\n"); + + printf("\nInitialize DB-AMC board topology\n"); + topology_config_ptr = db_amc_config_default; + + /* Update the default board topology device flavours */ + CHECK_STATUS(hws_update_device_toplogy + (topology_config_ptr, DB_CONFIG_DEFAULT)); + + /* Updating the topology map */ + for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) { + serdes_map_array[lane_num].serdes_mode = + topology_config_ptr[lane_num].serdes_mode; + serdes_map_array[lane_num].serdes_speed = + topology_config_ptr[lane_num].serdes_speed; + serdes_map_array[lane_num].serdes_type = + topology_config_ptr[lane_num].serdes_type; + serdes_map_array[lane_num].swap_rx = + topology_config_ptr[lane_num].swap_rx; + serdes_map_array[lane_num].swap_tx = + topology_config_ptr[lane_num].swap_tx; + } + + update_topology_sgmii_speed(serdes_map_array); + + return MV_OK; +} + +int load_topology_rd(struct serdes_map *serdes_map_array) +{ + u8 mode; + + DEBUG_INIT_FULL_S("\n### load_topology_rd ###\n"); + + DEBUG_INIT_S("\nInit RD board "); + + /* Reading mode */ + DEBUG_INIT_FULL_S("load_topology_rd: getting mode\n"); + if (i2c_read(EEPROM_I2C_ADDR, 0, 2, &mode, 1)) { + DEBUG_INIT_S("load_topology_rd: TWSI Read failed\n"); + return MV_FAIL; + } + + /* Updating the topology map */ + DEBUG_INIT_FULL_S("load_topology_rd: Loading board topology details\n"); + + /* RD mode: 0 = NAS, 1 = AP */ + if (((mode >> 1) & 0x1) == 0) { + CHECK_STATUS(load_topology_rd_nas(serdes_map_array)); + } else { + CHECK_STATUS(load_topology_rd_ap(serdes_map_array)); + } + + update_topology_sgmii_speed(serdes_map_array); + + return MV_OK; +} + +int load_topology_rd_nas(struct serdes_map *serdes_map_array) +{ + int is_sgmii = 0; + u32 i; + + DEBUG_INIT_S("\nInit RD NAS topology "); + + /* check if lane 4 is USB3 or SGMII */ + if (load_topology_rd_sgmii_usb(&is_sgmii) != MV_OK) { + DEBUG_INIT_S("load_topology_rd NAS: TWSI Read failed\n"); + return MV_FAIL; + } + + /* Lane 0 */ + serdes_map_array[0].serdes_type = PEX0; + serdes_map_array[0].serdes_speed = SERDES_SPEED_5_GBPS; + serdes_map_array[0].serdes_mode = PEX_ROOT_COMPLEX_X1; + + /* Lane 1 */ + serdes_map_array[1].serdes_type = SATA0; + serdes_map_array[1].serdes_speed = SERDES_SPEED_3_GBPS; + serdes_map_array[1].serdes_mode = SERDES_DEFAULT_MODE; + + /* Lane 2 */ + serdes_map_array[2].serdes_type = SATA1; + serdes_map_array[2].serdes_speed = SERDES_SPEED_3_GBPS; + serdes_map_array[2].serdes_mode = SERDES_DEFAULT_MODE; + + /* Lane 3 */ + serdes_map_array[3].serdes_type = SATA3; + serdes_map_array[3].serdes_speed = SERDES_SPEED_3_GBPS; + serdes_map_array[3].serdes_mode = SERDES_DEFAULT_MODE; + + /* Lane 4 */ + if (is_sgmii == 1) { + DEBUG_INIT_S("Serdes Lane 4 is SGMII\n"); + serdes_map_array[4].serdes_type = SGMII1; + serdes_map_array[4].serdes_speed = SERDES_SPEED_3_125_GBPS; + serdes_map_array[4].serdes_mode = SERDES_DEFAULT_MODE; + } else { + DEBUG_INIT_S("Serdes Lane 4 is USB3\n"); + serdes_map_array[4].serdes_type = USB3_HOST0; + serdes_map_array[4].serdes_speed = SERDES_SPEED_5_GBPS; + serdes_map_array[4].serdes_mode = SERDES_DEFAULT_MODE; + } + + /* Lane 5 */ + serdes_map_array[5].serdes_type = SATA2; + serdes_map_array[5].serdes_speed = SERDES_SPEED_3_GBPS; + serdes_map_array[5].serdes_mode = SERDES_DEFAULT_MODE; + + /* init swap configuration */ + for (i = 0; i <= 5; i++) { + serdes_map_array[i].swap_rx = 0; + serdes_map_array[i].swap_tx = 0; + } + + return MV_OK; +} + +int load_topology_rd_ap(struct serdes_map *serdes_map_array) +{ + int is_sgmii = 0; + u32 i; + + DEBUG_INIT_S("\nInit RD AP topology "); + + /* check if lane 4 is USB3 or SGMII */ + if (load_topology_rd_sgmii_usb(&is_sgmii) != MV_OK) { + DEBUG_INIT_S("load_topology_rd AP: TWSI Read failed\n"); + return MV_FAIL; + } + + /* Lane 0 */ + serdes_map_array[0].serdes_type = DEFAULT_SERDES; + serdes_map_array[0].serdes_speed = LAST_SERDES_SPEED; + serdes_map_array[0].serdes_mode = SERDES_DEFAULT_MODE; + + /* Lane 1 */ + serdes_map_array[1].serdes_type = PEX0; + serdes_map_array[1].serdes_speed = SERDES_SPEED_5_GBPS; + serdes_map_array[1].serdes_mode = PEX_ROOT_COMPLEX_X1; + + /* Lane 2 */ + serdes_map_array[2].serdes_type = PEX1; + serdes_map_array[2].serdes_speed = SERDES_SPEED_5_GBPS; + serdes_map_array[2].serdes_mode = PEX_ROOT_COMPLEX_X1; + + /* Lane 3 */ + serdes_map_array[3].serdes_type = SATA3; + serdes_map_array[3].serdes_speed = SERDES_SPEED_3_GBPS; + serdes_map_array[3].serdes_mode = SERDES_DEFAULT_MODE; + + /* Lane 4 */ + if (is_sgmii == 1) { + DEBUG_INIT_S("Serdes Lane 4 is SGMII\n"); + serdes_map_array[4].serdes_type = SGMII1; + serdes_map_array[4].serdes_speed = SERDES_SPEED_3_125_GBPS; + serdes_map_array[4].serdes_mode = SERDES_DEFAULT_MODE; + } else { + DEBUG_INIT_S("Serdes Lane 4 is USB3\n"); + serdes_map_array[4].serdes_type = USB3_HOST0; + serdes_map_array[4].serdes_speed = SERDES_SPEED_5_GBPS; + serdes_map_array[4].serdes_mode = SERDES_DEFAULT_MODE; + } + + /* Lane 5 */ + serdes_map_array[5].serdes_type = SATA2; + serdes_map_array[5].serdes_speed = SERDES_SPEED_3_GBPS; + serdes_map_array[5].serdes_mode = SERDES_DEFAULT_MODE; + + /* init swap configuration */ + for (i = 0; i <= 5; i++) { + serdes_map_array[i].swap_rx = 0; + serdes_map_array[i].swap_tx = 0; + } + + return MV_OK; +} + +int load_topology_rd_sgmii_usb(int *is_sgmii) +{ + u8 mode; + + /* + * DB-GP board: Device 6810 supports only 2 GbE ports: + * SGMII2 not supported (USE USB3 Host instead) + */ + if (sys_env_device_id_get() == MV_6810) { + printf("Device 6810 supports only 2 GbE ports: SGMII-2 @ lane5 disabled (setting USB3.0 H1 instead)\n"); + *is_sgmii = 0; + return MV_OK; + } + + if (!i2c_read(RD_GET_MODE_ADDR, 1, 2, &mode, 1)) { + *is_sgmii = ((mode >> 2) & 0x1); + } else { + /* else use the default - USB3 */ + *is_sgmii = 0; + } + + if (*is_sgmii) + is_custom_topology = 1; + + printf("Lane 5 detection: %s\n", + *is_sgmii ? "SGMII2" : "USB3.0 Host Port 1"); + + return MV_OK; +} + +/* + * 'usb3port0'/'usb3port1' fields are located in EEPROM, + * at 3rd byte(offset=2), bit 0:1 (respectively) + */ +int load_topology_usb_mode_get(u8 *twsi_data) +{ + if (!i2c_read(EEPROM_I2C_ADDR, 2, 2, twsi_data, 1)) + return MV_OK; + + return MV_ERROR; +} diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec.h b/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec.h new file mode 100644 index 0000000..3cfb1c7 --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec.h @@ -0,0 +1,124 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _HIGHSPEED_TOPOLOGY_SPEC_H +#define _HIGHSPEED_TOPOLOGY_SPEC_H + +#include "high_speed_env_spec.h" + +/* Topology map options for the DB_A38X_BP board */ +enum topology_config_db { + DB_CONFIG_SLM1363_C, + DB_CONFIG_SLM1363_D, + DB_CONFIG_SLM1363_E, + DB_CONFIG_SLM1363_F, + DB_CONFIG_SLM1364_D, + DB_CONFIG_SLM1364_E, + DB_CONFIG_SLM1364_F, + DB_CONFIG_DEFAULT, + DB_NO_TOPOLOGY +}; + +/* + * this enum must be aligned with topology_config_db_381 array, + * every update to this enum requires update to topology_config_db_381 + * array + */ +enum topology_config_db381 { + DB_CONFIG_SLM1427, /* enum for db_config_slm1427 */ + DB_CONFIG_SLM1426, /* enum for db_config_slm1426 */ + DB_381_CONFIG_DEFAULT, + DB_381_NO_TOPOLOGY +}; + +/* A generic function pointer for loading the board topology map */ +typedef int (*load_topology_func_ptr)(struct serdes_map *serdes_map_array); + +extern load_topology_func_ptr load_topology_func_arr[]; + +/* + * topology_config_db_mode_get - + * + * DESCRIPTION: Gets the relevant topology mode (index). + * for load_topology_db use only. + * INPUT: None. + * OUTPUT: None. + * RETURNS: the topology mode + */ +u8 topology_config_db_mode_get(void); + +/* + * load_topology_xxx - + * + * DESCRIPTION: Loads the board topology for the XXX board + * INPUT: serdes_map_array - The struct that will contain + * the board topology map + * OUTPUT: The board topology map. + * RETURNS: MV_OK for success + * MV_FAIL for failure (a wrong topology mode was read + * from the board) + */ + +/* load_topology_db - Loads the board topology for DB Board */ +int load_topology_db(struct serdes_map *serdes_map_array); + +/* load_topology_rd - Loads the board topology for RD Board */ +int load_topology_rd(struct serdes_map *serdes_map_array); + +/* load_topology_rd_nas - Loads the board topology for RD NAS Board */ +int load_topology_rd_nas(struct serdes_map *serdes_map_array); + +/* load_topology_rd_ap - Loads the board topology for RD Ap Board */ +int load_topology_rd_ap(struct serdes_map *serdes_map_array); + +/* load_topology_db_ap - Loads the board topology for DB-AP Board */ +int load_topology_db_ap(struct serdes_map *serdes_map_array); + +/* load_topology_db_gp - Loads the board topology for DB GP Board */ +int load_topology_db_gp(struct serdes_map *serdes_map_array); + +/* load_topology_db_381 - Loads the board topology for 381 DB-BP Board */ +int load_topology_db_381(struct serdes_map *serdes_map_array); + +/* load_topology_db_amc - Loads the board topology for DB-AMC Board */ +int load_topology_db_amc(struct serdes_map *serdes_map_array); + +/* + * hws_update_device_toplogy + * DESCRIPTION: Update the default board topology for specific device Id + * INPUT: + * topology_config_ptr - pointer to the Serdes mapping + * topology_mode - topology mode (index) + * OUTPUT: None + * RRETURNS: + * MV_OK - if updating the board topology success + * MV_BAD_PARAM - if the input parameter is wrong + */ +int hws_update_device_toplogy(struct serdes_map *topology_config_ptr, + enum topology_config_db topology_mode); + +/* + * load_topology_rd_sgmii_usb - + * + * DESCRIPTION: For RD board check if lane 4 is USB3 or SGMII + * INPUT: None + * OUTPUT: is_sgmii - return 1 if lane 4 is SGMII + * return 0 if lane 4 is USB. + * RETURNS: MV_OK for success + */ +int load_topology_rd_sgmii_usb(int *is_sgmii); + +/* + * load_topology_usb_mode_get - + * + * DESCRIPTION: For DB board check if USB3.0 mode + * INPUT: None + * OUTPUT: twsi_data - return data read from S@R via I2C + * RETURNS: MV_OK for success + */ +int load_topology_usb_mode_get(u8 *twsi_data); + +#endif /* _HIGHSPEED_TOPOLOGY_SPEC_H */ diff --git a/arch/arm/mach-mvebu/serdes/a38x/seq_exec.c b/arch/arm/mach-mvebu/serdes/a38x/seq_exec.c new file mode 100644 index 0000000..ee2305b --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/seq_exec.c @@ -0,0 +1,170 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "seq_exec.h" +#include "high_speed_env_spec.h" + +#include "../../../drivers/ddr/marvell/a38x/ddr3_init.h" + +#if defined(MV_DEBUG_INIT_FULL) || defined(MV_DEBUG) +#define DB(x) x +#else +#define DB(x) +#endif + +/* Array for mapping the operation (write, poll or delay) functions */ +op_execute_func_ptr op_execute_func_arr[] = { + write_op_execute, + delay_op_execute, + poll_op_execute +}; + +int write_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx) +{ + u32 unit_base_reg, unit_offset, data, mask, reg_data, reg_addr; + + /* Getting write op params from the input parameter */ + data = params->data[data_arr_idx]; + mask = params->mask; + + /* an empty operation */ + if (data == NO_DATA) + return MV_OK; + + /* get updated base address since it can be different between Serdes */ + CHECK_STATUS(hws_get_ext_base_addr(serdes_num, params->unit_base_reg, + params->unit_offset, + &unit_base_reg, &unit_offset)); + + /* Address calculation */ + reg_addr = unit_base_reg + unit_offset * serdes_num; + +#ifdef SEQ_DEBUG + printf("Write: 0x%x: 0x%x (mask 0x%x) - ", reg_addr, data, mask); +#endif + /* Reading old value */ + reg_data = reg_read(reg_addr); + reg_data &= (~mask); + + /* Writing new data */ + data &= mask; + reg_data |= data; + reg_write(reg_addr, reg_data); + +#ifdef SEQ_DEBUG + printf(" - 0x%x\n", reg_data); +#endif + + return MV_OK; +} + +int delay_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx) +{ + u32 delay; + + /* Getting delay op params from the input parameter */ + delay = params->wait_time; +#ifdef SEQ_DEBUG + printf("Delay: %d\n", delay); +#endif + mdelay(delay); + + return MV_OK; +} + +int poll_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx) +{ + u32 unit_base_reg, unit_offset, data, mask, num_of_loops, wait_time; + u32 poll_counter = 0; + u32 reg_addr, reg_data; + + /* Getting poll op params from the input parameter */ + data = params->data[data_arr_idx]; + mask = params->mask; + num_of_loops = params->num_of_loops; + wait_time = params->wait_time; + + /* an empty operation */ + if (data == NO_DATA) + return MV_OK; + + /* get updated base address since it can be different between Serdes */ + CHECK_STATUS(hws_get_ext_base_addr(serdes_num, params->unit_base_reg, + params->unit_offset, + &unit_base_reg, &unit_offset)); + + /* Address calculation */ + reg_addr = unit_base_reg + unit_offset * serdes_num; + + /* Polling */ +#ifdef SEQ_DEBUG + printf("Poll: 0x%x: 0x%x (mask 0x%x)\n", reg_addr, data, mask); +#endif + + do { + reg_data = reg_read(reg_addr) & mask; + poll_counter++; + udelay(wait_time); + } while ((reg_data != data) && (poll_counter < num_of_loops)); + + if ((poll_counter >= num_of_loops) && (reg_data != data)) { + DEBUG_INIT_S("poll_op_execute: TIMEOUT\n"); + return MV_TIMEOUT; + } + + return MV_OK; +} + +enum mv_op get_cfg_seq_op(struct op_params *params) +{ + if (params->wait_time == 0) + return WRITE_OP; + else if (params->num_of_loops == 0) + return DELAY_OP; + + return POLL_OP; +} + +int mv_seq_exec(u32 serdes_num, u32 seq_id) +{ + u32 seq_idx; + struct op_params *seq_arr; + u32 seq_size; + u32 data_arr_idx; + enum mv_op curr_op; + + DB(printf("\n### mv_seq_exec ###\n")); + DB(printf("seq id: %d\n", seq_id)); + + if (hws_is_serdes_active(serdes_num) != 1) { + printf("mv_seq_exec_ext:Error: SerDes lane %d is not valid\n", + serdes_num); + return MV_BAD_PARAM; + } + + seq_arr = serdes_seq_db[seq_id].op_params_ptr; + seq_size = serdes_seq_db[seq_id].cfg_seq_size; + data_arr_idx = serdes_seq_db[seq_id].data_arr_idx; + + DB(printf("seq_size: %d\n", seq_size)); + DB(printf("data_arr_idx: %d\n", data_arr_idx)); + + /* Executing the sequence operations */ + for (seq_idx = 0; seq_idx < seq_size; seq_idx++) { + curr_op = get_cfg_seq_op(&seq_arr[seq_idx]); + op_execute_func_arr[curr_op](serdes_num, &seq_arr[seq_idx], + data_arr_idx); + } + + return MV_OK; +} diff --git a/arch/arm/mach-mvebu/serdes/a38x/seq_exec.h b/arch/arm/mach-mvebu/serdes/a38x/seq_exec.h new file mode 100644 index 0000000..14f406a --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/seq_exec.h @@ -0,0 +1,65 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _SEQ_EXEC_H +#define _SEQ_EXEC_H + +#define NA 0xff +#define DEFAULT_PARAM 0 +#define MV_BOARD_TCLK_ERROR 0xffffffff + +#define NO_DATA 0xffffffff +#define MAX_DATA_ARRAY 5 +#define FIRST_CELL 0 + +/* Operation types */ +enum mv_op { + WRITE_OP, + DELAY_OP, + POLL_OP, +}; + +/* Operation parameters */ +struct op_params { + u32 unit_base_reg; + u32 unit_offset; + u32 mask; + u32 data[MAX_DATA_ARRAY]; /* data array */ + u8 wait_time; /* msec */ + u16 num_of_loops; /* for polling only */ +}; + +/* + * Sequence parameters. Each sequence contains: + * 1. Sequence id. + * 2. Sequence size (total amount of operations during the sequence) + * 3. a series of operations. operations can be write, poll or delay + * 4. index in the data array (the entry where the relevant data sits) + */ +struct cfg_seq { + struct op_params *op_params_ptr; + u8 cfg_seq_size; + u8 data_arr_idx; +}; + +extern struct cfg_seq serdes_seq_db[]; + +/* + * A generic function type for executing an operation (write, poll or delay) + */ +typedef int (*op_execute_func_ptr)(u32 serdes_num, struct op_params *params, + u32 data_arr_idx); + +/* Specific functions for executing each operation */ +int write_op_execute(u32 serdes_num, struct op_params *params, + u32 data_arr_idx); +int delay_op_execute(u32 serdes_num, struct op_params *params, + u32 data_arr_idx); +int poll_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx); +enum mv_op get_cfg_seq_op(struct op_params *params); +int mv_seq_exec(u32 serdes_num, u32 seq_id); + +#endif /*_SEQ_EXEC_H*/ diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c new file mode 100644 index 0000000..efd3873 --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c @@ -0,0 +1,388 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "seq_exec.h" +#include "sys_env_lib.h" + +#include "../../../drivers/ddr/marvell/a38x/ddr3_a38x.h" + +#ifdef CONFIG_ARMADA_38X +enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = { +/* 6820 6810 6811 6828 */ +/* PEX_UNIT_ID */ { 4, 3, 3, 4}, +/* ETH_GIG_UNIT_ID */ { 3, 2, 3, 3}, +/* USB3H_UNIT_ID */ { 2, 2, 2, 2}, +/* USB3D_UNIT_ID */ { 1, 1, 1, 1}, +/* SATA_UNIT_ID */ { 2, 2, 2, 4}, +/* QSGMII_UNIT_ID */ { 1, 0, 0, 1}, +/* XAUI_UNIT_ID */ { 0, 0, 0, 0}, +/* RXAUI_UNIT_ID */ { 0, 0, 0, 0} +}; +#else /* if (CONFIG_ARMADA_39X) */ +enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = { +/* 6920 6928 */ +/* PEX_UNIT_ID */ { 4, 4}, +/* ETH_GIG_UNIT_ID */ { 3, 4}, +/* USB3H_UNIT_ID */ { 1, 2}, +/* USB3D_UNIT_ID */ { 0, 1}, +/* SATA_UNIT_ID */ { 0, 4}, +/* QSGMII_UNIT_ID */ { 0, 1}, +/* XAUI_UNIT_ID */ { 1, 1}, +/* RXAUI_UNIT_ID */ { 1, 1} +}; +#endif + +u32 g_dev_id = -1; + +u32 mv_board_id_get(void) +{ +#if defined(CONFIG_DB_88F6820_GP) + return DB_GP_68XX_ID; +#else + /* + * Return 0 here for custom board as this should not be used + * for custom boards. + */ + return 0; +#endif +} + +u32 mv_board_tclk_get(void) +{ + u32 value; + + value = (reg_read(DEVICE_SAMPLE_AT_RESET1_REG) >> 15) & 0x1; + + switch (value) { + case (0x0): + return 250000000; + case (0x1): + return 200000000; + default: + return 0xffffffff; + } +} + +u32 mv_board_id_index_get(u32 board_id) +{ + /* + * Marvell Boards use 0x10 as base for Board ID: + * mask MSB to receive index for board ID + */ + return board_id & (MARVELL_BOARD_ID_MASK - 1); +} + +/* + * sys_env_suspend_wakeup_check + * DESCRIPTION: Reads GPIO input for suspend-wakeup indication. + * INPUT: None. + * OUTPUT: + * RETURNS: u32 indicating suspend wakeup status: + * 0 - Not supported, + * 1 - supported: read magic word detect wakeup, + * 2 - detected wakeup from GPIO. + */ +enum suspend_wakeup_status sys_env_suspend_wakeup_check(void) +{ + u32 reg, board_id_index, gpio; + struct board_wakeup_gpio board_gpio[] = MV_BOARD_WAKEUP_GPIO_INFO; + + board_id_index = mv_board_id_index_get(mv_board_id_get()); + if (!(sizeof(board_gpio) / sizeof(struct board_wakeup_gpio) > + board_id_index)) { + printf("\n_failed loading Suspend-Wakeup information (invalid board ID)\n"); + return SUSPEND_WAKEUP_DISABLED; + } + + /* + * - Detect if Suspend-Wakeup is supported on current board + * - Fetch the GPIO number for wakeup status input indication + */ + if (board_gpio[board_id_index].gpio_num == -1) { + /* Suspend to RAM is not supported */ + return SUSPEND_WAKEUP_DISABLED; + } else if (board_gpio[board_id_index].gpio_num == -2) { + /* + * Suspend to RAM is supported but GPIO indication is + * not implemented - Skip + */ + return SUSPEND_WAKEUP_ENABLED; + } else { + gpio = board_gpio[board_id_index].gpio_num; + } + + /* Initialize MPP for GPIO (set MPP = 0x0) */ + reg = reg_read(MPP_CONTROL_REG(MPP_REG_NUM(gpio))); + /* reset MPP21 to 0x0, keep rest of MPP settings*/ + reg &= ~MPP_MASK(gpio); + reg_write(MPP_CONTROL_REG(MPP_REG_NUM(gpio)), reg); + + /* Initialize GPIO as input */ + reg = reg_read(GPP_DATA_OUT_EN_REG(GPP_REG_NUM(gpio))); + reg |= GPP_MASK(gpio); + reg_write(GPP_DATA_OUT_EN_REG(GPP_REG_NUM(gpio)), reg); + + /* + * Check GPP for input status from PIC: 0 - regular init, + * 1 - suspend wakeup + */ + reg = reg_read(GPP_DATA_IN_REG(GPP_REG_NUM(gpio))); + + /* if GPIO is ON: wakeup from S2RAM indication detected */ + return (reg & GPP_MASK(gpio)) ? SUSPEND_WAKEUP_ENABLED_GPIO_DETECTED : + SUSPEND_WAKEUP_DISABLED; +} + +/* + * mv_ctrl_dev_id_index_get + * + * DESCRIPTION: return SOC device index + * INPUT: None + * OUTPUT: None + * RETURN: + * return SOC device index + */ +u32 sys_env_id_index_get(u32 ctrl_model) +{ + switch (ctrl_model) { + case MV_6820_DEV_ID: + return MV_6820_INDEX; + case MV_6810_DEV_ID: + return MV_6810_INDEX; + case MV_6811_DEV_ID: + return MV_6811_INDEX; + case MV_6828_DEV_ID: + return MV_6828_INDEX; + case MV_6920_DEV_ID: + return MV_6920_INDEX; + case MV_6928_DEV_ID: + return MV_6928_INDEX; + default: + return MV_6820_INDEX; + } +} + +u32 sys_env_unit_max_num_get(enum unit_id unit) +{ + u32 dev_id_index; + + if (unit >= MAX_UNITS_ID) { + printf("%s: Error: Wrong unit type (%u)\n", __func__, unit); + return 0; + } + + dev_id_index = sys_env_id_index_get(sys_env_model_get()); + return sys_env_soc_unit_nums[unit][dev_id_index]; +} + +/* + * sys_env_model_get + * DESCRIPTION: Returns 16bit describing the device model (ID) as defined + * in Vendor ID configuration register + */ +u16 sys_env_model_get(void) +{ + u32 default_ctrl_id, ctrl_id = reg_read(DEV_ID_REG); + ctrl_id = (ctrl_id & (DEV_ID_REG_DEVICE_ID_MASK)) >> + DEV_ID_REG_DEVICE_ID_OFFS; + + switch (ctrl_id) { + case MV_6820_DEV_ID: + case MV_6810_DEV_ID: + case MV_6811_DEV_ID: + case MV_6828_DEV_ID: + case MV_6920_DEV_ID: + case MV_6928_DEV_ID: + return ctrl_id; + default: + /* Device ID Default for A38x: 6820 , for A39x: 6920 */ + #ifdef CONFIG_ARMADA_38X + default_ctrl_id = MV_6820_DEV_ID; + #else + default_ctrl_id = MV_6920_DEV_ID; + #endif + printf("%s: Error retrieving device ID (%x), using default ID = %x\n", + __func__, ctrl_id, default_ctrl_id); + return default_ctrl_id; + } +} + +/* + * sys_env_device_id_get + * DESCRIPTION: Returns enum (0..7) index of the device model (ID) + */ +u32 sys_env_device_id_get(void) +{ + char *device_id_str[7] = { + "6810", "6820", "6811", "6828", "NONE", "6920", "6928" + }; + + if (g_dev_id != -1) + return g_dev_id; + + g_dev_id = reg_read(DEVICE_SAMPLE_AT_RESET1_REG); + g_dev_id = g_dev_id >> SAR_DEV_ID_OFFS & SAR_DEV_ID_MASK; + printf("Detected Device ID %s\n", device_id_str[g_dev_id]); + + return g_dev_id; +} + +#ifdef MV_DDR_TOPOLOGY_UPDATE_FROM_TWSI +/* +* sys_env_get_topology_update_info +* DESCRIPTION: Read TWSI fields to update DDR topology structure +* INPUT: None +* OUTPUT: None, 0 means no topology update +* RETURN: +* Bit mask of changes topology features +*/ +#ifdef CONFIG_ARMADA_39X +u32 sys_env_get_topology_update_info( + struct topology_update_info *tui) +{ + /* Set 16/32 bit configuration*/ + tui->update_width = 1; + tui->width = TOPOLOGY_UPDATE_WIDTH_32BIT; + +#ifdef CONFIG_DDR3 + if (1 == sys_env_config_get(MV_CONFIG_DDR_BUSWIDTH)) { + /* 16bit */ + tui->width = TOPOLOGY_UPDATE_WIDTH_16BIT; + } else { + /* 32bit */ + tui->width = TOPOLOGY_UPDATE_WIDTH_32BIT; + } +#endif + + /* Set ECC/no ECC bit configuration */ + tui->update_ecc = 1; + if (0 == sys_env_config_get(MV_CONFIG_DDR_ECC_EN)) { + /* NO ECC */ + tui->ecc = TOPOLOGY_UPDATE_ECC_OFF; + } else { + /* ECC */ + tui->ecc = TOPOLOGY_UPDATE_ECC_ON; + } + + tui->update_ecc_pup3_mode = 1; + tui->ecc_pup_mode_offset = TOPOLOGY_UPDATE_ECC_OFFSET_PUP4; + + return MV_OK; +} +#else /*CONFIG_ARMADA_38X*/ +u32 sys_env_get_topology_update_info( + struct topology_update_info *tui) +{ + u8 config_val; + u8 ecc_mode[A38X_MV_MAX_MARVELL_BOARD_ID - + A38X_MARVELL_BOARD_ID_BASE][5] = TOPOLOGY_UPDATE; + u8 board_id = mv_board_id_get(); + int ret; + + board_id = mv_board_id_index_get(board_id); + ret = i2c_read(EEPROM_I2C_ADDR, 0, 2, &config_val, 1); + if (ret) { + DEBUG_INIT_S("sys_env_get_topology_update_info: TWSI Read failed\n"); + return 0; + } + + /* Set 16/32 bit configuration */ + if ((0 == (config_val & DDR_SATR_CONFIG_MASK_WIDTH)) || + (ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT] == 0)) { + /* 16bit by SatR of 32bit mode not supported for the board */ + if ((ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT] != 0)) { + tui->update_width = 1; + tui->width = TOPOLOGY_UPDATE_WIDTH_16BIT; + } + } else { + /* 32bit */ + if ((ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT] != 0)) { + tui->update_width = 1; + tui->width = TOPOLOGY_UPDATE_WIDTH_32BIT; + } + } + + /* Set ECC/no ECC bit configuration */ + if (0 == (config_val & DDR_SATR_CONFIG_MASK_ECC)) { + /* NO ECC */ + tui->update_ecc = 1; + tui->ecc = TOPOLOGY_UPDATE_ECC_OFF; + } else { + /* ECC */ + if ((ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT_ECC] != 0) || + (ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC] != 0) || + (ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC_PUP3] != 0)) { + tui->update_ecc = 1; + tui->ecc = TOPOLOGY_UPDATE_ECC_ON; + } + } + + /* Set ECC pup bit configuration */ + if (0 == (config_val & DDR_SATR_CONFIG_MASK_ECC_PUP)) { + /* PUP3 */ + /* + * Check if PUP3 configuration allowed, if not - + * force Pup4 with warning message + */ + if ((ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC_PUP3] != 0)) { + if (tui->width == TOPOLOGY_UPDATE_WIDTH_16BIT) { + tui->update_ecc_pup3_mode = 1; + tui->ecc_pup_mode_offset = + TOPOLOGY_UPDATE_ECC_OFFSET_PUP3; + } else { + if ((ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT_ECC] != 0)) { + printf("DDR Topology Update: ECC PUP3 not valid for 32bit mode, force ECC in PUP4\n"); + tui->update_ecc_pup3_mode = 1; + tui->ecc_pup_mode_offset = + TOPOLOGY_UPDATE_ECC_OFFSET_PUP4; + } + } + } else { + if (ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC] != + 0) { + printf("DDR Topology Update: ECC on PUP3 not supported, force ECC on PUP4\n"); + tui->update_ecc_pup3_mode = 1; + tui->ecc_pup_mode_offset = + TOPOLOGY_UPDATE_ECC_OFFSET_PUP4; + } + } + } else { + /* PUP4 */ + if ((ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT_ECC] != 0) || + (ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC] != 0)) { + tui->update_ecc_pup3_mode = 1; + tui->ecc_pup_mode_offset = + TOPOLOGY_UPDATE_ECC_OFFSET_PUP4; + } + } + + /* + * Check for forbidden ECC mode, + * if by default width and pup selection set 32bit ECC mode and this + * mode not supported for the board - config 16bit with ECC on PUP3 + */ + if ((tui->ecc == TOPOLOGY_UPDATE_ECC_ON) && + (tui->width == TOPOLOGY_UPDATE_WIDTH_32BIT)) { + if (ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT_ECC] == 0) { + printf("DDR Topology Update: 32bit mode with ECC not allowed on this board, forced 16bit with ECC on PUP3\n"); + tui->width = TOPOLOGY_UPDATE_WIDTH_16BIT; + tui->update_ecc_pup3_mode = 1; + tui->ecc_pup_mode_offset = + TOPOLOGY_UPDATE_ECC_OFFSET_PUP3; + } + } + + return MV_OK; +} +#endif /* CONFIG_ARMADA_38X */ +#endif /* MV_DDR_TOPOLOGY_UPDATE_FROM_TWSI */ diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h new file mode 100644 index 0000000..3e5373c --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h @@ -0,0 +1,371 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _SYS_ENV_LIB_H +#define _SYS_ENV_LIB_H + +#include "../../../drivers/ddr/marvell/a38x/ddr3_init.h" +#include "../../../drivers/ddr/marvell/a38x/ddr3_hws_hw_training.h" + +/* Serdes definitions */ +#define COMMON_PHY_BASE_ADDR 0x18300 + +#define DEVICE_CONFIGURATION_REG0 0x18284 +#define DEVICE_CONFIGURATION_REG1 0x18288 +#define COMMON_PHY_CONFIGURATION1_REG 0x18300 +#define COMMON_PHY_CONFIGURATION2_REG 0x18304 +#define COMMON_PHY_CONFIGURATION4_REG 0x1830c +#define COMMON_PHY_STATUS1_REG 0x18318 +#define COMMON_PHYS_SELECTORS_REG 0x183fc +#define SOC_CONTROL_REG1 0x18204 +#define GENERAL_PURPOSE_RESERVED0_REG 0x182e0 +#define GBE_CONFIGURATION_REG 0x18460 +#define DEVICE_SAMPLE_AT_RESET1_REG 0x18600 +#define DEVICE_SAMPLE_AT_RESET2_REG 0x18604 +#define DEV_ID_REG 0x18238 + +#define CORE_PLL_PARAMETERS_REG 0xe42e0 +#define CORE_PLL_CONFIG_REG 0xe42e4 + +#define QSGMII_CONTROL_REG1 0x18494 + +#define DEV_ID_REG_DEVICE_ID_OFFS 16 +#define DEV_ID_REG_DEVICE_ID_MASK 0xffff0000 + +#define SAR_DEV_ID_OFFS 27 +#define SAR_DEV_ID_MASK 0x7 + +#define POWER_AND_PLL_CTRL_REG 0xa0004 +#define CALIBRATION_CTRL_REG 0xa0008 +#define DFE_REG0 0xa001c +#define DFE_REG3 0xa0028 +#define RESET_DFE_REG 0xa0148 +#define LOOPBACK_REG 0xa008c +#define SYNC_PATTERN_REG 0xa0090 +#define INTERFACE_REG 0xa0094 +#define ISOLATE_REG 0xa0098 +#define MISC_REG 0xa013c +#define GLUE_REG 0xa0140 +#define GENERATION_DIVIDER_FORCE_REG 0xa0144 +#define PCIE_REG0 0xa0120 +#define LANE_ALIGN_REG0 0xa0124 +#define SQUELCH_FFE_SETTING_REG 0xa0018 +#define G1_SETTINGS_0_REG 0xa0034 +#define G1_SETTINGS_1_REG 0xa0038 +#define G1_SETTINGS_3_REG 0xa0440 +#define G1_SETTINGS_4_REG 0xa0444 +#define G2_SETTINGS_0_REG 0xa003c +#define G2_SETTINGS_1_REG 0xa0040 +#define G2_SETTINGS_2_REG 0xa00f8 +#define G2_SETTINGS_3_REG 0xa0448 +#define G2_SETTINGS_4_REG 0xa044c +#define G3_SETTINGS_0_REG 0xa0044 +#define G3_SETTINGS_1_REG 0xa0048 +#define G3_SETTINGS_3_REG 0xa0450 +#define G3_SETTINGS_4_REG 0xa0454 +#define VTHIMPCAL_CTRL_REG 0xa0104 +#define REF_REG0 0xa0134 +#define CAL_REG6 0xa0168 +#define RX_REG2 0xa0184 +#define RX_REG3 0xa0188 +#define PCIE_REG1 0xa0288 +#define PCIE_REG3 0xa0290 +#define LANE_CFG1_REG 0xa0604 +#define LANE_CFG4_REG 0xa0620 +#define LANE_CFG5_REG 0xa0624 +#define GLOBAL_CLK_CTRL 0xa0704 +#define GLOBAL_MISC_CTRL 0xa0718 +#define GLOBAL_CLK_SRC_HI 0xa0710 + +#define GLOBAL_CLK_CTRL 0xa0704 +#define GLOBAL_MISC_CTRL 0xa0718 +#define GLOBAL_PM_CTRL 0xa0740 + +/* SATA registers */ +#define SATA_CTRL_REG_IND_ADDR 0xa80a0 +#define SATA_CTRL_REG_IND_DATA 0xa80a4 + +#define SATA_VENDOR_PORT_0_REG_ADDR 0xa8178 +#define SATA_VENDOR_PORT_1_REG_ADDR 0xa81f8 +#define SATA_VENDOR_PORT_0_REG_DATA 0xa817c +#define SATA_VENDOR_PORT_1_REG_DATA 0xa81fc + +/* Reference clock values and mask */ +#define POWER_AND_PLL_CTRL_REG_100MHZ_VAL 0x0 +#define POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1 0x1 +#define POWER_AND_PLL_CTRL_REG_25MHZ_VAL_2 0x2 +#define POWER_AND_PLL_CTRL_REG_40MHZ_VAL 0x3 +#define GLOBAL_PM_CTRL_REG_25MHZ_VAL 0x7 +#define GLOBAL_PM_CTRL_REG_40MHZ_VAL 0xc +#define LANE_CFG4_REG_25MHZ_VAL 0x200 +#define LANE_CFG4_REG_40MHZ_VAL 0x300 + +#define POWER_AND_PLL_CTRL_REG_MASK (~(0x1f)) +#define GLOBAL_PM_CTRL_REG_MASK (~(0xff)) +#define LANE_CFG4_REG_MASK (~(0x1f00)) + +#define REF_CLK_SELECTOR_VAL_PEX0(reg_val) (reg_val >> 2) & 0x1 +#define REF_CLK_SELECTOR_VAL_PEX1(reg_val) (reg_val >> 3) & 0x1 +#define REF_CLK_SELECTOR_VAL_PEX2(reg_val) (reg_val >> 30) & 0x1 +#define REF_CLK_SELECTOR_VAL_PEX3(reg_val) (reg_val >> 31) & 0x1 +#define REF_CLK_SELECTOR_VAL(reg_val) (reg_val & 0x1) + +#define MAX_SELECTOR_VAL 10 + +/* TWSI addresses */ +/* starting from A38x A0, i2c address of EEPROM is 0x57 */ +#ifdef CONFIG_ARMADA_39X +#define EEPROM_I2C_ADDR 0x50 +#else +#define EEPROM_I2C_ADDR (sys_env_device_rev_get() == \ + MV_88F68XX_Z1_ID ? 0x50 : 0x57) +#endif +#define RD_GET_MODE_ADDR 0x4c +#define DB_GET_MODE_SLM1363_ADDR 0x25 +#define DB_GET_MODE_SLM1364_ADDR 0x24 +#define DB381_GET_MODE_SLM1426_1427_ADDR 0x56 + +/* DB-BP Board 'SatR' mapping */ +#define SATR_DB_LANE1_MAX_OPTIONS 7 +#define SATR_DB_LANE1_CFG_MASK 0x7 +#define SATR_DB_LANE1_CFG_OFFSET 0 +#define SATR_DB_LANE2_MAX_OPTIONS 4 +#define SATR_DB_LANE2_CFG_MASK 0x38 +#define SATR_DB_LANE2_CFG_OFFSET 3 + +/* GP Board 'SatR' mapping */ +#define SATR_GP_LANE1_CFG_MASK 0x4 +#define SATR_GP_LANE1_CFG_OFFSET 2 +#define SATR_GP_LANE2_CFG_MASK 0x8 +#define SATR_GP_LANE2_CFG_OFFSET 3 + +/* For setting MPP2 and MPP3 to be TWSI mode and MPP 0,1 to UART mode */ +#define MPP_CTRL_REG 0x18000 +#define MPP_SET_MASK (~(0xffff)) +#define MPP_SET_DATA (0x1111) +#define MPP_UART1_SET_MASK (~(0xff000)) +#define MPP_UART1_SET_DATA (0x66000) + +#define AVS_DEBUG_CNTR_REG 0xe4124 +#define AVS_DEBUG_CNTR_DEFAULT_VALUE 0x08008073 + +#define AVS_ENABLED_CONTROL 0xe4130 +#define AVS_LOW_VDD_LIMIT_OFFS 4 +#define AVS_LOW_VDD_LIMIT_MASK (0xff << AVS_LOW_VDD_LIMIT_OFFS) +#define AVS_LOW_VDD_LIMIT_VAL (0x27 << AVS_LOW_VDD_LIMIT_OFFS) + +#define AVS_HIGH_VDD_LIMIT_OFFS 12 +#define AVS_HIGH_VDD_LIMIT_MASK (0xff << AVS_HIGH_VDD_LIMIT_OFFS) +#define AVS_HIGH_VDD_LIMIT_VAL (0x27 << AVS_HIGH_VDD_LIMIT_OFFS) + +/* Board ID numbers */ +#define MARVELL_BOARD_ID_MASK 0x10 +/* Customer boards for A38x */ +#define A38X_CUSTOMER_BOARD_ID_BASE 0x0 +#define A38X_CUSTOMER_BOARD_ID0 (A38X_CUSTOMER_BOARD_ID_BASE + 0) +#define A38X_CUSTOMER_BOARD_ID1 (A38X_CUSTOMER_BOARD_ID_BASE + 1) +#define A38X_MV_MAX_CUSTOMER_BOARD_ID (A38X_CUSTOMER_BOARD_ID_BASE + 2) +#define A38X_MV_CUSTOMER_BOARD_NUM (A38X_MV_MAX_CUSTOMER_BOARD_ID - \ + A38X_CUSTOMER_BOARD_ID_BASE) + +/* Marvell boards for A38x */ +#define A38X_MARVELL_BOARD_ID_BASE 0x10 +#define RD_NAS_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 0) +#define DB_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 1) +#define RD_AP_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 2) +#define DB_AP_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 3) +#define DB_GP_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 4) +#define DB_BP_6821_ID (A38X_MARVELL_BOARD_ID_BASE + 5) +#define DB_AMC_6820_ID (A38X_MARVELL_BOARD_ID_BASE + 6) +#define A38X_MV_MAX_MARVELL_BOARD_ID (A38X_MARVELL_BOARD_ID_BASE + 7) +#define A38X_MV_MARVELL_BOARD_NUM (A38X_MV_MAX_MARVELL_BOARD_ID - \ + A38X_MARVELL_BOARD_ID_BASE) + +/* Customer boards for A39x */ +#define A39X_CUSTOMER_BOARD_ID_BASE 0x20 +#define A39X_CUSTOMER_BOARD_ID0 (A39X_CUSTOMER_BOARD_ID_BASE + 0) +#define A39X_CUSTOMER_BOARD_ID1 (A39X_CUSTOMER_BOARD_ID_BASE + 1) +#define A39X_MV_MAX_CUSTOMER_BOARD_ID (A39X_CUSTOMER_BOARD_ID_BASE + 2) +#define A39X_MV_CUSTOMER_BOARD_NUM (A39X_MV_MAX_CUSTOMER_BOARD_ID - \ + A39X_CUSTOMER_BOARD_ID_BASE) + +/* Marvell boards for A39x */ +#define A39X_MARVELL_BOARD_ID_BASE 0x30 +#define A39X_DB_69XX_ID (A39X_MARVELL_BOARD_ID_BASE + 0) +#define A39X_RD_69XX_ID (A39X_MARVELL_BOARD_ID_BASE + 1) +#define A39X_MV_MAX_MARVELL_BOARD_ID (A39X_MARVELL_BOARD_ID_BASE + 2) +#define A39X_MV_MARVELL_BOARD_NUM (A39X_MV_MAX_MARVELL_BOARD_ID - \ + A39X_MARVELL_BOARD_ID_BASE) + +#ifdef CONFIG_ARMADA_38X +#define CUTOMER_BOARD_ID_BASE A38X_CUSTOMER_BOARD_ID_BASE +#define CUSTOMER_BOARD_ID0 A38X_CUSTOMER_BOARD_ID0 +#define CUSTOMER_BOARD_ID1 A38X_CUSTOMER_BOARD_ID1 +#define MV_MAX_CUSTOMER_BOARD_ID A38X_MV_MAX_CUSTOMER_BOARD_ID +#define MV_CUSTOMER_BOARD_NUM A38X_MV_CUSTOMER_BOARD_NUM +#define MARVELL_BOARD_ID_BASE A38X_MARVELL_BOARD_ID_BASE +#define MV_MAX_MARVELL_BOARD_ID A38X_MV_MAX_MARVELL_BOARD_ID +#define MV_MARVELL_BOARD_NUM A38X_MV_MARVELL_BOARD_NUM +#define MV_DEFAULT_BOARD_ID DB_68XX_ID +#define MV_DEFAULT_DEVICE_ID MV_6811 +#elif defined(CONFIG_ARMADA_39X) +#define CUTOMER_BOARD_ID_BASE A39X_CUSTOMER_BOARD_ID_BASE +#define CUSTOMER_BOARD_ID0 A39X_CUSTOMER_BOARD_ID0 +#define CUSTOMER_BOARD_ID1 A39X_CUSTOMER_BOARD_ID1 +#define MV_MAX_CUSTOMER_BOARD_ID A39X_MV_MAX_CUSTOMER_BOARD_ID +#define MV_CUSTOMER_BOARD_NUM A39X_MV_CUSTOMER_BOARD_NUM +#define MARVELL_BOARD_ID_BASE A39X_MARVELL_BOARD_ID_BASE +#define MV_MAX_MARVELL_BOARD_ID A39X_MV_MAX_MARVELL_BOARD_ID +#define MV_MARVELL_BOARD_NUM A39X_MV_MARVELL_BOARD_NUM +#define MV_DEFAULT_BOARD_ID A39X_DB_69XX_ID +#define MV_DEFAULT_DEVICE_ID MV_6920 +#endif + +#define MV_INVALID_BOARD_ID 0xffffffff + +/* device revesion */ +#define DEV_VERSION_ID_REG 0x1823c +#define REVISON_ID_OFFS 8 +#define REVISON_ID_MASK 0xf00 + +/* A38x revisions */ +#define MV_88F68XX_Z1_ID 0x0 +#define MV_88F68XX_A0_ID 0x4 +/* A39x revisions */ +#define MV_88F69XX_Z1_ID 0x2 + +#define MPP_CONTROL_REG(id) (0x18000 + (id * 4)) +#define GPP_DATA_OUT_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x00) +#define GPP_DATA_OUT_EN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x04) +#define GPP_DATA_IN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x10) +#define MV_GPP_REGS_BASE(unit) (0x18100 + ((unit) * 0x40)) + +#define MPP_REG_NUM(GPIO_NUM) (GPIO_NUM / 8) +#define MPP_MASK(GPIO_NUM) (0xf << 4 * (GPIO_NUM - \ + (MPP_REG_NUM(GPIO_NUM) * 8))); +#define GPP_REG_NUM(GPIO_NUM) (GPIO_NUM / 32) +#define GPP_MASK(GPIO_NUM) (1 << GPIO_NUM % 32) + +/* device ID */ +/* Armada 38x Family */ +#define MV_6810_DEV_ID 0x6810 +#define MV_6811_DEV_ID 0x6811 +#define MV_6820_DEV_ID 0x6820 +#define MV_6828_DEV_ID 0x6828 +/* Armada 39x Family */ +#define MV_6920_DEV_ID 0x6920 +#define MV_6928_DEV_ID 0x6928 + +enum { + MV_6810, + MV_6820, + MV_6811, + MV_6828, + MV_NONE, + MV_6920, + MV_6928, + MV_MAX_DEV_ID, +}; + +#define MV_6820_INDEX 0 +#define MV_6810_INDEX 1 +#define MV_6811_INDEX 2 +#define MV_6828_INDEX 3 + +#define MV_6920_INDEX 0 +#define MV_6928_INDEX 1 + +#ifdef CONFIG_ARMADA_38X +#define MAX_DEV_ID_NUM 4 +#else +#define MAX_DEV_ID_NUM 2 +#endif + +#define MV_6820_INDEX 0 +#define MV_6810_INDEX 1 +#define MV_6811_INDEX 2 +#define MV_6828_INDEX 3 +#define MV_6920_INDEX 0 +#define MV_6928_INDEX 1 + +enum unit_id { + PEX_UNIT_ID, + ETH_GIG_UNIT_ID, + USB3H_UNIT_ID, + USB3D_UNIT_ID, + SATA_UNIT_ID, + QSGMII_UNIT_ID, + XAUI_UNIT_ID, + RXAUI_UNIT_ID, + MAX_UNITS_ID +}; + +struct board_wakeup_gpio { + u32 board_id; + int gpio_num; +}; + +enum suspend_wakeup_status { + SUSPEND_WAKEUP_DISABLED, + SUSPEND_WAKEUP_ENABLED, + SUSPEND_WAKEUP_ENABLED_GPIO_DETECTED, +}; + +/* + * GPIO status indication for Suspend Wakeup: + * If suspend to RAM is supported and GPIO inidcation is implemented, + * set the gpio number + * If suspend to RAM is supported but GPIO indication is not implemented + * set '-2' + * If suspend to RAM is not supported set '-1' + */ +#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT +#ifdef CONFIG_ARMADA_38X +#define MV_BOARD_WAKEUP_GPIO_INFO { \ + {A38X_CUSTOMER_BOARD_ID0, -1 }, \ + {A38X_CUSTOMER_BOARD_ID0, -1 }, \ +}; +#else +#define MV_BOARD_WAKEUP_GPIO_INFO { \ + {A39X_CUSTOMER_BOARD_ID0, -1 }, \ + {A39X_CUSTOMER_BOARD_ID0, -1 }, \ +}; +#endif /* CONFIG_ARMADA_38X */ + +#else + +#ifdef CONFIG_ARMADA_38X +#define MV_BOARD_WAKEUP_GPIO_INFO { \ + {RD_NAS_68XX_ID, -2 }, \ + {DB_68XX_ID, -1 }, \ + {RD_AP_68XX_ID, -2 }, \ + {DB_AP_68XX_ID, -2 }, \ + {DB_GP_68XX_ID, -2 }, \ + {DB_BP_6821_ID, -2 }, \ + {DB_AMC_6820_ID, -2 }, \ +}; +#else +#define MV_BOARD_WAKEUP_GPIO_INFO { \ + {A39X_RD_69XX_ID, -1 }, \ + {A39X_DB_69XX_ID, -1 }, \ +}; +#endif /* CONFIG_ARMADA_38X */ +#endif /* CONFIG_CUSTOMER_BOARD_SUPPORT */ + +u32 mv_board_tclk_get(void); +u32 mv_board_id_get(void); +u32 mv_board_id_index_get(u32 board_id); +u32 sys_env_unit_max_num_get(enum unit_id unit); +enum suspend_wakeup_status sys_env_suspend_wakeup_check(void); +u8 sys_env_device_rev_get(void); +u32 sys_env_device_id_get(void); +u16 sys_env_model_get(void); +struct dlb_config *sys_env_dlb_config_ptr_get(void); +u32 sys_env_get_topology_update_info( + struct topology_update_info *topology_update_info); +u32 sys_env_get_cs_ena_from_reg(void); + +#endif /* _SYS_ENV_LIB_H */ diff --git a/arch/arm/mach-mvebu/serdes/Makefile b/arch/arm/mach-mvebu/serdes/axp/Makefile index a380fee..a380fee 100644 --- a/arch/arm/mach-mvebu/serdes/Makefile +++ b/arch/arm/mach-mvebu/serdes/axp/Makefile diff --git a/arch/arm/mach-mvebu/serdes/board_env_spec.h b/arch/arm/mach-mvebu/serdes/axp/board_env_spec.h index 36e0ed8..36e0ed8 100644 --- a/arch/arm/mach-mvebu/serdes/board_env_spec.h +++ b/arch/arm/mach-mvebu/serdes/axp/board_env_spec.h diff --git a/arch/arm/mach-mvebu/serdes/high_speed_env_lib.c b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c index 702273a..702273a 100644 --- a/arch/arm/mach-mvebu/serdes/high_speed_env_lib.c +++ b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c diff --git a/arch/arm/mach-mvebu/serdes/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c index 115ec2c..115ec2c 100644 --- a/arch/arm/mach-mvebu/serdes/high_speed_env_spec.c +++ b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c diff --git a/arch/arm/mach-mvebu/serdes/high_speed_env_spec.h b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h index e5aa1b0..e10574e 100644 --- a/arch/arm/mach-mvebu/serdes/high_speed_env_spec.h +++ b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h @@ -7,7 +7,7 @@ #ifndef __HIGHSPEED_ENV_SPEC_H #define __HIGHSPEED_ENV_SPEC_H -#include "../../../drivers/ddr/mvebu/ddr3_hw_training.h" +#include "../../../drivers/ddr/marvell/axp/ddr3_hw_training.h" typedef enum { SERDES_UNIT_UNCONNECTED = 0x0, diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c index 402e520..af61ded 100644 --- a/arch/arm/mach-mvebu/spl.c +++ b/arch/arm/mach-mvebu/spl.c @@ -14,10 +14,21 @@ DECLARE_GLOBAL_DATA_PTR; u32 spl_boot_device(void) { - /* Right now only booting via SPI NOR flash is supported */ +#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT) return BOOT_DEVICE_SPI; +#endif +#if defined(CONFIG_SPL_MMC_SUPPORT) + return BOOT_DEVICE_MMC1; +#endif } +#ifdef CONFIG_SPL_MMC_SUPPORT +u32 spl_boot_mode(void) +{ + return MMCSD_MODE_RAW; +} +#endif + void board_init_f(ulong dummy) { /* Set global data pointer */ @@ -26,8 +37,17 @@ void board_init_f(ulong dummy) /* Linux expects the internal registers to be at 0xf1000000 */ arch_cpu_init(); + /* + * Pin muxing needs to be done before UART output, since + * on A38x the UART pins need some re-muxing for output + * to work. + */ + board_early_init_f(); + preloader_console_init(); + timer_init(); + /* First init the serdes PHY's */ serdes_phy_config(); diff --git a/arch/arm/mach-mvebu/timer.c b/arch/arm/mach-mvebu/timer.c index 40c4bc2..c516c41 100644 --- a/arch/arm/mach-mvebu/timer.c +++ b/arch/arm/mach-mvebu/timer.c @@ -41,6 +41,8 @@ #define timestamp gd->arch.tbl #define lastdec gd->arch.lastinc +static int init_done; + /* Timer reload and current value registers */ struct kwtmr_val { u32 reload; /* Timer reload reg */ @@ -112,6 +114,11 @@ void __udelay(unsigned long usec) */ int timer_init(void) { + /* Only init the timer once */ + if (init_done) + return 0; + init_done = 1; + /* load value into timer */ writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR)); writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR)); diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 54bd648..ba0b865 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -1,20 +1,49 @@ if TEGRA +config TEGRA_ARMV7_COMMON + bool "Tegra 32-bit" + select SUPPORT_SPL + select SPL + select OF_CONTROL + select SPL_DISABLE_OF_CONTROL + select CPU_V7 + select DM + select DM_SPI_FLASH + select DM_SERIAL + select DM_I2C + select DM_SPI + select DM_GPIO + choice prompt "Tegra SoC select" optional config TEGRA20 bool "Tegra20 family" + select TEGRA_ARMV7_COMMON config TEGRA30 bool "Tegra30 family" + select TEGRA_ARMV7_COMMON config TEGRA114 bool "Tegra114 family" + select TEGRA_ARMV7_COMMON config TEGRA124 bool "Tegra124 family" + select TEGRA_ARMV7_COMMON + +config TEGRA210 + bool "Tegra210 family" + select OF_CONTROL + select ARM64 + select DM + select DM_SPI_FLASH + select DM_SERIAL + select DM_I2C + select DM_SPI + select DM_GPIO endchoice @@ -25,5 +54,6 @@ source "arch/arm/mach-tegra/tegra20/Kconfig" source "arch/arm/mach-tegra/tegra30/Kconfig" source "arch/arm/mach-tegra/tegra114/Kconfig" source "arch/arm/mach-tegra/tegra124/Kconfig" +source "arch/arm/mach-tegra/tegra210/Kconfig" endif diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index fefc180..0db8ee0 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2010,2011 Nvidia Corporation. +# (C) Copyright 2010-2015 Nvidia Corporation. # # (C) Copyright 2000-2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -24,7 +24,9 @@ obj-y += pinmux-common.o obj-y += powergate.o obj-y += xusb-padctl.o obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o +#TCW Fix this to use a common config switch (CONFIG_LOCK_VPR?) obj-$(CONFIG_TEGRA124) += vpr.o +obj-$(CONFIG_TEGRA210) += vpr.o obj-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o ifndef CONFIG_SPL_BUILD @@ -35,3 +37,4 @@ obj-$(CONFIG_TEGRA20) += tegra20/ obj-$(CONFIG_TEGRA30) += tegra30/ obj-$(CONFIG_TEGRA114) += tegra114/ obj-$(CONFIG_TEGRA124) += tegra124/ +obj-$(CONFIG_TEGRA210) += tegra210/ diff --git a/arch/arm/mach-tegra/ap.c b/arch/arm/mach-tegra/ap.c index 0b94e8a..e62dda5 100644 --- a/arch/arm/mach-tegra/ap.c +++ b/arch/arm/mach-tegra/ap.c @@ -1,5 +1,5 @@ /* -* (C) Copyright 2010-2014 +* (C) Copyright 2010-2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -92,6 +92,13 @@ int tegra_get_chip_sku(void) return TEGRA_SOC_T124; } break; + case CHIPID_TEGRA210: + switch (sku_id) { + case SKU_ID_T210_ENG: + default: + return TEGRA_SOC_T210; + } + break; } /* unknown chip/sku id */ @@ -100,6 +107,7 @@ int tegra_get_chip_sku(void) return TEGRA_SOC_UNKNOWN; } +#ifndef CONFIG_ARM64 static void enable_scu(void) { struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE; @@ -131,8 +139,8 @@ static u32 get_odmdata(void) * on BCTs for currently supported SoCs, which are locked down. * If this changes in new chips, we can revisit this algorithm. */ - - u32 bct_start, odmdata; + unsigned long bct_start; + u32 odmdata; bct_start = readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BCTPTR); odmdata = readl(bct_start + BCT_ODMDATA_OFFSET); @@ -222,3 +230,4 @@ void s_init(void) /* init vpr */ config_vpr(); } +#endif diff --git a/arch/arm/mach-tegra/board.c b/arch/arm/mach-tegra/board.c index 222de6a..40de72d 100644 --- a/arch/arm/mach-tegra/board.c +++ b/arch/arm/mach-tegra/board.c @@ -1,11 +1,12 @@ /* - * (C) Copyright 2010-2014 + * (C) Copyright 2010-2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <spl.h> #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> @@ -17,6 +18,8 @@ #include <asm/arch-tegra/sys_proto.h> #include <asm/arch-tegra/warmboot.h> +void save_boot_params_ret(void); + DECLARE_GLOBAL_DATA_PTR; enum { @@ -29,6 +32,21 @@ enum { UART_COUNT = 5, }; +static bool from_spl __attribute__ ((section(".data"))); + +#ifndef CONFIG_SPL_BUILD +void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) +{ + from_spl = r0 != UBOOT_NOT_LOADED_FROM_SPL; + save_boot_params_ret(); +} +#endif + +bool spl_was_boot_source(void) +{ + return from_spl; +} + #if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) #if !defined(CONFIG_TEGRA124) #error tegra_cpu_is_non_secure has only been validated on Tegra124 @@ -125,12 +143,18 @@ static int uart_configs[] = { -1, FUNCMUX_UART4_GMI, /* UARTD */ -1, -#else /* Tegra124 */ +#elif defined(CONFIG_TEGRA124) FUNCMUX_UART1_KBC, /* UARTA */ -1, -1, FUNCMUX_UART4_GPIO, /* UARTD */ -1, +#else /* Tegra210 */ + FUNCMUX_UART1_UART1, /* UARTA */ + -1, + -1, + FUNCMUX_UART4_UART4, /* UARTD */ + -1, #endif }; @@ -182,7 +206,7 @@ void board_init_uart_f(void) setup_uarts(uart_ids); } -#ifndef CONFIG_SYS_DCACHE_OFF +#if !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_ARM64) void enable_caches(void) { /* Enable D-cache. I-cache is already enabled in start.S */ diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c index ce9b695..36bcfb0 100644 --- a/arch/arm/mach-tegra/board2.c +++ b/arch/arm/mach-tegra/board2.c @@ -196,6 +196,12 @@ void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init"))); int board_early_init_f(void) { + /* Do any special system timer/TSC setup */ +#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) + if (!tegra_cpu_is_non_secure()) +#endif + arch_timer_init(); + pinmux_init(); board_init_uart_f(); @@ -274,3 +280,19 @@ void pad_init_mmc(struct mmc_host *host) #endif /* T30 */ } #endif /* MMC */ + +#ifdef CONFIG_ARM64 +/* + * Most hardware on 64-bit Tegra is still restricted to DMA to the lower + * 32-bits of the physical address space. Cap the maximum usable RAM area + * at 4 GiB to avoid DMA buffers from being allocated beyond the 32-bit + * boundary that most devices can address. + */ +ulong board_get_usable_ram_top(ulong total_size) +{ + if (gd->ram_top > 0x100000000) + return 0x100000000; + + return gd->ram_top; +} +#endif diff --git a/arch/arm/mach-tegra/cache.c b/arch/arm/mach-tegra/cache.c index 94f5bce..0e9cb97 100644 --- a/arch/arm/mach-tegra/cache.c +++ b/arch/arm/mach-tegra/cache.c @@ -21,6 +21,7 @@ #include <asm/arch-tegra/ap.h> #include <asm/arch/gp_padctrl.h> +#ifndef CONFIG_ARM64 void config_cache(void) { u32 reg = 0; @@ -44,3 +45,4 @@ void config_cache(void) reg |= 2; asm("mcr p15, 1, %0, c9, c0, 2" : : "r" (reg)); } +#endif diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index 24047b8..5d968d8 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2015, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -113,7 +113,11 @@ int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn, data = readl(&pll->pll_misc); *cpcon = (data & PLL_CPCON_MASK) >> PLL_CPCON_SHIFT; *lfcon = (data & PLL_LFCON_MASK) >> PLL_LFCON_SHIFT; - +#if defined(CONFIG_TEGRA210) + /* T210 PLLU uses KCP/KVCO instead of CPCON/LFCON */ + *cpcon = (data & PLLU_KCP_MASK) >> PLLU_KCP_SHIFT; + *lfcon = (data & PLLU_KVCO_MASK) >> PLLU_KVCO_SHIFT; +#endif return 0; } @@ -132,14 +136,28 @@ unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn, * - same fields are always mapped at same offsets, except DCCON * - DCCON is always 0, doesn't conflict * - M,N, P of PLLP values are ignored for PLLP + * NOTE: Above is no longer true with T210 - TBD: FIX THIS */ misc_data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT); +#if defined(CONFIG_TEGRA210) + /* T210 PLLU uses KCP/KVCO instead of cpcon/lfcon */ + if (clkid == CLOCK_ID_USB) { + /* preserve EN_LOCKDET, set by default */ + misc_data = readl(&pll->pll_misc); + misc_data |= (cpcon << PLLU_KCP_SHIFT) | + (lfcon << PLLU_KVCO_SHIFT); + } +#endif data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) | (0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT); if (clkid == CLOCK_ID_USB) +#if defined(CONFIG_TEGRA210) + data |= divp << PLLU_DIVP_SHIFT; +#else data |= divp << PLLU_VCO_FREQ_SHIFT; +#endif else data |= divp << PLL_DIVP_SHIFT; if (pll) { @@ -534,8 +552,15 @@ int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon) /* Set cpcon to PLL_MISC */ misc_reg = readl(&pll->pll_misc); +#if !defined(CONFIG_TEGRA210) misc_reg &= ~PLL_CPCON_MASK; misc_reg |= cpcon << PLL_CPCON_SHIFT; +#else + /* T210 uses KCP instead, use the most common bit shift (PLLA/U/D2) */ + misc_reg &= ~PLLU_KCP_MASK; + misc_reg |= cpcon << PLLU_KCP_SHIFT; +#endif + writel(misc_reg, &pll->pll_misc); /* Enable PLL */ @@ -608,12 +633,6 @@ void clock_init(void) debug("PLLC = %d\n", pll_rate[CLOCK_ID_CGENERAL]); debug("PLLD = %d\n", pll_rate[CLOCK_ID_DISPLAY]); debug("PLLX = %d\n", pll_rate[CLOCK_ID_XCPU]); - - /* Do any special system timer/TSC setup */ -#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) - if (!tegra_cpu_is_non_secure()) -#endif - arch_timer_init(); } static void set_avp_clock_source(u32 src) @@ -634,6 +653,7 @@ static void set_avp_clock_source(u32 src) /* * This function is useful on Tegra30, and any later SoCs that have compatible * PLLP configuration registers. + * NOTE: Not used on Tegra210 - see tegra210_setup_pllp in T210 clock.c */ void tegra30_set_up_pllp(void) { diff --git a/arch/arm/mach-tegra/cpu.c b/arch/arm/mach-tegra/cpu.c index c6f3b02..f7d45e8 100644 --- a/arch/arm/mach-tegra/cpu.c +++ b/arch/arm/mach-tegra/cpu.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2015, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -29,6 +29,7 @@ int get_num_cpus(void) { struct apb_misc_gp_ctlr *gp; uint rev; + debug("%s entry\n", __func__); gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE; rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT; @@ -39,6 +40,8 @@ int get_num_cpus(void) break; case CHIPID_TEGRA30: case CHIPID_TEGRA114: + case CHIPID_TEGRA124: + case CHIPID_TEGRA210: default: return 4; break; @@ -128,13 +131,30 @@ struct clk_pll_table tegra_pll_x_table[TEGRA_SOC_CNT][CLOCK_OSC_FREQ_COUNT] = { { .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */ { .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */ }, + + /* + * T210: 700 MHz + * + * Register Field Bits Width + * ------------------------------ + * PLLX_BASE p 24:20 5 + * PLLX_BASE n 15: 8 8 + * PLLX_BASE m 7: 0 8 + */ + { + { .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz = 702 MHz*/ + { .n = 73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz = 700.8 MHz*/ + { .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz = 696 MHz*/ + { .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz = 702 MHz*/ + }, }; static inline void pllx_set_iddq(void) { -#if defined(CONFIG_TEGRA124) +#if defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210) struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; u32 reg; + debug("%s entry\n", __func__); /* Disable IDDQ */ reg = readl(&clkrst->crc_pllx_misc3); @@ -151,15 +171,14 @@ int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm, { int chip = tegra_get_chip(); u32 reg; + debug("%s entry\n", __func__); /* If PLLX is already enabled, just return */ if (readl(&pll->pll_base) & PLL_ENABLE_MASK) { - debug("pllx_set_rate: PLLX already enabled, returning\n"); + debug("%s: PLLX already enabled, returning\n", __func__); return 0; } - debug(" pllx_set_rate entry\n"); - pllx_set_iddq(); /* Set BYPASS, m, n and p to PLLX_BASE */ @@ -182,19 +201,19 @@ int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm, reg = readl(&pll->pll_base); reg &= ~PLL_BYPASS_MASK; writel(reg, &pll->pll_base); - debug("pllx_set_rate: base = 0x%08X\n", reg); + debug("%s: base = 0x%08X\n", __func__, reg); /* Set lock_enable to PLLX_MISC */ reg = readl(&pll->pll_misc); reg |= PLL_LOCK_ENABLE_MASK; writel(reg, &pll->pll_misc); - debug("pllx_set_rate: misc = 0x%08X\n", reg); + debug("%s: misc = 0x%08X\n", __func__, reg); /* Enable PLLX last, once it's all configured */ reg = readl(&pll->pll_base); reg |= PLL_ENABLE_MASK; writel(reg, &pll->pll_base); - debug("pllx_set_rate: base final = 0x%08X\n", reg); + debug("%s: base final = 0x%08X\n", __func__, reg); return 0; } @@ -206,24 +225,23 @@ void init_pllx(void) int soc_type, sku_info, chip_sku; enum clock_osc_freq osc; struct clk_pll_table *sel; - - debug("init_pllx entry\n"); + debug("%s entry\n", __func__); /* get SOC (chip) type */ soc_type = tegra_get_chip(); - debug(" init_pllx: SoC = 0x%02X\n", soc_type); + debug("%s: SoC = 0x%02X\n", __func__, soc_type); /* get SKU info */ sku_info = tegra_get_sku_info(); - debug(" init_pllx: SKU info byte = 0x%02X\n", sku_info); + debug("%s: SKU info byte = 0x%02X\n", __func__, sku_info); /* get chip SKU, combo of the above info */ chip_sku = tegra_get_chip_sku(); - debug(" init_pllx: Chip SKU = %d\n", chip_sku); + debug("%s: Chip SKU = %d\n", __func__, chip_sku); /* get osc freq */ osc = clock_get_osc_freq(); - debug(" init_pllx: osc = %d\n", osc); + debug("%s: osc = %d\n", __func__, osc); /* set pllx */ sel = &tegra_pll_x_table[chip_sku][osc]; @@ -234,6 +252,7 @@ void enable_cpu_clock(int enable) { struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; u32 clk; + debug("%s entry\n", __func__); /* * NOTE: @@ -282,6 +301,7 @@ static void remove_cpu_io_clamps(void) { struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; u32 reg; + debug("%s entry\n", __func__); /* Remove the clamps on the CPU I/O signals */ reg = readl(&pmc->pmc_remove_clamping); @@ -297,6 +317,7 @@ void powerup_cpu(void) struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; u32 reg; int timeout = IO_STABILIZATION_DELAY; + debug("%s entry\n", __func__); if (!is_cpu_powered()) { /* Toggle the CPU power state (OFF -> ON) */ @@ -336,7 +357,7 @@ void reset_A9_cpu(int reset) int num_cpus = get_num_cpus(); int cpu; - debug("reset_a9_cpu entry\n"); + debug("%s entry\n", __func__); /* Hold CPUs 1 onwards in reset, and CPU 0 if asked */ for (cpu = 1; cpu < num_cpus; cpu++) reset_cmplx_set_enable(cpu, mask, 1); @@ -350,7 +371,7 @@ void clock_enable_coresight(int enable) { u32 rst, src = 2; - debug("clock_enable_coresight entry\n"); + debug("%s entry\n", __func__); clock_set_enable(PERIPH_ID_CORESIGHT, enable); reset_set_enable(PERIPH_ID_CORESIGHT, !enable); @@ -377,6 +398,8 @@ void clock_enable_coresight(int enable) void halt_avp(void) { + debug("%s entry\n", __func__); + for (;;) { writel(HALT_COP_EVENT_JTAG | (FLOW_MODE_STOP << 29), FLOW_CTLR_HALT_COP_EVENTS); diff --git a/arch/arm/mach-tegra/cpu.h b/arch/arm/mach-tegra/cpu.h index b4ca44f..3f38969 100644 --- a/arch/arm/mach-tegra/cpu.h +++ b/arch/arm/mach-tegra/cpu.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010-2014 + * (C) Copyright 2010-2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -14,7 +14,7 @@ #define NVBL_PLLP_KHZ 216000 #define CSITE_KHZ 144000 #elif defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114) || \ - defined(CONFIG_TEGRA124) + defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210) #define NVBL_PLLP_KHZ 408000 #define CSITE_KHZ 204000 #else @@ -35,7 +35,7 @@ #define PG_UP_TAG_0_PID_CPU 0x55555555 /* CPU aka "a9" aka "mpcore" */ #define PG_UP_TAG_0 0x0 -#define CORESIGHT_UNLOCK 0xC5ACCE55; +#define CORESIGHT_UNLOCK 0xC5ACCE55 #define EXCEP_VECTOR_CPU_RESET_VECTOR (NV_PA_EVP_BASE + 0x100) #define CSITE_CPU_DBG0_LAR (NV_PA_CSITE_BASE + 0x10FB0) @@ -53,6 +53,10 @@ #define SIMPLE_PLLX (CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE) +/* SB_AA64_RESET_LOW and _HIGH defines for CPU reset vector */ +#define SB_AA64_RESET_LOW 0x6000C230 +#define SB_AA64_RESET_HIGH 0x6000C234 + struct clk_pll_table { u16 n; u16 m; diff --git a/arch/arm/mach-tegra/lowlevel_init.S b/arch/arm/mach-tegra/lowlevel_init.S index 4bc0a3f..1273f94 100644 --- a/arch/arm/mach-tegra/lowlevel_init.S +++ b/arch/arm/mach-tegra/lowlevel_init.S @@ -10,6 +10,20 @@ #include <config.h> #include <linux/linkage.h> +#ifdef CONFIG_ARM64 + .align 5 +ENTRY(reset_cpu) + /* get address for global reset register */ + ldr x1, =PRM_RSTCTRL + ldr w3, [x1] + /* force reset */ + orr w3, w3, #0x10 + str w3, [x1] + mov w0, w0 +1: + b 1b +ENDPROC(reset_cpu) +#else .align 5 ENTRY(reset_cpu) ldr r1, rstctl @ get addr for global reset @@ -23,3 +37,4 @@ _loop_forever: rstctl: .word PRM_RSTCTRL ENDPROC(reset_cpu) +#endif diff --git a/arch/arm/mach-tegra/pinmux-common.c b/arch/arm/mach-tegra/pinmux-common.c index b4a1432..5862c4a 100644 --- a/arch/arm/mach-tegra/pinmux-common.c +++ b/arch/arm/mach-tegra/pinmux-common.c @@ -78,7 +78,7 @@ (((hsm) >= PMUX_HSM_DISABLE) && ((hsm) <= PMUX_HSM_ENABLE)) #endif -#define _R(offset) (u32 *)(NV_PA_APB_MISC_BASE + (offset)) +#define _R(offset) (u32 *)((unsigned long)NV_PA_APB_MISC_BASE + (offset)) #if defined(CONFIG_TEGRA20) diff --git a/arch/arm/mach-tegra/tegra210/Kconfig b/arch/arm/mach-tegra/tegra210/Kconfig new file mode 100644 index 0000000..147e6a8 --- /dev/null +++ b/arch/arm/mach-tegra/tegra210/Kconfig @@ -0,0 +1,18 @@ +if TEGRA210 + +choice + prompt "Tegra210 board select" + +config TARGET_P2571 + bool "NVIDIA Tegra210 P2571 base board" + help + P2571 is a P2530 married to a P1963 I/O board + +endchoice + +config SYS_SOC + default "tegra210" + +source "board/nvidia/p2571/Kconfig" + +endif diff --git a/arch/arm/mach-tegra/tegra210/Makefile b/arch/arm/mach-tegra/tegra210/Makefile new file mode 100644 index 0000000..1fb8d1a --- /dev/null +++ b/arch/arm/mach-tegra/tegra210/Makefile @@ -0,0 +1,11 @@ +# +# (C) Copyright 2013-2015 +# NVIDIA Corporation <www.nvidia.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += clock.o +obj-y += funcmux.o +obj-y += pinmux.o +obj-y += xusb-padctl.o diff --git a/arch/arm/mach-tegra/tegra210/clock.c b/arch/arm/mach-tegra/tegra210/clock.c new file mode 100644 index 0000000..4e7d793 --- /dev/null +++ b/arch/arm/mach-tegra/tegra210/clock.c @@ -0,0 +1,1091 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra210 Clock control functions */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/sysctr.h> +#include <asm/arch/tegra.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/timer.h> +#include <div64.h> +#include <fdtdec.h> + +/* + * Clock types that we can use as a source. The Tegra210 has muxes for the + * peripheral clocks, and in most cases there are four options for the clock + * source. This gives us a clock 'type' and exploits what commonality exists + * in the device. + * + * Letters are obvious, except for T which means CLK_M, and S which means the + * clock derived from 32KHz. Beware that CLK_M (also called OSC in the + * datasheet) and PLL_M are different things. The former is the basic + * clock supplied to the SOC from an external oscillator. The latter is the + * memory clock PLL. + * + * See definitions in clock_id in the header file. + */ +enum clock_type_id { + CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */ + CLOCK_TYPE_MCPA, /* and so on */ + CLOCK_TYPE_MCPT, + CLOCK_TYPE_PCM, + CLOCK_TYPE_PCMT, + CLOCK_TYPE_PDCT, + CLOCK_TYPE_ACPT, + CLOCK_TYPE_ASPTE, + CLOCK_TYPE_PMDACD2T, + CLOCK_TYPE_PCST, + + CLOCK_TYPE_PC2CC3M, + CLOCK_TYPE_PC2CC3S_T, + CLOCK_TYPE_PC2CC3M_T, + CLOCK_TYPE_PC2CC3M_T16, /* PC2CC3M_T, but w/16-bit divisor (I2C) */ + CLOCK_TYPE_MC2CC3P_A, + CLOCK_TYPE_M, + CLOCK_TYPE_MCPTM2C2C3, + CLOCK_TYPE_PC2CC3T_S, + CLOCK_TYPE_AC2CC3P_TS2, + CLOCK_TYPE_PC01C00_C42C41TC40, + + CLOCK_TYPE_COUNT, + CLOCK_TYPE_NONE = -1, /* invalid clock type */ +}; + +enum { + CLOCK_MAX_MUX = 8 /* number of source options for each clock */ +}; + +/* + * Clock source mux for each clock type. This just converts our enum into + * a list of mux sources for use by the code. + * + * Note: + * The extra column in each clock source array is used to store the mask + * bits in its register for the source. + */ +#define CLK(x) CLOCK_ID_ ## x +static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = { + { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(AUDIO), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(AUDIO), CLK(SFROM32KHZ), CLK(PERIPH), CLK(OSC), + CLK(EPCI), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_29}, + { CLK(PERIPH), CLK(MEMORY), CLK(DISPLAY), CLK(AUDIO), + CLK(CGENERAL), CLK(DISPLAY2), CLK(OSC), CLK(NONE), + MASK_BITS_31_29}, + { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_28}, + + /* Additional clock types on Tegra114+ */ + /* CLOCK_TYPE_PC2CC3M */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(MEMORY), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_PC2CC3S_T */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(SFROM32KHZ), CLK(NONE), CLK(OSC), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_PC2CC3M_T */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(MEMORY), CLK(NONE), CLK(OSC), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_PC2CC3M_T, w/16-bit divisor (I2C) */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(MEMORY), CLK(NONE), CLK(OSC), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_MC2CC3P_A */ + { CLK(MEMORY), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(PERIPH), CLK(NONE), CLK(AUDIO), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_M */ + { CLK(MEMORY), CLK(NONE), CLK(NONE), CLK(NONE), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + /* CLOCK_TYPE_MCPTM2C2C3 */ + { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), + CLK(MEMORY2), CLK(CGENERAL2), CLK(CGENERAL3), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_PC2CC3T_S */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(OSC), CLK(NONE), CLK(SFROM32KHZ), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_AC2CC3P_TS2 */ + { CLK(AUDIO), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(PERIPH), CLK(NONE), CLK(OSC), CLK(SRC2), + MASK_BITS_31_29}, + /* CLOCK_TYPE_PC01C00_C42C41TC40 */ + { CLK(PERIPH), CLK(CGENERAL_1), CLK(CGENERAL_0), CLK(NONE), + CLK(CGENERAL4_2), CLK(CGENERAL4_1), CLK(OSC), CLK(CGENERAL4_0), + MASK_BITS_31_29}, +}; + +/* + * Clock type for each peripheral clock source. We put the name in each + * record just so it is easy to match things up + */ +#define TYPE(name, type) type +static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = { + /* 0x00 */ + TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_I2S3, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PC2CC3M), + TYPE(PERIPHC_PWM, CLOCK_TYPE_PC2CC3S_T), + TYPE(PERIPHC_05h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SBC2, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_SBC3, CLOCK_TYPE_PC2CC3M_T), + + /* 0x08 */ + TYPE(PERIPHC_08h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_I2C1, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_I2C5, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_0bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_0ch, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SBC1, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_DISP1, CLOCK_TYPE_PMDACD2T), + TYPE(PERIPHC_DISP2, CLOCK_TYPE_PMDACD2T), + + /* 0x10 */ + TYPE(PERIPHC_10h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_11h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_VI, CLOCK_TYPE_MC2CC3P_A), + TYPE(PERIPHC_13h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_16h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_17h, CLOCK_TYPE_NONE), + + /* 0x18 */ + TYPE(PERIPHC_18h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_VFIR, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_1Bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_1Ch, CLOCK_TYPE_NONE), + TYPE(PERIPHC_HSI, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_UART1, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_UART2, CLOCK_TYPE_PC2CC3M_T), + + /* 0x20 */ + TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MC2CC3P_A), + TYPE(PERIPHC_21h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_22h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_23h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_24h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_25h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_I2C2, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPTM2C2C3), + + /* 0x28 */ + TYPE(PERIPHC_UART3, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_29h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_VI_SENSOR, CLOCK_TYPE_MC2CC3P_A), + TYPE(PERIPHC_2bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_2ch, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SBC4, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_I2C3, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PC2CC3M_T), + + /* 0x30 */ + TYPE(PERIPHC_UART4, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_UART5, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_VDE, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_OWR, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_NOR, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_CSITE, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_DTV, CLOCK_TYPE_NONE), + + /* 0x38 */ + TYPE(PERIPHC_38h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_39h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_3ah, CLOCK_TYPE_NONE), + TYPE(PERIPHC_3bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_MSENC, CLOCK_TYPE_MC2CC3P_A), + TYPE(PERIPHC_TSEC, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_3eh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_OSC, CLOCK_TYPE_NONE), + + /* 0x40 */ + TYPE(PERIPHC_40h, CLOCK_TYPE_NONE), /* start with 0x3b0 */ + TYPE(PERIPHC_MSELECT, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_TSENSOR, CLOCK_TYPE_PC2CC3T_S), + TYPE(PERIPHC_I2S4, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_I2S5, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_I2C4, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_SBC5, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_SBC6, CLOCK_TYPE_PC2CC3M_T), + + /* 0x48 */ + TYPE(PERIPHC_AUDIO, CLOCK_TYPE_AC2CC3P_TS2), + TYPE(PERIPHC_49h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_4ah, CLOCK_TYPE_NONE), + TYPE(PERIPHC_4bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_4ch, CLOCK_TYPE_NONE), + TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_ACTMON, CLOCK_TYPE_PC2CC3S_T), + TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE), + + /* 0x50 */ + TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE), + TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE), + TYPE(PERIPHC_52h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_I2CSLOW, CLOCK_TYPE_PC2CC3S_T), + TYPE(PERIPHC_SYS, CLOCK_TYPE_NONE), + TYPE(PERIPHC_55h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_56h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_57h, CLOCK_TYPE_NONE), + + /* 0x58 */ + TYPE(PERIPHC_58h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_59h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_5ah, CLOCK_TYPE_NONE), + TYPE(PERIPHC_5bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_SATA, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_HDA, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_5fh, CLOCK_TYPE_NONE), + + /* 0x60 */ + TYPE(PERIPHC_XUSB_CORE_HOST, CLOCK_TYPE_NONE), + TYPE(PERIPHC_XUSB_FALCON, CLOCK_TYPE_NONE), + TYPE(PERIPHC_XUSB_FS, CLOCK_TYPE_NONE), + TYPE(PERIPHC_XUSB_CORE_DEV, CLOCK_TYPE_NONE), + TYPE(PERIPHC_XUSB_SS, CLOCK_TYPE_NONE), + TYPE(PERIPHC_CILAB, CLOCK_TYPE_NONE), + TYPE(PERIPHC_CILCD, CLOCK_TYPE_NONE), + TYPE(PERIPHC_CILE, CLOCK_TYPE_NONE), + + /* 0x68 */ + TYPE(PERIPHC_DSIA_LP, CLOCK_TYPE_NONE), + TYPE(PERIPHC_DSIB_LP, CLOCK_TYPE_NONE), + TYPE(PERIPHC_ENTROPY, CLOCK_TYPE_NONE), + TYPE(PERIPHC_DVFS_REF, CLOCK_TYPE_NONE), + TYPE(PERIPHC_DVFS_SOC, CLOCK_TYPE_NONE), + TYPE(PERIPHC_TRACECLKIN, CLOCK_TYPE_NONE), + TYPE(PERIPHC_6eh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_6fh, CLOCK_TYPE_NONE), + + /* 0x70 */ + TYPE(PERIPHC_EMC_LATENCY, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SOC_THERM, CLOCK_TYPE_NONE), + TYPE(PERIPHC_72h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_73h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_74h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_75h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_VI_SENSOR2, CLOCK_TYPE_NONE), + TYPE(PERIPHC_I2C6, CLOCK_TYPE_PC2CC3M_T16), + + /* 0x78 */ + TYPE(PERIPHC_78h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_EMC_DLL, CLOCK_TYPE_MCPTM2C2C3), + TYPE(PERIPHC_7ah, CLOCK_TYPE_NONE), + TYPE(PERIPHC_CLK72MHZ, CLOCK_TYPE_NONE), + TYPE(PERIPHC_7ch, CLOCK_TYPE_NONE), + TYPE(PERIPHC_7dh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_VIC, CLOCK_TYPE_NONE), + TYPE(PERIPHC_7Fh, CLOCK_TYPE_NONE), + + /* 0x80 */ + TYPE(PERIPHC_SDMMC_LEGACY_TM, CLOCK_TYPE_NONE), + TYPE(PERIPHC_NVDEC, CLOCK_TYPE_NONE), + TYPE(PERIPHC_NVJPG, CLOCK_TYPE_NONE), + TYPE(PERIPHC_NVENC, CLOCK_TYPE_NONE), + TYPE(PERIPHC_84h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_85h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_86h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_87h, CLOCK_TYPE_NONE), + + /* 0x88 */ + TYPE(PERIPHC_88h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_89h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_DMIC3, CLOCK_TYPE_NONE), + TYPE(PERIPHC_APE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_QSPI, CLOCK_TYPE_PC01C00_C42C41TC40), + TYPE(PERIPHC_VI_I2C, CLOCK_TYPE_NONE), + TYPE(PERIPHC_USB2_HSIC_TRK, CLOCK_TYPE_NONE), + TYPE(PERIPHC_PEX_SATA_USB_RX_BYP, CLOCK_TYPE_NONE), + + /* 0x90 */ + TYPE(PERIPHC_MAUD, CLOCK_TYPE_NONE), + TYPE(PERIPHC_TSECB, CLOCK_TYPE_NONE), +}; + +/* + * This array translates a periph_id to a periphc_internal_id + * + * Not present/matched up: + * uint vi_sensor; _VI_SENSOR_0, 0x1A8 + * SPDIF - which is both 0x08 and 0x0c + * + */ +#define NONE(name) (-1) +#define OFFSET(name, value) PERIPHC_ ## name +#define INTERNAL_ID(id) (id & 0x000000ff) +static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = { + /* Low word: 31:0 */ + NONE(CPU), + NONE(COP), + NONE(TRIGSYS), + NONE(ISPB), + NONE(RESERVED4), + NONE(TMR), + PERIPHC_UART1, + PERIPHC_UART2, /* and vfir 0x68 */ + + /* 8 */ + NONE(GPIO), + PERIPHC_SDMMC2, + PERIPHC_SPDIF_IN, + PERIPHC_I2S2, + PERIPHC_I2C1, + NONE(RESERVED13), + PERIPHC_SDMMC1, + PERIPHC_SDMMC4, + + /* 16 */ + NONE(TCW), + PERIPHC_PWM, + PERIPHC_I2S3, + NONE(RESERVED19), + PERIPHC_VI, + NONE(RESERVED21), + NONE(USBD), + NONE(ISP), + + /* 24 */ + NONE(RESERVED24), + NONE(RESERVED25), + PERIPHC_DISP2, + PERIPHC_DISP1, + PERIPHC_HOST1X, + NONE(VCP), + PERIPHC_I2S1, + NONE(CACHE2), + + /* Middle word: 63:32 */ + NONE(MEM), + NONE(AHBDMA), + NONE(APBDMA), + NONE(RESERVED35), + NONE(RESERVED36), + NONE(STAT_MON), + NONE(RESERVED38), + NONE(FUSE), + + /* 40 */ + NONE(KFUSE), + PERIPHC_SBC1, /* SBCx = SPIx */ + PERIPHC_NOR, + NONE(RESERVED43), + PERIPHC_SBC2, + NONE(XIO), + PERIPHC_SBC3, + PERIPHC_I2C5, + + /* 48 */ + NONE(DSI), + NONE(RESERVED49), + PERIPHC_HSI, + NONE(RESERVED51), + NONE(CSI), + NONE(RESERVED53), + PERIPHC_I2C2, + PERIPHC_UART3, + + /* 56 */ + NONE(MIPI_CAL), + PERIPHC_EMC, + NONE(USB2), + NONE(USB3), + NONE(RESERVED60), + PERIPHC_VDE, + NONE(BSEA), + NONE(BSEV), + + /* Upper word 95:64 */ + NONE(RESERVED64), + PERIPHC_UART4, + PERIPHC_UART5, + PERIPHC_I2C3, + PERIPHC_SBC4, + PERIPHC_SDMMC3, + NONE(PCIE), + PERIPHC_OWR, + + /* 72 */ + NONE(AFI), + PERIPHC_CSITE, + NONE(PCIEXCLK), + NONE(AVPUCQ), + NONE(LA), + NONE(TRACECLKIN), + NONE(SOC_THERM), + NONE(DTV), + + /* 80 */ + NONE(RESERVED80), + PERIPHC_I2CSLOW, + NONE(DSIB), + PERIPHC_TSEC, + NONE(RESERVED84), + NONE(RESERVED85), + NONE(RESERVED86), + NONE(EMUCIF), + + /* 88 */ + NONE(RESERVED88), + NONE(XUSB_HOST), + NONE(RESERVED90), + PERIPHC_MSENC, + NONE(RESERVED92), + NONE(RESERVED93), + NONE(RESERVED94), + NONE(XUSB_DEV), + + /* V word: 31:0 */ + NONE(CPUG), + NONE(CPULP), + NONE(V_RESERVED2), + PERIPHC_MSELECT, + NONE(V_RESERVED4), + PERIPHC_I2S4, + PERIPHC_I2S5, + PERIPHC_I2C4, + + /* 104 */ + PERIPHC_SBC5, + PERIPHC_SBC6, + PERIPHC_AUDIO, + NONE(APBIF), + NONE(V_RESERVED12), + NONE(V_RESERVED13), + NONE(V_RESERVED14), + PERIPHC_HDA2CODEC2X, + + /* 112 */ + NONE(ATOMICS), + NONE(V_RESERVED17), + NONE(V_RESERVED18), + NONE(V_RESERVED19), + NONE(V_RESERVED20), + NONE(V_RESERVED21), + NONE(V_RESERVED22), + PERIPHC_ACTMON, + + /* 120 */ + NONE(EXTPERIPH1), + NONE(EXTPERIPH2), + NONE(EXTPERIPH3), + NONE(OOB), + PERIPHC_SATA, + PERIPHC_HDA, + NONE(TZRAM), + NONE(SE), + + /* W word: 31:0 */ + NONE(HDA2HDMICODEC), + NONE(SATACOLD), + NONE(W_RESERVED2), + NONE(W_RESERVED3), + NONE(W_RESERVED4), + NONE(W_RESERVED5), + NONE(W_RESERVED6), + NONE(W_RESERVED7), + + /* 136 */ + NONE(CEC), + NONE(W_RESERVED9), + NONE(W_RESERVED10), + NONE(W_RESERVED11), + NONE(W_RESERVED12), + NONE(W_RESERVED13), + NONE(XUSB_PADCTL), + NONE(W_RESERVED15), + + /* 144 */ + NONE(W_RESERVED16), + NONE(W_RESERVED17), + NONE(W_RESERVED18), + NONE(W_RESERVED19), + NONE(W_RESERVED20), + NONE(ENTROPY), + NONE(DDS), + NONE(W_RESERVED23), + + /* 152 */ + NONE(W_RESERVED24), + NONE(W_RESERVED25), + NONE(W_RESERVED26), + NONE(DVFS), + NONE(XUSB_SS), + NONE(W_RESERVED29), + NONE(W_RESERVED30), + NONE(W_RESERVED31), + + /* X word: 31:0 */ + NONE(SPARE), + NONE(X_RESERVED1), + NONE(X_RESERVED2), + NONE(X_RESERVED3), + NONE(CAM_MCLK), + NONE(CAM_MCLK2), + PERIPHC_I2C6, + NONE(X_RESERVED7), + + /* 168 */ + NONE(X_RESERVED8), + NONE(X_RESERVED9), + NONE(X_RESERVED10), + NONE(VIM2_CLK), + NONE(X_RESERVED12), + NONE(X_RESERVED13), + NONE(EMC_DLL), + NONE(X_RESERVED15), + + /* 176 */ + NONE(X_RESERVED16), + NONE(CLK72MHZ), + NONE(VIC), + NONE(X_RESERVED19), + NONE(X_RESERVED20), + NONE(DPAUX), + NONE(SOR0), + NONE(X_RESERVED23), + + /* 184 */ + NONE(GPU), + NONE(X_RESERVED25), + NONE(X_RESERVED26), + NONE(X_RESERVED27), + NONE(X_RESERVED28), + NONE(X_RESERVED29), + NONE(X_RESERVED30), + NONE(X_RESERVED31), + + /* Y: 192 (192 - 223) */ + NONE(Y_RESERVED0), + PERIPHC_SDMMC_LEGACY_TM, + PERIPHC_NVDEC, + PERIPHC_NVJPG, + NONE(Y_RESERVED4), + PERIPHC_DMIC3, /* 197 */ + PERIPHC_APE, /* 198 */ + NONE(Y_RESERVED7), + + /* 200 */ + NONE(Y_RESERVED8), + NONE(Y_RESERVED9), + NONE(Y_RESERVED10), + NONE(Y_RESERVED11), + NONE(Y_RESERVED12), + NONE(Y_RESERVED13), + NONE(Y_RESERVED14), + NONE(Y_RESERVED15), + + /* 208 */ + PERIPHC_VI_I2C, /* 208 */ + NONE(Y_RESERVED17), + NONE(Y_RESERVED18), + PERIPHC_QSPI, /* 211 */ + NONE(Y_RESERVED20), + NONE(Y_RESERVED21), + NONE(Y_RESERVED22), + NONE(Y_RESERVED23), + + /* 216 */ + NONE(Y_RESERVED24), + NONE(Y_RESERVED25), + NONE(Y_RESERVED26), + PERIPHC_NVENC, /* 219 */ + NONE(Y_RESERVED28), + NONE(Y_RESERVED29), + NONE(Y_RESERVED30), + NONE(Y_RESERVED31), +}; + +/* + * Get the oscillator frequency, from the corresponding hardware configuration + * field. Note that Tegra30+ support 3 new higher freqs, but we map back + * to the old T20 freqs. Support for the higher oscillators is TBD. + */ +enum clock_osc_freq clock_get_osc_freq(void) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + reg = readl(&clkrst->crc_osc_ctrl); + reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT; + /* + * 0 = 13MHz, 1 = 16.8MHz, 4 = 19.2MHz, 5 = 38.4MHz, + * 8 = 12MHz, 9 = 48MHz, 12 = 26MHz + */ + if (reg == 5) { + debug("OSC_FREQ is 38.4MHz (%d) ...\n", reg); + /* Map it to 19.2MHz for now. 38.4MHz OSC support TBD */ + return 1; + } + + /* + * Map to most common (T20) freqs (except 38.4, handled above): + * 13/16.8 = 0, 19.2 = 1, 12/48 = 2, 26 = 3 + */ + return reg >> 2; +} + +/* Returns a pointer to the clock source register for a peripheral */ +u32 *get_periph_source_reg(enum periph_id periph_id) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + enum periphc_internal_id internal_id; + + /* Coresight is a special case */ + if (periph_id == PERIPH_ID_CSI) + return &clkrst->crc_clk_src[PERIPH_ID_CSI+1]; + + assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT); + internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]); + assert(internal_id != -1); + + if (internal_id < PERIPHC_VW_FIRST) + /* L, H, U */ + return &clkrst->crc_clk_src[internal_id]; + + if (internal_id < PERIPHC_X_FIRST) { + /* VW */ + internal_id -= PERIPHC_VW_FIRST; + return &clkrst->crc_clk_src_vw[internal_id]; + } + + if (internal_id < PERIPHC_Y_FIRST) { + /* X */ + internal_id -= PERIPHC_X_FIRST; + return &clkrst->crc_clk_src_x[internal_id]; + } + + /* Y */ + internal_id -= PERIPHC_Y_FIRST; + return &clkrst->crc_clk_src_y[internal_id]; +} + +/** + * Given a peripheral ID and the required source clock, this returns which + * value should be programmed into the source mux for that peripheral. + * + * There is special code here to handle the one source type with 5 sources. + * + * @param periph_id peripheral to start + * @param source PLL id of required parent clock + * @param mux_bits Set to number of bits in mux register: 2 or 4 + * @param divider_bits Set to number of divider bits (8 or 16) + * @return mux value (0-4, or -1 if not found) + */ +int get_periph_clock_source(enum periph_id periph_id, + enum clock_id parent, int *mux_bits, int *divider_bits) +{ + enum clock_type_id type; + enum periphc_internal_id internal_id; + int mux; + + assert(clock_periph_id_isvalid(periph_id)); + + internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]); + assert(periphc_internal_id_isvalid(internal_id)); + + type = clock_periph_type[internal_id]; + assert(clock_type_id_isvalid(type)); + + *mux_bits = clock_source[type][CLOCK_MAX_MUX]; + + if (type == CLOCK_TYPE_PC2CC3M_T16) + *divider_bits = 16; + else + *divider_bits = 8; + + for (mux = 0; mux < CLOCK_MAX_MUX; mux++) + if (clock_source[type][mux] == parent) + return mux; + + /* if we get here, either us or the caller has made a mistake */ + printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id, + parent); + return -1; +} + +void clock_set_enable(enum periph_id periph_id, int enable) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 *clk; + u32 reg; + + /* Enable/disable the clock to this peripheral */ + assert(clock_periph_id_isvalid(periph_id)); + if ((int)periph_id < (int)PERIPH_ID_VW_FIRST) + clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)]; + else if ((int)periph_id < (int)PERIPH_ID_X_FIRST) + clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)]; + else if ((int)periph_id < (int)PERIPH_ID_Y_FIRST) + clk = &clkrst->crc_clk_out_enb_x; + else + clk = &clkrst->crc_clk_out_enb_y; + + reg = readl(clk); + if (enable) + reg |= PERIPH_MASK(periph_id); + else + reg &= ~PERIPH_MASK(periph_id); + writel(reg, clk); +} + +void reset_set_enable(enum periph_id periph_id, int enable) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 *reset; + u32 reg; + + /* Enable/disable reset to the peripheral */ + assert(clock_periph_id_isvalid(periph_id)); + if (periph_id < PERIPH_ID_VW_FIRST) + reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)]; + else if ((int)periph_id < (int)PERIPH_ID_X_FIRST) + reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)]; + else if ((int)periph_id < (int)PERIPH_ID_Y_FIRST) + reset = &clkrst->crc_rst_devices_x; + else + reset = &clkrst->crc_rst_devices_y; + + reg = readl(reset); + if (enable) + reg |= PERIPH_MASK(periph_id); + else + reg &= ~PERIPH_MASK(periph_id); + writel(reg, reset); +} + +#ifdef CONFIG_OF_CONTROL +/* + * Convert a device tree clock ID to our peripheral ID. They are mostly + * the same but we are very cautious so we check that a valid clock ID is + * provided. + * + * @param clk_id Clock ID according to tegra210 device tree binding + * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid + */ +enum periph_id clk_id_to_periph_id(int clk_id) +{ + if (clk_id > PERIPH_ID_COUNT) + return PERIPH_ID_NONE; + + switch (clk_id) { + case PERIPH_ID_RESERVED4: + case PERIPH_ID_RESERVED25: + case PERIPH_ID_RESERVED35: + case PERIPH_ID_RESERVED36: + case PERIPH_ID_RESERVED38: + case PERIPH_ID_RESERVED43: + case PERIPH_ID_RESERVED49: + case PERIPH_ID_RESERVED53: + case PERIPH_ID_RESERVED64: + case PERIPH_ID_RESERVED84: + case PERIPH_ID_RESERVED85: + case PERIPH_ID_RESERVED86: + case PERIPH_ID_RESERVED88: + case PERIPH_ID_RESERVED90: + case PERIPH_ID_RESERVED92: + case PERIPH_ID_RESERVED93: + case PERIPH_ID_RESERVED94: + case PERIPH_ID_V_RESERVED2: + case PERIPH_ID_V_RESERVED4: + case PERIPH_ID_V_RESERVED17: + case PERIPH_ID_V_RESERVED18: + case PERIPH_ID_V_RESERVED19: + case PERIPH_ID_V_RESERVED20: + case PERIPH_ID_V_RESERVED21: + case PERIPH_ID_V_RESERVED22: + case PERIPH_ID_W_RESERVED2: + case PERIPH_ID_W_RESERVED3: + case PERIPH_ID_W_RESERVED4: + case PERIPH_ID_W_RESERVED5: + case PERIPH_ID_W_RESERVED6: + case PERIPH_ID_W_RESERVED7: + case PERIPH_ID_W_RESERVED9: + case PERIPH_ID_W_RESERVED10: + case PERIPH_ID_W_RESERVED11: + case PERIPH_ID_W_RESERVED12: + case PERIPH_ID_W_RESERVED13: + case PERIPH_ID_W_RESERVED15: + case PERIPH_ID_W_RESERVED16: + case PERIPH_ID_W_RESERVED17: + case PERIPH_ID_W_RESERVED18: + case PERIPH_ID_W_RESERVED19: + case PERIPH_ID_W_RESERVED20: + case PERIPH_ID_W_RESERVED23: + case PERIPH_ID_W_RESERVED29: + case PERIPH_ID_W_RESERVED30: + case PERIPH_ID_W_RESERVED31: + return PERIPH_ID_NONE; + default: + return clk_id; + } +} +#endif /* CONFIG_OF_CONTROL */ + +/* + * T210 redefines PLLP_OUT2 as PLLP_VCO/DIVP, so do different OUT1-4 setup here. + * PLLP_BASE/MISC/etc. is already set up for 408MHz in the BootROM. + */ +void tegra210_setup_pllp(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + /* Set PLLP_OUT1, 3 & 4 freqs to 9.6, 102 & 204MHz */ + + /* OUT1 */ + /* Assert RSTN before enable */ + reg = PLLP_OUT1_RSTN_EN; + writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]); + /* Set divisor and reenable */ + reg = (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO) + | PLLP_OUT1_OVR | PLLP_OUT1_CLKEN | PLLP_OUT1_RSTN_DIS; + writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]); + + /* OUT3, 4 */ + /* Assert RSTN before enable */ + reg = PLLP_OUT4_RSTN_EN | PLLP_OUT3_RSTN_EN; + writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]); + /* Set divisor and reenable */ + reg = (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO) + | PLLP_OUT4_OVR | PLLP_OUT4_CLKEN | PLLP_OUT4_RSTN_DIS + | (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO) + | PLLP_OUT3_OVR | PLLP_OUT3_CLKEN | PLLP_OUT3_RSTN_DIS; + writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]); + + /* + * NOTE: If you want to change PLLP_OUT2 away from 204MHz, + * you can change PLLP_BASE DIVP here. Currently defaults + * to 1, which is 2^1, or 2, so PLLP_OUT2 is 204MHz. + * See Table 13 in section 5.1.4 in T210 TRM for more info. + */ +} + +void clock_early_init(void) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 data; + + tegra210_setup_pllp(); + + /* + * PLLC output frequency set to 600Mhz + * PLLD output frequency set to 925Mhz + */ + switch (clock_get_osc_freq()) { + case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */ + clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8); + clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12); + break; + + case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */ + clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8); + clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12); + break; + + case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */ + clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8); + clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12); + break; + case CLOCK_OSC_FREQ_19_2: + clock_set_rate(CLOCK_ID_CGENERAL, 125, 4, 0, 0); + clock_set_rate(CLOCK_ID_DISPLAY, 96, 2, 0, 12); + break; + default: + /* + * These are not supported. It is too early to print a + * message and the UART likely won't work anyway due to the + * oscillator being wrong. + */ + break; + } + + /* PLLC_MISC1: Turn IDDQ off. NOTE: T210 PLLC_MISC_1 maps to pll_misc */ + clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, + (1 << PLLC_IDDQ)); + udelay(2); + + /* + * PLLC_MISC: Take PLLC out of reset. NOTE: T210 PLLC_MISC maps + * to pll_out[1] + */ + clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1], + (1 << PLLC_RESET)); + udelay(2); + + /* PLLD_MISC: Set CLKENABLE and LOCK_DETECT bits */ + data = (1 << PLLD_ENABLE_CLK) | (1 << PLLD_EN_LCKDET); + writel(data, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc); + udelay(2); +} + +void arch_timer_init(void) +{ + struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE; + u32 freq, val; + + freq = clock_get_rate(CLOCK_ID_OSC); + debug("%s: osc freq is %dHz [0x%08X]\n", __func__, freq, freq); + + /* ARM CNTFRQ */ +#ifndef CONFIG_ARM64 + asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq)); +#endif + + /* Only Tegra114+ has the System Counter regs */ + debug("%s: setting CNTFID0 to 0x%08X\n", __func__, freq); + writel(freq, &sysctr->cntfid0); + + val = readl(&sysctr->cntcr); + val |= TSC_CNTCR_ENABLE | TSC_CNTCR_HDBG; + writel(val, &sysctr->cntcr); + debug("%s: TSC CNTCR = 0x%08X\n", __func__, val); +} + +#define PLLE_SS_CNTL 0x68 +#define PLLE_SS_CNTL_SSCINCINTR(x) (((x) & 0x3f) << 24) +#define PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16) +#define PLLE_SS_CNTL_SSCINVERT (1 << 15) +#define PLLE_SS_CNTL_SSCCENTER (1 << 14) +#define PLLE_SS_CNTL_SSCBYP (1 << 12) +#define PLLE_SS_CNTL_INTERP_RESET (1 << 11) +#define PLLE_SS_CNTL_BYPASS_SS (1 << 10) +#define PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0) + +#define PLLE_BASE 0x0e8 +#define PLLE_BASE_ENABLE (1 << 30) +#define PLLE_BASE_LOCK_OVERRIDE (1 << 29) +#define PLLE_BASE_PLDIV_CML(x) (((x) & 0xf) << 24) +#define PLLE_BASE_NDIV(x) (((x) & 0xff) << 8) +#define PLLE_BASE_MDIV(x) (((x) & 0xff) << 0) + +#define PLLE_MISC 0x0ec +#define PLLE_MISC_IDDQ_SWCTL (1 << 14) +#define PLLE_MISC_IDDQ_OVERRIDE (1 << 13) +#define PLLE_MISC_LOCK_ENABLE (1 << 9) +#define PLLE_MISC_PTS (1 << 8) +#define PLLE_MISC_VREG_BG_CTRL(x) (((x) & 0x3) << 4) +#define PLLE_MISC_VREG_CTRL(x) (((x) & 0x3) << 2) + +#define PLLE_AUX 0x48c +#define PLLE_AUX_SEQ_ENABLE (1 << 24) +#define PLLE_AUX_ENABLE_SWCTL (1 << 4) + +int tegra_plle_enable(void) +{ + unsigned int m = 1, n = 200, cpcon = 13; + u32 value; + + value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE); + value &= ~PLLE_BASE_LOCK_OVERRIDE; + writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_AUX); + value |= PLLE_AUX_ENABLE_SWCTL; + value &= ~PLLE_AUX_SEQ_ENABLE; + writel(value, NV_PA_CLK_RST_BASE + PLLE_AUX); + + udelay(1); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC); + value |= PLLE_MISC_IDDQ_SWCTL; + value &= ~PLLE_MISC_IDDQ_OVERRIDE; + value |= PLLE_MISC_LOCK_ENABLE; + value |= PLLE_MISC_PTS; + value |= PLLE_MISC_VREG_BG_CTRL(3); + value |= PLLE_MISC_VREG_CTRL(2); + writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC); + + udelay(5); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + value |= PLLE_SS_CNTL_SSCBYP | PLLE_SS_CNTL_INTERP_RESET | + PLLE_SS_CNTL_BYPASS_SS; + writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE); + value &= ~PLLE_BASE_PLDIV_CML(0xf); + value &= ~PLLE_BASE_NDIV(0xff); + value &= ~PLLE_BASE_MDIV(0xff); + value |= PLLE_BASE_PLDIV_CML(cpcon); + value |= PLLE_BASE_NDIV(n); + value |= PLLE_BASE_MDIV(m); + writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE); + + udelay(1); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE); + value |= PLLE_BASE_ENABLE; + writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE); + + /* wait for lock */ + udelay(300); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + value &= ~PLLE_SS_CNTL_SSCINVERT; + value &= ~PLLE_SS_CNTL_SSCCENTER; + + value &= ~PLLE_SS_CNTL_SSCINCINTR(0x3f); + value &= ~PLLE_SS_CNTL_SSCINC(0xff); + value &= ~PLLE_SS_CNTL_SSCMAX(0x1ff); + + value |= PLLE_SS_CNTL_SSCINCINTR(0x20); + value |= PLLE_SS_CNTL_SSCINC(0x01); + value |= PLLE_SS_CNTL_SSCMAX(0x25); + + writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + value &= ~PLLE_SS_CNTL_SSCBYP; + value &= ~PLLE_SS_CNTL_BYPASS_SS; + writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + + udelay(1); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + value &= ~PLLE_SS_CNTL_INTERP_RESET; + writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + + udelay(1); + + return 0; +} diff --git a/arch/arm/mach-tegra/tegra210/funcmux.c b/arch/arm/mach-tegra/tegra210/funcmux.c new file mode 100644 index 0000000..618d228 --- /dev/null +++ b/arch/arm/mach-tegra/tegra210/funcmux.c @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra210 high-level function multiplexing */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/funcmux.h> +#include <asm/arch/pinmux.h> + +int funcmux_select(enum periph_id id, int config) +{ + int bad_config = config != FUNCMUX_DEFAULT; + + switch (id) { + /* + * Add other periph IDs here as needed. + * Note that all pinmux/pads should have already + * been set up in the board pinmux table in + * pinmux-config-<board>.h for all periphs. + * Leave this in for the odd case where a mux + * needs to be changed on-the-fly. + */ + + default: + debug("%s: invalid periph_id %d", __func__, id); + return -1; + } + + if (bad_config) { + debug("%s: invalid config %d for periph_id %d", __func__, + config, id); + return -1; + } + return 0; +} diff --git a/arch/arm/mach-tegra/tegra210/xusb-padctl.c b/arch/arm/mach-tegra/tegra210/xusb-padctl.c new file mode 100644 index 0000000..3c10a96 --- /dev/null +++ b/arch/arm/mach-tegra/tegra210/xusb-padctl.c @@ -0,0 +1,495 @@ +/* + * Copyright (c) 2014-2015, NVIDIA CORPORATION. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#define pr_fmt(fmt) "tegra-xusb-padctl: " fmt + +#include <common.h> +#include <errno.h> +#include <fdtdec.h> +#include <malloc.h> + +#include <asm/io.h> + +#include <asm/arch/clock.h> +#include <asm/arch-tegra/xusb-padctl.h> + +#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> + +struct tegra_xusb_phy_ops { + int (*prepare)(struct tegra_xusb_phy *phy); + int (*enable)(struct tegra_xusb_phy *phy); + int (*disable)(struct tegra_xusb_phy *phy); + int (*unprepare)(struct tegra_xusb_phy *phy); +}; + +struct tegra_xusb_phy { + const struct tegra_xusb_phy_ops *ops; + + struct tegra_xusb_padctl *padctl; +}; + +struct tegra_xusb_padctl { + struct fdt_resource regs; + + unsigned int enable; + + struct tegra_xusb_phy phys[2]; +}; + +static inline u32 padctl_readl(struct tegra_xusb_padctl *padctl, + unsigned long offset) +{ + u32 value = readl(padctl->regs.start + offset); + debug("padctl: %08lx > %08x\n", offset, value); + return value; +} + +static inline void padctl_writel(struct tegra_xusb_padctl *padctl, + u32 value, unsigned long offset) +{ + debug("padctl: %08lx < %08x\n", offset, value); + writel(value, padctl->regs.start + offset); +} + +#define XUSB_PADCTL_ELPG_PROGRAM 0x024 +#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN (1 << 31) +#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY (1 << 30) +#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN (1 << 29) + +static int tegra_xusb_padctl_enable(struct tegra_xusb_padctl *padctl) +{ + u32 value; + + if (padctl->enable++ > 0) + return 0; + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN; + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + udelay(100); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY; + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + udelay(100); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN; + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + return 0; +} + +static int tegra_xusb_padctl_disable(struct tegra_xusb_padctl *padctl) +{ + u32 value; + + if (padctl->enable == 0) { + error("unbalanced enable/disable"); + return 0; + } + + if (--padctl->enable > 0) + return 0; + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN; + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + udelay(100); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY; + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + udelay(100); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN; + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + return 0; +} + +static int phy_prepare(struct tegra_xusb_phy *phy) +{ + int err; + + err = tegra_xusb_padctl_enable(phy->padctl); + if (err < 0) + return err; + + reset_set_enable(PERIPH_ID_PEX_USB_UPHY, 0); + + return 0; +} + +static int phy_unprepare(struct tegra_xusb_phy *phy) +{ + reset_set_enable(PERIPH_ID_PEX_USB_UPHY, 1); + + return tegra_xusb_padctl_disable(phy->padctl); +} + +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1 0x360 +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV_MASK (0xff << 20) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV(x) (((x) & 0xff) << 20) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_MDIV_MASK (0x3 << 16) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_LOCKDET_STATUS (1 << 15) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_PWR_OVRD (1 << 4) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_ENABLE (1 << 3) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP_MASK (0x3 << 1) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP(x) (((x) & 0x3) << 1) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_IDDQ (1 << 0) + +#define XUSB_PADCTL_UPHY_PLL_P0_CTL2 0x364 +#define XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_CTRL_MASK (0xffffff << 4) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_CTRL(x) (((x) & 0xffffff) << 4) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_OVRD (1 << 2) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_DONE (1 << 1) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_EN (1 << 0) + +#define XUSB_PADCTL_UPHY_PLL_P0_CTL4 0x36c +#define XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_EN (1 << 15) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_SEL_MASK (0x3 << 12) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_SEL(x) (((x) & 0x3) << 12) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL4_REFCLKBUF_EN (1 << 8) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL4_REFCLK_SEL_MASK (0xf << 4) + +#define XUSB_PADCTL_UPHY_PLL_P0_CTL5 0x370 +#define XUSB_PADCTL_UPHY_PLL_P0_CTL5_DCO_CTRL_MASK (0xff << 16) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL5_DCO_CTRL(x) (((x) & 0xff) << 16) + +#define XUSB_PADCTL_UPHY_PLL_P0_CTL8 0x37c +#define XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_DONE (1 << 31) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_OVRD (1 << 15) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_CLK_EN (1 << 13) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_EN (1 << 12) + +#define CLK_RST_XUSBIO_PLL_CFG0 0x51c +#define CLK_RST_XUSBIO_PLL_CFG0_SEQ_ENABLE (1 << 24) +#define CLK_RST_XUSBIO_PLL_CFG0_PADPLL_SLEEP_IDDQ (1 << 13) +#define CLK_RST_XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET (1 << 6) +#define CLK_RST_XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL (1 << 2) +#define CLK_RST_XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL (1 << 0) + +static int pcie_phy_enable(struct tegra_xusb_phy *phy) +{ + struct tegra_xusb_padctl *padctl = phy->padctl; + unsigned long start; + u32 value; + + debug("> %s(phy=%p)\n", __func__, phy); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_CTRL_MASK; + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_CTRL(0x136); + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL5); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL5_DCO_CTRL_MASK; + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL5_DCO_CTRL(0x2a); + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL5); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL1_PWR_OVRD; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_OVRD; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_OVRD; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL4); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_SEL_MASK; + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL4_REFCLK_SEL_MASK; + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_SEL(2); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_EN; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL4); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_MDIV_MASK; + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV_MASK; + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV(25); + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_IDDQ; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP_MASK; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + + udelay(1); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL4); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL4_REFCLKBUF_EN; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL4); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_EN; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + + debug(" waiting for calibration\n"); + + start = get_timer(0); + + while (get_timer(start) < 250) { + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + if (value & XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_DONE) + break; + } + + debug(" done\n"); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_EN; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + + debug(" waiting for calibration to stop\n"); + + start = get_timer(0); + + while (get_timer(start) < 250) { + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + if ((value & XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_DONE) == 0) + break; + } + + debug(" done\n"); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL1_ENABLE; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + + debug(" waiting for PLL to lock...\n"); + start = get_timer(0); + + while (get_timer(start) < 250) { + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + if (value & XUSB_PADCTL_UPHY_PLL_P0_CTL1_LOCKDET_STATUS) + break; + } + + debug(" done\n"); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_CLK_EN; + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_EN; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + + debug(" waiting for register calibration...\n"); + start = get_timer(0); + + while (get_timer(start) < 250) { + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + if (value & XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_DONE) + break; + } + + debug(" done\n"); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_EN; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + + debug(" waiting for register calibration to stop...\n"); + start = get_timer(0); + + while (get_timer(start) < 250) { + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + if ((value & XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_DONE) == 0) + break; + } + + debug(" done\n"); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_CLK_EN; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + + value = readl(NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0); + value &= ~CLK_RST_XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL; + value &= ~CLK_RST_XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL; + value |= CLK_RST_XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET; + value |= CLK_RST_XUSBIO_PLL_CFG0_PADPLL_SLEEP_IDDQ; + writel(value, NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_PWR_OVRD; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_OVRD; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_OVRD; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + + udelay(1); + + value = readl(NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0); + value |= CLK_RST_XUSBIO_PLL_CFG0_SEQ_ENABLE; + writel(value, NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0); + + debug("< %s()\n", __func__); + return 0; +} + +static int pcie_phy_disable(struct tegra_xusb_phy *phy) +{ + return 0; +} + +static const struct tegra_xusb_phy_ops pcie_phy_ops = { + .prepare = phy_prepare, + .enable = pcie_phy_enable, + .disable = pcie_phy_disable, + .unprepare = phy_unprepare, +}; + +static struct tegra_xusb_padctl *padctl = &(struct tegra_xusb_padctl) { + .phys = { + [0] = { + .ops = &pcie_phy_ops, + }, + }, +}; + +static int tegra_xusb_padctl_parse_dt(struct tegra_xusb_padctl *padctl, + const void *fdt, int node) +{ + int err; + + err = fdt_get_resource(fdt, node, "reg", 0, &padctl->regs); + if (err < 0) { + error("registers not found"); + return err; + } + + debug("regs: %pa-%pa\n", &padctl->regs.start, + &padctl->regs.end); + + return 0; +} + +static int process_nodes(const void *fdt, int nodes[], unsigned int count) +{ + unsigned int i; + int err; + + debug("> %s(fdt=%p, nodes=%p, count=%u)\n", __func__, fdt, nodes, + count); + + for (i = 0; i < count; i++) { + enum fdt_compat_id id; + + if (!fdtdec_get_is_enabled(fdt, nodes[i])) + continue; + + id = fdtdec_lookup(fdt, nodes[i]); + switch (id) { + case COMPAT_NVIDIA_TEGRA124_XUSB_PADCTL: + case COMPAT_NVIDIA_TEGRA210_XUSB_PADCTL: + break; + + default: + error("unsupported compatible: %s", + fdtdec_get_compatible(id)); + continue; + } + + err = tegra_xusb_padctl_parse_dt(padctl, fdt, nodes[i]); + if (err < 0) { + error("failed to parse DT: %d", + err); + continue; + } + + /* deassert XUSB padctl reset */ + reset_set_enable(PERIPH_ID_XUSB_PADCTL, 0); + + /* only a single instance is supported */ + break; + } + + debug("< %s()\n", __func__); + return 0; +} + +struct tegra_xusb_phy *tegra_xusb_phy_get(unsigned int type) +{ + struct tegra_xusb_phy *phy = NULL; + + switch (type) { + case TEGRA_XUSB_PADCTL_PCIE: + phy = &padctl->phys[0]; + phy->padctl = padctl; + break; + } + + return phy; +} + +int tegra_xusb_phy_prepare(struct tegra_xusb_phy *phy) +{ + if (phy && phy->ops && phy->ops->prepare) + return phy->ops->prepare(phy); + + return phy ? -ENOSYS : -EINVAL; +} + +int tegra_xusb_phy_enable(struct tegra_xusb_phy *phy) +{ + if (phy && phy->ops && phy->ops->enable) + return phy->ops->enable(phy); + + return phy ? -ENOSYS : -EINVAL; +} + +int tegra_xusb_phy_disable(struct tegra_xusb_phy *phy) +{ + if (phy && phy->ops && phy->ops->disable) + return phy->ops->disable(phy); + + return phy ? -ENOSYS : -EINVAL; +} + +int tegra_xusb_phy_unprepare(struct tegra_xusb_phy *phy) +{ + if (phy && phy->ops && phy->ops->unprepare) + return phy->ops->unprepare(phy); + + return phy ? -ENOSYS : -EINVAL; +} + +void tegra_xusb_padctl_init(const void *fdt) +{ + int count, nodes[1]; + + debug("> %s(fdt=%p)\n", __func__, fdt); + + count = fdtdec_find_aliases_for_id(fdt, "padctl", + COMPAT_NVIDIA_TEGRA210_XUSB_PADCTL, + nodes, ARRAY_SIZE(nodes)); + if (process_nodes(fdt, nodes, count)) + return; + + count = fdtdec_find_aliases_for_id(fdt, "padctl", + COMPAT_NVIDIA_TEGRA124_XUSB_PADCTL, + nodes, ARRAY_SIZE(nodes)); + if (process_nodes(fdt, nodes, count)) + return; + + debug("< %s()\n", __func__); +} diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index feda49e..7b49ad3 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -10,13 +10,17 @@ choice prompt "UniPhier SoC select" default MACH_PH1_PRO4 -config MACH_PH1_PRO4 - bool "PH1-Pro4" +config MACH_PH1_SLD3 + bool "PH1-sLD3" select UNIPHIER_SMP config MACH_PH1_LD4 bool "PH1-LD4" +config MACH_PH1_PRO4 + bool "PH1-Pro4" + select UNIPHIER_SMP + config MACH_PH1_SLD8 bool "PH1-sLD8" @@ -64,11 +68,11 @@ choice config DDR_FREQ_1600 bool "DDR3 1600" - depends on MACH_PH1_PRO4 || MACH_PH1_LD4 + depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_PRO4 config DDR_FREQ_1333 bool "DDR3 1333" - depends on MACH_PH1_LD4 || MACH_PH1_SLD8 + depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_SLD8 endchoice diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 24591d6..103db6d 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -32,6 +32,7 @@ obj-y += timer.o obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o -obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ -obj-$(CONFIG_MACH_PH1_PRO4) += ph1-pro4/ -obj-$(CONFIG_MACH_PH1_SLD8) += ph1-sld8/ +obj-$(CONFIG_MACH_PH1_SLD3) += ph1-sld3/ +obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ +obj-$(CONFIG_MACH_PH1_PRO4) += ph1-pro4/ +obj-$(CONFIG_MACH_PH1_SLD8) += ph1-sld8/ diff --git a/arch/arm/mach-uniphier/include/mach/sc-regs.h b/arch/arm/mach-uniphier/include/mach/sc-regs.h index 20878e2..df50294 100644 --- a/arch/arm/mach-uniphier/include/mach/sc-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sc-regs.h @@ -1,7 +1,7 @@ /* * UniPhier SC (System Control) block registers * - * Copyright (C) 2011-2015 Panasonic Corporation + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,7 +9,11 @@ #ifndef ARCH_SC_REGS_H #define ARCH_SC_REGS_H +#if defined(CONFIG_MACH_PH1_SLD3) +#define SC_BASE_ADDR 0xf1840000 +#else #define SC_BASE_ADDR 0x61840000 +#endif #define SC_DPLLCTRL (SC_BASE_ADDR | 0x1200) #define SC_DPLLCTRL_SSC_EN (0x1 << 31) diff --git a/arch/arm/mach-uniphier/include/mach/sg-regs.h b/arch/arm/mach-uniphier/include/mach/sg-regs.h index a65f058..43a6c35 100644 --- a/arch/arm/mach-uniphier/include/mach/sg-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sg-regs.h @@ -55,11 +55,12 @@ #if defined(CONFIG_MACH_PH1_PRO4) # define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 8) -#elif defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) +#elif defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_LD4) || \ + defined(CONFIG_MACH_PH1_SLD8) # define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 4) #endif -#if defined(CONFIG_MACH_PH1_PRO4) +#if defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_PRO4) #define SG_PINSELBITS 4 #elif defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) #define SG_PINSELBITS 8 diff --git a/arch/arm/mach-uniphier/ph1-sld3/Makefile b/arch/arm/mach-uniphier/ph1-sld3/Makefile new file mode 100644 index 0000000..f3f7ad4 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/Makefile @@ -0,0 +1,16 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o +obj-y += bcu_init.o memconf.o sg_init.o pll_init.o early_clkrst_init.o \ + early_pinctrl.o pll_spectrum.o umc_init.o +obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o +obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o +obj-$(CONFIG_SPL_DM) += platdevice.o +else +obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o +endif + +obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c b/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c new file mode 100644 index 0000000..ccc6897 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/io.h> +#include <mach/bcu-regs.h> + +#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x)) + +void bcu_init(void) +{ + int shift; + + writel(0x11111111, BCSCR2); /* 0x80000000-0x9fffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR3); /* 0xa0000000-0xbfffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR4); /* 0xc0000000-0xdfffffff: IPPC/IPPD-bus */ + /* + * 0xe0000000-0xefffffff: Ex-bus + * 0xf0000000-0xfbffffff: ASM bus + * 0xfc000000-0xffffffff: OCM bus + */ + writel(0x24440000, BCSCR5); + + /* Specify DDR channel */ + shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4; + writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */ + + shift -= 32; + writel(ch(shift), BCIPPCCHR3); /* 0xa0000000-0xbfffffff */ + + shift -= 32; + writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */ +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c b/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c new file mode 100644 index 0000000..40000af --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/io.h> +#include <mach/boot-device.h> +#include <mach/sg-regs.h> +#include <mach/sbc-regs.h> + +struct boot_device_info boot_device_table[] = { + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "External Master"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC (3.3V, Boot Oparation)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC (1.8V, Boot Oparation)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC (3.3V, Normal)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC (1.8V, Normal)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + { /* sentinel */ } +}; + +int get_boot_mode_sel(void) +{ + return readl(SG_PINMON0) & 0x3f; +} + +u32 spl_boot_device(void) +{ + int boot_mode; + + if (boot_is_swapped()) + return BOOT_DEVICE_NOR; + + boot_mode = get_boot_mode_sel(); + + return boot_device_table[boot_mode].type; +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c new file mode 100644 index 0000000..3a3dab7 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c @@ -0,0 +1 @@ +#include "../ph1-pro4/clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c new file mode 100644 index 0000000..d7ef16b --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c @@ -0,0 +1 @@ +#include "../ph1-pro4/early_clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c new file mode 100644 index 0000000..f113e65 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <mach/sg-regs.h> + +void early_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_UNIPHIER_SERIAL + sg_set_pinsel(63, 0); /* RXD0 */ + sg_set_pinsel(64, 1); /* TXD0 */ + + sg_set_pinsel(65, 0); /* RXD1 */ + sg_set_pinsel(66, 1); /* TXD1 */ + + sg_set_pinsel(96, 2); /* RXD2 */ + sg_set_pinsel(102, 2); /* TXD2 */ +#endif +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S new file mode 100644 index 0000000..9d1fd2c --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S @@ -0,0 +1,31 @@ +/* + * On-chip UART initializaion for low-level debugging + * + * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/linkage.h> +#include <mach/bcu-regs.h> +#include <mach/sc-regs.h> +#include <mach/sg-regs.h> +#include <mach/debug-uart.S> + +ENTRY(setup_lowlevel_debug) + ldr r0, =BCSCR5 + ldr r1, =0x24440000 + str r1, [r0] + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + init_debug_uart r0, r1, r2 + + set_pinsel 63, 0, r0, r1 + set_pinsel 64, 1, r0, r1 + + mov pc, lr +ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-sld3/memconf.c b/arch/arm/mach-uniphier/ph1-sld3/memconf.c new file mode 100644 index 0000000..553a9e3 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/memconf.c @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/types.h> +#include <linux/sizes.h> +#include <mach/sg-regs.h> + +static inline u32 sg_memconf_val_ch2(unsigned long size, int num) +{ + int size_mb = size / num; + u32 ret; + + switch (size_mb) { + case SZ_64M: + ret = SG_MEMCONF_CH2_SZ_64M; + break; + case SZ_128M: + ret = SG_MEMCONF_CH2_SZ_128M; + break; + case SZ_256M: + ret = SG_MEMCONF_CH2_SZ_256M; + break; + case SZ_512M: + ret = SG_MEMCONF_CH2_SZ_512M; + break; + default: + BUG(); + break; + } + + switch (num) { + case 1: + ret |= SG_MEMCONF_CH2_NUM_1; + break; + case 2: + ret |= SG_MEMCONF_CH2_NUM_2; + break; + default: + BUG(); + break; + } + return ret; +} + +u32 memconf_additional_val(void) +{ + return sg_memconf_val_ch2(CONFIG_SDRAM2_SIZE, CONFIG_DDR_NUM_CH2); +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c new file mode 100644 index 0000000..5ecbe4c --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <mach/sg-regs.h> + +void pin_init(void) +{ +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(13, 0); /* USB0OC */ + sg_set_pinsel(14, 1); /* USB0VBUS */ + + sg_set_pinsel(15, 0); /* USB1OC */ + sg_set_pinsel(16, 1); /* USB1VBUS */ + + sg_set_pinsel(17, 0); /* USB2OC */ + sg_set_pinsel(18, 1); /* USB2VBUS */ + + sg_set_pinsel(19, 0); /* USB3OC */ + sg_set_pinsel(20, 1); /* USB3VBUS */ +#endif +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/platdevice.c b/arch/arm/mach-uniphier/ph1-sld3/platdevice.c new file mode 100644 index 0000000..6521067 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/platdevice.c @@ -0,0 +1 @@ +#include "../ph1-ld4/platdevice.c" diff --git a/arch/arm/mach-uniphier/ph1-sld3/pll_init.c b/arch/arm/mach-uniphier/ph1-sld3/pll_init.c new file mode 100644 index 0000000..ebd1c31 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/pll_init.c @@ -0,0 +1,10 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +void pll_init(void) +{ + /* add pll init code here */ +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c new file mode 100644 index 0000000..fcf2ad2 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/io.h> +#include <mach/sc-regs.h> + +void enable_dpll_ssc(void) +{ + u32 tmp; + + tmp = readl(SC_DPLLCTRL); + tmp |= SC_DPLLCTRL_SSC_EN; + writel(tmp, SC_DPLLCTRL); +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c new file mode 100644 index 0000000..d66f89e --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/io.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +void sbc_init(void) +{ + /* only address/data multiplex mode is supported */ + + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10); + writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11); + writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12); + + if (boot_is_swapped()) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * + * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank + * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + */ + writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x00000000-0x01ffffff: mask ROM + * 0x02000000-0x03efffff: memory bank (31MB) + * 0x03f00000-0x03ffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); + } + + sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */ +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c new file mode 100644 index 0000000..f5e2446 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/io.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +void sbc_init(void) +{ + /* only address/data multiplex mode is supported */ + + /* XECS0 : boot/sub memory (boot swap = off/on) */ + writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL00); + writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL01); + writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL02); + + /* XECS1 : sub/boot memory (boot swap = off/on) */ + writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10); + writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11); + writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12); + + /* XECS2 : peripherals */ + writel(SBCTRL0_ADMULTIPLX_PERI_VALUE, SBCTRL20); + writel(SBCTRL1_ADMULTIPLX_PERI_VALUE, SBCTRL21); + writel(SBCTRL2_ADMULTIPLX_PERI_VALUE, SBCTRL22); + + /* base address regsiters */ + writel(0x0000bc01, SBBASE0); + writel(0x0400bc01, SBBASE1); + writel(0x0800bf01, SBBASE2); + + sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */ +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/sg_init.c b/arch/arm/mach-uniphier/ph1-sld3/sg_init.c new file mode 100644 index 0000000..ca3cb9c --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/sg_init.c @@ -0,0 +1,9 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +void sg_init(void) +{ +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/umc_init.c b/arch/arm/mach-uniphier/ph1-sld3/umc_init.c new file mode 100644 index 0000000..91ee3de --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/umc_init.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> + +int umc_init(void) +{ + /* add UMC init code here */ + printf("Implement memory init code\n"); + + return 0; +} diff --git a/arch/arm/mach-zynq/clk.c b/arch/arm/mach-zynq/clk.c index d2885dc..6444be8 100644 --- a/arch/arm/mach-zynq/clk.c +++ b/arch/arm/mach-zynq/clk.c @@ -48,11 +48,11 @@ DECLARE_GLOBAL_DATA_PTR; struct clk; /** - * struct clk_ops: + * struct zynq_clk_ops: * @set_rate: Function pointer to set_rate() implementation * @get_rate: Function pointer to get_rate() implementation */ -struct clk_ops { +struct zynq_clk_ops { int (*set_rate)(struct clk *clk, unsigned long rate); unsigned long (*get_rate)(struct clk *clk); }; @@ -72,7 +72,7 @@ struct clk { enum zynq_clk parent; unsigned int flags; u32 *reg; - struct clk_ops ops; + struct zynq_clk_ops ops; }; #define ZYNQ_CLK_FLAGS_HAS_2_DIVS 1 diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 3b3f446..18451d3 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -22,9 +22,11 @@ config MPC8260 config MPC83xx bool "MPC83xx" + select CREATE_ARCH_SYMLINK config MPC85xx bool "MPC85xx" + select CREATE_ARCH_SYMLINK config MPC86xx bool "MPC86xx" @@ -34,6 +36,7 @@ config 8xx config 4xx bool "PPC4xx" + select CREATE_ARCH_SYMLINK endchoice diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index e61d8e0..a70fb71 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -1052,6 +1052,17 @@ create_init_ram_area: CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \ CONFIG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6 + +#elif defined(CONFIG_RAMBOOT_PBL) && defined(CONFIG_SECURE_BOOT) + /* create a temp mapping in AS = 1 for mapping CONFIG_SYS_MONITOR_BASE + * to L3 Address configured by PBL for ISBC code + */ + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \ + CONFIG_SYS_INIT_L3_ADDR & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 + #else /* * create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main diff --git a/arch/powerpc/cpu/mpc85xx/t1024_ids.c b/arch/powerpc/cpu/mpc85xx/t1024_ids.c index 132689b..8a1092e 100644 --- a/arch/powerpc/cpu/mpc85xx/t1024_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t1024_ids.c @@ -51,11 +51,10 @@ int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); #ifdef CONFIG_SYS_DPAA_FMAN struct liodn_id_table fman1_liodn_tbl[] = { - SET_FMAN_RX_1G_LIODN(1, 0, 88), + SET_FMAN_RX_10G_TYPE2_LIODN(1, 0, 88), SET_FMAN_RX_1G_LIODN(1, 1, 89), SET_FMAN_RX_1G_LIODN(1, 2, 90), SET_FMAN_RX_1G_LIODN(1, 3, 91), - SET_FMAN_RX_10G_LIODN(1, 0, 94), }; int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); #endif diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c index 74c4c81..7b43b28 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c @@ -214,8 +214,8 @@ static const struct serdes_config serdes3_cfg_tbl[] = { {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}}, {5, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}}, - {7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} }, - {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE}}, + {7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, + {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}}, {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, @@ -266,37 +266,30 @@ static const struct serdes_config serdes4_cfg_tbl[] = { #elif defined(CONFIG_PPC_T4160) || defined(CONFIG_PPC_T4080) static const struct serdes_config serdes1_cfg_tbl[] = { /* SerDes 1 */ - {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, - XAUI_FM1_MAC9, XAUI_FM1_MAC9, + {1, {NONE, NONE, NONE, NONE, XAUI_FM1_MAC10, XAUI_FM1_MAC10, XAUI_FM1_MAC10, XAUI_FM1_MAC10} }, - {2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, - HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + {2, {NONE, NONE, NONE, NONE, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} }, - {4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, - HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + {4, {NONE, NONE, NONE, NONE, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} }, - {27, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, - SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + {27, {NONE, NONE, NONE, NONE, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, - {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, - SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + {28, {NONE, NONE, NONE, NONE, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, - {35, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, - SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + {35, {NONE, NONE, NONE, NONE, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, - {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, - SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + {36, {NONE, NONE, NONE, NONE, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, - {37, {NONE, NONE, QSGMII_FM1_B, NONE, + {37, {NONE, NONE, NONE, NONE, NONE, NONE, QSGMII_FM1_A, NONE} }, - {38, {NONE, NONE, QSGMII_FM1_B, NONE, + {38, {NONE, NONE, NONE, NONE, NONE, NONE, QSGMII_FM1_A, NONE} }, {} }; @@ -363,45 +356,45 @@ static const struct serdes_config serdes2_cfg_tbl[] = { SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {37, {NONE, NONE, QSGMII_FM2_B, NONE, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {38, {NONE, NONE, QSGMII_FM2_B, NONE, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {39, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {45, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {47, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {49, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, - NONE, NONE, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, - NONE, NONE, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {51, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, - NONE, NONE, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, - NONE, NONE, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {53, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, - NONE, NONE, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, - NONE, NONE, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {55, {NONE, XFI_FM1_MAC10, XFI_FM2_MAC10, NONE, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, @@ -424,51 +417,51 @@ static const struct serdes_config serdes3_cfg_tbl[] = { {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} }, {5, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, - {7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} }, - {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} }, + {7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, + {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} }, {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} }, - {11, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + {11, {NONE, NONE, NONE, NONE, PCIE2, PCIE2, PCIE2, PCIE2} }, - {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + {12, {NONE, NONE, NONE, NONE, PCIE2, PCIE2, PCIE2, PCIE2} }, {13, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, PCIE2, PCIE2, PCIE2, PCIE2} }, {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, PCIE2, PCIE2, PCIE2, PCIE2} }, - {15, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + {15, {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1} }, - {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + {16, {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1} }, - {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + {17, {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1} }, {18, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, SRIO1, SRIO1, SRIO1, SRIO1} }, {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, SRIO1, SRIO1, SRIO1, SRIO1} }, {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, - NONE, NONE, NONE, NONE} }, + SRIO1, SRIO1, SRIO1, SRIO1} }, {} }; static const struct serdes_config serdes4_cfg_tbl[] = { /* SerDes 4 */ - {3, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4} }, - {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4} }, - {5, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, - {6, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, - {7, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, - {8, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, - {9, {PCIE3, PCIE3, PCIE3, PCIE3, SATA1, SATA1, SATA2, SATA2} }, - {10, {PCIE3, PCIE3, PCIE3, PCIE3, SATA1, SATA1, SATA2, SATA2} }, - {11, {AURORA, AURORA, AURORA, AURORA, SATA1, SATA1, SATA2, SATA2} }, - {12, {AURORA, AURORA, AURORA, AURORA, SATA1, SATA1, SATA2, SATA2} }, - {13, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, - {14, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, - {15, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, - {16, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, - {18, {AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA} }, + {3, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, PCIE4, PCIE4} }, + {4, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, PCIE4, PCIE4} }, + {5, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} }, + {6, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} }, + {7, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} }, + {8, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} }, + {9, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, SATA1, SATA2} }, + {10, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, SATA1, SATA2} }, + {11, {NONE, NONE, NONE, NONE, AURORA, AURORA, SATA1, SATA2} }, + {12, {NONE, NONE, NONE, NONE, AURORA, AURORA, SATA1, SATA2} }, + {13, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} }, + {14, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} }, + {15, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} }, + {16, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} }, + {18, {NONE, NONE, NONE, NONE, AURORA, AURORA, AURORA, AURORA} }, {} } ; diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 9d56bc1..7a5487b 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -334,7 +334,7 @@ #elif defined(CONFIG_P1025) #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_NUM_LAWS 12 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_PPC_E500_DEBUG_TLB 2 #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM @@ -806,6 +806,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28 +#define CONFIG_SYS_FSL_SFP_VER_3_0 #elif defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023) ||\ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013) diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index 811f034..6206bee 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -145,6 +145,12 @@ extern void fdt_fixup_liodn(void *blob); FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 16), \ CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_10G_OFFSET) \ +/* enetNum is 0, 1, 2... so we + 8 for type-2 10g to get to HW Port ID */ +#define SET_FMAN_RX_10G_TYPE2_LIODN(fmNum, enetNum, liodn) \ + SET_LIODN_ENTRY_1("fsl,fman-port-10g-rx", liodn, \ + FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 8), \ + CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_1G_OFFSET) \ + /* * handle both old and new versioned SEC properties: * "fsl,secX.Y" became "fsl,sec-vX.Y" during development diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index 8f794ef..d57bb55 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -37,7 +37,9 @@ defined(CONFIG_T2080QDS) || \ defined(CONFIG_T2080RDB) || \ defined(CONFIG_T1040QDS) || \ + defined(CONFIG_T104xD4QDS) || \ defined(CONFIG_T104xRDB) || \ + defined(CONFIG_T104xD4RDB) || \ defined(CONFIG_PPC_T1023) || \ defined(CONFIG_PPC_T1024) #define CONFIG_SYS_CPC_REINIT_F @@ -46,6 +48,11 @@ #define CONFIG_SYS_INIT_L3_ADDR 0xbff00000 #endif +#if defined(CONFIG_RAMBOOT_PBL) +#undef CONFIG_SYS_INIT_L3_ADDR +#define CONFIG_SYS_INIT_L3_ADDR 0xbff00000 +#endif + #if defined(CONFIG_C29XPCIE) #define CONFIG_KEY_REVOCATION #endif @@ -68,6 +75,18 @@ #endif #ifndef CONFIG_FIT_SIGNATURE +/* If Boot Script is not on NOR and is required to be copied on RAM */ +#ifdef CONFIG_BOOTSCRIPT_COPY_RAM +#define CONFIG_BS_HDR_ADDR_RAM 0x00010000 +#define CONFIG_BS_HDR_ADDR_FLASH 0x00800000 +#define CONFIG_BS_HDR_SIZE 0x00002000 +#define CONFIG_BS_ADDR_RAM 0x00012000 +#define CONFIG_BS_ADDR_FLASH 0x00802000 +#define CONFIG_BS_SIZE 0x00001000 + +#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM +#else + /* The bootscript header address is different for B4860 because the NOR * mapping is different on B4 due to reduced NOR size. */ @@ -83,6 +102,8 @@ #define CONFIG_BOOTSCRIPT_HDR_ADDR 0xee020000 #endif +#endif + #include <config_fsl_secboot.h> #endif diff --git a/arch/sandbox/cpu/cpu.c b/arch/sandbox/cpu/cpu.c index e6ddb17..3a7f5a0 100644 --- a/arch/sandbox/cpu/cpu.c +++ b/arch/sandbox/cpu/cpu.c @@ -20,7 +20,7 @@ static struct udevice *map_dev; unsigned long map_len; #endif -void reset_cpu(ulong ignored) +void sandbox_exit(void) { /* Do this here while it still has an effect */ os_fd_restore(); @@ -34,13 +34,6 @@ void reset_cpu(ulong ignored) os_exit(0); } -int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - reset_cpu(0); - - return 0; -} - /* delay x useconds */ void __udelay(unsigned long usec) { diff --git a/arch/sandbox/cpu/state.c b/arch/sandbox/cpu/state.c index cae731c..7e5d03e 100644 --- a/arch/sandbox/cpu/state.c +++ b/arch/sandbox/cpu/state.c @@ -345,6 +345,10 @@ int state_init(void) state->ram_buf = os_malloc(state->ram_size); assert(state->ram_buf); + /* No reset yet, so mark it as such. Always allow power reset */ + state->last_reset = RESET_COUNT; + state->reset_allowed[RESET_POWER] = true; + /* * Example of how to use GPIOs: * diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index c25614a..c948df8 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -4,7 +4,7 @@ model = "sandbox"; compatible = "sandbox"; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; aliases { console = &uart0; @@ -28,7 +28,7 @@ }; a-test { - reg = <0>; + reg = <0 1>; compatible = "denx,u-boot-fdt-test"; ping-expect = <0>; ping-add = <0>; @@ -41,16 +41,16 @@ }; junk { - reg = <1>; + reg = <1 1>; compatible = "not,compatible"; }; no-compatible { - reg = <2>; + reg = <2 1>; }; b-test { - reg = <3>; + reg = <3 1>; compatible = "denx,u-boot-fdt-test"; ping-expect = <3>; ping-add = <3>; @@ -60,7 +60,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "denx,u-boot-test-bus"; - reg = <3>; + reg = <3 1>; ping-expect = <4>; ping-add = <4>; c-test@5 { @@ -84,14 +84,14 @@ }; d-test { - reg = <3>; + reg = <3 1>; ping-expect = <6>; ping-add = <6>; compatible = "google,another-fdt-test"; }; e-test { - reg = <3>; + reg = <3 1>; ping-expect = <6>; ping-add = <6>; compatible = "google,another-fdt-test"; @@ -105,6 +105,10 @@ compatible = "denx,u-boot-fdt-test"; }; + clk@0 { + compatible = "sandbox,clk"; + }; + eth@10002000 { compatible = "sandbox,eth"; reg = <0x10002000 0x1000>; @@ -142,7 +146,7 @@ i2c@0 { #address-cells = <1>; #size-cells = <0>; - reg = <0>; + reg = <0 1>; compatible = "sandbox,i2c"; clock-frequency = <100000>; eeprom@2c { @@ -176,6 +180,24 @@ }; }; + leds { + compatible = "gpio-leds"; + + iracibble { + gpios = <&gpio_a 1 0>; + label = "sandbox:red"; + }; + + martinet { + gpios = <&gpio_a 2 0>; + label = "sandbox:green"; + }; + }; + + mmc { + compatible = "sandbox,mmc"; + }; + pci: pci-controller { compatible = "sandbox,pci"; device_type = "pci"; @@ -192,10 +214,22 @@ }; }; + ram { + compatible = "sandbox,ram"; + }; + + reset@0 { + compatible = "sandbox,warm-reset"; + }; + + reset@1 { + compatible = "sandbox,reset"; + }; + spi@0 { #address-cells = <1>; #size-cells = <0>; - reg = <0>; + reg = <0 1>; compatible = "sandbox,spi"; cs-gpios = <0>, <&gpio_a 0>; spi.bin@0 { @@ -206,6 +240,19 @@ }; }; + syscon@0 { + compatible = "sandbox,syscon0"; + reg = <0x10 4>; + }; + + syscon@1 { + compatible = "sandbox,syscon1"; + reg = <0x20 5 + 0x28 6 + 0x30 7 + 0x38 8>; + }; + uart0: serial { compatible = "sandbox,serial"; u-boot,dm-pre-reloc; diff --git a/arch/sandbox/include/asm/state.h b/arch/sandbox/include/asm/state.h index a57480a..2bd28f6 100644 --- a/arch/sandbox/include/asm/state.h +++ b/arch/sandbox/include/asm/state.h @@ -7,6 +7,7 @@ #define __SANDBOX_STATE_H #include <config.h> +#include <reset.h> #include <stdbool.h> #include <linux/stringify.h> @@ -59,6 +60,8 @@ struct sandbox_state { bool write_state; /* Write sandbox state on exit */ bool ignore_missing_state_on_read; /* No error if state missing */ bool show_lcd; /* Show LCD on start-up */ + enum reset_t last_reset; /* Last reset type */ + bool reset_allowed[RESET_COUNT]; /* Allowed reset types */ enum state_terminal_raw term_raw; /* Terminal raw/cooked */ /* Pointer to information for each SPI bus/cs */ diff --git a/arch/sandbox/include/asm/test.h b/arch/sandbox/include/asm/test.h index 91a5c79..d3c7851 100644 --- a/arch/sandbox/include/asm/test.h +++ b/arch/sandbox/include/asm/test.h @@ -17,6 +17,25 @@ #define SANDBOX_PCI_CLASS_CODE PCI_CLASS_CODE_COMM #define SANDBOX_PCI_CLASS_SUB_CODE PCI_CLASS_SUB_CODE_COMM_SERIAL +#define SANDBOX_CLK_RATE 32768 + +enum { + PERIPH_ID_FIRST = 0, + PERIPH_ID_SPI = PERIPH_ID_FIRST, + PERIPH_ID_I2C, + PERIPH_ID_PCI, + + PERIPH_ID_COUNT, +}; + +/* System controller driver data */ +enum { + SYSCON0 = 32, + SYSCON1, + + SYSCON_COUNT +}; + /** * sandbox_i2c_set_test_mode() - set test mode for running unit tests * diff --git a/arch/sandbox/include/asm/u-boot-sandbox.h b/arch/sandbox/include/asm/u-boot-sandbox.h index da87cc3..2f3c3f9 100644 --- a/arch/sandbox/include/asm/u-boot-sandbox.h +++ b/arch/sandbox/include/asm/u-boot-sandbox.h @@ -83,4 +83,7 @@ void sandbox_set_enable_pci_map(int enable); */ int sandbox_read_fdt_from_file(void); +/* Exit sandbox (quit U-Boot) */ +void sandbox_exit(void); + #endif /* _U_BOOT_SANDBOX_H_ */ diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cbbaa4f..e8968a7 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -369,4 +369,14 @@ config PCIE_ECAM_BASE assigned to PCI devices - i.e. the memory and prefetch regions, as passed to pci_set_region(). +config PCIE_ECAM_SIZE + hex + default 0x10000000 + help + This is the size of memory-mapped address of PCI configuration space, + which is only available through the Enhanced Configuration Access + Mechanism (ECAM) with PCI Express. Each bus consumes 1 MiB memory, + so a default 0x10000000 size covers all of the 256 buses which is the + maximum number of PCI buses as defined by the PCI specification. + endmenu diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index af927b9..b9134cf 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -363,13 +363,26 @@ int x86_cpu_init_f(void) mtrr_cap = native_read_msr(MTRR_CAP_MSR); if (mtrr_cap & MTRR_CAP_FIX) { /* Mark the VGA RAM area as uncacheable */ - native_write_msr(MTRR_FIX_16K_A0000_MSR, 0, 0); - - /* Mark the PCI ROM area as uncacheable */ - native_write_msr(MTRR_FIX_4K_C0000_MSR, 0, 0); - native_write_msr(MTRR_FIX_4K_C8000_MSR, 0, 0); - native_write_msr(MTRR_FIX_4K_D0000_MSR, 0, 0); - native_write_msr(MTRR_FIX_4K_D8000_MSR, 0, 0); + native_write_msr(MTRR_FIX_16K_A0000_MSR, + MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE), + MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE)); + + /* + * Mark the PCI ROM area as cacheable to improve ROM + * execution performance. + */ + native_write_msr(MTRR_FIX_4K_C0000_MSR, + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK), + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); + native_write_msr(MTRR_FIX_4K_C8000_MSR, + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK), + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); + native_write_msr(MTRR_FIX_4K_D0000_MSR, + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK), + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); + native_write_msr(MTRR_FIX_4K_D8000_MSR, + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK), + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); /* Enable the fixed range MTRRs */ msr_setbits_64(MTRR_DEF_TYPE_MSR, MTRR_DEF_TYPE_FIX_EN); @@ -683,6 +696,15 @@ __weak int x86_init_cpus(void) #ifdef CONFIG_SMP debug("Init additional CPUs\n"); x86_mp_init(); +#else + struct udevice *dev; + + /* + * This causes the cpu-x86 driver to be probed. + * We don't check return value here as we want to allow boards + * which have not been converted to use cpu uclass driver to boot. + */ + uclass_first_device(UCLASS_CPU, &dev); #endif return 0; diff --git a/arch/x86/cpu/interrupts.c b/arch/x86/cpu/interrupts.c index c777d36..853c82f 100644 --- a/arch/x86/cpu/interrupts.c +++ b/arch/x86/cpu/interrupts.c @@ -32,14 +32,76 @@ DECLARE_GLOBAL_DATA_PTR; "pushl $"#x"\n" \ "jmp irq_common_entry\n" +static char *exceptions[] = { + "Divide Error", + "Debug", + "NMI Interrupt", + "Breakpoint", + "Overflow", + "BOUND Range Exceeded", + "Invalid Opcode (Undefined Opcode)", + "Device Not Avaiable (No Math Coprocessor)", + "Double Fault", + "Coprocessor Segment Overrun", + "Invalid TSS", + "Segment Not Present", + "Stack Segment Fault", + "Gerneral Protection", + "Page Fault", + "Reserved", + "x87 FPU Floating-Point Error", + "Alignment Check", + "Machine Check", + "SIMD Floating-Point Exception", + "Virtualization Exception", + "Reserved", + "Reserved", + "Reserved", + "Reserved", + "Reserved", + "Reserved", + "Reserved", + "Reserved", + "Reserved", + "Reserved", + "Reserved" +}; + static void dump_regs(struct irq_regs *regs) { + unsigned long cs, eip, eflags; unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L; unsigned long d0, d1, d2, d3, d6, d7; unsigned long sp; + /* + * Some exceptions cause an error code to be saved on the current stack + * after the EIP value. We should extract CS/EIP/EFLAGS from different + * position on the stack based on the exception number. + */ + switch (regs->irq_id) { + case EXC_DF: + case EXC_TS: + case EXC_NP: + case EXC_SS: + case EXC_GP: + case EXC_PF: + case EXC_AC: + cs = regs->context.ctx2.xcs; + eip = regs->context.ctx2.eip; + eflags = regs->context.ctx2.eflags; + /* We should fix up the ESP due to error code */ + regs->esp += 4; + break; + default: + cs = regs->context.ctx1.xcs; + eip = regs->context.ctx1.eip; + eflags = regs->context.ctx1.eflags; + break; + } + printf("EIP: %04x:[<%08lx>] EFLAGS: %08lx\n", - (u16)regs->xcs, regs->eip, regs->eflags); + (u16)cs, eip, eflags); printf("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n", regs->eax, regs->ebx, regs->ecx, regs->edx); @@ -85,6 +147,13 @@ static void dump_regs(struct irq_regs *regs) } } +static void do_exception(struct irq_regs *regs) +{ + printf("%s\n", exceptions[regs->irq_id]); + dump_regs(regs); + hang(); +} + struct idt_entry { u16 base_low; u16 selector; @@ -201,111 +270,10 @@ void irq_llsr(struct irq_regs *regs) * Order Number: 253665-029US, November 2008 * Table 6-1. Exceptions and Interrupts */ - switch (regs->irq_id) { - case 0x00: - printf("Divide Error (Division by zero)\n"); - dump_regs(regs); - hang(); - break; - case 0x01: - printf("Debug Interrupt (Single step)\n"); - dump_regs(regs); - break; - case 0x02: - printf("NMI Interrupt\n"); - dump_regs(regs); - break; - case 0x03: - printf("Breakpoint\n"); - dump_regs(regs); - break; - case 0x04: - printf("Overflow\n"); - dump_regs(regs); - hang(); - break; - case 0x05: - printf("BOUND Range Exceeded\n"); - dump_regs(regs); - hang(); - break; - case 0x06: - printf("Invalid Opcode (UnDefined Opcode)\n"); - dump_regs(regs); - hang(); - break; - case 0x07: - printf("Device Not Available (No Math Coprocessor)\n"); - dump_regs(regs); - hang(); - break; - case 0x08: - printf("Double fault\n"); - dump_regs(regs); - hang(); - break; - case 0x09: - printf("Co-processor segment overrun\n"); - dump_regs(regs); - hang(); - break; - case 0x0a: - printf("Invalid TSS\n"); - dump_regs(regs); - break; - case 0x0b: - printf("Segment Not Present\n"); - dump_regs(regs); - hang(); - break; - case 0x0c: - printf("Stack Segment Fault\n"); - dump_regs(regs); - hang(); - break; - case 0x0d: - printf("General Protection\n"); - dump_regs(regs); - break; - case 0x0e: - printf("Page fault\n"); - dump_regs(regs); - hang(); - break; - case 0x0f: - printf("Floating-Point Error (Math Fault)\n"); - dump_regs(regs); - break; - case 0x10: - printf("Alignment check\n"); - dump_regs(regs); - break; - case 0x11: - printf("Machine Check\n"); - dump_regs(regs); - break; - case 0x12: - printf("SIMD Floating-Point Exception\n"); - dump_regs(regs); - break; - case 0x13: - case 0x14: - case 0x15: - case 0x16: - case 0x17: - case 0x18: - case 0x19: - case 0x1a: - case 0x1b: - case 0x1c: - case 0x1d: - case 0x1e: - case 0x1f: - printf("Reserved Exception\n"); - dump_regs(regs); - break; - - default: + if (regs->irq_id < 32) { + /* Architecture defined exception */ + do_exception(regs); + } else { /* Hardware or User IRQ */ do_irq(regs->irq_id); } diff --git a/arch/x86/cpu/ivybridge/gma.c b/arch/x86/cpu/ivybridge/gma.c index ea169b0..89d4a5e 100644 --- a/arch/x86/cpu/ivybridge/gma.c +++ b/arch/x86/cpu/ivybridge/gma.c @@ -16,7 +16,6 @@ #include <asm/pci.h> #include <asm/arch/pch.h> #include <asm/arch/sandybridge.h> -#include <linux/kconfig.h> struct gt_powermeter { u16 reg; diff --git a/arch/x86/cpu/ivybridge/lpc.c b/arch/x86/cpu/ivybridge/lpc.c index bc1a0f0..3efd3e8 100644 --- a/arch/x86/cpu/ivybridge/lpc.c +++ b/arch/x86/cpu/ivybridge/lpc.c @@ -252,7 +252,6 @@ static void pch_rtc_init(pci_dev_t dev) /* TODO: Handle power failure */ if (rtc_failed) printf("RTC power failed\n"); - rtc_init(); } /* CougarPoint PCH Power Management init */ diff --git a/arch/x86/cpu/ivybridge/sdram.c b/arch/x86/cpu/ivybridge/sdram.c index af907c5..7f3b13d 100644 --- a/arch/x86/cpu/ivybridge/sdram.c +++ b/arch/x86/cpu/ivybridge/sdram.c @@ -128,6 +128,14 @@ static int get_mrc_entry(struct udevice **devp, struct fmap_entry *entry) static int read_seed_from_cmos(struct pei_data *pei_data) { u16 c1, c2, checksum, seed_checksum; + struct udevice *dev; + int rcode = 0; + + rcode = uclass_get_device(UCLASS_RTC, 0, &dev); + if (rcode) { + debug("Cannot find RTC: err=%d\n", rcode); + return -ENODEV; + } /* * Read scrambler seeds from CMOS RAM. We don't want to store them in @@ -135,11 +143,11 @@ static int read_seed_from_cmos(struct pei_data *pei_data) * the flash too much. So we store these in CMOS and the large MRC * data in SPI flash. */ - pei_data->scrambler_seed = rtc_read32(CMOS_OFFSET_MRC_SEED); + rtc_read32(dev, CMOS_OFFSET_MRC_SEED, &pei_data->scrambler_seed); debug("Read scrambler seed 0x%08x from CMOS 0x%02x\n", pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED); - pei_data->scrambler_seed_s3 = rtc_read32(CMOS_OFFSET_MRC_SEED_S3); + rtc_read32(dev, CMOS_OFFSET_MRC_SEED_S3, &pei_data->scrambler_seed_s3); debug("Read S3 scrambler seed 0x%08x from CMOS 0x%02x\n", pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3); @@ -150,8 +158,8 @@ static int read_seed_from_cmos(struct pei_data *pei_data) sizeof(u32)); checksum = add_ip_checksums(sizeof(u32), c1, c2); - seed_checksum = rtc_read8(CMOS_OFFSET_MRC_SEED_CHK); - seed_checksum |= rtc_read8(CMOS_OFFSET_MRC_SEED_CHK + 1) << 8; + seed_checksum = rtc_read8(dev, CMOS_OFFSET_MRC_SEED_CHK); + seed_checksum |= rtc_read8(dev, CMOS_OFFSET_MRC_SEED_CHK + 1) << 8; if (checksum != seed_checksum) { debug("%s: invalid seed checksum\n", __func__); @@ -223,13 +231,21 @@ static int build_mrc_data(struct mrc_data_container **datap) static int write_seeds_to_cmos(struct pei_data *pei_data) { u16 c1, c2, checksum; + struct udevice *dev; + int rcode = 0; + + rcode = uclass_get_device(UCLASS_RTC, 0, &dev); + if (rcode) { + debug("Cannot find RTC: err=%d\n", rcode); + return -ENODEV; + } /* Save the MRC seed values to CMOS */ - rtc_write32(CMOS_OFFSET_MRC_SEED, pei_data->scrambler_seed); + rtc_write32(dev, CMOS_OFFSET_MRC_SEED, pei_data->scrambler_seed); debug("Save scrambler seed 0x%08x to CMOS 0x%02x\n", pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED); - rtc_write32(CMOS_OFFSET_MRC_SEED_S3, pei_data->scrambler_seed_s3); + rtc_write32(dev, CMOS_OFFSET_MRC_SEED_S3, pei_data->scrambler_seed_s3); debug("Save s3 scrambler seed 0x%08x to CMOS 0x%02x\n", pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3); @@ -240,8 +256,8 @@ static int write_seeds_to_cmos(struct pei_data *pei_data) sizeof(u32)); checksum = add_ip_checksums(sizeof(u32), c1, c2); - rtc_write8(CMOS_OFFSET_MRC_SEED_CHK, checksum & 0xff); - rtc_write8(CMOS_OFFSET_MRC_SEED_CHK + 1, (checksum >> 8) & 0xff); + rtc_write8(dev, CMOS_OFFSET_MRC_SEED_CHK, checksum & 0xff); + rtc_write8(dev, CMOS_OFFSET_MRC_SEED_CHK + 1, (checksum >> 8) & 0xff); return 0; } diff --git a/arch/x86/cpu/pci.c b/arch/x86/cpu/pci.c index c209f15..f8da080 100644 --- a/arch/x86/cpu/pci.c +++ b/arch/x86/cpu/pci.c @@ -152,23 +152,32 @@ int pci_x86_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, return 0; } -void pci_assign_irqs(int bus, int device, int func, u8 irq[4]) +void pci_assign_irqs(int bus, int device, u8 irq[4]) { pci_dev_t bdf; + int func; + u16 vendor; u8 pin, line; - bdf = PCI_BDF(bus, device, func); + for (func = 0; func < 8; func++) { + bdf = PCI_BDF(bus, device, func); + vendor = x86_pci_read_config16(bdf, PCI_VENDOR_ID); + if (vendor == 0xffff || vendor == 0x0000) + continue; - pin = x86_pci_read_config8(bdf, PCI_INTERRUPT_PIN); + pin = x86_pci_read_config8(bdf, PCI_INTERRUPT_PIN); - /* PCI spec says all values except 1..4 are reserved */ - if ((pin < 1) || (pin > 4)) - return; + /* PCI spec says all values except 1..4 are reserved */ + if ((pin < 1) || (pin > 4)) + continue; - line = irq[pin - 1]; + line = irq[pin - 1]; + if (!line) + continue; - debug("Assigning IRQ %d to PCI device %d.%x.%d (INT%c)\n", - line, bus, device, func, 'A' + pin - 1); + debug("Assigning IRQ %d to PCI device %d.%x.%d (INT%c)\n", + line, bus, device, func, 'A' + pin - 1); - x86_pci_write_config8(bdf, PCI_INTERRUPT_LINE, line); + x86_pci_write_config8(bdf, PCI_INTERRUPT_LINE, line); + } } diff --git a/arch/x86/cpu/qemu/pci.c b/arch/x86/cpu/qemu/pci.c index 1a9140b..2e94456 100644 --- a/arch/x86/cpu/qemu/pci.c +++ b/arch/x86/cpu/qemu/pci.c @@ -13,6 +13,8 @@ DECLARE_GLOBAL_DATA_PTR; +static bool i440fx; + void board_pci_setup_hose(struct pci_controller *hose) { hose->first_busno = 0; @@ -50,7 +52,7 @@ void board_pci_setup_hose(struct pci_controller *hose) int board_pci_post_scan(struct pci_controller *hose) { int ret = 0; - u16 device; + u16 device, xbcs; int pam, i; pci_dev_t vga; ulong start; @@ -61,7 +63,8 @@ int board_pci_post_scan(struct pci_controller *hose) * PCI device ID. */ device = x86_pci_read_config16(PCI_BDF(0, 0, 0), PCI_DEVICE_ID); - pam = (device == PCI_DEVICE_ID_INTEL_82441) ? I440FX_PAM : Q35_PAM; + i440fx = (device == PCI_DEVICE_ID_INTEL_82441); + pam = i440fx ? I440FX_PAM : Q35_PAM; /* * Initialize Programmable Attribute Map (PAM) Registers @@ -71,7 +74,7 @@ int board_pci_post_scan(struct pci_controller *hose) for (i = 0; i < PAM_NUM; i++) x86_pci_write_config8(PCI_BDF(0, 0, 0), pam + i, PAM_RW); - if (device == PCI_DEVICE_ID_INTEL_82441) { + if (i440fx) { /* * Enable legacy IDE I/O ports decode * @@ -82,6 +85,15 @@ int board_pci_post_scan(struct pci_controller *hose) */ x86_pci_write_config16(PIIX_IDE, IDE0_TIM, IDE_DECODE_EN); x86_pci_write_config16(PIIX_IDE, IDE1_TIM, IDE_DECODE_EN); + + /* Enable I/O APIC */ + xbcs = x86_pci_read_config16(PIIX_ISA, XBCS); + xbcs |= APIC_EN; + x86_pci_write_config16(PIIX_ISA, XBCS, xbcs); + } else { + /* Configure PCIe ECAM base address */ + x86_pci_write_config32(PCI_BDF(0, 0, 0), PCIEX_BAR, + CONFIG_PCIE_ECAM_BASE | BAR_EN); } /* @@ -92,10 +104,35 @@ int board_pci_post_scan(struct pci_controller *hose) * board, it shows as device 2, while for Q35 and ICH9 chipset board, * it shows as device 1. */ - vga = (device == PCI_DEVICE_ID_INTEL_82441) ? I440FX_VGA : Q35_VGA; + vga = i440fx ? I440FX_VGA : Q35_VGA; start = get_timer(0); ret = pci_run_vga_bios(vga, NULL, PCI_ROM_USE_NATIVE); debug("BIOS ran in %lums\n", get_timer(start)); return ret; } + +#ifdef CONFIG_GENERATE_MP_TABLE +int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq) +{ + u8 irq; + + if (i440fx) { + /* + * Not like most x86 platforms, the PIRQ[A-D] on PIIX3 are not + * connected to I/O APIC INTPIN#16-19. Instead they are routed + * to an irq number controled by the PIRQ routing register. + */ + irq = x86_pci_read_config8(PCI_BDF(bus, dev, func), + PCI_INTERRUPT_LINE); + } else { + /* + * ICH9's PIRQ[A-H] are not consecutive numbers from 0 to 7. + * PIRQ[A-D] still maps to [0-3] but PIRQ[E-H] maps to [8-11]. + */ + irq = pirq < 8 ? pirq + 16 : pirq + 12; + } + + return irq; +} +#endif diff --git a/arch/x86/cpu/queensbay/Makefile b/arch/x86/cpu/queensbay/Makefile index d8761fd..660f967 100644 --- a/arch/x86/cpu/queensbay/Makefile +++ b/arch/x86/cpu/queensbay/Makefile @@ -6,4 +6,3 @@ obj-y += fsp_configs.o obj-y += tnc.o topcliff.o -obj-$(CONFIG_PCI) += tnc_pci.o diff --git a/arch/x86/cpu/queensbay/tnc.c b/arch/x86/cpu/queensbay/tnc.c index d27b2d9..de50893 100644 --- a/arch/x86/cpu/queensbay/tnc.c +++ b/arch/x86/cpu/queensbay/tnc.c @@ -25,7 +25,6 @@ static void unprotect_spi_flash(void) int arch_cpu_init(void) { - struct pci_controller *hose; int ret; post_code(POST_CPU_INIT); @@ -37,10 +36,6 @@ int arch_cpu_init(void) if (ret) return ret; - ret = pci_early_init_hose(&hose); - if (ret) - return ret; - unprotect_spi_flash(); return 0; diff --git a/arch/x86/cpu/queensbay/tnc_pci.c b/arch/x86/cpu/queensbay/tnc_pci.c deleted file mode 100644 index 6c291f9..0000000 --- a/arch/x86/cpu/queensbay/tnc_pci.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <pci.h> -#include <asm/pci.h> -#include <asm/fsp/fsp_support.h> - -DECLARE_GLOBAL_DATA_PTR; - -void board_pci_setup_hose(struct pci_controller *hose) -{ - hose->first_busno = 0; - hose->last_busno = 0; - - /* PCI memory space */ - pci_set_region(hose->regions + 0, - CONFIG_PCI_MEM_BUS, - CONFIG_PCI_MEM_PHYS, - CONFIG_PCI_MEM_SIZE, - PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose->regions + 1, - CONFIG_PCI_IO_BUS, - CONFIG_PCI_IO_PHYS, - CONFIG_PCI_IO_SIZE, - PCI_REGION_IO); - - pci_set_region(hose->regions + 2, - CONFIG_PCI_PREF_BUS, - CONFIG_PCI_PREF_PHYS, - CONFIG_PCI_PREF_SIZE, - PCI_REGION_PREFETCH); - - pci_set_region(hose->regions + 3, - 0, - 0, - gd->ram_size, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - hose->region_count = 4; -} diff --git a/arch/x86/dts/chromebook_link.dts b/arch/x86/dts/chromebook_link.dts index 7c7034c..ad390bf 100644 --- a/arch/x86/dts/chromebook_link.dts +++ b/arch/x86/dts/chromebook_link.dts @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" /include/ "serial.dtsi" +/include/ "rtc.dtsi" / { model = "Google Link"; diff --git a/arch/x86/dts/chromebox_panther.dts b/arch/x86/dts/chromebox_panther.dts index 4eccefd..84eae3a 100644 --- a/arch/x86/dts/chromebox_panther.dts +++ b/arch/x86/dts/chromebox_panther.dts @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" /include/ "serial.dtsi" +/include/ "rtc.dtsi" / { model = "Google Panther"; diff --git a/arch/x86/dts/crownbay.dts b/arch/x86/dts/crownbay.dts index 60da1f5..3af9cc3 100644 --- a/arch/x86/dts/crownbay.dts +++ b/arch/x86/dts/crownbay.dts @@ -90,8 +90,12 @@ pci { #address-cells = <3>; #size-cells = <2>; - compatible = "intel,pci"; + compatible = "pci-x86"; device_type = "pci"; + u-boot,dm-pre-reloc; + ranges = <0x02000000 0x0 0x40000000 0x40000000 0 0x80000000 + 0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000 + 0x01000000 0x0 0x2000 0x2000 0 0xe000>; pcie@17,0 { #address-cells = <3>; diff --git a/arch/x86/dts/galileo.dts b/arch/x86/dts/galileo.dts index 2ba081e..d77ff8a 100644 --- a/arch/x86/dts/galileo.dts +++ b/arch/x86/dts/galileo.dts @@ -10,6 +10,7 @@ #include <dt-bindings/interrupt-router/intel-irq.h> /include/ "skeleton.dtsi" +/include/ "rtc.dtsi" / { model = "Intel Galileo"; diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts index 0e59b18..9527233 100644 --- a/arch/x86/dts/minnowmax.dts +++ b/arch/x86/dts/minnowmax.dts @@ -10,6 +10,7 @@ /include/ "skeleton.dtsi" /include/ "serial.dtsi" +/include/ "rtc.dtsi" / { model = "Intel Minnowboard Max"; diff --git a/arch/x86/dts/qemu-x86_i440fx.dts b/arch/x86/dts/qemu-x86_i440fx.dts index 557428a..c26c71b 100644 --- a/arch/x86/dts/qemu-x86_i440fx.dts +++ b/arch/x86/dts/qemu-x86_i440fx.dts @@ -10,6 +10,7 @@ /include/ "skeleton.dtsi" /include/ "serial.dtsi" +/include/ "rtc.dtsi" / { model = "QEMU x86 (I440FX)"; @@ -23,6 +24,18 @@ stdout-path = "/serial"; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "cpu-x86"; + reg = <0>; + intel,apic-id = <0>; + }; + }; + pci { compatible = "pci-x86"; #address-cells = <3>; diff --git a/arch/x86/dts/qemu-x86_q35.dts b/arch/x86/dts/qemu-x86_q35.dts index c259f2a..2e785fa 100644 --- a/arch/x86/dts/qemu-x86_q35.dts +++ b/arch/x86/dts/qemu-x86_q35.dts @@ -20,6 +20,7 @@ /include/ "skeleton.dtsi" /include/ "serial.dtsi" +/include/ "rtc.dtsi" / { model = "QEMU x86 (Q35)"; @@ -34,6 +35,18 @@ stdout-path = "/serial"; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "cpu-x86"; + reg = <0>; + intel,apic-id = <0>; + }; + }; + pci { compatible = "pci-x86"; #address-cells = <3>; diff --git a/arch/x86/dts/rtc.dtsi b/arch/x86/dts/rtc.dtsi index 93dacd7..1797e04 100644 --- a/arch/x86/dts/rtc.dtsi +++ b/arch/x86/dts/rtc.dtsi @@ -1,6 +1,7 @@ / { rtc { compatible = "motorola,mc146818"; + u-boot,dm-pre-reloc; reg = <0x70 2>; }; }; diff --git a/arch/x86/include/asm/arch-qemu/qemu.h b/arch/x86/include/asm/arch-qemu/qemu.h index 5cbffff..b67d342 100644 --- a/arch/x86/include/asm/arch-qemu/qemu.h +++ b/arch/x86/include/asm/arch-qemu/qemu.h @@ -13,10 +13,18 @@ #define PAM_NUM 7 #define PAM_RW 0x33 +/* X-Bus Chip Select Register */ +#define XBCS 0x4e +#define APIC_EN (1 << 8) + /* IDE Timing Register */ #define IDE0_TIM 0x40 #define IDE1_TIM 0x42 -#define IDE_DECODE_EN 0x8000 +#define IDE_DECODE_EN (1 << 15) + +/* PCIe ECAM Base Address Register */ +#define PCIEX_BAR 0x60 +#define BAR_EN (1 << 0) /* I/O Ports */ #define CMOS_ADDR_PORT 0x70 diff --git a/arch/x86/include/asm/interrupt.h b/arch/x86/include/asm/interrupt.h index 0a75f89..fcd766b 100644 --- a/arch/x86/include/asm/interrupt.h +++ b/arch/x86/include/asm/interrupt.h @@ -13,13 +13,33 @@ #include <asm/types.h> +/* Architecture defined exceptions */ +enum x86_exception { + EXC_DE = 0, + EXC_DB, + EXC_NMI, + EXC_BP, + EXC_OF, + EXC_BR, + EXC_UD, + EXC_NM, + EXC_DF, + EXC_CSO, + EXC_TS, + EXC_NP, + EXC_SS, + EXC_GP, + EXC_PF, + EXC_MF = 16, + EXC_AC, + EXC_MC, + EXC_XM, + EXC_VE +}; + /* arch/x86/cpu/interrupts.c */ void set_vector(u8 intnum, void *routine); -/* arch/x86/lib/interrupts.c */ -void disable_irq(int irq); -void enable_irq(int irq); - /* Architecture specific functions */ void mask_irq(int irq); void unmask_irq(int irq); diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index efa9231..ad8eba9 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -432,6 +432,23 @@ void mp_write_compat_address_space(struct mp_config_table *mc, int busid, u32 mptable_finalize(struct mp_config_table *mc); /** + * mp_determine_pci_dstirq() - Determine PCI device's int pin on the I/O APIC + * + * This determines a PCI device's interrupt pin number on the I/O APIC. + * + * This can be implemented by platform codes to handle specifal cases, which + * do not conform to the normal chipset/board design where PIRQ[A-H] are mapped + * directly to I/O APIC INTPIN#16-23. + * + * @bus: bus number of the pci device + * @dev: device number of the pci device + * @func: function number of the pci device + * @pirq: PIRQ number the PCI device's interrupt pin is routed to + * @return: interrupt pin number on the I/O APIC + */ +int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq); + +/** * write_mp_table() - Write MP table * * This writes MP table at a given address. diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h index 70762ee..f9b30f6 100644 --- a/arch/x86/include/asm/mtrr.h +++ b/arch/x86/include/asm/mtrr.h @@ -55,6 +55,8 @@ #define MTRR_FIX_4K_F0000_MSR 0x26e #define MTRR_FIX_4K_F8000_MSR 0x26f +#define MTRR_FIX_TYPE(t) ((t << 24) | (t << 16) | (t << 8) | t) + #if !defined(__ASSEMBLER__) /** diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index 56eaa25..f7e968e 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -72,11 +72,10 @@ int pci_x86_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, * * @bus: PCI bus number * @device: PCI device number - * @func: PCI function number * @irq: An array of IRQ numbers that are assigned to INTA through * INTD of this PCI device. */ -void pci_assign_irqs(int bus, int device, int func, u8 irq[4]); +void pci_assign_irqs(int bus, int device, u8 irq[4]); #endif /* __ASSEMBLY__ */ diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index a727dbf..3849bc0 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -63,9 +63,19 @@ struct irq_regs { /* Pushed by vector handler (irq_<num>) */ long irq_id; /* Pushed by cpu in response to interrupt */ - long eip; - long xcs; - long eflags; + union { + struct { + long eip; + long xcs; + long eflags; + } ctx1; + struct { + long err; + long eip; + long xcs; + long eflags; + } ctx2; + } context; } __attribute__ ((packed)); /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ diff --git a/arch/x86/lib/fsp/fsp_dram.c b/arch/x86/lib/fsp/fsp_dram.c index 4c0a7c8..28552fa 100644 --- a/arch/x86/lib/fsp/fsp_dram.c +++ b/arch/x86/lib/fsp/fsp_dram.c @@ -77,5 +77,11 @@ unsigned install_e820_map(unsigned max_entries, struct e820entry *entries) num_entries++; } + /* Mark PCIe ECAM address range as reserved */ + entries[num_entries].addr = CONFIG_PCIE_ECAM_BASE; + entries[num_entries].size = CONFIG_PCIE_ECAM_SIZE; + entries[num_entries].type = E820_RESERVED; + num_entries++; + return num_entries; } diff --git a/arch/x86/lib/mpspec.c b/arch/x86/lib/mpspec.c index f16fbcb..f3ad116 100644 --- a/arch/x86/lib/mpspec.c +++ b/arch/x86/lib/mpspec.c @@ -21,6 +21,8 @@ DECLARE_GLOBAL_DATA_PTR; +static bool isa_irq_occupied[16]; + struct mp_config_table *mp_write_floating_table(struct mp_floating_table *mf) { u32 mc; @@ -243,10 +245,18 @@ static void mptable_add_isa_interrupts(struct mp_config_table *mc, int bus_isa, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0, apicid, 2); - for (i = 3; i < 16; i++) + for (i = 3; i < 16; i++) { + /* + * Do not write ISA interrupt entry if it is already occupied + * by the platform devices. + */ + if (isa_irq_occupied[i]) + continue; + mp_write_intsrc(mc, MP_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, i, apicid, i); + } } /* @@ -269,6 +279,13 @@ static bool check_dup_entry(struct mpc_config_intsrc *intsrc_base, return (i == entry_num) ? false : true; } +/* TODO: move this to driver model */ +__weak int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq) +{ + /* PIRQ[A-H] are connected to I/O APIC INTPIN#16-23 */ + return pirq + 16; +} + static int mptable_add_intsrc(struct mp_config_table *mc, int bus_isa, int apicid) { @@ -280,10 +297,6 @@ static int mptable_add_intsrc(struct mp_config_table *mc, const u32 *cell; int i; - /* Legacy Interrupts */ - debug("Writing ISA IRQs\n"); - mptable_add_isa_interrupts(mc, bus_isa, apicid, 0); - /* Get I/O interrupt information from device tree */ node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_IRQ_ROUTER); if (node < 0) { @@ -304,28 +317,41 @@ static int mptable_add_intsrc(struct mp_config_table *mc, for (i = 0; i < count; i++) { struct pirq_routing pr; + int bus, dev, func; + int dstirq; pr.bdf = fdt_addr_to_cpu(cell[0]); pr.pin = fdt_addr_to_cpu(cell[1]); pr.pirq = fdt_addr_to_cpu(cell[2]); + bus = PCI_BUS(pr.bdf); + dev = PCI_DEV(pr.bdf); + func = PCI_FUNC(pr.bdf); if (check_dup_entry(intsrc_base, intsrc_entries, - PCI_BUS(pr.bdf), PCI_DEV(pr.bdf), pr.pin)) { + bus, dev, pr.pin)) { debug("found entry for bus %d device %d INT%c, skipping\n", - PCI_BUS(pr.bdf), PCI_DEV(pr.bdf), - 'A' + pr.pin - 1); + bus, dev, 'A' + pr.pin - 1); cell += sizeof(struct pirq_routing) / sizeof(u32); continue; } - /* PIRQ[A-H] are always connected to I/O APIC INTPIN#16-23 */ - mp_write_pci_intsrc(mc, MP_INT, PCI_BUS(pr.bdf), - PCI_DEV(pr.bdf), pr.pin, apicid, - pr.pirq + 16); + dstirq = mp_determine_pci_dstirq(bus, dev, func, pr.pirq); + /* + * For PIRQ which is connected to I/O APIC interrupt pin#0-15, + * mark it as occupied so that we can skip it later. + */ + if (dstirq < 16) + isa_irq_occupied[dstirq] = true; + mp_write_pci_intsrc(mc, MP_INT, bus, dev, pr.pin, + apicid, dstirq); intsrc_entries++; cell += sizeof(struct pirq_routing) / sizeof(u32); } + /* Legacy Interrupts */ + debug("Writing ISA IRQs\n"); + mptable_add_isa_interrupts(mc, bus_isa, apicid, 0); + return 0; } diff --git a/arch/x86/lib/pirq_routing.c b/arch/x86/lib/pirq_routing.c index 7a34dcf..ba41169 100644 --- a/arch/x86/lib/pirq_routing.c +++ b/arch/x86/lib/pirq_routing.c @@ -98,8 +98,7 @@ void pirq_route_irqs(struct irq_info *irq, int num) } /* Bus, device, slots IRQs for {A,B,C,D} */ - pci_assign_irqs(irq->bus, irq->devfn >> 3, irq->devfn & 7, - irq_slot); + pci_assign_irqs(irq->bus, irq->devfn >> 3, irq_slot); irq++; } diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c index 144471c..a1ec57e 100644 --- a/arch/x86/lib/zimage.c +++ b/arch/x86/lib/zimage.c @@ -61,8 +61,11 @@ __weak unsigned install_e820_map(unsigned max_entries, entries[2].addr = ISA_END_ADDRESS; entries[2].size = gd->ram_size - ISA_END_ADDRESS; entries[2].type = E820_RAM; + entries[3].addr = CONFIG_PCIE_ECAM_BASE; + entries[3].size = CONFIG_PCIE_ECAM_SIZE; + entries[3].type = E820_RESERVED; - return 3; + return 4; } static void build_command_line(char *command_line, int auto_boot) diff --git a/board/Marvell/db-88f6820-gp/README b/board/Marvell/db-88f6820-gp/README new file mode 100644 index 0000000..9bea5b3 --- /dev/null +++ b/board/Marvell/db-88f6820-gp/README @@ -0,0 +1,18 @@ +Update from original Marvell U-Boot to mainline U-Boot: +------------------------------------------------------- + +The resulting image including the SPL binary with the +full DDR setup is "u-boot-spl.kwb". + +To update the SPI NOR flash, please use the following +command: + +=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-spl.kwb;\ +sf update 2000000 0 60000 + +Note that the original Marvell U-Boot seems to have +problems with the "sf update" command. This does not +work reliable. So here this command should be used: + +=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-spl.kwb;\ +sf erase 0 60000;sf write 2000000 0 60000 diff --git a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c index 51ac495..e661fa1 100644 --- a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c +++ b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c @@ -11,6 +11,8 @@ #include <asm/arch/cpu.h> #include <asm/arch/soc.h> +#include "../drivers/ddr/marvell/a38x/ddr3_a38x_topology.h" + DECLARE_GLOBAL_DATA_PTR; #define BIT(nr) (1UL << (nr)) @@ -54,6 +56,35 @@ static struct marvell_io_exp io_exp[] = { { 0x21, 3, 0xC0 } /* Output Data, register#1 */ }; +/* + * Define the DDR layout / topology here in the board file. This will + * be used by the DDR3 init code in the SPL U-Boot version to configure + * the DDR3 controller. + */ +static struct hws_topology_map board_topology_map = { + 0x1, /* active interfaces */ + /* cs_mask, mirror, dqs_swap, ck_swap X PUPs */ + { { { {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0} }, + SPEED_BIN_DDR_1866L, /* speed_bin */ + BUS_WIDTH_8, /* memory_width */ + MEM_4G, /* mem_size */ + DDR_FREQ_800, /* frequency */ + 0, 0, /* cas_l cas_wl */ + HWS_TEMP_LOW} }, /* temperature */ + 5, /* Num Of Bus Per Interface*/ + BUS_MASK_32BIT /* Busses mask */ +}; + +struct hws_topology_map *ddr3_get_topology_map(void) +{ + /* Return the board topology as defined in the board code */ + return &board_topology_map; +} + int board_early_init_f(void) { /* Configure MPP */ diff --git a/board/Marvell/db-88f6820-gp/kwbimage.cfg b/board/Marvell/db-88f6820-gp/kwbimage.cfg index e812454..cc05792 100644 --- a/board/Marvell/db-88f6820-gp/kwbimage.cfg +++ b/board/Marvell/db-88f6820-gp/kwbimage.cfg @@ -9,4 +9,4 @@ VERSION 1 BOOT_FROM spi # Binary Header (bin_hdr) with DDR3 training code -BINARY board/Marvell/db-88f6820-gp/binary.0 0000005b 00000068 +BINARY spl/u-boot-spl.bin 0000005b 00000068 diff --git a/board/broadcom/bcm28155_ap/bcm28155_ap.c b/board/broadcom/bcm28155_ap/bcm28155_ap.c index 940a1c2..20eb191 100644 --- a/board/broadcom/bcm28155_ap/bcm28155_ap.c +++ b/board/broadcom/bcm28155_ap/bcm28155_ap.c @@ -12,12 +12,20 @@ #include <asm/kona-common/clk.h> #include <asm/arch/sysmap.h> +#include <usb.h> +#include <usb/s3c_udc.h> +#include <g_dnl.h> + #define SECWATCHDOG_SDOGCR_OFFSET 0x00000000 #define SECWATCHDOG_SDOGCR_EN_SHIFT 27 #define SECWATCHDOG_SDOGCR_SRSTEN_SHIFT 26 #define SECWATCHDOG_SDOGCR_CLKS_SHIFT 20 #define SECWATCHDOG_SDOGCR_LD_SHIFT 0 +#ifndef CONFIG_USB_SERIALNO +#define CONFIG_USB_SERIALNO "1234567890" +#endif + DECLARE_GLOBAL_DATA_PTR; /* @@ -85,3 +93,35 @@ int board_mmc_init(bd_t *bis) return ret; } #endif + +#ifdef CONFIG_USB_GADGET +static struct s3c_plat_otg_data bcm_otg_data = { + .regs_otg = HSOTG_BASE_ADDR +}; + +int board_usb_init(int index, enum usb_init_type init) +{ + debug("%s: performing s3c_udc_probe\n", __func__); + return s3c_udc_probe(&bcm_otg_data); +} + +int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) +{ + debug("%s\n", __func__); + if (!getenv("serial#")) + g_dnl_set_serialnumber(CONFIG_USB_SERIALNO); + return 0; +} + +int g_dnl_get_board_bcd_device_number(int gcnum) +{ + debug("%s\n", __func__); + return 1; +} + +int board_usb_cleanup(int index, enum usb_init_type init) +{ + debug("%s\n", __func__); + return 0; +} +#endif diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c index fad0551..6d3b18a 100644 --- a/board/compulab/cm_t54/cm_t54.c +++ b/board/compulab/cm_t54/cm_t54.c @@ -82,7 +82,7 @@ static int cm_t54_palmas_regulator_set(u8 vreg, u8 vval, u8 creg, u8 cval) #ifdef CONFIG_SYS_MMC_ENV_PART uint mmc_get_env_part(struct mmc *mmc) { - u32 bootmode = gd->arch.omap_boot_params.omap_bootmode; + u32 bootmode = gd->arch.omap_boot_mode; uint bootpart = CONFIG_SYS_MMC_ENV_PART; /* diff --git a/board/freescale/common/p_corenet/tlb.c b/board/freescale/common/p_corenet/tlb.c index 8148e46..56e4f63 100644 --- a/board/freescale/common/p_corenet/tlb.c +++ b/board/freescale/common/p_corenet/tlb.c @@ -43,6 +43,8 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 1 */ /* *I*** - Covers boot page */ #if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) + +#if !defined(CONFIG_SECURE_BOOT) /* * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the * SRAM is at 0xfff00000, it covered the 0xfffff000. @@ -50,6 +52,19 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_1M, 1), +#else + /* + * *I*G - L3SRAM. When L3 is used as 1M SRAM, in case of Secure Boot + * the physical address of the SRAM is at CONFIG_SYS_INIT_L3_ADDR, + * and virtual address is CONFIG_SYS_MONITOR_BASE + */ + + SET_TLB_ENTRY(1, CONFIG_SYS_MONITOR_BASE & 0xfff00000, + CONFIG_SYS_INIT_L3_ADDR & 0xfff00000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), +#endif + #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * SRIO_PCIE_BOOT-SLAVE. When slave boot, the address of the diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index 5cb7570..29aa778 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -90,7 +90,7 @@ static void show_eeprom(void) /* EEPROM tag ID, either CCID or NXID */ #ifdef CONFIG_SYS_I2C_EEPROM_NXID printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], - e.version); + be32_to_cpu(e.version)); #else printf("ID: %c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]); #endif @@ -340,7 +340,7 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (cmd == 'i') { #ifdef CONFIG_SYS_I2C_EEPROM_NXID memcpy(e.id, "NXID", sizeof(e.id)); - e.version = NXID_VERSION; + e.version = cpu_to_be32(NXID_VERSION); #else memcpy(e.id, "CCID", sizeof(e.id)); #endif @@ -485,7 +485,7 @@ int mac_read_from_eeprom(void) #ifdef CONFIG_SYS_I2C_EEPROM_NXID printf("%c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], - e.version); + be32_to_cpu(e.version)); #else printf("%c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]); #endif @@ -496,7 +496,7 @@ int mac_read_from_eeprom(void) * that at boot time, U-Boot will still say "NXID v0". */ if (e.version == 0) { - e.version = NXID_VERSION; + e.version = cpu_to_be32(NXID_VERSION); update_crc(); } #endif diff --git a/board/freescale/corenet_ds/MAINTAINERS b/board/freescale/corenet_ds/MAINTAINERS index 745847c..73b0553 100644 --- a/board/freescale/corenet_ds/MAINTAINERS +++ b/board/freescale/corenet_ds/MAINTAINERS @@ -28,3 +28,10 @@ F: configs/P5040DS_NAND_defconfig F: configs/P5040DS_SDCARD_defconfig F: configs/P5040DS_SPIFLASH_defconfig F: configs/P5040DS_SECURE_BOOT_defconfig + +CORENET_DS_SECURE_BOOT BOARD +M: Aneesh Bansal <aneesh.bansal@freescale.com> +S: Maintained +F: configs/P3041DS_NAND_SECURE_BOOT_defconfig +F: configs/P5020DS_NAND_SECURE_BOOT_defconfig +F: configs/P5040DS_NAND_SECURE_BOOT_defconfig diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 92f613a..ce5cb52 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -209,6 +209,9 @@ int board_early_init_f(void) out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN); #endif + /* Configure Little endian for SAI, ASRC and SPDIF */ + out_be32(&scfg->endiancr, SCFG_ENDIANCR_LE); + /* * Enable snoop requests and DVM message requests for * Slave insterface S4 (A7 core cluster) diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 043d938..8fef8e9 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -368,6 +368,9 @@ int board_early_init_f(void) out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); #endif + /* Configure Little endian for SAI, ASRC and SPDIF */ + out_be32(&scfg->endiancr, SCFG_ENDIANCR_LE); + /* * Enable snoop requests and DVM message requests for * Slave insterface S4 (A7 core cluster) diff --git a/board/freescale/ls2085a/README b/board/freescale/ls2085a/README index b7023e1..bc1d0bb 100644 --- a/board/freescale/ls2085a/README +++ b/board/freescale/ls2085a/README @@ -14,3 +14,14 @@ Memory map from core's view Other addresses are either reserved, or not used directly by u-boot. This list should be updated when more addresses are used. + +Booting Linux flavors which do not support 48-bit VA (< Linux 3.18) +------------------------------------------------------------------- +One needs to use appropriate bootargs to boot Linux flavors which do +not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown +below: + +=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram + earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m + hugepages=16 mem=2048M' + diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2085a/ls2085a.c index dd0acf2..73c4410 100644 --- a/board/freescale/ls2085a/ls2085a.c +++ b/board/freescale/ls2085a/ls2085a.c @@ -80,7 +80,7 @@ unsigned long get_dram_size_to_hide(void) dram_to_hide += mc_get_dram_block_size(); #endif - return dram_to_hide; + return roundup(dram_to_hide, CONFIG_SYS_MEM_TOP_HIDE_MIN); } int board_eth_init(bd_t *bis) @@ -127,15 +127,18 @@ void fdt_fixup_board_enet(void *fdt) #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { - phys_addr_t base; - phys_size_t size; + u64 base[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; ft_cpu_setup(blob, bd); - /* limit the memory size to bank 1 until Linux can handle 40-bit PA */ - base = getenv_bootm_low(); - size = getenv_bootm_size(); - fdt_fixup_memory(blob, (u64)base, (u64)size); + /* fixup DT for the two GPP DDR banks */ + base[0] = gd->bd->bi_dram[0].start; + size[0] = gd->bd->bi_dram[0].size; + base[1] = gd->bd->bi_dram[1].start; + size[1] = gd->bd->bi_dram[1].size; + + fdt_fixup_memory_banks(blob, base, size, 2); #ifdef CONFIG_FSL_MC_ENET fdt_fixup_board_enet(blob); diff --git a/board/freescale/ls2085aqds/README b/board/freescale/ls2085aqds/README index fb3938e..11b2e79 100644 --- a/board/freescale/ls2085aqds/README +++ b/board/freescale/ls2085aqds/README @@ -127,3 +127,22 @@ b) NOR boot c) NAND boot d) SD boot e) QSPI boot + +Environment Variables +--------------------- +- mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined + the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed. + +- mcmemsize: MC DRAM block size. If this variable is not defined + the value CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed. + +Booting Linux flavors which do not support 48-bit VA (< Linux 3.18) +------------------------------------------------------------------- +One needs to use appropriate bootargs to boot Linux flavors which do +not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown +below: + +=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram + earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m + hugepages=16 mem=2048M' + diff --git a/board/freescale/ls2085aqds/eth.c b/board/freescale/ls2085aqds/eth.c index 5ba4770..1f8a31f 100644 --- a/board/freescale/ls2085aqds/eth.c +++ b/board/freescale/ls2085aqds/eth.c @@ -53,7 +53,7 @@ static int riser_phy_addr[] = { #define EMI1_SLOT5 4 #define EMI1_SLOT6 5 #define EMI2 6 -#define SFP_TX 1 +#define SFP_TX 0 static const char * const mdio_names[] = { "LS2085A_QDS_MDIO0", @@ -210,6 +210,7 @@ static void initialize_dpmac_to_slot(void) switch (serdes2_prtcl) { case 0x07: case 0x08: + case 0x49: printf("qds: WRIOP: Supported SerDes Protocol 0x%02x\n", serdes2_prtcl); lane_to_slot_fsm2[0] = EMI1_SLOT4; @@ -247,6 +248,7 @@ void ls2085a_handle_phy_interface_sgmii(int dpmac_id) switch (serdes2_prtcl) { case 0x07: case 0x08: + case 0x49: lane = serdes_get_first_lane(FSL_SRDS_2, SGMII9 + (dpmac_id - 9)); slot = lane_to_slot_fsm2[lane]; diff --git a/board/freescale/ls2085aqds/ls2085aqds.c b/board/freescale/ls2085aqds/ls2085aqds.c index 6a22122..08906a6 100644 --- a/board/freescale/ls2085aqds/ls2085aqds.c +++ b/board/freescale/ls2085aqds/ls2085aqds.c @@ -17,12 +17,23 @@ #include <environment.h> #include <i2c.h> #include <asm/arch-fsl-lsch3/soc.h> +#include <hwconfig.h> #include "../common/qixis.h" #include "ls2085aqds_qixis.h" +#define PIN_MUX_SEL_SDHC 0x00 +#define PIN_MUX_SEL_DSPI 0x0a + +#define SET_SDHC_MUX_SEL(reg, value) ((reg & 0xf0) | value) + DECLARE_GLOBAL_DATA_PTR; +enum { + MUX_TYPE_SDHC, + MUX_TYPE_DSPI, +}; + unsigned long long get_qixis_addr(void) { unsigned long long addr; @@ -49,11 +60,15 @@ int checkboard(void) "100 separate SSCG"}; int clock; + cpu_name(buf); + printf("Board: %s-QDS, ", buf); + sw = QIXIS_READ(arch); - printf("Board: %s, ", CONFIG_IDENT_STRING); printf("Board Arch: V%d, ", sw >> 4); printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1); + memset((u8 *)buf, 0x00, ARRAY_SIZE(buf)); + sw = QIXIS_READ(brdcfg[0]); sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; @@ -149,10 +164,47 @@ int select_i2c_ch_pca9547(u8 ch) return 0; } +int config_board_mux(int ctrl_type) +{ + u8 reg5; + + reg5 = QIXIS_READ(brdcfg[5]); + + switch (ctrl_type) { + case MUX_TYPE_SDHC: + reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_SDHC); + break; + case MUX_TYPE_DSPI: + reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_DSPI); + break; + default: + printf("Wrong mux interface type\n"); + return -1; + } + + QIXIS_WRITE(brdcfg[5], reg5); + + return 0; +} + int board_init(void) { + char *env_hwconfig; + u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; + u32 val; + init_final_memctl_regs(); + val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4); + + env_hwconfig = getenv("hwconfig"); + + if (hwconfig_f("dspi", env_hwconfig) && + DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8))) + config_board_mux(MUX_TYPE_DSPI); + else + config_board_mux(MUX_TYPE_SDHC); + #ifdef CONFIG_ENV_IS_NOWHERE gd->env_addr = (ulong)&default_environment[0]; #endif @@ -211,7 +263,7 @@ unsigned long get_dram_size_to_hide(void) dram_to_hide += mc_get_dram_block_size(); #endif - return dram_to_hide; + return roundup(dram_to_hide, CONFIG_SYS_MEM_TOP_HIDE_MIN); } #ifdef CONFIG_FSL_MC_ENET @@ -240,15 +292,18 @@ void fdt_fixup_board_enet(void *fdt) #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { - phys_addr_t base; - phys_size_t size; + u64 base[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; ft_cpu_setup(blob, bd); - /* limit the memory size to bank 1 until Linux can handle 40-bit PA */ - base = getenv_bootm_low(); - size = getenv_bootm_size(); - fdt_fixup_memory(blob, (u64)base, (u64)size); + /* fixup DT for the two GPP DDR banks */ + base[0] = gd->bd->bi_dram[0].start; + size[0] = gd->bd->bi_dram[0].size; + base[1] = gd->bd->bi_dram[1].start; + size[1] = gd->bd->bi_dram[1].size; + + fdt_fixup_memory_banks(blob, base, size, 2); #ifdef CONFIG_FSL_MC_ENET fdt_fixup_board_enet(blob); diff --git a/board/freescale/ls2085ardb/Makefile b/board/freescale/ls2085ardb/Makefile index 0bfe21c..de383cc 100644 --- a/board/freescale/ls2085ardb/Makefile +++ b/board/freescale/ls2085ardb/Makefile @@ -4,5 +4,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += ls2085ardb.o +obj-y += ls2085ardb.o eth_ls2085rdb.o obj-y += ddr.o diff --git a/board/freescale/ls2085ardb/README b/board/freescale/ls2085ardb/README index cfd5185..2f18243 100644 --- a/board/freescale/ls2085ardb/README +++ b/board/freescale/ls2085ardb/README @@ -107,3 +107,14 @@ Booting Options --------------- a) NOR boot b) NAND boot + +Booting Linux flavors which do not support 48-bit VA (< Linux 3.18) +------------------------------------------------------------------- +One needs to use appropriate bootargs to boot Linux flavors which do +not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown +below: + +=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram + earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m + hugepages=16 mem=2048M' + diff --git a/board/freescale/ls2085ardb/eth_ls2085rdb.c b/board/freescale/ls2085ardb/eth_ls2085rdb.c new file mode 100644 index 0000000..0a1163a --- /dev/null +++ b/board/freescale/ls2085ardb/eth_ls2085rdb.c @@ -0,0 +1,148 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <netdev.h> +#include <malloc.h> +#include <fsl_mdio.h> +#include <miiphy.h> +#include <phy.h> +#include <fm_eth.h> +#include <asm/io.h> +#include <exports.h> +#include <asm/arch/fsl_serdes.h> +#include <asm/arch-fsl-lsch3/immap_lsch3.h> +#include <fsl-mc/ldpaa_wriop.h> + +DECLARE_GLOBAL_DATA_PTR; + +int load_firmware_cortina(struct phy_device *phy_dev) +{ + if (phy_dev->drv->config) + return phy_dev->drv->config(phy_dev); + + return 0; +} + +void load_phy_firmware(void) +{ + int i; + u8 phy_addr; + struct phy_device *phy_dev; + struct mii_dev *dev; + phy_interface_t interface; + + /*Initialize and upload firmware for all the PHYs*/ + for (i = WRIOP1_DPMAC1; i <= WRIOP1_DPMAC8; i++) { + interface = wriop_get_enet_if(i); + if (interface == PHY_INTERFACE_MODE_XGMII) { + dev = wriop_get_mdio(i); + phy_addr = wriop_get_phy_address(i); + phy_dev = phy_find_by_mask(dev, 1 << phy_addr, + interface); + if (!phy_dev) { + printf("No phydev for phyaddr %d\n", phy_addr); + continue; + } + + /*Flash firmware for All CS4340 PHYS */ + if (phy_dev->phy_id == PHY_UID_CS4340) + load_firmware_cortina(phy_dev); + } + } +} + +int board_eth_init(bd_t *bis) +{ +#if defined(CONFIG_FSL_MC_ENET) + int i, interface; + struct memac_mdio_info mdio_info; + struct mii_dev *dev; + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 srds_s1; + struct memac_mdio_controller *reg; + + srds_s1 = in_le32(&gur->rcwsr[28]) & + FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK; + srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT; + + reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO1; + mdio_info.regs = reg; + mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME; + + /* Register the EMI 1 */ + fm_memac_mdio_init(bis, &mdio_info); + + reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO2; + mdio_info.regs = reg; + mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME; + + /* Register the EMI 2 */ + fm_memac_mdio_init(bis, &mdio_info); + + switch (srds_s1) { + case 0x2A: + wriop_set_phy_address(WRIOP1_DPMAC1, CORTINA_PHY_ADDR1); + wriop_set_phy_address(WRIOP1_DPMAC2, CORTINA_PHY_ADDR2); + wriop_set_phy_address(WRIOP1_DPMAC3, CORTINA_PHY_ADDR3); + wriop_set_phy_address(WRIOP1_DPMAC4, CORTINA_PHY_ADDR4); + wriop_set_phy_address(WRIOP1_DPMAC5, AQ_PHY_ADDR1); + wriop_set_phy_address(WRIOP1_DPMAC6, AQ_PHY_ADDR2); + wriop_set_phy_address(WRIOP1_DPMAC7, AQ_PHY_ADDR3); + wriop_set_phy_address(WRIOP1_DPMAC8, AQ_PHY_ADDR4); + + break; + default: + printf("SerDes1 protocol 0x%x is not supported on LS2085aRDB\n", + srds_s1); + break; + } + + for (i = WRIOP1_DPMAC1; i <= WRIOP1_DPMAC4; i++) { + interface = wriop_get_enet_if(i); + switch (interface) { + case PHY_INTERFACE_MODE_XGMII: + dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME); + wriop_set_mdio(i, dev); + break; + default: + break; + } + } + + for (i = WRIOP1_DPMAC5; i <= WRIOP1_DPMAC8; i++) { + switch (wriop_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME); + wriop_set_mdio(i, dev); + break; + default: + break; + } + } + + /* Load CORTINA CS4340 PHY firmware */ + load_phy_firmware(); + + cpu_eth_init(bis); +#endif /* CONFIG_FMAN_ENET */ + +#ifdef CONFIG_PHY_AQUANTIA + /* + * Export functions to be used by AQ firmware + * upload application + */ + gd->jt->strcpy = strcpy; + gd->jt->mdelay = mdelay; + gd->jt->mdio_get_current_dev = mdio_get_current_dev; + gd->jt->phy_find_by_mask = phy_find_by_mask; + gd->jt->mdio_phydev_for_ethname = mdio_phydev_for_ethname; + gd->jt->miiphy_set_current_dev = miiphy_set_current_dev; +#endif + return pci_eth_init(bis); +} diff --git a/board/freescale/ls2085ardb/ls2085ardb.c b/board/freescale/ls2085ardb/ls2085ardb.c index d05f2bc..5e7997c 100644 --- a/board/freescale/ls2085ardb/ls2085ardb.c +++ b/board/freescale/ls2085ardb/ls2085ardb.c @@ -10,6 +10,7 @@ #include <fsl_ifc.h> #include <fsl_ddr.h> #include <asm/io.h> +#include <hwconfig.h> #include <fdt_support.h> #include <libfdt.h> #include <fsl_debug_server.h> @@ -21,8 +22,17 @@ #include "../common/qixis.h" #include "ls2085ardb_qixis.h" +#define PIN_MUX_SEL_SDHC 0x00 +#define PIN_MUX_SEL_DSPI 0x0a + +#define SET_SDHC_MUX_SEL(reg, value) ((reg & 0xf0) | value) DECLARE_GLOBAL_DATA_PTR; +enum { + MUX_TYPE_SDHC, + MUX_TYPE_DSPI, +}; + unsigned long long get_qixis_addr(void) { unsigned long long addr; @@ -44,11 +54,14 @@ unsigned long long get_qixis_addr(void) int checkboard(void) { u8 sw; + char buf[15]; + + cpu_name(buf); + printf("Board: %s-RDB, ", buf); sw = QIXIS_READ(arch); - printf("Board: %s, ", CONFIG_IDENT_STRING); printf("Board Arch: V%d, ", sw >> 4); - printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1); + printf("Board version: %c, boot from ", (sw & 0xf) + 'A'); sw = QIXIS_READ(brdcfg[0]); sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; @@ -109,10 +122,47 @@ int select_i2c_ch_pca9547(u8 ch) return 0; } +int config_board_mux(int ctrl_type) +{ + u8 reg5; + + reg5 = QIXIS_READ(brdcfg[5]); + + switch (ctrl_type) { + case MUX_TYPE_SDHC: + reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_SDHC); + break; + case MUX_TYPE_DSPI: + reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_DSPI); + break; + default: + printf("Wrong mux interface type\n"); + return -1; + } + + QIXIS_WRITE(brdcfg[5], reg5); + + return 0; +} + int board_init(void) { + char *env_hwconfig; + u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; + u32 val; + init_final_memctl_regs(); + val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4); + + env_hwconfig = getenv("hwconfig"); + + if (hwconfig_f("dspi", env_hwconfig) && + DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8))) + config_board_mux(MUX_TYPE_DSPI); + else + config_board_mux(MUX_TYPE_SDHC); + #ifdef CONFIG_ENV_IS_NOWHERE gd->env_addr = (ulong)&default_environment[0]; #endif @@ -129,6 +179,14 @@ int board_early_init_f(void) return 0; } +int misc_init_r(void) +{ + if (hwconfig("sdhc")) + config_board_mux(MUX_TYPE_SDHC); + + return 0; +} + void detail_board_ddr_info(void) { puts("\nDDR "); @@ -173,20 +231,7 @@ unsigned long get_dram_size_to_hide(void) dram_to_hide += mc_get_dram_block_size(); #endif - return dram_to_hide; -} - -int board_eth_init(bd_t *bis) -{ - int error = 0; - -#ifdef CONFIG_FSL_MC_ENET - error = cpu_eth_init(bis); -#endif - - error = pci_eth_init(bis); - - return error; + return roundup(dram_to_hide, CONFIG_SYS_MEM_TOP_HIDE_MIN); } #ifdef CONFIG_FSL_MC_ENET @@ -215,15 +260,18 @@ void fdt_fixup_board_enet(void *fdt) #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { - phys_addr_t base; - phys_size_t size; + u64 base[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; ft_cpu_setup(blob, bd); - /* limit the memory size to bank 1 until Linux can handle 40-bit PA */ - base = getenv_bootm_low(); - size = getenv_bootm_size(); - fdt_fixup_memory(blob, (u64)base, (u64)size); + /* fixup DT for the two GPP DDR banks */ + base[0] = gd->bd->bi_dram[0].start; + size[0] = gd->bd->bi_dram[0].size; + base[1] = gd->bd->bi_dram[1].start; + size[1] = gd->bd->bi_dram[1].size; + + fdt_fixup_memory_banks(blob, base, size, 2); #ifdef CONFIG_FSL_MC_ENET fdt_fixup_board_enet(blob); @@ -247,3 +295,22 @@ void qixis_dump_switch(void) printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1])); } } + +/* + * Board rev C and earlier has duplicated I2C addresses for 2nd controller. + * Both slots has 0x54, resulting 2nd slot unusable. + */ +void update_spd_address(unsigned int ctrl_num, + unsigned int slot, + unsigned int *addr) +{ + u8 sw; + + sw = QIXIS_READ(arch); + if ((sw & 0xf) < 0x3) { + if (ctrl_num == 1 && slot == 0) + *addr = SPD_EEPROM_ADDRESS4; + else if (ctrl_num == 1 && slot == 1) + *addr = SPD_EEPROM_ADDRESS3; + } +} diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c index 3f47cfb..61b7a91 100644 --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c @@ -428,8 +428,13 @@ int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; +#if defined(CONFIG_P1020RDB_PD) || defined(CONFIG_P1020RDB_PC) const char *soc_usb_compat = "fsl-usb2-dr"; - int err, usb1_off, usb2_off; + int usb_err, usb1_off, usb2_off; +#endif +#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) + int err; +#endif ft_cpu_setup(blob, bd); @@ -473,6 +478,7 @@ int ft_board_setup(void *blob, bd_t *bd) } #endif +#if defined(CONFIG_P1020RDB_PD) || defined(CONFIG_P1020RDB_PC) /* Delete USB2 node as it is muxed with eLBC */ usb1_off = fdt_node_offset_by_compatible(blob, -1, soc_usb_compat); @@ -488,11 +494,12 @@ int ft_board_setup(void *blob, bd_t *bd) soc_usb_compat); return usb2_off; } - err = fdt_del_node(blob, usb2_off); - if (err < 0) { + usb_err = fdt_del_node(blob, usb2_off); + if (usb_err < 0) { printf("WARNING: could not remove %s\n", soc_usb_compat); - return err; + return usb_err; } +#endif return 0; } diff --git a/board/freescale/t102xqds/t1024_pbi.cfg b/board/freescale/t102xqds/t1024_pbi.cfg index 7b9e9b0..98efca2 100644 --- a/board/freescale/t102xqds/t1024_pbi.cfg +++ b/board/freescale/t102xqds/t1024_pbi.cfg @@ -6,7 +6,7 @@ #Configure CPC1 as 256KB SRAM 09010100 00000000 09010104 fffc0007 -09010f00 08000000 +09010f00 081e000d 09010000 80000000 #Configure LAW for CPC1 09000cd0 00000000 diff --git a/board/freescale/t102xrdb/README b/board/freescale/t102xrdb/README index 922450e..7d3794a 100644 --- a/board/freescale/t102xrdb/README +++ b/board/freescale/t102xrdb/README @@ -70,6 +70,7 @@ Deep Sleep: yes no I2C controller: 4 3 DDR: 64-bit 32-bit IFC: 32-bit 28-bit +Package: 23x23 19x19 T1024RDB board Overview @@ -192,7 +193,7 @@ Software configurations and board settings on T1024RDB: set SW1[1:8] = '00010011', SW2[1] = '1', SW3[4] = '0' for NOR boot on T1023RDB: - set SW1[1:8] = '00010110', SW2[1] = '0', SW3[4] = '0' for NOR boot + set SW1[1:8] = '00010111', SW2[1] = '1', SW3[4] = '0' for NOR boot Switching between default bank0 and alternate bank4 on NOR flash To change boot source to vbank4: @@ -200,7 +201,7 @@ Software configurations and board settings via software: run command 'cpld reset altbank' in u-boot. via DIP-switch: set SW3[5:7] = '100' on T1023RDB: - via software: run command 'gpio vbank4' in u-boot. + via software: run command 'switch bank4' in u-boot. via DIP-switch: set SW3[5:7] = '100' To change boot source to vbank0: @@ -208,7 +209,7 @@ Software configurations and board settings via software: run command 'cpld reset' in u-boot. via DIP-Switch: set SW3[5:7] = '000' on T1023RDB: - via software: run command 'gpio vbank0' in u-boot. + via software: run command 'switch bank0' in u-boot. via DIP-switch: set SW3[5:7] = '000' 2. NAND Boot: @@ -219,7 +220,7 @@ Software configurations and board settings => tftp 1000000 u-boot-with-spl-pbl.bin => nand erase 0 $filesize => nand write 1000000 0 $filesize - set SW1[1:8] = '10001000', SW2[1] = '1', SW3[4] = '1' for NAND boot + set SW1[1:8] = '10000010', SW2[1] = '1', SW3[4] = '1' for NAND boot 3. SPI Boot: a. build PBL image for SPI boot @@ -241,11 +242,14 @@ Software configurations and board settings $ make b. program u-boot-with-spl-pbl.bin to SD/MMC card => tftp 1000000 u-boot-with-spl-pbl.bin - => mmc write 1000000 8 0x800 + => mmc write 1000000 8 0x7f0 => tftp 1000000 fsl_fman_ucode_t1024_xx.bin => mmc write 1000000 0x820 80 set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot + SW3[3] = '1' for SD card(or 'switch sd' by software) + SW3[3] = '0' for eMMC (or 'switch emmc' by software) + 2-stage NAND/SPI/SD boot loader ------------------------------- @@ -292,7 +296,7 @@ Start End Definition Size 0x160000 0x17FFFF FMAN Ucode 128KB -SD Card memory Map on T1024RDB +SD Card memory Map on T102xRDB ---------------------------------------------------- Block #blocks Definition Size 0x008 2048 u-boot img 1MB @@ -313,5 +317,5 @@ Start End Definition Size 0xa00000 0x3FFFFFF rootfs 54MB -For more details, please refer to T1024RDB Reference Manual +For more details, please refer to T1024RDB/T1023RDB User Guide and Freescale QorIQ SDK Infocenter document. diff --git a/board/freescale/t102xrdb/spl.c b/board/freescale/t102xrdb/spl.c index 1a3a996..9c581ff 100644 --- a/board/freescale/t102xrdb/spl.c +++ b/board/freescale/t102xrdb/spl.c @@ -30,6 +30,30 @@ unsigned long get_board_ddr_clk(void) return CONFIG_DDR_CLK_FREQ; } +#if defined(CONFIG_SPL_MMC_BOOT) +#define GPIO1_SD_SEL 0x00020000 +int board_mmc_getcd(struct mmc *mmc) +{ + ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); + u32 val = in_be32(&pgpio->gpdat); + + /* GPIO1_14, 0: eMMC, 1: SD */ + val &= GPIO1_SD_SEL; + + return val ? -1 : 1; +} + +int board_mmc_getwp(struct mmc *mmc) +{ + ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); + u32 val = in_be32(&pgpio->gpdat); + + val &= GPIO1_SD_SEL; + + return val ? -1 : 0; +} +#endif + void board_init_f(ulong bootflag) { u32 plat_ratio, sys_clk, ccb_clk; diff --git a/board/freescale/t102xrdb/t1023_rcw.cfg b/board/freescale/t102xrdb/t1023_rcw.cfg index fa781d6..1d11a2e 100644 --- a/board/freescale/t102xrdb/t1023_rcw.cfg +++ b/board/freescale/t102xrdb/t1023_rcw.cfg @@ -4,5 +4,5 @@ aa55aa55 010e0100 #Core/DDR: 1400Mhz/1600MT/s with single source clock 0810000e 00000000 00000000 00000000 3b800003 00000012 e8104000 21000000 -00000000 00000000 00000000 00020800 +00000000 00000000 00000000 00022800 00000130 04020200 00000000 00000006 diff --git a/board/freescale/t102xrdb/t1024_pbi.cfg b/board/freescale/t102xrdb/t1024_pbi.cfg index 7b9e9b0..98efca2 100644 --- a/board/freescale/t102xrdb/t1024_pbi.cfg +++ b/board/freescale/t102xrdb/t1024_pbi.cfg @@ -6,7 +6,7 @@ #Configure CPC1 as 256KB SRAM 09010100 00000000 09010104 fffc0007 -09010f00 08000000 +09010f00 081e000d 09010000 80000000 #Configure LAW for CPC1 09000cd0 00000000 diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c index f971976..fddd240 100644 --- a/board/freescale/t102xrdb/t102xrdb.c +++ b/board/freescale/t102xrdb/t102xrdb.c @@ -20,6 +20,9 @@ #include "t102xrdb.h" #ifdef CONFIG_T1024RDB #include "cpld.h" +#elif defined(CONFIG_T1023RDB) +#include <i2c.h> +#include <mmc.h> #endif #include "../common/sleep.h" @@ -27,13 +30,14 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_T1023RDB enum { - GPIO1_SD_SEL = 0x00020000, /* GPIO1_14, 0: EMMC, 1:SD/MMC */ + GPIO1_SD_SEL = 0x00020000, /* GPIO1_14, 0: eMMC, 1:SD/MMC */ GPIO1_EMMC_SEL, - GPIO1_VBANK0, - GPIO1_VBANK4 = 0x00008000, /* GPIO1_16/20/22, 100:vBank4 */ - GPIO1_VBANK_MASK = 0x00008a00, - GPIO1_DIR_OUTPUT = 0x00028a00, - GPIO1_GET_VAL, + GPIO3_GET_VERSION, /* GPIO3_4/5, 00:RevB, 01: RevC */ + GPIO3_BRD_VER_MASK = 0x0c000000, + GPIO3_OFFSET = 0x2000, + I2C_GET_BANK, + I2C_SET_BANK0, + I2C_SET_BANK4, }; #endif @@ -48,9 +52,11 @@ int checkboard(void) srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; printf("Board: %sRDB, ", cpu->name); -#ifdef CONFIG_T1024RDB +#if defined(CONFIG_T1024RDB) printf("Board rev: 0x%02x CPLD ver: 0x%02x, ", CPLD_READ(hw_ver), CPLD_READ(sw_ver)); +#elif defined(CONFIG_T1023RDB) + printf("Rev%c, ", t1023rdb_ctrl(GPIO3_GET_VERSION) + 'B'); #endif printf("boot from "); @@ -73,8 +79,7 @@ int checkboard(void) #ifdef CONFIG_NAND puts("NAND\n"); #else - printf("NOR vBank%d\n", (t1023rdb_gpio_ctrl(GPIO1_GET_VAL) & - GPIO1_VBANK4) >> 15 ? 4 : 0); + printf("NOR vBank%d\n", t1023rdb_ctrl(I2C_GET_BANK)); #endif #endif @@ -196,64 +201,126 @@ int ft_board_setup(void *blob, bd_t *bd) fdt_fixup_board_enet(blob); #endif +#ifdef CONFIG_T1023RDB + if (t1023rdb_ctrl(GPIO3_GET_VERSION) > 0) + fdt_enable_nor(blob); +#endif + return 0; } - #ifdef CONFIG_T1023RDB -static u32 t1023rdb_gpio_ctrl(u32 ctrl_type) +/* Enable NOR flash for RevC */ +static void fdt_enable_nor(void *blob) { - ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - u32 gpioval; + int nodeoff = fdt_node_offset_by_compatible(blob, 0, "cfi-flash"); + + if (nodeoff >= 0) + fdt_status_okay(blob, nodeoff); + else + printf("WARNING unable to set status for NOR\n"); +} - setbits_be32(&pgpio->gpdir, GPIO1_DIR_OUTPUT); - gpioval = in_be32(&pgpio->gpdat); +int board_mmc_getcd(struct mmc *mmc) +{ + ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); + u32 val = in_be32(&pgpio->gpdat); + + /* GPIO1_14, 0: eMMC, 1: SD/MMC */ + val &= GPIO1_SD_SEL; + + return val ? -1 : 1; +} + +int board_mmc_getwp(struct mmc *mmc) +{ + ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); + u32 val = in_be32(&pgpio->gpdat); + + val &= GPIO1_SD_SEL; + + return val ? -1 : 0; +} + +static u32 t1023rdb_ctrl(u32 ctrl_type) +{ + ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); + ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 val, orig_bus = i2c_get_bus_num(); + u8 tmp; switch (ctrl_type) { case GPIO1_SD_SEL: - gpioval |= GPIO1_SD_SEL; + val = in_be32(&pgpio->gpdat); + val |= GPIO1_SD_SEL; + out_be32(&pgpio->gpdat, val); + setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL); break; case GPIO1_EMMC_SEL: - gpioval &= ~GPIO1_SD_SEL; + val = in_be32(&pgpio->gpdat); + val &= ~GPIO1_SD_SEL; + out_be32(&pgpio->gpdat, val); + setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL); break; - case GPIO1_VBANK0: - gpioval &= ~GPIO1_VBANK_MASK; + case GPIO3_GET_VERSION: + pgpio = (ccsr_gpio_t *)(CONFIG_SYS_MPC85xx_GPIO_ADDR + + GPIO3_OFFSET); + val = in_be32(&pgpio->gpdat); + val = ((val & GPIO3_BRD_VER_MASK) >> 26) & 0x3; + if (val == 0x3) /* GPIO3_4/5 not used on RevB */ + val = 0; + return val; + case I2C_GET_BANK: + i2c_set_bus_num(I2C_PCA6408_BUS_NUM); + i2c_read(I2C_PCA6408_ADDR, 0, 1, &tmp, 1); + tmp &= 0x7; + tmp = ((tmp & 1) << 2) | (tmp & 2) | ((tmp & 4) >> 2); + i2c_set_bus_num(orig_bus); + return tmp; + case I2C_SET_BANK0: + i2c_set_bus_num(I2C_PCA6408_BUS_NUM); + tmp = 0x0; + i2c_write(I2C_PCA6408_ADDR, 1, 1, &tmp, 1); + tmp = 0xf8; + i2c_write(I2C_PCA6408_ADDR, 3, 1, &tmp, 1); + /* asserting HRESET_REQ */ + out_be32(&gur->rstcr, 0x2); break; - case GPIO1_VBANK4: - gpioval &= ~GPIO1_VBANK_MASK; - gpioval |= GPIO1_VBANK4; + case I2C_SET_BANK4: + i2c_set_bus_num(I2C_PCA6408_BUS_NUM); + tmp = 0x1; + i2c_write(I2C_PCA6408_ADDR, 1, 1, &tmp, 1); + tmp = 0xf8; + i2c_write(I2C_PCA6408_ADDR, 3, 1, &tmp, 1); + out_be32(&gur->rstcr, 0x2); break; - case GPIO1_GET_VAL: - return gpioval; default: break; } - out_be32(&pgpio->gpdat, gpioval); - return 0; } -static int gpio_cmd(cmd_tbl_t *cmdtp, int flag, int argc, +static int switch_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { if (argc < 2) return CMD_RET_USAGE; - if (!strcmp(argv[1], "vbank0")) - t1023rdb_gpio_ctrl(GPIO1_VBANK0); - else if (!strcmp(argv[1], "vbank4")) - t1023rdb_gpio_ctrl(GPIO1_VBANK4); + if (!strcmp(argv[1], "bank0")) + t1023rdb_ctrl(I2C_SET_BANK0); + else if (!strcmp(argv[1], "bank4") || !strcmp(argv[1], "altbank")) + t1023rdb_ctrl(I2C_SET_BANK4); else if (!strcmp(argv[1], "sd")) - t1023rdb_gpio_ctrl(GPIO1_SD_SEL); - else if (!strcmp(argv[1], "EMMC")) - t1023rdb_gpio_ctrl(GPIO1_EMMC_SEL); + t1023rdb_ctrl(GPIO1_SD_SEL); + else if (!strcmp(argv[1], "emmc")) + t1023rdb_ctrl(GPIO1_EMMC_SEL); else return CMD_RET_USAGE; return 0; } U_BOOT_CMD( - gpio, 2, 0, gpio_cmd, - "for vbank0/vbank4/SD/eMMC switch control in runtime", - "command (e.g. gpio vbank4)" + switch, 2, 0, switch_cmd, + "for bank0/bank4/sd/emmc switch control in runtime", + "command (e.g. switch bank4)" ); #endif diff --git a/board/freescale/t102xrdb/t102xrdb.h b/board/freescale/t102xrdb/t102xrdb.h index 3f5d85a..ae5c60f 100644 --- a/board/freescale/t102xrdb/t102xrdb.h +++ b/board/freescale/t102xrdb/t102xrdb.h @@ -10,6 +10,7 @@ void fdt_fixup_board_enet(void *blob); void pci_of_setup(void *blob, bd_t *bd); #ifdef CONFIG_T1023RDB -static u32 t1023rdb_gpio_ctrl(u32 ctrl_type); +static u32 t1023rdb_ctrl(u32 ctrl_type); +static void fdt_enable_nor(void *blob); #endif #endif diff --git a/board/freescale/t1040qds/t1040_pbi.cfg b/board/freescale/t1040qds/t1040_pbi.cfg index 10b1a6d..121b005 100644 --- a/board/freescale/t1040qds/t1040_pbi.cfg +++ b/board/freescale/t1040qds/t1040_pbi.cfg @@ -6,7 +6,7 @@ #Configure CPC1 as 256KB SRAM 09010100 00000000 09010104 fffc0007 -09010f00 08000000 +09010f00 081e000d 09010000 80000000 #Configure LAW for CPC1 09000cf0 00000000 diff --git a/board/freescale/t104xrdb/MAINTAINERS b/board/freescale/t104xrdb/MAINTAINERS index 13d9be9..7597800 100644 --- a/board/freescale/t104xrdb/MAINTAINERS +++ b/board/freescale/t104xrdb/MAINTAINERS @@ -6,7 +6,13 @@ F: include/configs/T104xRDB.h F: configs/T1040RDB_defconfig F: configs/T1040RDB_NAND_defconfig F: configs/T1040RDB_SPIFLASH_defconfig +F: configs/T1040D4RDB_defconfig +F: configs/T1040D4RDB_NAND_defconfig +F: configs/T1040D4RDB_SPIFLASH_defconfig F: configs/T1042RDB_defconfig +F: configs/T1042D4RDB_defconfig +F: configs/T1042D4RDB_NAND_defconfig +F: configs/T1042D4RDB_SPIFLASH_defconfig F: configs/T1042RDB_PI_defconfig F: configs/T1042RDB_PI_NAND_defconfig F: configs/T1042RDB_PI_SPIFLASH_defconfig @@ -15,10 +21,14 @@ T1040RDB_SDCARD BOARD #M: - S: Maintained F: configs/T1040RDB_SDCARD_defconfig +F: configs/T1040D4RDB_SDCARD_defconfig +F: configs/T1042D4RDB_SDCARD_defconfig F: configs/T1042RDB_PI_SDCARD_defconfig T1040RDB_SECURE_BOOT BOARD M: Aneesh Bansal <aneesh.bansal@freescale.com> S: Maintained F: configs/T1040RDB_SECURE_BOOT_defconfig +F: configs/T1040D4RDB_SECURE_BOOT_defconfig F: configs/T1042RDB_SECURE_BOOT_defconfig +F: configs/T1042D4RDB_SECURE_BOOT_defconfig diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README index ac95b5e..b9d2212 100644 --- a/board/freescale/t104xrdb/README +++ b/board/freescale/t104xrdb/README @@ -12,6 +12,17 @@ The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC. (a personality of T1040 SoC). The board is similar to T1040RDB but is designed specially with low power features targeted for Printing Image Market. +The T1040D4RDB is a Freescale reference board that hosts the T1040 SoC. +The board is re-designed T1040RDB board with following changes : + - Support of DDR4 memory and some enhancements + +The T1042D4RDB is a Freescale reference board that hosts the T1042 SoC. +The board is re-designed T1040RDB board with following changes : + - Support of DDR4 memory + - Support for 0x86 serdes protocol which can support following interfaces + - 2 RGMII's on DTSEC4, DTSEC5 + - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3 + Basic difference's among T1040RDB, T1042RDB_PI, T1042RDB ------------------------------------------------------------------------- Board Si Protocol Targeted Market @@ -19,6 +30,8 @@ Board Si Protocol Targeted Market T1040RDB T1040 0x66 Networking T1040RDB T1042 0x86 Networking T1042RDB_PI T1042 0x06 Printing & Imaging +T1040D4RDB T1040 0x66 Networking +T1042D4RDB T1042 0x86 Networking T1040 SoC Overview @@ -70,7 +83,6 @@ The T1040/T1042 SoC includes the following function and features: T1040 SoC Personalities ------------------------- - T1022 Personality: T1022 is a reduced personality of T1040 with less core/clusters. @@ -268,8 +280,13 @@ SPI Flash memory Map on T104xRDB Please note QE Firmware is only valid for T1040RDB -Switch Settings: (ON is 0, OFF is 1) -=============== +Switch Settings for T104xRDB boards: (ON is 0, OFF is 1) +========================================================== +NOR boot SW setting: +SW1: 00010011 +SW2: 10111011 +SW3: 11100001 + NAND boot SW setting: SW1: 10001000 SW2: 00111011 @@ -284,3 +301,67 @@ SD boot SW setting: SW1: 00100000 SW2: 00111011 SW3: 11100001 + +Switch Settings for T104xD4RDB boards: (ON is 0, OFF is 1) +============================================================= +NOR boot SW setting: +SW1: 00010011 +SW2: 10111001 +SW3: 11100001 + +NAND boot SW setting: +SW1: 10001000 +SW2: 00111001 +SW3: 11110001 + +SPI boot SW setting: +SW1: 00100010 +SW2: 10111001 +SW3: 11100001 + +SD boot SW setting: +SW1: 00100000 +SW2: 00111001 +SW3: 11100001 + +PBL-based image generation +========================== +Changes only the required register bit in in PBI commands. + +Provides reference code which might needs some +modification as per requirement. +example: +By default PBI_SRC=14 (which is for IFC-NAND/NOR) in rcw.cfg file +which needs to be changed for SPI and SD. + +For SD-boot +============== +1. Set RCW[192:195], PBI_SRC bits as 6 in RCW file (t1040d4_rcw.cfg type files) + +example: + RCW file: board/freescale/t104xrdb/t1040d4_rcw.cfg + +Change +66000002 40000002 ec027000 01000000 +to +66000002 40000002 6c027000 01000000 + +2. SD does not support flush so remove flush from pbl, make changes in + tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000 + with 0x091380c0 + +For SPI-boot +============== +1. Set RCW[192:195], PBI_SRC bits as 5 in RCW file (t1040d4_rcw.cfg type files) + +example: + RCW file: board/freescale/t104xrdb/t1040d4_rcw.cfg + +Change +66000002 40000002 ec027000 01000000 +to +66000002 40000002 5c027000 01000000 + +2. SPI does not support flush so remove flush from pbl, make changes in + tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000 + with 0x091380c0 diff --git a/board/freescale/t104xrdb/cpld.c b/board/freescale/t104xrdb/cpld.c index df0e348..0ce4e47 100644 --- a/board/freescale/t104xrdb/cpld.c +++ b/board/freescale/t104xrdb/cpld.c @@ -69,7 +69,11 @@ static void cpld_dump_regs(void) printf("int_status = 0x%02x\n", CPLD_READ(int_status)); printf("flash_ctl_status = 0x%02x\n", CPLD_READ(flash_ctl_status)); printf("fan_ctl_status = 0x%02x\n", CPLD_READ(fan_ctl_status)); +#if defined(CONFIG_T104XD4RDB) + printf("int_mask = 0x%02x\n", CPLD_READ(int_mask)); +#else printf("led_ctl_status = 0x%02x\n", CPLD_READ(led_ctl_status)); +#endif printf("sfp_ctl_status = 0x%02x\n", CPLD_READ(sfp_ctl_status)); printf("misc_ctl_status = 0x%02x\n", CPLD_READ(misc_ctl_status)); printf("boot_override = 0x%02x\n", CPLD_READ(boot_override)); diff --git a/board/freescale/t104xrdb/cpld.h b/board/freescale/t104xrdb/cpld.h index 0da9a01..2fb4105 100644 --- a/board/freescale/t104xrdb/cpld.h +++ b/board/freescale/t104xrdb/cpld.h @@ -21,7 +21,11 @@ struct cpld_data { u8 int_status; /* 0x12 - Interrupt status Register */ u8 flash_ctl_status; /* 0x13 - Flash control and status register */ u8 fan_ctl_status; /* 0x14 - Fan control and status register */ +#if defined(CONFIG_T104XD4RDB) + u8 int_mask; /* 0x15 - Interrupt mask Register */ +#else u8 led_ctl_status; /* 0x15 - LED control and status register */ +#endif u8 sfp_ctl_status; /* 0x16 - SFP control and status register */ u8 misc_ctl_status; /* 0x17 - Miscellanies ctrl & status register*/ u8 boot_override; /* 0x18 - Boot override register */ @@ -38,3 +42,5 @@ void cpld_write(unsigned int reg, u8 value); #define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg)) #define CPLD_WRITE(reg, value)\ cpld_write(offsetof(struct cpld_data, reg), value) +#define MISC_CTL_SG_SEL 0x80 +#define MISC_CTL_AURORA_SEL 0x02 diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c index e1148e5..cf79d2d 100644 --- a/board/freescale/t104xrdb/ddr.c +++ b/board/freescale/t104xrdb/ddr.c @@ -75,7 +75,11 @@ found: * Factors to consider for half-strength driver enable: * - number of DIMMs installed */ +#ifdef CONFIG_SYS_FSL_DDR4 + popts->half_strength_driver_enable = 1; +#else popts->half_strength_driver_enable = 0; +#endif /* * Write leveling override */ @@ -91,8 +95,14 @@ found: popts->zq_en = 1; /* DHC_EN =1, ODT = 75 Ohm */ +#ifdef CONFIG_SYS_FSL_DDR4 + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_120OHM); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_120OHM) | + DDR_CDR2_VREF_OVRD(70); /* Vref = 70% */ +#else popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +#endif } #if defined(CONFIG_DEEP_SLEEP) diff --git a/board/freescale/t104xrdb/ddr.h b/board/freescale/t104xrdb/ddr.h index ab1c32d..b9c02f7 100644 --- a/board/freescale/t104xrdb/ddr.h +++ b/board/freescale/t104xrdb/ddr.h @@ -28,6 +28,9 @@ static const struct board_specific_parameters udimm0[] = { * num| hi| rank| clk| wrlvl | wrlvl * ranks| mhz| GB |adjst| start | ctl2 */ +#ifdef CONFIG_SYS_FSL_DDR4 + {2, 1600, 4, 4, 6, 0x07090A0c, 0x0e0f100a}, +#elif defined(CONFIG_SYS_FSL_DDR3) {2, 833, 4, 4, 6, 0x06060607, 0x08080807}, {2, 833, 0, 4, 6, 0x06060607, 0x08080807}, {2, 1350, 4, 4, 7, 0x0708080A, 0x0A0B0C09}, @@ -40,10 +43,14 @@ static const struct board_specific_parameters udimm0[] = { {1, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09}, {1, 1666, 4, 4, 7, 0x0808090B, 0x0C0D0E0A}, {1, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A}, +#else +#error DDR type not defined +#endif {} }; +#endif + static const struct board_specific_parameters *udimms[] = { udimm0, }; -#endif diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c index 7581a4cd..71d0457 100644 --- a/board/freescale/t104xrdb/eth.c +++ b/board/freescale/t104xrdb/eth.c @@ -43,9 +43,11 @@ int board_eth_init(bd_t *bis) int idx = i - FM1_DTSEC1; switch (fm_info_get_enet_if(i)) { -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB) case PHY_INTERFACE_MODE_SGMII: - /* T1040RDB only supports SGMII on DTSEC3 */ + /* T1040RDB & T1040D4RDB only supports SGMII on + * DTSEC3 + */ fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_SGMII1_PHY_ADDR); break; @@ -60,6 +62,20 @@ int board_eth_init(bd_t *bis) CONFIG_SYS_SGMII1_PHY_ADDR); break; #endif +#ifdef CONFIG_T1042D4RDB + case PHY_INTERFACE_MODE_SGMII: + /* T1042D4RDB supports SGMII on DTSEC1, DTSEC2 + * & DTSEC3 + */ + if (FM1_DTSEC1 == i) + phy_addr = CONFIG_SYS_SGMII1_PHY_ADDR; + if (FM1_DTSEC2 == i) + phy_addr = CONFIG_SYS_SGMII2_PHY_ADDR; + if (FM1_DTSEC3 == i) + phy_addr = CONFIG_SYS_SGMII3_PHY_ADDR; + fm_info_set_phy_address(i, phy_addr); + break; +#endif case PHY_INTERFACE_MODE_RGMII: if (FM1_DTSEC4 == i) phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR; diff --git a/board/freescale/t104xrdb/t1040d4_rcw.cfg b/board/freescale/t104xrdb/t1040d4_rcw.cfg new file mode 100644 index 0000000..c1034b3 --- /dev/null +++ b/board/freescale/t104xrdb/t1040d4_rcw.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 010e0100 +# serdes protocol 0x66 +0c18000e 0e000000 00000000 00000000 +66000002 40000002 ec027000 01000000 +00000000 00000000 00000000 00030810 +00000000 0342580f 00000000 00000000 diff --git a/board/freescale/t104xrdb/t1042d4_rcw.cfg b/board/freescale/t104xrdb/t1042d4_rcw.cfg new file mode 100644 index 0000000..9e0ee27 --- /dev/null +++ b/board/freescale/t104xrdb/t1042d4_rcw.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 010e0100 +# serdes protocol 0x86 +0c18000e 0e000000 00000000 00000000 +86000002 40000002 ec027000 01000000 +00000000 00000000 00000000 00030810 +00000000 0342500f 00000000 00000000 diff --git a/board/freescale/t104xrdb/t104x_pbi.cfg b/board/freescale/t104xrdb/t104x_pbi.cfg index b83b9b7..51945b4 100644 --- a/board/freescale/t104xrdb/t104x_pbi.cfg +++ b/board/freescale/t104xrdb/t104x_pbi.cfg @@ -16,7 +16,7 @@ #Configure CPC1 as 256KB SRAM 09010100 00000000 09010104 fffc0007 -09010f00 08000000 +09010f00 081e000d 09010000 80000000 #Configure LAW for CPC1 09000cd0 00000000 diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c index 9cd5e15..d982dfc 100644 --- a/board/freescale/t104xrdb/t104xrdb.c +++ b/board/freescale/t104xrdb/t104xrdb.c @@ -28,17 +28,18 @@ int checkboard(void) struct cpu_type *cpu = gd->arch.cpu; u8 sw; +#ifdef CONFIG_T104XD4RDB + printf("Board: %sD4RDB\n", cpu->name); +#else printf("Board: %sRDB\n", cpu->name); +#endif printf("Board rev: 0x%02x CPLD ver: 0x%02x, ", CPLD_READ(hw_ver), CPLD_READ(sw_ver)); sw = CPLD_READ(flash_ctl_status); sw = ((sw & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT); - if (sw <= 7) - printf("vBank: %d\n", sw); - else - printf("Unsupported Bank=%x\n", sw); + printf("vBank: %d\n", sw); return 0; } @@ -91,6 +92,34 @@ int board_early_init_r(void) int misc_init_r(void) { + ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_s1; + + srds_s1 = in_be32(&gur->rcwsr[4]) >> 24; + + printf("SERDES Reference : 0x%X\n", srds_s1); + + /* select SGMII*/ + if (srds_s1 == 0x86) + CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) | + MISC_CTL_SG_SEL); + + /* select SGMII and Aurora*/ + if (srds_s1 == 0x8E) + CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) | + MISC_CTL_SG_SEL | MISC_CTL_AURORA_SEL); + +#if defined(CONFIG_T1040D4RDB) + /* Mask all CPLD interrupt sources, except QSGMII interrupts */ + if (CPLD_READ(sw_ver) < 0x03) { + debug("CPLD SW version 0x%02x doesn't support int_mask\n", + CPLD_READ(sw_ver)); + } else { + CPLD_WRITE(int_mask, CPLD_INT_MASK_ALL & + ~(CPLD_INT_MASK_QSGMII1 | CPLD_INT_MASK_QSGMII2)); + } +#endif + return 0; } diff --git a/board/freescale/t4rdb/cpld.c b/board/freescale/t4rdb/cpld.c index d5f3812..d563d0d 100644 --- a/board/freescale/t4rdb/cpld.c +++ b/board/freescale/t4rdb/cpld.c @@ -47,14 +47,8 @@ void cpld_set_altbank(void) switch (curbank) { case CPLD_SELECT_BANK0: - altbank = CPLD_SELECT_BANK4; - CPLD_WRITE(vbank, altbank); - override = CPLD_READ(software_on); - CPLD_WRITE(software_on, override | CPLD_BANK_SEL_EN); - CPLD_WRITE(sys_reset, CPLD_SYSTEM_RESET); - break; case CPLD_SELECT_BANK4: - altbank = CPLD_SELECT_BANK0; + altbank = CPLD_SELECT_BANK4; CPLD_WRITE(vbank, altbank); override = CPLD_READ(software_on); CPLD_WRITE(software_on, override | CPLD_BANK_SEL_EN); diff --git a/board/maxbcm/maxbcm.c b/board/maxbcm/maxbcm.c index 2fbb90c..119ba4c 100644 --- a/board/maxbcm/maxbcm.c +++ b/board/maxbcm/maxbcm.c @@ -11,8 +11,8 @@ #include <asm/arch/soc.h> #include <linux/mbus.h> -#include "../drivers/ddr/mvebu/ddr3_hw_training.h" -#include "../arch/arm/mach-mvebu/serdes/high_speed_env_spec.h" +#include "../drivers/ddr/marvell/axp/ddr3_hw_training.h" +#include "../arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h" DECLARE_GLOBAL_DATA_PTR; diff --git a/board/nvidia/nyan-big/pinmux-config-nyan-big.h b/board/nvidia/nyan-big/pinmux-config-nyan-big.h index 9c5fbaa..9c838ba 100644 --- a/board/nvidia/nyan-big/pinmux-config-nyan-big.h +++ b/board/nvidia/nyan-big/pinmux-config-nyan-big.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -234,8 +234,8 @@ static const struct pmux_pingrp_config nyan_big_pingrps[] = { PINCFG(SDMMC4_DAT6_PAA6, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT), PINCFG(SDMMC4_DAT7_PAA7, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT), PINCFG(PBB0, VGP6, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), - PINCFG(CAM_I2C_SCL_PBB1, RSVD3, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), - PINCFG(CAM_I2C_SDA_PBB2, RSVD3, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM_I2C_SCL_PBB1, I2C3, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), + PINCFG(CAM_I2C_SDA_PBB2, I2C3, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), PINCFG(PBB3, VGP3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(PBB4, VGP4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(PBB5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), @@ -257,7 +257,7 @@ static const struct pmux_pingrp_config nyan_big_pingrps[] = { PINCFG(HDMI_CEC_PEE3, CEC, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), PINCFG(SDMMC3_CLK_LB_OUT_PEE4, SDMMC3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), PINCFG(SDMMC3_CLK_LB_IN_PEE5, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(DP_HPD_PFF0, DP, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(DP_HPD_PFF0, DP, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), PINCFG(USB_VBUS_EN2_PFF1, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), PINCFG(PFF2, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), PINCFG(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), diff --git a/board/nvidia/p2571/Kconfig b/board/nvidia/p2571/Kconfig new file mode 100644 index 0000000..7bc4874 --- /dev/null +++ b/board/nvidia/p2571/Kconfig @@ -0,0 +1,12 @@ +if TARGET_P2571 + +config SYS_BOARD + default "p2571" + +config SYS_VENDOR + default "nvidia" + +config SYS_CONFIG_NAME + default "p2571" + +endif diff --git a/board/nvidia/p2571/MAINTAINERS b/board/nvidia/p2571/MAINTAINERS new file mode 100644 index 0000000..c165135 --- /dev/null +++ b/board/nvidia/p2571/MAINTAINERS @@ -0,0 +1,6 @@ +P2571 BOARD +M: Tom Warren <twarren@nvidia.com> +S: Maintained +F: board/nvidia/p2571/ +F: include/configs/p2571.h +F: configs/p2571_defconfig diff --git a/board/nvidia/p2571/Makefile b/board/nvidia/p2571/Makefile new file mode 100644 index 0000000..223062e --- /dev/null +++ b/board/nvidia/p2571/Makefile @@ -0,0 +1,9 @@ +# +# (C) Copyright 2013-2015 +# NVIDIA Corporation <www.nvidia.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += max77620_init.o +obj-y += p2571.o diff --git a/board/nvidia/p2571/max77620_init.c b/board/nvidia/p2571/max77620_init.c new file mode 100644 index 0000000..ed8d4dc --- /dev/null +++ b/board/nvidia/p2571/max77620_init.c @@ -0,0 +1,85 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch-tegra/tegra_i2c.h> +#include "max77620_init.h" + +/* MAX77620-PMIC-specific early init code - get CPU rails up, etc */ + +void tegra_i2c_ll_write_addr(uint addr, uint config) +{ + struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; + + writel(addr, ®->cmd_addr0); + writel(config, ®->cnfg); +} + +void tegra_i2c_ll_write_data(uint data, uint config) +{ + struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; + + writel(data, ®->cmd_data1); + writel(config, ®->cnfg); +} + +void pmic_enable_cpu_vdd(void) +{ + uint reg; + debug("%s entry\n", __func__); + + /* Setup/Enable GPIO5 - VDD_CPU_REG_EN */ + debug("%s: Setting GPIO5 to enable CPU regulator\n", __func__); + /* B3=1=logic high,B2=dontcare,B1=0=output,B0=1=push-pull */ + reg = 0x0900 | MAX77620_GPIO5_REG; + tegra_i2c_ll_write_addr(MAX77620_I2C_ADDR, 2); + tegra_i2c_ll_write_data(reg, I2C_SEND_2_BYTES); + udelay(10 * 1000); + + /* Setup/Enable GPIO1 - VDD_HDMI_5V0_BST_EN */ + debug("%s: Setting GPIO1 to enable HDMI\n", __func__); + reg = 0x0900 | MAX77620_GPIO1_REG; + tegra_i2c_ll_write_addr(MAX77620_I2C_ADDR, 2); + tegra_i2c_ll_write_data(reg, I2C_SEND_2_BYTES); + udelay(10 * 1000); + + /* GPIO 0,1,5,6,7 = GPIO, 2,3,4 = alt mode */ + reg = 0x1C00 | MAX77620_AME_GPIO; + tegra_i2c_ll_write_addr(MAX77620_I2C_ADDR, 2); + tegra_i2c_ll_write_data(reg, I2C_SEND_2_BYTES); + udelay(10 * 1000); + + /* Disable SD1 Remote Sense, Set SD1 for LPDDR4 to 1.125v */ + debug("%s: Set SD1 for LPDDR4, disable SD1RS, voltage to 1.125v\n", + __func__); + /* bit1=0, SD1 remote sense disabled */ + reg = 0x0400 | MAX77620_CNFG2SD_REG; + tegra_i2c_ll_write_addr(MAX77620_I2C_ADDR, 2); + tegra_i2c_ll_write_data(reg, I2C_SEND_2_BYTES); + udelay(10 * 1000); + + /* SD1 output = 1.125V */ + reg = 0x2A00 | MAX77620_SD1_REG; + tegra_i2c_ll_write_addr(MAX77620_I2C_ADDR, 2); + tegra_i2c_ll_write_data(reg, I2C_SEND_2_BYTES); + udelay(10 * 1000); + + debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__); + /* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */ + reg = 0xF200 | MAX77620_CNFG1_L2_REG; + tegra_i2c_ll_write_addr(MAX77620_I2C_ADDR, 2); + tegra_i2c_ll_write_data(reg, I2C_SEND_2_BYTES); + udelay(10 * 1000); + + debug("%s: Set LDO1 for USB3 phy power to 1.05V??\n", __func__); + /* 0xCA for 105v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */ + reg = 0xCA00 | MAX77620_CNFG1_L1_REG; + tegra_i2c_ll_write_addr(MAX77620_I2C_ADDR, 2); + tegra_i2c_ll_write_data(reg, I2C_SEND_2_BYTES); + udelay(10 * 1000); +} diff --git a/board/nvidia/p2571/max77620_init.h b/board/nvidia/p2571/max77620_init.h new file mode 100644 index 0000000..9d5cce7 --- /dev/null +++ b/board/nvidia/p2571/max77620_init.h @@ -0,0 +1,67 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MAX77620_INIT_H_ +#define _MAX77620_INIT_H_ + +/* MAX77620-PMIC-specific early init regs */ + +#define MAX77620_I2C_ADDR 0x78 /* or 0x3C 7-bit */ + +#define MAX77620_SD0_REG 0x16 +#define MAX77620_SD1_REG 0x17 +#define MAX77620_SD2_REG 0x18 +#define MAX77620_SD3_REG 0x19 +#define MAX77620_CNFG2SD_REG 0x22 + +#define MAX77620_CNFG1_L0_REG 0x23 +#define MAX77620_CNFG2_L0_REG 0x24 +#define MAX77620_CNFG1_L1_REG 0x25 +#define MAX77620_CNFG2_L1_REG 0x26 +#define MAX77620_CNFG1_L2_REG 0x27 +#define MAX77620_CNFG2_L2_REG 0x28 +#define MAX77620_CNFG1_L3_REG 0x29 +#define MAX77620_CNFG2_L3_REG 0x2A +#define MAX77620_CNFG1_L4_REG 0x2B +#define MAX77620_CNFG2_L4_REG 0x2C +#define MAX77620_CNFG1_L5_REG 0x2D +#define MAX77620_CNFG2_L5_REG 0x2E +#define MAX77620_CNFG1_L6_REG 0x2F +#define MAX77620_CNFG2_L6_REG 0x30 +#define MAX77620_CNFG1_L7_REG 0x31 +#define MAX77620_CNFG2_L7_REG 0x32 +#define MAX77620_CNFG1_L8_REG 0x33 +#define MAX77620_CNFG2_L8_REG 0x34 +#define MAX77620_CNFG3_LDO_REG 0x35 + +#define MAX77620_GPIO0_REG 0x36 +#define MAX77620_GPIO1_REG 0x37 +#define MAX77620_GPIO2_REG 0x38 +#define MAX77620_GPIO3_REG 0x39 +#define MAX77620_GPIO4_REG 0x3A +#define MAX77620_GPIO5_REG 0x3B +#define MAX77620_GPIO6_REG 0x3C +#define MAX77620_GPIO7_REG 0x3D +#define MAX77620_GPIO_PUE_GPIO 0x3E +#define MAX77620_GPIO_PDE_GPIO 0x3F + +#define MAX77620_AME_GPIO 0x40 +#define MAX77620_REG_ONOFF_CFG1 0x41 +#define MAX77620_REG_ONOFF_CFG2 0x42 + +#define MAX77620_CID0_REG 0x58 +#define MAX77620_CID1_REG 0x59 +#define MAX77620_CID2_REG 0x5A +#define MAX77620_CID3_REG 0x5B +#define MAX77620_CID4_REG 0x5C +#define MAX77620_CID5_REG 0x5D + +#define I2C_SEND_2_BYTES 0x0A02 + +void pmic_enable_cpu_vdd(void); + +#endif /* _MAX77620_INIT_H_ */ diff --git a/board/nvidia/p2571/p2571.c b/board/nvidia/p2571/p2571.c new file mode 100644 index 0000000..fc710c1 --- /dev/null +++ b/board/nvidia/p2571/p2571.c @@ -0,0 +1,29 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include "pinmux-config-p2571.h" + +/* + * Routine: pinmux_init + * Description: Do individual peripheral pinmux configs + */ +void pinmux_init(void) +{ + pinmux_clear_tristate_input_clamping(); + + gpio_config_table(p2571_gpio_inits, + ARRAY_SIZE(p2571_gpio_inits)); + + pinmux_config_pingrp_table(p2571_pingrps, + ARRAY_SIZE(p2571_pingrps)); + + pinmux_config_drvgrp_table(p2571_drvgrps, + ARRAY_SIZE(p2571_drvgrps)); +} diff --git a/board/nvidia/p2571/pinmux-config-p2571.h b/board/nvidia/p2571/pinmux-config-p2571.h new file mode 100644 index 0000000..ac414f0 --- /dev/null +++ b/board/nvidia/p2571/pinmux-config-p2571.h @@ -0,0 +1,235 @@ +/* + * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _PINMUX_CONFIG_P2571_H_ +#define _PINMUX_CONFIG_P2571_H_ + +#define GPIO_INIT(_gpio, _init) \ + { \ + .gpio = GPIO_P##_gpio, \ + .init = TEGRA_GPIO_INIT_##_init, \ + } + +static const struct tegra_gpio_config p2571_gpio_inits[] = { + /* gpio, init_val */ + GPIO_INIT(A0, IN), + GPIO_INIT(A5, IN), + GPIO_INIT(D4, IN), + GPIO_INIT(E4, OUT0), + GPIO_INIT(G0, IN), + GPIO_INIT(H0, OUT0), + GPIO_INIT(H2, IN), + GPIO_INIT(H3, OUT0), + GPIO_INIT(H4, OUT0), + GPIO_INIT(H5, IN), + GPIO_INIT(I0, OUT0), + GPIO_INIT(I1, IN), + GPIO_INIT(V1, OUT0), + GPIO_INIT(V6, OUT1), + GPIO_INIT(X4, IN), + GPIO_INIT(X6, IN), + GPIO_INIT(X7, IN), + GPIO_INIT(Y1, IN), + GPIO_INIT(Z0, IN), + GPIO_INIT(Z4, OUT0), + GPIO_INIT(BB2, OUT0), + GPIO_INIT(CC1, IN), + GPIO_INIT(CC3, IN), +}; + +#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _e_io_hv) \ + { \ + .pingrp = PMUX_PINGRP_##_pingrp, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .od = PMUX_PIN_OD_##_od, \ + .e_io_hv = PMUX_PIN_E_IO_HV_##_e_io_hv, \ + .lock = PMUX_PIN_LOCK_DEFAULT, \ + } + +static const struct pmux_pingrp_config p2571_pingrps[] = { + /* pingrp, mux, pull, tri, e_input, od, e_io_hv */ + PINCFG(PEX_L0_RST_N_PA0, DEFAULT, UP, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(PEX_L0_CLKREQ_N_PA1, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, NORMAL), + PINCFG(PEX_WAKE_N_PA2, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, NORMAL), + PINCFG(PEX_L1_RST_N_PA3, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, NORMAL), + PINCFG(PEX_L1_CLKREQ_N_PA4, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, NORMAL), + PINCFG(SATA_LED_ACTIVE_PA5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PA6, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(DAP1_FS_PB0, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(DAP1_DIN_PB1, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(DAP1_DOUT_PB2, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(DAP1_SCLK_PB3, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPI2_MOSI_PB4, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPI2_MISO_PB5, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPI2_SCK_PB6, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPI2_CS0_PB7, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPI1_MOSI_PC0, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPI1_MISO_PC1, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPI1_SCK_PC2, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPI1_CS0_PC3, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPI1_CS1_PC4, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPI4_SCK_PC5, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPI4_CS0_PC6, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPI4_MOSI_PC7, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPI4_MISO_PD0, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART3_TX_PD1, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART3_RX_PD2, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART3_RTS_PD3, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART3_CTS_PD4, DEFAULT, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DMIC1_CLK_PE0, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DMIC1_DAT_PE1, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DMIC2_CLK_PE2, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DMIC2_DAT_PE3, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DMIC3_CLK_PE4, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(DMIC3_DAT_PE5, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PE6, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PE7, PWM3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(GEN3_I2C_SCL_PF0, I2C3, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(GEN3_I2C_SDA_PF1, I2C3, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(UART2_TX_PG0, DEFAULT, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(UART2_RX_PG1, UARTB, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART2_RTS_PG2, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART2_CTS_PG3, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(WIFI_EN_PH0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(WIFI_RST_PH1, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(WIFI_WAKE_AP_PH2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(AP_WAKE_BT_PH3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(BT_RST_PH4, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(BT_WAKE_AP_PH5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PH6, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(AP_WAKE_NFC_PH7, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(NFC_EN_PI0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(NFC_INT_PI1, DEFAULT, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(GPS_EN_PI2, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(GPS_RST_PI3, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART4_TX_PI4, UARTD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART4_RX_PI5, UARTD, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(UART4_RTS_PI6, UARTD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART4_CTS_PI7, UARTD, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(GEN1_I2C_SDA_PJ0, I2C1, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(GEN1_I2C_SCL_PJ1, I2C1, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(GEN2_I2C_SCL_PJ2, I2C2, NORMAL, NORMAL, INPUT, DISABLE, HIGH), + PINCFG(GEN2_I2C_SDA_PJ3, I2C2, NORMAL, NORMAL, INPUT, DISABLE, HIGH), + PINCFG(DAP4_FS_PJ4, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(DAP4_DIN_PJ5, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(DAP4_DOUT_PJ6, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(DAP4_SCLK_PJ7, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PK0, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PK1, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PK2, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PK3, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PK4, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PK5, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PK6, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PK7, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PL0, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PL1, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SDMMC1_CLK_PM0, SDMMC1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC1_CMD_PM1, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC1_DAT3_PM2, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC1_DAT2_PM3, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC1_DAT1_PM4, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC1_DAT0_PM5, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC3_CLK_PP0, SDMMC3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC3_CMD_PP1, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC3_DAT3_PP2, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC3_DAT2_PP3, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC3_DAT1_PP4, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC3_DAT0_PP5, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(CAM1_MCLK_PS0, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM2_MCLK_PS1, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM_I2C_SCL_PS2, I2CVI, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(CAM_I2C_SDA_PS3, I2CVI, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(CAM_RST_PS4, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM_AF_EN_PS5, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM_FLASH_EN_PS6, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM1_PWDN_PS7, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM2_PWDN_PT0, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM1_STROBE_PT1, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART1_TX_PU0, UARTA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART1_RX_PU1, UARTA, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(UART1_RTS_PU2, UARTA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART1_CTS_PU3, UARTA, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(LCD_BL_PWM_PV0, PWM0, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(LCD_BL_EN_PV1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(LCD_RST_PV2, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(LCD_GPIO1_PV3, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(LCD_GPIO2_PV4, PWM1, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(AP_READY_PV5, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(TOUCH_RST_PV6, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(TOUCH_CLK_PV7, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(MODEM_WAKE_AP_PX0, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(TOUCH_INT_PX1, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(MOTION_INT_PX2, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(ALS_PROX_INT_PX3, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(TEMP_ALERT_PX4, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(BUTTON_POWER_ON_PX5, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(BUTTON_VOL_UP_PX6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(BUTTON_VOL_DOWN_PX7, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(BUTTON_SLIDE_SW_PY0, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(BUTTON_HOME_PY1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(LCD_TE_PY2, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PWR_I2C_SCL_PY3, I2CPMU, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(PWR_I2C_SDA_PY4, I2CPMU, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(CLK_32K_OUT_PY5, SOC, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PZ0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PZ1, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PZ2, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PZ3, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PZ4, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(PZ5, SOC, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP2_FS_PAA0, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP2_SCLK_PAA1, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP2_DIN_PAA2, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP2_DOUT_PAA3, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(AUD_MCLK_PBB0, AUD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(DVFS_PWM_PBB1, CLDVFS, NORMAL, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(DVFS_CLK_PBB2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(GPIO_X1_AUD_PBB3, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(GPIO_X3_AUD_PBB4, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(HDMI_CEC_PCC0, CEC, NORMAL, NORMAL, INPUT, DISABLE, HIGH), + PINCFG(HDMI_INT_DP_HPD_PCC1, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(SPDIF_OUT_PCC2, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPDIF_IN_PCC3, DEFAULT, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(USB_VBUS_EN0_PCC4, USB, NORMAL, NORMAL, INPUT, DISABLE, HIGH), + PINCFG(USB_VBUS_EN1_PCC5, USB, NORMAL, NORMAL, INPUT, DISABLE, HIGH), + PINCFG(DP_HPD0_PCC6, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PCC7, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, NORMAL), + PINCFG(SPI2_CS1_PDD0, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(QSPI_SCK_PEE0, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(QSPI_CS_N_PEE1, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(QSPI_IO0_PEE2, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(QSPI_IO1_PEE3, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(QSPI_IO2_PEE4, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(QSPI_IO3_PEE5, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(CORE_PWR_REQ, CORE, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(PWR_INT_N, PMI, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(CLK_32K_IN, CLK, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(JTAG_RTCK, JTAG, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(CLK_REQ, SYS, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(SHUTDOWN, SHUTDOWN, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), +}; + +#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \ + { \ + .drvgrp = PMUX_DRVGRP_##_drvgrp, \ + .slwf = _slwf, \ + .slwr = _slwr, \ + .drvup = _drvup, \ + .drvdn = _drvdn, \ + .lpmd = PMUX_LPMD_##_lpmd, \ + .schmt = PMUX_SCHMT_##_schmt, \ + .hsm = PMUX_HSM_##_hsm, \ + } + +static const struct pmux_drvgrp_config p2571_drvgrps[] = { +}; + +#endif /* PINMUX_CONFIG_P2571_H */ diff --git a/board/samsung/common/Makefile b/board/samsung/common/Makefile index 93347ef..5fb01ce 100644 --- a/board/samsung/common/Makefile +++ b/board/samsung/common/Makefile @@ -6,7 +6,7 @@ # obj-$(CONFIG_SOFT_I2C_MULTI_BUS) += multi_i2c.o -obj-$(CONFIG_USBDOWNLOAD_GADGET) += gadget.o +obj-$(CONFIG_USB_GADGET_DOWNLOAD) += gadget.o obj-$(CONFIG_MISC_COMMON) += misc.o ifndef CONFIG_SPL_BUILD diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c index d81f548..6c869ed 100644 --- a/board/siemens/common/factoryset.c +++ b/board/siemens/common/factoryset.c @@ -144,7 +144,7 @@ int factoryset_read_eeprom(int i2c_addr) unsigned char eeprom_buf[0x3c00], hdr[4], buf[MAX_STRING_LENGTH]; unsigned char *cp, *cp1; -#if defined(CONFIG_DFU_FUNCTION) +#if defined(CONFIG_USB_FUNCTION_DFU) factory_dat.usb_vendor_id = CONFIG_G_DNL_VENDOR_NUM; factory_dat.usb_product_id = CONFIG_G_DNL_PRODUCT_NUM; #endif @@ -202,7 +202,7 @@ int factoryset_read_eeprom(int i2c_addr) cp1 += 3; } -#if defined(CONFIG_DFU_FUNCTION) +#if defined(CONFIG_USB_FUNCTION_DFU) /* read vid and pid for dfu mode */ if (0 <= get_factory_record_val(cp, size, (uchar *)"USBD1", (uchar *)"vid", buf, diff --git a/board/st/stm32f429-discovery/stm32f429-discovery.c b/board/st/stm32f429-discovery/stm32f429-discovery.c index 2dd5d93..f418186 100644 --- a/board/st/stm32f429-discovery/stm32f429-discovery.c +++ b/board/st/stm32f429-discovery/stm32f429-discovery.c @@ -285,3 +285,22 @@ int board_init(void) return 0; } + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ + char serialno[25]; + uint32_t u_id_low, u_id_mid, u_id_high; + + if (!getenv("serial#")) { + u_id_low = readl(&STM32_U_ID->u_id_low); + u_id_mid = readl(&STM32_U_ID->u_id_mid); + u_id_high = readl(&STM32_U_ID->u_id_high); + sprintf(serialno, "%08x%08x%08x", + u_id_high, u_id_mid, u_id_low); + setenv("serial#", serialno); + } + + return 0; +} +#endif diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 2a1cd3c..441c880 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -294,6 +294,13 @@ config USB0_VBUS_DET Set the Vbus detect pin for usb0 (otg). This takes a string in the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. +config USB0_ID_DET + string "ID detect pin for usb0 (otg)" + default "" + ---help--- + Set the ID detect pin for usb0 (otg). This takes a string in the + format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. + config USB1_VBUS_PIN string "Vbus enable pin for usb1 (ehci0)" default "PH6" if MACH_SUN4I || MACH_SUN7I diff --git a/board/sunxi/board.c b/board/sunxi/board.c index ed60e74..afed6a3 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -31,7 +31,6 @@ #include <asm/arch/usb_phy.h> #include <asm/gpio.h> #include <asm/io.h> -#include <linux/usb/musb.h> #include <net.h> #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) @@ -294,21 +293,19 @@ int board_mmc_init(bd_t *bis) return -1; #endif -#if CONFIG_MMC_SUNXI_SLOT == 0 && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2 +#if !defined(CONFIG_SPL_BUILD) && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2 /* - * Both mmc0 and mmc2 are bootable, figure out where we're booting - * from. Try mmc0 first, just like the brom does. + * On systems with an emmc (mmc2), figure out if we are booting from + * the emmc and if we are make it "mmc dev 0" so that boot.scr, etc. + * are searched there first. Note we only do this for u-boot proper, + * not for the SPL, see spl_boot_device(). */ - if (mmc_getcd(mmc0) && mmc_init(mmc0) == 0 && - mmc0->block_dev.block_read(0, 16, 1, buf) == 1) { - buf[12] = 0; - if (strcmp(&buf[4], "eGON.BT0") == 0) - return 0; + if (!sunxi_mmc_has_egon_boot_signature(mmc0) && + sunxi_mmc_has_egon_boot_signature(mmc1)) { + /* Booting from emmc / mmc2, swap */ + mmc0->block_dev.dev = 1; + mmc1->block_dev.dev = 0; } - - /* no bootable card in mmc0, so we must be booting from mmc2, swap */ - mmc0->block_dev.dev = 1; - mmc1->block_dev.dev = 0; #endif return 0; @@ -451,28 +448,6 @@ void sunxi_board_init(void) } #endif -#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET) -extern const struct musb_platform_ops sunxi_musb_ops; - -static struct musb_hdrc_config musb_config = { - .multipoint = 1, - .dyn_fifo = 1, - .num_eps = 6, - .ram_bits = 11, -}; - -static struct musb_hdrc_platform_data musb_plat = { -#if defined(CONFIG_MUSB_HOST) - .mode = MUSB_HOST, -#else - .mode = MUSB_PERIPHERAL, -#endif - .config = &musb_config, - .power = 250, - .platform_ops = &sunxi_musb_ops, -}; -#endif - #ifdef CONFIG_USB_GADGET int g_dnl_board_usb_cable_connected(void) { @@ -535,9 +510,8 @@ int misc_init_r(void) if (ret) return ret; #endif -#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET) - musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE); -#endif + sunxi_musb_board_init(); + return 0; } #endif diff --git a/board/sunxi/dram_sun4i_auto.c b/board/sunxi/dram_sun4i_auto.c index 149bb51..7d4409b 100644 --- a/board/sunxi/dram_sun4i_auto.c +++ b/board/sunxi/dram_sun4i_auto.c @@ -1,6 +1,5 @@ #include <common.h> #include <asm/arch/dram.h> -#include <linux/kconfig.h> static struct dram_para dram_para = { .clock = CONFIG_DRAM_CLK, diff --git a/board/sunxi/dram_sun5i_auto.c b/board/sunxi/dram_sun5i_auto.c index 596a206..e3fa243 100644 --- a/board/sunxi/dram_sun5i_auto.c +++ b/board/sunxi/dram_sun5i_auto.c @@ -2,7 +2,6 @@ #include <common.h> #include <asm/arch/dram.h> -#include <linux/kconfig.h> static struct dram_para dram_para = { .clock = CONFIG_DRAM_CLK, diff --git a/board/ti/ks2_evm/README b/board/ti/ks2_evm/README index 9ee90a4..6586fab 100644 --- a/board/ti/ks2_evm/README +++ b/board/ti/ks2_evm/README @@ -47,7 +47,6 @@ Board configuration files: include/configs/k2hk_evm.h include/configs/k2e_evm.h include/configs/k2l_evm.h -include/configs/k2l_evm.h As u-boot is migrating to Kconfig there is also board defconfig files configs/k2e_evm_defconfig @@ -71,7 +70,7 @@ Don't forget to add ARCH=arm and CROSS_COMPILE. To build u-boot.bin >make k2hk_evm_defconfig - >make u-boot-spi.gph + >make u-boot.bin To build u-boot-spi.gph >make k2hk_evm_defconfig diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c index 8892a28..0cefb34 100644 --- a/board/ti/ks2_evm/board.c +++ b/board/ti/ks2_evm/board.c @@ -48,7 +48,7 @@ int dram_init(void) int board_init(void) { - gd->bd->bi_boot_params = CONFIG_LINUX_BOOT_PARAM_ADDR; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; return 0; } diff --git a/board/xilinx/zynq/Makefile b/board/xilinx/zynq/Makefile index 20522fb..fd5d6fe 100644 --- a/board/xilinx/zynq/Makefile +++ b/board/xilinx/zynq/Makefile @@ -25,7 +25,7 @@ ifeq ($(init-objs),) ifneq ($(wildcard $(srctree)/$(src)/ps7_init_gpl.c),) init-objs := ps7_init_gpl.o $(if $(CONFIG_SPL_BUILD),\ -$(warning Put custom ps7_init_gpl.c/h to board/xilinx/zynq/custome_hw_platform/)) +$(warning Put custom ps7_init_gpl.c/h to board/xilinx/zynq/custom_hw_platform/)) endif endif diff --git a/board/xilinx/zynqmp/Kconfig b/board/xilinx/zynqmp/Kconfig deleted file mode 100644 index b07932e..0000000 --- a/board/xilinx/zynqmp/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_XILINX_ZYNQMP - -config SYS_BOARD - default "zynqmp" - -config SYS_VENDOR - default "xilinx" - -config SYS_SOC - default "zynqmp" - -config SYS_CONFIG_NAME - default "xilinx_zynqmp" - -endif diff --git a/board/xilinx/zynqmp/MAINTAINERS b/board/xilinx/zynqmp/MAINTAINERS index da33340..20ca652 100644 --- a/board/xilinx/zynqmp/MAINTAINERS +++ b/board/xilinx/zynqmp/MAINTAINERS @@ -1,6 +1,7 @@ -XILINX_ZYNQMP BOARD +XILINX_ZYNQMP_EP BOARD M: Michal Simek <michal.simek@xilinx.com> S: Maintained F: board/xilinx/zynqmp/ F: include/configs/xilinx_zynqmp.h -F: configs/xilinx_zynqmp_defconfig +F: include/configs/xilinx_zynqmp_ep.h +F: configs/xilinx_zynqmp_ep_defconfig diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index f5ff64d..0c9a814 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -7,6 +7,8 @@ #include <common.h> #include <netdev.h> +#include <ahci.h> +#include <scsi.h> #include <asm/arch/hardware.h> #include <asm/arch/sys_proto.h> #include <asm/io.h> @@ -15,6 +17,8 @@ DECLARE_GLOBAL_DATA_PTR; int board_init(void) { + printf("EL Level:\tEL%d\n", current_el()); + return 0; } @@ -51,6 +55,39 @@ void reset_cpu(ulong addr) { } +#ifdef CONFIG_SCSI_AHCI_PLAT +void scsi_init(void) +{ + ahci_init((void __iomem *)ZYNQMP_SATA_BASEADDR); + scsi_scan(1); +} +#endif + +int board_eth_init(bd_t *bis) +{ + u32 ret = 0; + +#if defined(CONFIG_ZYNQ_GEM) +# if defined(CONFIG_ZYNQ_GEM0) + ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0, + CONFIG_ZYNQ_GEM_PHY_ADDR0, 0); +# endif +# if defined(CONFIG_ZYNQ_GEM1) + ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1, + CONFIG_ZYNQ_GEM_PHY_ADDR1, 0); +# endif +# if defined(CONFIG_ZYNQ_GEM2) + ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR2, + CONFIG_ZYNQ_GEM_PHY_ADDR2, 0); +# endif +# if defined(CONFIG_ZYNQ_GEM3) + ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR3, + CONFIG_ZYNQ_GEM_PHY_ADDR3, 0); +# endif +#endif + return ret; +} + #ifdef CONFIG_CMD_MMC int board_mmc_init(bd_t *bd) { diff --git a/common/board_info.c b/common/board_info.c index 42d0641..4e5a1f7 100644 --- a/common/board_info.c +++ b/common/board_info.c @@ -14,8 +14,7 @@ int __weak checkboard(void) /* * If the root node of the DTB has a "model" property, show it. - * If CONFIG_OF_CONTROL is disabled or the "model" property is missing, - * fall back to checkboard(). + * Then call checkboard(). */ int show_board_info(void) { @@ -25,10 +24,8 @@ int show_board_info(void) model = fdt_getprop(gd->fdt_blob, 0, "model", NULL); - if (model) { + if (model) printf("Model: %s\n", model); - return 0; - } #endif return checkboard(); diff --git a/common/cmd_fastboot.c b/common/cmd_fastboot.c index d52ccfb..b9d1c8c 100644 --- a/common/cmd_fastboot.c +++ b/common/cmd_fastboot.c @@ -10,11 +10,26 @@ #include <common.h> #include <command.h> #include <g_dnl.h> +#include <usb.h> static int do_fastboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { + int controller_index; + char *usb_controller; int ret; + if (argc < 2) + return CMD_RET_USAGE; + + usb_controller = argv[1]; + controller_index = simple_strtoul(usb_controller, NULL, 0); + + ret = board_usb_init(controller_index, USB_INIT_DEVICE); + if (ret) { + error("USB init failed: %d", ret); + return CMD_RET_FAILURE; + } + g_dnl_clear_detach(); ret = g_dnl_register("usb_dnl_fastboot"); if (ret) @@ -23,9 +38,8 @@ static int do_fastboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) if (!g_dnl_board_usb_cable_connected()) { puts("\rUSB cable not detected.\n" \ "Command exit.\n"); - g_dnl_unregister(); - g_dnl_clear_detach(); - return CMD_RET_FAILURE; + ret = CMD_RET_FAILURE; + goto exit; } while (1) { @@ -33,17 +47,22 @@ static int do_fastboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) break; if (ctrlc()) break; - usb_gadget_handle_interrupts(0); + usb_gadget_handle_interrupts(controller_index); } + ret = CMD_RET_SUCCESS; + +exit: g_dnl_unregister(); g_dnl_clear_detach(); - return CMD_RET_SUCCESS; + board_usb_cleanup(controller_index, USB_INIT_DEVICE); + + return ret; } U_BOOT_CMD( - fastboot, 1, 0, do_fastboot, + fastboot, 2, 1, do_fastboot, "use USB Fastboot protocol", - "\n" + "<USB_controller>\n" " - run as a fastboot usb device" ); diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index 682b655..4c18962 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -45,7 +45,7 @@ void set_working_fdt_addr(ulong addr) buf = map_sysmem(addr, 0); working_fdt = buf; - setenv_ulong("fdtaddr", addr); + setenv_hex("fdtaddr", addr); } /* diff --git a/common/cmd_mp.c b/common/cmd_mp.c index 328b338..a80c642 100644 --- a/common/cmd_mp.c +++ b/common/cmd_mp.c @@ -7,11 +7,32 @@ #include <common.h> #include <command.h> +static int cpu_status_all(void) +{ + unsigned long cpuid; + + for (cpuid = 0; ; cpuid++) { + if (!is_core_valid(cpuid)) { + if (cpuid == 0) { + printf("Core num: %lu is not valid\n", cpuid); + return 1; + } + break; + } + cpu_status(cpuid); + } + + return 0; +} + static int cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned long cpuid; + if (argc == 2 && strncmp(argv[1], "status", 6) == 0) + return cpu_status_all(); + if (argc < 3) return CMD_RET_USAGE; @@ -48,6 +69,7 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_LONGHELP static char cpu_help_text[] = "<num> reset - Reset cpu <num>\n" + "cpu status - Status of all cpus\n" "cpu <num> status - Status of cpu <num>\n" "cpu <num> disable - Disable cpu <num>\n" "cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]" diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c index abf0941..080b376 100644 --- a/common/cmd_pxe.c +++ b/common/cmd_pxe.c @@ -793,8 +793,12 @@ static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label) /* Try bootm for legacy and FIT format image */ if (genimg_get_format(buf) != IMAGE_FORMAT_INVALID) do_bootm(cmdtp, 0, bootm_argc, bootm_argv); -#ifdef CONFIG_CMD_BOOTZ - /* Try booting a zImage */ +#ifdef CONFIG_CMD_BOOTI + /* Try booting an AArch64 Linux kernel image */ + else + do_booti(cmdtp, 0, bootm_argc, bootm_argv); +#elif defined(CONFIG_CMD_BOOTZ) + /* Try booting a Image */ else do_bootz(cmdtp, 0, bootm_argc, bootm_argv); #endif diff --git a/common/cmd_tsi148.c b/common/cmd_tsi148.c index dc488b2..ea96d0f 100644 --- a/common/cmd_tsi148.c +++ b/common/cmd_tsi148.c @@ -16,8 +16,8 @@ #include <tsi148.h> -#define PCI_VENDOR PCI_VENDOR_ID_TUNDRA -#define PCI_DEVICE PCI_DEVICE_ID_TUNDRA_TSI148 +#define LPCI_VENDOR PCI_VENDOR_ID_TUNDRA +#define LPCI_DEVICE PCI_DEVICE_ID_TUNDRA_TSI148 typedef struct _TSI148_DEV TSI148_DEV; @@ -41,7 +41,7 @@ int tsi148_init(void) pci_dev_t busdevfn; unsigned int val; - busdevfn = pci_find_device(PCI_VENDOR, PCI_DEVICE, 0); + busdevfn = pci_find_device(LPCI_VENDOR, LPCI_DEVICE, 0); if (busdevfn == -1) { puts("Tsi148: No Tundra Tsi148 found!\n"); return -1; @@ -68,7 +68,7 @@ int tsi148_init(void) /* check mapping */ debug("Tsi148: Read via mapping, PCI_ID = %08X\n", readl(&dev->uregs->pci_id)); - if (((PCI_DEVICE << 16) | PCI_VENDOR) != readl(&dev->uregs->pci_id)) { + if (((LPCI_DEVICE << 16) | LPCI_VENDOR) != readl(&dev->uregs->pci_id)) { printf("Tsi148: Cannot read PCI-ID via Mapping: %08x\n", readl(&dev->uregs->pci_id)); result = -1; diff --git a/common/cmd_usb.c b/common/cmd_usb.c index eab55cd..0ade775 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -22,8 +22,8 @@ #ifdef CONFIG_USB_STORAGE static int usb_stor_curr_dev = -1; /* current device */ #endif -#ifdef CONFIG_USB_HOST_ETHER -static int usb_ether_curr_dev = -1; /* current ethernet device */ +#if defined(CONFIG_USB_HOST_ETHER) && !defined(CONFIG_DM_ETH) +static int __maybe_unused usb_ether_curr_dev = -1; /* current ethernet device */ #endif /* some display routines (info command) */ @@ -355,12 +355,12 @@ static void usb_show_tree_graph(struct usb_device *dev, char *pre) #endif /* check if we are the last one */ #ifdef CONFIG_DM_USB - last_child = device_is_last_sibling(dev->dev); + /* Not the root of the usb tree? */ + if (device_get_uclass_id(dev->dev->parent) != UCLASS_USB) { + last_child = device_is_last_sibling(dev->dev); #else - last_child = (dev->parent != NULL); -#endif - if (last_child) { -#ifndef CONFIG_DM_USB + if (dev->parent != NULL) { /* not root? */ + last_child = 1; for (i = 0; i < dev->parent->maxchild; i++) { /* search for children */ if (dev->parent->children[i] == dev) { @@ -530,11 +530,14 @@ static void do_usb_start(void) /* try to recognize storage devices immediately */ usb_stor_curr_dev = usb_stor_scan(1); #endif -#endif #ifdef CONFIG_USB_HOST_ETHER +# ifdef CONFIG_DM_ETH +# error "You must use CONFIG_DM_USB if you want to use CONFIG_USB_HOST_ETHER with CONFIG_DM_ETH" +# endif /* try to recognize ethernet devices immediately */ usb_ether_curr_dev = usb_host_eth_scan(1); #endif +#endif #ifdef CONFIG_USB_KEYBOARD drv_usb_kbd_init(); #endif @@ -630,12 +633,11 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) bus; uclass_next_device(&bus)) { struct usb_device *udev; - struct udevice *hub; + struct udevice *dev; - device_find_first_child(bus, &hub); - if (device_get_uclass_id(hub) == UCLASS_USB_HUB && - device_active(hub)) { - udev = dev_get_parentdata(hub); + device_find_first_child(bus, &dev); + if (dev && device_active(dev)) { + udev = dev_get_parentdata(dev); usb_show_tree(udev); } } diff --git a/common/console.c b/common/console.c index 0058222..ace206c 100644 --- a/common/console.c +++ b/common/console.c @@ -6,6 +6,7 @@ */ #include <common.h> +#include <debug_uart.h> #include <stdarg.h> #include <iomux.h> #include <malloc.h> @@ -455,11 +456,19 @@ static inline void print_pre_console_buffer(int flushpoint) {} void putc(const char c) { #ifdef CONFIG_SANDBOX + /* sandbox can send characters to stdout before it has a console */ if (!gd || !(gd->flags & GD_FLG_SERIAL_READY)) { os_putc(c); return; } #endif +#ifdef CONFIG_DEBUG_UART + /* if we don't have a console yet, use the debug UART */ + if (!gd || !(gd->flags & GD_FLG_SERIAL_READY)) { + printch(c); + return; + } +#endif #ifdef CONFIG_SILENT_CONSOLE if (gd->flags & GD_FLG_SILENT) return; @@ -491,7 +500,18 @@ void puts(const char *s) return; } #endif +#ifdef CONFIG_DEBUG_UART + if (!gd || !(gd->flags & GD_FLG_SERIAL_READY)) { + while (*s) { + int ch = *s++; + printch(ch); + if (ch == '\n') + printch('\r'); + } + return; + } +#endif #ifdef CONFIG_SILENT_CONSOLE if (gd->flags & GD_FLG_SILENT) return; @@ -521,11 +541,6 @@ int printf(const char *fmt, ...) uint i; char printbuffer[CONFIG_SYS_PBSIZE]; -#if !defined(CONFIG_SANDBOX) && !defined(CONFIG_PRE_CONSOLE_BUFFER) - if (!gd->have_console) - return 0; -#endif - va_start(args, fmt); /* For this to work, printbuffer must be larger than diff --git a/common/exports.c b/common/exports.c index 333107c..b4f1f7a 100644 --- a/common/exports.c +++ b/common/exports.c @@ -16,6 +16,13 @@ unsigned long get_version(void) #define EXPORT_FUNC(f, a, x, ...) gd->jt->x = f; +#ifndef CONFIG_PHY_AQUANTIA +# define mdio_get_current_dev dummy +# define phy_find_by_mask dummy +# define mdio_phydev_for_ethname dummy +# define miiphy_set_current_dev dummy +#endif + void jumptable_init(void) { gd->jt = malloc(sizeof(struct jt_funcs)); diff --git a/common/fdt_support.c b/common/fdt_support.c index 10648b5..f86365e 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -454,6 +454,9 @@ int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks) return err; } + if (!banks) + return 0; + len = fdt_pack_reg(blob, tmp, start, size, banks); err = fdt_setprop(blob, nodeoffset, "reg", tmp, len); diff --git a/common/image.c b/common/image.c index f0f0135..9efacf8 100644 --- a/common/image.c +++ b/common/image.c @@ -543,6 +543,15 @@ void genimg_print_time(time_t timestamp) } #endif +const table_entry_t *get_table_entry(const table_entry_t *table, int id) +{ + for (; table->id >= 0; ++table) { + if (table->id == id) + return table; + } + return NULL; +} + /** * get_table_entry_name - translate entry id to long name * @table: pointer to a translation table for entries of a specific type @@ -559,15 +568,14 @@ void genimg_print_time(time_t timestamp) */ char *get_table_entry_name(const table_entry_t *table, char *msg, int id) { - for (; table->id >= 0; ++table) { - if (table->id == id) + table = get_table_entry(table, id); + if (!table) + return msg; #if defined(USE_HOSTCC) || !defined(CONFIG_NEEDS_MANUAL_RELOC) - return table->lname; + return table->lname; #else - return table->lname + gd->reloc_off; + return table->lname + gd->reloc_off; #endif - } - return (msg); } const char *genimg_get_os_name(uint8_t os) @@ -586,6 +594,20 @@ const char *genimg_get_type_name(uint8_t type) return (get_table_entry_name(uimage_type, "Unknown Image", type)); } +const char *genimg_get_type_short_name(uint8_t type) +{ + const table_entry_t *table; + + table = get_table_entry(uimage_type, type); + if (!table) + return "unknown"; +#if defined(USE_HOSTCC) || !defined(CONFIG_NEEDS_MANUAL_RELOC) + return table->sname; +#else + return table->sname + gd->reloc_off; +#endif +} + const char *genimg_get_comp_name(uint8_t comp) { return (get_table_entry_name(uimage_comp, "Unknown Compression", @@ -610,34 +632,18 @@ int get_table_entry_id(const table_entry_t *table, const char *table_name, const char *name) { const table_entry_t *t; -#ifdef USE_HOSTCC - int first = 1; - - for (t = table; t->id >= 0; ++t) { - if (t->sname && strcasecmp(t->sname, name) == 0) - return(t->id); - } - fprintf(stderr, "\nInvalid %s Type - valid names are", table_name); - for (t = table; t->id >= 0; ++t) { - if (t->sname == NULL) - continue; - fprintf(stderr, "%c %s", (first) ? ':' : ',', t->sname); - first = 0; - } - fprintf(stderr, "\n"); -#else for (t = table; t->id >= 0; ++t) { #ifdef CONFIG_NEEDS_MANUAL_RELOC - if (t->sname && strcmp(t->sname + gd->reloc_off, name) == 0) + if (t->sname && strcasecmp(t->sname + gd->reloc_off, name) == 0) #else - if (t->sname && strcmp(t->sname, name) == 0) + if (t->sname && strcasecmp(t->sname, name) == 0) #endif return (t->id); } debug("Invalid %s Type: %s\n", table_name, name); -#endif /* USE_HOSTCC */ - return (-1); + + return -1; } int genimg_get_os_id(const char *name) diff --git a/common/spl/spl.c b/common/spl/spl.c index aeb0645..94b01da 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -148,18 +148,12 @@ static void spl_ram_load_image(void) } #endif -void board_init_r(gd_t *dummy1, ulong dummy2) +int spl_init(void) { - u32 boot_device; int ret; - debug(">>spl:board_init_r()\n"); - -#if defined(CONFIG_SYS_SPL_MALLOC_START) - mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START, - CONFIG_SYS_SPL_MALLOC_SIZE); - gd->flags |= GD_FLG_FULL_MALLOC_INIT; -#elif defined(CONFIG_SYS_MALLOC_F_LEN) + debug("spl_init()\n"); +#if defined(CONFIG_SYS_MALLOC_F_LEN) gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN; gd->malloc_ptr = 0; #endif @@ -168,17 +162,36 @@ void board_init_r(gd_t *dummy1, ulong dummy2) ret = fdtdec_setup(); if (ret) { debug("fdtdec_setup() returned error %d\n", ret); - hang(); + return ret; } } if (IS_ENABLED(CONFIG_SPL_DM)) { ret = dm_init_and_scan(true); if (ret) { debug("dm_init_and_scan() returned error %d\n", ret); - hang(); + return ret; } } + gd->flags |= GD_FLG_SPL_INIT; + + return 0; +} +void board_init_r(gd_t *dummy1, ulong dummy2) +{ + u32 boot_device; + + debug(">>spl:board_init_r()\n"); + +#if defined(CONFIG_SYS_SPL_MALLOC_START) + mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START, + CONFIG_SYS_SPL_MALLOC_SIZE); + gd->flags |= GD_FLG_FULL_MALLOC_INIT; +#endif + if (!(gd->flags & GD_FLG_SPL_INIT)) { + if (spl_init()) + hang(); + } #ifndef CONFIG_PPC /* * timer_init() does not exist on PPC systems. The timer is initialized @@ -285,6 +298,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2) gd->malloc_ptr / 1024); #endif + debug("loaded - jumping to U-Boot..."); jump_to_image_no_args(&spl_image); } diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index 552f80d..494f683 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -7,6 +7,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <dm.h> #include <spl.h> #include <linux/compiler.h> #include <asm/u-boot.h> @@ -26,11 +27,14 @@ static int mmc_load_image_raw_sector(struct mmc *mmc, unsigned long sector) /* read image header to find the image size & load address */ count = mmc->block_dev.block_read(0, sector, 1, header); + debug("read sector %lx, count=%lu\n", sector, count); if (count == 0) goto end; - if (image_get_magic(header) != IH_MAGIC) + if (image_get_magic(header) != IH_MAGIC) { + puts("bad magic\n"); return -1; + } spl_parse_image_header(header); @@ -40,7 +44,9 @@ static int mmc_load_image_raw_sector(struct mmc *mmc, unsigned long sector) /* Read the header too to avoid extra memcpy */ count = mmc->block_dev.block_read(0, sector, image_size_sectors, - (void *) spl_image.load_addr); + (void *)spl_image.load_addr); + debug("read %x sectors to %x\n", image_size_sectors, + spl_image.load_addr); end: if (count == 0) { @@ -67,7 +73,12 @@ static int mmc_load_image_raw_partition(struct mmc *mmc, int partition) return -1; } +#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR + return mmc_load_image_raw_sector(mmc, info.start + + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR); +#else return mmc_load_image_raw_sector(mmc, info.start); +#endif } #endif @@ -96,9 +107,18 @@ void spl_mmc_load_image(void) { struct mmc *mmc; u32 boot_mode; - int err; + int err = 0; __maybe_unused int part; +#ifdef CONFIG_DM_MMC + struct udevice *dev; + + mmc_initialize(NULL); + err = uclass_get_device(UCLASS_MMC, 0, &dev); + mmc = NULL; + if (!err) + mmc = mmc_get_mmc_dev(dev); +#else mmc_initialize(gd->bd); /* We register only one device. So, the dev id is always 0 */ @@ -109,8 +129,11 @@ void spl_mmc_load_image(void) #endif hang(); } +#endif + + if (!err) + err = mmc_init(mmc); - err = mmc_init(mmc); if (err) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT printf("spl: mmc init failed with error: %d\n", err); diff --git a/common/usb.c b/common/usb.c index 7ff8ac5..fbaf8ec 100644 --- a/common/usb.c +++ b/common/usb.c @@ -911,26 +911,24 @@ __weak int usb_alloc_device(struct usb_device *udev) } #endif /* !CONFIG_DM_USB */ -#ifndef CONFIG_DM_USB -int usb_legacy_port_reset(struct usb_device *hub, int portnr) +static int usb_hub_port_reset(struct usb_device *dev, struct usb_device *hub) { if (hub) { unsigned short portstatus; int err; /* reset the port for the second time */ - err = legacy_hub_port_reset(hub, portnr - 1, &portstatus); + err = legacy_hub_port_reset(hub, dev->portnr - 1, &portstatus); if (err < 0) { - printf("\n Couldn't reset port %i\n", portnr); + printf("\n Couldn't reset port %i\n", dev->portnr); return err; } } else { - usb_reset_root_port(); + usb_reset_root_port(dev); } return 0; } -#endif static int get_descriptor_len(struct usb_device *dev, int len, int expect_len) { @@ -1032,7 +1030,7 @@ static int usb_setup_descriptor(struct usb_device *dev, bool do_read) } static int usb_prepare_device(struct usb_device *dev, int addr, bool do_read, - struct usb_device *parent, int portnr) + struct usb_device *parent) { int err; @@ -1050,7 +1048,7 @@ static int usb_prepare_device(struct usb_device *dev, int addr, bool do_read, err = usb_setup_descriptor(dev, do_read); if (err) return err; - err = usb_legacy_port_reset(parent, portnr); + err = usb_hub_port_reset(dev, parent); if (err) return err; @@ -1128,7 +1126,7 @@ int usb_select_config(struct usb_device *dev) } int usb_setup_device(struct usb_device *dev, bool do_read, - struct usb_device *parent, int portnr) + struct usb_device *parent) { int addr; int ret; @@ -1137,7 +1135,7 @@ int usb_setup_device(struct usb_device *dev, bool do_read, addr = dev->devnum; dev->devnum = 0; - ret = usb_prepare_device(dev, addr, do_read, parent, portnr); + ret = usb_prepare_device(dev, addr, do_read, parent); if (ret) return ret; ret = usb_select_config(dev); @@ -1167,7 +1165,7 @@ int usb_new_device(struct usb_device *dev) #ifdef CONFIG_USB_XHCI do_read = false; #endif - err = usb_setup_device(dev, do_read, dev->parent, dev->portnr); + err = usb_setup_device(dev, do_read, dev->parent); if (err) return err; diff --git a/common/usb_hub.c b/common/usb_hub.c index be01f4f..f621ddb 100644 --- a/common/usb_hub.c +++ b/common/usb_hub.c @@ -652,6 +652,6 @@ static const struct usb_device_id hub_id_table[] = { { } /* Terminating entry */ }; -USB_DEVICE(usb_generic_hub, hub_id_table); +U_BOOT_USB_DEVICE(usb_generic_hub, hub_id_table); #endif diff --git a/common/usb_kbd.c b/common/usb_kbd.c index e2af67d..0227024 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -540,8 +540,8 @@ int drv_usb_kbd_init(void) debug("%s: Probing for keyboard\n", __func__); #ifdef CONFIG_DM_USB /* - * TODO: We should add USB_DEVICE() declarations to each USB ethernet - * driver and then most of this file can be removed. + * TODO: We should add U_BOOT_USB_DEVICE() declarations to each USB + * keyboard driver and then most of this file can be removed. */ struct udevice *bus; struct uclass *uc; diff --git a/common/usb_storage.c b/common/usb_storage.c index cc9b3e3..b978430 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -1442,6 +1442,6 @@ static const struct usb_device_id mass_storage_id_table[] = { { } /* Terminating entry */ }; -USB_DEVICE(usb_mass_storage, mass_storage_id_table); +U_BOOT_USB_DEVICE(usb_mass_storage, mass_storage_id_table); #endif diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index 87ade90..0245bfc 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -7,11 +7,8 @@ CONFIG_SYS_CLK_FREQ=912000000 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index 5a450af..7783c7d 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -9,11 +9,8 @@ CONFIG_USB1_VBUS_PIN="PB10" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index 213ece6..dcaaff9 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -13,11 +13,8 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index d71c11c..4b43372 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -14,11 +14,8 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 6445b25..c9d0f47 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -8,12 +8,9 @@ CONFIG_USB0_VBUS_DET="PH5" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index 650670f..fb1f240 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -5,12 +5,9 @@ CONFIG_DRAM_CLK=480 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index 3f92504..a7f1395 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -9,12 +9,9 @@ CONFIG_VIDEO_VGA=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig index f94cd5a..e1262e6 100644 --- a/configs/Ainol_AW1_defconfig +++ b/configs/Ainol_AW1_defconfig @@ -19,5 +19,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig index 99aa141..2ee0307 100644 --- a/configs/Ampe_A76_defconfig +++ b/configs/Ampe_A76_defconfig @@ -18,5 +18,3 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig index 016ccd9..c019176 100644 --- a/configs/Auxtek-T004_defconfig +++ b/configs/Auxtek-T004_defconfig @@ -6,11 +6,8 @@ CONFIG_USB1_VBUS_PIN="PG13" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index 3e186f6..4b9ef35 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -6,12 +6,9 @@ CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig index 5bd2fd6..5506ab3 100644 --- a/configs/Bananapro_defconfig +++ b/configs/Bananapro_defconfig @@ -8,12 +8,9 @@ CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index 54f4846..fe88a7b 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -7,14 +7,12 @@ CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_SUNXI=y diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig index 3a2a219..cb659c9 100644 --- a/configs/Chuwi_V7_CW0825_defconfig +++ b/configs/Chuwi_V7_CW0825_defconfig @@ -18,8 +18,6 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y CONFIG_VIDEO_LCD_SPI_CS="PA0" CONFIG_VIDEO_LCD_SPI_SCLK="PA1" CONFIG_VIDEO_LCD_SPI_MOSI="PA2" diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index 9d84901..1ae8c16 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -7,13 +7,10 @@ CONFIG_USB1_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y CONFIG_AXP221_ALDO1_VOLT=3300 -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index 0fbaa23..9bcaed1 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -6,12 +6,9 @@ CONFIG_MMC0_CD_PIN="PH1" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index 0d0051e..fa60ddf 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -5,11 +5,8 @@ CONFIG_DRAM_CLK=480 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index 57a3847..b8809c8 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -7,12 +7,9 @@ CONFIG_GMAC_TX_DELAY=1 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Et_q8_v1_6_defconfig b/configs/Et_q8_v1_6_defconfig index e36895c..2783347 100644 --- a/configs/Et_q8_v1_6_defconfig +++ b/configs/Et_q8_v1_6_defconfig @@ -19,7 +19,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig index 02c657a..35c746c 100644 --- a/configs/Hummingbird_A31_defconfig +++ b/configs/Hummingbird_A31_defconfig @@ -9,13 +9,10 @@ CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y CONFIG_AXP221_ALDO1_VOLT=3300 -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig index 7800fa2..06fdd2a 100644 --- a/configs/Hyundai_A7HD_defconfig +++ b/configs/Hyundai_A7HD_defconfig @@ -20,5 +20,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y diff --git a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig index 8e26f37..fda7683 100644 --- a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig +++ b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig @@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=480 CONFIG_DRAM_ZQ=15291 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH8" CONFIG_AXP_GPIO=y CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:159,ri:160,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0" CONFIG_VIDEO_LCD_DCLK_PHASE=0 @@ -19,7 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Ippo_q8h_v1_2_defconfig b/configs/Ippo_q8h_v1_2_defconfig index ab62210..490cbe2 100644 --- a/configs/Ippo_q8h_v1_2_defconfig +++ b/configs/Ippo_q8h_v1_2_defconfig @@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=63306 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH8" CONFIG_AXP_GPIO=y CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:167,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0" CONFIG_VIDEO_LCD_DCLK_PHASE=0 @@ -19,7 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig index 312a38c..aa1eb69 100644 --- a/configs/Ippo_q8h_v5_defconfig +++ b/configs/Ippo_q8h_v5_defconfig @@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=480 CONFIG_DRAM_ZQ=63351 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH8" CONFIG_AXP_GPIO=y CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:168,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0" CONFIG_VIDEO_LCD_DCLK_PHASE=0 @@ -19,7 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig index 04ec7ab..0b64b60 100644 --- a/configs/Linksprite_pcDuino3_Nano_defconfig +++ b/configs/Linksprite_pcDuino3_Nano_defconfig @@ -8,12 +8,9 @@ CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig index 6d7690d..cced032 100644 --- a/configs/Linksprite_pcDuino3_defconfig +++ b/configs/Linksprite_pcDuino3_defconfig @@ -6,12 +6,9 @@ CONFIG_DRAM_ZQ=122 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig index ddd162f..de44890 100644 --- a/configs/Linksprite_pcDuino_defconfig +++ b/configs/Linksprite_pcDuino_defconfig @@ -5,11 +5,8 @@ CONFIG_DRAM_CLK=408 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig index a6db139..5e37485 100644 --- a/configs/MK808C_defconfig +++ b/configs/MK808C_defconfig @@ -5,11 +5,8 @@ CONFIG_DRAM_CLK=384 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig index 6e0d246..7e83536 100644 --- a/configs/MSI_Primo73_defconfig +++ b/configs/MSI_Primo73_defconfig @@ -15,7 +15,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index 9787e34..b3b21cb 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -18,8 +18,6 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27 CONFIG_VIDEO_LCD_SSD2828_RESET="PA26" @@ -27,4 +25,3 @@ CONFIG_VIDEO_LCD_SPI_CS="PH9" CONFIG_VIDEO_LCD_SPI_SCLK="PH10" CONFIG_VIDEO_LCD_SPI_MOSI="PH11" CONFIG_VIDEO_LCD_SPI_MISO="PH12" -CONFIG_USB=y diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig index ed41af6..4933659 100644 --- a/configs/Marsboard_A10_defconfig +++ b/configs/Marsboard_A10_defconfig @@ -4,11 +4,8 @@ CONFIG_MACH_SUN4I=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig index 6e0a493..ffc8d9b 100644 --- a/configs/Mele_A1000G_quad_defconfig +++ b/configs/Mele_A1000G_quad_defconfig @@ -7,16 +7,14 @@ CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y CONFIG_AXP221_DCDC1_VOLT=3300 CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_DLDO4_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_SUNXI=y diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index 983ffdc..5e66d43 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -5,11 +5,8 @@ CONFIG_VIDEO_VGA=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig index 7f083a7..774a92f 100644 --- a/configs/Mele_I7_defconfig +++ b/configs/Mele_I7_defconfig @@ -7,16 +7,13 @@ CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y CONFIG_AXP221_DCDC1_VOLT=3300 CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_DLDO4_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index 73d87c3..d498269 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -8,12 +8,9 @@ CONFIG_VIDEO_VGA=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig index 79c5901..40f5daa 100644 --- a/configs/Mele_M5_defconfig +++ b/configs/Mele_M5_defconfig @@ -7,12 +7,9 @@ CONFIG_MMC0_CD_PIN="PH1" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,USB_EHCI,STATUSLED=234" +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,STATUSLED=234" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index e017ad7..b52e3c2 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -7,16 +7,13 @@ CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y CONFIG_AXP221_DCDC1_VOLT=3300 CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_DLDO4_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig index b02b1a3..8587bc8 100644 --- a/configs/Merrii_A80_Optimus_defconfig +++ b/configs/Merrii_A80_Optimus_defconfig @@ -12,7 +12,3 @@ CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index da57711..c721c87 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -4,11 +4,10 @@ CONFIG_MACH_SUN4I=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB0_VBUS_PIN="PB9" diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig index ba89a25..f9408b1 100644 --- a/configs/Orangepi_defconfig +++ b/configs/Orangepi_defconfig @@ -9,12 +9,9 @@ CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig index 8f03815..1dc0e76 100644 --- a/configs/Orangepi_mini_defconfig +++ b/configs/Orangepi_mini_defconfig @@ -11,12 +11,9 @@ CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/P3041DS_NAND_SECURE_BOOT_defconfig b/configs/P3041DS_NAND_SECURE_BOOT_defconfig new file mode 100644 index 0000000..2f18bc1 --- /dev/null +++ b/configs/P3041DS_NAND_SECURE_BOOT_defconfig @@ -0,0 +1,5 @@ +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SECURE_BOOT,SYS_TEXT_BASE=0xFFF40000" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_P3041DS=y +CONFIG_SPI_FLASH=y diff --git a/configs/P5020DS_NAND_SECURE_BOOT_defconfig b/configs/P5020DS_NAND_SECURE_BOOT_defconfig new file mode 100644 index 0000000..98cdd35 --- /dev/null +++ b/configs/P5020DS_NAND_SECURE_BOOT_defconfig @@ -0,0 +1,5 @@ +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SECURE_BOOT,SYS_TEXT_BASE=0xFFF40000" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_P5020DS=y +CONFIG_SPI_FLASH=y diff --git a/configs/P5040DS_NAND_SECURE_BOOT_defconfig b/configs/P5040DS_NAND_SECURE_BOOT_defconfig new file mode 100644 index 0000000..a6cc7c4 --- /dev/null +++ b/configs/P5040DS_NAND_SECURE_BOOT_defconfig @@ -0,0 +1,5 @@ +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SECURE_BOOT,SYS_TEXT_BASE=0xFFF40000" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_P5040DS=y +CONFIG_SPI_FLASH=y diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig index e9e62da..720f3dc 100644 --- a/configs/Sinlinx_SinA33_defconfig +++ b/configs/Sinlinx_SinA33_defconfig @@ -9,8 +9,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y CONFIG_AXP221_ALDO1_VOLT=3000 -CONFIG_USB=y -CONFIG_DM_USB=y diff --git a/configs/T1040D4RDB_NAND_defconfig b/configs/T1040D4RDB_NAND_defconfig new file mode 100644 index 0000000..3051f0c --- /dev/null +++ b/configs/T1040D4RDB_NAND_defconfig @@ -0,0 +1,6 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_T104XRDB=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1040D4RDB_SDCARD_defconfig b/configs/T1040D4RDB_SDCARD_defconfig new file mode 100644 index 0000000..6c10c50 --- /dev/null +++ b/configs/T1040D4RDB_SDCARD_defconfig @@ -0,0 +1,6 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_T104XRDB=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1040D4RDB_SECURE_BOOT_defconfig b/configs/T1040D4RDB_SECURE_BOOT_defconfig new file mode 100644 index 0000000..f779126 --- /dev/null +++ b/configs/T1040D4RDB_SECURE_BOOT_defconfig @@ -0,0 +1,5 @@ +CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,T104XD4RDB,SYS_FSL_DDR4,SECURE_BOOT" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_T104XRDB=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1040D4RDB_SPIFLASH_defconfig b/configs/T1040D4RDB_SPIFLASH_defconfig new file mode 100644 index 0000000..6614e34 --- /dev/null +++ b/configs/T1040D4RDB_SPIFLASH_defconfig @@ -0,0 +1,6 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_T104XRDB=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1040D4RDB_defconfig b/configs/T1040D4RDB_defconfig new file mode 100644 index 0000000..ce0cfa3 --- /dev/null +++ b/configs/T1040D4RDB_defconfig @@ -0,0 +1,5 @@ +CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_T104XRDB=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1042D4RDB_NAND_defconfig b/configs/T1042D4RDB_NAND_defconfig new file mode 100644 index 0000000..fa4c250 --- /dev/null +++ b/configs/T1042D4RDB_NAND_defconfig @@ -0,0 +1,6 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_T104XRDB=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1042D4RDB_SDCARD_defconfig b/configs/T1042D4RDB_SDCARD_defconfig new file mode 100644 index 0000000..12644d6 --- /dev/null +++ b/configs/T1042D4RDB_SDCARD_defconfig @@ -0,0 +1,6 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_T104XRDB=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1042D4RDB_SECURE_BOOT_defconfig b/configs/T1042D4RDB_SECURE_BOOT_defconfig new file mode 100644 index 0000000..e806591 --- /dev/null +++ b/configs/T1042D4RDB_SECURE_BOOT_defconfig @@ -0,0 +1,5 @@ +CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,T104XD4RDB,SYS_FSL_DDR4,SECURE_BOOT" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_T104XRDB=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1042D4RDB_SPIFLASH_defconfig b/configs/T1042D4RDB_SPIFLASH_defconfig new file mode 100644 index 0000000..2504499 --- /dev/null +++ b/configs/T1042D4RDB_SPIFLASH_defconfig @@ -0,0 +1,6 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_T104XRDB=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1042D4RDB_defconfig b/configs/T1042D4RDB_defconfig new file mode 100644 index 0000000..3df7496 --- /dev/null +++ b/configs/T1042D4RDB_defconfig @@ -0,0 +1,5 @@ +CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_T104XRDB=y +CONFIG_SPI_FLASH=y diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig index 68961fc..6a716bd 100644 --- a/configs/TZX-Q8-713B7_defconfig +++ b/configs/TZX-Q8-713B7_defconfig @@ -18,5 +18,3 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig index c3b13b7..d59a044 100644 --- a/configs/UTOO_P66_defconfig +++ b/configs/UTOO_P66_defconfig @@ -23,4 +23,4 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y +# CONFIG_REQUIRE_SERIAL_CONSOLE is not set diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig index d9180c7..eadceb2 100644 --- a/configs/Wexler_TAB7200_defconfig +++ b/configs/Wexler_TAB7200_defconfig @@ -9,11 +9,8 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig index bb8dd29..66b51bc 100644 --- a/configs/Wits_Pro_A20_DKT_defconfig +++ b/configs/Wits_Pro_A20_DKT_defconfig @@ -11,12 +11,9 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wits-pro-a20-dkt" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig index aab580e..22b51a2 100644 --- a/configs/Yones_Toptech_BD1078_defconfig +++ b/configs/Yones_Toptech_BD1078_defconfig @@ -24,5 +24,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index 4589b30..c72d29e 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_AM3517_EVM=y CONFIG_SPL=y +CONFIG_FIT=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index c84e82e..ae302c5 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -7,11 +7,10 @@ CONFIG_USB2_VBUS_PIN="PH12" CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB0_VBUS_PIN="PB9" diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig index 9931d65..e394dab 100644 --- a/configs/chromebook_link_defconfig +++ b/configs/chromebook_link_defconfig @@ -17,5 +17,6 @@ CONFIG_SPI_FLASH=y CONFIG_VIDEO_VESA=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_11A=y +CONFIG_DM_RTC=y CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_SYS_VSNPRINTF=y diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig index b3a5f28..340510f 100644 --- a/configs/chromebox_panther_defconfig +++ b/configs/chromebox_panther_defconfig @@ -17,5 +17,6 @@ CONFIG_SPI_FLASH=y CONFIG_VIDEO_VESA=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_11A=y +CONFIG_DM_RTC=y CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_SYS_VSNPRINTF=y diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig index 17e6a72..aa1232d 100644 --- a/configs/crownbay_defconfig +++ b/configs/crownbay_defconfig @@ -17,6 +17,7 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y CONFIG_CPU=y +CONFIG_DM_PCI=y CONFIG_SPI_FLASH=y CONFIG_VIDEO_VESA=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y diff --git a/configs/db-88f6820-gp_defconfig b/configs/db-88f6820-gp_defconfig index 569ddfd..0ff6706 100644 --- a/configs/db-88f6820-gp_defconfig +++ b/configs/db-88f6820-gp_defconfig @@ -1,3 +1,4 @@ +CONFIG_SPL=y CONFIG_ARM=y CONFIG_TARGET_DB_88F6820_GP=y # CONFIG_CMD_IMLS is not set diff --git a/configs/forfun_q88db_defconfig b/configs/forfun_q88db_defconfig index 85c807a..8f10c25 100644 --- a/configs/forfun_q88db_defconfig +++ b/configs/forfun_q88db_defconfig @@ -17,5 +17,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index 315627d..e766db4 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -6,6 +6,7 @@ CONFIG_DRAM_ZQ=15291 CONFIG_DRAM_ODT_EN=y CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH8" CONFIG_AXP_GPIO=y CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0" CONFIG_VIDEO_LCD_DCLK_PHASE=0 @@ -21,7 +22,6 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 +CONFIG_USB_EHCI_HCD=y diff --git a/configs/galileo_defconfig b/configs/galileo_defconfig index 1ced47e..3f80483 100644 --- a/configs/galileo_defconfig +++ b/configs/galileo_defconfig @@ -15,5 +15,6 @@ CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_SPI_FLASH=y CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_RTC=y CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_SYS_VSNPRINTF=y diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig index 3a69422..99e78ba 100644 --- a/configs/i12-tvbox_defconfig +++ b/configs/i12-tvbox_defconfig @@ -5,12 +5,9 @@ CONFIG_DRAM_CLK=384 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig index 54de300..c4611cf 100644 --- a/configs/iNet_3F_defconfig +++ b/configs/iNet_3F_defconfig @@ -19,5 +19,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig index e1beac8..d75eb21 100644 --- a/configs/iNet_3W_defconfig +++ b/configs/iNet_3W_defconfig @@ -19,5 +19,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig index 627e211..b9f2066 100644 --- a/configs/iNet_86VS_defconfig +++ b/configs/iNet_86VS_defconfig @@ -17,5 +17,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig index 4b09a33..a2115b6 100644 --- a/configs/jesurun_q5_defconfig +++ b/configs/jesurun_q5_defconfig @@ -5,11 +5,8 @@ CONFIG_DRAM_CLK=312 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,MACPWR=SUNXI_GPH(19)" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(19)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/ls2085aqds_defconfig b/configs/ls2085aqds_defconfig index fd208b18..00b062b 100644 --- a/configs/ls2085aqds_defconfig +++ b/configs/ls2085aqds_defconfig @@ -1,4 +1,11 @@ CONFIG_ARM=y CONFIG_TARGET_LS2085AQDS=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2085a-qds" +# CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" # CONFIG_CMD_SETEXPR is not set +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_DM_SPI_FLASH=y +CONFIG_DM_SPI=y +CONFIG_FSL_DSPI=y diff --git a/configs/ls2085ardb_defconfig b/configs/ls2085ardb_defconfig index 308e935..c7dae4b 100644 --- a/configs/ls2085ardb_defconfig +++ b/configs/ls2085ardb_defconfig @@ -1,4 +1,11 @@ CONFIG_ARM=y CONFIG_TARGET_LS2085ARDB=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2085a-rdb" +# CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" # CONFIG_CMD_SETEXPR is not set +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_DM_SPI_FLASH=y +CONFIG_DM_SPI=y +CONFIG_FSL_DSPI=y diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig index 29dd44b..e98f5eb 100644 --- a/configs/minnowmax_defconfig +++ b/configs/minnowmax_defconfig @@ -21,5 +21,6 @@ CONFIG_SPI_FLASH=y CONFIG_VIDEO_VESA=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_11A=y +CONFIG_DM_RTC=y CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_SYS_VSNPRINTF=y diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig index a8c497c..26fc4ce 100644 --- a/configs/mixtile_loftq_defconfig +++ b/configs/mixtile_loftq_defconfig @@ -8,13 +8,10 @@ CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y CONFIG_AXP221_ALDO1_VOLT=3300 -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig index dc78fa4..db437f0 100644 --- a/configs/mk802_a10s_defconfig +++ b/configs/mk802_a10s_defconfig @@ -7,11 +7,8 @@ CONFIG_USB1_VBUS_PIN="PB10" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-mk802" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig index 31bde00..68b2c5e 100644 --- a/configs/mk802_defconfig +++ b/configs/mk802_defconfig @@ -9,7 +9,4 @@ CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig index ffa7891..d3cb664 100644 --- a/configs/mk802ii_defconfig +++ b/configs/mk802ii_defconfig @@ -4,11 +4,8 @@ CONFIG_MACH_SUN4I=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/p2571_defconfig b/configs/p2571_defconfig new file mode 100644 index 0000000..8494bb5 --- /dev/null +++ b/configs/p2571_defconfig @@ -0,0 +1,16 @@ +CONFIG_ARM=y +CONFIG_TEGRA=y +CONFIG_TEGRA210=y +CONFIG_TARGET_P2571=y +CONFIG_DEFAULT_DEVICE_TREE="tegra210-p2571" +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +CONFIG_SPL_DM=y +CONFIG_SPI_FLASH=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig index a71511c..f84dcdf 100644 --- a/configs/ph1_ld4_defconfig +++ b/configs/ph1_ld4_defconfig @@ -4,8 +4,6 @@ CONFIG_MACH_PH1_LD4=y CONFIG_PFC_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref" -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_ENV_EXISTS is not set diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig index d02712e..2fc844d 100644 --- a/configs/ph1_pro4_defconfig +++ b/configs/ph1_pro4_defconfig @@ -3,8 +3,6 @@ CONFIG_ARCH_UNIPHIER=y CONFIG_PFC_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref" -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_ENV_EXISTS is not set diff --git a/configs/ph1_sld3_defconfig b/configs/ph1_sld3_defconfig new file mode 100644 index 0000000..386a0d1 --- /dev/null +++ b/configs/ph1_sld3_defconfig @@ -0,0 +1,28 @@ +CONFIG_ARM=y +CONFIG_ARCH_UNIPHIER=y +CONFIG_MACH_PH1_SLD3=y +CONFIG_PFC_MICRO_SUPPORT_CARD=y +CONFIG_SYS_TEXT_BASE=0x84000000 +CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld3-ref" +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_ENV_EXISTS is not set +CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +# CONFIG_CMD_MISC is not set +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_NAND_DENALI=y +CONFIG_SYS_NAND_DENALI_64BIT=y +CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 +CONFIG_SPL_NAND_DENALI=y +CONFIG_UNIPHIER_SERIAL=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig index ee4cebc..2af45d2 100644 --- a/configs/ph1_sld8_defconfig +++ b/configs/ph1_sld8_defconfig @@ -4,8 +4,6 @@ CONFIG_MACH_PH1_SLD8=y CONFIG_PFC_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld8-ref" -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_ENV_EXISTS is not set diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index 5639cc5..4b18d51 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -1,6 +1,8 @@ CONFIG_X86=y CONFIG_DEFAULT_DEVICE_TREE="qemu-x86_i440fx" CONFIG_GENERATE_PIRQ_TABLE=y +CONFIG_GENERATE_MP_TABLE=y +CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set @@ -9,9 +11,11 @@ CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y +CONFIG_CPU=y CONFIG_SPI_FLASH=y CONFIG_VIDEO_VESA=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_111=y +CONFIG_DM_RTC=y CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_SYS_VSNPRINTF=y diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig index ac7928d..62c58fc 100644 --- a/configs/r7-tv-dongle_defconfig +++ b/configs/r7-tv-dongle_defconfig @@ -6,11 +6,8 @@ CONFIG_USB1_VBUS_PIN="PG13" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-r7-tv-dongle" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index 598519d..5535746 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -18,6 +18,7 @@ CONFIG_PCI_SANDBOX=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SANDBOX=y CONFIG_CMD_CROS_EC=y +CONFIG_CMD_DHRYSTONE=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SANDBOX=y CONFIG_DM_ETH=y @@ -44,3 +45,10 @@ CONFIG_UNIT_TEST=y CONFIG_UT_TIME=y CONFIG_UT_DM=y CONFIG_UT_ENV=y +CONFIG_CLK=y +CONFIG_RESET=y +CONFIG_RAM=y +CONFIG_DM_MMC=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_SYSCON=y diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig index e95cbe4..d0f987c 100644 --- a/configs/sunxi_Gemei_G9_defconfig +++ b/configs/sunxi_Gemei_G9_defconfig @@ -11,11 +11,8 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_DM_ETH=y -CONFIG_DM_SERIAL=y -CONFIG_USB=y -CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y diff --git a/configs/xilinx_zynqmp_defconfig b/configs/xilinx_zynqmp_ep_defconfig index 1c64eea..fda44ea 100644 --- a/configs/xilinx_zynqmp_defconfig +++ b/configs/xilinx_zynqmp_ep_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y -CONFIG_TARGET_XILINX_ZYNQMP=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp" +CONFIG_ARCH_ZYNQMP=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-ep" # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set @@ -15,3 +15,4 @@ CONFIG_DEFAULT_DEVICE_TREE="zynqmp" # CONFIG_CMD_NFS is not set CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y +CONFIG_SYS_TEXT_BASE=0x8000000 diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig new file mode 100644 index 0000000..8f9221d --- /dev/null +++ b/configs/zynq_zc770_xm011_defconfig @@ -0,0 +1,13 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQ=y +CONFIG_TARGET_ZYNQ_ZC770=y +CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm011" +# CONFIG_SYS_MALLOC_F is not set +CONFIG_SPL=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_FIT_SIGNATURE=y +CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM011" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/doc/README.android-fastboot b/doc/README.android-fastboot index 04411e9..ce12bc5 100644 --- a/doc/README.android-fastboot +++ b/doc/README.android-fastboot @@ -33,7 +33,7 @@ Board specific The fastboot gadget relies on the USB download gadget, so the following options must be configured: -CONFIG_USBDOWNLOAD_GADGET +CONFIG_USB_GADGET_DOWNLOAD CONFIG_G_DNL_VENDOR_NUM CONFIG_G_DNL_PRODUCT_NUM CONFIG_G_DNL_MANUFACTURER @@ -42,13 +42,13 @@ NOTE: The CONFIG_G_DNL_VENDOR_NUM must be one of the numbers supported by the fastboot client. The list of vendor IDs supported can be found in the fastboot client source code (fastboot.c) mentioned above. -The fastboot function is enabled by defining CONFIG_CMD_FASTBOOT and -CONFIG_ANDROID_BOOT_IMAGE. +The fastboot function is enabled by defining CONFIG_USB_FUNCTION_FASTBOOT, +CONFIG_CMD_FASTBOOT and CONFIG_ANDROID_BOOT_IMAGE. The fastboot protocol requires a large memory buffer for downloads. This buffer should be as large as possible for a platform. The location of the -buffer and size are set with CONFIG_USB_FASTBOOT_BUF_ADDR and -CONFIG_USB_FASTBOOT_BUF_SIZE. +buffer and size are set with CONFIG_FASTBOOT_BUF_ADDR and +CONFIG_FASTBOOT_BUF_SIZE. Fastboot partition aliases can also be defined for devices where GPT limitations prevent user-friendly partition names such as "boot", "system" diff --git a/doc/README.b4860qds b/doc/README.b4860qds index eada0c7..6fcc3bd 100644 --- a/doc/README.b4860qds +++ b/doc/README.b4860qds @@ -119,7 +119,7 @@ B4860QDS Default Settings Switch Settings ---------------- -SW1 OFF [0] OFF [1] OFF [1] OFF [0] OFF [1] OFF [0] OFF [1] OFF [1] +SW1 OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] SW2 ON ON ON ON ON ON OFF OFF SW3 OFF OFF OFF ON OFF OFF ON OFF SW5 OFF OFF OFF OFF OFF OFF ON ON diff --git a/doc/README.uniphier b/doc/README.uniphier index 4902533..52d681b 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -28,14 +28,18 @@ Tested toolchains Compile the source ------------------ -PH1-Pro4: - $ make ph1_pro4_defconfig +PH1-sLD3: + $ make ph1_sld3_defconfig $ make CROSS_COMPILE=arm-linux-gnueabi- PH1-LD4: $ make ph1_ld4_defconfig $ make CROSS_COMPILE=arm-linux-gnueabi- +PH1-Pro4: + $ make ph1_pro4_defconfig + $ make CROSS_COMPILE=arm-linux-gnueabi- + PH1-sLD8: $ make ph1_sld8_defconfig $ make CROSS_COMPILE=arm-linux-gnueabi- @@ -81,6 +85,48 @@ Supported devices - Support card (SRAM, NOR flash, some peripherals) +Micro Support Card +------------------ + +The recommended bit switch settings are as follows: + + SW2 OFF(1)/ON(0) Description + ------------------------------------------ + bit 1 <---- BKSZ[0] + bit 2 ----> BKSZ[1] + bit 3 <---- SoC Bus Width 16/32 + bit 4 <---- SERIAL_SEL[0] + bit 5 ----> SERIAL_SEL[1] + bit 6 ----> BOOTSWAP_EN + bit 7 <---- CS1/CS5 + bit 8 <---- SOC_SERIAL_DISABLE + + SW8 OFF(1)/ON(0) Description + ------------------------------------------ + bit 1 ----> CS1_SPLIT + bit 2 <---- CASE9_ON + bit 3 <---- CASE10_ON + bit 4 Don't Care Reserve + bit 5 Don't Care Reserve + bit 6 Don't Care Reserve + bit 7 ----> BURST_EN + bit 8 ----> FLASHBUS32_16 + +The BKSZ[1:0] specifies the address range of memory slot and peripherals +as follows: + + BKSZ Description RAM slot Peripherals + -------------------------------------------------------------------- + 0b00 15MB RAM / 1MB Peri 00000000-0effffff 0f000000-0fffffff + 0b01 31MB RAM / 1MB Peri 00000000-1effffff 1f000000-1fffffff + 0b10 64MB RAM / 1MB Peri 00000000-3effffff 3f000000-3fffffff + 0b11 127MB RAM / 1MB Peri 00000000-7effffff 7f000000-7fffffff + +Set BSKZ[1:0] to 0b01 for U-Boot. +This mode is the most handy because EA[24] is always supported by the save pin +mode of the system bus. On the other hand, EA[25] is not supported for some +newer SoCs. Even if it is, EA[25] is not connected on most of the boards. + -- -Masahiro Yamada <yamada.m@jp.panasonic.com> -Feb. 2015 +Masahiro Yamada <yamada.masahiro@socionext.com> +Jul. 2015 diff --git a/doc/device-tree-bindings/leds/common.txt b/doc/device-tree-bindings/leds/common.txt new file mode 100644 index 0000000..2d88816 --- /dev/null +++ b/doc/device-tree-bindings/leds/common.txt @@ -0,0 +1,23 @@ +Common leds properties. + +Optional properties for child nodes: +- label : The label for this LED. If omitted, the label is + taken from the node name (excluding the unit address). + +- linux,default-trigger : This parameter, if present, is a + string defining the trigger assigned to the LED. Current triggers are: + "backlight" - LED will act as a back-light, controlled by the framebuffer + system + "default-on" - LED will turn on (but for leds-gpio see "default-state" + property in Documentation/devicetree/bindings/gpio/led.txt) + "heartbeat" - LED "double" flashes at a load average based rate + "ide-disk" - LED indicates disk activity + "timer" - LED flashes at a fixed, configurable rate + +Examples: + +system-status { + label = "Status"; + linux,default-trigger = "heartbeat"; + ... +}; diff --git a/doc/device-tree-bindings/leds/leds-gpio.txt b/doc/device-tree-bindings/leds/leds-gpio.txt new file mode 100644 index 0000000..df1b308 --- /dev/null +++ b/doc/device-tree-bindings/leds/leds-gpio.txt @@ -0,0 +1,52 @@ +LEDs connected to GPIO lines + +Required properties: +- compatible : should be "gpio-leds". + +Each LED is represented as a sub-node of the gpio-leds device. Each +node's name represents the name of the corresponding LED. + +LED sub-node properties: +- gpios : Should specify the LED's GPIO, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs should be + indicated using flags in the GPIO specifier. +- label : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- default-state: (optional) The initial state of the LED. Valid + values are "on", "off", and "keep". If the LED is already on or off + and the default-state property is set the to same value, then no + glitch should be produced where the LED momentarily turns off (or + on). The "keep" setting will keep the LED at whatever its current + state is, without producing a glitch. The default is off if this + property is not present. + +Examples: + +leds { + compatible = "gpio-leds"; + hdd { + label = "IDE Activity"; + gpios = <&mcu_pio 0 1>; /* Active low */ + linux,default-trigger = "ide-disk"; + }; + + fault { + gpios = <&mcu_pio 1 0>; + /* Keep LED on if BIOS detected hardware fault */ + default-state = "keep"; + }; +}; + +run-control { + compatible = "gpio-leds"; + red { + gpios = <&mpc8572 6 0>; + default-state = "off"; + }; + green { + gpios = <&mpc8572 7 0>; + default-state = "on"; + }; +}; diff --git a/doc/device-tree-bindings/spi/spi-zynq.txt b/doc/device-tree-bindings/spi/spi-zynq.txt index f397a36..cb29457 100644 --- a/doc/device-tree-bindings/spi/spi-zynq.txt +++ b/doc/device-tree-bindings/spi/spi-zynq.txt @@ -1,29 +1,32 @@ -Zynq SPI controller Device Tree Bindings ----------------------------------------- +Cadence SPI controller Device Tree Bindings +------------------------------------------- Required properties: -- compatible : Should be "xlnx,spi-zynq". +- compatible : Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6". - reg : Physical base address and size of SPI registers map. -- status : Status will be disabled in dtsi and enabled in required dts. -- interrupt-parent : Must be core interrupt controller. - interrupts : Property with a value describing the interrupt number. -- clocks : Clock phandles (see clock bindings for details). +- interrupt-parent : Must be core interrupt controller - clock-names : List of input clock names - "ref_clk", "pclk" (See clock bindings for details). +- clocks : Clock phandles (see clock bindings for details). - spi-max-frequency : Maximum SPI clocking speed of device in Hz +Optional properties: +- num-cs : Number of chip selects used. + If a decoder is used, this will be the number of + chip selects after the decoder. +- is-decoded-cs : Flag to indicate whether decoder is used or not. + Example: - spi@e0006000 { - compatible = "xlnx,zynq-spi"; - reg = <0xe0006000 0x1000>; - status = "disabled"; - interrupt-parent = <&intc>; - interrupts = <0 26 4>; - clocks = <&clkc 25>, <&clkc 34>; + spi@e0007000 { + compatible = "xlnx,zynq-spi-r1p6"; clock-names = "ref_clk", "pclk"; - spi-max-frequency = <166666700>; - #address-cells = <1>; - #size-cells = <0>; + clocks = <&clkc 26>, <&clkc 35>; + interrupt-parent = <&intc>; + interrupts = <0 49 4>; + num-cs = <4>; + is-decoded-cs = <0>; + reg = <0xe0007000 0x1000>; } ; diff --git a/doc/driver-model/README.txt b/doc/driver-model/README.txt index f0276b1..b891e84 100644 --- a/doc/driver-model/README.txt +++ b/doc/driver-model/README.txt @@ -301,6 +301,15 @@ device tree) and probe. Platform Data ------------- +*** Note: platform data is the old way of doing things. It is +*** basically a C structure which is passed to drivers to tell them about +*** platform-specific settings like the address of its registers, bus +*** speed, etc. Device tree is now the preferred way of handling this. +*** Unless you have a good reason not to use device tree (the main one +*** being you need serial support in SPL and don't have enough SRAM for +*** the cut-down device tree and libfdt libraries) you should stay away +*** from platform data. + Platform data is like Linux platform data, if you are familiar with that. It provides the board-specific information to start up a device. @@ -366,8 +375,12 @@ Device Tree ----------- While platdata is useful, a more flexible way of providing device data is -by using device tree. With device tree we replace the above code with the -following device tree fragment: +by using device tree. In U-Boot you should use this where possible. Avoid +sending patches which make use of the U_BOOT_DEVICE() macro unless strictly +necessary. + +With device tree we replace the above code with the following device tree +fragment: red-square { compatible = "demo-shape"; diff --git a/drivers/Kconfig b/drivers/Kconfig index c7e526c..092bc02 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -1,5 +1,7 @@ menu "Device Drivers" +source "drivers/clk/Kconfig" + source "drivers/core/Kconfig" source "drivers/cpu/Kconfig" @@ -20,6 +22,8 @@ source "drivers/net/Kconfig" source "drivers/input/Kconfig" +source "drivers/led/Kconfig" + source "drivers/serial/Kconfig" source "drivers/tpm/Kconfig" @@ -32,6 +36,8 @@ source "drivers/gpio/Kconfig" source "drivers/power/Kconfig" +source "drivers/ram/Kconfig" + source "drivers/hwmon/Kconfig" source "drivers/watchdog/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 405b64b..5a35148 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -1,3 +1,4 @@ +obj-$(CONFIG_CLK) += clk/ obj-$(CONFIG_DM) += core/ obj-$(CONFIG_DM_DEMO) += demo/ obj-$(CONFIG_BIOSEMU) += bios_emulator/ @@ -7,9 +8,11 @@ obj-$(CONFIG_CPU) += cpu/ obj-y += crypto/ obj-$(CONFIG_FPGA) += fpga/ obj-y += hwmon/ +obj-$(CONFIG_LED) += led/ obj-y += misc/ obj-y += pcmcia/ obj-y += dfu/ +obj-$(CONFIG_RAM) += ram/ obj-y += rtc/ obj-y += sound/ obj-y += tpm/ diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c index e54d564..52c1602 100644 --- a/drivers/block/mvsata_ide.c +++ b/drivers/block/mvsata_ide.c @@ -13,6 +13,8 @@ #include <asm/arch/orion5x.h> #elif defined(CONFIG_KIRKWOOD) #include <asm/arch/soc.h> +#elif defined(CONFIG_ARMADA_XP) +#include <linux/mbus.h> #endif /* SATA port registers */ @@ -90,6 +92,41 @@ struct mvsata_port_registers { #define MVSATA_STATUS_TIMEOUT -1 /* + * Registers for SATA MBUS memory windows + */ + +#define MVSATA_WIN_CONTROL(w) (MVEBU_AXP_SATA_BASE + 0x30 + ((w) << 4)) +#define MVSATA_WIN_BASE(w) (MVEBU_AXP_SATA_BASE + 0x34 + ((w) << 4)) + +/* + * Initialize SATA memory windows for Armada XP + */ + +#ifdef CONFIG_ARMADA_XP +static void mvsata_ide_conf_mbus_windows(void) +{ + const struct mbus_dram_target_info *dram; + int i; + + dram = mvebu_mbus_dram_info(); + + /* Disable windows, Set Size/Base to 0 */ + for (i = 0; i < 4; i++) { + writel(0, MVSATA_WIN_CONTROL(i)); + writel(0, MVSATA_WIN_BASE(i)); + } + + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + MVSATA_WIN_CONTROL(i)); + writel(cs->base & 0xffff0000, MVSATA_WIN_BASE(i)); + } +} +#endif + +/* * Initialize one MVSATAHC port: set SControl's IPM to "always active" * and DET to "reset", then wait for SStatus's DET to become "device and * comm ok" (or time out after 50 us if no device), then set SControl's @@ -137,6 +174,10 @@ int ide_preinit(void) int ret = MVSATA_STATUS_TIMEOUT; int status; +#ifdef CONFIG_ARMADA_XP + mvsata_ide_conf_mbus_windows(); +#endif + /* Enable ATA port 0 (could be SATA port 0 or 1) if declared */ #if defined(CONFIG_SYS_ATA_IDE0_OFFSET) status = mvsata_ide_initialize_port( diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig new file mode 100644 index 0000000..07eb54c --- /dev/null +++ b/drivers/clk/Kconfig @@ -0,0 +1,19 @@ +config CLK + bool "Enable clock driver support" + depends on DM + help + This allows drivers to be provided for clock generators, including + oscillators and PLLs. Devices can use a common clock API to request + a particular clock rate and check on available clocks. Clocks can + feed into other clocks in a tree structure, with multiplexers to + choose the source for each clock. + +config SPL_CLK_SUPPORT + bool "Enable clock support in SPL" + depends on CLK + help + The clock subsystem adds a small amount of overhead to the image. + If this is acceptable and you have a need to use clock drivers in + SPL, enable this option. It might provide a cleaner interface to + setting up clocks within SPL, and allows the same drivers to be + used as U-Boot proper. diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile new file mode 100644 index 0000000..bb89fb9 --- /dev/null +++ b/drivers/clk/Makefile @@ -0,0 +1,9 @@ +# +# Copyright (c) 2015 Google, Inc +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_CLK) += clk-uclass.o +obj-$(CONFIG_SANDBOX) += clk_sandbox.o diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c new file mode 100644 index 0000000..73dfd7d --- /dev/null +++ b/drivers/clk/clk-uclass.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <errno.h> +#include <dm/lists.h> +#include <dm/root.h> + +ulong clk_get_rate(struct udevice *dev) +{ + struct clk_ops *ops = clk_get_ops(dev); + + if (!ops->get_rate) + return -ENOSYS; + + return ops->get_rate(dev); +} + +ulong clk_set_rate(struct udevice *dev, ulong rate) +{ + struct clk_ops *ops = clk_get_ops(dev); + + if (!ops->set_rate) + return -ENOSYS; + + return ops->set_rate(dev, rate); +} + +ulong clk_get_periph_rate(struct udevice *dev, int periph) +{ + struct clk_ops *ops = clk_get_ops(dev); + + if (!ops->get_periph_rate) + return -ENOSYS; + + return ops->get_periph_rate(dev, periph); +} + +ulong clk_set_periph_rate(struct udevice *dev, int periph, ulong rate) +{ + struct clk_ops *ops = clk_get_ops(dev); + + if (!ops->set_periph_rate) + return -ENOSYS; + + return ops->set_periph_rate(dev, periph, rate); +} + +UCLASS_DRIVER(clk) = { + .id = UCLASS_CLK, + .name = "clk", +}; diff --git a/drivers/clk/clk_sandbox.c b/drivers/clk/clk_sandbox.c new file mode 100644 index 0000000..058225a --- /dev/null +++ b/drivers/clk/clk_sandbox.c @@ -0,0 +1,85 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <errno.h> +#include <asm/test.h> + +struct sandbox_clk_priv { + ulong rate; + ulong periph_rate[PERIPH_ID_COUNT]; +}; + +static ulong sandbox_clk_get_rate(struct udevice *dev) +{ + struct sandbox_clk_priv *priv = dev_get_priv(dev); + + return priv->rate; +} + +static ulong sandbox_clk_set_rate(struct udevice *dev, ulong rate) +{ + struct sandbox_clk_priv *priv = dev_get_priv(dev); + + if (!rate) + return -EINVAL; + priv->rate = rate; + return 0; +} + +ulong sandbox_get_periph_rate(struct udevice *dev, int periph) +{ + struct sandbox_clk_priv *priv = dev_get_priv(dev); + + if (periph < PERIPH_ID_FIRST || periph >= PERIPH_ID_COUNT) + return -EINVAL; + return priv->periph_rate[periph]; +} + +ulong sandbox_set_periph_rate(struct udevice *dev, int periph, ulong rate) +{ + struct sandbox_clk_priv *priv = dev_get_priv(dev); + ulong old_rate; + + if (periph < PERIPH_ID_FIRST || periph >= PERIPH_ID_COUNT) + return -EINVAL; + old_rate = priv->periph_rate[periph]; + priv->periph_rate[periph] = rate; + + return old_rate; +} + +static int sandbox_clk_probe(struct udevice *dev) +{ + struct sandbox_clk_priv *priv = dev_get_priv(dev); + + priv->rate = SANDBOX_CLK_RATE; + + return 0; +} + +static struct clk_ops sandbox_clk_ops = { + .get_rate = sandbox_clk_get_rate, + .set_rate = sandbox_clk_set_rate, + .get_periph_rate = sandbox_get_periph_rate, + .set_periph_rate = sandbox_set_periph_rate, +}; + +static const struct udevice_id sandbox_clk_ids[] = { + { .compatible = "sandbox,clk" }, + { } +}; + +U_BOOT_DRIVER(clk_sandbox) = { + .name = "clk_sandbox", + .id = UCLASS_CLK, + .of_match = sandbox_clk_ids, + .ops = &sandbox_clk_ops, + .priv_auto_alloc_size = sizeof(struct sandbox_clk_priv), + .probe = sandbox_clk_probe, +}; diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index 2861b43..e40372d 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -38,6 +38,10 @@ config DM_DEVICE_REMOVE device. This is not normally required in SPL, so by default this option is disabled for SPL. + Note that this may have undesirable results in the USB subsystem as + it causes unplugged devices to linger around in the dm-tree, and it + causes USB host controllers to not be stopped when booting the OS. + config DM_STDIO bool "Support stdio registration" depends on DM diff --git a/drivers/core/Makefile b/drivers/core/Makefile index a3fec38..5c2ead8 100644 --- a/drivers/core/Makefile +++ b/drivers/core/Makefile @@ -4,8 +4,11 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_DM) += device.o lists.o root.o uclass.o util.o +obj-y += device.o lists.o root.o uclass.o util.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_OF_CONTROL) += simple-bus.o endif obj-$(CONFIG_DM_DEVICE_REMOVE) += device-remove.o +obj-$(CONFIG_DM) += dump.o +obj-$(CONFIG_OF_CONTROL) += regmap.o +obj-$(CONFIG_OF_CONTROL) += syscon-uclass.o diff --git a/drivers/core/device-remove.c b/drivers/core/device-remove.c index 6a16b4f..6b87f86 100644 --- a/drivers/core/device-remove.c +++ b/drivers/core/device-remove.c @@ -18,16 +18,7 @@ #include <dm/uclass-internal.h> #include <dm/util.h> -/** - * device_chld_unbind() - Unbind all device's children from the device - * - * On error, the function continues to unbind all children, and reports the - * first error. - * - * @dev: The device that is to be stripped of its children - * @return 0 on success, -ve on error - */ -static int device_chld_unbind(struct udevice *dev) +int device_unbind_children(struct udevice *dev) { struct udevice *pos, *n; int ret, saved_ret = 0; @@ -43,12 +34,7 @@ static int device_chld_unbind(struct udevice *dev) return saved_ret; } -/** - * device_chld_remove() - Stop all device's children - * @dev: The device whose children are to be removed - * @return 0 on success, -ve on error - */ -static int device_chld_remove(struct udevice *dev) +int device_remove_children(struct udevice *dev) { struct udevice *pos, *n; int ret; @@ -84,7 +70,7 @@ int device_unbind(struct udevice *dev) return ret; } - ret = device_chld_unbind(dev); + ret = device_unbind_children(dev); if (ret) return ret; @@ -159,7 +145,7 @@ int device_remove(struct udevice *dev) if (ret) return ret; - ret = device_chld_remove(dev); + ret = device_remove_children(dev); if (ret) goto err; diff --git a/drivers/core/device.c b/drivers/core/device.c index 85fd1fc..51b1b44 100644 --- a/drivers/core/device.c +++ b/drivers/core/device.c @@ -284,7 +284,6 @@ int device_probe_child(struct udevice *dev, void *parent_priv) goto fail; } - dev->flags |= DM_FLAG_ACTIVATED; if (drv->probe) { ret = drv->probe(dev); if (ret) { @@ -330,7 +329,7 @@ void *dev_get_platdata(struct udevice *dev) void *dev_get_parent_platdata(struct udevice *dev) { if (!dev) { - dm_warn("%s: null device", __func__); + dm_warn("%s: null device\n", __func__); return NULL; } @@ -340,7 +339,7 @@ void *dev_get_parent_platdata(struct udevice *dev) void *dev_get_uclass_platdata(struct udevice *dev) { if (!dev) { - dm_warn("%s: null device", __func__); + dm_warn("%s: null device\n", __func__); return NULL; } @@ -459,17 +458,42 @@ int device_find_child_by_of_offset(struct udevice *parent, int of_offset, return -ENODEV; } -int device_get_child_by_of_offset(struct udevice *parent, int seq, +int device_get_child_by_of_offset(struct udevice *parent, int node, struct udevice **devp) { struct udevice *dev; int ret; *devp = NULL; - ret = device_find_child_by_of_offset(parent, seq, &dev); + ret = device_find_child_by_of_offset(parent, node, &dev); return device_get_device_tail(dev, ret, devp); } +static struct udevice *_device_find_global_by_of_offset(struct udevice *parent, + int of_offset) +{ + struct udevice *dev, *found; + + if (parent->of_offset == of_offset) + return parent; + + list_for_each_entry(dev, &parent->child_head, sibling_node) { + found = _device_find_global_by_of_offset(dev, of_offset); + if (found) + return found; + } + + return NULL; +} + +int device_get_global_by_of_offset(int of_offset, struct udevice **devp) +{ + struct udevice *dev; + + dev = _device_find_global_by_of_offset(gd->dm_root, of_offset); + return device_get_device_tail(dev, dev ? 0 : -ENOENT, devp); +} + int device_find_first_child(struct udevice *parent, struct udevice **devp) { if (list_empty(&parent->child_head)) { diff --git a/drivers/core/dump.c b/drivers/core/dump.c new file mode 100644 index 0000000..fd4596e --- /dev/null +++ b/drivers/core/dump.c @@ -0,0 +1,96 @@ +/* + * Copyright (c) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <mapmem.h> +#include <dm/root.h> + +static void show_devices(struct udevice *dev, int depth, int last_flag) +{ + int i, is_last; + struct udevice *child; + char class_name[12]; + + /* print the first 11 characters to not break the tree-format. */ + strlcpy(class_name, dev->uclass->uc_drv->name, sizeof(class_name)); + printf(" %-11s [ %c ] ", class_name, + dev->flags & DM_FLAG_ACTIVATED ? '+' : ' '); + + for (i = depth; i >= 0; i--) { + is_last = (last_flag >> i) & 1; + if (i) { + if (is_last) + printf(" "); + else + printf("| "); + } else { + if (is_last) + printf("`-- "); + else + printf("|-- "); + } + } + + printf("%s\n", dev->name); + + list_for_each_entry(child, &dev->child_head, sibling_node) { + is_last = list_is_last(&child->sibling_node, &dev->child_head); + show_devices(child, depth + 1, (last_flag << 1) | is_last); + } +} + +void dm_dump_all(void) +{ + struct udevice *root; + + root = dm_root(); + if (root) { + printf(" Class Probed Name\n"); + printf("----------------------------------------\n"); + show_devices(root, -1, 0); + } +} + +/** + * dm_display_line() - Display information about a single device + * + * Displays a single line of information with an option prefix + * + * @dev: Device to display + */ +static void dm_display_line(struct udevice *dev) +{ + printf("- %c %s @ %08lx", + dev->flags & DM_FLAG_ACTIVATED ? '*' : ' ', + dev->name, (ulong)map_to_sysmem(dev)); + if (dev->seq != -1 || dev->req_seq != -1) + printf(", seq %d, (req %d)", dev->seq, dev->req_seq); + puts("\n"); +} + +void dm_dump_uclass(void) +{ + struct uclass *uc; + int ret; + int id; + + for (id = 0; id < UCLASS_COUNT; id++) { + struct udevice *dev; + + ret = uclass_get(id, &uc); + if (ret) + continue; + + printf("uclass %d: %s\n", id, uc->uc_drv->name); + if (list_empty(&uc->dev_head)) + continue; + list_for_each_entry(dev, &uc->dev_head, uclass_node) { + dm_display_line(dev); + } + puts("\n"); + } +} diff --git a/drivers/core/lists.c b/drivers/core/lists.c index 0c49d99..2e52500 100644 --- a/drivers/core/lists.c +++ b/drivers/core/lists.c @@ -86,13 +86,13 @@ int device_bind_driver_to_node(struct udevice *parent, const char *drv_name, drv = lists_driver_lookup_name(drv_name); if (!drv) { - printf("Cannot find driver '%s'\n", drv_name); + debug("Cannot find driver '%s'\n", drv_name); return -ENOENT; } ret = device_bind(parent, drv, dev_name, NULL, node, devp); if (ret) { - printf("Cannot create device named '%s' (err=%d)\n", - dev_name, ret); + debug("Cannot create device named '%s' (err=%d)\n", + dev_name, ret); return ret; } diff --git a/drivers/core/regmap.c b/drivers/core/regmap.c new file mode 100644 index 0000000..519832f --- /dev/null +++ b/drivers/core/regmap.c @@ -0,0 +1,86 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <libfdt.h> +#include <malloc.h> +#include <mapmem.h> +#include <regmap.h> + +DECLARE_GLOBAL_DATA_PTR; + +int regmap_init_mem(struct udevice *dev, struct regmap **mapp) +{ + const void *blob = gd->fdt_blob; + struct regmap_range *range; + const fdt32_t *cell; + struct regmap *map; + int count; + int addr_len, size_len, both_len; + int parent; + int len; + + parent = dev->parent->of_offset; + addr_len = fdt_address_cells(blob, parent); + size_len = fdt_size_cells(blob, parent); + both_len = addr_len + size_len; + + cell = fdt_getprop(blob, dev->of_offset, "reg", &len); + len /= sizeof(*cell); + count = len / both_len; + if (!cell || !count) + return -EINVAL; + + map = malloc(sizeof(struct regmap)); + if (!map) + return -ENOMEM; + + if (count <= 1) { + map->range = &map->base_range; + } else { + map->range = malloc(count * sizeof(struct regmap_range)); + if (!map->range) { + free(map); + return -ENOMEM; + } + } + + map->base = fdtdec_get_number(cell, addr_len); + map->range_count = count; + + for (range = map->range; count > 0; + count--, cell += both_len, range++) { + range->start = fdtdec_get_number(cell, addr_len); + range->size = fdtdec_get_number(cell + addr_len, size_len); + } + + *mapp = map; + + return 0; +} + +void *regmap_get_range(struct regmap *map, unsigned int range_num) +{ + struct regmap_range *range; + + if (range_num >= map->range_count) + return NULL; + range = &map->range[range_num]; + + return map_sysmem(range->start, range->size); +} + +int regmap_uninit(struct regmap *map) +{ + if (map->range_count > 1) + free(map->range); + free(map); + + return 0; +} diff --git a/drivers/core/syscon-uclass.c b/drivers/core/syscon-uclass.c new file mode 100644 index 0000000..686c320 --- /dev/null +++ b/drivers/core/syscon-uclass.c @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <syscon.h> +#include <dm.h> +#include <errno.h> +#include <regmap.h> +#include <dm/device-internal.h> +#include <dm/lists.h> +#include <dm/root.h> +#include <linux/err.h> + +struct regmap *syscon_get_regmap(struct udevice *dev) +{ + struct syscon_uc_info *priv; + + if (device_get_uclass_id(dev) != UCLASS_SYSCON) + return ERR_PTR(-ENOEXEC); + priv = dev_get_uclass_priv(dev); + return priv->regmap; +} + +static int syscon_pre_probe(struct udevice *dev) +{ + struct syscon_uc_info *priv = dev_get_uclass_priv(dev); + + return regmap_init_mem(dev, &priv->regmap); +} + +struct regmap *syscon_get_regmap_by_driver_data(ulong driver_data) +{ + struct udevice *dev; + struct uclass *uc; + int ret; + + ret = uclass_get(UCLASS_SYSCON, &uc); + if (ret) + return ERR_PTR(ret); + uclass_foreach_dev(dev, uc) { + if (dev->driver_data == driver_data) { + struct syscon_uc_info *priv; + int ret; + + ret = device_probe(dev); + if (ret) + return ERR_PTR(ret); + priv = dev_get_uclass_priv(dev); + + return priv->regmap; + } + } + + return ERR_PTR(-ENODEV); +} + +void *syscon_get_first_range(ulong driver_data) +{ + struct regmap *map; + + map = syscon_get_regmap_by_driver_data(driver_data); + if (IS_ERR(map)) + return map; + return regmap_get_range(map, 0); +} + +UCLASS_DRIVER(syscon) = { + .id = UCLASS_SYSCON, + .name = "syscon", + .per_device_auto_alloc_size = sizeof(struct syscon_uc_info), + .pre_probe = syscon_pre_probe, +}; diff --git a/drivers/core/uclass.c b/drivers/core/uclass.c index 7de8173..aba9880 100644 --- a/drivers/core/uclass.c +++ b/drivers/core/uclass.c @@ -56,8 +56,8 @@ static int uclass_add(enum uclass_id id, struct uclass **ucp) *ucp = NULL; uc_drv = lists_uclass_lookup(id); if (!uc_drv) { - dm_warn("Cannot find uclass for id %d: please add the UCLASS_DRIVER() declaration for this UCLASS_... id\n", - id); + debug("Cannot find uclass for id %d: please add the UCLASS_DRIVER() declaration for this UCLASS_... id\n", + id); return -ENOENT; } uc = calloc(1, sizeof(*uc)); diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index fa22383..14ecf12 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -135,6 +135,13 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) __attribute__((weak, alias("__get_spd"))) void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address); +/* This function allows boards to update SPD address */ +__weak void update_spd_address(unsigned int ctrl_num, + unsigned int slot, + unsigned int *addr) +{ +} + void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, unsigned int ctrl_num, unsigned int dimm_slots_per_ctrl) { @@ -148,6 +155,7 @@ void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, for (i = 0; i < dimm_slots_per_ctrl; i++) { i2c_address = spd_i2c_addr[ctrl_num][i]; + update_spd_address(ctrl_num, i, &i2c_address); get_spd(&(ctrl_dimms_spd[i]), i2c_address); } } diff --git a/drivers/ddr/marvell/a38x/Makefile b/drivers/ddr/marvell/a38x/Makefile new file mode 100644 index 0000000..bf6ea49 --- /dev/null +++ b/drivers/ddr/marvell/a38x/Makefile @@ -0,0 +1,19 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_SPL_BUILD) += ddr3_a38x.o +obj-$(CONFIG_SPL_BUILD) += ddr3_a38x_training.o +obj-$(CONFIG_SPL_BUILD) += ddr3_debug.o +obj-$(CONFIG_SPL_BUILD) += ddr3_hws_hw_training.o +obj-$(CONFIG_SPL_BUILD) += ddr3_init.o +obj-$(CONFIG_SPL_BUILD) += ddr3_training.o +obj-$(CONFIG_SPL_BUILD) += ddr3_training_bist.o +obj-$(CONFIG_SPL_BUILD) += ddr3_training_centralization.o +obj-$(CONFIG_SPL_BUILD) += ddr3_training_db.o +obj-$(CONFIG_SPL_BUILD) += ddr3_training_hw_algo.o +obj-$(CONFIG_SPL_BUILD) += ddr3_training_ip_engine.o +obj-$(CONFIG_SPL_BUILD) += ddr3_training_leveling.o +obj-$(CONFIG_SPL_BUILD) += ddr3_training_pbs.o +obj-$(CONFIG_SPL_BUILD) += ddr3_training_static.o +obj-$(CONFIG_SPL_BUILD) += xor.o diff --git a/drivers/ddr/marvell/a38x/ddr3_a38x.c b/drivers/ddr/marvell/a38x/ddr3_a38x.c new file mode 100644 index 0000000..f469907 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_a38x.c @@ -0,0 +1,741 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +#define A38X_NUMBER_OF_INTERFACES 5 + +#define SAR_DEV_ID_OFFS 27 +#define SAR_DEV_ID_MASK 0x7 + +/* Termal Sensor Registers */ +#define TSEN_STATE_REG 0xe4070 +#define TSEN_STATE_OFFSET 31 +#define TSEN_STATE_MASK (0x1 << TSEN_STATE_OFFSET) +#define TSEN_CONF_REG 0xe4074 +#define TSEN_CONF_RST_OFFSET 8 +#define TSEN_CONF_RST_MASK (0x1 << TSEN_CONF_RST_OFFSET) +#define TSEN_STATUS_REG 0xe4078 +#define TSEN_STATUS_READOUT_VALID_OFFSET 10 +#define TSEN_STATUS_READOUT_VALID_MASK (0x1 << \ + TSEN_STATUS_READOUT_VALID_OFFSET) +#define TSEN_STATUS_TEMP_OUT_OFFSET 0 +#define TSEN_STATUS_TEMP_OUT_MASK (0x3ff << TSEN_STATUS_TEMP_OUT_OFFSET) + +static struct dfx_access interface_map[] = { + /* Pipe Client */ + { 0, 17 }, + { 1, 7 }, + { 1, 11 }, + { 0, 3 }, + { 1, 25 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 } +}; + +/* This array hold the board round trip delay (DQ and CK) per <interface,bus> */ +struct trip_delay_element a38x_board_round_trip_delay_array[] = { + /* 1st board */ + /* Interface bus DQS-delay CK-delay */ + { 3952, 5060 }, + { 3192, 4493 }, + { 4785, 6677 }, + { 3413, 7267 }, + { 4282, 6086 }, /* ECC PUP */ + { 3952, 5134 }, + { 3192, 4567 }, + { 4785, 6751 }, + { 3413, 7341 }, + { 4282, 6160 }, /* ECC PUP */ + + /* 2nd board */ + /* Interface bus DQS-delay CK-delay */ + { 3952, 5060 }, + { 3192, 4493 }, + { 4785, 6677 }, + { 3413, 7267 }, + { 4282, 6086 }, /* ECC PUP */ + { 3952, 5134 }, + { 3192, 4567 }, + { 4785, 6751 }, + { 3413, 7341 }, + { 4282, 6160 } /* ECC PUP */ +}; + +#ifdef STATIC_ALGO_SUPPORT +/* package trace */ +static struct trip_delay_element a38x_package_round_trip_delay_array[] = { + /* IF BUS DQ_DELAY CK_DELAY */ + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 }, + { 0, 0 } +}; + +static int a38x_silicon_delay_offset[] = { + /* board 0 */ + 0, + /* board 1 */ + 0, + /* board 2 */ + 0 +}; +#endif + +static u8 a38x_bw_per_freq[DDR_FREQ_LIMIT] = { + 0x3, /* DDR_FREQ_100 */ + 0x4, /* DDR_FREQ_400 */ + 0x4, /* DDR_FREQ_533 */ + 0x5, /* DDR_FREQ_667 */ + 0x5, /* DDR_FREQ_800 */ + 0x5, /* DDR_FREQ_933 */ + 0x5, /* DDR_FREQ_1066 */ + 0x3, /* DDR_FREQ_311 */ + 0x3, /* DDR_FREQ_333 */ + 0x4, /* DDR_FREQ_467 */ + 0x5, /* DDR_FREQ_850 */ + 0x5, /* DDR_FREQ_600 */ + 0x3, /* DDR_FREQ_300 */ + 0x5, /* DDR_FREQ_900 */ + 0x3, /* DDR_FREQ_360 */ + 0x5 /* DDR_FREQ_1000 */ +}; + +static u8 a38x_rate_per_freq[DDR_FREQ_LIMIT] = { + /*TBD*/ 0x1, /* DDR_FREQ_100 */ + 0x2, /* DDR_FREQ_400 */ + 0x2, /* DDR_FREQ_533 */ + 0x2, /* DDR_FREQ_667 */ + 0x2, /* DDR_FREQ_800 */ + 0x3, /* DDR_FREQ_933 */ + 0x3, /* DDR_FREQ_1066 */ + 0x1, /* DDR_FREQ_311 */ + 0x1, /* DDR_FREQ_333 */ + 0x2, /* DDR_FREQ_467 */ + 0x2, /* DDR_FREQ_850 */ + 0x2, /* DDR_FREQ_600 */ + 0x1, /* DDR_FREQ_300 */ + 0x2, /* DDR_FREQ_900 */ + 0x1, /* DDR_FREQ_360 */ + 0x2 /* DDR_FREQ_1000 */ +}; + +static u16 a38x_vco_freq_per_sar[] = { + 666, /* 0 */ + 1332, + 800, + 1600, + 1066, + 2132, + 1200, + 2400, + 1332, + 1332, + 1500, + 1500, + 1600, /* 12 */ + 1600, + 1700, + 1700, + 1866, + 1866, + 1800, /* 18 */ + 2000, + 2000, + 4000, + 2132, + 2132, + 2300, + 2300, + 2400, + 2400, + 2500, + 2500, + 800 +}; + +u32 pipe_multicast_mask; + +u32 dq_bit_map_2_phy_pin[] = { + 1, 0, 2, 6, 9, 8, 3, 7, /* 0 */ + 8, 9, 1, 7, 2, 6, 3, 0, /* 1 */ + 3, 9, 7, 8, 1, 0, 2, 6, /* 2 */ + 1, 0, 6, 2, 8, 3, 7, 9, /* 3 */ + 0, 1, 2, 9, 7, 8, 3, 6, /* 4 */ +}; + +static int ddr3_tip_a38x_set_divider(u8 dev_num, u32 if_id, + enum hws_ddr_freq freq); + +/* + * Read temperature TJ value + */ +u32 ddr3_ctrl_get_junc_temp(u8 dev_num) +{ + int reg = 0; + + /* Initiates TSEN hardware reset once */ + if ((reg_read(TSEN_CONF_REG) & TSEN_CONF_RST_MASK) == 0) + reg_bit_set(TSEN_CONF_REG, TSEN_CONF_RST_MASK); + mdelay(10); + + /* Check if the readout field is valid */ + if ((reg_read(TSEN_STATUS_REG) & TSEN_STATUS_READOUT_VALID_MASK) == 0) { + printf("%s: TSEN not ready\n", __func__); + return 0; + } + + reg = reg_read(TSEN_STATUS_REG); + reg = (reg & TSEN_STATUS_TEMP_OUT_MASK) >> TSEN_STATUS_TEMP_OUT_OFFSET; + + return ((((10000 * reg) / 21445) * 1000) - 272674) / 1000; +} + +/* + * Name: ddr3_tip_a38x_get_freq_config. + * Desc: + * Args: + * Notes: + * Returns: MV_OK if success, other error code if fail. + */ +int ddr3_tip_a38x_get_freq_config(u8 dev_num, enum hws_ddr_freq freq, + struct hws_tip_freq_config_info + *freq_config_info) +{ + if (a38x_bw_per_freq[freq] == 0xff) + return MV_NOT_SUPPORTED; + + if (freq_config_info == NULL) + return MV_BAD_PARAM; + + freq_config_info->bw_per_freq = a38x_bw_per_freq[freq]; + freq_config_info->rate_per_freq = a38x_rate_per_freq[freq]; + freq_config_info->is_supported = 1; + + return MV_OK; +} + +/* + * Name: ddr3_tip_a38x_pipe_enable. + * Desc: + * Args: + * Notes: + * Returns: MV_OK if success, other error code if fail. + */ +int ddr3_tip_a38x_pipe_enable(u8 dev_num, enum hws_access_type interface_access, + u32 if_id, int enable) +{ + u32 data_value, pipe_enable_mask = 0; + + if (enable == 0) { + pipe_enable_mask = 0; + } else { + if (interface_access == ACCESS_TYPE_MULTICAST) + pipe_enable_mask = pipe_multicast_mask; + else + pipe_enable_mask = (1 << interface_map[if_id].pipe); + } + + CHECK_STATUS(ddr3_tip_reg_read + (dev_num, PIPE_ENABLE_ADDR, &data_value, MASK_ALL_BITS)); + data_value = (data_value & (~0xff)) | pipe_enable_mask; + CHECK_STATUS(ddr3_tip_reg_write(dev_num, PIPE_ENABLE_ADDR, data_value)); + + return MV_OK; +} + +/* + * Name: ddr3_tip_a38x_if_write. + * Desc: + * Args: + * Notes: + * Returns: MV_OK if success, other error code if fail. + */ +int ddr3_tip_a38x_if_write(u8 dev_num, enum hws_access_type interface_access, + u32 if_id, u32 reg_addr, u32 data_value, + u32 mask) +{ + u32 ui_data_read; + + if (mask != MASK_ALL_BITS) { + CHECK_STATUS(ddr3_tip_a38x_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, reg_addr, + &ui_data_read, MASK_ALL_BITS)); + data_value = (ui_data_read & (~mask)) | (data_value & mask); + } + + reg_write(reg_addr, data_value); + + return MV_OK; +} + +/* + * Name: ddr3_tip_a38x_if_read. + * Desc: + * Args: + * Notes: + * Returns: MV_OK if success, other error code if fail. + */ +int ddr3_tip_a38x_if_read(u8 dev_num, enum hws_access_type interface_access, + u32 if_id, u32 reg_addr, u32 *data, u32 mask) +{ + *data = reg_read(reg_addr) & mask; + + return MV_OK; +} + +/* + * Name: ddr3_tip_a38x_select_ddr_controller. + * Desc: Enable/Disable access to Marvell's server. + * Args: dev_num - device number + * enable - whether to enable or disable the server + * Notes: + * Returns: MV_OK if success, other error code if fail. + */ +int ddr3_tip_a38x_select_ddr_controller(u8 dev_num, int enable) +{ + u32 reg; + + reg = reg_read(CS_ENABLE_REG); + + if (enable) + reg |= (1 << 6); + else + reg &= ~(1 << 6); + + reg_write(CS_ENABLE_REG, reg); + + return MV_OK; +} + +/* + * Name: ddr3_tip_init_a38x_silicon. + * Desc: init Training SW DB. + * Args: + * Notes: + * Returns: MV_OK if success, other error code if fail. + */ +static int ddr3_tip_init_a38x_silicon(u32 dev_num, u32 board_id) +{ + struct hws_tip_config_func_db config_func; + enum hws_ddr_freq ddr_freq; + int status; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* new read leveling version */ + config_func.tip_dunit_read_func = ddr3_tip_a38x_if_read; + config_func.tip_dunit_write_func = ddr3_tip_a38x_if_write; + config_func.tip_dunit_mux_select_func = + ddr3_tip_a38x_select_ddr_controller; + config_func.tip_get_freq_config_info_func = + ddr3_tip_a38x_get_freq_config; + config_func.tip_set_freq_divider_func = ddr3_tip_a38x_set_divider; + config_func.tip_get_device_info_func = ddr3_tip_a38x_get_device_info; + config_func.tip_get_temperature = ddr3_ctrl_get_junc_temp; + + ddr3_tip_init_config_func(dev_num, &config_func); + + ddr3_tip_register_dq_table(dev_num, dq_bit_map_2_phy_pin); + +#ifdef STATIC_ALGO_SUPPORT + { + struct hws_tip_static_config_info static_config; + u32 board_offset = + board_id * A38X_NUMBER_OF_INTERFACES * + tm->num_of_bus_per_interface; + + static_config.silicon_delay = + a38x_silicon_delay_offset[board_id]; + static_config.package_trace_arr = + a38x_package_round_trip_delay_array; + static_config.board_trace_arr = + &a38x_board_round_trip_delay_array[board_offset]; + ddr3_tip_init_static_config_db(dev_num, &static_config); + } +#endif + status = ddr3_tip_a38x_get_init_freq(dev_num, &ddr_freq); + if (MV_OK != status) { + DEBUG_TRAINING_ACCESS(DEBUG_LEVEL_ERROR, + ("DDR3 silicon get target frequency - FAILED 0x%x\n", + status)); + return status; + } + + rl_version = 1; + mask_tune_func = (SET_LOW_FREQ_MASK_BIT | + LOAD_PATTERN_MASK_BIT | + SET_MEDIUM_FREQ_MASK_BIT | WRITE_LEVELING_MASK_BIT | + /* LOAD_PATTERN_2_MASK_BIT | */ + WRITE_LEVELING_SUPP_MASK_BIT | + READ_LEVELING_MASK_BIT | + PBS_RX_MASK_BIT | + PBS_TX_MASK_BIT | + SET_TARGET_FREQ_MASK_BIT | + WRITE_LEVELING_TF_MASK_BIT | + WRITE_LEVELING_SUPP_TF_MASK_BIT | + READ_LEVELING_TF_MASK_BIT | + CENTRALIZATION_RX_MASK_BIT | + CENTRALIZATION_TX_MASK_BIT); + rl_mid_freq_wa = 1; + + if ((ddr_freq == DDR_FREQ_333) || (ddr_freq == DDR_FREQ_400)) { + mask_tune_func = (WRITE_LEVELING_MASK_BIT | + LOAD_PATTERN_2_MASK_BIT | + WRITE_LEVELING_SUPP_MASK_BIT | + READ_LEVELING_MASK_BIT | + PBS_RX_MASK_BIT | + PBS_TX_MASK_BIT | + CENTRALIZATION_RX_MASK_BIT | + CENTRALIZATION_TX_MASK_BIT); + rl_mid_freq_wa = 0; /* WA not needed if 333/400 is TF */ + } + + /* Supplementary not supported for ECC modes */ + if (1 == ddr3_if_ecc_enabled()) { + mask_tune_func &= ~WRITE_LEVELING_SUPP_TF_MASK_BIT; + mask_tune_func &= ~WRITE_LEVELING_SUPP_MASK_BIT; + mask_tune_func &= ~PBS_TX_MASK_BIT; + mask_tune_func &= ~PBS_RX_MASK_BIT; + } + + if (ck_delay == -1) + ck_delay = 160; + if (ck_delay_16 == -1) + ck_delay_16 = 160; + ca_delay = 0; + delay_enable = 1; + + calibration_update_control = 1; + + init_freq = tm->interface_params[first_active_if].memory_freq; + + ddr3_tip_a38x_get_medium_freq(dev_num, &medium_freq); + + return MV_OK; +} + +int ddr3_a38x_update_topology_map(u32 dev_num, struct hws_topology_map *tm) +{ + u32 if_id = 0; + enum hws_ddr_freq freq; + + ddr3_tip_a38x_get_init_freq(dev_num, &freq); + tm->interface_params[if_id].memory_freq = freq; + + /* + * re-calc topology parameters according to topology updates + * (if needed) + */ + CHECK_STATUS(hws_ddr3_tip_load_topology_map(dev_num, tm)); + + return MV_OK; +} + +int ddr3_tip_init_a38x(u32 dev_num, u32 board_id) +{ + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (NULL == tm) + return MV_FAIL; + + ddr3_a38x_update_topology_map(dev_num, tm); + ddr3_tip_init_a38x_silicon(dev_num, board_id); + + return MV_OK; +} + +int ddr3_tip_a38x_get_init_freq(int dev_num, enum hws_ddr_freq *freq) +{ + u32 reg; + + /* Read sample at reset setting */ + reg = (reg_read(REG_DEVICE_SAR1_ADDR) >> + RST2_CPU_DDR_CLOCK_SELECT_IN_OFFSET) & + RST2_CPU_DDR_CLOCK_SELECT_IN_MASK; + switch (reg) { + case 0x0: + case 0x1: + *freq = DDR_FREQ_333; + break; + case 0x2: + case 0x3: + *freq = DDR_FREQ_400; + break; + case 0x4: + case 0xd: + *freq = DDR_FREQ_533; + break; + case 0x6: + *freq = DDR_FREQ_600; + break; + case 0x8: + case 0x11: + case 0x14: + *freq = DDR_FREQ_667; + break; + case 0xc: + case 0x15: + case 0x1b: + *freq = DDR_FREQ_800; + break; + case 0x10: + *freq = DDR_FREQ_933; + break; + case 0x12: + *freq = DDR_FREQ_900; + break; + case 0x13: + *freq = DDR_FREQ_900; + break; + default: + *freq = 0; + return MV_NOT_SUPPORTED; + } + + return MV_OK; +} + +int ddr3_tip_a38x_get_medium_freq(int dev_num, enum hws_ddr_freq *freq) +{ + u32 reg; + + /* Read sample at reset setting */ + reg = (reg_read(REG_DEVICE_SAR1_ADDR) >> + RST2_CPU_DDR_CLOCK_SELECT_IN_OFFSET) & + RST2_CPU_DDR_CLOCK_SELECT_IN_MASK; + switch (reg) { + case 0x0: + case 0x1: + /* Medium is same as TF to run PBS in this freq */ + *freq = DDR_FREQ_333; + break; + case 0x2: + case 0x3: + /* Medium is same as TF to run PBS in this freq */ + *freq = DDR_FREQ_400; + break; + case 0x4: + case 0xd: + *freq = DDR_FREQ_533; + break; + case 0x8: + case 0x11: + case 0x14: + *freq = DDR_FREQ_333; + break; + case 0xc: + case 0x15: + case 0x1b: + *freq = DDR_FREQ_400; + break; + case 0x6: + *freq = DDR_FREQ_300; + break; + case 0x12: + *freq = DDR_FREQ_360; + break; + case 0x13: + *freq = DDR_FREQ_400; + break; + default: + *freq = 0; + return MV_NOT_SUPPORTED; + } + + return MV_OK; +} + +u32 ddr3_tip_get_init_freq(void) +{ + enum hws_ddr_freq freq; + + ddr3_tip_a38x_get_init_freq(0, &freq); + + return freq; +} + +static int ddr3_tip_a38x_set_divider(u8 dev_num, u32 if_id, + enum hws_ddr_freq frequency) +{ + u32 divider = 0; + u32 sar_val; + + if (if_id != 0) { + DEBUG_TRAINING_ACCESS(DEBUG_LEVEL_ERROR, + ("A38x does not support interface 0x%x\n", + if_id)); + return MV_BAD_PARAM; + } + + /* get VCO freq index */ + sar_val = (reg_read(REG_DEVICE_SAR1_ADDR) >> + RST2_CPU_DDR_CLOCK_SELECT_IN_OFFSET) & + RST2_CPU_DDR_CLOCK_SELECT_IN_MASK; + divider = a38x_vco_freq_per_sar[sar_val] / freq_val[frequency]; + + /* Set Sync mode */ + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x20220, 0x0, + 0x1000)); + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe42f4, 0x0, + 0x200)); + + /* cpupll_clkdiv_reset_mask */ + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4264, 0x1f, + 0xff)); + + /* cpupll_clkdiv_reload_smooth */ + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4260, + (0x2 << 8), (0xff << 8))); + + /* cpupll_clkdiv_relax_en */ + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4260, + (0x2 << 24), (0xff << 24))); + + /* write the divider */ + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4268, + (divider << 8), (0x3f << 8))); + + /* set cpupll_clkdiv_reload_ratio */ + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4264, + (1 << 8), (1 << 8))); + + /* undet cpupll_clkdiv_reload_ratio */ + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4264, 0, + (1 << 8))); + + /* clear cpupll_clkdiv_reload_force */ + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4260, 0, + (0xff << 8))); + + /* clear cpupll_clkdiv_relax_en */ + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4260, 0, + (0xff << 24))); + + /* clear cpupll_clkdiv_reset_mask */ + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0xe4264, 0, + 0xff)); + + /* Dunit training clock + 1:1 mode */ + if ((frequency == DDR_FREQ_LOW_FREQ) || (freq_val[frequency] <= 400)) { + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x18488, + (1 << 16), (1 << 16))); + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x1524, + (0 << 15), (1 << 15))); + } else { + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x18488, + 0, (1 << 16))); + CHECK_STATUS(ddr3_tip_a38x_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x1524, + (1 << 15), (1 << 15))); + } + + return MV_OK; +} + +/* + * external read from memory + */ +int ddr3_tip_ext_read(u32 dev_num, u32 if_id, u32 reg_addr, + u32 num_of_bursts, u32 *data) +{ + u32 burst_num; + + for (burst_num = 0; burst_num < num_of_bursts * 8; burst_num++) + data[burst_num] = readl(reg_addr + 4 * burst_num); + + return MV_OK; +} + +/* + * external write to memory + */ +int ddr3_tip_ext_write(u32 dev_num, u32 if_id, u32 reg_addr, + u32 num_of_bursts, u32 *data) { + u32 burst_num; + + for (burst_num = 0; burst_num < num_of_bursts * 8; burst_num++) + writel(data[burst_num], reg_addr + 4 * burst_num); + + return MV_OK; +} + +int ddr3_silicon_pre_init(void) +{ + int result; + + result = ddr3_silicon_init(); + + return result; +} + +int ddr3_post_run_alg(void) +{ + return MV_OK; +} + +int ddr3_silicon_post_init(void) +{ + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* Set half bus width */ + if (DDR3_IS_16BIT_DRAM_MODE(tm->bus_act_mask)) { + CHECK_STATUS(ddr3_tip_if_write + (0, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + REG_SDRAM_CONFIG_ADDR, 0x0, 0x8000)); + } + + return MV_OK; +} + +int ddr3_tip_a38x_get_device_info(u8 dev_num, struct ddr3_device_info *info_ptr) +{ + info_ptr->device_id = 0x6800; + info_ptr->ck_delay = ck_delay; + + return MV_OK; +} diff --git a/drivers/ddr/marvell/a38x/ddr3_a38x.h b/drivers/ddr/marvell/a38x/ddr3_a38x.h new file mode 100644 index 0000000..49621bc --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_a38x.h @@ -0,0 +1,98 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_A38X_H +#define _DDR3_A38X_H + +#define MAX_INTERFACE_NUM 1 +#define MAX_BUS_NUM 5 + +#include "ddr3_hws_hw_training_def.h" + +/* Allow topolgy update from board TWSI device*/ +#if !defined(CONFIG_CUSTOMER_BOARD_SUPPORT) +#define MV_DDR_TOPOLOGY_UPDATE_FROM_TWSI +#endif + +#define ECC_SUPPORT + +/* right now, we're not supporting this in mainline */ +#undef SUPPORT_STATIC_DUNIT_CONFIG + +/* Controler bus divider 1 for 32 bit, 2 for 64 bit */ +#define DDR_CONTROLLER_BUS_WIDTH_MULTIPLIER 1 + +/* Tune internal training params values */ +#define TUNE_TRAINING_PARAMS_CK_DELAY 160 +#define TUNE_TRAINING_PARAMS_CK_DELAY_16 160 +#define TUNE_TRAINING_PARAMS_PFINGER 41 +#define TUNE_TRAINING_PARAMS_NFINGER 43 +#define TUNE_TRAINING_PARAMS_PHYREG3VAL 0xa + +#define MARVELL_BOARD MARVELL_BOARD_ID_BASE + + +#define REG_DEVICE_SAR1_ADDR 0xe4204 +#define RST2_CPU_DDR_CLOCK_SELECT_IN_OFFSET 17 +#define RST2_CPU_DDR_CLOCK_SELECT_IN_MASK 0x1f + +/* DRAM Windows */ +#define REG_XBAR_WIN_5_CTRL_ADDR 0x20050 +#define REG_XBAR_WIN_5_BASE_ADDR 0x20054 + +/* DRAM Windows */ +#define REG_XBAR_WIN_4_CTRL_ADDR 0x20040 +#define REG_XBAR_WIN_4_BASE_ADDR 0x20044 +#define REG_XBAR_WIN_4_REMAP_ADDR 0x20048 +#define REG_XBAR_WIN_7_REMAP_ADDR 0x20078 +#define REG_XBAR_WIN_16_CTRL_ADDR 0x200d0 +#define REG_XBAR_WIN_16_BASE_ADDR 0x200d4 +#define REG_XBAR_WIN_16_REMAP_ADDR 0x200dc +#define REG_XBAR_WIN_19_CTRL_ADDR 0x200e8 + +#define REG_FASTPATH_WIN_BASE_ADDR(win) (0x20180 + (0x8 * win)) +#define REG_FASTPATH_WIN_CTRL_ADDR(win) (0x20184 + (0x8 * win)) + +/* SatR defined too change topology busWidth and ECC configuration */ +#define DDR_SATR_CONFIG_MASK_WIDTH 0x8 +#define DDR_SATR_CONFIG_MASK_ECC 0x10 +#define DDR_SATR_CONFIG_MASK_ECC_PUP 0x20 + +#define REG_SAMPLE_RESET_HIGH_ADDR 0x18600 + +#define MV_BOARD_REFCLK MV_BOARD_REFCLK_25MHZ + +/* Matrix enables DRAM modes (bus width/ECC) per boardId */ +#define TOPOLOGY_UPDATE_32BIT 0 +#define TOPOLOGY_UPDATE_32BIT_ECC 1 +#define TOPOLOGY_UPDATE_16BIT 2 +#define TOPOLOGY_UPDATE_16BIT_ECC 3 +#define TOPOLOGY_UPDATE_16BIT_ECC_PUP3 4 +#define TOPOLOGY_UPDATE { \ + /* 32Bit, 32bit ECC, 16bit, 16bit ECC PUP4, 16bit ECC PUP3 */ \ + {1, 1, 1, 1, 1}, /* RD_NAS_68XX_ID */ \ + {1, 1, 1, 1, 1}, /* DB_68XX_ID */ \ + {1, 0, 1, 0, 1}, /* RD_AP_68XX_ID */ \ + {1, 0, 1, 0, 1}, /* DB_AP_68XX_ID */ \ + {1, 0, 1, 0, 1}, /* DB_GP_68XX_ID */ \ + {0, 0, 1, 1, 0}, /* DB_BP_6821_ID */ \ + {1, 1, 1, 1, 1} /* DB_AMC_6820_ID */ \ + }; + +enum { + CPU_1066MHZ_DDR_400MHZ, + CPU_RESERVED_DDR_RESERVED0, + CPU_667MHZ_DDR_667MHZ, + CPU_800MHZ_DDR_800MHZ, + CPU_RESERVED_DDR_RESERVED1, + CPU_RESERVED_DDR_RESERVED2, + CPU_RESERVED_DDR_RESERVED3, + LAST_FREQ +}; + +#define ACTIVE_INTERFACE_MASK 0x1 + +#endif /* _DDR3_A38X_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_a38x_mc_static.h b/drivers/ddr/marvell/a38x/ddr3_a38x_mc_static.h new file mode 100644 index 0000000..b879a01 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_a38x_mc_static.h @@ -0,0 +1,226 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_A38X_MC_STATIC_H +#define _DDR3_A38X_MC_STATIC_H + +#include "ddr3_a38x.h" + +#ifdef SUPPORT_STATIC_DUNIT_CONFIG + +#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT +static struct reg_data ddr3_customer_800[] = { + /* parameters for customer board (based on 800MHZ) */ + {0x1400, 0x7b00cc30, 0xffffffff}, + {0x1404, 0x36301820, 0xffffffff}, + {0x1408, 0x5415baab, 0xffffffff}, + {0x140c, 0x38411def, 0xffffffff}, + {0x1410, 0x18300000, 0xffffffff}, + {0x1414, 0x00000700, 0xffffffff}, + {0x1424, 0x0060f3ff, 0xffffffff}, + {0x1428, 0x0011a940, 0xffffffff}, + {0x142c, 0x28c5134, 0xffffffff}, + {0x1474, 0x00000000, 0xffffffff}, + {0x147c, 0x0000d771, 0xffffffff}, + {0x1494, 0x00030000, 0xffffffff}, + {0x149c, 0x00000300, 0xffffffff}, + {0x14a8, 0x00000000, 0xffffffff}, + {0x14cc, 0xbd09000d, 0xffffffff}, + {0x1504, 0xfffffff1, 0xffffffff}, + {0x150c, 0xffffffe5, 0xffffffff}, + {0x1514, 0x00000000, 0xffffffff}, + {0x151c, 0x00000000, 0xffffffff}, + {0x1538, 0x00000b0b, 0xffffffff}, + {0x153c, 0x00000c0c, 0xffffffff}, + {0x15d0, 0x00000670, 0xffffffff}, + {0x15d4, 0x00000046, 0xffffffff}, + {0x15d8, 0x00000010, 0xffffffff}, + {0x15dc, 0x00000000, 0xffffffff}, + {0x15e0, 0x00000023, 0xffffffff}, + {0x15e4, 0x00203c18, 0xffffffff}, + {0x15ec, 0xf8000019, 0xffffffff}, + {0x16a0, 0xcc000006, 0xffffffff}, /* Clock Delay */ + {0xe4124, 0x08008073, 0xffffffff}, /* AVS BG default */ + {0, 0, 0} +}; + +#else /* CONFIG_CUSTOMER_BOARD_SUPPORT */ + +struct reg_data ddr3_a38x_933[MV_MAX_DDR3_STATIC_SIZE] = { + /* parameters for 933MHZ */ + {0x1400, 0x7b00ce3a, 0xffffffff}, + {0x1404, 0x36301820, 0xffffffff}, + {0x1408, 0x7417eccf, 0xffffffff}, + {0x140c, 0x3e421f98, 0xffffffff}, + {0x1410, 0x1a300000, 0xffffffff}, + {0x1414, 0x00000700, 0xffffffff}, + {0x1424, 0x0060f3ff, 0xffffffff}, + {0x1428, 0x0013ca50, 0xffffffff}, + {0x142c, 0x028c5165, 0xffffffff}, + {0x1474, 0x00000000, 0xffffffff}, + {0x147c, 0x0000e871, 0xffffffff}, + {0x1494, 0x00010000, 0xffffffff}, + {0x149c, 0x00000001, 0xffffffff}, + {0x14a8, 0x00000000, 0xffffffff}, + {0x14cc, 0xbd09000d, 0xffffffff}, + {0x1504, 0xffffffe1, 0xffffffff}, + {0x150c, 0xffffffe5, 0xffffffff}, + {0x1514, 0x00000000, 0xffffffff}, + {0x151c, 0x00000000, 0xffffffff}, + {0x1538, 0x00000d0d, 0xffffffff}, + {0x153c, 0x00000d0d, 0xffffffff}, + {0x15d0, 0x00000608, 0xffffffff}, + {0x15d4, 0x00000044, 0xffffffff}, + {0x15d8, 0x00000020, 0xffffffff}, + {0x15dc, 0x00000000, 0xffffffff}, + {0x15e0, 0x00000021, 0xffffffff}, + {0x15e4, 0x00203c18, 0xffffffff}, + {0x15ec, 0xf8000019, 0xffffffff}, + {0x16a0, 0xcc000006, 0xffffffff}, /* Clock Delay */ + {0xe4124, 0x08008073, 0xffffffff}, /* AVS BG default */ + {0, 0, 0} +}; + +static struct reg_data ddr3_a38x_800[] = { + /* parameters for 800MHZ */ + {0x1400, 0x7b00cc30, 0xffffffff}, + {0x1404, 0x36301820, 0xffffffff}, + {0x1408, 0x5415baab, 0xffffffff}, + {0x140c, 0x38411def, 0xffffffff}, + {0x1410, 0x18300000, 0xffffffff}, + {0x1414, 0x00000700, 0xffffffff}, + {0x1424, 0x0060f3ff, 0xffffffff}, + {0x1428, 0x0011a940, 0xffffffff}, + {0x142c, 0x28c5134, 0xffffffff}, + {0x1474, 0x00000000, 0xffffffff}, + {0x147c, 0x0000d771, 0xffffffff}, + {0x1494, 0x00030000, 0xffffffff}, + {0x149c, 0x00000300, 0xffffffff}, + {0x14a8, 0x00000000, 0xffffffff}, + {0x14cc, 0xbd09000d, 0xffffffff}, + {0x1504, 0xfffffff1, 0xffffffff}, + {0x150c, 0xffffffe5, 0xffffffff}, + {0x1514, 0x00000000, 0xffffffff}, + {0x151c, 0x00000000, 0xffffffff}, + {0x1538, 0x00000b0b, 0xffffffff}, + {0x153c, 0x00000c0c, 0xffffffff}, + {0x15d0, 0x00000670, 0xffffffff}, + {0x15d4, 0x00000046, 0xffffffff}, + {0x15d8, 0x00000010, 0xffffffff}, + {0x15dc, 0x00000000, 0xffffffff}, + {0x15e0, 0x00000023, 0xffffffff}, + {0x15e4, 0x00203c18, 0xffffffff}, + {0x15ec, 0xf8000019, 0xffffffff}, + {0x16a0, 0xcc000006, 0xffffffff}, /* Clock Delay */ + {0xe4124, 0x08008073, 0xffffffff}, /* AVS BG default */ + {0, 0, 0} +}; + +static struct reg_data ddr3_a38x_667[] = { + /* parameters for 667MHZ */ + /* DDR SDRAM Configuration Register */ + {0x1400, 0x7b00ca28, 0xffffffff}, + /* Dunit Control Low Register - kw28 bit12 low (disable CLK1) */ + {0x1404, 0x36301820, 0xffffffff}, + /* DDR SDRAM Timing (Low) Register */ + {0x1408, 0x43149997, 0xffffffff}, + /* DDR SDRAM Timing (High) Register */ + {0x140c, 0x38411bc7, 0xffffffff}, + /* DDR SDRAM Address Control Register */ + {0x1410, 0x14330000, 0xffffffff}, + /* DDR SDRAM Open Pages Control Register */ + {0x1414, 0x00000700, 0xffffffff}, + /* Dunit Control High Register (2 :1 - bits 15:12 = 0xd) */ + {0x1424, 0x0060f3ff, 0xffffffff}, + /* Dunit Control High Register */ + {0x1428, 0x000f8830, 0xffffffff}, + /* Dunit Control High Register (2:1 - bit 29 = '1') */ + {0x142c, 0x28c50f8, 0xffffffff}, + {0x147c, 0x0000c671, 0xffffffff}, + /* DDR SDRAM ODT Control (Low) Register */ + {0x1494, 0x00030000, 0xffffffff}, + /* DDR SDRAM ODT Control (High) Register, will be configured at WL */ + {0x1498, 0x00000000, 0xffffffff}, + /* DDR Dunit ODT Control Register */ + {0x149c, 0x00000300, 0xffffffff}, + {0x14a8, 0x00000000, 0xffffffff}, /* */ + {0x14cc, 0xbd09000d, 0xffffffff}, /* */ + {0x1474, 0x00000000, 0xffffffff}, + /* Read Data Sample Delays Register */ + {0x1538, 0x00000009, 0xffffffff}, + /* Read Data Ready Delay Register */ + {0x153c, 0x0000000c, 0xffffffff}, + {0x1504, 0xfffffff1, 0xffffffff}, /* */ + {0x150c, 0xffffffe5, 0xffffffff}, /* */ + {0x1514, 0x00000000, 0xffffffff}, /* */ + {0x151c, 0x0, 0xffffffff}, /* */ + {0x15d0, 0x00000650, 0xffffffff}, /* MR0 */ + {0x15d4, 0x00000046, 0xffffffff}, /* MR1 */ + {0x15d8, 0x00000010, 0xffffffff}, /* MR2 */ + {0x15dc, 0x00000000, 0xffffffff}, /* MR3 */ + {0x15e0, 0x23, 0xffffffff}, /* */ + {0x15e4, 0x00203c18, 0xffffffff}, /* ZQC Configuration Register */ + {0x15ec, 0xf8000019, 0xffffffff}, /* DDR PHY */ + {0x16a0, 0xcc000006, 0xffffffff}, /* Clock Delay */ + {0xe4124, 0x08008073, 0xffffffff}, /* AVS BG default */ + {0, 0, 0} +}; + +static struct reg_data ddr3_a38x_533[] = { + /* parameters for 533MHZ */ + /* DDR SDRAM Configuration Register */ + {0x1400, 0x7b00d040, 0xffffffff}, + /* Dunit Control Low Register - kw28 bit12 low (disable CLK1) */ + {0x1404, 0x36301820, 0xffffffff}, + /* DDR SDRAM Timing (Low) Register */ + {0x1408, 0x33137772, 0xffffffff}, + /* DDR SDRAM Timing (High) Register */ + {0x140c, 0x3841199f, 0xffffffff}, + /* DDR SDRAM Address Control Register */ + {0x1410, 0x10330000, 0xffffffff}, + /* DDR SDRAM Open Pages Control Register */ + {0x1414, 0x00000700, 0xffffffff}, + /* Dunit Control High Register (2 :1 - bits 15:12 = 0xd) */ + {0x1424, 0x0060f3ff, 0xffffffff}, + /* Dunit Control High Register */ + {0x1428, 0x000d6720, 0xffffffff}, + /* Dunit Control High Register (2:1 - bit 29 = '1') */ + {0x142c, 0x028c50c3, 0xffffffff}, + {0x147c, 0x0000b571, 0xffffffff}, + /* DDR SDRAM ODT Control (Low) Register */ + {0x1494, 0x00030000, 0xffffffff}, + /* DDR SDRAM ODT Control (High) Register, will be configured at WL */ + {0x1498, 0x00000000, 0xffffffff}, + /* DDR Dunit ODT Control Register */ + {0x149c, 0x00000003, 0xffffffff}, + {0x14a8, 0x00000000, 0xffffffff}, /* */ + {0x14cc, 0xbd09000d, 0xffffffff}, /* */ + {0x1474, 0x00000000, 0xffffffff}, + /* Read Data Sample Delays Register */ + {0x1538, 0x00000707, 0xffffffff}, + /* Read Data Ready Delay Register */ + {0x153c, 0x00000707, 0xffffffff}, + {0x1504, 0xffffffe1, 0xffffffff}, /* */ + {0x150c, 0xffffffe5, 0xffffffff}, /* */ + {0x1514, 0x00000000, 0xffffffff}, /* */ + {0x151c, 0x00000000, 0xffffffff}, /* */ + {0x15d0, 0x00000630, 0xffffffff}, /* MR0 */ + {0x15d4, 0x00000046, 0xffffffff}, /* MR1 */ + {0x15d8, 0x00000008, 0xffffffff}, /* MR2 */ + {0x15dc, 0x00000000, 0xffffffff}, /* MR3 */ + {0x15e0, 0x00000023, 0xffffffff}, /* */ + {0x15e4, 0x00203c18, 0xffffffff}, /* ZQC Configuration Register */ + {0x15ec, 0xf8000019, 0xffffffff}, /* DDR PHY */ + {0x16a0, 0xcc000006, 0xffffffff}, /* Clock Delay */ + {0xe4124, 0x08008073, 0xffffffff}, /* AVS BG default */ + {0, 0, 0} +}; + +#endif /* CONFIG_CUSTOMER_BOARD_SUPPORT */ + +#endif /* SUPPORT_STATIC_DUNIT_CONFIG */ + +#endif /* _DDR3_A38X_MC_STATIC_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_a38x_topology.h b/drivers/ddr/marvell/a38x/ddr3_a38x_topology.h new file mode 100644 index 0000000..f27bbff --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_a38x_topology.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_A38X_TOPOLOGY_H +#define _DDR3_A38X_TOPOLOGY_H + +#include "ddr_topology_def.h" + +/* Bus mask variants */ +#define BUS_MASK_32BIT 0xf +#define BUS_MASK_32BIT_ECC 0x1f +#define BUS_MASK_16BIT 0x3 +#define BUS_MASK_16BIT_ECC 0x13 +#define BUS_MASK_16BIT_ECC_PUP3 0xb + +#define DYNAMIC_CS_SIZE_CONFIG +#define DISABLE_L2_FILTERING_DURING_DDR_TRAINING + +#endif /* _DDR3_A38X_TOPOLOGY_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_a38x_training.c b/drivers/ddr/marvell/a38x/ddr3_a38x_training.c new file mode 100644 index 0000000..52c43f7 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_a38x_training.c @@ -0,0 +1,40 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +/* + * Name: ddr3_tip_init_silicon + * Desc: initiate silicon parameters + * Args: + * Notes: + * Returns: required value + */ +int ddr3_silicon_init(void) +{ + int status; + static int init_done; + + if (init_done == 1) + return MV_OK; + + status = ddr3_tip_init_a38x(0, 0); + if (MV_OK != status) { + printf("DDR3 A38x silicon init - FAILED 0x%x\n", status); + return status; + } + + init_done = 1; + + return MV_OK; +} diff --git a/drivers/ddr/marvell/a38x/ddr3_debug.c b/drivers/ddr/marvell/a38x/ddr3_debug.c new file mode 100644 index 0000000..1d72bc5 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_debug.c @@ -0,0 +1,1551 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +u8 is_reg_dump = 0; +u8 debug_pbs = DEBUG_LEVEL_ERROR; + +/* + * API to change flags outside of the lib + */ +#ifndef SILENT_LIB +/* Debug flags for other Training modules */ +u8 debug_training_static = DEBUG_LEVEL_ERROR; +u8 debug_training = DEBUG_LEVEL_ERROR; +u8 debug_leveling = DEBUG_LEVEL_ERROR; +u8 debug_centralization = DEBUG_LEVEL_ERROR; +u8 debug_training_ip = DEBUG_LEVEL_ERROR; +u8 debug_training_bist = DEBUG_LEVEL_ERROR; +u8 debug_training_hw_alg = DEBUG_LEVEL_ERROR; +u8 debug_training_access = DEBUG_LEVEL_ERROR; +u8 debug_training_a38x = DEBUG_LEVEL_ERROR; + +void ddr3_hws_set_log_level(enum ddr_lib_debug_block block, u8 level) +{ + switch (block) { + case DEBUG_BLOCK_STATIC: + debug_training_static = level; + break; + case DEBUG_BLOCK_TRAINING_MAIN: + debug_training = level; + break; + case DEBUG_BLOCK_LEVELING: + debug_leveling = level; + break; + case DEBUG_BLOCK_CENTRALIZATION: + debug_centralization = level; + break; + case DEBUG_BLOCK_PBS: + debug_pbs = level; + break; + case DEBUG_BLOCK_ALG: + debug_training_hw_alg = level; + break; + case DEBUG_BLOCK_DEVICE: + debug_training_a38x = level; + break; + case DEBUG_BLOCK_ACCESS: + debug_training_access = level; + break; + case DEBUG_STAGES_REG_DUMP: + if (level == DEBUG_LEVEL_TRACE) + is_reg_dump = 1; + else + is_reg_dump = 0; + break; + case DEBUG_BLOCK_ALL: + default: + debug_training_static = level; + debug_training = level; + debug_leveling = level; + debug_centralization = level; + debug_pbs = level; + debug_training_hw_alg = level; + debug_training_access = level; + debug_training_a38x = level; + } +} +#else +void ddr3_hws_set_log_level(enum ddr_lib_debug_block block, u8 level) +{ + return; +} +#endif + +struct hws_tip_config_func_db config_func_info[HWS_MAX_DEVICE_NUM]; +u8 is_default_centralization = 0; +u8 is_tune_result = 0; +u8 is_validate_window_per_if = 0; +u8 is_validate_window_per_pup = 0; +u8 sweep_cnt = 1; +u32 is_bist_reset_bit = 1; +static struct hws_xsb_info xsb_info[HWS_MAX_DEVICE_NUM]; + +/* + * Dump Dunit & Phy registers + */ +int ddr3_tip_reg_dump(u32 dev_num) +{ + u32 if_id, reg_addr, data_value, bus_id; + u32 read_data[MAX_INTERFACE_NUM]; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + printf("-- dunit registers --\n"); + for (reg_addr = 0x1400; reg_addr < 0x19f0; reg_addr += 4) { + printf("0x%x ", reg_addr); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, + if_id, reg_addr, read_data, + MASK_ALL_BITS)); + printf("0x%x ", read_data[if_id]); + } + printf("\n"); + } + + printf("-- Phy registers --\n"); + for (reg_addr = 0; reg_addr <= 0xff; reg_addr++) { + printf("0x%x ", reg_addr); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_id = 0; + bus_id < tm->num_of_bus_per_interface; + bus_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, bus_id, + DDR_PHY_DATA, reg_addr, + &data_value)); + printf("0x%x ", data_value); + } + for (bus_id = 0; + bus_id < tm->num_of_bus_per_interface; + bus_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, bus_id, + DDR_PHY_CONTROL, reg_addr, + &data_value)); + printf("0x%x ", data_value); + } + } + printf("\n"); + } + + return MV_OK; +} + +/* + * Register access func registration + */ +int ddr3_tip_init_config_func(u32 dev_num, + struct hws_tip_config_func_db *config_func) +{ + if (config_func == NULL) + return MV_BAD_PARAM; + + memcpy(&config_func_info[dev_num], config_func, + sizeof(struct hws_tip_config_func_db)); + + return MV_OK; +} + +/* + * Read training result table + */ +int hws_ddr3_tip_read_training_result( + u32 dev_num, enum hws_result result[MAX_STAGE_LIMIT][MAX_INTERFACE_NUM]) +{ + dev_num = dev_num; + + if (result == NULL) + return MV_BAD_PARAM; + memcpy(result, training_result, sizeof(result)); + + return MV_OK; +} + +/* + * Get training result info pointer + */ +enum hws_result *ddr3_tip_get_result_ptr(u32 stage) +{ + return training_result[stage]; +} + +/* + * Device info read + */ +int ddr3_tip_get_device_info(u32 dev_num, struct ddr3_device_info *info_ptr) +{ + if (config_func_info[dev_num].tip_get_device_info_func != NULL) { + return config_func_info[dev_num]. + tip_get_device_info_func((u8) dev_num, info_ptr); + } + + return MV_FAIL; +} + +#ifndef EXCLUDE_SWITCH_DEBUG +/* + * Convert freq to character string + */ +static char *convert_freq(enum hws_ddr_freq freq) +{ + switch (freq) { + case DDR_FREQ_LOW_FREQ: + return "DDR_FREQ_LOW_FREQ"; + case DDR_FREQ_400: + return "400"; + + case DDR_FREQ_533: + return "533"; + case DDR_FREQ_667: + return "667"; + + case DDR_FREQ_800: + return "800"; + + case DDR_FREQ_933: + return "933"; + + case DDR_FREQ_1066: + return "1066"; + case DDR_FREQ_311: + return "311"; + + case DDR_FREQ_333: + return "333"; + + case DDR_FREQ_467: + return "467"; + + case DDR_FREQ_850: + return "850"; + + case DDR_FREQ_900: + return "900"; + + case DDR_FREQ_360: + return "DDR_FREQ_360"; + + case DDR_FREQ_1000: + return "DDR_FREQ_1000"; + default: + return "Unknown Frequency"; + } +} + +/* + * Convert device ID to character string + */ +static char *convert_dev_id(u32 dev_id) +{ + switch (dev_id) { + case 0x6800: + return "A38xx"; + case 0x6900: + return "A39XX"; + case 0xf400: + return "AC3"; + case 0xfc00: + return "BC2"; + + default: + return "Unknown Device"; + } +} + +/* + * Convert device ID to character string + */ +static char *convert_mem_size(u32 dev_id) +{ + switch (dev_id) { + case 0: + return "512 MB"; + case 1: + return "1 GB"; + case 2: + return "2 GB"; + case 3: + return "4 GB"; + case 4: + return "8 GB"; + + default: + return "wrong mem size"; + } +} + +int print_device_info(u8 dev_num) +{ + struct ddr3_device_info info_ptr; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + CHECK_STATUS(ddr3_tip_get_device_info(dev_num, &info_ptr)); + printf("=== DDR setup START===\n"); + printf("\tDevice ID: %s\n", convert_dev_id(info_ptr.device_id)); + printf("\tDDR3 CK delay: %d\n", info_ptr.ck_delay); + print_topology(tm); + printf("=== DDR setup END===\n"); + + return MV_OK; +} + +void hws_ddr3_tip_sweep_test(int enable) +{ + if (enable) { + is_validate_window_per_if = 1; + is_validate_window_per_pup = 1; + debug_training = DEBUG_LEVEL_TRACE; + } else { + is_validate_window_per_if = 0; + is_validate_window_per_pup = 0; + } +} +#endif + +char *ddr3_tip_convert_tune_result(enum hws_result tune_result) +{ + switch (tune_result) { + case TEST_FAILED: + return "FAILED"; + case TEST_SUCCESS: + return "PASS"; + case NO_TEST_DONE: + return "NOT COMPLETED"; + default: + return "Un-KNOWN"; + } +} + +/* + * Print log info + */ +int ddr3_tip_print_log(u32 dev_num, u32 mem_addr) +{ + u32 if_id = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + mem_addr = mem_addr; + +#ifndef EXCLUDE_SWITCH_DEBUG + if ((is_validate_window_per_if != 0) || + (is_validate_window_per_pup != 0)) { + u32 is_pup_log = 0; + enum hws_ddr_freq freq; + + freq = tm->interface_params[first_active_if].memory_freq; + + is_pup_log = (is_validate_window_per_pup != 0) ? 1 : 0; + printf("===VALIDATE WINDOW LOG START===\n"); + printf("DDR Frequency: %s ======\n", convert_freq(freq)); + /* print sweep windows */ + ddr3_tip_run_sweep_test(dev_num, sweep_cnt, 1, is_pup_log); + ddr3_tip_run_sweep_test(dev_num, sweep_cnt, 0, is_pup_log); + ddr3_tip_print_all_pbs_result(dev_num); + ddr3_tip_print_wl_supp_result(dev_num); + printf("===VALIDATE WINDOW LOG END ===\n"); + CHECK_STATUS(ddr3_tip_restore_dunit_regs(dev_num)); + ddr3_tip_reg_dump(dev_num); + } +#endif + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("IF %d Status:\n", if_id)); + + if (mask_tune_func & INIT_CONTROLLER_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tInit Controller: %s\n", + ddr3_tip_convert_tune_result + (training_result[INIT_CONTROLLER] + [if_id]))); + } + if (mask_tune_func & SET_LOW_FREQ_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tLow freq Config: %s\n", + ddr3_tip_convert_tune_result + (training_result[SET_LOW_FREQ] + [if_id]))); + } + if (mask_tune_func & LOAD_PATTERN_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tLoad Pattern: %s\n", + ddr3_tip_convert_tune_result + (training_result[LOAD_PATTERN] + [if_id]))); + } + if (mask_tune_func & SET_MEDIUM_FREQ_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tMedium freq Config: %s\n", + ddr3_tip_convert_tune_result + (training_result[SET_MEDIUM_FREQ] + [if_id]))); + } + if (mask_tune_func & WRITE_LEVELING_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tWL: %s\n", + ddr3_tip_convert_tune_result + (training_result[WRITE_LEVELING] + [if_id]))); + } + if (mask_tune_func & LOAD_PATTERN_2_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tLoad Pattern: %s\n", + ddr3_tip_convert_tune_result + (training_result[LOAD_PATTERN_2] + [if_id]))); + } + if (mask_tune_func & READ_LEVELING_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tRL: %s\n", + ddr3_tip_convert_tune_result + (training_result[READ_LEVELING] + [if_id]))); + } + if (mask_tune_func & WRITE_LEVELING_SUPP_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tWL Supp: %s\n", + ddr3_tip_convert_tune_result + (training_result[WRITE_LEVELING_SUPP] + [if_id]))); + } + if (mask_tune_func & PBS_RX_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tPBS RX: %s\n", + ddr3_tip_convert_tune_result + (training_result[PBS_RX] + [if_id]))); + } + if (mask_tune_func & PBS_TX_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tPBS TX: %s\n", + ddr3_tip_convert_tune_result + (training_result[PBS_TX] + [if_id]))); + } + if (mask_tune_func & SET_TARGET_FREQ_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tTarget freq Config: %s\n", + ddr3_tip_convert_tune_result + (training_result[SET_TARGET_FREQ] + [if_id]))); + } + if (mask_tune_func & WRITE_LEVELING_TF_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tWL TF: %s\n", + ddr3_tip_convert_tune_result + (training_result[WRITE_LEVELING_TF] + [if_id]))); + } + if (mask_tune_func & READ_LEVELING_TF_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tRL TF: %s\n", + ddr3_tip_convert_tune_result + (training_result[READ_LEVELING_TF] + [if_id]))); + } + if (mask_tune_func & WRITE_LEVELING_SUPP_TF_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tWL TF Supp: %s\n", + ddr3_tip_convert_tune_result + (training_result + [WRITE_LEVELING_SUPP_TF] + [if_id]))); + } + if (mask_tune_func & CENTRALIZATION_RX_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tCentr RX: %s\n", + ddr3_tip_convert_tune_result + (training_result[CENTRALIZATION_RX] + [if_id]))); + } + if (mask_tune_func & VREF_CALIBRATION_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tVREF_CALIBRATION: %s\n", + ddr3_tip_convert_tune_result + (training_result[VREF_CALIBRATION] + [if_id]))); + } + if (mask_tune_func & CENTRALIZATION_TX_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tCentr TX: %s\n", + ddr3_tip_convert_tune_result + (training_result[CENTRALIZATION_TX] + [if_id]))); + } + } + + return MV_OK; +} + +/* + * Print stability log info + */ +int ddr3_tip_print_stability_log(u32 dev_num) +{ + u8 if_id = 0, csindex = 0, bus_id = 0, idx = 0; + u32 reg_data; + u32 read_data[MAX_INTERFACE_NUM]; + u32 max_cs = hws_ddr3_tip_max_cs_get(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* Title print */ + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + printf("Title: I/F# , Tj, Calibration_n0, Calibration_p0, Calibration_n1, Calibration_p1, Calibration_n2, Calibration_p2,"); + for (csindex = 0; csindex < max_cs; csindex++) { + printf("CS%d , ", csindex); + printf("\n"); + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + printf("VWTx, VWRx, WL_tot, WL_ADLL, WL_PH, RL_Tot, RL_ADLL, RL_PH, RL_Smp, Cen_tx, Cen_rx, Vref, DQVref,"); + printf("\t\t"); + for (idx = 0; idx < 11; idx++) + printf("PBSTx-Pad%d,", idx); + printf("\t\t"); + for (idx = 0; idx < 11; idx++) + printf("PBSRx-Pad%d,", idx); + } + } + printf("\n"); + + /* Data print */ + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + + printf("Data: %d,%d,", if_id, + (config_func_info[dev_num].tip_get_temperature != NULL) + ? (config_func_info[dev_num]. + tip_get_temperature(dev_num)) : (0)); + + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x14c8, + read_data, MASK_ALL_BITS)); + printf("%d,%d,", ((read_data[if_id] & 0x3f0) >> 4), + ((read_data[if_id] & 0xfc00) >> 10)); + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x17c8, + read_data, MASK_ALL_BITS)); + printf("%d,%d,", ((read_data[if_id] & 0x3f0) >> 4), + ((read_data[if_id] & 0xfc00) >> 10)); + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x1dc8, + read_data, MASK_ALL_BITS)); + printf("%d,%d,", ((read_data[if_id] & 0x3f0000) >> 16), + ((read_data[if_id] & 0xfc00000) >> 22)); + + for (csindex = 0; csindex < max_cs; csindex++) { + printf("CS%d , ", csindex); + for (bus_id = 0; bus_id < MAX_BUS_NUM; bus_id++) { + printf("\n"); + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, + bus_id, DDR_PHY_DATA, + RESULT_DB_PHY_REG_ADDR + + csindex, ®_data); + printf("%d,%d,", (reg_data & 0x1f), + ((reg_data & 0x3e0) >> 5)); + /* WL */ + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, + bus_id, DDR_PHY_DATA, + WL_PHY_REG + + csindex * 4, ®_data); + printf("%d,%d,%d,", + (reg_data & 0x1f) + + ((reg_data & 0x1c0) >> 6) * 32, + (reg_data & 0x1f), + (reg_data & 0x1c0) >> 6); + /* RL */ + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, + if_id, + READ_DATA_SAMPLE_DELAY, + read_data, MASK_ALL_BITS)); + read_data[if_id] = + (read_data[if_id] & + (0xf << (4 * csindex))) >> + (4 * csindex); + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, bus_id, + DDR_PHY_DATA, + RL_PHY_REG + csindex * 4, + ®_data); + printf("%d,%d,%d,%d,", + (reg_data & 0x1f) + + ((reg_data & 0x1c0) >> 6) * 32 + + read_data[if_id] * 64, + (reg_data & 0x1f), + ((reg_data & 0x1c0) >> 6), + read_data[if_id]); + /* Centralization */ + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, bus_id, + DDR_PHY_DATA, + WRITE_CENTRALIZATION_PHY_REG + + csindex * 4, ®_data); + printf("%d,", (reg_data & 0x3f)); + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, bus_id, + DDR_PHY_DATA, + READ_CENTRALIZATION_PHY_REG + + csindex * 4, ®_data); + printf("%d,", (reg_data & 0x1f)); + /* Vref */ + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, bus_id, + DDR_PHY_DATA, + PAD_CONFIG_PHY_REG, + ®_data); + printf("%d,", (reg_data & 0x7)); + /* DQVref */ + /* Need to add the Read Function from device */ + printf("%d,", 0); + printf("\t\t"); + for (idx = 0; idx < 11; idx++) { + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, + bus_id, DDR_PHY_DATA, + 0xd0 + + 12 * csindex + + idx, ®_data); + printf("%d,", (reg_data & 0x3f)); + } + printf("\t\t"); + for (idx = 0; idx < 11; idx++) { + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, + bus_id, DDR_PHY_DATA, + 0x10 + + 16 * csindex + + idx, ®_data); + printf("%d,", (reg_data & 0x3f)); + } + printf("\t\t"); + for (idx = 0; idx < 11; idx++) { + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, + bus_id, DDR_PHY_DATA, + 0x50 + + 16 * csindex + + idx, ®_data); + printf("%d,", (reg_data & 0x3f)); + } + } + } + } + printf("\n"); + + return MV_OK; +} + +/* + * Register XSB information + */ +int ddr3_tip_register_xsb_info(u32 dev_num, struct hws_xsb_info *xsb_info_table) +{ + memcpy(&xsb_info[dev_num], xsb_info_table, sizeof(struct hws_xsb_info)); + return MV_OK; +} + +/* + * Read ADLL Value + */ +int read_adll_value(u32 pup_values[MAX_INTERFACE_NUM * MAX_BUS_NUM], + int reg_addr, u32 mask) +{ + u32 data_value; + u32 if_id = 0, bus_id = 0; + u32 dev_num = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* + * multi CS support - reg_addr is calucalated in calling function + * with CS offset + */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; + bus_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + CHECK_STATUS(ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, + bus_id, + DDR_PHY_DATA, reg_addr, + &data_value)); + pup_values[if_id * + tm->num_of_bus_per_interface + bus_id] = + data_value & mask; + } + } + + return 0; +} + +/* + * Write ADLL Value + */ +int write_adll_value(u32 pup_values[MAX_INTERFACE_NUM * MAX_BUS_NUM], + int reg_addr) +{ + u32 if_id = 0, bus_id = 0; + u32 dev_num = 0, data; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* + * multi CS support - reg_addr is calucalated in calling function + * with CS offset + */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; + bus_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + data = pup_values[if_id * + tm->num_of_bus_per_interface + + bus_id]; + CHECK_STATUS(ddr3_tip_bus_write(dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, + bus_id, DDR_PHY_DATA, + reg_addr, data)); + } + } + + return 0; +} + +#ifndef EXCLUDE_SWITCH_DEBUG +u32 rl_version = 1; /* 0 - old RL machine */ +struct hws_tip_config_func_db config_func_info[HWS_MAX_DEVICE_NUM]; +u32 start_xsb_offset = 0; +u8 is_rl_old = 0; +u8 is_freq_old = 0; +u8 is_dfs_disabled = 0; +u32 default_centrlization_value = 0x12; +u32 vref = 0x4; +u32 activate_select_before_run_alg = 1, activate_deselect_after_run_alg = 1, + rl_test = 0, reset_read_fifo = 0; +int debug_acc = 0; +u32 ctrl_sweepres[ADLL_LENGTH][MAX_INTERFACE_NUM][MAX_BUS_NUM]; +u32 ctrl_adll[MAX_CS_NUM * MAX_INTERFACE_NUM * MAX_BUS_NUM]; +u8 cs_mask_reg[] = { + 0, 4, 8, 12, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 +}; + +u32 xsb_test_table[][8] = { + {0x00000000, 0x11111111, 0x22222222, 0x33333333, 0x44444444, 0x55555555, + 0x66666666, 0x77777777}, + {0x88888888, 0x99999999, 0xaaaaaaaa, 0xbbbbbbbb, 0xcccccccc, 0xdddddddd, + 0xeeeeeeee, 0xffffffff}, + {0x00000000, 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff}, + {0x00000000, 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff}, + {0x00000000, 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff}, + {0x00000000, 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff}, + {0x00000000, 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff}, + {0x00000000, 0x00000000, 0x00000000, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000}, + {0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0xffffffff, 0xffffffff} +}; + +static int ddr3_tip_access_atr(u32 dev_num, u32 flag_id, u32 value, u32 **ptr); + +int ddr3_tip_print_adll(void) +{ + u32 bus_cnt = 0, if_id, data_p1, data_p2, ui_data3, dev_num = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_cnt = 0; bus_cnt < GET_TOPOLOGY_NUM_OF_BUSES(); + bus_cnt++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_cnt); + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, bus_cnt, + DDR_PHY_DATA, 0x1, &data_p1)); + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, ACCESS_TYPE_UNICAST, + bus_cnt, DDR_PHY_DATA, 0x2, &data_p2)); + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, ACCESS_TYPE_UNICAST, + bus_cnt, DDR_PHY_DATA, 0x3, &ui_data3)); + DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, + (" IF %d bus_cnt %d phy_reg_1_data 0x%x phy_reg_2_data 0x%x phy_reg_3_data 0x%x\n", + if_id, bus_cnt, data_p1, data_p2, + ui_data3)); + } + } + + return MV_OK; +} + +/* + * Set attribute value + */ +int ddr3_tip_set_atr(u32 dev_num, u32 flag_id, u32 value) +{ + int ret; + u32 *ptr_flag = NULL; + + ret = ddr3_tip_access_atr(dev_num, flag_id, value, &ptr_flag); + if (ptr_flag != NULL) { + printf("ddr3_tip_set_atr Flag ID 0x%x value is set to 0x%x (was 0x%x)\n", + flag_id, value, *ptr_flag); + *ptr_flag = value; + } else { + printf("ddr3_tip_set_atr Flag ID 0x%x value is set to 0x%x\n", + flag_id, value); + } + + return ret; +} + +/* + * Access attribute + */ +static int ddr3_tip_access_atr(u32 dev_num, u32 flag_id, u32 value, u32 **ptr) +{ + u32 tmp_val = 0, if_id = 0, pup_id = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + dev_num = dev_num; + *ptr = NULL; + + switch (flag_id) { + case 0: + *ptr = (u32 *)&(tm->if_act_mask); + break; + + case 0x1: + *ptr = (u32 *)&mask_tune_func; + break; + + case 0x2: + *ptr = (u32 *)&low_freq; + break; + + case 0x3: + *ptr = (u32 *)&medium_freq; + break; + + case 0x4: + *ptr = (u32 *)&generic_init_controller; + break; + + case 0x5: + *ptr = (u32 *)&rl_version; + break; + + case 0x8: + *ptr = (u32 *)&start_xsb_offset; + break; + + case 0x20: + *ptr = (u32 *)&is_rl_old; + break; + + case 0x21: + *ptr = (u32 *)&is_freq_old; + break; + + case 0x23: + *ptr = (u32 *)&is_dfs_disabled; + break; + + case 0x24: + *ptr = (u32 *)&is_pll_before_init; + break; + + case 0x25: + *ptr = (u32 *)&is_adll_calib_before_init; + break; +#ifdef STATIC_ALGO_SUPPORT + case 0x26: + *ptr = (u32 *)&(silicon_delay[0]); + break; + + case 0x27: + *ptr = (u32 *)&wl_debug_delay; + break; +#endif + case 0x28: + *ptr = (u32 *)&is_tune_result; + break; + + case 0x29: + *ptr = (u32 *)&is_validate_window_per_if; + break; + + case 0x2a: + *ptr = (u32 *)&is_validate_window_per_pup; + break; + + case 0x30: + *ptr = (u32 *)&sweep_cnt; + break; + + case 0x31: + *ptr = (u32 *)&is_bist_reset_bit; + break; + + case 0x32: + *ptr = (u32 *)&is_dfs_in_init; + break; + + case 0x33: + *ptr = (u32 *)&p_finger; + break; + + case 0x34: + *ptr = (u32 *)&n_finger; + break; + + case 0x35: + *ptr = (u32 *)&init_freq; + break; + + case 0x36: + *ptr = (u32 *)&(freq_val[DDR_FREQ_LOW_FREQ]); + break; + + case 0x37: + *ptr = (u32 *)&start_pattern; + break; + + case 0x38: + *ptr = (u32 *)&end_pattern; + break; + + case 0x39: + *ptr = (u32 *)&phy_reg0_val; + break; + + case 0x4a: + *ptr = (u32 *)&phy_reg1_val; + break; + + case 0x4b: + *ptr = (u32 *)&phy_reg2_val; + break; + + case 0x4c: + *ptr = (u32 *)&phy_reg3_val; + break; + + case 0x4e: + *ptr = (u32 *)&sweep_pattern; + break; + + case 0x50: + *ptr = (u32 *)&is_rzq6; + break; + + case 0x51: + *ptr = (u32 *)&znri_data_phy_val; + break; + + case 0x52: + *ptr = (u32 *)&zpri_data_phy_val; + break; + + case 0x53: + *ptr = (u32 *)&finger_test; + break; + + case 0x54: + *ptr = (u32 *)&n_finger_start; + break; + + case 0x55: + *ptr = (u32 *)&n_finger_end; + break; + + case 0x56: + *ptr = (u32 *)&p_finger_start; + break; + + case 0x57: + *ptr = (u32 *)&p_finger_end; + break; + + case 0x58: + *ptr = (u32 *)&p_finger_step; + break; + + case 0x59: + *ptr = (u32 *)&n_finger_step; + break; + + case 0x5a: + *ptr = (u32 *)&znri_ctrl_phy_val; + break; + + case 0x5b: + *ptr = (u32 *)&zpri_ctrl_phy_val; + break; + + case 0x5c: + *ptr = (u32 *)&is_reg_dump; + break; + + case 0x5d: + *ptr = (u32 *)&vref; + break; + + case 0x5e: + *ptr = (u32 *)&mode2_t; + break; + + case 0x5f: + *ptr = (u32 *)&xsb_validate_type; + break; + + case 0x60: + *ptr = (u32 *)&xsb_validation_base_address; + break; + + case 0x67: + *ptr = (u32 *)&activate_select_before_run_alg; + break; + + case 0x68: + *ptr = (u32 *)&activate_deselect_after_run_alg; + break; + + case 0x69: + *ptr = (u32 *)&odt_additional; + break; + + case 0x70: + *ptr = (u32 *)&debug_mode; + break; + + case 0x71: + *ptr = (u32 *)&pbs_pattern; + break; + + case 0x72: + *ptr = (u32 *)&delay_enable; + break; + + case 0x73: + *ptr = (u32 *)&ck_delay; + break; + + case 0x74: + *ptr = (u32 *)&ck_delay_16; + break; + + case 0x75: + *ptr = (u32 *)&ca_delay; + break; + + case 0x100: + *ptr = (u32 *)&debug_dunit; + break; + + case 0x101: + debug_acc = (int)value; + break; + + case 0x102: + debug_training = (u8)value; + break; + + case 0x103: + debug_training_bist = (u8)value; + break; + + case 0x104: + debug_centralization = (u8)value; + break; + + case 0x105: + debug_training_ip = (u8)value; + break; + + case 0x106: + debug_leveling = (u8)value; + break; + + case 0x107: + debug_pbs = (u8)value; + break; + + case 0x108: + debug_training_static = (u8)value; + break; + + case 0x109: + debug_training_access = (u8)value; + break; + + case 0x112: + *ptr = &start_pattern; + break; + + case 0x113: + *ptr = &end_pattern; + break; + + default: + if ((flag_id >= 0x200) && (flag_id < 0x210)) { + if_id = flag_id - 0x200; + *ptr = (u32 *)&(tm->interface_params + [if_id].memory_freq); + } else if ((flag_id >= 0x210) && (flag_id < 0x220)) { + if_id = flag_id - 0x210; + *ptr = (u32 *)&(tm->interface_params + [if_id].speed_bin_index); + } else if ((flag_id >= 0x220) && (flag_id < 0x230)) { + if_id = flag_id - 0x220; + *ptr = (u32 *)&(tm->interface_params + [if_id].bus_width); + } else if ((flag_id >= 0x230) && (flag_id < 0x240)) { + if_id = flag_id - 0x230; + *ptr = (u32 *)&(tm->interface_params + [if_id].memory_size); + } else if ((flag_id >= 0x240) && (flag_id < 0x250)) { + if_id = flag_id - 0x240; + *ptr = (u32 *)&(tm->interface_params + [if_id].cas_l); + } else if ((flag_id >= 0x250) && (flag_id < 0x260)) { + if_id = flag_id - 0x250; + *ptr = (u32 *)&(tm->interface_params + [if_id].cas_wl); + } else if ((flag_id >= 0x270) && (flag_id < 0x2cf)) { + if_id = (flag_id - 0x270) / MAX_BUS_NUM; + pup_id = (flag_id - 0x270) % MAX_BUS_NUM; + *ptr = (u32 *)&(tm->interface_params[if_id]. + as_bus_params[pup_id].is_ck_swap); + } else if ((flag_id >= 0x2d0) && (flag_id < 0x32f)) { + if_id = (flag_id - 0x2d0) / MAX_BUS_NUM; + pup_id = (flag_id - 0x2d0) % MAX_BUS_NUM; + *ptr = (u32 *)&(tm->interface_params[if_id]. + as_bus_params[pup_id].is_dqs_swap); + } else if ((flag_id >= 0x330) && (flag_id < 0x38f)) { + if_id = (flag_id - 0x330) / MAX_BUS_NUM; + pup_id = (flag_id - 0x330) % MAX_BUS_NUM; + *ptr = (u32 *)&(tm->interface_params[if_id]. + as_bus_params[pup_id].cs_bitmask); + } else if ((flag_id >= 0x390) && (flag_id < 0x3ef)) { + if_id = (flag_id - 0x390) / MAX_BUS_NUM; + pup_id = (flag_id - 0x390) % MAX_BUS_NUM; + *ptr = (u32 *)&(tm->interface_params + [if_id].as_bus_params + [pup_id].mirror_enable_bitmask); + } else if ((flag_id >= 0x500) && (flag_id <= 0x50f)) { + tmp_val = flag_id - 0x320; + *ptr = (u32 *)&(clamp_tbl[tmp_val]); + } else { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("flag_id out of boundary %d\n", + flag_id)); + return MV_BAD_PARAM; + } + } + + return MV_OK; +} + +#ifndef EXCLUDE_SWITCH_DEBUG +/* + * Print ADLL + */ +int print_adll(u32 dev_num, u32 adll[MAX_INTERFACE_NUM * MAX_BUS_NUM]) +{ + u32 i, j; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + dev_num = dev_num; + + for (j = 0; j < tm->num_of_bus_per_interface; j++) { + VALIDATE_ACTIVE(tm->bus_act_mask, j); + for (i = 0; i < MAX_INTERFACE_NUM; i++) { + printf("%d ,", + adll[i * tm->num_of_bus_per_interface + j]); + } + } + printf("\n"); + + return MV_OK; +} +#endif + +/* byte_index - only byte 0, 1, 2, or 3, oxff - test all bytes */ +static u32 ddr3_tip_compare(u32 if_id, u32 *p_src, u32 *p_dst, + u32 byte_index) +{ + u32 burst_cnt = 0, addr_offset, i_id; + int b_is_fail = 0; + + addr_offset = + (byte_index == + 0xff) ? (u32) 0xffffffff : (u32) (0xff << (byte_index * 8)); + for (burst_cnt = 0; burst_cnt < EXT_ACCESS_BURST_LENGTH; burst_cnt++) { + if ((p_src[burst_cnt] & addr_offset) != + (p_dst[burst_cnt] & addr_offset)) + b_is_fail = 1; + } + + if (b_is_fail == 1) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("IF %d exp: ", if_id)); + for (i_id = 0; i_id <= MAX_INTERFACE_NUM - 1; i_id++) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("0x%8x ", p_src[i_id])); + } + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("\n_i_f %d rcv: ", if_id)); + for (i_id = 0; i_id <= MAX_INTERFACE_NUM - 1; i_id++) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("(0x%8x ", p_dst[i_id])); + } + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("\n ")); + } + + return b_is_fail; +} + +/* test_type = 0-tx , 1-rx */ +int ddr3_tip_sweep_test(u32 dev_num, u32 test_type, + u32 mem_addr, u32 is_modify_adll, + u32 start_if, u32 end_if, u32 startpup, u32 endpup) +{ + u32 bus_cnt = 0, adll_val = 0, if_id, ui_prev_adll, ui_mask_bit, + end_adll, start_adll; + u32 reg_addr = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + mem_addr = mem_addr; + + if (test_type == 0) { + reg_addr = 1; + ui_mask_bit = 0x3f; + start_adll = 0; + end_adll = ui_mask_bit; + } else { + reg_addr = 3; + ui_mask_bit = 0x1f; + start_adll = 0; + end_adll = ui_mask_bit; + } + + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("==============================\n")); + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("Test type %d (0-tx, 1-rx)\n", test_type)); + + for (if_id = start_if; if_id <= end_if; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_cnt = startpup; bus_cnt < endpup; bus_cnt++) { + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, ACCESS_TYPE_UNICAST, + bus_cnt, DDR_PHY_DATA, reg_addr, + &ui_prev_adll)); + + for (adll_val = start_adll; adll_val <= end_adll; + adll_val++) { + if (is_modify_adll == 1) { + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, bus_cnt, + DDR_PHY_DATA, reg_addr, + adll_val, ui_mask_bit)); + } + } + if (is_modify_adll == 1) { + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, + bus_cnt, DDR_PHY_DATA, reg_addr, + ui_prev_adll)); + } + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("\n")); + } + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("\n")); + } + + return MV_OK; +} + +#ifndef EXCLUDE_SWITCH_DEBUG +/* + * Sweep validation + */ +int ddr3_tip_run_sweep_test(int dev_num, u32 repeat_num, u32 direction, + u32 mode) +{ + u32 pup = 0, start_pup = 0, end_pup = 0; + u32 adll = 0; + u32 res[MAX_INTERFACE_NUM] = { 0 }; + int if_id = 0; + u32 adll_value = 0; + int reg = (direction == 0) ? WRITE_CENTRALIZATION_PHY_REG : + READ_CENTRALIZATION_PHY_REG; + enum hws_access_type pup_access; + u32 cs; + u32 max_cs = hws_ddr3_tip_max_cs_get(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + repeat_num = repeat_num; + + if (mode == 1) { + /* per pup */ + start_pup = 0; + end_pup = tm->num_of_bus_per_interface - 1; + pup_access = ACCESS_TYPE_UNICAST; + } else { + start_pup = 0; + end_pup = 0; + pup_access = ACCESS_TYPE_MULTICAST; + } + + for (cs = 0; cs < max_cs; cs++) { + for (adll = 0; adll < ADLL_LENGTH; adll++) { + for (if_id = 0; + if_id <= MAX_INTERFACE_NUM - 1; + if_id++) { + VALIDATE_ACTIVE + (tm->if_act_mask, + if_id); + for (pup = start_pup; pup <= end_pup; pup++) { + ctrl_sweepres[adll][if_id][pup] = + 0; + } + } + } + + for (adll = 0; adll < (MAX_INTERFACE_NUM * MAX_BUS_NUM); adll++) + ctrl_adll[adll] = 0; + /* Save DQS value(after algorithm run) */ + read_adll_value(ctrl_adll, + (reg + (cs * CS_REGISTER_ADDR_OFFSET)), + MASK_ALL_BITS); + + /* + * Sweep ADLL from 0:31 on all I/F on all Pup and perform + * BIST on each stage. + */ + for (pup = start_pup; pup <= end_pup; pup++) { + for (adll = 0; adll < ADLL_LENGTH; adll++) { + adll_value = + (direction == 0) ? (adll * 2) : adll; + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, 0, + pup_access, pup, DDR_PHY_DATA, + reg + CS_REG_VALUE(cs), + adll_value)); + hws_ddr3_run_bist(dev_num, sweep_pattern, res, + cs); + /* ddr3_tip_reset_fifo_ptr(dev_num); */ + for (if_id = 0; + if_id <= MAX_INTERFACE_NUM - 1; + if_id++) { + VALIDATE_ACTIVE + (tm->if_act_mask, + if_id); + ctrl_sweepres[adll][if_id][pup] + = res[if_id]; + if (mode == 1) { + CHECK_STATUS + (ddr3_tip_bus_write + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, + pup, + DDR_PHY_DATA, + reg + CS_REG_VALUE(cs), + ctrl_adll[if_id * + cs * + tm->num_of_bus_per_interface + + pup])); + } + } + } + } + printf("Final, CS %d,%s, Sweep, Result, Adll,", cs, + ((direction == 0) ? "TX" : "RX")); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + if (mode == 1) { + for (pup = start_pup; pup <= end_pup; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + printf("I/F%d-PHY%d , ", if_id, pup); + } + } else { + printf("I/F%d , ", if_id); + } + } + printf("\n"); + + for (adll = 0; adll < ADLL_LENGTH; adll++) { + adll_value = (direction == 0) ? (adll * 2) : adll; + printf("Final,%s, Sweep, Result, %d ,", + ((direction == 0) ? "TX" : "RX"), adll_value); + + for (if_id = 0; + if_id <= MAX_INTERFACE_NUM - 1; + if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (pup = start_pup; pup <= end_pup; pup++) { + printf("%d , ", + ctrl_sweepres[adll][if_id] + [pup]); + } + } + printf("\n"); + } + + /* + * Write back to the phy the Rx DQS value, we store in + * the beginning. + */ + write_adll_value(ctrl_adll, + (reg + cs * CS_REGISTER_ADDR_OFFSET)); + /* print adll results */ + read_adll_value(ctrl_adll, (reg + cs * CS_REGISTER_ADDR_OFFSET), + MASK_ALL_BITS); + printf("%s, DQS, ADLL,,,", (direction == 0) ? "Tx" : "Rx"); + print_adll(dev_num, ctrl_adll); + } + ddr3_tip_reset_fifo_ptr(dev_num); + + return 0; +} + +void print_topology(struct hws_topology_map *topology_db) +{ + u32 ui, uj; + + printf("\tinterface_mask: 0x%x\n", topology_db->if_act_mask); + printf("\tNum Bus: %d\n", topology_db->num_of_bus_per_interface); + printf("\tbus_act_mask: 0x%x\n", topology_db->bus_act_mask); + + for (ui = 0; ui < MAX_INTERFACE_NUM; ui++) { + VALIDATE_ACTIVE(topology_db->if_act_mask, ui); + printf("\n\tInterface ID: %d\n", ui); + printf("\t\tDDR Frequency: %s\n", + convert_freq(topology_db-> + interface_params[ui].memory_freq)); + printf("\t\tSpeed_bin: %d\n", + topology_db->interface_params[ui].speed_bin_index); + printf("\t\tBus_width: %d\n", + (4 << topology_db->interface_params[ui].bus_width)); + printf("\t\tMem_size: %s\n", + convert_mem_size(topology_db-> + interface_params[ui].memory_size)); + printf("\t\tCAS-WL: %d\n", + topology_db->interface_params[ui].cas_wl); + printf("\t\tCAS-L: %d\n", + topology_db->interface_params[ui].cas_l); + printf("\t\tTemperature: %d\n", + topology_db->interface_params[ui].interface_temp); + printf("\n"); + for (uj = 0; uj < 4; uj++) { + printf("\t\tBus %d parameters- CS Mask: 0x%x\t", uj, + topology_db->interface_params[ui]. + as_bus_params[uj].cs_bitmask); + printf("Mirror: 0x%x\t", + topology_db->interface_params[ui]. + as_bus_params[uj].mirror_enable_bitmask); + printf("DQS Swap is %s \t", + (topology_db-> + interface_params[ui].as_bus_params[uj]. + is_dqs_swap == 1) ? "enabled" : "disabled"); + printf("Ck Swap:%s\t", + (topology_db-> + interface_params[ui].as_bus_params[uj]. + is_ck_swap == 1) ? "enabled" : "disabled"); + printf("\n"); + } + } +} +#endif + +/* + * Execute XSB Test transaction (rd/wr/both) + */ +int run_xsb_test(u32 dev_num, u32 mem_addr, u32 write_type, + u32 read_type, u32 burst_length) +{ + u32 seq = 0, if_id = 0, addr, cnt; + int ret = MV_OK, ret_tmp; + u32 data_read[MAX_INTERFACE_NUM]; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + addr = mem_addr; + for (cnt = 0; cnt <= burst_length; cnt++) { + seq = (seq + 1) % 8; + if (write_type != 0) { + CHECK_STATUS(ddr3_tip_ext_write + (dev_num, if_id, addr, 1, + xsb_test_table[seq])); + } + if (read_type != 0) { + CHECK_STATUS(ddr3_tip_ext_read + (dev_num, if_id, addr, 1, + data_read)); + } + if ((read_type != 0) && (write_type != 0)) { + ret_tmp = + ddr3_tip_compare(if_id, + xsb_test_table[seq], + data_read, + 0xff); + addr += (EXT_ACCESS_BURST_LENGTH * 4); + ret = (ret != MV_OK) ? ret : ret_tmp; + } + } + } + + return ret; +} + +#else /*EXCLUDE_SWITCH_DEBUG */ + +u32 rl_version = 1; /* 0 - old RL machine */ +u32 vref = 0x4; +u32 start_xsb_offset = 0; +u8 cs_mask_reg[] = { + 0, 4, 8, 12, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 +}; + +int run_xsb_test(u32 dev_num, u32 mem_addr, u32 write_type, + u32 read_type, u32 burst_length) +{ + return MV_OK; +} + +#endif diff --git a/drivers/ddr/marvell/a38x/ddr3_hws_hw_training.c b/drivers/ddr/marvell/a38x/ddr3_hws_hw_training.c new file mode 100644 index 0000000..560da7e --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_hws_hw_training.c @@ -0,0 +1,148 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +#define REG_READ_DATA_SAMPLE_DELAYS_ADDR 0x1538 +#define REG_READ_DATA_SAMPLE_DELAYS_MASK 0x1f +#define REG_READ_DATA_SAMPLE_DELAYS_OFFS 8 + +#define REG_READ_DATA_READY_DELAYS_ADDR 0x153c +#define REG_READ_DATA_READY_DELAYS_MASK 0x1f +#define REG_READ_DATA_READY_DELAYS_OFFS 8 + +int ddr3_if_ecc_enabled(void) +{ + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (DDR3_IS_ECC_PUP4_MODE(tm->bus_act_mask) || + DDR3_IS_ECC_PUP3_MODE(tm->bus_act_mask)) + return 1; + else + return 0; +} + +int ddr3_pre_algo_config(void) +{ + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* Set Bus3 ECC training mode */ + if (DDR3_IS_ECC_PUP3_MODE(tm->bus_act_mask)) { + /* Set Bus3 ECC MUX */ + CHECK_STATUS(ddr3_tip_if_write + (0, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + REG_SDRAM_PINS_MUX, 0x100, 0x100)); + } + + /* Set regular ECC training mode (bus4 and bus 3) */ + if ((DDR3_IS_ECC_PUP4_MODE(tm->bus_act_mask)) || + (DDR3_IS_ECC_PUP3_MODE(tm->bus_act_mask))) { + /* Enable ECC Write MUX */ + CHECK_STATUS(ddr3_tip_if_write + (0, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x100, 0x100)); + /* General ECC enable */ + CHECK_STATUS(ddr3_tip_if_write + (0, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + REG_SDRAM_CONFIG_ADDR, 0x40000, 0x40000)); + /* Disable Read Data ECC MUX */ + CHECK_STATUS(ddr3_tip_if_write + (0, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x0, 0x2)); + } + + return MV_OK; +} + +int ddr3_post_algo_config(void) +{ + struct hws_topology_map *tm = ddr3_get_topology_map(); + int status; + + status = ddr3_post_run_alg(); + if (MV_OK != status) { + printf("DDR3 Post Run Alg - FAILED 0x%x\n", status); + return status; + } + + /* Un_set ECC training mode */ + if ((DDR3_IS_ECC_PUP4_MODE(tm->bus_act_mask)) || + (DDR3_IS_ECC_PUP3_MODE(tm->bus_act_mask))) { + /* Disable ECC Write MUX */ + CHECK_STATUS(ddr3_tip_if_write + (0, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x0, 0x100)); + /* General ECC and Bus3 ECC MUX remains enabled */ + } + + return MV_OK; +} + +int ddr3_hws_hw_training(void) +{ + enum hws_algo_type algo_mode = ALGO_TYPE_DYNAMIC; + int status; + struct init_cntr_param init_param; + + status = ddr3_silicon_pre_init(); + if (MV_OK != status) { + printf("DDR3 Pre silicon Config - FAILED 0x%x\n", status); + return status; + } + + init_param.do_mrs_phy = 1; +#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X) + init_param.is_ctrl64_bit = 0; +#else + init_param.is_ctrl64_bit = 1; +#endif +#if defined(CONFIG_ALLEYCAT3) || defined(CONFIG_ARMADA_38X) || \ + defined(CONFIG_ARMADA_39X) + init_param.init_phy = 1; +#else + init_param.init_phy = 0; +#endif + init_param.msys_init = 1; + status = hws_ddr3_tip_init_controller(0, &init_param); + if (MV_OK != status) { + printf("DDR3 init controller - FAILED 0x%x\n", status); + return status; + } + + status = ddr3_silicon_post_init(); + if (MV_OK != status) { + printf("DDR3 Post Init - FAILED 0x%x\n", status); + return status; + } + + status = ddr3_pre_algo_config(); + if (MV_OK != status) { + printf("DDR3 Pre Algo Config - FAILED 0x%x\n", status); + return status; + } + + /* run algorithm in order to configure the PHY */ + status = hws_ddr3_tip_run_alg(0, algo_mode); + if (MV_OK != status) { + printf("DDR3 run algorithm - FAILED 0x%x\n", status); + return status; + } + + status = ddr3_post_algo_config(); + if (MV_OK != status) { + printf("DDR3 Post Algo Config - FAILED 0x%x\n", status); + return status; + } + + return MV_OK; +} diff --git a/drivers/ddr/marvell/a38x/ddr3_hws_hw_training.h b/drivers/ddr/marvell/a38x/ddr3_hws_hw_training.h new file mode 100644 index 0000000..17a0953 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_hws_hw_training.h @@ -0,0 +1,49 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_HWS_HW_TRAINING_H +#define _DDR3_HWS_HW_TRAINING_H + +/* struct used for DLB configuration array */ +struct dlb_config { + u32 reg_addr; + u32 reg_data; +}; + +/* Topology update structure */ +struct topology_update_info { + int update_ecc; + u8 ecc; + int update_width; + u8 width; + int update_ecc_pup3_mode; + u8 ecc_pup_mode_offset; +}; + +/* Topology update defines */ +#define TOPOLOGY_UPDATE_WIDTH_16BIT 1 +#define TOPOLOGY_UPDATE_WIDTH_32BIT 0 +#define TOPOLOGY_UPDATE_WIDTH_32BIT_MASK 0xf +#define TOPOLOGY_UPDATE_WIDTH_16BIT_MASK 0x3 + +#define TOPOLOGY_UPDATE_ECC_ON 1 +#define TOPOLOGY_UPDATE_ECC_OFF 0 +#define TOPOLOGY_UPDATE_ECC_OFFSET_PUP4 4 +#define TOPOLOGY_UPDATE_ECC_OFFSET_PUP3 3 + +/* + * 1. L2 filter should be set at binary header to 0xd000000, + * to avoid conflict with internal register IO. + * 2. U-Boot modifies internal registers base to 0xf100000, + * and than should update L2 filter accordingly to 0xf000000 (3.75 GB) + */ +/* temporary limit l2 filter to 3GiB (LSP issue) */ +#define L2_FILTER_FOR_MAX_MEMORY_SIZE 0xc0000000 +#define ADDRESS_FILTERING_END_REGISTER 0x8c04 + +#define SUB_VERSION 0 + +#endif /* _DDR3_HWS_HW_TRAINING_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_hws_hw_training_def.h b/drivers/ddr/marvell/a38x/ddr3_hws_hw_training_def.h new file mode 100644 index 0000000..7500a72 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_hws_hw_training_def.h @@ -0,0 +1,467 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_HWS_HW_TRAINING_DEF_H +#define _DDR3_HWS_HW_TRAINING_DEF_H + +#define SAR_DDR3_FREQ_MASK 0xfe00000 +#define SAR_CPU_FAB_GET(cpu, fab) (((cpu & 0x7) << 21) | \ + ((fab & 0xf) << 24)) + +#define MAX_CS 4 + +#define MIN_DIMM_ADDR 0x50 +#define FAR_END_DIMM_ADDR 0x50 +#define MAX_DIMM_ADDR 0x60 + +#define SDRAM_CS_SIZE 0xfffffff +#define SDRAM_CS_BASE 0x0 +#define SDRAM_DIMM_SIZE 0x80000000 + +#define CPU_CONFIGURATION_REG(id) (0x21800 + (id * 0x100)) +#define CPU_MRVL_ID_OFFSET 0x10 +#define SAR1_CPU_CORE_MASK 0x00000018 +#define SAR1_CPU_CORE_OFFSET 3 + +#define NEW_FABRIC_TWSI_ADDR 0x4e +#ifdef DB_784MP_GP +#define BUS_WIDTH_ECC_TWSI_ADDR 0x4e +#else +#define BUS_WIDTH_ECC_TWSI_ADDR 0x4f +#endif +#define MV_MAX_DDR3_STATIC_SIZE 50 +#define MV_DDR3_MODES_NUMBER 30 + +#define RESUME_RL_PATTERNS_ADDR 0xfe0000 +#define RESUME_RL_PATTERNS_SIZE 0x100 +#define RESUME_TRAINING_VALUES_ADDR (RESUME_RL_PATTERNS_ADDR + \ + RESUME_RL_PATTERNS_SIZE) +#define RESUME_TRAINING_VALUES_MAX 0xcd0 +#define BOOT_INFO_ADDR (RESUME_RL_PATTERNS_ADDR + 0x1000) +#define CHECKSUM_RESULT_ADDR (BOOT_INFO_ADDR + 0x1000) +#define NUM_OF_REGISTER_ADDR (CHECKSUM_RESULT_ADDR + 4) +#define SUSPEND_MAGIC_WORD 0xdeadb002 +#define REGISTER_LIST_END 0xffffffff + +/* MISC */ +#define INTER_REGS_BASE SOC_REGS_PHY_BASE + +/* DDR */ +#define REG_SDRAM_CONFIG_ADDR 0x1400 +#define REG_SDRAM_CONFIG_MASK 0x9fffffff +#define REG_SDRAM_CONFIG_RFRS_MASK 0x3fff +#define REG_SDRAM_CONFIG_WIDTH_OFFS 15 +#define REG_SDRAM_CONFIG_REGDIMM_OFFS 17 +#define REG_SDRAM_CONFIG_ECC_OFFS 18 +#define REG_SDRAM_CONFIG_IERR_OFFS 19 +#define REG_SDRAM_CONFIG_PUPRSTDIV_OFFS 28 +#define REG_SDRAM_CONFIG_RSTRD_OFFS 30 + +#define REG_SDRAM_PINS_MUX 0x19d4 + +#define REG_DUNIT_CTRL_LOW_ADDR 0x1404 +#define REG_DUNIT_CTRL_LOW_2T_OFFS 3 +#define REG_DUNIT_CTRL_LOW_2T_MASK 0x3 +#define REG_DUNIT_CTRL_LOW_DPDE_OFFS 14 + +#define REG_SDRAM_TIMING_LOW_ADDR 0x1408 +#define REG_SDRAM_TIMING_HIGH_ADDR 0x140c +#define REG_SDRAM_TIMING_H_R2R_OFFS 7 +#define REG_SDRAM_TIMING_H_R2R_MASK 0x3 +#define REG_SDRAM_TIMING_H_R2W_W2R_OFFS 9 +#define REG_SDRAM_TIMING_H_R2W_W2R_MASK 0x3 +#define REG_SDRAM_TIMING_H_W2W_OFFS 11 +#define REG_SDRAM_TIMING_H_W2W_MASK 0x1f +#define REG_SDRAM_TIMING_H_R2R_H_OFFS 19 +#define REG_SDRAM_TIMING_H_R2R_H_MASK 0x7 +#define REG_SDRAM_TIMING_H_R2W_W2R_H_OFFS 22 +#define REG_SDRAM_TIMING_H_R2W_W2R_H_MASK 0x7 + +#define REG_SDRAM_ADDRESS_CTRL_ADDR 0x1410 +#define REG_SDRAM_ADDRESS_SIZE_OFFS 2 +#define REG_SDRAM_ADDRESS_SIZE_HIGH_OFFS 18 +#define REG_SDRAM_ADDRESS_CTRL_STRUCT_OFFS 4 + +#define REG_SDRAM_OPEN_PAGES_ADDR 0x1414 +#define REG_SDRAM_OPERATION_CS_OFFS 8 + +#define REG_SDRAM_OPERATION_ADDR 0x1418 +#define REG_SDRAM_OPERATION_CWA_DELAY_SEL_OFFS 24 +#define REG_SDRAM_OPERATION_CWA_DATA_OFFS 20 +#define REG_SDRAM_OPERATION_CWA_DATA_MASK 0xf +#define REG_SDRAM_OPERATION_CWA_RC_OFFS 16 +#define REG_SDRAM_OPERATION_CWA_RC_MASK 0xf +#define REG_SDRAM_OPERATION_CMD_MR0 0xf03 +#define REG_SDRAM_OPERATION_CMD_MR1 0xf04 +#define REG_SDRAM_OPERATION_CMD_MR2 0xf08 +#define REG_SDRAM_OPERATION_CMD_MR3 0xf09 +#define REG_SDRAM_OPERATION_CMD_RFRS 0xf02 +#define REG_SDRAM_OPERATION_CMD_CWA 0xf0e +#define REG_SDRAM_OPERATION_CMD_RFRS_DONE 0xf +#define REG_SDRAM_OPERATION_CMD_MASK 0xf +#define REG_SDRAM_OPERATION_CS_OFFS 8 + +#define REG_OUDDR3_TIMING_ADDR 0x142c + +#define REG_SDRAM_MODE_ADDR 0x141c + +#define REG_SDRAM_EXT_MODE_ADDR 0x1420 + +#define REG_DDR_CONT_HIGH_ADDR 0x1424 + +#define REG_ODT_TIME_LOW_ADDR 0x1428 +#define REG_ODT_ON_CTL_RD_OFFS 12 +#define REG_ODT_OFF_CTL_RD_OFFS 16 +#define REG_SDRAM_ERROR_ADDR 0x1454 +#define REG_SDRAM_AUTO_PWR_SAVE_ADDR 0x1474 +#define REG_ODT_TIME_HIGH_ADDR 0x147c + +#define REG_SDRAM_INIT_CTRL_ADDR 0x1480 +#define REG_SDRAM_INIT_CTRL_OFFS 0 +#define REG_SDRAM_INIT_CKE_ASSERT_OFFS 2 +#define REG_SDRAM_INIT_RESET_DEASSERT_OFFS 3 +#define REG_SDRAM_INIT_RESET_MASK_OFFS 1 + +#define REG_SDRAM_ODT_CTRL_LOW_ADDR 0x1494 + +#define REG_SDRAM_ODT_CTRL_HIGH_ADDR 0x1498 +#define REG_SDRAM_ODT_CTRL_HIGH_OVRD_MASK 0x0 +#define REG_SDRAM_ODT_CTRL_HIGH_OVRD_ENA 0x3 + +#define REG_DUNIT_ODT_CTRL_ADDR 0x149c +#define REG_DUNIT_ODT_CTRL_OVRD_OFFS 8 +#define REG_DUNIT_ODT_CTRL_OVRD_VAL_OFFS 9 + +#define REG_DRAM_FIFO_CTRL_ADDR 0x14a0 + +#define REG_DRAM_AXI_CTRL_ADDR 0x14a8 +#define REG_DRAM_AXI_CTRL_AXIDATABUSWIDTH_OFFS 0 + +#define REG_METAL_MASK_ADDR 0x14b0 +#define REG_METAL_MASK_MASK 0xdfffffff +#define REG_METAL_MASK_RETRY_OFFS 0 + +#define REG_DRAM_ADDR_CTRL_DRIVE_STRENGTH_ADDR 0x14c0 + +#define REG_DRAM_DATA_DQS_DRIVE_STRENGTH_ADDR 0x14c4 +#define REG_DRAM_VER_CAL_MACHINE_CTRL_ADDR 0x14c8 +#define REG_DRAM_MAIN_PADS_CAL_ADDR 0x14cc + +#define REG_DRAM_HOR_CAL_MACHINE_CTRL_ADDR 0x17c8 + +#define REG_CS_SIZE_SCRATCH_ADDR 0x1504 +#define REG_DYNAMIC_POWER_SAVE_ADDR 0x1520 +#define REG_DDR_IO_ADDR 0x1524 +#define REG_DDR_IO_CLK_RATIO_OFFS 15 + +#define REG_DFS_ADDR 0x1528 +#define REG_DFS_DLLNEXTSTATE_OFFS 0 +#define REG_DFS_BLOCK_OFFS 1 +#define REG_DFS_SR_OFFS 2 +#define REG_DFS_ATSR_OFFS 3 +#define REG_DFS_RECONF_OFFS 4 +#define REG_DFS_CL_NEXT_STATE_OFFS 8 +#define REG_DFS_CL_NEXT_STATE_MASK 0xf +#define REG_DFS_CWL_NEXT_STATE_OFFS 12 +#define REG_DFS_CWL_NEXT_STATE_MASK 0x7 + +#define REG_READ_DATA_SAMPLE_DELAYS_ADDR 0x1538 +#define REG_READ_DATA_SAMPLE_DELAYS_MASK 0x1f +#define REG_READ_DATA_SAMPLE_DELAYS_OFFS 8 + +#define REG_READ_DATA_READY_DELAYS_ADDR 0x153c +#define REG_READ_DATA_READY_DELAYS_MASK 0x1f +#define REG_READ_DATA_READY_DELAYS_OFFS 8 + +#define START_BURST_IN_ADDR 1 + +#define REG_DRAM_TRAINING_SHADOW_ADDR 0x18488 +#define REG_DRAM_TRAINING_ADDR 0x15b0 +#define REG_DRAM_TRAINING_LOW_FREQ_OFFS 0 +#define REG_DRAM_TRAINING_PATTERNS_OFFS 4 +#define REG_DRAM_TRAINING_MED_FREQ_OFFS 2 +#define REG_DRAM_TRAINING_WL_OFFS 3 +#define REG_DRAM_TRAINING_RL_OFFS 6 +#define REG_DRAM_TRAINING_DQS_RX_OFFS 15 +#define REG_DRAM_TRAINING_DQS_TX_OFFS 16 +#define REG_DRAM_TRAINING_CS_OFFS 20 +#define REG_DRAM_TRAINING_RETEST_OFFS 24 +#define REG_DRAM_TRAINING_DFS_FREQ_OFFS 27 +#define REG_DRAM_TRAINING_DFS_REQ_OFFS 29 +#define REG_DRAM_TRAINING_ERROR_OFFS 30 +#define REG_DRAM_TRAINING_AUTO_OFFS 31 +#define REG_DRAM_TRAINING_RETEST_PAR 0x3 +#define REG_DRAM_TRAINING_RETEST_MASK 0xf8ffffff +#define REG_DRAM_TRAINING_CS_MASK 0xff0fffff +#define REG_DRAM_TRAINING_PATTERNS_MASK 0xff0f0000 + +#define REG_DRAM_TRAINING_1_ADDR 0x15b4 +#define REG_DRAM_TRAINING_1_TRNBPOINT_OFFS 16 + +#define REG_DRAM_TRAINING_2_ADDR 0x15b8 +#define REG_DRAM_TRAINING_2_OVERRUN_OFFS 17 +#define REG_DRAM_TRAINING_2_FIFO_RST_OFFS 4 +#define REG_DRAM_TRAINING_2_RL_MODE_OFFS 3 +#define REG_DRAM_TRAINING_2_WL_MODE_OFFS 2 +#define REG_DRAM_TRAINING_2_ECC_MUX_OFFS 1 +#define REG_DRAM_TRAINING_2_SW_OVRD_OFFS 0 + +#define REG_DRAM_TRAINING_PATTERN_BASE_ADDR 0x15bc +#define REG_DRAM_TRAINING_PATTERN_BASE_OFFS 3 + +#define REG_TRAINING_DEBUG_2_ADDR 0x15c4 +#define REG_TRAINING_DEBUG_2_OFFS 16 +#define REG_TRAINING_DEBUG_2_MASK 0x3 + +#define REG_TRAINING_DEBUG_3_ADDR 0x15c8 +#define REG_TRAINING_DEBUG_3_OFFS 3 +#define REG_TRAINING_DEBUG_3_MASK 0x7 + +#define MR_CS_ADDR_OFFS 4 + +#define REG_DDR3_MR0_ADDR 0x15d0 +#define REG_DDR3_MR0_CS_ADDR 0x1870 +#define REG_DDR3_MR0_CL_MASK 0x74 +#define REG_DDR3_MR0_CL_OFFS 2 +#define REG_DDR3_MR0_CL_HIGH_OFFS 3 +#define CL_MASK 0xf + +#define REG_DDR3_MR1_ADDR 0x15d4 +#define REG_DDR3_MR1_CS_ADDR 0x1874 +#define REG_DDR3_MR1_RTT_MASK 0xfffffdbb +#define REG_DDR3_MR1_DLL_ENA_OFFS 0 +#define REG_DDR3_MR1_RTT_DISABLED 0x0 +#define REG_DDR3_MR1_RTT_RZQ2 0x40 +#define REG_DDR3_MR1_RTT_RZQ4 0x2 +#define REG_DDR3_MR1_RTT_RZQ6 0x42 +#define REG_DDR3_MR1_RTT_RZQ8 0x202 +#define REG_DDR3_MR1_RTT_RZQ12 0x4 +/* WL-disabled, OB-enabled */ +#define REG_DDR3_MR1_OUTBUF_WL_MASK 0xffffef7f +/* Output Buffer Disabled */ +#define REG_DDR3_MR1_OUTBUF_DIS_OFFS 12 +#define REG_DDR3_MR1_WL_ENA_OFFS 7 +#define REG_DDR3_MR1_WL_ENA 0x80 /* WL Enabled */ +#define REG_DDR3_MR1_ODT_MASK 0xfffffdbb + +#define REG_DDR3_MR2_ADDR 0x15d8 +#define REG_DDR3_MR2_CS_ADDR 0x1878 +#define REG_DDR3_MR2_CWL_OFFS 3 +#define REG_DDR3_MR2_CWL_MASK 0x7 +#define REG_DDR3_MR2_ODT_MASK 0xfffff9ff +#define REG_DDR3_MR3_ADDR 0x15dc +#define REG_DDR3_MR3_CS_ADDR 0x187c + +#define REG_DDR3_RANK_CTRL_ADDR 0x15e0 +#define REG_DDR3_RANK_CTRL_CS_ENA_MASK 0xf +#define REG_DDR3_RANK_CTRL_MIRROR_OFFS 4 + +#define REG_ZQC_CONF_ADDR 0x15e4 + +#define REG_DRAM_PHY_CONFIG_ADDR 0x15ec +#define REG_DRAM_PHY_CONFIG_MASK 0x3fffffff + +#define REG_ODPG_CNTRL_ADDR 0x1600 +#define REG_ODPG_CNTRL_OFFS 21 + +#define REG_PHY_LOCK_MASK_ADDR 0x1670 +#define REG_PHY_LOCK_MASK_MASK 0xfffff000 + +#define REG_PHY_LOCK_STATUS_ADDR 0x1674 +#define REG_PHY_LOCK_STATUS_LOCK_OFFS 9 +#define REG_PHY_LOCK_STATUS_LOCK_MASK 0xfff +#define REG_PHY_LOCK_APLL_ADLL_STATUS_MASK 0x7ff + +#define REG_PHY_REGISTRY_FILE_ACCESS_ADDR 0x16a0 +#define REG_PHY_REGISTRY_FILE_ACCESS_OP_WR 0xc0000000 +#define REG_PHY_REGISTRY_FILE_ACCESS_OP_RD 0x80000000 +#define REG_PHY_REGISTRY_FILE_ACCESS_OP_DONE 0x80000000 +#define REG_PHY_BC_OFFS 27 +#define REG_PHY_CNTRL_OFFS 26 +#define REG_PHY_CS_OFFS 16 +#define REG_PHY_DQS_REF_DLY_OFFS 10 +#define REG_PHY_PHASE_OFFS 8 +#define REG_PHY_PUP_OFFS 22 + +#define REG_TRAINING_WL_ADDR 0x16ac +#define REG_TRAINING_WL_CS_MASK 0xfffffffc +#define REG_TRAINING_WL_UPD_OFFS 2 +#define REG_TRAINING_WL_CS_DONE_OFFS 3 +#define REG_TRAINING_WL_RATIO_MASK 0xffffff0f +#define REG_TRAINING_WL_1TO1 0x50 +#define REG_TRAINING_WL_2TO1 0x10 +#define REG_TRAINING_WL_DELAYEXP_MASK 0x20000000 +#define REG_TRAINING_WL_RESULTS_MASK 0x000001ff +#define REG_TRAINING_WL_RESULTS_OFFS 20 + +#define REG_REGISTERED_DRAM_CTRL_ADDR 0x16d0 +#define REG_REGISTERED_DRAM_CTRL_SR_FLOAT_OFFS 15 +#define REG_REGISTERED_DRAM_CTRL_PARITY_MASK 0x3f + +/* DLB */ +#define REG_STATIC_DRAM_DLB_CONTROL 0x1700 +#define DLB_BUS_OPTIMIZATION_WEIGHTS_REG 0x1704 +#define DLB_AGING_REGISTER 0x1708 +#define DLB_EVICTION_CONTROL_REG 0x170c +#define DLB_EVICTION_TIMERS_REGISTER_REG 0x1710 +#define DLB_USER_COMMAND_REG 0x1714 +#define DLB_BUS_WEIGHTS_DIFF_CS 0x1770 +#define DLB_BUS_WEIGHTS_DIFF_BG 0x1774 +#define DLB_BUS_WEIGHTS_SAME_BG 0x1778 +#define DLB_BUS_WEIGHTS_RD_WR 0x177c +#define DLB_BUS_WEIGHTS_ATTR_SYS_PRIO 0x1780 +#define DLB_MAIN_QUEUE_MAP 0x1784 +#define DLB_LINE_SPLIT 0x1788 + +#define DLB_ENABLE 0x1 +#define DLB_WRITE_COALESING (0x1 << 2) +#define DLB_AXI_PREFETCH_EN (0x1 << 3) +#define DLB_MBUS_PREFETCH_EN (0x1 << 4) +#define PREFETCH_N_LN_SZ_TR (0x1 << 6) +#define DLB_INTERJECTION_ENABLE (0x1 << 3) + +/* CPU */ +#define REG_BOOTROM_ROUTINE_ADDR 0x182d0 +#define REG_BOOTROM_ROUTINE_DRAM_INIT_OFFS 12 + +#define REG_DRAM_INIT_CTRL_STATUS_ADDR 0x18488 +#define REG_DRAM_INIT_CTRL_TRN_CLK_OFFS 16 +#define REG_CPU_DIV_CLK_CTRL_0_NEW_RATIO 0x000200ff +#define REG_DRAM_INIT_CTRL_STATUS_2_ADDR 0x1488 + +#define REG_CPU_DIV_CLK_CTRL_0_ADDR 0x18700 + +#define REG_CPU_DIV_CLK_CTRL_1_ADDR 0x18704 +#define REG_CPU_DIV_CLK_CTRL_2_ADDR 0x18708 + +#define REG_CPU_DIV_CLK_CTRL_3_ADDR 0x1870c +#define REG_CPU_DIV_CLK_CTRL_3_FREQ_MASK 0xffffc0ff +#define REG_CPU_DIV_CLK_CTRL_3_FREQ_OFFS 8 + +#define REG_CPU_DIV_CLK_CTRL_4_ADDR 0x18710 + +#define REG_CPU_DIV_CLK_STATUS_0_ADDR 0x18718 +#define REG_CPU_DIV_CLK_ALL_STABLE_OFFS 8 + +#define REG_CPU_PLL_CTRL_0_ADDR 0x1871c +#define REG_CPU_PLL_STATUS_0_ADDR 0x18724 +#define REG_CORE_DIV_CLK_CTRL_ADDR 0x18740 +#define REG_CORE_DIV_CLK_STATUS_ADDR 0x18744 +#define REG_DDRPHY_APLL_CTRL_ADDR 0x18780 + +#define REG_DDRPHY_APLL_CTRL_2_ADDR 0x18784 +#define REG_SFABRIC_CLK_CTRL_ADDR 0x20858 +#define REG_SFABRIC_CLK_CTRL_SMPL_OFFS 8 + +/* DRAM Windows */ +#define REG_XBAR_WIN_19_CTRL_ADDR 0x200e8 +#define REG_XBAR_WIN_4_CTRL_ADDR 0x20040 +#define REG_XBAR_WIN_4_BASE_ADDR 0x20044 +#define REG_XBAR_WIN_4_REMAP_ADDR 0x20048 +#define REG_FASTPATH_WIN_0_CTRL_ADDR 0x20184 +#define REG_XBAR_WIN_7_REMAP_ADDR 0x20078 + +/* SRAM */ +#define REG_CDI_CONFIG_ADDR 0x20220 +#define REG_SRAM_WINDOW_0_ADDR 0x20240 +#define REG_SRAM_WINDOW_0_ENA_OFFS 0 +#define REG_SRAM_WINDOW_1_ADDR 0x20244 +#define REG_SRAM_L2_ENA_ADDR 0x8500 +#define REG_SRAM_CLEAN_BY_WAY_ADDR 0x87bc + +/* Timers */ +#define REG_TIMERS_CTRL_ADDR 0x20300 +#define REG_TIMERS_EVENTS_ADDR 0x20304 +#define REG_TIMER0_VALUE_ADDR 0x20314 +#define REG_TIMER1_VALUE_ADDR 0x2031c +#define REG_TIMER0_ENABLE_MASK 0x1 + +#define MV_BOARD_REFCLK_25MHZ 25000000 +#define CNTMR_RELOAD_REG(tmr) (REG_TIMERS_CTRL_ADDR + 0x10 + (tmr * 8)) +#define CNTMR_VAL_REG(tmr) (REG_TIMERS_CTRL_ADDR + 0x14 + (tmr * 8)) +#define CNTMR_CTRL_REG(tmr) (REG_TIMERS_CTRL_ADDR) +#define CTCR_ARM_TIMER_EN_OFFS(timer) (timer * 2) +#define CTCR_ARM_TIMER_EN_MASK(timer) (1 << CTCR_ARM_TIMER_EN_OFFS(timer)) +#define CTCR_ARM_TIMER_EN(timer) (1 << CTCR_ARM_TIMER_EN_OFFS(timer)) + +#define CTCR_ARM_TIMER_AUTO_OFFS(timer) (1 + (timer * 2)) +#define CTCR_ARM_TIMER_AUTO_MASK(timer) (1 << CTCR_ARM_TIMER_EN_OFFS(timer)) +#define CTCR_ARM_TIMER_AUTO_EN(timer) (1 << CTCR_ARM_TIMER_AUTO_OFFS(timer)) + +/* PMU */ +#define REG_PMU_I_F_CTRL_ADDR 0x1c090 +#define REG_PMU_DUNIT_BLK_OFFS 16 +#define REG_PMU_DUNIT_RFRS_OFFS 20 +#define REG_PMU_DUNIT_ACK_OFFS 24 + +/* MBUS */ +#define MBUS_UNITS_PRIORITY_CONTROL_REG (MBUS_REGS_OFFSET + 0x420) +#define FABRIC_UNITS_PRIORITY_CONTROL_REG (MBUS_REGS_OFFSET + 0x424) +#define MBUS_UNITS_PREFETCH_CONTROL_REG (MBUS_REGS_OFFSET + 0x428) +#define FABRIC_UNITS_PREFETCH_CONTROL_REG (MBUS_REGS_OFFSET + 0x42c) + +#define REG_PM_STAT_MASK_ADDR 0x2210c +#define REG_PM_STAT_MASK_CPU0_IDLE_MASK_OFFS 16 + +#define REG_PM_EVENT_STAT_MASK_ADDR 0x22120 +#define REG_PM_EVENT_STAT_MASK_DFS_DONE_OFFS 17 + +#define REG_PM_CTRL_CONFIG_ADDR 0x22104 +#define REG_PM_CTRL_CONFIG_DFS_REQ_OFFS 18 + +#define REG_FABRIC_LOCAL_IRQ_MASK_ADDR 0x218c4 +#define REG_FABRIC_LOCAL_IRQ_PMU_MASK_OFFS 18 + +/* Controller revision info */ +#define PCI_CLASS_CODE_AND_REVISION_ID 0x008 +#define PCCRIR_REVID_OFFS 0 /* Revision ID */ +#define PCCRIR_REVID_MASK (0xff << PCCRIR_REVID_OFFS) + +/* Power Management Clock Gating Control Register */ +#define POWER_MNG_CTRL_REG 0x18220 +#define PEX_DEVICE_AND_VENDOR_ID 0x000 +#define PEX_CFG_DIRECT_ACCESS(if, reg) (PEX_IF_REGS_BASE(if) + (reg)) +#define PMC_PEXSTOPCLOCK_OFFS(p) ((p) < 8 ? (5 + (p)) : (18 + (p))) +#define PMC_PEXSTOPCLOCK_MASK(p) (1 << PMC_PEXSTOPCLOCK_OFFS(p)) +#define PMC_PEXSTOPCLOCK_EN(p) (1 << PMC_PEXSTOPCLOCK_OFFS(p)) +#define PMC_PEXSTOPCLOCK_STOP(p) (0 << PMC_PEXSTOPCLOCK_OFFS(p)) + +/* TWSI */ +#define TWSI_DATA_ADDR_MASK 0x7 +#define TWSI_DATA_ADDR_OFFS 1 + +/* General */ +#define MAX_CS 4 + +/* Frequencies */ +#define FAB_OPT 21 +#define CLK_CPU 12 +#define CLK_VCO (2 * CLK_CPU) +#define CLK_DDR 12 + +/* CPU Frequencies: */ +#define CLK_CPU_1000 0 +#define CLK_CPU_1066 1 +#define CLK_CPU_1200 2 +#define CLK_CPU_1333 3 +#define CLK_CPU_1500 4 +#define CLK_CPU_1666 5 +#define CLK_CPU_1800 6 +#define CLK_CPU_2000 7 +#define CLK_CPU_600 8 +#define CLK_CPU_667 9 +#define CLK_CPU_800 0xa + +/* Extra Cpu Frequencies: */ +#define CLK_CPU_1600 11 +#define CLK_CPU_2133 12 +#define CLK_CPU_2200 13 +#define CLK_CPU_2400 14 + +#define SAR1_CPU_CORE_MASK 0x00000018 +#define SAR1_CPU_CORE_OFFSET 3 + +#endif /* _DDR3_HWS_HW_TRAINING_DEF_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_hws_sil_training.h b/drivers/ddr/marvell/a38x/ddr3_hws_sil_training.h new file mode 100644 index 0000000..544237a --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_hws_sil_training.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_HWS_SIL_TRAINING_H +#define _DDR3_HWS_SIL_TRAINING_H + +#include "ddr3_training_ip.h" +#include "ddr3_training_ip_prv_if.h" + +int ddr3_silicon_pre_config(void); +int ddr3_silicon_init(void); +int ddr3_silicon_get_ddr_target_freq(u32 *ddr_freq); + +#endif /* _DDR3_HWS_SIL_TRAINING_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_init.c b/drivers/ddr/marvell/a38x/ddr3_init.c new file mode 100644 index 0000000..d6ed8e0 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_init.c @@ -0,0 +1,852 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +#include "../../../../arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h" + +static struct dlb_config ddr3_dlb_config_table[] = { + {REG_STATIC_DRAM_DLB_CONTROL, 0x2000005c}, + {DLB_BUS_OPTIMIZATION_WEIGHTS_REG, 0x00880000}, + {DLB_AGING_REGISTER, 0x0f7f007f}, + {DLB_EVICTION_CONTROL_REG, 0x0000129f}, + {DLB_EVICTION_TIMERS_REGISTER_REG, 0x00ff0000}, + {DLB_BUS_WEIGHTS_DIFF_CS, 0x04030802}, + {DLB_BUS_WEIGHTS_DIFF_BG, 0x00000a02}, + {DLB_BUS_WEIGHTS_SAME_BG, 0x09000a01}, + {DLB_BUS_WEIGHTS_RD_WR, 0x00020005}, + {DLB_BUS_WEIGHTS_ATTR_SYS_PRIO, 0x00060f10}, + {DLB_MAIN_QUEUE_MAP, 0x00000543}, + {DLB_LINE_SPLIT, 0x00000000}, + {DLB_USER_COMMAND_REG, 0x00000000}, + {0x0, 0x0} +}; + +static struct dlb_config ddr3_dlb_config_table_a0[] = { + {REG_STATIC_DRAM_DLB_CONTROL, 0x2000005c}, + {DLB_BUS_OPTIMIZATION_WEIGHTS_REG, 0x00880000}, + {DLB_AGING_REGISTER, 0x0f7f007f}, + {DLB_EVICTION_CONTROL_REG, 0x0000129f}, + {DLB_EVICTION_TIMERS_REGISTER_REG, 0x00ff0000}, + {DLB_BUS_WEIGHTS_DIFF_CS, 0x04030802}, + {DLB_BUS_WEIGHTS_DIFF_BG, 0x00000a02}, + {DLB_BUS_WEIGHTS_SAME_BG, 0x09000a01}, + {DLB_BUS_WEIGHTS_RD_WR, 0x00020005}, + {DLB_BUS_WEIGHTS_ATTR_SYS_PRIO, 0x00060f10}, + {DLB_MAIN_QUEUE_MAP, 0x00000543}, + {DLB_LINE_SPLIT, 0x00000000}, + {DLB_USER_COMMAND_REG, 0x00000000}, + {0x0, 0x0} +}; + +#if defined(CONFIG_ARMADA_38X) +struct dram_modes { + char *mode_name; + u8 cpu_freq; + u8 fab_freq; + u8 chip_id; + u8 chip_board_rev; + struct reg_data *regs; +}; + +struct dram_modes ddr_modes[] = { +#ifdef SUPPORT_STATIC_DUNIT_CONFIG + /* Conf name, CPUFreq, Fab_freq, Chip ID, Chip/Board, MC regs*/ +#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT + {"a38x_customer_0_800", DDR_FREQ_800, 0, 0x0, A38X_CUSTOMER_BOARD_ID0, + ddr3_customer_800}, + {"a38x_customer_1_800", DDR_FREQ_800, 0, 0x0, A38X_CUSTOMER_BOARD_ID1, + ddr3_customer_800}, +#else + {"a38x_533", DDR_FREQ_533, 0, 0x0, MARVELL_BOARD, ddr3_a38x_533}, + {"a38x_667", DDR_FREQ_667, 0, 0x0, MARVELL_BOARD, ddr3_a38x_667}, + {"a38x_800", DDR_FREQ_800, 0, 0x0, MARVELL_BOARD, ddr3_a38x_800}, + {"a38x_933", DDR_FREQ_933, 0, 0x0, MARVELL_BOARD, ddr3_a38x_933}, +#endif +#endif +}; +#endif /* defined(CONFIG_ARMADA_38X) */ + +/* Translates topology map definitions to real memory size in bits */ +u32 mem_size[] = { + ADDR_SIZE_512MB, ADDR_SIZE_1GB, ADDR_SIZE_2GB, ADDR_SIZE_4GB, + ADDR_SIZE_8GB +}; + +static char *ddr_type = "DDR3"; + +/* + * Set 1 to use dynamic DUNIT configuration, + * set 0 (supported for A380 and AC3) to configure DUNIT in values set by + * ddr3_tip_init_specific_reg_config + */ +u8 generic_init_controller = 1; + +#ifdef SUPPORT_STATIC_DUNIT_CONFIG +static u32 ddr3_get_static_ddr_mode(void); +#endif +static int ddr3_hws_tune_training_params(u8 dev_num); +static int ddr3_update_topology_map(struct hws_topology_map *topology_map); + +/* device revision */ +#define DEV_VERSION_ID_REG 0x1823c +#define REVISON_ID_OFFS 8 +#define REVISON_ID_MASK 0xf00 + +/* A38x revisions */ +#define MV_88F68XX_Z1_ID 0x0 +#define MV_88F68XX_A0_ID 0x4 +/* A39x revisions */ +#define MV_88F69XX_Z1_ID 0x2 + +/* + * sys_env_device_rev_get - Get Marvell controller device revision number + * + * DESCRIPTION: + * This function returns 8bit describing the device revision as defined + * Revision ID Register. + * + * INPUT: + * None. + * + * OUTPUT: + * None. + * + * RETURN: + * 8bit desscribing Marvell controller revision number + */ +u8 sys_env_device_rev_get(void) +{ + u32 value; + + value = reg_read(DEV_VERSION_ID_REG); + return (value & (REVISON_ID_MASK)) >> REVISON_ID_OFFS; +} + +/* + * sys_env_dlb_config_ptr_get + * + * DESCRIPTION: defines pointer to to DLB COnfiguration table + * + * INPUT: none + * + * OUTPUT: pointer to DLB COnfiguration table + * + * RETURN: + * returns pointer to DLB COnfiguration table + */ +struct dlb_config *sys_env_dlb_config_ptr_get(void) +{ +#ifdef CONFIG_ARMADA_39X + return &ddr3_dlb_config_table_a0[0]; +#else + if (sys_env_device_rev_get() == MV_88F68XX_A0_ID) + return &ddr3_dlb_config_table_a0[0]; + else + return &ddr3_dlb_config_table[0]; +#endif +} + +/* + * sys_env_get_cs_ena_from_reg + * + * DESCRIPTION: Get bit mask of enabled CS + * + * INPUT: None + * + * OUTPUT: None + * + * RETURN: + * Bit mask of enabled CS, 1 if only CS0 enabled, + * 3 if both CS0 and CS1 enabled + */ +u32 sys_env_get_cs_ena_from_reg(void) +{ + return reg_read(REG_DDR3_RANK_CTRL_ADDR) & + REG_DDR3_RANK_CTRL_CS_ENA_MASK; +} + +static void ddr3_restore_and_set_final_windows(u32 *win) +{ + u32 win_ctrl_reg, num_of_win_regs; + u32 cs_ena = sys_env_get_cs_ena_from_reg(); + u32 ui; + + win_ctrl_reg = REG_XBAR_WIN_4_CTRL_ADDR; + num_of_win_regs = 16; + + /* Return XBAR windows 4-7 or 16-19 init configuration */ + for (ui = 0; ui < num_of_win_regs; ui++) + reg_write((win_ctrl_reg + 0x4 * ui), win[ui]); + + printf("%s Training Sequence - Switching XBAR Window to FastPath Window\n", + ddr_type); + +#if defined DYNAMIC_CS_SIZE_CONFIG + if (ddr3_fast_path_dynamic_cs_size_config(cs_ena) != MV_OK) + printf("ddr3_fast_path_dynamic_cs_size_config FAILED\n"); +#else + u32 reg, cs; + reg = 0x1fffffe1; + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) { + reg |= (cs << 2); + break; + } + } + /* Open fast path Window to - 0.5G */ + reg_write(REG_FASTPATH_WIN_0_CTRL_ADDR, reg); +#endif +} + +static int ddr3_save_and_set_training_windows(u32 *win) +{ + u32 cs_ena; + u32 reg, tmp_count, cs, ui; + u32 win_ctrl_reg, win_base_reg, win_remap_reg; + u32 num_of_win_regs, win_jump_index; + win_ctrl_reg = REG_XBAR_WIN_4_CTRL_ADDR; + win_base_reg = REG_XBAR_WIN_4_BASE_ADDR; + win_remap_reg = REG_XBAR_WIN_4_REMAP_ADDR; + win_jump_index = 0x10; + num_of_win_regs = 16; + struct hws_topology_map *tm = ddr3_get_topology_map(); + +#ifdef DISABLE_L2_FILTERING_DURING_DDR_TRAINING + /* + * Disable L2 filtering during DDR training + * (when Cross Bar window is open) + */ + reg_write(ADDRESS_FILTERING_END_REGISTER, 0); +#endif + + cs_ena = tm->interface_params[0].as_bus_params[0].cs_bitmask; + + /* Close XBAR Window 19 - Not needed */ + /* {0x000200e8} - Open Mbus Window - 2G */ + reg_write(REG_XBAR_WIN_19_CTRL_ADDR, 0); + + /* Save XBAR Windows 4-19 init configurations */ + for (ui = 0; ui < num_of_win_regs; ui++) + win[ui] = reg_read(win_ctrl_reg + 0x4 * ui); + + /* Open XBAR Windows 4-7 or 16-19 for other CS */ + reg = 0; + tmp_count = 0; + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) { + switch (cs) { + case 0: + reg = 0x0e00; + break; + case 1: + reg = 0x0d00; + break; + case 2: + reg = 0x0b00; + break; + case 3: + reg = 0x0700; + break; + } + reg |= (1 << 0); + reg |= (SDRAM_CS_SIZE & 0xffff0000); + + reg_write(win_ctrl_reg + win_jump_index * tmp_count, + reg); + reg = (((SDRAM_CS_SIZE + 1) * (tmp_count)) & + 0xffff0000); + reg_write(win_base_reg + win_jump_index * tmp_count, + reg); + + if (win_remap_reg <= REG_XBAR_WIN_7_REMAP_ADDR) + reg_write(win_remap_reg + + win_jump_index * tmp_count, 0); + + tmp_count++; + } + } + + return MV_OK; +} + +/* + * Name: ddr3_init - Main DDR3 Init function + * Desc: This routine initialize the DDR3 MC and runs HW training. + * Args: None. + * Notes: + * Returns: None. + */ +int ddr3_init(void) +{ + u32 reg = 0; + u32 soc_num; + int status; + u32 win[16]; + + /* SoC/Board special Initializtions */ + /* Get version from internal library */ + ddr3_print_version(); + + /*Add sub_version string */ + DEBUG_INIT_C("", SUB_VERSION, 1); + + /* Switching CPU to MRVL ID */ + soc_num = (reg_read(REG_SAMPLE_RESET_HIGH_ADDR) & SAR1_CPU_CORE_MASK) >> + SAR1_CPU_CORE_OFFSET; + switch (soc_num) { + case 0x3: + reg_bit_set(CPU_CONFIGURATION_REG(3), CPU_MRVL_ID_OFFSET); + reg_bit_set(CPU_CONFIGURATION_REG(2), CPU_MRVL_ID_OFFSET); + case 0x1: + reg_bit_set(CPU_CONFIGURATION_REG(1), CPU_MRVL_ID_OFFSET); + case 0x0: + reg_bit_set(CPU_CONFIGURATION_REG(0), CPU_MRVL_ID_OFFSET); + default: + break; + } + + /* + * Set DRAM Reset Mask in case detected GPIO indication of wakeup from + * suspend i.e the DRAM values will not be overwritten / reset when + * waking from suspend + */ + if (sys_env_suspend_wakeup_check() == + SUSPEND_WAKEUP_ENABLED_GPIO_DETECTED) { + reg_bit_set(REG_SDRAM_INIT_CTRL_ADDR, + 1 << REG_SDRAM_INIT_RESET_MASK_OFFS); + } + + /* + * Stage 0 - Set board configuration + */ + + /* Check if DRAM is already initialized */ + if (reg_read(REG_BOOTROM_ROUTINE_ADDR) & + (1 << REG_BOOTROM_ROUTINE_DRAM_INIT_OFFS)) { + printf("%s Training Sequence - 2nd boot - Skip\n", ddr_type); + return MV_OK; + } + + /* + * Stage 1 - Dunit Setup + */ + + /* Fix read ready phases for all SOC in reg 0x15c8 */ + reg = reg_read(REG_TRAINING_DEBUG_3_ADDR); + reg &= ~(REG_TRAINING_DEBUG_3_MASK); + reg |= 0x4; /* Phase 0 */ + reg &= ~(REG_TRAINING_DEBUG_3_MASK << REG_TRAINING_DEBUG_3_OFFS); + reg |= (0x4 << (1 * REG_TRAINING_DEBUG_3_OFFS)); /* Phase 1 */ + reg &= ~(REG_TRAINING_DEBUG_3_MASK << (3 * REG_TRAINING_DEBUG_3_OFFS)); + reg |= (0x6 << (3 * REG_TRAINING_DEBUG_3_OFFS)); /* Phase 3 */ + reg &= ~(REG_TRAINING_DEBUG_3_MASK << (4 * REG_TRAINING_DEBUG_3_OFFS)); + reg |= (0x6 << (4 * REG_TRAINING_DEBUG_3_OFFS)); + reg &= ~(REG_TRAINING_DEBUG_3_MASK << (5 * REG_TRAINING_DEBUG_3_OFFS)); + reg |= (0x6 << (5 * REG_TRAINING_DEBUG_3_OFFS)); + reg_write(REG_TRAINING_DEBUG_3_ADDR, reg); + + /* + * Axi_bresp_mode[8] = Compliant, + * Axi_addr_decode_cntrl[11] = Internal, + * Axi_data_bus_width[0] = 128bit + * */ + /* 0x14a8 - AXI Control Register */ + reg_write(REG_DRAM_AXI_CTRL_ADDR, 0); + + /* + * Stage 2 - Training Values Setup + */ + /* Set X-BAR windows for the training sequence */ + ddr3_save_and_set_training_windows(win); + +#ifdef SUPPORT_STATIC_DUNIT_CONFIG + /* + * Load static controller configuration (in case dynamic/generic init + * is not enabled + */ + if (generic_init_controller == 0) { + ddr3_tip_init_specific_reg_config(0, + ddr_modes + [ddr3_get_static_ddr_mode + ()].regs); + } +#endif + + /* Load topology for New Training IP */ + status = ddr3_load_topology_map(); + if (MV_OK != status) { + printf("%s Training Sequence topology load - FAILED\n", + ddr_type); + return status; + } + + /* Tune training algo paramteres */ + status = ddr3_hws_tune_training_params(0); + if (MV_OK != status) + return status; + + /* Set log level for training lib */ + ddr3_hws_set_log_level(DEBUG_BLOCK_ALL, DEBUG_LEVEL_ERROR); + + /* Start New Training IP */ + status = ddr3_hws_hw_training(); + if (MV_OK != status) { + printf("%s Training Sequence - FAILED\n", ddr_type); + return status; + } + + /* + * Stage 3 - Finish + */ + /* Restore and set windows */ + ddr3_restore_and_set_final_windows(win); + + /* Update DRAM init indication in bootROM register */ + reg = reg_read(REG_BOOTROM_ROUTINE_ADDR); + reg_write(REG_BOOTROM_ROUTINE_ADDR, + reg | (1 << REG_BOOTROM_ROUTINE_DRAM_INIT_OFFS)); + + /* DLB config */ + ddr3_new_tip_dlb_config(); + +#if defined(ECC_SUPPORT) + if (ddr3_if_ecc_enabled()) + ddr3_new_tip_ecc_scrub(); +#endif + + printf("%s Training Sequence - Ended Successfully\n", ddr_type); + + return MV_OK; +} + +/* + * Name: ddr3_get_cpu_freq + * Desc: read S@R and return CPU frequency + * Args: + * Notes: + * Returns: required value + */ +u32 ddr3_get_cpu_freq(void) +{ + return ddr3_tip_get_init_freq(); +} + +/* + * Name: ddr3_get_fab_opt + * Desc: read S@R and return CPU frequency + * Args: + * Notes: + * Returns: required value + */ +u32 ddr3_get_fab_opt(void) +{ + return 0; /* No fabric */ +} + +/* + * Name: ddr3_get_static_m_cValue - Init Memory controller with + * static parameters + * Desc: Use this routine to init the controller without the HW training + * procedure. + * User must provide compatible header file with registers data. + * Args: None. + * Notes: + * Returns: None. + */ +u32 ddr3_get_static_mc_value(u32 reg_addr, u32 offset1, u32 mask1, + u32 offset2, u32 mask2) +{ + u32 reg, temp; + + reg = reg_read(reg_addr); + + temp = (reg >> offset1) & mask1; + if (mask2) + temp |= (reg >> offset2) & mask2; + + return temp; +} + +/* + * Name: ddr3_get_static_ddr_mode - Init Memory controller with + * static parameters + * Desc: Use this routine to init the controller without the HW training + * procedure. + * User must provide compatible header file with registers data. + * Args: None. + * Notes: + * Returns: None. + */ +u32 ddr3_get_static_ddr_mode(void) +{ + u32 chip_board_rev, i; + u32 size; + + /* Valid only for A380 only, MSYS using dynamic controller config */ +#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT + /* + * Customer boards select DDR mode according to + * board ID & Sample@Reset + */ + chip_board_rev = mv_board_id_get(); +#else + /* Marvell boards select DDR mode according to Sample@Reset only */ + chip_board_rev = MARVELL_BOARD; +#endif + + size = ARRAY_SIZE(ddr_modes); + for (i = 0; i < size; i++) { + if ((ddr3_get_cpu_freq() == ddr_modes[i].cpu_freq) && + (ddr3_get_fab_opt() == ddr_modes[i].fab_freq) && + (chip_board_rev == ddr_modes[i].chip_board_rev)) + return i; + } + + DEBUG_INIT_S("\n*** Error: ddr3_get_static_ddr_mode: No match for requested DDR mode. ***\n\n"); + + return 0; +} + +/****************************************************************************** + * Name: ddr3_get_cs_num_from_reg + * Desc: + * Args: + * Notes: + * Returns: + */ +u32 ddr3_get_cs_num_from_reg(void) +{ + u32 cs_ena = sys_env_get_cs_ena_from_reg(); + u32 cs_count = 0; + u32 cs; + + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) + cs_count++; + } + + return cs_count; +} + +/* + * Name: ddr3_load_topology_map + * Desc: + * Args: + * Notes: + * Returns: + */ +int ddr3_load_topology_map(void) +{ + struct hws_topology_map *tm = ddr3_get_topology_map(); + +#if defined(MV_DDR_TOPOLOGY_UPDATE_FROM_TWSI) + /* Update topology data */ + if (MV_OK != ddr3_update_topology_map(tm)) { + DEBUG_INIT_FULL_S("Failed update of DDR3 Topology map\n"); + } +#endif + + return MV_OK; +} + +void get_target_freq(u32 freq_mode, u32 *ddr_freq, u32 *hclk_ps) +{ + u32 tmp, hclk = 200; + + switch (freq_mode) { + case 4: + tmp = 1; /* DDR_400; */ + hclk = 200; + break; + case 0x8: + tmp = 1; /* DDR_666; */ + hclk = 333; + break; + case 0xc: + tmp = 1; /* DDR_800; */ + hclk = 400; + break; + default: + *ddr_freq = 0; + *hclk_ps = 0; + break; + } + + *ddr_freq = tmp; /* DDR freq define */ + *hclk_ps = 1000000 / hclk; /* values are 1/HCLK in ps */ + + return; +} + +void ddr3_new_tip_dlb_config(void) +{ + u32 reg, i = 0; + struct dlb_config *config_table_ptr = sys_env_dlb_config_ptr_get(); + + /* Write the configuration */ + while (config_table_ptr[i].reg_addr != 0) { + reg_write(config_table_ptr[i].reg_addr, + config_table_ptr[i].reg_data); + i++; + } + + /* Enable DLB */ + reg = reg_read(REG_STATIC_DRAM_DLB_CONTROL); + reg |= DLB_ENABLE | DLB_WRITE_COALESING | DLB_AXI_PREFETCH_EN | + DLB_MBUS_PREFETCH_EN | PREFETCH_N_LN_SZ_TR; + reg_write(REG_STATIC_DRAM_DLB_CONTROL, reg); +} + +int ddr3_fast_path_dynamic_cs_size_config(u32 cs_ena) +{ + u32 reg, cs; + u32 mem_total_size = 0; + u32 cs_mem_size = 0; + u32 mem_total_size_c, cs_mem_size_c; + +#ifdef DEVICE_MAX_DRAM_ADDRESS_SIZE + u32 physical_mem_size; + u32 max_mem_size = DEVICE_MAX_DRAM_ADDRESS_SIZE; + struct hws_topology_map *tm = ddr3_get_topology_map(); +#endif + + /* Open fast path windows */ + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) { + /* get CS size */ + if (ddr3_calc_mem_cs_size(cs, &cs_mem_size) != MV_OK) + return MV_FAIL; + +#ifdef DEVICE_MAX_DRAM_ADDRESS_SIZE + /* + * if number of address pins doesn't allow to use max + * mem size that is defined in topology + * mem size is defined by DEVICE_MAX_DRAM_ADDRESS_SIZE + */ + physical_mem_size = mem_size + [tm->interface_params[0].memory_size]; + + if (ddr3_get_device_width(cs) == 16) { + /* + * 16bit mem device can be twice more - no need + * in less significant pin + */ + max_mem_size = DEVICE_MAX_DRAM_ADDRESS_SIZE * 2; + } + + if (physical_mem_size > max_mem_size) { + cs_mem_size = max_mem_size * + (ddr3_get_bus_width() / + ddr3_get_device_width(cs)); + printf("Updated Physical Mem size is from 0x%x to %x\n", + physical_mem_size, + DEVICE_MAX_DRAM_ADDRESS_SIZE); + } +#endif + + /* set fast path window control for the cs */ + reg = 0xffffe1; + reg |= (cs << 2); + reg |= (cs_mem_size - 1) & 0xffff0000; + /*Open fast path Window */ + reg_write(REG_FASTPATH_WIN_CTRL_ADDR(cs), reg); + + /* Set fast path window base address for the cs */ + reg = ((cs_mem_size) * cs) & 0xffff0000; + /* Set base address */ + reg_write(REG_FASTPATH_WIN_BASE_ADDR(cs), reg); + + /* + * Since memory size may be bigger than 4G the summ may + * be more than 32 bit word, + * so to estimate the result divide mem_total_size and + * cs_mem_size by 0x10000 (it is equal to >> 16) + */ + mem_total_size_c = mem_total_size >> 16; + cs_mem_size_c = cs_mem_size >> 16; + /* if the sum less than 2 G - calculate the value */ + if (mem_total_size_c + cs_mem_size_c < 0x10000) + mem_total_size += cs_mem_size; + else /* put max possible size */ + mem_total_size = L2_FILTER_FOR_MAX_MEMORY_SIZE; + } + } + + /* Set L2 filtering to Max Memory size */ + reg_write(ADDRESS_FILTERING_END_REGISTER, mem_total_size); + + return MV_OK; +} + +u32 ddr3_get_bus_width(void) +{ + u32 bus_width; + + bus_width = (reg_read(REG_SDRAM_CONFIG_ADDR) & 0x8000) >> + REG_SDRAM_CONFIG_WIDTH_OFFS; + + return (bus_width == 0) ? 16 : 32; +} + +u32 ddr3_get_device_width(u32 cs) +{ + u32 device_width; + + device_width = (reg_read(REG_SDRAM_ADDRESS_CTRL_ADDR) & + (0x3 << (REG_SDRAM_ADDRESS_CTRL_STRUCT_OFFS * cs))) >> + (REG_SDRAM_ADDRESS_CTRL_STRUCT_OFFS * cs); + + return (device_width == 0) ? 8 : 16; +} + +float ddr3_get_device_size(u32 cs) +{ + u32 device_size_low, device_size_high, device_size; + u32 data, cs_low_offset, cs_high_offset; + + cs_low_offset = REG_SDRAM_ADDRESS_SIZE_OFFS + cs * 4; + cs_high_offset = REG_SDRAM_ADDRESS_SIZE_OFFS + + REG_SDRAM_ADDRESS_SIZE_HIGH_OFFS + cs; + + data = reg_read(REG_SDRAM_ADDRESS_CTRL_ADDR); + device_size_low = (data >> cs_low_offset) & 0x3; + device_size_high = (data >> cs_high_offset) & 0x1; + + device_size = device_size_low | (device_size_high << 2); + + switch (device_size) { + case 0: + return 2; + case 2: + return 0.5; + case 3: + return 1; + case 4: + return 4; + case 5: + return 8; + case 1: + default: + DEBUG_INIT_C("Error: Wrong device size of Cs: ", cs, 1); + /* + * Small value will give wrong emem size in + * ddr3_calc_mem_cs_size + */ + return 0.01; + } +} + +int ddr3_calc_mem_cs_size(u32 cs, u32 *cs_size) +{ + float cs_mem_size; + + /* Calculate in GiB */ + cs_mem_size = ((ddr3_get_bus_width() / ddr3_get_device_width(cs)) * + ddr3_get_device_size(cs)) / 8; + + /* + * Multiple controller bus width, 2x for 64 bit + * (SoC controller may be 32 or 64 bit, + * so bit 15 in 0x1400, that means if whole bus used or only half, + * have a differnt meaning + */ + cs_mem_size *= DDR_CONTROLLER_BUS_WIDTH_MULTIPLIER; + + if (cs_mem_size == 0.125) { + *cs_size = 128 << 20; + } else if (cs_mem_size == 0.25) { + *cs_size = 256 << 20; + } else if (cs_mem_size == 0.5) { + *cs_size = 512 << 20; + } else if (cs_mem_size == 1) { + *cs_size = 1 << 30; + } else if (cs_mem_size == 2) { + *cs_size = 2 << 30; + } else { + DEBUG_INIT_C("Error: Wrong Memory size of Cs: ", cs, 1); + return MV_BAD_VALUE; + } + + return MV_OK; +} + +#if defined(MV_DDR_TOPOLOGY_UPDATE_FROM_TWSI) +/* + * Name: ddr3_update_topology_map + * Desc: + * Args: + * Notes: Update topology map by Sat_r values + * Returns: + */ +static int ddr3_update_topology_map(struct hws_topology_map *tm) +{ + struct topology_update_info topology_update_info; + + topology_update_info.update_width = 0; + topology_update_info.update_ecc = 0; + topology_update_info.update_ecc_pup3_mode = 0; + sys_env_get_topology_update_info(&topology_update_info); + if (topology_update_info.update_width) { + tm->bus_act_mask &= + ~(TOPOLOGY_UPDATE_WIDTH_32BIT_MASK); + if (topology_update_info.width == TOPOLOGY_UPDATE_WIDTH_16BIT) + tm->bus_act_mask = + TOPOLOGY_UPDATE_WIDTH_16BIT_MASK; + else + tm->bus_act_mask = + TOPOLOGY_UPDATE_WIDTH_32BIT_MASK; + } + + if (topology_update_info.update_ecc) { + if (topology_update_info.ecc == TOPOLOGY_UPDATE_ECC_OFF) { + tm->bus_act_mask &= + ~(1 << topology_update_info.ecc_pup_mode_offset); + } else { + tm->bus_act_mask |= + topology_update_info. + ecc << topology_update_info.ecc_pup_mode_offset; + } + } + + return MV_OK; +} +#endif + +/* + * Name: ddr3_hws_tune_training_params + * Desc: + * Args: + * Notes: Tune internal training params + * Returns: + */ +static int ddr3_hws_tune_training_params(u8 dev_num) +{ + struct tune_train_params params; + int status; + + /* NOTE: do not remove any field initilization */ + params.ck_delay = TUNE_TRAINING_PARAMS_CK_DELAY; + params.ck_delay_16 = TUNE_TRAINING_PARAMS_CK_DELAY_16; + params.p_finger = TUNE_TRAINING_PARAMS_PFINGER; + params.n_finger = TUNE_TRAINING_PARAMS_NFINGER; + params.phy_reg3_val = TUNE_TRAINING_PARAMS_PHYREG3VAL; + + status = ddr3_tip_tune_training_params(dev_num, ¶ms); + if (MV_OK != status) { + printf("%s Training Sequence - FAILED\n", ddr_type); + return status; + } + + return MV_OK; +} diff --git a/drivers/ddr/marvell/a38x/ddr3_init.h b/drivers/ddr/marvell/a38x/ddr3_init.h new file mode 100644 index 0000000..e2ff040 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_init.h @@ -0,0 +1,395 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_INIT_H +#define _DDR3_INIT_H + +#if defined(CONFIG_ARMADA_38X) +#include "ddr3_a38x.h" +#include "ddr3_a38x_mc_static.h" +#include "ddr3_a38x_topology.h" +#endif +#include "ddr3_hws_hw_training.h" +#include "ddr3_hws_sil_training.h" +#include "ddr3_logging_def.h" +#include "ddr3_training_hw_algo.h" +#include "ddr3_training_ip.h" +#include "ddr3_training_ip_centralization.h" +#include "ddr3_training_ip_engine.h" +#include "ddr3_training_ip_flow.h" +#include "ddr3_training_ip_pbs.h" +#include "ddr3_training_ip_prv_if.h" +#include "ddr3_training_ip_static.h" +#include "ddr3_training_leveling.h" +#include "xor.h" + +/* + * MV_DEBUG_INIT need to be defines, otherwise the output of the + * DDR2 training code is not complete and misleading + */ +#define MV_DEBUG_INIT + +#define BIT(x) (1 << (x)) + +#ifdef MV_DEBUG_INIT +#define DEBUG_INIT_S(s) puts(s) +#define DEBUG_INIT_D(d, l) printf("%x", d) +#define DEBUG_INIT_D_10(d, l) printf("%d", d) +#else +#define DEBUG_INIT_S(s) +#define DEBUG_INIT_D(d, l) +#define DEBUG_INIT_D_10(d, l) +#endif + +#ifdef MV_DEBUG_INIT_FULL +#define DEBUG_INIT_FULL_S(s) puts(s) +#define DEBUG_INIT_FULL_D(d, l) printf("%x", d) +#define DEBUG_INIT_FULL_D_10(d, l) printf("%d", d) +#define DEBUG_WR_REG(reg, val) \ + { DEBUG_INIT_S("Write Reg: 0x"); DEBUG_INIT_D((reg), 8); \ + DEBUG_INIT_S("= "); DEBUG_INIT_D((val), 8); DEBUG_INIT_S("\n"); } +#define DEBUG_RD_REG(reg, val) \ + { DEBUG_INIT_S("Read Reg: 0x"); DEBUG_INIT_D((reg), 8); \ + DEBUG_INIT_S("= "); DEBUG_INIT_D((val), 8); DEBUG_INIT_S("\n"); } +#else +#define DEBUG_INIT_FULL_S(s) +#define DEBUG_INIT_FULL_D(d, l) +#define DEBUG_INIT_FULL_D_10(d, l) +#define DEBUG_WR_REG(reg, val) +#define DEBUG_RD_REG(reg, val) +#endif + +#define DEBUG_INIT_FULL_C(s, d, l) \ + { DEBUG_INIT_FULL_S(s); \ + DEBUG_INIT_FULL_D(d, l); \ + DEBUG_INIT_FULL_S("\n"); } +#define DEBUG_INIT_C(s, d, l) \ + { DEBUG_INIT_S(s); DEBUG_INIT_D(d, l); DEBUG_INIT_S("\n"); } + +/* + * Debug (Enable/Disable modules) and Error report + */ + +#ifdef BASIC_DEBUG +#define MV_DEBUG_WL +#define MV_DEBUG_RL +#define MV_DEBUG_DQS_RESULTS +#endif + +#ifdef FULL_DEBUG +#define MV_DEBUG_WL +#define MV_DEBUG_RL +#define MV_DEBUG_DQS + +#define MV_DEBUG_PBS +#define MV_DEBUG_DFS +#define MV_DEBUG_MAIN_FULL +#define MV_DEBUG_DFS_FULL +#define MV_DEBUG_DQS_FULL +#define MV_DEBUG_RL_FULL +#define MV_DEBUG_WL_FULL +#endif + +#if defined(CONFIG_ARMADA_38X) +#include "ddr3_a38x.h" +#include "ddr3_a38x_topology.h" +#endif + +/* The following is a list of Marvell status */ +#define MV_ERROR (-1) +#define MV_OK (0x00) /* Operation succeeded */ +#define MV_FAIL (0x01) /* Operation failed */ +#define MV_BAD_VALUE (0x02) /* Illegal value (general) */ +#define MV_OUT_OF_RANGE (0x03) /* The value is out of range */ +#define MV_BAD_PARAM (0x04) /* Illegal parameter in function called */ +#define MV_BAD_PTR (0x05) /* Illegal pointer value */ +#define MV_BAD_SIZE (0x06) /* Illegal size */ +#define MV_BAD_STATE (0x07) /* Illegal state of state machine */ +#define MV_SET_ERROR (0x08) /* Set operation failed */ +#define MV_GET_ERROR (0x09) /* Get operation failed */ +#define MV_CREATE_ERROR (0x0a) /* Fail while creating an item */ +#define MV_NOT_FOUND (0x0b) /* Item not found */ +#define MV_NO_MORE (0x0c) /* No more items found */ +#define MV_NO_SUCH (0x0d) /* No such item */ +#define MV_TIMEOUT (0x0e) /* Time Out */ +#define MV_NO_CHANGE (0x0f) /* Parameter(s) is already in this value */ +#define MV_NOT_SUPPORTED (0x10) /* This request is not support */ +#define MV_NOT_IMPLEMENTED (0x11) /* Request supported but not implemented*/ +#define MV_NOT_INITIALIZED (0x12) /* The item is not initialized */ +#define MV_NO_RESOURCE (0x13) /* Resource not available (memory ...) */ +#define MV_FULL (0x14) /* Item is full (Queue or table etc...) */ +#define MV_EMPTY (0x15) /* Item is empty (Queue or table etc...) */ +#define MV_INIT_ERROR (0x16) /* Error occured while INIT process */ +#define MV_HW_ERROR (0x17) /* Hardware error */ +#define MV_TX_ERROR (0x18) /* Transmit operation not succeeded */ +#define MV_RX_ERROR (0x19) /* Recieve operation not succeeded */ +#define MV_NOT_READY (0x1a) /* The other side is not ready yet */ +#define MV_ALREADY_EXIST (0x1b) /* Tried to create existing item */ +#define MV_OUT_OF_CPU_MEM (0x1c) /* Cpu memory allocation failed. */ +#define MV_NOT_STARTED (0x1d) /* Not started yet */ +#define MV_BUSY (0x1e) /* Item is busy. */ +#define MV_TERMINATE (0x1f) /* Item terminates it's work. */ +#define MV_NOT_ALIGNED (0x20) /* Wrong alignment */ +#define MV_NOT_ALLOWED (0x21) /* Operation NOT allowed */ +#define MV_WRITE_PROTECT (0x22) /* Write protected */ +#define MV_INVALID (int)(-1) + +/* For checking function return values */ +#define CHECK_STATUS(orig_func) \ + { \ + int status; \ + status = orig_func; \ + if (MV_OK != status) \ + return status; \ + } + +enum log_level { + MV_LOG_LEVEL_0, + MV_LOG_LEVEL_1, + MV_LOG_LEVEL_2, + MV_LOG_LEVEL_3 +}; + +/* Globals */ +extern u8 debug_training; +extern u8 is_reg_dump; +extern u8 generic_init_controller; +extern u32 freq_val[]; +extern u32 is_pll_old; +extern struct cl_val_per_freq cas_latency_table[]; +extern struct pattern_info pattern_table[]; +extern struct cl_val_per_freq cas_write_latency_table[]; +extern u8 debug_training; +extern u8 debug_centralization, debug_training_ip, debug_training_bist, + debug_pbs, debug_training_static, debug_leveling; +extern u32 pipe_multicast_mask; +extern struct hws_tip_config_func_db config_func_info[]; +extern u8 cs_mask_reg[]; +extern u8 twr_mask_table[]; +extern u8 cl_mask_table[]; +extern u8 cwl_mask_table[]; +extern u16 rfc_table[]; +extern u32 speed_bin_table_t_rc[]; +extern u32 speed_bin_table_t_rcd_t_rp[]; +extern u32 ck_delay, ck_delay_16; + +extern u32 g_zpri_data; +extern u32 g_znri_data; +extern u32 g_zpri_ctrl; +extern u32 g_znri_ctrl; +extern u32 g_zpodt_data; +extern u32 g_znodt_data; +extern u32 g_zpodt_ctrl; +extern u32 g_znodt_ctrl; +extern u32 g_dic; +extern u32 g_odt_config; +extern u32 g_rtt_nom; + +extern u8 debug_training_access; +extern u8 debug_training_a38x; +extern u32 first_active_if; +extern enum hws_ddr_freq init_freq; +extern u32 delay_enable, ck_delay, ck_delay_16, ca_delay; +extern u32 mask_tune_func; +extern u32 rl_version; +extern int rl_mid_freq_wa; +extern u8 calibration_update_control; /* 2 external only, 1 is internal only */ +extern enum hws_ddr_freq medium_freq; + +extern u32 ck_delay, ck_delay_16; +extern enum hws_result training_result[MAX_STAGE_LIMIT][MAX_INTERFACE_NUM]; +extern u32 first_active_if; +extern u32 mask_tune_func; +extern u32 freq_val[]; +extern enum hws_ddr_freq init_freq; +extern enum hws_ddr_freq low_freq; +extern enum hws_ddr_freq medium_freq; +extern u8 generic_init_controller; +extern enum auto_tune_stage training_stage; +extern u32 is_pll_before_init; +extern u32 is_adll_calib_before_init; +extern u32 is_dfs_in_init; +extern int wl_debug_delay; +extern u32 silicon_delay[HWS_MAX_DEVICE_NUM]; +extern u32 p_finger; +extern u32 n_finger; +extern u32 freq_val[DDR_FREQ_LIMIT]; +extern u32 start_pattern, end_pattern; +extern u32 phy_reg0_val; +extern u32 phy_reg1_val; +extern u32 phy_reg2_val; +extern u32 phy_reg3_val; +extern enum hws_pattern sweep_pattern; +extern enum hws_pattern pbs_pattern; +extern u8 is_rzq6; +extern u32 znri_data_phy_val; +extern u32 zpri_data_phy_val; +extern u32 znri_ctrl_phy_val; +extern u32 zpri_ctrl_phy_val; +extern u8 debug_training_access; +extern u32 finger_test, p_finger_start, p_finger_end, n_finger_start, + n_finger_end, p_finger_step, n_finger_step; +extern u32 mode2_t; +extern u32 xsb_validate_type; +extern u32 xsb_validation_base_address; +extern u32 odt_additional; +extern u32 debug_mode; +extern u32 delay_enable; +extern u32 ca_delay; +extern u32 debug_dunit; +extern u32 clamp_tbl[]; +extern u32 freq_mask[HWS_MAX_DEVICE_NUM][DDR_FREQ_LIMIT]; +extern u32 start_pattern, end_pattern; + +extern u32 maxt_poll_tries; +extern u32 is_bist_reset_bit; +extern u8 debug_training_bist; + +extern u8 vref_window_size[MAX_INTERFACE_NUM][MAX_BUS_NUM]; +extern u32 debug_mode; +extern u32 effective_cs; +extern int ddr3_tip_centr_skip_min_win_check; +extern u32 *dq_map_table; +extern enum auto_tune_stage training_stage; +extern u8 debug_centralization; + +extern u32 delay_enable; +extern u32 start_pattern, end_pattern; +extern u32 freq_val[DDR_FREQ_LIMIT]; +extern u8 debug_training_hw_alg; +extern enum auto_tune_stage training_stage; + +extern u8 debug_training_ip; +extern enum hws_result training_result[MAX_STAGE_LIMIT][MAX_INTERFACE_NUM]; +extern enum auto_tune_stage training_stage; +extern u32 effective_cs; + +extern u8 debug_leveling; +extern enum hws_result training_result[MAX_STAGE_LIMIT][MAX_INTERFACE_NUM]; +extern enum auto_tune_stage training_stage; +extern u32 rl_version; +extern struct cl_val_per_freq cas_latency_table[]; +extern u32 start_xsb_offset; +extern u32 debug_mode; +extern u32 odt_config; +extern u32 effective_cs; +extern u32 phy_reg1_val; + +extern u8 debug_pbs; +extern u32 effective_cs; +extern u16 mask_results_dq_reg_map[]; +extern enum hws_ddr_freq medium_freq; +extern u32 freq_val[]; +extern enum hws_result training_result[MAX_STAGE_LIMIT][MAX_INTERFACE_NUM]; +extern enum auto_tune_stage training_stage; +extern u32 debug_mode; +extern u32 *dq_map_table; + +extern u32 vref; +extern struct cl_val_per_freq cas_latency_table[]; +extern u32 target_freq; +extern struct hws_tip_config_func_db config_func_info[HWS_MAX_DEVICE_NUM]; +extern u32 clamp_tbl[]; +extern u32 init_freq; +/* list of allowed frequency listed in order of enum hws_ddr_freq */ +extern u32 freq_val[]; +extern u8 debug_training_static; +extern u32 first_active_if; + +/* Prototypes */ +int ddr3_tip_enable_init_sequence(u32 dev_num); + +int ddr3_tip_init_a38x(u32 dev_num, u32 board_id); + +int ddr3_hws_hw_training(void); +int ddr3_silicon_pre_init(void); +int ddr3_silicon_post_init(void); +int ddr3_post_run_alg(void); +int ddr3_if_ecc_enabled(void); +void ddr3_new_tip_ecc_scrub(void); + +void ddr3_print_version(void); +void ddr3_new_tip_dlb_config(void); +struct hws_topology_map *ddr3_get_topology_map(void); + +int ddr3_if_ecc_enabled(void); +int ddr3_tip_reg_write(u32 dev_num, u32 reg_addr, u32 data); +int ddr3_tip_reg_read(u32 dev_num, u32 reg_addr, u32 *data, u32 reg_mask); +int ddr3_silicon_get_ddr_target_freq(u32 *ddr_freq); +int ddr3_tip_a38x_get_freq_config(u8 dev_num, enum hws_ddr_freq freq, + struct hws_tip_freq_config_info + *freq_config_info); +int ddr3_a38x_update_topology_map(u32 dev_num, + struct hws_topology_map *topology_map); +int ddr3_tip_a38x_get_init_freq(int dev_num, enum hws_ddr_freq *freq); +int ddr3_tip_a38x_get_medium_freq(int dev_num, enum hws_ddr_freq *freq); +int ddr3_tip_a38x_if_read(u8 dev_num, enum hws_access_type interface_access, + u32 if_id, u32 reg_addr, u32 *data, u32 mask); +int ddr3_tip_a38x_if_write(u8 dev_num, enum hws_access_type interface_access, + u32 if_id, u32 reg_addr, u32 data, u32 mask); +int ddr3_tip_a38x_get_device_info(u8 dev_num, + struct ddr3_device_info *info_ptr); + +int ddr3_tip_init_a38x(u32 dev_num, u32 board_id); + +int print_adll(u32 dev_num, u32 adll[MAX_INTERFACE_NUM * MAX_BUS_NUM]); +int ddr3_tip_restore_dunit_regs(u32 dev_num); +void print_topology(struct hws_topology_map *topology_db); + +u32 mv_board_id_get(void); + +int ddr3_load_topology_map(void); +int ddr3_tip_init_specific_reg_config(u32 dev_num, + struct reg_data *reg_config_arr); +u32 ddr3_tip_get_init_freq(void); +void ddr3_hws_set_log_level(enum ddr_lib_debug_block block, u8 level); +int ddr3_tip_tune_training_params(u32 dev_num, + struct tune_train_params *params); +void get_target_freq(u32 freq_mode, u32 *ddr_freq, u32 *hclk_ps); +int ddr3_fast_path_dynamic_cs_size_config(u32 cs_ena); +void ddr3_fast_path_static_cs_size_config(u32 cs_ena); +u32 ddr3_get_device_width(u32 cs); +u32 mv_board_id_index_get(u32 board_id); +u32 mv_board_id_get(void); +u32 ddr3_get_bus_width(void); +void ddr3_set_log_level(u32 n_log_level); +int ddr3_calc_mem_cs_size(u32 cs, u32 *cs_size); + +int hws_ddr3_cs_base_adr_calc(u32 if_id, u32 cs, u32 *cs_base_addr); + +int ddr3_tip_print_pbs_result(u32 dev_num, u32 cs_num, enum pbs_dir pbs_mode); +int ddr3_tip_clean_pbs_result(u32 dev_num, enum pbs_dir pbs_mode); + +int ddr3_tip_static_round_trip_arr_build(u32 dev_num, + struct trip_delay_element *table_ptr, + int is_wl, u32 *round_trip_delay_arr); + +u32 hws_ddr3_tip_max_cs_get(void); + +/* + * Accessor functions for the registers + */ +static inline void reg_write(u32 addr, u32 val) +{ + writel(val, INTER_REGS_BASE + addr); +} + +static inline u32 reg_read(u32 addr) +{ + return readl(INTER_REGS_BASE + addr); +} + +static inline void reg_bit_set(u32 addr, u32 mask) +{ + setbits_le32(INTER_REGS_BASE + addr, mask); +} + +static inline void reg_bit_clr(u32 addr, u32 mask) +{ + clrbits_le32(INTER_REGS_BASE + addr, mask); +} + +#endif /* _DDR3_INIT_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_logging_def.h b/drivers/ddr/marvell/a38x/ddr3_logging_def.h new file mode 100644 index 0000000..2de7c4f --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_logging_def.h @@ -0,0 +1,101 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_LOGGING_CONFIG_H +#define _DDR3_LOGGING_CONFIG_H + +#ifdef SILENT_LIB +#define DEBUG_TRAINING_BIST_ENGINE(level, s) +#define DEBUG_TRAINING_IP(level, s) +#define DEBUG_CENTRALIZATION_ENGINE(level, s) +#define DEBUG_TRAINING_HW_ALG(level, s) +#define DEBUG_TRAINING_IP_ENGINE(level, s) +#define DEBUG_LEVELING(level, s) +#define DEBUG_PBS_ENGINE(level, s) +#define DEBUG_TRAINING_STATIC_IP(level, s) +#define DEBUG_TRAINING_ACCESS(level, s) +#else +#ifdef LIB_FUNCTIONAL_DEBUG_ONLY +#define DEBUG_TRAINING_BIST_ENGINE(level, s) +#define DEBUG_TRAINING_IP_ENGINE(level, s) +#define DEBUG_TRAINING_IP(level, s) \ + if (level >= debug_training) \ + printf s +#define DEBUG_CENTRALIZATION_ENGINE(level, s) \ + if (level >= debug_centralization) \ + printf s +#define DEBUG_TRAINING_HW_ALG(level, s) \ + if (level >= debug_training_hw_alg) \ + printf s +#define DEBUG_LEVELING(level, s) \ + if (level >= debug_leveling) \ + printf s +#define DEBUG_PBS_ENGINE(level, s) \ + if (level >= debug_pbs) \ + printf s +#define DEBUG_TRAINING_STATIC_IP(level, s) \ + if (level >= debug_training_static) \ + printf s +#define DEBUG_TRAINING_ACCESS(level, s) \ + if (level >= debug_training_access) \ + printf s +#else +#define DEBUG_TRAINING_BIST_ENGINE(level, s) \ + if (level >= debug_training_bist) \ + printf s + +#define DEBUG_TRAINING_IP_ENGINE(level, s) \ + if (level >= debug_training_ip) \ + printf s +#define DEBUG_TRAINING_IP(level, s) \ + if (level >= debug_training) \ + printf s +#define DEBUG_CENTRALIZATION_ENGINE(level, s) \ + if (level >= debug_centralization) \ + printf s +#define DEBUG_TRAINING_HW_ALG(level, s) \ + if (level >= debug_training_hw_alg) \ + printf s +#define DEBUG_LEVELING(level, s) \ + if (level >= debug_leveling) \ + printf s +#define DEBUG_PBS_ENGINE(level, s) \ + if (level >= debug_pbs) \ + printf s +#define DEBUG_TRAINING_STATIC_IP(level, s) \ + if (level >= debug_training_static) \ + printf s +#define DEBUG_TRAINING_ACCESS(level, s) \ + if (level >= debug_training_access) \ + printf s +#endif +#endif + +/* Logging defines */ +#define DEBUG_LEVEL_TRACE 1 +#define DEBUG_LEVEL_INFO 2 +#define DEBUG_LEVEL_ERROR 3 + +enum ddr_lib_debug_block { + DEBUG_BLOCK_STATIC, + DEBUG_BLOCK_TRAINING_MAIN, + DEBUG_BLOCK_LEVELING, + DEBUG_BLOCK_CENTRALIZATION, + DEBUG_BLOCK_PBS, + DEBUG_BLOCK_IP, + DEBUG_BLOCK_BIST, + DEBUG_BLOCK_ALG, + DEBUG_BLOCK_DEVICE, + DEBUG_BLOCK_ACCESS, + DEBUG_STAGES_REG_DUMP, + /* All excluding IP and REG_DUMP, should be enabled separatelly */ + DEBUG_BLOCK_ALL +}; + +int ddr3_tip_print_log(u32 dev_num, u32 mem_addr); +int ddr3_tip_print_stability_log(u32 dev_num); + +#endif /* _DDR3_LOGGING_CONFIG_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_patterns_64bit.h b/drivers/ddr/marvell/a38x/ddr3_patterns_64bit.h new file mode 100644 index 0000000..0ce0479 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_patterns_64bit.h @@ -0,0 +1,924 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __DDR3_PATTERNS_64_H +#define __DDR3_PATTERNS_64_H + +/* + * Patterns Declerations + */ + +u32 wl_sup_pattern[LEN_WL_SUP_PATTERN] __aligned(32) = { + 0x04030201, 0x08070605, 0x0c0b0a09, 0x100f0e0d, + 0x14131211, 0x18171615, 0x1c1b1a19, 0x201f1e1d, + 0x24232221, 0x28272625, 0x2c2b2a29, 0x302f2e2d, + 0x34333231, 0x38373635, 0x3c3b3a39, 0x403f3e3d, + 0x44434241, 0x48474645, 0x4c4b4a49, 0x504f4e4d, + 0x54535251, 0x58575655, 0x5c5b5a59, 0x605f5e5d, + 0x64636261, 0x68676665, 0x6c6b6a69, 0x706f6e6d, + 0x74737271, 0x78777675, 0x7c7b7a79, 0x807f7e7d +}; + +u32 pbs_pattern_32b[2][LEN_PBS_PATTERN] __aligned(32) = { + { + 0xaaaaaaaa, 0x55555555, 0xaaaaaaaa, 0x55555555, + 0xaaaaaaaa, 0x55555555, 0xaaaaaaaa, 0x55555555, + 0xaaaaaaaa, 0x55555555, 0xaaaaaaaa, 0x55555555, + 0xaaaaaaaa, 0x55555555, 0xaaaaaaaa, 0x55555555 + }, + { + 0x55555555, 0xaaaaaaaa, 0x55555555, 0xaaaaaaaa, + 0x55555555, 0xaaaaaaaa, 0x55555555, 0xaaaaaaaa, + 0x55555555, 0xaaaaaaaa, 0x55555555, 0xaaaaaaaa, + 0x55555555, 0xaaaaaaaa, 0x55555555, 0xaaaaaaaa + } +}; + +u32 pbs_pattern_64b[2][LEN_PBS_PATTERN] __aligned(32) = { + { + 0xaaaaaaaa, 0xaaaaaaaa, 0x55555555, 0x55555555, + 0xaaaaaaaa, 0xaaaaaaaa, 0x55555555, 0x55555555, + 0xaaaaaaaa, 0xaaaaaaaa, 0x55555555, 0x55555555, + 0xaaaaaaaa, 0xaaaaaaaa, 0x55555555, 0x55555555 + }, + { + 0x55555555, 0x55555555, 0xaaaaaaaa, 0xaaaaaaaa, + 0x55555555, 0x55555555, 0xaaaaaaaa, 0xaaaaaaaa, + 0x55555555, 0x55555555, 0xaaaaaaaa, 0xaaaaaaaa, + 0x55555555, 0x55555555, 0xaaaaaaaa, 0xaaaaaaaa + } +}; + +u32 rl_pattern[LEN_STD_PATTERN] __aligned(32) = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x01010101, 0x01010101, 0x01010101, 0x01010101 +}; + +u32 killer_pattern_32b[DQ_NUM][LEN_KILLER_PATTERN] __aligned(32) = { + { + 0x01010101, 0x00000000, 0x01010101, 0xffffffff, + 0x01010101, 0x00000000, 0x01010101, 0xffffffff, + 0xfefefefe, 0xfefefefe, 0x01010101, 0xfefefefe, + 0xfefefefe, 0xfefefefe, 0x01010101, 0xfefefefe, + 0x01010101, 0xfefefefe, 0x01010101, 0x01010101, + 0x01010101, 0xfefefefe, 0x01010101, 0x01010101, + 0xfefefefe, 0x01010101, 0xfefefefe, 0x00000000, + 0xfefefefe, 0x01010101, 0xfefefefe, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x01010101, + 0xffffffff, 0x00000000, 0xffffffff, 0x01010101, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0xfefefefe, + 0x00000000, 0x00000000, 0x00000000, 0xfefefefe, + 0xfefefefe, 0xffffffff, 0x00000000, 0x00000000, + 0xfefefefe, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0xfefefefe, 0x00000000, 0xfefefefe, 0x00000000, + 0xfefefefe, 0x00000000, 0xfefefefe, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x01010101, + 0x00000000, 0xffffffff, 0xffffffff, 0x01010101, + 0xffffffff, 0xffffffff, 0x01010101, 0x00000000, + 0xffffffff, 0xffffffff, 0x01010101, 0x00000000, + 0x01010101, 0xffffffff, 0xfefefefe, 0xfefefefe, + 0x01010101, 0xffffffff, 0xfefefefe, 0xfefefefe + }, + { + 0x02020202, 0x00000000, 0x02020202, 0xffffffff, + 0x02020202, 0x00000000, 0x02020202, 0xffffffff, + 0xfdfdfdfd, 0xfdfdfdfd, 0x02020202, 0xfdfdfdfd, + 0xfdfdfdfd, 0xfdfdfdfd, 0x02020202, 0xfdfdfdfd, + 0x02020202, 0xfdfdfdfd, 0x02020202, 0x02020202, + 0x02020202, 0xfdfdfdfd, 0x02020202, 0x02020202, + 0xfdfdfdfd, 0x02020202, 0xfdfdfdfd, 0x00000000, + 0xfdfdfdfd, 0x02020202, 0xfdfdfdfd, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x02020202, + 0xffffffff, 0x00000000, 0xffffffff, 0x02020202, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0xfdfdfdfd, + 0x00000000, 0x00000000, 0x00000000, 0xfdfdfdfd, + 0xfdfdfdfd, 0xffffffff, 0x00000000, 0x00000000, + 0xfdfdfdfd, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0xfdfdfdfd, 0x00000000, 0xfdfdfdfd, 0x00000000, + 0xfdfdfdfd, 0x00000000, 0xfdfdfdfd, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x02020202, + 0x00000000, 0xffffffff, 0xffffffff, 0x02020202, + 0xffffffff, 0xffffffff, 0x02020202, 0x00000000, + 0xffffffff, 0xffffffff, 0x02020202, 0x00000000, + 0x02020202, 0xffffffff, 0xfdfdfdfd, 0xfdfdfdfd, + 0x02020202, 0xffffffff, 0xfdfdfdfd, 0xfdfdfdfd + }, + { + 0x04040404, 0x00000000, 0x04040404, 0xffffffff, + 0x04040404, 0x00000000, 0x04040404, 0xffffffff, + 0xfbfbfbfb, 0xfbfbfbfb, 0x04040404, 0xfbfbfbfb, + 0xfbfbfbfb, 0xfbfbfbfb, 0x04040404, 0xfbfbfbfb, + 0x04040404, 0xfbfbfbfb, 0x04040404, 0x04040404, + 0x04040404, 0xfbfbfbfb, 0x04040404, 0x04040404, + 0xfbfbfbfb, 0x04040404, 0xfbfbfbfb, 0x00000000, + 0xfbfbfbfb, 0x04040404, 0xfbfbfbfb, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x04040404, + 0xffffffff, 0x00000000, 0xffffffff, 0x04040404, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0xfbfbfbfb, + 0x00000000, 0x00000000, 0x00000000, 0xfbfbfbfb, + 0xfbfbfbfb, 0xffffffff, 0x00000000, 0x00000000, + 0xfbfbfbfb, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0xfbfbfbfb, 0x00000000, 0xfbfbfbfb, 0x00000000, + 0xfbfbfbfb, 0x00000000, 0xfbfbfbfb, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x04040404, + 0x00000000, 0xffffffff, 0xffffffff, 0x04040404, + 0xffffffff, 0xffffffff, 0x04040404, 0x00000000, + 0xffffffff, 0xffffffff, 0x04040404, 0x00000000, + 0x04040404, 0xffffffff, 0xfbfbfbfb, 0xfbfbfbfb, + 0x04040404, 0xffffffff, 0xfbfbfbfb, 0xfbfbfbfb + }, + { + 0x08080808, 0x00000000, 0x08080808, 0xffffffff, + 0x08080808, 0x00000000, 0x08080808, 0xffffffff, + 0xf7f7f7f7, 0xf7f7f7f7, 0x08080808, 0xf7f7f7f7, + 0xf7f7f7f7, 0xf7f7f7f7, 0x08080808, 0xf7f7f7f7, + 0x08080808, 0xf7f7f7f7, 0x08080808, 0x08080808, + 0x08080808, 0xf7f7f7f7, 0x08080808, 0x08080808, + 0xf7f7f7f7, 0x08080808, 0xf7f7f7f7, 0x00000000, + 0xf7f7f7f7, 0x08080808, 0xf7f7f7f7, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x08080808, + 0xffffffff, 0x00000000, 0xffffffff, 0x08080808, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0xf7f7f7f7, + 0x00000000, 0x00000000, 0x00000000, 0xf7f7f7f7, + 0xf7f7f7f7, 0xffffffff, 0x00000000, 0x00000000, + 0xf7f7f7f7, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0xf7f7f7f7, 0x00000000, 0xf7f7f7f7, 0x00000000, + 0xf7f7f7f7, 0x00000000, 0xf7f7f7f7, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x08080808, + 0x00000000, 0xffffffff, 0xffffffff, 0x08080808, + 0xffffffff, 0xffffffff, 0x08080808, 0x00000000, + 0xffffffff, 0xffffffff, 0x08080808, 0x00000000, + 0x08080808, 0xffffffff, 0xf7f7f7f7, 0xf7f7f7f7, + 0x08080808, 0xffffffff, 0xf7f7f7f7, 0xf7f7f7f7 + }, + { + 0x10101010, 0x00000000, 0x10101010, 0xffffffff, + 0x10101010, 0x00000000, 0x10101010, 0xffffffff, + 0xefefefef, 0xefefefef, 0x10101010, 0xefefefef, + 0xefefefef, 0xefefefef, 0x10101010, 0xefefefef, + 0x10101010, 0xefefefef, 0x10101010, 0x10101010, + 0x10101010, 0xefefefef, 0x10101010, 0x10101010, + 0xefefefef, 0x10101010, 0xefefefef, 0x00000000, + 0xefefefef, 0x10101010, 0xefefefef, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x10101010, + 0xffffffff, 0x00000000, 0xffffffff, 0x10101010, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0xefefefef, + 0x00000000, 0x00000000, 0x00000000, 0xefefefef, + 0xefefefef, 0xffffffff, 0x00000000, 0x00000000, + 0xefefefef, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0xefefefef, 0x00000000, 0xefefefef, 0x00000000, + 0xefefefef, 0x00000000, 0xefefefef, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x10101010, + 0x00000000, 0xffffffff, 0xffffffff, 0x10101010, + 0xffffffff, 0xffffffff, 0x10101010, 0x00000000, + 0xffffffff, 0xffffffff, 0x10101010, 0x00000000, + 0x10101010, 0xffffffff, 0xefefefef, 0xefefefef, + 0x10101010, 0xffffffff, 0xefefefef, 0xefefefef + }, + { + 0x20202020, 0x00000000, 0x20202020, 0xffffffff, + 0x20202020, 0x00000000, 0x20202020, 0xffffffff, + 0xdfdfdfdf, 0xdfdfdfdf, 0x20202020, 0xdfdfdfdf, + 0xdfdfdfdf, 0xdfdfdfdf, 0x20202020, 0xdfdfdfdf, + 0x20202020, 0xdfdfdfdf, 0x20202020, 0x20202020, + 0x20202020, 0xdfdfdfdf, 0x20202020, 0x20202020, + 0xdfdfdfdf, 0x20202020, 0xdfdfdfdf, 0x00000000, + 0xdfdfdfdf, 0x20202020, 0xdfdfdfdf, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x20202020, + 0xffffffff, 0x00000000, 0xffffffff, 0x20202020, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0xdfdfdfdf, + 0x00000000, 0x00000000, 0x00000000, 0xdfdfdfdf, + 0xdfdfdfdf, 0xffffffff, 0x00000000, 0x00000000, + 0xdfdfdfdf, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0xdfdfdfdf, 0x00000000, 0xdfdfdfdf, 0x00000000, + 0xdfdfdfdf, 0x00000000, 0xdfdfdfdf, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x20202020, + 0x00000000, 0xffffffff, 0xffffffff, 0x20202020, + 0xffffffff, 0xffffffff, 0x20202020, 0x00000000, + 0xffffffff, 0xffffffff, 0x20202020, 0x00000000, + 0x20202020, 0xffffffff, 0xdfdfdfdf, 0xdfdfdfdf, + 0x20202020, 0xffffffff, 0xdfdfdfdf, 0xdfdfdfdf + }, + { + 0x40404040, 0x00000000, 0x40404040, 0xffffffff, + 0x40404040, 0x00000000, 0x40404040, 0xffffffff, + 0xbfbfbfbf, 0xbfbfbfbf, 0x40404040, 0xbfbfbfbf, + 0xbfbfbfbf, 0xbfbfbfbf, 0x40404040, 0xbfbfbfbf, + 0x40404040, 0xbfbfbfbf, 0x40404040, 0x40404040, + 0x40404040, 0xbfbfbfbf, 0x40404040, 0x40404040, + 0xbfbfbfbf, 0x40404040, 0xbfbfbfbf, 0x00000000, + 0xbfbfbfbf, 0x40404040, 0xbfbfbfbf, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x40404040, + 0xffffffff, 0x00000000, 0xffffffff, 0x40404040, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0xbfbfbfbf, + 0x00000000, 0x00000000, 0x00000000, 0xbfbfbfbf, + 0xbfbfbfbf, 0xffffffff, 0x00000000, 0x00000000, + 0xbfbfbfbf, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0xbfbfbfbf, 0x00000000, 0xbfbfbfbf, 0x00000000, + 0xbfbfbfbf, 0x00000000, 0xbfbfbfbf, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x40404040, + 0x00000000, 0xffffffff, 0xffffffff, 0x40404040, + 0xffffffff, 0xffffffff, 0x40404040, 0x00000000, + 0xffffffff, 0xffffffff, 0x40404040, 0x00000000, + 0x40404040, 0xffffffff, 0xbfbfbfbf, 0xbfbfbfbf, + 0x40404040, 0xffffffff, 0xbfbfbfbf, 0xbfbfbfbf + }, + { + 0x80808080, 0x00000000, 0x80808080, 0xffffffff, + 0x80808080, 0x00000000, 0x80808080, 0xffffffff, + 0x7f7f7f7f, 0x7f7f7f7f, 0x80808080, 0x7f7f7f7f, + 0x7f7f7f7f, 0x7f7f7f7f, 0x80808080, 0x7f7f7f7f, + 0x80808080, 0x7f7f7f7f, 0x80808080, 0x80808080, + 0x80808080, 0x7f7f7f7f, 0x80808080, 0x80808080, + 0x7f7f7f7f, 0x80808080, 0x7f7f7f7f, 0x00000000, + 0x7f7f7f7f, 0x80808080, 0x7f7f7f7f, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, + 0xffffffff, 0x00000000, 0xffffffff, 0x80808080, + 0xffffffff, 0x00000000, 0xffffffff, 0x80808080, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x7f7f7f7f, + 0x00000000, 0x00000000, 0x00000000, 0x7f7f7f7f, + 0x7f7f7f7f, 0xffffffff, 0x00000000, 0x00000000, + 0x7f7f7f7f, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x00000000, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, + 0x7f7f7f7f, 0x00000000, 0x7f7f7f7f, 0x00000000, + 0x7f7f7f7f, 0x00000000, 0x7f7f7f7f, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0x80808080, + 0x00000000, 0xffffffff, 0xffffffff, 0x80808080, + 0xffffffff, 0xffffffff, 0x80808080, 0x00000000, + 0xffffffff, 0xffffffff, 0x80808080, 0x00000000, + 0x80808080, 0xffffffff, 0x7f7f7f7f, 0x7f7f7f7f, + 0x80808080, 0xffffffff, 0x7f7f7f7f, 0x7f7f7f7f + } +}; + +u32 killer_pattern_64b[DQ_NUM][LEN_KILLER_PATTERN] __aligned(32) = { + { + 0x01010101, 0x01010101, 0x00000000, 0x00000000, + 0x01010101, 0x01010101, 0xffffffff, 0xffffffff, + 0xfefefefe, 0xfefefefe, 0xfefefefe, 0xfefefefe, + 0x01010101, 0x01010101, 0xfefefefe, 0xfefefefe, + 0x01010101, 0x01010101, 0xfefefefe, 0xfefefefe, + 0x01010101, 0x01010101, 0x01010101, 0x01010101, + 0xfefefefe, 0xfefefefe, 0x01010101, 0x01010101, + 0xfefefefe, 0xfefefefe, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x01010101, 0x01010101, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xfefefefe, 0xfefefefe, + 0xfefefefe, 0xfefefefe, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xfefefefe, 0xfefefefe, 0x00000000, 0x00000000, + 0xfefefefe, 0xfefefefe, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x01010101, 0x01010101, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x01010101, 0x01010101, 0x00000000, 0x00000000, + 0x01010101, 0x01010101, 0xffffffff, 0xffffffff, + 0xfefefefe, 0xfefefefe, 0xfefefefe, 0xfefefefe + }, + { + 0x02020202, 0x02020202, 0x00000000, 0x00000000, + 0x02020202, 0x02020202, 0xffffffff, 0xffffffff, + 0xfdfdfdfd, 0xfdfdfdfd, 0xfdfdfdfd, 0xfdfdfdfd, + 0x02020202, 0x02020202, 0xfdfdfdfd, 0xfdfdfdfd, + 0x02020202, 0x02020202, 0xfdfdfdfd, 0xfdfdfdfd, + 0x02020202, 0x02020202, 0x02020202, 0x02020202, + 0xfdfdfdfd, 0xfdfdfdfd, 0x02020202, 0x02020202, + 0xfdfdfdfd, 0xfdfdfdfd, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x02020202, 0x02020202, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xfdfdfdfd, 0xfdfdfdfd, + 0xfdfdfdfd, 0xfdfdfdfd, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xfdfdfdfd, 0xfdfdfdfd, 0x00000000, 0x00000000, + 0xfdfdfdfd, 0xfdfdfdfd, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x02020202, 0x02020202, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x02020202, 0x02020202, 0x00000000, 0x00000000, + 0x02020202, 0x02020202, 0xffffffff, 0xffffffff, + 0xfdfdfdfd, 0xfdfdfdfd, 0xfdfdfdfd, 0xfdfdfdfd + }, + { + 0x04040404, 0x04040404, 0x00000000, 0x00000000, + 0x04040404, 0x04040404, 0xffffffff, 0xffffffff, + 0xfbfbfbfb, 0xfbfbfbfb, 0xfbfbfbfb, 0xfbfbfbfb, + 0x04040404, 0x04040404, 0xfbfbfbfb, 0xfbfbfbfb, + 0x04040404, 0x04040404, 0xfbfbfbfb, 0xfbfbfbfb, + 0x04040404, 0x04040404, 0x04040404, 0x04040404, + 0xfbfbfbfb, 0xfbfbfbfb, 0x04040404, 0x04040404, + 0xfbfbfbfb, 0xfbfbfbfb, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x04040404, 0x04040404, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xfbfbfbfb, 0xfbfbfbfb, + 0xfbfbfbfb, 0xfbfbfbfb, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xfbfbfbfb, 0xfbfbfbfb, 0x00000000, 0x00000000, + 0xfbfbfbfb, 0xfbfbfbfb, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x04040404, 0x04040404, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x04040404, 0x04040404, 0x00000000, 0x00000000, + 0x04040404, 0x04040404, 0xffffffff, 0xffffffff, + 0xfbfbfbfb, 0xfbfbfbfb, 0xfbfbfbfb, 0xfbfbfbfb + }, + { + 0x08080808, 0x08080808, 0x00000000, 0x00000000, + 0x08080808, 0x08080808, 0xffffffff, 0xffffffff, + 0xf7f7f7f7, 0xf7f7f7f7, 0xf7f7f7f7, 0xf7f7f7f7, + 0x08080808, 0x08080808, 0xf7f7f7f7, 0xf7f7f7f7, + 0x08080808, 0x08080808, 0xf7f7f7f7, 0xf7f7f7f7, + 0x08080808, 0x08080808, 0x08080808, 0x08080808, + 0xf7f7f7f7, 0xf7f7f7f7, 0x08080808, 0x08080808, + 0xf7f7f7f7, 0xf7f7f7f7, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x08080808, 0x08080808, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xf7f7f7f7, 0xf7f7f7f7, + 0xf7f7f7f7, 0xf7f7f7f7, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xf7f7f7f7, 0xf7f7f7f7, 0x00000000, 0x00000000, + 0xf7f7f7f7, 0xf7f7f7f7, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x08080808, 0x08080808, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x08080808, 0x08080808, 0x00000000, 0x00000000, + 0x08080808, 0x08080808, 0xffffffff, 0xffffffff, + 0xf7f7f7f7, 0xf7f7f7f7, 0xf7f7f7f7, 0xf7f7f7f7 + }, + { + 0x10101010, 0x10101010, 0x00000000, 0x00000000, + 0x10101010, 0x10101010, 0xffffffff, 0xffffffff, + 0xefefefef, 0xefefefef, 0xefefefef, 0xefefefef, + 0x10101010, 0x10101010, 0xefefefef, 0xefefefef, + 0x10101010, 0x10101010, 0xefefefef, 0xefefefef, + 0x10101010, 0x10101010, 0x10101010, 0x10101010, + 0xefefefef, 0xefefefef, 0x10101010, 0x10101010, + 0xefefefef, 0xefefefef, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x10101010, 0x10101010, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xefefefef, 0xefefefef, + 0xefefefef, 0xefefefef, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xefefefef, 0xefefefef, 0x00000000, 0x00000000, + 0xefefefef, 0xefefefef, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x10101010, 0x10101010, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x10101010, 0x10101010, 0x00000000, 0x00000000, + 0x10101010, 0x10101010, 0xffffffff, 0xffffffff, + 0xefefefef, 0xefefefef, 0xefefefef, 0xefefefef + }, + { + 0x20202020, 0x20202020, 0x00000000, 0x00000000, + 0x20202020, 0x20202020, 0xffffffff, 0xffffffff, + 0xdfdfdfdf, 0xdfdfdfdf, 0xdfdfdfdf, 0xdfdfdfdf, + 0x20202020, 0x20202020, 0xdfdfdfdf, 0xdfdfdfdf, + 0x20202020, 0x20202020, 0xdfdfdfdf, 0xdfdfdfdf, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0xdfdfdfdf, 0xdfdfdfdf, 0x20202020, 0x20202020, + 0xdfdfdfdf, 0xdfdfdfdf, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x20202020, 0x20202020, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xdfdfdfdf, 0xdfdfdfdf, + 0xdfdfdfdf, 0xdfdfdfdf, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xdfdfdfdf, 0xdfdfdfdf, 0x00000000, 0x00000000, + 0xdfdfdfdf, 0xdfdfdfdf, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x20202020, 0x20202020, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x20202020, 0x20202020, 0x00000000, 0x00000000, + 0x20202020, 0x20202020, 0xffffffff, 0xffffffff, + 0xdfdfdfdf, 0xdfdfdfdf, 0xdfdfdfdf, 0xdfdfdfdf + }, + { + 0x40404040, 0x40404040, 0x00000000, 0x00000000, + 0x40404040, 0x40404040, 0xffffffff, 0xffffffff, + 0xbfbfbfbf, 0xbfbfbfbf, 0xbfbfbfbf, 0xbfbfbfbf, + 0x40404040, 0x40404040, 0xbfbfbfbf, 0xbfbfbfbf, + 0x40404040, 0x40404040, 0xbfbfbfbf, 0xbfbfbfbf, + 0x40404040, 0x40404040, 0x40404040, 0x40404040, + 0xbfbfbfbf, 0xbfbfbfbf, 0x40404040, 0x40404040, + 0xbfbfbfbf, 0xbfbfbfbf, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x40404040, 0x40404040, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xbfbfbfbf, 0xbfbfbfbf, + 0xbfbfbfbf, 0xbfbfbfbf, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xbfbfbfbf, 0xbfbfbfbf, 0x00000000, 0x00000000, + 0xbfbfbfbf, 0xbfbfbfbf, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x40404040, 0x40404040, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x40404040, 0x40404040, 0x00000000, 0x00000000, + 0x40404040, 0x40404040, 0xffffffff, 0xffffffff, + 0xbfbfbfbf, 0xbfbfbfbf, 0xbfbfbfbf, 0xbfbfbfbf + }, + { + 0x80808080, 0x80808080, 0x00000000, 0x00000000, + 0x80808080, 0x80808080, 0xffffffff, 0xffffffff, + 0x7f7f7f7f, 0x7f7f7f7f, 0x7f7f7f7f, 0x7f7f7f7f, + 0x80808080, 0x80808080, 0x7f7f7f7f, 0x7f7f7f7f, + 0x80808080, 0x80808080, 0x7f7f7f7f, 0x7f7f7f7f, + 0x80808080, 0x80808080, 0x80808080, 0x80808080, + 0x7f7f7f7f, 0x7f7f7f7f, 0x80808080, 0x80808080, + 0x7f7f7f7f, 0x7f7f7f7f, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x80808080, 0x80808080, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x7f7f7f7f, 0x7f7f7f7f, + 0x7f7f7f7f, 0x7f7f7f7f, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x7f7f7f7f, 0x7f7f7f7f, 0x00000000, 0x00000000, + 0x7f7f7f7f, 0x7f7f7f7f, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x80808080, 0x80808080, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x80808080, 0x80808080, 0x00000000, 0x00000000, + 0x80808080, 0x80808080, 0xffffffff, 0xffffffff, + 0x7f7f7f7f, 0x7f7f7f7f, 0x7f7f7f7f, 0x7f7f7f7f + } +}; + +u32 special_pattern[DQ_NUM][LEN_SPECIAL_PATTERN] __aligned(32) = { + { + 0x00000000, 0x00000000, 0x01010101, 0x01010101, + 0xffffffff, 0xffffffff, 0xfefefefe, 0xfefefefe, + 0xfefefefe, 0xfefefefe, 0x01010101, 0x01010101, + 0xfefefefe, 0xfefefefe, 0x01010101, 0x01010101, + 0xfefefefe, 0xfefefefe, 0x01010101, 0x01010101, + 0x01010101, 0x01010101, 0xfefefefe, 0xfefefefe, + 0x01010101, 0x01010101, 0xfefefefe, 0xfefefefe, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x01010101, 0x01010101, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xfefefefe, 0xfefefefe, 0xfefefefe, 0xfefefefe, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xfefefefe, 0xfefefefe, + 0x00000000, 0x00000000, 0xfefefefe, 0xfefefefe, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x01010101, 0x01010101, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x01010101, 0x01010101, + 0x00000000, 0x00000000, 0x01010101, 0x01010101, + 0xffffffff, 0xffffffff, 0xfefefefe, 0xfefefefe, + 0xfefefefe, 0xfefefefe, 0x00000000, 0x00000000 + }, + { + 0x00000000, 0x00000000, 0x02020202, 0x02020202, + 0xffffffff, 0xffffffff, 0xfdfdfdfd, 0xfdfdfdfd, + 0xfdfdfdfd, 0xfdfdfdfd, 0x02020202, 0x02020202, + 0xfdfdfdfd, 0xfdfdfdfd, 0x02020202, 0x02020202, + 0xfdfdfdfd, 0xfdfdfdfd, 0x02020202, 0x02020202, + 0x02020202, 0x02020202, 0xfdfdfdfd, 0xfdfdfdfd, + 0x02020202, 0x02020202, 0xfdfdfdfd, 0xfdfdfdfd, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x02020202, 0x02020202, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xfdfdfdfd, 0xfdfdfdfd, 0xfdfdfdfd, 0xfdfdfdfd, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xfdfdfdfd, 0xfdfdfdfd, + 0x00000000, 0x00000000, 0xfdfdfdfd, 0xfdfdfdfd, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x02020202, 0x02020202, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x02020202, 0x02020202, + 0x00000000, 0x00000000, 0x02020202, 0x02020202, + 0xffffffff, 0xffffffff, 0xfdfdfdfd, 0xfdfdfdfd, + 0xfdfdfdfd, 0xfdfdfdfd, 0x00000000, 0x00000000 + }, + { + 0x00000000, 0x00000000, 0x04040404, 0x04040404, + 0xffffffff, 0xffffffff, 0xfbfbfbfb, 0xfbfbfbfb, + 0xfbfbfbfb, 0xfbfbfbfb, 0x04040404, 0x04040404, + 0xfbfbfbfb, 0xfbfbfbfb, 0x04040404, 0x04040404, + 0xfbfbfbfb, 0xfbfbfbfb, 0x04040404, 0x04040404, + 0x04040404, 0x04040404, 0xfbfbfbfb, 0xfbfbfbfb, + 0x04040404, 0x04040404, 0xfbfbfbfb, 0xfbfbfbfb, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x04040404, 0x04040404, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xfbfbfbfb, 0xfbfbfbfb, 0xfbfbfbfb, 0xfbfbfbfb, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xfbfbfbfb, 0xfbfbfbfb, + 0x00000000, 0x00000000, 0xfbfbfbfb, 0xfbfbfbfb, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x04040404, 0x04040404, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x04040404, 0x04040404, + 0x00000000, 0x00000000, 0x04040404, 0x04040404, + 0xffffffff, 0xffffffff, 0xfbfbfbfb, 0xfbfbfbfb, + 0xfbfbfbfb, 0xfbfbfbfb, 0x00000000, 0x00000000 + }, + { + 0x00000000, 0x00000000, 0x08080808, 0x08080808, + 0xffffffff, 0xffffffff, 0xf7f7f7f7, 0xf7f7f7f7, + 0xf7f7f7f7, 0xf7f7f7f7, 0x08080808, 0x08080808, + 0xf7f7f7f7, 0xf7f7f7f7, 0x08080808, 0x08080808, + 0xf7f7f7f7, 0xf7f7f7f7, 0x08080808, 0x08080808, + 0x08080808, 0x08080808, 0xf7f7f7f7, 0xf7f7f7f7, + 0x08080808, 0x08080808, 0xf7f7f7f7, 0xf7f7f7f7, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x08080808, 0x08080808, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xf7f7f7f7, 0xf7f7f7f7, 0xf7f7f7f7, 0xf7f7f7f7, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xf7f7f7f7, 0xf7f7f7f7, + 0x00000000, 0x00000000, 0xf7f7f7f7, 0xf7f7f7f7, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x08080808, 0x08080808, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x08080808, 0x08080808, + 0x00000000, 0x00000000, 0x08080808, 0x08080808, + 0xffffffff, 0xffffffff, 0xf7f7f7f7, 0xf7f7f7f7, + 0xf7f7f7f7, 0xf7f7f7f7, 0x00000000, 0x00000000 + }, + { + 0x00000000, 0x00000000, 0x10101010, 0x10101010, + 0xffffffff, 0xffffffff, 0xefefefef, 0xefefefef, + 0xefefefef, 0xefefefef, 0x10101010, 0x10101010, + 0xefefefef, 0xefefefef, 0x10101010, 0x10101010, + 0xefefefef, 0xefefefef, 0x10101010, 0x10101010, + 0x10101010, 0x10101010, 0xefefefef, 0xefefefef, + 0x10101010, 0x10101010, 0xefefefef, 0xefefefef, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x10101010, 0x10101010, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xefefefef, 0xefefefef, 0xefefefef, 0xefefefef, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xefefefef, 0xefefefef, + 0x00000000, 0x00000000, 0xefefefef, 0xefefefef, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x10101010, 0x10101010, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x10101010, 0x10101010, + 0x00000000, 0x00000000, 0x10101010, 0x10101010, + 0xffffffff, 0xffffffff, 0xefefefef, 0xefefefef, + 0xefefefef, 0xefefefef, 0x00000000, 0x00000000 + }, + { + 0x00000000, 0x00000000, 0x20202020, 0x20202020, + 0xffffffff, 0xffffffff, 0xdfdfdfdf, 0xdfdfdfdf, + 0xdfdfdfdf, 0xdfdfdfdf, 0x20202020, 0x20202020, + 0xdfdfdfdf, 0xdfdfdfdf, 0x20202020, 0x20202020, + 0xdfdfdfdf, 0xdfdfdfdf, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0xdfdfdfdf, 0xdfdfdfdf, + 0x20202020, 0x20202020, 0xdfdfdfdf, 0xdfdfdfdf, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x20202020, 0x20202020, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xdfdfdfdf, 0xdfdfdfdf, 0xdfdfdfdf, 0xdfdfdfdf, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xdfdfdfdf, 0xdfdfdfdf, + 0x00000000, 0x00000000, 0xdfdfdfdf, 0xdfdfdfdf, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x20202020, 0x20202020, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x20202020, 0x20202020, + 0x00000000, 0x00000000, 0x20202020, 0x20202020, + 0xffffffff, 0xffffffff, 0xdfdfdfdf, 0xdfdfdfdf, + 0xdfdfdfdf, 0xdfdfdfdf, 0x00000000, 0x00000000 + }, + { + 0x00000000, 0x00000000, 0x40404040, 0x40404040, + 0xffffffff, 0xffffffff, 0xbfbfbfbf, 0xbfbfbfbf, + 0xbfbfbfbf, 0xbfbfbfbf, 0x40404040, 0x40404040, + 0xbfbfbfbf, 0xbfbfbfbf, 0x40404040, 0x40404040, + 0xbfbfbfbf, 0xbfbfbfbf, 0x40404040, 0x40404040, + 0x40404040, 0x40404040, 0xbfbfbfbf, 0xbfbfbfbf, + 0x40404040, 0x40404040, 0xbfbfbfbf, 0xbfbfbfbf, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x40404040, 0x40404040, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xbfbfbfbf, 0xbfbfbfbf, 0xbfbfbfbf, 0xbfbfbfbf, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xbfbfbfbf, 0xbfbfbfbf, + 0x00000000, 0x00000000, 0xbfbfbfbf, 0xbfbfbfbf, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x40404040, 0x40404040, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x40404040, 0x40404040, + 0x00000000, 0x00000000, 0x40404040, 0x40404040, + 0xffffffff, 0xffffffff, 0xbfbfbfbf, 0xbfbfbfbf, + 0xbfbfbfbf, 0xbfbfbfbf, 0x00000000, 0x00000000 + }, + { + 0x00000000, 0x00000000, 0x80808080, 0x80808080, + 0xffffffff, 0xffffffff, 0x7f7f7f7f, 0x7f7f7f7f, + 0x7f7f7f7f, 0x7f7f7f7f, 0x80808080, 0x80808080, + 0x7f7f7f7f, 0x7f7f7f7f, 0x80808080, 0x80808080, + 0x7f7f7f7f, 0x7f7f7f7f, 0x80808080, 0x80808080, + 0x80808080, 0x80808080, 0x7f7f7f7f, 0x7f7f7f7f, + 0x80808080, 0x80808080, 0x7f7f7f7f, 0x7f7f7f7f, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x80808080, 0x80808080, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x7f7f7f7f, 0x7f7f7f7f, 0x7f7f7f7f, 0x7f7f7f7f, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0x7f7f7f7f, 0x7f7f7f7f, + 0x00000000, 0x00000000, 0x7f7f7f7f, 0x7f7f7f7f, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x80808080, 0x80808080, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0x80808080, 0x80808080, + 0x00000000, 0x00000000, 0x80808080, 0x80808080, + 0xffffffff, 0xffffffff, 0x7f7f7f7f, 0x7f7f7f7f, + 0x7f7f7f7f, 0x7f7f7f7f, 0x00000000, 0x00000000 + } +}; + +/* Fabric ratios table */ +u32 fabric_ratio[FAB_OPT] = { + 0x04010204, + 0x04020202, + 0x08020306, + 0x08020303, + 0x04020303, + 0x04020204, + 0x04010202, + 0x08030606, + 0x08030505, + 0x04020306, + 0x0804050a, + 0x04030606, + 0x04020404, + 0x04030306, + 0x04020505, + 0x08020505, + 0x04010303, + 0x08050a0a, + 0x04030408, + 0x04010102, + 0x08030306 +}; + +u32 pbs_dq_mapping[PUP_NUM_64BIT + 1][DQ_NUM] = { + {3, 2, 5, 7, 1, 0, 6, 4}, + {2, 3, 6, 7, 1, 0, 4, 5}, + {1, 3, 5, 6, 0, 2, 4, 7}, + {0, 2, 4, 7, 1, 3, 5, 6}, + {3, 0, 4, 6, 1, 2, 5, 7}, + {0, 3, 5, 7, 1, 2, 4, 6}, + {2, 3, 5, 7, 1, 0, 4, 6}, + {0, 2, 5, 4, 1, 3, 6, 7}, + {2, 3, 4, 7, 0, 1, 5, 6} +}; + +#endif /* __DDR3_PATTERNS_64_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_topology_def.h b/drivers/ddr/marvell/a38x/ddr3_topology_def.h new file mode 100644 index 0000000..64a0447 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_topology_def.h @@ -0,0 +1,76 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_TOPOLOGY_DEF_H +#define _DDR3_TOPOLOGY_DEF_H + +/* TOPOLOGY */ + +enum hws_speed_bin { + SPEED_BIN_DDR_800D, + SPEED_BIN_DDR_800E, + SPEED_BIN_DDR_1066E, + SPEED_BIN_DDR_1066F, + SPEED_BIN_DDR_1066G, + SPEED_BIN_DDR_1333F, + SPEED_BIN_DDR_1333G, + SPEED_BIN_DDR_1333H, + SPEED_BIN_DDR_1333J, + SPEED_BIN_DDR_1600G, + SPEED_BIN_DDR_1600H, + SPEED_BIN_DDR_1600J, + SPEED_BIN_DDR_1600K, + SPEED_BIN_DDR_1866J, + SPEED_BIN_DDR_1866K, + SPEED_BIN_DDR_1866L, + SPEED_BIN_DDR_1866M, + SPEED_BIN_DDR_2133K, + SPEED_BIN_DDR_2133L, + SPEED_BIN_DDR_2133M, + SPEED_BIN_DDR_2133N, + + SPEED_BIN_DDR_1333H_EXT, + SPEED_BIN_DDR_1600K_EXT, + SPEED_BIN_DDR_1866M_EXT +}; + +enum hws_ddr_freq { + DDR_FREQ_LOW_FREQ, + DDR_FREQ_400, + DDR_FREQ_533, + DDR_FREQ_667, + DDR_FREQ_800, + DDR_FREQ_933, + DDR_FREQ_1066, + DDR_FREQ_311, + DDR_FREQ_333, + DDR_FREQ_467, + DDR_FREQ_850, + DDR_FREQ_600, + DDR_FREQ_300, + DDR_FREQ_900, + DDR_FREQ_360, + DDR_FREQ_1000, + DDR_FREQ_LIMIT +}; + +enum speed_bin_table_elements { + SPEED_BIN_TRCD, + SPEED_BIN_TRP, + SPEED_BIN_TRAS, + SPEED_BIN_TRC, + SPEED_BIN_TRRD1K, + SPEED_BIN_TRRD2K, + SPEED_BIN_TPD, + SPEED_BIN_TFAW1K, + SPEED_BIN_TFAW2K, + SPEED_BIN_TWTR, + SPEED_BIN_TRTP, + SPEED_BIN_TWR, + SPEED_BIN_TMOD +}; + +#endif /* _DDR3_TOPOLOGY_DEF_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training.c b/drivers/ddr/marvell/a38x/ddr3_training.c new file mode 100644 index 0000000..80ef050 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training.c @@ -0,0 +1,2644 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +#define GET_MAX_VALUE(x, y) \ + ((x) > (y)) ? (x) : (y) +#define CEIL_DIVIDE(x, y) \ + ((x - (x / y) * y) == 0) ? ((x / y) - 1) : (x / y) + +#define TIME_2_CLOCK_CYCLES CEIL_DIVIDE + +#define GET_CS_FROM_MASK(mask) (cs_mask2_num[mask]) +#define CS_CBE_VALUE(cs_num) (cs_cbe_reg[cs_num]) + +u32 window_mem_addr = 0; +u32 phy_reg0_val = 0; +u32 phy_reg1_val = 8; +u32 phy_reg2_val = 0; +u32 phy_reg3_val = 0xa; +enum hws_ddr_freq init_freq = DDR_FREQ_667; +enum hws_ddr_freq low_freq = DDR_FREQ_LOW_FREQ; +enum hws_ddr_freq medium_freq; +u32 debug_dunit = 0; +u32 odt_additional = 1; +u32 *dq_map_table = NULL; +u32 odt_config = 1; + +#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ALLEYCAT3) || \ + defined(CONFIG_ARMADA_39X) +u32 is_pll_before_init = 0, is_adll_calib_before_init = 0, is_dfs_in_init = 0; +u32 dfs_low_freq = 130; +#else +u32 is_pll_before_init = 0, is_adll_calib_before_init = 1, is_dfs_in_init = 0; +u32 dfs_low_freq = 100; +#endif +u32 g_rtt_nom_c_s0, g_rtt_nom_c_s1; +u8 calibration_update_control; /* 2 external only, 1 is internal only */ + +enum hws_result training_result[MAX_STAGE_LIMIT][MAX_INTERFACE_NUM]; +enum auto_tune_stage training_stage = INIT_CONTROLLER; +u32 finger_test = 0, p_finger_start = 11, p_finger_end = 64, + n_finger_start = 11, n_finger_end = 64, + p_finger_step = 3, n_finger_step = 3; +u32 clamp_tbl[] = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 }; + +/* Initiate to 0xff, this variable is define by user in debug mode */ +u32 mode2_t = 0xff; +u32 xsb_validate_type = 0; +u32 xsb_validation_base_address = 0xf000; +u32 first_active_if = 0; +u32 dfs_low_phy1 = 0x1f; +u32 multicast_id = 0; +int use_broadcast = 0; +struct hws_tip_freq_config_info *freq_info_table = NULL; +u8 is_cbe_required = 0; +u32 debug_mode = 0; +u32 delay_enable = 0; +int rl_mid_freq_wa = 0; + +u32 effective_cs = 0; + +u32 mask_tune_func = (SET_MEDIUM_FREQ_MASK_BIT | + WRITE_LEVELING_MASK_BIT | + LOAD_PATTERN_2_MASK_BIT | + READ_LEVELING_MASK_BIT | + SET_TARGET_FREQ_MASK_BIT | WRITE_LEVELING_TF_MASK_BIT | + READ_LEVELING_TF_MASK_BIT | + CENTRALIZATION_RX_MASK_BIT | CENTRALIZATION_TX_MASK_BIT); + +void ddr3_print_version(void) +{ + printf(DDR3_TIP_VERSION_STRING); +} + +static int ddr3_tip_ddr3_training_main_flow(u32 dev_num); +static int ddr3_tip_write_odt(u32 dev_num, enum hws_access_type access_type, + u32 if_id, u32 cl_value, u32 cwl_value); +static int ddr3_tip_ddr3_auto_tune(u32 dev_num); +static int is_bus_access_done(u32 dev_num, u32 if_id, + u32 dunit_reg_adrr, u32 bit); +#ifdef ODT_TEST_SUPPORT +static int odt_test(u32 dev_num, enum hws_algo_type algo_type); +#endif + +int adll_calibration(u32 dev_num, enum hws_access_type access_type, + u32 if_id, enum hws_ddr_freq frequency); +static int ddr3_tip_set_timing(u32 dev_num, enum hws_access_type access_type, + u32 if_id, enum hws_ddr_freq frequency); + +static struct page_element page_param[] = { + /* + * 8bits 16 bits + * page-size(K) page-size(K) mask + */ + { 1, 2, 2}, + /* 512M */ + { 1, 2, 3}, + /* 1G */ + { 1, 2, 0}, + /* 2G */ + { 1, 2, 4}, + /* 4G */ + { 2, 2, 5} + /* 8G */ +}; + +static u8 mem_size_config[MEM_SIZE_LAST] = { + 0x2, /* 512Mbit */ + 0x3, /* 1Gbit */ + 0x0, /* 2Gbit */ + 0x4, /* 4Gbit */ + 0x5 /* 8Gbit */ +}; + +static u8 cs_mask2_num[] = { 0, 0, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 }; + +static struct reg_data odpg_default_value[] = { + {0x1034, 0x38000, MASK_ALL_BITS}, + {0x1038, 0x0, MASK_ALL_BITS}, + {0x10b0, 0x0, MASK_ALL_BITS}, + {0x10b8, 0x0, MASK_ALL_BITS}, + {0x10c0, 0x0, MASK_ALL_BITS}, + {0x10f0, 0x0, MASK_ALL_BITS}, + {0x10f4, 0x0, MASK_ALL_BITS}, + {0x10f8, 0xff, MASK_ALL_BITS}, + {0x10fc, 0xffff, MASK_ALL_BITS}, + {0x1130, 0x0, MASK_ALL_BITS}, + {0x1830, 0x2000000, MASK_ALL_BITS}, + {0x14d0, 0x0, MASK_ALL_BITS}, + {0x14d4, 0x0, MASK_ALL_BITS}, + {0x14d8, 0x0, MASK_ALL_BITS}, + {0x14dc, 0x0, MASK_ALL_BITS}, + {0x1454, 0x0, MASK_ALL_BITS}, + {0x1594, 0x0, MASK_ALL_BITS}, + {0x1598, 0x0, MASK_ALL_BITS}, + {0x159c, 0x0, MASK_ALL_BITS}, + {0x15a0, 0x0, MASK_ALL_BITS}, + {0x15a4, 0x0, MASK_ALL_BITS}, + {0x15a8, 0x0, MASK_ALL_BITS}, + {0x15ac, 0x0, MASK_ALL_BITS}, + {0x1604, 0x0, MASK_ALL_BITS}, + {0x1608, 0x0, MASK_ALL_BITS}, + {0x160c, 0x0, MASK_ALL_BITS}, + {0x1610, 0x0, MASK_ALL_BITS}, + {0x1614, 0x0, MASK_ALL_BITS}, + {0x1618, 0x0, MASK_ALL_BITS}, + {0x1624, 0x0, MASK_ALL_BITS}, + {0x1690, 0x0, MASK_ALL_BITS}, + {0x1694, 0x0, MASK_ALL_BITS}, + {0x1698, 0x0, MASK_ALL_BITS}, + {0x169c, 0x0, MASK_ALL_BITS}, + {0x14b8, 0x6f67, MASK_ALL_BITS}, + {0x1630, 0x0, MASK_ALL_BITS}, + {0x1634, 0x0, MASK_ALL_BITS}, + {0x1638, 0x0, MASK_ALL_BITS}, + {0x163c, 0x0, MASK_ALL_BITS}, + {0x16b0, 0x0, MASK_ALL_BITS}, + {0x16b4, 0x0, MASK_ALL_BITS}, + {0x16b8, 0x0, MASK_ALL_BITS}, + {0x16bc, 0x0, MASK_ALL_BITS}, + {0x16c0, 0x0, MASK_ALL_BITS}, + {0x16c4, 0x0, MASK_ALL_BITS}, + {0x16c8, 0x0, MASK_ALL_BITS}, + {0x16cc, 0x1, MASK_ALL_BITS}, + {0x16f0, 0x1, MASK_ALL_BITS}, + {0x16f4, 0x0, MASK_ALL_BITS}, + {0x16f8, 0x0, MASK_ALL_BITS}, + {0x16fc, 0x0, MASK_ALL_BITS} +}; + +static int ddr3_tip_bus_access(u32 dev_num, enum hws_access_type interface_access, + u32 if_id, enum hws_access_type phy_access, + u32 phy_id, enum hws_ddr_phy phy_type, u32 reg_addr, + u32 data_value, enum hws_operation oper_type); +static int ddr3_tip_pad_inv(u32 dev_num, u32 if_id); +static int ddr3_tip_rank_control(u32 dev_num, u32 if_id); + +/* + * Update global training parameters by data from user + */ +int ddr3_tip_tune_training_params(u32 dev_num, + struct tune_train_params *params) +{ + if (params->ck_delay != -1) + ck_delay = params->ck_delay; + if (params->ck_delay_16 != -1) + ck_delay_16 = params->ck_delay_16; + if (params->phy_reg3_val != -1) + phy_reg3_val = params->phy_reg3_val; + + return MV_OK; +} + +/* + * Configure CS + */ +int ddr3_tip_configure_cs(u32 dev_num, u32 if_id, u32 cs_num, u32 enable) +{ + u32 data, addr_hi, data_high; + u32 mem_index; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (enable == 1) { + data = (tm->interface_params[if_id].bus_width == + BUS_WIDTH_8) ? 0 : 1; + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + SDRAM_ACCESS_CONTROL_REG, (data << (cs_num * 4)), + 0x3 << (cs_num * 4))); + mem_index = tm->interface_params[if_id].memory_size; + + addr_hi = mem_size_config[mem_index] & 0x3; + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + SDRAM_ACCESS_CONTROL_REG, + (addr_hi << (2 + cs_num * 4)), + 0x3 << (2 + cs_num * 4))); + + data_high = (mem_size_config[mem_index] & 0x4) >> 2; + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + SDRAM_ACCESS_CONTROL_REG, + data_high << (20 + cs_num), 1 << (20 + cs_num))); + + /* Enable Address Select Mode */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + SDRAM_ACCESS_CONTROL_REG, 1 << (16 + cs_num), + 1 << (16 + cs_num))); + } + switch (cs_num) { + case 0: + case 1: + case 2: + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + DDR_CONTROL_LOW_REG, (enable << (cs_num + 11)), + 1 << (cs_num + 11))); + break; + case 3: + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + DDR_CONTROL_LOW_REG, (enable << 15), 1 << 15)); + break; + } + + return MV_OK; +} + +/* + * Calculate number of CS + */ +static int calc_cs_num(u32 dev_num, u32 if_id, u32 *cs_num) +{ + u32 cs; + u32 bus_cnt; + u32 cs_count; + u32 cs_bitmask; + u32 curr_cs_num = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (bus_cnt = 0; bus_cnt < GET_TOPOLOGY_NUM_OF_BUSES(); bus_cnt++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_cnt); + cs_count = 0; + cs_bitmask = tm->interface_params[if_id]. + as_bus_params[bus_cnt].cs_bitmask; + for (cs = 0; cs < MAX_CS_NUM; cs++) { + if ((cs_bitmask >> cs) & 1) + cs_count++; + } + + if (curr_cs_num == 0) { + curr_cs_num = cs_count; + } else if (cs_count != curr_cs_num) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("CS number is different per bus (IF %d BUS %d cs_num %d curr_cs_num %d)\n", + if_id, bus_cnt, cs_count, + curr_cs_num)); + return MV_NOT_SUPPORTED; + } + } + *cs_num = curr_cs_num; + + return MV_OK; +} + +/* + * Init Controller Flow + */ +int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_prm) +{ + u32 if_id; + u32 cs_num; + u32 t_refi = 0, t_hclk = 0, t_ckclk = 0, t_faw = 0, t_pd = 0, + t_wr = 0, t2t = 0, txpdll = 0; + u32 data_value = 0, bus_width = 0, page_size = 0, cs_cnt = 0, + mem_mask = 0, bus_index = 0; + enum hws_speed_bin speed_bin_index = SPEED_BIN_DDR_2133N; + enum hws_mem_size memory_size = MEM_2G; + enum hws_ddr_freq freq = init_freq; + u32 cs_mask = 0; + u32 cl_value = 0, cwl_val = 0; + u32 refresh_interval_cnt = 0, bus_cnt = 0, adll_tap = 0; + enum hws_access_type access_type = ACCESS_TYPE_UNICAST; + u32 data_read[MAX_INTERFACE_NUM]; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, + ("Init_controller, do_mrs_phy=%d, is_ctrl64_bit=%d\n", + init_cntr_prm->do_mrs_phy, + init_cntr_prm->is_ctrl64_bit)); + + if (init_cntr_prm->init_phy == 1) { + CHECK_STATUS(ddr3_tip_configure_phy(dev_num)); + } + + if (generic_init_controller == 1) { + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, + ("active IF %d\n", if_id)); + mem_mask = 0; + for (bus_index = 0; + bus_index < GET_TOPOLOGY_NUM_OF_BUSES(); + bus_index++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_index); + mem_mask |= + tm->interface_params[if_id]. + as_bus_params[bus_index].mirror_enable_bitmask; + } + + if (mem_mask != 0) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, + if_id, CS_ENABLE_REG, 0, + 0x8)); + } + + memory_size = + tm->interface_params[if_id]. + memory_size; + speed_bin_index = + tm->interface_params[if_id]. + speed_bin_index; + freq = init_freq; + t_refi = + (tm->interface_params[if_id]. + interface_temp == + HWS_TEMP_HIGH) ? TREFI_HIGH : TREFI_LOW; + t_refi *= 1000; /* psec */ + DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, + ("memy_size %d speed_bin_ind %d freq %d t_refi %d\n", + memory_size, speed_bin_index, freq, + t_refi)); + /* HCLK & CK CLK in 2:1[ps] */ + /* t_ckclk is external clock */ + t_ckclk = (MEGA / freq_val[freq]); + /* t_hclk is internal clock */ + t_hclk = 2 * t_ckclk; + refresh_interval_cnt = t_refi / t_hclk; /* no units */ + bus_width = + (DDR3_IS_16BIT_DRAM_MODE(tm->bus_act_mask) + == 1) ? (16) : (32); + + if (init_cntr_prm->is_ctrl64_bit) + bus_width = 64; + + data_value = + (refresh_interval_cnt | 0x4000 | + ((bus_width == + 32) ? 0x8000 : 0) | 0x1000000) & ~(1 << 26); + + /* Interface Bus Width */ + /* SRMode */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + SDRAM_CONFIGURATION_REG, data_value, + 0x100ffff)); + + /* Interleave first command pre-charge enable (TBD) */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + SDRAM_OPEN_PAGE_CONTROL_REG, (1 << 10), + (1 << 10))); + + /* PHY configuration */ + /* + * Postamble Length = 1.5cc, Addresscntl to clk skew + * \BD, Preamble length normal, parralal ADLL enable + */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DRAM_PHY_CONFIGURATION, 0x28, 0x3e)); + if (init_cntr_prm->is_ctrl64_bit) { + /* positive edge */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DRAM_PHY_CONFIGURATION, 0x0, + 0xff80)); + } + + /* calibration block disable */ + /* Xbar Read buffer select (for Internal access) */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + CALIB_MACHINE_CTRL_REG, 0x1200c, + 0x7dffe01c)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + CALIB_MACHINE_CTRL_REG, + calibration_update_control << 3, 0x3 << 3)); + + /* Pad calibration control - enable */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + CALIB_MACHINE_CTRL_REG, 0x1, 0x1)); + + cs_mask = 0; + data_value = 0x7; + /* + * Address ctrl \96 Part of the Generic code + * The next configuration is done: + * 1) Memory Size + * 2) Bus_width + * 3) CS# + * 4) Page Number + * 5) t_faw + * Per Dunit get from the Map_topology the parameters: + * Bus_width + * t_faw is per Dunit not per CS + */ + page_size = + (tm->interface_params[if_id]. + bus_width == + BUS_WIDTH_8) ? page_param[memory_size]. + page_size_8bit : page_param[memory_size]. + page_size_16bit; + + t_faw = + (page_size == 1) ? speed_bin_table(speed_bin_index, + SPEED_BIN_TFAW1K) + : speed_bin_table(speed_bin_index, + SPEED_BIN_TFAW2K); + + data_value = TIME_2_CLOCK_CYCLES(t_faw, t_ckclk); + data_value = data_value << 24; + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + SDRAM_ACCESS_CONTROL_REG, data_value, + 0x7f000000)); + + data_value = + (tm->interface_params[if_id]. + bus_width == BUS_WIDTH_8) ? 0 : 1; + + /* create merge cs mask for all cs available in dunit */ + for (bus_cnt = 0; + bus_cnt < GET_TOPOLOGY_NUM_OF_BUSES(); + bus_cnt++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_cnt); + cs_mask |= + tm->interface_params[if_id]. + as_bus_params[bus_cnt].cs_bitmask; + } + DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, + ("Init_controller IF %d cs_mask %d\n", + if_id, cs_mask)); + /* + * Configure the next upon the Map Topology \96 If the + * Dunit is CS0 Configure CS0 if it is multi CS + * configure them both: The Bust_width it\92s the + * Memory Bus width \96 x8 or x16 + */ + for (cs_cnt = 0; cs_cnt < NUM_OF_CS; cs_cnt++) { + ddr3_tip_configure_cs(dev_num, if_id, cs_cnt, + ((cs_mask & (1 << cs_cnt)) ? 1 + : 0)); + } + + if (init_cntr_prm->do_mrs_phy) { + /* + * MR0 \96 Part of the Generic code + * The next configuration is done: + * 1) Burst Length + * 2) CAS Latency + * get for each dunit what is it Speed_bin & + * Target Frequency. From those both parameters + * get the appropriate Cas_l from the CL table + */ + cl_value = + tm->interface_params[if_id]. + cas_l; + cwl_val = + tm->interface_params[if_id]. + cas_wl; + DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, + ("cl_value 0x%x cwl_val 0x%x\n", + cl_value, cwl_val)); + + data_value = + ((cl_mask_table[cl_value] & 0x1) << 2) | + ((cl_mask_table[cl_value] & 0xe) << 3); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + MR0_REG, data_value, + (0x7 << 4) | (1 << 2))); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + MR0_REG, twr_mask_table[t_wr + 1], + 0xe00)); + + /* + * MR1: Set RTT and DIC Design GL values + * configured by user + */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, MR1_REG, + g_dic | g_rtt_nom, 0x266)); + + /* MR2 - Part of the Generic code */ + /* + * The next configuration is done: + * 1) SRT + * 2) CAS Write Latency + */ + data_value = (cwl_mask_table[cwl_val] << 3); + data_value |= + ((tm->interface_params[if_id]. + interface_temp == + HWS_TEMP_HIGH) ? (1 << 7) : 0); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + MR2_REG, data_value, + (0x7 << 3) | (0x1 << 7) | (0x3 << + 9))); + } + + ddr3_tip_write_odt(dev_num, access_type, if_id, + cl_value, cwl_val); + ddr3_tip_set_timing(dev_num, access_type, if_id, freq); + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DUNIT_CONTROL_HIGH_REG, 0x177, + 0x1000177)); + + if (init_cntr_prm->is_ctrl64_bit) { + /* disable 0.25 cc delay */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DUNIT_CONTROL_HIGH_REG, 0x0, + 0x800)); + } + + /* reset bit 7 */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DUNIT_CONTROL_HIGH_REG, + (init_cntr_prm->msys_init << 7), (1 << 7))); + + if (mode2_t != 0xff) { + t2t = mode2_t; + } else { + /* calculate number of CS (per interface) */ + CHECK_STATUS(calc_cs_num + (dev_num, if_id, &cs_num)); + t2t = (cs_num == 1) ? 0 : 1; + } + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DDR_CONTROL_LOW_REG, t2t << 3, + 0x3 << 3)); + /* move the block to ddr3_tip_set_timing - start */ + t_pd = GET_MAX_VALUE(t_ckclk * 3, + speed_bin_table(speed_bin_index, + SPEED_BIN_TPD)); + t_pd = TIME_2_CLOCK_CYCLES(t_pd, t_ckclk); + txpdll = GET_MAX_VALUE(t_ckclk * 10, 24); + txpdll = CEIL_DIVIDE((txpdll - 1), t_ckclk); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DDR_TIMING_REG, txpdll << 4, + 0x1f << 4)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DDR_TIMING_REG, 0x28 << 9, 0x3f << 9)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DDR_TIMING_REG, 0xa << 21, 0xff << 21)); + + /* move the block to ddr3_tip_set_timing - end */ + /* AUTO_ZQC_TIMING */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + TIMING_REG, (AUTO_ZQC_TIMING | (2 << 20)), + 0x3fffff)); + CHECK_STATUS(ddr3_tip_if_read + (dev_num, access_type, if_id, + DRAM_PHY_CONFIGURATION, data_read, 0x30)); + data_value = + (data_read[if_id] == 0) ? (1 << 11) : 0; + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DUNIT_CONTROL_HIGH_REG, data_value, + (1 << 11))); + + /* Set Active control for ODT write transactions */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, 0x1494, g_odt_config, + MASK_ALL_BITS)); + } + } else { +#ifdef STATIC_ALGO_SUPPORT + CHECK_STATUS(ddr3_tip_static_init_controller(dev_num)); +#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X) + CHECK_STATUS(ddr3_tip_static_phy_init_controller(dev_num)); +#endif +#endif /* STATIC_ALGO_SUPPORT */ + } + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + CHECK_STATUS(ddr3_tip_rank_control(dev_num, if_id)); + + if (init_cntr_prm->do_mrs_phy) { + CHECK_STATUS(ddr3_tip_pad_inv(dev_num, if_id)); + } + + /* Pad calibration control - disable */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + CALIB_MACHINE_CTRL_REG, 0x0, 0x1)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + CALIB_MACHINE_CTRL_REG, + calibration_update_control << 3, 0x3 << 3)); + } + + CHECK_STATUS(ddr3_tip_enable_init_sequence(dev_num)); + + if (delay_enable != 0) { + adll_tap = MEGA / (freq_val[freq] * 64); + ddr3_tip_cmd_addr_init_delay(dev_num, adll_tap); + } + + return MV_OK; +} + +/* + * Load Topology map + */ +int hws_ddr3_tip_load_topology_map(u32 dev_num, struct hws_topology_map *tm) +{ + enum hws_speed_bin speed_bin_index; + enum hws_ddr_freq freq = DDR_FREQ_LIMIT; + u32 if_id; + + freq_val[DDR_FREQ_LOW_FREQ] = dfs_low_freq; + tm = ddr3_get_topology_map(); + CHECK_STATUS(ddr3_tip_get_first_active_if + ((u8)dev_num, tm->if_act_mask, + &first_active_if)); + DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, + ("board IF_Mask=0x%x num_of_bus_per_interface=0x%x\n", + tm->if_act_mask, + tm->num_of_bus_per_interface)); + + /* + * if CL, CWL values are missing in topology map, then fill them + * according to speedbin tables + */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + speed_bin_index = + tm->interface_params[if_id].speed_bin_index; + /* TBD memory frequency of interface 0 only is used ! */ + freq = tm->interface_params[first_active_if].memory_freq; + + DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, + ("speed_bin_index =%d freq=%d cl=%d cwl=%d\n", + speed_bin_index, freq_val[freq], + tm->interface_params[if_id]. + cas_l, + tm->interface_params[if_id]. + cas_wl)); + + if (tm->interface_params[if_id].cas_l == 0) { + tm->interface_params[if_id].cas_l = + cas_latency_table[speed_bin_index].cl_val[freq]; + } + + if (tm->interface_params[if_id].cas_wl == 0) { + tm->interface_params[if_id].cas_wl = + cas_write_latency_table[speed_bin_index].cl_val[freq]; + } + } + + return MV_OK; +} + +/* + * RANK Control Flow + */ +static int ddr3_tip_rank_control(u32 dev_num, u32 if_id) +{ + u32 data_value = 0, bus_cnt; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (bus_cnt = 1; bus_cnt < GET_TOPOLOGY_NUM_OF_BUSES(); bus_cnt++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_cnt); + if ((tm->interface_params[if_id]. + as_bus_params[0].cs_bitmask != + tm->interface_params[if_id]. + as_bus_params[bus_cnt].cs_bitmask) || + (tm->interface_params[if_id]. + as_bus_params[0].mirror_enable_bitmask != + tm->interface_params[if_id]. + as_bus_params[bus_cnt].mirror_enable_bitmask)) + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("WARNING:Wrong configuration for pup #%d CS mask and CS mirroring for all pups should be the same\n", + bus_cnt)); + } + + data_value |= tm->interface_params[if_id]. + as_bus_params[0].cs_bitmask; + data_value |= tm->interface_params[if_id]. + as_bus_params[0].mirror_enable_bitmask << 4; + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, RANK_CTRL_REG, + data_value, 0xff)); + + return MV_OK; +} + +/* + * PAD Inverse Flow + */ +static int ddr3_tip_pad_inv(u32 dev_num, u32 if_id) +{ + u32 bus_cnt, data_value, ck_swap_pup_ctrl; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (bus_cnt = 0; bus_cnt < GET_TOPOLOGY_NUM_OF_BUSES(); bus_cnt++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_cnt); + if (tm->interface_params[if_id]. + as_bus_params[bus_cnt].is_dqs_swap == 1) { + /* dqs swap */ + ddr3_tip_bus_read_modify_write(dev_num, ACCESS_TYPE_UNICAST, + if_id, bus_cnt, + DDR_PHY_DATA, + PHY_CONTROL_PHY_REG, 0xc0, + 0xc0); + } + + if (tm->interface_params[if_id]. + as_bus_params[bus_cnt].is_ck_swap == 1) { + if (bus_cnt <= 1) + data_value = 0x5 << 2; + else + data_value = 0xa << 2; + + /* mask equals data */ + /* ck swap pup is only control pup #0 ! */ + ck_swap_pup_ctrl = 0; + ddr3_tip_bus_read_modify_write(dev_num, ACCESS_TYPE_UNICAST, + if_id, ck_swap_pup_ctrl, + DDR_PHY_CONTROL, + PHY_CONTROL_PHY_REG, + data_value, data_value); + } + } + + return MV_OK; +} + +/* + * Run Training Flow + */ +int hws_ddr3_tip_run_alg(u32 dev_num, enum hws_algo_type algo_type) +{ + int ret = MV_OK, ret_tune = MV_OK; + +#ifdef ODT_TEST_SUPPORT + if (finger_test == 1) + return odt_test(dev_num, algo_type); +#endif + + if (algo_type == ALGO_TYPE_DYNAMIC) { + ret = ddr3_tip_ddr3_auto_tune(dev_num); + } else { +#ifdef STATIC_ALGO_SUPPORT + { + enum hws_ddr_freq freq; + freq = init_freq; + + /* add to mask */ + if (is_adll_calib_before_init != 0) { + printf("with adll calib before init\n"); + adll_calibration(dev_num, ACCESS_TYPE_MULTICAST, + 0, freq); + } + /* + * Frequency per interface is not relevant, + * only interface 0 + */ + ret = ddr3_tip_run_static_alg(dev_num, + freq); + } +#endif + } + + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("Run_alg: tuning failed %d\n", ret_tune)); + } + + return ret; +} + +#ifdef ODT_TEST_SUPPORT +/* + * ODT Test + */ +static int odt_test(u32 dev_num, enum hws_algo_type algo_type) +{ + int ret = MV_OK, ret_tune = MV_OK; + int pfinger_val = 0, nfinger_val; + + for (pfinger_val = p_finger_start; pfinger_val <= p_finger_end; + pfinger_val += p_finger_step) { + for (nfinger_val = n_finger_start; nfinger_val <= n_finger_end; + nfinger_val += n_finger_step) { + if (finger_test != 0) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("pfinger_val %d nfinger_val %d\n", + pfinger_val, nfinger_val)); + p_finger = pfinger_val; + n_finger = nfinger_val; + } + + if (algo_type == ALGO_TYPE_DYNAMIC) { + ret = ddr3_tip_ddr3_auto_tune(dev_num); + } else { + /* + * Frequency per interface is not relevant, + * only interface 0 + */ + ret = ddr3_tip_run_static_alg(dev_num, + init_freq); + } + } + } + + if (ret_tune != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("Run_alg: tuning failed %d\n", ret_tune)); + ret = (ret == MV_OK) ? ret_tune : ret; + } + + return ret; +} +#endif + +/* + * Select Controller + */ +int hws_ddr3_tip_select_ddr_controller(u32 dev_num, int enable) +{ + if (config_func_info[dev_num].tip_dunit_mux_select_func != NULL) { + return config_func_info[dev_num]. + tip_dunit_mux_select_func((u8)dev_num, enable); + } + + return MV_FAIL; +} + +/* + * Dunit Register Write + */ +int ddr3_tip_if_write(u32 dev_num, enum hws_access_type interface_access, + u32 if_id, u32 reg_addr, u32 data_value, u32 mask) +{ + if (config_func_info[dev_num].tip_dunit_write_func != NULL) { + return config_func_info[dev_num]. + tip_dunit_write_func((u8)dev_num, interface_access, + if_id, reg_addr, + data_value, mask); + } + + return MV_FAIL; +} + +/* + * Dunit Register Read + */ +int ddr3_tip_if_read(u32 dev_num, enum hws_access_type interface_access, + u32 if_id, u32 reg_addr, u32 *data, u32 mask) +{ + if (config_func_info[dev_num].tip_dunit_read_func != NULL) { + return config_func_info[dev_num]. + tip_dunit_read_func((u8)dev_num, interface_access, + if_id, reg_addr, + data, mask); + } + + return MV_FAIL; +} + +/* + * Dunit Register Polling + */ +int ddr3_tip_if_polling(u32 dev_num, enum hws_access_type access_type, + u32 if_id, u32 exp_value, u32 mask, u32 offset, + u32 poll_tries) +{ + u32 poll_cnt = 0, interface_num = 0, start_if, end_if; + u32 read_data[MAX_INTERFACE_NUM]; + int ret; + int is_fail = 0, is_if_fail; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (access_type == ACCESS_TYPE_MULTICAST) { + start_if = 0; + end_if = MAX_INTERFACE_NUM - 1; + } else { + start_if = if_id; + end_if = if_id; + } + + for (interface_num = start_if; interface_num <= end_if; interface_num++) { + /* polling bit 3 for n times */ + VALIDATE_ACTIVE(tm->if_act_mask, interface_num); + + is_if_fail = 0; + for (poll_cnt = 0; poll_cnt < poll_tries; poll_cnt++) { + ret = + ddr3_tip_if_read(dev_num, ACCESS_TYPE_UNICAST, + interface_num, offset, read_data, + mask); + if (ret != MV_OK) + return ret; + + if (read_data[interface_num] == exp_value) + break; + } + + if (poll_cnt >= poll_tries) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("max poll IF #%d\n", interface_num)); + is_fail = 1; + is_if_fail = 1; + } + + training_result[training_stage][interface_num] = + (is_if_fail == 1) ? TEST_FAILED : TEST_SUCCESS; + } + + return (is_fail == 0) ? MV_OK : MV_FAIL; +} + +/* + * Bus read access + */ +int ddr3_tip_bus_read(u32 dev_num, u32 if_id, + enum hws_access_type phy_access, u32 phy_id, + enum hws_ddr_phy phy_type, u32 reg_addr, u32 *data) +{ + u32 bus_index = 0; + u32 data_read[MAX_INTERFACE_NUM]; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (phy_access == ACCESS_TYPE_MULTICAST) { + for (bus_index = 0; bus_index < GET_TOPOLOGY_NUM_OF_BUSES(); + bus_index++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_index); + CHECK_STATUS(ddr3_tip_bus_access + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, + bus_index, phy_type, reg_addr, 0, + OPERATION_READ)); + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, + PHY_REG_FILE_ACCESS, data_read, + MASK_ALL_BITS)); + data[bus_index] = (data_read[if_id] & 0xffff); + } + } else { + CHECK_STATUS(ddr3_tip_bus_access + (dev_num, ACCESS_TYPE_UNICAST, if_id, + phy_access, phy_id, phy_type, reg_addr, 0, + OPERATION_READ)); + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, + PHY_REG_FILE_ACCESS, data_read, MASK_ALL_BITS)); + + /* + * only 16 lsb bit are valid in Phy (each register is different, + * some can actually be less than 16 bits) + */ + *data = (data_read[if_id] & 0xffff); + } + + return MV_OK; +} + +/* + * Bus write access + */ +int ddr3_tip_bus_write(u32 dev_num, enum hws_access_type interface_access, + u32 if_id, enum hws_access_type phy_access, + u32 phy_id, enum hws_ddr_phy phy_type, u32 reg_addr, + u32 data_value) +{ + CHECK_STATUS(ddr3_tip_bus_access + (dev_num, interface_access, if_id, phy_access, + phy_id, phy_type, reg_addr, data_value, OPERATION_WRITE)); + + return MV_OK; +} + +/* + * Bus access routine (relevant for both read & write) + */ +static int ddr3_tip_bus_access(u32 dev_num, enum hws_access_type interface_access, + u32 if_id, enum hws_access_type phy_access, + u32 phy_id, enum hws_ddr_phy phy_type, u32 reg_addr, + u32 data_value, enum hws_operation oper_type) +{ + u32 addr_low = 0x3f & reg_addr; + u32 addr_hi = ((0xc0 & reg_addr) >> 6); + u32 data_p1 = + (oper_type << 30) + (addr_hi << 28) + (phy_access << 27) + + (phy_type << 26) + (phy_id << 22) + (addr_low << 16) + + (data_value & 0xffff); + u32 data_p2 = data_p1 + (1 << 31); + u32 start_if, end_if; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, interface_access, if_id, PHY_REG_FILE_ACCESS, + data_p1, MASK_ALL_BITS)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, interface_access, if_id, PHY_REG_FILE_ACCESS, + data_p2, MASK_ALL_BITS)); + + if (interface_access == ACCESS_TYPE_UNICAST) { + start_if = if_id; + end_if = if_id; + } else { + start_if = 0; + end_if = MAX_INTERFACE_NUM - 1; + } + + /* polling for read/write execution done */ + for (if_id = start_if; if_id <= end_if; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + CHECK_STATUS(is_bus_access_done + (dev_num, if_id, PHY_REG_FILE_ACCESS, 31)); + } + + return MV_OK; +} + +/* + * Check bus access done + */ +static int is_bus_access_done(u32 dev_num, u32 if_id, u32 dunit_reg_adrr, + u32 bit) +{ + u32 rd_data = 1; + u32 cnt = 0; + u32 data_read[MAX_INTERFACE_NUM]; + + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, dunit_reg_adrr, + data_read, MASK_ALL_BITS)); + rd_data = data_read[if_id]; + rd_data &= (1 << bit); + + while (rd_data != 0) { + if (cnt++ >= MAX_POLLING_ITERATIONS) + break; + + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, + dunit_reg_adrr, data_read, MASK_ALL_BITS)); + rd_data = data_read[if_id]; + rd_data &= (1 << bit); + } + + if (cnt < MAX_POLLING_ITERATIONS) + return MV_OK; + else + return MV_FAIL; +} + +/* + * Phy read-modify-write + */ +int ddr3_tip_bus_read_modify_write(u32 dev_num, enum hws_access_type access_type, + u32 interface_id, u32 phy_id, + enum hws_ddr_phy phy_type, u32 reg_addr, + u32 data_value, u32 reg_mask) +{ + u32 data_val = 0, if_id, start_if, end_if; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (access_type == ACCESS_TYPE_MULTICAST) { + start_if = 0; + end_if = MAX_INTERFACE_NUM - 1; + } else { + start_if = interface_id; + end_if = interface_id; + } + + for (if_id = start_if; if_id <= end_if; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, ACCESS_TYPE_UNICAST, phy_id, + phy_type, reg_addr, &data_val)); + data_value = (data_val & (~reg_mask)) | (data_value & reg_mask); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, phy_id, phy_type, reg_addr, + data_value)); + } + + return MV_OK; +} + +/* + * ADLL Calibration + */ +int adll_calibration(u32 dev_num, enum hws_access_type access_type, + u32 if_id, enum hws_ddr_freq frequency) +{ + struct hws_tip_freq_config_info freq_config_info; + u32 bus_cnt = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* Reset Diver_b assert -> de-assert */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, SDRAM_CONFIGURATION_REG, + 0, 0x10000000)); + mdelay(10); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, SDRAM_CONFIGURATION_REG, + 0x10000000, 0x10000000)); + + if (config_func_info[dev_num].tip_get_freq_config_info_func != NULL) { + CHECK_STATUS(config_func_info[dev_num]. + tip_get_freq_config_info_func((u8)dev_num, frequency, + &freq_config_info)); + } else { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("tip_get_freq_config_info_func is NULL")); + return MV_NOT_INITIALIZED; + } + + for (bus_cnt = 0; bus_cnt < GET_TOPOLOGY_NUM_OF_BUSES(); bus_cnt++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_cnt); + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, access_type, if_id, bus_cnt, + DDR_PHY_DATA, BW_PHY_REG, + freq_config_info.bw_per_freq << 8, 0x700)); + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, access_type, if_id, bus_cnt, + DDR_PHY_DATA, RATE_PHY_REG, + freq_config_info.rate_per_freq, 0x7)); + } + + /* DUnit to Phy drive post edge, ADLL reset assert de-assert */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, DRAM_PHY_CONFIGURATION, + 0, (0x80000000 | 0x40000000))); + mdelay(100 / (freq_val[frequency] / freq_val[DDR_FREQ_LOW_FREQ])); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, DRAM_PHY_CONFIGURATION, + (0x80000000 | 0x40000000), (0x80000000 | 0x40000000))); + + /* polling for ADLL Done */ + if (ddr3_tip_if_polling(dev_num, access_type, if_id, + 0x3ff03ff, 0x3ff03ff, PHY_LOCK_STATUS_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("Freq_set: DDR3 poll failed(1)")); + } + + /* pup data_pup reset assert-> deassert */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, SDRAM_CONFIGURATION_REG, + 0, 0x60000000)); + mdelay(10); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, SDRAM_CONFIGURATION_REG, + 0x60000000, 0x60000000)); + + return MV_OK; +} + +int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, + u32 if_id, enum hws_ddr_freq frequency) +{ + u32 cl_value = 0, cwl_value = 0, mem_mask = 0, val = 0, + bus_cnt = 0, t_hclk = 0, t_wr = 0, + refresh_interval_cnt = 0, cnt_id; + u32 t_refi = 0, end_if, start_if; + u32 bus_index = 0; + int is_dll_off = 0; + enum hws_speed_bin speed_bin_index = 0; + struct hws_tip_freq_config_info freq_config_info; + enum hws_result *flow_result = training_result[training_stage]; + u32 adll_tap = 0; + u32 cs_mask[MAX_INTERFACE_NUM]; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, + ("dev %d access %d IF %d freq %d\n", dev_num, + access_type, if_id, frequency)); + + if (frequency == DDR_FREQ_LOW_FREQ) + is_dll_off = 1; + if (access_type == ACCESS_TYPE_MULTICAST) { + start_if = 0; + end_if = MAX_INTERFACE_NUM - 1; + } else { + start_if = if_id; + end_if = if_id; + } + + /* calculate interface cs mask - Oferb 4/11 */ + /* speed bin can be different for each interface */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + /* cs enable is active low */ + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + cs_mask[if_id] = CS_BIT_MASK; + training_result[training_stage][if_id] = TEST_SUCCESS; + ddr3_tip_calc_cs_mask(dev_num, if_id, effective_cs, + &cs_mask[if_id]); + } + + /* speed bin can be different for each interface */ + /* + * moti b - need to remove the loop for multicas access functions + * and loop the unicast access functions + */ + for (if_id = start_if; if_id <= end_if; if_id++) { + if (IS_ACTIVE(tm->if_act_mask, if_id) == 0) + continue; + + flow_result[if_id] = TEST_SUCCESS; + speed_bin_index = + tm->interface_params[if_id].speed_bin_index; + if (tm->interface_params[if_id].memory_freq == + frequency) { + cl_value = + tm->interface_params[if_id].cas_l; + cwl_value = + tm->interface_params[if_id].cas_wl; + } else { + cl_value = + cas_latency_table[speed_bin_index].cl_val[frequency]; + cwl_value = + cas_write_latency_table[speed_bin_index]. + cl_val[frequency]; + } + + DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, + ("Freq_set dev 0x%x access 0x%x if 0x%x freq 0x%x speed %d:\n\t", + dev_num, access_type, if_id, + frequency, speed_bin_index)); + + for (cnt_id = 0; cnt_id < DDR_FREQ_LIMIT; cnt_id++) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, + ("%d ", + cas_latency_table[speed_bin_index]. + cl_val[cnt_id])); + } + + DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, ("\n")); + mem_mask = 0; + for (bus_index = 0; bus_index < GET_TOPOLOGY_NUM_OF_BUSES(); + bus_index++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_index); + mem_mask |= + tm->interface_params[if_id]. + as_bus_params[bus_index].mirror_enable_bitmask; + } + + if (mem_mask != 0) { + /* motib redundent in KW28 */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, + if_id, + CS_ENABLE_REG, 0, 0x8)); + } + + /* dll state after exiting SR */ + if (is_dll_off == 1) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DFS_REG, 0x1, 0x1)); + } else { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DFS_REG, 0, 0x1)); + } + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DUNIT_MMASK_REG, 0, 0x1)); + /* DFS - block transactions */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DFS_REG, 0x2, 0x2)); + + /* disable ODT in case of dll off */ + if (is_dll_off == 1) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + 0x1874, 0, 0x244)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + 0x1884, 0, 0x244)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + 0x1894, 0, 0x244)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + 0x18a4, 0, 0x244)); + } + + /* DFS - Enter Self-Refresh */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, DFS_REG, 0x4, + 0x4)); + /* polling on self refresh entry */ + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, + if_id, 0x8, 0x8, DFS_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("Freq_set: DDR3 poll failed on SR entry\n")); + } + + /* PLL configuration */ + if (config_func_info[dev_num].tip_set_freq_divider_func != NULL) { + config_func_info[dev_num]. + tip_set_freq_divider_func(dev_num, if_id, + frequency); + } + + /* PLL configuration End */ + + /* adjust t_refi to new frequency */ + t_refi = (tm->interface_params[if_id].interface_temp == + HWS_TEMP_HIGH) ? TREFI_LOW : TREFI_HIGH; + t_refi *= 1000; /*psec */ + + /* HCLK in[ps] */ + t_hclk = MEGA / (freq_val[frequency] / 2); + refresh_interval_cnt = t_refi / t_hclk; /* no units */ + val = 0x4000 | refresh_interval_cnt; + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + SDRAM_CONFIGURATION_REG, val, 0x7fff)); + + /* DFS - CL/CWL/WR parameters after exiting SR */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, DFS_REG, + (cl_mask_table[cl_value] << 8), 0xf00)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, DFS_REG, + (cwl_mask_table[cwl_value] << 12), 0x7000)); + t_wr = speed_bin_table(speed_bin_index, SPEED_BIN_TWR); + t_wr = (t_wr / 1000); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, DFS_REG, + (twr_mask_table[t_wr + 1] << 16), 0x70000)); + + /* Restore original RTT values if returning from DLL OFF mode */ + if (is_dll_off == 1) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, 0x1874, + g_dic | g_rtt_nom, 0x266)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, 0x1884, + g_dic | g_rtt_nom, 0x266)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, 0x1894, + g_dic | g_rtt_nom, 0x266)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, 0x18a4, + g_dic | g_rtt_nom, 0x266)); + } + + /* Reset Diver_b assert -> de-assert */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + SDRAM_CONFIGURATION_REG, 0, 0x10000000)); + mdelay(10); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + SDRAM_CONFIGURATION_REG, 0x10000000, 0x10000000)); + + /* Adll configuration function of process and Frequency */ + if (config_func_info[dev_num].tip_get_freq_config_info_func != NULL) { + CHECK_STATUS(config_func_info[dev_num]. + tip_get_freq_config_info_func(dev_num, frequency, + &freq_config_info)); + } + /* TBD check milo5 using device ID ? */ + for (bus_cnt = 0; bus_cnt < GET_TOPOLOGY_NUM_OF_BUSES(); + bus_cnt++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_cnt); + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, bus_cnt, DDR_PHY_DATA, + 0x92, + freq_config_info. + bw_per_freq << 8 + /*freq_mask[dev_num][frequency] << 8 */ + , 0x700)); + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + bus_cnt, DDR_PHY_DATA, 0x94, + freq_config_info.rate_per_freq, 0x7)); + } + + /* DUnit to Phy drive post edge, ADLL reset assert de-assert */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DRAM_PHY_CONFIGURATION, 0, + (0x80000000 | 0x40000000))); + mdelay(100 / (freq_val[frequency] / freq_val[DDR_FREQ_LOW_FREQ])); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + DRAM_PHY_CONFIGURATION, (0x80000000 | 0x40000000), + (0x80000000 | 0x40000000))); + + /* polling for ADLL Done */ + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x3ff03ff, + 0x3ff03ff, PHY_LOCK_STATUS_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("Freq_set: DDR3 poll failed(1)\n")); + } + + /* pup data_pup reset assert-> deassert */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + SDRAM_CONFIGURATION_REG, 0, 0x60000000)); + mdelay(10); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + SDRAM_CONFIGURATION_REG, 0x60000000, 0x60000000)); + + /* Set proper timing params before existing Self-Refresh */ + ddr3_tip_set_timing(dev_num, access_type, if_id, frequency); + if (delay_enable != 0) { + adll_tap = MEGA / (freq_val[frequency] * 64); + ddr3_tip_cmd_addr_init_delay(dev_num, adll_tap); + } + + /* Exit SR */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, DFS_REG, 0, + 0x4)); + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0, 0x8, DFS_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("Freq_set: DDR3 poll failed(2)")); + } + + /* Refresh Command */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + SDRAM_OPERATION_REG, 0x2, 0xf1f)); + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0, 0x1f, + SDRAM_OPERATION_REG, MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("Freq_set: DDR3 poll failed(3)")); + } + + /* Release DFS Block */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, DFS_REG, 0, + 0x2)); + /* Controller to MBUS Retry - normal */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, DUNIT_MMASK_REG, + 0x1, 0x1)); + + /* MRO: Burst Length 8, CL , Auto_precharge 0x16cc */ + val = + ((cl_mask_table[cl_value] & 0x1) << 2) | + ((cl_mask_table[cl_value] & 0xe) << 3); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, MR0_REG, + val, (0x7 << 4) | (1 << 2))); + /* MR2: CWL = 10 , Auto Self-Refresh - disable */ + val = (cwl_mask_table[cwl_value] << 3); + /* + * nklein 24.10.13 - should not be here - leave value as set in + * the init configuration val |= (1 << 9); + * val |= ((tm->interface_params[if_id]. + * interface_temp == HWS_TEMP_HIGH) ? (1 << 7) : 0); + */ + /* nklein 24.10.13 - see above comment */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, + if_id, MR2_REG, + val, (0x7 << 3))); + + /* ODT TIMING */ + val = ((cl_value - cwl_value + 1) << 4) | + ((cl_value - cwl_value + 6) << 8) | + ((cl_value - 1) << 12) | ((cl_value + 6) << 16); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, + if_id, ODT_TIMING_LOW, + val, 0xffff0)); + val = 0x71 | ((cwl_value - 1) << 8) | ((cwl_value + 5) << 12); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, + if_id, ODT_TIMING_HI_REG, + val, 0xffff)); + + /* ODT Active */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, + if_id, + DUNIT_ODT_CONTROL_REG, + 0xf, 0xf)); + + /* re-write CL */ + val = ((cl_mask_table[cl_value] & 0x1) << 2) | + ((cl_mask_table[cl_value] & 0xe) << 3); + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, + 0, MR0_REG, val, + (0x7 << 4) | (1 << 2))); + + /* re-write CWL */ + val = (cwl_mask_table[cwl_value] << 3); + CHECK_STATUS(ddr3_tip_write_mrs_cmd(dev_num, cs_mask, MRS2_CMD, + val, (0x7 << 3))); + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, + 0, MR2_REG, val, (0x7 << 3))); + + if (mem_mask != 0) { + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, + if_id, + CS_ENABLE_REG, + 1 << 3, 0x8)); + } + } + + return MV_OK; +} + +/* + * Set ODT values + */ +static int ddr3_tip_write_odt(u32 dev_num, enum hws_access_type access_type, + u32 if_id, u32 cl_value, u32 cwl_value) +{ + /* ODT TIMING */ + u32 val = (cl_value - cwl_value + 6); + + val = ((cl_value - cwl_value + 1) << 4) | ((val & 0xf) << 8) | + (((cl_value - 1) & 0xf) << 12) | + (((cl_value + 6) & 0xf) << 16) | (((val & 0x10) >> 4) << 21); + val |= (((cl_value - 1) >> 4) << 22) | (((cl_value + 6) >> 4) << 23); + + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + ODT_TIMING_LOW, val, 0xffff0)); + val = 0x71 | ((cwl_value - 1) << 8) | ((cwl_value + 5) << 12); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + ODT_TIMING_HI_REG, val, 0xffff)); + if (odt_additional == 1) { + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, + if_id, + SDRAM_ODT_CONTROL_HIGH_REG, + 0xf, 0xf)); + } + + /* ODT Active */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + DUNIT_ODT_CONTROL_REG, 0xf, 0xf)); + + return MV_OK; +} + +/* + * Set Timing values for training + */ +static int ddr3_tip_set_timing(u32 dev_num, enum hws_access_type access_type, + u32 if_id, enum hws_ddr_freq frequency) +{ + u32 t_ckclk = 0, t_ras = 0; + u32 t_rcd = 0, t_rp = 0, t_wr = 0, t_wtr = 0, t_rrd = 0, t_rtp = 0, + t_rfc = 0, t_mod = 0; + u32 val = 0, page_size = 0; + enum hws_speed_bin speed_bin_index; + enum hws_mem_size memory_size = MEM_2G; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + speed_bin_index = tm->interface_params[if_id].speed_bin_index; + memory_size = tm->interface_params[if_id].memory_size; + page_size = + (tm->interface_params[if_id].bus_width == + BUS_WIDTH_8) ? page_param[memory_size]. + page_size_8bit : page_param[memory_size].page_size_16bit; + t_ckclk = (MEGA / freq_val[frequency]); + t_rrd = (page_size == 1) ? speed_bin_table(speed_bin_index, + SPEED_BIN_TRRD1K) : + speed_bin_table(speed_bin_index, SPEED_BIN_TRRD2K); + t_rrd = GET_MAX_VALUE(t_ckclk * 4, t_rrd); + t_rtp = GET_MAX_VALUE(t_ckclk * 4, speed_bin_table(speed_bin_index, + SPEED_BIN_TRTP)); + t_wtr = GET_MAX_VALUE(t_ckclk * 4, speed_bin_table(speed_bin_index, + SPEED_BIN_TWTR)); + t_ras = TIME_2_CLOCK_CYCLES(speed_bin_table(speed_bin_index, + SPEED_BIN_TRAS), + t_ckclk); + t_rcd = TIME_2_CLOCK_CYCLES(speed_bin_table(speed_bin_index, + SPEED_BIN_TRCD), + t_ckclk); + t_rp = TIME_2_CLOCK_CYCLES(speed_bin_table(speed_bin_index, + SPEED_BIN_TRP), + t_ckclk); + t_wr = TIME_2_CLOCK_CYCLES(speed_bin_table(speed_bin_index, + SPEED_BIN_TWR), + t_ckclk); + t_wtr = TIME_2_CLOCK_CYCLES(t_wtr, t_ckclk); + t_rrd = TIME_2_CLOCK_CYCLES(t_rrd, t_ckclk); + t_rtp = TIME_2_CLOCK_CYCLES(t_rtp, t_ckclk); + t_rfc = TIME_2_CLOCK_CYCLES(rfc_table[memory_size] * 1000, t_ckclk); + t_mod = GET_MAX_VALUE(t_ckclk * 24, 15000); + t_mod = TIME_2_CLOCK_CYCLES(t_mod, t_ckclk); + + /* SDRAM Timing Low */ + val = (t_ras & 0xf) | (t_rcd << 4) | (t_rp << 8) | (t_wr << 12) | + (t_wtr << 16) | (((t_ras & 0x30) >> 4) << 20) | (t_rrd << 24) | + (t_rtp << 28); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + SDRAM_TIMING_LOW_REG, val, 0xff3fffff)); + + /* SDRAM Timing High */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + SDRAM_TIMING_HIGH_REG, + t_rfc & 0x7f, 0x7f)); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + SDRAM_TIMING_HIGH_REG, + 0x180, 0x180)); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + SDRAM_TIMING_HIGH_REG, + 0x600, 0x600)); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + SDRAM_TIMING_HIGH_REG, + 0x1800, 0xf800)); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + SDRAM_TIMING_HIGH_REG, + ((t_rfc & 0x380) >> 7) << 16, 0x70000)); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + SDRAM_TIMING_HIGH_REG, 0, + 0x380000)); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + SDRAM_TIMING_HIGH_REG, + (t_mod & 0xf) << 25, 0x1e00000)); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + SDRAM_TIMING_HIGH_REG, + (t_mod >> 4) << 30, 0xc0000000)); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + SDRAM_TIMING_HIGH_REG, + 0x16000000, 0x1e000000)); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + SDRAM_TIMING_HIGH_REG, + 0x40000000, 0xc0000000)); + + return MV_OK; +} + +/* + * Mode Read + */ +int hws_ddr3_tip_mode_read(u32 dev_num, struct mode_info *mode_info) +{ + u32 ret; + + ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + MR0_REG, mode_info->reg_mr0, MASK_ALL_BITS); + if (ret != MV_OK) + return ret; + + ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + MR1_REG, mode_info->reg_mr1, MASK_ALL_BITS); + if (ret != MV_OK) + return ret; + + ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + MR2_REG, mode_info->reg_mr2, MASK_ALL_BITS); + if (ret != MV_OK) + return ret; + + ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + MR3_REG, mode_info->reg_mr2, MASK_ALL_BITS); + if (ret != MV_OK) + return ret; + + ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + READ_DATA_SAMPLE_DELAY, mode_info->read_data_sample, + MASK_ALL_BITS); + if (ret != MV_OK) + return ret; + + ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + READ_DATA_READY_DELAY, mode_info->read_data_ready, + MASK_ALL_BITS); + if (ret != MV_OK) + return ret; + + return MV_OK; +} + +/* + * Get first active IF + */ +int ddr3_tip_get_first_active_if(u8 dev_num, u32 interface_mask, + u32 *interface_id) +{ + u32 if_id; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + if (interface_mask & (1 << if_id)) { + *interface_id = if_id; + break; + } + } + + return MV_OK; +} + +/* + * Write CS Result + */ +int ddr3_tip_write_cs_result(u32 dev_num, u32 offset) +{ + u32 if_id, bus_num, cs_bitmask, data_val, cs_num; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_num = 0; bus_num < tm->num_of_bus_per_interface; + bus_num++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_num); + cs_bitmask = + tm->interface_params[if_id]. + as_bus_params[bus_num].cs_bitmask; + if (cs_bitmask != effective_cs) { + cs_num = GET_CS_FROM_MASK(cs_bitmask); + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, bus_num, + DDR_PHY_DATA, + offset + + CS_REG_VALUE(effective_cs), + &data_val); + ddr3_tip_bus_write(dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, + bus_num, DDR_PHY_DATA, + offset + + CS_REG_VALUE(cs_num), + data_val); + } + } + } + + return MV_OK; +} + +/* + * Write MRS + */ +int ddr3_tip_write_mrs_cmd(u32 dev_num, u32 *cs_mask_arr, u32 cmd, + u32 data, u32 mask) +{ + u32 if_id, reg; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + reg = (cmd == MRS1_CMD) ? MR1_REG : MR2_REG; + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, reg, data, mask)); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + SDRAM_OPERATION_REG, + (cs_mask_arr[if_id] << 8) | cmd, 0xf1f)); + } + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, 0, + 0x1f, SDRAM_OPERATION_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("write_mrs_cmd: Poll cmd fail")); + } + } + + return MV_OK; +} + +/* + * Reset XSB Read FIFO + */ +int ddr3_tip_reset_fifo_ptr(u32 dev_num) +{ + u32 if_id = 0; + + /* Configure PHY reset value to 0 in order to "clean" the FIFO */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, + if_id, 0x15c8, 0, 0xff000000)); + /* + * Move PHY to RL mode (only in RL mode the PHY overrides FIFO values + * during FIFO reset) + */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, + if_id, TRAINING_SW_2_REG, + 0x1, 0x9)); + /* In order that above configuration will influence the PHY */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, + if_id, 0x15b0, + 0x80000000, 0x80000000)); + /* Reset read fifo assertion */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, + if_id, 0x1400, 0, 0x40000000)); + /* Reset read fifo deassertion */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, + if_id, 0x1400, + 0x40000000, 0x40000000)); + /* Move PHY back to functional mode */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, + if_id, TRAINING_SW_2_REG, + 0x8, 0x9)); + /* Stop training machine */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, + if_id, 0x15b4, 0x10000, 0x10000)); + + return MV_OK; +} + +/* + * Reset Phy registers + */ +int ddr3_tip_ddr3_reset_phy_regs(u32 dev_num) +{ + u32 if_id, phy_id, cs; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (phy_id = 0; phy_id < tm->num_of_bus_per_interface; + phy_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, phy_id); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, + phy_id, DDR_PHY_DATA, + WL_PHY_REG + + CS_REG_VALUE(effective_cs), + phy_reg0_val)); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, phy_id, DDR_PHY_DATA, + RL_PHY_REG + CS_REG_VALUE(effective_cs), + phy_reg2_val)); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, phy_id, DDR_PHY_DATA, + READ_CENTRALIZATION_PHY_REG + + CS_REG_VALUE(effective_cs), phy_reg3_val)); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, phy_id, DDR_PHY_DATA, + WRITE_CENTRALIZATION_PHY_REG + + CS_REG_VALUE(effective_cs), phy_reg3_val)); + } + } + + /* Set Receiver Calibration value */ + for (cs = 0; cs < MAX_CS_NUM; cs++) { + /* PHY register 0xdb bits[5:0] - configure to 63 */ + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + DDR_PHY_DATA, CSN_IOB_VREF_REG(cs), 63)); + } + + return MV_OK; +} + +/* + * Restore Dunit registers + */ +int ddr3_tip_restore_dunit_regs(u32 dev_num) +{ + u32 index_cnt; + + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, CALIB_MACHINE_CTRL_REG, + 0x1, 0x1)); + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, CALIB_MACHINE_CTRL_REG, + calibration_update_control << 3, + 0x3 << 3)); + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, + ODPG_WRITE_READ_MODE_ENABLE_REG, + 0xffff, MASK_ALL_BITS)); + + for (index_cnt = 0; index_cnt < ARRAY_SIZE(odpg_default_value); + index_cnt++) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + odpg_default_value[index_cnt].reg_addr, + odpg_default_value[index_cnt].reg_data, + odpg_default_value[index_cnt].reg_mask)); + } + + return MV_OK; +} + +/* + * Auto tune main flow + */ +static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) +{ + enum hws_ddr_freq freq = init_freq; + struct init_cntr_param init_cntr_prm; + int ret = MV_OK; + u32 if_id; + u32 max_cs = hws_ddr3_tip_max_cs_get(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + +#ifndef EXCLUDE_SWITCH_DEBUG + if (debug_training == DEBUG_LEVEL_TRACE) { + CHECK_STATUS(print_device_info((u8)dev_num)); + } +#endif + + for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { + CHECK_STATUS(ddr3_tip_ddr3_reset_phy_regs(dev_num)); + } + /* Set to 0 after each loop to avoid illegal value may be used */ + effective_cs = 0; + + freq = init_freq; + if (is_pll_before_init != 0) { + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + config_func_info[dev_num].tip_set_freq_divider_func( + (u8)dev_num, if_id, freq); + } + } + + if (is_adll_calib_before_init != 0) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("with adll calib before init\n")); + adll_calibration(dev_num, ACCESS_TYPE_MULTICAST, 0, freq); + } + + if (is_reg_dump != 0) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("Dump before init controller\n")); + ddr3_tip_reg_dump(dev_num); + } + + if (mask_tune_func & INIT_CONTROLLER_MASK_BIT) { + training_stage = INIT_CONTROLLER; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("INIT_CONTROLLER_MASK_BIT\n")); + init_cntr_prm.do_mrs_phy = 1; + init_cntr_prm.is_ctrl64_bit = 0; + init_cntr_prm.init_phy = 1; + init_cntr_prm.msys_init = 0; + ret = hws_ddr3_tip_init_controller(dev_num, &init_cntr_prm); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("hws_ddr3_tip_init_controller failure\n")); + if (debug_mode == 0) + return MV_FAIL; + } + } + +#ifdef STATIC_ALGO_SUPPORT + if (mask_tune_func & STATIC_LEVELING_MASK_BIT) { + training_stage = STATIC_LEVELING; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("STATIC_LEVELING_MASK_BIT\n")); + ret = ddr3_tip_run_static_alg(dev_num, freq); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_run_static_alg failure\n")); + if (debug_mode == 0) + return MV_FAIL; + } + } +#endif + + if (mask_tune_func & SET_LOW_FREQ_MASK_BIT) { + training_stage = SET_LOW_FREQ; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("SET_LOW_FREQ_MASK_BIT %d\n", + freq_val[low_freq])); + ret = ddr3_tip_freq_set(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, low_freq); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_freq_set failure\n")); + if (debug_mode == 0) + return MV_FAIL; + } + } + + for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { + if (mask_tune_func & LOAD_PATTERN_MASK_BIT) { + training_stage = LOAD_PATTERN; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("LOAD_PATTERN_MASK_BIT #%d\n", + effective_cs)); + ret = ddr3_tip_load_all_pattern_to_mem(dev_num); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_load_all_pattern_to_mem failure CS #%d\n", + effective_cs)); + if (debug_mode == 0) + return MV_FAIL; + } + } + } + /* Set to 0 after each loop to avoid illegal value may be used */ + effective_cs = 0; + + if (mask_tune_func & SET_MEDIUM_FREQ_MASK_BIT) { + training_stage = SET_MEDIUM_FREQ; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("SET_MEDIUM_FREQ_MASK_BIT %d\n", + freq_val[medium_freq])); + ret = + ddr3_tip_freq_set(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, medium_freq); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_freq_set failure\n")); + if (debug_mode == 0) + return MV_FAIL; + } + } + + if (mask_tune_func & WRITE_LEVELING_MASK_BIT) { + training_stage = WRITE_LEVELING; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("WRITE_LEVELING_MASK_BIT\n")); + if ((rl_mid_freq_wa == 0) || (freq_val[medium_freq] == 533)) { + ret = ddr3_tip_dynamic_write_leveling(dev_num); + } else { + /* Use old WL */ + ret = ddr3_tip_legacy_dynamic_write_leveling(dev_num); + } + + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_dynamic_write_leveling failure\n")); + if (debug_mode == 0) + return MV_FAIL; + } + } + + for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { + if (mask_tune_func & LOAD_PATTERN_2_MASK_BIT) { + training_stage = LOAD_PATTERN_2; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("LOAD_PATTERN_2_MASK_BIT CS #%d\n", + effective_cs)); + ret = ddr3_tip_load_all_pattern_to_mem(dev_num); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_load_all_pattern_to_mem failure CS #%d\n", + effective_cs)); + if (debug_mode == 0) + return MV_FAIL; + } + } + } + /* Set to 0 after each loop to avoid illegal value may be used */ + effective_cs = 0; + + if (mask_tune_func & READ_LEVELING_MASK_BIT) { + training_stage = READ_LEVELING; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("READ_LEVELING_MASK_BIT\n")); + if ((rl_mid_freq_wa == 0) || (freq_val[medium_freq] == 533)) { + ret = ddr3_tip_dynamic_read_leveling(dev_num, medium_freq); + } else { + /* Use old RL */ + ret = ddr3_tip_legacy_dynamic_read_leveling(dev_num); + } + + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_dynamic_read_leveling failure\n")); + if (debug_mode == 0) + return MV_FAIL; + } + } + + if (mask_tune_func & WRITE_LEVELING_SUPP_MASK_BIT) { + training_stage = WRITE_LEVELING_SUPP; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("WRITE_LEVELING_SUPP_MASK_BIT\n")); + ret = ddr3_tip_dynamic_write_leveling_supp(dev_num); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_dynamic_write_leveling_supp failure\n")); + if (debug_mode == 0) + return MV_FAIL; + } + } + + for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { + if (mask_tune_func & PBS_RX_MASK_BIT) { + training_stage = PBS_RX; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("PBS_RX_MASK_BIT CS #%d\n", + effective_cs)); + ret = ddr3_tip_pbs_rx(dev_num); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_pbs_rx failure CS #%d\n", + effective_cs)); + if (debug_mode == 0) + return MV_FAIL; + } + } + } + + for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { + if (mask_tune_func & PBS_TX_MASK_BIT) { + training_stage = PBS_TX; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("PBS_TX_MASK_BIT CS #%d\n", + effective_cs)); + ret = ddr3_tip_pbs_tx(dev_num); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_pbs_tx failure CS #%d\n", + effective_cs)); + if (debug_mode == 0) + return MV_FAIL; + } + } + } + /* Set to 0 after each loop to avoid illegal value may be used */ + effective_cs = 0; + + if (mask_tune_func & SET_TARGET_FREQ_MASK_BIT) { + training_stage = SET_TARGET_FREQ; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("SET_TARGET_FREQ_MASK_BIT %d\n", + freq_val[tm-> + interface_params[first_active_if]. + memory_freq])); + ret = ddr3_tip_freq_set(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, + tm->interface_params[first_active_if]. + memory_freq); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_freq_set failure\n")); + if (debug_mode == 0) + return MV_FAIL; + } + } + + if (mask_tune_func & WRITE_LEVELING_TF_MASK_BIT) { + training_stage = WRITE_LEVELING_TF; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("WRITE_LEVELING_TF_MASK_BIT\n")); + ret = ddr3_tip_dynamic_write_leveling(dev_num); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_dynamic_write_leveling TF failure\n")); + if (debug_mode == 0) + return MV_FAIL; + } + } + + if (mask_tune_func & LOAD_PATTERN_HIGH_MASK_BIT) { + training_stage = LOAD_PATTERN_HIGH; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("LOAD_PATTERN_HIGH\n")); + ret = ddr3_tip_load_all_pattern_to_mem(dev_num); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_load_all_pattern_to_mem failure\n")); + if (debug_mode == 0) + return MV_FAIL; + } + } + + if (mask_tune_func & READ_LEVELING_TF_MASK_BIT) { + training_stage = READ_LEVELING_TF; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("READ_LEVELING_TF_MASK_BIT\n")); + ret = ddr3_tip_dynamic_read_leveling(dev_num, tm-> + interface_params[first_active_if]. + memory_freq); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_dynamic_read_leveling TF failure\n")); + if (debug_mode == 0) + return MV_FAIL; + } + } + + if (mask_tune_func & DM_PBS_TX_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("DM_PBS_TX_MASK_BIT\n")); + } + + for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { + if (mask_tune_func & VREF_CALIBRATION_MASK_BIT) { + training_stage = VREF_CALIBRATION; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("VREF\n")); + ret = ddr3_tip_vref(dev_num); + if (is_reg_dump != 0) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("VREF Dump\n")); + ddr3_tip_reg_dump(dev_num); + } + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_vref failure\n")); + if (debug_mode == 0) + return MV_FAIL; + } + } + } + /* Set to 0 after each loop to avoid illegal value may be used */ + effective_cs = 0; + + for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { + if (mask_tune_func & CENTRALIZATION_RX_MASK_BIT) { + training_stage = CENTRALIZATION_RX; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("CENTRALIZATION_RX_MASK_BIT CS #%d\n", + effective_cs)); + ret = ddr3_tip_centralization_rx(dev_num); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_centralization_rx failure CS #%d\n", + effective_cs)); + if (debug_mode == 0) + return MV_FAIL; + } + } + } + /* Set to 0 after each loop to avoid illegal value may be used */ + effective_cs = 0; + + for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { + if (mask_tune_func & WRITE_LEVELING_SUPP_TF_MASK_BIT) { + training_stage = WRITE_LEVELING_SUPP_TF; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("WRITE_LEVELING_SUPP_TF_MASK_BIT CS #%d\n", + effective_cs)); + ret = ddr3_tip_dynamic_write_leveling_supp(dev_num); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_dynamic_write_leveling_supp TF failure CS #%d\n", + effective_cs)); + if (debug_mode == 0) + return MV_FAIL; + } + } + } + /* Set to 0 after each loop to avoid illegal value may be used */ + effective_cs = 0; + + for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { + if (mask_tune_func & CENTRALIZATION_TX_MASK_BIT) { + training_stage = CENTRALIZATION_TX; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("CENTRALIZATION_TX_MASK_BIT CS #%d\n", + effective_cs)); + ret = ddr3_tip_centralization_tx(dev_num); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (ret != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("ddr3_tip_centralization_tx failure CS #%d\n", + effective_cs)); + if (debug_mode == 0) + return MV_FAIL; + } + } + } + /* Set to 0 after each loop to avoid illegal value may be used */ + effective_cs = 0; + + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("restore registers to default\n")); + /* restore register values */ + CHECK_STATUS(ddr3_tip_restore_dunit_regs(dev_num)); + + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + + return MV_OK; +} + +/* + * DDR3 Dynamic training flow + */ +static int ddr3_tip_ddr3_auto_tune(u32 dev_num) +{ + u32 if_id, stage, ret; + int is_if_fail = 0, is_auto_tune_fail = 0; + + training_stage = INIT_CONTROLLER; + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + for (stage = 0; stage < MAX_STAGE_LIMIT; stage++) + training_result[stage][if_id] = NO_TEST_DONE; + } + + ret = ddr3_tip_ddr3_training_main_flow(dev_num); + + /* activate XSB test */ + if (xsb_validate_type != 0) { + run_xsb_test(dev_num, xsb_validation_base_address, 1, 1, + 0x1024); + } + + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + + /* print log */ + CHECK_STATUS(ddr3_tip_print_log(dev_num, window_mem_addr)); + + if (ret != MV_OK) { + CHECK_STATUS(ddr3_tip_print_stability_log(dev_num)); + } + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + is_if_fail = 0; + for (stage = 0; stage < MAX_STAGE_LIMIT; stage++) { + if (training_result[stage][if_id] == TEST_FAILED) + is_if_fail = 1; + } + if (is_if_fail == 1) { + is_auto_tune_fail = 1; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("Auto Tune failed for IF %d\n", + if_id)); + } + } + + if ((ret == MV_FAIL) || (is_auto_tune_fail == 1)) + return MV_FAIL; + else + return MV_OK; +} + +/* + * Enable init sequence + */ +int ddr3_tip_enable_init_sequence(u32 dev_num) +{ + int is_fail = 0; + u32 if_id = 0, mem_mask = 0, bus_index = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* Enable init sequence */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, 0, + SDRAM_INIT_CONTROL_REG, 0x1, 0x1)); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0, 0x1, + SDRAM_INIT_CONTROL_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("polling failed IF %d\n", + if_id)); + is_fail = 1; + continue; + } + + mem_mask = 0; + for (bus_index = 0; bus_index < GET_TOPOLOGY_NUM_OF_BUSES(); + bus_index++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_index); + mem_mask |= + tm->interface_params[if_id]. + as_bus_params[bus_index].mirror_enable_bitmask; + } + + if (mem_mask != 0) { + /* Disable Multi CS */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, + if_id, CS_ENABLE_REG, 1 << 3, + 1 << 3)); + } + } + + return (is_fail == 0) ? MV_OK : MV_FAIL; +} + +int ddr3_tip_register_dq_table(u32 dev_num, u32 *table) +{ + dq_map_table = table; + + return MV_OK; +} + +/* + * Check if pup search is locked + */ +int ddr3_tip_is_pup_lock(u32 *pup_buf, enum hws_training_result read_mode) +{ + u32 bit_start = 0, bit_end = 0, bit_id; + + if (read_mode == RESULT_PER_BIT) { + bit_start = 0; + bit_end = BUS_WIDTH_IN_BITS - 1; + } else { + bit_start = 0; + bit_end = 0; + } + + for (bit_id = bit_start; bit_id <= bit_end; bit_id++) { + if (GET_LOCK_RESULT(pup_buf[bit_id]) == 0) + return 0; + } + + return 1; +} + +/* + * Get minimum buffer value + */ +u8 ddr3_tip_get_buf_min(u8 *buf_ptr) +{ + u8 min_val = 0xff; + u8 cnt = 0; + + for (cnt = 0; cnt < BUS_WIDTH_IN_BITS; cnt++) { + if (buf_ptr[cnt] < min_val) + min_val = buf_ptr[cnt]; + } + + return min_val; +} + +/* + * Get maximum buffer value + */ +u8 ddr3_tip_get_buf_max(u8 *buf_ptr) +{ + u8 max_val = 0; + u8 cnt = 0; + + for (cnt = 0; cnt < BUS_WIDTH_IN_BITS; cnt++) { + if (buf_ptr[cnt] > max_val) + max_val = buf_ptr[cnt]; + } + + return max_val; +} + +/* + * The following functions return memory parameters: + * bus and device width, device size + */ + +u32 hws_ddr3_get_bus_width(void) +{ + struct hws_topology_map *tm = ddr3_get_topology_map(); + + return (DDR3_IS_16BIT_DRAM_MODE(tm->bus_act_mask) == + 1) ? 16 : 32; +} + +u32 hws_ddr3_get_device_width(u32 if_id) +{ + struct hws_topology_map *tm = ddr3_get_topology_map(); + + return (tm->interface_params[if_id].bus_width == + BUS_WIDTH_8) ? 8 : 16; +} + +u32 hws_ddr3_get_device_size(u32 if_id) +{ + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (tm->interface_params[if_id].memory_size >= + MEM_SIZE_LAST) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("Error: Wrong device size of Cs: %d", + tm->interface_params[if_id].memory_size)); + return 0; + } else { + return 1 << tm->interface_params[if_id].memory_size; + } +} + +int hws_ddr3_calc_mem_cs_size(u32 if_id, u32 cs, u32 *cs_size) +{ + u32 cs_mem_size, dev_size; + + dev_size = hws_ddr3_get_device_size(if_id); + if (dev_size != 0) { + cs_mem_size = ((hws_ddr3_get_bus_width() / + hws_ddr3_get_device_width(if_id)) * dev_size); + + /* the calculated result in Gbytex16 to avoid float using */ + + if (cs_mem_size == 2) { + *cs_size = _128M; + } else if (cs_mem_size == 4) { + *cs_size = _256M; + } else if (cs_mem_size == 8) { + *cs_size = _512M; + } else if (cs_mem_size == 16) { + *cs_size = _1G; + } else if (cs_mem_size == 32) { + *cs_size = _2G; + } else { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("Error: Wrong Memory size of Cs: %d", cs)); + return MV_FAIL; + } + return MV_OK; + } else { + return MV_FAIL; + } +} + +int hws_ddr3_cs_base_adr_calc(u32 if_id, u32 cs, u32 *cs_base_addr) +{ + u32 cs_mem_size = 0; +#ifdef DEVICE_MAX_DRAM_ADDRESS_SIZE + u32 physical_mem_size; + u32 max_mem_size = DEVICE_MAX_DRAM_ADDRESS_SIZE; +#endif + + if (hws_ddr3_calc_mem_cs_size(if_id, cs, &cs_mem_size) != MV_OK) + return MV_FAIL; + +#ifdef DEVICE_MAX_DRAM_ADDRESS_SIZE + struct hws_topology_map *tm = ddr3_get_topology_map(); + /* + * if number of address pins doesn't allow to use max mem size that + * is defined in topology mem size is defined by + * DEVICE_MAX_DRAM_ADDRESS_SIZE + */ + physical_mem_size = + mv_hwsmem_size[tm->interface_params[0].memory_size]; + + if (hws_ddr3_get_device_width(cs) == 16) { + /* + * 16bit mem device can be twice more - no need in less + * significant pin + */ + max_mem_size = DEVICE_MAX_DRAM_ADDRESS_SIZE * 2; + } + + if (physical_mem_size > max_mem_size) { + cs_mem_size = max_mem_size * + (hws_ddr3_get_bus_width() / + hws_ddr3_get_device_width(if_id)); + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("Updated Physical Mem size is from 0x%x to %x\n", + physical_mem_size, + DEVICE_MAX_DRAM_ADDRESS_SIZE)); + } +#endif + + /* calculate CS base addr */ + *cs_base_addr = ((cs_mem_size) * cs) & 0xffff0000; + + return MV_OK; +} diff --git a/drivers/ddr/marvell/a38x/ddr3_training_bist.c b/drivers/ddr/marvell/a38x/ddr3_training_bist.c new file mode 100644 index 0000000..bd0e260 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_bist.c @@ -0,0 +1,289 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +static u32 bist_offset = 32; +enum hws_pattern sweep_pattern = PATTERN_KILLER_DQ0; + +static int ddr3_tip_bist_operation(u32 dev_num, + enum hws_access_type access_type, + u32 if_id, + enum hws_bist_operation oper_type); + +/* + * BIST activate + */ +int ddr3_tip_bist_activate(u32 dev_num, enum hws_pattern pattern, + enum hws_access_type access_type, u32 if_num, + enum hws_dir direction, + enum hws_stress_jump addr_stress_jump, + enum hws_pattern_duration duration, + enum hws_bist_operation oper_type, + u32 offset, u32 cs_num, u32 pattern_addr_length) +{ + u32 tx_burst_size; + u32 delay_between_burst; + u32 rd_mode, val; + u32 poll_cnt = 0, max_poll = 1000, i, start_if, end_if; + struct pattern_info *pattern_table = ddr3_tip_get_pattern_table(); + u32 read_data[MAX_INTERFACE_NUM]; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* ODPG Write enable from BIST */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_num, + ODPG_DATA_CONTROL_REG, 0x1, 0x1)); + /* ODPG Read enable/disable from BIST */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_num, + ODPG_DATA_CONTROL_REG, + (direction == OPER_READ) ? + 0x2 : 0, 0x2)); + CHECK_STATUS(ddr3_tip_load_pattern_to_odpg(dev_num, access_type, if_num, + pattern, offset)); + + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_num, + ODPG_DATA_BUF_SIZE_REG, + pattern_addr_length, MASK_ALL_BITS)); + tx_burst_size = (direction == OPER_WRITE) ? + pattern_table[pattern].tx_burst_size : 0; + delay_between_burst = (direction == OPER_WRITE) ? 2 : 0; + rd_mode = (direction == OPER_WRITE) ? 1 : 0; + CHECK_STATUS(ddr3_tip_configure_odpg + (dev_num, access_type, if_num, direction, + pattern_table[pattern].num_of_phases_tx, tx_burst_size, + pattern_table[pattern].num_of_phases_rx, + delay_between_burst, + rd_mode, cs_num, addr_stress_jump, duration)); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_num, + ODPG_PATTERN_ADDR_OFFSET_REG, + offset, MASK_ALL_BITS)); + if (oper_type == BIST_STOP) { + CHECK_STATUS(ddr3_tip_bist_operation(dev_num, access_type, + if_num, BIST_STOP)); + } else { + CHECK_STATUS(ddr3_tip_bist_operation(dev_num, access_type, + if_num, BIST_START)); + if (duration != DURATION_CONT) { + /* + * This pdelay is a WA, becuase polling fives "done" + * also the odpg did nmot finish its task + */ + if (access_type == ACCESS_TYPE_MULTICAST) { + start_if = 0; + end_if = MAX_INTERFACE_NUM - 1; + } else { + start_if = if_num; + end_if = if_num; + } + + for (i = start_if; i <= end_if; i++) { + VALIDATE_ACTIVE(tm-> + if_act_mask, i); + + for (poll_cnt = 0; poll_cnt < max_poll; + poll_cnt++) { + CHECK_STATUS(ddr3_tip_if_read + (dev_num, + ACCESS_TYPE_UNICAST, + if_num, ODPG_BIST_DONE, + read_data, + MASK_ALL_BITS)); + val = read_data[i]; + if ((val & 0x1) == 0x0) { + /* + * In SOC type devices this bit + * is self clear so, if it was + * cleared all good + */ + break; + } + } + + if (poll_cnt >= max_poll) { + DEBUG_TRAINING_BIST_ENGINE + (DEBUG_LEVEL_ERROR, + ("Bist poll failure 2\n")); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, + ACCESS_TYPE_UNICAST, + if_num, + ODPG_DATA_CONTROL_REG, 0, + MASK_ALL_BITS)); + return MV_FAIL; + } + } + + CHECK_STATUS(ddr3_tip_bist_operation + (dev_num, access_type, if_num, BIST_STOP)); + } + } + + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_num, + ODPG_DATA_CONTROL_REG, 0, + MASK_ALL_BITS)); + + return MV_OK; +} + +/* + * BIST read result + */ +int ddr3_tip_bist_read_result(u32 dev_num, u32 if_id, + struct bist_result *pst_bist_result) +{ + int ret; + u32 read_data[MAX_INTERFACE_NUM]; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (IS_ACTIVE(tm->if_act_mask, if_id) == 0) + return MV_NOT_SUPPORTED; + DEBUG_TRAINING_BIST_ENGINE(DEBUG_LEVEL_TRACE, + ("ddr3_tip_bist_read_result if_id %d\n", + if_id)); + ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_UNICAST, if_id, + ODPG_BIST_FAILED_DATA_HI_REG, read_data, + MASK_ALL_BITS); + if (ret != MV_OK) + return ret; + pst_bist_result->bist_fail_high = read_data[if_id]; + ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_UNICAST, if_id, + ODPG_BIST_FAILED_DATA_LOW_REG, read_data, + MASK_ALL_BITS); + if (ret != MV_OK) + return ret; + pst_bist_result->bist_fail_low = read_data[if_id]; + + ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_UNICAST, if_id, + ODPG_BIST_LAST_FAIL_ADDR_REG, read_data, + MASK_ALL_BITS); + if (ret != MV_OK) + return ret; + pst_bist_result->bist_last_fail_addr = read_data[if_id]; + ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_UNICAST, if_id, + ODPG_BIST_DATA_ERROR_COUNTER_REG, read_data, + MASK_ALL_BITS); + if (ret != MV_OK) + return ret; + pst_bist_result->bist_error_cnt = read_data[if_id]; + + return MV_OK; +} + +/* + * BIST flow - Activate & read result + */ +int hws_ddr3_run_bist(u32 dev_num, enum hws_pattern pattern, u32 *result, + u32 cs_num) +{ + int ret; + u32 i = 0; + u32 win_base; + struct bist_result st_bist_result; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (i = 0; i < MAX_INTERFACE_NUM; i++) { + VALIDATE_ACTIVE(tm->if_act_mask, i); + hws_ddr3_cs_base_adr_calc(i, cs_num, &win_base); + ret = ddr3_tip_bist_activate(dev_num, pattern, + ACCESS_TYPE_UNICAST, + i, OPER_WRITE, STRESS_NONE, + DURATION_SINGLE, BIST_START, + bist_offset + win_base, + cs_num, 15); + if (ret != MV_OK) { + printf("ddr3_tip_bist_activate failed (0x%x)\n", ret); + return ret; + } + + ret = ddr3_tip_bist_activate(dev_num, pattern, + ACCESS_TYPE_UNICAST, + i, OPER_READ, STRESS_NONE, + DURATION_SINGLE, BIST_START, + bist_offset + win_base, + cs_num, 15); + if (ret != MV_OK) { + printf("ddr3_tip_bist_activate failed (0x%x)\n", ret); + return ret; + } + + ret = ddr3_tip_bist_read_result(dev_num, i, &st_bist_result); + if (ret != MV_OK) { + printf("ddr3_tip_bist_read_result failed\n"); + return ret; + } + result[i] = st_bist_result.bist_error_cnt; + } + + return MV_OK; +} + +/* + * Set BIST Operation + */ + +static int ddr3_tip_bist_operation(u32 dev_num, + enum hws_access_type access_type, + u32 if_id, enum hws_bist_operation oper_type) +{ + if (oper_type == BIST_STOP) { + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + ODPG_BIST_DONE, 1 << 8, 1 << 8)); + } else { + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + ODPG_BIST_DONE, 1, 1)); + } + + return MV_OK; +} + +/* + * Print BIST result + */ +void ddr3_tip_print_bist_res(void) +{ + u32 dev_num = 0; + u32 i; + struct bist_result st_bist_result[MAX_INTERFACE_NUM]; + int res; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (i = 0; i < MAX_INTERFACE_NUM; i++) { + if (IS_ACTIVE(tm->if_act_mask, i) == 0) + continue; + + res = ddr3_tip_bist_read_result(dev_num, i, &st_bist_result[i]); + if (res != MV_OK) { + DEBUG_TRAINING_BIST_ENGINE( + DEBUG_LEVEL_ERROR, + ("ddr3_tip_bist_read_result failed\n")); + return; + } + } + + DEBUG_TRAINING_BIST_ENGINE( + DEBUG_LEVEL_INFO, + ("interface | error_cnt | fail_low | fail_high | fail_addr\n")); + + for (i = 0; i < MAX_INTERFACE_NUM; i++) { + if (IS_ACTIVE(tm->if_act_mask, i) == + 0) + continue; + + DEBUG_TRAINING_BIST_ENGINE( + DEBUG_LEVEL_INFO, + ("%d | 0x%08x | 0x%08x | 0x%08x | 0x%08x\n", + i, st_bist_result[i].bist_error_cnt, + st_bist_result[i].bist_fail_low, + st_bist_result[i].bist_fail_high, + st_bist_result[i].bist_last_fail_addr)); + } +} diff --git a/drivers/ddr/marvell/a38x/ddr3_training_centralization.c b/drivers/ddr/marvell/a38x/ddr3_training_centralization.c new file mode 100644 index 0000000..9d216da --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_centralization.c @@ -0,0 +1,714 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +#define VALIDATE_WIN_LENGTH(e1, e2, maxsize) \ + (((e2) + 1 > (e1) + (u8)MIN_WINDOW_SIZE) && \ + ((e2) + 1 < (e1) + (u8)maxsize)) +#define IS_WINDOW_OUT_BOUNDARY(e1, e2, maxsize) \ + (((e1) == 0 && (e2) != 0) || \ + ((e1) != (maxsize - 1) && (e2) == (maxsize - 1))) +#define CENTRAL_TX 0 +#define CENTRAL_RX 1 +#define NUM_OF_CENTRAL_TYPES 2 + +u32 start_pattern = PATTERN_KILLER_DQ0, end_pattern = PATTERN_KILLER_DQ7; +u32 start_if = 0, end_if = (MAX_INTERFACE_NUM - 1); +u8 bus_end_window[NUM_OF_CENTRAL_TYPES][MAX_INTERFACE_NUM][MAX_BUS_NUM]; +u8 bus_start_window[NUM_OF_CENTRAL_TYPES][MAX_INTERFACE_NUM][MAX_BUS_NUM]; +u8 centralization_state[MAX_INTERFACE_NUM][MAX_BUS_NUM]; +static u8 ddr3_tip_special_rx_run_once_flag; + +static int ddr3_tip_centralization(u32 dev_num, u32 mode); + +/* + * Centralization RX Flow + */ +int ddr3_tip_centralization_rx(u32 dev_num) +{ + CHECK_STATUS(ddr3_tip_special_rx(dev_num)); + CHECK_STATUS(ddr3_tip_centralization(dev_num, CENTRAL_RX)); + + return MV_OK; +} + +/* + * Centralization TX Flow + */ +int ddr3_tip_centralization_tx(u32 dev_num) +{ + CHECK_STATUS(ddr3_tip_centralization(dev_num, CENTRAL_TX)); + + return MV_OK; +} + +/* + * Centralization Flow + */ +static int ddr3_tip_centralization(u32 dev_num, u32 mode) +{ + enum hws_training_ip_stat training_result[MAX_INTERFACE_NUM]; + u32 if_id, pattern_id, bit_id; + u8 bus_id; + u8 cur_start_win[BUS_WIDTH_IN_BITS]; + u8 centralization_result[MAX_INTERFACE_NUM][BUS_WIDTH_IN_BITS]; + u8 cur_end_win[BUS_WIDTH_IN_BITS]; + u8 current_window[BUS_WIDTH_IN_BITS]; + u8 opt_window, waste_window, start_window_skew, end_window_skew; + u8 final_pup_window[MAX_INTERFACE_NUM][BUS_WIDTH_IN_BITS]; + struct hws_topology_map *tm = ddr3_get_topology_map(); + enum hws_training_result result_type = RESULT_PER_BIT; + enum hws_dir direction; + u32 *result[HWS_SEARCH_DIR_LIMIT]; + u32 reg_phy_off, reg; + u8 max_win_size; + int lock_success = 1; + u8 cur_end_win_min, cur_start_win_max; + u32 cs_enable_reg_val[MAX_INTERFACE_NUM]; + int is_if_fail = 0; + enum hws_result *flow_result = ddr3_tip_get_result_ptr(training_stage); + u32 pup_win_length = 0; + enum hws_search_dir search_dir_id; + u8 cons_tap = (mode == CENTRAL_TX) ? (64) : (0); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + /* save current cs enable reg val */ + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, + CS_ENABLE_REG, cs_enable_reg_val, MASK_ALL_BITS)); + /* enable single cs */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + CS_ENABLE_REG, (1 << 3), (1 << 3))); + } + + if (mode == CENTRAL_TX) { + max_win_size = MAX_WINDOW_SIZE_TX; + reg_phy_off = WRITE_CENTRALIZATION_PHY_REG + (effective_cs * 4); + direction = OPER_WRITE; + } else { + max_win_size = MAX_WINDOW_SIZE_RX; + reg_phy_off = READ_CENTRALIZATION_PHY_REG + (effective_cs * 4); + direction = OPER_READ; + } + + /* DB initialization */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_id = 0; + bus_id < tm->num_of_bus_per_interface; bus_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + centralization_state[if_id][bus_id] = 0; + bus_end_window[mode][if_id][bus_id] = + (max_win_size - 1) + cons_tap; + bus_start_window[mode][if_id][bus_id] = 0; + centralization_result[if_id][bus_id] = 0; + } + } + + /* start flow */ + for (pattern_id = start_pattern; pattern_id <= end_pattern; + pattern_id++) { + ddr3_tip_ip_training_wrapper(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, result_type, + HWS_CONTROL_ELEMENT_ADLL, + PARAM_NOT_CARE, direction, + tm-> + if_act_mask, 0x0, + max_win_size - 1, + max_win_size - 1, + pattern_id, EDGE_FPF, CS_SINGLE, + PARAM_NOT_CARE, training_result); + + for (if_id = start_if; if_id <= end_if; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_id = 0; + bus_id <= tm->num_of_bus_per_interface - 1; + bus_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + + for (search_dir_id = HWS_LOW2HIGH; + search_dir_id <= HWS_HIGH2LOW; + search_dir_id++) { + CHECK_STATUS + (ddr3_tip_read_training_result + (dev_num, if_id, + ACCESS_TYPE_UNICAST, bus_id, + ALL_BITS_PER_PUP, + search_dir_id, + direction, result_type, + TRAINING_LOAD_OPERATION_UNLOAD, + CS_SINGLE, + &result[search_dir_id], + 1, 0, 0)); + DEBUG_CENTRALIZATION_ENGINE + (DEBUG_LEVEL_INFO, + ("%s pat %d IF %d pup %d Regs: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", + ((mode == + CENTRAL_TX) ? "TX" : "RX"), + pattern_id, if_id, bus_id, + result[search_dir_id][0], + result[search_dir_id][1], + result[search_dir_id][2], + result[search_dir_id][3], + result[search_dir_id][4], + result[search_dir_id][5], + result[search_dir_id][6], + result[search_dir_id][7])); + } + + for (bit_id = 0; bit_id < BUS_WIDTH_IN_BITS; + bit_id++) { + /* check if this code is valid for 2 edge, probably not :( */ + cur_start_win[bit_id] = + GET_TAP_RESULT(result + [HWS_LOW2HIGH] + [bit_id], + EDGE_1); + cur_end_win[bit_id] = + GET_TAP_RESULT(result + [HWS_HIGH2LOW] + [bit_id], + EDGE_1); + /* window length */ + current_window[bit_id] = + cur_end_win[bit_id] - + cur_start_win[bit_id] + 1; + DEBUG_CENTRALIZATION_ENGINE + (DEBUG_LEVEL_TRACE, + ("cs %x patern %d IF %d pup %d cur_start_win %d cur_end_win %d current_window %d\n", + effective_cs, pattern_id, + if_id, bus_id, + cur_start_win[bit_id], + cur_end_win[bit_id], + current_window[bit_id])); + } + + if ((ddr3_tip_is_pup_lock + (result[HWS_LOW2HIGH], result_type)) && + (ddr3_tip_is_pup_lock + (result[HWS_HIGH2LOW], result_type))) { + /* read result success */ + DEBUG_CENTRALIZATION_ENGINE + (DEBUG_LEVEL_INFO, + ("Pup locked, pat %d IF %d pup %d\n", + pattern_id, if_id, bus_id)); + } else { + /* read result failure */ + DEBUG_CENTRALIZATION_ENGINE + (DEBUG_LEVEL_INFO, + ("fail Lock, pat %d IF %d pup %d\n", + pattern_id, if_id, bus_id)); + if (centralization_state[if_id][bus_id] + == 1) { + /* continue with next pup */ + DEBUG_CENTRALIZATION_ENGINE + (DEBUG_LEVEL_TRACE, + ("continue to next pup %d %d\n", + if_id, bus_id)); + continue; + } + + for (bit_id = 0; + bit_id < BUS_WIDTH_IN_BITS; + bit_id++) { + /* + * the next check is relevant + * only when using search + * machine 2 edges + */ + if (cur_start_win[bit_id] > 0 && + cur_end_win[bit_id] == 0) { + cur_end_win + [bit_id] = + max_win_size - 1; + DEBUG_CENTRALIZATION_ENGINE + (DEBUG_LEVEL_TRACE, + ("fail, IF %d pup %d bit %d fail #1\n", + if_id, bus_id, + bit_id)); + /* the next bit */ + continue; + } else { + centralization_state + [if_id][bus_id] = 1; + DEBUG_CENTRALIZATION_ENGINE + (DEBUG_LEVEL_TRACE, + ("fail, IF %d pup %d bit %d fail #2\n", + if_id, bus_id, + bit_id)); + } + } + + if (centralization_state[if_id][bus_id] + == 1) { + /* going to next pup */ + continue; + } + } /*bit */ + + opt_window = + ddr3_tip_get_buf_min(current_window); + /* final pup window length */ + final_pup_window[if_id][bus_id] = + ddr3_tip_get_buf_min(cur_end_win) - + ddr3_tip_get_buf_max(cur_start_win) + + 1; + waste_window = + opt_window - + final_pup_window[if_id][bus_id]; + start_window_skew = + ddr3_tip_get_buf_max(cur_start_win) - + ddr3_tip_get_buf_min( + cur_start_win); + end_window_skew = + ddr3_tip_get_buf_max( + cur_end_win) - + ddr3_tip_get_buf_min( + cur_end_win); + /* min/max updated with pattern change */ + cur_end_win_min = + ddr3_tip_get_buf_min( + cur_end_win); + cur_start_win_max = + ddr3_tip_get_buf_max( + cur_start_win); + bus_end_window[mode][if_id][bus_id] = + GET_MIN(bus_end_window[mode][if_id] + [bus_id], + cur_end_win_min); + bus_start_window[mode][if_id][bus_id] = + GET_MAX(bus_start_window[mode][if_id] + [bus_id], + cur_start_win_max); + DEBUG_CENTRALIZATION_ENGINE( + DEBUG_LEVEL_INFO, + ("pat %d IF %d pup %d opt_win %d final_win %d waste_win %d st_win_skew %d end_win_skew %d cur_st_win_max %d cur_end_win_min %d bus_st_win %d bus_end_win %d\n", + pattern_id, if_id, bus_id, opt_window, + final_pup_window[if_id][bus_id], + waste_window, start_window_skew, + end_window_skew, + cur_start_win_max, + cur_end_win_min, + bus_start_window[mode][if_id][bus_id], + bus_end_window[mode][if_id][bus_id])); + + /* check if window is valid */ + if (ddr3_tip_centr_skip_min_win_check == 0) { + if ((VALIDATE_WIN_LENGTH + (bus_start_window[mode][if_id] + [bus_id], + bus_end_window[mode][if_id] + [bus_id], + max_win_size) == 1) || + (IS_WINDOW_OUT_BOUNDARY + (bus_start_window[mode][if_id] + [bus_id], + bus_end_window[mode][if_id] + [bus_id], + max_win_size) == 1)) { + DEBUG_CENTRALIZATION_ENGINE + (DEBUG_LEVEL_INFO, + ("win valid, pat %d IF %d pup %d\n", + pattern_id, if_id, + bus_id)); + /* window is valid */ + } else { + DEBUG_CENTRALIZATION_ENGINE + (DEBUG_LEVEL_INFO, + ("fail win, pat %d IF %d pup %d bus_st_win %d bus_end_win %d\n", + pattern_id, if_id, bus_id, + bus_start_window[mode] + [if_id][bus_id], + bus_end_window[mode] + [if_id][bus_id])); + centralization_state[if_id] + [bus_id] = 1; + if (debug_mode == 0) + return MV_FAIL; + } + } /* ddr3_tip_centr_skip_min_win_check */ + } /* pup */ + } /* interface */ + } /* pattern */ + + for (if_id = start_if; if_id <= end_if; if_id++) { + if (IS_ACTIVE(tm->if_act_mask, if_id) == 0) + continue; + + is_if_fail = 0; + flow_result[if_id] = TEST_SUCCESS; + + for (bus_id = 0; + bus_id <= (tm->num_of_bus_per_interface - 1); bus_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + + /* continue only if lock */ + if (centralization_state[if_id][bus_id] != 1) { + if (ddr3_tip_centr_skip_min_win_check == 0) { + if ((bus_end_window + [mode][if_id][bus_id] == + (max_win_size - 1)) && + ((bus_end_window + [mode][if_id][bus_id] - + bus_start_window[mode][if_id] + [bus_id]) < MIN_WINDOW_SIZE) && + ((bus_end_window[mode][if_id] + [bus_id] - bus_start_window + [mode][if_id][bus_id]) > 2)) { + /* prevent false lock */ + /* TBD change to enum */ + centralization_state + [if_id][bus_id] = 2; + } + + if ((bus_end_window[mode][if_id][bus_id] + == 0) && + ((bus_end_window[mode][if_id] + [bus_id] - + bus_start_window[mode][if_id] + [bus_id]) < MIN_WINDOW_SIZE) && + ((bus_end_window[mode][if_id] + [bus_id] - + bus_start_window[mode][if_id] + [bus_id]) > 2)) + /*prevent false lock */ + centralization_state[if_id] + [bus_id] = 3; + } + + if ((bus_end_window[mode][if_id][bus_id] > + (max_win_size - 1)) && direction == + OPER_WRITE) { + DEBUG_CENTRALIZATION_ENGINE + (DEBUG_LEVEL_INFO, + ("Tx special pattern\n")); + cons_tap = 64; + } + } + + /* check states */ + if (centralization_state[if_id][bus_id] == 3) { + DEBUG_CENTRALIZATION_ENGINE( + DEBUG_LEVEL_INFO, + ("SSW - TBD IF %d pup %d\n", + if_id, bus_id)); + lock_success = 1; + } else if (centralization_state[if_id][bus_id] == 2) { + DEBUG_CENTRALIZATION_ENGINE( + DEBUG_LEVEL_INFO, + ("SEW - TBD IF %d pup %d\n", + if_id, bus_id)); + lock_success = 1; + } else if (centralization_state[if_id][bus_id] == 0) { + lock_success = 1; + } else { + DEBUG_CENTRALIZATION_ENGINE( + DEBUG_LEVEL_ERROR, + ("fail, IF %d pup %d\n", + if_id, bus_id)); + lock_success = 0; + } + + if (lock_success == 1) { + centralization_result[if_id][bus_id] = + (bus_end_window[mode][if_id][bus_id] + + bus_start_window[mode][if_id][bus_id]) + / 2 - cons_tap; + DEBUG_CENTRALIZATION_ENGINE( + DEBUG_LEVEL_TRACE, + (" bus_id %d Res= %d\n", bus_id, + centralization_result[if_id][bus_id])); + /* copy results to registers */ + pup_win_length = + bus_end_window[mode][if_id][bus_id] - + bus_start_window[mode][if_id][bus_id] + + 1; + + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, bus_id, + DDR_PHY_DATA, + RESULT_DB_PHY_REG_ADDR + + effective_cs, ®); + reg = (reg & (~0x1f << + ((mode == CENTRAL_TX) ? + (RESULT_DB_PHY_REG_TX_OFFSET) : + (RESULT_DB_PHY_REG_RX_OFFSET)))) + | pup_win_length << + ((mode == CENTRAL_TX) ? + (RESULT_DB_PHY_REG_TX_OFFSET) : + (RESULT_DB_PHY_REG_RX_OFFSET)); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, + bus_id, DDR_PHY_DATA, + RESULT_DB_PHY_REG_ADDR + + effective_cs, reg)); + + /* offset per CS is calculated earlier */ + CHECK_STATUS( + ddr3_tip_bus_write(dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, + bus_id, + DDR_PHY_DATA, + reg_phy_off, + centralization_result + [if_id] + [bus_id])); + } else { + is_if_fail = 1; + } + } + + if (is_if_fail == 1) + flow_result[if_id] = TEST_FAILED; + } + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + /* restore cs enable value */ + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, + if_id, CS_ENABLE_REG, + cs_enable_reg_val[if_id], + MASK_ALL_BITS)); + } + + return is_if_fail; +} + +/* + * Centralization Flow + */ +int ddr3_tip_special_rx(u32 dev_num) +{ + enum hws_training_ip_stat training_result[MAX_INTERFACE_NUM]; + u32 if_id, pup_id, pattern_id, bit_id; + u8 cur_start_win[BUS_WIDTH_IN_BITS]; + u8 cur_end_win[BUS_WIDTH_IN_BITS]; + enum hws_training_result result_type = RESULT_PER_BIT; + enum hws_dir direction; + enum hws_search_dir search_dir_id; + u32 *result[HWS_SEARCH_DIR_LIMIT]; + u32 max_win_size; + u8 cur_end_win_min, cur_start_win_max; + u32 cs_enable_reg_val[MAX_INTERFACE_NUM]; + u32 temp = 0; + int pad_num = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (ddr3_tip_special_rx_run_once_flag != 0) + return MV_OK; + + ddr3_tip_special_rx_run_once_flag = 1; + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + /* save current cs enable reg val */ + CHECK_STATUS(ddr3_tip_if_read(dev_num, ACCESS_TYPE_UNICAST, + if_id, CS_ENABLE_REG, + cs_enable_reg_val, + MASK_ALL_BITS)); + /* enable single cs */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, + if_id, CS_ENABLE_REG, + (1 << 3), (1 << 3))); + } + + max_win_size = MAX_WINDOW_SIZE_RX; + direction = OPER_READ; + pattern_id = PATTERN_VREF; + + /* start flow */ + ddr3_tip_ip_training_wrapper(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, result_type, + HWS_CONTROL_ELEMENT_ADLL, + PARAM_NOT_CARE, direction, + tm->if_act_mask, 0x0, + max_win_size - 1, max_win_size - 1, + pattern_id, EDGE_FPF, CS_SINGLE, + PARAM_NOT_CARE, training_result); + + for (if_id = start_if; if_id <= end_if; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (pup_id = 0; + pup_id <= tm->num_of_bus_per_interface; pup_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup_id); + + for (search_dir_id = HWS_LOW2HIGH; + search_dir_id <= HWS_HIGH2LOW; + search_dir_id++) { + CHECK_STATUS(ddr3_tip_read_training_result + (dev_num, if_id, + ACCESS_TYPE_UNICAST, pup_id, + ALL_BITS_PER_PUP, search_dir_id, + direction, result_type, + TRAINING_LOAD_OPERATION_UNLOAD, + CS_SINGLE, &result[search_dir_id], + 1, 0, 0)); + DEBUG_CENTRALIZATION_ENGINE(DEBUG_LEVEL_INFO, + ("Special: pat %d IF %d pup %d Regs: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", + pattern_id, if_id, + pup_id, + result + [search_dir_id][0], + result + [search_dir_id][1], + result + [search_dir_id][2], + result + [search_dir_id][3], + result + [search_dir_id][4], + result + [search_dir_id][5], + result + [search_dir_id][6], + result + [search_dir_id] + [7])); + } + + for (bit_id = 0; bit_id < BUS_WIDTH_IN_BITS; bit_id++) { + /* + * check if this code is valid for 2 edge, + * probably not :( + */ + cur_start_win[bit_id] = + GET_TAP_RESULT(result[HWS_LOW2HIGH] + [bit_id], EDGE_1); + cur_end_win[bit_id] = + GET_TAP_RESULT(result[HWS_HIGH2LOW] + [bit_id], EDGE_1); + } + if (!((ddr3_tip_is_pup_lock + (result[HWS_LOW2HIGH], result_type)) && + (ddr3_tip_is_pup_lock + (result[HWS_HIGH2LOW], result_type)))) { + DEBUG_CENTRALIZATION_ENGINE( + DEBUG_LEVEL_ERROR, + ("Special: Pup lock fail, pat %d IF %d pup %d\n", + pattern_id, if_id, pup_id)); + return MV_FAIL; + } + + cur_end_win_min = + ddr3_tip_get_buf_min(cur_end_win); + cur_start_win_max = + ddr3_tip_get_buf_max(cur_start_win); + + if (cur_start_win_max <= 1) { /* Align left */ + for (bit_id = 0; bit_id < BUS_WIDTH_IN_BITS; + bit_id++) { + pad_num = + dq_map_table[bit_id + + pup_id * + BUS_WIDTH_IN_BITS + + if_id * + BUS_WIDTH_IN_BITS * + tm-> + num_of_bus_per_interface]; + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, + pup_id, DDR_PHY_DATA, + PBS_RX_PHY_REG + pad_num, + &temp)); + temp = (temp + 0xa > 31) ? + (31) : (temp + 0xa); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, + pup_id, DDR_PHY_DATA, + PBS_RX_PHY_REG + pad_num, + temp)); + } + DEBUG_CENTRALIZATION_ENGINE( + DEBUG_LEVEL_INFO, + ("Special: PBS:: I/F# %d , Bus# %d fix align to the Left\n", + if_id, pup_id)); + } + + if (cur_end_win_min > 30) { /* Align right */ + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, pup_id, + DDR_PHY_DATA, PBS_RX_PHY_REG + 4, + &temp)); + temp += 0xa; + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, + pup_id, DDR_PHY_DATA, + PBS_RX_PHY_REG + 4, temp)); + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, pup_id, + DDR_PHY_DATA, PBS_RX_PHY_REG + 5, + &temp)); + temp += 0xa; + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, + pup_id, DDR_PHY_DATA, + PBS_RX_PHY_REG + 5, temp)); + DEBUG_CENTRALIZATION_ENGINE( + DEBUG_LEVEL_INFO, + ("Special: PBS:: I/F# %d , Bus# %d fix align to the right\n", + if_id, pup_id)); + } + + vref_window_size[if_id][pup_id] = + cur_end_win_min - + cur_start_win_max + 1; + DEBUG_CENTRALIZATION_ENGINE( + DEBUG_LEVEL_INFO, + ("Special: Winsize I/F# %d , Bus# %d is %d\n", + if_id, pup_id, vref_window_size + [if_id][pup_id])); + } /* pup */ + } /* end of interface */ + + return MV_OK; +} + +/* + * Print Centralization Result + */ +int ddr3_tip_print_centralization_result(u32 dev_num) +{ + u32 if_id = 0, bus_id = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + dev_num = dev_num; + + printf("Centralization Results\n"); + printf("I/F0 Result[0 - success 1-fail 2 - state_2 3 - state_3] ...\n"); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; + bus_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + printf("%d ,\n", centralization_state[if_id][bus_id]); + } + } + + return MV_OK; +} diff --git a/drivers/ddr/marvell/a38x/ddr3_training_db.c b/drivers/ddr/marvell/a38x/ddr3_training_db.c new file mode 100644 index 0000000..861dfb1 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_db.c @@ -0,0 +1,652 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +/* List of allowed frequency listed in order of enum hws_ddr_freq */ +u32 freq_val[DDR_FREQ_LIMIT] = { + 0, /*DDR_FREQ_LOW_FREQ */ + 400, /*DDR_FREQ_400, */ + 533, /*DDR_FREQ_533, */ + 666, /*DDR_FREQ_667, */ + 800, /*DDR_FREQ_800, */ + 933, /*DDR_FREQ_933, */ + 1066, /*DDR_FREQ_1066, */ + 311, /*DDR_FREQ_311, */ + 333, /*DDR_FREQ_333, */ + 467, /*DDR_FREQ_467, */ + 850, /*DDR_FREQ_850, */ + 600, /*DDR_FREQ_600 */ + 300, /*DDR_FREQ_300 */ + 900, /*DDR_FREQ_900 */ + 360, /*DDR_FREQ_360 */ + 1000 /*DDR_FREQ_1000 */ +}; + +/* Table for CL values per frequency for each speed bin index */ +struct cl_val_per_freq cas_latency_table[] = { + /* + * 400M 667M 933M 311M 467M 600M 360 + * 100M 533M 800M 1066M 333M 850M 900 + * 1000 (the order is 100, 400, 533 etc.) + */ + /* DDR3-800D */ + { {6, 5, 0, 0, 0, 0, 0, 5, 5, 0, 0, 0, 5, 0, 5, 0} }, + /* DDR3-800E */ + { {6, 6, 0, 0, 0, 0, 0, 6, 6, 0, 0, 0, 6, 0, 6, 0} }, + /* DDR3-1066E */ + { {6, 5, 6, 0, 0, 0, 0, 5, 5, 6, 0, 0, 5, 0, 5, 0} }, + /* DDR3-1066F */ + { {6, 6, 7, 0, 0, 0, 0, 6, 6, 7, 0, 0, 6, 0, 6, 0} }, + /* DDR3-1066G */ + { {6, 6, 8, 0, 0, 0, 0, 6, 6, 8, 0, 0, 6, 0, 6, 0} }, + /* DDR3-1333F* */ + { {6, 5, 6, 7, 0, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1333G */ + { {6, 5, 7, 8, 0, 0, 0, 5, 5, 7, 0, 8, 5, 0, 5, 0} }, + /* DDR3-1333H */ + { {6, 6, 8, 9, 0, 0, 0, 6, 6, 8, 0, 9, 6, 0, 6, 0} }, + /* DDR3-1333J* */ + { {6, 6, 8, 10, 0, 0, 0, 6, 6, 8, 0, 10, 6, 0, 6, 0} + /* DDR3-1600G* */}, + { {6, 5, 6, 7, 8, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1600H */ + { {6, 5, 6, 8, 9, 0, 0, 5, 5, 6, 0, 8, 5, 0, 5, 0} }, + /* DDR3-1600J */ + { {6, 5, 7, 9, 10, 0, 0, 5, 5, 7, 0, 9, 5, 0, 5, 0} }, + /* DDR3-1600K */ + { {6, 6, 8, 10, 11, 0, 0, 6, 6, 8, 0, 10, 6, 0, 6, 0 } }, + /* DDR3-1866J* */ + { {6, 5, 6, 8, 9, 11, 0, 5, 5, 6, 11, 8, 5, 0, 5, 0} }, + /* DDR3-1866K */ + { {6, 5, 7, 8, 10, 11, 0, 5, 5, 7, 11, 8, 5, 11, 5, 11} }, + /* DDR3-1866L */ + { {6, 6, 7, 9, 11, 12, 0, 6, 6, 7, 12, 9, 6, 12, 6, 12} }, + /* DDR3-1866M* */ + { {6, 6, 8, 10, 11, 13, 0, 6, 6, 8, 13, 10, 6, 13, 6, 13} }, + /* DDR3-2133K* */ + { {6, 5, 6, 7, 9, 10, 11, 5, 5, 6, 10, 7, 5, 11, 5, 11} }, + /* DDR3-2133L */ + { {6, 5, 6, 8, 9, 11, 12, 5, 5, 6, 11, 8, 5, 12, 5, 12} }, + /* DDR3-2133M */ + { {6, 5, 7, 9, 10, 12, 13, 5, 5, 7, 12, 9, 5, 13, 5, 13} }, + /* DDR3-2133N* */ + { {6, 6, 7, 9, 11, 13, 14, 6, 6, 7, 13, 9, 6, 14, 6, 14} }, + /* DDR3-1333H-ext */ + { {6, 6, 7, 9, 0, 0, 0, 6, 6, 7, 0, 9, 6, 0, 6, 0} }, + /* DDR3-1600K-ext */ + { {6, 6, 7, 9, 11, 0, 0, 6, 6, 7, 0, 9, 6, 0, 6, 0} }, + /* DDR3-1866M-ext */ + { {6, 6, 7, 9, 11, 13, 0, 6, 6, 7, 13, 9, 6, 13, 6, 13} }, +}; + +/* Table for CWL values per speedbin index */ +struct cl_val_per_freq cas_write_latency_table[] = { + /* + * 400M 667M 933M 311M 467M 600M 360 + * 100M 533M 800M 1066M 333M 850M 900 + * (the order is 100, 400, 533 etc.) + */ + /* DDR3-800D */ + { {5, 5, 0, 0, 0, 0, 0, 5, 5, 0, 0, 0, 5, 0, 5, 0} }, + /* DDR3-800E */ + { {5, 5, 0, 0, 0, 0, 0, 5, 5, 0, 0, 0, 5, 0, 5, 0} }, + /* DDR3-1066E */ + { {5, 5, 6, 0, 0, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1066F */ + { {5, 5, 6, 0, 0, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1066G */ + { {5, 5, 6, 0, 0, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1333F* */ + { {5, 5, 6, 7, 0, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1333G */ + { {5, 5, 6, 7, 0, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1333H */ + { {5, 5, 6, 7, 0, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1333J* */ + { {5, 5, 6, 7, 0, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1600G* */ + { {5, 5, 6, 7, 8, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1600H */ + { {5, 5, 6, 7, 8, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1600J */ + { {5, 5, 6, 7, 8, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1600K */ + { {5, 5, 6, 7, 8, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1866J* */ + { {5, 5, 6, 7, 8, 9, 0, 5, 5, 6, 9, 7, 5, 0, 5, 0} }, + /* DDR3-1866K */ + { {5, 5, 6, 7, 8, 9, 0, 5, 5, 6, 9, 7, 5, 0, 5, 0} }, + /* DDR3-1866L */ + { {5, 5, 6, 7, 8, 9, 0, 5, 5, 6, 9, 7, 5, 9, 5, 9} }, + /* DDR3-1866M* */ + { {5, 5, 6, 7, 8, 9, 0, 5, 5, 6, 9, 7, 5, 9, 5, 9} }, + /* DDR3-2133K* */ + { {5, 5, 6, 7, 8, 9, 10, 5, 5, 6, 9, 7, 5, 9, 5, 10} }, + /* DDR3-2133L */ + { {5, 5, 6, 7, 8, 9, 10, 5, 5, 6, 9, 7, 5, 9, 5, 10} }, + /* DDR3-2133M */ + { {5, 5, 6, 7, 8, 9, 10, 5, 5, 6, 9, 7, 5, 9, 5, 10} }, + /* DDR3-2133N* */ + { {5, 5, 6, 7, 8, 9, 10, 5, 5, 6, 9, 7, 5, 9, 5, 10} }, + /* DDR3-1333H-ext */ + { {5, 5, 6, 7, 0, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1600K-ext */ + { {5, 5, 6, 7, 8, 0, 0, 5, 5, 6, 0, 7, 5, 0, 5, 0} }, + /* DDR3-1866M-ext */ + { {5, 5, 6, 7, 8, 9, 0, 5, 5, 6, 9, 7, 5, 9, 5, 9} }, +}; + +u8 twr_mask_table[] = { + 10, + 10, + 10, + 10, + 10, + 1, /*5 */ + 2, /*6 */ + 3, /*7 */ + 10, + 10, + 5, /*10 */ + 10, + 6, /*12 */ + 10, + 7, /*14 */ + 10, + 0 /*16 */ +}; + +u8 cl_mask_table[] = { + 0, + 0, + 0, + 0, + 0, + 0x2, + 0x4, + 0x6, + 0x8, + 0xa, + 0xc, + 0xe, + 0x1, + 0x3, + 0x5, + 0x5 +}; + +u8 cwl_mask_table[] = { + 0, + 0, + 0, + 0, + 0, + 0, + 0x1, + 0x2, + 0x3, + 0x4, + 0x5, + 0x6, + 0x7, + 0x8, + 0x9, + 0x9 +}; + +/* RFC values (in ns) */ +u16 rfc_table[] = { + 90, /* 512M */ + 110, /* 1G */ + 160, /* 2G */ + 260, /* 4G */ + 350 /* 8G */ +}; + +u32 speed_bin_table_t_rc[] = { + 50000, + 52500, + 48750, + 50625, + 52500, + 46500, + 48000, + 49500, + 51000, + 45000, + 46250, + 47500, + 48750, + 44700, + 45770, + 46840, + 47910, + 43285, + 44220, + 45155, + 46900 +}; + +u32 speed_bin_table_t_rcd_t_rp[] = { + 12500, + 15000, + 11250, + 13125, + 15000, + 10500, + 12000, + 13500, + 15000, + 10000, + 11250, + 12500, + 13750, + 10700, + 11770, + 12840, + 13910, + 10285, + 11022, + 12155, + 13090, +}; + +enum { + PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_AGGRESSOR = 0, + PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_VICTIM +}; + +static u8 pattern_killer_pattern_table_map[KILLER_PATTERN_LENGTH * 2][2] = { + /*Aggressor / Victim */ + {1, 0}, + {0, 0}, + {1, 0}, + {1, 1}, + {0, 1}, + {0, 1}, + {1, 0}, + {0, 1}, + {1, 0}, + {0, 1}, + {1, 0}, + {1, 0}, + {0, 1}, + {1, 0}, + {0, 1}, + {0, 0}, + {1, 1}, + {0, 0}, + {1, 1}, + {0, 0}, + {1, 1}, + {0, 0}, + {1, 1}, + {1, 0}, + {0, 0}, + {1, 1}, + {0, 0}, + {1, 1}, + {0, 0}, + {0, 0}, + {0, 0}, + {0, 1}, + {0, 1}, + {1, 1}, + {0, 0}, + {0, 0}, + {1, 1}, + {1, 1}, + {0, 0}, + {1, 1}, + {0, 0}, + {1, 1}, + {1, 1}, + {0, 0}, + {0, 0}, + {1, 1}, + {0, 0}, + {1, 1}, + {0, 1}, + {0, 0}, + {0, 1}, + {0, 1}, + {0, 0}, + {1, 1}, + {1, 1}, + {1, 0}, + {1, 0}, + {1, 1}, + {1, 1}, + {1, 1}, + {1, 1}, + {1, 1}, + {1, 1}, + {1, 1} +}; + +static u8 pattern_vref_pattern_table_map[] = { + /* 1 means 0xffffffff, 0 is 0x0 */ + 0xb8, + 0x52, + 0x55, + 0x8a, + 0x33, + 0xa6, + 0x6d, + 0xfe +}; + +/* Return speed Bin value for selected index and t* element */ +u32 speed_bin_table(u8 index, enum speed_bin_table_elements element) +{ + u32 result = 0; + + switch (element) { + case SPEED_BIN_TRCD: + case SPEED_BIN_TRP: + result = speed_bin_table_t_rcd_t_rp[index]; + break; + case SPEED_BIN_TRAS: + if (index < 6) + result = 37500; + else if (index < 10) + result = 36000; + else if (index < 14) + result = 35000; + else if (index < 18) + result = 34000; + else + result = 33000; + break; + case SPEED_BIN_TRC: + result = speed_bin_table_t_rc[index]; + break; + case SPEED_BIN_TRRD1K: + if (index < 3) + result = 10000; + else if (index < 6) + result = 7005; + else if (index < 14) + result = 6000; + else + result = 5000; + break; + case SPEED_BIN_TRRD2K: + if (index < 6) + result = 10000; + else if (index < 14) + result = 7005; + else + result = 6000; + break; + case SPEED_BIN_TPD: + if (index < 3) + result = 7500; + else if (index < 10) + result = 5625; + else + result = 5000; + break; + case SPEED_BIN_TFAW1K: + if (index < 3) + result = 40000; + else if (index < 6) + result = 37500; + else if (index < 14) + result = 30000; + else if (index < 18) + result = 27000; + else + result = 25000; + break; + case SPEED_BIN_TFAW2K: + if (index < 6) + result = 50000; + else if (index < 10) + result = 45000; + else if (index < 14) + result = 40000; + else + result = 35000; + break; + case SPEED_BIN_TWTR: + result = 7500; + break; + case SPEED_BIN_TRTP: + result = 7500; + break; + case SPEED_BIN_TWR: + result = 15000; + break; + case SPEED_BIN_TMOD: + result = 15000; + break; + default: + break; + } + + return result; +} + +static inline u32 pattern_table_get_killer_word(u8 dqs, u8 index) +{ + u8 i, byte = 0; + u8 role; + + for (i = 0; i < 8; i++) { + role = (i == dqs) ? + (PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_AGGRESSOR) : + (PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_VICTIM); + byte |= pattern_killer_pattern_table_map[index][role] << i; + } + + return byte | (byte << 8) | (byte << 16) | (byte << 24); +} + +static inline u32 pattern_table_get_killer_word16(u8 dqs, u8 index) +{ + u8 i, byte0 = 0, byte1 = 0; + u8 role; + + for (i = 0; i < 8; i++) { + role = (i == dqs) ? + (PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_AGGRESSOR) : + (PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_VICTIM); + byte0 |= pattern_killer_pattern_table_map[index * 2][role] << i; + } + + for (i = 0; i < 8; i++) { + role = (i == dqs) ? + (PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_AGGRESSOR) : + (PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_VICTIM); + byte1 |= pattern_killer_pattern_table_map + [index * 2 + 1][role] << i; + } + + return byte0 | (byte0 << 8) | (byte1 << 16) | (byte1 << 24); +} + +static inline u32 pattern_table_get_sso_word(u8 sso, u8 index) +{ + u8 step = sso + 1; + + if (0 == ((index / step) & 1)) + return 0x0; + else + return 0xffffffff; +} + +static inline u32 pattern_table_get_vref_word(u8 index) +{ + if (0 == ((pattern_vref_pattern_table_map[index / 8] >> + (index % 8)) & 1)) + return 0x0; + else + return 0xffffffff; +} + +static inline u32 pattern_table_get_vref_word16(u8 index) +{ + if (0 == pattern_killer_pattern_table_map + [PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_VICTIM][index * 2] && + 0 == pattern_killer_pattern_table_map + [PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_VICTIM][index * 2 + 1]) + return 0x00000000; + else if (1 == pattern_killer_pattern_table_map + [PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_VICTIM][index * 2] && + 0 == pattern_killer_pattern_table_map + [PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_VICTIM][index * 2 + 1]) + return 0xffff0000; + else if (0 == pattern_killer_pattern_table_map + [PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_VICTIM][index * 2] && + 1 == pattern_killer_pattern_table_map + [PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_VICTIM][index * 2 + 1]) + return 0x0000ffff; + else + return 0xffffffff; +} + +static inline u32 pattern_table_get_static_pbs_word(u8 index) +{ + u16 temp; + + temp = ((0x00ff << (index / 3)) & 0xff00) >> 8; + + return temp | (temp << 8) | (temp << 16) | (temp << 24); +} + +inline u32 pattern_table_get_word(u32 dev_num, enum hws_pattern type, u8 index) +{ + u32 pattern; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (DDR3_IS_16BIT_DRAM_MODE(tm->bus_act_mask) == 0) { + /* 32bit patterns */ + switch (type) { + case PATTERN_PBS1: + case PATTERN_PBS2: + if (index == 0 || index == 2 || index == 5 || + index == 7) + pattern = PATTERN_55; + else + pattern = PATTERN_AA; + break; + case PATTERN_PBS3: + if (0 == (index & 1)) + pattern = PATTERN_55; + else + pattern = PATTERN_AA; + break; + case PATTERN_RL: + if (index < 6) + pattern = PATTERN_00; + else + pattern = PATTERN_80; + break; + case PATTERN_STATIC_PBS: + pattern = pattern_table_get_static_pbs_word(index); + break; + case PATTERN_KILLER_DQ0: + case PATTERN_KILLER_DQ1: + case PATTERN_KILLER_DQ2: + case PATTERN_KILLER_DQ3: + case PATTERN_KILLER_DQ4: + case PATTERN_KILLER_DQ5: + case PATTERN_KILLER_DQ6: + case PATTERN_KILLER_DQ7: + pattern = pattern_table_get_killer_word( + (u8)(type - PATTERN_KILLER_DQ0), index); + break; + case PATTERN_RL2: + if (index < 6) + pattern = PATTERN_00; + else + pattern = PATTERN_01; + break; + case PATTERN_TEST: + if (index > 1 && index < 6) + pattern = PATTERN_20; + else + pattern = PATTERN_00; + break; + case PATTERN_FULL_SSO0: + case PATTERN_FULL_SSO1: + case PATTERN_FULL_SSO2: + case PATTERN_FULL_SSO3: + pattern = pattern_table_get_sso_word( + (u8)(type - PATTERN_FULL_SSO0), index); + break; + case PATTERN_VREF: + pattern = pattern_table_get_vref_word(index); + break; + default: + pattern = 0; + break; + } + } else { + /* 16bit patterns */ + switch (type) { + case PATTERN_PBS1: + case PATTERN_PBS2: + case PATTERN_PBS3: + pattern = PATTERN_55AA; + break; + case PATTERN_RL: + if (index < 3) + pattern = PATTERN_00; + else + pattern = PATTERN_80; + break; + case PATTERN_STATIC_PBS: + pattern = PATTERN_00FF; + break; + case PATTERN_KILLER_DQ0: + case PATTERN_KILLER_DQ1: + case PATTERN_KILLER_DQ2: + case PATTERN_KILLER_DQ3: + case PATTERN_KILLER_DQ4: + case PATTERN_KILLER_DQ5: + case PATTERN_KILLER_DQ6: + case PATTERN_KILLER_DQ7: + pattern = pattern_table_get_killer_word16( + (u8)(type - PATTERN_KILLER_DQ0), index); + break; + case PATTERN_RL2: + if (index < 3) + pattern = PATTERN_00; + else + pattern = PATTERN_01; + break; + case PATTERN_TEST: + pattern = PATTERN_0080; + break; + case PATTERN_FULL_SSO0: + pattern = 0x0000ffff; + break; + case PATTERN_FULL_SSO1: + case PATTERN_FULL_SSO2: + case PATTERN_FULL_SSO3: + pattern = pattern_table_get_sso_word( + (u8)(type - PATTERN_FULL_SSO1), index); + break; + case PATTERN_VREF: + pattern = pattern_table_get_vref_word16(index); + break; + default: + pattern = 0; + break; + } + } + + return pattern; +} diff --git a/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c b/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c new file mode 100644 index 0000000..56fce17 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c @@ -0,0 +1,686 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +#define VREF_INITIAL_STEP 3 +#define VREF_SECOND_STEP 1 +#define VREF_MAX_INDEX 7 +#define MAX_VALUE (1024 - 1) +#define MIN_VALUE (-MAX_VALUE) +#define GET_RD_SAMPLE_DELAY(data, cs) ((data >> rd_sample_mask[cs]) & 0xf) + +u32 ck_delay = (u32)-1, ck_delay_16 = (u32)-1; +u32 ca_delay; +int ddr3_tip_centr_skip_min_win_check = 0; +u8 current_vref[MAX_BUS_NUM][MAX_INTERFACE_NUM]; +u8 last_vref[MAX_BUS_NUM][MAX_INTERFACE_NUM]; +u16 current_valid_window[MAX_BUS_NUM][MAX_INTERFACE_NUM]; +u16 last_valid_window[MAX_BUS_NUM][MAX_INTERFACE_NUM]; +u8 lim_vref[MAX_BUS_NUM][MAX_INTERFACE_NUM]; +u8 interface_state[MAX_INTERFACE_NUM]; +u8 vref_window_size[MAX_INTERFACE_NUM][MAX_BUS_NUM]; +u8 vref_window_size_th = 12; + +static u8 pup_st[MAX_BUS_NUM][MAX_INTERFACE_NUM]; + +static u32 rd_sample_mask[] = { + 0, + 8, + 16, + 24 +}; + +#define VREF_STEP_1 0 +#define VREF_STEP_2 1 +#define VREF_CONVERGE 2 + +/* + * ODT additional timing + */ +int ddr3_tip_write_additional_odt_setting(u32 dev_num, u32 if_id) +{ + u32 cs_num = 0, max_read_sample = 0, min_read_sample = 0; + u32 data_read[MAX_INTERFACE_NUM] = { 0 }; + u32 read_sample[MAX_CS_NUM]; + u32 val; + u32 pup_index; + int max_phase = MIN_VALUE, current_phase; + enum hws_access_type access_type = ACCESS_TYPE_UNICAST; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + DUNIT_ODT_CONTROL_REG, + 0 << 8, 0x3 << 8)); + CHECK_STATUS(ddr3_tip_if_read(dev_num, access_type, if_id, + READ_DATA_SAMPLE_DELAY, + data_read, MASK_ALL_BITS)); + val = data_read[if_id]; + + for (cs_num = 0; cs_num < MAX_CS_NUM; cs_num++) { + read_sample[cs_num] = GET_RD_SAMPLE_DELAY(val, cs_num); + + /* find maximum of read_samples */ + if (read_sample[cs_num] >= max_read_sample) { + if (read_sample[cs_num] == max_read_sample) + max_phase = MIN_VALUE; + else + max_read_sample = read_sample[cs_num]; + + for (pup_index = 0; + pup_index < tm->num_of_bus_per_interface; + pup_index++) { + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, pup_index, + DDR_PHY_DATA, + RL_PHY_REG + CS_REG_VALUE(cs_num), + &val)); + + current_phase = ((int)val & 0xe0) >> 6; + if (current_phase >= max_phase) + max_phase = current_phase; + } + } + + /* find minimum */ + if (read_sample[cs_num] < min_read_sample) + min_read_sample = read_sample[cs_num]; + } + + min_read_sample = min_read_sample - 1; + max_read_sample = max_read_sample + 4 + (max_phase + 1) / 2 + 1; + if (min_read_sample >= 0xf) + min_read_sample = 0xf; + if (max_read_sample >= 0x1f) + max_read_sample = 0x1f; + + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + ODT_TIMING_LOW, + ((min_read_sample - 1) << 12), + 0xf << 12)); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + ODT_TIMING_LOW, + (max_read_sample << 16), + 0x1f << 16)); + + return MV_OK; +} + +int get_valid_win_rx(u32 dev_num, u32 if_id, u8 res[4]) +{ + u32 reg_pup = RESULT_DB_PHY_REG_ADDR; + u32 reg_data; + u32 cs_num; + int i; + + cs_num = 0; + + /* TBD */ + reg_pup += cs_num; + + for (i = 0; i < 4; i++) { + CHECK_STATUS(ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, i, + DDR_PHY_DATA, reg_pup, + ®_data)); + res[i] = (reg_data >> RESULT_DB_PHY_REG_RX_OFFSET) & 0x1f; + } + + return 0; +} + +/* + * This algorithm deals with the vertical optimum from Voltage point of view + * of the sample signal. + * Voltage sample point can improve the Eye / window size of the bit and the + * pup. + * The problem is that it is tune for all DQ the same so there isn't any + * PBS like code. + * It is more like centralization. + * But because we don't have The training SM support we do it a bit more + * smart search to save time. + */ +int ddr3_tip_vref(u32 dev_num) +{ + /* + * The Vref register have non linear order. Need to check what will be + * in future projects. + */ + u32 vref_map[8] = { + 1, 2, 3, 4, 5, 6, 7, 0 + }; + /* State and parameter definitions */ + u32 initial_step = VREF_INITIAL_STEP; + /* need to be assign with minus ????? */ + u32 second_step = VREF_SECOND_STEP; + u32 algo_run_flag = 0, currrent_vref = 0; + u32 while_count = 0; + u32 pup = 0, if_id = 0, num_pup = 0, rep = 0; + u32 val = 0; + u32 reg_addr = 0xa8; + u32 copy_start_pattern, copy_end_pattern; + enum hws_result *flow_result = ddr3_tip_get_result_ptr(training_stage); + u8 res[4]; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + CHECK_STATUS(ddr3_tip_special_rx(dev_num)); + + /* save start/end pattern */ + copy_start_pattern = start_pattern; + copy_end_pattern = end_pattern; + + /* set vref as centralization pattern */ + start_pattern = PATTERN_VREF; + end_pattern = PATTERN_VREF; + + /* init params */ + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (pup = 0; + pup < tm->num_of_bus_per_interface; pup++) { + current_vref[pup][if_id] = 0; + last_vref[pup][if_id] = 0; + lim_vref[pup][if_id] = 0; + current_valid_window[pup][if_id] = 0; + last_valid_window[pup][if_id] = 0; + if (vref_window_size[if_id][pup] > + vref_window_size_th) { + pup_st[pup][if_id] = VREF_CONVERGE; + DEBUG_TRAINING_HW_ALG( + DEBUG_LEVEL_INFO, + ("VREF config, IF[ %d ]pup[ %d ] - Vref tune not requered (%d)\n", + if_id, pup, __LINE__)); + } else { + pup_st[pup][if_id] = VREF_STEP_1; + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, &val)); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, + pup, DDR_PHY_DATA, reg_addr, + (val & (~0xf)) | vref_map[0])); + DEBUG_TRAINING_HW_ALG( + DEBUG_LEVEL_INFO, + ("VREF config, IF[ %d ]pup[ %d ] - Vref = %X (%d)\n", + if_id, pup, + (val & (~0xf)) | vref_map[0], + __LINE__)); + } + } + interface_state[if_id] = 0; + } + + /* TODO: Set number of active interfaces */ + num_pup = tm->num_of_bus_per_interface * MAX_INTERFACE_NUM; + + while ((algo_run_flag <= num_pup) & (while_count < 10)) { + while_count++; + for (rep = 1; rep < 4; rep++) { + ddr3_tip_centr_skip_min_win_check = 1; + ddr3_tip_centralization_rx(dev_num); + ddr3_tip_centr_skip_min_win_check = 0; + + /* Read Valid window results only for non converge pups */ + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + if (interface_state[if_id] != 4) { + get_valid_win_rx(dev_num, if_id, res); + for (pup = 0; + pup < tm->num_of_bus_per_interface; + pup++) { + VALIDATE_ACTIVE + (tm->bus_act_mask, pup); + if (pup_st[pup] + [if_id] == + VREF_CONVERGE) + continue; + + current_valid_window[pup] + [if_id] = + (current_valid_window[pup] + [if_id] * (rep - 1) + + 1000 * res[pup]) / rep; + } + } + } + } + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + DEBUG_TRAINING_HW_ALG( + DEBUG_LEVEL_TRACE, + ("current_valid_window: IF[ %d ] - ", if_id)); + + for (pup = 0; + pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + DEBUG_TRAINING_HW_ALG(DEBUG_LEVEL_TRACE, + ("%d ", + current_valid_window + [pup][if_id])); + } + DEBUG_TRAINING_HW_ALG(DEBUG_LEVEL_TRACE, ("\n")); + } + + /* Compare results and respond as function of state */ + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (pup = 0; + pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + DEBUG_TRAINING_HW_ALG(DEBUG_LEVEL_TRACE, + ("I/F[ %d ], pup[ %d ] STATE #%d (%d)\n", + if_id, pup, + pup_st[pup] + [if_id], __LINE__)); + + if (pup_st[pup][if_id] == VREF_CONVERGE) + continue; + + DEBUG_TRAINING_HW_ALG(DEBUG_LEVEL_TRACE, + ("I/F[ %d ], pup[ %d ] CHECK progress - Current %d Last %d, limit VREF %d (%d)\n", + if_id, pup, + current_valid_window[pup] + [if_id], + last_valid_window[pup] + [if_id], lim_vref[pup] + [if_id], __LINE__)); + + /* + * The -1 is for solution resolution +/- 1 tap + * of ADLL + */ + if (current_valid_window[pup][if_id] + 200 >= + (last_valid_window[pup][if_id])) { + if (pup_st[pup][if_id] == VREF_STEP_1) { + /* + * We stay in the same state and + * step just update the window + * size (take the max) and Vref + */ + if (current_vref[pup] + [if_id] == VREF_MAX_INDEX) { + /* + * If we step to the end + * and didn't converge + * to some particular + * better Vref value + * define the pup as + * converge and step + * back to nominal + * Vref. + */ + pup_st[pup] + [if_id] = + VREF_CONVERGE; + algo_run_flag++; + interface_state + [if_id]++; + DEBUG_TRAINING_HW_ALG + (DEBUG_LEVEL_TRACE, + ("I/F[ %d ], pup[ %d ] VREF_CONVERGE - Vref = %X (%d)\n", + if_id, pup, + current_vref[pup] + [if_id], + __LINE__)); + } else { + /* continue to update the Vref index */ + current_vref[pup] + [if_id] = + ((current_vref[pup] + [if_id] + + initial_step) > + VREF_MAX_INDEX) ? + VREF_MAX_INDEX + : (current_vref[pup] + [if_id] + + initial_step); + if (current_vref[pup] + [if_id] == + VREF_MAX_INDEX) { + pup_st[pup] + [if_id] + = + VREF_STEP_2; + } + lim_vref[pup] + [if_id] = + last_vref[pup] + [if_id] = + current_vref[pup] + [if_id]; + } + + last_valid_window[pup] + [if_id] = + GET_MAX(current_valid_window + [pup][if_id], + last_valid_window + [pup] + [if_id]); + + /* update the Vref for next stage */ + currrent_vref = + current_vref[pup] + [if_id]; + CHECK_STATUS + (ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + &val)); + CHECK_STATUS + (ddr3_tip_bus_write + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + (val & (~0xf)) | + vref_map[currrent_vref])); + DEBUG_TRAINING_HW_ALG + (DEBUG_LEVEL_TRACE, + ("VREF config, IF[ %d ]pup[ %d ] - Vref = %X (%d)\n", + if_id, pup, + (val & (~0xf)) | + vref_map[currrent_vref], + __LINE__)); + } else if (pup_st[pup][if_id] + == VREF_STEP_2) { + /* + * We keep on search back with + * the same step size. + */ + last_valid_window[pup] + [if_id] = + GET_MAX(current_valid_window + [pup][if_id], + last_valid_window + [pup] + [if_id]); + last_vref[pup][if_id] = + current_vref[pup] + [if_id]; + + /* we finish all search space */ + if ((current_vref[pup] + [if_id] - second_step) == lim_vref[pup][if_id]) { + /* + * If we step to the end + * and didn't converge + * to some particular + * better Vref value + * define the pup as + * converge and step + * back to nominal + * Vref. + */ + pup_st[pup] + [if_id] = + VREF_CONVERGE; + algo_run_flag++; + + interface_state + [if_id]++; + + current_vref[pup] + [if_id] = + (current_vref[pup] + [if_id] - + second_step); + + DEBUG_TRAINING_HW_ALG + (DEBUG_LEVEL_TRACE, + ("I/F[ %d ], pup[ %d ] VREF_CONVERGE - Vref = %X (%d)\n", + if_id, pup, + current_vref[pup] + [if_id], + __LINE__)); + } else + /* we finish all search space */ + if (current_vref[pup] + [if_id] == + lim_vref[pup] + [if_id]) { + /* + * If we step to the end + * and didn't converge + * to some particular + * better Vref value + * define the pup as + * converge and step + * back to nominal + * Vref. + */ + pup_st[pup] + [if_id] = + VREF_CONVERGE; + + algo_run_flag++; + interface_state + [if_id]++; + DEBUG_TRAINING_HW_ALG + (DEBUG_LEVEL_TRACE, + ("I/F[ %d ], pup[ %d ] VREF_CONVERGE - Vref = %X (%d)\n", + if_id, pup, + current_vref[pup] + [if_id], + __LINE__)); + } else { + current_vref[pup] + [if_id] = + current_vref[pup] + [if_id] - + second_step; + } + + /* Update the Vref for next stage */ + currrent_vref = + current_vref[pup] + [if_id]; + CHECK_STATUS + (ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + &val)); + CHECK_STATUS + (ddr3_tip_bus_write + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + (val & (~0xf)) | + vref_map[currrent_vref])); + DEBUG_TRAINING_HW_ALG + (DEBUG_LEVEL_TRACE, + ("VREF config, IF[ %d ]pup[ %d ] - Vref = %X (%d)\n", + if_id, pup, + (val & (~0xf)) | + vref_map[currrent_vref], + __LINE__)); + } + } else { + /* we change state and change step */ + if (pup_st[pup][if_id] == VREF_STEP_1) { + pup_st[pup][if_id] = + VREF_STEP_2; + lim_vref[pup][if_id] = + current_vref[pup] + [if_id] - initial_step; + last_valid_window[pup] + [if_id] = + current_valid_window[pup] + [if_id]; + last_vref[pup][if_id] = + current_vref[pup] + [if_id]; + current_vref[pup][if_id] = + last_vref[pup][if_id] - + second_step; + + /* Update the Vref for next stage */ + CHECK_STATUS + (ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + &val)); + CHECK_STATUS + (ddr3_tip_bus_write + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + (val & (~0xf)) | + vref_map[current_vref[pup] + [if_id]])); + DEBUG_TRAINING_HW_ALG + (DEBUG_LEVEL_TRACE, + ("VREF config, IF[ %d ]pup[ %d ] - Vref = %X (%d)\n", + if_id, pup, + (val & (~0xf)) | + vref_map[current_vref[pup] + [if_id]], + __LINE__)); + + } else if (pup_st[pup][if_id] == VREF_STEP_2) { + /* + * The last search was the max + * point set value and exit + */ + CHECK_STATUS + (ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + &val)); + CHECK_STATUS + (ddr3_tip_bus_write + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + (val & (~0xf)) | + vref_map[last_vref[pup] + [if_id]])); + DEBUG_TRAINING_HW_ALG + (DEBUG_LEVEL_TRACE, + ("VREF config, IF[ %d ]pup[ %d ] - Vref = %X (%d)\n", + if_id, pup, + (val & (~0xf)) | + vref_map[last_vref[pup] + [if_id]], + __LINE__)); + pup_st[pup][if_id] = + VREF_CONVERGE; + algo_run_flag++; + interface_state[if_id]++; + DEBUG_TRAINING_HW_ALG + (DEBUG_LEVEL_TRACE, + ("I/F[ %d ], pup[ %d ] VREF_CONVERGE - Vref = %X (%d)\n", + if_id, pup, + current_vref[pup] + [if_id], __LINE__)); + } + } + } + } + } + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (pup = 0; + pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, &val)); + DEBUG_TRAINING_HW_ALG( + DEBUG_LEVEL_INFO, + ("FINAL values: I/F[ %d ], pup[ %d ] - Vref = %X (%d)\n", + if_id, pup, val, __LINE__)); + } + } + + flow_result[if_id] = TEST_SUCCESS; + + /* restore start/end pattern */ + start_pattern = copy_start_pattern; + end_pattern = copy_end_pattern; + + return 0; +} + +/* + * CK/CA Delay + */ +int ddr3_tip_cmd_addr_init_delay(u32 dev_num, u32 adll_tap) +{ + u32 if_id = 0; + u32 ck_num_adll_tap = 0, ca_num_adll_tap = 0, data = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* + * ck_delay_table is delaying the of the clock signal only. + * (to overcome timing issues between_c_k & command/address signals) + */ + /* + * ca_delay is delaying the of the entire command & Address signals + * (include Clock signal to overcome DGL error on the Clock versus + * the DQS). + */ + + /* Calc ADLL Tap */ + if ((ck_delay == -1) || (ck_delay_16 == -1)) { + DEBUG_TRAINING_HW_ALG( + DEBUG_LEVEL_ERROR, + ("ERROR: One of ck_delay values not initialized!!!\n")); + } + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + /* Calc delay ps in ADLL tap */ + if (tm->interface_params[if_id].bus_width == + BUS_WIDTH_16) + ck_num_adll_tap = ck_delay_16 / adll_tap; + else + ck_num_adll_tap = ck_delay / adll_tap; + + ca_num_adll_tap = ca_delay / adll_tap; + data = (ck_num_adll_tap & 0x3f) + + ((ca_num_adll_tap & 0x3f) << 10); + + /* + * Set the ADLL number to the CK ADLL for Interfaces for + * all Pup + */ + DEBUG_TRAINING_HW_ALG( + DEBUG_LEVEL_TRACE, + ("ck_num_adll_tap %d ca_num_adll_tap %d adll_tap %d\n", + ck_num_adll_tap, ca_num_adll_tap, adll_tap)); + + CHECK_STATUS(ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, DDR_PHY_CONTROL, + 0x0, data)); + } + + return MV_OK; +} diff --git a/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.h b/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.h new file mode 100644 index 0000000..6e1bab2 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.h @@ -0,0 +1,14 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_TRAINING_HW_ALGO_H_ +#define _DDR3_TRAINING_HW_ALGO_H_ + +int ddr3_tip_vref(u32 dev_num); +int ddr3_tip_write_additional_odt_setting(u32 dev_num, u32 if_id); +int ddr3_tip_cmd_addr_init_delay(u32 dev_num, u32 adll_tap); + +#endif /* _DDR3_TRAINING_HW_ALGO_H_ */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip.h b/drivers/ddr/marvell/a38x/ddr3_training_ip.h new file mode 100644 index 0000000..76a1b6a --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip.h @@ -0,0 +1,180 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_TRAINING_IP_H_ +#define _DDR3_TRAINING_IP_H_ + +#include "ddr3_training_ip_def.h" +#include "ddr_topology_def.h" +#include "ddr_training_ip_db.h" + +#define DDR3_TIP_VERSION_STRING "DDR3 Training Sequence - Ver TIP-1.29." + +#define MAX_CS_NUM 4 +#define MAX_TOTAL_BUS_NUM (MAX_INTERFACE_NUM * MAX_BUS_NUM) +#define MAX_DQ_NUM 40 + +#define GET_MIN(arg1, arg2) ((arg1) < (arg2)) ? (arg1) : (arg2) +#define GET_MAX(arg1, arg2) ((arg1) < (arg2)) ? (arg2) : (arg1) + +#define INIT_CONTROLLER_MASK_BIT 0x00000001 +#define STATIC_LEVELING_MASK_BIT 0x00000002 +#define SET_LOW_FREQ_MASK_BIT 0x00000004 +#define LOAD_PATTERN_MASK_BIT 0x00000008 +#define SET_MEDIUM_FREQ_MASK_BIT 0x00000010 +#define WRITE_LEVELING_MASK_BIT 0x00000020 +#define LOAD_PATTERN_2_MASK_BIT 0x00000040 +#define READ_LEVELING_MASK_BIT 0x00000080 +#define SW_READ_LEVELING_MASK_BIT 0x00000100 +#define WRITE_LEVELING_SUPP_MASK_BIT 0x00000200 +#define PBS_RX_MASK_BIT 0x00000400 +#define PBS_TX_MASK_BIT 0x00000800 +#define SET_TARGET_FREQ_MASK_BIT 0x00001000 +#define ADJUST_DQS_MASK_BIT 0x00002000 +#define WRITE_LEVELING_TF_MASK_BIT 0x00004000 +#define LOAD_PATTERN_HIGH_MASK_BIT 0x00008000 +#define READ_LEVELING_TF_MASK_BIT 0x00010000 +#define WRITE_LEVELING_SUPP_TF_MASK_BIT 0x00020000 +#define DM_PBS_TX_MASK_BIT 0x00040000 +#define CENTRALIZATION_RX_MASK_BIT 0x00100000 +#define CENTRALIZATION_TX_MASK_BIT 0x00200000 +#define TX_EMPHASIS_MASK_BIT 0x00400000 +#define PER_BIT_READ_LEVELING_TF_MASK_BIT 0x00800000 +#define VREF_CALIBRATION_MASK_BIT 0x01000000 + +enum hws_result { + TEST_FAILED = 0, + TEST_SUCCESS = 1, + NO_TEST_DONE = 2 +}; + +enum hws_training_result { + RESULT_PER_BIT, + RESULT_PER_BYTE +}; + +enum auto_tune_stage { + INIT_CONTROLLER, + STATIC_LEVELING, + SET_LOW_FREQ, + LOAD_PATTERN, + SET_MEDIUM_FREQ, + WRITE_LEVELING, + LOAD_PATTERN_2, + READ_LEVELING, + WRITE_LEVELING_SUPP, + PBS_RX, + PBS_TX, + SET_TARGET_FREQ, + ADJUST_DQS, + WRITE_LEVELING_TF, + READ_LEVELING_TF, + WRITE_LEVELING_SUPP_TF, + DM_PBS_TX, + VREF_CALIBRATION, + CENTRALIZATION_RX, + CENTRALIZATION_TX, + TX_EMPHASIS, + LOAD_PATTERN_HIGH, + PER_BIT_READ_LEVELING_TF, + MAX_STAGE_LIMIT +}; + +enum hws_access_type { + ACCESS_TYPE_UNICAST = 0, + ACCESS_TYPE_MULTICAST = 1 +}; + +enum hws_algo_type { + ALGO_TYPE_DYNAMIC, + ALGO_TYPE_STATIC +}; + +struct init_cntr_param { + int is_ctrl64_bit; + int do_mrs_phy; + int init_phy; + int msys_init; +}; + +struct pattern_info { + u8 num_of_phases_tx; + u8 tx_burst_size; + u8 delay_between_bursts; + u8 num_of_phases_rx; + u32 start_addr; + u8 pattern_len; +}; + +/* CL value for each frequency */ +struct cl_val_per_freq { + u8 cl_val[DDR_FREQ_LIMIT]; +}; + +struct cs_element { + u8 cs_num; + u8 num_of_cs; +}; + +struct mode_info { + /* 32 bits representing MRS bits */ + u32 reg_mr0[MAX_INTERFACE_NUM]; + u32 reg_mr1[MAX_INTERFACE_NUM]; + u32 reg_mr2[MAX_INTERFACE_NUM]; + u32 reg_m_r3[MAX_INTERFACE_NUM]; + /* + * Each element in array represent read_data_sample register delay for + * a specific interface. + * Each register, 4 bits[0+CS*8 to 4+CS*8] represent Number of DDR + * cycles from read command until data is ready to be fetched from + * the PHY, when accessing CS. + */ + u32 read_data_sample[MAX_INTERFACE_NUM]; + /* + * Each element in array represent read_data_sample register delay for + * a specific interface. + * Each register, 4 bits[0+CS*8 to 4+CS*8] represent the total delay + * from read command until opening the read mask, when accessing CS. + * This field defines the delay in DDR cycles granularity. + */ + u32 read_data_ready[MAX_INTERFACE_NUM]; +}; + +struct hws_tip_freq_config_info { + u8 is_supported; + u8 bw_per_freq; + u8 rate_per_freq; +}; + +struct hws_cs_config_info { + u32 cs_reg_value; + u32 cs_cbe_value; +}; + +struct dfx_access { + u8 pipe; + u8 client; +}; + +struct hws_xsb_info { + struct dfx_access *dfx_table; +}; + +int ddr3_tip_register_dq_table(u32 dev_num, u32 *table); +int hws_ddr3_tip_select_ddr_controller(u32 dev_num, int enable); +int hws_ddr3_tip_init_controller(u32 dev_num, + struct init_cntr_param *init_cntr_prm); +int hws_ddr3_tip_load_topology_map(u32 dev_num, + struct hws_topology_map *topology); +int hws_ddr3_tip_run_alg(u32 dev_num, enum hws_algo_type algo_type); +int hws_ddr3_tip_mode_read(u32 dev_num, struct mode_info *mode_info); +int hws_ddr3_tip_read_training_result(u32 dev_num, + enum hws_result result[MAX_STAGE_LIMIT][MAX_INTERFACE_NUM]); +int ddr3_tip_is_pup_lock(u32 *pup_buf, enum hws_training_result read_mode); +u8 ddr3_tip_get_buf_min(u8 *buf_ptr); +u8 ddr3_tip_get_buf_max(u8 *buf_ptr); + +#endif /* _DDR3_TRAINING_IP_H_ */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_bist.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_bist.h new file mode 100644 index 0000000..5c9bfe9 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_bist.h @@ -0,0 +1,54 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_TRAINING_IP_BIST_H_ +#define _DDR3_TRAINING_IP_BIST_H_ + +#include "ddr3_training_ip.h" + +enum hws_bist_operation { + BIST_STOP = 0, + BIST_START = 1 +}; + +enum hws_stress_jump { + STRESS_NONE = 0, + STRESS_ENABLE = 1 +}; + +enum hws_pattern_duration { + DURATION_SINGLE = 0, + DURATION_STOP_AT_FAIL = 1, + DURATION_ADDRESS = 2, + DURATION_CONT = 4 +}; + +struct bist_result { + u32 bist_error_cnt; + u32 bist_fail_low; + u32 bist_fail_high; + u32 bist_last_fail_addr; +}; + +int ddr3_tip_bist_read_result(u32 dev_num, u32 if_id, + struct bist_result *pst_bist_result); +int ddr3_tip_bist_activate(u32 dev_num, enum hws_pattern pattern, + enum hws_access_type access_type, + u32 if_num, enum hws_dir direction, + enum hws_stress_jump addr_stress_jump, + enum hws_pattern_duration duration, + enum hws_bist_operation oper_type, + u32 offset, u32 cs_num, u32 pattern_addr_length); +int hws_ddr3_run_bist(u32 dev_num, enum hws_pattern pattern, u32 *result, + u32 cs_num); +int ddr3_tip_run_sweep_test(int dev_num, u32 repeat_num, u32 direction, + u32 mode); +int ddr3_tip_print_regs(u32 dev_num); +int ddr3_tip_reg_dump(u32 dev_num); +int run_xsb_test(u32 dev_num, u32 mem_addr, u32 write_type, u32 read_type, + u32 burst_length); + +#endif /* _DDR3_TRAINING_IP_BIST_H_ */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_centralization.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_centralization.h new file mode 100644 index 0000000..7c57603 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_centralization.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_TRAINING_IP_CENTRALIZATION_H +#define _DDR3_TRAINING_IP_CENTRALIZATION_H + +int ddr3_tip_centralization_tx(u32 dev_num); +int ddr3_tip_centralization_rx(u32 dev_num); +int ddr3_tip_print_centralization_result(u32 dev_num); +int ddr3_tip_special_rx(u32 dev_num); + +#endif /* _DDR3_TRAINING_IP_CENTRALIZATION_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_db.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_db.h new file mode 100644 index 0000000..c0afa77 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_db.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_TRAINING_IP_DB_H_ +#define _DDR3_TRAINING_IP_DB_H_ + +enum hws_pattern { + PATTERN_PBS1, + PATTERN_PBS2, + PATTERN_RL, + PATTERN_STATIC_PBS, + PATTERN_KILLER_DQ0, + PATTERN_KILLER_DQ1, + PATTERN_KILLER_DQ2, + PATTERN_KILLER_DQ3, + PATTERN_KILLER_DQ4, + PATTERN_KILLER_DQ5, + PATTERN_KILLER_DQ6, + PATTERN_KILLER_DQ7, + PATTERN_PBS3, + PATTERN_RL2, + PATTERN_TEST, + PATTERN_FULL_SSO0, + PATTERN_FULL_SSO1, + PATTERN_FULL_SSO2, + PATTERN_FULL_SSO3, + PATTERN_VREF, + PATTERN_LIMIT +}; + +#endif /* _DDR3_TRAINING_IP_DB_H_ */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_def.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_def.h new file mode 100644 index 0000000..51a66d8 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_def.h @@ -0,0 +1,173 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_TRAINING_IP_DEF_H +#define _DDR3_TRAINING_IP_DEF_H + +#include "silicon_if.h" + +#define PATTERN_55 0x55555555 +#define PATTERN_AA 0xaaaaaaaa +#define PATTERN_80 0x80808080 +#define PATTERN_20 0x20202020 +#define PATTERN_01 0x01010101 +#define PATTERN_FF 0xffffffff +#define PATTERN_00 0x00000000 + +/* 16bit bus width patterns */ +#define PATTERN_55AA 0x5555aaaa +#define PATTERN_00FF 0x0000ffff +#define PATTERN_0080 0x00008080 + +#define INVALID_VALUE 0xffffffff +#define MAX_NUM_OF_DUNITS 32 +/* + * length *2 = length in words of pattern, first low address, + * second high address + */ +#define TEST_PATTERN_LENGTH 4 +#define KILLER_PATTERN_DQ_NUMBER 8 +#define SSO_DQ_NUMBER 4 +#define PATTERN_MAXIMUM_LENGTH 64 +#define ADLL_TX_LENGTH 64 +#define ADLL_RX_LENGTH 32 + +#define PARAM_NOT_CARE 0 + +#define READ_LEVELING_PHY_OFFSET 2 +#define WRITE_LEVELING_PHY_OFFSET 0 + +#define MASK_ALL_BITS 0xffffffff + +#define CS_BIT_MASK 0xf + +/* DFX access */ +#define BROADCAST_ID 28 +#define MULTICAST_ID 29 + +#define XSB_BASE_ADDR 0x00004000 +#define XSB_CTRL_0_REG 0x00000000 +#define XSB_CTRL_1_REG 0x00000004 +#define XSB_CMD_REG 0x00000008 +#define XSB_ADDRESS_REG 0x0000000c +#define XSB_DATA_REG 0x00000010 +#define PIPE_ENABLE_ADDR 0x000f8000 +#define ENABLE_DDR_TUNING_ADDR 0x000f829c + +#define CLIENT_BASE_ADDR 0x00002000 +#define CLIENT_CTRL_REG 0x00000000 + +#define TARGET_INT 0x1801 +#define TARGET_EXT 0x180e +#define BYTE_EN 0 +#define CMD_READ 0 +#define CMD_WRITE 1 + +#define INTERNAL_ACCESS_PORT 1 +#define EXECUTING 1 +#define ACCESS_EXT 1 +#define CS2_EXIST_BIT 2 +#define TRAINING_ID 0xf +#define EXT_TRAINING_ID 1 +#define EXT_MODE 0x4 + +#define GET_RESULT_STATE(res) (res) +#define SET_RESULT_STATE(res, state) (res = state) + +#define _1K 0x00000400 +#define _4K 0x00001000 +#define _8K 0x00002000 +#define _16K 0x00004000 +#define _32K 0x00008000 +#define _64K 0x00010000 +#define _128K 0x00020000 +#define _256K 0x00040000 +#define _512K 0x00080000 + +#define _1M 0x00100000 +#define _2M 0x00200000 +#define _4M 0x00400000 +#define _8M 0x00800000 +#define _16M 0x01000000 +#define _32M 0x02000000 +#define _64M 0x04000000 +#define _128M 0x08000000 +#define _256M 0x10000000 +#define _512M 0x20000000 + +#define _1G 0x40000000 +#define _2G 0x80000000 + +#define ADDR_SIZE_512MB 0x04000000 +#define ADDR_SIZE_1GB 0x08000000 +#define ADDR_SIZE_2GB 0x10000000 +#define ADDR_SIZE_4GB 0x20000000 +#define ADDR_SIZE_8GB 0x40000000 + +enum hws_edge_compare { + EDGE_PF, + EDGE_FP, + EDGE_FPF, + EDGE_PFP +}; + +enum hws_control_element { + HWS_CONTROL_ELEMENT_ADLL, /* per bit 1 edge */ + HWS_CONTROL_ELEMENT_DQ_SKEW, + HWS_CONTROL_ELEMENT_DQS_SKEW +}; + +enum hws_search_dir { + HWS_LOW2HIGH, + HWS_HIGH2LOW, + HWS_SEARCH_DIR_LIMIT +}; + +enum hws_page_size { + PAGE_SIZE_1K, + PAGE_SIZE_2K +}; + +enum hws_operation { + OPERATION_READ = 0, + OPERATION_WRITE = 1 +}; + +enum hws_training_ip_stat { + HWS_TRAINING_IP_STATUS_FAIL, + HWS_TRAINING_IP_STATUS_SUCCESS, + HWS_TRAINING_IP_STATUS_TIMEOUT +}; + +enum hws_ddr_cs { + CS_SINGLE, + CS_NON_SINGLE +}; + +enum hws_ddr_phy { + DDR_PHY_DATA = 0, + DDR_PHY_CONTROL = 1 +}; + +enum hws_dir { + OPER_WRITE, + OPER_READ, + OPER_WRITE_AND_READ +}; + +enum hws_wl_supp { + PHASE_SHIFT, + CLOCK_SHIFT, + ALIGN_SHIFT +}; + +struct reg_data { + u32 reg_addr; + u32 reg_data; + u32 reg_mask; +}; + +#endif /* _DDR3_TRAINING_IP_DEF_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c new file mode 100644 index 0000000..011824a --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c @@ -0,0 +1,1354 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +#define PATTERN_1 0x55555555 +#define PATTERN_2 0xaaaaaaaa + +#define VALIDATE_TRAINING_LIMIT(e1, e2) \ + ((((e2) - (e1) + 1) > 33) && ((e1) < 67)) + +u32 phy_reg_bk[MAX_INTERFACE_NUM][MAX_BUS_NUM][BUS_WIDTH_IN_BITS]; + +u32 training_res[MAX_INTERFACE_NUM * MAX_BUS_NUM * BUS_WIDTH_IN_BITS * + HWS_SEARCH_DIR_LIMIT]; + +u16 mask_results_dq_reg_map[] = { + RESULT_CONTROL_PUP_0_BIT_0_REG, RESULT_CONTROL_PUP_0_BIT_1_REG, + RESULT_CONTROL_PUP_0_BIT_2_REG, RESULT_CONTROL_PUP_0_BIT_3_REG, + RESULT_CONTROL_PUP_0_BIT_4_REG, RESULT_CONTROL_PUP_0_BIT_5_REG, + RESULT_CONTROL_PUP_0_BIT_6_REG, RESULT_CONTROL_PUP_0_BIT_7_REG, + RESULT_CONTROL_PUP_1_BIT_0_REG, RESULT_CONTROL_PUP_1_BIT_1_REG, + RESULT_CONTROL_PUP_1_BIT_2_REG, RESULT_CONTROL_PUP_1_BIT_3_REG, + RESULT_CONTROL_PUP_1_BIT_4_REG, RESULT_CONTROL_PUP_1_BIT_5_REG, + RESULT_CONTROL_PUP_1_BIT_6_REG, RESULT_CONTROL_PUP_1_BIT_7_REG, + RESULT_CONTROL_PUP_2_BIT_0_REG, RESULT_CONTROL_PUP_2_BIT_1_REG, + RESULT_CONTROL_PUP_2_BIT_2_REG, RESULT_CONTROL_PUP_2_BIT_3_REG, + RESULT_CONTROL_PUP_2_BIT_4_REG, RESULT_CONTROL_PUP_2_BIT_5_REG, + RESULT_CONTROL_PUP_2_BIT_6_REG, RESULT_CONTROL_PUP_2_BIT_7_REG, + RESULT_CONTROL_PUP_3_BIT_0_REG, RESULT_CONTROL_PUP_3_BIT_1_REG, + RESULT_CONTROL_PUP_3_BIT_2_REG, RESULT_CONTROL_PUP_3_BIT_3_REG, + RESULT_CONTROL_PUP_3_BIT_4_REG, RESULT_CONTROL_PUP_3_BIT_5_REG, + RESULT_CONTROL_PUP_3_BIT_6_REG, RESULT_CONTROL_PUP_3_BIT_7_REG, + RESULT_CONTROL_PUP_4_BIT_0_REG, RESULT_CONTROL_PUP_4_BIT_1_REG, + RESULT_CONTROL_PUP_4_BIT_2_REG, RESULT_CONTROL_PUP_4_BIT_3_REG, + RESULT_CONTROL_PUP_4_BIT_4_REG, RESULT_CONTROL_PUP_4_BIT_5_REG, + RESULT_CONTROL_PUP_4_BIT_6_REG, RESULT_CONTROL_PUP_4_BIT_7_REG, +}; + +u16 mask_results_pup_reg_map[] = { + RESULT_CONTROL_BYTE_PUP_0_REG, RESULT_CONTROL_BYTE_PUP_1_REG, + RESULT_CONTROL_BYTE_PUP_2_REG, RESULT_CONTROL_BYTE_PUP_3_REG, + RESULT_CONTROL_BYTE_PUP_4_REG +}; + +u16 mask_results_dq_reg_map_pup3_ecc[] = { + RESULT_CONTROL_PUP_0_BIT_0_REG, RESULT_CONTROL_PUP_0_BIT_1_REG, + RESULT_CONTROL_PUP_0_BIT_2_REG, RESULT_CONTROL_PUP_0_BIT_3_REG, + RESULT_CONTROL_PUP_0_BIT_4_REG, RESULT_CONTROL_PUP_0_BIT_5_REG, + RESULT_CONTROL_PUP_0_BIT_6_REG, RESULT_CONTROL_PUP_0_BIT_7_REG, + RESULT_CONTROL_PUP_1_BIT_0_REG, RESULT_CONTROL_PUP_1_BIT_1_REG, + RESULT_CONTROL_PUP_1_BIT_2_REG, RESULT_CONTROL_PUP_1_BIT_3_REG, + RESULT_CONTROL_PUP_1_BIT_4_REG, RESULT_CONTROL_PUP_1_BIT_5_REG, + RESULT_CONTROL_PUP_1_BIT_6_REG, RESULT_CONTROL_PUP_1_BIT_7_REG, + RESULT_CONTROL_PUP_2_BIT_0_REG, RESULT_CONTROL_PUP_2_BIT_1_REG, + RESULT_CONTROL_PUP_2_BIT_2_REG, RESULT_CONTROL_PUP_2_BIT_3_REG, + RESULT_CONTROL_PUP_2_BIT_4_REG, RESULT_CONTROL_PUP_2_BIT_5_REG, + RESULT_CONTROL_PUP_2_BIT_6_REG, RESULT_CONTROL_PUP_2_BIT_7_REG, + RESULT_CONTROL_PUP_4_BIT_0_REG, RESULT_CONTROL_PUP_4_BIT_1_REG, + RESULT_CONTROL_PUP_4_BIT_2_REG, RESULT_CONTROL_PUP_4_BIT_3_REG, + RESULT_CONTROL_PUP_4_BIT_4_REG, RESULT_CONTROL_PUP_4_BIT_5_REG, + RESULT_CONTROL_PUP_4_BIT_6_REG, RESULT_CONTROL_PUP_4_BIT_7_REG, + RESULT_CONTROL_PUP_4_BIT_0_REG, RESULT_CONTROL_PUP_4_BIT_1_REG, + RESULT_CONTROL_PUP_4_BIT_2_REG, RESULT_CONTROL_PUP_4_BIT_3_REG, + RESULT_CONTROL_PUP_4_BIT_4_REG, RESULT_CONTROL_PUP_4_BIT_5_REG, + RESULT_CONTROL_PUP_4_BIT_6_REG, RESULT_CONTROL_PUP_4_BIT_7_REG, +}; + +u16 mask_results_pup_reg_map_pup3_ecc[] = { + RESULT_CONTROL_BYTE_PUP_0_REG, RESULT_CONTROL_BYTE_PUP_1_REG, + RESULT_CONTROL_BYTE_PUP_2_REG, RESULT_CONTROL_BYTE_PUP_4_REG, + RESULT_CONTROL_BYTE_PUP_4_REG +}; + +struct pattern_info pattern_table_16[] = { + /* + * num tx phases, tx burst, delay between, rx pattern, + * start_address, pattern_len + */ + {1, 1, 2, 1, 0x0080, 2}, /* PATTERN_PBS1 */ + {1, 1, 2, 1, 0x00c0, 2}, /* PATTERN_PBS2 */ + {1, 1, 2, 1, 0x0100, 2}, /* PATTERN_RL */ + {0xf, 0x7, 2, 0x7, 0x0140, 16}, /* PATTERN_STATIC_PBS */ + {0xf, 0x7, 2, 0x7, 0x0190, 16}, /* PATTERN_KILLER_DQ0 */ + {0xf, 0x7, 2, 0x7, 0x01d0, 16}, /* PATTERN_KILLER_DQ1 */ + {0xf, 0x7, 2, 0x7, 0x0210, 16}, /* PATTERN_KILLER_DQ2 */ + {0xf, 0x7, 2, 0x7, 0x0250, 16}, /* PATTERN_KILLER_DQ3 */ + {0xf, 0x7, 2, 0x7, 0x0290, 16}, /* PATTERN_KILLER_DQ4 */ + {0xf, 0x7, 2, 0x7, 0x02d0, 16}, /* PATTERN_KILLER_DQ5 */ + {0xf, 0x7, 2, 0x7, 0x0310, 16}, /* PATTERN_KILLER_DQ6 */ + {0xf, 0x7, 2, 0x7, 0x0350, 16}, /* PATTERN_KILLER_DQ7 */ + {1, 1, 2, 1, 0x0380, 2}, /* PATTERN_PBS3 */ + {1, 1, 2, 1, 0x0000, 2}, /* PATTERN_RL2 */ + {1, 1, 2, 1, 0x0040, 2}, /* PATTERN_TEST */ + {0xf, 0x7, 2, 0x7, 0x03c0, 16}, /* PATTERN_FULL_SSO_1T */ + {0xf, 0x7, 2, 0x7, 0x0400, 16}, /* PATTERN_FULL_SSO_2T */ + {0xf, 0x7, 2, 0x7, 0x0440, 16}, /* PATTERN_FULL_SSO_3T */ + {0xf, 0x7, 2, 0x7, 0x0480, 16}, /* PATTERN_FULL_SSO_4T */ + {0xf, 0x7, 2, 0x7, 0x04c0, 16} /* PATTERN_VREF */ + /*Note: actual start_address is <<3 of defined addess */ +}; + +struct pattern_info pattern_table_32[] = { + /* + * num tx phases, tx burst, delay between, rx pattern, + * start_address, pattern_len + */ + {3, 3, 2, 3, 0x0080, 4}, /* PATTERN_PBS1 */ + {3, 3, 2, 3, 0x00c0, 4}, /* PATTERN_PBS2 */ + {3, 3, 2, 3, 0x0100, 4}, /* PATTERN_RL */ + {0x1f, 0xf, 2, 0xf, 0x0140, 32}, /* PATTERN_STATIC_PBS */ + {0x1f, 0xf, 2, 0xf, 0x0190, 32}, /* PATTERN_KILLER_DQ0 */ + {0x1f, 0xf, 2, 0xf, 0x01d0, 32}, /* PATTERN_KILLER_DQ1 */ + {0x1f, 0xf, 2, 0xf, 0x0210, 32}, /* PATTERN_KILLER_DQ2 */ + {0x1f, 0xf, 2, 0xf, 0x0250, 32}, /* PATTERN_KILLER_DQ3 */ + {0x1f, 0xf, 2, 0xf, 0x0290, 32}, /* PATTERN_KILLER_DQ4 */ + {0x1f, 0xf, 2, 0xf, 0x02d0, 32}, /* PATTERN_KILLER_DQ5 */ + {0x1f, 0xf, 2, 0xf, 0x0310, 32}, /* PATTERN_KILLER_DQ6 */ + {0x1f, 0xf, 2, 0xf, 0x0350, 32}, /* PATTERN_KILLER_DQ7 */ + {3, 3, 2, 3, 0x0380, 4}, /* PATTERN_PBS3 */ + {3, 3, 2, 3, 0x0000, 4}, /* PATTERN_RL2 */ + {3, 3, 2, 3, 0x0040, 4}, /* PATTERN_TEST */ + {0x1f, 0xf, 2, 0xf, 0x03c0, 32}, /* PATTERN_FULL_SSO_1T */ + {0x1f, 0xf, 2, 0xf, 0x0400, 32}, /* PATTERN_FULL_SSO_2T */ + {0x1f, 0xf, 2, 0xf, 0x0440, 32}, /* PATTERN_FULL_SSO_3T */ + {0x1f, 0xf, 2, 0xf, 0x0480, 32}, /* PATTERN_FULL_SSO_4T */ + {0x1f, 0xf, 2, 0xf, 0x04c0, 32} /* PATTERN_VREF */ + /*Note: actual start_address is <<3 of defined addess */ +}; + +u32 train_dev_num; +enum hws_ddr_cs traintrain_cs_type; +u32 train_pup_num; +enum hws_training_result train_result_type; +enum hws_control_element train_control_element; +enum hws_search_dir traine_search_dir; +enum hws_dir train_direction; +u32 train_if_select; +u32 train_init_value; +u32 train_number_iterations; +enum hws_pattern train_pattern; +enum hws_edge_compare train_edge_compare; +u32 train_cs_num; +u32 train_if_acess, train_if_id, train_pup_access; +u32 max_polling_for_done = 1000000; + +u32 *ddr3_tip_get_buf_ptr(u32 dev_num, enum hws_search_dir search, + enum hws_training_result result_type, + u32 interface_num) +{ + u32 *buf_ptr = NULL; + + buf_ptr = &training_res + [MAX_INTERFACE_NUM * MAX_BUS_NUM * BUS_WIDTH_IN_BITS * search + + interface_num * MAX_BUS_NUM * BUS_WIDTH_IN_BITS]; + + return buf_ptr; +} + +/* + * IP Training search + * Note: for one edge search only from fail to pass, else jitter can + * be be entered into solution. + */ +int ddr3_tip_ip_training(u32 dev_num, enum hws_access_type access_type, + u32 interface_num, + enum hws_access_type pup_access_type, + u32 pup_num, enum hws_training_result result_type, + enum hws_control_element control_element, + enum hws_search_dir search_dir, enum hws_dir direction, + u32 interface_mask, u32 init_value, u32 num_iter, + enum hws_pattern pattern, + enum hws_edge_compare edge_comp, + enum hws_ddr_cs cs_type, u32 cs_num, + enum hws_training_ip_stat *train_status) +{ + u32 mask_dq_num_of_regs, mask_pup_num_of_regs, index_cnt, poll_cnt, + reg_data, pup_id; + u32 tx_burst_size; + u32 delay_between_burst; + u32 rd_mode; + u32 read_data[MAX_INTERFACE_NUM]; + struct pattern_info *pattern_table = ddr3_tip_get_pattern_table(); + u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map(); + u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (pup_num >= tm->num_of_bus_per_interface) { + DEBUG_TRAINING_IP_ENGINE(DEBUG_LEVEL_ERROR, + ("pup_num %d not valid\n", pup_num)); + } + if (interface_num >= MAX_INTERFACE_NUM) { + DEBUG_TRAINING_IP_ENGINE(DEBUG_LEVEL_ERROR, + ("if_id %d not valid\n", + interface_num)); + } + if (train_status == NULL) { + DEBUG_TRAINING_IP_ENGINE(DEBUG_LEVEL_ERROR, + ("error param 4\n")); + return MV_BAD_PARAM; + } + + /* load pattern */ + if (cs_type == CS_SINGLE) { + /* All CSs to CS0 */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, interface_num, + CS_ENABLE_REG, 1 << 3, 1 << 3)); + /* All CSs to CS0 */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, interface_num, + ODPG_DATA_CONTROL_REG, + (0x3 | (effective_cs << 26)), 0xc000003)); + } else { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, interface_num, + CS_ENABLE_REG, 0, 1 << 3)); + /* CS select */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, interface_num, + ODPG_DATA_CONTROL_REG, 0x3 | cs_num << 26, + 0x3 | 3 << 26)); + } + + /* load pattern to ODPG */ + ddr3_tip_load_pattern_to_odpg(dev_num, access_type, interface_num, + pattern, + pattern_table[pattern].start_addr); + tx_burst_size = (direction == OPER_WRITE) ? + pattern_table[pattern].tx_burst_size : 0; + delay_between_burst = (direction == OPER_WRITE) ? 2 : 0; + rd_mode = (direction == OPER_WRITE) ? 1 : 0; + CHECK_STATUS(ddr3_tip_configure_odpg + (dev_num, access_type, interface_num, direction, + pattern_table[pattern].num_of_phases_tx, tx_burst_size, + pattern_table[pattern].num_of_phases_rx, + delay_between_burst, rd_mode, effective_cs, STRESS_NONE, + DURATION_SINGLE)); + reg_data = (direction == OPER_READ) ? 0 : (0x3 << 30); + reg_data |= (direction == OPER_READ) ? 0x60 : 0xfa; + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, interface_num, + ODPG_WRITE_READ_MODE_ENABLE_REG, reg_data, + MASK_ALL_BITS)); + reg_data = (edge_comp == EDGE_PF || edge_comp == EDGE_FP) ? 0 : 1 << 6; + reg_data |= (edge_comp == EDGE_PF || edge_comp == EDGE_PFP) ? + (1 << 7) : 0; + + /* change from Pass to Fail will lock the result */ + if (pup_access_type == ACCESS_TYPE_MULTICAST) + reg_data |= 0xe << 14; + else + reg_data |= pup_num << 14; + + if (edge_comp == EDGE_FP) { + /* don't search for readl edge change, only the state */ + reg_data |= (0 << 20); + } else if (edge_comp == EDGE_FPF) { + reg_data |= (0 << 20); + } else { + reg_data |= (3 << 20); + } + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, interface_num, + ODPG_TRAINING_CONTROL_REG, + reg_data | (0x7 << 8) | (0x7 << 11), + (0x3 | (0x3 << 2) | (0x3 << 6) | (1 << 5) | (0x7 << 8) | + (0x7 << 11) | (0xf << 14) | (0x3 << 18) | (3 << 20)))); + reg_data = (search_dir == HWS_LOW2HIGH) ? 0 : (1 << 8); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, interface_num, ODPG_OBJ1_OPCODE_REG, + 1 | reg_data | init_value << 9 | (1 << 25) | (1 << 26), + 0xff | (1 << 8) | (0xffff << 9) | (1 << 25) | (1 << 26))); + + /* + * Write2_dunit(0x10b4, Number_iteration , [15:0]) + * Max number of iterations + */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, interface_num, + ODPG_OBJ1_ITER_CNT_REG, num_iter, + 0xffff)); + if (control_element == HWS_CONTROL_ELEMENT_DQ_SKEW && + direction == OPER_READ) { + /* + * Write2_dunit(0x10c0, 0x5f , [7:0]) + * MC PBS Reg Address at DDR PHY + */ + reg_data = 0x5f + + effective_cs * CALIBRATED_OBJECTS_REG_ADDR_OFFSET; + } else if (control_element == HWS_CONTROL_ELEMENT_DQ_SKEW && + direction == OPER_WRITE) { + reg_data = 0x1f + + effective_cs * CALIBRATED_OBJECTS_REG_ADDR_OFFSET; + } else if (control_element == HWS_CONTROL_ELEMENT_ADLL && + direction == OPER_WRITE) { + /* + * LOOP 0x00000001 + 4*n: + * where n (0-3) represents M_CS number + */ + /* + * Write2_dunit(0x10c0, 0x1 , [7:0]) + * ADLL WR Reg Address at DDR PHY + */ + reg_data = 1 + effective_cs * CS_REGISTER_ADDR_OFFSET; + } else if (control_element == HWS_CONTROL_ELEMENT_ADLL && + direction == OPER_READ) { + /* ADLL RD Reg Address at DDR PHY */ + reg_data = 3 + effective_cs * CS_REGISTER_ADDR_OFFSET; + } else if (control_element == HWS_CONTROL_ELEMENT_DQS_SKEW && + direction == OPER_WRITE) { + /* TBD not defined in 0.5.0 requirement */ + } else if (control_element == HWS_CONTROL_ELEMENT_DQS_SKEW && + direction == OPER_READ) { + /* TBD not defined in 0.5.0 requirement */ + } + + reg_data |= (0x6 << 28); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, interface_num, CALIB_OBJ_PRFA_REG, + reg_data | (init_value << 8), + 0xff | (0xffff << 8) | (0xf << 24) | (u32) (0xf << 28))); + + mask_dq_num_of_regs = tm->num_of_bus_per_interface * BUS_WIDTH_IN_BITS; + mask_pup_num_of_regs = tm->num_of_bus_per_interface; + + if (result_type == RESULT_PER_BIT) { + for (index_cnt = 0; index_cnt < mask_dq_num_of_regs; + index_cnt++) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, interface_num, + mask_results_dq_reg_map[index_cnt], 0, + 1 << 24)); + } + + /* Mask disabled buses */ + for (pup_id = 0; pup_id < tm->num_of_bus_per_interface; + pup_id++) { + if (IS_ACTIVE(tm->bus_act_mask, pup_id) == 1) + continue; + + for (index_cnt = (mask_dq_num_of_regs - pup_id * 8); + index_cnt < + (mask_dq_num_of_regs - (pup_id + 1) * 8); + index_cnt++) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, + interface_num, + mask_results_dq_reg_map + [index_cnt], (1 << 24), 1 << 24)); + } + } + + for (index_cnt = 0; index_cnt < mask_pup_num_of_regs; + index_cnt++) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, interface_num, + mask_results_pup_reg_map[index_cnt], + (1 << 24), 1 << 24)); + } + } else if (result_type == RESULT_PER_BYTE) { + /* write to adll */ + for (index_cnt = 0; index_cnt < mask_pup_num_of_regs; + index_cnt++) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, interface_num, + mask_results_pup_reg_map[index_cnt], 0, + 1 << 24)); + } + for (index_cnt = 0; index_cnt < mask_dq_num_of_regs; + index_cnt++) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, interface_num, + mask_results_dq_reg_map[index_cnt], + (1 << 24), (1 << 24))); + } + } + + /* Start Training Trigger */ + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, interface_num, + ODPG_TRAINING_TRIGGER_REG, 1, 1)); + /* wait for all RFU tests to finish (or timeout) */ + /* WA for 16 bit mode, more investigation needed */ + mdelay(1); + + /* Training "Done ?" */ + for (index_cnt = 0; index_cnt < MAX_INTERFACE_NUM; index_cnt++) { + if (IS_ACTIVE(tm->if_act_mask, index_cnt) == 0) + continue; + + if (interface_mask & (1 << index_cnt)) { + /* need to check results for this Dunit */ + for (poll_cnt = 0; poll_cnt < max_polling_for_done; + poll_cnt++) { + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, + index_cnt, + ODPG_TRAINING_STATUS_REG, + ®_data, MASK_ALL_BITS)); + if ((reg_data & 0x2) != 0) { + /*done */ + train_status[index_cnt] = + HWS_TRAINING_IP_STATUS_SUCCESS; + break; + } + } + + if (poll_cnt == max_polling_for_done) { + train_status[index_cnt] = + HWS_TRAINING_IP_STATUS_TIMEOUT; + } + } + /* Be sure that ODPG done */ + CHECK_STATUS(is_odpg_access_done(dev_num, index_cnt)); + } + + /* Write ODPG done in Dunit */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_STATUS_DONE_REG, 0, 0x1)); + + /* wait for all Dunit tests to finish (or timeout) */ + /* Training "Done ?" */ + /* Training "Pass ?" */ + for (index_cnt = 0; index_cnt < MAX_INTERFACE_NUM; index_cnt++) { + if (IS_ACTIVE(tm->if_act_mask, index_cnt) == 0) + continue; + + if (interface_mask & (1 << index_cnt)) { + /* need to check results for this Dunit */ + for (poll_cnt = 0; poll_cnt < max_polling_for_done; + poll_cnt++) { + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, + index_cnt, + ODPG_TRAINING_TRIGGER_REG, + read_data, MASK_ALL_BITS)); + reg_data = read_data[index_cnt]; + if ((reg_data & 0x2) != 0) { + /* done */ + if ((reg_data & 0x4) == 0) { + train_status[index_cnt] = + HWS_TRAINING_IP_STATUS_SUCCESS; + } else { + train_status[index_cnt] = + HWS_TRAINING_IP_STATUS_FAIL; + } + break; + } + } + + if (poll_cnt == max_polling_for_done) { + train_status[index_cnt] = + HWS_TRAINING_IP_STATUS_TIMEOUT; + } + } + } + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_DATA_CONTROL_REG, 0, MASK_ALL_BITS)); + + return MV_OK; +} + +/* + * Load expected Pattern to ODPG + */ +int ddr3_tip_load_pattern_to_odpg(u32 dev_num, enum hws_access_type access_type, + u32 if_id, enum hws_pattern pattern, + u32 load_addr) +{ + u32 pattern_length_cnt = 0; + struct pattern_info *pattern_table = ddr3_tip_get_pattern_table(); + + for (pattern_length_cnt = 0; + pattern_length_cnt < pattern_table[pattern].pattern_len; + pattern_length_cnt++) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + ODPG_PATTERN_DATA_LOW_REG, + pattern_table_get_word(dev_num, pattern, + (u8) (pattern_length_cnt * + 2)), MASK_ALL_BITS)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + ODPG_PATTERN_DATA_HI_REG, + pattern_table_get_word(dev_num, pattern, + (u8) (pattern_length_cnt * + 2 + 1)), + MASK_ALL_BITS)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + ODPG_PATTERN_ADDR_REG, pattern_length_cnt, + MASK_ALL_BITS)); + } + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + ODPG_PATTERN_ADDR_OFFSET_REG, load_addr, MASK_ALL_BITS)); + + return MV_OK; +} + +/* + * Configure ODPG + */ +int ddr3_tip_configure_odpg(u32 dev_num, enum hws_access_type access_type, + u32 if_id, enum hws_dir direction, u32 tx_phases, + u32 tx_burst_size, u32 rx_phases, + u32 delay_between_burst, u32 rd_mode, u32 cs_num, + u32 addr_stress_jump, u32 single_pattern) +{ + u32 data_value = 0; + int ret; + + data_value = ((single_pattern << 2) | (tx_phases << 5) | + (tx_burst_size << 11) | (delay_between_burst << 15) | + (rx_phases << 21) | (rd_mode << 25) | (cs_num << 26) | + (addr_stress_jump << 29)); + ret = ddr3_tip_if_write(dev_num, access_type, if_id, + ODPG_DATA_CONTROL_REG, data_value, 0xaffffffc); + if (ret != MV_OK) + return ret; + + return MV_OK; +} + +int ddr3_tip_process_result(u32 *ar_result, enum hws_edge e_edge, + enum hws_edge_search e_edge_search, + u32 *edge_result) +{ + u32 i, res; + int tap_val, max_val = -10000, min_val = 10000; + int lock_success = 1; + + for (i = 0; i < BUS_WIDTH_IN_BITS; i++) { + res = GET_LOCK_RESULT(ar_result[i]); + if (res == 0) { + lock_success = 0; + break; + } + DEBUG_TRAINING_IP_ENGINE(DEBUG_LEVEL_ERROR, + ("lock failed for bit %d\n", i)); + } + + if (lock_success == 1) { + for (i = 0; i < BUS_WIDTH_IN_BITS; i++) { + tap_val = GET_TAP_RESULT(ar_result[i], e_edge); + if (tap_val > max_val) + max_val = tap_val; + if (tap_val < min_val) + min_val = tap_val; + if (e_edge_search == TRAINING_EDGE_MAX) + *edge_result = (u32) max_val; + else + *edge_result = (u32) min_val; + + DEBUG_TRAINING_IP_ENGINE(DEBUG_LEVEL_ERROR, + ("i %d ar_result[i] 0x%x tap_val %d max_val %d min_val %d Edge_result %d\n", + i, ar_result[i], tap_val, + max_val, min_val, + *edge_result)); + } + } else { + return MV_FAIL; + } + + return MV_OK; +} + +/* + * Read training search result + */ +int ddr3_tip_read_training_result(u32 dev_num, u32 if_id, + enum hws_access_type pup_access_type, + u32 pup_num, u32 bit_num, + enum hws_search_dir search, + enum hws_dir direction, + enum hws_training_result result_type, + enum hws_training_load_op operation, + u32 cs_num_type, u32 **load_res, + int is_read_from_db, u8 cons_tap, + int is_check_result_validity) +{ + u32 reg_offset, pup_cnt, start_pup, end_pup, start_reg, end_reg; + u32 *interface_train_res = NULL; + u16 *reg_addr = NULL; + u32 read_data[MAX_INTERFACE_NUM]; + u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map(); + u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* + * Agreed assumption: all CS mask contain same number of bits, + * i.e. in multi CS, the number of CS per memory is the same for + * all pups + */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, CS_ENABLE_REG, + (cs_num_type == 0) ? 1 << 3 : 0, (1 << 3))); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ODPG_DATA_CONTROL_REG, (cs_num_type << 26), (3 << 26))); + DEBUG_TRAINING_IP_ENGINE(DEBUG_LEVEL_TRACE, + ("Read_from_d_b %d cs_type %d oper %d result_type %d direction %d search %d pup_num %d if_id %d pup_access_type %d\n", + is_read_from_db, cs_num_type, operation, + result_type, direction, search, pup_num, + if_id, pup_access_type)); + + if ((load_res == NULL) && (is_read_from_db == 1)) { + DEBUG_TRAINING_IP_ENGINE(DEBUG_LEVEL_ERROR, + ("ddr3_tip_read_training_result load_res = NULL")); + return MV_FAIL; + } + if (pup_num >= tm->num_of_bus_per_interface) { + DEBUG_TRAINING_IP_ENGINE(DEBUG_LEVEL_ERROR, + ("pup_num %d not valid\n", pup_num)); + } + if (if_id >= MAX_INTERFACE_NUM) { + DEBUG_TRAINING_IP_ENGINE(DEBUG_LEVEL_ERROR, + ("if_id %d not valid\n", if_id)); + } + if (result_type == RESULT_PER_BIT) + reg_addr = mask_results_dq_reg_map; + else + reg_addr = mask_results_pup_reg_map; + if (pup_access_type == ACCESS_TYPE_UNICAST) { + start_pup = pup_num; + end_pup = pup_num; + } else { /*pup_access_type == ACCESS_TYPE_MULTICAST) */ + + start_pup = 0; + end_pup = tm->num_of_bus_per_interface - 1; + } + + for (pup_cnt = start_pup; pup_cnt <= end_pup; pup_cnt++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup_cnt); + DEBUG_TRAINING_IP_ENGINE( + DEBUG_LEVEL_TRACE, + ("if_id %d start_pup %d end_pup %d pup_cnt %d\n", + if_id, start_pup, end_pup, pup_cnt)); + if (result_type == RESULT_PER_BIT) { + if (bit_num == ALL_BITS_PER_PUP) { + start_reg = pup_cnt * BUS_WIDTH_IN_BITS; + end_reg = (pup_cnt + 1) * BUS_WIDTH_IN_BITS - 1; + } else { + start_reg = + pup_cnt * BUS_WIDTH_IN_BITS + bit_num; + end_reg = pup_cnt * BUS_WIDTH_IN_BITS + bit_num; + } + } else { + start_reg = pup_cnt; + end_reg = pup_cnt; + } + + interface_train_res = + ddr3_tip_get_buf_ptr(dev_num, search, result_type, + if_id); + DEBUG_TRAINING_IP_ENGINE( + DEBUG_LEVEL_TRACE, + ("start_reg %d end_reg %d interface %p\n", + start_reg, end_reg, interface_train_res)); + if (interface_train_res == NULL) { + DEBUG_TRAINING_IP_ENGINE( + DEBUG_LEVEL_ERROR, + ("interface_train_res is NULL\n")); + return MV_FAIL; + } + + for (reg_offset = start_reg; reg_offset <= end_reg; + reg_offset++) { + if (operation == TRAINING_LOAD_OPERATION_UNLOAD) { + if (is_read_from_db == 0) { + CHECK_STATUS(ddr3_tip_if_read + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + reg_addr[reg_offset], + read_data, + MASK_ALL_BITS)); + if (is_check_result_validity == 1) { + if ((read_data[if_id] & + 0x02000000) == 0) { + interface_train_res + [reg_offset] = + 0x02000000 + + 64 + cons_tap; + } else { + interface_train_res + [reg_offset] = + read_data + [if_id] + + cons_tap; + } + } else { + interface_train_res[reg_offset] + = read_data[if_id] + + cons_tap; + } + DEBUG_TRAINING_IP_ENGINE + (DEBUG_LEVEL_TRACE, + ("reg_offset %d value 0x%x addr %p\n", + reg_offset, + interface_train_res + [reg_offset], + &interface_train_res + [reg_offset])); + } else { + *load_res = + &interface_train_res[start_reg]; + DEBUG_TRAINING_IP_ENGINE + (DEBUG_LEVEL_TRACE, + ("*load_res %p\n", *load_res)); + } + } else { + DEBUG_TRAINING_IP_ENGINE(DEBUG_LEVEL_TRACE, + ("not supported\n")); + } + } + } + + return MV_OK; +} + +/* + * Load all pattern to memory using ODPG + */ +int ddr3_tip_load_all_pattern_to_mem(u32 dev_num) +{ + u32 pattern = 0, if_id; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + training_result[training_stage][if_id] = TEST_SUCCESS; + } + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + /* enable single cs */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + CS_ENABLE_REG, (1 << 3), (1 << 3))); + } + + for (pattern = 0; pattern < PATTERN_LIMIT; pattern++) + ddr3_tip_load_pattern_to_mem(dev_num, pattern); + + return MV_OK; +} + +/* + * Wait till ODPG access is ready + */ +int is_odpg_access_done(u32 dev_num, u32 if_id) +{ + u32 poll_cnt = 0, data_value; + u32 read_data[MAX_INTERFACE_NUM]; + + for (poll_cnt = 0; poll_cnt < MAX_POLLING_ITERATIONS; poll_cnt++) { + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ODPG_BIST_DONE, read_data, MASK_ALL_BITS)); + data_value = read_data[if_id]; + if (((data_value >> ODPG_BIST_DONE_BIT_OFFS) & 0x1) == + ODPG_BIST_DONE_BIT_VALUE) { + data_value = data_value & 0xfffffffe; + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ODPG_BIST_DONE, data_value, + MASK_ALL_BITS)); + break; + } + } + + if (poll_cnt >= MAX_POLLING_ITERATIONS) { + DEBUG_TRAINING_IP_ENGINE(DEBUG_LEVEL_ERROR, + ("Bist Activate: poll failure 2\n")); + return MV_FAIL; + } + + return MV_OK; +} + +/* + * Load specific pattern to memory using ODPG + */ +int ddr3_tip_load_pattern_to_mem(u32 dev_num, enum hws_pattern pattern) +{ + u32 reg_data, if_id; + struct pattern_info *pattern_table = ddr3_tip_get_pattern_table(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* load pattern to memory */ + /* + * Write Tx mode, CS0, phases, Tx burst size, delay between burst, + * rx pattern phases + */ + reg_data = + 0x1 | (pattern_table[pattern].num_of_phases_tx << 5) | + (pattern_table[pattern].tx_burst_size << 11) | + (pattern_table[pattern].delay_between_bursts << 15) | + (pattern_table[pattern].num_of_phases_rx << 21) | (0x1 << 25) | + (effective_cs << 26); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_DATA_CONTROL_REG, reg_data, MASK_ALL_BITS)); + /* ODPG Write enable from BIST */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_DATA_CONTROL_REG, (0x1 | (effective_cs << 26)), + 0xc000003)); + /* disable error injection */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_WRITE_DATA_ERROR_REG, 0, 0x1)); + /* load pattern to ODPG */ + ddr3_tip_load_pattern_to_odpg(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, pattern, + pattern_table[pattern].start_addr); + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + if (IS_ACTIVE(tm->if_act_mask, if_id) == 0) + continue; + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0x1498, + 0x3, 0xf)); + } + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_ENABLE_REG, 0x1 << ODPG_ENABLE_OFFS, + (0x1 << ODPG_ENABLE_OFFS))); + + mdelay(1); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + CHECK_STATUS(is_odpg_access_done(dev_num, if_id)); + } + + /* Disable ODPG and stop write to memory */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_DATA_CONTROL_REG, (0x1 << 30), (u32) (0x3 << 30))); + + /* return to default */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_DATA_CONTROL_REG, 0, MASK_ALL_BITS)); + + /* Disable odt0 for CS0 training - need to adjust for multy CS */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x1498, + 0x0, 0xf)); + + /* temporary added */ + mdelay(1); + + return MV_OK; +} + +/* + * Load specific pattern to memory using CPU + */ +int ddr3_tip_load_pattern_to_mem_by_cpu(u32 dev_num, enum hws_pattern pattern, + u32 offset) +{ + /* eranba - TBD */ + return MV_OK; +} + +/* + * Training search routine + */ +int ddr3_tip_ip_training_wrapper_int(u32 dev_num, + enum hws_access_type access_type, + u32 if_id, + enum hws_access_type pup_access_type, + u32 pup_num, u32 bit_num, + enum hws_training_result result_type, + enum hws_control_element control_element, + enum hws_search_dir search_dir, + enum hws_dir direction, + u32 interface_mask, u32 init_value_l2h, + u32 init_value_h2l, u32 num_iter, + enum hws_pattern pattern, + enum hws_edge_compare edge_comp, + enum hws_ddr_cs train_cs_type, u32 cs_num, + enum hws_training_ip_stat *train_status) +{ + u32 interface_num = 0, start_if, end_if, init_value_used; + enum hws_search_dir search_dir_id, start_search, end_search; + enum hws_edge_compare edge_comp_used; + u8 cons_tap = (direction == OPER_WRITE) ? (64) : (0); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (train_status == NULL) { + DEBUG_TRAINING_IP_ENGINE(DEBUG_LEVEL_ERROR, + ("train_status is NULL\n")); + return MV_FAIL; + } + + if ((train_cs_type > CS_NON_SINGLE) || + (edge_comp >= EDGE_PFP) || + (pattern >= PATTERN_LIMIT) || + (direction > OPER_WRITE_AND_READ) || + (search_dir > HWS_HIGH2LOW) || + (control_element > HWS_CONTROL_ELEMENT_DQS_SKEW) || + (result_type > RESULT_PER_BYTE) || + (pup_num >= tm->num_of_bus_per_interface) || + (pup_access_type > ACCESS_TYPE_MULTICAST) || + (if_id > 11) || (access_type > ACCESS_TYPE_MULTICAST)) { + DEBUG_TRAINING_IP_ENGINE( + DEBUG_LEVEL_ERROR, + ("wrong parameter train_cs_type %d edge_comp %d pattern %d direction %d search_dir %d control_element %d result_type %d pup_num %d pup_access_type %d if_id %d access_type %d\n", + train_cs_type, edge_comp, pattern, direction, + search_dir, control_element, result_type, pup_num, + pup_access_type, if_id, access_type)); + return MV_FAIL; + } + + if (edge_comp == EDGE_FPF) { + start_search = HWS_LOW2HIGH; + end_search = HWS_HIGH2LOW; + edge_comp_used = EDGE_FP; + } else { + start_search = search_dir; + end_search = search_dir; + edge_comp_used = edge_comp; + } + + for (search_dir_id = start_search; search_dir_id <= end_search; + search_dir_id++) { + init_value_used = (search_dir_id == HWS_LOW2HIGH) ? + init_value_l2h : init_value_h2l; + DEBUG_TRAINING_IP_ENGINE( + DEBUG_LEVEL_TRACE, + ("dev_num %d, access_type %d, if_id %d, pup_access_type %d,pup_num %d, result_type %d, control_element %d search_dir_id %d, direction %d, interface_mask %d,init_value_used %d, num_iter %d, pattern %d, edge_comp_used %d, train_cs_type %d, cs_num %d\n", + dev_num, access_type, if_id, pup_access_type, pup_num, + result_type, control_element, search_dir_id, + direction, interface_mask, init_value_used, num_iter, + pattern, edge_comp_used, train_cs_type, cs_num)); + + ddr3_tip_ip_training(dev_num, access_type, if_id, + pup_access_type, pup_num, result_type, + control_element, search_dir_id, direction, + interface_mask, init_value_used, num_iter, + pattern, edge_comp_used, train_cs_type, + cs_num, train_status); + if (access_type == ACCESS_TYPE_MULTICAST) { + start_if = 0; + end_if = MAX_INTERFACE_NUM - 1; + } else { + start_if = if_id; + end_if = if_id; + } + + for (interface_num = start_if; interface_num <= end_if; + interface_num++) { + VALIDATE_ACTIVE(tm->if_act_mask, interface_num); + cs_num = 0; + CHECK_STATUS(ddr3_tip_read_training_result + (dev_num, interface_num, pup_access_type, + pup_num, bit_num, search_dir_id, + direction, result_type, + TRAINING_LOAD_OPERATION_UNLOAD, + train_cs_type, NULL, 0, cons_tap, + 0)); + } + } + + return MV_OK; +} + +/* + * Training search & read result routine + */ +int ddr3_tip_ip_training_wrapper(u32 dev_num, enum hws_access_type access_type, + u32 if_id, + enum hws_access_type pup_access_type, + u32 pup_num, + enum hws_training_result result_type, + enum hws_control_element control_element, + enum hws_search_dir search_dir, + enum hws_dir direction, u32 interface_mask, + u32 init_value_l2h, u32 init_value_h2l, + u32 num_iter, enum hws_pattern pattern, + enum hws_edge_compare edge_comp, + enum hws_ddr_cs train_cs_type, u32 cs_num, + enum hws_training_ip_stat *train_status) +{ + u8 e1, e2; + u32 interface_cnt, bit_id, start_if, end_if, bit_end = 0; + u32 *result[HWS_SEARCH_DIR_LIMIT] = { 0 }; + u8 cons_tap = (direction == OPER_WRITE) ? (64) : (0); + u8 bit_bit_mask[MAX_BUS_NUM] = { 0 }, bit_bit_mask_active = 0; + u8 pup_id; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (pup_num >= tm->num_of_bus_per_interface) { + DEBUG_TRAINING_IP_ENGINE(DEBUG_LEVEL_ERROR, + ("pup_num %d not valid\n", pup_num)); + } + + if (if_id >= MAX_INTERFACE_NUM) { + DEBUG_TRAINING_IP_ENGINE(DEBUG_LEVEL_ERROR, + ("if_id %d not valid\n", if_id)); + } + + CHECK_STATUS(ddr3_tip_ip_training_wrapper_int + (dev_num, access_type, if_id, pup_access_type, pup_num, + ALL_BITS_PER_PUP, result_type, control_element, + search_dir, direction, interface_mask, init_value_l2h, + init_value_h2l, num_iter, pattern, edge_comp, + train_cs_type, cs_num, train_status)); + + if (access_type == ACCESS_TYPE_MULTICAST) { + start_if = 0; + end_if = MAX_INTERFACE_NUM - 1; + } else { + start_if = if_id; + end_if = if_id; + } + + for (interface_cnt = start_if; interface_cnt <= end_if; + interface_cnt++) { + VALIDATE_ACTIVE(tm->if_act_mask, interface_cnt); + for (pup_id = 0; + pup_id <= (tm->num_of_bus_per_interface - 1); pup_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup_id); + if (result_type == RESULT_PER_BIT) + bit_end = BUS_WIDTH_IN_BITS - 1; + else + bit_end = 0; + + bit_bit_mask[pup_id] = 0; + for (bit_id = 0; bit_id <= bit_end; bit_id++) { + enum hws_search_dir search_dir_id; + for (search_dir_id = HWS_LOW2HIGH; + search_dir_id <= HWS_HIGH2LOW; + search_dir_id++) { + CHECK_STATUS + (ddr3_tip_read_training_result + (dev_num, interface_cnt, + ACCESS_TYPE_UNICAST, pup_id, + bit_id, search_dir_id, + direction, result_type, + TRAINING_LOAD_OPERATION_UNLOAD, + CS_SINGLE, + &result[search_dir_id], + 1, 0, 0)); + } + e1 = GET_TAP_RESULT(result[HWS_LOW2HIGH][0], + EDGE_1); + e2 = GET_TAP_RESULT(result[HWS_HIGH2LOW][0], + EDGE_1); + DEBUG_TRAINING_IP_ENGINE( + DEBUG_LEVEL_INFO, + ("wrapper if_id %d pup_id %d bit %d l2h 0x%x (e1 0x%x) h2l 0x%x (e2 0x%x)\n", + interface_cnt, pup_id, bit_id, + result[HWS_LOW2HIGH][0], e1, + result[HWS_HIGH2LOW][0], e2)); + /* TBD validate is valid only for tx */ + if (VALIDATE_TRAINING_LIMIT(e1, e2) == 1 && + GET_LOCK_RESULT(result[HWS_LOW2HIGH][0]) && + GET_LOCK_RESULT(result[HWS_LOW2HIGH][0])) { + /* Mark problem bits */ + bit_bit_mask[pup_id] |= 1 << bit_id; + bit_bit_mask_active = 1; + } + } /* For all bits */ + } /* For all PUPs */ + + /* Fix problem bits */ + if (bit_bit_mask_active != 0) { + u32 *l2h_if_train_res = NULL; + u32 *h2l_if_train_res = NULL; + l2h_if_train_res = + ddr3_tip_get_buf_ptr(dev_num, HWS_LOW2HIGH, + result_type, + interface_cnt); + h2l_if_train_res = + ddr3_tip_get_buf_ptr(dev_num, HWS_HIGH2LOW, + result_type, + interface_cnt); + + ddr3_tip_ip_training(dev_num, ACCESS_TYPE_UNICAST, + interface_cnt, + ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, result_type, + control_element, HWS_LOW2HIGH, + direction, interface_mask, + num_iter / 2, num_iter / 2, + pattern, EDGE_FP, train_cs_type, + cs_num, train_status); + + for (pup_id = 0; + pup_id <= (tm->num_of_bus_per_interface - 1); + pup_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup_id); + + if (bit_bit_mask[pup_id] == 0) + continue; + + for (bit_id = 0; bit_id <= bit_end; bit_id++) { + if ((bit_bit_mask[pup_id] & + (1 << bit_id)) == 0) + continue; + CHECK_STATUS + (ddr3_tip_read_training_result + (dev_num, interface_cnt, + ACCESS_TYPE_UNICAST, pup_id, + bit_id, HWS_LOW2HIGH, + direction, + result_type, + TRAINING_LOAD_OPERATION_UNLOAD, + CS_SINGLE, &l2h_if_train_res, + 0, 0, 1)); + } + } + + ddr3_tip_ip_training(dev_num, ACCESS_TYPE_UNICAST, + interface_cnt, + ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, result_type, + control_element, HWS_HIGH2LOW, + direction, interface_mask, + num_iter / 2, num_iter / 2, + pattern, EDGE_FP, train_cs_type, + cs_num, train_status); + + for (pup_id = 0; + pup_id <= (tm->num_of_bus_per_interface - 1); + pup_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup_id); + + if (bit_bit_mask[pup_id] == 0) + continue; + + for (bit_id = 0; bit_id <= bit_end; bit_id++) { + if ((bit_bit_mask[pup_id] & + (1 << bit_id)) == 0) + continue; + CHECK_STATUS + (ddr3_tip_read_training_result + (dev_num, interface_cnt, + ACCESS_TYPE_UNICAST, pup_id, + bit_id, HWS_HIGH2LOW, direction, + result_type, + TRAINING_LOAD_OPERATION_UNLOAD, + CS_SINGLE, &h2l_if_train_res, + 0, cons_tap, 1)); + } + } + } /* if bit_bit_mask_active */ + } /* For all Interfacess */ + + return MV_OK; +} + +/* + * Load phy values + */ +int ddr3_tip_load_phy_values(int b_load) +{ + u32 bus_cnt = 0, if_id, dev_num = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_cnt = 0; bus_cnt < GET_TOPOLOGY_NUM_OF_BUSES(); + bus_cnt++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_cnt); + if (b_load == 1) { + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, bus_cnt, + DDR_PHY_DATA, + WRITE_CENTRALIZATION_PHY_REG + + (effective_cs * + CS_REGISTER_ADDR_OFFSET), + &phy_reg_bk[if_id][bus_cnt] + [0])); + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, bus_cnt, + DDR_PHY_DATA, + RL_PHY_REG + + (effective_cs * + CS_REGISTER_ADDR_OFFSET), + &phy_reg_bk[if_id][bus_cnt] + [1])); + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, bus_cnt, + DDR_PHY_DATA, + READ_CENTRALIZATION_PHY_REG + + (effective_cs * + CS_REGISTER_ADDR_OFFSET), + &phy_reg_bk[if_id][bus_cnt] + [2])); + } else { + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, + bus_cnt, DDR_PHY_DATA, + WRITE_CENTRALIZATION_PHY_REG + + (effective_cs * + CS_REGISTER_ADDR_OFFSET), + phy_reg_bk[if_id][bus_cnt] + [0])); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, + bus_cnt, DDR_PHY_DATA, + RL_PHY_REG + + (effective_cs * + CS_REGISTER_ADDR_OFFSET), + phy_reg_bk[if_id][bus_cnt] + [1])); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, + bus_cnt, DDR_PHY_DATA, + READ_CENTRALIZATION_PHY_REG + + (effective_cs * + CS_REGISTER_ADDR_OFFSET), + phy_reg_bk[if_id][bus_cnt] + [2])); + } + } + } + + return MV_OK; +} + +int ddr3_tip_training_ip_test(u32 dev_num, enum hws_training_result result_type, + enum hws_search_dir search_dir, + enum hws_dir direction, + enum hws_edge_compare edge, + u32 init_val1, u32 init_val2, + u32 num_of_iterations, + u32 start_pattern, u32 end_pattern) +{ + u32 pattern, if_id, pup_id; + enum hws_training_ip_stat train_status[MAX_INTERFACE_NUM]; + u32 *res = NULL; + u32 search_state = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + ddr3_tip_load_phy_values(1); + + for (pattern = start_pattern; pattern <= end_pattern; pattern++) { + for (search_state = 0; search_state < HWS_SEARCH_DIR_LIMIT; + search_state++) { + ddr3_tip_ip_training_wrapper(dev_num, + ACCESS_TYPE_MULTICAST, 0, + ACCESS_TYPE_MULTICAST, 0, + result_type, + HWS_CONTROL_ELEMENT_ADLL, + search_dir, direction, + 0xfff, init_val1, + init_val2, + num_of_iterations, pattern, + edge, CS_SINGLE, + PARAM_NOT_CARE, + train_status); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; + if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (pup_id = 0; pup_id < + tm->num_of_bus_per_interface; + pup_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, + pup_id); + CHECK_STATUS + (ddr3_tip_read_training_result + (dev_num, if_id, + ACCESS_TYPE_UNICAST, pup_id, + ALL_BITS_PER_PUP, + search_state, + direction, result_type, + TRAINING_LOAD_OPERATION_UNLOAD, + CS_SINGLE, &res, 1, 0, + 0)); + if (result_type == RESULT_PER_BYTE) { + DEBUG_TRAINING_IP_ENGINE + (DEBUG_LEVEL_INFO, + ("search_state %d if_id %d pup_id %d 0x%x\n", + search_state, if_id, + pup_id, res[0])); + } else { + DEBUG_TRAINING_IP_ENGINE + (DEBUG_LEVEL_INFO, + ("search_state %d if_id %d pup_id %d 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", + search_state, if_id, + pup_id, res[0], + res[1], res[2], + res[3], res[4], + res[5], res[6], + res[7])); + } + } + } /* interface */ + } /* search */ + } /* pattern */ + + ddr3_tip_load_phy_values(0); + + return MV_OK; +} + +struct pattern_info *ddr3_tip_get_pattern_table() +{ + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (DDR3_IS_16BIT_DRAM_MODE(tm->bus_act_mask) == 0) + return pattern_table_32; + else + return pattern_table_16; +} + +u16 *ddr3_tip_get_mask_results_dq_reg() +{ + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (DDR3_IS_ECC_PUP3_MODE(tm->bus_act_mask)) + return mask_results_dq_reg_map_pup3_ecc; + else + return mask_results_dq_reg_map; +} + +u16 *ddr3_tip_get_mask_results_pup_reg_map() +{ + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (DDR3_IS_ECC_PUP3_MODE(tm->bus_act_mask)) + return mask_results_pup_reg_map_pup3_ecc; + else + return mask_results_pup_reg_map; +} diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h new file mode 100644 index 0000000..25b1462 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_TRAINING_IP_ENGINE_H_ +#define _DDR3_TRAINING_IP_ENGINE_H_ + +#include "ddr3_training_ip_def.h" +#include "ddr3_training_ip_flow.h" + +#define EDGE_1 0 +#define EDGE_2 1 +#define ALL_PUP_TRAINING 0xe +#define PUP_RESULT_EDGE_1_MASK 0xff +#define PUP_RESULT_EDGE_2_MASK (0xff << 8) +#define PUP_LOCK_RESULT_BIT 25 + +#define GET_TAP_RESULT(reg, edge) \ + (((edge) == EDGE_1) ? ((reg) & PUP_RESULT_EDGE_1_MASK) : \ + (((reg) & PUP_RESULT_EDGE_2_MASK) >> 8)); +#define GET_LOCK_RESULT(reg) \ + (((reg) & (1<<PUP_LOCK_RESULT_BIT)) >> PUP_LOCK_RESULT_BIT) + +#define EDGE_FAILURE 128 +#define ALL_BITS_PER_PUP 128 + +#define MIN_WINDOW_SIZE 6 +#define MAX_WINDOW_SIZE_RX 32 +#define MAX_WINDOW_SIZE_TX 64 + +int ddr3_tip_training_ip_test(u32 dev_num, enum hws_training_result result_type, + enum hws_search_dir search_dir, + enum hws_dir direction, + enum hws_edge_compare edge, + u32 init_val1, u32 init_val2, + u32 num_of_iterations, u32 start_pattern, + u32 end_pattern); +int ddr3_tip_load_pattern_to_mem(u32 dev_num, enum hws_pattern pattern); +int ddr3_tip_load_pattern_to_mem_by_cpu(u32 dev_num, enum hws_pattern pattern, + u32 offset); +int ddr3_tip_load_all_pattern_to_mem(u32 dev_num); +int ddr3_tip_read_training_result(u32 dev_num, u32 if_id, + enum hws_access_type pup_access_type, + u32 pup_num, u32 bit_num, + enum hws_search_dir search, + enum hws_dir direction, + enum hws_training_result result_type, + enum hws_training_load_op operation, + u32 cs_num_type, u32 **load_res, + int is_read_from_db, u8 cons_tap, + int is_check_result_validity); +int ddr3_tip_ip_training(u32 dev_num, enum hws_access_type access_type, + u32 interface_num, + enum hws_access_type pup_access_type, + u32 pup_num, enum hws_training_result result_type, + enum hws_control_element control_element, + enum hws_search_dir search_dir, enum hws_dir direction, + u32 interface_mask, u32 init_value, u32 num_iter, + enum hws_pattern pattern, + enum hws_edge_compare edge_comp, + enum hws_ddr_cs cs_type, u32 cs_num, + enum hws_training_ip_stat *train_status); +int ddr3_tip_ip_training_wrapper(u32 dev_num, enum hws_access_type access_type, + u32 if_id, + enum hws_access_type pup_access_type, + u32 pup_num, + enum hws_training_result result_type, + enum hws_control_element control_element, + enum hws_search_dir search_dir, + enum hws_dir direction, + u32 interface_mask, u32 init_value1, + u32 init_value2, u32 num_iter, + enum hws_pattern pattern, + enum hws_edge_compare edge_comp, + enum hws_ddr_cs train_cs_type, u32 cs_num, + enum hws_training_ip_stat *train_status); +int is_odpg_access_done(u32 dev_num, u32 if_id); +void ddr3_tip_print_bist_res(void); +struct pattern_info *ddr3_tip_get_pattern_table(void); +u16 *ddr3_tip_get_mask_results_dq_reg(void); +u16 *ddr3_tip_get_mask_results_pup_reg_map(void); + +#endif /* _DDR3_TRAINING_IP_ENGINE_H_ */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h new file mode 100644 index 0000000..22d7ce2 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h @@ -0,0 +1,349 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_TRAINING_IP_FLOW_H_ +#define _DDR3_TRAINING_IP_FLOW_H_ + +#include "ddr3_training_ip.h" +#include "ddr3_training_ip_pbs.h" + +#define MRS0_CMD 0x3 +#define MRS1_CMD 0x4 +#define MRS2_CMD 0x8 +#define MRS3_CMD 0x9 + +/* + * Definitions of INTERFACE registers + */ + +#define READ_BUFFER_SELECT 0x14a4 + +/* + * Definitions of PHY registers + */ + +#define KILLER_PATTERN_LENGTH 32 +#define EXT_ACCESS_BURST_LENGTH 8 + +#define IS_ACTIVE(if_mask , if_id) \ + ((if_mask) & (1 << (if_id))) +#define VALIDATE_ACTIVE(mask, id) \ + { \ + if (IS_ACTIVE(mask, id) == 0) \ + continue; \ + } + +#define GET_TOPOLOGY_NUM_OF_BUSES() \ + (ddr3_get_topology_map()->num_of_bus_per_interface) + +#define DDR3_IS_ECC_PUP3_MODE(if_mask) \ + (((if_mask) == 0xb) ? 1 : 0) +#define DDR3_IS_ECC_PUP4_MODE(if_mask) \ + (((((if_mask) & 0x10) == 0)) ? 0 : 1) +#define DDR3_IS_16BIT_DRAM_MODE(mask) \ + (((((mask) & 0x4) == 0)) ? 1 : 0) + +#define MEGA 1000000 +#define BUS_WIDTH_IN_BITS 8 + +/* + * DFX address Space + * Table 2: DFX address space + * Address Bits Value Description + * [31 : 20] 0x? DFX base address bases PCIe mapping + * [19 : 15] 0...Number_of_client-1 Client Index inside pipe. + * See also Table 1 Multi_cast = 29 Broadcast = 28 + * [14 : 13] 2'b01 Access to Client Internal Register + * [12 : 0] Client Internal Register offset See related Client Registers + * [14 : 13] 2'b00 Access to Ram Wrappers Internal Register + * [12 : 6] 0 Number_of_rams-1 Ram Index inside Client + * [5 : 0] Ram Wrapper Internal Register offset See related Ram Wrappers + * Registers + */ + +/* nsec */ +#define TREFI_LOW 7800 +#define TREFI_HIGH 3900 + +#define TR2R_VALUE_REG 0x180 +#define TR2R_MASK_REG 0x180 +#define TRFC_MASK_REG 0x7f +#define TR2W_MASK_REG 0x600 +#define TW2W_HIGH_VALUE_REG 0x1800 +#define TW2W_HIGH_MASK_REG 0xf800 +#define TRFC_HIGH_VALUE_REG 0x20000 +#define TRFC_HIGH_MASK_REG 0x70000 +#define TR2R_HIGH_VALUE_REG 0x0 +#define TR2R_HIGH_MASK_REG 0x380000 +#define TMOD_VALUE_REG 0x16000000 +#define TMOD_MASK_REG 0x1e000000 +#define T_VALUE_REG 0x40000000 +#define T_MASK_REG 0xc0000000 +#define AUTO_ZQC_TIMING 15384 +#define WRITE_XBAR_PORT1 0xc03f8077 +#define READ_XBAR_PORT1 0xc03f8073 +#define DISABLE_DDR_TUNING_DATA 0x02294285 +#define ENABLE_DDR_TUNING_DATA 0x12294285 + +#define ODPG_TRAINING_STATUS_REG 0x18488 +#define ODPG_TRAINING_TRIGGER_REG 0x1030 +#define ODPG_STATUS_DONE_REG 0x16fc +#define ODPG_ENABLE_REG 0x186d4 +#define ODPG_ENABLE_OFFS 0 +#define ODPG_DISABLE_OFFS 8 + +#define ODPG_TRAINING_CONTROL_REG 0x1034 +#define ODPG_OBJ1_OPCODE_REG 0x103c +#define ODPG_OBJ1_ITER_CNT_REG 0x10b4 +#define CALIB_OBJ_PRFA_REG 0x10c4 +#define ODPG_WRITE_LEVELING_DONE_CNTR_REG 0x10f8 +#define ODPG_WRITE_READ_MODE_ENABLE_REG 0x10fc +#define TRAINING_OPCODE_1_REG 0x10b4 +#define SDRAM_CONFIGURATION_REG 0x1400 +#define DDR_CONTROL_LOW_REG 0x1404 +#define SDRAM_TIMING_LOW_REG 0x1408 +#define SDRAM_TIMING_HIGH_REG 0x140c +#define SDRAM_ACCESS_CONTROL_REG 0x1410 +#define SDRAM_OPEN_PAGE_CONTROL_REG 0x1414 +#define SDRAM_OPERATION_REG 0x1418 +#define DUNIT_CONTROL_HIGH_REG 0x1424 +#define ODT_TIMING_LOW 0x1428 +#define DDR_TIMING_REG 0x142c +#define ODT_TIMING_HI_REG 0x147c +#define SDRAM_INIT_CONTROL_REG 0x1480 +#define SDRAM_ODT_CONTROL_HIGH_REG 0x1498 +#define DUNIT_ODT_CONTROL_REG 0x149c +#define READ_BUFFER_SELECT_REG 0x14a4 +#define DUNIT_MMASK_REG 0x14b0 +#define CALIB_MACHINE_CTRL_REG 0x14cc +#define DRAM_DLL_TIMING_REG 0x14e0 +#define DRAM_ZQ_INIT_TIMIMG_REG 0x14e4 +#define DRAM_ZQ_TIMING_REG 0x14e8 +#define DFS_REG 0x1528 +#define READ_DATA_SAMPLE_DELAY 0x1538 +#define READ_DATA_READY_DELAY 0x153c +#define TRAINING_REG 0x15b0 +#define TRAINING_SW_1_REG 0x15b4 +#define TRAINING_SW_2_REG 0x15b8 +#define TRAINING_PATTERN_BASE_ADDRESS_REG 0x15bc +#define TRAINING_DBG_1_REG 0x15c0 +#define TRAINING_DBG_2_REG 0x15c4 +#define TRAINING_DBG_3_REG 0x15c8 +#define RANK_CTRL_REG 0x15e0 +#define TIMING_REG 0x15e4 +#define DRAM_PHY_CONFIGURATION 0x15ec +#define MR0_REG 0x15d0 +#define MR1_REG 0x15d4 +#define MR2_REG 0x15d8 +#define MR3_REG 0x15dc +#define TIMING_REG 0x15e4 +#define ODPG_CTRL_CONTROL_REG 0x1600 +#define ODPG_DATA_CONTROL_REG 0x1630 +#define ODPG_PATTERN_ADDR_OFFSET_REG 0x1638 +#define ODPG_DATA_BUF_SIZE_REG 0x163c +#define PHY_LOCK_STATUS_REG 0x1674 +#define PHY_REG_FILE_ACCESS 0x16a0 +#define TRAINING_WRITE_LEVELING_REG 0x16ac +#define ODPG_PATTERN_ADDR_REG 0x16b0 +#define ODPG_PATTERN_DATA_HI_REG 0x16b4 +#define ODPG_PATTERN_DATA_LOW_REG 0x16b8 +#define ODPG_BIST_LAST_FAIL_ADDR_REG 0x16bc +#define ODPG_BIST_DATA_ERROR_COUNTER_REG 0x16c0 +#define ODPG_BIST_FAILED_DATA_HI_REG 0x16c4 +#define ODPG_BIST_FAILED_DATA_LOW_REG 0x16c8 +#define ODPG_WRITE_DATA_ERROR_REG 0x16cc +#define CS_ENABLE_REG 0x16d8 +#define WR_LEVELING_DQS_PATTERN_REG 0x16dc + +#define ODPG_BIST_DONE 0x186d4 +#define ODPG_BIST_DONE_BIT_OFFS 0 +#define ODPG_BIST_DONE_BIT_VALUE 0 + +#define RESULT_CONTROL_BYTE_PUP_0_REG 0x1830 +#define RESULT_CONTROL_BYTE_PUP_1_REG 0x1834 +#define RESULT_CONTROL_BYTE_PUP_2_REG 0x1838 +#define RESULT_CONTROL_BYTE_PUP_3_REG 0x183c +#define RESULT_CONTROL_BYTE_PUP_4_REG 0x18b0 + +#define RESULT_CONTROL_PUP_0_BIT_0_REG 0x18b4 +#define RESULT_CONTROL_PUP_0_BIT_1_REG 0x18b8 +#define RESULT_CONTROL_PUP_0_BIT_2_REG 0x18bc +#define RESULT_CONTROL_PUP_0_BIT_3_REG 0x18c0 +#define RESULT_CONTROL_PUP_0_BIT_4_REG 0x18c4 +#define RESULT_CONTROL_PUP_0_BIT_5_REG 0x18c8 +#define RESULT_CONTROL_PUP_0_BIT_6_REG 0x18cc +#define RESULT_CONTROL_PUP_0_BIT_7_REG 0x18f0 +#define RESULT_CONTROL_PUP_1_BIT_0_REG 0x18f4 +#define RESULT_CONTROL_PUP_1_BIT_1_REG 0x18f8 +#define RESULT_CONTROL_PUP_1_BIT_2_REG 0x18fc +#define RESULT_CONTROL_PUP_1_BIT_3_REG 0x1930 +#define RESULT_CONTROL_PUP_1_BIT_4_REG 0x1934 +#define RESULT_CONTROL_PUP_1_BIT_5_REG 0x1938 +#define RESULT_CONTROL_PUP_1_BIT_6_REG 0x193c +#define RESULT_CONTROL_PUP_1_BIT_7_REG 0x19b0 +#define RESULT_CONTROL_PUP_2_BIT_0_REG 0x19b4 +#define RESULT_CONTROL_PUP_2_BIT_1_REG 0x19b8 +#define RESULT_CONTROL_PUP_2_BIT_2_REG 0x19bc +#define RESULT_CONTROL_PUP_2_BIT_3_REG 0x19c0 +#define RESULT_CONTROL_PUP_2_BIT_4_REG 0x19c4 +#define RESULT_CONTROL_PUP_2_BIT_5_REG 0x19c8 +#define RESULT_CONTROL_PUP_2_BIT_6_REG 0x19cc +#define RESULT_CONTROL_PUP_2_BIT_7_REG 0x19f0 +#define RESULT_CONTROL_PUP_3_BIT_0_REG 0x19f4 +#define RESULT_CONTROL_PUP_3_BIT_1_REG 0x19f8 +#define RESULT_CONTROL_PUP_3_BIT_2_REG 0x19fc +#define RESULT_CONTROL_PUP_3_BIT_3_REG 0x1a30 +#define RESULT_CONTROL_PUP_3_BIT_4_REG 0x1a34 +#define RESULT_CONTROL_PUP_3_BIT_5_REG 0x1a38 +#define RESULT_CONTROL_PUP_3_BIT_6_REG 0x1a3c +#define RESULT_CONTROL_PUP_3_BIT_7_REG 0x1ab0 +#define RESULT_CONTROL_PUP_4_BIT_0_REG 0x1ab4 +#define RESULT_CONTROL_PUP_4_BIT_1_REG 0x1ab8 +#define RESULT_CONTROL_PUP_4_BIT_2_REG 0x1abc +#define RESULT_CONTROL_PUP_4_BIT_3_REG 0x1ac0 +#define RESULT_CONTROL_PUP_4_BIT_4_REG 0x1ac4 +#define RESULT_CONTROL_PUP_4_BIT_5_REG 0x1ac8 +#define RESULT_CONTROL_PUP_4_BIT_6_REG 0x1acc +#define RESULT_CONTROL_PUP_4_BIT_7_REG 0x1af0 + +#define WL_PHY_REG 0x0 +#define WRITE_CENTRALIZATION_PHY_REG 0x1 +#define RL_PHY_REG 0x2 +#define READ_CENTRALIZATION_PHY_REG 0x3 +#define PBS_RX_PHY_REG 0x50 +#define PBS_TX_PHY_REG 0x10 +#define PHY_CONTROL_PHY_REG 0x90 +#define BW_PHY_REG 0x92 +#define RATE_PHY_REG 0x94 +#define CMOS_CONFIG_PHY_REG 0xa2 +#define PAD_ZRI_CALIB_PHY_REG 0xa4 +#define PAD_ODT_CALIB_PHY_REG 0xa6 +#define PAD_CONFIG_PHY_REG 0xa8 +#define PAD_PRE_DISABLE_PHY_REG 0xa9 +#define TEST_ADLL_REG 0xbf +#define CSN_IOB_VREF_REG(cs) (0xdb + (cs * 12)) +#define CSN_IO_BASE_VREF_REG(cs) (0xd0 + (cs * 12)) + +#define RESULT_DB_PHY_REG_ADDR 0xc0 +#define RESULT_DB_PHY_REG_RX_OFFSET 5 +#define RESULT_DB_PHY_REG_TX_OFFSET 0 + +/* TBD - for NP5 use only CS 0 */ +#define PHY_WRITE_DELAY(cs) WL_PHY_REG +/*( ( _cs_ == 0 ) ? 0x0 : 0x4 )*/ +/* TBD - for NP5 use only CS 0 */ +#define PHY_READ_DELAY(cs) RL_PHY_REG + +#define DDR0_ADDR_1 0xf8258 +#define DDR0_ADDR_2 0xf8254 +#define DDR1_ADDR_1 0xf8270 +#define DDR1_ADDR_2 0xf8270 +#define DDR2_ADDR_1 0xf825c +#define DDR2_ADDR_2 0xf825c +#define DDR3_ADDR_1 0xf8264 +#define DDR3_ADDR_2 0xf8260 +#define DDR4_ADDR_1 0xf8274 +#define DDR4_ADDR_2 0xf8274 + +#define GENERAL_PURPOSE_RESERVED0_REG 0x182e0 + +#define GET_BLOCK_ID_MAX_FREQ(dev_num, block_id) 800000 +#define CS0_RD_LVL_REF_DLY_OFFS 0 +#define CS0_RD_LVL_REF_DLY_LEN 0 +#define CS0_RD_LVL_PH_SEL_OFFS 0 +#define CS0_RD_LVL_PH_SEL_LEN 0 + +#define CS_REGISTER_ADDR_OFFSET 4 +#define CALIBRATED_OBJECTS_REG_ADDR_OFFSET 0x10 + +#define MAX_POLLING_ITERATIONS 100000 + +#define PHASE_REG_OFFSET 32 +#define NUM_BYTES_IN_BURST 31 +#define NUM_OF_CS 4 +#define CS_REG_VALUE(cs_num) (cs_mask_reg[cs_num]) +#define ADLL_LENGTH 32 + +struct write_supp_result { + enum hws_wl_supp stage; + int is_pup_fail; +}; + +struct page_element { + enum hws_page_size page_size_8bit; + /* page size in 8 bits bus width */ + enum hws_page_size page_size_16bit; + /* page size in 16 bits bus width */ + u32 ui_page_mask; + /* Mask used in register */ +}; + +int ddr3_tip_write_leveling_static_config(u32 dev_num, u32 if_id, + enum hws_ddr_freq frequency, + u32 *round_trip_delay_arr); +int ddr3_tip_read_leveling_static_config(u32 dev_num, u32 if_id, + enum hws_ddr_freq frequency, + u32 *total_round_trip_delay_arr); +int ddr3_tip_if_write(u32 dev_num, enum hws_access_type interface_access, + u32 if_id, u32 reg_addr, u32 data_value, u32 mask); +int ddr3_tip_if_polling(u32 dev_num, enum hws_access_type access_type, + u32 if_id, u32 exp_value, u32 mask, u32 offset, + u32 poll_tries); +int ddr3_tip_if_read(u32 dev_num, enum hws_access_type interface_access, + u32 if_id, u32 reg_addr, u32 *data, u32 mask); +int ddr3_tip_bus_read_modify_write(u32 dev_num, + enum hws_access_type access_type, + u32 if_id, u32 phy_id, + enum hws_ddr_phy phy_type, + u32 reg_addr, u32 data_value, u32 reg_mask); +int ddr3_tip_bus_read(u32 dev_num, u32 if_id, enum hws_access_type phy_access, + u32 phy_id, enum hws_ddr_phy phy_type, u32 reg_addr, + u32 *data); +int ddr3_tip_bus_write(u32 dev_num, enum hws_access_type e_interface_access, + u32 if_id, enum hws_access_type e_phy_access, u32 phy_id, + enum hws_ddr_phy e_phy_type, u32 reg_addr, + u32 data_value); +int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type e_access, u32 if_id, + enum hws_ddr_freq memory_freq); +int ddr3_tip_adjust_dqs(u32 dev_num); +int ddr3_tip_init_controller(u32 dev_num); +int ddr3_tip_ext_read(u32 dev_num, u32 if_id, u32 reg_addr, + u32 num_of_bursts, u32 *addr); +int ddr3_tip_ext_write(u32 dev_num, u32 if_id, u32 reg_addr, + u32 num_of_bursts, u32 *addr); +int ddr3_tip_dynamic_read_leveling(u32 dev_num, u32 ui_freq); +int ddr3_tip_legacy_dynamic_read_leveling(u32 dev_num); +int ddr3_tip_dynamic_per_bit_read_leveling(u32 dev_num, u32 ui_freq); +int ddr3_tip_legacy_dynamic_write_leveling(u32 dev_num); +int ddr3_tip_dynamic_write_leveling(u32 dev_num); +int ddr3_tip_dynamic_write_leveling_supp(u32 dev_num); +int ddr3_tip_static_init_controller(u32 dev_num); +int ddr3_tip_configure_phy(u32 dev_num); +int ddr3_tip_load_pattern_to_odpg(u32 dev_num, enum hws_access_type access_type, + u32 if_id, enum hws_pattern pattern, + u32 load_addr); +int ddr3_tip_load_pattern_to_mem(u32 dev_num, enum hws_pattern e_pattern); +int ddr3_tip_configure_odpg(u32 dev_num, enum hws_access_type access_type, + u32 if_id, enum hws_dir direction, u32 tx_phases, + u32 tx_burst_size, u32 rx_phases, + u32 delay_between_burst, u32 rd_mode, u32 cs_num, + u32 addr_stress_jump, u32 single_pattern); +int ddr3_tip_set_atr(u32 dev_num, u32 flag_id, u32 value); +int ddr3_tip_write_mrs_cmd(u32 dev_num, u32 *cs_mask_arr, u32 cmd, u32 data, + u32 mask); +int ddr3_tip_write_cs_result(u32 dev_num, u32 offset); +int ddr3_tip_get_first_active_if(u8 dev_num, u32 interface_mask, u32 *if_id); +int ddr3_tip_reset_fifo_ptr(u32 dev_num); +int read_pup_value(int pup_values[MAX_INTERFACE_NUM * MAX_BUS_NUM], + int reg_addr, u32 mask); +int read_adll_value(u32 pup_values[MAX_INTERFACE_NUM * MAX_BUS_NUM], + int reg_addr, u32 mask); +int write_adll_value(u32 pup_values[MAX_INTERFACE_NUM * MAX_BUS_NUM], + int reg_addr); +int ddr3_tip_tune_training_params(u32 dev_num, + struct tune_train_params *params); + +#endif /* _DDR3_TRAINING_IP_FLOW_H_ */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_pbs.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_pbs.h new file mode 100644 index 0000000..c6be67c --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_pbs.h @@ -0,0 +1,41 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_TRAINING_IP_PBS_H_ +#define _DDR3_TRAINING_IP_PBS_H_ + +enum { + EBA_CONFIG, + EEBA_CONFIG, + SBA_CONFIG +}; + +enum hws_training_load_op { + TRAINING_LOAD_OPERATION_UNLOAD, + TRAINING_LOAD_OPERATION_LOAD +}; + +enum hws_edge { + TRAINING_EDGE_1, + TRAINING_EDGE_2 +}; + +enum hws_edge_search { + TRAINING_EDGE_MAX, + TRAINING_EDGE_MIN +}; + +enum pbs_dir { + PBS_TX_MODE = 0, + PBS_RX_MODE, + NUM_OF_PBS_MODES +}; + +int ddr3_tip_pbs_rx(u32 dev_num); +int ddr3_tip_print_all_pbs_result(u32 dev_num); +int ddr3_tip_pbs_tx(u32 dev_num); + +#endif /* _DDR3_TRAINING_IP_PBS_H_ */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_prv_if.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_prv_if.h new file mode 100644 index 0000000..724b106 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_prv_if.h @@ -0,0 +1,107 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_TRAINING_IP_PRV_IF_H +#define _DDR3_TRAINING_IP_PRV_IF_H + +#include "ddr3_training_ip.h" +#include "ddr3_training_ip_flow.h" +#include "ddr3_training_ip_bist.h" + +enum hws_static_config_type { + WRITE_LEVELING_STATIC, + READ_LEVELING_STATIC +}; + +struct ddr3_device_info { + u32 device_id; + u32 ck_delay; +}; + +typedef int (*HWS_TIP_DUNIT_MUX_SELECT_FUNC_PTR)(u8 dev_num, int enable); +typedef int (*HWS_TIP_DUNIT_REG_READ_FUNC_PTR)( + u8 dev_num, enum hws_access_type interface_access, u32 if_id, + u32 offset, u32 *data, u32 mask); +typedef int (*HWS_TIP_DUNIT_REG_WRITE_FUNC_PTR)( + u8 dev_num, enum hws_access_type interface_access, u32 if_id, + u32 offset, u32 data, u32 mask); +typedef int (*HWS_TIP_GET_FREQ_CONFIG_INFO)( + u8 dev_num, enum hws_ddr_freq freq, + struct hws_tip_freq_config_info *freq_config_info); +typedef int (*HWS_TIP_GET_DEVICE_INFO)( + u8 dev_num, struct ddr3_device_info *info_ptr); +typedef int (*HWS_GET_CS_CONFIG_FUNC_PTR)( + u8 dev_num, u32 cs_mask, struct hws_cs_config_info *cs_info); +typedef int (*HWS_SET_FREQ_DIVIDER_FUNC_PTR)( + u8 dev_num, u32 if_id, enum hws_ddr_freq freq); +typedef int (*HWS_GET_INIT_FREQ)(u8 dev_num, enum hws_ddr_freq *freq); +typedef int (*HWS_TRAINING_IP_IF_WRITE_FUNC_PTR)( + u32 dev_num, enum hws_access_type access_type, u32 dunit_id, + u32 reg_addr, u32 data, u32 mask); +typedef int (*HWS_TRAINING_IP_IF_READ_FUNC_PTR)( + u32 dev_num, enum hws_access_type access_type, u32 dunit_id, + u32 reg_addr, u32 *data, u32 mask); +typedef int (*HWS_TRAINING_IP_BUS_WRITE_FUNC_PTR)( + u32 dev_num, enum hws_access_type dunit_access_type, u32 if_id, + enum hws_access_type phy_access_type, u32 phy_id, + enum hws_ddr_phy phy_type, u32 reg_addr, u32 data); +typedef int (*HWS_TRAINING_IP_BUS_READ_FUNC_PTR)( + u32 dev_num, u32 if_id, enum hws_access_type phy_access_type, + u32 phy_id, enum hws_ddr_phy phy_type, u32 reg_addr, u32 *data); +typedef int (*HWS_TRAINING_IP_ALGO_RUN_FUNC_PTR)( + u32 dev_num, enum hws_algo_type algo_type); +typedef int (*HWS_TRAINING_IP_SET_FREQ_FUNC_PTR)( + u32 dev_num, enum hws_access_type access_type, u32 if_id, + enum hws_ddr_freq frequency); +typedef int (*HWS_TRAINING_IP_INIT_CONTROLLER_FUNC_PTR)( + u32 dev_num, struct init_cntr_param *init_cntr_prm); +typedef int (*HWS_TRAINING_IP_PBS_RX_FUNC_PTR)(u32 dev_num); +typedef int (*HWS_TRAINING_IP_PBS_TX_FUNC_PTR)(u32 dev_num); +typedef int (*HWS_TRAINING_IP_SELECT_CONTROLLER_FUNC_PTR)( + u32 dev_num, int enable); +typedef int (*HWS_TRAINING_IP_TOPOLOGY_MAP_LOAD_FUNC_PTR)( + u32 dev_num, struct hws_topology_map *topology_map); +typedef int (*HWS_TRAINING_IP_STATIC_CONFIG_FUNC_PTR)( + u32 dev_num, enum hws_ddr_freq frequency, + enum hws_static_config_type static_config_type, u32 if_id); +typedef int (*HWS_TRAINING_IP_EXTERNAL_READ_PTR)( + u32 dev_num, u32 if_id, u32 ddr_addr, u32 num_bursts, u32 *data); +typedef int (*HWS_TRAINING_IP_EXTERNAL_WRITE_PTR)( + u32 dev_num, u32 if_id, u32 ddr_addr, u32 num_bursts, u32 *data); +typedef int (*HWS_TRAINING_IP_BIST_ACTIVATE)( + u32 dev_num, enum hws_pattern pattern, enum hws_access_type access_type, + u32 if_num, enum hws_dir direction, + enum hws_stress_jump addr_stress_jump, + enum hws_pattern_duration duration, + enum hws_bist_operation oper_type, u32 offset, u32 cs_num, + u32 pattern_addr_length); +typedef int (*HWS_TRAINING_IP_BIST_READ_RESULT)( + u32 dev_num, u32 if_id, struct bist_result *pst_bist_result); +typedef int (*HWS_TRAINING_IP_LOAD_TOPOLOGY)(u32 dev_num, u32 config_num); +typedef int (*HWS_TRAINING_IP_READ_LEVELING)(u32 dev_num, u32 config_num); +typedef int (*HWS_TRAINING_IP_WRITE_LEVELING)(u32 dev_num, u32 config_num); +typedef u32 (*HWS_TRAINING_IP_GET_TEMP)(u8 dev_num); + +struct hws_tip_config_func_db { + HWS_TIP_DUNIT_MUX_SELECT_FUNC_PTR tip_dunit_mux_select_func; + HWS_TIP_DUNIT_REG_READ_FUNC_PTR tip_dunit_read_func; + HWS_TIP_DUNIT_REG_WRITE_FUNC_PTR tip_dunit_write_func; + HWS_TIP_GET_FREQ_CONFIG_INFO tip_get_freq_config_info_func; + HWS_TIP_GET_DEVICE_INFO tip_get_device_info_func; + HWS_SET_FREQ_DIVIDER_FUNC_PTR tip_set_freq_divider_func; + HWS_GET_CS_CONFIG_FUNC_PTR tip_get_cs_config_info; + HWS_TRAINING_IP_GET_TEMP tip_get_temperature; +}; + +int ddr3_tip_init_config_func(u32 dev_num, + struct hws_tip_config_func_db *config_func); +int ddr3_tip_register_xsb_info(u32 dev_num, + struct hws_xsb_info *xsb_info_table); +enum hws_result *ddr3_tip_get_result_ptr(u32 stage); +int ddr3_set_freq_config_info(struct hws_tip_freq_config_info *table); +int print_device_info(u8 dev_num); + +#endif /* _DDR3_TRAINING_IP_PRV_IF_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_static.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_static.h new file mode 100644 index 0000000..878068b --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_static.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_TRAINING_IP_STATIC_H_ +#define _DDR3_TRAINING_IP_STATIC_H_ + +#include "ddr3_training_ip_def.h" +#include "ddr3_training_ip.h" + +struct trip_delay_element { + u32 dqs_delay; /* DQS delay (m_sec) */ + u32 ck_delay; /* CK Delay (m_sec) */ +}; + +struct hws_tip_static_config_info { + u32 silicon_delay; + struct trip_delay_element *package_trace_arr; + struct trip_delay_element *board_trace_arr; +}; + +int ddr3_tip_run_static_alg(u32 dev_num, enum hws_ddr_freq freq); +int ddr3_tip_init_static_config_db( + u32 dev_num, struct hws_tip_static_config_info *static_config_info); +int ddr3_tip_init_specific_reg_config(u32 dev_num, + struct reg_data *reg_config_arr); +int ddr3_tip_static_phy_init_controller(u32 dev_num); + +#endif /* _DDR3_TRAINING_IP_STATIC_H_ */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c new file mode 100644 index 0000000..3c40f19 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c @@ -0,0 +1,1836 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +#define WL_ITERATION_NUM 10 +#define ONE_CLOCK_ERROR_SHIFT 2 +#define ALIGN_ERROR_SHIFT -2 + +static u32 pup_mask_table[] = { + 0x000000ff, + 0x0000ff00, + 0x00ff0000, + 0xff000000 +}; + +static struct write_supp_result wr_supp_res[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + +static int ddr3_tip_dynamic_write_leveling_seq(u32 dev_num); +static int ddr3_tip_dynamic_read_leveling_seq(u32 dev_num); +static int ddr3_tip_dynamic_per_bit_read_leveling_seq(u32 dev_num); +static int ddr3_tip_wl_supp_align_err_shift(u32 dev_num, u32 if_id, u32 bus_id, + u32 bus_id_delta); +static int ddr3_tip_wl_supp_align_phase_shift(u32 dev_num, u32 if_id, + u32 bus_id, u32 offset, + u32 bus_id_delta); +static int ddr3_tip_xsb_compare_test(u32 dev_num, u32 if_id, u32 bus_id, + u32 edge_offset, u32 bus_id_delta); +static int ddr3_tip_wl_supp_one_clk_err_shift(u32 dev_num, u32 if_id, + u32 bus_id, u32 bus_id_delta); + +u32 hws_ddr3_tip_max_cs_get(void) +{ + u32 c_cs; + static u32 max_cs; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (!max_cs) { + for (c_cs = 0; c_cs < NUM_OF_CS; c_cs++) { + VALIDATE_ACTIVE(tm-> + interface_params[0].as_bus_params[0]. + cs_bitmask, c_cs); + max_cs++; + } + } + + return max_cs; +} + +/***************************************************************************** +Dynamic read leveling +******************************************************************************/ +int ddr3_tip_dynamic_read_leveling(u32 dev_num, u32 freq) +{ + u32 data, mask; + u32 max_cs = hws_ddr3_tip_max_cs_get(); + u32 bus_num, if_id, cl_val; + enum hws_speed_bin speed_bin_index; + /* save current CS value */ + u32 cs_enable_reg_val[MAX_INTERFACE_NUM] = { 0 }; + int is_any_pup_fail = 0; + u32 data_read[MAX_INTERFACE_NUM + 1] = { 0 }; + u8 rl_values[NUM_OF_CS][MAX_BUS_NUM][MAX_INTERFACE_NUM]; + struct pattern_info *pattern_table = ddr3_tip_get_pattern_table(); + u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + if (rl_version == 0) { + /* OLD RL machine */ + data = 0x40; + data |= (1 << 20); + + /* TBD multi CS */ + CHECK_STATUS(ddr3_tip_if_write( + dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, TRAINING_REG, + data, 0x11ffff)); + CHECK_STATUS(ddr3_tip_if_write( + dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, + TRAINING_PATTERN_BASE_ADDRESS_REG, + 0, 0xfffffff8)); + CHECK_STATUS(ddr3_tip_if_write( + dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, TRAINING_REG, + (u32)(1 << 31), (u32)(1 << 31))); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + training_result[training_stage][if_id] = TEST_SUCCESS; + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0, + (u32)(1 << 31), TRAINING_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_LEVELING( + DEBUG_LEVEL_ERROR, + ("RL: DDR3 poll failed(1) IF %d\n", + if_id)); + training_result[training_stage][if_id] = + TEST_FAILED; + + if (debug_mode == 0) + return MV_FAIL; + } + } + + /* read read-leveling result */ + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_REG, data_read, 1 << 30)); + /* exit read leveling mode */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x8, 0x9)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_SW_1_REG, 1 << 16, 1 << 16)); + + /* disable RL machine all Trn_CS[3:0] , [16:0] */ + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_REG, 0, 0xf1ffff)); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + if ((data_read[if_id] & (1 << 30)) == 0) { + DEBUG_LEVELING( + DEBUG_LEVEL_ERROR, + ("\n_read Leveling failed for IF %d\n", + if_id)); + training_result[training_stage][if_id] = + TEST_FAILED; + if (debug_mode == 0) + return MV_FAIL; + } + } + return MV_OK; + } + + /* NEW RL machine */ + for (effective_cs = 0; effective_cs < NUM_OF_CS; effective_cs++) + for (bus_num = 0; bus_num < MAX_BUS_NUM; bus_num++) + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) + rl_values[effective_cs][bus_num][if_id] = 0; + + for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + training_result[training_stage][if_id] = TEST_SUCCESS; + + /* save current cs enable reg val */ + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, + CS_ENABLE_REG, cs_enable_reg_val, + MASK_ALL_BITS)); + /* enable single cs */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + CS_ENABLE_REG, (1 << 3), (1 << 3))); + } + + ddr3_tip_reset_fifo_ptr(dev_num); + + /* + * Phase 1: Load pattern (using ODPG) + * + * enter Read Leveling mode + * only 27 bits are masked + * assuming non multi-CS configuration + * write to CS = 0 for the non multi CS configuration, note + * that the results shall be read back to the required CS !!! + */ + + /* BUS count is 0 shifted 26 */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_DATA_CONTROL_REG, 0x3, 0x3)); + CHECK_STATUS(ddr3_tip_configure_odpg + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0, + pattern_table[PATTERN_RL].num_of_phases_tx, 0, + pattern_table[PATTERN_RL].num_of_phases_rx, 0, 0, + effective_cs, STRESS_NONE, DURATION_SINGLE)); + + /* load pattern to ODPG */ + ddr3_tip_load_pattern_to_odpg(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, PATTERN_RL, + pattern_table[PATTERN_RL]. + start_addr); + + /* + * Phase 2: ODPG to Read Leveling mode + */ + + /* General Training Opcode register */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_WRITE_READ_MODE_ENABLE_REG, 0, + MASK_ALL_BITS)); + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_TRAINING_CONTROL_REG, + (0x301b01 | effective_cs << 2), 0x3c3fef)); + + /* Object1 opcode register 0 & 1 */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + speed_bin_index = + tm->interface_params[if_id].speed_bin_index; + cl_val = + cas_latency_table[speed_bin_index].cl_val[freq]; + data = (cl_val << 17) | (0x3 << 25); + mask = (0xff << 9) | (0x1f << 17) | (0x3 << 25); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ODPG_OBJ1_OPCODE_REG, data, mask)); + } + + /* Set iteration count to max value */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_OPCODE_1_REG, 0xd00, 0xd00)); + + /* + * Phase 2: Mask config + */ + + ddr3_tip_dynamic_read_leveling_seq(dev_num); + + /* + * Phase 3: Read Leveling execution + */ + + /* temporary jira dunit=14751 */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_DBG_1_REG, 0, (u32)(1 << 31))); + /* configure phy reset value */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_DBG_3_REG, (0x7f << 24), + (u32)(0xff << 24))); + /* data pup rd reset enable */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + SDRAM_CONFIGURATION_REG, 0, (1 << 30))); + /* data pup rd reset disable */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + SDRAM_CONFIGURATION_REG, (1 << 30), (1 << 30))); + /* training SW override & training RL mode */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x1, 0x9)); + /* training enable */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_REG, (1 << 24) | (1 << 20), + (1 << 24) | (1 << 20))); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_REG, (u32)(1 << 31), (u32)(1 << 31))); + + /********* trigger training *******************/ + /* Trigger, poll on status and disable ODPG */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_TRAINING_TRIGGER_REG, 0x1, 0x1)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_TRAINING_STATUS_REG, 0x1, 0x1)); + + /* check for training done + results pass */ + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x2, 0x2, + ODPG_TRAINING_STATUS_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_LEVELING(DEBUG_LEVEL_ERROR, + ("Training Done Failed\n")); + return MV_FAIL; + } + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, + if_id, + ODPG_TRAINING_TRIGGER_REG, data_read, + 0x4)); + data = data_read[if_id]; + if (data != 0x0) { + DEBUG_LEVELING(DEBUG_LEVEL_ERROR, + ("Training Result Failed\n")); + } + } + + /*disable ODPG - Back to functional mode */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_ENABLE_REG, 0x1 << ODPG_DISABLE_OFFS, + (0x1 << ODPG_DISABLE_OFFS))); + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x0, 0x1, + ODPG_ENABLE_REG, MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_LEVELING(DEBUG_LEVEL_ERROR, + ("ODPG disable failed ")); + return MV_FAIL; + } + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_DATA_CONTROL_REG, 0, MASK_ALL_BITS)); + + /* double loop on bus, pup */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + /* check training done */ + is_any_pup_fail = 0; + for (bus_num = 0; + bus_num < tm->num_of_bus_per_interface; + bus_num++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_num); + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_UNICAST, + if_id, (1 << 25), (1 << 25), + mask_results_pup_reg_map[bus_num], + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_LEVELING(DEBUG_LEVEL_ERROR, + ("\n_r_l: DDR3 poll failed(2) for bus %d", + bus_num)); + is_any_pup_fail = 1; + } else { + /* read result per pup */ + CHECK_STATUS(ddr3_tip_if_read + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + mask_results_pup_reg_map + [bus_num], data_read, + 0xff)); + rl_values[effective_cs][bus_num] + [if_id] = (u8)data_read[if_id]; + } + } + + if (is_any_pup_fail == 1) { + training_result[training_stage][if_id] = + TEST_FAILED; + if (debug_mode == 0) + return MV_FAIL; + } + } + + DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("RL exit read leveling\n")); + + /* + * Phase 3: Exit Read Leveling + */ + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, (1 << 3), (1 << 3))); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_SW_1_REG, (1 << 16), (1 << 16))); + /* set ODPG to functional */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_DATA_CONTROL_REG, 0x0, MASK_ALL_BITS)); + + /* + * Copy the result from the effective CS search to the + * real Functional CS + */ + /*ddr3_tip_write_cs_result(dev_num, RL_PHY_REG); */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_DATA_CONTROL_REG, 0x0, MASK_ALL_BITS)); + } + + for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { + /* double loop on bus, pup */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_num = 0; + bus_num < tm->num_of_bus_per_interface; + bus_num++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_num); + /* read result per pup from arry */ + data = rl_values[effective_cs][bus_num][if_id]; + data = (data & 0x1f) | + (((data & 0xe0) >> 5) << 6); + ddr3_tip_bus_write(dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, + bus_num, DDR_PHY_DATA, + RL_PHY_REG + + ((effective_cs == + 0) ? 0x0 : 0x4), data); + } + } + } + /* Set to 0 after each loop to avoid illegal value may be used */ + effective_cs = 0; + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + /* restore cs enable value */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + CS_ENABLE_REG, cs_enable_reg_val[if_id], + MASK_ALL_BITS)); + if (odt_config != 0) { + CHECK_STATUS(ddr3_tip_write_additional_odt_setting + (dev_num, if_id)); + } + } + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + if (training_result[training_stage][if_id] == TEST_FAILED) + return MV_FAIL; + } + + return MV_OK; +} + +/* + * Legacy Dynamic write leveling + */ +int ddr3_tip_legacy_dynamic_write_leveling(u32 dev_num) +{ + u32 c_cs, if_id, cs_mask = 0; + u32 max_cs = hws_ddr3_tip_max_cs_get(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* + * In TRAINIUNG reg (0x15b0) write 0x80000008 | cs_mask: + * Trn_start + * cs_mask = 0x1 <<20 Trn_CS0 - CS0 is included in the DDR3 training + * cs_mask = 0x1 <<21 Trn_CS1 - CS1 is included in the DDR3 training + * cs_mask = 0x1 <<22 Trn_CS2 - CS2 is included in the DDR3 training + * cs_mask = 0x1 <<23 Trn_CS3 - CS3 is included in the DDR3 training + * Trn_auto_seq = write leveling + */ + for (c_cs = 0; c_cs < max_cs; c_cs++) + cs_mask = cs_mask | 1 << (20 + c_cs); + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, 0, + TRAINING_REG, (0x80000008 | cs_mask), + 0xffffffff)); + mdelay(20); + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0, + (u32)0x80000000, TRAINING_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_LEVELING(DEBUG_LEVEL_ERROR, + ("polling failed for Old WL result\n")); + return MV_FAIL; + } + } + + return MV_OK; +} + +/* + * Legacy Dynamic read leveling + */ +int ddr3_tip_legacy_dynamic_read_leveling(u32 dev_num) +{ + u32 c_cs, if_id, cs_mask = 0; + u32 max_cs = hws_ddr3_tip_max_cs_get(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* + * In TRAINIUNG reg (0x15b0) write 0x80000040 | cs_mask: + * Trn_start + * cs_mask = 0x1 <<20 Trn_CS0 - CS0 is included in the DDR3 training + * cs_mask = 0x1 <<21 Trn_CS1 - CS1 is included in the DDR3 training + * cs_mask = 0x1 <<22 Trn_CS2 - CS2 is included in the DDR3 training + * cs_mask = 0x1 <<23 Trn_CS3 - CS3 is included in the DDR3 training + * Trn_auto_seq = Read Leveling using training pattern + */ + for (c_cs = 0; c_cs < max_cs; c_cs++) + cs_mask = cs_mask | 1 << (20 + c_cs); + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, 0, TRAINING_REG, + (0x80000040 | cs_mask), 0xffffffff)); + mdelay(100); + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0, + (u32)0x80000000, TRAINING_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_LEVELING(DEBUG_LEVEL_ERROR, + ("polling failed for Old RL result\n")); + return MV_FAIL; + } + } + + return MV_OK; +} + +/* + * Dynamic per bit read leveling + */ +int ddr3_tip_dynamic_per_bit_read_leveling(u32 dev_num, u32 freq) +{ + u32 data, mask; + u32 bus_num, if_id, cl_val, bit_num; + u32 curr_numb, curr_min_delay; + int adll_array[3] = { 0, -0xa, 0x14 }; + u32 phyreg3_arr[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + enum hws_speed_bin speed_bin_index; + int is_any_pup_fail = 0; + int break_loop = 0; + u32 cs_enable_reg_val[MAX_INTERFACE_NUM]; /* save current CS value */ + u32 data_read[MAX_INTERFACE_NUM]; + int per_bit_rl_pup_status[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + u32 data2_write[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + struct pattern_info *pattern_table = ddr3_tip_get_pattern_table(); + u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_num = 0; + bus_num <= tm->num_of_bus_per_interface; bus_num++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_num); + per_bit_rl_pup_status[if_id][bus_num] = 0; + data2_write[if_id][bus_num] = 0; + /* read current value of phy register 0x3 */ + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, ACCESS_TYPE_UNICAST, + bus_num, DDR_PHY_DATA, + READ_CENTRALIZATION_PHY_REG, + &phyreg3_arr[if_id][bus_num])); + } + } + + /* NEW RL machine */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + training_result[training_stage][if_id] = TEST_SUCCESS; + + /* save current cs enable reg val */ + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, + CS_ENABLE_REG, &cs_enable_reg_val[if_id], + MASK_ALL_BITS)); + /* enable single cs */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + CS_ENABLE_REG, (1 << 3), (1 << 3))); + } + + ddr3_tip_reset_fifo_ptr(dev_num); + for (curr_numb = 0; curr_numb < 3; curr_numb++) { + /* + * Phase 1: Load pattern (using ODPG) + * + * enter Read Leveling mode + * only 27 bits are masked + * assuming non multi-CS configuration + * write to CS = 0 for the non multi CS configuration, note that + * the results shall be read back to the required CS !!! + */ + + /* BUS count is 0 shifted 26 */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_DATA_CONTROL_REG, 0x3, 0x3)); + CHECK_STATUS(ddr3_tip_configure_odpg + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0, + pattern_table[PATTERN_TEST].num_of_phases_tx, 0, + pattern_table[PATTERN_TEST].num_of_phases_rx, 0, + 0, 0, STRESS_NONE, DURATION_SINGLE)); + + /* load pattern to ODPG */ + ddr3_tip_load_pattern_to_odpg(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, PATTERN_TEST, + pattern_table[PATTERN_TEST]. + start_addr); + + /* + * Phase 2: ODPG to Read Leveling mode + */ + + /* General Training Opcode register */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_WRITE_READ_MODE_ENABLE_REG, 0, + MASK_ALL_BITS)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_TRAINING_CONTROL_REG, 0x301b01, 0x3c3fef)); + + /* Object1 opcode register 0 & 1 */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + speed_bin_index = + tm->interface_params[if_id].speed_bin_index; + cl_val = + cas_latency_table[speed_bin_index].cl_val[freq]; + data = (cl_val << 17) | (0x3 << 25); + mask = (0xff << 9) | (0x1f << 17) | (0x3 << 25); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ODPG_OBJ1_OPCODE_REG, data, mask)); + } + + /* Set iteration count to max value */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_OPCODE_1_REG, 0xd00, 0xd00)); + + /* + * Phase 2: Mask config + */ + + ddr3_tip_dynamic_per_bit_read_leveling_seq(dev_num); + + /* + * Phase 3: Read Leveling execution + */ + + /* temporary jira dunit=14751 */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_DBG_1_REG, 0, (u32)(1 << 31))); + /* configure phy reset value */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_DBG_3_REG, (0x7f << 24), + (u32)(0xff << 24))); + /* data pup rd reset enable */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + SDRAM_CONFIGURATION_REG, 0, (1 << 30))); + /* data pup rd reset disable */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + SDRAM_CONFIGURATION_REG, (1 << 30), (1 << 30))); + /* training SW override & training RL mode */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x1, 0x9)); + /* training enable */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_REG, (1 << 24) | (1 << 20), + (1 << 24) | (1 << 20))); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_REG, (u32)(1 << 31), (u32)(1 << 31))); + + /********* trigger training *******************/ + /* Trigger, poll on status and disable ODPG */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_TRAINING_TRIGGER_REG, 0x1, 0x1)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_TRAINING_STATUS_REG, 0x1, 0x1)); + + /*check for training done + results pass */ + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x2, 0x2, + ODPG_TRAINING_STATUS_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_LEVELING(DEBUG_LEVEL_ERROR, + ("Training Done Failed\n")); + return MV_FAIL; + } + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, + if_id, + ODPG_TRAINING_TRIGGER_REG, data_read, + 0x4)); + data = data_read[if_id]; + if (data != 0x0) { + DEBUG_LEVELING(DEBUG_LEVEL_ERROR, + ("Training Result Failed\n")); + } + } + + /*disable ODPG - Back to functional mode */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_ENABLE_REG, 0x1 << ODPG_DISABLE_OFFS, + (0x1 << ODPG_DISABLE_OFFS))); + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x0, 0x1, + ODPG_ENABLE_REG, MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_LEVELING(DEBUG_LEVEL_ERROR, + ("ODPG disable failed ")); + return MV_FAIL; + } + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_DATA_CONTROL_REG, 0, MASK_ALL_BITS)); + + /* double loop on bus, pup */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + /* check training done */ + for (bus_num = 0; + bus_num < tm->num_of_bus_per_interface; + bus_num++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_num); + + if (per_bit_rl_pup_status[if_id][bus_num] + == 0) { + curr_min_delay = 0; + for (bit_num = 0; bit_num < 8; + bit_num++) { + if (ddr3_tip_if_polling + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, (1 << 25), + (1 << 25), + mask_results_dq_reg_map + [bus_num * 8 + bit_num], + MAX_POLLING_ITERATIONS) != + MV_OK) { + DEBUG_LEVELING + (DEBUG_LEVEL_ERROR, + ("\n_r_l: DDR3 poll failed(2) for bus %d bit %d\n", + bus_num, + bit_num)); + } else { + /* read result per pup */ + CHECK_STATUS + (ddr3_tip_if_read + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + mask_results_dq_reg_map + [bus_num * 8 + + bit_num], + data_read, + MASK_ALL_BITS)); + data = + (data_read + [if_id] & + 0x1f) | + ((data_read + [if_id] & + 0xe0) << 1); + if (curr_min_delay == 0) + curr_min_delay = + data; + else if (data < + curr_min_delay) + curr_min_delay = + data; + if (data > data2_write[if_id][bus_num]) + data2_write + [if_id] + [bus_num] = + data; + } + } + + if (data2_write[if_id][bus_num] <= + (curr_min_delay + + MAX_DQ_READ_LEVELING_DELAY)) { + per_bit_rl_pup_status[if_id] + [bus_num] = 1; + } + } + } + } + + /* check if there is need to search new phyreg3 value */ + if (curr_numb < 2) { + /* if there is DLL that is not checked yet */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; + if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_num = 0; + bus_num < tm->num_of_bus_per_interface; + bus_num++) { + VALIDATE_ACTIVE(tm->bus_act_mask, + bus_num); + if (per_bit_rl_pup_status[if_id] + [bus_num] != 1) { + /* go to next ADLL value */ + CHECK_STATUS + (ddr3_tip_bus_write + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, + bus_num, DDR_PHY_DATA, + READ_CENTRALIZATION_PHY_REG, + (phyreg3_arr[if_id] + [bus_num] + + adll_array[curr_numb]))); + break_loop = 1; + break; + } + } + if (break_loop) + break; + } + } /* if (curr_numb < 2) */ + if (!break_loop) + break; + } /* for ( curr_numb = 0; curr_numb <3; curr_numb++) */ + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_num = 0; bus_num < tm->num_of_bus_per_interface; + bus_num++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_num); + if (per_bit_rl_pup_status[if_id][bus_num] == 1) + ddr3_tip_bus_write(dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, + bus_num, DDR_PHY_DATA, + RL_PHY_REG + + CS_REG_VALUE(effective_cs), + data2_write[if_id] + [bus_num]); + else + is_any_pup_fail = 1; + } + + /* TBD flow does not support multi CS */ + /* + * cs_bitmask = tm->interface_params[if_id]. + * as_bus_params[bus_num].cs_bitmask; + */ + /* divide by 4 is used for retrieving the CS number */ + /* + * TBD BC2 - what is the PHY address for other + * CS ddr3_tip_write_cs_result() ??? + */ + /* + * find what should be written to PHY + * - max delay that is less than threshold + */ + if (is_any_pup_fail == 1) { + training_result[training_stage][if_id] = TEST_FAILED; + if (debug_mode == 0) + return MV_FAIL; + } + } + DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("RL exit read leveling\n")); + + /* + * Phase 3: Exit Read Leveling + */ + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, (1 << 3), (1 << 3))); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_SW_1_REG, (1 << 16), (1 << 16))); + /* set ODPG to functional */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_DATA_CONTROL_REG, 0x0, MASK_ALL_BITS)); + /* + * Copy the result from the effective CS search to the real + * Functional CS + */ + ddr3_tip_write_cs_result(dev_num, RL_PHY_REG); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_DATA_CONTROL_REG, 0x0, MASK_ALL_BITS)); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + /* restore cs enable value */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + CS_ENABLE_REG, cs_enable_reg_val[if_id], + MASK_ALL_BITS)); + if (odt_config != 0) { + CHECK_STATUS(ddr3_tip_write_additional_odt_setting + (dev_num, if_id)); + } + } + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + if (training_result[training_stage][if_id] == TEST_FAILED) + return MV_FAIL; + } + + return MV_OK; +} + +int ddr3_tip_calc_cs_mask(u32 dev_num, u32 if_id, u32 effective_cs, + u32 *cs_mask) +{ + u32 all_bus_cs = 0, same_bus_cs; + u32 bus_cnt; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + *cs_mask = same_bus_cs = CS_BIT_MASK; + + /* + * In some of the devices (such as BC2), the CS is per pup and there + * for mixed mode is valid on like other devices where CS configuration + * is per interface. + * In order to know that, we do 'Or' and 'And' operation between all + * CS (of the pups). + * If they are they are not the same then it's mixed mode so all CS + * should be configured (when configuring the MRS) + */ + for (bus_cnt = 0; bus_cnt < tm->num_of_bus_per_interface; bus_cnt++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_cnt); + + all_bus_cs |= tm->interface_params[if_id]. + as_bus_params[bus_cnt].cs_bitmask; + same_bus_cs &= tm->interface_params[if_id]. + as_bus_params[bus_cnt].cs_bitmask; + + /* cs enable is active low */ + *cs_mask &= ~tm->interface_params[if_id]. + as_bus_params[bus_cnt].cs_bitmask; + } + + if (all_bus_cs == same_bus_cs) + *cs_mask = (*cs_mask | (~(1 << effective_cs))) & CS_BIT_MASK; + + return MV_OK; +} + +/* + * Dynamic write leveling + */ +int ddr3_tip_dynamic_write_leveling(u32 dev_num) +{ + u32 reg_data = 0, iter, if_id, bus_cnt; + u32 cs_enable_reg_val[MAX_INTERFACE_NUM] = { 0 }; + u32 cs_mask[MAX_INTERFACE_NUM]; + u32 read_data_sample_delay_vals[MAX_INTERFACE_NUM] = { 0 }; + u32 read_data_ready_delay_vals[MAX_INTERFACE_NUM] = { 0 }; + /* 0 for failure */ + u32 res_values[MAX_INTERFACE_NUM * MAX_BUS_NUM] = { 0 }; + u32 test_res = 0; /* 0 - success for all pup */ + u32 data_read[MAX_INTERFACE_NUM]; + u8 wl_values[NUM_OF_CS][MAX_BUS_NUM][MAX_INTERFACE_NUM]; + u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map(); + u32 cs_mask0[MAX_INTERFACE_NUM] = { 0 }; + u32 max_cs = hws_ddr3_tip_max_cs_get(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + + training_result[training_stage][if_id] = TEST_SUCCESS; + + /* save Read Data Sample Delay */ + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, + READ_DATA_SAMPLE_DELAY, + read_data_sample_delay_vals, MASK_ALL_BITS)); + /* save Read Data Ready Delay */ + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, + READ_DATA_READY_DELAY, read_data_ready_delay_vals, + MASK_ALL_BITS)); + /* save current cs reg val */ + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, + CS_ENABLE_REG, cs_enable_reg_val, MASK_ALL_BITS)); + } + + /* + * Phase 1: DRAM 2 Write Leveling mode + */ + + /*Assert 10 refresh commands to DRAM to all CS */ + for (iter = 0; iter < WL_ITERATION_NUM; iter++) { + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, SDRAM_OPERATION_REG, + (u32)((~(0xf) << 8) | 0x2), 0xf1f)); + } + } + /* check controller back to normal */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_UNICAST, if_id, 0, 0x1f, + SDRAM_OPERATION_REG, MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_LEVELING(DEBUG_LEVEL_ERROR, + ("WL: DDR3 poll failed(3)")); + } + } + + for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { + /*enable write leveling to all cs - Q off , WL n */ + /* calculate interface cs mask */ + CHECK_STATUS(ddr3_tip_write_mrs_cmd(dev_num, cs_mask0, MRS1_CMD, + 0x1000, 0x1080)); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + /* cs enable is active low */ + ddr3_tip_calc_cs_mask(dev_num, if_id, effective_cs, + &cs_mask[if_id]); + } + + /* Enable Output buffer to relevant CS - Q on , WL on */ + CHECK_STATUS(ddr3_tip_write_mrs_cmd + (dev_num, cs_mask, MRS1_CMD, 0x80, 0x1080)); + + /*enable odt for relevant CS */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + 0x1498, (0x3 << (effective_cs * 2)), 0xf)); + + /* + * Phase 2: Set training IP to write leveling mode + */ + + CHECK_STATUS(ddr3_tip_dynamic_write_leveling_seq(dev_num)); + + /* + * Phase 3: Trigger training + */ + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_TRAINING_TRIGGER_REG, 0x1, 0x1)); + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + + /* training done */ + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_UNICAST, if_id, + (1 << 1), (1 << 1), ODPG_TRAINING_STATUS_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_LEVELING( + DEBUG_LEVEL_ERROR, + ("WL: DDR3 poll (4) failed (Data: 0x%x)\n", + reg_data)); + } +#if !defined(CONFIG_ARMADA_38X) /*Disabled. JIRA #1498 */ + else { + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, + if_id, + ODPG_TRAINING_TRIGGER_REG, + ®_data, (1 << 2))); + if (reg_data != 0) { + DEBUG_LEVELING( + DEBUG_LEVEL_ERROR, + ("WL: WL failed IF %d reg_data=0x%x\n", + if_id, reg_data)); + } + } +#endif + } + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + /* training done */ + if (ddr3_tip_if_polling + (dev_num, ACCESS_TYPE_UNICAST, if_id, + (1 << 1), (1 << 1), ODPG_TRAINING_STATUS_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_LEVELING( + DEBUG_LEVEL_ERROR, + ("WL: DDR3 poll (4) failed (Data: 0x%x)\n", + reg_data)); + } else { +#if !defined(CONFIG_ARMADA_38X) /*Disabled. JIRA #1498 */ + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, + if_id, + ODPG_TRAINING_STATUS_REG, + data_read, (1 << 2))); + reg_data = data_read[if_id]; + if (reg_data != 0) { + DEBUG_LEVELING( + DEBUG_LEVEL_ERROR, + ("WL: WL failed IF %d reg_data=0x%x\n", + if_id, reg_data)); + } +#endif + + /* check for training completion per bus */ + for (bus_cnt = 0; + bus_cnt < tm->num_of_bus_per_interface; + bus_cnt++) { + VALIDATE_ACTIVE(tm->bus_act_mask, + bus_cnt); + /* training status */ + CHECK_STATUS(ddr3_tip_if_read + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + mask_results_pup_reg_map + [bus_cnt], data_read, + (1 << 25))); + reg_data = data_read[if_id]; + DEBUG_LEVELING( + DEBUG_LEVEL_TRACE, + ("WL: IF %d BUS %d reg 0x%x\n", + if_id, bus_cnt, reg_data)); + if (reg_data == 0) { + res_values[ + (if_id * + tm->num_of_bus_per_interface) + + bus_cnt] = 1; + } + CHECK_STATUS(ddr3_tip_if_read + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + mask_results_pup_reg_map + [bus_cnt], data_read, + 0xff)); + /* + * Save the read value that should be + * write to PHY register + */ + wl_values[effective_cs] + [bus_cnt][if_id] = + (u8)data_read[if_id]; + } + } + } + + /* + * Phase 4: Exit write leveling mode + */ + + /* disable DQs toggling */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + WR_LEVELING_DQS_PATTERN_REG, 0x0, 0x1)); + + /* Update MRS 1 (WL off) */ + CHECK_STATUS(ddr3_tip_write_mrs_cmd(dev_num, cs_mask0, MRS1_CMD, + 0x1000, 0x1080)); + + /* Update MRS 1 (return to functional mode - Q on , WL off) */ + CHECK_STATUS(ddr3_tip_write_mrs_cmd + (dev_num, cs_mask0, MRS1_CMD, 0x0, 0x1080)); + + /* set phy to normal mode */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x5, 0x7)); + + /* exit sw override mode */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x4, 0x7)); + } + + /* + * Phase 5: Load WL values to each PHY + */ + + for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + test_res = 0; + for (bus_cnt = 0; + bus_cnt < tm->num_of_bus_per_interface; + bus_cnt++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_cnt); + /* check if result == pass */ + if (res_values + [(if_id * + tm->num_of_bus_per_interface) + + bus_cnt] == 0) { + /* + * read result control register + * according to pup + */ + reg_data = + wl_values[effective_cs][bus_cnt] + [if_id]; + /* + * Write into write leveling register + * ([4:0] ADLL, [8:6] Phase, [15:10] + * (centralization) ADLL + 0x10) + */ + reg_data = + (reg_data & 0x1f) | + (((reg_data & 0xe0) >> 5) << 6) | + (((reg_data & 0x1f) + + phy_reg1_val) << 10); + ddr3_tip_bus_write( + dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, + bus_cnt, + DDR_PHY_DATA, + WL_PHY_REG + + effective_cs * + CS_REGISTER_ADDR_OFFSET, + reg_data); + } else { + test_res = 1; + /* + * read result control register + * according to pup + */ + CHECK_STATUS(ddr3_tip_if_read + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + mask_results_pup_reg_map + [bus_cnt], data_read, + 0xff)); + reg_data = data_read[if_id]; + DEBUG_LEVELING( + DEBUG_LEVEL_ERROR, + ("WL: IF %d BUS %d failed, reg 0x%x\n", + if_id, bus_cnt, reg_data)); + } + } + + if (test_res != 0) { + training_result[training_stage][if_id] = + TEST_FAILED; + } + } + } + /* Set to 0 after each loop to avoid illegal value may be used */ + effective_cs = 0; + + /* + * Copy the result from the effective CS search to the real + * Functional CS + */ + /* ddr3_tip_write_cs_result(dev_num, WL_PHY_REG); */ + /* restore saved values */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + /* restore Read Data Sample Delay */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + READ_DATA_SAMPLE_DELAY, + read_data_sample_delay_vals[if_id], + MASK_ALL_BITS)); + + /* restore Read Data Ready Delay */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + READ_DATA_READY_DELAY, + read_data_ready_delay_vals[if_id], + MASK_ALL_BITS)); + + /* enable multi cs */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + CS_ENABLE_REG, cs_enable_reg_val[if_id], + MASK_ALL_BITS)); + } + + /* Disable modt0 for CS0 training - need to adjust for multy CS */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x1498, + 0x0, 0xf)); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + if (training_result[training_stage][if_id] == TEST_FAILED) + return MV_FAIL; + } + + return MV_OK; +} + +/* + * Dynamic write leveling supplementary + */ +int ddr3_tip_dynamic_write_leveling_supp(u32 dev_num) +{ + int adll_offset; + u32 if_id, bus_id, data, data_tmp; + int is_if_fail = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + is_if_fail = 0; + + for (bus_id = 0; bus_id < GET_TOPOLOGY_NUM_OF_BUSES(); + bus_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + wr_supp_res[if_id][bus_id].is_pup_fail = 1; + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, ACCESS_TYPE_UNICAST, + bus_id, DDR_PHY_DATA, + WRITE_CENTRALIZATION_PHY_REG + + effective_cs * CS_REGISTER_ADDR_OFFSET, + &data)); + DEBUG_LEVELING( + DEBUG_LEVEL_TRACE, + ("WL Supp: adll_offset=0 data delay = %d\n", + data)); + if (ddr3_tip_wl_supp_align_phase_shift + (dev_num, if_id, bus_id, 0, 0) == MV_OK) { + DEBUG_LEVELING( + DEBUG_LEVEL_TRACE, + ("WL Supp: IF %d bus_id %d adll_offset=0 Success !\n", + if_id, bus_id)); + continue; + } + + /* change adll */ + adll_offset = 5; + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, bus_id, DDR_PHY_DATA, + WRITE_CENTRALIZATION_PHY_REG + + effective_cs * CS_REGISTER_ADDR_OFFSET, + data + adll_offset)); + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, ACCESS_TYPE_UNICAST, + bus_id, DDR_PHY_DATA, + WRITE_CENTRALIZATION_PHY_REG + + effective_cs * CS_REGISTER_ADDR_OFFSET, + &data_tmp)); + DEBUG_LEVELING( + DEBUG_LEVEL_TRACE, + ("WL Supp: adll_offset= %d data delay = %d\n", + adll_offset, data_tmp)); + + if (ddr3_tip_wl_supp_align_phase_shift + (dev_num, if_id, bus_id, adll_offset, 0) == MV_OK) { + DEBUG_LEVELING( + DEBUG_LEVEL_TRACE, + ("WL Supp: IF %d bus_id %d adll_offset= %d Success !\n", + if_id, bus_id, adll_offset)); + continue; + } + + /* change adll */ + adll_offset = -5; + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, bus_id, DDR_PHY_DATA, + WRITE_CENTRALIZATION_PHY_REG + + effective_cs * CS_REGISTER_ADDR_OFFSET, + data + adll_offset)); + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, ACCESS_TYPE_UNICAST, + bus_id, DDR_PHY_DATA, + WRITE_CENTRALIZATION_PHY_REG + + effective_cs * CS_REGISTER_ADDR_OFFSET, + &data_tmp)); + DEBUG_LEVELING( + DEBUG_LEVEL_TRACE, + ("WL Supp: adll_offset= %d data delay = %d\n", + adll_offset, data_tmp)); + if (ddr3_tip_wl_supp_align_phase_shift + (dev_num, if_id, bus_id, adll_offset, 0) == MV_OK) { + DEBUG_LEVELING( + DEBUG_LEVEL_TRACE, + ("WL Supp: IF %d bus_id %d adll_offset= %d Success !\n", + if_id, bus_id, adll_offset)); + continue; + } else { + DEBUG_LEVELING( + DEBUG_LEVEL_ERROR, + ("WL Supp: IF %d bus_id %d Failed !\n", + if_id, bus_id)); + is_if_fail = 1; + } + } + DEBUG_LEVELING(DEBUG_LEVEL_TRACE, + ("WL Supp: IF %d bus_id %d is_pup_fail %d\n", + if_id, bus_id, is_if_fail)); + + if (is_if_fail == 1) { + DEBUG_LEVELING(DEBUG_LEVEL_ERROR, + ("WL Supp: IF %d failed\n", if_id)); + training_result[training_stage][if_id] = TEST_FAILED; + } else { + training_result[training_stage][if_id] = TEST_SUCCESS; + } + } + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + if (training_result[training_stage][if_id] == TEST_FAILED) + return MV_FAIL; + } + + return MV_OK; +} + +/* + * Phase Shift + */ +static int ddr3_tip_wl_supp_align_phase_shift(u32 dev_num, u32 if_id, + u32 bus_id, u32 offset, + u32 bus_id_delta) +{ + wr_supp_res[if_id][bus_id].stage = PHASE_SHIFT; + if (ddr3_tip_xsb_compare_test(dev_num, if_id, bus_id, + 0, bus_id_delta) == MV_OK) { + wr_supp_res[if_id][bus_id].is_pup_fail = 0; + return MV_OK; + } else if (ddr3_tip_xsb_compare_test(dev_num, if_id, bus_id, + ONE_CLOCK_ERROR_SHIFT, + bus_id_delta) == MV_OK) { + /* 1 clock error */ + wr_supp_res[if_id][bus_id].stage = CLOCK_SHIFT; + DEBUG_LEVELING(DEBUG_LEVEL_TRACE, + ("Supp: 1 error clock for if %d pup %d with ofsset %d success\n", + if_id, bus_id, offset)); + ddr3_tip_wl_supp_one_clk_err_shift(dev_num, if_id, bus_id, 0); + wr_supp_res[if_id][bus_id].is_pup_fail = 0; + return MV_OK; + } else if (ddr3_tip_xsb_compare_test(dev_num, if_id, bus_id, + ALIGN_ERROR_SHIFT, + bus_id_delta) == MV_OK) { + /* align error */ + DEBUG_LEVELING(DEBUG_LEVEL_TRACE, + ("Supp: align error for if %d pup %d with ofsset %d success\n", + if_id, bus_id, offset)); + wr_supp_res[if_id][bus_id].stage = ALIGN_SHIFT; + ddr3_tip_wl_supp_align_err_shift(dev_num, if_id, bus_id, 0); + wr_supp_res[if_id][bus_id].is_pup_fail = 0; + return MV_OK; + } else { + wr_supp_res[if_id][bus_id].is_pup_fail = 1; + return MV_FAIL; + } +} + +/* + * Compare Test + */ +static int ddr3_tip_xsb_compare_test(u32 dev_num, u32 if_id, u32 bus_id, + u32 edge_offset, u32 bus_id_delta) +{ + u32 num_of_succ_byte_compare, word_in_pattern, abs_offset; + u32 word_offset, i; + u32 read_pattern[TEST_PATTERN_LENGTH * 2]; + struct pattern_info *pattern_table = ddr3_tip_get_pattern_table(); + u32 pattern_test_pattern_table[8]; + + for (i = 0; i < 8; i++) { + pattern_test_pattern_table[i] = + pattern_table_get_word(dev_num, PATTERN_TEST, (u8)i); + } + + /* extern write, than read and compare */ + CHECK_STATUS(ddr3_tip_ext_write + (dev_num, if_id, + (pattern_table[PATTERN_TEST].start_addr + + ((SDRAM_CS_SIZE + 1) * effective_cs)), 1, + pattern_test_pattern_table)); + + CHECK_STATUS(ddr3_tip_reset_fifo_ptr(dev_num)); + + CHECK_STATUS(ddr3_tip_ext_read + (dev_num, if_id, + (pattern_table[PATTERN_TEST].start_addr + + ((SDRAM_CS_SIZE + 1) * effective_cs)), 1, read_pattern)); + + DEBUG_LEVELING( + DEBUG_LEVEL_TRACE, + ("XSB-compt: IF %d bus_id %d 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", + if_id, bus_id, read_pattern[0], read_pattern[1], + read_pattern[2], read_pattern[3], read_pattern[4], + read_pattern[5], read_pattern[6], read_pattern[7])); + + /* compare byte per pup */ + num_of_succ_byte_compare = 0; + for (word_in_pattern = start_xsb_offset; + word_in_pattern < (TEST_PATTERN_LENGTH * 2); word_in_pattern++) { + word_offset = word_in_pattern + edge_offset; + if ((word_offset > (TEST_PATTERN_LENGTH * 2 - 1)) || + (word_offset < 0)) + continue; + + if ((read_pattern[word_in_pattern] & pup_mask_table[bus_id]) == + (pattern_test_pattern_table[word_offset] & + pup_mask_table[bus_id])) + num_of_succ_byte_compare++; + } + + abs_offset = (edge_offset > 0) ? edge_offset : -edge_offset; + if (num_of_succ_byte_compare == ((TEST_PATTERN_LENGTH * 2) - + abs_offset - start_xsb_offset)) { + DEBUG_LEVELING( + DEBUG_LEVEL_TRACE, + ("XSB-compt: IF %d bus_id %d num_of_succ_byte_compare %d - Success\n", + if_id, bus_id, num_of_succ_byte_compare)); + return MV_OK; + } else { + DEBUG_LEVELING( + DEBUG_LEVEL_TRACE, + ("XSB-compt: IF %d bus_id %d num_of_succ_byte_compare %d - Fail !\n", + if_id, bus_id, num_of_succ_byte_compare)); + + DEBUG_LEVELING( + DEBUG_LEVEL_TRACE, + ("XSB-compt: expected 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", + pattern_test_pattern_table[0], + pattern_test_pattern_table[1], + pattern_test_pattern_table[2], + pattern_test_pattern_table[3], + pattern_test_pattern_table[4], + pattern_test_pattern_table[5], + pattern_test_pattern_table[6], + pattern_test_pattern_table[7])); + DEBUG_LEVELING( + DEBUG_LEVEL_TRACE, + ("XSB-compt: recieved 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", + read_pattern[0], read_pattern[1], + read_pattern[2], read_pattern[3], + read_pattern[4], read_pattern[5], + read_pattern[6], read_pattern[7])); + + DEBUG_LEVELING( + DEBUG_LEVEL_TRACE, + ("XSB-compt: IF %d bus_id %d num_of_succ_byte_compare %d - Fail !\n", + if_id, bus_id, num_of_succ_byte_compare)); + + return MV_FAIL; + } +} + +/* + * Clock error shift - function moves the write leveling delay 1cc forward + */ +static int ddr3_tip_wl_supp_one_clk_err_shift(u32 dev_num, u32 if_id, + u32 bus_id, u32 bus_id_delta) +{ + int phase, adll; + u32 data; + DEBUG_LEVELING(DEBUG_LEVEL_TRACE, ("One_clk_err_shift\n")); + + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, ACCESS_TYPE_UNICAST, bus_id, + DDR_PHY_DATA, WL_PHY_REG, &data)); + phase = ((data >> 6) & 0x7); + adll = data & 0x1f; + DEBUG_LEVELING(DEBUG_LEVEL_TRACE, + ("One_clk_err_shift: IF %d bus_id %d phase %d adll %d\n", + if_id, bus_id, phase, adll)); + + if ((phase == 0) || (phase == 1)) { + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, bus_id, + DDR_PHY_DATA, 0, (phase + 2), 0x1f)); + } else if (phase == 2) { + if (adll < 6) { + data = (3 << 6) + (0x1f); + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + bus_id, DDR_PHY_DATA, 0, data, + (0x7 << 6 | 0x1f))); + data = 0x2f; + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + bus_id, DDR_PHY_DATA, 1, data, 0x3f)); + } + } else { + /* phase 3 */ + return MV_FAIL; + } + + return MV_OK; +} + +/* + * Align error shift + */ +static int ddr3_tip_wl_supp_align_err_shift(u32 dev_num, u32 if_id, + u32 bus_id, u32 bus_id_delta) +{ + int phase, adll; + u32 data; + + /* Shift WL result 1 phase back */ + CHECK_STATUS(ddr3_tip_bus_read(dev_num, if_id, ACCESS_TYPE_UNICAST, + bus_id, DDR_PHY_DATA, WL_PHY_REG, + &data)); + phase = ((data >> 6) & 0x7); + adll = data & 0x1f; + DEBUG_LEVELING( + DEBUG_LEVEL_TRACE, + ("Wl_supp_align_err_shift: IF %d bus_id %d phase %d adll %d\n", + if_id, bus_id, phase, adll)); + + if (phase < 2) { + if (adll > 0x1a) { + if (phase == 0) + return MV_FAIL; + + if (phase == 1) { + data = 0; + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, bus_id, DDR_PHY_DATA, + 0, data, (0x7 << 6 | 0x1f))); + data = 0xf; + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, bus_id, DDR_PHY_DATA, + 1, data, 0x1f)); + return MV_OK; + } + } else { + return MV_FAIL; + } + } else if ((phase == 2) || (phase == 3)) { + phase = phase - 2; + data = (phase << 6) + (adll & 0x1f); + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, bus_id, + DDR_PHY_DATA, 0, data, (0x7 << 6 | 0x1f))); + return MV_OK; + } else { + DEBUG_LEVELING(DEBUG_LEVEL_ERROR, + ("Wl_supp_align_err_shift: unexpected phase\n")); + + return MV_FAIL; + } + + return MV_OK; +} + +/* + * Dynamic write leveling sequence + */ +static int ddr3_tip_dynamic_write_leveling_seq(u32 dev_num) +{ + u32 bus_id, dq_id; + u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map(); + u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x1, 0x5)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_WRITE_LEVELING_REG, 0x50, 0xff)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_WRITE_LEVELING_REG, 0x5c, 0xff)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_TRAINING_CONTROL_REG, 0x381b82, 0x3c3faf)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_OBJ1_OPCODE_REG, (0x3 << 25), (0x3ffff << 9))); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_OBJ1_ITER_CNT_REG, 0x80, 0xffff)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_WRITE_LEVELING_DONE_CNTR_REG, 0x14, 0xff)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + TRAINING_WRITE_LEVELING_REG, 0xff5c, 0xffff)); + + /* mask PBS */ + for (dq_id = 0; dq_id < MAX_DQ_NUM; dq_id++) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + mask_results_dq_reg_map[dq_id], 0x1 << 24, + 0x1 << 24)); + } + + /* Mask all results */ + for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + mask_results_pup_reg_map[bus_id], 0x1 << 24, + 0x1 << 24)); + } + + /* Unmask only wanted */ + for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + mask_results_pup_reg_map[bus_id], 0, 0x1 << 24)); + } + + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + WR_LEVELING_DQS_PATTERN_REG, 0x1, 0x1)); + + return MV_OK; +} + +/* + * Dynamic read leveling sequence + */ +static int ddr3_tip_dynamic_read_leveling_seq(u32 dev_num) +{ + u32 bus_id, dq_id; + u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map(); + u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* mask PBS */ + for (dq_id = 0; dq_id < MAX_DQ_NUM; dq_id++) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + mask_results_dq_reg_map[dq_id], 0x1 << 24, + 0x1 << 24)); + } + + /* Mask all results */ + for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + mask_results_pup_reg_map[bus_id], 0x1 << 24, + 0x1 << 24)); + } + + /* Unmask only wanted */ + for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + mask_results_pup_reg_map[bus_id], 0, 0x1 << 24)); + } + + return MV_OK; +} + +/* + * Dynamic read leveling sequence + */ +static int ddr3_tip_dynamic_per_bit_read_leveling_seq(u32 dev_num) +{ + u32 bus_id, dq_id; + u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map(); + u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* mask PBS */ + for (dq_id = 0; dq_id < MAX_DQ_NUM; dq_id++) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + mask_results_dq_reg_map[dq_id], 0x1 << 24, + 0x1 << 24)); + } + + /* Mask all results */ + for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + mask_results_pup_reg_map[bus_id], 0x1 << 24, + 0x1 << 24)); + } + + /* Unmask only wanted */ + for (dq_id = 0; dq_id < MAX_DQ_NUM; dq_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, dq_id / 8); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + mask_results_dq_reg_map[dq_id], 0x0 << 24, + 0x1 << 24)); + } + + return MV_OK; +} + +/* + * Print write leveling supplementary results + */ +int ddr3_tip_print_wl_supp_result(u32 dev_num) +{ + u32 bus_id = 0, if_id = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + DEBUG_LEVELING(DEBUG_LEVEL_INFO, + ("I/F0 PUP0 Result[0 - success, 1-fail] ...\n")); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; + bus_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + DEBUG_LEVELING(DEBUG_LEVEL_INFO, + ("%d ,", wr_supp_res[if_id] + [bus_id].is_pup_fail)); + } + } + DEBUG_LEVELING( + DEBUG_LEVEL_INFO, + ("I/F0 PUP0 Stage[0-phase_shift, 1-clock_shift, 2-align_shift] ...\n")); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; + bus_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); + DEBUG_LEVELING(DEBUG_LEVEL_INFO, + ("%d ,", wr_supp_res[if_id] + [bus_id].stage)); + } + } + + return MV_OK; +} diff --git a/drivers/ddr/marvell/a38x/ddr3_training_leveling.h b/drivers/ddr/marvell/a38x/ddr3_training_leveling.h new file mode 100644 index 0000000..f2b4177 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_leveling.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR3_TRAINING_LEVELING_H_ +#define _DDR3_TRAINING_LEVELING_H_ + +#define MAX_DQ_READ_LEVELING_DELAY 15 + +int ddr3_tip_print_wl_supp_result(u32 dev_num); +int ddr3_tip_calc_cs_mask(u32 dev_num, u32 if_id, u32 effective_cs, + u32 *cs_mask); +u32 hws_ddr3_tip_max_cs_get(void); + +#endif /* _DDR3_TRAINING_LEVELING_H_ */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_pbs.c b/drivers/ddr/marvell/a38x/ddr3_training_pbs.c new file mode 100644 index 0000000..2b4a58f --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_pbs.c @@ -0,0 +1,995 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +#define TYPICAL_PBS_VALUE 12 + +u32 nominal_adll[MAX_INTERFACE_NUM * MAX_BUS_NUM]; +enum hws_training_ip_stat train_status[MAX_INTERFACE_NUM]; +u8 result_mat[MAX_INTERFACE_NUM][MAX_BUS_NUM][BUS_WIDTH_IN_BITS]; +u8 result_mat_rx_dqs[MAX_INTERFACE_NUM][MAX_BUS_NUM][MAX_CS_NUM]; +/* 4-EEWA, 3-EWA, 2-SWA, 1-Fail, 0-Pass */ +u8 result_all_bit[MAX_BUS_NUM * BUS_WIDTH_IN_BITS * MAX_INTERFACE_NUM]; +u8 max_pbs_per_pup[MAX_INTERFACE_NUM][MAX_BUS_NUM]; +u8 min_pbs_per_pup[MAX_INTERFACE_NUM][MAX_BUS_NUM]; +u8 max_adll_per_pup[MAX_INTERFACE_NUM][MAX_BUS_NUM]; +u8 min_adll_per_pup[MAX_INTERFACE_NUM][MAX_BUS_NUM]; +u32 pbsdelay_per_pup[NUM_OF_PBS_MODES][MAX_INTERFACE_NUM][MAX_BUS_NUM]; +u8 adll_shift_lock[MAX_INTERFACE_NUM][MAX_BUS_NUM]; +u8 adll_shift_val[MAX_INTERFACE_NUM][MAX_BUS_NUM]; +enum hws_pattern pbs_pattern = PATTERN_VREF; +static u8 pup_state[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + +/* + * Name: ddr3_tip_pbs + * Desc: PBS + * Args: TBD + * Notes: + * Returns: OK if success, other error code if fail. + */ +int ddr3_tip_pbs(u32 dev_num, enum pbs_dir pbs_mode) +{ + u32 res0[MAX_INTERFACE_NUM]; + int adll_tap = MEGA / freq_val[medium_freq] / 64; + int pad_num = 0; + enum hws_search_dir search_dir = + (pbs_mode == PBS_RX_MODE) ? HWS_HIGH2LOW : HWS_LOW2HIGH; + enum hws_dir dir = (pbs_mode == PBS_RX_MODE) ? OPER_READ : OPER_WRITE; + int iterations = (pbs_mode == PBS_RX_MODE) ? 31 : 63; + u32 res_valid_mask = (pbs_mode == PBS_RX_MODE) ? 0x1f : 0x3f; + int init_val = (search_dir == HWS_LOW2HIGH) ? 0 : iterations; + enum hws_edge_compare search_edge = EDGE_FP; + u32 pup = 0, bit = 0, if_id = 0, all_lock = 0, cs_num = 0; + int reg_addr = 0; + u32 validation_val = 0; + u32 cs_enable_reg_val[MAX_INTERFACE_NUM]; + u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg(); + u8 temp = 0; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* save current cs enable reg val */ + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + + /* save current cs enable reg val */ + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_UNICAST, if_id, + CS_ENABLE_REG, cs_enable_reg_val, MASK_ALL_BITS)); + + /* enable single cs */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + CS_ENABLE_REG, (1 << 3), (1 << 3))); + } + + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (READ_CENTRALIZATION_PHY_REG + + (effective_cs * CS_REGISTER_ADDR_OFFSET)) : + (WRITE_CENTRALIZATION_PHY_REG + + (effective_cs * CS_REGISTER_ADDR_OFFSET)); + read_adll_value(nominal_adll, reg_addr, MASK_ALL_BITS); + + /* stage 1 shift ADLL */ + ddr3_tip_ip_training(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, RESULT_PER_BIT, + HWS_CONTROL_ELEMENT_ADLL, search_dir, dir, + tm->if_act_mask, init_val, iterations, + pbs_pattern, search_edge, CS_SINGLE, cs_num, + train_status); + validation_val = (pbs_mode == PBS_RX_MODE) ? 0x1f : 0; + for (pup = 0; pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + min_adll_per_pup[if_id][pup] = + (pbs_mode == PBS_RX_MODE) ? 0x1f : 0x3f; + pup_state[if_id][pup] = 0x3; + adll_shift_lock[if_id][pup] = 1; + max_adll_per_pup[if_id][pup] = 0x0; + } + } + + /* EBA */ + for (pup = 0; pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + for (bit = 0; bit < BUS_WIDTH_IN_BITS; bit++) { + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, + mask_results_dq_reg_map[ + bit + pup * BUS_WIDTH_IN_BITS], + res0, MASK_ALL_BITS)); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; + if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + DEBUG_PBS_ENGINE(DEBUG_LEVEL_TRACE, + ("FP I/F %d, bit:%d, pup:%d res0 0x%x\n", + if_id, bit, pup, + res0[if_id])); + if (pup_state[if_id][pup] != 3) + continue; + /* if not EBA state than move to next pup */ + + if ((res0[if_id] & 0x2000000) == 0) { + DEBUG_PBS_ENGINE(DEBUG_LEVEL_TRACE, + ("-- Fail Training IP\n")); + /* training machine failed */ + pup_state[if_id][pup] = 1; + adll_shift_lock[if_id][pup] = 0; + continue; + } + + else if ((res0[if_id] & res_valid_mask) == + validation_val) { + DEBUG_PBS_ENGINE(DEBUG_LEVEL_TRACE, + ("-- FAIL EBA %d %d %d %d\n", + if_id, bit, pup, + res0[if_id])); + pup_state[if_id][pup] = 4; + /* this pup move to EEBA */ + adll_shift_lock[if_id][pup] = 0; + continue; + } else { + /* + * The search ended in Pass we need + * Fail + */ + res0[if_id] = + (pbs_mode == PBS_RX_MODE) ? + ((res0[if_id] & + res_valid_mask) + 1) : + ((res0[if_id] & + res_valid_mask) - 1); + max_adll_per_pup[if_id][pup] = + (max_adll_per_pup[if_id][pup] < + res0[if_id]) ? + (u8)res0[if_id] : + max_adll_per_pup[if_id][pup]; + min_adll_per_pup[if_id][pup] = + (res0[if_id] > + min_adll_per_pup[if_id][pup]) ? + min_adll_per_pup[if_id][pup] : + (u8) + res0[if_id]; + /* + * vs the Rx we are searching for the + * smallest value of DQ shift so all + * Bus would fail + */ + adll_shift_val[if_id][pup] = + (pbs_mode == PBS_RX_MODE) ? + max_adll_per_pup[if_id][pup] : + min_adll_per_pup[if_id][pup]; + } + } + } + } + + /* EEBA */ + for (pup = 0; pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + + if (pup_state[if_id][pup] != 4) + continue; + /* + * if pup state different from EEBA than move to + * next pup + */ + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (0x54 + effective_cs * 0x10) : + (0x14 + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, pup, DDR_PHY_DATA, + reg_addr, 0x1f)); + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (0x55 + effective_cs * 0x10) : + (0x15 + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, pup, DDR_PHY_DATA, + reg_addr, 0x1f)); + /* initialize the Edge2 Max. */ + adll_shift_val[if_id][pup] = 0; + min_adll_per_pup[if_id][pup] = + (pbs_mode == PBS_RX_MODE) ? 0x1f : 0x3f; + max_adll_per_pup[if_id][pup] = 0x0; + + ddr3_tip_ip_training(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, RESULT_PER_BIT, + HWS_CONTROL_ELEMENT_ADLL, + search_dir, dir, + tm->if_act_mask, init_val, + iterations, pbs_pattern, + search_edge, CS_SINGLE, cs_num, + train_status); + DEBUG_PBS_ENGINE(DEBUG_LEVEL_INFO, + ("ADLL shift results:\n")); + + for (bit = 0; bit < BUS_WIDTH_IN_BITS; bit++) { + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, + mask_results_dq_reg_map[ + bit + pup * + BUS_WIDTH_IN_BITS], + res0, MASK_ALL_BITS)); + DEBUG_PBS_ENGINE(DEBUG_LEVEL_TRACE, + ("FP I/F %d, bit:%d, pup:%d res0 0x%x\n", + if_id, bit, pup, + res0[if_id])); + + if ((res0[if_id] & 0x2000000) == 0) { + DEBUG_PBS_ENGINE(DEBUG_LEVEL_TRACE, + (" -- EEBA Fail\n")); + bit = BUS_WIDTH_IN_BITS; + /* exit bit loop */ + DEBUG_PBS_ENGINE(DEBUG_LEVEL_TRACE, + ("-- EEBA Fail Training IP\n")); + /* + * training machine failed but pass + * before in the EBA so maybe the DQS + * shift change env. + */ + pup_state[if_id][pup] = 2; + adll_shift_lock[if_id][pup] = 0; + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (0x54 + effective_cs * 0x10) : + (0x14 + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + 0x0)); + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (0x55 + effective_cs * 0x10) : + (0x15 + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + 0x0)); + continue; + } else if ((res0[if_id] & res_valid_mask) == + validation_val) { + /* exit bit loop */ + bit = BUS_WIDTH_IN_BITS; + DEBUG_PBS_ENGINE(DEBUG_LEVEL_TRACE, + ("-- FAIL EEBA\n")); + /* this pup move to SBA */ + pup_state[if_id][pup] = 2; + adll_shift_lock[if_id][pup] = 0; + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (0x54 + effective_cs * 0x10) : + (0x14 + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + 0x0)); + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (0x55 + effective_cs * 0x10) : + (0x15 + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, + ACCESS_TYPE_UNICAST, + if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + 0x0)); + continue; + } else { + adll_shift_lock[if_id][pup] = 1; + /* + * The search ended in Pass we need + * Fail + */ + res0[if_id] = + (pbs_mode == PBS_RX_MODE) ? + ((res0[if_id] & + res_valid_mask) + 1) : + ((res0[if_id] & + res_valid_mask) - 1); + max_adll_per_pup[if_id][pup] = + (max_adll_per_pup[if_id][pup] < + res0[if_id]) ? + (u8)res0[if_id] : + max_adll_per_pup[if_id][pup]; + min_adll_per_pup[if_id][pup] = + (res0[if_id] > + min_adll_per_pup[if_id][pup]) ? + min_adll_per_pup[if_id][pup] : + (u8)res0[if_id]; + /* + * vs the Rx we are searching for the + * smallest value of DQ shift so all Bus + * would fail + */ + adll_shift_val[if_id][pup] = + (pbs_mode == PBS_RX_MODE) ? + max_adll_per_pup[if_id][pup] : + min_adll_per_pup[if_id][pup]; + } + } + } + } + + /* Print Stage result */ + for (pup = 0; pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + DEBUG_PBS_ENGINE(DEBUG_LEVEL_TRACE, + ("FP I/F %d, ADLL Shift for EBA: pup[%d] Lock status = %d Lock Val = %d,%d\n", + if_id, pup, + adll_shift_lock[if_id][pup], + max_adll_per_pup[if_id][pup], + min_adll_per_pup[if_id][pup])); + } + } + DEBUG_PBS_ENGINE(DEBUG_LEVEL_INFO, + ("Update ADLL Shift of all pups:\n")); + + for (pup = 0; pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + if (adll_shift_lock[if_id][pup] != 1) + continue; + /* if pup not locked continue to next pup */ + + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (0x3 + effective_cs * 4) : + (0x1 + effective_cs * 4); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, pup, DDR_PHY_DATA, + reg_addr, adll_shift_val[if_id][pup])); + DEBUG_PBS_ENGINE(DEBUG_LEVEL_TRACE, + ("FP I/F %d, Pup[%d] = %d\n", if_id, + pup, adll_shift_val[if_id][pup])); + } + } + + /* PBS EEBA&EBA */ + /* Start the Per Bit Skew search */ + for (pup = 0; pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + max_pbs_per_pup[if_id][pup] = 0x0; + min_pbs_per_pup[if_id][pup] = 0x1f; + for (bit = 0; bit < BUS_WIDTH_IN_BITS; bit++) { + /* reset result for PBS */ + result_all_bit[bit + pup * BUS_WIDTH_IN_BITS + + if_id * MAX_BUS_NUM * + BUS_WIDTH_IN_BITS] = 0; + } + } + } + + iterations = 31; + search_dir = HWS_LOW2HIGH; + /* !!!!! ran sh (search_dir == HWS_LOW2HIGH)?0:iterations; */ + init_val = 0; + + ddr3_tip_ip_training(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + RESULT_PER_BIT, HWS_CONTROL_ELEMENT_DQ_SKEW, + search_dir, dir, tm->if_act_mask, init_val, + iterations, pbs_pattern, search_edge, + CS_SINGLE, cs_num, train_status); + + for (pup = 0; pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + if (adll_shift_lock[if_id][pup] != 1) { + /* if pup not lock continue to next pup */ + continue; + } + + for (bit = 0; bit < BUS_WIDTH_IN_BITS; bit++) { + CHECK_STATUS(ddr3_tip_if_read + (dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, + mask_results_dq_reg_map[ + bit + + pup * BUS_WIDTH_IN_BITS], + res0, MASK_ALL_BITS)); + DEBUG_PBS_ENGINE(DEBUG_LEVEL_INFO, + ("Per Bit Skew search, FP I/F %d, bit:%d, pup:%d res0 0x%x\n", + if_id, bit, pup, + res0[if_id])); + if ((res0[if_id] & 0x2000000) == 0) { + DEBUG_PBS_ENGINE(DEBUG_LEVEL_INFO, + ("--EBA PBS Fail - Training IP machine\n")); + /* exit the bit loop */ + bit = BUS_WIDTH_IN_BITS; + /* + * ADLL is no long in lock need new + * search + */ + adll_shift_lock[if_id][pup] = 0; + /* Move to SBA */ + pup_state[if_id][pup] = 2; + max_pbs_per_pup[if_id][pup] = 0x0; + min_pbs_per_pup[if_id][pup] = 0x1f; + continue; + } else { + temp = (u8)(res0[if_id] & + res_valid_mask); + max_pbs_per_pup[if_id][pup] = + (temp > + max_pbs_per_pup[if_id][pup]) ? + temp : + max_pbs_per_pup[if_id][pup]; + min_pbs_per_pup[if_id][pup] = + (temp < + min_pbs_per_pup[if_id][pup]) ? + temp : + min_pbs_per_pup[if_id][pup]; + result_all_bit[bit + + pup * BUS_WIDTH_IN_BITS + + if_id * MAX_BUS_NUM * + BUS_WIDTH_IN_BITS] = + temp; + } + } + } + } + + /* Check all Pup lock */ + all_lock = 1; + for (pup = 0; pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + all_lock = all_lock * adll_shift_lock[if_id][pup]; + } + } + + /* Only if not all Pups Lock */ + if (all_lock == 0) { + DEBUG_PBS_ENGINE(DEBUG_LEVEL_INFO, + ("##########ADLL shift for SBA###########\n")); + + /* ADLL shift for SBA */ + search_dir = (pbs_mode == PBS_RX_MODE) ? HWS_LOW2HIGH : + HWS_HIGH2LOW; + init_val = (search_dir == HWS_LOW2HIGH) ? 0 : iterations; + for (pup = 0; pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; + if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + if (adll_shift_lock[if_id][pup] == 1) { + /*if pup lock continue to next pup */ + continue; + } + /*init the var altogth init before */ + adll_shift_lock[if_id][pup] = 0; + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (0x54 + effective_cs * 0x10) : + (0x14 + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, 0)); + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (0x55 + effective_cs * 0x10) : + (0x15 + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, 0)); + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (0x5f + effective_cs * 0x10) : + (0x1f + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, 0)); + /* initilaze the Edge2 Max. */ + adll_shift_val[if_id][pup] = 0; + min_adll_per_pup[if_id][pup] = 0x1f; + max_adll_per_pup[if_id][pup] = 0x0; + + ddr3_tip_ip_training(dev_num, + ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, + RESULT_PER_BIT, + HWS_CONTROL_ELEMENT_ADLL, + search_dir, dir, + tm->if_act_mask, + init_val, iterations, + pbs_pattern, + search_edge, CS_SINGLE, + cs_num, train_status); + + for (bit = 0; bit < BUS_WIDTH_IN_BITS; bit++) { + CHECK_STATUS(ddr3_tip_if_read + (dev_num, + ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, + mask_results_dq_reg_map + [bit + + pup * + BUS_WIDTH_IN_BITS], + res0, MASK_ALL_BITS)); + DEBUG_PBS_ENGINE( + DEBUG_LEVEL_INFO, + ("FP I/F %d, bit:%d, pup:%d res0 0x%x\n", + if_id, bit, pup, res0[if_id])); + if ((res0[if_id] & 0x2000000) == 0) { + /* exit the bit loop */ + bit = BUS_WIDTH_IN_BITS; + /* Fail SBA --> Fail PBS */ + pup_state[if_id][pup] = 1; + DEBUG_PBS_ENGINE + (DEBUG_LEVEL_INFO, + (" SBA Fail\n")); + continue; + } else { + /* + * - increment to get all + * 8 bit lock. + */ + adll_shift_lock[if_id][pup]++; + /* + * The search ended in Pass + * we need Fail + */ + res0[if_id] = + (pbs_mode == PBS_RX_MODE) ? + ((res0[if_id] & res_valid_mask) + 1) : + ((res0[if_id] & res_valid_mask) - 1); + max_adll_per_pup[if_id][pup] = + (max_adll_per_pup[if_id] + [pup] < res0[if_id]) ? + (u8)res0[if_id] : + max_adll_per_pup[if_id][pup]; + min_adll_per_pup[if_id][pup] = + (res0[if_id] > + min_adll_per_pup[if_id] + [pup]) ? + min_adll_per_pup[if_id][pup] : + (u8)res0[if_id]; + /* + * vs the Rx we are searching for + * the smallest value of DQ shift + * so all Bus would fail + */ + adll_shift_val[if_id][pup] = + (pbs_mode == PBS_RX_MODE) ? + max_adll_per_pup[if_id][pup] : + min_adll_per_pup[if_id][pup]; + } + } + /* 1 is lock */ + adll_shift_lock[if_id][pup] = + (adll_shift_lock[if_id][pup] == 8) ? + 1 : 0; + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (0x3 + effective_cs * 4) : + (0x1 + effective_cs * 4); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + adll_shift_val[if_id][pup])); + DEBUG_PBS_ENGINE( + DEBUG_LEVEL_INFO, + ("adll_shift_lock[%x][%x] = %x\n", + if_id, pup, + adll_shift_lock[if_id][pup])); + } + } + + /* End ADLL Shift for SBA */ + /* Start the Per Bit Skew search */ + /* The ADLL shift finished with a Pass */ + search_edge = (pbs_mode == PBS_RX_MODE) ? EDGE_PF : EDGE_FP; + search_dir = (pbs_mode == PBS_RX_MODE) ? + HWS_LOW2HIGH : HWS_HIGH2LOW; + iterations = 0x1f; + /* - The initial value is different in Rx and Tx mode */ + init_val = (pbs_mode == PBS_RX_MODE) ? 0 : iterations; + + ddr3_tip_ip_training(dev_num, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, RESULT_PER_BIT, + HWS_CONTROL_ELEMENT_DQ_SKEW, + search_dir, dir, tm->if_act_mask, + init_val, iterations, pbs_pattern, + search_edge, CS_SINGLE, cs_num, + train_status); + + for (pup = 0; pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; + if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bit = 0; bit < BUS_WIDTH_IN_BITS; bit++) { + CHECK_STATUS(ddr3_tip_if_read + (dev_num, + ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, + mask_results_dq_reg_map + [bit + + pup * + BUS_WIDTH_IN_BITS], + res0, MASK_ALL_BITS)); + if (pup_state[if_id][pup] != 2) { + /* + * if pup is not SBA continue + * to next pup + */ + bit = BUS_WIDTH_IN_BITS; + continue; + } + DEBUG_PBS_ENGINE( + DEBUG_LEVEL_INFO, + ("Per Bit Skew search, PF I/F %d, bit:%d, pup:%d res0 0x%x\n", + if_id, bit, pup, res0[if_id])); + if ((res0[if_id] & 0x2000000) == 0) { + DEBUG_PBS_ENGINE + (DEBUG_LEVEL_INFO, + ("SBA Fail\n")); + + max_pbs_per_pup[if_id][pup] = + 0x1f; + result_all_bit[ + bit + pup * + BUS_WIDTH_IN_BITS + + if_id * MAX_BUS_NUM * + BUS_WIDTH_IN_BITS] = + 0x1f; + } else { + temp = (u8)(res0[if_id] & + res_valid_mask); + max_pbs_per_pup[if_id][pup] = + (temp > + max_pbs_per_pup[if_id] + [pup]) ? temp : + max_pbs_per_pup + [if_id][pup]; + min_pbs_per_pup[if_id][pup] = + (temp < + min_pbs_per_pup[if_id] + [pup]) ? temp : + min_pbs_per_pup + [if_id][pup]; + result_all_bit[ + bit + pup * + BUS_WIDTH_IN_BITS + + if_id * MAX_BUS_NUM * + BUS_WIDTH_IN_BITS] = + temp; + adll_shift_lock[if_id][pup] = 1; + } + } + } + } + + /* Check all Pup state */ + all_lock = 1; + for (pup = 0; pup < tm->num_of_bus_per_interface; pup++) { + /* + * DEBUG_PBS_ENGINE(DEBUG_LEVEL_INFO, + * ("pup_state[%d][%d] = %d\n",if_id,pup,pup_state + * [if_id][pup])); + */ + } + } + + /* END OF SBA */ + /* Norm */ + for (pup = 0; pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + for (bit = 0; bit < BUS_WIDTH_IN_BITS; bit++) { + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; + if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + /* if pup not lock continue to next pup */ + if (adll_shift_lock[if_id][pup] != 1) { + DEBUG_PBS_ENGINE( + DEBUG_LEVEL_ERROR, + ("PBS failed for IF #%d\n", + if_id)); + training_result[training_stage][if_id] + = TEST_FAILED; + + result_mat[if_id][pup][bit] = 0; + max_pbs_per_pup[if_id][pup] = 0; + min_pbs_per_pup[if_id][pup] = 0; + } else { + training_result[ + training_stage][if_id] = + (training_result[training_stage] + [if_id] == TEST_FAILED) ? + TEST_FAILED : TEST_SUCCESS; + result_mat[if_id][pup][bit] = + result_all_bit[ + bit + pup * + BUS_WIDTH_IN_BITS + + if_id * MAX_BUS_NUM * + BUS_WIDTH_IN_BITS] - + min_pbs_per_pup[if_id][pup]; + } + DEBUG_PBS_ENGINE( + DEBUG_LEVEL_INFO, + ("The abs min_pbs[%d][%d] = %d\n", + if_id, pup, + min_pbs_per_pup[if_id][pup])); + } + } + } + + /* Clean all results */ + ddr3_tip_clean_pbs_result(dev_num, pbs_mode); + + /* DQ PBS register update with the final result */ + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (pup = 0; pup < tm->num_of_bus_per_interface; pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + + DEBUG_PBS_ENGINE( + DEBUG_LEVEL_INFO, + ("Final Results: if_id %d, pup %d, Pup State: %d\n", + if_id, pup, pup_state[if_id][pup])); + for (bit = 0; bit < BUS_WIDTH_IN_BITS; bit++) { + if (dq_map_table == NULL) { + DEBUG_PBS_ENGINE( + DEBUG_LEVEL_ERROR, + ("dq_map_table not initialized\n")); + return MV_FAIL; + } + pad_num = dq_map_table[ + bit + pup * BUS_WIDTH_IN_BITS + + if_id * BUS_WIDTH_IN_BITS * + tm->num_of_bus_per_interface]; + DEBUG_PBS_ENGINE(DEBUG_LEVEL_INFO, + ("result_mat: %d ", + result_mat[if_id][pup] + [bit])); + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (PBS_RX_PHY_REG + effective_cs * 0x10) : + (PBS_TX_PHY_REG + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr + pad_num, + result_mat[if_id][pup][bit])); + } + pbsdelay_per_pup[pbs_mode][if_id][pup] = + (max_pbs_per_pup[if_id][pup] == + min_pbs_per_pup[if_id][pup]) ? + TYPICAL_PBS_VALUE : + ((max_adll_per_pup[if_id][pup] - + min_adll_per_pup[if_id][pup]) * adll_tap / + (max_pbs_per_pup[if_id][pup] - + min_pbs_per_pup[if_id][pup])); + + /* RX results ready, write RX also */ + if (pbs_mode == PBS_TX_MODE) { + /* Write TX results */ + reg_addr = (0x14 + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + (max_pbs_per_pup[if_id][pup] - + min_pbs_per_pup[if_id][pup]) / + 2)); + reg_addr = (0x15 + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + (max_pbs_per_pup[if_id][pup] - + min_pbs_per_pup[if_id][pup]) / + 2)); + + /* Write previously stored RX results */ + reg_addr = (0x54 + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + result_mat_rx_dqs[if_id][pup] + [effective_cs])); + reg_addr = (0x55 + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr, + result_mat_rx_dqs[if_id][pup] + [effective_cs])); + } else { + /* + * RX results may affect RL results correctess, + * so just store the results that will written + * in TX stage + */ + result_mat_rx_dqs[if_id][pup][effective_cs] = + (max_pbs_per_pup[if_id][pup] - + min_pbs_per_pup[if_id][pup]) / 2; + } + DEBUG_PBS_ENGINE( + DEBUG_LEVEL_INFO, + (", PBS tap=%d [psec] ==> skew observed = %d\n", + pbsdelay_per_pup[pbs_mode][if_id][pup], + ((max_pbs_per_pup[if_id][pup] - + min_pbs_per_pup[if_id][pup]) * + pbsdelay_per_pup[pbs_mode][if_id][pup]))); + } + } + + /* Write back to the phy the default values */ + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (READ_CENTRALIZATION_PHY_REG + effective_cs * 4) : + (WRITE_CENTRALIZATION_PHY_REG + effective_cs * 4); + write_adll_value(nominal_adll, reg_addr); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + reg_addr = (pbs_mode == PBS_RX_MODE) ? + (0x5a + effective_cs * 0x10) : + (0x1a + effective_cs * 0x10); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, pup, DDR_PHY_DATA, reg_addr, + 0)); + + /* restore cs enable value */ + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + CS_ENABLE_REG, cs_enable_reg_val[if_id], + MASK_ALL_BITS)); + } + + /* exit test mode */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ODPG_WRITE_READ_MODE_ENABLE_REG, 0xffff, MASK_ALL_BITS)); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + /* + * meaning that there is no VW exist at all (No lock at + * the EBA ADLL shift at EBS) + */ + if (pup_state[if_id][pup] == 1) + return MV_FAIL; + } + + return MV_OK; +} + +/* + * Name: ddr3_tip_pbs_rx. + * Desc: PBS TX + * Args: TBD + * Notes: + * Returns: OK if success, other error code if fail. + */ +int ddr3_tip_pbs_rx(u32 uidev_num) +{ + return ddr3_tip_pbs(uidev_num, PBS_RX_MODE); +} + +/* + * Name: ddr3_tip_pbs_tx. + * Desc: PBS TX + * Args: TBD + * Notes: + * Returns: OK if success, other error code if fail. + */ +int ddr3_tip_pbs_tx(u32 uidev_num) +{ + return ddr3_tip_pbs(uidev_num, PBS_TX_MODE); +} + +#ifndef EXCLUDE_SWITCH_DEBUG +/* + * Print PBS Result + */ +int ddr3_tip_print_all_pbs_result(u32 dev_num) +{ + u32 curr_cs; + u32 max_cs = hws_ddr3_tip_max_cs_get(); + + for (curr_cs = 0; curr_cs < max_cs; curr_cs++) { + ddr3_tip_print_pbs_result(dev_num, curr_cs, PBS_RX_MODE); + ddr3_tip_print_pbs_result(dev_num, curr_cs, PBS_TX_MODE); + } + + return MV_OK; +} + +/* + * Print PBS Result + */ +int ddr3_tip_print_pbs_result(u32 dev_num, u32 cs_num, enum pbs_dir pbs_mode) +{ + u32 data_value = 0, bit = 0, if_id = 0, pup = 0; + u32 reg_addr = (pbs_mode == PBS_RX_MODE) ? + (PBS_RX_PHY_REG + cs_num * 0x10) : + (PBS_TX_PHY_REG + cs_num * 0x10); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + printf("CS%d, %s ,PBS\n", cs_num, + (pbs_mode == PBS_RX_MODE) ? "Rx" : "Tx"); + + for (bit = 0; bit < BUS_WIDTH_IN_BITS; bit++) { + printf("%s, DQ", (pbs_mode == PBS_RX_MODE) ? "Rx" : "Tx"); + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + printf("%d ,PBS,,, ", bit); + for (pup = 0; pup <= tm->num_of_bus_per_interface; + pup++) { + VALIDATE_ACTIVE(tm->bus_act_mask, pup); + CHECK_STATUS(ddr3_tip_bus_read + (dev_num, if_id, + ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr + bit, + &data_value)); + printf("%d , ", data_value); + } + } + printf("\n"); + } + printf("\n"); + + return MV_OK; +} +#endif + +/* + * Fixup PBS Result + */ +int ddr3_tip_clean_pbs_result(u32 dev_num, enum pbs_dir pbs_mode) +{ + u32 if_id, pup, bit; + u32 reg_addr = (pbs_mode == PBS_RX_MODE) ? + (PBS_RX_PHY_REG + effective_cs * 0x10) : + (PBS_TX_PHY_REG + effective_cs * 0x10); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (pup = 0; pup <= tm->num_of_bus_per_interface; pup++) { + for (bit = 0; bit <= BUS_WIDTH_IN_BITS + 3; bit++) { + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, ACCESS_TYPE_UNICAST, pup, + DDR_PHY_DATA, reg_addr + bit, 0)); + } + } + } + + return MV_OK; +} diff --git a/drivers/ddr/marvell/a38x/ddr3_training_static.c b/drivers/ddr/marvell/a38x/ddr3_training_static.c new file mode 100644 index 0000000..5101f3f --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr3_training_static.c @@ -0,0 +1,538 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +/* Design Guidelines parameters */ +u32 g_zpri_data = 123; /* controller data - P drive strength */ +u32 g_znri_data = 123; /* controller data - N drive strength */ +u32 g_zpri_ctrl = 74; /* controller C/A - P drive strength */ +u32 g_znri_ctrl = 74; /* controller C/A - N drive strength */ +u32 g_zpodt_data = 45; /* controller data - P ODT */ +u32 g_znodt_data = 45; /* controller data - N ODT */ +u32 g_zpodt_ctrl = 45; /* controller data - P ODT */ +u32 g_znodt_ctrl = 45; /* controller data - N ODT */ +u32 g_odt_config = 0x120012; +u32 g_rtt_nom = 0x44; +u32 g_dic = 0x2; + +#ifdef STATIC_ALGO_SUPPORT + +#define PARAM_NOT_CARE 0 +#define MAX_STATIC_SEQ 48 + +u32 silicon_delay[HWS_MAX_DEVICE_NUM]; +struct hws_tip_static_config_info static_config[HWS_MAX_DEVICE_NUM]; +static reg_data *static_init_controller_config[HWS_MAX_DEVICE_NUM]; + +/* debug delay in write leveling */ +int wl_debug_delay = 0; +/* pup register #3 for functional board */ +int function_reg_value = 8; +u32 silicon; + +u32 read_ready_delay_phase_offset[] = { 4, 4, 4, 4, 6, 6, 6, 6 }; + +static struct cs_element chip_select_map[] = { + /* CS Value (single only) Num_CS */ + {0, 0}, + {0, 1}, + {1, 1}, + {0, 2}, + {2, 1}, + {0, 2}, + {0, 2}, + {0, 3}, + {3, 1}, + {0, 2}, + {0, 2}, + {0, 3}, + {0, 2}, + {0, 3}, + {0, 3}, + {0, 4} +}; + +/* + * Register static init controller DB + */ +int ddr3_tip_init_specific_reg_config(u32 dev_num, reg_data *reg_config_arr) +{ + static_init_controller_config[dev_num] = reg_config_arr; + return MV_OK; +} + +/* + * Register static info DB + */ +int ddr3_tip_init_static_config_db( + u32 dev_num, struct hws_tip_static_config_info *static_config_info) +{ + static_config[dev_num].board_trace_arr = + static_config_info->board_trace_arr; + static_config[dev_num].package_trace_arr = + static_config_info->package_trace_arr; + silicon_delay[dev_num] = static_config_info->silicon_delay; + + return MV_OK; +} + +/* + * Static round trip flow - Calculates the total round trip delay. + */ +int ddr3_tip_static_round_trip_arr_build(u32 dev_num, + struct trip_delay_element *table_ptr, + int is_wl, u32 *round_trip_delay_arr) +{ + u32 bus_index, global_bus; + u32 if_id; + u32 bus_per_interface; + int sign; + u32 temp; + u32 board_trace; + struct trip_delay_element *pkg_delay_ptr; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + /* + * In WL we calc the diff between Clock to DQs in RL we sum the round + * trip of Clock and DQs + */ + sign = (is_wl) ? -1 : 1; + + bus_per_interface = GET_TOPOLOGY_NUM_OF_BUSES(); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + for (bus_index = 0; bus_index < bus_per_interface; + bus_index++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_index); + global_bus = (if_id * bus_per_interface) + bus_index; + + /* calculate total trip delay (package and board) */ + board_trace = (table_ptr[global_bus].dqs_delay * sign) + + table_ptr[global_bus].ck_delay; + temp = (board_trace * 163) / 1000; + + /* Convert the length to delay in psec units */ + pkg_delay_ptr = + static_config[dev_num].package_trace_arr; + round_trip_delay_arr[global_bus] = temp + + (int)(pkg_delay_ptr[global_bus].dqs_delay * + sign) + + (int)pkg_delay_ptr[global_bus].ck_delay + + (int)((is_wl == 1) ? wl_debug_delay : + (int)silicon_delay[dev_num]); + DEBUG_TRAINING_STATIC_IP( + DEBUG_LEVEL_TRACE, + ("Round Trip Build round_trip_delay_arr[0x%x]: 0x%x temp 0x%x\n", + global_bus, round_trip_delay_arr[global_bus], + temp)); + } + } + + return MV_OK; +} + +/* + * Write leveling for static flow - calculating the round trip delay of the + * DQS signal. + */ +int ddr3_tip_write_leveling_static_config(u32 dev_num, u32 if_id, + enum hws_ddr_freq frequency, + u32 *round_trip_delay_arr) +{ + u32 bus_index; /* index to the bus loop */ + u32 bus_start_index; + u32 bus_per_interface; + u32 phase = 0; + u32 adll = 0, adll_cen, adll_inv, adll_final; + u32 adll_period = MEGA / freq_val[frequency] / 64; + + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("ddr3_tip_write_leveling_static_config\n")); + DEBUG_TRAINING_STATIC_IP( + DEBUG_LEVEL_TRACE, + ("dev_num 0x%x IF 0x%x freq %d (adll_period 0x%x)\n", + dev_num, if_id, frequency, adll_period)); + + bus_per_interface = GET_TOPOLOGY_NUM_OF_BUSES(); + bus_start_index = if_id * bus_per_interface; + for (bus_index = bus_start_index; + bus_index < (bus_start_index + bus_per_interface); bus_index++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_index); + phase = round_trip_delay_arr[bus_index] / (32 * adll_period); + adll = (round_trip_delay_arr[bus_index] - + (phase * 32 * adll_period)) / adll_period; + adll = (adll > 31) ? 31 : adll; + adll_cen = 16 + adll; + adll_inv = adll_cen / 32; + adll_final = adll_cen - (adll_inv * 32); + adll_final = (adll_final > 31) ? 31 : adll_final; + + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("\t%d - phase 0x%x adll 0x%x\n", + bus_index, phase, adll)); + /* + * Writing to all 4 phy of Interface number, + * bit 0 \96 4 \96 ADLL, bit 6-8 phase + */ + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + (bus_index % 4), DDR_PHY_DATA, + PHY_WRITE_DELAY(cs), + ((phase << 6) + (adll & 0x1f)), 0x1df)); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, (bus_index % 4), + DDR_PHY_DATA, WRITE_CENTRALIZATION_PHY_REG, + ((adll_inv & 0x1) << 5) + adll_final)); + } + + return MV_OK; +} + +/* + * Read leveling for static flow + */ +int ddr3_tip_read_leveling_static_config(u32 dev_num, + u32 if_id, + enum hws_ddr_freq frequency, + u32 *total_round_trip_delay_arr) +{ + u32 cs, data0, data1, data3 = 0; + u32 bus_index; /* index to the bus loop */ + u32 bus_start_index; + u32 phase0, phase1, max_phase; + u32 adll0, adll1; + u32 cl_value; + u32 min_delay; + u32 sdr_period = MEGA / freq_val[frequency]; + u32 ddr_period = MEGA / freq_val[frequency] / 2; + u32 adll_period = MEGA / freq_val[frequency] / 64; + enum hws_speed_bin speed_bin_index; + u32 rd_sample_dly[MAX_CS_NUM] = { 0 }; + u32 rd_ready_del[MAX_CS_NUM] = { 0 }; + u32 bus_per_interface = GET_TOPOLOGY_NUM_OF_BUSES(); + struct hws_topology_map *tm = ddr3_get_topology_map(); + + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("ddr3_tip_read_leveling_static_config\n")); + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("dev_num 0x%x ifc 0x%x freq %d\n", dev_num, + if_id, frequency)); + DEBUG_TRAINING_STATIC_IP( + DEBUG_LEVEL_TRACE, + ("Sdr_period 0x%x Ddr_period 0x%x adll_period 0x%x\n", + sdr_period, ddr_period, adll_period)); + + if (tm->interface_params[first_active_if].memory_freq == + frequency) { + cl_value = tm->interface_params[first_active_if].cas_l; + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("cl_value 0x%x\n", cl_value)); + } else { + speed_bin_index = tm->interface_params[if_id].speed_bin_index; + cl_value = cas_latency_table[speed_bin_index].cl_val[frequency]; + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("cl_value 0x%x speed_bin_index %d\n", + cl_value, speed_bin_index)); + } + + bus_start_index = if_id * bus_per_interface; + + for (bus_index = bus_start_index; + bus_index < (bus_start_index + bus_per_interface); + bus_index += 2) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_index); + cs = chip_select_map[ + tm->interface_params[if_id].as_bus_params[ + (bus_index % 4)].cs_bitmask].cs_num; + + /* read sample delay calculation */ + min_delay = (total_round_trip_delay_arr[bus_index] < + total_round_trip_delay_arr[bus_index + 1]) ? + total_round_trip_delay_arr[bus_index] : + total_round_trip_delay_arr[bus_index + 1]; + /* round down */ + rd_sample_dly[cs] = 2 * (min_delay / (sdr_period * 2)); + DEBUG_TRAINING_STATIC_IP( + DEBUG_LEVEL_TRACE, + ("\t%d - min_delay 0x%x cs 0x%x rd_sample_dly[cs] 0x%x\n", + bus_index, min_delay, cs, rd_sample_dly[cs])); + + /* phase calculation */ + phase0 = (total_round_trip_delay_arr[bus_index] - + (sdr_period * rd_sample_dly[cs])) / (ddr_period); + phase1 = (total_round_trip_delay_arr[bus_index + 1] - + (sdr_period * rd_sample_dly[cs])) / (ddr_period); + max_phase = (phase0 > phase1) ? phase0 : phase1; + DEBUG_TRAINING_STATIC_IP( + DEBUG_LEVEL_TRACE, + ("\tphase0 0x%x phase1 0x%x max_phase 0x%x\n", + phase0, phase1, max_phase)); + + /* ADLL calculation */ + adll0 = (u32)((total_round_trip_delay_arr[bus_index] - + (sdr_period * rd_sample_dly[cs]) - + (ddr_period * phase0)) / adll_period); + adll0 = (adll0 > 31) ? 31 : adll0; + adll1 = (u32)((total_round_trip_delay_arr[bus_index + 1] - + (sdr_period * rd_sample_dly[cs]) - + (ddr_period * phase1)) / adll_period); + adll1 = (adll1 > 31) ? 31 : adll1; + + /* The Read delay close the Read FIFO */ + rd_ready_del[cs] = rd_sample_dly[cs] + + read_ready_delay_phase_offset[max_phase]; + DEBUG_TRAINING_STATIC_IP( + DEBUG_LEVEL_TRACE, + ("\tadll0 0x%x adll1 0x%x rd_ready_del[cs] 0x%x\n", + adll0, adll1, rd_ready_del[cs])); + + /* + * Write to the phy of Interface (bit 0 \96 4 \96 ADLL, + * bit 6-8 phase) + */ + data0 = ((phase0 << 6) + (adll0 & 0x1f)); + data1 = ((phase1 << 6) + (adll1 & 0x1f)); + + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + (bus_index % 4), DDR_PHY_DATA, PHY_READ_DELAY(cs), + data0, 0x1df)); + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + ((bus_index + 1) % 4), DDR_PHY_DATA, + PHY_READ_DELAY(cs), data1, 0x1df)); + } + + for (bus_index = 0; bus_index < bus_per_interface; bus_index++) { + VALIDATE_ACTIVE(tm->bus_act_mask, bus_index); + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + bus_index, DDR_PHY_DATA, 0x3, data3, 0x1f)); + } + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + READ_DATA_SAMPLE_DELAY, + (rd_sample_dly[0] + cl_value) + (rd_sample_dly[1] << 8), + MASK_ALL_BITS)); + + /* Read_ready_del0 bit 0-4 , CS bits 8-12 */ + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_UNICAST, if_id, + READ_DATA_READY_DELAY, + rd_ready_del[0] + (rd_ready_del[1] << 8) + cl_value, + MASK_ALL_BITS)); + + return MV_OK; +} + +/* + * DDR3 Static flow + */ +int ddr3_tip_run_static_alg(u32 dev_num, enum hws_ddr_freq freq) +{ + u32 if_id = 0; + struct trip_delay_element *table_ptr; + u32 wl_total_round_trip_delay_arr[MAX_TOTAL_BUS_NUM]; + u32 rl_total_round_trip_delay_arr[MAX_TOTAL_BUS_NUM]; + struct init_cntr_param init_cntr_prm; + int ret; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("ddr3_tip_run_static_alg")); + + init_cntr_prm.do_mrs_phy = 1; + init_cntr_prm.is_ctrl64_bit = 0; + init_cntr_prm.init_phy = 1; + ret = hws_ddr3_tip_init_controller(dev_num, &init_cntr_prm); + if (ret != MV_OK) { + DEBUG_TRAINING_STATIC_IP( + DEBUG_LEVEL_ERROR, + ("hws_ddr3_tip_init_controller failure\n")); + } + + /* calculate the round trip delay for Write Leveling */ + table_ptr = static_config[dev_num].board_trace_arr; + CHECK_STATUS(ddr3_tip_static_round_trip_arr_build + (dev_num, table_ptr, 1, + wl_total_round_trip_delay_arr)); + /* calculate the round trip delay for Read Leveling */ + CHECK_STATUS(ddr3_tip_static_round_trip_arr_build + (dev_num, table_ptr, 0, + rl_total_round_trip_delay_arr)); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + /* check if the interface is enabled */ + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + /* + * Static frequency is defined according to init-frequency + * (not target) + */ + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("Static IF %d freq %d\n", + if_id, freq)); + CHECK_STATUS(ddr3_tip_write_leveling_static_config + (dev_num, if_id, freq, + wl_total_round_trip_delay_arr)); + CHECK_STATUS(ddr3_tip_read_leveling_static_config + (dev_num, if_id, freq, + rl_total_round_trip_delay_arr)); + } + + return MV_OK; +} + +/* + * Init controller for static flow + */ +int ddr3_tip_static_init_controller(u32 dev_num) +{ + u32 index_cnt = 0; + + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("ddr3_tip_static_init_controller\n")); + while (static_init_controller_config[dev_num][index_cnt].reg_addr != + 0) { + CHECK_STATUS(ddr3_tip_if_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + static_init_controller_config[dev_num][index_cnt]. + reg_addr, + static_init_controller_config[dev_num][index_cnt]. + reg_data, + static_init_controller_config[dev_num][index_cnt]. + reg_mask)); + + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("Init_controller index_cnt %d\n", + index_cnt)); + index_cnt++; + } + + return MV_OK; +} + +int ddr3_tip_static_phy_init_controller(u32 dev_num) +{ + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("Phy Init Controller 2\n")); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_DATA, 0xa4, + 0x3dfe)); + + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("Phy Init Controller 3\n")); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_DATA, 0xa6, + 0xcb2)); + + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("Phy Init Controller 4\n")); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_DATA, 0xa9, + 0)); + + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("Static Receiver Calibration\n")); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_DATA, 0xd0, + 0x1f)); + + DEBUG_TRAINING_STATIC_IP(DEBUG_LEVEL_TRACE, + ("Static V-REF Calibration\n")); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_DATA, 0xa8, + 0x434)); + + return MV_OK; +} +#endif + +/* + * Configure phy (called by static init controller) for static flow + */ +int ddr3_tip_configure_phy(u32 dev_num) +{ + u32 if_id, phy_id; + struct hws_topology_map *tm = ddr3_get_topology_map(); + + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_DATA, + PAD_ZRI_CALIB_PHY_REG, + ((0x7f & g_zpri_data) << 7 | (0x7f & g_znri_data)))); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_CONTROL, + PAD_ZRI_CALIB_PHY_REG, + ((0x7f & g_zpri_ctrl) << 7 | (0x7f & g_znri_ctrl)))); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_DATA, + PAD_ODT_CALIB_PHY_REG, + ((0x3f & g_zpodt_data) << 6 | (0x3f & g_znodt_data)))); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_CONTROL, + PAD_ODT_CALIB_PHY_REG, + ((0x3f & g_zpodt_ctrl) << 6 | (0x3f & g_znodt_ctrl)))); + + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_DATA, + PAD_PRE_DISABLE_PHY_REG, 0)); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_DATA, + CMOS_CONFIG_PHY_REG, 0)); + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_CONTROL, + CMOS_CONFIG_PHY_REG, 0)); + + for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { + /* check if the interface is enabled */ + VALIDATE_ACTIVE(tm->if_act_mask, if_id); + + for (phy_id = 0; + phy_id < tm->num_of_bus_per_interface; + phy_id++) { + VALIDATE_ACTIVE(tm->bus_act_mask, phy_id); + /* Vref & clamp */ + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, phy_id, DDR_PHY_DATA, + PAD_CONFIG_PHY_REG, + ((clamp_tbl[if_id] << 4) | vref), + ((0x7 << 4) | 0x7))); + /* clamp not relevant for control */ + CHECK_STATUS(ddr3_tip_bus_read_modify_write + (dev_num, ACCESS_TYPE_UNICAST, + if_id, phy_id, DDR_PHY_CONTROL, + PAD_CONFIG_PHY_REG, 0x4, 0x7)); + } + } + + CHECK_STATUS(ddr3_tip_bus_write + (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_DATA, 0x90, + 0x6002)); + + return MV_OK; +} diff --git a/drivers/ddr/marvell/a38x/ddr_topology_def.h b/drivers/ddr/marvell/a38x/ddr_topology_def.h new file mode 100644 index 0000000..f8894e8 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr_topology_def.h @@ -0,0 +1,112 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR_TOPOLOGY_DEF_H +#define _DDR_TOPOLOGY_DEF_H + +#include "ddr3_training_ip_def.h" +#include "ddr3_topology_def.h" + +#if defined(CONFIG_ARMADA_38X) +#include "ddr3_a38x.h" +#endif + +/* bus width in bits */ +enum hws_bus_width { + BUS_WIDTH_4, + BUS_WIDTH_8, + BUS_WIDTH_16, + BUS_WIDTH_32 +}; + +enum hws_temperature { + HWS_TEMP_LOW, + HWS_TEMP_NORMAL, + HWS_TEMP_HIGH +}; + +enum hws_mem_size { + MEM_512M, + MEM_1G, + MEM_2G, + MEM_4G, + MEM_8G, + MEM_SIZE_LAST +}; + +struct bus_params { + /* Chip Select (CS) bitmask (bits 0-CS0, bit 1- CS1 ...) */ + u8 cs_bitmask; + + /* + * mirror enable/disable + * (bits 0-CS0 mirroring, bit 1- CS1 mirroring ...) + */ + int mirror_enable_bitmask; + + /* DQS Swap (polarity) - true if enable */ + int is_dqs_swap; + + /* CK swap (polarity) - true if enable */ + int is_ck_swap; +}; + +struct if_params { + /* bus configuration */ + struct bus_params as_bus_params[MAX_BUS_NUM]; + + /* Speed Bin Table */ + enum hws_speed_bin speed_bin_index; + + /* bus width of memory */ + enum hws_bus_width bus_width; + + /* Bus memory size (MBit) */ + enum hws_mem_size memory_size; + + /* The DDR frequency for each interfaces */ + enum hws_ddr_freq memory_freq; + + /* + * delay CAS Write Latency + * - 0 for using default value (jedec suggested) + */ + u8 cas_wl; + + /* + * delay CAS Latency + * - 0 for using default value (jedec suggested) + */ + u8 cas_l; + + /* operation temperature */ + enum hws_temperature interface_temp; +}; + +struct hws_topology_map { + /* Number of interfaces (default is 12) */ + u8 if_act_mask; + + /* Controller configuration per interface */ + struct if_params interface_params[MAX_INTERFACE_NUM]; + + /* BUS per interface (default is 4) */ + u8 num_of_bus_per_interface; + + /* Bit mask for active buses */ + u8 bus_act_mask; +}; + +/* DDR3 training global configuration parameters */ +struct tune_train_params { + u32 ck_delay; + u32 ck_delay_16; + u32 p_finger; + u32 n_finger; + u32 phy_reg3_val; +}; + +#endif /* _DDR_TOPOLOGY_DEF_H */ diff --git a/drivers/ddr/marvell/a38x/ddr_training_ip_db.h b/drivers/ddr/marvell/a38x/ddr_training_ip_db.h new file mode 100644 index 0000000..ff5f817 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr_training_ip_db.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _DDR_TRAINING_IP_DB_H_ +#define _DDR_TRAINING_IP_DB_H_ + +#include "ddr_topology_def.h" +#include "ddr3_training_ip_db.h" + +u32 speed_bin_table(u8 index, enum speed_bin_table_elements element); +u32 pattern_table_get_word(u32 dev_num, enum hws_pattern type, u8 index); + +#endif /* _DDR3_TRAINING_IP_DB_H_ */ diff --git a/drivers/ddr/marvell/a38x/silicon_if.h b/drivers/ddr/marvell/a38x/silicon_if.h new file mode 100644 index 0000000..7fce27d --- /dev/null +++ b/drivers/ddr/marvell/a38x/silicon_if.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __silicon_if_H +#define __silicon_if_H + +/* max number of devices supported by driver */ +#ifdef CO_CPU_RUN +#define HWS_MAX_DEVICE_NUM (1) +#else +#define HWS_MAX_DEVICE_NUM (16) +#endif + +#endif /* __silicon_if_H */ diff --git a/drivers/ddr/marvell/a38x/xor.c b/drivers/ddr/marvell/a38x/xor.c new file mode 100644 index 0000000..9c73c54 --- /dev/null +++ b/drivers/ddr/marvell/a38x/xor.c @@ -0,0 +1,356 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" +#include "xor_regs.h" + +/* defines */ +#ifdef MV_DEBUG +#define DB(x) x +#else +#define DB(x) +#endif + +static u32 ui_xor_regs_ctrl_backup; +static u32 ui_xor_regs_base_backup[MAX_CS]; +static u32 ui_xor_regs_mask_backup[MAX_CS]; + +void mv_sys_xor_init(u32 num_of_cs, u32 cs_ena, u32 cs_size, u32 base_delta) +{ + u32 reg, ui, base, cs_count; + + ui_xor_regs_ctrl_backup = reg_read(XOR_WINDOW_CTRL_REG(0, 0)); + for (ui = 0; ui < MAX_CS; ui++) + ui_xor_regs_base_backup[ui] = + reg_read(XOR_BASE_ADDR_REG(0, ui)); + for (ui = 0; ui < MAX_CS; ui++) + ui_xor_regs_mask_backup[ui] = + reg_read(XOR_SIZE_MASK_REG(0, ui)); + + reg = 0; + for (ui = 0; ui < (num_of_cs); ui++) { + /* Enable Window x for each CS */ + reg |= (0x1 << (ui)); + /* Enable Window x for each CS */ + reg |= (0x3 << ((ui * 2) + 16)); + } + + reg_write(XOR_WINDOW_CTRL_REG(0, 0), reg); + + cs_count = 0; + for (ui = 0; ui < num_of_cs; ui++) { + if (cs_ena & (1 << ui)) { + /* + * window x - Base - 0x00000000, + * Attribute 0x0e - DRAM + */ + base = cs_size * ui + base_delta; + switch (ui) { + case 0: + base |= 0xe00; + break; + case 1: + base |= 0xd00; + break; + case 2: + base |= 0xb00; + break; + case 3: + base |= 0x700; + break; + } + + reg_write(XOR_BASE_ADDR_REG(0, cs_count), base); + + /* window x - Size */ + reg_write(XOR_SIZE_MASK_REG(0, cs_count), 0x7fff0000); + cs_count++; + } + } + + mv_xor_hal_init(1); + + return; +} + +void mv_sys_xor_finish(void) +{ + u32 ui; + + reg_write(XOR_WINDOW_CTRL_REG(0, 0), ui_xor_regs_ctrl_backup); + for (ui = 0; ui < MAX_CS; ui++) + reg_write(XOR_BASE_ADDR_REG(0, ui), + ui_xor_regs_base_backup[ui]); + for (ui = 0; ui < MAX_CS; ui++) + reg_write(XOR_SIZE_MASK_REG(0, ui), + ui_xor_regs_mask_backup[ui]); + + reg_write(XOR_ADDR_OVRD_REG(0, 0), 0); +} + +/* + * mv_xor_hal_init - Initialize XOR engine + * + * DESCRIPTION: + * This function initialize XOR unit. + * INPUT: + * None. + * + * OUTPUT: + * None. + * + * RETURN: + * MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise. + */ +void mv_xor_hal_init(u32 xor_chan_num) +{ + u32 i; + + /* Abort any XOR activity & set default configuration */ + for (i = 0; i < xor_chan_num; i++) { + mv_xor_command_set(i, MV_STOP); + mv_xor_ctrl_set(i, (1 << XEXCR_REG_ACC_PROTECT_OFFS) | + (4 << XEXCR_DST_BURST_LIMIT_OFFS) | + (4 << XEXCR_SRC_BURST_LIMIT_OFFS)); + } +} + +/* + * mv_xor_ctrl_set - Set XOR channel control registers + * + * DESCRIPTION: + * + * INPUT: + * + * OUTPUT: + * None. + * + * RETURN: + * MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise. + * NOTE: + * This function does not modify the Operation_mode field of control register. + */ +int mv_xor_ctrl_set(u32 chan, u32 xor_ctrl) +{ + u32 old_value; + + /* update the XOR Engine [0..1] Configuration Registers (XEx_c_r) */ + old_value = reg_read(XOR_CONFIG_REG(XOR_UNIT(chan), XOR_CHAN(chan))) & + XEXCR_OPERATION_MODE_MASK; + xor_ctrl &= ~XEXCR_OPERATION_MODE_MASK; + xor_ctrl |= old_value; + reg_write(XOR_CONFIG_REG(XOR_UNIT(chan), XOR_CHAN(chan)), xor_ctrl); + + return MV_OK; +} + +int mv_xor_mem_init(u32 chan, u32 start_ptr, u32 block_size, + u32 init_val_high, u32 init_val_low) +{ + u32 temp; + + /* Parameter checking */ + if (chan >= MV_XOR_MAX_CHAN) + return MV_BAD_PARAM; + + if (MV_ACTIVE == mv_xor_state_get(chan)) + return MV_BUSY; + + if ((block_size < XEXBSR_BLOCK_SIZE_MIN_VALUE) || + (block_size > XEXBSR_BLOCK_SIZE_MAX_VALUE)) + return MV_BAD_PARAM; + + /* set the operation mode to Memory Init */ + temp = reg_read(XOR_CONFIG_REG(XOR_UNIT(chan), XOR_CHAN(chan))); + temp &= ~XEXCR_OPERATION_MODE_MASK; + temp |= XEXCR_OPERATION_MODE_MEM_INIT; + reg_write(XOR_CONFIG_REG(XOR_UNIT(chan), XOR_CHAN(chan)), temp); + + /* + * update the start_ptr field in XOR Engine [0..1] Destination Pointer + * Register + */ + reg_write(XOR_DST_PTR_REG(XOR_UNIT(chan), XOR_CHAN(chan)), start_ptr); + + /* + * update the Block_size field in the XOR Engine[0..1] Block Size + * Registers + */ + reg_write(XOR_BLOCK_SIZE_REG(XOR_UNIT(chan), XOR_CHAN(chan)), + block_size); + + /* + * update the field Init_val_l in the XOR Engine Initial Value Register + * Low (XEIVRL) + */ + reg_write(XOR_INIT_VAL_LOW_REG(XOR_UNIT(chan)), init_val_low); + + /* + * update the field Init_val_h in the XOR Engine Initial Value Register + * High (XEIVRH) + */ + reg_write(XOR_INIT_VAL_HIGH_REG(XOR_UNIT(chan)), init_val_high); + + /* start transfer */ + reg_bit_set(XOR_ACTIVATION_REG(XOR_UNIT(chan), XOR_CHAN(chan)), + XEXACTR_XESTART_MASK); + + return MV_OK; +} + +/* + * mv_xor_state_get - Get XOR channel state. + * + * DESCRIPTION: + * XOR channel activity state can be active, idle, paused. + * This function retrunes the channel activity state. + * + * INPUT: + * chan - the channel number + * + * OUTPUT: + * None. + * + * RETURN: + * XOR_CHANNEL_IDLE - If the engine is idle. + * XOR_CHANNEL_ACTIVE - If the engine is busy. + * XOR_CHANNEL_PAUSED - If the engine is paused. + * MV_UNDEFINED_STATE - If the engine state is undefind or there is no + * such engine + */ +enum mv_state mv_xor_state_get(u32 chan) +{ + u32 state; + + /* Parameter checking */ + if (chan >= MV_XOR_MAX_CHAN) { + DB(printf("%s: ERR. Invalid chan num %d\n", __func__, chan)); + return MV_UNDEFINED_STATE; + } + + /* read the current state */ + state = reg_read(XOR_ACTIVATION_REG(XOR_UNIT(chan), XOR_CHAN(chan))); + state &= XEXACTR_XESTATUS_MASK; + + /* return the state */ + switch (state) { + case XEXACTR_XESTATUS_IDLE: + return MV_IDLE; + case XEXACTR_XESTATUS_ACTIVE: + return MV_ACTIVE; + case XEXACTR_XESTATUS_PAUSED: + return MV_PAUSED; + } + + return MV_UNDEFINED_STATE; +} + +/* + * mv_xor_command_set - Set command of XOR channel + * + * DESCRIPTION: + * XOR channel can be started, idle, paused and restarted. + * Paused can be set only if channel is active. + * Start can be set only if channel is idle or paused. + * Restart can be set only if channel is paused. + * Stop can be set only if channel is active. + * + * INPUT: + * chan - The channel number + * command - The command type (start, stop, restart, pause) + * + * OUTPUT: + * None. + * + * RETURN: + * MV_OK on success , MV_BAD_PARAM on erroneous parameter, MV_ERROR on + * undefind XOR engine mode + */ +int mv_xor_command_set(u32 chan, enum mv_command command) +{ + enum mv_state state; + + /* Parameter checking */ + if (chan >= MV_XOR_MAX_CHAN) { + DB(printf("%s: ERR. Invalid chan num %d\n", __func__, chan)); + return MV_BAD_PARAM; + } + + /* get the current state */ + state = mv_xor_state_get(chan); + + if ((command == MV_START) && (state == MV_IDLE)) { + /* command is start and current state is idle */ + reg_bit_set(XOR_ACTIVATION_REG + (XOR_UNIT(chan), XOR_CHAN(chan)), + XEXACTR_XESTART_MASK); + return MV_OK; + } else if ((command == MV_STOP) && (state == MV_ACTIVE)) { + /* command is stop and current state is active */ + reg_bit_set(XOR_ACTIVATION_REG + (XOR_UNIT(chan), XOR_CHAN(chan)), + XEXACTR_XESTOP_MASK); + return MV_OK; + } else if (((enum mv_state)command == MV_PAUSED) && + (state == MV_ACTIVE)) { + /* command is paused and current state is active */ + reg_bit_set(XOR_ACTIVATION_REG + (XOR_UNIT(chan), XOR_CHAN(chan)), + XEXACTR_XEPAUSE_MASK); + return MV_OK; + } else if ((command == MV_RESTART) && (state == MV_PAUSED)) { + /* command is restart and current state is paused */ + reg_bit_set(XOR_ACTIVATION_REG + (XOR_UNIT(chan), XOR_CHAN(chan)), + XEXACTR_XERESTART_MASK); + return MV_OK; + } else if ((command == MV_STOP) && (state == MV_IDLE)) { + /* command is stop and current state is active */ + return MV_OK; + } + + /* illegal command */ + DB(printf("%s: ERR. Illegal command\n", __func__)); + + return MV_BAD_PARAM; +} + +void ddr3_new_tip_ecc_scrub(void) +{ + u32 cs_c, max_cs; + u32 cs_ena = 0; + + printf("DDR3 Training Sequence - Start scrubbing\n"); + + max_cs = hws_ddr3_tip_max_cs_get(); + for (cs_c = 0; cs_c < max_cs; cs_c++) + cs_ena |= 1 << cs_c; + + mv_sys_xor_init(max_cs, cs_ena, 0x80000000, 0); + + mv_xor_mem_init(0, 0x00000000, 0x80000000, 0xdeadbeef, 0xdeadbeef); + /* wait for previous transfer completion */ + while (mv_xor_state_get(0) != MV_IDLE) + ; + + mv_xor_mem_init(0, 0x80000000, 0x40000000, 0xdeadbeef, 0xdeadbeef); + + /* wait for previous transfer completion */ + while (mv_xor_state_get(0) != MV_IDLE) + ; + + /* Return XOR State */ + mv_sys_xor_finish(); + + printf("DDR3 Training Sequence - End scrubbing\n"); +} diff --git a/drivers/ddr/marvell/a38x/xor.h b/drivers/ddr/marvell/a38x/xor.h new file mode 100644 index 0000000..7b1e316 --- /dev/null +++ b/drivers/ddr/marvell/a38x/xor.h @@ -0,0 +1,92 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _XOR_H +#define _XOR_H + +#define SRAM_BASE 0x40000000 + +#include "ddr3_hws_hw_training_def.h" + +#define MV_XOR_MAX_UNIT 2 /* XOR unit == XOR engine */ +#define MV_XOR_MAX_CHAN 4 /* total channels for all units */ +#define MV_XOR_MAX_CHAN_PER_UNIT 2 /* channels for units */ + +#define MV_IS_POWER_OF_2(num) (((num) != 0) && (((num) & ((num) - 1)) == 0)) + +/* + * This structure describes address space window. Window base can be + * 64 bit, window size up to 4GB + */ +struct addr_win { + u32 base_low; /* 32bit base low */ + u32 base_high; /* 32bit base high */ + u32 size; /* 32bit size */ +}; + +/* This structure describes SoC units address decode window */ +struct unit_win_info { + struct addr_win addr_win; /* An address window */ + int enable; /* Address decode window is enabled/disabled */ + u8 attrib; /* chip select attributes */ + u8 target_id; /* Target Id of this MV_TARGET */ +}; + +/* + * This enumerator describes the type of functionality the XOR channel + * can have while using the same data structures. + */ +enum xor_type { + MV_XOR, /* XOR channel functions as XOR accelerator */ + MV_DMA, /* XOR channel functions as IDMA channel */ + MV_CRC32 /* XOR channel functions as CRC 32 calculator */ +}; + +enum mv_state { + MV_IDLE, + MV_ACTIVE, + MV_PAUSED, + MV_UNDEFINED_STATE +}; + +/* + * This enumerator describes the set of commands that can be applied on + * an engine (e.g. IDMA, XOR). Appling a comman depends on the current + * status (see MV_STATE enumerator) + * + * Start can be applied only when status is IDLE + * Stop can be applied only when status is IDLE, ACTIVE or PAUSED + * Pause can be applied only when status is ACTIVE + * Restart can be applied only when status is PAUSED + */ +enum mv_command { + MV_START, /* Start */ + MV_STOP, /* Stop */ + MV_PAUSE, /* Pause */ + MV_RESTART /* Restart */ +}; + +enum xor_override_target { + SRC_ADDR0, /* Source Address #0 Control */ + SRC_ADDR1, /* Source Address #1 Control */ + SRC_ADDR2, /* Source Address #2 Control */ + SRC_ADDR3, /* Source Address #3 Control */ + SRC_ADDR4, /* Source Address #4 Control */ + SRC_ADDR5, /* Source Address #5 Control */ + SRC_ADDR6, /* Source Address #6 Control */ + SRC_ADDR7, /* Source Address #7 Control */ + XOR_DST_ADDR, /* Destination Address Control */ + XOR_NEXT_DESC /* Next Descriptor Address Control */ +}; + +enum mv_state mv_xor_state_get(u32 chan); +void mv_xor_hal_init(u32 xor_chan_num); +int mv_xor_ctrl_set(u32 chan, u32 xor_ctrl); +int mv_xor_command_set(u32 chan, enum mv_command command); +int mv_xor_override_set(u32 chan, enum xor_override_target target, u32 win_num, + int enable); + +#endif diff --git a/drivers/ddr/marvell/a38x/xor_regs.h b/drivers/ddr/marvell/a38x/xor_regs.h new file mode 100644 index 0000000..cc1546e --- /dev/null +++ b/drivers/ddr/marvell/a38x/xor_regs.h @@ -0,0 +1,236 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _XOR_REGS_h +#define _XOR_REGS_h + +/* + * For controllers that have two XOR units, then chans 2 & 3 will be + * mapped to channels 0 & 1 of unit 1 + */ +#define XOR_UNIT(chan) ((chan) >> 1) +#define XOR_CHAN(chan) ((chan) & 1) + +#define MV_XOR_REGS_OFFSET(unit) (0x60900) +#define MV_XOR_REGS_BASE(unit) (MV_XOR_REGS_OFFSET(unit)) + +/* XOR Engine Control Register Map */ +#define XOR_CHANNEL_ARBITER_REG(unit) (MV_XOR_REGS_BASE(unit)) +#define XOR_CONFIG_REG(unit, chan) (MV_XOR_REGS_BASE(unit) + \ + (0x10 + ((chan) * 4))) +#define XOR_ACTIVATION_REG(unit, chan) (MV_XOR_REGS_BASE(unit) + \ + (0x20 + ((chan) * 4))) + +/* XOR Engine Interrupt Register Map */ +#define XOR_CAUSE_REG(unit) (MV_XOR_REGS_BASE(unit)+(0x30)) +#define XOR_MASK_REG(unit) (MV_XOR_REGS_BASE(unit)+(0x40)) +#define XOR_ERROR_CAUSE_REG(unit) (MV_XOR_REGS_BASE(unit)+(0x50)) +#define XOR_ERROR_ADDR_REG(unit) (MV_XOR_REGS_BASE(unit)+(0x60)) + +/* XOR Engine Descriptor Register Map */ +#define XOR_NEXT_DESC_PTR_REG(unit, chan) (MV_XOR_REGS_BASE(unit) + \ + (0x200 + ((chan) * 4))) +#define XOR_CURR_DESC_PTR_REG(unit, chan) (MV_XOR_REGS_BASE(unit) + \ + (0x210 + ((chan) * 4))) +#define XOR_BYTE_COUNT_REG(unit, chan) (MV_XOR_REGS_BASE(unit) + \ + (0x220 + ((chan) * 4))) + +/* XOR Engine ECC/Mem_init Register Map */ +#define XOR_DST_PTR_REG(unit, chan) (MV_XOR_REGS_BASE(unit) + \ + (0x2b0 + ((chan) * 4))) +#define XOR_BLOCK_SIZE_REG(unit, chan) (MV_XOR_REGS_BASE(unit) + \ + (0x2c0 + ((chan) * 4))) +#define XOR_TIMER_MODE_CTRL_REG(unit) (MV_XOR_REGS_BASE(unit) + (0x2d0)) +#define XOR_TIMER_MODE_INIT_VAL_REG(unit) (MV_XOR_REGS_BASE(unit) + (0x2d4)) +#define XOR_TIMER_MODE_CURR_VAL_REG(unit) (MV_XOR_REGS_BASE(unit) + (0x2d8)) +#define XOR_INIT_VAL_LOW_REG(unit) (MV_XOR_REGS_BASE(unit) + (0x2e0)) +#define XOR_INIT_VAL_HIGH_REG(unit) (MV_XOR_REGS_BASE(unit) + (0x2e4)) + +/* XOR Engine Debug Register Map */ +#define XOR_DEBUG_REG(unit) (MV_XOR_REGS_BASE(unit) + (0x70)) + +/* XOR register fileds */ + +/* XOR Engine Channel Arbiter Register */ +#define XECAR_SLICE_OFFS(slice_num) (slice_num) +#define XECAR_SLICE_MASK(slice_num) (1 << (XECAR_SLICE_OFFS(slice_num))) + +/* XOR Engine [0..1] Configuration Registers */ +#define XEXCR_OPERATION_MODE_OFFS (0) +#define XEXCR_OPERATION_MODE_MASK (7 << XEXCR_OPERATION_MODE_OFFS) +#define XEXCR_OPERATION_MODE_XOR (0 << XEXCR_OPERATION_MODE_OFFS) +#define XEXCR_OPERATION_MODE_CRC (1 << XEXCR_OPERATION_MODE_OFFS) +#define XEXCR_OPERATION_MODE_DMA (2 << XEXCR_OPERATION_MODE_OFFS) +#define XEXCR_OPERATION_MODE_ECC (3 << XEXCR_OPERATION_MODE_OFFS) +#define XEXCR_OPERATION_MODE_MEM_INIT (4 << XEXCR_OPERATION_MODE_OFFS) + +#define XEXCR_SRC_BURST_LIMIT_OFFS (4) +#define XEXCR_SRC_BURST_LIMIT_MASK (7 << XEXCR_SRC_BURST_LIMIT_OFFS) +#define XEXCR_DST_BURST_LIMIT_OFFS (8) +#define XEXCR_DST_BURST_LIMIT_MASK (7 << XEXCR_DST_BURST_LIMIT_OFFS) +#define XEXCR_DRD_RES_SWP_OFFS (12) +#define XEXCR_DRD_RES_SWP_MASK (1 << XEXCR_DRD_RES_SWP_OFFS) +#define XEXCR_DWR_REQ_SWP_OFFS (13) +#define XEXCR_DWR_REQ_SWP_MASK (1 << XEXCR_DWR_REQ_SWP_OFFS) +#define XEXCR_DES_SWP_OFFS (14) +#define XEXCR_DES_SWP_MASK (1 << XEXCR_DES_SWP_OFFS) +#define XEXCR_REG_ACC_PROTECT_OFFS (15) +#define XEXCR_REG_ACC_PROTECT_MASK (1 << XEXCR_REG_ACC_PROTECT_OFFS) + +/* XOR Engine [0..1] Activation Registers */ +#define XEXACTR_XESTART_OFFS (0) +#define XEXACTR_XESTART_MASK (1 << XEXACTR_XESTART_OFFS) +#define XEXACTR_XESTOP_OFFS (1) +#define XEXACTR_XESTOP_MASK (1 << XEXACTR_XESTOP_OFFS) +#define XEXACTR_XEPAUSE_OFFS (2) +#define XEXACTR_XEPAUSE_MASK (1 << XEXACTR_XEPAUSE_OFFS) +#define XEXACTR_XERESTART_OFFS (3) +#define XEXACTR_XERESTART_MASK (1 << XEXACTR_XERESTART_OFFS) +#define XEXACTR_XESTATUS_OFFS (4) +#define XEXACTR_XESTATUS_MASK (3 << XEXACTR_XESTATUS_OFFS) +#define XEXACTR_XESTATUS_IDLE (0 << XEXACTR_XESTATUS_OFFS) +#define XEXACTR_XESTATUS_ACTIVE (1 << XEXACTR_XESTATUS_OFFS) +#define XEXACTR_XESTATUS_PAUSED (2 << XEXACTR_XESTATUS_OFFS) + +/* XOR Engine Interrupt Cause Register (XEICR) */ +#define XEICR_CHAN_OFFS 16 +#define XEICR_CAUSE_OFFS(chan) (chan * XEICR_CHAN_OFFS) +#define XEICR_CAUSE_MASK(chan, cause) (1 << (cause + XEICR_CAUSE_OFFS(chan))) +#define XEICR_COMP_MASK_ALL 0x000f000f +#define XEICR_COMP_MASK(chan) (0x000f << XEICR_CAUSE_OFFS(chan)) +#define XEICR_ERR_MASK 0x03800380 + +/* XOR Engine Error Cause Register (XEECR) */ +#define XEECR_ERR_TYPE_OFFS 0 +#define XEECR_ERR_TYPE_MASK (0x1f << XEECR_ERR_TYPE_OFFS) + +/* XOR Engine Error Address Register (XEEAR) */ +#define XEEAR_ERR_ADDR_OFFS (0) +#define XEEAR_ERR_ADDR_MASK (0xffffffff << XEEAR_ERR_ADDR_OFFS) + +/* XOR Engine [0..1] Next Descriptor Pointer Register */ +#define XEXNDPR_NEXT_DESC_PTR_OFFS (0) +#define XEXNDPR_NEXT_DESC_PTR_MASK (0xffffffff << \ + XEXNDPR_NEXT_DESC_PTR_OFFS) + +/* XOR Engine [0..1] Current Descriptor Pointer Register */ +#define XEXCDPR_CURRENT_DESC_PTR_OFFS (0) +#define XEXCDPR_CURRENT_DESC_PTR_MASK (0xffffffff << \ + XEXCDPR_CURRENT_DESC_PTR_OFFS) + +/* XOR Engine [0..1] Byte Count Register */ +#define XEXBCR_BYTE_CNT_OFFS (0) +#define XEXBCR_BYTE_CNT_MASK (0xffffffff << XEXBCR_BYTE_CNT_OFFS) + +/* XOR Engine [0..1] Destination Pointer Register */ +#define XEXDPR_DST_PTR_OFFS (0) +#define XEXDPR_DST_PTR_MASK (0xffffffff << XEXDPR_DST_PTR_OFFS) +#define XEXDPR_DST_PTR_XOR_MASK (0x3f) +#define XEXDPR_DST_PTR_DMA_MASK (0x1f) +#define XEXDPR_DST_PTR_CRC_MASK (0x1f) + +/* XOR Engine[0..1] Block Size Registers */ +#define XEXBSR_BLOCK_SIZE_OFFS (0) +#define XEXBSR_BLOCK_SIZE_MASK (0xffffffff << XEXBSR_BLOCK_SIZE_OFFS) +#define XEXBSR_BLOCK_SIZE_MIN_VALUE (128) +#define XEXBSR_BLOCK_SIZE_MAX_VALUE (0xffffffff) + +/* XOR Engine Timer Mode Control Register (XETMCR) */ +#define XETMCR_TIMER_EN_OFFS (0) +#define XETMCR_TIMER_EN_MASK (1 << XETMCR_TIMER_EN_OFFS) +#define XETMCR_TIMER_EN_ENABLE (1 << XETMCR_TIMER_EN_OFFS) +#define XETMCR_TIMER_EN_DISABLE (0 << XETMCR_TIMER_EN_OFFS) +#define XETMCR_SECTION_SIZE_CTRL_OFFS (8) +#define XETMCR_SECTION_SIZE_CTRL_MASK (0x1f << XETMCR_SECTION_SIZE_CTRL_OFFS) +#define XETMCR_SECTION_SIZE_MIN_VALUE (7) +#define XETMCR_SECTION_SIZE_MAX_VALUE (31) + +/* XOR Engine Timer Mode Initial Value Register (XETMIVR) */ +#define XETMIVR_TIMER_INIT_VAL_OFFS (0) +#define XETMIVR_TIMER_INIT_VAL_MASK (0xffffffff << \ + XETMIVR_TIMER_INIT_VAL_OFFS) + +/* XOR Engine Timer Mode Current Value Register (XETMCVR) */ +#define XETMCVR_TIMER_CRNT_VAL_OFFS (0) +#define XETMCVR_TIMER_CRNT_VAL_MASK (0xffffffff << \ + XETMCVR_TIMER_CRNT_VAL_OFFS) + +/* XOR Engine Initial Value Register Low (XEIVRL) */ +#define XEIVRL_INIT_VAL_L_OFFS (0) +#define XEIVRL_INIT_VAL_L_MASK (0xffffffff << XEIVRL_INIT_VAL_L_OFFS) + +/* XOR Engine Initial Value Register High (XEIVRH) */ +#define XEIVRH_INIT_VAL_H_OFFS (0) +#define XEIVRH_INIT_VAL_H_MASK (0xffffffff << XEIVRH_INIT_VAL_H_OFFS) + +/* XOR Engine Debug Register (XEDBR) */ +#define XEDBR_PARITY_ERR_INSR_OFFS (0) +#define XEDBR_PARITY_ERR_INSR_MASK (1 << XEDBR_PARITY_ERR_INSR_OFFS) +#define XEDBR_XBAR_ERR_INSR_OFFS (1) +#define XEDBR_XBAR_ERR_INSR_MASK (1 << XEDBR_XBAR_ERR_INSR_OFFS) + +/* XOR Engine address decode registers. */ +/* Maximum address decode windows */ +#define XOR_MAX_ADDR_DEC_WIN 8 +/* Maximum address arbiter windows */ +#define XOR_MAX_REMAP_WIN 4 + +/* XOR Engine Address Decoding Register Map */ +#define XOR_WINDOW_CTRL_REG(unit, chan) (MV_XOR_REGS_BASE(unit) + \ + (0x240 + ((chan) * 4))) +#define XOR_BASE_ADDR_REG(unit, win_num) (MV_XOR_REGS_BASE(unit) + \ + (0x250 + ((win_num) * 4))) +#define XOR_SIZE_MASK_REG(unit, win_num) (MV_XOR_REGS_BASE(unit) + \ + (0x270 + ((win_num) * 4))) +#define XOR_HIGH_ADDR_REMAP_REG(unit, win_num) (MV_XOR_REGS_BASE(unit) + \ + (0x290 + ((win_num) * 4))) +#define XOR_ADDR_OVRD_REG(unit, win_num) (MV_XOR_REGS_BASE(unit) + \ + (0x2a0 + ((win_num) * 4))) + +/* XOR Engine [0..1] Window Control Registers */ +#define XEXWCR_WIN_EN_OFFS(win_num) (win_num) +#define XEXWCR_WIN_EN_MASK(win_num) (1 << (XEXWCR_WIN_EN_OFFS(win_num))) +#define XEXWCR_WIN_EN_ENABLE(win_num) (1 << (XEXWCR_WIN_EN_OFFS(win_num))) +#define XEXWCR_WIN_EN_DISABLE(win_num) (0 << (XEXWCR_WIN_EN_OFFS(win_num))) + +#define XEXWCR_WIN_ACC_OFFS(win_num) ((2 * win_num) + 16) +#define XEXWCR_WIN_ACC_MASK(win_num) (3 << (XEXWCR_WIN_ACC_OFFS(win_num))) +#define XEXWCR_WIN_ACC_NO_ACC(win_num) (0 << (XEXWCR_WIN_ACC_OFFS(win_num))) +#define XEXWCR_WIN_ACC_RO(win_num) (1 << (XEXWCR_WIN_ACC_OFFS(win_num))) +#define XEXWCR_WIN_ACC_RW(win_num) (3 << (XEXWCR_WIN_ACC_OFFS(win_num))) + +/* XOR Engine Base Address Registers (XEBARx) */ +#define XEBARX_TARGET_OFFS (0) +#define XEBARX_TARGET_MASK (0xf << XEBARX_TARGET_OFFS) +#define XEBARX_ATTR_OFFS (8) +#define XEBARX_ATTR_MASK (0xff << XEBARX_ATTR_OFFS) +#define XEBARX_BASE_OFFS (16) +#define XEBARX_BASE_MASK (0xffff << XEBARX_BASE_OFFS) + +/* XOR Engine Size Mask Registers (XESMRx) */ +#define XESMRX_SIZE_MASK_OFFS (16) +#define XESMRX_SIZE_MASK_MASK (0xffff << XESMRX_SIZE_MASK_OFFS) +#define XOR_WIN_SIZE_ALIGN _64K + +/* XOR Engine High Address Remap Register (XEHARRx1) */ +#define XEHARRX_REMAP_OFFS (0) +#define XEHARRX_REMAP_MASK (0xffffffff << XEHARRX_REMAP_OFFS) + +#define XOR_OVERRIDE_CTRL_REG(chan) (MV_XOR_REGS_BASE(XOR_UNIT(chan)) + \ + (0x2a0 + ((XOR_CHAN(chan)) * 4))) + +/* XOR Engine [0..1] Address Override Control Register */ +#define XEXAOCR_OVR_EN_OFFS(target) (3 * target) +#define XEXAOCR_OVR_EN_MASK(target) (1 << (XEXAOCR_OVR_EN_OFFS(target))) +#define XEXAOCR_OVR_PTR_OFFS(target) ((3 * target) + 1) +#define XEXAOCR_OVR_PTR_MASK(target) (3 << (XEXAOCR_OVR_PTR_OFFS(target))) +#define XEXAOCR_OVR_BAR(win_num, target) (win_num << \ + (XEXAOCR_OVR_PTR_OFFS(target))) + +/* Maximum address override windows */ +#define XOR_MAX_OVERRIDE_WIN 4 + +#endif /* _XOR_REGS_h */ diff --git a/drivers/ddr/mvebu/Makefile b/drivers/ddr/marvell/axp/Makefile index 50a69ea..50a69ea 100644 --- a/drivers/ddr/mvebu/Makefile +++ b/drivers/ddr/marvell/axp/Makefile diff --git a/drivers/ddr/mvebu/ddr3_axp.h b/drivers/ddr/marvell/axp/ddr3_axp.h index d9e33f7..d9e33f7 100644 --- a/drivers/ddr/mvebu/ddr3_axp.h +++ b/drivers/ddr/marvell/axp/ddr3_axp.h diff --git a/drivers/ddr/mvebu/ddr3_axp_config.h b/drivers/ddr/marvell/axp/ddr3_axp_config.h index 800d2d1..800d2d1 100644 --- a/drivers/ddr/mvebu/ddr3_axp_config.h +++ b/drivers/ddr/marvell/axp/ddr3_axp_config.h diff --git a/drivers/ddr/mvebu/ddr3_axp_mc_static.h b/drivers/ddr/marvell/axp/ddr3_axp_mc_static.h index 2c0e9075..2c0e9075 100644 --- a/drivers/ddr/mvebu/ddr3_axp_mc_static.h +++ b/drivers/ddr/marvell/axp/ddr3_axp_mc_static.h diff --git a/drivers/ddr/mvebu/ddr3_axp_training_static.h b/drivers/ddr/marvell/axp/ddr3_axp_training_static.h index 4e61547..4e61547 100644 --- a/drivers/ddr/mvebu/ddr3_axp_training_static.h +++ b/drivers/ddr/marvell/axp/ddr3_axp_training_static.h diff --git a/drivers/ddr/mvebu/ddr3_axp_vars.h b/drivers/ddr/marvell/axp/ddr3_axp_vars.h index 1b0ab56..1b0ab56 100644 --- a/drivers/ddr/mvebu/ddr3_axp_vars.h +++ b/drivers/ddr/marvell/axp/ddr3_axp_vars.h diff --git a/drivers/ddr/mvebu/ddr3_dfs.c b/drivers/ddr/marvell/axp/ddr3_dfs.c index 9347773..9347773 100644 --- a/drivers/ddr/mvebu/ddr3_dfs.c +++ b/drivers/ddr/marvell/axp/ddr3_dfs.c diff --git a/drivers/ddr/mvebu/ddr3_dqs.c b/drivers/ddr/marvell/axp/ddr3_dqs.c index 71a986d..71a986d 100644 --- a/drivers/ddr/mvebu/ddr3_dqs.c +++ b/drivers/ddr/marvell/axp/ddr3_dqs.c diff --git a/drivers/ddr/mvebu/ddr3_hw_training.c b/drivers/ddr/marvell/axp/ddr3_hw_training.c index a8c5e6a..a8c5e6a 100644 --- a/drivers/ddr/mvebu/ddr3_hw_training.c +++ b/drivers/ddr/marvell/axp/ddr3_hw_training.c diff --git a/drivers/ddr/mvebu/ddr3_hw_training.h b/drivers/ddr/marvell/axp/ddr3_hw_training.h index cffa7c4..cffa7c4 100644 --- a/drivers/ddr/mvebu/ddr3_hw_training.h +++ b/drivers/ddr/marvell/axp/ddr3_hw_training.h diff --git a/drivers/ddr/mvebu/ddr3_init.c b/drivers/ddr/marvell/axp/ddr3_init.c index 11b8591..11b8591 100644 --- a/drivers/ddr/mvebu/ddr3_init.c +++ b/drivers/ddr/marvell/axp/ddr3_init.c diff --git a/drivers/ddr/mvebu/ddr3_init.h b/drivers/ddr/marvell/axp/ddr3_init.h index b259e09..b259e09 100644 --- a/drivers/ddr/mvebu/ddr3_init.h +++ b/drivers/ddr/marvell/axp/ddr3_init.h diff --git a/drivers/ddr/mvebu/ddr3_patterns_64bit.h b/drivers/ddr/marvell/axp/ddr3_patterns_64bit.h index 1b57328..1b57328 100644 --- a/drivers/ddr/mvebu/ddr3_patterns_64bit.h +++ b/drivers/ddr/marvell/axp/ddr3_patterns_64bit.h diff --git a/drivers/ddr/mvebu/ddr3_pbs.c b/drivers/ddr/marvell/axp/ddr3_pbs.c index 00ea3fd..00ea3fd 100644 --- a/drivers/ddr/mvebu/ddr3_pbs.c +++ b/drivers/ddr/marvell/axp/ddr3_pbs.c diff --git a/drivers/ddr/mvebu/ddr3_read_leveling.c b/drivers/ddr/marvell/axp/ddr3_read_leveling.c index 4662bde..4662bde 100644 --- a/drivers/ddr/mvebu/ddr3_read_leveling.c +++ b/drivers/ddr/marvell/axp/ddr3_read_leveling.c diff --git a/drivers/ddr/mvebu/ddr3_sdram.c b/drivers/ddr/marvell/axp/ddr3_sdram.c index 50c1bf8..50c1bf8 100644 --- a/drivers/ddr/mvebu/ddr3_sdram.c +++ b/drivers/ddr/marvell/axp/ddr3_sdram.c diff --git a/drivers/ddr/mvebu/ddr3_spd.c b/drivers/ddr/marvell/axp/ddr3_spd.c index f4f94c5..f4f94c5 100644 --- a/drivers/ddr/mvebu/ddr3_spd.c +++ b/drivers/ddr/marvell/axp/ddr3_spd.c diff --git a/drivers/ddr/mvebu/ddr3_write_leveling.c b/drivers/ddr/marvell/axp/ddr3_write_leveling.c index df3a3df..df3a3df 100644 --- a/drivers/ddr/mvebu/ddr3_write_leveling.c +++ b/drivers/ddr/marvell/axp/ddr3_write_leveling.c diff --git a/drivers/ddr/mvebu/xor.c b/drivers/ddr/marvell/axp/xor.c index 66c96ae..66c96ae 100644 --- a/drivers/ddr/mvebu/xor.c +++ b/drivers/ddr/marvell/axp/xor.c diff --git a/drivers/ddr/mvebu/xor.h b/drivers/ddr/marvell/axp/xor.h index 3536487..3536487 100644 --- a/drivers/ddr/mvebu/xor.h +++ b/drivers/ddr/marvell/axp/xor.h diff --git a/drivers/ddr/mvebu/xor_regs.h b/drivers/ddr/marvell/axp/xor_regs.h index 884aa15..884aa15 100644 --- a/drivers/ddr/mvebu/xor_regs.h +++ b/drivers/ddr/marvell/axp/xor_regs.h diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile index 5cc535e..cebea30 100644 --- a/drivers/dfu/Makefile +++ b/drivers/dfu/Makefile @@ -5,7 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_DFU_FUNCTION) += dfu.o +obj-$(CONFIG_USB_FUNCTION_DFU) += dfu.o obj-$(CONFIG_DFU_MMC) += dfu_mmc.o obj-$(CONFIG_DFU_NAND) += dfu_nand.o obj-$(CONFIG_DFU_RAM) += dfu_ram.o diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index 0560afa..675162d 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -198,9 +198,9 @@ int dfu_write(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num) { int ret; - debug("%s: name: %s buf: 0x%p size: 0x%x p_num: 0x%x offset: 0x%llx bufoffset: 0x%x\n", + debug("%s: name: %s buf: 0x%p size: 0x%x p_num: 0x%x offset: 0x%llx bufoffset: 0x%lx\n", __func__, dfu->name, buf, size, blk_seq_num, dfu->offset, - dfu->i_buf - dfu->i_buf_start); + (unsigned long)(dfu->i_buf - dfu->i_buf_start)); if (!dfu->inited) { /* initial state */ diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c index fd865e1..2a780f7 100644 --- a/drivers/dfu/dfu_mmc.c +++ b/drivers/dfu/dfu_mmc.c @@ -156,7 +156,7 @@ static int mmc_file_op(enum dfu_op op, struct dfu_entity *dfu, dfu->data.mmc.dev, dfu->data.mmc.part); if (op != DFU_OP_SIZE) - sprintf(cmd_buf + strlen(cmd_buf), " 0x%x", (unsigned int)buf); + sprintf(cmd_buf + strlen(cmd_buf), " %p", buf); sprintf(cmd_buf + strlen(cmd_buf), " %s", dfu->name); diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 5864850..67c6374 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -6,13 +6,9 @@ # ifndef CONFIG_SPL_BUILD -obj-$(CONFIG_DM_GPIO) += gpio-uclass.o obj-$(CONFIG_AXP_GPIO) += axp_gpio.o endif -/* TODO(sjg@chromium.org): Only tegra supports driver model in SPL */ -ifdef CONFIG_TEGRA_GPIO obj-$(CONFIG_DM_GPIO) += gpio-uclass.o -endif obj-$(CONFIG_AT91_GPIO) += at91_gpio.o obj-$(CONFIG_INTEL_ICH6_GPIO) += intel_ich6_gpio.o diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c index bf982b9..4efda31 100644 --- a/drivers/gpio/gpio-uclass.c +++ b/drivers/gpio/gpio-uclass.c @@ -48,8 +48,7 @@ static int gpio_to_device(unsigned int gpio, struct gpio_desc *desc) return ret ? ret : -ENOENT; } -int gpio_lookup_name(const char *name, struct udevice **devp, - unsigned int *offsetp, unsigned int *gpiop) +int dm_gpio_lookup_name(const char *name, struct gpio_desc *desc) { struct gpio_dev_priv *uc_priv = NULL; struct udevice *dev; @@ -57,8 +56,6 @@ int gpio_lookup_name(const char *name, struct udevice **devp, int numeric; int ret; - if (devp) - *devp = NULL; numeric = isdigit(*name) ? simple_strtoul(name, NULL, 10) : -1; for (ret = uclass_first_device(UCLASS_GPIO, &dev); dev; @@ -84,12 +81,33 @@ int gpio_lookup_name(const char *name, struct udevice **devp, if (!dev) return ret ? ret : -EINVAL; + desc->dev = dev; + desc->offset = offset; + + return 0; +} + +int gpio_lookup_name(const char *name, struct udevice **devp, + unsigned int *offsetp, unsigned int *gpiop) +{ + struct gpio_desc desc; + int ret; + + if (devp) + *devp = NULL; + ret = dm_gpio_lookup_name(name, &desc); + if (ret) + return ret; + if (devp) - *devp = dev; + *devp = desc.dev; if (offsetp) - *offsetp = offset; - if (gpiop) - *gpiop = uc_priv->gpio_base + offset; + *offsetp = desc.offset; + if (gpiop) { + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(desc.dev); + + *gpiop = uc_priv->gpio_base + desc.offset; + } return 0; } @@ -109,7 +127,7 @@ static int gpio_find_and_xlate(struct gpio_desc *desc, return ops->xlate ? ops->xlate(desc->dev, desc, args) : 0; } -static int dm_gpio_request(struct gpio_desc *desc, const char *label) +int dm_gpio_request(struct gpio_desc *desc, const char *label) { struct udevice *dev = desc->dev; struct gpio_dev_priv *uc_priv; diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c index fc95646..a428978 100644 --- a/drivers/i2c/tegra_i2c.c +++ b/drivers/i2c/tegra_i2c.c @@ -235,7 +235,7 @@ static int send_recv_packets(struct i2c_bus *i2c_bus, if ((words == 1) && last_bytes) { local = 0; memcpy(&local, dptr, last_bytes); - } else if ((unsigned)dptr & 3) { + } else if ((unsigned long)dptr & 3) { memcpy(&local, dptr, sizeof(u32)); } else { local = *wptr; @@ -258,7 +258,7 @@ static int send_recv_packets(struct i2c_bus *i2c_bus, local = readl(&control->rx_fifo); if ((words == 1) && last_bytes) memcpy(dptr, (char *)&local, last_bytes); - else if ((unsigned)dptr & 3) + else if ((unsigned long)dptr & 3) memcpy(dptr, &local, sizeof(u32)); else *wptr = local; diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig new file mode 100644 index 0000000..de5feea --- /dev/null +++ b/drivers/led/Kconfig @@ -0,0 +1,26 @@ +config LED + bool "Enable LED support" + depends on DM + help + Many boards have LEDs which can be used to signal status or alerts. + U-Boot provides a uclass API to implement this feature. LED drivers + can provide access to board-specific LEDs. Use of the device tree + for configuration is encouraged. + +config SPL_LED_SUPPORT + bool "Enable LED support in SPL" + depends on LED + help + The LED subsystem adds a small amount of overhead to the image. + If this is acceptable and you have a need to use LEDs in SPL, + enable this option. You will need to enable device tree in SPL + for this to work. + +config LED_GPIO + bool "LED support for GPIO-connected LEDs" + depends on LED && DM_GPIO + help + Enable support for LEDs which are connected to GPIO lines. These + GPIOs may be on the SoC or some other device which provides GPIOs. + The GPIO driver must used driver model. LEDs are configured using + the device tree. diff --git a/drivers/led/Makefile b/drivers/led/Makefile new file mode 100644 index 0000000..990129e --- /dev/null +++ b/drivers/led/Makefile @@ -0,0 +1,9 @@ +# +# Copyright (c) 2015 Google, Inc +# Written by Simon Glass <sjg@chromium.org> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_LED) += led-uclass.o +obj-$(CONFIG_LED_GPIO) += led_gpio.o diff --git a/drivers/led/led-uclass.c b/drivers/led/led-uclass.c new file mode 100644 index 0000000..784ac87 --- /dev/null +++ b/drivers/led/led-uclass.c @@ -0,0 +1,49 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <led.h> +#include <dm/root.h> +#include <dm/uclass-internal.h> + +int led_get_by_label(const char *label, struct udevice **devp) +{ + struct udevice *dev; + struct uclass *uc; + int ret; + + ret = uclass_get(UCLASS_LED, &uc); + if (ret) + return ret; + uclass_foreach_dev(dev, uc) { + struct led_uclass_plat *uc_plat = dev_get_uclass_platdata(dev); + + /* Ignore the top-level LED node */ + if (uc_plat->label && !strcmp(label, uc_plat->label)) + return uclass_get_device_tail(dev, 0, devp); + } + + return -ENODEV; +} + +int led_set_on(struct udevice *dev, int on) +{ + struct led_ops *ops = led_get_ops(dev); + + if (!ops->set_on) + return -ENOSYS; + + return ops->set_on(dev, on); +} + +UCLASS_DRIVER(led) = { + .id = UCLASS_LED, + .name = "led", + .per_device_platdata_auto_alloc_size = sizeof(struct led_uclass_plat), +}; diff --git a/drivers/led/led_gpio.c b/drivers/led/led_gpio.c new file mode 100644 index 0000000..cb6e996 --- /dev/null +++ b/drivers/led/led_gpio.c @@ -0,0 +1,107 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <led.h> +#include <asm/gpio.h> +#include <dm/lists.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct led_gpio_priv { + struct gpio_desc gpio; +}; + +static int gpio_led_set_on(struct udevice *dev, int on) +{ + struct led_gpio_priv *priv = dev_get_priv(dev); + + if (!dm_gpio_is_valid(&priv->gpio)) + return -EREMOTEIO; + + return dm_gpio_set_value(&priv->gpio, on); +} + +static int led_gpio_probe(struct udevice *dev) +{ + struct led_uclass_plat *uc_plat = dev_get_uclass_platdata(dev); + struct led_gpio_priv *priv = dev_get_priv(dev); + + /* Ignore the top-level LED node */ + if (!uc_plat->label) + return 0; + return gpio_request_by_name(dev, "gpios", 0, &priv->gpio, GPIOD_IS_OUT); +} + +static int led_gpio_remove(struct udevice *dev) +{ + /* + * The GPIO driver may have already been removed. We will need to + * address this more generally. + */ +#ifndef CONFIG_SANDBOX + struct led_gpio_priv *priv = dev_get_priv(dev); + + if (dm_gpio_is_valid(&priv->gpio)) + dm_gpio_free(dev, &priv->gpio); +#endif + + return 0; +} + +static int led_gpio_bind(struct udevice *parent) +{ + const void *blob = gd->fdt_blob; + struct udevice *dev; + int node; + int ret; + + for (node = fdt_first_subnode(blob, parent->of_offset); + node > 0; + node = fdt_next_subnode(blob, node)) { + struct led_uclass_plat *uc_plat; + const char *label; + + label = fdt_getprop(blob, node, "label", NULL); + if (!label) { + debug("%s: node %s has no label\n", __func__, + fdt_get_name(blob, node, NULL)); + return -EINVAL; + } + ret = device_bind_driver_to_node(parent, "gpio_led", + fdt_get_name(blob, node, NULL), + node, &dev); + if (ret) + return ret; + uc_plat = dev_get_uclass_platdata(dev); + uc_plat->label = label; + } + + return 0; +} + +static const struct led_ops gpio_led_ops = { + .set_on = gpio_led_set_on, +}; + +static const struct udevice_id led_gpio_ids[] = { + { .compatible = "gpio-leds" }, + { } +}; + +U_BOOT_DRIVER(led_gpio) = { + .name = "gpio_led", + .id = UCLASS_LED, + .of_match = led_gpio_ids, + .ops = &gpio_led_ops, + .priv_auto_alloc_size = sizeof(struct led_gpio_priv), + .bind = led_gpio_bind, + .probe = led_gpio_probe, + .remove = led_gpio_remove, +}; diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 64b07a3..3b7f76a 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -73,3 +73,12 @@ config PCA9551_I2C_ADDR default 0x60 help The I2C address of the PCA9551 LED controller. + +config RESET + bool "Enable support for reset drivers" + depends on DM + help + Enable reset drivers which can be used to reset the CPU or board. + Each driver can provide a reset method which will be called to + effect a reset. The uclass will try all available drivers when + reset_walk() is called. diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 120babc..5218b91 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -22,13 +22,16 @@ obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o obj-$(CONFIG_NS87308) += ns87308.o obj-$(CONFIG_PDSP188x) += pdsp188x.o +obj-$(CONFIG_SANDBOX) += reset_sandbox.o ifdef CONFIG_DM_I2C obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o endif obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o obj-$(CONFIG_STATUS_LED) += status_led.o obj-$(CONFIG_SANDBOX) += swap_case.o +obj-$(CONFIG_SANDBOX) += syscon_sandbox.o obj-$(CONFIG_TWL4030_LED) += twl4030_led.o obj-$(CONFIG_FSL_IFC) += fsl_ifc.o obj-$(CONFIG_FSL_SEC_MON) += fsl_sec_mon.o obj-$(CONFIG_PCA9551_LED) += pca9551_led.o +obj-$(CONFIG_RESET) += reset-uclass.o diff --git a/drivers/misc/fsl_debug_server.c b/drivers/misc/fsl_debug_server.c index e080fe6..44cd9b9 100644 --- a/drivers/misc/fsl_debug_server.c +++ b/drivers/misc/fsl_debug_server.c @@ -10,6 +10,7 @@ #include <asm/system.h> #include <asm/arch-fsl-lsch3/immap_lsch3.h> +#include <fsl-mc/fsl_mc.h> #include <fsl_debug_server.h> DECLARE_GLOBAL_DATA_PTR; @@ -151,6 +152,10 @@ int debug_server_init(void) debug_server_ram_addr = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; +#ifdef CONFIG_FSL_MC_ENET + debug_server_ram_addr += mc_get_dram_block_size(); +#endif + error = debug_server_parse_firmware_fit_image(&raw_image_addr, &raw_image_size); if (error != 0) diff --git a/drivers/misc/pca9551_led.c b/drivers/misc/pca9551_led.c index 79b1e20..d4034f6 100644 --- a/drivers/misc/pca9551_led.c +++ b/drivers/misc/pca9551_led.c @@ -32,7 +32,10 @@ struct pca9551_blink_rate { u8 pwm; /* Pulse width modulation, see PCA9551_7.pdf p. 6 */ }; -static int freq0, freq1; +static int freq_last = -1; +static int mask_last = -1; +static int idx_last = -1; +static int mode_last; static int pca9551_led_get_state(int led, int *state) { @@ -135,21 +138,30 @@ void __led_blink(led_id_t mask, int freq) { struct pca9551_blink_rate rate; int mode; - int blink; + int idx; - if ((freq0 == 0) || (freq == freq0)) { - blink = 0; - mode = PCA9551_LED_STATE_BLINK0; - freq0 = freq; + if ((freq == freq_last) || (mask == mask_last)) { + idx = idx_last; + mode = mode_last; } else { - blink = 1; - mode = PCA9551_LED_STATE_BLINK1; - freq1 = freq; + /* Toggle blink index */ + if (idx_last == 0) { + idx = 1; + mode = PCA9551_LED_STATE_BLINK1; + } else { + idx = 0; + mode = PCA9551_LED_STATE_BLINK0; + } + + idx_last = idx; + mode_last = mode; } + freq_last = freq; + mask_last = mask; rate.psc = ((freq * 38) / 1000) - 1; rate.pwm = 128; /* 50% duty cycle */ - pca9551_led_set_blink_rate(blink, rate); + pca9551_led_set_blink_rate(idx, rate); pca9551_led_set_state(mask, mode); } diff --git a/drivers/misc/reset-uclass.c b/drivers/misc/reset-uclass.c new file mode 100644 index 0000000..fdb5c6f --- /dev/null +++ b/drivers/misc/reset-uclass.c @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <reset.h> +#include <dm.h> +#include <errno.h> +#include <regmap.h> +#include <dm/device-internal.h> +#include <dm/lists.h> +#include <dm/root.h> +#include <linux/err.h> + +int reset_request(struct udevice *dev, enum reset_t type) +{ + struct reset_ops *ops = reset_get_ops(dev); + + if (!ops->request) + return -ENOSYS; + + return ops->request(dev, type); +} + +int reset_walk(enum reset_t type) +{ + struct udevice *dev; + int ret = -ENOSYS; + + while (ret != -EINPROGRESS && type < RESET_COUNT) { + for (uclass_first_device(UCLASS_RESET, &dev); + dev; + uclass_next_device(&dev)) { + ret = reset_request(dev, type); + if (ret == -EINPROGRESS) + break; + } + type++; + } + + return ret; +} + +void reset_walk_halt(enum reset_t type) +{ + int ret; + + ret = reset_walk(type); + + /* Wait for the reset to take effect */ + if (ret == -EINPROGRESS) + mdelay(100); + + /* Still no reset? Give up */ + printf("Reset not supported on this platform\n"); + hang(); +} + +/** + * reset_cpu() - calls reset_walk(RESET_WARM) + */ +void reset_cpu(ulong addr) +{ + reset_walk_halt(RESET_WARM); +} + + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + reset_walk_halt(RESET_WARM); + + return 0; +} + +UCLASS_DRIVER(reset) = { + .id = UCLASS_RESET, + .name = "reset", +}; diff --git a/drivers/misc/reset_sandbox.c b/drivers/misc/reset_sandbox.c new file mode 100644 index 0000000..917121b --- /dev/null +++ b/drivers/misc/reset_sandbox.c @@ -0,0 +1,100 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <reset.h> +#include <asm/state.h> +#include <asm/test.h> + +DECLARE_GLOBAL_DATA_PTR; + +static int sandbox_warm_reset_request(struct udevice *dev, enum reset_t type) +{ + struct sandbox_state *state = state_get_current(); + + switch (type) { + case RESET_WARM: + state->last_reset = type; + break; + default: + return -ENOSYS; + } + if (!state->reset_allowed[type]) + return -EACCES; + + return -EINPROGRESS; +} + +static int sandbox_reset_request(struct udevice *dev, enum reset_t type) +{ + struct sandbox_state *state = state_get_current(); + + /* + * If we have a device tree, the device we created from platform data + * (see the U_BOOT_DEVICE() declaration below) should not do anything. + * If we are that device, return an error. + */ + if (gd->fdt_blob && dev->of_offset == -1) + return -ENODEV; + + switch (type) { + case RESET_COLD: + state->last_reset = type; + break; + case RESET_POWER: + state->last_reset = type; + if (!state->reset_allowed[type]) + return -EACCES; + sandbox_exit(); + break; + default: + return -ENOSYS; + } + if (!state->reset_allowed[type]) + return -EACCES; + + return -EINPROGRESS; +} + +static struct reset_ops sandbox_reset_ops = { + .request = sandbox_reset_request, +}; + +static const struct udevice_id sandbox_reset_ids[] = { + { .compatible = "sandbox,reset" }, + { } +}; + +U_BOOT_DRIVER(reset_sandbox) = { + .name = "reset_sandbox", + .id = UCLASS_RESET, + .of_match = sandbox_reset_ids, + .ops = &sandbox_reset_ops, +}; + +static struct reset_ops sandbox_warm_reset_ops = { + .request = sandbox_warm_reset_request, +}; + +static const struct udevice_id sandbox_warm_reset_ids[] = { + { .compatible = "sandbox,warm-reset" }, + { } +}; + +U_BOOT_DRIVER(warm_reset_sandbox) = { + .name = "warm_reset_sandbox", + .id = UCLASS_RESET, + .of_match = sandbox_warm_reset_ids, + .ops = &sandbox_warm_reset_ops, +}; + +/* This is here in case we don't have a device tree */ +U_BOOT_DEVICE(reset_sandbox_non_fdt) = { + .name = "reset_sandbox", +}; diff --git a/drivers/misc/syscon_sandbox.c b/drivers/misc/syscon_sandbox.c new file mode 100644 index 0000000..ccfab3e --- /dev/null +++ b/drivers/misc/syscon_sandbox.c @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <syscon.h> +#include <asm/test.h> +#include <dm/lists.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const struct udevice_id sandbox_syscon_ids[] = { + { .compatible = "sandbox,syscon0", .data = SYSCON0 }, + { .compatible = "sandbox,syscon1", .data = SYSCON1 }, + { } +}; + +U_BOOT_DRIVER(sandbox_syscon) = { + .name = "sandbox_syscon", + .id = UCLASS_SYSCON, + .of_match = sandbox_syscon_ids, +}; diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 7ba85a2..3e835f7 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -1,5 +1,15 @@ menu "MMC Host controller Support" +config DM_MMC + bool "Enable MMC controllers using Driver Model" + depends on DM + help + This enables the MultiMediaCard (MMC) uclass which suports MMC and + Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.) + and non-removable (e.g. eMMC chip) devices are supported. These + appear as block devices in U-Boot and can support filesystems such + as EXT4 and FAT. + config SH_SDHI bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support" depends on RMOBILE diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index ed73687..286df2f 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -5,6 +5,8 @@ # SPDX-License-Identifier: GPL-2.0+ # +obj-$(CONFIG_DM_MMC) += mmc-uclass.o + obj-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o obj-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o obj-$(CONFIG_BFIN_SDH) += bfin_sdh.o @@ -29,6 +31,7 @@ obj-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o obj-$(CONFIG_S3C_SDI) += s3c_sdi.o obj-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o +obj-$(CONFIG_SANDBOX) += sandbox_mmc.o obj-$(CONFIG_SDHCI) += sdhci.o obj-$(CONFIG_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_SH_SDHI) += sh_sdhi.o diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c new file mode 100644 index 0000000..777489f --- /dev/null +++ b/drivers/mmc/mmc-uclass.c @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <mmc.h> +#include <dm.h> +#include <dm/lists.h> +#include <dm/root.h> + +struct mmc *mmc_get_mmc_dev(struct udevice *dev) +{ + struct mmc_uclass_priv *upriv; + + if (!device_active(dev)) + return NULL; + upriv = dev_get_uclass_priv(dev); + return upriv->mmc; +} + +U_BOOT_DRIVER(mmc) = { + .name = "mmc", + .id = UCLASS_MMC, +}; + +UCLASS_DRIVER(mmc) = { + .id = UCLASS_MMC, + .name = "mmc", + .flags = DM_UC_FLAG_SEQ_ALIAS, + .per_device_auto_alloc_size = sizeof(struct mmc_uclass_priv), +}; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 79e6fee..f12546a 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -250,14 +250,18 @@ static ulong mmc_bread(int dev_num, lbaint_t start, lbaint_t blkcnt, void *dst) return 0; } - if (mmc_set_blocklen(mmc, mmc->read_bl_len)) + if (mmc_set_blocklen(mmc, mmc->read_bl_len)) { + debug("%s: Failed to set blocklen\n", __func__); return 0; + } do { cur = (blocks_todo > mmc->cfg->b_max) ? mmc->cfg->b_max : blocks_todo; - if(mmc_read_blocks(mmc, dst, start, cur) != cur) + if (mmc_read_blocks(mmc, dst, start, cur) != cur) { + debug("%s: Failed to read blocks\n", __func__); return 0; + } blocks_todo -= cur; start += cur; dst += cur * mmc->read_bl_len; @@ -1758,11 +1762,18 @@ static void do_preinit(void) int mmc_initialize(bd_t *bis) { + static int initialized = 0; + if (initialized) /* Avoid initializing mmc multiple times */ + return 0; + initialized = 1; + INIT_LIST_HEAD (&mmc_devices); cur_dev_num = 0; +#ifndef CONFIG_DM_MMC if (board_mmc_init(bis) < 0) cpu_mmc_init(bis); +#endif #ifndef CONFIG_SPL_BUILD print_mmc_devices(','); diff --git a/drivers/mmc/sandbox_mmc.c b/drivers/mmc/sandbox_mmc.c new file mode 100644 index 0000000..f4646a8 --- /dev/null +++ b/drivers/mmc/sandbox_mmc.c @@ -0,0 +1,25 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <mmc.h> +#include <asm/test.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const struct udevice_id sandbox_mmc_ids[] = { + { .compatible = "sandbox,mmc" }, + { } +}; + +U_BOOT_DRIVER(warm_mmc_sandbox) = { + .name = "mmc_sandbox", + .id = UCLASS_MMC, + .of_match = sandbox_mmc_ids, +}; diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index e7ab828..f9b9493 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -433,6 +433,23 @@ static int sunxi_mmc_getcd(struct mmc *mmc) return !gpio_get_value(cd_pin); } +int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc) +{ + char *buf = malloc(512); + int valid_signature = 0; + + if (buf == NULL) + panic("Failed to allocate memory\n"); + + if (mmc_getcd(mmc) && mmc_init(mmc) == 0 && + mmc->block_dev.block_read(mmc->block_dev.dev, 16, 1, buf) == 1 && + strncmp(&buf[4], "eGON.BT0", 8) == 0) + valid_signature = 1; + + free(buf); + return valid_signature; +} + static const struct mmc_ops sunxi_mmc_ops = { .send_cmd = sunxi_mmc_send_cmd, .set_ios = sunxi_mmc_set_ios, diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index d555692..6f8b4d0 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -2,7 +2,7 @@ * (C) Copyright 2009 SAMSUNG Electronics * Minkyu Kang <mk7.kang@samsung.com> * Jaehoon Chung <jh80.chung@samsung.com> - * Portions Copyright 2011-2013 NVIDIA Corporation + * Portions Copyright 2011-2015 NVIDIA Corporation * * SPDX-License-Identifier: GPL-2.0+ */ @@ -67,7 +67,7 @@ static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data, bbstate->bounce_buffer, bbstate->user_buffer, data->blocks, data->blocksize); - writel((u32)bbstate->bounce_buffer, &host->reg->sysad); + writel((u32)(unsigned long)bbstate->bounce_buffer, &host->reg->sysad); /* * DMASEL[4:3] * 00 = Selects SDMA @@ -233,8 +233,8 @@ static int mmc_send_cmd_bounced(struct mmc *mmc, struct mmc_cmd *cmd, if (cmd->resp_type & MMC_RSP_136) { /* CRC is stripped so we need to do some shifting. */ for (i = 0; i < 4; i++) { - unsigned int offset = - (unsigned int)(&host->reg->rspreg3 - i); + unsigned long offset = + (unsigned long)(&host->reg->rspreg3 - i); cmd->response[i] = readl(offset) << 8; if (i != 3) { @@ -668,6 +668,16 @@ void tegra_mmc_init(void) const void *blob = gd->fdt_blob; debug("%s entry\n", __func__); + /* See if any Tegra210 MMC controllers are present */ + count = fdtdec_find_aliases_for_id(blob, "sdhci", + COMPAT_NVIDIA_TEGRA210_SDMMC, node_list, + CONFIG_SYS_MMC_MAX_DEVICE); + debug("%s: count of Tegra210 sdhci nodes is %d\n", __func__, count); + if (process_nodes(blob, node_list, count)) { + printf("%s: Error processing T30 mmc node(s)!\n", __func__); + return; + } + /* See if any Tegra124 MMC controllers are present */ count = fdtdec_find_aliases_for_id(blob, "sdhci", COMPAT_NVIDIA_TEGRA124_SDMMC, node_list, diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 645ca64..bcae842 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -528,7 +528,7 @@ static int designware_eth_send(struct udevice *dev, void *packet, int length) return _dw_eth_send(priv, packet, length); } -static int designware_eth_recv(struct udevice *dev, uchar **packetp) +static int designware_eth_recv(struct udevice *dev, int flags, uchar **packetp) { struct dw_eth_dev *priv = dev_get_priv(dev); diff --git a/drivers/net/fsl-mc/dpio/qbman_portal.c b/drivers/net/fsl-mc/dpio/qbman_portal.c index dd2a7de..5fa8d95 100644 --- a/drivers/net/fsl-mc/dpio/qbman_portal.c +++ b/drivers/net/fsl-mc/dpio/qbman_portal.c @@ -64,7 +64,7 @@ enum qbman_sdqcr_fc { struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d) { int ret; - struct qbman_swp *p = kmalloc(sizeof(*p), GFP_KERNEL); + struct qbman_swp *p = malloc(sizeof(struct qbman_swp)); if (!p) return NULL; @@ -77,7 +77,7 @@ struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d) qb_attr_code_encode(&code_sdqcr_dct, &p->sdq, qbman_sdqcr_dct_prio_ics); qb_attr_code_encode(&code_sdqcr_fc, &p->sdq, qbman_sdqcr_fc_up_to_3); qb_attr_code_encode(&code_sdqcr_tok, &p->sdq, 0xbb); - p->vdq.busy = 0; /* TODO: convert to atomic_t */ + atomic_set(&p->vdq.busy, 1); p->vdq.valid_bit = QB_VALID_BIT; p->dqrr.next_idx = 0; p->dqrr.valid_bit = QB_VALID_BIT; @@ -165,7 +165,6 @@ static struct qb_attr_code code_eq_qd_bin = QB_CODE(4, 0, 16); static struct qb_attr_code code_eq_qd_pri = QB_CODE(4, 16, 4); static struct qb_attr_code code_eq_rsp_stash = QB_CODE(5, 16, 1); static struct qb_attr_code code_eq_rsp_lo = QB_CODE(6, 0, 32); -static struct qb_attr_code code_eq_rsp_hi = QB_CODE(7, 0, 32); enum qbman_eq_cmd_e { /* No enqueue, primarily for plugging ORP gaps for dropped frames */ @@ -197,8 +196,7 @@ void qbman_eq_desc_set_response(struct qbman_eq_desc *d, { uint32_t *cl = qb_cl(d); - qb_attr_code_encode(&code_eq_rsp_lo, cl, lower32(storage_phys)); - qb_attr_code_encode(&code_eq_rsp_hi, cl, upper32(storage_phys)); + qb_attr_code_encode_64(&code_eq_rsp_lo, (uint64_t *)cl, storage_phys); qb_attr_code_encode(&code_eq_rsp_stash, cl, !!stash); } @@ -253,7 +251,6 @@ static struct qb_attr_code code_pull_numframes = QB_CODE(0, 8, 4); static struct qb_attr_code code_pull_token = QB_CODE(0, 16, 8); static struct qb_attr_code code_pull_dqsource = QB_CODE(1, 0, 24); static struct qb_attr_code code_pull_rsp_lo = QB_CODE(2, 0, 32); -static struct qb_attr_code code_pull_rsp_hi = QB_CODE(3, 0, 32); enum qb_pull_dt_e { qb_pull_dt_channel, @@ -282,8 +279,7 @@ void qbman_pull_desc_set_storage(struct qbman_pull_desc *d, } qb_attr_code_encode(&code_pull_rls, cl, 1); qb_attr_code_encode(&code_pull_stash, cl, !!stash); - qb_attr_code_encode(&code_pull_rsp_lo, cl, lower32(storage_phys)); - qb_attr_code_encode(&code_pull_rsp_hi, cl, upper32(storage_phys)); + qb_attr_code_encode_64(&code_pull_rsp_lo, (uint64_t *)cl, storage_phys); } void qbman_pull_desc_set_numframes(struct qbman_pull_desc *d, uint8_t numframes) @@ -316,10 +312,10 @@ int qbman_swp_pull(struct qbman_swp *s, struct qbman_pull_desc *d) uint32_t *p; uint32_t *cl = qb_cl(d); - /* TODO: convert to atomic_t */ - if (s->vdq.busy) + if (!atomic_dec_and_test(&s->vdq.busy)) { + atomic_inc(&s->vdq.busy); return -EBUSY; - s->vdq.busy = 1; + } s->vdq.storage = *(void **)&cl[4]; s->vdq.token = qb_attr_code_decode(&code_pull_token, cl); p = qbman_cena_write_start(&s->sys, QBMAN_CENA_SWP_VDQCR); @@ -359,36 +355,44 @@ const struct ldpaa_dq *qbman_swp_dqrr_next(struct qbman_swp *s) { uint32_t verb; uint32_t response_verb; - const struct ldpaa_dq *dq = qbman_cena_read(&s->sys, - QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)); - const uint32_t *p = qb_cl(dq); + uint32_t flags; + const struct ldpaa_dq *dq; + const uint32_t *p; + dq = qbman_cena_read(&s->sys, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)); + p = qb_cl(dq); verb = qb_attr_code_decode(&code_dqrr_verb, p); - /* If the valid-bit isn't of the expected polarity, nothing there */ + + /* If the valid-bit isn't of the expected polarity, nothing there. Note, + * in the DQRR reset bug workaround, we shouldn't need to skip these + * check, because we've already determined that a new entry is available + * and we've invalidated the cacheline before reading it, so the + * valid-bit behaviour is repaired and should tell us what we already + * knew from reading PI. + */ if ((verb & QB_VALID_BIT) != s->dqrr.valid_bit) { qbman_cena_invalidate_prefetch(&s->sys, - QBMAN_CENA_SWP_DQRR( - s->dqrr.next_idx)); + QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)); return NULL; } /* There's something there. Move "next_idx" attention to the next ring * entry (and prefetch it) before returning what we found. */ s->dqrr.next_idx++; - s->dqrr.next_idx &= 3; /* Wrap around at 4 */ + s->dqrr.next_idx &= QBMAN_DQRR_SIZE - 1; /* Wrap around at 4 */ /* TODO: it's possible to do all this without conditionals, optimise it * later. */ if (!s->dqrr.next_idx) s->dqrr.valid_bit ^= QB_VALID_BIT; - /* VDQCR "no longer busy" hook - if VDQCR shows "busy" and this is a - * VDQCR result, mark it as non-busy. */ - if (s->vdq.busy) { - uint32_t flags = ldpaa_dq_flags(dq); - - response_verb = qb_attr_code_decode(&code_dqrr_response, &verb); - if ((response_verb == QBMAN_DQRR_RESPONSE_DQ) && - (flags & LDPAA_DQ_STAT_VOLATILE)) - s->vdq.busy = 0; - } + + /* If this is the final response to a volatile dequeue command + indicate that the vdq is no longer busy */ + flags = ldpaa_dq_flags(dq); + response_verb = qb_attr_code_decode(&code_dqrr_response, &verb); + if ((response_verb == QBMAN_DQRR_RESPONSE_DQ) && + (flags & LDPAA_DQ_STAT_VOLATILE) && + (flags & LDPAA_DQ_STAT_EXPIRED)) + atomic_inc(&s->vdq.busy); + qbman_cena_invalidate_prefetch(&s->sys, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)); return dq; @@ -448,8 +452,10 @@ int qbman_dq_entry_has_newtoken(struct qbman_swp *s, * reset "busy". We instead base the decision on whether the current * result is sitting at the first 'storage' location of the busy * command. */ - if (s->vdq.busy && (s->vdq.storage == dq)) - s->vdq.busy = 0; + if (s->vdq.storage == dq) { + s->vdq.storage = NULL; + atomic_inc(&s->vdq.busy); + } return 1; } diff --git a/drivers/net/fsl-mc/dpio/qbman_portal.h b/drivers/net/fsl-mc/dpio/qbman_portal.h index bb67c3b..86e2c3a 100644 --- a/drivers/net/fsl-mc/dpio/qbman_portal.h +++ b/drivers/net/fsl-mc/dpio/qbman_portal.h @@ -14,6 +14,10 @@ /* Management command result codes */ #define QBMAN_MC_RSLT_OK 0xf0 +/* TBD: as of QBMan 4.1, DQRR will be 8 rather than 4! */ +#define QBMAN_DQRR_SIZE 4 + + /* --------------------- */ /* portal data structure */ /* --------------------- */ @@ -48,14 +52,13 @@ struct qbman_swp { * to whether or not a command can be submitted, not whether or * not a previously-submitted command is still executing. In * other words, once proof is seen that the previously-submitted - * command is executing, "vdq" is no longer "busy". TODO: - * convert this to "atomic_t" so that it is thread-safe (without - * locking). */ - int busy; + * command is executing, "vdq" is no longer "busy". + */ + atomic_t busy; uint32_t valid_bit; /* 0x00 or 0x80 */ /* We need to determine when vdq is no longer busy. This depends * on whether the "busy" (last-submitted) dequeue command is - * targetting DQRR or main-memory, and detected is based on the + * targeting DQRR or main-memory, and detected is based on the * presence of the dequeue command's "token" showing up in * dequeue entries in DQRR or main-memory (respectively). Debug * builds will, when submitting vdq commands, verify that the @@ -127,6 +130,7 @@ static inline uint32_t qb_attr_code_decode(const struct qb_attr_code *code, return d32_uint32_t(code->lsoffset, code->width, cacheline[code->word]); } + /* encode a field to a cacheline */ static inline void qb_attr_code_encode(const struct qb_attr_code *code, uint32_t *cacheline, uint32_t val) @@ -136,6 +140,12 @@ static inline void qb_attr_code_encode(const struct qb_attr_code *code, | e32_uint32_t(code->lsoffset, code->width, val); } +static inline void qb_attr_code_encode_64(const struct qb_attr_code *code, + uint64_t *cacheline, uint64_t val) +{ + cacheline[code->word / 2] = val; +} + /* ---------------------- */ /* Descriptors/cachelines */ /* ---------------------- */ @@ -144,7 +154,7 @@ static inline void qb_attr_code_encode(const struct qb_attr_code *code, * a "descriptor" type that the caller can instantiate however they like. * Ultimately though, it is just a cacheline of binary storage (or something * smaller when it is known that the descriptor doesn't need all 64 bytes) for - * holding pre-formatted pieces of harware commands. The performance-critical + * holding pre-formatted pieces of hardware commands. The performance-critical * code can then copy these descriptors directly into hardware command * registers more efficiently than trying to construct/format commands * on-the-fly. The API user sees the descriptor as an array of 32-bit words in diff --git a/drivers/net/fsl-mc/dpio/qbman_private.h b/drivers/net/fsl-mc/dpio/qbman_private.h index 2d2556b..f1f16b8 100644 --- a/drivers/net/fsl-mc/dpio/qbman_private.h +++ b/drivers/net/fsl-mc/dpio/qbman_private.h @@ -9,7 +9,7 @@ #include <errno.h> #include <asm/io.h> #include <linux/types.h> -#include <linux/compat.h> +#include <asm/atomic.h> #include <malloc.h> #include <fsl-mc/fsl_qbman_base.h> diff --git a/drivers/net/fsl-mc/dpni.c b/drivers/net/fsl-mc/dpni.c index b384401..7bc2504 100644 --- a/drivers/net/fsl-mc/dpni.c +++ b/drivers/net/fsl-mc/dpni.c @@ -313,7 +313,7 @@ int dpni_set_counter(struct fsl_mc_io *mc_io, int dpni_set_link_cfg(struct fsl_mc_io *mc_io, uint16_t token, - struct dpni_link_cfg *cfg) + const struct dpni_link_cfg *cfg) { struct mc_command cmd = { 0 }; diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index c5c44bc..62a68c2 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -3,13 +3,15 @@ * * SPDX-License-Identifier: GPL-2.0+ */ +#include <common.h> #include <errno.h> #include <asm/io.h> +#include <libfdt.h> +#include <fdt_support.h> #include <fsl-mc/fsl_mc.h> #include <fsl-mc/fsl_mc_sys.h> #include <fsl-mc/fsl_mc_private.h> #include <fsl-mc/fsl_dpmng.h> -#include <fsl_debug_server.h> #include <fsl-mc/fsl_dprc.h> #include <fsl-mc/fsl_dpio.h> #include <fsl-mc/fsl_qbman_portal.h> @@ -186,6 +188,36 @@ static int calculate_mc_private_ram_params(u64 mc_private_ram_start_addr, return 0; } +static int mc_fixup_dpc(u64 dpc_addr) +{ + void *blob = (void *)dpc_addr; + int nodeoffset; + + /* delete any existing ICID pools */ + nodeoffset = fdt_path_offset(blob, "/resources/icid_pools"); + if (fdt_del_node(blob, nodeoffset) < 0) + printf("\nfsl-mc: WARNING: could not delete ICID pool\n"); + + /* add a new pool */ + nodeoffset = fdt_path_offset(blob, "/resources"); + if (nodeoffset < 0) { + printf("\nfsl-mc: ERROR: DPC is missing /resources\n"); + return -EINVAL; + } + nodeoffset = fdt_add_subnode(blob, nodeoffset, "icid_pools"); + nodeoffset = fdt_add_subnode(blob, nodeoffset, "icid_pool@0"); + do_fixup_by_path_u32(blob, "/resources/icid_pools/icid_pool@0", + "base_icid", FSL_DPAA2_STREAM_ID_START, 1); + do_fixup_by_path_u32(blob, "/resources/icid_pools/icid_pool@0", + "num", + FSL_DPAA2_STREAM_ID_END - + FSL_DPAA2_STREAM_ID_START + 1, 1); + + flush_dcache_range(dpc_addr, dpc_addr + fdt_totalsize(blob)); + + return 0; +} + static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size) { u64 mc_dpc_offset; @@ -225,13 +257,13 @@ static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size) * Don't return with error here, since the MC firmware can * still boot without a DPC */ - printf("fsl-mc: WARNING: No DPC image found\n"); + printf("\nfsl-mc: WARNING: No DPC image found"); return 0; } dpc_size = fdt_totalsize(dpc_fdt_hdr); if (dpc_size > CONFIG_SYS_LS_MC_DPC_MAX_LENGTH) { - printf("fsl-mc: ERROR: Bad DPC image (too large: %d)\n", + printf("\nfsl-mc: ERROR: Bad DPC image (too large: %d)\n", dpc_size); return -EINVAL; } @@ -240,6 +272,9 @@ static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size) (u64)dpc_fdt_hdr, dpc_size, mc_ram_addr + mc_dpc_offset); #endif /* not defined CONFIG_SYS_LS_MC_DPC_IN_DDR */ + if (mc_fixup_dpc(mc_ram_addr + mc_dpc_offset)) + return -EINVAL; + dump_ram_words("DPC", (void *)(mc_ram_addr + mc_dpc_offset)); return 0; } @@ -279,13 +314,13 @@ static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size) error = fdt_check_header(dpl_fdt_hdr); if (error != 0) { - printf("fsl-mc: ERROR: Bad DPL image (bad header)\n"); + printf("\nfsl-mc: ERROR: Bad DPL image (bad header)\n"); return error; } dpl_size = fdt_totalsize(dpl_fdt_hdr); if (dpl_size > CONFIG_SYS_LS_MC_DPL_MAX_LENGTH) { - printf("fsl-mc: ERROR: Bad DPL image (too large: %d)\n", + printf("\nfsl-mc: ERROR: Bad DPL image (too large: %d)\n", dpl_size); return -EINVAL; } @@ -322,6 +357,23 @@ static unsigned long get_mc_boot_timeout_ms(void) return timeout_ms; } +#ifdef CONFIG_SYS_LS_MC_AIOP_IMG_IN_NOR +static int load_mc_aiop_img(u64 mc_ram_addr, size_t mc_ram_size) +{ + void *aiop_img; + + /* + * Load the MC AIOP image in the MC private DRAM block: + */ + + aiop_img = (void *)CONFIG_SYS_LS_MC_AIOP_IMG_ADDR; + mc_copy_image("MC AIOP image", + (u64)aiop_img, CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH, + mc_ram_addr + CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET); + + return 0; +} +#endif static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr) { u32 reg_gsr; @@ -330,7 +382,6 @@ static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr) struct mc_ccsr_registers __iomem *mc_ccsr_regs = MC_CCSR_BASE_ADDR; dmb(); - debug("Polling mc_ccsr_regs->reg_gsr ...\n"); assert(timeout_ms > 0); for (;;) { udelay(1000); /* throttle polling */ @@ -345,10 +396,7 @@ static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr) } if (timeout_ms == 0) { - if (booting_mc) - printf("fsl-mc: timeout booting management complex firmware\n"); - else - printf("fsl-mc: timeout deploying data path layout\n"); + printf("ERROR: timeout\n"); /* TODO: Get an error status from an MC CCSR register */ return -ETIMEDOUT; @@ -361,15 +409,13 @@ static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr) * appropriate errno, so that the status property is set to * failure in the fsl,dprc device tree node. */ - if (booting_mc) { - printf("fsl-mc: WARNING: Firmware booted with error (GSR: %#x)\n", - reg_gsr); - } else { - printf("fsl-mc: WARNING: Data path layout deployed with error (GSR: %#x)\n", - reg_gsr); - } + printf("WARNING: Firmware returned an error (GSR: %#x)\n", + reg_gsr); + } else { + printf("SUCCESS\n"); } + *final_reg_gsr = reg_gsr; return 0; } @@ -403,13 +449,6 @@ int mc_init(void) gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; } -#ifdef CONFIG_FSL_DEBUG_SERVER - /* - * FIXME: I don't think this is right. See get_dram_size_to_hide() - */ - mc_ram_addr -= debug_server_get_dram_block_size(); -#endif - error = calculate_mc_private_ram_params(mc_ram_addr, mc_ram_size, &mc_ram_aligned_base_addr, @@ -454,6 +493,12 @@ int mc_init(void) if (error != 0) goto out; +#ifdef CONFIG_SYS_LS_MC_AIOP_IMG_IN_NOR + error = load_mc_aiop_img(mc_ram_addr, mc_ram_size); + if (error != 0) + goto out; +#endif + debug("mc_ccsr_regs %p\n", mc_ccsr_regs); dump_mc_ccsr_regs(mc_ccsr_regs); @@ -465,14 +510,14 @@ int mc_init(void) out_le32(&mc_ccsr_regs->reg_mcfbalr, reg_mcfbalr); out_le32(&mc_ccsr_regs->reg_mcfbahr, (u32)(mc_ram_aligned_base_addr >> 32)); - out_le32(&mc_ccsr_regs->reg_mcfapr, MCFAPR_BYPASS_ICID_MASK); + out_le32(&mc_ccsr_regs->reg_mcfapr, FSL_BYPASS_AMQ); /* * Tell the MC that we want delayed DPL deployment. */ out_le32(&mc_ccsr_regs->reg_gsr, 0xDD00); - printf("\nfsl-mc: Booting Management Complex ...\n"); + printf("\nfsl-mc: Booting Management Complex ... "); /* * Deassert reset and release MC core 0 to run @@ -509,9 +554,14 @@ int mc_init(void) goto out; } - if (MC_VER_MAJOR != mc_ver_info.major) + if (MC_VER_MAJOR != mc_ver_info.major) { printf("fsl-mc: ERROR: Firmware major version mismatch (found: %d, expected: %d)\n", mc_ver_info.major, MC_VER_MAJOR); + printf("fsl-mc: Update the Management Complex firmware\n"); + + error = -ENODEV; + goto out; + } if (MC_VER_MINOR != mc_ver_info.minor) printf("fsl-mc: WARNING: Firmware minor version mismatch (found: %d, expected: %d)\n", @@ -525,13 +575,14 @@ int mc_init(void) * Tell the MC to deploy the DPL: */ out_le32(&mc_ccsr_regs->reg_gsr, 0x0); - printf("\nfsl-mc: Deploying data path layout ...\n"); + printf("fsl-mc: Deploying data path layout ... "); error = wait_for_mc(false, ®_gsr); if (error != 0) goto out; + out: if (error != 0) - mc_boot_status = -error; + mc_boot_status = error; else mc_boot_status = 0; @@ -600,14 +651,16 @@ int dpio_init(struct dprc_obj_desc obj_desc) printf("dpio_enable() failed %d\n", err); goto err_get_enable; } - debug("ce_paddr=0x%llx, ci_paddr=0x%llx, portalid=%d, prios=%d\n", - attr.qbman_portal_ce_paddr, - attr.qbman_portal_ci_paddr, + debug("ce_offset=0x%llx, ci_offset=0x%llx, portalid=%d, prios=%d\n", + attr.qbman_portal_ce_offset, + attr.qbman_portal_ci_offset, attr.qbman_portal_id, attr.num_priorities); - p_des.cena_bar = (void *)attr.qbman_portal_ce_paddr; - p_des.cinh_bar = (void *)attr.qbman_portal_ci_paddr; + p_des.cena_bar = (void *)(SOC_QBMAN_PORTALS_BASE_ADDR + + attr.qbman_portal_ce_offset); + p_des.cinh_bar = (void *)(SOC_QBMAN_PORTALS_BASE_ADDR + + attr.qbman_portal_ci_offset); dflt_dpio->sw_portal = qbman_swp_init(&p_des); if (dflt_dpio->sw_portal == NULL) { diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c index 0c5fdee..67b5702 100644 --- a/drivers/net/keystone_net.c +++ b/drivers/net/keystone_net.c @@ -512,6 +512,13 @@ static int keystone2_eth_rcv_packet(struct eth_device *dev) return pkt_size; } +#ifdef CONFIG_MCAST_TFTP +static int keystone2_eth_bcast_addr(struct eth_device *dev, u32 ip, u8 set) +{ + return 0; +} +#endif + /* * This function initializes the EMAC hardware. */ @@ -537,6 +544,9 @@ int keystone2_emac_initialize(struct eth_priv_t *eth_priv) dev->halt = keystone2_eth_close; dev->send = keystone2_eth_send_packet; dev->recv = keystone2_eth_rcv_packet; +#ifdef CONFIG_MCAST_TFTP + dev->mcast = keystone2_eth_bcast_addr; +#endif eth_register(dev); diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.c b/drivers/net/ldpaa_eth/ldpaa_eth.c index d4be1ba..50ca6e4 100644 --- a/drivers/net/ldpaa_eth/ldpaa_eth.c +++ b/drivers/net/ldpaa_eth/ldpaa_eth.c @@ -31,6 +31,8 @@ static void ldpaa_eth_rx(struct ldpaa_eth_priv *priv, uint32_t fd_length; struct ldpaa_fas *fas; uint32_t status, err; + u32 timeo = (CONFIG_SYS_HZ * 2) / 1000; + u32 time_start; struct qbman_release_desc releasedesc; struct qbman_swp *swp = dflt_dpio->sw_portal; @@ -65,10 +67,15 @@ error: flush_dcache_range(fd_addr, fd_addr + LDPAA_ETH_RX_BUFFER_SIZE); qbman_release_desc_clear(&releasedesc); qbman_release_desc_set_bpid(&releasedesc, dflt_dpbp->dpbp_attr.bpid); + time_start = get_timer(0); do { /* Release buffer into the QBMAN */ err = qbman_swp_release(swp, &releasedesc, &fd_addr, 1); - } while (err == -EBUSY); + } while (get_timer(time_start) < timeo && err == -EBUSY); + + if (err == -EBUSY) + printf("Rx frame: QBMAN buffer release fails\n"); + return; } @@ -77,7 +84,9 @@ static int ldpaa_eth_pull_dequeue_rx(struct eth_device *dev) struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)dev->priv; const struct ldpaa_dq *dq; const struct dpaa_fd *fd; - int i = 5, err = 0, status, loop = 20; + int i = 5, err = 0, status; + u32 timeo = (CONFIG_SYS_HZ * 2) / 1000; + u32 time_start; static struct qbman_pull_desc pulldesc; struct qbman_swp *swp = dflt_dpio->sw_portal; @@ -92,13 +101,11 @@ static int ldpaa_eth_pull_dequeue_rx(struct eth_device *dev) continue; } - do { - loop--; - dq = qbman_swp_dqrr_next(swp); + time_start = get_timer(0); - if (!loop) - break; - } while (!dq); + do { + dq = qbman_swp_dqrr_next(swp); + } while (get_timer(time_start) < timeo && !dq); if (dq) { /* Check for valid frame. If not sent a consume @@ -112,7 +119,7 @@ static int ldpaa_eth_pull_dequeue_rx(struct eth_device *dev) debug("No frame delivered\n"); qbman_swp_dqrr_consume(swp, dq); - break; + continue; } fd = ldpaa_dq_fd(dq); @@ -121,92 +128,9 @@ static int ldpaa_eth_pull_dequeue_rx(struct eth_device *dev) ldpaa_eth_rx(priv, fd); qbman_swp_dqrr_consume(swp, dq); break; - } - } - - return err; -} - -static void ldpaa_eth_tx_conf(struct ldpaa_eth_priv *priv, - const struct dpaa_fd *fd) -{ - uint64_t fd_addr; - struct ldpaa_fas *fas; - uint32_t status, err; - struct qbman_release_desc releasedesc; - struct qbman_swp *swp = dflt_dpio->sw_portal; - - fd_addr = ldpaa_fd_get_addr(fd); - - - debug("TX Conf frame:data addr=0x%p\n", (u64 *)fd_addr); - - /* Check the status from the Frame Annotation */ - if (fd->simple.frc & LDPAA_FD_FRC_FASV) { - fas = (struct ldpaa_fas *) - ((uint8_t *)(fd_addr) + - priv->buf_layout.private_data_size); - status = le32_to_cpu(fas->status); - if (status & LDPAA_ETH_TXCONF_ERR_MASK) { - printf("TxConf frame error(s): 0x%08x\n", - status & LDPAA_ETH_TXCONF_ERR_MASK); - } - } - - qbman_release_desc_clear(&releasedesc); - qbman_release_desc_set_bpid(&releasedesc, dflt_dpbp->dpbp_attr.bpid); - do { - /* Release buffer into the QBMAN */ - err = qbman_swp_release(swp, &releasedesc, &fd_addr, 1); - } while (err == -EBUSY); -} - -static int ldpaa_eth_pull_dequeue_tx_conf(struct ldpaa_eth_priv *priv) -{ - const struct ldpaa_dq *dq; - const struct dpaa_fd *fd; - int err = 0; - int i = 5, status, loop = 20; - static struct qbman_pull_desc pulldesc; - struct qbman_swp *swp = dflt_dpio->sw_portal; - - while (--i) { - qbman_pull_desc_clear(&pulldesc); - qbman_pull_desc_set_numframes(&pulldesc, 1); - qbman_pull_desc_set_fq(&pulldesc, priv->tx_conf_fqid); - - err = qbman_swp_pull(swp, &pulldesc); - if (err < 0) { - printf("Dequeue TX conf frames error:0x%08x\n", err); - continue; - } - - do { - loop--; - dq = qbman_swp_dqrr_next(swp); - - if (!loop) - break; - } while (!dq); - - if (dq) { - /* Check for valid frame. If not sent a consume - * confirmation to QBMAN otherwise give it to NADK - * application and then send consume confirmation to - * QBMAN. - */ - status = (uint8_t)ldpaa_dq_flags(dq); - if ((status & LDPAA_DQ_STAT_VALIDFRAME) == 0) { - debug("Dequeue TX conf frames:"); - debug("No frame is delivered\n"); - - qbman_swp_dqrr_consume(swp, dq); - break; - } - fd = ldpaa_dq_fd(dq); - - ldpaa_eth_tx_conf(priv, fd); - qbman_swp_dqrr_consume(swp, dq); + } else { + err = -ENODATA; + debug("No DQRR entries\n"); break; } } @@ -220,8 +144,11 @@ static int ldpaa_eth_tx(struct eth_device *net_dev, void *buf, int len) struct dpaa_fd fd; u64 buffer_start; int data_offset, err; + u32 timeo = (CONFIG_SYS_HZ * 10) / 1000; + u32 time_start; struct qbman_swp *swp = dflt_dpio->sw_portal; struct qbman_eq_desc ed; + struct qbman_release_desc releasedesc; /* Setup the FD fields */ memset(&fd, 0, sizeof(fd)); @@ -257,15 +184,34 @@ static int ldpaa_eth_tx(struct eth_device *net_dev, void *buf, int len) qbman_eq_desc_clear(&ed); qbman_eq_desc_set_no_orp(&ed, 0); qbman_eq_desc_set_qd(&ed, priv->tx_qdid, priv->tx_flow_id, 0); - err = qbman_swp_enqueue(swp, &ed, (const struct qbman_fd *)(&fd)); - if (err < 0) + + time_start = get_timer(0); + + while (get_timer(time_start) < timeo) { + err = qbman_swp_enqueue(swp, &ed, + (const struct qbman_fd *)(&fd)); + if (err != -EBUSY) + break; + } + + if (err < 0) { printf("error enqueueing Tx frame\n"); + goto error; + } + + return err; - mdelay(1); +error: + qbman_release_desc_clear(&releasedesc); + qbman_release_desc_set_bpid(&releasedesc, dflt_dpbp->dpbp_attr.bpid); + time_start = get_timer(0); + do { + /* Release buffer into the QBMAN */ + err = qbman_swp_release(swp, &releasedesc, &buffer_start, 1); + } while (get_timer(time_start) < timeo && err == -EBUSY); - err = ldpaa_eth_pull_dequeue_tx_conf(priv); - if (err < 0) - printf("error Tx Conf frame\n"); + if (err == -EBUSY) + printf("TX data: QBMAN buffer release fails\n"); return err; } @@ -274,7 +220,6 @@ static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd) { struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv; struct dpni_queue_attr rx_queue_attr; - struct dpni_tx_flow_attr tx_flow_attr; uint8_t mac_addr[6]; int err; @@ -345,21 +290,11 @@ static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd) goto err_qdid; } - err = dpni_get_tx_flow(dflt_mc_io, priv->dpni_handle, priv->tx_flow_id, - &tx_flow_attr); - if (err) { - printf("dpni_get_tx_flow() failed\n"); - goto err_tx_flow; - } - - priv->tx_conf_fqid = tx_flow_attr.conf_err_attr.queue_attr.fqid; - if (!priv->phydev->link) printf("%s: No link.\n", priv->phydev->dev->name); return priv->phydev->link ? 0 : -1; -err_tx_flow: err_qdid: err_rx_flow: dpni_disable(dflt_mc_io, priv->dpni_handle); @@ -626,6 +561,9 @@ static int ldpaa_dpni_bind(struct ldpaa_eth_priv *priv) priv->tx_flow_id = DPNI_NEW_FLOW_ID; memset(&dflt_tx_flow, 0, sizeof(dflt_tx_flow)); + dflt_tx_flow.options = DPNI_TX_FLOW_OPT_ONLY_TX_ERROR; + dflt_tx_flow.conf_err_cfg.use_default_queue = 0; + dflt_tx_flow.conf_err_cfg.errors_only = 1; err = dpni_set_tx_flow(dflt_mc_io, priv->dpni_handle, &priv->tx_flow_id, &dflt_tx_flow); if (err) { diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.h b/drivers/net/ldpaa_eth/ldpaa_eth.h index 3107ab6..b4ef700 100644 --- a/drivers/net/ldpaa_eth/ldpaa_eth.h +++ b/drivers/net/ldpaa_eth/ldpaa_eth.h @@ -128,7 +128,6 @@ struct ldpaa_eth_priv { uint32_t rx_dflt_fqid; uint16_t tx_qdid; - uint32_t tx_conf_fqid; uint16_t tx_flow_id; enum ldpaa_eth_type type; /* 1G or 10G ethernet */ diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c index 958488c..7b6e20f 100644 --- a/drivers/net/rtl8169.c +++ b/drivers/net/rtl8169.c @@ -41,10 +41,13 @@ * Modified to use le32_to_cpu and cpu_to_le32 properly */ #include <common.h> +#include <dm.h> #include <errno.h> #include <malloc.h> #include <net.h> +#ifndef CONFIG_DM_ETH #include <netdev.h> +#endif #include <asm/io.h> #include <pci.h> @@ -281,6 +284,8 @@ struct RxDesc { u32 buf_Haddr; }; +static unsigned char rxdata[RX_BUF_LEN]; + #define RTL8169_DESC_SIZE 16 #if ARCH_DMA_MINALIGN > 256 @@ -299,7 +304,8 @@ struct RxDesc { * the driver to allocate descriptors from a pool of non-cached memory. */ #if RTL8169_DESC_SIZE < ARCH_DMA_MINALIGN -#if !defined(CONFIG_SYS_NONCACHED_MEMORY) && !defined(CONFIG_SYS_DCACHE_OFF) +#if !defined(CONFIG_SYS_NONCACHED_MEMORY) && \ + !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_X86) #warning cache-line size is larger than descriptor size #endif #endif @@ -317,6 +323,7 @@ DEFINE_ALIGN_BUFFER(u8, txb, NUM_TX_DESC * RX_BUF_SIZE, RTL8169_ALIGN); DEFINE_ALIGN_BUFFER(u8, rxb, NUM_RX_DESC * RX_BUF_SIZE, RTL8169_ALIGN); struct rtl8169_private { + ulong iobase; void *mmio_addr; /* memory map physical address */ int chipset; unsigned long cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */ @@ -338,9 +345,9 @@ static const unsigned int rtl8169_rx_config = (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift); static struct pci_device_id supported[] = { - {PCI_VENDOR_ID_REALTEK, 0x8167}, - {PCI_VENDOR_ID_REALTEK, 0x8168}, - {PCI_VENDOR_ID_REALTEK, 0x8169}, + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167) }, + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168) }, + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169) }, {} }; @@ -380,7 +387,7 @@ int mdio_read(int RegAddr) return value; } -static int rtl8169_init_board(struct eth_device *dev) +static int rtl8169_init_board(unsigned long dev_iobase, const char *name) { int i; u32 tmp; @@ -388,7 +395,7 @@ static int rtl8169_init_board(struct eth_device *dev) #ifdef DEBUG_RTL8169 printf ("%s\n", __FUNCTION__); #endif - ioaddr = dev->iobase; + ioaddr = dev_iobase; /* Soft reset the chip. */ RTL_W8(ChipCmd, CmdReset); @@ -412,7 +419,8 @@ static int rtl8169_init_board(struct eth_device *dev) } /* if unknown chip, assume array element #0, original RTL-8169 in this case */ - printf("PCI device %s: unknown chip version, assuming RTL-8169\n", dev->name); + printf("PCI device %s: unknown chip version, assuming RTL-8169\n", + name); printf("PCI device: TxConfig = 0x%lX\n", (unsigned long) RTL_R32(TxConfig)); tpc->chipset = 0; @@ -504,7 +512,8 @@ static void rtl_flush_buffer(void *buf, size_t size) /************************************************************************** RECV - Receive a frame ***************************************************************************/ -static int rtl_recv(struct eth_device *dev) +static int rtl_recv_common(pci_dev_t bdf, unsigned long dev_iobase, + uchar **packetp) { /* return true if there's an ethernet packet ready to read */ /* nic->packet should contain data on return */ @@ -515,7 +524,7 @@ static int rtl_recv(struct eth_device *dev) #ifdef DEBUG_RTL8169_RX printf ("%s\n", __FUNCTION__); #endif - ioaddr = dev->iobase; + ioaddr = dev_iobase; cur_rx = tpc->cur_rx; @@ -523,7 +532,6 @@ static int rtl_recv(struct eth_device *dev) if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) { if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) { - unsigned char rxdata[RX_BUF_LEN]; length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx]. status) & 0x00001FFF) - 4; @@ -536,17 +544,22 @@ static int rtl_recv(struct eth_device *dev) else tpc->RxDescArray[cur_rx].status = cpu_to_le32(OWNbit + RX_BUF_SIZE); - tpc->RxDescArray[cur_rx].buf_addr = - cpu_to_le32(bus_to_phys(tpc->RxBufferRing[cur_rx])); + tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32( + pci_mem_to_phys(bdf, (pci_addr_t)(unsigned long) + tpc->RxBufferRing[cur_rx])); rtl_flush_rx_desc(&tpc->RxDescArray[cur_rx]); - +#ifdef CONFIG_DM_ETH + *packetp = rxdata; +#else net_process_received_packet(rxdata, length); +#endif } else { puts("Error Rx"); + length = -EIO; } cur_rx = (cur_rx + 1) % NUM_RX_DESC; tpc->cur_rx = cur_rx; - return 1; + return length; } else { ushort sts = RTL_R8(IntrStatus); @@ -557,11 +570,26 @@ static int rtl_recv(struct eth_device *dev) return (0); /* initially as this is called to flush the input */ } +#ifdef CONFIG_DM_ETH +int rtl8169_eth_recv(struct udevice *dev, int flags, uchar **packetp) +{ + struct rtl8169_private *priv = dev_get_priv(dev); + + return rtl_recv_common(pci_get_bdf(dev), priv->iobase, packetp); +} +#else +static int rtl_recv(struct eth_device *dev) +{ + return rtl_recv_common((pci_dev_t)dev->priv, dev->iobase, NULL); +} +#endif /* nCONFIG_DM_ETH */ + #define HZ 1000 /************************************************************************** SEND - Transmit a frame ***************************************************************************/ -static int rtl_send(struct eth_device *dev, void *packet, int length) +static int rtl_send_common(pci_dev_t bdf, unsigned long dev_iobase, + void *packet, int length) { /* send the packet to destination */ @@ -577,7 +605,7 @@ static int rtl_send(struct eth_device *dev, void *packet, int length) printf("sending %d bytes\n", len); #endif - ioaddr = dev->iobase; + ioaddr = dev_iobase; /* point to the current txb incase multiple tx_rings are used */ ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE]; @@ -588,7 +616,8 @@ static int rtl_send(struct eth_device *dev, void *packet, int length) ptxb[len++] = '\0'; tpc->TxDescArray[entry].buf_Haddr = 0; - tpc->TxDescArray[entry].buf_addr = cpu_to_le32(bus_to_phys(ptxb)); + tpc->TxDescArray[entry].buf_addr = cpu_to_le32( + pci_mem_to_phys(bdf, (pci_addr_t)(unsigned long)ptxb)); if (entry != (NUM_TX_DESC - 1)) { tpc->TxDescArray[entry].status = cpu_to_le32((OWNbit | FSbit | LSbit) | @@ -625,7 +654,23 @@ static int rtl_send(struct eth_device *dev, void *packet, int length) return ret; } -static void rtl8169_set_rx_mode(struct eth_device *dev) +#ifdef CONFIG_DM_ETH +int rtl8169_eth_send(struct udevice *dev, void *packet, int length) +{ + struct rtl8169_private *priv = dev_get_priv(dev); + + return rtl_send_common(pci_get_bdf(dev), priv->iobase, packet, length); +} + +#else +static int rtl_send(struct eth_device *dev, void *packet, int length) +{ + return rtl_send_common((pci_dev_t)dev->priv, dev->iobase, packet, + length); +} +#endif + +static void rtl8169_set_rx_mode(void) { u32 mc_filter[2]; /* Multicast hash filter */ int rx_mode; @@ -648,7 +693,7 @@ static void rtl8169_set_rx_mode(struct eth_device *dev) RTL_W32(MAR0 + 4, mc_filter[1]); } -static void rtl8169_hw_start(struct eth_device *dev) +static void rtl8169_hw_start(pci_dev_t bdf) { u32 i; @@ -693,9 +738,11 @@ static void rtl8169_hw_start(struct eth_device *dev) tpc->cur_rx = 0; - RTL_W32(TxDescStartAddrLow, bus_to_phys(tpc->TxDescArray)); + RTL_W32(TxDescStartAddrLow, pci_mem_to_phys(bdf, + (pci_addr_t)(unsigned long)tpc->TxDescArray)); RTL_W32(TxDescStartAddrHigh, (unsigned long)0); - RTL_W32(RxDescStartAddrLow, bus_to_phys(tpc->RxDescArray)); + RTL_W32(RxDescStartAddrLow, pci_mem_to_phys( + bdf, (pci_addr_t)(unsigned long)tpc->RxDescArray)); RTL_W32(RxDescStartAddrHigh, (unsigned long)0); /* RTL-8169sc/8110sc or later version */ @@ -707,7 +754,7 @@ static void rtl8169_hw_start(struct eth_device *dev) RTL_W32(RxMissed, 0); - rtl8169_set_rx_mode(dev); + rtl8169_set_rx_mode(); /* no early-rx interrupts */ RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000); @@ -717,7 +764,7 @@ static void rtl8169_hw_start(struct eth_device *dev) #endif } -static void rtl8169_init_ring(struct eth_device *dev) +static void rtl8169_init_ring(pci_dev_t bdf) { int i; @@ -745,8 +792,8 @@ static void rtl8169_init_ring(struct eth_device *dev) cpu_to_le32(OWNbit + RX_BUF_SIZE); tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE]; - tpc->RxDescArray[i].buf_addr = - cpu_to_le32(bus_to_phys(tpc->RxBufferRing[i])); + tpc->RxDescArray[i].buf_addr = cpu_to_le32(pci_mem_to_phys( + bdf, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i])); rtl_flush_rx_desc(&tpc->RxDescArray[i]); } @@ -755,10 +802,7 @@ static void rtl8169_init_ring(struct eth_device *dev) #endif } -/************************************************************************** -RESET - Finish setting up the ethernet interface -***************************************************************************/ -static int rtl_reset(struct eth_device *dev, bd_t *bis) +static void rtl8169_common_start(pci_dev_t bdf, unsigned char *enetaddr) { int i; @@ -767,30 +811,47 @@ static int rtl_reset(struct eth_device *dev, bd_t *bis) printf ("%s\n", __FUNCTION__); #endif - rtl8169_init_ring(dev); - rtl8169_hw_start(dev); + rtl8169_init_ring(bdf); + rtl8169_hw_start(bdf); /* Construct a perfect filter frame with the mac address as first match * and broadcast for all others */ for (i = 0; i < 192; i++) txb[i] = 0xFF; - txb[0] = dev->enetaddr[0]; - txb[1] = dev->enetaddr[1]; - txb[2] = dev->enetaddr[2]; - txb[3] = dev->enetaddr[3]; - txb[4] = dev->enetaddr[4]; - txb[5] = dev->enetaddr[5]; + txb[0] = enetaddr[0]; + txb[1] = enetaddr[1]; + txb[2] = enetaddr[2]; + txb[3] = enetaddr[3]; + txb[4] = enetaddr[4]; + txb[5] = enetaddr[5]; #ifdef DEBUG_RTL8169 printf("%s elapsed time : %lu\n", __func__, currticks()-stime); #endif - return 0; } +#ifdef CONFIG_DM_ETH +static int rtl8169_eth_start(struct udevice *dev) +{ + struct eth_pdata *plat = dev_get_platdata(dev); + + rtl8169_common_start(pci_get_bdf(dev), plat->enetaddr); + + return 0; +} +#else /************************************************************************** -HALT - Turn off ethernet interface +RESET - Finish setting up the ethernet interface ***************************************************************************/ -static void rtl_halt(struct eth_device *dev) +static int rtl_reset(struct eth_device *dev, bd_t *bis) +{ + rtl8169_common_start((pci_dev_t)dev->priv, dev->enetaddr); + + return 0; +} +#endif /* nCONFIG_DM_ETH */ + +static void rtl_halt_common(unsigned long dev_iobase) { int i; @@ -798,7 +859,7 @@ static void rtl_halt(struct eth_device *dev) printf ("%s\n", __FUNCTION__); #endif - ioaddr = dev->iobase; + ioaddr = dev_iobase; /* Stop the chip's Tx and Rx DMA processes. */ RTL_W8(ChipCmd, 0x00); @@ -813,13 +874,31 @@ static void rtl_halt(struct eth_device *dev) } } +#ifdef CONFIG_DM_ETH +void rtl8169_eth_stop(struct udevice *dev) +{ + struct rtl8169_private *priv = dev_get_priv(dev); + + rtl_halt_common(priv->iobase); +} +#else +/************************************************************************** +HALT - Turn off ethernet interface +***************************************************************************/ +static void rtl_halt(struct eth_device *dev) +{ + rtl_halt_common(dev->iobase); +} +#endif + /************************************************************************** INIT - Look for an adapter, this routine's visible to the outside ***************************************************************************/ #define board_found 1 #define valid_link 0 -static int rtl_init(struct eth_device *dev, bd_t *bis) +static int rtl_init(unsigned long dev_ioaddr, const char *name, + unsigned char *enetaddr) { static int board_idx = -1; int i, rc; @@ -828,33 +907,32 @@ static int rtl_init(struct eth_device *dev, bd_t *bis) #ifdef DEBUG_RTL8169 printf ("%s\n", __FUNCTION__); #endif - - ioaddr = dev->iobase; + ioaddr = dev_ioaddr; board_idx++; /* point to private storage */ tpc = &tpx; - rc = rtl8169_init_board(dev); + rc = rtl8169_init_board(ioaddr, name); if (rc) return rc; /* Get MAC address. FIXME: read EEPROM */ for (i = 0; i < MAC_ADDR_LEN; i++) - dev->enetaddr[i] = RTL_R8(MAC0 + i); + enetaddr[i] = RTL_R8(MAC0 + i); #ifdef DEBUG_RTL8169 printf("chipset = %d\n", tpc->chipset); printf("MAC Address"); for (i = 0; i < MAC_ADDR_LEN; i++) - printf(":%02x", dev->enetaddr[i]); + printf(":%02x", enetaddr[i]); putc('\n'); #endif #ifdef DEBUG_RTL8169 /* Print out some hardware info */ - printf("%s: at ioaddr 0x%lx\n", dev->name, ioaddr); + printf("%s: at ioaddr 0x%lx\n", name, ioaddr); #endif /* if TBI is not endbled */ @@ -964,6 +1042,7 @@ static int rtl_init(struct eth_device *dev, bd_t *bis) return 0; } +#ifndef CONFIG_DM_ETH int rtl8169_initialize(bd_t *bis) { pci_dev_t devno; @@ -1014,7 +1093,7 @@ int rtl8169_initialize(bd_t *bis) dev->send = rtl_send; dev->recv = rtl_recv; - err = rtl_init(dev, bis); + err = rtl_init(dev->iobase, dev->name, dev->enetaddr); if (err < 0) { printf(pr_fmt("failed to initialize card: %d\n"), err); free(dev); @@ -1027,3 +1106,62 @@ int rtl8169_initialize(bd_t *bis) } return card_number; } +#endif + +#ifdef CONFIG_DM_ETH +static int rtl8169_eth_probe(struct udevice *dev) +{ + struct pci_child_platdata *pplat = dev_get_parent_platdata(dev); + struct rtl8169_private *priv = dev_get_priv(dev); + struct eth_pdata *plat = dev_get_platdata(dev); + u32 iobase; + int region; + int ret; + + debug("rtl8169: REALTEK RTL8169 @0x%x\n", iobase); + switch (pplat->device) { + case 0x8168: + region = 2; + break; + default: + region = 1; + break; + } + pci_read_config32(pci_get_bdf(dev), PCI_BASE_ADDRESS_0 + region * 4, + &iobase); + iobase &= ~0xf; + priv->iobase = (int)pci_mem_to_phys(pci_get_bdf(dev), iobase); + + ret = rtl_init(priv->iobase, dev->name, plat->enetaddr); + if (ret < 0) { + printf(pr_fmt("failed to initialize card: %d\n"), ret); + return ret; + } + + return 0; +} + +static const struct eth_ops rtl8169_eth_ops = { + .start = rtl8169_eth_start, + .send = rtl8169_eth_send, + .recv = rtl8169_eth_recv, + .stop = rtl8169_eth_stop, +}; + +static const struct udevice_id rtl8169_eth_ids[] = { + { .compatible = "realtek,rtl8169" }, + { } +}; + +U_BOOT_DRIVER(eth_rtl8169) = { + .name = "eth_rtl8169", + .id = UCLASS_ETH, + .of_match = rtl8169_eth_ids, + .probe = rtl8169_eth_probe, + .ops = &rtl8169_eth_ops, + .priv_auto_alloc_size = sizeof(struct rtl8169_private), + .platdata_auto_alloc_size = sizeof(struct eth_pdata), +}; + +U_BOOT_PCI_DEVICE(eth_rtl8169, supported); +#endif diff --git a/drivers/net/sandbox-raw.c b/drivers/net/sandbox-raw.c index 45c3b18..5912427 100644 --- a/drivers/net/sandbox-raw.c +++ b/drivers/net/sandbox-raw.c @@ -65,7 +65,7 @@ static int sb_eth_raw_send(struct udevice *dev, void *packet, int length) return sandbox_eth_raw_os_send(packet, length, priv); } -static int sb_eth_raw_recv(struct udevice *dev, uchar **packetp) +static int sb_eth_raw_recv(struct udevice *dev, int flags, uchar **packetp) { struct eth_pdata *pdata = dev_get_platdata(dev); struct eth_sandbox_raw_priv *priv = dev_get_priv(dev); diff --git a/drivers/net/sandbox.c b/drivers/net/sandbox.c index 4e083d3..6763a24 100644 --- a/drivers/net/sandbox.c +++ b/drivers/net/sandbox.c @@ -152,7 +152,7 @@ static int sb_eth_send(struct udevice *dev, void *packet, int length) return 0; } -static int sb_eth_recv(struct udevice *dev, uchar **packetp) +static int sb_eth_recv(struct udevice *dev, int flags, uchar **packetp) { struct eth_sandbox_priv *priv = dev_get_priv(dev); diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c index e939bf2..11cd0ea 100644 --- a/drivers/net/sunxi_emac.c +++ b/drivers/net/sunxi_emac.c @@ -527,7 +527,7 @@ static int sunxi_emac_eth_send(struct udevice *dev, void *packet, int length) return _sunxi_emac_eth_send(priv, packet, length); } -static int sunxi_emac_eth_recv(struct udevice *dev, uchar **packetp) +static int sunxi_emac_eth_recv(struct udevice *dev, int flags, uchar **packetp) { struct emac_eth_dev *priv = dev_get_priv(dev); int rx_len; diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index c723dbb..b2006df 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -20,6 +20,7 @@ #include <phy.h> #include <miiphy.h> #include <watchdog.h> +#include <asm/system.h> #include <asm/arch/hardware.h> #include <asm/arch/sys_proto.h> @@ -58,7 +59,14 @@ #define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x000080000 /* Div pclk by 32, 80MHz */ #define ZYNQ_GEM_NWCFG_MDCCLKDIV2 0x0000c0000 /* Div pclk by 48, 120MHz */ -#define ZYNQ_GEM_NWCFG_INIT (ZYNQ_GEM_NWCFG_FDEN | \ +#ifdef CONFIG_ARM64 +# define ZYNQ_GEM_DBUS_WIDTH (1 << 21) /* 64 bit bus */ +#else +# define ZYNQ_GEM_DBUS_WIDTH (0 << 21) /* 32 bit bus */ +#endif + +#define ZYNQ_GEM_NWCFG_INIT (ZYNQ_GEM_DBUS_WIDTH | \ + ZYNQ_GEM_NWCFG_FDEN | \ ZYNQ_GEM_NWCFG_FSREM | \ ZYNQ_GEM_NWCFG_MDCCLKDIV) @@ -130,7 +138,7 @@ struct emac_bd { u32 status; }; -#define RX_BUF 3 +#define RX_BUF 32 /* Page table entries are set to 1MB, or multiples of 1MB * (not < 1MB). driver uses less bd's so use 1MB bdspace. */ @@ -155,7 +163,7 @@ struct zynq_gem_priv { static inline int mdio_wait(struct eth_device *dev) { struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase; - u32 timeout = 200; + u32 timeout = 20000; /* Wait till MDIO interface is ready to accept a new transaction. */ while (--timeout) { @@ -395,12 +403,18 @@ static int zynq_gem_send(struct eth_device *dev, void *ptr, int len) priv->tx_bd->addr = (u32)ptr; priv->tx_bd->status = (len & ZYNQ_GEM_TXBUF_FRMLEN_MASK) | - ZYNQ_GEM_TXBUF_LAST_MASK; + ZYNQ_GEM_TXBUF_LAST_MASK | + ZYNQ_GEM_TXBUF_WRAP_MASK; addr = (u32) ptr; addr &= ~(ARCH_DMA_MINALIGN - 1); size = roundup(len, ARCH_DMA_MINALIGN); flush_dcache_range(addr, addr + size); + + addr = (u32)priv->rxbuffers; + addr &= ~(ARCH_DMA_MINALIGN - 1); + size = roundup((RX_BUF * PKTSIZE_ALIGN), ARCH_DMA_MINALIGN); + flush_dcache_range(addr, addr + size); barrier(); /* Start transmit */ @@ -436,8 +450,6 @@ static int zynq_gem_recv(struct eth_device *dev) if (frame_len) { u32 addr = current_bd->addr & ZYNQ_GEM_RXBUF_ADD_MASK; addr &= ~(ARCH_DMA_MINALIGN - 1); - u32 size = roundup(frame_len, ARCH_DMA_MINALIGN); - invalidate_dcache_range(addr, addr + size); net_process_received_packet((u8 *)addr, frame_len); @@ -511,7 +523,7 @@ int zynq_gem_initialize(bd_t *bis, phys_addr_t base_addr, priv->rxbuffers = memalign(ARCH_DMA_MINALIGN, RX_BUF * PKTSIZE_ALIGN); memset(priv->rxbuffers, 0, RX_BUF * PKTSIZE_ALIGN); - /* Align bd_space to 1MB */ + /* Align bd_space to MMU_SECTION_SHIFT */ bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE); mmu_set_region_dcache_behaviour((phys_addr_t)bd_space, BD_SPACE, DCACHE_OFF); diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index 5b91fe3..c7d93f9 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -30,6 +30,14 @@ struct pci_controller *pci_bus_to_hose(int busnum) return dev_get_uclass_priv(bus); } +pci_dev_t pci_get_bdf(struct udevice *dev) +{ + struct pci_child_platdata *pplat = dev_get_parent_platdata(dev); + struct udevice *bus = dev->parent; + + return PCI_ADD_BUS(bus->seq, pplat->devfn); +} + /** * pci_get_bus_max() - returns the bus number of the last active bus * @@ -199,8 +207,7 @@ int pci_write_config(pci_dev_t bdf, int offset, unsigned long value, if (ret) return ret; - return pci_bus_write_config(bus, PCI_MASK_BUS(bdf), offset, value, - size); + return pci_bus_write_config(bus, bdf, offset, value, size); } int pci_write_config32(pci_dev_t bdf, int offset, u32 value) @@ -239,8 +246,7 @@ int pci_read_config(pci_dev_t bdf, int offset, unsigned long *valuep, if (ret) return ret; - return pci_bus_read_config(bus, PCI_MASK_BUS(bdf), offset, valuep, - size); + return pci_bus_read_config(bus, bdf, offset, valuep, size); } int pci_read_config32(pci_dev_t bdf, int offset, u32 *valuep) @@ -295,19 +301,10 @@ int pci_auto_config_devices(struct udevice *bus) for (ret = device_find_first_child(bus, &dev); !ret && dev; ret = device_find_next_child(&dev)) { - struct pci_child_platdata *pplat; - struct pci_controller *ctlr_hose; - - pplat = dev_get_parent_platdata(dev); unsigned int max_bus; - pci_dev_t bdf; - bdf = PCI_ADD_BUS(bus->seq, pplat->devfn); debug("%s: device %s\n", __func__, dev->name); - - /* The root controller has the region information */ - ctlr_hose = hose->ctlr->uclass_priv; - max_bus = pciauto_config_device(ctlr_hose, bdf); + max_bus = pciauto_config_device(hose, pci_get_bdf(dev)); sub_bus = max(sub_bus, max_bus); } debug("%s: done\n", __func__); @@ -325,7 +322,7 @@ int dm_pci_hose_probe_bus(struct pci_controller *hose, pci_dev_t bdf) parent = hose->bus; /* Find the bus within the parent */ - ret = pci_bus_find_devfn(parent, bdf, &bus); + ret = pci_bus_find_devfn(parent, PCI_MASK_BUS(bdf), &bus); if (ret) { debug("%s: Cannot find device %x on bus %s: %d\n", __func__, bdf, parent->name, ret); @@ -353,66 +350,171 @@ int dm_pci_hose_probe_bus(struct pci_controller *hose, pci_dev_t bdf) return sub_bus; } +/** + * pci_match_one_device - Tell if a PCI device structure has a matching + * PCI device id structure + * @id: single PCI device id structure to match + * @dev: the PCI device structure to match against + * + * Returns the matching pci_device_id structure or %NULL if there is no match. + */ +static bool pci_match_one_id(const struct pci_device_id *id, + const struct pci_device_id *find) +{ + if ((id->vendor == PCI_ANY_ID || id->vendor == find->vendor) && + (id->device == PCI_ANY_ID || id->device == find->device) && + (id->subvendor == PCI_ANY_ID || id->subvendor == find->subvendor) && + (id->subdevice == PCI_ANY_ID || id->subdevice == find->subdevice) && + !((id->class ^ find->class) & id->class_mask)) + return true; + + return false; +} + +/** + * pci_find_and_bind_driver() - Find and bind the right PCI driver + * + * This only looks at certain fields in the descriptor. + */ +static int pci_find_and_bind_driver(struct udevice *parent, + struct pci_device_id *find_id, pci_dev_t bdf, + struct udevice **devp) +{ + struct pci_driver_entry *start, *entry; + const char *drv; + int n_ents; + int ret; + char name[30], *str; + + *devp = NULL; + + debug("%s: Searching for driver: vendor=%x, device=%x\n", __func__, + find_id->vendor, find_id->device); + start = ll_entry_start(struct pci_driver_entry, pci_driver_entry); + n_ents = ll_entry_count(struct pci_driver_entry, pci_driver_entry); + for (entry = start; entry != start + n_ents; entry++) { + const struct pci_device_id *id; + struct udevice *dev; + const struct driver *drv; + + for (id = entry->match; + id->vendor || id->subvendor || id->class_mask; + id++) { + if (!pci_match_one_id(id, find_id)) + continue; + + drv = entry->driver; + /* + * We could pass the descriptor to the driver as + * platdata (instead of NULL) and allow its bind() + * method to return -ENOENT if it doesn't support this + * device. That way we could continue the search to + * find another driver. For now this doesn't seem + * necesssary, so just bind the first match. + */ + ret = device_bind(parent, drv, drv->name, NULL, -1, + &dev); + if (ret) + goto error; + debug("%s: Match found: %s\n", __func__, drv->name); + dev->driver_data = find_id->driver_data; + *devp = dev; + return 0; + } + } + + /* Bind a generic driver so that the device can be used */ + sprintf(name, "pci_%x:%x.%x", parent->seq, PCI_DEV(bdf), + PCI_FUNC(bdf)); + str = strdup(name); + if (!str) + return -ENOMEM; + drv = (find_id->class >> 8) == PCI_CLASS_BRIDGE_PCI ? "pci_bridge_drv" : + "pci_generic_drv"; + ret = device_bind_driver(parent, drv, str, devp); + if (ret) { + debug("%s: Failed to bind generic driver: %d", __func__, ret); + return ret; + } + debug("%s: No match found: bound generic driver instead\n", __func__); + + return 0; + +error: + debug("%s: No match found: error %d\n", __func__, ret); + return ret; +} + int pci_bind_bus_devices(struct udevice *bus) { ulong vendor, device; ulong header_type; - pci_dev_t devfn, end; + pci_dev_t bdf, end; bool found_multi; int ret; found_multi = false; - end = PCI_DEVFN(PCI_MAX_PCI_DEVICES - 1, PCI_MAX_PCI_FUNCTIONS - 1); - for (devfn = PCI_DEVFN(0, 0); devfn < end; devfn += PCI_DEVFN(0, 1)) { + end = PCI_BDF(bus->seq, PCI_MAX_PCI_DEVICES - 1, + PCI_MAX_PCI_FUNCTIONS - 1); + for (bdf = PCI_BDF(bus->seq, 0, 0); bdf < end; + bdf += PCI_BDF(0, 0, 1)) { struct pci_child_platdata *pplat; struct udevice *dev; ulong class; - if (PCI_FUNC(devfn) && !found_multi) + if (PCI_FUNC(bdf) && !found_multi) continue; /* Check only the first access, we don't expect problems */ - ret = pci_bus_read_config(bus, devfn, PCI_HEADER_TYPE, + ret = pci_bus_read_config(bus, bdf, PCI_HEADER_TYPE, &header_type, PCI_SIZE_8); if (ret) goto error; - pci_bus_read_config(bus, devfn, PCI_VENDOR_ID, &vendor, + pci_bus_read_config(bus, bdf, PCI_VENDOR_ID, &vendor, PCI_SIZE_16); if (vendor == 0xffff || vendor == 0x0000) continue; - if (!PCI_FUNC(devfn)) + if (!PCI_FUNC(bdf)) found_multi = header_type & 0x80; debug("%s: bus %d/%s: found device %x, function %d\n", __func__, - bus->seq, bus->name, PCI_DEV(devfn), PCI_FUNC(devfn)); - pci_bus_read_config(bus, devfn, PCI_DEVICE_ID, &device, - PCI_SIZE_16); - pci_bus_read_config(bus, devfn, PCI_CLASS_DEVICE, &class, + bus->seq, bus->name, PCI_DEV(bdf), PCI_FUNC(bdf)); + pci_bus_read_config(bus, bdf, PCI_DEVICE_ID, &device, PCI_SIZE_16); + pci_bus_read_config(bus, bdf, PCI_CLASS_REVISION, &class, + PCI_SIZE_32); + class >>= 8; /* Find this device in the device tree */ - ret = pci_bus_find_devfn(bus, devfn, &dev); + ret = pci_bus_find_devfn(bus, PCI_MASK_BUS(bdf), &dev); + + /* Search for a driver */ /* If nothing in the device tree, bind a generic device */ if (ret == -ENODEV) { - char name[30], *str; - const char *drv; - - sprintf(name, "pci_%x:%x.%x", bus->seq, - PCI_DEV(devfn), PCI_FUNC(devfn)); - str = strdup(name); - if (!str) - return -ENOMEM; - drv = class == PCI_CLASS_BRIDGE_PCI ? - "pci_bridge_drv" : "pci_generic_drv"; - ret = device_bind_driver(bus, drv, str, &dev); + struct pci_device_id find_id; + ulong val; + + memset(&find_id, '\0', sizeof(find_id)); + find_id.vendor = vendor; + find_id.device = device; + find_id.class = class; + if ((header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL) { + pci_bus_read_config(bus, bdf, + PCI_SUBSYSTEM_VENDOR_ID, + &val, PCI_SIZE_32); + find_id.subvendor = val & 0xffff; + find_id.subdevice = val >> 16; + } + ret = pci_find_and_bind_driver(bus, &find_id, bdf, + &dev); } if (ret) return ret; /* Update the platform data */ pplat = dev_get_parent_platdata(dev); - pplat->devfn = devfn; + pplat->devfn = PCI_MASK_BUS(bdf); pplat->vendor = vendor; pplat->device = device; pplat->class = class; @@ -583,20 +685,20 @@ static int pci_uclass_child_post_bind(struct udevice *dev) return 0; } -int pci_bridge_read_config(struct udevice *bus, pci_dev_t devfn, uint offset, - ulong *valuep, enum pci_size_t size) +static int pci_bridge_read_config(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong *valuep, + enum pci_size_t size) { struct pci_controller *hose = bus->uclass_priv; - pci_dev_t bdf = PCI_ADD_BUS(bus->seq, devfn); return pci_bus_read_config(hose->ctlr, bdf, offset, valuep, size); } -int pci_bridge_write_config(struct udevice *bus, pci_dev_t devfn, uint offset, - ulong value, enum pci_size_t size) +static int pci_bridge_write_config(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong value, + enum pci_size_t size) { struct pci_controller *hose = bus->uclass_priv; - pci_dev_t bdf = PCI_ADD_BUS(bus->seq, devfn); return pci_bus_write_config(hose->ctlr, bdf, offset, value, size); } diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index e034ed1..a7af8cb 100644 --- a/drivers/pci/pci_auto.c +++ b/drivers/pci/pci_auto.c @@ -213,21 +213,39 @@ void pciauto_setup_device(struct pci_controller *hose, void pciauto_prescan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus) { - struct pci_region *pci_mem = hose->pci_mem; - struct pci_region *pci_prefetch = hose->pci_prefetch; - struct pci_region *pci_io = hose->pci_io; + struct pci_region *pci_mem; + struct pci_region *pci_prefetch; + struct pci_region *pci_io; u16 cmdstat, prefechable_64; +#ifdef CONFIG_DM_PCI + /* The root controller has the region information */ + struct pci_controller *ctlr_hose = pci_bus_to_hose(0); + + pci_mem = ctlr_hose->pci_mem; + pci_prefetch = ctlr_hose->pci_prefetch; + pci_io = ctlr_hose->pci_io; +#else + pci_mem = hose->pci_mem; + pci_prefetch = hose->pci_prefetch; + pci_io = hose->pci_io; +#endif + pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat); pci_hose_read_config_word(hose, dev, PCI_PREF_MEMORY_BASE, &prefechable_64); prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK; /* Configure bus number registers */ +#ifdef CONFIG_DM_PCI + pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS, PCI_BUS(dev)); + pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS, sub_bus); +#else pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS, PCI_BUS(dev) - hose->first_busno); pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS, sub_bus - hose->first_busno); +#endif pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff); if (pci_mem) { @@ -290,13 +308,30 @@ void pciauto_prescan_setup_bridge(struct pci_controller *hose, void pciauto_postscan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus) { - struct pci_region *pci_mem = hose->pci_mem; - struct pci_region *pci_prefetch = hose->pci_prefetch; - struct pci_region *pci_io = hose->pci_io; + struct pci_region *pci_mem; + struct pci_region *pci_prefetch; + struct pci_region *pci_io; + +#ifdef CONFIG_DM_PCI + /* The root controller has the region information */ + struct pci_controller *ctlr_hose = pci_bus_to_hose(0); + + pci_mem = ctlr_hose->pci_mem; + pci_prefetch = ctlr_hose->pci_prefetch; + pci_io = ctlr_hose->pci_io; +#else + pci_mem = hose->pci_mem; + pci_prefetch = hose->pci_prefetch; + pci_io = hose->pci_io; +#endif /* Configure bus number registers */ +#ifdef CONFIG_DM_PCI + pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, sub_bus); +#else pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, sub_bus - hose->first_busno); +#endif if (pci_mem) { /* Round memory allocator to 1MB boundary */ @@ -416,10 +451,26 @@ void pciauto_config_init(struct pci_controller *hose) */ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) { + struct pci_region *pci_mem; + struct pci_region *pci_prefetch; + struct pci_region *pci_io; unsigned int sub_bus = PCI_BUS(dev); unsigned short class; int n; +#ifdef CONFIG_DM_PCI + /* The root controller has the region information */ + struct pci_controller *ctlr_hose = pci_bus_to_hose(0); + + pci_mem = ctlr_hose->pci_mem; + pci_prefetch = ctlr_hose->pci_prefetch; + pci_io = ctlr_hose->pci_io; +#else + pci_mem = hose->pci_mem; + pci_prefetch = hose->pci_prefetch; + pci_io = hose->pci_io; +#endif + pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class); switch (class) { @@ -427,8 +478,8 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev)); - pciauto_setup_device(hose, dev, 2, hose->pci_mem, - hose->pci_prefetch, hose->pci_io); + pciauto_setup_device(hose, dev, 2, pci_mem, + pci_prefetch, pci_io); #ifdef CONFIG_DM_PCI n = dm_pci_hose_probe_bus(hose, dev); @@ -458,8 +509,8 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) * just do a minimal setup of the bridge, * let the OS take care of the rest */ - pciauto_setup_device(hose, dev, 0, hose->pci_mem, - hose->pci_prefetch, hose->pci_io); + pciauto_setup_device(hose, dev, 0, pci_mem, + pci_prefetch, pci_io); DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", PCI_DEV(dev)); @@ -493,8 +544,8 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) DEBUGF("PCI AutoConfig: Found PowerPC device\n"); default: - pciauto_setup_device(hose, dev, 6, hose->pci_mem, - hose->pci_prefetch, hose->pci_io); + pciauto_setup_device(hose, dev, 6, pci_mem, + pci_prefetch, pci_io); break; } diff --git a/drivers/pci/pci_common.c b/drivers/pci/pci_common.c index f67c9c7..07f1726 100644 --- a/drivers/pci/pci_common.c +++ b/drivers/pci/pci_common.c @@ -224,7 +224,7 @@ phys_addr_t pci_hose_bus_to_phys(struct pci_controller *hose, #ifdef CONFIG_DM_PCI /* The root controller has the region information */ - hose = hose->ctlr->uclass_priv; + hose = pci_bus_to_hose(0); #endif /* @@ -289,6 +289,11 @@ pci_addr_t pci_hose_phys_to_bus(struct pci_controller *hose, return bus_addr; } +#ifdef CONFIG_DM_PCI + /* The root controller has the region information */ + hose = pci_bus_to_hose(0); +#endif + /* * if PCI_REGION_MEM is set we do a two pass search with preference * on matches that don't have PCI_REGION_SYS_MEMORY set diff --git a/drivers/pci/pci_compat.c b/drivers/pci/pci_compat.c index d6938c1..05c3510 100644 --- a/drivers/pci/pci_compat.c +++ b/drivers/pci/pci_compat.c @@ -31,13 +31,9 @@ PCI_HOSE_OP(write, dword, 32, u32) pci_dev_t pci_find_devices(struct pci_device_id *ids, int index) { - struct pci_child_platdata *pplat; - struct udevice *bus, *dev; + struct udevice *dev; if (pci_find_device_id(ids, index, &dev)) return -1; - bus = dev->parent; - pplat = dev_get_parent_platdata(dev); - - return PCI_ADD_BUS(bus->seq, pplat->devfn); + return pci_get_bdf(dev); } diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c index 402c519..3ef4975 100644 --- a/drivers/pci/pcie_layerscape.c +++ b/drivers/pci/pcie_layerscape.c @@ -11,6 +11,7 @@ #include <asm/io.h> #include <errno.h> #include <malloc.h> +#include <asm/arch-fsl-lsch3/fdt.h> #ifndef CONFIG_SYS_PCI_MEMORY_BUS #define CONFIG_SYS_PCI_MEMORY_BUS CONFIG_SYS_SDRAM_BASE @@ -528,3 +529,64 @@ void ft_pci_setup(void *blob, bd_t *bd) { } #endif + +#ifdef CONFIG_LS2085A + +void pcie_set_available_streamids(void *blob, const char *pcie_path, + u32 *stream_ids, int count) +{ + int nodeoffset; + int i; + + nodeoffset = fdt_path_offset(blob, pcie_path); + if (nodeoffset < 0) { + printf("\n%s: ERROR: unable to update PCIe node\n", __func__); + return; + } + + /* for each stream ID, append to mmu-masters */ + for (i = 0; i < count; i++) { + fdt_appendprop_u32(blob, nodeoffset, "available-stream-ids", + stream_ids[i]); + } +} + +#define MAX_STREAM_IDS 4 +void fdt_fixup_smmu_pcie(void *blob) +{ + int count; + u32 stream_ids[MAX_STREAM_IDS]; + + #ifdef CONFIG_PCIE1 + /* PEX1 stream ID fixup */ + count = FSL_PEX1_STREAM_ID_END - FSL_PEX1_STREAM_ID_START + 1; + alloc_stream_ids(FSL_PEX1_STREAM_ID_START, count, stream_ids, + MAX_STREAM_IDS); + pcie_set_available_streamids(blob, "/pcie@3400000", stream_ids, count); + #endif + + #ifdef CONFIG_PCIE2 + /* PEX2 stream ID fixup */ + count = FSL_PEX2_STREAM_ID_END - FSL_PEX2_STREAM_ID_START + 1; + alloc_stream_ids(FSL_PEX2_STREAM_ID_START, count, stream_ids, + MAX_STREAM_IDS); + pcie_set_available_streamids(blob, "/pcie@3500000", stream_ids, count); + #endif + + #ifdef CONFIG_PCIE3 + /* PEX3 stream ID fixup */ + count = FSL_PEX3_STREAM_ID_END - FSL_PEX3_STREAM_ID_START + 1; + alloc_stream_ids(FSL_PEX3_STREAM_ID_START, count, stream_ids, + MAX_STREAM_IDS); + pcie_set_available_streamids(blob, "/pcie@3600000", stream_ids, count); + #endif + + #ifdef CONFIG_PCIE4 + /* PEX4 stream ID fixup */ + count = FSL_PEX4_STREAM_ID_END - FSL_PEX4_STREAM_ID_START + 1; + alloc_stream_ids(FSL_PEX4_STREAM_ID_START, count, stream_ids, + MAX_STREAM_IDS); + pcie_set_available_streamids(blob, "/pcie@3700000", stream_ids, count); + #endif +} +#endif diff --git a/drivers/power/pmic/pmic-uclass.c b/drivers/power/pmic/pmic-uclass.c index 812ac13..d99cb9a 100644 --- a/drivers/power/pmic/pmic-uclass.c +++ b/drivers/power/pmic/pmic-uclass.c @@ -9,6 +9,7 @@ #include <fdtdec.h> #include <errno.h> #include <dm.h> +#include <vsprintf.h> #include <dm/lists.h> #include <dm/device-internal.h> #include <dm/uclass-internal.h> @@ -17,16 +18,6 @@ DECLARE_GLOBAL_DATA_PTR; -static ulong str_get_num(const char *ptr, const char *maxptr) -{ - if (!ptr || !maxptr) - return 0; - - while (!isdigit(*ptr) && ptr++ < maxptr); - - return simple_strtoul(ptr, NULL, 0); -} - int pmic_bind_children(struct udevice *pmic, int offset, const struct pmic_child_info *child_info) { @@ -35,7 +26,6 @@ int pmic_bind_children(struct udevice *pmic, int offset, struct driver *drv; struct udevice *child; const char *node_name; - int node_name_len; int bind_count = 0; int node; int prefix_len; @@ -47,19 +37,19 @@ int pmic_bind_children(struct udevice *pmic, int offset, for (node = fdt_first_subnode(blob, offset); node > 0; node = fdt_next_subnode(blob, node)) { - node_name = fdt_get_name(blob, node, &node_name_len); + node_name = fdt_get_name(blob, node, NULL); debug("* Found child node: '%s' at offset:%d\n", node_name, node); child = NULL; for (info = child_info; info->prefix && info->driver; info++) { + debug(" - compatible prefix: '%s'\n", info->prefix); + prefix_len = strlen(info->prefix); - if (strncasecmp(info->prefix, node_name, prefix_len)) + if (strncmp(info->prefix, node_name, prefix_len)) continue; - debug(" - compatible prefix: '%s'\n", info->prefix); - drv = lists_driver_lookup_name(info->driver); if (!drv) { debug(" - driver: '%s' not found!\n", @@ -78,10 +68,7 @@ int pmic_bind_children(struct udevice *pmic, int offset, debug(" - bound child device: '%s'\n", child->name); - child->driver_data = str_get_num(node_name + - prefix_len, - node_name + - node_name_len); + child->driver_data = trailing_strtol(node_name); debug(" - set 'child->driver_data': %lu\n", child->driver_data); @@ -139,6 +126,38 @@ int pmic_write(struct udevice *dev, uint reg, const uint8_t *buffer, int len) return ops->write(dev, reg, buffer, len); } +int pmic_reg_read(struct udevice *dev, uint reg) +{ + u8 byte; + int ret; + + ret = pmic_read(dev, reg, &byte, 1); + debug("%s: reg=%x, value=%x\n", __func__, reg, byte); + + return ret ? ret : byte; +} + +int pmic_reg_write(struct udevice *dev, uint reg, uint value) +{ + u8 byte = value; + + debug("%s: reg=%x, value=%x\n", __func__, reg, value); + return pmic_read(dev, reg, &byte, 1); +} + +int pmic_clrsetbits(struct udevice *dev, uint reg, uint clr, uint set) +{ + u8 byte; + int ret; + + ret = pmic_reg_read(dev, reg); + if (ret < 0) + return ret; + byte = (ret & ~clr) | set; + + return pmic_reg_write(dev, reg, byte); +} + UCLASS_DRIVER(pmic) = { .id = UCLASS_PMIC, .name = "pmic", diff --git a/drivers/power/regulator/regulator-uclass.c b/drivers/power/regulator/regulator-uclass.c index 31ffd44..12e141b 100644 --- a/drivers/power/regulator/regulator-uclass.c +++ b/drivers/power/regulator/regulator-uclass.c @@ -138,87 +138,57 @@ int regulator_get_by_devname(const char *devname, struct udevice **devp) return uclass_get_device_by_name(UCLASS_REGULATOR, devname, devp); } -static int failed(int ret, bool verbose, const char *fmt, ...) +int regulator_autoset(struct udevice *dev) { - va_list args; - char buf[64]; - - if (verbose == false) - return ret; + struct dm_regulator_uclass_platdata *uc_pdata; + int ret = 0; - va_start(args, fmt); - vscnprintf(buf, sizeof(buf), fmt, args); - va_end(args); + uc_pdata = dev_get_uclass_platdata(dev); + if (!uc_pdata->always_on && !uc_pdata->boot_on) + return -EMEDIUMTYPE; - printf(buf); + if (uc_pdata->flags & REGULATOR_FLAG_AUTOSET_UV) + ret = regulator_set_value(dev, uc_pdata->min_uV); + if (!ret && (uc_pdata->flags & REGULATOR_FLAG_AUTOSET_UA)) + ret = regulator_set_current(dev, uc_pdata->min_uA); if (!ret) - return 0; - - printf(" (ret: %d)", ret); + ret = regulator_set_enable(dev, true); return ret; } -int regulator_autoset(const char *platname, - struct udevice **devp, - bool verbose) +static void regulator_show(struct udevice *dev, int ret) { struct dm_regulator_uclass_platdata *uc_pdata; - struct udevice *dev; - int ret; - - if (devp) - *devp = NULL; - - ret = regulator_get_by_platname(platname, &dev); - if (ret) { - error("Can get the regulator: %s!", platname); - return ret; - } uc_pdata = dev_get_uclass_platdata(dev); - if (!uc_pdata) { - error("Can get the regulator %s uclass platdata!", platname); - return -ENXIO; - } - if (!uc_pdata->always_on && !uc_pdata->boot_on) - goto retdev; - - if (verbose) - printf("%s@%s: ", dev->name, uc_pdata->name); - - /* Those values are optional (-ENODATA if unset) */ - if ((uc_pdata->min_uV != -ENODATA) && - (uc_pdata->max_uV != -ENODATA) && - (uc_pdata->min_uV == uc_pdata->max_uV)) { - ret = regulator_set_value(dev, uc_pdata->min_uV); - if (failed(ret, verbose, "set %d uV", uc_pdata->min_uV)) - goto exit; - } - - /* Those values are optional (-ENODATA if unset) */ - if ((uc_pdata->min_uA != -ENODATA) && - (uc_pdata->max_uA != -ENODATA) && - (uc_pdata->min_uA == uc_pdata->max_uA)) { - ret = regulator_set_current(dev, uc_pdata->min_uA); - if (failed(ret, verbose, "; set %d uA", uc_pdata->min_uA)) - goto exit; - } + printf("%s@%s: ", dev->name, uc_pdata->name); + if (uc_pdata->flags & REGULATOR_FLAG_AUTOSET_UV) + printf("set %d uV", uc_pdata->min_uV); + if (uc_pdata->flags & REGULATOR_FLAG_AUTOSET_UA) + printf("; set %d uA", uc_pdata->min_uA); + printf("; enabling"); + if (ret) + printf(" (ret: %d)\n", ret); + printf("\n"); +} - ret = regulator_set_enable(dev, true); - if (failed(ret, verbose, "; enabling", uc_pdata->min_uA)) - goto exit; +int regulator_autoset_by_name(const char *platname, struct udevice **devp) +{ + struct udevice *dev; + int ret; -retdev: + ret = regulator_get_by_platname(platname, &dev); if (devp) *devp = dev; -exit: - if (verbose) - printf("\n"); + if (ret) { + debug("Can get the regulator: %s!", platname); + return ret; + } - return ret; + return regulator_autoset(dev); } int regulator_list_autoset(const char *list_platname[], @@ -229,7 +199,9 @@ int regulator_list_autoset(const char *list_platname[], int error = 0, i = 0, ret; while (list_platname[i]) { - ret = regulator_autoset(list_platname[i], &dev, verbose); + ret = regulator_autoset_by_name(list_platname[i], &dev); + if (ret != -EMEDIUMTYPE && verbose) + regulator_show(dev, ret); if (ret & !error) error = ret; @@ -290,7 +262,7 @@ static int regulator_post_bind(struct udevice *dev) if (regulator_name_is_unique(dev, uc_pdata->name)) return 0; - error("\"%s\" of dev: \"%s\", has nonunique value: \"%s\"", + debug("\"%s\" of dev: \"%s\", has nonunique value: \"%s\"", property, dev->name, uc_pdata->name); return -EINVAL; @@ -319,9 +291,43 @@ static int regulator_pre_probe(struct udevice *dev) uc_pdata->boot_on = fdtdec_get_bool(gd->fdt_blob, offset, "regulator-boot-on"); + /* Those values are optional (-ENODATA if unset) */ + if ((uc_pdata->min_uV != -ENODATA) && + (uc_pdata->max_uV != -ENODATA) && + (uc_pdata->min_uV == uc_pdata->max_uV)) + uc_pdata->flags |= REGULATOR_FLAG_AUTOSET_UV; + + /* Those values are optional (-ENODATA if unset) */ + if ((uc_pdata->min_uA != -ENODATA) && + (uc_pdata->max_uA != -ENODATA) && + (uc_pdata->min_uA == uc_pdata->max_uA)) + uc_pdata->flags |= REGULATOR_FLAG_AUTOSET_UA; + return 0; } +int regulators_enable_boot_on(bool verbose) +{ + struct udevice *dev; + struct uclass *uc; + int ret; + + ret = uclass_get(UCLASS_REGULATOR, &uc); + if (ret) + return ret; + for (uclass_first_device(UCLASS_REGULATOR, &dev); + dev && !ret; + uclass_next_device(&dev)) { + ret = regulator_autoset(dev); + if (ret == -EMEDIUMTYPE) + continue; + if (verbose) + regulator_show(dev, ret); + } + + return ret; +} + UCLASS_DRIVER(regulator) = { .id = UCLASS_REGULATOR, .name = "regulator", diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig new file mode 100644 index 0000000..642a2d8 --- /dev/null +++ b/drivers/ram/Kconfig @@ -0,0 +1,18 @@ +config RAM + bool "Enable RAM drivers using Driver Model" + depends on DM + help + This allows drivers to be provided for SDRAM and other RAM + controllers and their type to be specified in the board's device + tree. Generally some parameters are required to set up the RAM and + the RAM size can either be statically defined or dynamically + detected. + +config SPL_RAM_SUPPORT + bool "Enable RAM support in SPL" + depends on RAM + help + The RAM subsystem adds a small amount of overhead to the image. + If this is acceptable and you have a need to use RAM drivers in + SPL, enable this option. It might provide a cleaner interface to + setting up RAM (e.g. SDRAM / DDR) within SPL. diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile new file mode 100644 index 0000000..0e10249 --- /dev/null +++ b/drivers/ram/Makefile @@ -0,0 +1,8 @@ +# +# Copyright (c) 2015 Google, Inc +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# +obj-$(CONFIG_RAM) += ram-uclass.o +obj-$(CONFIG_SANDBOX) += sandbox_ram.o diff --git a/drivers/ram/ram-uclass.c b/drivers/ram/ram-uclass.c new file mode 100644 index 0000000..2f1fbe7 --- /dev/null +++ b/drivers/ram/ram-uclass.c @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <ram.h> +#include <dm.h> +#include <errno.h> +#include <dm/lists.h> +#include <dm/root.h> + +int ram_get_info(struct udevice *dev, struct ram_info *info) +{ + struct ram_ops *ops = ram_get_ops(dev); + + if (!ops->get_info) + return -ENOSYS; + + return ops->get_info(dev, info); +} + +UCLASS_DRIVER(ram) = { + .id = UCLASS_RAM, + .name = "ram", +}; diff --git a/drivers/ram/sandbox_ram.c b/drivers/ram/sandbox_ram.c new file mode 100644 index 0000000..06bf3ec --- /dev/null +++ b/drivers/ram/sandbox_ram.c @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <ram.h> +#include <asm/test.h> + +DECLARE_GLOBAL_DATA_PTR; + +static int sandbox_get_info(struct udevice *dev, struct ram_info *info) +{ + info->base = 0; + info->size = gd->ram_size; + + return 0; +} + +static const struct ram_ops sandbox_ram_ops = { + .get_info = sandbox_get_info, +}; + +static const struct udevice_id sandbox_ram_ids[] = { + { .compatible = "sandbox,ram" }, + { } +}; + +U_BOOT_DRIVER(warm_ram_sandbox) = { + .name = "ram_sandbox", + .id = UCLASS_RAM, + .of_match = sandbox_ram_ids, + .ops = &sandbox_ram_ops, +}; diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 9b044a3..c8a77e2 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -246,6 +246,17 @@ int NS16550_tstc(NS16550_t com_port) #include <debug_uart.h> +#define serial_dout(reg, value) \ + serial_out_shift((char *)com_port + \ + ((char *)reg - (char *)com_port) * \ + (1 << CONFIG_DEBUG_UART_SHIFT), \ + CONFIG_DEBUG_UART_SHIFT, value) +#define serial_din(reg) \ + serial_in_shift((char *)com_port + \ + ((char *)reg - (char *)com_port) * \ + (1 << CONFIG_DEBUG_UART_SHIFT), \ + CONFIG_DEBUG_UART_SHIFT) + void debug_uart_init(void) { struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; @@ -259,28 +270,23 @@ void debug_uart_init(void) */ baud_divisor = calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); - serial_out_shift(&com_port->ier, CONFIG_DEBUG_UART_SHIFT, - CONFIG_SYS_NS16550_IER); - serial_out_shift(&com_port->mcr, CONFIG_DEBUG_UART_SHIFT, UART_MCRVAL); - serial_out_shift(&com_port->fcr, CONFIG_DEBUG_UART_SHIFT, UART_FCRVAL); - - serial_out_shift(&com_port->lcr, CONFIG_DEBUG_UART_SHIFT, - UART_LCR_BKSE | UART_LCRVAL); - serial_out_shift(&com_port->dll, CONFIG_DEBUG_UART_SHIFT, - baud_divisor & 0xff); - serial_out_shift(&com_port->dlm, CONFIG_DEBUG_UART_SHIFT, - (baud_divisor >> 8) & 0xff); - serial_out_shift(&com_port->lcr, CONFIG_DEBUG_UART_SHIFT, - UART_LCRVAL); + serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER); + serial_dout(&com_port->mcr, UART_MCRVAL); + serial_dout(&com_port->fcr, UART_FCRVAL); + + serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL); + serial_dout(&com_port->dll, baud_divisor & 0xff); + serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff); + serial_dout(&com_port->lcr, UART_LCRVAL); } static inline void _debug_uart_putc(int ch) { struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; - while (!(serial_in_shift(&com_port->lsr, 0) & UART_LSR_THRE)) + while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) ; - serial_out_shift(&com_port->thr, CONFIG_DEBUG_UART_SHIFT, ch); + serial_dout(&com_port->thr, ch); } DEBUG_UART_FUNCS diff --git a/drivers/spi/fsl_dspi.c b/drivers/spi/fsl_dspi.c index 6476f91..7928531 100644 --- a/drivers/spi/fsl_dspi.c +++ b/drivers/spi/fsl_dspi.c @@ -664,8 +664,8 @@ static int fsl_dspi_ofdata_to_platdata(struct udevice *bus) plat->speed_hz = fdtdec_get_int(blob, node, "spi-max-frequency", FSL_DSPI_DEFAULT_SCK_FREQ); - debug("DSPI: regs=0x%x, max-frequency=%d, endianess=%s, num-cs=%d\n", - plat->regs_addr, plat->speed_hz, + debug("DSPI: regs=0x%llx, max-frequency=%d, endianess=%s, num-cs=%d\n", + (u64)plat->regs_addr, plat->speed_hz, plat->flags & DSPI_FLAG_REGMAP_ENDIAN_BIG ? "be" : "le", plat->num_chipselect); diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c index 737ae64..d666272 100644 --- a/drivers/spi/spi-uclass.c +++ b/drivers/spi/spi-uclass.c @@ -95,13 +95,13 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, return spi_get_ops(bus)->xfer(dev, bitlen, dout, din, flags); } -int spi_post_bind(struct udevice *dev) +static int spi_post_bind(struct udevice *dev) { /* Scan the bus for devices */ return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false); } -int spi_child_post_bind(struct udevice *dev) +static int spi_child_post_bind(struct udevice *dev) { struct dm_spi_slave_platdata *plat = dev_get_parent_platdata(dev); @@ -111,7 +111,7 @@ int spi_child_post_bind(struct udevice *dev) return spi_slave_ofdata_to_platdata(gd->fdt_blob, dev->of_offset, plat); } -int spi_post_probe(struct udevice *bus) +static int spi_post_probe(struct udevice *bus) { struct dm_spi_bus *spi = dev_get_uclass_priv(bus); @@ -121,7 +121,7 @@ int spi_post_probe(struct udevice *bus) return 0; } -int spi_child_pre_probe(struct udevice *dev) +static int spi_child_pre_probe(struct udevice *dev) { struct dm_spi_slave_platdata *plat = dev_get_parent_platdata(dev); struct spi_slave *slave = dev_get_parentdata(dev); diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c index c5c3e10..7ae1f0e 100644 --- a/drivers/spi/zynq_spi.c +++ b/drivers/spi/zynq_spi.c @@ -79,7 +79,7 @@ static int zynq_spi_ofdata_to_platdata(struct udevice *bus) 250000000); plat->speed_hz = plat->frequency / 2; - debug("zynq_spi_ofdata_to_platdata: regs=%p max-frequency=%d\n", + debug("%s: regs=%p max-frequency=%d\n", __func__, plat->regs, plat->frequency); return 0; @@ -309,7 +309,7 @@ static const struct dm_spi_ops zynq_spi_ops = { }; static const struct udevice_id zynq_spi_ids[] = { - { .compatible = "xlnx,zynq-spi" }, + { .compatible = "xlnx,zynq-spi-r1p6" }, { } }; diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index f13a088..716dad4 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -47,8 +47,8 @@ config DM_USB Much of the code is shared but with this option enabled the USB uclass takes care of device enumeration. USB devices can be - declared with the USB_DEVICE() macro and will be automatically - probed when found on the bus. + declared with the U_BOOT_USB_DEVICE() macro and will be + automatically probed when found on the bus. source "drivers/usb/host/Kconfig" diff --git a/drivers/usb/eth/asix.c b/drivers/usb/eth/asix.c index c8697ae..72ec41e 100644 --- a/drivers/usb/eth/asix.c +++ b/drivers/usb/eth/asix.c @@ -5,11 +5,11 @@ */ #include <common.h> +#include <dm.h> #include <usb.h> +#include <malloc.h> #include <linux/mii.h> #include "usb_ether.h" -#include <malloc.h> - /* ASIX AX8817X based USB 2.0 Ethernet Devices */ @@ -92,14 +92,20 @@ #define FLAG_TYPE_AX88772B (1U << 2) #define FLAG_EEPROM_MAC (1U << 3) /* initial mac address in eeprom */ -/* local vars */ -static int curr_eth_dev; /* index for name of next device detected */ /* driver private */ struct asix_private { int flags; +#ifdef CONFIG_DM_ETH + struct ueth_data ueth; +#endif }; +#ifndef CONFIG_DM_ETH +/* local vars */ +static int curr_eth_dev; /* index for name of next device detected */ +#endif + /* * Asix infrastructure commands */ @@ -284,13 +290,12 @@ static int asix_write_gpio(struct ueth_data *dev, u16 value, int sleep) return ret; } -static int asix_write_hwaddr(struct eth_device *eth) +static int asix_write_hwaddr_common(struct ueth_data *dev, uint8_t *enetaddr) { - struct ueth_data *dev = (struct ueth_data *)eth->priv; int ret; ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, ETH_ALEN); - memcpy(buf, eth->enetaddr, ETH_ALEN); + memcpy(buf, enetaddr, ETH_ALEN); ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, buf); if (ret < 0) @@ -325,12 +330,11 @@ static int mii_nway_restart(struct ueth_data *dev) return r; } -static int asix_read_mac(struct eth_device *eth) +static int asix_read_mac_common(struct ueth_data *dev, + struct asix_private *priv, uint8_t *enetaddr) { - struct ueth_data *dev = (struct ueth_data *)eth->priv; - struct asix_private *priv = (struct asix_private *)dev->dev_priv; - int i; ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, ETH_ALEN); + int i; if (priv->flags & FLAG_EEPROM_MAC) { for (i = 0; i < (ETH_ALEN >> 1); i++) { @@ -339,7 +343,7 @@ static int asix_read_mac(struct eth_device *eth) debug("Failed to read SROM address 04h.\n"); return -1; } - memcpy((eth->enetaddr + i * 2), buf, 2); + memcpy(enetaddr + i * 2, buf, 2); } } else { if (asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf) @@ -347,7 +351,7 @@ static int asix_read_mac(struct eth_device *eth) debug("Failed to read MAC address.\n"); return -1; } - memcpy(eth->enetaddr, buf, ETH_ALEN); + memcpy(enetaddr, buf, ETH_ALEN); } return 0; @@ -414,12 +418,8 @@ static int asix_basic_reset(struct ueth_data *dev) return 0; } -/* - * Asix callbacks - */ -static int asix_init(struct eth_device *eth, bd_t *bd) +static int asix_init_common(struct ueth_data *dev) { - struct ueth_data *dev = (struct ueth_data *)eth->priv; int timeout = 0; #define TIMEOUT_RESOLUTION 50 /* ms */ int link_detected; @@ -452,9 +452,8 @@ out_err: return -1; } -static int asix_send(struct eth_device *eth, void *packet, int length) +static int asix_send_common(struct ueth_data *dev, void *packet, int length) { - struct ueth_data *dev = (struct ueth_data *)eth->priv; int err; u32 packet_len; int actual_len; @@ -481,6 +480,24 @@ static int asix_send(struct eth_device *eth, void *packet, int length) return err; } +#ifndef CONFIG_DM_ETH +/* + * Asix callbacks + */ +static int asix_init(struct eth_device *eth, bd_t *bd) +{ + struct ueth_data *dev = (struct ueth_data *)eth->priv; + + return asix_init_common(dev); +} + +static int asix_send(struct eth_device *eth, void *packet, int length) +{ + struct ueth_data *dev = (struct ueth_data *)eth->priv; + + return asix_send_common(dev, packet, length); +} + static int asix_recv(struct eth_device *eth) { struct ueth_data *dev = (struct ueth_data *)eth->priv; @@ -552,6 +569,13 @@ static void asix_halt(struct eth_device *eth) debug("** %s()\n", __func__); } +static int asix_write_hwaddr(struct eth_device *eth) +{ + struct ueth_data *dev = (struct ueth_data *)eth->priv; + + return asix_write_hwaddr_common(dev, eth->enetaddr); +} + /* * Asix probing functions */ @@ -694,9 +718,180 @@ int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss, return 0; /* Get the MAC address */ - if (asix_read_mac(eth)) + if (asix_read_mac_common(ss, priv, eth->enetaddr)) return 0; debug("MAC %pM\n", eth->enetaddr); return 1; } +#endif + +#ifdef CONFIG_DM_ETH +static int asix_eth_start(struct udevice *dev) +{ + struct asix_private *priv = dev_get_priv(dev); + + return asix_init_common(&priv->ueth); +} + +void asix_eth_stop(struct udevice *dev) +{ + debug("** %s()\n", __func__); +} + +int asix_eth_send(struct udevice *dev, void *packet, int length) +{ + struct asix_private *priv = dev_get_priv(dev); + + return asix_send_common(&priv->ueth, packet, length); +} + +int asix_eth_recv(struct udevice *dev, int flags, uchar **packetp) +{ + struct asix_private *priv = dev_get_priv(dev); + struct ueth_data *ueth = &priv->ueth; + uint8_t *ptr; + int ret, len; + u32 packet_len; + + len = usb_ether_get_rx_bytes(ueth, &ptr); + debug("%s: first try, len=%d\n", __func__, len); + if (!len) { + if (!(flags & ETH_RECV_CHECK_DEVICE)) + return -EAGAIN; + ret = usb_ether_receive(ueth, AX_RX_URB_SIZE); + if (ret == -EAGAIN) + return ret; + + len = usb_ether_get_rx_bytes(ueth, &ptr); + debug("%s: second try, len=%d\n", __func__, len); + } + + /* + * 1st 4 bytes contain the length of the actual data as two + * complementary 16-bit words. Extract the length of the data. + */ + if (len < sizeof(packet_len)) { + debug("Rx: incomplete packet length\n"); + goto err; + } + memcpy(&packet_len, ptr, sizeof(packet_len)); + le32_to_cpus(&packet_len); + if (((~packet_len >> 16) & 0x7ff) != (packet_len & 0x7ff)) { + debug("Rx: malformed packet length: %#x (%#x:%#x)\n", + packet_len, (~packet_len >> 16) & 0x7ff, + packet_len & 0x7ff); + goto err; + } + packet_len = packet_len & 0x7ff; + if (packet_len > len - sizeof(packet_len)) { + debug("Rx: too large packet: %d\n", packet_len); + goto err; + } + + *packetp = ptr + sizeof(packet_len); + return packet_len; + +err: + usb_ether_advance_rxbuf(ueth, -1); + return -EINVAL; +} + +static int asix_free_pkt(struct udevice *dev, uchar *packet, int packet_len) +{ + struct asix_private *priv = dev_get_priv(dev); + + if (packet_len & 1) + packet_len++; + usb_ether_advance_rxbuf(&priv->ueth, sizeof(u32) + packet_len); + + return 0; +} + +int asix_write_hwaddr(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_platdata(dev); + struct asix_private *priv = dev_get_priv(dev); + + if (priv->flags & FLAG_TYPE_AX88172) + return -ENOSYS; + + return asix_write_hwaddr_common(&priv->ueth, pdata->enetaddr); +} + +static int asix_eth_probe(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_platdata(dev); + struct asix_private *priv = dev_get_priv(dev); + struct ueth_data *ss = &priv->ueth; + int ret; + + priv->flags = dev->driver_data; + ret = usb_ether_register(dev, ss, AX_RX_URB_SIZE); + if (ret) + return ret; + + ret = asix_basic_reset(ss); + if (ret) + goto err; + + /* Get the MAC address */ + ret = asix_read_mac_common(ss, priv, pdata->enetaddr); + if (ret) + goto err; + debug("MAC %pM\n", pdata->enetaddr); + + return 0; + +err: + return usb_ether_deregister(ss); +} + +static const struct eth_ops asix_eth_ops = { + .start = asix_eth_start, + .send = asix_eth_send, + .recv = asix_eth_recv, + .free_pkt = asix_free_pkt, + .stop = asix_eth_stop, + .write_hwaddr = asix_write_hwaddr, +}; + +U_BOOT_DRIVER(asix_eth) = { + .name = "asix_eth", + .id = UCLASS_ETH, + .probe = asix_eth_probe, + .ops = &asix_eth_ops, + .priv_auto_alloc_size = sizeof(struct asix_private), + .platdata_auto_alloc_size = sizeof(struct eth_pdata), +}; + +static const struct usb_device_id asix_eth_id_table[] = { + /* Apple USB Ethernet Adapter */ + { USB_DEVICE(0x05ac, 0x1402), .driver_info = FLAG_TYPE_AX88772 }, + /* D-Link DUB-E100 H/W Ver B1 */ + { USB_DEVICE(0x07d1, 0x3c05), .driver_info = FLAG_TYPE_AX88772 }, + /* D-Link DUB-E100 H/W Ver C1 */ + { USB_DEVICE(0x2001, 0x1a02), .driver_info = FLAG_TYPE_AX88772 }, + /* Cables-to-Go USB Ethernet Adapter */ + { USB_DEVICE(0x0b95, 0x772a), .driver_info = FLAG_TYPE_AX88772 }, + /* Trendnet TU2-ET100 V3.0R */ + { USB_DEVICE(0x0b95, 0x7720), .driver_info = FLAG_TYPE_AX88772 }, + /* SMC */ + { USB_DEVICE(0x0b95, 0x1720), .driver_info = FLAG_TYPE_AX88172 }, + /* MSI - ASIX 88772a */ + { USB_DEVICE(0x0db0, 0xa877), .driver_info = FLAG_TYPE_AX88772 }, + /* Linksys 200M v2.1 */ + { USB_DEVICE(0x13b1, 0x0018), .driver_info = FLAG_TYPE_AX88172 }, + /* 0Q0 cable ethernet */ + { USB_DEVICE(0x1557, 0x7720), .driver_info = FLAG_TYPE_AX88772 }, + /* DLink DUB-E100 H/W Ver B1 Alternate */ + { USB_DEVICE(0x2001, 0x3c05), .driver_info = FLAG_TYPE_AX88772 }, + /* ASIX 88772B */ + { USB_DEVICE(0x0b95, 0x772b), + .driver_info = FLAG_TYPE_AX88772B | FLAG_EEPROM_MAC }, + { USB_DEVICE(0x0b95, 0x7e2b), .driver_info = FLAG_TYPE_AX88772B }, + { } /* Terminating entry */ +}; + +U_BOOT_USB_DEVICE(asix_eth, asix_eth_id_table); +#endif diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c index c72b7e4..63785a9 100644 --- a/drivers/usb/eth/usb_ether.c +++ b/drivers/usb/eth/usb_ether.c @@ -6,11 +6,137 @@ #include <common.h> #include <dm.h> +#include <malloc.h> #include <usb.h> #include <dm/device-internal.h> #include "usb_ether.h" +#ifdef CONFIG_DM_ETH + +#define USB_BULK_RECV_TIMEOUT 500 + +int usb_ether_register(struct udevice *dev, struct ueth_data *ueth, int rxsize) +{ + struct usb_device *udev = dev_get_parentdata(dev); + struct usb_interface_descriptor *iface_desc; + bool ep_in_found = false, ep_out_found = false; + struct usb_interface *iface; + const int ifnum = 0; /* Always use interface 0 */ + int ret, i; + + iface = &udev->config.if_desc[ifnum]; + iface_desc = &udev->config.if_desc[ifnum].desc; + + /* Initialize the ueth_data structure with some useful info */ + ueth->ifnum = ifnum; + ueth->subclass = iface_desc->bInterfaceSubClass; + ueth->protocol = iface_desc->bInterfaceProtocol; + + /* + * We are expecting a minimum of 3 endpoints - in, out (bulk), and int. + * We will ignore any others. + */ + for (i = 0; i < iface_desc->bNumEndpoints; i++) { + int ep_addr = iface->ep_desc[i].bEndpointAddress; + + /* is it an BULK endpoint? */ + if ((iface->ep_desc[i].bmAttributes & + USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) { + if (ep_addr & USB_DIR_IN && !ep_in_found) { + ueth->ep_in = ep_addr & + USB_ENDPOINT_NUMBER_MASK; + ep_in_found = true; + } else if (!(ep_addr & USB_DIR_IN) && !ep_out_found) { + ueth->ep_out = ep_addr & + USB_ENDPOINT_NUMBER_MASK; + ep_out_found = true; + } + } + + /* is it an interrupt endpoint? */ + if ((iface->ep_desc[i].bmAttributes & + USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { + ueth->ep_int = iface->ep_desc[i].bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK; + ueth->irqinterval = iface->ep_desc[i].bInterval; + } + } + debug("Endpoints In %d Out %d Int %d\n", ueth->ep_in, ueth->ep_out, + ueth->ep_int); + + /* Do some basic sanity checks, and bail if we find a problem */ + if (!ueth->ep_in || !ueth->ep_out || !ueth->ep_int) { + debug("%s: %s: Cannot find endpoints\n", __func__, dev->name); + return -ENXIO; + } + + ueth->rxsize = rxsize; + ueth->rxbuf = memalign(rxsize, ARCH_DMA_MINALIGN); + if (!ueth->rxbuf) + return -ENOMEM; + + ret = usb_set_interface(udev, iface_desc->bInterfaceNumber, ifnum); + if (ret) { + debug("%s: %s: Cannot set interface: %d\n", __func__, dev->name, + ret); + return ret; + } + ueth->pusb_dev = udev; + + return 0; +} + +int usb_ether_deregister(struct ueth_data *ueth) +{ + return 0; +} + +int usb_ether_receive(struct ueth_data *ueth, int rxsize) +{ + int actual_len; + int ret; + + if (rxsize > ueth->rxsize) + return -EINVAL; + ret = usb_bulk_msg(ueth->pusb_dev, + usb_rcvbulkpipe(ueth->pusb_dev, ueth->ep_in), + ueth->rxbuf, rxsize, &actual_len, + USB_BULK_RECV_TIMEOUT); + debug("Rx: len = %u, actual = %u, err = %d\n", rxsize, actual_len, ret); + if (ret) { + printf("Rx: failed to receive: %d\n", ret); + return ret; + } + if (actual_len > rxsize) { + debug("Rx: received too many bytes %d\n", actual_len); + return -ENOSPC; + } + ueth->rxlen = actual_len; + ueth->rxptr = 0; + + return actual_len ? 0 : -EAGAIN; +} + +void usb_ether_advance_rxbuf(struct ueth_data *ueth, int num_bytes) +{ + ueth->rxptr += num_bytes; + if (num_bytes < 0 || ueth->rxptr >= ueth->rxlen) + ueth->rxlen = 0; +} + +int usb_ether_get_rx_bytes(struct ueth_data *ueth, uint8_t **ptrp) +{ + if (!ueth->rxlen) + return 0; + + *ptrp = &ueth->rxbuf[ueth->rxptr]; + + return ueth->rxlen - ueth->rxptr; +} + +#else + typedef void (*usb_eth_before_probe)(void); typedef int (*usb_eth_probe)(struct usb_device *dev, unsigned int ifnum, struct ueth_data *ss); @@ -140,8 +266,8 @@ int usb_host_eth_scan(int mode) usb_max_eth_dev = 0; #ifdef CONFIG_DM_USB /* - * TODO: We should add USB_DEVICE() declarations to each USB ethernet - * driver and then most of this file can be removed. + * TODO: We should add U_BOOT_USB_DEVICE() declarations to each USB + * Ethernet driver and then most of this file can be removed. */ struct udevice *bus; struct uclass *uc; @@ -197,3 +323,4 @@ int usb_host_eth_scan(int mode) return 0; return -1; } +#endif diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 70bb550..4c11a7e 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -11,15 +11,16 @@ obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o # new USB gadget layer dependencies ifdef CONFIG_USB_GADGET obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o +obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG_PHY) += s3c_udc_otg_phy.o obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o obj-$(CONFIG_CI_UDC) += ci_udc.o -obj-$(CONFIG_THOR_FUNCTION) += f_thor.o -obj-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o -obj-$(CONFIG_DFU_FUNCTION) += f_dfu.o -obj-$(CONFIG_USB_GADGET_MASS_STORAGE) += f_mass_storage.o -obj-$(CONFIG_CMD_FASTBOOT) += f_fastboot.o +obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o +obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o +obj-$(CONFIG_USB_FUNCTION_DFU) += f_dfu.o +obj-$(CONFIG_USB_FUNCTION_MASS_STORAGE) += f_mass_storage.o +obj-$(CONFIG_USB_FUNCTION_FASTBOOT) += f_fastboot.o endif ifdef CONFIG_USB_ETHER obj-y += ether.o diff --git a/drivers/usb/gadget/bcm_udc_otg.h b/drivers/usb/gadget/bcm_udc_otg.h new file mode 100644 index 0000000..d47aefa --- /dev/null +++ b/drivers/usb/gadget/bcm_udc_otg.h @@ -0,0 +1,22 @@ +/* + * Copyright 2015 Broadcom Corporation. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __BCM_UDC_OTG_H +#define __BCM_UDC_OTG_H + +#include <common.h> + +static inline void wfld_set(uintptr_t addr, uint32_t fld_val, uint32_t fld_mask) +{ + writel(((readl(addr) & ~(fld_mask)) | (fld_val)), (addr)); +} + +static inline void wfld_clear(uintptr_t addr, uint32_t fld_mask) +{ + writel((readl(addr) & ~(fld_mask)), (addr)); +} + +#endif diff --git a/drivers/usb/gadget/bcm_udc_otg_phy.c b/drivers/usb/gadget/bcm_udc_otg_phy.c new file mode 100644 index 0000000..f8690b0 --- /dev/null +++ b/drivers/usb/gadget/bcm_udc_otg_phy.c @@ -0,0 +1,51 @@ +/* + * Copyright 2015 Broadcom Corporation. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sysmap.h> + +#include <usb/s3c_udc.h> +#include "bcm_udc_otg.h" + +void otg_phy_init(struct s3c_udc *dev) +{ + /* set Phy to driving mode */ + wfld_clear(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET, + HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK); + + udelay(100); + + /* clear Soft Disconnect */ + wfld_clear(HSOTG_BASE_ADDR + HSOTG_DCTL_OFFSET, + HSOTG_DCTL_SFTDISCON_MASK); + + /* invoke Reset (active low) */ + wfld_clear(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET, + HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK); + + /* Reset needs to be asserted for 2ms */ + udelay(2000); + + /* release Reset */ + wfld_set(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET, + HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK, + HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK); +} + +void otg_phy_off(struct s3c_udc *dev) +{ + /* Soft Disconnect */ + wfld_set(HSOTG_BASE_ADDR + HSOTG_DCTL_OFFSET, + HSOTG_DCTL_SFTDISCON_MASK, + HSOTG_DCTL_SFTDISCON_MASK); + + /* set Phy to non-driving (reset) mode */ + wfld_set(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET, + HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK, + HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK); +} diff --git a/drivers/usb/gadget/ci_udc.c b/drivers/usb/gadget/ci_udc.c index aadff42..3e8eb87 100644 --- a/drivers/usb/gadget/ci_udc.c +++ b/drivers/usb/gadget/ci_udc.c @@ -221,8 +221,8 @@ static void ci_flush_qtd(int ep_num) */ static void ci_flush_td(struct ept_queue_item *td) { - const uint32_t start = (uint32_t)td; - const uint32_t end = (uint32_t) td + ILIST_ENT_SZ; + const unsigned long start = (unsigned long)td; + const unsigned long end = (unsigned long)td + ILIST_ENT_SZ; flush_dcache_range(start, end); } @@ -249,8 +249,8 @@ static void ci_invalidate_qtd(int ep_num) */ static void ci_invalidate_td(struct ept_queue_item *td) { - const uint32_t start = (uint32_t)td; - const uint32_t end = start + ILIST_ENT_SZ; + const unsigned long start = (unsigned long)td; + const unsigned long end = start + ILIST_ENT_SZ; invalidate_dcache_range(start, end); } @@ -258,10 +258,12 @@ static struct usb_request * ci_ep_alloc_request(struct usb_ep *ep, unsigned int gfp_flags) { struct ci_ep *ci_ep = container_of(ep, struct ci_ep, ep); - int num; + int num = -1; struct ci_req *ci_req; - num = ci_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; + if (ci_ep->desc) + num = ci_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; + if (num == 0 && controller.ep0_req) return &controller.ep0_req->req; @@ -281,9 +283,11 @@ static void ci_ep_free_request(struct usb_ep *ep, struct usb_request *req) { struct ci_ep *ci_ep = container_of(ep, struct ci_ep, ep); struct ci_req *ci_req = container_of(req, struct ci_req, req); - int num; + int num = -1; + + if (ci_ep->desc) + num = ci_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - num = ci_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; if (num == 0) { if (!controller.ep0_req) return; @@ -459,7 +463,7 @@ static void ci_ep_submit_next_request(struct ci_ep *ci_ep) if (len) { qtd = (struct ept_queue_item *) memalign(ILIST_ALIGN, ILIST_ENT_SZ); - dtd->next = (uint32_t)qtd; + dtd->next = (unsigned long)qtd; dtd = qtd; memset(dtd, 0, ILIST_ENT_SZ); } @@ -503,10 +507,10 @@ static void ci_ep_submit_next_request(struct ci_ep *ci_ep) ci_flush_qtd(num); - item = (struct ept_queue_item *)head->next; + item = (struct ept_queue_item *)(unsigned long)head->next; while (item->next != TERMINATE) { - ci_flush_td((struct ept_queue_item *)item->next); - item = (struct ept_queue_item *)item->next; + ci_flush_td((struct ept_queue_item *)(unsigned long)item->next); + item = (struct ept_queue_item *)(unsigned long)item->next; } DBG("ept%d %s queue len %x, req %p, buffer %p\n", @@ -594,7 +598,8 @@ static void handle_ep_complete(struct ci_ep *ci_ep) printf("EP%d/%s FAIL info=%x pg0=%x\n", num, in ? "in" : "out", item->info, item->page0); if (j != ci_req->dtd_count - 1) - next_td = (struct ept_queue_item *)item->next; + next_td = (struct ept_queue_item *)(unsigned long) + item->next; if (j != 0) free(item); } diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 206b6d1..ca01a01 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -311,6 +311,9 @@ static int fastboot_tx_write(const char *buffer, unsigned int buffer_size) memcpy(in_req->buf, buffer, buffer_size); in_req->length = buffer_size; + + usb_ep_dequeue(fastboot_func->in_ep, in_req); + ret = usb_ep_queue(fastboot_func->in_ep, in_req, 0); if (ret) printf("Error %d on queue\n", ret); @@ -377,7 +380,7 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req) !strcmp_l1("max-download-size", cmd)) { char str_num[12]; - sprintf(str_num, "0x%08x", CONFIG_USB_FASTBOOT_BUF_SIZE); + sprintf(str_num, "0x%08x", CONFIG_FASTBOOT_BUF_SIZE); strncat(response, str_num, chars_left); } else if (!strcmp_l1("serialno", cmd)) { s = getenv("serial#"); @@ -427,7 +430,7 @@ static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req) if (buffer_size < transfer_size) transfer_size = buffer_size; - memcpy((void *)CONFIG_USB_FASTBOOT_BUF_ADDR + download_bytes, + memcpy((void *)CONFIG_FASTBOOT_BUF_ADDR + download_bytes, buffer, transfer_size); pre_dot_num = download_bytes / BYTES_PER_DOT; @@ -480,7 +483,7 @@ static void cb_download(struct usb_ep *ep, struct usb_request *req) if (0 == download_size) { sprintf(response, "FAILdata invalid size"); - } else if (download_size > CONFIG_USB_FASTBOOT_BUF_SIZE) { + } else if (download_size > CONFIG_FASTBOOT_BUF_SIZE) { download_size = 0; sprintf(response, "FAILdata too large"); } else { @@ -541,7 +544,7 @@ static void cb_flash(struct usb_ep *ep, struct usb_request *req) strcpy(response, "FAILno flash device defined"); #ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV - fb_mmc_flash_write(cmd, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR, + fb_mmc_flash_write(cmd, (void *)CONFIG_FASTBOOT_BUF_ADDR, download_bytes, response); #endif fastboot_tx_write_str(response); @@ -635,6 +638,9 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req) void (*func_cb)(struct usb_ep *ep, struct usb_request *req) = NULL; int i; + if (req->status != 0 || req->length == 0) + return; + for (i = 0; i < ARRAY_SIZE(cmd_dispatch_info); i++) { if (!strcmp_l1(cmd_dispatch_info[i].cmd, cmdbuf)) { func_cb = cmd_dispatch_info[i].cb; @@ -656,9 +662,7 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req) } } - if (req->status == 0) { - *cmdbuf = '\0'; - req->actual = 0; - usb_ep_queue(ep, req, 0); - } + *cmdbuf = '\0'; + req->actual = 0; + usb_ep_queue(ep, req, 0); } diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c index ee52a29..ad89a0d 100644 --- a/drivers/usb/gadget/g_dnl.c +++ b/drivers/usb/gadget/g_dnl.c @@ -12,6 +12,7 @@ #include <mmc.h> #include <part.h> +#include <usb.h> #include <g_dnl.h> #include <usb_mass_storage.h> @@ -148,6 +149,18 @@ static int g_dnl_config_register(struct usb_composite_dev *cdev) } __weak +int board_usb_init(int index, enum usb_init_type init) +{ + return 0; +} + +__weak +int board_usb_cleanup(int index, enum usb_init_type init) +{ + return 0; +} + +__weak int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) { return 0; diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 4d35d3e..6cc3bbd 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -51,8 +51,10 @@ obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o # xhci obj-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o +obj-$(CONFIG_USB_XHCI_DWC3) += xhci-dwc3.o obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o +obj-$(CONFIG_USB_XHCI_FSL) += xhci-fsl.o obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o obj-$(CONFIG_USB_XHCI_UNIPHIER) += xhci-uniphier.o diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index bf02221..3a0d32e 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -5,20 +5,7 @@ * * All rights reserved. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 */ #include <common.h> #include <dm.h> @@ -321,7 +308,7 @@ static void ehci_update_endpt2_dev_n_port(struct usb_device *udev, struct udevice *dev = parent; if (device_get_uclass_id(dev->parent) != UCLASS_USB_HUB) { - printf("ehci: Error cannot find high speed parent of usb-1 device\n"); + printf("ehci: Error cannot find high-speed parent of usb-1 device\n"); return; } diff --git a/drivers/usb/host/ehci-marvell.c b/drivers/usb/host/ehci-marvell.c index 03c489c..3a9f60f 100644 --- a/drivers/usb/host/ehci-marvell.c +++ b/drivers/usb/host/ehci-marvell.c @@ -21,9 +21,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define rdl(off) readl(MVUSB0_BASE + (off)) -#define wrl(off, val) writel((val), MVUSB0_BASE + (off)) - #define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4)) #define USB_WINDOW_BASE(i) (0x324 + ((i) << 4)) #define USB_TARGET_DRAM 0x0 @@ -48,20 +45,20 @@ static void usb_brg_adrdec_setup(void) dram = mvebu_mbus_dram_info(); for (i = 0; i < 4; i++) { - wrl(USB_WINDOW_CTRL(i), 0); - wrl(USB_WINDOW_BASE(i), 0); + writel(0, MVUSB0_BASE + USB_WINDOW_CTRL(i)); + writel(0, MVUSB0_BASE + USB_WINDOW_BASE(i)); } for (i = 0; i < dram->num_cs; i++) { const struct mbus_dram_window *cs = dram->cs + i; /* Write size, attributes and target id to control register */ - wrl(USB_WINDOW_CTRL(i), - ((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | - (dram->mbus_dram_target_id << 4) | 1); + writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + MVUSB0_BASE + USB_WINDOW_CTRL(i)); /* Write base address to base register */ - wrl(USB_WINDOW_BASE(i), cs->base); + writel(cs->base, MVUSB0_BASE + USB_WINDOW_BASE(i)); } } #else @@ -95,13 +92,14 @@ static void usb_brg_adrdec_setup(void) size = gd->bd->bi_dram[i].size; base = gd->bd->bi_dram[i].start; if ((size) && (attrib)) - wrl(USB_WINDOW_CTRL(i), - MVCPU_WIN_CTRL_DATA(size, USB_TARGET_DRAM, - attrib, MVCPU_WIN_ENABLE)); + writel(MVCPU_WIN_CTRL_DATA(size, USB_TARGET_DRAM, + attrib, MVCPU_WIN_ENABLE), + MVUSB0_BASE + USB_WINDOW_CTRL(i)); else - wrl(USB_WINDOW_CTRL(i), MVCPU_WIN_DISABLE); + writel(MVCPU_WIN_DISABLE, + MVUSB0_BASE + USB_WINDOW_CTRL(i)); - wrl(USB_WINDOW_BASE(i), base); + writel(base, MVUSB0_BASE + USB_WINDOW_BASE(i)); } } #endif diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index b9eabc5..0cb9fcc 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -2,29 +2,49 @@ * Copyright (c) 2007-2008, Juniper Networks, Inc. * All rights reserved. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 */ #include <common.h> +#include <dm.h> #include <errno.h> #include <pci.h> #include <usb.h> #include "ehci.h" +/* Information about a USB port */ +struct ehci_pci_priv { + struct ehci_ctrl ehci; +}; + +static void ehci_pci_common_init(pci_dev_t pdev, struct ehci_hccr **ret_hccr, + struct ehci_hcor **ret_hcor) +{ + struct ehci_hccr *hccr; + struct ehci_hcor *hcor; + uint32_t cmd; + + hccr = (struct ehci_hccr *)pci_map_bar(pdev, + PCI_BASE_ADDRESS_0, PCI_REGION_MEM); + hcor = (struct ehci_hcor *)((uint32_t) hccr + + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + + debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n", + (uint32_t)hccr, (uint32_t)hcor, + (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + + *ret_hccr = hccr; + *ret_hcor = hcor; + + /* enable busmaster */ + pci_read_config_dword(pdev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER; + pci_write_config_dword(pdev, PCI_COMMAND, cmd); +} + +#ifndef CONFIG_DM_USB + #ifdef CONFIG_PCI_EHCI_DEVICE static struct pci_device_id ehci_pci_ids[] = { /* Please add supported PCI EHCI controller ids here */ @@ -33,7 +53,6 @@ static struct pci_device_id ehci_pci_ids[] = { {0x12D8, 0x400F}, /* Pericom */ {0, 0} }; -#else #endif /* @@ -44,9 +63,6 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **ret_hccr, struct ehci_hcor **ret_hcor) { pci_dev_t pdev; - uint32_t cmd; - struct ehci_hccr *hccr; - struct ehci_hcor *hcor; #ifdef CONFIG_PCI_EHCI_DEVICE pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE); @@ -57,23 +73,8 @@ int ehci_hcd_init(int index, enum usb_init_type init, printf("EHCI host controller not found\n"); return -1; } + ehci_pci_common_init(pdev, ret_hccr, ret_hcor); - hccr = (struct ehci_hccr *)pci_map_bar(pdev, - PCI_BASE_ADDRESS_0, PCI_REGION_MEM); - hcor = (struct ehci_hcor *)((uint32_t) hccr + - HC_LENGTH(ehci_readl(&hccr->cr_capbase))); - - debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n", - (uint32_t)hccr, (uint32_t)hcor, - (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); - - *ret_hccr = hccr; - *ret_hcor = hcor; - - /* enable busmaster */ - pci_read_config_dword(pdev, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MASTER; - pci_write_config_dword(pdev, PCI_COMMAND, cmd); return 0; } @@ -85,3 +86,46 @@ int ehci_hcd_stop(int index) { return 0; } +#endif /* nCONFIG_DM_USB */ + +#ifdef CONFIG_DM_USB +static int ehci_pci_probe(struct udevice *dev) +{ + struct ehci_hccr *hccr; + struct ehci_hcor *hcor; + + ehci_pci_common_init(pci_get_bdf(dev), &hccr, &hcor); + + return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST); +} + +static int ehci_pci_remove(struct udevice *dev) +{ + int ret; + + ret = ehci_deregister(dev); + if (ret) + return ret; + + return 0; +} + +U_BOOT_DRIVER(ehci_pci) = { + .name = "ehci_pci", + .id = UCLASS_USB, + .probe = ehci_pci_probe, + .remove = ehci_pci_remove, + .ops = &ehci_usb_ops, + .platdata_auto_alloc_size = sizeof(struct usb_platdata), + .priv_auto_alloc_size = sizeof(struct ehci_pci_priv), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; + +static struct pci_device_id ehci_pci_supported[] = { + { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0) }, + {}, +}; + +U_BOOT_PCI_DEVICE(ehci_pci, ehci_pci_supported); + +#endif /* CONFIG_DM_USB */ diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index e2574d7..0edd557 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -1,6 +1,6 @@ /* * Copyright (c) 2011 The Chromium OS Authors. - * Copyright (c) 2009-2013 NVIDIA Corporation + * Copyright (c) 2009-2015 NVIDIA Corporation * Copyright (c) 2013 Lucas Stach * * SPDX-License-Identifier: GPL-2.0+ @@ -64,6 +64,7 @@ enum usb_ctlr_type { USB_CTLR_T20, USB_CTLR_T30, USB_CTLR_T114, + USB_CTLR_T210, USB_CTRL_COUNT, }; @@ -149,6 +150,15 @@ static const unsigned T114_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = { { 0x3C0, 0x1A, 0x00, 0xC, 2, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 0xB } }; +/* NOTE: 13/26MHz settings are N/A for T210, so dupe 12MHz settings for now */ +static const unsigned T210_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = { + /* DivN, DivM, DivP, KCP, KVCO, Delays Debounce, Bias */ + { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 30000, 5 }, + { 0x019, 0x01, 0x01, 0x0, 0, 0x03, 0x4B, 0x0C, 0xBB, 48000, 8 }, + { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 30000, 5 }, + { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 30000, 5 }, +}; + /* UTMIP Idle Wait Delay */ static const u8 utmip_idle_wait_delay = 17; @@ -177,6 +187,10 @@ static struct fdt_usb_controller fdt_usb_controllers[USB_CTRL_COUNT] = { .has_hostpc = 1, .pll_parameter = (const unsigned *)T114_usb_pll, }, + { + .has_hostpc = 1, + .pll_parameter = (const unsigned *)T210_usb_pll, + }, }; /* @@ -458,6 +472,16 @@ static int init_utmi_usb_controller(struct fdt_usb *config, UTMIP_DEBOUNCE_CFG0_MASK, timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT); + if (timing[PARAM_DEBOUNCE_A_TIME] > 0xFFFF) { + clrsetbits_le32(&usbctlr->utmip_debounce_cfg0, + UTMIP_DEBOUNCE_CFG0_MASK, + (timing[PARAM_DEBOUNCE_A_TIME] >> 1) + << UTMIP_DEBOUNCE_CFG0_SHIFT); + clrsetbits_le32(&usbctlr->utmip_bias_cfg1, + UTMIP_BIAS_DEBOUNCE_TIMESCALE_MASK, + 1 << UTMIP_BIAS_DEBOUNCE_TIMESCALE_SHIFT); + } + setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J); /* Disable battery charge enabling bit */ @@ -643,6 +667,10 @@ static int init_ulpi_usb_controller(struct fdt_usb *config, static void config_clock(const u32 timing[]) { + debug("%s: DIVM = %d, DIVN = %d, DIVP = %d, cpcon/lfcon = %d/%d\n", + __func__, timing[PARAM_DIVM], timing[PARAM_DIVN], + timing[PARAM_DIVP], timing[PARAM_CPCON], timing[PARAM_LFCON]); + clock_start_pll(CLOCK_ID_USB, timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP], timing[PARAM_CPCON], timing[PARAM_LFCON]); @@ -823,6 +851,7 @@ static const struct udevice_id ehci_usb_ids[] = { { .compatible = "nvidia,tegra20-ehci", .data = USB_CTLR_T20 }, { .compatible = "nvidia,tegra30-ehci", .data = USB_CTLR_T30 }, { .compatible = "nvidia,tegra114-ehci", .data = USB_CTLR_T114 }, + { .compatible = "nvidia,tegra210-ehci", .data = USB_CTLR_T210 }, { } }; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 774282d..3379c29 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -3,20 +3,7 @@ * Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it> * All rights reserved. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 */ #ifndef USB_EHCI_H diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 6f33456..373e04c 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -3,19 +3,7 @@ * * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * + * SPDX-License-Identifier: GPL-2.0 */ #include <common.h> diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h index ca1b671..67dc3c4 100644 --- a/drivers/usb/host/r8a66597.h +++ b/drivers/usb/host/r8a66597.h @@ -3,19 +3,7 @@ * * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __R8A66597_H__ diff --git a/drivers/usb/host/usb-uclass.c b/drivers/usb/host/usb-uclass.c index 6e86f4a..c5d1e7f 100644 --- a/drivers/usb/host/usb-uclass.c +++ b/drivers/usb/host/usb-uclass.c @@ -128,6 +128,17 @@ int usb_alloc_device(struct usb_device *udev) return ops->alloc_device(bus, udev); } +int usb_reset_root_port(struct usb_device *udev) +{ + struct udevice *bus = udev->controller_dev; + struct dm_usb_ops *ops = usb_get_ops(bus); + + if (!ops->reset_root_port) + return -ENOSYS; + + return ops->reset_root_port(bus, udev); +} + int usb_stop(void) { struct udevice *bus; @@ -146,6 +157,9 @@ int usb_stop(void) ret = device_remove(bus); if (ret && !err) err = ret; + ret = device_unbind_children(bus); + if (ret && !err) + err = ret; } #ifdef CONFIG_SANDBOX @@ -265,11 +279,6 @@ int usb_init(void) return usb_started ? 0 : -1; } -int usb_reset_root_port(void) -{ - return -ENOSYS; -} - static struct usb_device *find_child_devnum(struct udevice *parent, int devnum) { struct usb_device *udev; @@ -294,14 +303,14 @@ static struct usb_device *find_child_devnum(struct udevice *parent, int devnum) struct usb_device *usb_get_dev_index(struct udevice *bus, int index) { - struct udevice *hub; + struct udevice *dev; int devnum = index + 1; /* Addresses are allocated from 1 on USB */ - device_find_first_child(bus, &hub); - if (device_get_uclass_id(hub) == UCLASS_USB_HUB) - return find_child_devnum(hub, devnum); + device_find_first_child(bus, &dev); + if (!dev) + return NULL; - return NULL; + return find_child_devnum(dev, devnum); } int usb_post_bind(struct udevice *dev) @@ -310,35 +319,6 @@ int usb_post_bind(struct udevice *dev) return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false); } -int usb_port_reset(struct usb_device *parent, int portnr) -{ - unsigned short portstatus; - int ret; - - debug("%s: start\n", __func__); - - if (parent) { - /* reset the port for the second time */ - assert(portnr > 0); - debug("%s: reset %d\n", __func__, portnr - 1); - ret = legacy_hub_port_reset(parent, portnr - 1, &portstatus); - if (ret < 0) { - printf("\n Couldn't reset port %i\n", portnr); - return ret; - } - } else { - debug("%s: reset root\n", __func__); - usb_reset_root_port(); - } - - return 0; -} - -int usb_legacy_port_reset(struct usb_device *parent, int portnr) -{ - return usb_port_reset(parent, portnr); -} - int usb_setup_ehci_gadget(struct ehci_ctrl **ctlrp) { struct usb_platdata *plat; @@ -511,15 +491,14 @@ error: } /** - * usb_find_child() - Find an existing device which matches our needs - * - * + * usb_find_emul_child() - Find an existing device for emulated devices */ -static int usb_find_child(struct udevice *parent, - struct usb_device_descriptor *desc, - struct usb_interface_descriptor *iface, - struct udevice **devp) +static int usb_find_emul_child(struct udevice *parent, + struct usb_device_descriptor *desc, + struct usb_interface_descriptor *iface, + struct udevice **devp) { +#ifdef CONFIG_SANDBOX struct udevice *dev; *devp = NULL; @@ -538,7 +517,7 @@ static int usb_find_child(struct udevice *parent, return 0; } } - +#endif return -ENOENT; } @@ -594,12 +573,12 @@ int usb_scan_device(struct udevice *parent, int port, debug("Calling usb_setup_device(), portnr=%d\n", udev->portnr); parent_udev = device_get_uclass_id(parent) == UCLASS_USB_HUB ? dev_get_parentdata(parent) : NULL; - ret = usb_setup_device(udev, priv->desc_before_addr, parent_udev, port); + ret = usb_setup_device(udev, priv->desc_before_addr, parent_udev); debug("read_descriptor for '%s': ret=%d\n", parent->name, ret); if (ret) return ret; - ret = usb_find_child(parent, &udev->descriptor, iface, &dev); - debug("** usb_find_child returns %d\n", ret); + ret = usb_find_emul_child(parent, &udev->descriptor, iface, &dev); + debug("** usb_find_emul_child returns %d\n", ret); if (ret) { if (ret != -ENOENT) return ret; diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c new file mode 100644 index 0000000..c722c50 --- /dev/null +++ b/drivers/usb/host/xhci-dwc3.c @@ -0,0 +1,97 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * DWC3 controller driver + * + * Author: Ramneek Mehresh<ramneek.mehresh@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <linux/usb/dwc3.h> + +void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode) +{ + clrsetbits_le32(&dwc3_reg->g_ctl, + DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG), + DWC3_GCTL_PRTCAPDIR(mode)); +} + +void dwc3_phy_reset(struct dwc3 *dwc3_reg) +{ + /* Assert USB3 PHY reset */ + setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); + + /* Assert USB2 PHY reset */ + setbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); + + mdelay(100); + + /* Clear USB3 PHY reset */ + clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); + + /* Clear USB2 PHY reset */ + clrbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); +} + +void dwc3_core_soft_reset(struct dwc3 *dwc3_reg) +{ + /* Before Resetting PHY, put Core in Reset */ + setbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); + + /* reset USB3 phy - if required */ + dwc3_phy_reset(dwc3_reg); + + /* After PHYs are stable we can take Core out of reset state */ + clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); +} + +int dwc3_core_init(struct dwc3 *dwc3_reg) +{ + u32 reg; + u32 revision; + unsigned int dwc3_hwparams1; + + revision = readl(&dwc3_reg->g_snpsid); + /* This should read as U3 followed by revision number */ + if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) { + puts("this is not a DesignWare USB3 DRD Core\n"); + return -1; + } + + dwc3_core_soft_reset(dwc3_reg); + + dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1); + + reg = readl(&dwc3_reg->g_ctl); + reg &= ~DWC3_GCTL_SCALEDOWN_MASK; + reg &= ~DWC3_GCTL_DISSCRAMBLE; + switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) { + case DWC3_GHWPARAMS1_EN_PWROPT_CLK: + reg &= ~DWC3_GCTL_DSBLCLKGTNG; + break; + default: + debug("No power optimization available\n"); + } + + /* + * WORKAROUND: DWC3 revisions <1.90a have a bug + * where the device can fail to connect at SuperSpeed + * and falls back to high-speed mode which causes + * the device to enter a Connect/Disconnect loop + */ + if ((revision & DWC3_REVISION_MASK) < 0x190a) + reg |= DWC3_GCTL_U2RSTECN; + + writel(reg, &dwc3_reg->g_ctl); + + return 0; +} + +void dwc3_set_fladj(struct dwc3 *dwc3_reg, u32 val) +{ + setbits_le32(&dwc3_reg->g_fladj, GFLADJ_30MHZ_REG_SEL | + GFLADJ_30MHZ(val)); +} diff --git a/drivers/usb/host/xhci-exynos5.c b/drivers/usb/host/xhci-exynos5.c index a27a796..251885b 100644 --- a/drivers/usb/host/xhci-exynos5.c +++ b/drivers/usb/host/xhci-exynos5.c @@ -179,84 +179,6 @@ static void exynos5_usb3_phy_exit(struct exynos_usb3_phy *phy) set_usbdrd_phy_ctrl(POWER_USB_DRD_PHY_CTRL_DISABLE); } -static void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode) -{ - clrsetbits_le32(&dwc3_reg->g_ctl, - DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG), - DWC3_GCTL_PRTCAPDIR(mode)); -} - -static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg) -{ - /* Before Resetting PHY, put Core in Reset */ - setbits_le32(&dwc3_reg->g_ctl, - DWC3_GCTL_CORESOFTRESET); - - /* Assert USB3 PHY reset */ - setbits_le32(&dwc3_reg->g_usb3pipectl[0], - DWC3_GUSB3PIPECTL_PHYSOFTRST); - - /* Assert USB2 PHY reset */ - setbits_le32(&dwc3_reg->g_usb2phycfg, - DWC3_GUSB2PHYCFG_PHYSOFTRST); - - mdelay(100); - - /* Clear USB3 PHY reset */ - clrbits_le32(&dwc3_reg->g_usb3pipectl[0], - DWC3_GUSB3PIPECTL_PHYSOFTRST); - - /* Clear USB2 PHY reset */ - clrbits_le32(&dwc3_reg->g_usb2phycfg, - DWC3_GUSB2PHYCFG_PHYSOFTRST); - - /* After PHYs are stable we can take Core out of reset state */ - clrbits_le32(&dwc3_reg->g_ctl, - DWC3_GCTL_CORESOFTRESET); -} - -static int dwc3_core_init(struct dwc3 *dwc3_reg) -{ - u32 reg; - u32 revision; - unsigned int dwc3_hwparams1; - - revision = readl(&dwc3_reg->g_snpsid); - /* This should read as U3 followed by revision number */ - if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) { - puts("this is not a DesignWare USB3 DRD Core\n"); - return -EINVAL; - } - - dwc3_core_soft_reset(dwc3_reg); - - dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1); - - reg = readl(&dwc3_reg->g_ctl); - reg &= ~DWC3_GCTL_SCALEDOWN_MASK; - reg &= ~DWC3_GCTL_DISSCRAMBLE; - switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) { - case DWC3_GHWPARAMS1_EN_PWROPT_CLK: - reg &= ~DWC3_GCTL_DSBLCLKGTNG; - break; - default: - debug("No power optimization available\n"); - } - - /* - * WORKAROUND: DWC3 revisions <1.90a have a bug - * where the device can fail to connect at SuperSpeed - * and falls back to high-speed mode which causes - * the device to enter a Connect/Disconnect loop - */ - if ((revision & DWC3_REVISION_MASK) < 0x190a) - reg |= DWC3_GCTL_U2RSTECN; - - writel(reg, &dwc3_reg->g_ctl); - - return 0; -} - static int exynos_xhci_core_init(struct exynos_xhci *exynos) { int ret; diff --git a/drivers/usb/host/xhci-fsl.c b/drivers/usb/host/xhci-fsl.c new file mode 100644 index 0000000..6481e07 --- /dev/null +++ b/drivers/usb/host/xhci-fsl.c @@ -0,0 +1,111 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * FSL USB HOST xHCI Controller + * + * Author: Ramneek Mehresh<ramneek.mehresh@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <usb.h> +#include <asm-generic/errno.h> +#include <linux/compat.h> +#include <linux/usb/xhci-fsl.h> +#include <linux/usb/dwc3.h> +#include "xhci.h" + +/* Declare global data pointer */ +DECLARE_GLOBAL_DATA_PTR; + +static struct fsl_xhci fsl_xhci; +unsigned long ctr_addr[] = FSL_USB_XHCI_ADDR; + +__weak int __board_usb_init(int index, enum usb_init_type init) +{ + return 0; +} + +void usb_phy_reset(struct dwc3 *dwc3_reg) +{ + /* Assert USB3 PHY reset */ + setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); + + /* Assert USB2 PHY reset */ + setbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); + + mdelay(200); + + /* Clear USB3 PHY reset */ + clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); + + /* Clear USB2 PHY reset */ + clrbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); +} + +static int fsl_xhci_core_init(struct fsl_xhci *fsl_xhci) +{ + int ret = 0; + + ret = dwc3_core_init(fsl_xhci->dwc3_reg); + if (ret) { + debug("%s:failed to initialize core\n", __func__); + return ret; + } + + /* We are hard-coding DWC3 core to Host Mode */ + dwc3_set_mode(fsl_xhci->dwc3_reg, DWC3_GCTL_PRTCAP_HOST); + + /* Set GFLADJ_30MHZ as 20h as per XHCI spec default value */ + dwc3_set_fladj(fsl_xhci->dwc3_reg, GFLADJ_30MHZ_DEFAULT); + + return ret; +} + +static int fsl_xhci_core_exit(struct fsl_xhci *fsl_xhci) +{ + /* + * Currently fsl socs do not support PHY shutdown from + * sw. But this support may be added in future socs. + */ + return 0; +} + +int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor) +{ + struct fsl_xhci *ctx = &fsl_xhci; + int ret = 0; + + ctx->hcd = (struct xhci_hccr *)ctr_addr[index]; + ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET); + + ret = board_usb_init(index, USB_INIT_HOST); + if (ret != 0) { + puts("Failed to initialize board for USB\n"); + return ret; + } + + ret = fsl_xhci_core_init(ctx); + if (ret < 0) { + puts("Failed to initialize xhci\n"); + return ret; + } + + *hccr = (struct xhci_hccr *)ctx->hcd; + *hcor = (struct xhci_hcor *)((uintptr_t) *hccr + + HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase))); + + debug("fsl-xhci: init hccr %lx and hcor %lx hc_length %lx\n", + (uintptr_t)*hccr, (uintptr_t)*hcor, + (uintptr_t)HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase))); + + return ret; +} + +void xhci_hcd_stop(int index) +{ + struct fsl_xhci *ctx = &fsl_xhci; + + fsl_xhci_core_exit(ctx); +} diff --git a/drivers/usb/host/xhci-keystone.c b/drivers/usb/host/xhci-keystone.c index 05d338f..924fb76 100644 --- a/drivers/usb/host/xhci-keystone.c +++ b/drivers/usb/host/xhci-keystone.c @@ -68,94 +68,6 @@ static void keystone_xhci_phy_unset(struct keystone_xhci_phy *phy) writel(val, &phy->phy_clock); } -static void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode) -{ - clrsetbits_le32(&dwc3_reg->g_ctl, - DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG), - DWC3_GCTL_PRTCAPDIR(mode)); -} - -static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg) -{ - /* Before Resetting PHY, put Core in Reset */ - setbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); - - /* Assert USB3 PHY reset */ - setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); - - /* Assert USB2 PHY reset */ - setbits_le32(&dwc3_reg->g_usb2phycfg[0], DWC3_GUSB2PHYCFG_PHYSOFTRST); - - mdelay(100); - - /* Clear USB3 PHY reset */ - clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); - - /* Clear USB2 PHY reset */ - clrbits_le32(&dwc3_reg->g_usb2phycfg[0], DWC3_GUSB2PHYCFG_PHYSOFTRST); - - /* After PHYs are stable we can take Core out of reset state */ - clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); -} - -static int dwc3_core_init(struct dwc3 *dwc3_reg) -{ - u32 revision, val; - unsigned long t_rst; - unsigned int dwc3_hwparams1; - - revision = readl(&dwc3_reg->g_snpsid); - /* This should read as U3 followed by revision number */ - if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) { - puts("this is not a DesignWare USB3 DRD Core\n"); - return -EINVAL; - } - - /* issue device SoftReset too */ - writel(DWC3_DCTL_CSFTRST, &dwc3_reg->d_ctl); - - t_rst = get_timer(0); - do { - val = readl(&dwc3_reg->d_ctl); - if (!(val & DWC3_DCTL_CSFTRST)) - break; - WATCHDOG_RESET(); - } while (get_timer(t_rst) < 500); - - if (val & DWC3_DCTL_CSFTRST) { - debug("Reset timed out\n"); - return -2; - } - - dwc3_core_soft_reset(dwc3_reg); - - dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1); - - val = readl(&dwc3_reg->g_ctl); - val &= ~DWC3_GCTL_SCALEDOWN_MASK; - val &= ~DWC3_GCTL_DISSCRAMBLE; - switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) { - case DWC3_GHWPARAMS1_EN_PWROPT_CLK: - val &= ~DWC3_GCTL_DSBLCLKGTNG; - break; - default: - printf("No power optimization available\n"); - } - - /* - * WORKAROUND: DWC3 revisions <1.90a have a bug - * where the device can fail to connect at SuperSpeed - * and falls back to high-speed mode which causes - * the device to enter a Connect/Disconnect loop - */ - if ((revision & DWC3_REVISION_MASK) < 0x190a) - val |= DWC3_GCTL_U2RSTECN; - - writel(val, &dwc3_reg->g_ctl); - - return 0; -} - static int keystone_xhci_core_init(struct dwc3 *dwc3_reg) { int ret; diff --git a/drivers/usb/host/xhci-omap.c b/drivers/usb/host/xhci-omap.c index 912b2bd..3a55208 100644 --- a/drivers/usb/host/xhci-omap.c +++ b/drivers/usb/host/xhci-omap.c @@ -34,66 +34,6 @@ inline int __board_usb_init(int index, enum usb_init_type init) int board_usb_init(int index, enum usb_init_type init) __attribute__((weak, alias("__board_usb_init"))); -static void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode) -{ - clrsetbits_le32(&dwc3_reg->g_ctl, - DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG), - DWC3_GCTL_PRTCAPDIR(mode)); -} - -static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg) -{ - /* Before Resetting PHY, put Core in Reset */ - setbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); - - omap_reset_usb_phy(dwc3_reg); - - /* After PHYs are stable we can take Core out of reset state */ - clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); -} - -static int dwc3_core_init(struct dwc3 *dwc3_reg) -{ - u32 reg; - u32 revision; - unsigned int dwc3_hwparams1; - - revision = readl(&dwc3_reg->g_snpsid); - /* This should read as U3 followed by revision number */ - if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) { - puts("this is not a DesignWare USB3 DRD Core\n"); - return -1; - } - - dwc3_core_soft_reset(dwc3_reg); - - dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1); - - reg = readl(&dwc3_reg->g_ctl); - reg &= ~DWC3_GCTL_SCALEDOWN_MASK; - reg &= ~DWC3_GCTL_DISSCRAMBLE; - switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) { - case DWC3_GHWPARAMS1_EN_PWROPT_CLK: - reg &= ~DWC3_GCTL_DSBLCLKGTNG; - break; - default: - debug("No power optimization available\n"); - } - - /* - * WORKAROUND: DWC3 revisions <1.90a have a bug - * where the device can fail to connect at SuperSpeed - * and falls back to high-speed mode which causes - * the device to enter a Connect/Disconnect loop - */ - if ((revision & DWC3_REVISION_MASK) < 0x190a) - reg |= DWC3_GCTL_U2RSTECN; - - writel(reg, &dwc3_reg->g_ctl); - - return 0; -} - static int omap_xhci_core_init(struct omap_xhci *omap) { int ret = 0; diff --git a/drivers/usb/musb-new/am35x.c b/drivers/usb/musb-new/am35x.c index 857d7eb..d158454 100644 --- a/drivers/usb/musb-new/am35x.c +++ b/drivers/usb/musb-new/am35x.c @@ -100,7 +100,11 @@ struct am35x_glue { /* * am35x_musb_enable - enable interrupts */ +#ifndef __UBOOT__ static void am35x_musb_enable(struct musb *musb) +#else +static int am35x_musb_enable(struct musb *musb) +#endif { void __iomem *reg_base = musb->ctrl_base; u32 epmask; @@ -116,6 +120,9 @@ static void am35x_musb_enable(struct musb *musb) if (is_otg_enabled(musb)) musb_writel(reg_base, CORE_INTR_SRC_SET_REG, AM35X_INTR_DRVVBUS << AM35X_INTR_USB_SHIFT); +#ifdef __UBOOT__ + return 0; +#endif } /* diff --git a/drivers/usb/musb-new/musb_core.c b/drivers/usb/musb-new/musb_core.c index 242cc30..f530af4 100644 --- a/drivers/usb/musb-new/musb_core.c +++ b/drivers/usb/musb-new/musb_core.c @@ -926,10 +926,17 @@ b_host: /* * Program the HDRC to start (enable interrupts, dma, etc.). */ +#ifndef __UBOOT__ void musb_start(struct musb *musb) +#else +int musb_start(struct musb *musb) +#endif { void __iomem *regs = musb->mregs; u8 devctl = musb_readb(regs, MUSB_DEVCTL); +#ifdef __UBOOT__ + int ret; +#endif dev_dbg(musb->controller, "<== devctl %02x\n", devctl); @@ -972,8 +979,21 @@ void musb_start(struct musb *musb) if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) musb->is_active = 1; } + +#ifndef __UBOOT__ musb_platform_enable(musb); +#else + ret = musb_platform_enable(musb); + if (ret) { + musb->is_active = 0; + return ret; + } +#endif musb_writeb(regs, MUSB_DEVCTL, devctl); + +#ifdef __UBOOT__ + return 0; +#endif } diff --git a/drivers/usb/musb-new/musb_core.h b/drivers/usb/musb-new/musb_core.h index 2695742..8727f64 100644 --- a/drivers/usb/musb-new/musb_core.h +++ b/drivers/usb/musb-new/musb_core.h @@ -231,7 +231,11 @@ struct musb_platform_ops { int (*init)(struct musb *musb); int (*exit)(struct musb *musb); +#ifndef __UBOOT__ void (*enable)(struct musb *musb); +#else + int (*enable)(struct musb *musb); +#endif void (*disable)(struct musb *musb); int (*set_mode)(struct musb *musb, u8 mode); @@ -546,7 +550,11 @@ static inline void musb_configure_ep0(struct musb *musb) extern const char musb_driver_name[]; +#ifndef __UBOOT__ extern void musb_start(struct musb *musb); +#else +extern int musb_start(struct musb *musb); +#endif extern void musb_stop(struct musb *musb); extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); @@ -564,11 +572,21 @@ static inline void musb_platform_set_vbus(struct musb *musb, int is_on) musb->ops->set_vbus(musb, is_on); } +#ifndef __UBOOT__ static inline void musb_platform_enable(struct musb *musb) { if (musb->ops->enable) musb->ops->enable(musb); } +#else +static inline int musb_platform_enable(struct musb *musb) +{ + if (!musb->ops->enable) + return 0; + + return musb->ops->enable(musb); +} +#endif static inline void musb_platform_disable(struct musb *musb) { diff --git a/drivers/usb/musb-new/musb_dsps.c b/drivers/usb/musb-new/musb_dsps.c index 17ed224..8959397 100644 --- a/drivers/usb/musb-new/musb_dsps.c +++ b/drivers/usb/musb-new/musb_dsps.c @@ -156,7 +156,11 @@ struct dsps_glue { /** * dsps_musb_enable - enable interrupts */ +#ifndef __UBOOT__ static void dsps_musb_enable(struct musb *musb) +#else +static int dsps_musb_enable(struct musb *musb) +#endif { #ifndef __UBOOT__ struct device *dev = musb->controller; @@ -181,6 +185,8 @@ static void dsps_musb_enable(struct musb *musb) if (is_otg_enabled(musb)) dsps_writel(reg_base, wrp->coreintr_set, (1 << wrp->drvvbus) << wrp->usb_shift); +#else + return 0; #endif } diff --git a/drivers/usb/musb-new/musb_gadget_ep0.c b/drivers/usb/musb-new/musb_gadget_ep0.c index 5a71501..415a9f2 100644 --- a/drivers/usb/musb-new/musb_gadget_ep0.c +++ b/drivers/usb/musb-new/musb_gadget_ep0.c @@ -43,6 +43,7 @@ #else #include <common.h> #include "linux-compat.h" +#include <asm/processor.h> #endif #include "musb_core.h" diff --git a/drivers/usb/musb-new/musb_host.c b/drivers/usb/musb-new/musb_host.c index 437309c..40b9c66 100644 --- a/drivers/usb/musb-new/musb_host.c +++ b/drivers/usb/musb-new/musb_host.c @@ -2067,7 +2067,11 @@ int musb_urb_enqueue( /* precompute addressing for external hub/tt ports */ if (musb->is_multipoint) { +#ifndef __UBOOT__ struct usb_device *parent = urb->dev->parent; +#else + struct usb_device *parent = usb_dev_get_parent(urb->dev); +#endif #ifndef __UBOOT__ if (parent != hcd->self.root_hub) { diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c index d1ee5f8..9b56e90 100644 --- a/drivers/usb/musb-new/musb_uboot.c +++ b/drivers/usb/musb-new/musb_uboot.c @@ -13,6 +13,7 @@ #include "musb_core.h" #include "musb_host.h" #include "musb_gadget.h" +#include "musb_uboot.h" #ifdef CONFIG_MUSB_HOST struct int_queue { @@ -20,9 +21,9 @@ struct int_queue { struct urb urb; }; -static struct musb *host; -static struct usb_hcd hcd; -static enum usb_device_speed host_speed; +#ifndef CONFIG_DM_USB +struct musb_host_data musb_host; +#endif static void musb_host_complete_urb(struct urb *urb) { @@ -30,9 +31,6 @@ static void musb_host_complete_urb(struct urb *urb) urb->dev->act_len = urb->actual_length; } -static struct usb_host_endpoint hep; -static struct urb urb; - static void construct_urb(struct urb *urb, struct usb_host_endpoint *hep, struct usb_device *dev, int endpoint_type, unsigned long pipe, void *buffer, int len, @@ -90,38 +88,40 @@ static int submit_urb(struct usb_hcd *hcd, struct urb *urb) return urb->status; } -int submit_control_msg(struct usb_device *dev, unsigned long pipe, - void *buffer, int len, struct devrequest *setup) +static int _musb_submit_control_msg(struct musb_host_data *host, + struct usb_device *dev, unsigned long pipe, + void *buffer, int len, struct devrequest *setup) { - construct_urb(&urb, &hep, dev, USB_ENDPOINT_XFER_CONTROL, pipe, - buffer, len, setup, 0); + construct_urb(&host->urb, &host->hep, dev, USB_ENDPOINT_XFER_CONTROL, + pipe, buffer, len, setup, 0); /* Fix speed for non hub-attached devices */ - if (!dev->parent) - dev->speed = host_speed; + if (!usb_dev_get_parent(dev)) + dev->speed = host->host_speed; - return submit_urb(&hcd, &urb); + return submit_urb(&host->hcd, &host->urb); } - -int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, - void *buffer, int len) +static int _musb_submit_bulk_msg(struct musb_host_data *host, + struct usb_device *dev, unsigned long pipe, void *buffer, int len) { - construct_urb(&urb, &hep, dev, USB_ENDPOINT_XFER_BULK, pipe, - buffer, len, NULL, 0); - return submit_urb(&hcd, &urb); + construct_urb(&host->urb, &host->hep, dev, USB_ENDPOINT_XFER_BULK, + pipe, buffer, len, NULL, 0); + return submit_urb(&host->hcd, &host->urb); } -int submit_int_msg(struct usb_device *dev, unsigned long pipe, - void *buffer, int len, int interval) +static int _musb_submit_int_msg(struct musb_host_data *host, + struct usb_device *dev, unsigned long pipe, + void *buffer, int len, int interval) { - construct_urb(&urb, &hep, dev, USB_ENDPOINT_XFER_INT, pipe, + construct_urb(&host->urb, &host->hep, dev, USB_ENDPOINT_XFER_INT, pipe, buffer, len, NULL, interval); - return submit_urb(&hcd, &urb); + return submit_urb(&host->hcd, &host->urb); } -struct int_queue *create_int_queue(struct usb_device *dev, unsigned long pipe, - int queuesize, int elementsize, void *buffer, int interval) +static struct int_queue *_musb_create_int_queue(struct musb_host_data *host, + struct usb_device *dev, unsigned long pipe, int queuesize, + int elementsize, void *buffer, int interval) { struct int_queue *queue; int ret, index = usb_pipein(pipe) * 16 + usb_pipeendpoint(pipe); @@ -143,7 +143,7 @@ struct int_queue *create_int_queue(struct usb_device *dev, unsigned long pipe, construct_urb(&queue->urb, &queue->hep, dev, USB_ENDPOINT_XFER_INT, pipe, buffer, elementsize, NULL, interval); - ret = musb_urb_enqueue(&hcd, &queue->urb, 0); + ret = musb_urb_enqueue(&host->hcd, &queue->urb, 0); if (ret < 0) { printf("Failed to enqueue URB to controller\n"); free(queue); @@ -154,25 +154,27 @@ struct int_queue *create_int_queue(struct usb_device *dev, unsigned long pipe, return queue; } -int destroy_int_queue(struct usb_device *dev, struct int_queue *queue) +static int _musb_destroy_int_queue(struct musb_host_data *host, + struct usb_device *dev, struct int_queue *queue) { int index = usb_pipein(queue->urb.pipe) * 16 + usb_pipeendpoint(queue->urb.pipe); if (queue->urb.status == -EINPROGRESS) - musb_urb_dequeue(&hcd, &queue->urb, -ETIME); + musb_urb_dequeue(&host->hcd, &queue->urb, -ETIME); dev->int_pending &= ~(1 << index); free(queue); return 0; } -void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) +static void *_musb_poll_int_queue(struct musb_host_data *host, + struct usb_device *dev, struct int_queue *queue) { if (queue->urb.status != -EINPROGRESS) return NULL; /* URB has already completed in a prev. poll */ - host->isr(0, host); + host->host->isr(0, host->host); if (queue->urb.status != -EINPROGRESS) return queue->urb.transfer_buffer; /* Done */ @@ -180,9 +182,10 @@ void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) return NULL; /* URB still pending */ } -int usb_reset_root_port(void) +static int _musb_reset_root_port(struct musb_host_data *host, + struct usb_device *dev) { - void *mbase = host->mregs; + void *mbase = host->host->mregs; u8 power; power = musb_readb(mbase, MUSB_POWER); @@ -202,29 +205,33 @@ int usb_reset_root_port(void) #ifdef CONFIG_ARCH_SUNXI sunxi_usb_phy_enable_squelch_detect(0, 1); #endif - host->isr(0, host); - host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ? + host->host->isr(0, host->host); + host->host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ? USB_SPEED_HIGH : (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_FSDEV) ? USB_SPEED_FULL : USB_SPEED_LOW; - mdelay((host_speed == USB_SPEED_LOW) ? 200 : 50); + mdelay((host->host_speed == USB_SPEED_LOW) ? 200 : 50); return 0; } -int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) +int musb_lowlevel_init(struct musb_host_data *host) { void *mbase; /* USB spec says it may take up to 1 second for a device to connect */ unsigned long timeout = get_timer(0) + 1000; + int ret; - if (!host) { + if (!host->host) { printf("MUSB host is not registered\n"); return -ENODEV; } - musb_start(host); - mbase = host->mregs; + ret = musb_start(host->host); + if (ret) + return ret; + + mbase = host->host->mregs; do { if (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_HM) break; @@ -232,23 +239,135 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) if (get_timer(0) >= timeout) return -ENODEV; - usb_reset_root_port(); - host->is_active = 1; - hcd.hcd_priv = host; + _musb_reset_root_port(host, NULL); + host->host->is_active = 1; + host->hcd.hcd_priv = host->host; return 0; } +#ifndef CONFIG_DM_USB int usb_lowlevel_stop(int index) { - if (!host) { + if (!musb_host.host) { printf("MUSB host is not registered\n"); return -ENODEV; } - musb_stop(host); + musb_stop(musb_host.host); return 0; } + +int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, + void *buffer, int length) +{ + return _musb_submit_bulk_msg(&musb_host, dev, pipe, buffer, length); +} + +int submit_control_msg(struct usb_device *dev, unsigned long pipe, + void *buffer, int length, struct devrequest *setup) +{ + return _musb_submit_control_msg(&musb_host, dev, pipe, buffer, length, setup); +} + +int submit_int_msg(struct usb_device *dev, unsigned long pipe, + void *buffer, int length, int interval) +{ + return _musb_submit_int_msg(&musb_host, dev, pipe, buffer, length, interval); +} + +struct int_queue *create_int_queue(struct usb_device *dev, + unsigned long pipe, int queuesize, int elementsize, + void *buffer, int interval) +{ + return _musb_create_int_queue(&musb_host, dev, pipe, queuesize, elementsize, + buffer, interval); +} + +void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) +{ + return _musb_poll_int_queue(&musb_host, dev, queue); +} + +int destroy_int_queue(struct usb_device *dev, struct int_queue *queue) +{ + return _musb_destroy_int_queue(&musb_host, dev, queue); +} + +int usb_reset_root_port(struct usb_device *dev) +{ + return _musb_reset_root_port(&musb_host, dev); +} + +int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) +{ + return musb_lowlevel_init(&musb_host); +} +#endif /* !CONFIG_DM_USB */ + +#ifdef CONFIG_DM_USB +static int musb_submit_control_msg(struct udevice *dev, struct usb_device *udev, + unsigned long pipe, void *buffer, int length, + struct devrequest *setup) +{ + struct musb_host_data *host = dev_get_priv(dev); + return _musb_submit_control_msg(host, udev, pipe, buffer, length, setup); +} + +static int musb_submit_bulk_msg(struct udevice *dev, struct usb_device *udev, + unsigned long pipe, void *buffer, int length) +{ + struct musb_host_data *host = dev_get_priv(dev); + return _musb_submit_bulk_msg(host, udev, pipe, buffer, length); +} + +static int musb_submit_int_msg(struct udevice *dev, struct usb_device *udev, + unsigned long pipe, void *buffer, int length, + int interval) +{ + struct musb_host_data *host = dev_get_priv(dev); + return _musb_submit_int_msg(host, udev, pipe, buffer, length, interval); +} + +static struct int_queue *musb_create_int_queue(struct udevice *dev, + struct usb_device *udev, unsigned long pipe, int queuesize, + int elementsize, void *buffer, int interval) +{ + struct musb_host_data *host = dev_get_priv(dev); + return _musb_create_int_queue(host, udev, pipe, queuesize, elementsize, + buffer, interval); +} + +static void *musb_poll_int_queue(struct udevice *dev, struct usb_device *udev, + struct int_queue *queue) +{ + struct musb_host_data *host = dev_get_priv(dev); + return _musb_poll_int_queue(host, udev, queue); +} + +static int musb_destroy_int_queue(struct udevice *dev, struct usb_device *udev, + struct int_queue *queue) +{ + struct musb_host_data *host = dev_get_priv(dev); + return _musb_destroy_int_queue(host, udev, queue); +} + +static int musb_reset_root_port(struct udevice *dev, struct usb_device *udev) +{ + struct musb_host_data *host = dev_get_priv(dev); + return _musb_reset_root_port(host, udev); +} + +struct dm_usb_ops musb_usb_ops = { + .control = musb_submit_control_msg, + .bulk = musb_submit_bulk_msg, + .interrupt = musb_submit_int_msg, + .create_int_queue = musb_create_int_queue, + .poll_int_queue = musb_poll_int_queue, + .destroy_int_queue = musb_destroy_int_queue, + .reset_root_port = musb_reset_root_port, +}; +#endif /* CONFIG_DM_USB */ #endif /* CONFIG_MUSB_HOST */ #ifdef CONFIG_MUSB_GADGET @@ -309,9 +428,9 @@ int musb_register(struct musb_hdrc_platform_data *plat, void *bdata, struct musb **musbp; switch (plat->mode) { -#ifdef CONFIG_MUSB_HOST +#if defined(CONFIG_MUSB_HOST) && !defined(CONFIG_DM_USB) case MUSB_HOST: - musbp = &host; + musbp = &musb_host.host; break; #endif #ifdef CONFIG_MUSB_GADGET diff --git a/drivers/usb/musb-new/musb_uboot.h b/drivers/usb/musb-new/musb_uboot.h new file mode 100644 index 0000000..6312cd2 --- /dev/null +++ b/drivers/usb/musb-new/musb_uboot.h @@ -0,0 +1,28 @@ +/* + * MUSB OTG driver u-boot specific functions + * + * Copyright © 2015 Hans de Goede <hdegoede@redhat.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __MUSB_UBOOT_H__ +#define __MUSB_UBOOT_H__ + +#include <usb.h> +#include "linux-compat.h" +#include "usb-compat.h" +#include "musb_core.h" + +struct musb_host_data { + struct musb *host; + struct usb_hcd hcd; + enum usb_device_speed host_speed; + struct usb_host_endpoint hep; + struct urb urb; +}; + +extern struct dm_usb_ops musb_usb_ops; + +int musb_lowlevel_init(struct musb_host_data *host); + +#endif diff --git a/drivers/usb/musb-new/omap2430.c b/drivers/usb/musb-new/omap2430.c index 31a280e..77273a4 100644 --- a/drivers/usb/musb-new/omap2430.c +++ b/drivers/usb/musb-new/omap2430.c @@ -400,7 +400,11 @@ err1: return status; } +#ifndef __UBOOT__ static void omap2430_musb_enable(struct musb *musb) +#else +static int omap2430_musb_enable(struct musb *musb) +#endif { #ifndef __UBOOT__ u8 devctl; @@ -445,6 +449,7 @@ static void omap2430_musb_enable(struct musb *musb) __PRETTY_FUNCTION__); } #endif + return 0; #endif } diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c index 052e065..3a29b18 100644 --- a/drivers/usb/musb-new/sunxi.c +++ b/drivers/usb/musb-new/sunxi.c @@ -26,17 +26,12 @@ #include <asm/arch/gpio.h> #include <asm/arch/usb_phy.h> #include <asm-generic/gpio.h> +#include <dm/lists.h> +#include <dm/root.h> +#include <linux/usb/musb.h> #include "linux-compat.h" #include "musb_core.h" -#ifdef CONFIG_AXP152_POWER -#include <axp152.h> -#endif -#ifdef CONFIG_AXP209_POWER -#include <axp209.h> -#endif -#ifdef CONFIG_AXP221_POWER -#include <axp221.h> -#endif +#include "musb_uboot.h" /****************************************************************************** ****************************************************************************** @@ -199,22 +194,36 @@ static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci) /* musb_core does not call enable / disable in a balanced manner <sigh> */ static bool enabled = false; -static void sunxi_musb_enable(struct musb *musb) +static int sunxi_musb_enable(struct musb *musb) { + int ret; + pr_debug("%s():\n", __func__); if (enabled) - return; + return 0; /* select PIO mode */ musb_writeb(musb->mregs, USBC_REG_o_VEND0, 0); - if (is_host_enabled(musb)) + if (is_host_enabled(musb)) { + ret = sunxi_usb_phy_vbus_detect(0); + if (ret == 1) { + printf("A charger is plugged into the OTG: "); + return -ENODEV; + } + ret = sunxi_usb_phy_id_detect(0); + if (ret == 1) { + printf("No host cable detected: "); + return -ENODEV; + } sunxi_usb_phy_power_on(0); /* port power on */ + } USBC_ForceVbusValidToHigh(musb->mregs); enabled = true; + return 0; } static void sunxi_musb_disable(struct musb *musb) @@ -236,18 +245,9 @@ static void sunxi_musb_disable(struct musb *musb) static int sunxi_musb_init(struct musb *musb) { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - int err; pr_debug("%s():\n", __func__); - if (is_host_enabled(musb)) { - err = sunxi_usb_phy_vbus_detect(0); - if (err) { - eprintf("Error: A charger is plugged into the OTG\n"); - return -EIO; - } - } - musb->isr = sunxi_musb_interrupt; setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0); @@ -272,8 +272,86 @@ static int sunxi_musb_init(struct musb *musb) return 0; } -const struct musb_platform_ops sunxi_musb_ops = { +static const struct musb_platform_ops sunxi_musb_ops = { .init = sunxi_musb_init, .enable = sunxi_musb_enable, .disable = sunxi_musb_disable, }; + +static struct musb_hdrc_config musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 6, + .ram_bits = 11, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#if defined(CONFIG_MUSB_HOST) + .mode = MUSB_HOST, +#else + .mode = MUSB_PERIPHERAL, +#endif + .config = &musb_config, + .power = 250, + .platform_ops = &sunxi_musb_ops, +}; + +#ifdef CONFIG_MUSB_HOST +int musb_usb_probe(struct udevice *dev) +{ + struct musb_host_data *host = dev_get_priv(dev); + struct usb_bus_priv *priv = dev_get_uclass_priv(dev); + int ret; + + priv->desc_before_addr = true; + + if (!host->host) { + host->host = musb_init_controller(&musb_plat, NULL, + (void *)SUNXI_USB0_BASE); + if (!host->host) + return -EIO; + } + + ret = musb_lowlevel_init(host); + if (ret == 0) + printf("MUSB OTG\n"); + + return ret; +} + +int musb_usb_remove(struct udevice *dev) +{ + struct musb_host_data *host = dev_get_priv(dev); + + musb_stop(host->host); + + return 0; +} + +U_BOOT_DRIVER(usb_musb) = { + .name = "sunxi-musb", + .id = UCLASS_USB, + .probe = musb_usb_probe, + .remove = musb_usb_remove, + .ops = &musb_usb_ops, + .platdata_auto_alloc_size = sizeof(struct usb_platdata), + .priv_auto_alloc_size = sizeof(struct musb_host_data), +}; +#endif + +void sunxi_musb_board_init(void) +{ +#ifdef CONFIG_MUSB_HOST + struct udevice *dev; + + /* + * Bind the driver directly for now as musb linux kernel support is + * still pending upstream so our dts files do not have the necessary + * nodes yet. TODO: Remove this as soon as the dts nodes are in place + * and bind by compatible instead. + */ + device_bind_driver(dm_root(), "sunxi-musb", "sunxi-musb", &dev); +#else + musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE); +#endif +} diff --git a/drivers/usb/musb-new/usb-compat.h b/drivers/usb/musb-new/usb-compat.h index 50bad37..53fe4ff 100644 --- a/drivers/usb/musb-new/usb-compat.h +++ b/drivers/usb/musb-new/usb-compat.h @@ -1,6 +1,7 @@ #ifndef __USB_COMPAT_H__ #define __USB_COMPAT_H__ +#include <dm.h> #include "usb.h" struct usb_hcd { @@ -66,6 +67,68 @@ static inline int usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, return 0; } +#ifdef CONFIG_DM_USB +static inline u16 find_tt(struct usb_device *udev) +{ + struct udevice *parent; + struct usb_device *uparent, *ttdev; + + /* + * When called from usb-uclass.c: usb_scan_device() udev->dev points + * to the parent udevice, not the actual udevice belonging to the + * udev as the device is not instantiated yet. So when searching + * for the first usb-2 parent start with udev->dev not + * udev->dev->parent . + */ + ttdev = udev; + parent = udev->dev; + uparent = dev_get_parentdata(parent); + + while (uparent->speed != USB_SPEED_HIGH) { + struct udevice *dev = parent; + + if (device_get_uclass_id(dev->parent) != UCLASS_USB_HUB) { + printf("musb: Error cannot find high speed parent of usb-1 device\n"); + return 0; + } + + ttdev = dev_get_parentdata(dev); + parent = dev->parent; + uparent = dev_get_parentdata(parent); + } + + return (uparent->devnum << 8) | (ttdev->portnr - 1); +} + +static inline struct usb_device *usb_dev_get_parent(struct usb_device *udev) +{ + struct udevice *parent = udev->dev->parent; + + /* + * When called from usb-uclass.c: usb_scan_device() udev->dev points + * to the parent udevice, not the actual udevice belonging to the + * udev as the device is not instantiated yet. + * + * If dev is an usb-bus, then we are called from usb_scan_device() for + * an usb-device plugged directly into the root port, return NULL. + */ + if (device_get_uclass_id(udev->dev) == UCLASS_USB) + return NULL; + + /* + * If these 2 are not the same we are being called from + * usb_scan_device() and udev itself is the parent. + */ + if (dev_get_parentdata(udev->dev) != udev) + return udev; + + /* We are being called normally, use the parent pointer */ + if (device_get_uclass_id(parent) == UCLASS_USB_HUB) + return dev_get_parentdata(parent); + + return NULL; +} +#else static inline u16 find_tt(struct usb_device *dev) { u8 chid; @@ -86,4 +149,11 @@ static inline u16 find_tt(struct usb_device *dev) return (hub << 8) | chid; } + +static inline struct usb_device *usb_dev_get_parent(struct usb_device *dev) +{ + return dev->parent; +} +#endif + #endif /* __USB_COMPAT_H__ */ diff --git a/drivers/usb/phy/omap_usb_phy.c b/drivers/usb/phy/omap_usb_phy.c index 63d9301..f9069c7 100644 --- a/drivers/usb/phy/omap_usb_phy.c +++ b/drivers/usb/phy/omap_usb_phy.c @@ -223,24 +223,6 @@ void usb_phy_power(int on) } #endif /* CONFIG_AM437X_USB2PHY2_HOST */ -void omap_reset_usb_phy(struct dwc3 *dwc3_reg) -{ - /* Assert USB3 PHY reset */ - setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); - - /* Assert USB2 PHY reset */ - setbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); - - mdelay(100); - - /* Clear USB3 PHY reset */ - clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); - - /* Clear USB2 PHY reset */ - clrbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); - -} - void omap_enable_phy(struct omap_xhci *omap) { #ifdef CONFIG_OMAP_USB2PHY2_HOST diff --git a/dts/Kconfig b/dts/Kconfig index 957f5c7..09cfefb 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -56,4 +56,16 @@ config DEFAULT_DEVICE_TREE It can be overridden from the command line: $ make DEVICE_TREE=<device-tree-name> +config OF_SPL_REMOVE_PROPS + string "List of device tree properties to drop for SPL" + depends on OF_CONTROL && SPL + default "pinctrl-0 pinctrl-names clocks clock-names interrupt-parent" + help + Since SPL normally runs in a reduced memory space, the device tree + is cut down to only what is needed to load and start U-Boot. Only + nodes marked with the property "u-boot,dm-pre-reloc" will be + included. In addition, some properties are not used by U-Boot and + can be discarded. This option defines the list of properties to + discard. + endmenu diff --git a/include/_exports.h b/include/_exports.h index 279017e..74a882a 100644 --- a/include/_exports.h +++ b/include/_exports.h @@ -73,3 +73,16 @@ const char *, char **, unsigned int) EXPORT_FUNC(ustrtoull, unsigned long long, ustrtoull, const char *, char **, unsigned int) + EXPORT_FUNC(strcpy, char *, strcpy, char *dest, const char *src) + EXPORT_FUNC(mdelay, void, mdelay, unsigned long msec) +#ifdef CONFIG_PHY_AQUANTIA + EXPORT_FUNC(mdio_get_current_dev, struct mii_dev *, + mdio_get_current_dev, void) + EXPORT_FUNC(phy_find_by_mask, struct phy_device *, phy_find_by_mask, + struct mii_dev *bus, unsigned phy_mask, + phy_interface_t interface) + EXPORT_FUNC(mdio_phydev_for_ethname, struct phy_device *, + mdio_phydev_for_ethname, const char *ethname) + EXPORT_FUNC(miiphy_set_current_dev, int, miiphy_set_current_dev, + const char *devname) +#endif diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index db0550b..7ef3e25 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -116,5 +116,6 @@ typedef struct global_data { #define GD_FLG_ENV_READY 0x00080 /* Env. imported into hash table */ #define GD_FLG_SERIAL_READY 0x00100 /* Pre-reloc serial console ready */ #define GD_FLG_FULL_MALLOC_INIT 0x00200 /* Full malloc() is ready */ +#define GD_FLG_SPL_INIT 0x00400 /* spl_init() has been called */ #endif /* __ASM_GENERIC_GBL_DATA_H */ diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index de91e57..0af599f 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -322,6 +322,19 @@ struct gpio_dev_priv { const char *gpio_get_bank_info(struct udevice *dev, int *offset_count); /** + * dm_gpio_lookup_name() - Look up a named GPIO and return its description + * + * The name of a GPIO is typically its bank name followed by a number from 0. + * For example A0 is the first GPIO in bank A. Each bank is a separate driver + * model device. + * + * @name: Name to look up + * @desc: Returns description, on success + * @return 0 if OK, -ve on error + */ +int dm_gpio_lookup_name(const char *name, struct gpio_desc *desc); + +/** * gpio_lookup_name - Look up a GPIO name and return its details * * This is used to convert a named GPIO into a device, offset and GPIO @@ -421,6 +434,18 @@ int gpio_request_list_by_name(struct udevice *dev, const char *list_name, int flags); /** + * dm_gpio_request() - manually request a GPIO + * + * Note: This function should only be used for testing / debugging. Instead. + * use gpio_request_by_name() to pull GPIOs from the device tree. + * + * @desc: GPIO description of GPIO to request (see dm_gpio_lookup_name()) + * @label: Label to attach to the GPIO while claimed + * @return 0 if OK, -ve on error + */ +int dm_gpio_request(struct gpio_desc *desc, const char *label); + +/** * gpio_get_list_count() - Returns the number of GPIOs in a list * * Counts the GPIOs in a list. See gpio_request_by_name() for additional diff --git a/include/clk.h b/include/clk.h index df4570c..254ad2b 100644 --- a/include/clk.h +++ b/include/clk.h @@ -1,6 +1,86 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + #ifndef _CLK_H_ #define _CLK_H_ int soc_clk_dump(void); +struct clk_ops { + /** + * get_rate() - Get current clock rate + * + * @dev: Device to check (UCLASS_CLK) + * @return clock rate in Hz, or -ve error code + */ + ulong (*get_rate)(struct udevice *dev); + + /** + * set_rate() - Set current clock rate + * + * @dev: Device to adjust + * @rate: New clock rate in Hz + * @return new rate, or -ve error code + */ + ulong (*set_rate)(struct udevice *dev, ulong rate); + + /** + * clk_set_periph_rate() - Set clock rate for a peripheral + * + * @dev: Device to adjust (UCLASS_CLK) + * @rate: New clock rate in Hz + * @return new clock rate in Hz, or -ve error code + */ + ulong (*get_periph_rate)(struct udevice *dev, int periph); + + /** + * clk_set_periph_rate() - Set current clock rate for a peripheral + * + * @dev: Device to update (UCLASS_CLK) + * @periph: Peripheral ID to cupdate + * @return new clock rate in Hz, or -ve error code + */ + ulong (*set_periph_rate)(struct udevice *dev, int periph, ulong rate); +}; + +#define clk_get_ops(dev) ((struct clk_ops *)(dev)->driver->ops) + +/** + * clk_get_rate() - Get current clock rate + * + * @dev: Device to check (UCLASS_CLK) + * @return clock rate in Hz, or -ve error code + */ +ulong clk_get_rate(struct udevice *dev); + +/** + * set_rate() - Set current clock rate + * + * @dev: Device to adjust + * @rate: New clock rate in Hz + * @return new rate, or -ve error code + */ +ulong clk_set_rate(struct udevice *dev, ulong rate); + +/** + * clk_get_periph_rate() - Get current clock rate for a peripheral + * + * @dev: Device to check (UCLASS_CLK) + * @return clock rate in Hz, -ve error code + */ +ulong clk_get_periph_rate(struct udevice *dev, int periph); + +/** + * clk_set_periph_rate() - Set current clock rate for a peripheral + * + * @dev: Device to update (UCLASS_CLK) + * @periph: Peripheral ID to cupdate + * @return new clock rate in Hz, or -ve error code + */ +ulong clk_set_periph_rate(struct udevice *dev, int periph, ulong rate); + #endif /* _CLK_H_ */ diff --git a/include/command.h b/include/command.h index bd3fc04..6c04cd9 100644 --- a/include/command.h +++ b/include/command.h @@ -104,6 +104,8 @@ static inline int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd) extern int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +extern int do_booti(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); + extern int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc, char *const argv[]); diff --git a/include/common.h b/include/common.h index 8f4b2ec..4566bd1 100644 --- a/include/common.h +++ b/include/common.h @@ -1010,6 +1010,17 @@ int cpu_release(int nr, int argc, char * const argv[]); #define DEFINE_CACHE_ALIGN_BUFFER(type, name, size) \ DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN) +/* + * check_member() - Check the offset of a structure member + * + * @structure: Name of structure (e.g. global_data) + * @member: Name of member (e.g. baudrate) + * @offset: Expected offset in bytes + */ +#define check_member(structure, member, offset) _Static_assert( \ + offsetof(struct structure, member) == offset, \ + "`struct " #structure "` offset for `" #member "` is not " #offset) + /* Pull in stuff for the build system */ #ifdef DO_DEPS_ONLY # include <environment.h> diff --git a/include/config_fsl_secboot.h b/include/config_fsl_secboot.h index 050b157..fc6788a 100644 --- a/include/config_fsl_secboot.h +++ b/include/config_fsl_secboot.h @@ -55,6 +55,22 @@ /* For secure boot flow, default environment used will be used */ #if defined(CONFIG_SYS_RAMBOOT) +#ifdef CONFIG_BOOTSCRIPT_COPY_RAM +#define CONFIG_BS_COPY_ENV \ + "setenv bs_hdr_ram " __stringify(CONFIG_BS_HDR_ADDR_RAM)";" \ + "setenv bs_hdr_flash " __stringify(CONFIG_BS_HDR_ADDR_FLASH)";" \ + "setenv bs_hdr_size " __stringify(CONFIG_BS_HDR_SIZE)";" \ + "setenv bs_ram " __stringify(CONFIG_BS_ADDR_RAM)";" \ + "setenv bs_flash " __stringify(CONFIG_BS_ADDR_FLASH)";" \ + "setenv bs_size " __stringify(CONFIG_BS_SIZE)";" + +#if defined(CONFIG_RAMBOOT_NAND) +#define CONFIG_BS_COPY_CMD \ + "nand read $bs_hdr_ram $bs_hdr_flash $bs_hdr_size ;" \ + "nand read $bs_ram $bs_flash $bs_size ;" +#endif /* CONFIG_RAMBOOT_NAND */ +#endif /* CONFIG_BOOTSCRIPT_COPY_RAM */ + #if defined(CONFIG_RAMBOOT_SPIFLASH) #undef CONFIG_ENV_IS_IN_SPI_FLASH #elif defined(CONFIG_RAMBOOT_NAND) @@ -68,6 +84,17 @@ #define CONFIG_ENV_IS_NOWHERE +#ifndef CONFIG_BS_COPY_ENV +#define CONFIG_BS_COPY_ENV +#endif + +#ifndef CONFIG_BS_COPY_CMD +#define CONFIG_BS_COPY_CMD +#endif + +#define CONFIG_SECBOOT_CMD CONFIG_BS_COPY_ENV \ + CONFIG_BS_COPY_CMD \ + CONFIG_SECBOOT /* * We don't want boot delay for secure boot flow * before autoboot starts @@ -75,7 +102,7 @@ #undef CONFIG_BOOTDELAY #define CONFIG_BOOTDELAY 0 #undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND CONFIG_SECBOOT +#define CONFIG_BOOTCOMMAND CONFIG_SECBOOT_CMD /* * CONFIG_ZERO_BOOTDELAY_CHECK should not be defined for diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index f99663a..bde71fb 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -11,12 +11,6 @@ #ifndef __T1024RDB_H #define __T1024RDB_H -#if defined(CONFIG_T1023RDB) -#ifdef CONFIG_SPL -#define CONFIG_SYS_NO_FLASH -#endif -#endif - /* High Level Configuration Options */ #define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO @@ -320,7 +314,7 @@ unsigned long get_board_ddr_clk(void); #if defined(CONFIG_T1024RDB) #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 #elif defined(CONFIG_T1023RDB) -#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ +#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(0) | \ CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN) #endif #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ @@ -395,7 +389,9 @@ unsigned long get_board_ddr_clk(void); | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) #elif defined(CONFIG_T1023RDB) -#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_RAL_3 /* RAL 3Bytes */ \ +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | CSOR_NAND_RAL_3 /* RAL 3Bytes */ \ | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ | CSOR_NAND_SPRZ_128 /* Spare size = 128 */ \ @@ -557,9 +553,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 -#define I2C_MUX_PCA_ADDR 0x77 -#define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ - +#define I2C_PCA6408_BUS_NUM 1 +#define I2C_PCA6408_ADDR 0x20 /* I2C bus multiplexer */ #define I2C_MUX_CH_DEFAULT 0x8 @@ -757,8 +752,10 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_DPAA_FMAN +#ifdef CONFIG_T1024RDB #define CONFIG_QE #define CONFIG_U_QE +#endif /* Default address of microcode for the Linux FMan driver */ #if defined(CONFIG_SPIFLASH) /* diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 16d2e0e..e88cad6 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -29,6 +29,14 @@ #ifdef CONFIG_T1042RDB #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg #endif +#ifdef CONFIG_T1040D4RDB +#define CONFIG_SYS_FSL_PBL_RCW \ +$(SRCTREE)/board/freescale/t104xrdb/t1040d4_rcw.cfg +#endif +#ifdef CONFIG_T1042D4RDB +#define CONFIG_SYS_FSL_PBL_RCW \ +$(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg +#endif #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT @@ -220,7 +228,9 @@ #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_DDR_SPD +#ifndef CONFIG_SYS_FSL_DDR4 #define CONFIG_SYS_FSL_DDR3 +#endif #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x51 @@ -278,8 +288,23 @@ #define CPLD_LBMAP_DFLTBANK 0x40 /* BANK OR | BANK0 */ #define CPLD_LBMAP_RESET 0xFF #define CPLD_LBMAP_SHIFT 0x03 -#ifdef CONFIG_T1042RDB_PI + +#if defined(CONFIG_T1042RDB_PI) #define CPLD_DIU_SEL_DFP 0x80 +#elif defined(CONFIG_T1042D4RDB) +#define CPLD_DIU_SEL_DFP 0xc0 +#endif + +#if defined(CONFIG_T1040D4RDB) +#define CPLD_INT_MASK_ALL 0xFF +#define CPLD_INT_MASK_THERM 0x80 +#define CPLD_INT_MASK_DVI_DFP 0x40 +#define CPLD_INT_MASK_QSGMII1 0x20 +#define CPLD_INT_MASK_QSGMII2 0x10 +#define CPLD_INT_MASK_SGMI1 0x08 +#define CPLD_INT_MASK_SGMI2 0x04 +#define CPLD_INT_MASK_TDMR1 0x02 +#define CPLD_INT_MASK_TDMR2 0x01 #endif #define CONFIG_SYS_CPLD_BASE 0xffdf0000 @@ -447,7 +472,7 @@ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#ifdef CONFIG_T1042RDB_PI +#if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T1042D4RDB) /* Video */ #define CONFIG_FSL_DIU_FB @@ -492,11 +517,11 @@ /* I2C bus multiplexer */ #define I2C_MUX_PCA_ADDR 0x70 -#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) +#if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB) #define I2C_MUX_CH_DEFAULT 0x8 #endif -#ifdef CONFIG_T1042RDB_PI +#if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T104XD4RDB) /* LDI/DVI Encoder for display */ #define CONFIG_SYS_I2C_LDI_ADDR 0x38 #define CONFIG_SYS_I2C_DVI_ADDR 0x75 @@ -664,7 +689,7 @@ #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME -#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) +#if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB) #define CONFIG_QE #define CONFIG_U_QE #endif @@ -693,7 +718,7 @@ #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #endif -#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) +#if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB) #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_QE_FW_ADDR 0x130000 #elif defined(CONFIG_SDCARD) @@ -718,17 +743,32 @@ #ifdef CONFIG_FMAN_ENET #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) -#define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 +#define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 +#elif defined(CONFIG_T1040D4RDB) || defined(CONFIG_T1042D4RDB) +#define CONFIG_SYS_SGMII1_PHY_ADDR 0x02 +#define CONFIG_SYS_SGMII2_PHY_ADDR 0x03 +#define CONFIG_SYS_SGMII3_PHY_ADDR 0x01 +#endif + +#ifdef CONFIG_T104XD4RDB +#define CONFIG_SYS_RGMII1_PHY_ADDR 0x04 +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x05 +#else +#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 #endif -#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 -#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 /* Enable VSC9953 L2 Switch driver on T1040 SoC */ -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB) #define CONFIG_VSC9953 #define CONFIG_VSC9953_CMD +#ifdef CONFIG_T1040RDB #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x04 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x08 +#else +#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x08 +#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x0c +#endif #endif #define CONFIG_MII /* MII PHY management */ @@ -836,6 +876,10 @@ #define FDTFILE "t1042rdb_pi/t1042rdb_pi.dtb" #elif defined(CONFIG_T1042RDB) #define FDTFILE "t1042rdb/t1042rdb.dtb" +#elif defined(CONFIG_T1040D4RDB) +#define FDTFILE "t1042rdb/t1040d4rdb.dtb" +#elif defined(CONFIG_T1042D4RDB) +#define FDTFILE "t1042rdb/t1042d4rdb.dtb" #endif #ifdef CONFIG_FSL_DIU_FB diff --git a/include/configs/adp-ag101.h b/include/configs/adp-ag101.h index 4d52ba1..141fc99 100644 --- a/include/configs/adp-ag101.h +++ b/include/configs/adp-ag101.h @@ -9,7 +9,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/arch/ag101.h> +#include <asm/arch-ag101/ag101.h> /* * CPU and Board Configuration Options diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index 06860b5..4296c6b 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -9,7 +9,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/arch/ag101.h> +#include <asm/arch-ag101/ag101.h> /* * CPU and Board Configuration Options diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h index 026696c..0c7573a 100644 --- a/include/configs/adp-ag102.h +++ b/include/configs/adp-ag102.h @@ -8,7 +8,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/arch/ag102.h> +#include <asm/arch-ag102/ag102.h> /* * CPU and Board Configuration Options diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 035c156..633391b 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -287,7 +287,7 @@ #define CONFIG_MUSB_PIO_ONLY #define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_USB_GADGET -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_MUSB_HOST @@ -298,10 +298,11 @@ #ifndef CONFIG_SPL_USBETH_SUPPORT /* Fastboot */ +#define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_ANDROID_BOOT_IMAGE -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 /* To support eMMC booting */ #define CONFIG_STORAGE_EMMC @@ -344,7 +345,7 @@ /* USB Device Firmware Update support */ #ifndef CONFIG_SPL_BUILD -#define CONFIG_DFU_FUNCTION +#define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC #define CONFIG_CMD_DFU #define DFU_ALT_INFO_MMC \ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index b90a60d..e9808a7 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -42,6 +42,8 @@ #define CONFIG_MISC_INIT_R +#define CONFIG_OF_LIBFDT + #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 33e534a..d148169 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -80,7 +80,7 @@ #endif /* Now bring in the rest of the common code. */ -#include <configs/ti_armv7_common.h> +#include <configs/ti_armv7_omap.h> /* Always 64 KiB env size */ #define CONFIG_ENV_SIZE (64 << 10) @@ -110,6 +110,7 @@ #define CONFIG_CMD_USB #define CONFIG_USB_HOST #define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_XHCI_OMAP #define CONFIG_USB_STORAGE #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 @@ -127,7 +128,7 @@ #define CONFIG_USB_DWC3_GADGET #define CONFIG_USB_GADGET -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #define CONFIG_G_DNL_VENDOR_NUM 0x0403 @@ -137,7 +138,7 @@ #ifndef CONFIG_SPL_BUILD /* USB Device Firmware Update support */ -#define CONFIG_DFU_FUNCTION +#define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_RAM #define CONFIG_CMD_DFU diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 741fb05..fa32fa4 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -444,7 +444,7 @@ DEFAULT_LINUX_BOOT_ENV \ #define CONFIG_MUSB_PIO_ONLY #define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_USB_GADGET -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_MUSB_HOST @@ -455,10 +455,11 @@ DEFAULT_LINUX_BOOT_ENV \ #ifndef CONFIG_SPL_USBETH_SUPPORT /* Fastboot */ +#define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_ANDROID_BOOT_IMAGE -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 /* To support eMMC booting */ #define CONFIG_STORAGE_EMMC @@ -472,7 +473,7 @@ DEFAULT_LINUX_BOOT_ENV \ #ifdef CONFIG_MUSB_GADGET #define CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USB_FUNCTION_MASS_STORAGE /* USB TI's IDs */ #define CONFIG_G_DNL_VENDOR_NUM 0x0451 @@ -494,7 +495,7 @@ DEFAULT_LINUX_BOOT_ENV \ /* USB Device Firmware Update support */ #ifndef CONFIG_SPL_BUILD -#define CONFIG_DFU_FUNCTION +#define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC #define CONFIG_CMD_DFU #define DFU_ALT_INFO_MMC \ diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h index 8f0f7f0..b7c5716 100644 --- a/include/configs/bcm28155_ap.h +++ b/include/configs/bcm28155_ap.h @@ -108,6 +108,7 @@ * for example. */ #define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION /* version string, parser, etc */ #define CONFIG_VERSION_VARIABLE @@ -133,4 +134,23 @@ #define CONFIG_FAT_WRITE +/* Fastboot and USB OTG */ +#define CONFIG_USB_FUNCTION_FASTBOOT +#define CONFIG_CMD_FASTBOOT +#define CONFIG_FASTBOOT_FLASH +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M) +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 0 +#define CONFIG_USB_GADGET_S3C_UDC_OTG +#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY +#define CONFIG_USB_GADGET_DOWNLOAD +#define CONFIG_USBID_ADDR 0x34052c46 +#define CONFIG_G_DNL_VENDOR_NUM 0x18d1 /* google */ +#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */ +#define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation" + #endif /* __BCM28155_AP_H */ diff --git a/include/configs/beagle_x15.h b/include/configs/beagle_x15.h index 17fdded..d38b7b5 100644 --- a/include/configs/beagle_x15.h +++ b/include/configs/beagle_x15.h @@ -68,6 +68,7 @@ /* USB xHCI HOST */ #define CONFIG_CMD_USB #define CONFIG_USB_HOST +#define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_OMAP #define CONFIG_USB_STORAGE diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index f2f8e2e..ab8d293 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -257,16 +257,16 @@ #define CONFIG_G_DNL_PRODUCT_NUM CONFIG_TRDX_PID_COLIBRI_VF50 /* USB DFU */ -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_CMD_DFU -#define CONFIG_DFU_FUNCTION +#define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_NAND #define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024) /* USB Storage */ #define CONFIG_USB_STORAGE -#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_CMD_USB_MASS_STORAGE /* Enable SPI support */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 88750e0..9aaa0f5 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -16,6 +16,14 @@ #include "../board/freescale/common/ics307_clk.h" #ifdef CONFIG_RAMBOOT_PBL +#ifdef CONFIG_SECURE_BOOT +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#ifdef CONFIG_NAND +#define CONFIG_RAMBOOT_NAND +#endif +#define CONFIG_BOOTSCRIPT_COPY_RAM +#else #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg @@ -29,6 +37,7 @@ #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg #endif #endif +#endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE /* Set 1M boot space */ diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index a429107..739c2bf 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -11,6 +11,7 @@ * High Level Configuration Options (easy to change) */ #define CONFIG_ARMADA_XP /* SOC Family Name */ +#define CONFIG_ARMADA_38X #define CONFIG_DB_88F6820_GP /* Board target name for DDR training */ #define CONFIG_SYS_L2_PL310 @@ -108,6 +109,68 @@ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" +/* SPL */ +/* + * Select the boot device here + * + * Currently supported are: + * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash + * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1) + */ +#define SPL_BOOT_SPI_NOR_FLASH 1 +#define SPL_BOOT_SDIO_MMC_CARD 2 +#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH + +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_SIZE (140 << 10) +#define CONFIG_SPL_TEXT_BASE 0x40000030 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ + CONFIG_SPL_BSS_MAX_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE (16 << 10) + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT + +#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS +#endif + +#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD +/* SPL related MMC defines */ +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 +#define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512) +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS ((512 << 10) / 512) /* 512KiB */ +#ifdef CONFIG_SPL_BUILD +#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ +#endif +#endif + +/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ +#define CONFIG_SYS_MVEBU_DDR_A38X +#define CONFIG_DDR3 + /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index c33a588..41e6fdc 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -27,6 +27,7 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE #define CONFIG_CMD_PING #define CONFIG_CMD_SF #define CONFIG_CMD_SPI @@ -60,6 +61,34 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ #define CONFIG_SYS_ALT_MEMTEST +/* SATA support */ +#ifdef CONFIG_CMD_IDE +#define __io +#define CONFIG_IDE_PREINIT +#define CONFIG_MVSATA_IDE + +/* Needs byte-swapping for ATA data register */ +#define CONFIG_IDE_SWAP_IO + +#define CONFIG_SYS_ATA_REG_OFFSET 0x0100 /* Offset for register access */ +#define CONFIG_SYS_ATA_DATA_OFFSET 0x0100 /* Offset for data I/O */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 + +/* Each 8-bit ATA register is aligned to a 4-bytes address */ +#define CONFIG_SYS_ATA_STRIDE 4 + +/* CONFIG_CMD_IDE requires some #defines for ATA registers */ +#define CONFIG_SYS_IDE_MAXBUS 2 +#define CONFIG_SYS_IDE_MAXDEVICE CONFIG_SYS_IDE_MAXBUS + +/* ATA registers base is at SATA controller base */ +#define CONFIG_SYS_ATA_BASE_ADDR MVEBU_AXP_SATA_BASE +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x2000 +#define CONFIG_SYS_ATA_IDE1_OFFSET 0x4000 + +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_CMD_IDE */ + /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros @@ -109,7 +138,7 @@ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ -#define CONFIG_SYS_MVEBU_DDR +#define CONFIG_SYS_MVEBU_DDR_AXP #define CONFIG_SPD_EEPROM 0x4e #endif /* _CONFIG_DB_MV7846MP_GP_H */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index d84427d..7499447 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -89,10 +89,11 @@ DFU_ALT_INFO_RAM /* Fastboot */ +#define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_ANDROID_BOOT_IMAGE -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x2F000000 +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_FASTBOOT_BUF_SIZE 0x2F000000 #define CONFIG_FASTBOOT_FLASH #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 #endif @@ -175,6 +176,7 @@ #define CONFIG_CMD_USB #define CONFIG_USB_HOST #define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_XHCI_OMAP #define CONFIG_USB_STORAGE #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 @@ -189,7 +191,7 @@ #define CONFIG_USB_DWC3_GADGET #define CONFIG_USB_GADGET -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #define CONFIG_G_DNL_VENDOR_NUM 0x0451 @@ -197,7 +199,7 @@ #define CONFIG_USB_GADGET_DUALSPEED /* USB Device Firmware Update support */ -#define CONFIG_DFU_FUNCTION +#define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_RAM #define CONFIG_CMD_DFU diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index 08e2009..ec1f882 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -28,13 +28,13 @@ #define CONFIG_CMD_GPT /* USB Composite download gadget - g_dnl */ -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_DOWNLOAD /* TIZEN THOR downloader support */ #define CONFIG_CMD_THOR_DOWNLOAD -#define CONFIG_THOR_FUNCTION +#define CONFIG_USB_FUNCTION_THOR -#define CONFIG_DFU_FUNCTION +#define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M #define DFU_DEFAULT_POLL_TIMEOUT 300 @@ -57,7 +57,7 @@ #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USB_FUNCTION_MASS_STORAGE /* Common environment variables */ #define CONFIG_EXTRA_ENV_ITB \ diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 5476248..e04dec7 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -182,6 +182,7 @@ /* USB */ #define CONFIG_CMD_USB #define CONFIG_USB_STORAGE +#define CONFIG_USB_XHCI_DWC3 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index df1ff43..7c90812 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -200,8 +200,8 @@ /* USB Mass Storage Gadget */ #define CONFIG_USB_GADGET #define CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USB_GADGET_MASS_STORAGE -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_FUNCTION_MASS_STORAGE +#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_VBUS_DRAW 2 /* Netchip IDs */ diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h index a28ceb7..4f4ebf5 100644 --- a/include/configs/k2e_evm.h +++ b/include/configs/k2e_evm.h @@ -15,19 +15,17 @@ #define CONFIG_K2E_EVM /* U-Boot general configuration */ -#define CONFIG_SYS_PROMPT "K2E EVM # " - #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ "addr_mon=0x0c140000\0" \ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \ - "name_fdt=uImage-k2e-evm.dtb\0" \ - "name_mon=skern-k2e-evm.bin\0" \ + "name_fdt=k2e-evm.dtb\0" \ + "name_mon=skern-k2e.bin\0" \ "name_ubi=k2e-evm-ubifs.ubi\0" \ "name_uboot=u-boot-spi-k2e-evm.gph\0" \ "name_fs=arago-console-image-k2e-evm.cpio.gz\0" -#include <configs/ks2_evm.h> +#include <configs/ti_armv7_keystone2.h> /* SPL SPI Loader Configuration */ #define CONFIG_SPL_TEXT_BASE 0x0c100000 diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index eae7721..6c6dcb1 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -15,19 +15,17 @@ #define CONFIG_K2HK_EVM /* U-Boot general configuration */ -#define CONFIG_SYS_PROMPT "K2HK EVM # " - #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ "addr_mon=0x0c5f0000\0" \ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \ - "name_fdt=uImage-k2hk-evm.dtb\0" \ - "name_mon=skern-k2hk-evm.bin\0" \ + "name_fdt=k2hk-evm.dtb\0" \ + "name_mon=skern-k2hk.bin\0" \ "name_ubi=k2hk-evm-ubifs.ubi\0" \ "name_uboot=u-boot-spi-k2hk-evm.gph\0" \ "name_fs=arago-console-image-k2hk-evm.cpio.gz\0" -#include <configs/ks2_evm.h> +#include <configs/ti_armv7_keystone2.h> /* SPL SPI Loader Configuration */ #define CONFIG_SPL_TEXT_BASE 0x0c200000 diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h index 57da057..9bacfa4 100644 --- a/include/configs/k2l_evm.h +++ b/include/configs/k2l_evm.h @@ -15,19 +15,17 @@ #define CONFIG_K2L_EVM /* U-Boot general configuration */ -#define CONFIG_SYS_PROMPT "K2L EVM # " - #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ "addr_mon=0x0c140000\0" \ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,4096\0" \ - "name_fdt=uImage-k2l-evm.dtb\0" \ - "name_mon=skern-k2l-evm.bin\0" \ + "name_fdt=k2l-evm.dtb\0" \ + "name_mon=skern-k2l.bin\0" \ "name_ubi=k2l-evm-ubifs.ubi\0" \ "name_uboot=u-boot-spi-k2l-evm.gph\0" \ "name_fs=arago-console-image-k2l-evm.cpio.gz\0" -#include <configs/ks2_evm.h> +#include <configs/ti_armv7_keystone2.h> /* SPL SPI Loader Configuration */ #define CONFIG_SPL_TEXT_BASE 0x0c100000 diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 8a5a707..13f9338 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -9,6 +9,8 @@ #define CONFIG_LS102XA +#define CONFIG_ARMV7_PSCI + #define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_CPUINFO @@ -430,19 +432,31 @@ unsigned long get_board_ddr_clk(void); /* * USB */ -#define CONFIG_HAS_FSL_DR_USB +/* EHCI Support - disbaled by default */ +/*#define CONFIG_HAS_FSL_DR_USB*/ #ifdef CONFIG_HAS_FSL_DR_USB #define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#endif + +/*XHCI Support - enabled by default*/ +#define CONFIG_HAS_FSL_XHCI_USB -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_HAS_FSL_XHCI_USB +#define CONFIG_USB_XHCI_FSL +#define CONFIG_USB_XHCI_DWC3 +#define CONFIG_USB_XHCI +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 +#endif + +#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB) #define CONFIG_CMD_USB #define CONFIG_USB_STORAGE -#define CONFIG_USB_EHCI_FSL -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_CMD_EXT2 #endif -#endif /* * Video diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 233b3d0..cf2aaa3 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -9,6 +9,8 @@ #define CONFIG_LS102XA +#define CONFIG_ARMV7_PSCI + #define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_CPUINFO @@ -26,6 +28,44 @@ #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE /* + * USB + */ + +/* + * EHCI Support - disbaled by default as + * there is no signal coming out of soc on + * this board for this controller. However, + * the silicon still has this controller, + * and anyone can use this controller by + * taking signals out on their board. + */ + +/*#define CONFIG_HAS_FSL_DR_USB*/ + +#ifdef CONFIG_HAS_FSL_DR_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#endif + +/* XHCI Support - enabled by default */ +#define CONFIG_HAS_FSL_XHCI_USB + +#ifdef CONFIG_HAS_FSL_XHCI_USB +#define CONFIG_USB_XHCI_FSL +#define CONFIG_USB_XHCI_DWC3 +#define CONFIG_USB_XHCI +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 +#endif + +#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB) +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_EXT2 +#endif + +/* * Generic Timer Definitions */ #define GENERIC_TIMER_CLK 12500000 diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 72ba3b3..5afee55 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -19,6 +19,7 @@ #define CONFIG_ARM_ERRATA_828024 #define CONFIG_ARM_ERRATA_826974 +#include <asm/arch-fsl-lsch3/ls2085a_stream_id.h> #include <asm/arch-fsl-lsch3/config.h> #if (defined(CONFIG_SYS_FSL_SRDS_1) || defined(CONFIG_SYS_FSL_SRDS_2)) #define CONFIG_SYS_HAS_SERDES @@ -163,21 +164,30 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_NAND_BASE_PHYS 0x30000000 /* Debug Server firmware */ -#define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) +#define CONFIG_FSL_DEBUG_SERVER /* 2 sec timeout */ #define CONFIG_SYS_DEBUG_SERVER_TIMEOUT (2 * 1000 * 1000) /* MC firmware */ #define CONFIG_FSL_MC_ENET -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ #define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 #define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 +#define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 +#define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 -/* Carve out a DDR region which will not be used by u-boot/Linux */ +/* + * Carve out a DDR region which will not be used by u-boot/Linux + * + * It will be used by MC and Debug Server. The MC region must be + * 512MB aligned, so the min size to hide is 512MB. + */ #if defined(CONFIG_FSL_MC_ENET) || defined(CONFIG_FSL_DEBUG_SERVER) +#define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE (256UL * 1024 * 1024) +#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (256UL * 1024 * 1024) +#define CONFIG_SYS_MEM_TOP_HIDE_MIN (512UL * 1024 * 1024) #define CONFIG_SYS_MEM_TOP_HIDE get_dram_size_to_hide() #endif @@ -186,7 +196,8 @@ unsigned long long get_qixis_addr(void); #define CONFIG_PCIE2 /* PCIE controler 2 */ #define CONFIG_PCIE3 /* PCIE controler 3 */ #define CONFIG_PCIE4 /* PCIE controler 4 */ -#define FSL_PCIE_COMPAT "fsl,20851a-pcie" +#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ +#define FSL_PCIE_COMPAT "fsl,ls2085a-pcie" #define CONFIG_SYS_PCI_64BIT @@ -236,13 +247,13 @@ unsigned long long get_qixis_addr(void); "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x581200000\0" \ "kernel_load=0xa0000000\0" \ - "kernel_size=0x1000000\0" \ + "kernel_size=0x2800000\0" \ "console=ttyAMA0,38400n8\0" #define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ "earlycon=uart8250,mmio,0x21c0600,115200 " \ - "default_hugepagesz=2m hugepagesz=2m " \ - "hugepages=16" + "ramdisk_size=0x2000000 default_hugepagesz=2m" \ + " hugepagesz=2m hugepages=16" #define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ "$kernel_size && bootm $kernel_load" #define CONFIG_BOOTDELAY 10 @@ -289,4 +300,7 @@ unsigned long get_dram_size_to_hide(void); #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + + #endif /* __LS2_COMMON_H */ diff --git a/include/configs/ls2085aqds.h b/include/configs/ls2085aqds.h index e488ac8..a6ef356 100644 --- a/include/configs/ls2085aqds.h +++ b/include/configs/ls2085aqds.h @@ -9,9 +9,6 @@ #include "ls2085a_common.h" -#define CONFIG_IDENT_STRING " LS2085A-QDS" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-QDS" - #define CONFIG_DISPLAY_BOARDINFO #ifndef __ASSEMBLY__ @@ -263,6 +260,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_LS_MC_DPC_ADDR 0x580800000ULL #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 +#define CONFIG_SYS_LS_MC_AIOP_IMG_IN_NOR +#define CONFIG_SYS_LS_MC_AIOP_IMG_ADDR 0x580900000ULL /* * I2C @@ -273,6 +272,15 @@ unsigned long get_board_ddr_clk(void); /* I2C bus multiplexer */ #define I2C_MUX_CH_DEFAULT 0x8 +/* SPI */ +#ifdef CONFIG_FSL_DSPI +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SST +#define CONFIG_SPI_FLASH_EON +#endif + /* * MMC */ @@ -287,6 +295,7 @@ unsigned long get_board_ddr_clk(void); #define RTC #define CONFIG_RTC_DS3231 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_CMD_DATE /* EEPROM */ #define CONFIG_ID_EEPROM @@ -332,7 +341,7 @@ unsigned long get_board_ddr_clk(void); "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x581100000\0" \ "kernel_load=0xa0000000\0" \ - "kernel_size=0x1000000\0" + "kernel_size=0x28000000\0" #ifdef CONFIG_FSL_MC_ENET #define CONFIG_FSL_MEMAC diff --git a/include/configs/ls2085ardb.h b/include/configs/ls2085ardb.h index 600261e..41eb55b 100644 --- a/include/configs/ls2085ardb.h +++ b/include/configs/ls2085ardb.h @@ -8,8 +8,6 @@ #define __LS2_RDB_H #include "ls2085a_common.h" -#define CONFIG_IDENT_STRING " LS2085A-RDB" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-RDB" #undef CONFIG_CONS_INDEX #define CONFIG_CONS_INDEX 2 @@ -30,8 +28,8 @@ unsigned long get_board_sys_clk(void); #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 -#define SPD_EEPROM_ADDRESS3 0x54 -#define SPD_EEPROM_ADDRESS4 0x53 /* Board error */ +#define SPD_EEPROM_ADDRESS3 0x53 +#define SPD_EEPROM_ADDRESS4 0x54 #define SPD_EEPROM_ADDRESS5 0x55 #define SPD_EEPROM_ADDRESS6 0x56 /* dummy address */ #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 @@ -235,22 +233,33 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_LS_MC_DPC_ADDR 0x580800000ULL #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 +#define CONFIG_SYS_LS_MC_AIOP_IMG_IN_NOR +#define CONFIG_SYS_LS_MC_AIOP_IMG_ADDR 0x580900000ULL /* * I2C */ -#define I2C_MUX_PCA_ADDR 0x77 -#define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ +#define I2C_MUX_PCA_ADDR 0x75 +#define I2C_MUX_PCA_ADDR_PRI 0x75 /* Primary Mux*/ /* I2C bus multiplexer */ #define I2C_MUX_CH_DEFAULT 0x8 +/* SPI */ +#ifdef CONFIG_FSL_DSPI +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_BAR +#endif + /* * RTC configuration */ #define RTC #define CONFIG_RTC_DS3231 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_CMD_DATE /* EEPROM */ #define CONFIG_ID_EEPROM @@ -284,6 +293,8 @@ unsigned long get_board_sys_clk(void); #define CONFIG_DOS_PARTITION #endif +#define CONFIG_MISC_INIT_R + /* Initial environment variables */ #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -296,6 +307,30 @@ unsigned long get_board_sys_clk(void); "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x581100000\0" \ "kernel_load=0xa0000000\0" \ - "kernel_size=0x1000000\0" + "kernel_size=0x2800000\0" + +/* MAC/PHY configuration */ +#ifdef CONFIG_FSL_MC_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_CORTINA +#define CONFIG_PHYLIB +#define CONFIG_SYS_CORTINA_FW_IN_NOR +#define CONFIG_CORTINA_FW_ADDR 0x581000000 +#define CONFIG_CORTINA_FW_LENGTH 0x40000 + +#define CORTINA_PHY_ADDR1 0x10 +#define CORTINA_PHY_ADDR2 0x11 +#define CORTINA_PHY_ADDR3 0x12 +#define CORTINA_PHY_ADDR4 0x13 +#define AQ_PHY_ADDR1 0x00 +#define AQ_PHY_ADDR2 0x01 +#define AQ_PHY_ADDR3 0x02 +#define AQ_PHY_ADDR4 0x03 + +#define CONFIG_MII +#define CONFIG_ETHPRIME "DPNI1" +#define CONFIG_PHY_GIGE +#define CONFIG_PHY_AQUANTIA +#endif #endif /* __LS2_RDB_H */ diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index 4826044..0fb117f 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -108,7 +108,7 @@ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ -#define CONFIG_SYS_MVEBU_DDR +#define CONFIG_SYS_MVEBU_DDR_AXP #define CONFIG_DDR_FIXED_SIZE (1 << 20) /* 1GiB */ #endif /* _CONFIG_DB_MV7846MP_GP_H */ diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h index af36ac5..4781e79 100644 --- a/include/configs/minnowmax.h +++ b/include/configs/minnowmax.h @@ -60,9 +60,6 @@ #define CONFIG_FIT_SIGNATURE #define CONFIG_RSA -/* Avoid a warning in the Realtek Ethernet driver */ -#define CONFIG_SYS_CACHELINE_SIZE 16 - #define CONFIG_ENV_SECT_SIZE 0x1000 #define CONFIG_ENV_OFFSET 0x007fe000 diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index b654fff..b90de14 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -95,7 +95,7 @@ #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ /* ====> Include platform Common Definitions */ #include <asm/arch/config.h> diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 6722c9d..6a57841 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -231,8 +231,8 @@ #define CONFIG_USB_GADGET #define CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USB_GADGET_MASS_STORAGE -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_FUNCTION_MASS_STORAGE +#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_VENDOR_NUM 0x0525 diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 2e81ad4..dd4cb0f 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -332,8 +332,8 @@ #define CONFIG_USB_GADGET #define CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USB_GADGET_MASS_STORAGE -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_FUNCTION_MASS_STORAGE +#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_VBUS_DRAW 2 /* Netchip IDs */ @@ -341,9 +341,10 @@ #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 #define CONFIG_G_DNL_MANUFACTURER "Boundary" +#define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_ANDROID_BOOT_IMAGE -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 #endif /* __CONFIG_H */ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index efc583f..6e3ce4d 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -109,7 +109,7 @@ /* USB */ #define CONFIG_MUSB_UDC -#define CONFIG_MUSB_HDC +#define CONFIG_MUSB_HCD #define CONFIG_USB_OMAP3 #define CONFIG_TWL4030_USB diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index cf17f3d..8d5c736 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -60,10 +60,10 @@ #define CONFIG_G_DNL_VENDOR_NUM 0x04E8 #define CONFIG_G_DNL_PRODUCT_NUM 0x6601 #define CONFIG_G_DNL_MANUFACTURER "Samsung" -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_DOWNLOAD /* DFU */ -#define CONFIG_DFU_FUNCTION +#define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC #define CONFIG_CMD_DFU #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M @@ -72,13 +72,13 @@ /* THOR */ #define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM #define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D -#define CONFIG_THOR_FUNCTION +#define CONFIG_USB_FUNCTION_THOR #define CONFIG_CMD_THOR_DOWNLOAD /* UMS */ #define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 -#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_CMD_USB_MASS_STORAGE /* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index e574742..804e307 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -68,14 +68,15 @@ #define CONFIG_USB_ETHER_RNDIS #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_VBUS_DRAW 0 -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_G_DNL_VENDOR_NUM 0x0451 #define CONFIG_G_DNL_PRODUCT_NUM 0xd022 #define CONFIG_G_DNL_MANUFACTURER "TI" +#define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_ANDROID_BOOT_IMAGE -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 /* USB EHCI */ #define CONFIG_CMD_USB diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 76bf3b6..a1a90ec 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -105,7 +105,7 @@ "defaultdisplay=dvi\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ + "mmcrootfstype=ext4 rootwait\0" \ "nandroot=ubi0:rootfs ubi.mtd=4\0" \ "nandrootfstype=ubifs\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ diff --git a/include/configs/p2571.h b/include/configs/p2571.h new file mode 100644 index 0000000..77faf5f --- /dev/null +++ b/include/configs/p2571.h @@ -0,0 +1,75 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _P2571_H +#define _P2571_H + +#include <linux/sizes.h> + +/* enable PMIC */ +#define CONFIG_MAX77620_POWER + +#include "tegra210-common.h" + +/* High-level configuration options */ +#define V_PROMPT "Tegra210 (P2571) # " +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2571" + +/* Board-specific serial config */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_TEGRA_ENABLE_UARTA +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE + +/* I2C */ +#define CONFIG_SYS_I2C_TEGRA +#define CONFIG_CMD_I2C + +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_TEGRA_MMC +#define CONFIG_CMD_MMC + +/* Environment in eMMC, at the end of 2nd "boot sector" */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) + +/* SPI */ +#define CONFIG_TEGRA114_SPI /* Compatible w/ Tegra114 SPI */ +#define CONFIG_TEGRA114_SPI_CTRLS 6 +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 24000000 +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH_SIZE (4 << 20) + +/* USB2.0 Host support */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_USB + +/* USB networking support */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX + +/* General networking support */ +#define CONFIG_CMD_DHCP + +/* + * TODO(twarren@nvidia.com) - add tegra-common-usb-gadget.h back + * breaks 64-bit build in ci_udc.c + */ +#include "tegra-common-post.h" + +#define COUNTER_FREQUENCY 38400000 + +#endif /* _P2571_H */ diff --git a/include/configs/pepper.h b/include/configs/pepper.h index 16149f6..0bdcf22 100644 --- a/include/configs/pepper.h +++ b/include/configs/pepper.h @@ -41,7 +41,7 @@ "optargs=\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ + "mmcrootfstype=ext4 rootwait\0" \ "mmcargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${mmcroot} " \ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 7994ecf..235bba5 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -68,15 +68,15 @@ #define CONFIG_CMD_GPT /* USB Composite download gadget - g_dnl */ -#define CONFIG_USBDOWNLOAD_GADGET -#define CONFIG_DFU_FUNCTION +#define CONFIG_USB_GADGET_DOWNLOAD +#define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M #define DFU_DEFAULT_POLL_TIMEOUT 300 /* TIZEN THOR downloader support */ #define CONFIG_CMD_THOR_DOWNLOAD -#define CONFIG_THOR_FUNCTION +#define CONFIG_USB_FUNCTION_THOR /* USB Samsung's IDs */ #define CONFIG_G_DNL_VENDOR_NUM 0x04E8 @@ -275,7 +275,7 @@ #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_OF_LIBFDT diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index e5fd147..f7bef70 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -133,7 +133,7 @@ #define CONFIG_I2C #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED OMAP_I2C_STANDARD +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 #define CONFIG_SYS_I2C_OMAP24XX @@ -249,7 +249,7 @@ #endif /* CONFIG_MUSB_GADGET */ #define CONFIG_USB_GADGET -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_DOWNLOAD /* USB DRACO ID as default */ #define CONFIG_USBD_HS @@ -258,7 +258,7 @@ #define CONFIG_G_DNL_MANUFACTURER "Siemens AG" /* USB Device Firmware Update support */ -#define CONFIG_DFU_FUNCTION +#define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_NAND #define CONFIG_CMD_DFU #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 4c3366a..e8473b8 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -243,10 +243,10 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_USB_GADGET_VBUS_DRAW 2 /* USB Composite download gadget - g_dnl */ -#define CONFIG_USBDOWNLOAD_GADGET -#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USB_GADGET_DOWNLOAD +#define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_DFU_FUNCTION +#define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024) #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index 1b4fd21..1ac3db6 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -15,6 +15,7 @@ #define CONFIG_OF_LIBFDT #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R #define CONFIG_SYS_FLASH_BASE 0x08000000 @@ -61,6 +62,8 @@ #define CONFIG_STM32_HSE_HZ 8000000 +#define CONFIG_SYS_CLK_FREQ 180000000 /* 180 MHz */ + #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ #define CONFIG_CMDLINE_TAG @@ -80,7 +83,7 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTARGS \ - "console=ttystm0,115200 earlyprintk consoleblank=0 ignore_loglevel" + "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" #define CONFIG_BOOTCOMMAND \ "run bootcmd_romfs" diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 9576bc1..5adcc39 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -330,11 +330,6 @@ extern int soft_i2c_gpio_scl; #define CONFIG_MUSB_PIO_ONLY #endif -#if defined CONFIG_USB_EHCI || defined CONFIG_USB_MUSB_SUNXI -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#endif - #ifdef CONFIG_USB_KEYBOARD #define CONFIG_CONSOLE_MUX #define CONFIG_PREBOOT diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 5bc1209..14985f8 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -133,10 +133,10 @@ #define CONFIG_CI_UDC #define CONFIG_USBD_HS #define CONFIG_USB_GADGET -#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 0 -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 #define CONFIG_G_DNL_MANUFACTURER "TBS" diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 483222f..e67ff7b 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -62,11 +62,19 @@ #define CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS #endif +#ifdef CONFIG_ARM64 +#define FDT_HIGH "ffffffffffffffff" +#define INITRD_HIGH "ffffffffffffffff" +#else +#define FDT_HIGH "ffffffff" +#define INITRD_HIGH "ffffffff" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ TEGRA_DEVICE_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ - "fdt_high=ffffffff\0" \ - "initrd_high=ffffffff\0" \ + "fdt_high=" FDT_HIGH "\0" \ + "initrd_high=" INITRD_HIGH "\0" \ BOOTENV \ BOARD_EXTRA_ENV_SETTINGS \ CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS diff --git a/include/configs/tegra-common-usb-gadget.h b/include/configs/tegra-common-usb-gadget.h index 287460c..d70a4e7 100644 --- a/include/configs/tegra-common-usb-gadget.h +++ b/include/configs/tegra-common-usb-gadget.h @@ -18,12 +18,12 @@ #define CONFIG_G_DNL_VENDOR_NUM 0x0955 #define CONFIG_G_DNL_PRODUCT_NUM 0x701A #define CONFIG_G_DNL_MANUFACTURER "NVIDIA" -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_DOWNLOAD /* USB mass storage protocol */ -#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_CMD_USB_MASS_STORAGE /* DFU protocol */ -#define CONFIG_DFU_FUNCTION +#define CONFIG_USB_FUNCTION_DFU #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 * 1024 * 1024) #define CONFIG_CMD_DFU #ifdef CONFIG_MMC diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 7b4c0d7..ffe167e 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -18,8 +18,11 @@ #include <asm/arch/tegra.h> /* get chip and board defs */ +/* Use the Tegra US timer on ARMv7, but the architected timer on ARMv8. */ +#ifndef CONFIG_ARM64 #define CONFIG_SYS_TIMER_RATE 1000000 #define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE +#endif /* * Display CPU and Board information @@ -43,7 +46,9 @@ #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ #endif +#ifndef CONFIG_ARM64 #define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */ +#endif /* * NS16550 Configuration @@ -101,9 +106,11 @@ #define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) +#ifndef CONFIG_ARM64 #ifndef CONFIG_SPL_BUILD #define CONFIG_USE_ARCH_MEMCPY #endif +#endif /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h index 1aee5c8..af7698d 100644 --- a/include/configs/tegra124-common.h +++ b/include/configs/tegra124-common.h @@ -26,7 +26,7 @@ /*----------------------------------------------------------------------- * Physical Memory Map */ -#define CONFIG_SYS_TEXT_BASE 0x8010E000 +#define CONFIG_SYS_TEXT_BASE 0x80110000 /* * Memory layout for where various images get loaded by boot scripts: diff --git a/include/configs/tegra210-common.h b/include/configs/tegra210-common.h new file mode 100644 index 0000000..0348d47 --- /dev/null +++ b/include/configs/tegra210-common.h @@ -0,0 +1,76 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_COMMON_H_ +#define _TEGRA210_COMMON_H_ + +#include "tegra-common.h" + +/* Cortex-A57 uses a cache line size of 64 bytes */ +#define CONFIG_SYS_CACHELINE_SIZE 64 + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_STACKBASE 0x82800000 /* 40MB */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_SYS_TEXT_BASE 0x8010E000 + +/* Generic Interrupt Controller */ +#define CONFIG_GICV2 + +/* + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it above BOOTMAPSZ to eliminate conflicts. + * + * pxefile_addr_r can be pretty much anywhere that doesn't conflict with + * something else. Put it above BOOTMAPSZ to eliminate conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. + */ +#define CONFIG_LOADADDR 0x81000000 +#define MEM_LAYOUT_ENV_SETTINGS \ + "scriptaddr=0x90000000\0" \ + "pxefile_addr_r=0x90100000\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "fdt_addr_r=0x82000000\0" \ + "ramdisk_addr_r=0x82100000\0" + +/* Defines for SPL */ +#define CONFIG_SPL_TEXT_BASE 0x80108000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80090000 +#define CONFIG_SPL_STACK 0x800ffffc + +/* For USB EHCI controller */ +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 + +#endif /* _TEGRA210_COMMON_H_ */ diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 4d2ae28..9697431 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -94,6 +94,6 @@ #endif /* Now bring in the rest of the common code. */ -#include <configs/ti_armv7_common.h> +#include <configs/ti_armv7_omap.h> #endif /* __CONFIG_TI_AM335X_COMMON_H__ */ diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 0aea7d1..6dc5ebd 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -18,8 +18,6 @@ #define __CONFIG_TI_ARMV7_COMMON_H__ /* Common define for many platforms. */ -#define CONFIG_OMAP -#define CONFIG_OMAP_COMMON #define CONFIG_SYS_GENERIC_BOARD /* @@ -76,8 +74,11 @@ #define CONFIG_NR_DRAM_BANKS 1 #endif #define CONFIG_SYS_SDRAM_BASE 0x80000000 + +#ifndef CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ GENERATED_GBL_DATA_SIZE) +#endif /* Timer information. */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ @@ -86,39 +87,20 @@ #define CONFIG_I2C #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP24XX /* MMC/SD IP block */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_OMAP_HSMMC #define CONFIG_CMD_MMC /* McSPI IP block */ #define CONFIG_SPI -#define CONFIG_OMAP3_SPI #define CONFIG_CMD_SPI /* GPIO block */ -#define CONFIG_OMAP_GPIO #define CONFIG_CMD_GPIO /* - * GPMC NAND block. We support 1 device and the physical address to - * access CS0 at is 0x8000000. - */ -#ifdef CONFIG_NAND -#define CONFIG_NAND_OMAP_GPMC -#ifndef CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_NAND_BASE 0x8000000 -#endif -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_CMD_NAND -#endif - -/* * The following are general good-enough settings for U-Boot. We set a * large malloc pool as we generally have a lot of DDR, and we opt for * function over binary size in the main portion of U-Boot as this is @@ -161,7 +143,7 @@ * mtdparts, both for ease of use in U-Boot and for passing information * on to the Linux kernel. */ -#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND) +#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND) || defined(CONFIG_NAND_DAVINCI) #define CONFIG_MTD_DEVICE /* Required for mtdparts */ #define CONFIG_CMD_MTDPARTS #endif @@ -252,15 +234,14 @@ #define CONFIG_SPL_EXT_SUPPORT #endif -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ -#endif +#define CONFIG_SYS_THUMB_BUILD /* General parts of the framework, required. */ #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_BOARD_INIT diff --git a/include/configs/ks2_evm.h b/include/configs/ti_armv7_keystone2.h index e05d56c..2b6a229 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ti_armv7_keystone2.h @@ -14,10 +14,7 @@ /* U-Boot Build Configuration */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_SYS_THUMB_BUILD /* SoC Configuration */ #define CONFIG_ARCH_CPU_INIT @@ -28,11 +25,9 @@ /* Memory Configuration */ #define CONFIG_NR_DRAM_BANKS 2 -#define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000 #define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ #define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */ -#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \ GENERATED_GBL_DATA_SIZE) @@ -49,15 +44,10 @@ #define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \ CONFIG_SYS_SPL_MALLOC_SIZE + \ CONFIG_SPL_STACK_SIZE - 4) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO -#define CONFIG_SPL_FRAMEWORK /* UART Configuration */ #define CONFIG_SYS_NS16550 @@ -68,13 +58,10 @@ #define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE #define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6) #define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 /* SPI Configuration */ -#define CONFIG_SPI #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_DAVINCI_SPI -#define CONFIG_CMD_SPI #define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_CLK1_6) #define CONFIG_SF_DEFAULT_SPEED 30000000 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED @@ -148,7 +135,6 @@ #define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE /* I2C Configuration */ -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_DAVINCI #define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 #define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ @@ -185,7 +171,6 @@ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x100000 #define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE #define CONFIG_RBTREE #define CONFIG_LZO #define MTDIDS_DEFAULT "nand0=davinci_nand.0" @@ -195,10 +180,9 @@ /* USB Configuration */ #define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_XHCI_KEYSTONE #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION #define CONFIG_FS_FAT #define CONFIG_SYS_CACHELINE_SIZE 64 @@ -208,65 +192,46 @@ #define CONFIG_USB_PHY_CFG_BASE KS2_USB_PHY_CFG_BASE /* U-Boot command configuration */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_NAND #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_CMD_SF #define CONFIG_CMD_EEPROM #define CONFIG_CMD_USB -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC /* U-Boot general configuration */ -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_MISC_INIT_R -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE 2048 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP #define CONFIG_CRC32_VERIFY #define CONFIG_MX_CYCLIC -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE #define CONFIG_TIMESTAMP /* EDMA3 */ #define CONFIG_TI_EDMA3 -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTFILE "uImage" #define CONFIG_EXTRA_ENV_SETTINGS \ + DEFAULT_LINUX_BOOT_ENV \ CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ "boot=ubi\0" \ "tftp_root=/\0" \ "nfs_root=/export\0" \ "mem_lpae=1\0" \ "mem_reserve=512M\0" \ - "addr_fdt=0x87000000\0" \ - "addr_kern=0x88000000\0" \ - "addr_uboot=0x87000000\0" \ - "addr_fs=0x82000000\0" \ "addr_ubi=0x82000000\0" \ "addr_secdb_key=0xc000000\0" \ - "fdt_high=0xffffffff\0" \ - "name_kern=uImage-keystone-evm.bin\0" \ + "name_kern=zImage\0" \ "run_mon=mon_install ${addr_mon}\0" \ - "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \ + "run_kern=bootz ${loadaddr} - ${fdtaddr}\0" \ "init_net=run args_all args_net\0" \ "init_ubi=run args_all args_ubi; " \ "ubi part ubifs; ubifsmount ubi:boot;" \ "ubifsload ${addr_secdb_key} securedb.key.bin;\0" \ - "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ - "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \ - "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ - "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \ + "get_fdt_net=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0" \ + "get_fdt_ubi=ubifsload ${fdtaddr} ${name_fdt}\0" \ + "get_kern_net=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0" \ + "get_kern_ubi=ubifsload ${loadaddr} ${name_kern}\0" \ "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \ "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \ @@ -279,10 +244,10 @@ "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ "${nfs_options} ip=dhcp\0" \ "nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \ - "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ - "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ + "get_fdt_ramfs=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0" \ + "get_kern_ramfs=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0" \ "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ - "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \ + "get_fs_ramfs=dhcp ${rdaddr} ${tftp_root}/${name_fs}\0" \ "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \ "burn_ubi=nand erase.part ubifs; " \ "nand write ${addr_ubi} ubifs ${filesize}\0" \ @@ -301,15 +266,26 @@ #define CONFIG_BOOTARGS \ /* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP -#define CONFIG_SYS_BARGSIZE 1024 -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000) -#define CONFIG_LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100) -#define CONFIG_SUPPORT_RAW_INITRD +/* Now for the remaining common defines */ +#include <configs/ti_armv7_common.h> + +/* We wont be loading up OS from SPL for now.. */ +#undef CONFIG_SPL_OS_BOOT + +/* We do not have MMC support.. yet.. */ +#undef CONFIG_SPL_LIBDISK_SUPPORT +#undef CONFIG_SPL_MMC_SUPPORT +#undef CONFIG_SPL_FAT_SUPPORT +#undef CONFIG_SPL_EXT_SUPPORT +#undef CONFIG_MMC +#undef CONFIG_GENERIC_MMC +#undef CONFIG_CMD_MMC + +/* And no support for GPIO, yet.. */ +#undef CONFIG_SPL_GPIO_SUPPORT +#undef CONFIG_CMD_GPIO /* we may include files below only after all above definitions */ #include <asm/arch/hardware.h> diff --git a/include/configs/ti_armv7_omap.h b/include/configs/ti_armv7_omap.h new file mode 100644 index 0000000..7548170 --- /dev/null +++ b/include/configs/ti_armv7_omap.h @@ -0,0 +1,49 @@ +/* + * ti_armv7_omap.h + * + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + * + * The various ARMv7 SoCs from TI all share a number of IP blocks when + * implementing a given feature. This is meant to isolate the features + * that are based on OMAP architecture. + */ +#ifndef __CONFIG_TI_ARMV7_OMAP_H__ +#define __CONFIG_TI_ARMV7_OMAP_H__ + +/* Common defines for all OMAP architecture based SoCs */ +#define CONFIG_OMAP +#define CONFIG_OMAP_COMMON + +/* I2C IP block */ +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP24XX + +/* MMC/SD IP block */ +#define CONFIG_OMAP_HSMMC + +/* SPI IP Block */ +#define CONFIG_OMAP3_SPI + +/* GPIO block */ +#define CONFIG_OMAP_GPIO + +/* + * GPMC NAND block. We support 1 device and the physical address to + * access CS0 at is 0x8000000. + */ +#ifdef CONFIG_NAND +#define CONFIG_NAND_OMAP_GPMC +#ifndef CONFIG_SYS_NAND_BASE +#define CONFIG_SYS_NAND_BASE 0x8000000 +#endif +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_CMD_NAND +#endif + +/* Now for the remaining common defines */ +#include <configs/ti_armv7_common.h> + +#endif /* __CONFIG_TI_ARMV7_OMAP_H__ */ diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 429b109..be231a5 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -84,6 +84,6 @@ #endif /* Now bring in the rest of the common code. */ -#include <configs/ti_armv7_common.h> +#include <configs/ti_armv7_omap.h> #endif /* __CONFIG_TI_OMAP3_COMMON_H__ */ diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index e966134..b299aed 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -52,7 +52,7 @@ #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS #endif -#include <configs/ti_armv7_common.h> +#include <configs/ti_armv7_omap.h> /* * Hardware drivers @@ -171,6 +171,7 @@ /* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */ #undef CONFIG_SYS_I2C #undef CONFIG_SYS_I2C_OMAP24XX +#undef CONFIG_SPL_I2C_SUPPORT #endif #endif /* __CONFIG_TI_OMAP4_COMMON_H */ diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index f3e5a75..fe04692 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -40,14 +40,12 @@ #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS #endif -#ifndef CONFIG_SPL_BUILD #define CONFIG_PALMAS_POWER -#endif #include <asm/arch/cpu.h> #include <asm/arch/omap.h> -#include <configs/ti_armv7_common.h> +#include <configs/ti_armv7_omap.h> /* * Hardware drivers @@ -135,7 +133,7 @@ "if test ${dofastboot} -eq 1; then " \ "echo Boot fastboot requested, resetting dofastboot ...;" \ "setenv dofastboot 0; saveenv;" \ - "echo Booting into fastboot ...; fastboot;" \ + "echo Booting into fastboot ...; fastboot 0;" \ "fi;" \ "run findfdt; " \ "run mmcboot;" \ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 5c7a342..908be26 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -9,15 +9,18 @@ #ifndef __CONFIG_UNIPHIER_COMMON_H__ #define __CONFIG_UNIPHIER_COMMON_H__ -#if defined(CONFIG_MACH_PH1_PRO4) +#if defined(CONFIG_MACH_PH1_SLD3) #define CONFIG_DDR_NUM_CH0 2 -#define CONFIG_DDR_NUM_CH1 2 +#define CONFIG_DDR_NUM_CH1 1 +#define CONFIG_DDR_NUM_CH2 1 /* Physical start address of SDRAM */ #define CONFIG_SDRAM0_BASE 0x80000000 #define CONFIG_SDRAM0_SIZE 0x20000000 -#define CONFIG_SDRAM1_BASE 0xa0000000 +#define CONFIG_SDRAM1_BASE 0xc0000000 #define CONFIG_SDRAM1_SIZE 0x20000000 +#define CONFIG_SDRAM2_BASE 0xc0000000 +#define CONFIG_SDRAM2_SIZE 0x10000000 #endif #if defined(CONFIG_MACH_PH1_LD4) @@ -31,6 +34,17 @@ #define CONFIG_SDRAM1_SIZE 0x10000000 #endif +#if defined(CONFIG_MACH_PH1_PRO4) +#define CONFIG_DDR_NUM_CH0 2 +#define CONFIG_DDR_NUM_CH1 2 + +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x20000000 +#define CONFIG_SDRAM1_BASE 0xa0000000 +#define CONFIG_SDRAM1_SIZE 0x20000000 +#endif + #if defined(CONFIG_MACH_PH1_SLD8) #define CONFIG_DDR_NUM_CH0 1 #define CONFIG_DDR_NUM_CH1 1 @@ -177,8 +191,13 @@ #define CONFIG_NAND_DENALI_ECC_SIZE 1024 +#ifdef CONFIG_MACH_PH1_SLD3 +#define CONFIG_SYS_NAND_REGS_BASE 0xf8100000 +#define CONFIG_SYS_NAND_DATA_BASE 0xf8000000 +#else #define CONFIG_SYS_NAND_REGS_BASE 0x68100000 #define CONFIG_SYS_NAND_DATA_BASE 0x68000000 +#endif #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10) @@ -209,7 +228,6 @@ #define CONFIG_LOADADDR 0x84000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_BOOTFILE "fit.itb" #define CONFIG_CMDLINE_EDITING /* add command line history */ @@ -222,25 +240,61 @@ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ "tftpboot; bootm;" -#define CONFIG_BOOTARGS " user_debug=0x1f init=/sbin/init" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "image_offset=0x00080000\0" \ - "image_size=0x00f00000\0" \ - "verify=n\0" \ - "nandupdate=nand erase 0 0x100000 &&" \ - "tftpboot u-boot-spl.bin &&" \ - "nand write $loadaddr 0 0x10000 &&" \ - "tftpboot u-boot-dtb.img &&" \ - "nand write $loadaddr 0x10000 0xf0000\0" \ - "norboot=run add_default_bootargs &&" \ - "bootm $image_offset\0" \ - "nandboot=run add_default_bootargs &&" \ - "nand read $loadaddr $image_offset $image_size &&" \ - "bootm\0" \ - "add_default_bootargs=setenv bootargs $bootargs" \ - " console=ttyS0,$baudrate\0" \ +#define CONFIG_BOOTARGS " earlyprintk loglevel=8" + +#ifdef CONFIG_FIT +#define CONFIG_BOOTFILE "fitImage" +#define LINUXBOOT_ENV_SETTINGS \ + "fit_addr=0x00100000\0" \ + "fit_addr_r=0x84100000\0" \ + "fit_size=0x00f00000\0" \ + "norboot=run add_default_bootargs &&" \ + "bootm $fit_addr\0" \ + "nandboot=run add_default_bootargs &&" \ + "nand read $fit_addr_r $fit_addr $fit_size &&" \ + "bootm $fit_addr_r\0" \ + "tftpboot=run add_default_bootargs &&" \ + "tftpboot $fit_addr_r $bootfile &&" \ + "bootm $fit_addr_r\0" +#else +#define CONFIG_BOOTFILE "uImage" +#define LINUXBOOT_ENV_SETTINGS \ + "fdt_addr=0x00100000\0" \ + "fdt_addr_r=0x84100000\0" \ + "fdt_size=0x00008000\0" \ + "fdt_file=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ + "kernel_addr=0x00200000\0" \ + "kernel_addr_r=0x84200000\0" \ + "kernel_size=0x00800000\0" \ + "ramdisk_addr=0x00a00000\0" \ + "ramdisk_addr_r=0x84a00000\0" \ + "ramdisk_size=0x00600000\0" \ + "ramdisk_file=rootfs.cpio.uboot\0" \ + "norboot=run add_default_bootargs &&" \ + "bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \ + "nandboot=run add_default_bootargs &&" \ + "nand read $kernel_addr_r $kernel_addr $kernel_size &&" \ + "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \ + "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \ + "bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ + "tftpboot=run add_default_bootargs &&" \ + "tftpboot $kernel_addr_r $bootfile &&" \ + "tftpboot $ramdisk_addr_r $ramdisk_file &&" \ + "tftpboot $fdt_addr_r $fdt_file &&" \ + "bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "verify=n\0" \ + "nandupdate=nand erase 0 0x00100000 &&" \ + "tftpboot u-boot-spl.bin &&" \ + "nand write $loadaddr 0 0x00010000 &&" \ + "tftpboot u-boot-dtb.img &&" \ + "nand write $loadaddr 0x00010000 0x000f0000\0" \ + "add_default_bootargs=setenv bootargs $bootargs" \ + " console=ttyS0,$baudrate\0" \ + LINUXBOOT_ENV_SETTINGS /* Open Firmware flat tree */ #define CONFIG_OF_LIBFDT @@ -259,7 +313,8 @@ #define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE) #endif -#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) +#if defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_LD4) || \ + defined(CONFIG_MACH_PH1_SLD8) #define CONFIG_SPL_TEXT_BASE 0x00040000 #endif #if defined(CONFIG_MACH_PH1_PRO4) diff --git a/include/configs/warp.h b/include/configs/warp.h index d5c3215..fa102bb 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -80,8 +80,8 @@ #define CONFIG_USB_GADGET #define CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USB_GADGET_MASS_STORAGE -#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_FUNCTION_MASS_STORAGE +#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_VENDOR_NUM 0x0525 @@ -89,7 +89,7 @@ #define CONFIG_G_DNL_MANUFACTURER "FSL" #define CONFIG_CMD_DFU -#define CONFIG_DFU_FUNCTION +#define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index ad82ed6..68853b6 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -40,7 +40,6 @@ #define CONFIG_IDENT_STRING " Xilinx ZynqMP" -#define CONFIG_SYS_TEXT_BASE 0x8000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) /* Flat Device Tree Definitions */ @@ -53,16 +52,20 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x400000) /* Serial setup */ -#define CONFIG_ZYNQ_SERIAL_UART0 -#define CONFIG_ZYNQ_SERIAL +#if defined(CONFIG_ZYNQMP_DCC) +# define CONFIG_ARM_DCC +# define CONFIG_CPU_ARMV8 +#else +# if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1) +# define CONFIG_ZYNQ_SERIAL +# endif +#endif #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE \ { 4800, 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_ZYNQ_SDHCI0 - /* Command line configuration */ #define CONFIG_CMD_ENV #define CONFIG_CMD_EXT2 @@ -73,6 +76,16 @@ #define CONFIG_CMD_ELF #define CONFIG_MP +#define CONFIG_CMD_MII + +/* BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_MAY_FAIL +#define CONFIG_BOOTP_SERVERIP + /* SPI */ #ifdef CONFIG_ZYNQ_SPI # define CONFIG_SPI_FLASH_SST @@ -127,8 +140,16 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_MAXARGS 64 -#define CONFIG_ZYNQ_I2C0 -#define CONFIG_SYS_I2C_ZYNQ +/* Ethernet driver */ +#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) || \ + defined(CONFIG_ZYNQ_GEM2) || defined(CONFIG_ZYNQ_GEM3) +# define CONFIG_NET_MULTI +# define CONFIG_ZYNQ_GEM +# define CONFIG_MII +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +# define CONFIG_PHYLIB +# define CONFIG_PHY_MARVELL +#endif /* I2C */ #if defined(CONFIG_SYS_I2C_ZYNQ) @@ -138,8 +159,6 @@ # define CONFIG_SYS_I2C_ZYNQ_SLAVE 0 #endif -#define CONFIG_ZYNQMP_EEPROM - /* EEPROM */ #ifdef CONFIG_ZYNQMP_EEPROM # define CONFIG_CMD_EEPROM @@ -150,6 +169,17 @@ # define CONFIG_SYS_EEPROM_SIZE (64 * 1024) #endif +#ifdef CONFIG_AHCI +#define CONFIG_LIBATA +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#define CONFIG_CMD_SCSI +#endif + #define CONFIG_FIT #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h new file mode 100644 index 0000000..c872f7c --- /dev/null +++ b/include/configs/xilinx_zynqmp_ep.h @@ -0,0 +1,27 @@ +/* + * Configuration for Xilinx ZynqMP emulation + * platforms. See zynqmp-common.h for ZynqMP + * common configs + * + * (C) Copyright 2014 - 2015 Xilinx, Inc. + * Michal Simek <michal.simek@xilinx.com> + * Siva Durga Prasad Paladugu <sivadur@xilinx.com> + * + * Based on Configuration for Versatile Express + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQMP_EP_H +#define __CONFIG_ZYNQMP_EP_H + +#define CONFIG_ZYNQ_SERIAL_UART0 +#define CONFIG_ZYNQ_SDHCI0 +#define CONFIG_ZYNQ_I2C0 +#define CONFIG_SYS_I2C_ZYNQ +#define CONFIG_ZYNQ_EEPROM +#define CONFIG_AHCI + +#include <configs/xilinx_zynqmp.h> + +#endif /* __CONFIG_ZYNQMP_EP_H */ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 5526214..98bebd0 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -110,10 +110,10 @@ # define CONFIG_CI_UDC /* ChipIdea CI13xxx UDC */ # define CONFIG_USB_GADGET # define CONFIG_USB_GADGET_DUALSPEED -# define CONFIG_USBDOWNLOAD_GADGET +# define CONFIG_USB_GADGET_DOWNLOAD # define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x600000 # define DFU_DEFAULT_POLL_TIMEOUT 300 -# define CONFIG_DFU_FUNCTION +# define CONFIG_USB_FUNCTION_DFU # define CONFIG_DFU_RAM # define CONFIG_USB_GADGET_VBUS_DRAW 2 # define CONFIG_G_DNL_VENDOR_NUM 0x03FD @@ -123,7 +123,7 @@ # define CONFIG_USB_CABLE_CHECK # define CONFIG_CMD_DFU # define CONFIG_CMD_THOR_DOWNLOAD -# define CONFIG_THOR_FUNCTION +# define CONFIG_USB_FUNCTION_THOR # define DFU_ALT_INFO_RAM \ "dfu_ram_info=" \ "set dfu_alt_info " \ diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h index 16b9047..7a1b872 100644 --- a/include/configs/zynq_zc770.h +++ b/include/configs/zynq_zc770.h @@ -21,6 +21,9 @@ # define CONFIG_ZYNQ_SDHCI0 # define CONFIG_ZYNQ_SPI +#elif defined(CONFIG_ZC770_XM011) +# define CONFIG_ZYNQ_SERIAL_UART1 + #elif defined(CONFIG_ZC770_XM012) # define CONFIG_ZYNQ_SERIAL_UART1 # undef CONFIG_SYS_NO_FLASH diff --git a/include/debug_uart.h b/include/debug_uart.h index f56797b..a75e377 100644 --- a/include/debug_uart.h +++ b/include/debug_uart.h @@ -10,8 +10,6 @@ #ifndef _DEBUG_UART_H #define _DEBUG_UART_H -#include <linux/linkage.h> - /* * The debug UART is intended for use very early in U-Boot to debug problems * when an ICE or other debug mechanism is not available. @@ -64,46 +62,46 @@ void debug_uart_init(void); * * @ch: Character to output */ -asmlinkage void printch(int ch); +void printch(int ch); /** * printascii() - Output an ASCII string to the debug UART * * @str: String to output */ -asmlinkage void printascii(const char *str); +void printascii(const char *str); /** * printhex2() - Output a 2-digit hex value * * @value: Value to output */ -asmlinkage void printhex2(uint value); +void printhex2(uint value); /** * printhex4() - Output a 4-digit hex value * * @value: Value to output */ -asmlinkage void printhex4(uint value); +void printhex4(uint value); /** * printhex8() - Output a 8-digit hex value * * @value: Value to output */ -asmlinkage void printhex8(uint value); +void printhex8(uint value); /* * Now define some functions - this should be inserted into the serial driver */ #define DEBUG_UART_FUNCS \ - asmlinkage void printch(int ch) \ + void printch(int ch) \ { \ _debug_uart_putc(ch); \ } \ \ - asmlinkage void printascii(const char *str) \ + void printascii(const char *str) \ { \ while (*str) \ _debug_uart_putc(*str++); \ @@ -121,17 +119,17 @@ asmlinkage void printhex8(uint value); printhex1(value >> (4 * digits)); \ } \ \ - asmlinkage void printhex2(uint value) \ + void printhex2(uint value) \ { \ printhex(value, 2); \ } \ \ - asmlinkage void printhex4(uint value) \ + void printhex4(uint value) \ { \ printhex(value, 4); \ } \ \ - asmlinkage void printhex8(uint value) \ + void printhex8(uint value) \ { \ printhex(value, 8); \ } diff --git a/include/dm/device-internal.h b/include/dm/device-internal.h index 687462b..402304f 100644 --- a/include/dm/device-internal.h +++ b/include/dm/device-internal.h @@ -107,6 +107,32 @@ int device_unbind(struct udevice *dev); static inline int device_unbind(struct udevice *dev) { return 0; } #endif +/** + * device_remove_children() - Stop all device's children + * @dev: The device whose children are to be removed + * @return 0 on success, -ve on error + */ +#ifdef CONFIG_DM_DEVICE_REMOVE +int device_remove_children(struct udevice *dev); +#else +static inline int device_remove_children(struct udevice *dev) { return 0; } +#endif + +/** + * device_unbind_children() - Unbind all device's children from the device + * + * On error, the function continues to unbind all children, and reports the + * first error. + * + * @dev: The device that is to be stripped of its children + * @return 0 on success, -ve on error + */ +#ifdef CONFIG_DM_DEVICE_REMOVE +int device_unbind_children(struct udevice *dev); +#else +static inline int device_unbind_children(struct udevice *dev) { return 0; } +#endif + #ifdef CONFIG_DM_DEVICE_REMOVE void device_free(struct udevice *dev); #else diff --git a/include/dm/device.h b/include/dm/device.h index 18296bb..9fa0048 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -386,10 +386,24 @@ int device_find_child_by_of_offset(struct udevice *parent, int of_offset, * @devp: Returns pointer to device if found, otherwise this is set to NULL * @return 0 if OK, -ve on error */ -int device_get_child_by_of_offset(struct udevice *parent, int seq, +int device_get_child_by_of_offset(struct udevice *parent, int of_offset, struct udevice **devp); /** + * device_get_global_by_of_offset() - Get a device based on FDT offset + * + * Locates a device by its device tree offset, searching globally throughout + * the all driver model devices. + * + * The device is probed to activate it ready for use. + * + * @of_offset: Device tree offset to find + * @devp: Returns pointer to device if found, otherwise this is set to NULL + * @return 0 if OK, -ve on error + */ +int device_get_global_by_of_offset(int of_offset, struct udevice **devp); + +/** * device_find_first_child() - Find the first child of a device * * @parent: Parent device to search diff --git a/include/dm/platdata.h b/include/dm/platdata.h index fbc8a6b..6f4f001 100644 --- a/include/dm/platdata.h +++ b/include/dm/platdata.h @@ -16,6 +16,10 @@ /** * struct driver_info - Information required to instantiate a device * + * NOTE: Avoid using this except in extreme circumstances, where device tree + * is not feasible (e.g. serial driver in SPL where <8KB of SRAM is + * available). U-Boot's driver model uses device tree for configuration. + * * @name: Driver name * @platdata: Driver-specific platform data */ @@ -24,6 +28,11 @@ struct driver_info { const void *platdata; }; +/** + * NOTE: Avoid using these except in extreme circumstances, where device tree + * is not feasible (e.g. serial driver in SPL where <8KB of SRAM is + * available). U-Boot's driver model uses device tree for configuration. + */ #define U_BOOT_DEVICE(__name) \ ll_entry_declare(struct driver_info, __name, driver_info) diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index c7310d7..bc057d7 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -25,27 +25,33 @@ enum uclass_id { UCLASS_SIMPLE_BUS, /* bus with child devices */ /* U-Boot uclasses start here - in alphabetical order */ + UCLASS_CLK, /* Clock source, e.g. used by peripherals */ UCLASS_CPU, /* CPU, typically part of an SoC */ UCLASS_CROS_EC, /* Chrome OS EC */ UCLASS_DISPLAY_PORT, /* Display port video */ + UCLASS_RAM, /* RAM controller */ UCLASS_ETH, /* Ethernet device */ UCLASS_GPIO, /* Bank of general-purpose I/O pins */ UCLASS_I2C, /* I2C bus */ UCLASS_I2C_EEPROM, /* I2C EEPROM device */ UCLASS_I2C_GENERIC, /* Generic I2C device */ + UCLASS_LED, /* Light-emitting diode (LED) */ UCLASS_LPC, /* x86 'low pin count' interface */ UCLASS_MASS_STORAGE, /* Mass storage device */ + UCLASS_MMC, /* SD / MMC card or chip */ UCLASS_MOD_EXP, /* RSA Mod Exp device */ UCLASS_PCH, /* x86 platform controller hub */ UCLASS_PCI, /* PCI bus */ UCLASS_PCI_GENERIC, /* Generic PCI bus device */ UCLASS_PMIC, /* PMIC I/O device */ UCLASS_REGULATOR, /* Regulator device */ + UCLASS_RESET, /* Reset device */ UCLASS_RTC, /* Real time clock device */ UCLASS_SERIAL, /* Serial UART */ UCLASS_SPI, /* SPI bus */ UCLASS_SPI_FLASH, /* SPI flash */ UCLASS_SPI_GENERIC, /* Generic SPI flash target */ + UCLASS_SYSCON, /* System configuration device */ UCLASS_THERMAL, /* Thermal sensor */ UCLASS_USB, /* USB bus */ UCLASS_USB_DEV_GENERIC, /* USB generic device */ diff --git a/include/dm/util.h b/include/dm/util.h index 0cec17b..7dbed67 100644 --- a/include/dm/util.h +++ b/include/dm/util.h @@ -33,4 +33,10 @@ struct list_head; */ int list_count_items(struct list_head *head); +/* Dump out a tree of all devices */ +void dm_dump_all(void); + +/* Dump out a list of uclasses and their devices */ +void dm_dump_uclass(void); + #endif diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h new file mode 100644 index 0000000..d134741 --- /dev/null +++ b/include/dt-bindings/clock/tegra210-car.h @@ -0,0 +1,342 @@ +/* + * This header provides Tegra210-specific constants for binding + * nvidia,tegra210-car. + */ + +#ifndef _DT_BINDINGS_CLOCK_TEGRA210_CAR_H +#define _DT_BINDINGS_CLOCK_TEGRA210_CAR_H + +/* 0 */ +/* 1 */ +/* 2 */ +#define TEGRA210_CLK_ISPB 3 +#define TEGRA210_CLK_RTC 4 +#define TEGRA210_CLK_TIMER 5 +#define TEGRA210_CLK_UARTA 6 +/* 7 (register bit affects uartb and vfir) */ +/* 8 */ +#define TEGRA210_CLK_SDMMC2 9 +/* 10 (register bit affects spdif_in and spdif_out) */ +#define TEGRA210_CLK_I2S1 11 +#define TEGRA210_CLK_I2C1 12 +/* 13 */ +#define TEGRA210_CLK_SDMMC1 14 +#define TEGRA210_CLK_SDMMC4 15 +/* 16 */ +#define TEGRA210_CLK_PWM 17 +#define TEGRA210_CLK_I2S2 18 +/* 20 (register bit affects vi and vi_sensor) */ +/* 21 */ +#define TEGRA210_CLK_USBD 22 +#define TEGRA210_CLK_ISP 23 +/* 26 */ +/* 25 */ +#define TEGRA210_CLK_DISP2 26 +#define TEGRA210_CLK_DISP1 27 +#define TEGRA210_CLK_HOST1X 28 +#define TEGRA210_CLK_VCP 29 +#define TEGRA210_CLK_I2S0 30 +/* 31 */ + +#define TEGRA210_CLK_MC 32 +/* 33 */ +#define TEGRA210_CLK_APBDMA 34 +/* 35 */ +#define TEGRA210_CLK_KBC 36 +/* 37 */ +/* 38 */ +/* 39 (register bit affects fuse and fuse_burn) */ +#define TEGRA210_CLK_KFUSE 40 +#define TEGRA210_CLK_SBC1 41 +#define TEGRA210_CLK_NOR 42 +/* 43 */ +#define TEGRA210_CLK_SBC2 44 +/* 45 */ +#define TEGRA210_CLK_SBC3 46 +#define TEGRA210_CLK_I2C5 47 +#define TEGRA210_CLK_DSIA 48 +/* 49 */ +#define TEGRA210_CLK_MIPI 50 +#define TEGRA210_CLK_HDMI 51 +#define TEGRA210_CLK_CSI 52 +/* 53 */ +#define TEGRA210_CLK_I2C2 54 +#define TEGRA210_CLK_UARTC 55 +#define TEGRA210_CLK_MIPI_CAL 56 +#define TEGRA210_CLK_EMC 57 +#define TEGRA210_CLK_USB2 58 +#define TEGRA210_CLK_USB3 59 +/* 60 */ +#define TEGRA210_CLK_VDE 61 +#define TEGRA210_CLK_BSEA 62 +#define TEGRA210_CLK_BSEV 63 + +/* 64 */ +#define TEGRA210_CLK_UARTD 65 +/* 66 */ +#define TEGRA210_CLK_I2C3 67 +#define TEGRA210_CLK_SBC4 68 +#define TEGRA210_CLK_SDMMC3 69 +#define TEGRA210_CLK_PCIE 70 +#define TEGRA210_CLK_OWR 71 +#define TEGRA210_CLK_AFI 72 +#define TEGRA210_CLK_CSITE 73 +/* 74 */ +/* 75 */ +#define TEGRA210_CLK_LA 76 +#define TEGRA210_CLK_TRACE 77 +#define TEGRA210_CLK_SOC_THERM 78 +#define TEGRA210_CLK_DTV 79 +/* 80 */ +#define TEGRA210_CLK_I2CSLOW 81 +#define TEGRA210_CLK_DSIB 82 +#define TEGRA210_CLK_TSEC 83 +/* 84 */ +/* 85 */ +/* 86 */ +/* 87 */ +/* 88 */ +#define TEGRA210_CLK_XUSB_HOST 89 +/* 90 */ +#define TEGRA210_CLK_MSENC 91 +#define TEGRA210_CLK_CSUS 92 +/* 93 */ +/* 94 */ +/* 95 (bit affects xusb_dev and xusb_dev_src) */ + +/* 96 */ +/* 97 */ +/* 98 */ +#define TEGRA210_CLK_MSELECT 99 +#define TEGRA210_CLK_TSENSOR 100 +#define TEGRA210_CLK_I2S3 101 +#define TEGRA210_CLK_I2S4 102 +#define TEGRA210_CLK_I2C4 103 +#define TEGRA210_CLK_SBC5 104 +#define TEGRA210_CLK_SBC6 105 +#define TEGRA210_CLK_D_AUDIO 106 +#define TEGRA210_CLK_APBIF 107 +#define TEGRA210_CLK_DAM0 108 +#define TEGRA210_CLK_DAM1 109 +#define TEGRA210_CLK_DAM2 110 +#define TEGRA210_CLK_HDA2CODEC_2X 111 +/* 112 */ +#define TEGRA210_CLK_AUDIO0_2X 113 +#define TEGRA210_CLK_AUDIO1_2X 114 +#define TEGRA210_CLK_AUDIO2_2X 115 +#define TEGRA210_CLK_AUDIO3_2X 116 +#define TEGRA210_CLK_AUDIO4_2X 117 +#define TEGRA210_CLK_SPDIF_2X 118 +#define TEGRA210_CLK_ACTMON 119 +#define TEGRA210_CLK_EXTERN1 120 +#define TEGRA210_CLK_EXTERN2 121 +#define TEGRA210_CLK_EXTERN3 122 +#define TEGRA210_CLK_SATA_OOB 123 +#define TEGRA210_CLK_SATA 124 +#define TEGRA210_CLK_HDA 125 +/* 126 */ +#define TEGRA210_CLK_SE 127 + +#define TEGRA210_CLK_HDA2HDMI 128 +#define TEGRA210_CLK_SATA_COLD 129 +/* 130 */ +/* 131 */ +/* 132 */ +/* 133 */ +/* 134 */ +/* 135 */ +/* 136 */ +/* 137 */ +/* 138 */ +/* 139 */ +/* 140 */ +/* 141 */ +/* 142 */ +/* 143 (bit affects xusb_falcon_src, xusb_fs_src, */ +/* xusb_host_src and xusb_ss_src) */ +#define TEGRA210_CLK_CILAB 144 +#define TEGRA210_CLK_CILCD 145 +#define TEGRA210_CLK_CILE 146 +#define TEGRA210_CLK_DSIALP 147 +#define TEGRA210_CLK_DSIBLP 148 +#define TEGRA210_CLK_ENTROPY 149 +#define TEGRA210_CLK_DDS 150 +/* 151 */ +#define TEGRA210_CLK_DP2 152 +#define TEGRA210_CLK_AMX 153 +#define TEGRA210_CLK_ADX 154 +/* 155 (bit affects dfll_ref and dfll_soc) */ +#define TEGRA210_CLK_XUSB_SS 156 +/* 157 */ +/* 158 */ +/* 159 */ + +/* 160 */ +/* 161 */ +/* 162 */ +/* 163 */ +/* 164 */ +/* 165 */ +#define TEGRA210_CLK_I2C6 166 +/* 167 */ +/* 168 */ +/* 169 */ +/* 170 */ +#define TEGRA210_CLK_VIM2_CLK 171 +/* 172 */ +/* 173 */ +/* 174 */ +/* 175 */ +#define TEGRA210_CLK_HDMI_AUDIO 176 +#define TEGRA210_CLK_CLK72MHZ 177 +#define TEGRA210_CLK_VIC03 178 +/* 179 */ +#define TEGRA210_CLK_ADX1 180 +#define TEGRA210_CLK_DPAUX 181 +#define TEGRA210_CLK_SOR0 182 +/* 183 */ +#define TEGRA210_CLK_GPU 184 +#define TEGRA210_CLK_AMX1 185 +/* 186 */ +/* 187 */ +/* 188 */ +/* 189 */ +/* 190 */ +/* 191 */ +#define TEGRA210_CLK_UARTB 192 +#define TEGRA210_CLK_VFIR 193 +#define TEGRA210_CLK_SPDIF_IN 194 +#define TEGRA210_CLK_SPDIF_OUT 195 +#define TEGRA210_CLK_VI 196 +#define TEGRA210_CLK_VI_SENSOR 197 +#define TEGRA210_CLK_FUSE 198 +#define TEGRA210_CLK_FUSE_BURN 199 +#define TEGRA210_CLK_CLK_32K 200 +#define TEGRA210_CLK_CLK_M 201 +#define TEGRA210_CLK_CLK_M_DIV2 202 +#define TEGRA210_CLK_CLK_M_DIV4 203 +#define TEGRA210_CLK_PLL_REF 204 +#define TEGRA210_CLK_PLL_C 205 +#define TEGRA210_CLK_PLL_C_OUT1 206 +#define TEGRA210_CLK_PLL_C2 207 +#define TEGRA210_CLK_PLL_C3 208 +#define TEGRA210_CLK_PLL_M 209 +#define TEGRA210_CLK_PLL_M_OUT1 210 +#define TEGRA210_CLK_PLL_P 211 +#define TEGRA210_CLK_PLL_P_OUT1 212 +#define TEGRA210_CLK_PLL_P_OUT2 213 +#define TEGRA210_CLK_PLL_P_OUT3 214 +#define TEGRA210_CLK_PLL_P_OUT4 215 +#define TEGRA210_CLK_PLL_A 216 +#define TEGRA210_CLK_PLL_A_OUT0 217 +#define TEGRA210_CLK_PLL_D 218 +#define TEGRA210_CLK_PLL_D_OUT0 219 +#define TEGRA210_CLK_PLL_D2 220 +#define TEGRA210_CLK_PLL_D2_OUT0 221 +#define TEGRA210_CLK_PLL_U 222 +#define TEGRA210_CLK_PLL_U_480M 223 + +#define TEGRA210_CLK_PLL_U_60M 224 +#define TEGRA210_CLK_PLL_U_48M 225 +#define TEGRA210_CLK_PLL_U_12M 226 +/* 227 */ +/* 228 */ +#define TEGRA210_CLK_PLL_RE_VCO 229 +#define TEGRA210_CLK_PLL_RE_OUT 230 +#define TEGRA210_CLK_PLL_E 231 +#define TEGRA210_CLK_SPDIF_IN_SYNC 232 +#define TEGRA210_CLK_I2S0_SYNC 233 +#define TEGRA210_CLK_I2S1_SYNC 234 +#define TEGRA210_CLK_I2S2_SYNC 235 +#define TEGRA210_CLK_I2S3_SYNC 236 +#define TEGRA210_CLK_I2S4_SYNC 237 +#define TEGRA210_CLK_VIMCLK_SYNC 238 +#define TEGRA210_CLK_AUDIO0 239 +#define TEGRA210_CLK_AUDIO1 240 +#define TEGRA210_CLK_AUDIO2 241 +#define TEGRA210_CLK_AUDIO3 242 +#define TEGRA210_CLK_AUDIO4 243 +#define TEGRA210_CLK_SPDIF 244 +#define TEGRA210_CLK_CLK_OUT_1 245 +#define TEGRA210_CLK_CLK_OUT_2 246 +#define TEGRA210_CLK_CLK_OUT_3 247 +#define TEGRA210_CLK_BLINK 248 +/* 249 */ +/* 250 */ +/* 251 */ +#define TEGRA210_CLK_XUSB_HOST_SRC 252 +#define TEGRA210_CLK_XUSB_FALCON_SRC 253 +#define TEGRA210_CLK_XUSB_FS_SRC 254 +#define TEGRA210_CLK_XUSB_SS_SRC 255 + +#define TEGRA210_CLK_XUSB_DEV_SRC 256 +#define TEGRA210_CLK_XUSB_DEV 257 +#define TEGRA210_CLK_XUSB_HS_SRC 258 +#define TEGRA210_CLK_SCLK 259 +#define TEGRA210_CLK_HCLK 260 +#define TEGRA210_CLK_PCLK 261 +/* 262 */ +/* 263 */ +#define TEGRA210_CLK_DFLL_REF 264 +#define TEGRA210_CLK_DFLL_SOC 265 +#define TEGRA210_CLK_VI_SENSOR2 266 +#define TEGRA210_CLK_PLL_P_OUT5 267 +#define TEGRA210_CLK_CML0 268 +#define TEGRA210_CLK_CML1 269 +#define TEGRA210_CLK_PLL_C4 270 +#define TEGRA210_CLK_PLL_DP 271 +#define TEGRA210_CLK_PLL_E_MUX 272 +#define TEGRA210_CLK_PLLD_DSI 273 +/* 274 */ +/* 275 */ +/* 276 */ +/* 277 */ +/* 278 */ +/* 279 */ +/* 280 */ +/* 281 */ +/* 282 */ +/* 283 */ +/* 284 */ +/* 285 */ +/* 286 */ +/* 287 */ + +/* 288 */ +/* 289 */ +/* 290 */ +/* 291 */ +/* 292 */ +/* 293 */ +/* 294 */ +/* 295 */ +/* 296 */ +/* 297 */ +/* 298 */ +/* 299 */ +#define TEGRA210_CLK_AUDIO0_MUX 300 +#define TEGRA210_CLK_AUDIO1_MUX 301 +#define TEGRA210_CLK_AUDIO2_MUX 302 +#define TEGRA210_CLK_AUDIO3_MUX 303 +#define TEGRA210_CLK_AUDIO4_MUX 304 +#define TEGRA210_CLK_SPDIF_MUX 305 +#define TEGRA210_CLK_CLK_OUT_1_MUX 306 +#define TEGRA210_CLK_CLK_OUT_2_MUX 307 +#define TEGRA210_CLK_CLK_OUT_3_MUX 308 +/* 309 */ +/* 310 */ +#define TEGRA210_CLK_SOR0_LVDS 311 +#define TEGRA210_CLK_XUSB_SS_DIV2 312 + +#define TEGRA210_CLK_PLL_M_UD 313 +#define TEGRA210_CLK_PLL_C_UD 314 + +#define TEGRA210_CLK_PLL_X 227 +#define TEGRA210_CLK_PLL_X_OUT0 228 + +#define TEGRA210_CLK_CCLK_G 262 +#define TEGRA210_CLK_CCLK_LP 263 + +#define TEGRA210_CLK_CLK_MAX 315 + +#endif /* _DT_BINDINGS_CLOCK_TEGRA210_CAR_H */ diff --git a/include/dwmmc.h b/include/dwmmc.h index 86a5491..7a7555a 100644 --- a/include/dwmmc.h +++ b/include/dwmmc.h @@ -129,8 +129,24 @@ /* quirks */ #define DWMCI_QUIRK_DISABLE_SMU (1 << 0) +/** + * struct dwmci_host - Information about a designware MMC host + * + * @name: Device name + * @ioaddr: Base I/O address of controller + * @quirks: Quick flags - see DWMCI_QUIRK_... + * @caps: Capabilities - see MMC_MODE_... + * @bus_hz: Bus speed in Hz, if @get_mmc_clk() is NULL + * @div: Arbitrary clock divider value for use by controller + * @dev_index: Arbitrary device index for use by controller + * @dev_id: Arbitrary device ID for use by controller + * @buswidth: Bus width in bits (8 or 4) + * @fifoth_val: Value for FIFOTH register (or 0 to leave unset) + * @mmc: Pointer to generic MMC structure for this device + * @priv: Private pointer for use by controller + */ struct dwmci_host { - char *name; + const char *name; void *ioaddr; unsigned int quirks; unsigned int caps; diff --git a/include/exports.h b/include/exports.h index 1a01e43..a3e0469 100644 --- a/include/exports.h +++ b/include/exports.h @@ -2,6 +2,10 @@ #define __EXPORTS_H__ #ifndef __ASSEMBLY__ +#ifdef CONFIG_PHY_AQUANTIA +#include <miiphy.h> +#include <phy.h> +#endif struct spi_slave; @@ -34,6 +38,13 @@ unsigned long long ustrtoull(const char *cp, char **endp, unsigned int base); int i2c_write (uchar, uint, int , uchar* , int); int i2c_read (uchar, uint, int , uchar* , int); #endif +#ifdef CONFIG_PHY_AQUANTIA +struct mii_dev *mdio_get_current_dev(void); +struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask, + phy_interface_t interface); +struct phy_device *mdio_phydev_for_ethname(const char *ethname); +int miiphy_set_current_dev(const char *devname); +#endif void app_startup(char * const *); @@ -46,7 +57,7 @@ struct jt_funcs { }; -#define XF_VERSION 7 +#define XF_VERSION 8 #if defined(CONFIG_X86) extern gd_t *global_data; diff --git a/include/fdt_support.h b/include/fdt_support.h index 0edc4fa..296add0 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -67,8 +67,34 @@ void do_fixup_by_compat(void *fdt, const char *compat, const char *prop, const void *val, int len, int create); void do_fixup_by_compat_u32(void *fdt, const char *compat, const char *prop, u32 val, int create); +/** + * Setup the memory node in the DT. Creates one if none was existing before. + * Calls fdt_fixup_memory_banks() to populate a single reg pair covering the + * whole memory. + * + * @param blob FDT blob to update + * @param start Begin of DRAM mapping in physical memory + * @param size Size of the single memory bank + * @return 0 if ok, or -1 or -FDT_ERR_... on error + */ int fdt_fixup_memory(void *blob, u64 start, u64 size); + +/** + * Fill the DT memory node with multiple memory banks. + * Creates the node if none was existing before. + * If banks is 0, it will not touch the existing reg property. This allows + * boards to not mess with the existing DT setup, which may have been + * filled in properly before. + * + * @param blob FDT blob to update + * @param start Array of size <banks> to hold the start addresses. + * @param size Array of size <banks> to hold the size of each region. + * @param banks Number of memory banks to create. If 0, the reg + * property will be left untouched. + * @return 0 if ok, or -1 or -FDT_ERR_... on error + */ int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks); + void fdt_fixup_ethernet(void *fdt); int fdt_find_and_setprop(void *fdt, const char *node, const char *prop, const void *val, int len, int create); diff --git a/include/fdtdec.h b/include/fdtdec.h index 2323603..4b3f8d1 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -137,6 +137,7 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA124_SOR, /* Tegra 124 Serial Output Resource */ COMPAT_NVIDIA_TEGRA124_PMC, /* Tegra 124 power mgmt controller */ COMPAT_NVIDIA_TEGRA20_DC, /* Tegra 2 Display controller */ + COMPAT_NVIDIA_TEGRA210_SDMMC, /* Tegra210 SDMMC controller */ COMPAT_NVIDIA_TEGRA124_SDMMC, /* Tegra124 SDMMC controller */ COMPAT_NVIDIA_TEGRA30_SDMMC, /* Tegra30 SDMMC controller */ COMPAT_NVIDIA_TEGRA20_SDMMC, /* Tegra20 SDMMC controller */ @@ -145,6 +146,8 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA20_PCIE, /* Tegra 20 PCIe controller */ COMPAT_NVIDIA_TEGRA124_XUSB_PADCTL, /* Tegra124 XUSB pad controller */ + COMPAT_NVIDIA_TEGRA210_XUSB_PADCTL, + /* Tegra210 XUSB pad controller */ COMPAT_SMSC_LAN9215, /* SMSC 10/100 Ethernet LAN9215 */ COMPAT_SAMSUNG_EXYNOS5_SROMC, /* Exynos5 SROMC */ COMPAT_SAMSUNG_S3C2440_I2C, /* Exynos I2C Controller */ diff --git a/include/fsl-mc/fsl_dpio.h b/include/fsl-mc/fsl_dpio.h index e84b419..e779909 100644 --- a/include/fsl-mc/fsl_dpio.h +++ b/include/fsl-mc/fsl_dpio.h @@ -8,8 +8,8 @@ #define _FSL_DPIO_H /* DPIO Version */ -#define DPIO_VER_MAJOR 2 -#define DPIO_VER_MINOR 1 +#define DPIO_VER_MAJOR 3 +#define DPIO_VER_MINOR 0 /* Command IDs */ #define DPIO_CMDID_CLOSE 0x800 @@ -31,8 +31,8 @@ do { \ MC_RSP_OP(cmd, 0, 32, 16, uint16_t, attr->qbman_portal_id);\ MC_RSP_OP(cmd, 0, 48, 8, uint8_t, attr->num_priorities);\ MC_RSP_OP(cmd, 0, 56, 4, enum dpio_channel_mode, attr->channel_mode);\ - MC_RSP_OP(cmd, 1, 0, 64, uint64_t, attr->qbman_portal_ce_paddr);\ - MC_RSP_OP(cmd, 2, 0, 64, uint64_t, attr->qbman_portal_ci_paddr);\ + MC_RSP_OP(cmd, 1, 0, 64, uint64_t, attr->qbman_portal_ce_offset);\ + MC_RSP_OP(cmd, 2, 0, 64, uint64_t, attr->qbman_portal_ci_offset);\ MC_RSP_OP(cmd, 3, 0, 16, uint16_t, attr->version.major);\ MC_RSP_OP(cmd, 3, 16, 16, uint16_t, attr->version.minor);\ } while (0) @@ -42,6 +42,7 @@ do { \ */ struct fsl_mc_io; + /** * dpio_open() - Open a control session for the specified object * @mc_io: Pointer to MC portal's I/O object @@ -61,18 +62,9 @@ struct fsl_mc_io; int dpio_open(struct fsl_mc_io *mc_io, int dpio_id, uint16_t *token); /** - * dpio_open() - Open a control session for the specified object + * dpio_close() - Close the control session of the object * @mc_io: Pointer to MC portal's I/O object - * @dpio_id: DPIO unique ID - * @token: Returned token; use in subsequent API calls - * - * This function can be used to open a control session for an - * already created object; an object may have been declared in - * the DPL or by calling the dpio_create() function. - * This function returns a unique authentication token, - * associated with the specific object ID and the specific MC - * portal; this token must be used in all subsequent commands for - * this specific object. + * @token: Token of DPIO object * * Return: '0' on Success; Error code otherwise. */ @@ -121,10 +113,8 @@ int dpio_reset(struct fsl_mc_io *mc_io, uint16_t token); * struct dpio_attr - Structure representing DPIO attributes * @id: DPIO object ID * @version: DPIO version - * @qbman_portal_ce_paddr: Physical address of the software portal - * cache-enabled area - * @qbman_portal_ci_paddr: Physical address of the software portal - * cache-inhibited area + * @qbman_portal_ce_offset: offset of the software portal cache-enabled area + * @qbman_portal_ci_offset: offset of the software portal cache-inhibited area * @qbman_portal_id: Software portal ID * @channel_mode: Notification channel mode * @num_priorities: Number of priorities for the notification channel (1-8); @@ -141,8 +131,8 @@ struct dpio_attr { uint16_t major; uint16_t minor; } version; - uint64_t qbman_portal_ce_paddr; - uint64_t qbman_portal_ci_paddr; + uint64_t qbman_portal_ce_offset; + uint64_t qbman_portal_ci_offset; uint16_t qbman_portal_id; enum dpio_channel_mode channel_mode; uint8_t num_priorities; diff --git a/include/fsl-mc/fsl_dpmng.h b/include/fsl-mc/fsl_dpmng.h index 986e7c8..6feb292 100644 --- a/include/fsl-mc/fsl_dpmng.h +++ b/include/fsl-mc/fsl_dpmng.h @@ -14,7 +14,7 @@ struct fsl_mc_io; /** * Management Complex firmware version information */ -#define MC_VER_MAJOR 6 +#define MC_VER_MAJOR 7 #define MC_VER_MINOR 0 /** diff --git a/include/fsl-mc/fsl_dpni.h b/include/fsl-mc/fsl_dpni.h index 67c087d..26b67f0 100644 --- a/include/fsl-mc/fsl_dpni.h +++ b/include/fsl-mc/fsl_dpni.h @@ -7,7 +7,7 @@ #define _FSL_DPNI_H /* DPNI Version */ -#define DPNI_VER_MAJOR 4 +#define DPNI_VER_MAJOR 5 #define DPNI_VER_MINOR 0 /* Command IDs */ @@ -78,7 +78,7 @@ do { \ MC_RSP_OP(cmd, 0, 32, 8, uint8_t, attr->max_tcs); \ MC_RSP_OP(cmd, 0, 40, 8, uint8_t, attr->max_senders); \ MC_RSP_OP(cmd, 0, 48, 8, enum net_prot, attr->start_hdr); \ - MC_RSP_OP(cmd, 1, 0, 64, uint64_t, attr->options); \ + MC_RSP_OP(cmd, 1, 0, 32, uint32_t, attr->options); \ MC_RSP_OP(cmd, 2, 0, 8, uint8_t, attr->max_unicast_filters); \ MC_RSP_OP(cmd, 2, 8, 8, uint8_t, attr->max_multicast_filters);\ MC_RSP_OP(cmd, 2, 16, 8, uint8_t, attr->max_vlan_filters); \ @@ -98,7 +98,9 @@ do { \ MC_RSP_OP(cmd, 4, 16, 16, uint16_t, \ attr->ipr_cfg.min_frag_size_ipv4); \ MC_RSP_OP(cmd, 4, 32, 16, uint16_t, \ - attr->ipr_cfg.min_frag_size_ipv6); \ + attr->ipr_cfg.min_frag_size_ipv6);\ + MC_RSP_OP(cmd, 4, 48, 8, uint8_t, attr->max_policers); \ + MC_RSP_OP(cmd, 4, 56, 8, uint8_t, attr->max_congestion_ctrl); \ MC_RSP_OP(cmd, 5, 0, 16, uint16_t, \ attr->ipr_cfg.max_open_frames_ipv4); \ MC_RSP_OP(cmd, 5, 16, 16, uint16_t, \ @@ -208,7 +210,7 @@ do { \ /* cmd, param, offset, width, type, arg_name */ #define DPNI_CMD_SET_LINK_CFG(cmd, cfg) \ do { \ - MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->rate);\ + MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->rate);\ MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->options);\ } while (0) @@ -216,7 +218,7 @@ do { \ #define DPNI_RSP_GET_LINK_STATE(cmd, state) \ do { \ MC_RSP_OP(cmd, 0, 32, 1, int, state->up);\ - MC_RSP_OP(cmd, 1, 0, 64, uint64_t, state->rate);\ + MC_RSP_OP(cmd, 1, 0, 32, uint32_t, state->rate);\ MC_RSP_OP(cmd, 2, 0, 64, uint64_t, state->options);\ } while (0) @@ -326,6 +328,13 @@ do { \ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->user_ctx); \ MC_CMD_OP(cmd, 2, 16, 8, uint8_t, tc_id); \ MC_CMD_OP(cmd, 2, 32, 32, uint32_t, cfg->options); \ + MC_CMD_OP(cmd, 3, 0, 4, enum dpni_flc_type, cfg->flc_cfg.flc_type); \ + MC_CMD_OP(cmd, 3, 4, 4, enum dpni_stash_size, \ + cfg->flc_cfg.frame_data_size);\ + MC_CMD_OP(cmd, 3, 8, 4, enum dpni_stash_size, \ + cfg->flc_cfg.flow_context_size);\ + MC_CMD_OP(cmd, 3, 32, 32, uint32_t, cfg->flc_cfg.options);\ + MC_CMD_OP(cmd, 4, 0, 64, uint64_t, cfg->flc_cfg.flow_context);\ } while (0) /* cmd, param, offset, width, type, arg_name */ @@ -343,6 +352,13 @@ do { \ MC_RSP_OP(cmd, 0, 40, 2, enum dpni_dest, attr->dest_cfg.dest_type); \ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, attr->user_ctx); \ MC_RSP_OP(cmd, 2, 32, 32, uint32_t, attr->fqid); \ + MC_RSP_OP(cmd, 3, 0, 4, enum dpni_flc_type, attr->flc_cfg.flc_type); \ + MC_RSP_OP(cmd, 3, 4, 4, enum dpni_stash_size, \ + attr->flc_cfg.frame_data_size);\ + MC_RSP_OP(cmd, 3, 8, 4, enum dpni_stash_size, \ + attr->flc_cfg.flow_context_size);\ + MC_RSP_OP(cmd, 3, 32, 32, uint32_t, attr->flc_cfg.options);\ + MC_RSP_OP(cmd, 4, 0, 64, uint64_t, attr->flc_cfg.flow_context);\ } while (0) enum net_prot { @@ -399,7 +415,8 @@ enum net_prot { NET_PROT_DUMMY_LAST }; -/* Data Path Network Interface API +/** + * Data Path Network Interface API * Contains initialization APIs and runtime control APIs for DPNI */ @@ -545,6 +562,8 @@ int dpni_reset(struct fsl_mc_io *mc_io, uint16_t token); * @max_qos_entries: if 'max_tcs > 1', declares the maximum entries in QoS table * @max_qos_key_size: Maximum key size for the QoS look-up * @max_dist_key_size: Maximum key size for the distribution look-up + * @max_policers: Maximum number of policers; + * @max_congestion_ctrl: Maximum number of congestion control groups (CGs); * @ipr_cfg: IP reassembly configuration */ struct dpni_attr { @@ -559,7 +578,7 @@ struct dpni_attr { uint16_t minor; } version; enum net_prot start_hdr; - uint64_t options; + uint32_t options; uint8_t max_senders; uint8_t max_tcs; uint8_t max_dist_per_tc[DPNI_MAX_TC]; @@ -569,8 +588,11 @@ struct dpni_attr { uint8_t max_qos_entries; uint8_t max_qos_key_size; uint8_t max_dist_key_size; + uint8_t max_policers; + uint8_t max_congestion_ctrl; struct dpni_ipr_cfg ipr_cfg; }; + /** * dpni_get_attributes() - Retrieve DPNI attributes. * @mc_io: Pointer to MC portal's I/O objec @@ -634,6 +656,7 @@ struct dpni_buffer_layout { int dpni_get_rx_buffer_layout(struct fsl_mc_io *mc_io, uint16_t token, struct dpni_buffer_layout *layout); + /** * dpni_set_rx_buffer_layout() - Set Rx buffer layout configuration. * @mc_io: Pointer to MC portal's I/O object @@ -661,19 +684,19 @@ int dpni_get_tx_buffer_layout(struct fsl_mc_io *mc_io, struct dpni_buffer_layout *layout); /** - * @brief Set Tx buffer layout configuration. - * - * @param[in] mc_io Pointer to MC portal's I/O object - * @param[in] token Token of DPNI object - * @param[in] layout Buffer layout configuration + * dpni_set_tx_buffer_layout() - Set Tx buffer layout configuration. + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @layout: Buffer layout configuration * - * @returns '0' on Success; Error code otherwise. + * Return: '0' on Success; Error code otherwise. * * @warning Allowed only when DPNI is disabled */ int dpni_set_tx_buffer_layout(struct fsl_mc_io *mc_io, uint16_t token, const struct dpni_buffer_layout *layout); + /** * dpni_get_tx_conf_buffer_layout() - Retrieve Tx confirmation buffer layout * attributes. @@ -686,6 +709,7 @@ int dpni_set_tx_buffer_layout(struct fsl_mc_io *mc_io, int dpni_get_tx_conf_buffer_layout(struct fsl_mc_io *mc_io, uint16_t token, struct dpni_buffer_layout *layout); + /** * dpni_set_tx_conf_buffer_layout() - Set Tx confirmation buffer layout * configuration. @@ -700,15 +724,16 @@ int dpni_get_tx_conf_buffer_layout(struct fsl_mc_io *mc_io, int dpni_set_tx_conf_buffer_layout(struct fsl_mc_io *mc_io, uint16_t token, const struct dpni_buffer_layout *layout); + /** - * dpni_get_spid() - Get the AIOP storage profile ID associated with the DPNI + * dpni_get_qdid() - Get the Queuing Destination ID (QDID) that should be used + * for enqueue operations * @mc_io: Pointer to MC portal's I/O object * @token: Token of DPNI object - * @spid: Returned aiop storage-profile ID + * @qdid: Returned virtual QDID value that should be used as an argument + * in all enqueue operations * * Return: '0' on Success; Error code otherwise. - * - * @warning Only relevant for DPNI that belongs to AIOP container. */ int dpni_get_qdid(struct fsl_mc_io *mc_io, uint16_t token, uint16_t *qdid); @@ -781,13 +806,23 @@ int dpni_set_counter(struct fsl_mc_io *mc_io, uint16_t token, enum dpni_counter counter, uint64_t value); + +/* Enable auto-negotiation */ +#define DPNI_LINK_OPT_AUTONEG 0x0000000000000001ULL +/* Enable half-duplex mode */ +#define DPNI_LINK_OPT_HALF_DUPLEX 0x0000000000000002ULL +/* Enable pause frames */ +#define DPNI_LINK_OPT_PAUSE 0x0000000000000004ULL +/* Enable a-symmetric pause frames */ +#define DPNI_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL + /** * struct - Structure representing DPNI link configuration * @rate: Rate * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values */ struct dpni_link_cfg { - uint64_t rate; + uint32_t rate; uint64_t options; }; @@ -801,7 +836,7 @@ struct dpni_link_cfg { */ int dpni_set_link_cfg(struct fsl_mc_io *mc_io, uint16_t token, - struct dpni_link_cfg *cfg); + const struct dpni_link_cfg *cfg); /** * struct dpni_link_state - Structure representing DPNI link state @@ -810,7 +845,7 @@ int dpni_set_link_cfg(struct fsl_mc_io *mc_io, * @up: Link state; '0' for down, '1' for up */ struct dpni_link_state { - uint64_t rate; + uint32_t rate; uint64_t options; int up; }; @@ -838,6 +873,7 @@ int dpni_get_link_state(struct fsl_mc_io *mc_io, int dpni_set_primary_mac_addr(struct fsl_mc_io *mc_io, uint16_t token, const uint8_t mac_addr[6]); + /** * dpni_get_primary_mac_addr() - Get the primary MAC address * @mc_io: Pointer to MC portal's I/O object @@ -849,6 +885,7 @@ int dpni_set_primary_mac_addr(struct fsl_mc_io *mc_io, int dpni_get_primary_mac_addr(struct fsl_mc_io *mc_io, uint16_t token, uint8_t mac_addr[6]); + /** * dpni_add_mac_addr() - Add MAC address filter * @mc_io: Pointer to MC portal's I/O object @@ -875,7 +912,7 @@ int dpni_remove_mac_addr(struct fsl_mc_io *mc_io, /** * enum dpni_dest - DPNI destination types - * DPNI_DEST_NONE: Unassigned destination; The queue is set in parked mode and + * @DPNI_DEST_NONE: Unassigned destination; The queue is set in parked mode and * does not generate FQDAN notifications; user is expected to * dequeue from the queue based on polling or other user-defined * method @@ -906,12 +943,69 @@ struct dpni_dest_cfg { uint8_t priority; }; +/** + * enum dpni_flc_type - DPNI FLC types + * @DPNI_FLC_USER_DEFINED: select the FLC to be used for user defined value + * @DPNI_FLC_STASH: select the FLC to be used for stash control + */ +enum dpni_flc_type { + DPNI_FLC_USER_DEFINED = 0, + DPNI_FLC_STASH = 1, +}; + +/** + * enum dpni_stash_size - DPNI FLC stashing size + * @DPNI_STASH_SIZE_0B: no stash + * @DPNI_STASH_SIZE_64B: stashes 64 bytes + * @DPNI_STASH_SIZE_128B: stashes 128 bytes + * @DPNI_STASH_SIZE_192B: stashes 192 bytes + */ +enum dpni_stash_size { + DPNI_STASH_SIZE_0B = 0, + DPNI_STASH_SIZE_64B = 1, + DPNI_STASH_SIZE_128B = 2, + DPNI_STASH_SIZE_192B = 3, +}; + +/* DPNI FLC stash options */ + +/* stashes the whole annotation area (up to 192 bytes) */ +#define DPNI_FLC_STASH_FRAME_ANNOTATION 0x00000001 + +/** + * struct dpni_flc_cfg - Structure representing DPNI FLC configuration + * @flc_type: FLC type + * @options: Mask of available options; + * use 'DPNI_FLC_STASH_<X>' values + * @frame_data_size: Size of frame data to be stashed + * @flow_context_size: Size of flow context to be stashed + * @flow_context: 1. In case flc_type is 'DPNI_FLC_USER_DEFINED': + * this value will be provided in the frame descriptor + * (FD[FLC]) + * 2. In case flc_type is 'DPNI_FLC_STASH': + * this value will be I/O virtual address of the + * flow-context; + * Must be cacheline-aligned and DMA-able memory + */ +struct dpni_flc_cfg { + enum dpni_flc_type flc_type; + uint32_t options; + enum dpni_stash_size frame_data_size; + enum dpni_stash_size flow_context_size; + uint64_t flow_context; +}; + /* DPNI queue modification options */ /* Select to modify the user's context associated with the queue */ #define DPNI_QUEUE_OPT_USER_CTX 0x00000001 /* Select to modify the queue's destination */ #define DPNI_QUEUE_OPT_DEST 0x00000002 +/** Select to modify the flow-context parameters; + * not applicable for Tx-conf/Err queues as the FD comes from the user + */ +#define DPNI_QUEUE_OPT_FLC 0x00000004 + /** * struct dpni_queue_cfg - Structure representing queue configuration @@ -922,11 +1016,17 @@ struct dpni_dest_cfg { * is contained in 'options' * @dest_cfg: Queue destination parameters; * valid only if 'DPNI_QUEUE_OPT_DEST' is contained in 'options' + * @flc_cfg: Flow context configuration; in case the TC's distribution + * is either NONE or HASH the FLC's settings of flow#0 are used. + * in the case of FS (flow-steering) the flow's FLC settings + * are used. + * valid only if 'DPNI_QUEUE_OPT_FLC' is contained in 'options' */ struct dpni_queue_cfg { uint32_t options; uint64_t user_ctx; struct dpni_dest_cfg dest_cfg; + struct dpni_flc_cfg flc_cfg; }; /** @@ -934,11 +1034,13 @@ struct dpni_queue_cfg { * @user_ctx: User context value provided in the frame descriptor of each * dequeued frame * @dest_cfg: Queue destination configuration + * @flc_cfg: Flow context configuration * @fqid: Virtual fqid value to be used for dequeue operations */ struct dpni_queue_attr { uint64_t user_ctx; struct dpni_dest_cfg dest_cfg; + struct dpni_flc_cfg flc_cfg; uint32_t fqid; }; diff --git a/include/fsl-mc/fsl_dprc.h b/include/fsl-mc/fsl_dprc.h index f837e89..26a4598 100644 --- a/include/fsl-mc/fsl_dprc.h +++ b/include/fsl-mc/fsl_dprc.h @@ -10,7 +10,7 @@ #define _FSL_DPRC_H /* DPRC Version */ -#define DPRC_VER_MAJOR 2 +#define DPRC_VER_MAJOR 4 #define DPRC_VER_MINOR 0 /* Command IDs */ @@ -88,6 +88,22 @@ do { \ MC_RSP_OP(cmd, 4, 40, 8, char, obj_desc->type[13]);\ MC_RSP_OP(cmd, 4, 48, 8, char, obj_desc->type[14]);\ MC_RSP_OP(cmd, 4, 56, 8, char, obj_desc->type[15]);\ + MC_RSP_OP(cmd, 5, 0, 8, char, obj_desc->label[0]);\ + MC_RSP_OP(cmd, 5, 8, 8, char, obj_desc->label[1]);\ + MC_RSP_OP(cmd, 5, 16, 8, char, obj_desc->label[2]);\ + MC_RSP_OP(cmd, 5, 24, 8, char, obj_desc->label[3]);\ + MC_RSP_OP(cmd, 5, 32, 8, char, obj_desc->label[4]);\ + MC_RSP_OP(cmd, 5, 40, 8, char, obj_desc->label[5]);\ + MC_RSP_OP(cmd, 5, 48, 8, char, obj_desc->label[6]);\ + MC_RSP_OP(cmd, 5, 56, 8, char, obj_desc->label[7]);\ + MC_RSP_OP(cmd, 6, 0, 8, char, obj_desc->label[8]);\ + MC_RSP_OP(cmd, 6, 8, 8, char, obj_desc->label[9]);\ + MC_RSP_OP(cmd, 6, 16, 8, char, obj_desc->label[10]);\ + MC_RSP_OP(cmd, 6, 24, 8, char, obj_desc->label[11]);\ + MC_RSP_OP(cmd, 6, 32, 8, char, obj_desc->label[12]);\ + MC_RSP_OP(cmd, 6, 40, 8, char, obj_desc->label[13]);\ + MC_RSP_OP(cmd, 6, 48, 8, char, obj_desc->label[14]);\ + MC_RSP_OP(cmd, 6, 56, 8, char, obj_desc->label[15]);\ } while (0) /* cmd, param, offset, width, type, arg_name */ @@ -175,11 +191,33 @@ do { \ /* param, offset, width, type, arg_name */ #define DPRC_RSP_GET_OBJ_REGION(cmd, region_desc) \ do { \ - MC_RSP_OP(cmd, 1, 0, 64, uint64_t, region_desc->base_paddr);\ + MC_RSP_OP(cmd, 1, 0, 64, uint64_t, region_desc->base_offset);\ MC_RSP_OP(cmd, 2, 0, 32, uint32_t, region_desc->size); \ } while (0) /* cmd, param, offset, width, type, arg_name */ +#define DPRC_CMD_SET_OBJ_LABEL(cmd, obj_index, label) \ +do { \ + MC_CMD_OP(cmd, 0, 0, 32, int, obj_index); \ + MC_CMD_OP(cmd, 1, 0, 8, char, label[0]);\ + MC_CMD_OP(cmd, 1, 8, 8, char, label[1]);\ + MC_CMD_OP(cmd, 1, 16, 8, char, label[2]);\ + MC_CMD_OP(cmd, 1, 24, 8, char, label[3]);\ + MC_CMD_OP(cmd, 1, 32, 8, char, label[4]);\ + MC_CMD_OP(cmd, 1, 40, 8, char, label[5]);\ + MC_CMD_OP(cmd, 1, 48, 8, char, label[6]);\ + MC_CMD_OP(cmd, 1, 56, 8, char, label[7]);\ + MC_CMD_OP(cmd, 2, 0, 8, char, label[8]);\ + MC_CMD_OP(cmd, 2, 8, 8, char, label[9]);\ + MC_CMD_OP(cmd, 2, 16, 8, char, label[10]);\ + MC_CMD_OP(cmd, 2, 24, 8, char, label[11]);\ + MC_CMD_OP(cmd, 2, 32, 8, char, label[12]);\ + MC_CMD_OP(cmd, 2, 40, 8, char, label[13]);\ + MC_CMD_OP(cmd, 2, 48, 8, char, label[14]);\ + MC_CMD_OP(cmd, 2, 56, 8, char, label[15]);\ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ #define DPRC_CMD_CONNECT(cmd, endpoint1, endpoint2) \ do { \ MC_CMD_OP(cmd, 0, 0, 32, int, endpoint1->id); \ @@ -294,6 +332,7 @@ do { \ /* Data Path Resource Container API * Contains DPRC API for managing and querying DPAA resources */ + struct fsl_mc_io; /** @@ -366,7 +405,7 @@ int dprc_close(struct fsl_mc_io *mc_io, uint16_t token); /* Object initialization allowed - software context associated with this * container is allowed to invoke object initialization operations. */ -#define DPRC_CFG_OPT_OBJ_CREATE_ALLOWED 0x00000004 +#define DPRC_CFG_OPT_OBJ_CREATE_ALLOWED 0x00000004 /* Topology change allowed - software context associated with this * container is allowed to invoke topology operations, such as attach/detach @@ -389,11 +428,13 @@ int dprc_close(struct fsl_mc_io *mc_io, uint16_t token); * @portal_id: Portal ID; if set to 'DPRC_GET_PORTAL_ID_FROM_POOL', a free * portal ID is allocated by the DPRC * @options: Combination of 'DPRC_CFG_OPT_<X>' options + * @label: Object's label */ struct dprc_cfg { uint16_t icid; int portal_id; uint64_t options; + char label[16]; }; /** @@ -484,6 +525,7 @@ int dprc_get_obj_count(struct fsl_mc_io *mc_io, uint16_t token, int *obj_count); * @irq_count: Number of interrupts supported by the object * @region_count: Number of mappable regions supported by the object * @state: Object state: combination of DPRC_OBJ_STATE_ states + * @label: Object label */ struct dprc_obj_desc { char type[16]; @@ -494,6 +536,7 @@ struct dprc_obj_desc { uint8_t irq_count; uint8_t region_count; uint32_t state; + char label[16]; }; /** @@ -516,8 +559,8 @@ int dprc_get_obj(struct fsl_mc_io *mc_io, struct dprc_obj_desc *obj_desc); /** - * dprc_get_res_count() - Obtains the number of free resources that are assigned - * to this container, by pool type + * dprc_get_res_count() - Obtains the number of free resources that are + * assigned to this container, by pool type * @mc_io: Pointer to MC portal's I/O object * @token: Token of DPRC object * @type: pool type @@ -574,11 +617,14 @@ int dprc_get_res_ids(struct fsl_mc_io *mc_io, /** * struct dprc_region_desc - Mappable region descriptor - * @base_paddr: Region base physical address + * @base_offset: Region offset from region's base address. + * For DPMCP and DPRC objects, region base is offset from SoC MC portals + * base address; For DPIO, region base is offset from SoC QMan portals + * base address * @size: Region size (in bytes) */ struct dprc_region_desc { - uint64_t base_paddr; + uint64_t base_offset; uint32_t size; }; @@ -642,8 +688,8 @@ int dprc_disconnect(struct fsl_mc_io *mc_io, /** * dprc_get_connection() - Get connected endpoint and link status if connection * exists. -* @mc_io Pointer to MC portal's I/O object -* @token Token of DPRC object +* @mc_io Pointer to MC portal's I/O object +* @token Token of DPRC object * @endpoint1 Endpoint 1 configuration parameters * @endpoint2 Returned endpoint 2 configuration parameters * @state: Returned link state: 1 - link is up, 0 - link is down diff --git a/include/fsl-mc/fsl_mc.h b/include/fsl-mc/fsl_mc.h index ec24415..9106f25 100644 --- a/include/fsl-mc/fsl_mc.h +++ b/include/fsl-mc/fsl_mc.h @@ -21,12 +21,9 @@ #define GCR1_M2_DE_RST BIT(14) #define GCR1_M_ALL_DE_RST (GCR1_M1_DE_RST | GCR1_M2_DE_RST) #define GSR_FS_MASK 0x3fffffff -#define MCFAPR_PL_MASK (0x1 << 18) -#define MCFAPR_BMT_MASK (0x1 << 17) -#define MCFAPR_BYPASS_ICID_MASK \ - (MCFAPR_PL_MASK | MCFAPR_BMT_MASK) #define SOC_MC_PORTALS_BASE_ADDR ((void __iomem *)0x00080C000000) +#define SOC_QBMAN_PORTALS_BASE_ADDR ((void __iomem *)0x000818000000) #define SOC_MC_PORTAL_STRIDE 0x10000 #define SOC_MC_PORTAL_ADDR(_portal_id) \ diff --git a/include/fsl_ddr.h b/include/fsl_ddr.h index 4099a74..728503b 100644 --- a/include/fsl_ddr.h +++ b/include/fsl_ddr.h @@ -136,4 +136,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, unsigned int controller_number, unsigned int dimm_number); +void update_spd_address(unsigned int ctrl_num, + unsigned int slot, + unsigned int *addr); #endif diff --git a/include/g_dnl.h b/include/g_dnl.h index 4eeb5e4..ba49f1f 100644 --- a/include/g_dnl.h +++ b/include/g_dnl.h @@ -34,6 +34,7 @@ struct g_dnl_bind_callback { }; int g_dnl_bind_fixup(struct usb_device_descriptor *, const char *); +int g_dnl_get_board_bcd_device_number(int gcnum); int g_dnl_board_usb_cable_connected(void); int g_dnl_register(const char *s); void g_dnl_unregister(void); diff --git a/include/image.h b/include/image.h index b6eb57e..63c3d37 100644 --- a/include/image.h +++ b/include/image.h @@ -246,6 +246,8 @@ struct lmb; #define IH_TYPE_LPC32XXIMAGE 21 /* x86 setup.bin Image */ #define IH_TYPE_LOADABLE 22 /* A list of typeless images */ +#define IH_TYPE_COUNT 23 /* Number of image types */ + /* * Compression Types */ @@ -411,6 +413,15 @@ char *get_table_entry_name(const table_entry_t *table, char *msg, int id); const char *genimg_get_os_name(uint8_t os); const char *genimg_get_arch_name(uint8_t arch); const char *genimg_get_type_name(uint8_t type); + +/** + * genimg_get_type_short_name() - get the short name for an image type + * + * @param type Image type (IH_TYPE_...) + * @return image short name, or "unknown" if unknown + */ +const char *genimg_get_type_short_name(uint8_t type); + const char *genimg_get_comp_name(uint8_t comp); int genimg_get_os_id(const char *name); int genimg_get_arch_id(const char *name); diff --git a/include/led.h b/include/led.h new file mode 100644 index 0000000..b929d0c --- /dev/null +++ b/include/led.h @@ -0,0 +1,51 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LED_H +#define __LED_H + +/** + * struct led_uclass_plat - Platform data the uclass stores about each device + * + * @label: LED label + */ +struct led_uclass_plat { + const char *label; +}; + +struct led_ops { + /** + * set_on() - set the state of an LED + * + * @dev: LED device to change + * @on: 1 to turn the LED on, 0 to turn it off + * @return 0 if OK, -ve on error + */ + int (*set_on)(struct udevice *dev, int on); +}; + +#define led_get_ops(dev) ((struct led_ops *)(dev)->driver->ops) + +/** + * led_get_by_label() - Find an LED device by label + * + * @label: LED label to look up + * @devp: Returns the associated device, if found + * @return 0 if found, -ENODEV if not found, other -ve on error + */ +int led_get_by_label(const char *label, struct udevice **devp); + +/** + * led_set_on() - set the state of an LED + * + * @dev: LED device to change + * @on: 1 to turn the LED on, 0 to turn it off + * @return 0 if OK, -ve on error + */ +int led_set_on(struct udevice *dev, int on); + +#endif diff --git a/include/libfdt.h b/include/libfdt.h index f3cbb63..e48c21a 100644 --- a/include/libfdt.h +++ b/include/libfdt.h @@ -121,7 +121,12 @@ /* FDT_ERR_BADNCELLS: Device tree has a #address-cells, #size-cells * or similar property with a bad format or value */ -#define FDT_ERR_MAX 14 +#define FDT_ERR_TOODEEP 15 + /* FDT_ERR_TOODEEP: The depth of a node has exceeded the internal + * libfdt limit. This can happen if you have more than + * FDT_MAX_DEPTH nested nodes. */ + +#define FDT_ERR_MAX 15 /**********************************************************************/ /* Low-level functions (you probably don't need these) */ @@ -915,7 +920,7 @@ int fdt_get_string_index(const void *fdt, int node, const char *property, int index, const char **output); /** - * fdt_get_string() - obtain the string at a given index in a string list + * fdt_get_string() - obtain the first string in a string list * @fdt: pointer to the device tree blob * @node: offset of the node * @property: name of the property containing the string list @@ -1646,11 +1651,99 @@ int fdt_del_node(void *fdt, int nodeoffset); const char *fdt_strerror(int errval); +/** + * fdt_remove_unused_strings() - Remove any unused strings from an FDT + * + * This creates a new device tree in @new with unused strings removed. The + * called can then use fdt_pack() to minimise the space consumed. + * + * @old: Old device tree blog + * @new: Place to put new device tree blob, which must be as large as + * @old + * @return + * 0, on success + * -FDT_ERR_BADOFFSET, corrupt device tree + * -FDT_ERR_NOSPACE, out of space, which should not happen unless there + * is something very wrong with the device tree input + */ +int fdt_remove_unused_strings(const void *old, void *new); + struct fdt_region { int offset; int size; }; +/* + * Flags for fdt_find_regions() + * + * Add a region for the string table (always the last region) + */ +#define FDT_REG_ADD_STRING_TAB (1 << 0) + +/* + * Add all supernodes of a matching node/property, useful for creating a + * valid subset tree + */ +#define FDT_REG_SUPERNODES (1 << 1) + +/* Add the FDT_BEGIN_NODE tags of subnodes, including their names */ +#define FDT_REG_DIRECT_SUBNODES (1 << 2) + +/* Add all subnodes of a matching node */ +#define FDT_REG_ALL_SUBNODES (1 << 3) + +/* Add a region for the mem_rsvmap table (always the first region) */ +#define FDT_REG_ADD_MEM_RSVMAP (1 << 4) + +/* Indicates what an fdt part is (node, property, value) */ +#define FDT_IS_NODE (1 << 0) +#define FDT_IS_PROP (1 << 1) +#define FDT_IS_VALUE (1 << 2) /* not supported */ +#define FDT_IS_COMPAT (1 << 3) /* used internally */ +#define FDT_NODE_HAS_PROP (1 << 4) /* node contains prop */ + +#define FDT_ANY_GLOBAL (FDT_IS_NODE | FDT_IS_PROP | FDT_IS_VALUE | \ + FDT_IS_COMPAT) +#define FDT_IS_ANY 0x1f /* all the above */ + +/* We set a reasonable limit on the number of nested nodes */ +#define FDT_MAX_DEPTH 32 + +/* Decribes what we want to include from the current tag */ +enum want_t { + WANT_NOTHING, + WANT_NODES_ONLY, /* No properties */ + WANT_NODES_AND_PROPS, /* Everything for one level */ + WANT_ALL_NODES_AND_PROPS /* Everything for all levels */ +}; + +/* Keeps track of the state at parent nodes */ +struct fdt_subnode_stack { + int offset; /* Offset of node */ + enum want_t want; /* The 'want' value here */ + int included; /* 1 if we included this node, 0 if not */ +}; + +struct fdt_region_ptrs { + int depth; /* Current tree depth */ + int done; /* What we have completed scanning */ + enum want_t want; /* What we are currently including */ + char *end; /* Pointer to end of full node path */ + int nextoffset; /* Next node offset to check */ +}; + +/* The state of our finding algortihm */ +struct fdt_region_state { + struct fdt_subnode_stack stack[FDT_MAX_DEPTH]; /* node stack */ + struct fdt_region *region; /* Contains list of regions found */ + int count; /* Numnber of regions found */ + const void *fdt; /* FDT blob */ + int max_regions; /* Maximum regions to find */ + int can_merge; /* 1 if we can merge with previous region */ + int start; /* Start position of current region */ + struct fdt_region_ptrs ptrs; /* Pointers for what we are up to */ +}; + /** * fdt_find_regions() - find regions in device tree * @@ -1710,4 +1803,165 @@ int fdt_find_regions(const void *fdt, char * const inc[], int inc_count, struct fdt_region region[], int max_regions, char *path, int path_len, int add_string_tab); +/** + * fdt_first_region() - find regions in device tree + * + * Given a nodes and properties to include and properties to exclude, find + * the regions of the device tree which describe those included parts. + * + * The use for this function is twofold. Firstly it provides a convenient + * way of performing a structure-aware grep of the tree. For example it is + * possible to grep for a node and get all the properties associated with + * that node. Trees can be subsetted easily, by specifying the nodes that + * are required, and then writing out the regions returned by this function. + * This is useful for small resource-constrained systems, such as boot + * loaders, which want to use an FDT but do not need to know about all of + * it. + * + * Secondly it makes it easy to hash parts of the tree and detect changes. + * The intent is to get a list of regions which will be invariant provided + * those parts are invariant. For example, if you request a list of regions + * for all nodes but exclude the property "data", then you will get the + * same region contents regardless of any change to "data" properties. + * + * This function can be used to produce a byte-stream to send to a hashing + * function to verify that critical parts of the FDT have not changed. + * Note that semantically null changes in order could still cause false + * hash misses. Such reordering might happen if the tree is regenerated + * from source, and nodes are reordered (the bytes-stream will be emitted + * in a different order and mnay hash functions will detect this). However + * if an existing tree is modified using libfdt functions, such as + * fdt_add_subnode() and fdt_setprop(), then this problem is avoided. + * + * The nodes/properties to include/exclude are defined by a function + * provided by the caller. This function is called for each node and + * property, and must return: + * + * 0 - to exclude this part + * 1 - to include this part + * -1 - for FDT_IS_PROP only: no information is available, so include + * if its containing node is included + * + * The last case is only used to deal with properties. Often a property is + * included if its containing node is included - this is the case where + * -1 is returned.. However if the property is specifically required to be + * included/excluded, then 0 or 1 can be returned. Note that including a + * property when the FDT_REG_SUPERNODES flag is given will force its + * containing node to be included since it is not valid to have a property + * that is not in a node. + * + * Using the information provided, the inclusion of a node can be controlled + * either by a node name or its compatible string, or any other property + * that the function can determine. + * + * As an example, including node "/" means to include the root node and all + * root properties. A flag provides a way of also including supernodes (of + * which there is none for the root node), and another flag includes + * immediate subnodes, so in this case we would get the FDT_BEGIN_NODE and + * FDT_END_NODE of all subnodes of /. + * + * The subnode feature helps in a hashing situation since it prevents the + * root node from changing at all. Any change to non-excluded properties, + * names of subnodes or number of subnodes would be detected. + * + * When used with FITs this provides the ability to hash and sign parts of + * the FIT based on different configurations in the FIT. Then it is + * impossible to change anything about that configuration (include images + * attached to the configuration), but it may be possible to add new + * configurations, new images or new signatures within the existing + * framework. + * + * Adding new properties to a device tree may result in the string table + * being extended (if the new property names are different from those + * already added). This function can optionally include a region for + * the string table so that this can be part of the hash too. This is always + * the last region. + * + * The FDT also has a mem_rsvmap table which can also be included, and is + * always the first region if so. + * + * The device tree header is not included in the region list. Since the + * contents of the FDT are changing (shrinking, often), the caller will need + * to regenerate the header anyway. + * + * @fdt: Device tree to check + * @h_include: Function to call to determine whether to include a part or + * not: + * + * @priv: Private pointer as passed to fdt_find_regions() + * @fdt: Pointer to FDT blob + * @offset: Offset of this node / property + * @type: Type of this part, FDT_IS_... + * @data: Pointer to data (node name, property name, compatible + * string, value (not yet supported) + * @size: Size of data, or 0 if none + * @return 0 to exclude, 1 to include, -1 if no information is + * available + * @priv: Private pointer passed to h_include + * @region: Returns list of regions, sorted by offset + * @max_regions: Maximum length of region list + * @path: Pointer to a temporary string for the function to use for + * building path names + * @path_len: Length of path, must be large enough to hold the longest + * path in the tree + * @flags: Various flags that control the region algortihm, see + * FDT_REG_... + * @return number of regions in list. If this is >max_regions then the + * region array was exhausted. You should increase max_regions and try + * the call again. Only the first max_regions elements are available in the + * array. + * + * On error a -ve value is return, which can be: + * + * -FDT_ERR_BADSTRUCTURE (too deep or more END tags than BEGIN tags + * -FDT_ERR_BADLAYOUT + * -FDT_ERR_NOSPACE (path area is too small) + */ +int fdt_first_region(const void *fdt, + int (*h_include)(void *priv, const void *fdt, int offset, + int type, const char *data, int size), + void *priv, struct fdt_region *region, + char *path, int path_len, int flags, + struct fdt_region_state *info); + +/** fdt_next_region() - find next region + * + * See fdt_first_region() for full description. This function finds the + * next region according to the provided parameters, which must be the same + * as passed to fdt_first_region(). + * + * This function can additionally return -FDT_ERR_NOTFOUND when there are no + * more regions + */ +int fdt_next_region(const void *fdt, + int (*h_include)(void *priv, const void *fdt, int offset, + int type, const char *data, int size), + void *priv, struct fdt_region *region, + char *path, int path_len, int flags, + struct fdt_region_state *info); + +/** + * fdt_add_alias_regions() - find aliases that point to existing regions + * + * Once a device tree grep is complete some of the nodes will be present + * and some will have been dropped. This function checks all the alias nodes + * to figure out which points point to nodes which are still present. These + * aliases need to be kept, along with the nodes they reference. + * + * Given a list of regions function finds the aliases that still apply and + * adds more regions to the list for these. This function is called after + * fdt_next_region() has finished returning regions and requires the same + * state. + * + * @fdt: Device tree file to reference + * @region: List of regions that will be kept + * @count: Number of regions + * @max_regions: Number of entries that can fit in @region + * @info: Region state as returned from fdt_next_region() + * @return new number of regions in @region (i.e. count + the number added) + * or -FDT_ERR_NOSPACE if there was not enough space. + */ +int fdt_add_alias_regions(const void *fdt, struct fdt_region *region, int count, + int max_regions, struct fdt_region_state *info); + #endif /* _LIBFDT_H */ diff --git a/include/linker_lists.h b/include/linker_lists.h index b22d169..76898ab 100644 --- a/include/linker_lists.h +++ b/include/linker_lists.h @@ -83,7 +83,7 @@ * global list name ("outer"); iterators for only a sub-list should use * the full sub-list name ("outer_2_inner"). * - * Here is an example of the sections generated from a global list + * Here is an example of the sections generated from a global list * named "drivers", two sub-lists named "i2c" and "pci", and iterators * defined for the whole list and each sub-list: * @@ -103,7 +103,7 @@ */ /** - * ll_sym() - Access a linker-generated array entry + * llsym() - Access a linker-generated array entry * @_type: Data type of the entry * @_name: Name of the entry * @_list: name of the list. Should contain only characters allowed @@ -142,7 +142,7 @@ * the inner sections are present in the array. * * Example: - * ll_entry_declare(struct my_sub_cmd, my_sub_cmd, cmd_sub, cmd.sub) = { + * ll_entry_declare(struct my_sub_cmd, my_sub_cmd, cmd_sub) = { * .x = 3, * .y = 4, * }; @@ -162,7 +162,7 @@ * This is like ll_entry_declare() but creates multiple entries. It should * be assigned to an array. * - * ll_entry_declare_list(struct my_sub_cmd, my_sub_cmd, cmd_sub, cmd.sub) = { + * ll_entry_declare_list(struct my_sub_cmd, my_sub_cmd, cmd_sub) = { * { .x = 3, .y = 4 }, * { .x = 8, .y = 2 }, * { .x = 1, .y = 7 } @@ -222,7 +222,7 @@ */ #define ll_entry_end(_type, _list) \ ({ \ - static char end[0] __aligned(4) __attribute__((unused, \ + static char end[0] __aligned(4) __attribute__((unused, \ section(".u_boot_list_2_"#_list"_3"))); \ (_type *)&end; \ }) @@ -256,8 +256,8 @@ * @_name: Name of the entry * @_list: Name of the list in which this entry is placed * - * This function returns a pointer to a particular entry in LG-array - * identified by the subsection of u_boot_list where the entry resides + * This function returns a pointer to a particular entry in linker-generated + * array identified by the subsection of u_boot_list where the entry resides * and it's name. * * Example: @@ -272,7 +272,7 @@ ({ \ extern _type _u_boot_list_2_##_list##_2_##_name; \ _type *_ll_result = \ - &_u_boot_list_2_##_list##_2_##_name; \ + &_u_boot_list_2_##_list##_2_##_name; \ _ll_result; \ }) @@ -297,7 +297,7 @@ }) /** - * ll_entry_end() - Point after last entry of last linker-generated array + * ll_end() - Point after last entry of last linker-generated array * @_type: Data type of the entry * * This function returns (_type *) pointer after the very last entry of @@ -311,7 +311,7 @@ */ #define ll_end(_type) \ ({ \ - static char end[0] __aligned(4) __attribute__((unused, \ + static char end[0] __aligned(4) __attribute__((unused, \ section(".u_boot_list_3"))); \ (_type *)&end; \ }) diff --git a/include/linux/compat.h b/include/linux/compat.h index 6ff3915..fbebf91 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -36,10 +36,25 @@ extern struct p_current *current; #define KERN_INFO #define KERN_DEBUG +#define GFP_ATOMIC ((gfp_t) 0) +#define GFP_KERNEL ((gfp_t) 0) +#define GFP_NOFS ((gfp_t) 0) +#define GFP_USER ((gfp_t) 0) +#define __GFP_NOWARN ((gfp_t) 0) +#define __GFP_ZERO ((__force gfp_t)0x8000u) /* Return zeroed page on success */ + void *kmalloc(size_t size, int flags); -void *kzalloc(size_t size, int flags); + +static inline void *kzalloc(size_t size, gfp_t flags) +{ + return kmalloc(size, flags | __GFP_ZERO); +} #define vmalloc(size) kmalloc(size, 0) #define __vmalloc(size, flags, pgsz) kmalloc(size, flags) +static inline void *vzalloc(unsigned long size) +{ + return kzalloc(size, 0); +} #define kfree(ptr) free(ptr) #define vfree(ptr) free(ptr) @@ -73,13 +88,6 @@ void *kmem_cache_alloc(struct kmem_cache *obj, int flag); /* drivers/char/random.c */ #define get_random_bytes(...) -/* idr.c */ -#define GFP_ATOMIC ((gfp_t) 0) -#define GFP_KERNEL ((gfp_t) 0) -#define GFP_NOFS ((gfp_t) 0) -#define GFP_USER ((gfp_t) 0) -#define __GFP_NOWARN ((gfp_t) 0) - /* include/linux/leds.h */ struct led_trigger {}; @@ -189,8 +197,6 @@ struct work_struct {}; unsigned long copy_from_user(void *dest, const void *src, unsigned long count); -void *vzalloc(unsigned long size); - typedef unused_t spinlock_t; typedef int wait_queue_head_t; @@ -315,8 +321,6 @@ struct notifier_block {}; typedef unsigned long dmaaddr_t; -#define cpu_relax() do {} while (0) - #define pm_runtime_get_sync(dev) do {} while (0) #define pm_runtime_put(dev) do {} while (0) #define pm_runtime_put_sync(dev) do {} while (0) diff --git a/include/linux/usb/dwc3.h b/include/linux/usb/dwc3.h index 7edc760..dd934a0 100644 --- a/include/linux/usb/dwc3.h +++ b/include/linux/usb/dwc3.h @@ -109,7 +109,11 @@ struct dwc3 { /* offset: 0xC100 */ u32 g_hwparams8; - u32 reserved4[63]; + u32 reserved4[11]; + + u32 g_fladj; + + u32 reserved5[51]; u32 d_cfg; u32 d_ctl; @@ -118,15 +122,15 @@ struct dwc3 { /* offset: 0xC100 */ u32 d_gcmdpar; u32 d_gcmd; - u32 reserved5[2]; + u32 reserved6[2]; u32 d_alepena; - u32 reserved6[55]; + u32 reserved7[55]; struct d_physical_endpoint d_phy_ep_cmd[32]; - u32 reserved7[128]; + u32 reserved8[128]; u32 o_cfg; u32 o_ctl; @@ -134,7 +138,7 @@ struct dwc3 { /* offset: 0xC100 */ u32 o_evten; u32 o_sts; - u32 reserved8[3]; + u32 reserved9[3]; u32 adp_cfg; u32 adp_ctl; @@ -143,7 +147,7 @@ struct dwc3 { /* offset: 0xC100 */ u32 bc_cfg; - u32 reserved9; + u32 reserved10; u32 bc_evt; u32 bc_evten; @@ -191,4 +195,16 @@ struct dwc3 { /* offset: 0xC100 */ #define DWC3_DCTL_CSFTRST (1 << 30) #define DWC3_DCTL_LSFTRST (1 << 29) +/* Global Frame Length Adjustment Register */ +#define GFLADJ_30MHZ_REG_SEL (1 << 7) +#define GFLADJ_30MHZ(n) ((n) & 0x3f) +#define GFLADJ_30MHZ_DEFAULT 0x20 + +#ifdef CONFIG_USB_XHCI_DWC3 +void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode); +void dwc3_core_soft_reset(struct dwc3 *dwc3_reg); +int dwc3_core_init(struct dwc3 *dwc3_reg); +void usb_phy_reset(struct dwc3 *dwc3_reg); +void dwc3_set_fladj(struct dwc3 *dwc3_reg, u32 val); +#endif #endif /* __DWC3_H_ */ diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h new file mode 100644 index 0000000..602a413 --- /dev/null +++ b/include/linux/usb/xhci-fsl.h @@ -0,0 +1,64 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * FSL USB HOST xHCI Controller + * + * Author: Ramneek Mehresh<ramneek.mehresh@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARCH_XHCI_FSL_H_ +#define _ASM_ARCH_XHCI_FSL_H_ + +/* Default to the FSL XHCI defines */ +#define USB3_PWRCTL_CLK_CMD_MASK 0x3FE000 +#define USB3_PWRCTL_CLK_FREQ_MASK 0xFFC +#define USB3_PHY_PARTIAL_RX_POWERON BIT(6) +#define USB3_PHY_RX_POWERON BIT(14) +#define USB3_PHY_TX_POWERON BIT(15) +#define USB3_PHY_TX_RX_POWERON (USB3_PHY_RX_POWERON | USB3_PHY_TX_POWERON) +#define USB3_PWRCTL_CLK_CMD_SHIFT 14 +#define USB3_PWRCTL_CLK_FREQ_SHIFT 22 + +/* USBOTGSS_WRAPPER definitions */ +#define USBOTGSS_WRAPRESET BIT(17) +#define USBOTGSS_DMADISABLE BIT(16) +#define USBOTGSS_STANDBYMODE_NO_STANDBY BIT(4) +#define USBOTGSS_STANDBYMODE_SMRT BIT(5) +#define USBOTGSS_STANDBYMODE_SMRT_WKUP (0x3 << 4) +#define USBOTGSS_IDLEMODE_NOIDLE BIT(2) +#define USBOTGSS_IDLEMODE_SMRT BIT(3) +#define USBOTGSS_IDLEMODE_SMRT_WKUP (0x3 << 2) + +/* USBOTGSS_IRQENABLE_SET_0 bit */ +#define USBOTGSS_COREIRQ_EN BIT(1) + +/* USBOTGSS_IRQENABLE_SET_1 bits */ +#define USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN BIT(1) +#define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN BIT(3) +#define USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN BIT(4) +#define USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN BIT(5) +#define USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN BIT(8) +#define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN BIT(11) +#define USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN BIT(12) +#define USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN BIT(13) +#define USBOTGSS_IRQ_SET_1_OEVT_EN BIT(16) +#define USBOTGSS_IRQ_SET_1_DMADISABLECLR_EN BIT(17) + +struct fsl_xhci { + struct xhci_hccr *hcd; + struct dwc3 *dwc3_reg; +}; + +#if defined(CONFIG_LS102XA) +#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS102XA_XHCI_USB1_ADDR +#define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0 +#elif defined(CONFIG_LS2085A) +#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2085A_XHCI_USB1_ADDR +#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2085A_XHCI_USB2_ADDR +#endif + +#define FSL_USB_XHCI_ADDR {CONFIG_SYS_FSL_XHCI_USB1_ADDR, \ + CONFIG_SYS_FSL_XHCI_USB2_ADDR} +#endif /* _ASM_ARCH_XHCI_FSL_H_ */ diff --git a/include/mmc.h b/include/mmc.h index dd98b3b..cda9a19 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -266,6 +266,28 @@ #define MMC_NUM_BOOT_PARTITION 2 #define MMC_PART_RPMB 3 /* RPMB partition number */ +/* Driver model support */ + +/** + * struct mmc_uclass_priv - Holds information about a device used by the uclass + */ +struct mmc_uclass_priv { + struct mmc *mmc; +}; + +/** + * mmc_get_mmc_dev() - get the MMC struct pointer for a device + * + * Provided that the device is already probed and ready for use, this value + * will be available. + * + * @dev: Device + * @return associated mmc struct pointer if available, else NULL + */ +struct mmc *mmc_get_mmc_dev(struct udevice *dev); + +/* End of driver model support */ + struct mmc_cid { unsigned long psn; unsigned short oid; diff --git a/include/net.h b/include/net.h index d17173d..d09bec9 100644 --- a/include/net.h +++ b/include/net.h @@ -93,6 +93,14 @@ struct eth_pdata { int phy_interface; }; +enum eth_recv_flags { + /* + * Check hardware device for new packets (otherwise only return those + * which are already in the memory buffer ready to process) + */ + ETH_RECV_CHECK_DEVICE = 1 << 0, +}; + /** * struct eth_ops - functions of Ethernet MAC controllers * @@ -111,7 +119,9 @@ struct eth_pdata { * mcast: Join or leave a multicast group (for TFTP) - optional * write_hwaddr: Write a MAC address to the hardware (used to pass it to Linux * on some platforms like ARM). This function expects the - * eth_pdata::enetaddr field to be populated - optional + * eth_pdata::enetaddr field to be populated. The method can + * return -ENOSYS to indicate that this is not implemented for + this hardware - optional. * read_rom_hwaddr: Some devices have a backup of the MAC address stored in a * ROM on the board. This is how the driver should expose it * to the network stack. This function should fill in the @@ -120,7 +130,7 @@ struct eth_pdata { struct eth_ops { int (*start)(struct udevice *dev); int (*send)(struct udevice *dev, void *packet, int length); - int (*recv)(struct udevice *dev, uchar **packetp); + int (*recv)(struct udevice *dev, int flags, uchar **packetp); int (*free_pkt)(struct udevice *dev, uchar *packet, int length); void (*stop)(struct udevice *dev); #ifdef CONFIG_MCAST_TFTP diff --git a/include/pci.h b/include/pci.h index 542e68b..94bca97 100644 --- a/include/pci.h +++ b/include/pci.h @@ -468,7 +468,10 @@ typedef int pci_dev_t; #define PCI_ANY_ID (~0) struct pci_device_id { - unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ + unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ + unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ + unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ + unsigned long driver_data; /* Data private to the driver */ }; struct pci_controller; @@ -805,6 +808,14 @@ struct dm_pci_ops { #define pci_get_ops(dev) ((struct dm_pci_ops *)(dev)->driver->ops) /** + * pci_get_bdf() - Get the BDF value for a device + * + * @dev: Device to check + * @return bus/device/function value (see PCI_BDF()) + */ +pci_dev_t pci_get_bdf(struct udevice *dev); + +/** * pci_bind_bus_devices() - scan a PCI bus and bind devices * * Scan a PCI bus looking for devices. Bind each one that is found. If @@ -1101,7 +1112,79 @@ struct dm_pci_emul_ops { int sandbox_pci_get_emul(struct udevice *bus, pci_dev_t find_devfn, struct udevice **emulp); -#endif +#endif /* CONFIG_DM_PCI */ + +/** + * PCI_DEVICE - macro used to describe a specific pci device + * @vend: the 16 bit PCI Vendor ID + * @dev: the 16 bit PCI Device ID + * + * This macro is used to create a struct pci_device_id that matches a + * specific device. The subvendor and subdevice fields will be set to + * PCI_ANY_ID. + */ +#define PCI_DEVICE(vend, dev) \ + .vendor = (vend), .device = (dev), \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID + +/** + * PCI_DEVICE_SUB - macro used to describe a specific pci device with subsystem + * @vend: the 16 bit PCI Vendor ID + * @dev: the 16 bit PCI Device ID + * @subvend: the 16 bit PCI Subvendor ID + * @subdev: the 16 bit PCI Subdevice ID + * + * This macro is used to create a struct pci_device_id that matches a + * specific device with subsystem information. + */ +#define PCI_DEVICE_SUB(vend, dev, subvend, subdev) \ + .vendor = (vend), .device = (dev), \ + .subvendor = (subvend), .subdevice = (subdev) + +/** + * PCI_DEVICE_CLASS - macro used to describe a specific pci device class + * @dev_class: the class, subclass, prog-if triple for this device + * @dev_class_mask: the class mask for this device + * + * This macro is used to create a struct pci_device_id that matches a + * specific PCI class. The vendor, device, subvendor, and subdevice + * fields will be set to PCI_ANY_ID. + */ +#define PCI_DEVICE_CLASS(dev_class, dev_class_mask) \ + .class = (dev_class), .class_mask = (dev_class_mask), \ + .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID + +/** + * PCI_VDEVICE - macro used to describe a specific pci device in short form + * @vend: the vendor name + * @dev: the 16 bit PCI Device ID + * + * This macro is used to create a struct pci_device_id that matches a + * specific PCI device. The subvendor, and subdevice fields will be set + * to PCI_ANY_ID. The macro allows the next field to follow as the device + * private data. + */ + +#define PCI_VDEVICE(vend, dev) \ + .vendor = PCI_VENDOR_ID_##vend, .device = (dev), \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0 + +/** + * struct pci_driver_entry - Matches a driver to its pci_device_id list + * @driver: Driver to use + * @match: List of match records for this driver, terminated by {} + */ +struct pci_driver_entry { + struct driver *driver; + const struct pci_device_id *match; +}; + +#define U_BOOT_PCI_DEVICE(__name, __match) \ + ll_entry_declare(struct pci_driver_entry, __name, pci_driver_entry) = {\ + .driver = llsym(struct driver, __name, driver), \ + .match = __match, \ + } #endif /* __ASSEMBLY__ */ #endif /* _PCI_H */ diff --git a/include/power/pmic.h b/include/power/pmic.h index eb152ef..6ba4b6e 100644 --- a/include/power/pmic.h +++ b/include/power/pmic.h @@ -264,6 +264,40 @@ int pmic_reg_count(struct udevice *dev); */ int pmic_read(struct udevice *dev, uint reg, uint8_t *buffer, int len); int pmic_write(struct udevice *dev, uint reg, const uint8_t *buffer, int len); + +/** + * pmic_reg_read() - read a PMIC register value + * + * @dev: PMIC device to read + * @reg: Register to read + * @return value read on success or negative value of errno. + */ +int pmic_reg_read(struct udevice *dev, uint reg); + +/** + * pmic_reg_write() - write a PMIC register value + * + * @dev: PMIC device to write + * @reg: Register to write + * @value: Value to write + * @return 0 on success or negative value of errno. + */ +int pmic_reg_write(struct udevice *dev, uint reg, uint value); + +/** + * pmic_clrsetbits() - clear and set bits in a PMIC register + * + * This reads a register, optionally clears some bits, optionally sets some + * bits, then writes the register. + * + * @dev: PMIC device to update + * @reg: Register to update + * @clr: Bit mask to clear (set those bits that you want cleared) + * @set: Bit mask to set (set those bits that you want set) + * @return 0 on success or negative value of errno. + */ +int pmic_clrsetbits(struct udevice *dev, uint reg, uint clr, uint set); + #endif /* CONFIG_DM_PMIC */ #ifdef CONFIG_POWER diff --git a/include/power/regulator.h b/include/power/regulator.h index 03a2cef..0152290 100644 --- a/include/power/regulator.h +++ b/include/power/regulator.h @@ -128,6 +128,11 @@ struct dm_regulator_mode { const char *name; }; +enum regulator_flag { + REGULATOR_FLAG_AUTOSET_UV = 1 << 0, + REGULATOR_FLAG_AUTOSET_UA = 1 << 1, +}; + /** * struct dm_regulator_uclass_platdata - pointed by dev->uclass_platdata, and * allocated on each regulator bind. This structure holds an information @@ -143,6 +148,8 @@ struct dm_regulator_mode { * @max_uA* - maximum amperage (micro Amps) * @always_on* - bool type, true or false * @boot_on* - bool type, true or false + * TODO(sjg@chromium.org): Consider putting the above two into @flags + * @flags: - flags value (see REGULATOR_FLAG_...) * @name** - fdt regulator name - should be taken from the device tree * * Note: @@ -162,6 +169,7 @@ struct dm_regulator_uclass_platdata { bool always_on; bool boot_on; const char *name; + int flags; }; /* Regulator device operations */ @@ -308,9 +316,39 @@ int regulator_get_mode(struct udevice *dev); int regulator_set_mode(struct udevice *dev, int mode_id); /** - * regulator_autoset: setup the regulator given by its uclass's platform data - * name field. The setup depends on constraints found in device's uclass's - * platform data (struct dm_regulator_uclass_platdata): + * regulators_enable_boot_on() - enable regulators needed for boot + * + * This enables all regulators which are marked to be on at boot time. This + * only works for regulators which don't have a range for voltage/current, + * since in that case it is not possible to know which value to use. + * + * This effectively calls regulator_autoset() for every regulator. + */ +int regulators_enable_boot_on(bool verbose); + +/** + * regulator_autoset: setup the voltage/current on a regulator + * + * The setup depends on constraints found in device's uclass's platform data + * (struct dm_regulator_uclass_platdata): + * + * - Enable - will set - if any of: 'always_on' or 'boot_on' is set to true, + * or if both are unset, then the function returns + * - Voltage value - will set - if '.min_uV' and '.max_uV' values are equal + * - Current limit - will set - if '.min_uA' and '.max_uA' values are equal + * + * The function returns on the first-encountered error. + * + * @platname - expected string for dm_regulator_uclass_platdata .name field + * @devp - returned pointer to the regulator device - if non-NULL passed + * @return: 0 on success or negative value of errno. + */ +int regulator_autoset(struct udevice *dev); + +/** + * regulator_autoset_by_name: setup the regulator given by its uclass's + * platform data name field. The setup depends on constraints found in device's + * uclass's platform data (struct dm_regulator_uclass_platdata): * - Enable - will set - if any of: 'always_on' or 'boot_on' is set to true, * or if both are unset, then the function returns * - Voltage value - will set - if '.min_uV' and '.max_uV' values are equal @@ -320,21 +358,18 @@ int regulator_set_mode(struct udevice *dev, int mode_id); * * @platname - expected string for dm_regulator_uclass_platdata .name field * @devp - returned pointer to the regulator device - if non-NULL passed - * @verbose - (true/false) print regulator setup info, or be quiet * @return: 0 on success or negative value of errno. * * The returned 'regulator' device can be used with: * - regulator_get/set_* */ -int regulator_autoset(const char *platname, - struct udevice **devp, - bool verbose); +int regulator_autoset_by_name(const char *platname, struct udevice **devp); /** * regulator_list_autoset: setup the regulators given by list of their uclass's * platform data name field. The setup depends on constraints found in device's * uclass's platform data. The function loops with calls to: - * regulator_autoset() for each name from the list. + * regulator_autoset_by_name() for each name from the list. * * @list_platname - an array of expected strings for .name field of each * regulator's uclass platdata @@ -375,7 +410,7 @@ int regulator_get_by_devname(const char *devname, struct udevice **devp); * Search by name, found in regulator uclass platdata. * * @platname - expected string for uc_pdata->name of regulator uclass platdata - * @devp - returned pointer to the regulator device + * @devp - returns pointer to the regulator device or NULL on error * @return 0 on success or negative value of errno. * * The returned 'regulator' device is probed and can be used with: diff --git a/include/power/sandbox_pmic.h b/include/power/sandbox_pmic.h index ae14292..8547674 100644 --- a/include/power/sandbox_pmic.h +++ b/include/power/sandbox_pmic.h @@ -117,11 +117,11 @@ enum { /* * Expected regulators setup after call of: - * - regulator_autoset() + * - regulator_autoset_by_name() * - regulator_list_autoset() */ -/* BUCK1: for testing regulator_autoset() */ +/* BUCK1: for testing regulator_autoset_by_name() */ #define SANDBOX_BUCK1_AUTOSET_EXPECTED_UV 1200000 #define SANDBOX_BUCK1_AUTOSET_EXPECTED_UA 200000 #define SANDBOX_BUCK1_AUTOSET_EXPECTED_ENABLE true diff --git a/include/ram.h b/include/ram.h new file mode 100644 index 0000000..e2172a8 --- /dev/null +++ b/include/ram.h @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __RAM_H +#define __RAM_H + +struct ram_info { + phys_addr_t base; + size_t size; +}; + +struct ram_ops { + /** + * get_info() - Get basic memory info + * + * @dev: Device to check (UCLASS_RAM) + * @info: Place to put info + * @return 0 if OK, -ve on error + */ + int (*get_info)(struct udevice *dev, struct ram_info *info); +}; + +#define ram_get_ops(dev) ((struct ram_ops *)(dev)->driver->ops) + +/** + * ram_get_info() - Get information about a RAM device + * + * @dev: Device to check (UCLASS_RAM) + * @info: Returns RAM info + * @return 0 if OK, -ve on error + */ +int ram_get_info(struct udevice *dev, struct ram_info *info); + +#endif diff --git a/include/rc4.h b/include/rc4.h new file mode 100644 index 0000000..ea409c2 --- /dev/null +++ b/include/rc4.h @@ -0,0 +1,21 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * (C) Copyright 2008-2014 Rockchip Electronics + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __RC4_H +#define __RC4_H + +/** + * rc4_encode() - encode a buf with the RC4 cipher + * + * @buf: Buffer to encode (it is overwrite in the process + * @len: Length of buffer in bytes + * @key: 16-byte key to use + */ +void rc4_encode(unsigned char *buf, unsigned int len, unsigned char key[16]); + +#endif diff --git a/include/regmap.h b/include/regmap.h new file mode 100644 index 0000000..eccf770 --- /dev/null +++ b/include/regmap.h @@ -0,0 +1,72 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __REGMAP_H +#define __REGMAP_H + +/** + * struct regmap_range - a register map range + * + * @start: Start address + * @size: Size in bytes + */ +struct regmap_range { + ulong start; + ulong size; +}; + +/** + * struct regmap - a way of accessing hardware/bus registers + * + * @base: Base address of register map + * @range_count: Number of ranges available within the map + * @range: Pointer to the list of ranges, allocated if @range_count > 1 + * @base_range: If @range_count is <= 1, @range points here + */ +struct regmap { + phys_addr_t base; + int range_count; + struct regmap_range *range, base_range; +}; + +/* + * Interface to provide access to registers either through a direct memory + * bus or through a peripheral bus like I2C, SPI. + */ +int regmap_write(struct regmap *map, uint offset, uint val); +int regmap_read(struct regmap *map, uint offset, uint *valp); + +#define regmap_write32(map, ptr, member, val) \ + regmap_write(map, (uint32_t *)(ptr)->member - (uint32_t *)(ptr), val) + +#define regmap_read32(map, ptr, member, valp) \ + regmap_read(map, (uint32_t *)(ptr)->member - (uint32_t *)(ptr), valp) + +/** + * regmap_init_mem() - Set up a new register map that uses memory access + * + * Use regmap_uninit() to free it. + * + * @dev: Device that uses this map + * @mapp: Returns allocated map + */ +int regmap_init_mem(struct udevice *dev, struct regmap **mapp); + +/** + * regmap_get_range() - Obtain the base memory address of a regmap range + * + * @map: Regmap to query + * @range_num: Range to look up + */ +void *regmap_get_range(struct regmap *map, unsigned int range_num); + +/** + * regmap_uninit() - free a previously inited regmap + */ +int regmap_uninit(struct regmap *map); + +#endif diff --git a/include/reset.h b/include/reset.h new file mode 100644 index 0000000..383761e --- /dev/null +++ b/include/reset.h @@ -0,0 +1,71 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __RESET_H +#define __RESET_H + +enum reset_t { + RESET_WARM, /* Reset CPU, keep GPIOs active */ + RESET_COLD, /* Reset CPU and GPIOs */ + RESET_POWER, /* Reset PMIC (remove and restore power) */ + + RESET_COUNT, +}; + +struct reset_ops { + /** + * request() - request a reset of the given type + * + * Note that this function may return before the reset takes effect. + * + * @type: Reset type to request + * @return -EINPROGRESS if the reset has been started and + * will complete soon, -EPROTONOSUPPORT if not supported + * by this device, 0 if the reset has already happened + * (in which case this method will not actually return) + */ + int (*request)(struct udevice *dev, enum reset_t type); +}; + +#define reset_get_ops(dev) ((struct reset_ops *)(dev)->driver->ops) + +/** + * reset_request() - request a reset + * + * @type: Reset type to request + * @return 0 if OK, -EPROTONOSUPPORT if not supported by this device + */ +int reset_request(struct udevice *dev, enum reset_t type); + +/** + * reset_walk() - cause a reset + * + * This works through the available reset devices until it finds one that can + * perform a reset. If the provided reset type is not available, the next one + * will be tried. + * + * If this function fails to reset, it will display a message and halt + * + * @type: Reset type to request + * @return -EINPROGRESS if a reset is in progress, -ENOSYS if not available + */ +int reset_walk(enum reset_t type); + +/** + * reset_walk_halt() - try to reset, otherwise halt + * + * This calls reset_walk(). If it returns, indicating that reset is not + * supported, it prints a message and halts. + */ +void reset_walk_halt(enum reset_t type); + +/** + * reset_cpu() - calls reset_walk(RESET_WARM) + */ +void reset_cpu(ulong addr); + +#endif diff --git a/include/spl.h b/include/spl.h index d19940f..8e53426 100644 --- a/include/spl.h +++ b/include/spl.h @@ -81,6 +81,18 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image); int spl_load_image_ext(block_dev_desc_t *block_dev, int partition, const char *filename); int spl_load_image_ext_os(block_dev_desc_t *block_dev, int partition); +/** + * spl_init() - Set up device tree and driver model in SPL if enabled + * + * Call this function in board_init_f() if you want to use device tree and + * driver model early, before board_init_r() is called. This function will + * be called from board_init_r() if not called earlier. + * + * If this is not called, then driver model will be inactive in SPL's + * board_init_f(), and no device tree will be available. + */ +int spl_init(void); + #ifdef CONFIG_SPL_BOARD_INIT void spl_board_init(void); #endif diff --git a/include/syscon.h b/include/syscon.h new file mode 100644 index 0000000..c62ccd6 --- /dev/null +++ b/include/syscon.h @@ -0,0 +1,56 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __SYSCON_H +#define __SYSCON_H + +/** + * struct syscon_uc_info - Information stored by the syscon UCLASS_UCLASS + * + * @regmap: Register map for this controller + */ +struct syscon_uc_info { + struct regmap *regmap; +}; + +/* So far there are no ops so this is a placeholder */ +struct syscon_ops { +}; + +#define syscon_get_ops(dev) ((struct syscon_ops *)(dev)->driver->ops) + +/** + * syscon_get_regmap() - Get access to a register map + * + * @dev: Device to check (UCLASS_SCON) + * @info: Returns regmap for the device + * @return 0 if OK, -ve on error + */ +struct regmap *syscon_get_regmap(struct udevice *dev); + +/** + * syscon_get_regmap_by_driver_data() - Look up a controller by its ID + * + * Each system controller can be accessed by its driver data, which is + * assumed to be unique through the scope of all system controllers that + * are in use. This function looks up the regmap given this driver data. + * + * @driver_data: Driver data value to look up + * @return register map correponding to @driver_data, or -ve error code + */ +struct regmap *syscon_get_regmap_by_driver_data(ulong driver_data); + +/** + * syscon_get_first_range() - get the first memory range from a syscon regmap + * + * @driver_data: Driver data value to look up + * @return first region of register map correponding to @driver_data, or + * -ve error code + */ +void *syscon_get_first_range(ulong driver_data); + +#endif diff --git a/include/test/ut.h b/include/test/ut.h index 5e5aa6c..da7c1a9 100644 --- a/include/test/ut.h +++ b/include/test/ut.h @@ -9,6 +9,8 @@ #ifndef __TEST_UT_H #define __TEST_UT_H +#include <linux/err.h> + struct unit_test_state; /** @@ -101,6 +103,19 @@ void ut_failf(struct unit_test_state *uts, const char *fname, int line, } \ } +/* Assert that a pointer is not an error pointer */ +#define ut_assertok_ptr(expr) { \ + const void *val = (expr); \ + \ + if (IS_ERR(val)) { \ + ut_failf(uts, __FILE__, __LINE__, __func__, \ + #expr " = NULL", \ + "Expected pointer, got error %ld", \ + PTR_ERR(val)); \ + return CMD_RET_FAILURE; \ + } \ +} + /* Assert that an operation succeeds (returns 0) */ #define ut_assertok(cond) ut_asserteq(0, cond) diff --git a/include/usb.h b/include/usb.h index dca512d..cf00ffd 100644 --- a/include/usb.h +++ b/include/usb.h @@ -175,9 +175,9 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller); int usb_lowlevel_stop(int index); #if defined(CONFIG_MUSB_HOST) || defined(CONFIG_DM_USB) -int usb_reset_root_port(void); +int usb_reset_root_port(struct usb_device *dev); #else -#define usb_reset_root_port() +#define usb_reset_root_port(dev) #endif int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, @@ -493,15 +493,31 @@ struct usb_device_id { /** * struct usb_driver_entry - Matches a driver to its usb_device_ids - * @compatible: Compatible string - * @data: Data for this compatible string + * @driver: Driver to use + * @match: List of match records for this driver, terminated by {} */ struct usb_driver_entry { struct driver *driver; const struct usb_device_id *match; }; -#define USB_DEVICE(__name, __match) \ +#define USB_DEVICE_ID_MATCH_DEVICE \ + (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT) + +/** + * USB_DEVICE - macro used to describe a specific usb device + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * + * This macro is used to create a struct usb_device_id that matches a + * specific device. + */ +#define USB_DEVICE(vend, prod) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \ + .idVendor = (vend), \ + .idProduct = (prod) + +#define U_BOOT_USB_DEVICE(__name, __match) \ ll_entry_declare(struct usb_driver_entry, __name, usb_driver_entry) = {\ .driver = llsym(struct driver, __name, driver), \ .match = __match, \ @@ -705,15 +721,16 @@ struct dm_usb_ops { * is read). This should be NULL for EHCI, which does not need this. */ int (*alloc_device)(struct udevice *bus, struct usb_device *udev); + + /** + * reset_root_port() - Reset usb root port + */ + int (*reset_root_port)(struct udevice *bus, struct usb_device *udev); }; #define usb_get_ops(dev) ((struct dm_usb_ops *)(dev)->driver->ops) #define usb_get_emul_ops(dev) ((struct dm_usb_ops *)(dev)->driver->ops) -#ifdef CONFIG_MUSB_HOST -int usb_reset_root_port(void); -#endif - /** * usb_get_dev_index() - look up a device index number * @@ -730,26 +747,18 @@ int usb_reset_root_port(void); struct usb_device *usb_get_dev_index(struct udevice *bus, int index); /** - * usb_legacy_port_reset() - Legacy function to reset a hub port - * - * @hub: Hub device - * @portnr: Port number (1=first) - */ -int usb_legacy_port_reset(struct usb_device *hub, int portnr); - -/** * usb_setup_device() - set up a device ready for use * * @dev: USB device pointer. This need not be a real device - it is * common for it to just be a local variable with its ->dev - * member (i.e. @dev->dev) set to the parent device + * member (i.e. @dev->dev) set to the parent device and + * dev->portnr set to the port number on the hub (1=first) * @do_read: true to read the device descriptor before an address is set * (should be false for XHCI buses, true otherwise) * @parent: Parent device (either UCLASS_USB or UCLASS_USB_HUB) - * @portnr: Port number on hub (1=first) or 0 for none * @return 0 if OK, -ve on error */ int usb_setup_device(struct usb_device *dev, bool do_read, - struct usb_device *parent, int portnr); + struct usb_device *parent); /** * usb_hub_scan() - Scan a hub and find its devices diff --git a/include/usb_ether.h b/include/usb_ether.h index 23507e1..c6d1416 100644 --- a/include/usb_ether.h +++ b/include/usb_ether.h @@ -19,25 +19,91 @@ #define ETH_DATA_LEN 1500 /* Max. octets in payload */ #define ETH_FRAME_LEN PKTSIZE_ALIGN /* Max. octets in frame sans FCS */ +/* TODO(sjg@chromium.org): Remove @pusb_dev when all boards use CONFIG_DM_ETH */ struct ueth_data { /* eth info */ - struct eth_device eth_dev; /* used with eth_register */ - int phy_id; /* mii phy id */ +#ifdef CONFIG_DM_ETH + uint8_t *rxbuf; + int rxsize; + int rxlen; /* Total bytes available in rxbuf */ + int rxptr; /* Current position in rxbuf */ +#else + struct eth_device eth_dev; /* used with eth_register */ + /* driver private */ + void *dev_priv; +#endif + int phy_id; /* mii phy id */ /* usb info */ struct usb_device *pusb_dev; /* this usb_device */ - unsigned char ifnum; /* interface number */ - unsigned char ep_in; /* in endpoint */ - unsigned char ep_out; /* out ....... */ - unsigned char ep_int; /* interrupt . */ - unsigned char subclass; /* as in overview */ - unsigned char protocol; /* .............. */ + unsigned char ifnum; /* interface number */ + unsigned char ep_in; /* in endpoint */ + unsigned char ep_out; /* out ....... */ + unsigned char ep_int; /* interrupt . */ + unsigned char subclass; /* as in overview */ + unsigned char protocol; /* .............. */ unsigned char irqinterval; /* Intervall for IRQ Pipe */ - - /* driver private */ - void *dev_priv; }; +#ifdef CONFIG_DM_ETH +/** + * usb_ether_register() - register a new USB ethernet device + * + * This selects the correct USB interface and figures out the endpoints to use. + * + * @dev: USB device + * @ss: Place to put USB ethernet data + * @rxsize: Maximum size to allocate for the receive buffer + * @return 0 if OK, -ve on error + */ +int usb_ether_register(struct udevice *dev, struct ueth_data *ueth, int rxsize); + +/** + * usb_ether_deregister() - deregister a USB ethernet device + * + * @ueth: USB Ethernet device + * @return 0 + */ +int usb_ether_deregister(struct ueth_data *ueth); + +/** + * usb_ether_receive() - recieve a packet from the bulk in endpoint + * + * The packet is stored in the internal buffer ready for processing. + * + * @ueth: USB Ethernet device + * @rxsize: Maximum size to receive + * @return 0 if a packet was received, -EAGAIN if not, -ENOSPC if @rxsize is + * larger than the size passed ot usb_ether_register(), other -ve on error + */ +int usb_ether_receive(struct ueth_data *ueth, int rxsize); + +/** + * usb_ether_get_rx_bytes() - obtain bytes from the internal packet buffer + * + * This should be called repeatedly to obtain packet data until it returns 0. + * After each packet is processed, call usb_ether_advance_rxbuf() to move to + * the next one. + * + * @ueth: USB Ethernet device + * @ptrp: Returns a pointer to the start of the next packet if there is + * one available + * @return number of bytes available, or 0 if none + */ +int usb_ether_get_rx_bytes(struct ueth_data *ueth, uint8_t **ptrp); + +/** + * usb_ether_advance_rxbuf() - Advance to the next packet in the internal buffer + * + * After processing the data returned by usb_ether_get_rx_bytes(), call this + * function to move to the next packet. You must specify the number of bytes + * you have processed in @num_bytes. + * + * @ueth: USB Ethernet device + * @num_bytes: Number of bytes to skip, or -1 to skip all bytes + */ +void usb_ether_advance_rxbuf(struct ueth_data *ueth, int num_bytes); +#else /* * Function definitions for each USB ethernet driver go here * (declaration is unconditional, compilation is conditional) @@ -65,5 +131,6 @@ int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum, struct ueth_data *ss); int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss, struct eth_device *eth); +#endif #endif /* __USB_ETHER_H__ */ diff --git a/include/vsprintf.h b/include/vsprintf.h index d2fcca3..b5bc9c1 100644 --- a/include/vsprintf.h +++ b/include/vsprintf.h @@ -41,6 +41,32 @@ unsigned long long simple_strtoull(const char *cp, char **endp, long simple_strtol(const char *cp, char **endp, unsigned int base); /** + * trailing_strtol() - extract a trailing integer from a string + * + * Given a string this finds a trailing number on the string and returns it. + * For example, "abc123" would return 123. + * + * @str: String to exxamine + * @return training number if found, else -1 + */ +long trailing_strtol(const char *str); + +/** + * trailing_strtoln() - extract a trailing integer from a fixed-length string + * + * Given a fixed-length string this finds a trailing number on the string + * and returns it. For example, "abc123" would return 123. Only the + * characters between @str and @end - 1 are examined. If @end is NULL, it is + * set to str + strlen(str). + * + * @str: String to exxamine + * @end: Pointer to end of string to examine, or NULL to use the + * whole string + * @return training number if found, else -1 + */ +long trailing_strtoln(const char *str, const char *end); + +/** * panic() - Print a message and reset/hang * * Prints a message on the console(s) and then resets. If CONFIG_PANIC_HANG is diff --git a/lib/Kconfig b/lib/Kconfig index c98d399..972ac17 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -50,6 +50,8 @@ config LIB_RAND help This library provides pseudo-random number generator functions. +source lib/dhry/Kconfig + source lib/rsa/Kconfig menu "Hashing Support" diff --git a/lib/Makefile b/lib/Makefile index 97ed398..fd106b9 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -15,12 +15,15 @@ obj-$(CONFIG_BZIP2) += bzip2/ obj-$(CONFIG_TIZEN) += tizen/ obj-$(CONFIG_OF_LIBFDT) += libfdt/ obj-$(CONFIG_FIT) += libfdt/ +obj-$(CONFIG_FIT) += libfdt/ +obj-$(CONFIG_CMD_DHRYSTONE) += dhry/ obj-$(CONFIG_AES) += aes.o obj-$(CONFIG_USB_TTY) += circbuf.o obj-y += crc7.o obj-y += crc8.o obj-y += crc16.o +obj-$(CONFIG_ERRNO_STR) += errno_str.o obj-$(CONFIG_FIT) += fdtdec_common.o obj-$(CONFIG_OF_CONTROL) += fdtdec_common.o obj-$(CONFIG_OF_CONTROL) += fdtdec.o @@ -34,6 +37,7 @@ obj-$(CONFIG_MD5) += md5.o obj-y += net_utils.o obj-$(CONFIG_PHYSMEM) += physmem.o obj-y += qsort.o +obj-y += rc4.o obj-$(CONFIG_SHA1) += sha1.o obj-$(CONFIG_SUPPORT_EMMC_RPMB) += sha256.o obj-$(CONFIG_SHA256) += sha256.o @@ -57,7 +61,6 @@ endif obj-$(CONFIG_ADDR_MAP) += addr_map.o obj-y += hashtable.o obj-y += errno.o -obj-$(CONFIG_ERRNO_STR) += errno_str.o obj-y += display_options.o obj-$(CONFIG_BCH) += bch.o obj-y += crc32.o diff --git a/lib/dhry/Kconfig b/lib/dhry/Kconfig new file mode 100644 index 0000000..641b806 --- /dev/null +++ b/lib/dhry/Kconfig @@ -0,0 +1,7 @@ +config CMD_DHRYSTONE + bool "Support the 'dhry' command to run the dhrystone benchmark" + help + Dhrystone is an old benchmark in the public domain that gives a + rough idea of CPU performance. This enables a 'dhry' command + which runs this benchmark within U-Boot and reports the performance. + The number of 'Dhrystone MIPS' is also reported. diff --git a/lib/dhry/Makefile b/lib/dhry/Makefile new file mode 100644 index 0000000..926c0d6 --- /dev/null +++ b/lib/dhry/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (c) 2015 Google, Inc +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += cmd_dhry.o dhry_1.o dhry_2.o diff --git a/lib/dhry/cmd_dhry.c b/lib/dhry/cmd_dhry.c new file mode 100644 index 0000000..5dc191e --- /dev/null +++ b/lib/dhry/cmd_dhry.c @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include "dhry.h" + +static int do_dhry(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + ulong start, duration, dhry_per_sec, vax_mips; + int iterations = 1000000; + + if (argc > 1) + iterations = simple_strtoul(argv[1], NULL, 10); + + start = get_timer(0); + dhry(iterations); + duration = get_timer(start); + dhry_per_sec = iterations * 1000 / duration; + vax_mips = dhry_per_sec / 1757; + printf("%d iterations in %lu ms: %lu/s, %lu DMIPS\n", iterations, + duration, dhry_per_sec, vax_mips); + + return 0; +} + +U_BOOT_CMD( + dhry, 2, 1, do_dhry, + "[iterations] - run dhrystone benchmark", + "\n - run the Dhrystone 2.1 benchmark, a rough measure of CPU speed\n" +); diff --git a/lib/dhry/dhry.h b/lib/dhry/dhry.h new file mode 100644 index 0000000..49d4223 --- /dev/null +++ b/lib/dhry/dhry.h @@ -0,0 +1,442 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Dhrystone is widely available in the public domain. A GPL license is + * chosen for U-Boot. + */ + +/***************************************************************************** + * The BYTE UNIX Benchmarks - Release 3 + * Module: dhry.h SID: 3.4 5/15/91 19:30:21 + * + ***************************************************************************** + * Bug reports, patches, comments, suggestions should be sent to: + * + * Ben Smith, Rick Grehan or Tom Yager + * ben@bytepb.byte.com rick_g@bytepb.byte.com tyager@bytepb.byte.com + * + ***************************************************************************** + * Modification Log: + * addapted from: + * + * + * "DHRYSTONE" Benchmark Program + * ----------------------------- + * + * Version: C, Version 2.1 + * + * File: dhry.h (part 1 of 3) + * + * Date: May 25, 1988 + * + * Author: Reinhold P. Weicker + * Siemens AG, AUT E 51 + * Postfach 3220 + * 8520 Erlangen + * Germany (West) + * Phone: [+49]-9131-7-20330 + * (8-17 Central European Time) + * Usenet: ..!mcvax!unido!estevax!weicker + * + * Original Version (in Ada) published in + * "Communications of the ACM" vol. 27., no. 10 (Oct. 1984), + * pp. 1013 - 1030, together with the statistics + * on which the distribution of statements etc. is based. + * + * In this C version, the following C library functions are used: + * - strcpy, strcmp (inside the measurement loop) + * - printf, scanf (outside the measurement loop) + * In addition, Berkeley UNIX system calls "times ()" or "time ()" + * are used for execution time measurement. For measurements + * on other systems, these calls have to be changed. + * + * Collection of Results: + * Reinhold Weicker (address see above) and + * + * Rick Richardson + * PC Research. Inc. + * 94 Apple Orchard Drive + * Tinton Falls, NJ 07724 + * Phone: (201) 834-1378 (9-17 EST) + * Usenet: ...!seismo!uunet!pcrat!rick + * + * Please send results to Rick Richardson and/or Reinhold Weicker. + * Complete information should be given on hardware and software used. + * Hardware information includes: Machine type, CPU, type and size + * of caches; for microprocessors: clock frequency, memory speed + * (number of wait states). + * Software information includes: Compiler (and runtime library) + * manufacturer and version, compilation switches, OS version. + * The Operating System version may give an indication about the + * compiler; Dhrystone itself performs no OS calls in the measurement loop. + * + * The complete output generated by the program should be mailed + * such that at least some checks for correctness can be made. + * + *************************************************************************** + * + * History: This version C/2.1 has been made for two reasons: + * + * 1) There is an obvious need for a common C version of + * Dhrystone, since C is at present the most popular system + * programming language for the class of processors + * (microcomputers, minicomputers) where Dhrystone is used most. + * There should be, as far as possible, only one C version of + * Dhrystone such that results can be compared without + * restrictions. In the past, the C versions distributed + * by Rick Richardson (Version 1.1) and by Reinhold Weicker + * had small (though not significant) differences. + * + * 2) As far as it is possible without changes to the Dhrystone + * statistics, optimizing compilers should be prevented from + * removing significant statements. + * + * This C version has been developed in cooperation with + * Rick Richardson (Tinton Falls, NJ), it incorporates many + * ideas from the "Version 1.1" distributed previously by + * him over the UNIX network Usenet. + * I also thank Chaim Benedelac (National Semiconductor), + * David Ditzel (SUN), Earl Killian and John Mashey (MIPS), + * Alan Smith and Rafael Saavedra-Barrera (UC at Berkeley) + * for their help with comments on earlier versions of the + * benchmark. + * + * Changes: In the initialization part, this version follows mostly + * Rick Richardson's version distributed via Usenet, not the + * version distributed earlier via floppy disk by Reinhold Weicker. + * As a concession to older compilers, names have been made + * unique within the first 8 characters. + * Inside the measurement loop, this version follows the + * version previously distributed by Reinhold Weicker. + * + * At several places in the benchmark, code has been added, + * but within the measurement loop only in branches that + * are not executed. The intention is that optimizing compilers + * should be prevented from moving code out of the measurement + * loop, or from removing code altogether. Since the statements + * that are executed within the measurement loop have NOT been + * changed, the numbers defining the "Dhrystone distribution" + * (distribution of statements, operand types and locality) + * still hold. Except for sophisticated optimizing compilers, + * execution times for this version should be the same as + * for previous versions. + * + * Since it has proven difficult to subtract the time for the + * measurement loop overhead in a correct way, the loop check + * has been made a part of the benchmark. This does have + * an impact - though a very minor one - on the distribution + * statistics which have been updated for this version. + * + * All changes within the measurement loop are described + * and discussed in the companion paper "Rationale for + * Dhrystone version 2". + * + * Because of the self-imposed limitation that the order and + * distribution of the executed statements should not be + * changed, there are still cases where optimizing compilers + * may not generate code for some statements. To a certain + * degree, this is unavoidable for small synthetic benchmarks. + * Users of the benchmark are advised to check code listings + * whether code is generated for all statements of Dhrystone. + * + * Version 2.1 is identical to version 2.0 distributed via + * the UNIX network Usenet in March 1988 except that it corrects + * some minor deficiencies that were found by users of version 2.0. + * The only change within the measurement loop is that a + * non-executed "else" part was added to the "if" statement in + * Func_3, and a non-executed "else" part removed from Proc_3. + * + *************************************************************************** + * + * Defines: The following "Defines" are possible: + * -DREG=register (default: Not defined) + * As an approximation to what an average C programmer + * might do, the "register" storage class is applied + * (if enabled by -DREG=register) + * - for local variables, if they are used (dynamically) + * five or more times + * - for parameters if they are used (dynamically) + * six or more times + * Note that an optimal "register" strategy is + * compiler-dependent, and that "register" declarations + * do not necessarily lead to faster execution. + * -DNOSTRUCTASSIGN (default: Not defined) + * Define if the C compiler does not support + * assignment of structures. + * -DNOENUMS (default: Not defined) + * Define if the C compiler does not support + * enumeration types. + * -DTIMES (default) + * -DTIME + * The "times" function of UNIX (returning process times) + * or the "time" function (returning wallclock time) + * is used for measurement. + * For single user machines, "time ()" is adequate. For + * multi-user machines where you cannot get single-user + * access, use the "times ()" function. If you have + * neither, use a stopwatch in the dead of night. + * "printf"s are provided marking the points "Start Timer" + * and "Stop Timer". DO NOT use the UNIX "time(1)" + * command, as this will measure the total time to + * run this program, which will (erroneously) include + * the time to allocate storage (malloc) and to perform + * the initialization. + * -DHZ=nnn + * In Berkeley UNIX, the function "times" returns process + * time in 1/HZ seconds, with HZ = 60 for most systems. + * CHECK YOUR SYSTEM DESCRIPTION BEFORE YOU JUST APPLY + * A VALUE. + * + *************************************************************************** + * + * Compilation model and measurement (IMPORTANT): + * + * This C version of Dhrystone consists of three files: + * - dhry.h (this file, containing global definitions and comments) + * - dhry_1.c (containing the code corresponding to Ada package Pack_1) + * - dhry_2.c (containing the code corresponding to Ada package Pack_2) + * + * The following "ground rules" apply for measurements: + * - Separate compilation + * - No procedure merging + * - Otherwise, compiler optimizations are allowed but should be indicated + * - Default results are those without register declarations + * See the companion paper "Rationale for Dhrystone Version 2" for a more + * detailed discussion of these ground rules. + * + * For 16-Bit processors (e.g. 80186, 80286), times for all compilation + * models ("small", "medium", "large" etc.) should be given if possible, + * together with a definition of these models for the compiler system used. + * + ************************************************************************** + * + * Dhrystone (C version) statistics: + * + * [Comment from the first distribution, updated for version 2. + * Note that because of language differences, the numbers are slightly + * different from the Ada version.] + * + * The following program contains statements of a high level programming + * language (here: C) in a distribution considered representative: + * + * assignments 52 (51.0 %) + * control statements 33 (32.4 %) + * procedure, function calls 17 (16.7 %) + * + * 103 statements are dynamically executed. The program is balanced with + * respect to the three aspects: + * + * - statement type + * - operand type + * - operand locality + * operand global, local, parameter, or constant. + * + * The combination of these three aspects is balanced only approximately. + * + * 1. Statement Type: + * ----------------- number + * + * V1 = V2 9 + * (incl. V1 = F(..) + * V = Constant 12 + * Assignment, 7 + * with array element + * Assignment, 6 + * with record component + * -- + * 34 34 + * + * X = Y +|-|"&&"|"|" Z 5 + * X = Y +|-|"==" Constant 6 + * X = X +|- 1 3 + * X = Y *|/ Z 2 + * X = Expression, 1 + * two operators + * X = Expression, 1 + * three operators + * -- + * 18 18 + * + * if .... 14 + * with "else" 7 + * without "else" 7 + * executed 3 + * not executed 4 + * for ... 7 | counted every time + * while ... 4 | the loop condition + * do ... while 1 | is evaluated + * switch ... 1 + * break 1 + * declaration with 1 + * initialization + * -- + * 34 34 + * + * P (...) procedure call 11 + * user procedure 10 + * library procedure 1 + * X = F (...) + * function call 6 + * user function 5 + * library function 1 + * -- + * 17 17 + * --- + * 103 + * + * The average number of parameters in procedure or function calls + * is 1.82 (not counting the function values as implicit parameters). + * + * + * 2. Operators + * ------------ + * number approximate + * percentage + * + * Arithmetic 32 50.8 + * + * + 21 33.3 + * - 7 11.1 + * * 3 4.8 + * / (int div) 1 1.6 + * + * Comparison 27 42.8 + * + * == 9 14.3 + * /= 4 6.3 + * > 1 1.6 + * < 3 4.8 + * >= 1 1.6 + * <= 9 14.3 + * + * Logic 4 6.3 + * + * && (AND-THEN) 1 1.6 + * | (OR) 1 1.6 + * ! (NOT) 2 3.2 + * + * -- ----- + * 63 100.1 + * + * + * 3. Operand Type (counted once per operand reference): + * --------------- + * number approximate + * percentage + * + * Integer 175 72.3 % + * Character 45 18.6 % + * Pointer 12 5.0 % + * String30 6 2.5 % + * Array 2 0.8 % + * Record 2 0.8 % + * --- ------- + * 242 100.0 % + * + * When there is an access path leading to the final operand (e.g. a record + * component), only the final data type on the access path is counted. + * + * + * 4. Operand Locality: + * ------------------- + * number approximate + * percentage + * + * local variable 114 47.1 % + * global variable 22 9.1 % + * parameter 45 18.6 % + * value 23 9.5 % + * reference 22 9.1 % + * function result 6 2.5 % + * constant 55 22.7 % + * --- ------- + * 242 100.0 % + * + * + * The program does not compute anything meaningful, but it is syntactically + * and semantically correct. All variables have a value assigned to them + * before they are used as a source operand. + * + * There has been no explicit effort to account for the effects of a + * cache, or to balance the use of long or short displacements for code or + * data. + * + *************************************************************************** + */ + + +/* Compiler and system dependent definitions: */ + +#ifndef TIME +#define TIMES +#endif + /* Use times(2) time function unless */ + /* explicitly defined otherwise */ + +#define Mic_secs_Per_Second 1000000.0 + /* Berkeley UNIX C returns process times in seconds/HZ */ + +#ifdef NOSTRUCTASSIGN +#define structassign(d, s) memcpy(&(d), &(s), sizeof(d)) +#else +#define structassign(d, s) d = s +#endif + +#ifdef NOENUM +#define Ident_1 0 +#define Ident_2 1 +#define Ident_3 2 +#define Ident_4 3 +#define Ident_5 4 + typedef int Enumeration; +#else + typedef enum {Ident_1, Ident_2, Ident_3, Ident_4, Ident_5} + Enumeration; +#endif + /* for boolean and enumeration types in Ada, Pascal */ + +/* General definitions: */ + +#define Null 0 + /* Value of a Null pointer */ +#define true 1 +#define false 0 + +typedef int One_Thirty; +typedef int One_Fifty; +typedef char Capital_Letter; +typedef int Boolean; +typedef char Str_30 [31]; +typedef int Arr_1_Dim [50]; +typedef int Arr_2_Dim [50] [50]; + +typedef struct record + { + struct record *Ptr_Comp; + Enumeration Discr; + union { + struct { + Enumeration Enum_Comp; + int Int_Comp; + char Str_Comp [31]; + } var_1; + struct { + Enumeration E_Comp_2; + char Str_2_Comp [31]; + } var_2; + struct { + char Ch_1_Comp; + char Ch_2_Comp; + } var_3; + } variant; + } Rec_Type, *Rec_Pointer; + + +/* + * dhry() - run dhrystone for a given number of iterations + * + * @iterations: Number of iterations to run + */ +void dhry(int iterations); diff --git a/lib/dhry/dhry_1.c b/lib/dhry/dhry_1.c new file mode 100644 index 0000000..be63710 --- /dev/null +++ b/lib/dhry/dhry_1.c @@ -0,0 +1,421 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Dhrystone is widely available in the public domain. A GPL license is + * chosen for U-Boot. + */ + +/***************************************************************************** + * The BYTE UNIX Benchmarks - Release 3 + * Module: dhry_1.c SID: 3.4 5/15/91 19:30:21 + * + ***************************************************************************** + * Bug reports, patches, comments, suggestions should be sent to: + * + * Ben Smith, Rick Grehan or Tom Yager + * ben@bytepb.byte.com rick_g@bytepb.byte.com tyager@bytepb.byte.com + * + ***************************************************************************** + * + * *** WARNING **** With BYTE's modifications applied, results obtained with + * ******* this version of the Dhrystone program may not be applicable + * to other versions. + * + * Modification Log: + * 10/22/97 - code cleanup to remove ANSI C compiler warnings + * Andy Kahn <kahn@zk3.dec.com> + * + * Adapted from: + * + * "DHRYSTONE" Benchmark Program + * ----------------------------- + * + * Version: C, Version 2.1 + * + * File: dhry_1.c (part 2 of 3) + * + * Date: May 25, 1988 + * + * Author: Reinhold P. Weicker + * + ***************************************************************************/ +char SCCSid[] = "@(#) @(#)dhry_1.c:3.4 -- 5/15/91 19:30:21"; + +#include <common.h> +#include <malloc.h> + +#include "dhry.h" + +unsigned long Run_Index; + +void report(void) +{ + printf("%ld loops\n", Run_Index); +} + +/* Global Variables: */ + +Rec_Pointer Ptr_Glob, + Next_Ptr_Glob; +int Int_Glob; +Boolean Bool_Glob; +char Ch_1_Glob, + Ch_2_Glob; +int Arr_1_Glob [50]; +int Arr_2_Glob [50] [50]; + +Enumeration Func_1 (Capital_Letter Ch_1_Par_Val, Capital_Letter Ch_2_Par_Val); + /* forward declaration necessary since Enumeration may not simply be int */ + +#ifndef REG + Boolean Reg = false; +#define REG + /* REG becomes defined as empty */ + /* i.e. no register variables */ +#else + Boolean Reg = true; +#endif + +/* variables for time measurement: */ + +#ifdef TIMES +#define Too_Small_Time 120 + /* Measurements should last at least about 2 seconds */ +#endif +#ifdef TIME +extern long time(); + /* see library function "time" */ +#define Too_Small_Time 2 + /* Measurements should last at least 2 seconds */ +#endif + +long Begin_Time, + End_Time, + User_Time; + +/* end of variables for time measurement */ + +void Proc_1 (REG Rec_Pointer Ptr_Val_Par); +void Proc_2 (One_Fifty *Int_Par_Ref); +void Proc_3 (Rec_Pointer *Ptr_Ref_Par); +void Proc_4 (void); +void Proc_5 (void); + + +extern Boolean Func_2(Str_30, Str_30); +extern void Proc_6(Enumeration, Enumeration *); +extern void Proc_7(One_Fifty, One_Fifty, One_Fifty *); +extern void Proc_8(Arr_1_Dim, Arr_2_Dim, int, int); + +void dhry(int Number_Of_Runs) + /* main program, corresponds to procedures */ + /* Main and Proc_0 in the Ada version */ +{ + One_Fifty Int_1_Loc; + REG One_Fifty Int_2_Loc; + One_Fifty Int_3_Loc; + REG char Ch_Index; + Enumeration Enum_Loc; + Str_30 Str_1_Loc; + Str_30 Str_2_Loc; + + /* Initializations */ + + Next_Ptr_Glob = (Rec_Pointer) malloc (sizeof (Rec_Type)); + Ptr_Glob = (Rec_Pointer) malloc (sizeof (Rec_Type)); + + Ptr_Glob->Ptr_Comp = Next_Ptr_Glob; + Ptr_Glob->Discr = Ident_1; + Ptr_Glob->variant.var_1.Enum_Comp = Ident_3; + Ptr_Glob->variant.var_1.Int_Comp = 40; + strcpy (Ptr_Glob->variant.var_1.Str_Comp, + "DHRYSTONE PROGRAM, SOME STRING"); + strcpy (Str_1_Loc, "DHRYSTONE PROGRAM, 1'ST STRING"); + + Arr_2_Glob [8][7] = 10; + /* Was missing in published program. Without this statement, */ + /* Arr_2_Glob [8][7] would have an undefined value. */ + /* Warning: With 16-Bit processors and Number_Of_Runs > 32000, */ + /* overflow may occur for this array element. */ + +#ifdef PRATTLE + printf ("\n"); + printf ("Dhrystone Benchmark, Version 2.1 (Language: C)\n"); + printf ("\n"); + if (Reg) + { + printf ("Program compiled with 'register' attribute\n"); + printf ("\n"); + } + else + { + printf ("Program compiled without 'register' attribute\n"); + printf ("\n"); + } + printf ("Please give the number of runs through the benchmark: "); + { + int n; + scanf ("%d", &n); + Number_Of_Runs = n; + } + printf ("\n"); + + printf ("Execution starts, %d runs through Dhrystone\n", Number_Of_Runs); +#endif /* PRATTLE */ + + Run_Index = 0; + + /***************/ + /* Start timer */ + /***************/ + +#ifdef SELF_TIMED +#ifdef TIMES + times (&time_info); + Begin_Time = (long) time_info.tms_utime; +#endif +#ifdef TIME + Begin_Time = time ( (long *) 0); +#endif +#endif /* SELF_TIMED */ + + for (Run_Index = 1; Run_Index < Number_Of_Runs; ++Run_Index) + { + + Proc_5(); + Proc_4(); + /* Ch_1_Glob == 'A', Ch_2_Glob == 'B', Bool_Glob == true */ + Int_1_Loc = 2; + Int_2_Loc = 3; + strcpy (Str_2_Loc, "DHRYSTONE PROGRAM, 2'ND STRING"); + Enum_Loc = Ident_2; + Bool_Glob = ! Func_2 (Str_1_Loc, Str_2_Loc); + /* Bool_Glob == 1 */ + while (Int_1_Loc < Int_2_Loc) /* loop body executed once */ + { + Int_3_Loc = 5 * Int_1_Loc - Int_2_Loc; + /* Int_3_Loc == 7 */ + Proc_7 (Int_1_Loc, Int_2_Loc, &Int_3_Loc); + /* Int_3_Loc == 7 */ + Int_1_Loc += 1; + } /* while */ + /* Int_1_Loc == 3, Int_2_Loc == 3, Int_3_Loc == 7 */ + Proc_8 (Arr_1_Glob, Arr_2_Glob, Int_1_Loc, Int_3_Loc); + /* Int_Glob == 5 */ + Proc_1 (Ptr_Glob); + for (Ch_Index = 'A'; Ch_Index <= Ch_2_Glob; ++Ch_Index) + /* loop body executed twice */ + { + if (Enum_Loc == Func_1 (Ch_Index, 'C')) + /* then, not executed */ + { + Proc_6 (Ident_1, &Enum_Loc); + strcpy (Str_2_Loc, "DHRYSTONE PROGRAM, 3'RD STRING"); + Int_2_Loc = Run_Index; + Int_Glob = Run_Index; + } + } + /* Int_1_Loc == 3, Int_2_Loc == 3, Int_3_Loc == 7 */ + Int_2_Loc = Int_2_Loc * Int_1_Loc; + Int_1_Loc = Int_2_Loc / Int_3_Loc; + Int_2_Loc = 7 * (Int_2_Loc - Int_3_Loc) - Int_1_Loc; + /* Int_1_Loc == 1, Int_2_Loc == 13, Int_3_Loc == 7 */ + Proc_2 (&Int_1_Loc); + /* Int_1_Loc == 5 */ + + } /* loop "for Run_Index" */ + + /**************/ + /* Stop timer */ + /**************/ +#ifdef SELF_TIMED +#ifdef TIMES + times (&time_info); + End_Time = (long) time_info.tms_utime; +#endif +#ifdef TIME + End_Time = time ( (long *) 0); +#endif +#endif /* SELF_TIMED */ + + /* BYTE version never executes this stuff */ +#ifdef SELF_TIMED + printf ("Execution ends\n"); + printf ("\n"); + printf ("Final values of the variables used in the benchmark:\n"); + printf ("\n"); + printf ("Int_Glob: %d\n", Int_Glob); + printf (" should be: %d\n", 5); + printf ("Bool_Glob: %d\n", Bool_Glob); + printf (" should be: %d\n", 1); + printf ("Ch_1_Glob: %c\n", Ch_1_Glob); + printf (" should be: %c\n", 'A'); + printf ("Ch_2_Glob: %c\n", Ch_2_Glob); + printf (" should be: %c\n", 'B'); + printf ("Arr_1_Glob[8]: %d\n", Arr_1_Glob[8]); + printf (" should be: %d\n", 7); + printf ("Arr_2_Glob[8][7]: %d\n", Arr_2_Glob[8][7]); + printf (" should be: Number_Of_Runs + 10\n"); + printf ("Ptr_Glob->\n"); + printf (" Ptr_Comp: %d\n", (int) Ptr_Glob->Ptr_Comp); + printf (" should be: (implementation-dependent)\n"); + printf (" Discr: %d\n", Ptr_Glob->Discr); + printf (" should be: %d\n", 0); + printf (" Enum_Comp: %d\n", Ptr_Glob->variant.var_1.Enum_Comp); + printf (" should be: %d\n", 2); + printf (" Int_Comp: %d\n", Ptr_Glob->variant.var_1.Int_Comp); + printf (" should be: %d\n", 17); + printf (" Str_Comp: %s\n", Ptr_Glob->variant.var_1.Str_Comp); + printf (" should be: DHRYSTONE PROGRAM, SOME STRING\n"); + printf ("Next_Ptr_Glob->\n"); + printf (" Ptr_Comp: %d\n", (int) Next_Ptr_Glob->Ptr_Comp); + printf (" should be: (implementation-dependent), same as above\n"); + printf (" Discr: %d\n", Next_Ptr_Glob->Discr); + printf (" should be: %d\n", 0); + printf (" Enum_Comp: %d\n", Next_Ptr_Glob->variant.var_1.Enum_Comp); + printf (" should be: %d\n", 1); + printf (" Int_Comp: %d\n", Next_Ptr_Glob->variant.var_1.Int_Comp); + printf (" should be: %d\n", 18); + printf (" Str_Comp: %s\n", + Next_Ptr_Glob->variant.var_1.Str_Comp); + printf (" should be: DHRYSTONE PROGRAM, SOME STRING\n"); + printf ("Int_1_Loc: %d\n", Int_1_Loc); + printf (" should be: %d\n", 5); + printf ("Int_2_Loc: %d\n", Int_2_Loc); + printf (" should be: %d\n", 13); + printf ("Int_3_Loc: %d\n", Int_3_Loc); + printf (" should be: %d\n", 7); + printf ("Enum_Loc: %d\n", Enum_Loc); + printf (" should be: %d\n", 1); + printf ("Str_1_Loc: %s\n", Str_1_Loc); + printf (" should be: DHRYSTONE PROGRAM, 1'ST STRING\n"); + printf ("Str_2_Loc: %s\n", Str_2_Loc); + printf (" should be: DHRYSTONE PROGRAM, 2'ND STRING\n"); + printf ("\n"); + + User_Time = End_Time - Begin_Time; + + if (User_Time < Too_Small_Time) + { + printf ("Measured time too small to obtain meaningful results\n"); + printf ("Please increase number of runs\n"); + printf ("\n"); + } + else + { +#ifdef TIME + Microseconds = (float) User_Time * Mic_secs_Per_Second + / (float) Number_Of_Runs; + Dhrystones_Per_Second = (float) Number_Of_Runs / (float) User_Time; +#else + Microseconds = (float) User_Time * Mic_secs_Per_Second + / ((float) HZ * ((float) Number_Of_Runs)); + Dhrystones_Per_Second = ((float) HZ * (float) Number_Of_Runs) + / (float) User_Time; +#endif + printf ("Microseconds for one run through Dhrystone: "); + printf ("%6.1f \n", Microseconds); + printf ("Dhrystones per Second: "); + printf ("%6.1f \n", Dhrystones_Per_Second); + printf ("\n"); + } +#endif /* SELF_TIMED */ +} + + +void Proc_1 (REG Rec_Pointer Ptr_Val_Par) + /* executed once */ +{ + REG Rec_Pointer Next_Record = Ptr_Val_Par->Ptr_Comp; + /* == Ptr_Glob_Next */ + /* Local variable, initialized with Ptr_Val_Par->Ptr_Comp, */ + /* corresponds to "rename" in Ada, "with" in Pascal */ + + structassign (*Ptr_Val_Par->Ptr_Comp, *Ptr_Glob); + Ptr_Val_Par->variant.var_1.Int_Comp = 5; + Next_Record->variant.var_1.Int_Comp + = Ptr_Val_Par->variant.var_1.Int_Comp; + Next_Record->Ptr_Comp = Ptr_Val_Par->Ptr_Comp; + Proc_3 (&Next_Record->Ptr_Comp); + /* Ptr_Val_Par->Ptr_Comp->Ptr_Comp + == Ptr_Glob->Ptr_Comp */ + if (Next_Record->Discr == Ident_1) + /* then, executed */ + { + Next_Record->variant.var_1.Int_Comp = 6; + Proc_6 (Ptr_Val_Par->variant.var_1.Enum_Comp, + &Next_Record->variant.var_1.Enum_Comp); + Next_Record->Ptr_Comp = Ptr_Glob->Ptr_Comp; + Proc_7 (Next_Record->variant.var_1.Int_Comp, 10, + &Next_Record->variant.var_1.Int_Comp); + } + else /* not executed */ + structassign (*Ptr_Val_Par, *Ptr_Val_Par->Ptr_Comp); +} /* Proc_1 */ + + +void Proc_2 (One_Fifty *Int_Par_Ref) + /* executed once */ + /* *Int_Par_Ref == 1, becomes 4 */ +{ + One_Fifty Int_Loc; + Enumeration Enum_Loc; + + Enum_Loc = 0; + + Int_Loc = *Int_Par_Ref + 10; + do /* executed once */ + if (Ch_1_Glob == 'A') + /* then, executed */ + { + Int_Loc -= 1; + *Int_Par_Ref = Int_Loc - Int_Glob; + Enum_Loc = Ident_1; + } /* if */ + while (Enum_Loc != Ident_1); /* true */ +} /* Proc_2 */ + + +void Proc_3 (Rec_Pointer *Ptr_Ref_Par) + /* executed once */ + /* Ptr_Ref_Par becomes Ptr_Glob */ +{ + if (Ptr_Glob != Null) + /* then, executed */ + *Ptr_Ref_Par = Ptr_Glob->Ptr_Comp; + Proc_7 (10, Int_Glob, &Ptr_Glob->variant.var_1.Int_Comp); +} /* Proc_3 */ + + +void Proc_4 (void) /* without parameters */ + /* executed once */ +{ + Boolean Bool_Loc; + + Bool_Loc = Ch_1_Glob == 'A'; + Bool_Glob = Bool_Loc | Bool_Glob; + Ch_2_Glob = 'B'; +} /* Proc_4 */ + +void Proc_5 (void) /* without parameters */ +/*******/ + /* executed once */ +{ + Ch_1_Glob = 'A'; + Bool_Glob = false; +} /* Proc_5 */ + + + /* Procedure for the assignment of structures, */ + /* if the C compiler doesn't support this feature */ +#ifdef NOSTRUCTASSIGN +memcpy (d, s, l) +register char *d; +register char *s; +register int l; +{ + while (l--) *d++ = *s++; +} +#endif diff --git a/lib/dhry/dhry_2.c b/lib/dhry/dhry_2.c new file mode 100644 index 0000000..59aa458 --- /dev/null +++ b/lib/dhry/dhry_2.c @@ -0,0 +1,217 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Dhrystone is widely available in the public domain. A GPL license is + * chosen for U-Boot. + */ + +/***************************************************************************** + * The BYTE UNIX Benchmarks - Release 3 + * Module: dhry_2.c SID: 3.4 5/15/91 19:30:22 + * + ***************************************************************************** + * Bug reports, patches, comments, suggestions should be sent to: + * + * Ben Smith, Rick Grehan or Tom Yager + * ben@bytepb.byte.com rick_g@bytepb.byte.com tyager@bytepb.byte.com + * + ***************************************************************************** + * Modification Log: + * 10/22/97 - code cleanup to remove ANSI C compiler warnings + * Andy Kahn <kahn@zk3.dec.com> + * + * Adapted from: + * + * "DHRYSTONE" Benchmark Program + * ----------------------------- + * + * **** WARNING **** See warning in n.dhry_1.c + * + * Version: C, Version 2.1 + * + * File: dhry_2.c (part 3 of 3) + * + * Date: May 25, 1988 + * + * Author: Reinhold P. Weicker + * + ****************************************************************************/ +/* SCCSid is defined in dhry_1.c */ + +#include <common.h> +#include "dhry.h" + +#ifndef REG +#define REG + /* REG becomes defined as empty */ + /* i.e. no register variables */ +#endif + +extern int Int_Glob; +extern char Ch_1_Glob; + +void Proc_6(Enumeration, Enumeration *); +void Proc_7(One_Fifty, One_Fifty, One_Fifty *); +void Proc_8(Arr_1_Dim, Arr_2_Dim, int, int); +Enumeration Func_1(Capital_Letter, Capital_Letter); +Boolean Func_2(Str_30, Str_30); +Boolean Func_3(Enumeration); + +void Proc_6 (Enumeration Enum_Val_Par, Enumeration *Enum_Ref_Par) + /* executed once */ + /* Enum_Val_Par == Ident_3, Enum_Ref_Par becomes Ident_2 */ +{ + *Enum_Ref_Par = Enum_Val_Par; + if (! Func_3 (Enum_Val_Par)) + /* then, not executed */ + *Enum_Ref_Par = Ident_4; + switch (Enum_Val_Par) + { + case Ident_1: + *Enum_Ref_Par = Ident_1; + break; + case Ident_2: + if (Int_Glob > 100) + /* then */ + *Enum_Ref_Par = Ident_1; + else *Enum_Ref_Par = Ident_4; + break; + case Ident_3: /* executed */ + *Enum_Ref_Par = Ident_2; + break; + case Ident_4: break; + case Ident_5: + *Enum_Ref_Par = Ident_3; + break; + } /* switch */ +} /* Proc_6 */ + +void Proc_7 (Int_1_Par_Val, Int_2_Par_Val, Int_Par_Ref) +One_Fifty Int_1_Par_Val; +One_Fifty Int_2_Par_Val; +One_Fifty *Int_Par_Ref; +/**********************************************/ + /* executed three times */ + /* first call: Int_1_Par_Val == 2, Int_2_Par_Val == 3, */ + /* Int_Par_Ref becomes 7 */ + /* second call: Int_1_Par_Val == 10, Int_2_Par_Val == 5, */ + /* Int_Par_Ref becomes 17 */ + /* third call: Int_1_Par_Val == 6, Int_2_Par_Val == 10, */ + /* Int_Par_Ref becomes 18 */ +{ + One_Fifty Int_Loc; + + Int_Loc = Int_1_Par_Val + 2; + *Int_Par_Ref = Int_2_Par_Val + Int_Loc; +} /* Proc_7 */ + + +void Proc_8 (Arr_1_Par_Ref, Arr_2_Par_Ref, Int_1_Par_Val, Int_2_Par_Val) +/*********************************************************************/ + /* executed once */ + /* Int_Par_Val_1 == 3 */ + /* Int_Par_Val_2 == 7 */ +Arr_1_Dim Arr_1_Par_Ref; +Arr_2_Dim Arr_2_Par_Ref; +int Int_1_Par_Val; +int Int_2_Par_Val; +{ + REG One_Fifty Int_Index; + REG One_Fifty Int_Loc; + + Int_Loc = Int_1_Par_Val + 5; + Arr_1_Par_Ref [Int_Loc] = Int_2_Par_Val; + Arr_1_Par_Ref [Int_Loc+1] = Arr_1_Par_Ref [Int_Loc]; + Arr_1_Par_Ref [Int_Loc+30] = Int_Loc; + for (Int_Index = Int_Loc; Int_Index <= Int_Loc+1; ++Int_Index) + Arr_2_Par_Ref [Int_Loc] [Int_Index] = Int_Loc; + Arr_2_Par_Ref [Int_Loc] [Int_Loc-1] += 1; + Arr_2_Par_Ref [Int_Loc+20] [Int_Loc] = Arr_1_Par_Ref [Int_Loc]; + Int_Glob = 5; +} /* Proc_8 */ + + +Enumeration Func_1 (Capital_Letter Ch_1_Par_Val, Capital_Letter Ch_2_Par_Val) +/*************************************************/ + /* executed three times */ + /* first call: Ch_1_Par_Val == 'H', Ch_2_Par_Val == 'R' */ + /* second call: Ch_1_Par_Val == 'A', Ch_2_Par_Val == 'C' */ + /* third call: Ch_1_Par_Val == 'B', Ch_2_Par_Val == 'C' */ +{ + Capital_Letter Ch_1_Loc; + Capital_Letter Ch_2_Loc; + + Ch_1_Loc = Ch_1_Par_Val; + Ch_2_Loc = Ch_1_Loc; + if (Ch_2_Loc != Ch_2_Par_Val) + /* then, executed */ + return (Ident_1); + else /* not executed */ + { + Ch_1_Glob = Ch_1_Loc; + return (Ident_2); + } +} /* Func_1 */ + + + +Boolean Func_2 (Str_1_Par_Ref, Str_2_Par_Ref) +/*************************************************/ + /* executed once */ + /* Str_1_Par_Ref == "DHRYSTONE PROGRAM, 1'ST STRING" */ + /* Str_2_Par_Ref == "DHRYSTONE PROGRAM, 2'ND STRING" */ + +Str_30 Str_1_Par_Ref; +Str_30 Str_2_Par_Ref; +{ + REG One_Thirty Int_Loc; + Capital_Letter Ch_Loc; + + Ch_Loc = 'A'; + Int_Loc = 2; + while (Int_Loc <= 2) /* loop body executed once */ + if (Func_1 (Str_1_Par_Ref[Int_Loc], + Str_2_Par_Ref[Int_Loc+1]) == Ident_1) + /* then, executed */ + { + Ch_Loc = 'A'; + Int_Loc += 1; + } /* if, while */ + if (Ch_Loc >= 'W' && Ch_Loc < 'Z') + /* then, not executed */ + Int_Loc = 7; + if (Ch_Loc == 'R') + /* then, not executed */ + return (true); + else /* executed */ + { + if (strcmp (Str_1_Par_Ref, Str_2_Par_Ref) > 0) + /* then, not executed */ + { + Int_Loc += 7; + Int_Glob = Int_Loc; + return (true); + } + else /* executed */ + return (false); + } /* if Ch_Loc */ +} /* Func_2 */ + + +Boolean Func_3 (Enum_Par_Val) +/***************************/ + /* executed once */ + /* Enum_Par_Val == Ident_3 */ +Enumeration Enum_Par_Val; +{ + Enumeration Enum_Loc; + + Enum_Loc = Enum_Par_Val; + if (Enum_Loc == Ident_3) + /* then, executed */ + return (true); + else /* not executed */ + return (false); +} /* Func_3 */ diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 9877849..a954051 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -31,6 +31,7 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(NVIDIA_TEGRA124_SOR, "nvidia,tegra124-sor"), COMPAT(NVIDIA_TEGRA124_PMC, "nvidia,tegra124-pmc"), COMPAT(NVIDIA_TEGRA20_DC, "nvidia,tegra20-dc"), + COMPAT(NVIDIA_TEGRA210_SDMMC, "nvidia,tegra210-sdhci"), COMPAT(NVIDIA_TEGRA124_SDMMC, "nvidia,tegra124-sdhci"), COMPAT(NVIDIA_TEGRA30_SDMMC, "nvidia,tegra30-sdhci"), COMPAT(NVIDIA_TEGRA20_SDMMC, "nvidia,tegra20-sdhci"), @@ -38,6 +39,7 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(NVIDIA_TEGRA30_PCIE, "nvidia,tegra30-pcie"), COMPAT(NVIDIA_TEGRA20_PCIE, "nvidia,tegra20-pcie"), COMPAT(NVIDIA_TEGRA124_XUSB_PADCTL, "nvidia,tegra124-xusb-padctl"), + COMPAT(NVIDIA_TEGRA210_XUSB_PADCTL, "nvidia,tegra210-xusb-padctl"), COMPAT(SMSC_LAN9215, "smsc,lan9215"), COMPAT(SAMSUNG_EXYNOS5_SROMC, "samsung,exynos-sromc"), COMPAT(SAMSUNG_S3C2440_I2C, "samsung,s3c2440-i2c"), @@ -88,29 +90,45 @@ const char *fdtdec_get_compatible(enum fdt_compat_id id) fdt_addr_t fdtdec_get_addr_size(const void *blob, int node, const char *prop_name, fdt_size_t *sizep) { - const fdt_addr_t *cell; - int len; + const fdt32_t *ptr, *end; + int parent, na, ns, len; + fdt_addr_t addr; debug("%s: %s: ", __func__, prop_name); - cell = fdt_getprop(blob, node, prop_name, &len); - if (cell && ((!sizep && len == sizeof(fdt_addr_t)) || - len == sizeof(fdt_addr_t) * 2)) { - fdt_addr_t addr = fdt_addr_to_cpu(*cell); - if (sizep) { - const fdt_size_t *size; - - size = (fdt_size_t *)((char *)cell + - sizeof(fdt_addr_t)); - *sizep = fdt_size_to_cpu(*size); - debug("addr=%08lx, size=%08x\n", - (ulong)addr, *sizep); - } else { - debug("%08lx\n", (ulong)addr); - } - return addr; + + parent = fdt_parent_offset(blob, node); + if (parent < 0) { + debug("(no parent found)\n"); + return FDT_ADDR_T_NONE; } - debug("(not found)\n"); - return FDT_ADDR_T_NONE; + + na = fdt_address_cells(blob, parent); + ns = fdt_size_cells(blob, parent); + + ptr = fdt_getprop(blob, node, prop_name, &len); + if (!ptr) { + debug("(not found)\n"); + return FDT_ADDR_T_NONE; + } + + end = ptr + len / sizeof(*ptr); + + if (ptr + na + ns > end) { + debug("(not enough data: expected %d bytes, got %d bytes)\n", + (na + ns) * 4, len); + return FDT_ADDR_T_NONE; + } + + addr = fdtdec_get_number(ptr, na); + + if (sizep) { + *sizep = fdtdec_get_number(ptr + na, ns); + debug("addr=%pa, size=%pa\n", &addr, sizep); + } else { + debug("%pa\n", &addr); + } + + return addr; } fdt_addr_t fdtdec_get_addr(const void *blob, int node, @@ -505,8 +523,7 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int offset, const char *prop; const char *name; const char *slash; - const char *p; - int len; + int len, val; prop = fdt_getprop_by_offset(blob, prop_offset, &name, &len); debug(" - %s, %s\n", name, prop); @@ -517,12 +534,11 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int offset, slash = strrchr(prop, '/'); if (strcmp(slash + 1, find_name)) continue; - for (p = name + strlen(name) - 1; p > name; p--) { - if (!isdigit(*p)) { - *seqp = simple_strtoul(p + 1, NULL, 10); - debug("Found seq %d\n", *seqp); - return 0; - } + val = trailing_strtol(name); + if (val != -1) { + *seqp = val; + debug("Found seq %d\n", *seqp); + return 0; } } @@ -570,6 +586,13 @@ int fdtdec_prepare_fdt(void) puts("Missing DTB\n"); #else puts("No valid device tree binary found - please append one to U-Boot binary, use u-boot-dtb.bin or define CONFIG_OF_EMBED. For sandbox, use -d <file.dtb>\n"); +# ifdef DEBUG + if (gd->fdt_blob) { + printf("fdt_blob=%p\n", gd->fdt_blob); + print_buffer((ulong)gd->fdt_blob, gd->fdt_blob, 4, + 32, 0); + } +# endif #endif return -1; } diff --git a/lib/libfdt/Makefile b/lib/libfdt/Makefile index 2f5413f..934d614 100644 --- a/lib/libfdt/Makefile +++ b/lib/libfdt/Makefile @@ -6,4 +6,4 @@ # obj-y += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o \ - fdt_empty_tree.o fdt_addresses.o + fdt_empty_tree.o fdt_addresses.o fdt_region.o diff --git a/lib/libfdt/fdt_region.c b/lib/libfdt/fdt_region.c new file mode 100644 index 0000000..9fea775 --- /dev/null +++ b/lib/libfdt/fdt_region.c @@ -0,0 +1,492 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2013 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause + */ + +#include "libfdt_env.h" + +#ifndef USE_HOSTCC +#include <fdt.h> +#include <libfdt.h> +#else +#include "fdt_host.h" +#endif + +#include "libfdt_internal.h" + +/** + * fdt_add_region() - Add a new region to our list + * + * The region is added if there is space, but in any case we increment the + * count. If permitted, and the new region overlaps the last one, we merge + * them. + * + * @info: State information + * @offset: Start offset of region + * @size: Size of region + */ +static int fdt_add_region(struct fdt_region_state *info, int offset, int size) +{ + struct fdt_region *reg; + + reg = info->region ? &info->region[info->count - 1] : NULL; + if (info->can_merge && info->count && + info->count <= info->max_regions && + reg && offset <= reg->offset + reg->size) { + reg->size = offset + size - reg->offset; + } else if (info->count++ < info->max_regions) { + if (reg) { + reg++; + reg->offset = offset; + reg->size = size; + } + } else { + return -1; + } + + return 0; +} + +static int region_list_contains_offset(struct fdt_region_state *info, + const void *fdt, int target) +{ + struct fdt_region *reg; + int num; + + target += fdt_off_dt_struct(fdt); + for (reg = info->region, num = 0; num < info->count; reg++, num++) { + if (target >= reg->offset && target < reg->offset + reg->size) + return 1; + } + + return 0; +} + +int fdt_add_alias_regions(const void *fdt, struct fdt_region *region, int count, + int max_regions, struct fdt_region_state *info) +{ + int base = fdt_off_dt_struct(fdt); + int node, node_end, offset; + int did_alias_header; + + node = fdt_subnode_offset(fdt, 0, "aliases"); + if (node < 0) + return -FDT_ERR_NOTFOUND; + + /* The aliases node must come before the others */ + node_end = fdt_next_subnode(fdt, node); + if (node_end <= 0) + return -FDT_ERR_BADLAYOUT; + node_end -= sizeof(fdt32_t); + + did_alias_header = 0; + info->region = region; + info->count = count; + info->can_merge = 0; + info->max_regions = max_regions; + + for (offset = fdt_first_property_offset(fdt, node); + offset >= 0; + offset = fdt_next_property_offset(fdt, offset)) { + const struct fdt_property *prop; + const char *name; + int target, next; + + prop = fdt_get_property_by_offset(fdt, offset, NULL); + name = fdt_string(fdt, fdt32_to_cpu(prop->nameoff)); + target = fdt_path_offset(fdt, name); + if (!region_list_contains_offset(info, fdt, target)) + continue; + next = fdt_next_property_offset(fdt, offset); + if (next < 0) + next = node_end - sizeof(fdt32_t); + + if (!did_alias_header) { + fdt_add_region(info, base + node, 12); + did_alias_header = 1; + } + fdt_add_region(info, base + offset, next - offset); + } + + /* Add the 'end' tag */ + if (did_alias_header) + fdt_add_region(info, base + node_end, sizeof(fdt32_t)); + + return info->count < max_regions ? info->count : -FDT_ERR_NOSPACE; +} + +/** + * fdt_include_supernodes() - Include supernodes required by this node + * + * When we decided to include a node or property which is not at the top + * level, this function forces the inclusion of higher level nodes. For + * example, given this tree: + * + * / { + * testing { + * } + * } + * + * If we decide to include testing then we need the root node to have a valid + * tree. This function adds those regions. + * + * @info: State information + * @depth: Current stack depth + */ +static int fdt_include_supernodes(struct fdt_region_state *info, int depth) +{ + int base = fdt_off_dt_struct(info->fdt); + int start, stop_at; + int i; + + /* + * Work down the stack looking for supernodes that we didn't include. + * The algortihm here is actually pretty simple, since we know that + * no previous subnode had to include these nodes, or if it did, we + * marked them as included (on the stack) already. + */ + for (i = 0; i <= depth; i++) { + if (!info->stack[i].included) { + start = info->stack[i].offset; + + /* Add the FDT_BEGIN_NODE tag of this supernode */ + fdt_next_tag(info->fdt, start, &stop_at); + if (fdt_add_region(info, base + start, stop_at - start)) + return -1; + + /* Remember that this supernode is now included */ + info->stack[i].included = 1; + info->can_merge = 1; + } + + /* Force (later) generation of the FDT_END_NODE tag */ + if (!info->stack[i].want) + info->stack[i].want = WANT_NODES_ONLY; + } + + return 0; +} + +enum { + FDT_DONE_NOTHING, + FDT_DONE_MEM_RSVMAP, + FDT_DONE_STRUCT, + FDT_DONE_END, + FDT_DONE_STRINGS, + FDT_DONE_ALL, +}; + +int fdt_first_region(const void *fdt, + int (*h_include)(void *priv, const void *fdt, int offset, + int type, const char *data, int size), + void *priv, struct fdt_region *region, + char *path, int path_len, int flags, + struct fdt_region_state *info) +{ + struct fdt_region_ptrs *p = &info->ptrs; + + /* Set up our state */ + info->fdt = fdt; + info->can_merge = 1; + info->max_regions = 1; + info->start = -1; + p->want = WANT_NOTHING; + p->end = path; + *p->end = '\0'; + p->nextoffset = 0; + p->depth = -1; + p->done = FDT_DONE_NOTHING; + + return fdt_next_region(fdt, h_include, priv, region, + path, path_len, flags, info); +} + +/* + * Theory of operation + * + * + * + +Note: in this description 'included' means that a node (or other part of +the tree) should be included in the region list, i.e. it will have a region +which covers its part of the tree. + +This function maintains some state from the last time it is called. It +checks the next part of the tree that it is supposed to look at +(p.nextoffset) to see if that should be included or not. When it finds +something to include, it sets info->start to its offset. This marks the +start of the region we want to include. + +Once info->start is set to the start (i.e. not -1), we continue scanning +until we find something that we don't want included. This will be the end +of a region. At this point we can close off the region and add it to the +list. So we do so, and reset info->start to -1. + +One complication here is that we want to merge regions. So when we come to +add another region later, we may in fact merge it with the previous one if +one ends where the other starts. + +The function fdt_add_region() will return -1 if it fails to add the region, +because we already have a region ready to be returned, and the new one +cannot be merged in with it. In this case, we must return the region we +found, and wait for another call to this function. When it comes, we will +repeat the processing of the tag and again try to add a region. This time it +will succeed. + +The current state of the pointers (stack, offset, etc.) is maintained in +a ptrs member. At the start of every loop iteration we make a copy of it. +The copy is then updated as the tag is processed. Only if we get to the end +of the loop iteration (and successfully call fdt_add_region() if we need +to) can we commit the changes we have made to these pointers. For example, +if we see an FDT_END_NODE tag we will decrement the depth value. But if we +need to add a region for this tag (let's say because the previous tag is +included and this FDT_END_NODE tag is not included) then we will only commit +the result if we were able to add the region. That allows us to retry again +next time. + +We keep track of a variable called 'want' which tells us what we want to +include when there is no specific information provided by the h_include +function for a particular property. This basically handles the inclusion of +properties which are pulled in by virtue of the node they are in. So if you +include a node, its properties are also included. In this case 'want' will +be WANT_NODES_AND_PROPS. The FDT_REG_DIRECT_SUBNODES feature also makes use +of 'want'. While we are inside the subnode, 'want' will be set to +WANT_NODES_ONLY, so that only the subnode's FDT_BEGIN_NODE and FDT_END_NODE +tags will be included, and properties will be skipped. If WANT_NOTHING is +selected, then we will just rely on what the h_include() function tells us. + +Using 'want' we work out 'include', which tells us whether this current tag +should be included or not. As you can imagine, if the value of 'include' +changes, that means we are on a boundary between nodes to include and nodes +to exclude. At this point we either close off a previous region and add it +to the list, or mark the start of a new region. + +Apart from the nodes, we have mem_rsvmap, the FDT_END tag and the string +list. Each of these dealt with as a whole (i.e. we create a region for each +if it is to be included). For mem_rsvmap we don't allow it to merge with +the first struct region. For the stringlist we don't allow it to merge with +the last struct region (which contains at minimum the FDT_END tag). +*/ +int fdt_next_region(const void *fdt, + int (*h_include)(void *priv, const void *fdt, int offset, + int type, const char *data, int size), + void *priv, struct fdt_region *region, + char *path, int path_len, int flags, + struct fdt_region_state *info) +{ + int base = fdt_off_dt_struct(fdt); + int last_node = 0; + const char *str; + + info->region = region; + info->count = 0; + if (info->ptrs.done < FDT_DONE_MEM_RSVMAP && + (flags & FDT_REG_ADD_MEM_RSVMAP)) { + /* Add the memory reserve map into its own region */ + if (fdt_add_region(info, fdt_off_mem_rsvmap(fdt), + fdt_off_dt_struct(fdt) - + fdt_off_mem_rsvmap(fdt))) + return 0; + info->can_merge = 0; /* Don't allow merging with this */ + info->ptrs.done = FDT_DONE_MEM_RSVMAP; + } + + /* + * Work through the tags one by one, deciding whether each needs to + * be included or not. We set the variable 'include' to indicate our + * decision. 'want' is used to track what we want to include - it + * allows us to pick up all the properties (and/or subnode tags) of + * a node. + */ + while (info->ptrs.done < FDT_DONE_STRUCT) { + const struct fdt_property *prop; + struct fdt_region_ptrs p; + const char *name; + int include = 0; + int stop_at = 0; + uint32_t tag; + int offset; + int val; + int len; + + /* + * Make a copy of our pointers. If we make it to the end of + * this block then we will commit them back to info->ptrs. + * Otherwise we can try again from the same starting state + * next time we are called. + */ + p = info->ptrs; + + /* + * Find the tag, and the offset of the next one. If we need to + * stop including tags, then by default we stop *after* + * including the current tag + */ + offset = p.nextoffset; + tag = fdt_next_tag(fdt, offset, &p.nextoffset); + stop_at = p.nextoffset; + + switch (tag) { + case FDT_PROP: + stop_at = offset; + prop = fdt_get_property_by_offset(fdt, offset, NULL); + str = fdt_string(fdt, fdt32_to_cpu(prop->nameoff)); + val = h_include(priv, fdt, last_node, FDT_IS_PROP, str, + strlen(str) + 1); + if (val == -1) { + include = p.want >= WANT_NODES_AND_PROPS; + } else { + include = val; + /* + * Make sure we include the } for this block. + * It might be more correct to have this done + * by the call to fdt_include_supernodes() in + * the case where it adds the node we are + * currently in, but this is equivalent. + */ + if ((flags & FDT_REG_SUPERNODES) && val && + !p.want) + p.want = WANT_NODES_ONLY; + } + + /* Value grepping is not yet supported */ + break; + + case FDT_NOP: + include = p.want >= WANT_NODES_AND_PROPS; + stop_at = offset; + break; + + case FDT_BEGIN_NODE: + last_node = offset; + p.depth++; + if (p.depth == FDT_MAX_DEPTH) + return -FDT_ERR_TOODEEP; + name = fdt_get_name(fdt, offset, &len); + if (p.end - path + 2 + len >= path_len) + return -FDT_ERR_NOSPACE; + + /* Build the full path of this node */ + if (p.end != path + 1) + *p.end++ = '/'; + strcpy(p.end, name); + p.end += len; + info->stack[p.depth].want = p.want; + info->stack[p.depth].offset = offset; + + /* + * If we are not intending to include this node unless + * it matches, make sure we stop *before* its tag. + */ + if (p.want == WANT_NODES_ONLY || + !(flags & (FDT_REG_DIRECT_SUBNODES | + FDT_REG_ALL_SUBNODES))) { + stop_at = offset; + p.want = WANT_NOTHING; + } + val = h_include(priv, fdt, offset, FDT_IS_NODE, path, + p.end - path + 1); + + /* Include this if requested */ + if (val) { + p.want = (flags & FDT_REG_ALL_SUBNODES) ? + WANT_ALL_NODES_AND_PROPS : + WANT_NODES_AND_PROPS; + } + + /* If not requested, decay our 'p.want' value */ + else if (p.want) { + if (p.want != WANT_ALL_NODES_AND_PROPS) + p.want--; + + /* Not including this tag, so stop now */ + } else { + stop_at = offset; + } + + /* + * Decide whether to include this tag, and update our + * stack with the state for this node + */ + include = p.want; + info->stack[p.depth].included = include; + break; + + case FDT_END_NODE: + include = p.want; + if (p.depth < 0) + return -FDT_ERR_BADSTRUCTURE; + + /* + * If we don't want this node, stop right away, unless + * we are including subnodes + */ + if (!p.want && !(flags & FDT_REG_DIRECT_SUBNODES)) + stop_at = offset; + p.want = info->stack[p.depth].want; + p.depth--; + while (p.end > path && *--p.end != '/') + ; + *p.end = '\0'; + break; + + case FDT_END: + /* We always include the end tag */ + include = 1; + p.done = FDT_DONE_STRUCT; + break; + } + + /* If this tag is to be included, mark it as region start */ + if (include && info->start == -1) { + /* Include any supernodes required by this one */ + if (flags & FDT_REG_SUPERNODES) { + if (fdt_include_supernodes(info, p.depth)) + return 0; + } + info->start = offset; + } + + /* + * If this tag is not to be included, finish up the current + * region. + */ + if (!include && info->start != -1) { + if (fdt_add_region(info, base + info->start, + stop_at - info->start)) + return 0; + info->start = -1; + info->can_merge = 1; + } + + /* If we have made it this far, we can commit our pointers */ + info->ptrs = p; + } + + /* Add a region for the END tag and a separate one for string table */ + if (info->ptrs.done < FDT_DONE_END) { + if (info->ptrs.nextoffset != fdt_size_dt_struct(fdt)) + return -FDT_ERR_BADSTRUCTURE; + + if (fdt_add_region(info, base + info->start, + info->ptrs.nextoffset - info->start)) + return 0; + info->ptrs.done++; + } + if (info->ptrs.done < FDT_DONE_STRINGS) { + if (flags & FDT_REG_ADD_STRING_TAB) { + info->can_merge = 0; + if (fdt_off_dt_strings(fdt) < + base + info->ptrs.nextoffset) + return -FDT_ERR_BADLAYOUT; + if (fdt_add_region(info, fdt_off_dt_strings(fdt), + fdt_size_dt_strings(fdt))) + return 0; + } + info->ptrs.done++; + } + + return info->count > 0 ? 0 : -FDT_ERR_NOTFOUND; +} diff --git a/lib/libfdt/fdt_ro.c b/lib/libfdt/fdt_ro.c index 44fc0aa..7b0777b 100644 --- a/lib/libfdt/fdt_ro.c +++ b/lib/libfdt/fdt_ro.c @@ -517,7 +517,7 @@ int fdt_count_strings(const void *fdt, int node, const char *property) list = fdt_getprop(fdt, node, property, &length); if (!list) - return -length; + return length; for (i = 0; i < length; i++) { int len = strlen(list); @@ -577,7 +577,7 @@ int fdt_get_string_index(const void *fdt, int node, const char *property, index--; } - return FDT_ERR_NOTFOUND; + return -FDT_ERR_NOTFOUND; } int fdt_get_string(const void *fdt, int node, const char *property, diff --git a/lib/libfdt/fdt_rw.c b/lib/libfdt/fdt_rw.c index bec8b8a..1a358a8 100644 --- a/lib/libfdt/fdt_rw.c +++ b/lib/libfdt/fdt_rw.c @@ -449,3 +449,35 @@ int fdt_pack(void *fdt) return 0; } + +int fdt_remove_unused_strings(const void *old, void *new) +{ + const struct fdt_property *old_prop; + struct fdt_property *new_prop; + int size = fdt_totalsize(old); + int next_offset, offset; + const char *str; + int ret; + int tag = FDT_PROP; + + /* Make a copy and remove the strings */ + memcpy(new, old, size); + fdt_set_size_dt_strings(new, 0); + + /* Add every property name back into the new string table */ + for (offset = 0; tag != FDT_END; offset = next_offset) { + tag = fdt_next_tag(old, offset, &next_offset); + if (tag != FDT_PROP) + continue; + old_prop = fdt_get_property_by_offset(old, offset, NULL); + new_prop = (struct fdt_property *)(unsigned long) + fdt_get_property_by_offset(new, offset, NULL); + str = fdt_string(old, fdt32_to_cpu(old_prop->nameoff)); + ret = _fdt_find_add_string(new, str); + if (ret < 0) + return ret; + new_prop->nameoff = cpu_to_fdt32(ret); + } + + return 0; +} diff --git a/lib/linux_compat.c b/lib/linux_compat.c index a3d4675..a936a7e 100644 --- a/lib/linux_compat.c +++ b/lib/linux_compat.c @@ -16,19 +16,13 @@ unsigned long copy_from_user(void *dest, const void *src, void *kmalloc(size_t size, int flags) { - return memalign(ARCH_DMA_MINALIGN, size); -} + void *p; -void *kzalloc(size_t size, int flags) -{ - void *ptr = kmalloc(size, flags); - memset(ptr, 0, size); - return ptr; -} + p = memalign(ARCH_DMA_MINALIGN, size); + if (flags & __GFP_ZERO) + memset(p, 0, size); -void *vzalloc(unsigned long size) -{ - return kzalloc(size, 0); + return p; } struct kmem_cache *get_mem(int element_sz) diff --git a/lib/rc4.c b/lib/rc4.c new file mode 100644 index 0000000..89d15f3 --- /dev/null +++ b/lib/rc4.c @@ -0,0 +1,49 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * (C) Copyright 2008-2014 Rockchip Electronics + * + * Rivest Cipher 4 (RC4) implementation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef USE_HOSTCC +#include <common.h> +#endif +#include <rc4.h> + +void rc4_encode(unsigned char *buf, unsigned int len, unsigned char key[16]) +{ + unsigned char s[256], k[256], temp; + unsigned short i, j, t; + int ptr; + + j = 0; + for (i = 0; i < 256; i++) { + s[i] = (unsigned char)i; + j &= 0x0f; + k[i] = key[j]; + j++; + } + + j = 0; + for (i = 0; i < 256; i++) { + j = (j + s[i] + k[i]) % 256; + temp = s[i]; + s[i] = s[j]; + s[j] = temp; + } + + i = 0; + j = 0; + for (ptr = 0; ptr < len; ptr++) { + i = (i + 1) % 256; + j = (j + s[i]) % 256; + temp = s[i]; + s[i] = s[j]; + s[j] = temp; + t = (s[i] + (s[j] % 256)) % 256; + buf[ptr] = buf[ptr] ^ s[t]; + } +} diff --git a/lib/vsprintf.c b/lib/vsprintf.c index a9b8a3a..4c82837 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -166,6 +166,25 @@ unsigned long long simple_strtoull(const char *cp, char **endp, return result; } +long trailing_strtoln(const char *str, const char *end) +{ + const char *p; + + if (!end) + end = str + strlen(str); + for (p = end - 1; p > str; p--) { + if (!isdigit(*p)) + return simple_strtoul(p + 1, NULL, 10); + } + + return -1; +} + +long trailing_strtol(const char *str) +{ + return trailing_strtoln(str, NULL); +} + /* we use this so that we can do without the ctype library */ #define is_digit(c) ((c) >= '0' && (c) <= '9') @@ -287,7 +287,13 @@ static int eth_write_hwaddr(struct udevice *dev) return -EINVAL; } + /* + * Drivers are allowed to decide not to implement this at + * run-time. E.g. Some devices may use it and some may not. + */ ret = eth_get_ops(dev)->write_hwaddr(dev); + if (ret == -ENOSYS) + ret = 0; if (ret) printf("\nWarning: %s failed to set MAC address\n", dev->name); @@ -404,6 +410,7 @@ int eth_rx(void) { struct udevice *current; uchar *packet; + int flags; int ret; int i; @@ -415,8 +422,10 @@ int eth_rx(void) return -EINVAL; /* Process up to 32 packets at one time */ + flags = ETH_RECV_CHECK_DEVICE; for (i = 0; i < 32; i++) { - ret = eth_get_ops(current)->recv(current, &packet); + ret = eth_get_ops(current)->recv(current, flags, &packet); + flags = 0; if (ret > 0) net_process_received_packet(packet, ret); if (ret >= 0 && eth_get_ops(current)->free_pkt) diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index d20f20a..f02eb37 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -131,17 +131,15 @@ cc-disable-warning = $(call try-run,\ $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1))) # cc-version -# Usage gcc-ver := $(call cc-version) cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC)) # cc-fullversion -# Usage gcc-ver := $(call cc-fullversion) cc-fullversion = $(shell $(CONFIG_SHELL) \ $(srctree)/scripts/gcc-version.sh -p $(CC)) # cc-ifversion # Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1) -cc-ifversion = $(shell [ $(call cc-version, $(CC)) $(1) $(2) ] && echo $(3)) +cc-ifversion = $(shell [ $(cc-version) $(1) $(2) ] && echo $(3) || echo $(4)) # added for U-Boot binutils-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/binutils-version.sh $(AS)) @@ -163,13 +161,12 @@ ld-option = $(call try-run,\ ar-option = $(call try-run, $(AR) rc$(1) "$$TMP",$(1),$(2)) # ld-version -# Usage: $(call ld-version) # Note this is mainly for HJ Lu's 3 number binutil versions ld-version = $(shell $(LD) --version | $(srctree)/scripts/ld-version.sh) # ld-ifversion # Usage: $(call ld-ifversion, -ge, 22252, y) -ld-ifversion = $(shell [ $(call ld-version) $(1) $(2) ] && echo $(3)) +ld-ifversion = $(shell [ $(ld-version) $(1) $(2) ] && echo $(3) || echo $(4)) ###### @@ -185,6 +182,24 @@ build := -f $(srctree)/scripts/Makefile.build obj # $(Q)$(MAKE) $(modbuiltin)=dir modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj +### +# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj= +# Usage: +# $(Q)$(MAKE) $(dtbinst)=dir +dtbinst := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.dtbinst obj + +### +# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj= +# Usage: +# $(Q)$(MAKE) $(clean)=dir +clean := -f $(srctree)/scripts/Makefile.clean obj + +### +# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.headersinst obj= +# Usage: +# $(Q)$(MAKE) $(hdr-inst)=dir +hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj + # Prefix -I with $(srctree) if it is not an absolute path. # skip if -I has no parameter addtree = $(if $(patsubst -I%,%,$(1)), \ diff --git a/scripts/Makefile.autoconf b/scripts/Makefile.autoconf index 36bfa17..d668982 100644 --- a/scripts/Makefile.autoconf +++ b/scripts/Makefile.autoconf @@ -107,6 +107,7 @@ include/config.h: scripts/Makefile.autoconf create_symlink FORCE # Otherwise, create a symbolic link to arch/$(ARCH)/include/asm/arch-$(SOC). PHONY += create_symlink create_symlink: +ifdef CONFIG_CREATE_ARCH_SYMLINK ifneq ($(KBUILD_SRC),) $(Q)mkdir -p include/asm $(Q)if [ -d $(KBUILD_SRC)/arch/$(ARCH)/mach-$(SOC)/include/mach ]; then \ @@ -123,6 +124,7 @@ else fi; \ ln -fsn $$dest arch/$(ARCH)/include/asm/arch endif +endif PHONY += FORCE FORCE: diff --git a/scripts/Makefile.build b/scripts/Makefile.build index ac0554e..de818ae 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -253,8 +253,9 @@ sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH "$(if $(part-of-module),1,0)" "$(@)"; recordmcount_source := $(srctree)/scripts/recordmcount.pl endif -cmd_record_mcount = \ - if [ "$(findstring -pg,$(_c_flags))" = "-pg" ]; then \ +cmd_record_mcount = \ + if [ "$(findstring $(CC_FLAGS_FTRACE),$(_c_flags))" = \ + "$(CC_FLAGS_FTRACE)" ]; then \ $(sub_cmd_record_mcount) \ fi; endif diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean index 21e1f21..4853631 100644 --- a/scripts/Makefile.clean +++ b/scripts/Makefile.clean @@ -7,10 +7,7 @@ src := $(obj) PHONY := __clean __clean: -# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir -# Usage: -# $(Q)$(MAKE) $(clean)=dir -clean := -f $(srctree)/scripts/Makefile.clean obj +include scripts/Kbuild.include # The filename Kbuild has precedence over Makefile kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) @@ -50,19 +47,19 @@ __clean-files := $(extra-y) $(extra-m) $(extra-) \ __clean-files := $(filter-out $(no-clean-files), $(__clean-files)) -# as clean-files is given relative to the current directory, this adds -# a $(obj) prefix, except for absolute paths +# clean-files is given relative to the current directory, unless it +# starts with $(objtree)/ (which means "./", so do not add "./" unless +# you want to delete a file from the toplevel object directory). __clean-files := $(wildcard \ - $(addprefix $(obj)/, $(filter-out /%, $(__clean-files))) \ - $(filter /%, $(__clean-files))) + $(addprefix $(obj)/, $(filter-out $(objtree)/%, $(__clean-files))) \ + $(filter $(objtree)/%, $(__clean-files))) -# as clean-dirs is given relative to the current directory, this adds -# a $(obj) prefix, except for absolute paths +# same as clean-files __clean-dirs := $(wildcard \ - $(addprefix $(obj)/, $(filter-out /%, $(clean-dirs))) \ - $(filter /%, $(clean-dirs))) + $(addprefix $(obj)/, $(filter-out $(objtree)/%, $(clean-dirs))) \ + $(filter $(objtree)/%, $(clean-dirs))) # ========================================================================== @@ -79,9 +76,6 @@ endif ifneq ($(strip $(__clean-dirs)),) +$(call cmd,cleandir) endif -ifneq ($(strip $(clean-rule)),) - +$(clean-rule) -endif @: @@ -96,11 +90,6 @@ PHONY += $(subdir-ymn) $(subdir-ymn): $(Q)$(MAKE) $(clean)=$@ -# If quiet is set, only print short version of command - -cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1)) - - # Declare the contents of the .PHONY variable as phony. We keep that # information in a variable se we can use it in if_changed and friends. diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 8731fc6..84915d7 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -119,6 +119,16 @@ _c_flags += $(if $(patsubst n%,, \ $(CFLAGS_GCOV)) endif +# +# Enable address sanitizer flags for kernel except some files or directories +# we don't want to check (depends on variables KASAN_SANITIZE_obj.o, KASAN_SANITIZE) +# +ifeq ($(CONFIG_KASAN),y) +_c_flags += $(if $(patsubst n%,, \ + $(KASAN_SANITIZE_$(basetarget).o)$(KASAN_SANITIZE)y), \ + $(CFLAGS_KASAN)) +endif + # If building the kernel in a separate objtree expand all occurrences # of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/'). @@ -274,7 +284,8 @@ $(obj)/%.dtb.S: $(obj)/%.dtb quiet_cmd_dtc = DTC $@ # Modified for U-Boot -cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ +cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \ + $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ $(DTC) -O dtb -o $@ -b 0 \ -i $(dir $<) $(DTC_FLAGS) \ -d $(depfile).dtc.tmp $(dtc-tmp) ; \ @@ -285,18 +296,6 @@ $(obj)/%.dtb: $(src)/%.dts FORCE dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) -# Helper targets for Installing DTBs into the boot directory -quiet_cmd_dtb_install = INSTALL $< - cmd_dtb_install = cp $< $(2) - -_dtbinst_pre_: - $(Q)if [ -d $(INSTALL_DTBS_PATH).old ]; then rm -rf $(INSTALL_DTBS_PATH).old; fi - $(Q)if [ -d $(INSTALL_DTBS_PATH) ]; then mv $(INSTALL_DTBS_PATH) $(INSTALL_DTBS_PATH).old; fi - $(Q)mkdir -p $(INSTALL_DTBS_PATH) - -%.dtb_dtbinst_: $(obj)/%.dtb _dtbinst_pre_ - $(call cmd,dtb_install,$(INSTALL_DTBS_PATH)) - # Bzip2 # --------------------------------------------------------------------------- diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index fd572f4..b1047b5 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -54,18 +54,22 @@ libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/ libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/ +libs-$(CONFIG_SPL_CLK_SUPPORT) += drivers/clk/ libs-$(CONFIG_SPL_DM) += drivers/core/ libs-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/ libs-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/ libs-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/ libs-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/ -libs-$(CONFIG_SYS_MVEBU_DDR) += drivers/ddr/mvebu/ +libs-$(CONFIG_SYS_MVEBU_DDR_A38X) += drivers/ddr/marvell/a38x/ +libs-$(CONFIG_SYS_MVEBU_DDR_AXP) += drivers/ddr/marvell/axp/ libs-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/ libs-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/ libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/ libs-y += fs/ +libs-$(CONFIG_SPL_LED_SUPPORT) += drivers/led/ libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/ libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/ +libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/regulator/ libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/ libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/ libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/ @@ -76,6 +80,7 @@ libs-$(CONFIG_SPL_NET_SUPPORT) += net/ libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/ libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/ libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/ +libs-$(CONFIG_SPL_RAM_SUPPORT) += drivers/ram/ libs-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/ libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/ libs-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/ @@ -151,6 +156,8 @@ boot.bin: $(obj)/u-boot-spl.bin ALL-y += $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).cfg +ALL-$(CONFIG_OF_SEPARATE) += $(obj)/$(SPL_BIN)-pad.bin $(obj)/$(SPL_BIN)-dtb.bin + ifdef CONFIG_SAMSUNG ALL-y += $(obj)/$(BOARD)-spl.bin endif @@ -165,6 +172,32 @@ endif all: $(ALL-y) +quiet_cmd_cat = CAT $@ +cmd_cat = cat $(filter-out $(PHONY), $^) > $@ + +$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN)-pad.bin \ + $(obj)/$(SPL_BIN).dtb FORCE + $(call if_changed,cat) + +# Create a file that pads from the end of u-boot-spl.bin to bss_end +$(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN) + @bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \ + dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null; + +# Pass the original device tree file through fdtgrep twice. The first pass +# removes any unwanted nodes (i.e. those which don't have the +# 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second +# pass removes various unused properties from the remaining nodes. +# The output is typically a much smaller device tree file. +quiet_cmd_fdtgrep = FDTGREP $@ + cmd_fdtgrep = $(objtree)/tools/fdtgrep -b u-boot,dm-pre-reloc -RT $< \ + -n /chosen -O dtb | \ + $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \ + $(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS))) + +$(obj)/$(SPL_BIN).dtb: dts/dt.dtb + $(call cmd,fdtgrep) + quiet_cmd_cpp_cfg = CFG $@ cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $< diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index ff4ce6e..46ddf2d 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -2,7 +2,7 @@ # Kernel configuration targets # These targets are used from top-level makefile -PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \ +PHONY += xconfig gconfig menuconfig config silentoldconfig update-po-config \ localmodconfig localyesconfig # Added for U-Boot @@ -17,30 +17,31 @@ else Kconfig := Kconfig endif +ifeq ($(quiet),silent_) +silent := -s +endif + # We need this, in case the user has it in its environment unexport CONFIG_ xconfig: $(obj)/qconf - $< $(Kconfig) + $< $(silent) $(Kconfig) gconfig: $(obj)/gconf - $< $(Kconfig) + $< $(silent) $(Kconfig) menuconfig: $(obj)/mconf - $< $(Kconfig) + $< $(silent) $(Kconfig) config: $(obj)/conf - $< --oldaskconfig $(Kconfig) + $< $(silent) --oldaskconfig $(Kconfig) nconfig: $(obj)/nconf - $< $(Kconfig) - -oldconfig: $(obj)/conf - $< --$@ $(Kconfig) + $< $(silent) $(Kconfig) silentoldconfig: $(obj)/conf $(Q)mkdir -p include/config include/generated - $< --$@ $(Kconfig) + $< $(silent) --$@ $(Kconfig) localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf $(Q)mkdir -p include/config include/generated @@ -49,18 +50,18 @@ localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf cmp -s .tmp.config .config || \ (mv -f .config .config.old.1; \ mv -f .tmp.config .config; \ - $(obj)/conf --silentoldconfig $(Kconfig); \ + $(obj)/conf $(silent) --silentoldconfig $(Kconfig); \ mv -f .config.old.1 .config.old) \ else \ mv -f .tmp.config .config; \ - $(obj)/conf --silentoldconfig $(Kconfig); \ + $(obj)/conf $(silent) --silentoldconfig $(Kconfig); \ fi $(Q)rm -f .tmp.config # Create new linux.pot file # Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h - $(Q)echo " GEN config.pot" + $(Q)$(kecho) " GEN config.pot" $(Q)xgettext --default-domain=linux \ --add-comments --keyword=_ --keyword=N_ \ --from-code=UTF-8 \ @@ -71,65 +72,62 @@ update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h $(Q)(for i in `ls $(srctree)/arch/*/Kconfig \ $(srctree)/arch/*/um/Kconfig`; \ do \ - echo " GEN $$i"; \ + $(kecho) " GEN $$i"; \ $(obj)/kxgettext $$i \ >> $(obj)/config.pot; \ done ) - $(Q)echo " GEN linux.pot" + $(Q)$(kecho) " GEN linux.pot" $(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \ --output $(obj)/linux.pot $(Q)rm -f $(obj)/config.pot -PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig +# These targets map 1:1 to the commandline options of 'conf' +simple-targets := oldconfig allnoconfig allyesconfig allmodconfig \ + alldefconfig randconfig listnewconfig olddefconfig +PHONY += $(simple-targets) -allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf - $< --$@ $(Kconfig) +$(simple-targets): $(obj)/conf + $< $(silent) --$@ $(Kconfig) -PHONY += listnewconfig olddefconfig oldnoconfig savedefconfig defconfig - -listnewconfig olddefconfig: $(obj)/conf - $< --$@ $(Kconfig) +PHONY += oldnoconfig savedefconfig defconfig # oldnoconfig is an alias of olddefconfig, because people already are dependent # on its behavior(sets new symbols to their default value but not 'n') with the # counter-intuitive name. -oldnoconfig: $(obj)/conf - $< --olddefconfig $(Kconfig) +oldnoconfig: olddefconfig savedefconfig: $(obj)/conf - $< --$@=defconfig $(Kconfig) + $< $(silent) --$@=defconfig $(Kconfig) defconfig: $(obj)/conf ifeq ($(KBUILD_DEFCONFIG),) - $< --defconfig $(Kconfig) + $< $(silent) --defconfig $(Kconfig) else - @echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'" - $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig) + @$(kecho) "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'" + $(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig) endif %_defconfig: $(obj)/conf - $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig) + $(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig) # Added for U-Boot (backward compatibility) %_config: %_defconfig @: -configfiles=$(wildcard $(srctree)/kernel/configs/$(1).config $(srctree)/arch/$(SRCARCH)/configs/$(1).config) +configfiles=$(wildcard $(srctree)/kernel/configs/$@ $(srctree)/arch/$(SRCARCH)/configs/$@) -define mergeconfig -$(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target)) -$(if $(call configfiles,$(1)),, $(error No configuration exists for this target on this architecture)) -$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(call configfiles,$(1)) -$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig -endef +%.config: $(obj)/conf + $(if $(call configfiles),, $(error No configuration exists for this target on this architecture)) + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m .config $(configfiles) + +$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig PHONY += kvmconfig -kvmconfig: - $(call mergeconfig,kvm_guest) +kvmconfig: kvm_guest.config + @: PHONY += tinyconfig -tinyconfig: allnoconfig - $(call mergeconfig,tiny) +tinyconfig: + $(Q)$(MAKE) -f $(srctree)/Makefile allnoconfig tiny.config # Help text used by make help help: @@ -231,7 +229,7 @@ $(obj)/.tmp_qtcheck: $(src)/Makefile # QT needs some extra effort... $(obj)/.tmp_qtcheck: - @set -e; echo " CHECK qt"; dir=""; pkg=""; \ + @set -e; $(kecho) " CHECK qt"; dir=""; pkg=""; \ if ! pkg-config --exists QtCore 2> /dev/null; then \ echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \ pkg-config --exists qt 2> /dev/null && pkg=qt; \ diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index fef75fc..6c20431 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -471,7 +471,7 @@ static struct option long_opts[] = { static void conf_usage(const char *progname) { - printf("Usage: %s [option] <kconfig-file>\n", progname); + printf("Usage: %s [-s] [option] <kconfig-file>\n", progname); printf("[option] is _one_ of the following:\n"); printf(" --listnewconfig List new options\n"); printf(" --oldaskconfig Start a new configuration using a line-oriented program\n"); @@ -501,7 +501,11 @@ int main(int ac, char **av) tty_stdio = isatty(0) && isatty(1) && isatty(2); - while ((opt = getopt_long(ac, av, "", long_opts, NULL)) != -1) { + while ((opt = getopt_long(ac, av, "s", long_opts, NULL)) != -1) { + if (opt == 's') { + conf_set_message_callback(NULL); + continue; + } input_mode = (enum input_mode)opt; switch (opt) { case silentoldconfig: diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 2f778df..9847ae6 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -16,6 +16,11 @@ #include "lkc.h" +struct conf_printer { + void (*print_symbol)(FILE *, struct symbol *, const char *, void *); + void (*print_comment)(FILE *, const char *, void *); +}; + static void conf_warning(const char *fmt, ...) __attribute__ ((format (printf, 1, 2))); @@ -59,6 +64,7 @@ static void conf_message(const char *fmt, ...) va_start(ap, fmt); if (conf_message_callback) conf_message_callback(fmt, ap); + va_end(ap); } const char *conf_get_configname(void) diff --git a/scripts/kconfig/expr.c b/scripts/kconfig/expr.c index d662652..fb0a2a2 100644 --- a/scripts/kconfig/expr.c +++ b/scripts/kconfig/expr.c @@ -11,6 +11,12 @@ #define DEBUG_EXPR 0 +static int expr_eq(struct expr *e1, struct expr *e2); +static struct expr *expr_eliminate_yn(struct expr *e); +static struct expr *expr_extract_eq_and(struct expr **ep1, struct expr **ep2); +static struct expr *expr_extract_eq_or(struct expr **ep1, struct expr **ep2); +static void expr_extract_eq(enum expr_type type, struct expr **ep, struct expr **ep1, struct expr **ep2); + struct expr *expr_alloc_symbol(struct symbol *sym) { struct expr *e = xcalloc(1, sizeof(*e)); @@ -186,7 +192,7 @@ void expr_eliminate_eq(struct expr **ep1, struct expr **ep2) #undef e1 #undef e2 -int expr_eq(struct expr *e1, struct expr *e2) +static int expr_eq(struct expr *e1, struct expr *e2) { int res, old_count; @@ -228,7 +234,7 @@ int expr_eq(struct expr *e1, struct expr *e2) return 0; } -struct expr *expr_eliminate_yn(struct expr *e) +static struct expr *expr_eliminate_yn(struct expr *e) { struct expr *tmp; @@ -823,7 +829,7 @@ bool expr_depends_symbol(struct expr *dep, struct symbol *sym) return false; } -struct expr *expr_extract_eq_and(struct expr **ep1, struct expr **ep2) +static struct expr *expr_extract_eq_and(struct expr **ep1, struct expr **ep2) { struct expr *tmp = NULL; expr_extract_eq(E_AND, &tmp, ep1, ep2); @@ -834,7 +840,7 @@ struct expr *expr_extract_eq_and(struct expr **ep1, struct expr **ep2) return tmp; } -struct expr *expr_extract_eq_or(struct expr **ep1, struct expr **ep2) +static struct expr *expr_extract_eq_or(struct expr **ep1, struct expr **ep2) { struct expr *tmp = NULL; expr_extract_eq(E_OR, &tmp, ep1, ep2); @@ -845,7 +851,7 @@ struct expr *expr_extract_eq_or(struct expr **ep1, struct expr **ep2) return tmp; } -void expr_extract_eq(enum expr_type type, struct expr **ep, struct expr **ep1, struct expr **ep2) +static void expr_extract_eq(enum expr_type type, struct expr **ep, struct expr **ep1, struct expr **ep2) { #define e1 (*ep1) #define e2 (*ep2) @@ -976,11 +982,8 @@ tristate expr_calc_value(struct expr *e) } } -int expr_compare_type(enum expr_type t1, enum expr_type t2) +static int expr_compare_type(enum expr_type t1, enum expr_type t2) { -#if 0 - return 1; -#else if (t1 == t2) return 0; switch (t1) { @@ -1005,7 +1008,6 @@ int expr_compare_type(enum expr_type t1, enum expr_type t2) } printf("[%dgt%d?]", t1, t2); return 0; -#endif } static inline struct expr * diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h index 412ea8a..a2fc96a 100644 --- a/scripts/kconfig/expr.h +++ b/scripts/kconfig/expr.h @@ -205,18 +205,13 @@ struct expr *expr_alloc_and(struct expr *e1, struct expr *e2); struct expr *expr_alloc_or(struct expr *e1, struct expr *e2); struct expr *expr_copy(const struct expr *org); void expr_free(struct expr *e); -int expr_eq(struct expr *e1, struct expr *e2); void expr_eliminate_eq(struct expr **ep1, struct expr **ep2); tristate expr_calc_value(struct expr *e); -struct expr *expr_eliminate_yn(struct expr *e); struct expr *expr_trans_bool(struct expr *e); struct expr *expr_eliminate_dups(struct expr *e); struct expr *expr_transform(struct expr *e); int expr_contains_symbol(struct expr *dep, struct symbol *sym); bool expr_depends_symbol(struct expr *dep, struct symbol *sym); -struct expr *expr_extract_eq_and(struct expr **ep1, struct expr **ep2); -struct expr *expr_extract_eq_or(struct expr **ep1, struct expr **ep2); -void expr_extract_eq(enum expr_type type, struct expr **ep, struct expr **ep1, struct expr **ep2); struct expr *expr_trans_compare(struct expr *e, enum expr_type type, struct symbol *sym); struct expr *expr_simplify_unmet_dep(struct expr *e1, struct expr *e2); diff --git a/scripts/kconfig/gconf.c b/scripts/kconfig/gconf.c index d0a35b2..26d208b 100644 --- a/scripts/kconfig/gconf.c +++ b/scripts/kconfig/gconf.c @@ -169,14 +169,6 @@ void init_main_window(const gchar * glade_file) style = gtk_widget_get_style(main_wnd); widget = glade_xml_get_widget(xml, "toolbar1"); -#if 0 /* Use stock Gtk icons instead */ - replace_button_icon(xml, main_wnd->window, style, - "button1", (gchar **) xpm_back); - replace_button_icon(xml, main_wnd->window, style, - "button2", (gchar **) xpm_load); - replace_button_icon(xml, main_wnd->window, style, - "button3", (gchar **) xpm_save); -#endif replace_button_icon(xml, main_wnd->window, style, "button4", (gchar **) xpm_single_view); replace_button_icon(xml, main_wnd->window, style, @@ -184,22 +176,6 @@ void init_main_window(const gchar * glade_file) replace_button_icon(xml, main_wnd->window, style, "button6", (gchar **) xpm_tree_view); -#if 0 - switch (view_mode) { - case SINGLE_VIEW: - widget = glade_xml_get_widget(xml, "button4"); - g_signal_emit_by_name(widget, "clicked"); - break; - case SPLIT_VIEW: - widget = glade_xml_get_widget(xml, "button5"); - g_signal_emit_by_name(widget, "clicked"); - break; - case FULL_VIEW: - widget = glade_xml_get_widget(xml, "button6"); - g_signal_emit_by_name(widget, "clicked"); - break; - } -#endif txtbuf = gtk_text_view_get_buffer(GTK_TEXT_VIEW(text_w)); tag1 = gtk_text_buffer_create_tag(txtbuf, "mytag1", "foreground", "red", @@ -1498,9 +1474,12 @@ int main(int ac, char *av[]) case 'a': //showAll = 1; break; + case 's': + conf_set_message_callback(NULL); + break; case 'h': case '?': - printf("%s <config>\n", av[0]); + printf("%s [-s] <config>\n", av[0]); exit(0); } name = av[2]; diff --git a/scripts/kconfig/list.h b/scripts/kconfig/list.h index 685d80e..2cf23f0 100644 --- a/scripts/kconfig/list.h +++ b/scripts/kconfig/list.h @@ -34,7 +34,7 @@ struct list_head { * list_entry - get the struct for this entry * @ptr: the &struct list_head pointer. * @type: the type of the struct this is embedded in. - * @member: the name of the list_struct within the struct. + * @member: the name of the list_head within the struct. */ #define list_entry(ptr, type, member) \ container_of(ptr, type, member) @@ -43,7 +43,7 @@ struct list_head { * list_for_each_entry - iterate over list of given type * @pos: the type * to use as a loop cursor. * @head: the head for your list. - * @member: the name of the list_struct within the struct. + * @member: the name of the list_head within the struct. */ #define list_for_each_entry(pos, head, member) \ for (pos = list_entry((head)->next, typeof(*pos), member); \ @@ -55,7 +55,7 @@ struct list_head { * @pos: the type * to use as a loop cursor. * @n: another type * to use as temporary storage * @head: the head for your list. - * @member: the name of the list_struct within the struct. + * @member: the name of the list_head within the struct. */ #define list_for_each_entry_safe(pos, n, head, member) \ for (pos = list_entry((head)->next, typeof(*pos), member), \ diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h index d5daa7a..91ca126 100644 --- a/scripts/kconfig/lkc.h +++ b/scripts/kconfig/lkc.h @@ -21,9 +21,7 @@ static inline char *bind_textdomain_codeset(const char *dn, char *c) { return c; extern "C" { #endif -#define P(name,type,arg) extern type name arg #include "lkc_proto.h" -#undef P #define SRCTREE "srctree" @@ -70,9 +68,6 @@ struct kconf_id { enum symbol_type stype; }; -extern int zconfdebug; - -int zconfparse(void); void zconfdump(FILE *out); void zconf_starthelp(void); FILE *zconf_fopen(const char *name); @@ -90,11 +85,6 @@ void sym_add_change_count(int count); bool conf_set_all_new_symbols(enum conf_def_mode mode); void set_all_choice_values(struct symbol *csym); -struct conf_printer { - void (*print_symbol)(FILE *, struct symbol *, const char *, void *); - void (*print_comment)(FILE *, const char *, void *); -}; - /* confdata.c and expr.c */ static inline void xfwrite(const void *str, size_t len, size_t count, FILE *out) { @@ -113,7 +103,6 @@ void menu_add_entry(struct symbol *sym); void menu_end_entry(void); void menu_add_dep(struct expr *dep); void menu_add_visibility(struct expr *dep); -struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep); struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep); void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep); void menu_add_symbol(enum prop_type type, struct symbol *sym, struct expr *dep); @@ -137,7 +126,6 @@ struct gstr { int max_width; }; struct gstr str_new(void); -struct gstr str_assign(const char *s); void str_free(struct gstr *gs); void str_append(struct gstr *gs, const char *s); void str_printf(struct gstr *gs, const char *fmt, ...); @@ -148,8 +136,6 @@ extern struct expr *sym_env_list; void sym_init(void); void sym_clear_all_valid(void); -void sym_set_all_changed(void); -void sym_set_changed(struct symbol *sym); struct symbol *sym_choice_default(struct symbol *sym); const char *sym_get_string_default(struct symbol *sym); struct symbol *sym_check_deps(struct symbol *sym); diff --git a/scripts/kconfig/lkc_proto.h b/scripts/kconfig/lkc_proto.h index ecdb965..d539871 100644 --- a/scripts/kconfig/lkc_proto.h +++ b/scripts/kconfig/lkc_proto.h @@ -1,57 +1,52 @@ #include <stdarg.h> /* confdata.c */ -P(conf_parse,void,(const char *name)); -P(conf_read,int,(const char *name)); -P(conf_read_simple,int,(const char *name, int)); -P(conf_write_defconfig,int,(const char *name)); -P(conf_write,int,(const char *name)); -P(conf_write_autoconf,int,(void)); -P(conf_get_changed,bool,(void)); -P(conf_set_changed_callback, void,(void (*fn)(void))); -P(conf_set_message_callback, void,(void (*fn)(const char *fmt, va_list ap))); +void conf_parse(const char *name); +int conf_read(const char *name); +int conf_read_simple(const char *name, int); +int conf_write_defconfig(const char *name); +int conf_write(const char *name); +int conf_write_autoconf(void); +bool conf_get_changed(void); +void conf_set_changed_callback(void (*fn)(void)); +void conf_set_message_callback(void (*fn)(const char *fmt, va_list ap)); /* menu.c */ -P(rootmenu,struct menu,); +extern struct menu rootmenu; -P(menu_is_empty, bool, (struct menu *menu)); -P(menu_is_visible, bool, (struct menu *menu)); -P(menu_has_prompt, bool, (struct menu *menu)); -P(menu_get_prompt,const char *,(struct menu *menu)); -P(menu_get_root_menu,struct menu *,(struct menu *menu)); -P(menu_get_parent_menu,struct menu *,(struct menu *menu)); -P(menu_has_help,bool,(struct menu *menu)); -P(menu_get_help,const char *,(struct menu *menu)); -P(get_symbol_str, void, (struct gstr *r, struct symbol *sym, struct list_head - *head)); -P(get_relations_str, struct gstr, (struct symbol **sym_arr, struct list_head - *head)); -P(menu_get_ext_help,void,(struct menu *menu, struct gstr *help)); +bool menu_is_empty(struct menu *menu); +bool menu_is_visible(struct menu *menu); +bool menu_has_prompt(struct menu *menu); +const char * menu_get_prompt(struct menu *menu); +struct menu * menu_get_root_menu(struct menu *menu); +struct menu * menu_get_parent_menu(struct menu *menu); +bool menu_has_help(struct menu *menu); +const char * menu_get_help(struct menu *menu); +struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head); +void menu_get_ext_help(struct menu *menu, struct gstr *help); /* symbol.c */ -P(symbol_hash,struct symbol *,[SYMBOL_HASHSIZE]); +extern struct symbol * symbol_hash[SYMBOL_HASHSIZE]; -P(sym_lookup,struct symbol *,(const char *name, int flags)); -P(sym_find,struct symbol *,(const char *name)); -P(sym_expand_string_value,const char *,(const char *in)); -P(sym_escape_string_value, const char *,(const char *in)); -P(sym_re_search,struct symbol **,(const char *pattern)); -P(sym_type_name,const char *,(enum symbol_type type)); -P(sym_calc_value,void,(struct symbol *sym)); -P(sym_get_type,enum symbol_type,(struct symbol *sym)); -P(sym_tristate_within_range,bool,(struct symbol *sym,tristate tri)); -P(sym_set_tristate_value,bool,(struct symbol *sym,tristate tri)); -P(sym_toggle_tristate_value,tristate,(struct symbol *sym)); -P(sym_string_valid,bool,(struct symbol *sym, const char *newval)); -P(sym_string_within_range,bool,(struct symbol *sym, const char *str)); -P(sym_set_string_value,bool,(struct symbol *sym, const char *newval)); -P(sym_is_changable,bool,(struct symbol *sym)); -P(sym_get_choice_prop,struct property *,(struct symbol *sym)); -P(sym_get_default_prop,struct property *,(struct symbol *sym)); -P(sym_get_string_value,const char *,(struct symbol *sym)); +struct symbol * sym_lookup(const char *name, int flags); +struct symbol * sym_find(const char *name); +const char * sym_expand_string_value(const char *in); +const char * sym_escape_string_value(const char *in); +struct symbol ** sym_re_search(const char *pattern); +const char * sym_type_name(enum symbol_type type); +void sym_calc_value(struct symbol *sym); +enum symbol_type sym_get_type(struct symbol *sym); +bool sym_tristate_within_range(struct symbol *sym,tristate tri); +bool sym_set_tristate_value(struct symbol *sym,tristate tri); +tristate sym_toggle_tristate_value(struct symbol *sym); +bool sym_string_valid(struct symbol *sym, const char *newval); +bool sym_string_within_range(struct symbol *sym, const char *str); +bool sym_set_string_value(struct symbol *sym, const char *newval); +bool sym_is_changable(struct symbol *sym); +struct property * sym_get_choice_prop(struct symbol *sym); +const char * sym_get_string_value(struct symbol *sym); -P(prop_get_type_name,const char *,(enum prop_type type)); +const char * prop_get_type_name(enum prop_type type); /* expr.c */ -P(expr_compare_type,int,(enum expr_type t1, enum expr_type t2)); -P(expr_print,void,(struct expr *e, void (*fn)(void *, struct symbol *, const char *), void *data, int prevtoken)); +void expr_print(struct expr *e, void (*fn)(void *, struct symbol *, const char *), void *data, int prevtoken); diff --git a/scripts/kconfig/lxdialog/check-lxdialog.sh b/scripts/kconfig/lxdialog/check-lxdialog.sh index 9d2a4c5..5075ebf 100755 --- a/scripts/kconfig/lxdialog/check-lxdialog.sh +++ b/scripts/kconfig/lxdialog/check-lxdialog.sh @@ -21,7 +21,11 @@ ldflags() # Where is ncurses.h? ccflags() { - if [ -f /usr/include/ncursesw/curses.h ]; then + if pkg-config --cflags ncursesw 2>/dev/null; then + echo '-DCURSES_LOC="<ncurses.h>" -DNCURSES_WIDECHAR=1' + elif pkg-config --cflags ncurses 2>/dev/null; then + echo '-DCURSES_LOC="<ncurses.h>"' + elif [ -f /usr/include/ncursesw/curses.h ]; then echo '-I/usr/include/ncursesw -DCURSES_LOC="<curses.h>"' echo ' -DNCURSES_WIDECHAR=1' elif [ -f /usr/include/ncurses/ncurses.h ]; then diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c index 14cea74..315ce2c 100644 --- a/scripts/kconfig/mconf.c +++ b/scripts/kconfig/mconf.c @@ -279,6 +279,7 @@ static int child_count; static int single_menu_mode; static int show_all_options; static int save_and_exit; +static int silent; static void conf(struct menu *menu, struct menu *active_menu); static void conf_choice(struct menu *menu); @@ -330,10 +331,10 @@ static void set_subtitle(void) list_for_each_entry(sp, &trail, entries) { if (sp->text) { if (pos) { - pos->next = xcalloc(sizeof(*pos), 1); + pos->next = xcalloc(1, sizeof(*pos)); pos = pos->next; } else { - subtitles = pos = xcalloc(sizeof(*pos), 1); + subtitles = pos = xcalloc(1, sizeof(*pos)); } pos->text = sp->text; } @@ -777,10 +778,12 @@ static void conf_message_callback(const char *fmt, va_list ap) char buf[PATH_MAX+1]; vsnprintf(buf, sizeof(buf), fmt, ap); - if (save_and_exit) - printf("%s", buf); - else + if (save_and_exit) { + if (!silent) + printf("%s", buf); + } else { show_textbox(NULL, buf, 6, 60); + } } static void show_help(struct menu *menu) @@ -977,16 +980,18 @@ static int handle_exit(void) } /* fall through */ case -1: - printf(_("\n\n" - "*** End of the configuration.\n" - "*** Execute 'make' to start the build or try 'make help'." - "\n\n")); + if (!silent) + printf(_("\n\n" + "*** End of the configuration.\n" + "*** Execute 'make' to start the build or try 'make help'." + "\n\n")); res = 0; break; default: - fprintf(stderr, _("\n\n" - "Your configuration changes were NOT saved." - "\n\n")); + if (!silent) + fprintf(stderr, _("\n\n" + "Your configuration changes were NOT saved." + "\n\n")); if (res != KEY_ESC) res = 0; } @@ -1010,6 +1015,12 @@ int main(int ac, char **av) signal(SIGINT, sig_handler); + if (ac > 1 && strcmp(av[1], "-s") == 0) { + silent = 1; + /* Silence conf_read() until the real callback is set up */ + conf_set_message_callback(NULL); + av++; + } conf_parse(av[1]); conf_read(NULL); diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index 72c9dba..b05cc3d 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -125,7 +125,7 @@ void menu_set_type(int type) sym_type_name(sym->type), sym_type_name(type)); } -struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep) +static struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep) { struct property *prop = prop_alloc(type, current_entry->sym); @@ -615,7 +615,7 @@ static struct property *get_symbol_prop(struct symbol *sym) /* * head is optional and may be NULL */ -void get_symbol_str(struct gstr *r, struct symbol *sym, +static void get_symbol_str(struct gstr *r, struct symbol *sym, struct list_head *head) { bool hit; diff --git a/scripts/kconfig/merge_config.sh b/scripts/kconfig/merge_config.sh index efa4733..ec8e203 100755 --- a/scripts/kconfig/merge_config.sh +++ b/scripts/kconfig/merge_config.sh @@ -35,7 +35,7 @@ usage() { echo " -O dir to put generated output files" } -MAKE=true +RUNMAKE=true ALLTARGET=alldefconfig WARNREDUN=false OUTPUT=. @@ -48,7 +48,7 @@ while true; do continue ;; "-m") - MAKE=false + RUNMAKE=false shift continue ;; @@ -77,9 +77,19 @@ while true; do esac done +if [ "$#" -lt 2 ] ; then + usage + exit +fi + INITFILE=$1 shift; +if [ ! -r "$INITFILE" ]; then + echo "The base file '$INITFILE' does not exist. Exit." >&2 + exit 1 +fi + MERGE_LIST=$* SED_CONFIG_EXP="s/^\(# \)\{0,1\}\(CONFIG_[a-zA-Z0-9_]*\)[= ].*/\2/p" TMP_FILE=$(mktemp ./.tmp.config.XXXXXXXXXX) @@ -93,25 +103,23 @@ for MERGE_FILE in $MERGE_LIST ; do CFG_LIST=$(sed -n "$SED_CONFIG_EXP" $MERGE_FILE) for CFG in $CFG_LIST ; do - grep -q -w $CFG $TMP_FILE - if [ $? -eq 0 ] ; then - PREV_VAL=$(grep -w $CFG $TMP_FILE) - NEW_VAL=$(grep -w $CFG $MERGE_FILE) - if [ "x$PREV_VAL" != "x$NEW_VAL" ] ; then + grep -q -w $CFG $TMP_FILE || continue + PREV_VAL=$(grep -w $CFG $TMP_FILE) + NEW_VAL=$(grep -w $CFG $MERGE_FILE) + if [ "x$PREV_VAL" != "x$NEW_VAL" ] ; then echo Value of $CFG is redefined by fragment $MERGE_FILE: echo Previous value: $PREV_VAL echo New value: $NEW_VAL echo - elif [ "$WARNREDUN" = "true" ]; then + elif [ "$WARNREDUN" = "true" ]; then echo Value of $CFG is redundant by fragment $MERGE_FILE: - fi - sed -i "/$CFG[ =]/d" $TMP_FILE fi + sed -i "/$CFG[ =]/d" $TMP_FILE done cat $MERGE_FILE >> $TMP_FILE done -if [ "$MAKE" = "false" ]; then +if [ "$RUNMAKE" = "false" ]; then cp $TMP_FILE $OUTPUT/.config echo "#" echo "# merged configuration written to $OUTPUT/.config (needs make)" diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c index 984489e..d42d534 100644 --- a/scripts/kconfig/nconf.c +++ b/scripts/kconfig/nconf.c @@ -1482,6 +1482,11 @@ int main(int ac, char **av) bindtextdomain(PACKAGE, LOCALEDIR); textdomain(PACKAGE); + if (ac > 1 && strcmp(av[1], "-s") == 0) { + /* Silence conf_read() until the real callback is set up */ + conf_set_message_callback(NULL); + av++; + } conf_parse(av[1]); conf_read(NULL); diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc index 9d3b04b..c3bb7fe 100644 --- a/scripts/kconfig/qconf.cc +++ b/scripts/kconfig/qconf.cc @@ -1746,7 +1746,7 @@ static const char *progname; static void usage(void) { - printf(_("%s <config>\n"), progname); + printf(_("%s [-s] <config>\n"), progname); exit(0); } @@ -1762,6 +1762,9 @@ int main(int ac, char** av) configApp = new QApplication(ac, av); if (ac > 1 && av[1][0] == '-') { switch (av[1][1]) { + case 's': + conf_set_message_callback(NULL); + break; case 'h': case '?': usage(); diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c index ab339eb..550e1d7 100644 --- a/scripts/kconfig/symbol.c +++ b/scripts/kconfig/symbol.c @@ -112,7 +112,7 @@ struct property *sym_get_env_prop(struct symbol *sym) return NULL; } -struct property *sym_get_default_prop(struct symbol *sym) +static struct property *sym_get_default_prop(struct symbol *sym) { struct property *prop; @@ -186,6 +186,26 @@ static void sym_validate_range(struct symbol *sym) sym->curr.val = strdup(str); } +static void sym_set_changed(struct symbol *sym) +{ + struct property *prop; + + sym->flags |= SYMBOL_CHANGED; + for (prop = sym->prop; prop; prop = prop->next) { + if (prop->menu) + prop->menu->flags |= MENU_CHANGED; + } +} + +static void sym_set_all_changed(void) +{ + struct symbol *sym; + int i; + + for_all_symbols(i, sym) + sym_set_changed(sym); +} + static void sym_calc_visibility(struct symbol *sym) { struct property *prop; @@ -451,26 +471,6 @@ void sym_clear_all_valid(void) sym_calc_value(modules_sym); } -void sym_set_changed(struct symbol *sym) -{ - struct property *prop; - - sym->flags |= SYMBOL_CHANGED; - for (prop = sym->prop; prop; prop = prop->next) { - if (prop->menu) - prop->menu->flags |= MENU_CHANGED; - } -} - -void sym_set_all_changed(void) -{ - struct symbol *sym; - int i; - - for_all_symbols(i, sym) - sym_set_changed(sym); -} - bool sym_tristate_within_range(struct symbol *sym, tristate val) { int type = sym_get_type(sym); diff --git a/scripts/kconfig/util.c b/scripts/kconfig/util.c index 94f9c83..0e76042 100644 --- a/scripts/kconfig/util.c +++ b/scripts/kconfig/util.c @@ -88,16 +88,6 @@ struct gstr str_new(void) return gs; } -/* Allocate and assign growable string */ -struct gstr str_assign(const char *s) -{ - struct gstr gs; - gs.s = strdup(s); - gs.len = strlen(s) + 1; - gs.max_width = 0; - return gs; -} - /* Free storage for growable string */ void str_free(struct gstr *gs) { diff --git a/test/dm/Makefile b/test/dm/Makefile index 19ad2fb..eda9643 100644 --- a/test/dm/Makefile +++ b/test/dm/Makefile @@ -15,13 +15,20 @@ obj-$(CONFIG_UT_DM) += test-uclass.o # subsystem you must add sandbox tests here. obj-$(CONFIG_UT_DM) += core.o ifneq ($(CONFIG_SANDBOX),) +obj-$(CONFIG_CLK) += clk.o obj-$(CONFIG_DM_ETH) += eth.o obj-$(CONFIG_DM_GPIO) += gpio.o obj-$(CONFIG_DM_I2C) += i2c.o +obj-$(CONFIG_LED) += led.o +obj-$(CONFIG_DM_MMC) += mmc.o obj-$(CONFIG_DM_PCI) += pci.o +obj-$(CONFIG_RAM) += ram.o +obj-y += regmap.o +obj-$(CONFIG_RESET) += reset.o obj-$(CONFIG_DM_RTC) += rtc.o obj-$(CONFIG_DM_SPI_FLASH) += sf.o obj-$(CONFIG_DM_SPI) += spi.o +obj-y += syscon.o obj-$(CONFIG_DM_USB) += usb.o obj-$(CONFIG_DM_PMIC) += pmic.o obj-$(CONFIG_DM_REGULATOR) += regulator.o diff --git a/test/dm/clk.c b/test/dm/clk.c new file mode 100644 index 0000000..9ff6d95 --- /dev/null +++ b/test/dm/clk.c @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <asm/test.h> +#include <dm/test.h> +#include <linux/err.h> +#include <test/ut.h> + +/* Test that we can find and adjust clocks */ +static int dm_test_clk_base(struct unit_test_state *uts) +{ + struct udevice *clk; + ulong rate; + + ut_assertok(uclass_get_device(UCLASS_CLK, 0, &clk)); + rate = clk_get_rate(clk); + ut_asserteq(SANDBOX_CLK_RATE, rate); + ut_asserteq(-EINVAL, clk_set_rate(clk, 0)); + ut_assertok(clk_set_rate(clk, rate * 2)); + ut_asserteq(SANDBOX_CLK_RATE * 2, clk_get_rate(clk)); + + return 0; +} +DM_TEST(dm_test_clk_base, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +/* Test that peripheral clocks work as expected */ +static int dm_test_clk_periph(struct unit_test_state *uts) +{ + struct udevice *clk; + ulong rate; + + ut_assertok(uclass_get_device(UCLASS_CLK, 0, &clk)); + rate = clk_set_periph_rate(clk, PERIPH_ID_COUNT, 123); + ut_asserteq(-EINVAL, rate); + ut_asserteq(1, IS_ERR_VALUE(rate)); + + rate = clk_set_periph_rate(clk, PERIPH_ID_SPI, 123); + ut_asserteq(0, rate); + ut_asserteq(123, clk_get_periph_rate(clk, PERIPH_ID_SPI)); + + rate = clk_set_periph_rate(clk, PERIPH_ID_SPI, 1234); + ut_asserteq(123, rate); + + rate = clk_set_periph_rate(clk, PERIPH_ID_I2C, 567); + + rate = clk_set_periph_rate(clk, PERIPH_ID_SPI, 1234); + ut_asserteq(1234, rate); + + ut_asserteq(567, clk_get_periph_rate(clk, PERIPH_ID_I2C)); + + return 0; +} +DM_TEST(dm_test_clk_periph, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); diff --git a/test/dm/cmd_dm.c b/test/dm/cmd_dm.c index 5bb2a99..5c501ec 100644 --- a/test/dm/cmd_dm.c +++ b/test/dm/cmd_dm.c @@ -14,96 +14,20 @@ #include <errno.h> #include <asm/io.h> #include <dm/root.h> -#include <dm/uclass-internal.h> - -static void show_devices(struct udevice *dev, int depth, int last_flag) -{ - int i, is_last; - struct udevice *child; - char class_name[12]; - - /* print the first 11 characters to not break the tree-format. */ - strlcpy(class_name, dev->uclass->uc_drv->name, sizeof(class_name)); - printf(" %-11s [ %c ] ", class_name, - dev->flags & DM_FLAG_ACTIVATED ? '+' : ' '); - - for (i = depth; i >= 0; i--) { - is_last = (last_flag >> i) & 1; - if (i) { - if (is_last) - printf(" "); - else - printf("| "); - } else { - if (is_last) - printf("`-- "); - else - printf("|-- "); - } - } - - printf("%s\n", dev->name); - - list_for_each_entry(child, &dev->child_head, sibling_node) { - is_last = list_is_last(&child->sibling_node, &dev->child_head); - show_devices(child, depth + 1, (last_flag << 1) | is_last); - } -} +#include <dm/util.h> static int do_dm_dump_all(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - struct udevice *root; - - root = dm_root(); - if (root) { - printf(" Class Probed Name\n"); - printf("----------------------------------------\n"); - show_devices(root, -1, 0); - } + dm_dump_all(); return 0; } -/** - * dm_display_line() - Display information about a single device - * - * Displays a single line of information with an option prefix - * - * @dev: Device to display - */ -static void dm_display_line(struct udevice *dev) -{ - printf("- %c %s @ %08lx", - dev->flags & DM_FLAG_ACTIVATED ? '*' : ' ', - dev->name, (ulong)map_to_sysmem(dev)); - if (dev->seq != -1 || dev->req_seq != -1) - printf(", seq %d, (req %d)", dev->seq, dev->req_seq); - puts("\n"); -} - static int do_dm_dump_uclass(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - struct uclass *uc; - int ret; - int id; - - for (id = 0; id < UCLASS_COUNT; id++) { - struct udevice *dev; - - ret = uclass_get(id, &uc); - if (ret) - continue; - - printf("uclass %d: %s\n", id, uc->uc_drv->name); - if (list_empty(&uc->dev_head)) - continue; - list_for_each_entry(dev, &uc->dev_head, uclass_node) { - dm_display_line(dev); - } - puts("\n"); - } + dm_dump_uclass(); return 0; } diff --git a/test/dm/led.c b/test/dm/led.c new file mode 100644 index 0000000..8ee075c --- /dev/null +++ b/test/dm/led.c @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <led.h> +#include <asm/gpio.h> +#include <dm/test.h> +#include <test/ut.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Base test of the led uclass */ +static int dm_test_led_base(struct unit_test_state *uts) +{ + struct udevice *dev; + + /* Get the top-level device */ + ut_assertok(uclass_get_device(UCLASS_LED, 0, &dev)); + ut_assertok(uclass_get_device(UCLASS_LED, 1, &dev)); + ut_assertok(uclass_get_device(UCLASS_LED, 2, &dev)); + ut_asserteq(-ENODEV, uclass_get_device(UCLASS_LED, 3, &dev)); + + return 0; +} +DM_TEST(dm_test_led_base, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +/* Test of the led uclass using the led_gpio driver */ +static int dm_test_led_gpio(struct unit_test_state *uts) +{ + const int offset = 1; + struct udevice *dev, *gpio; + + /* + * Check that we can manipulate an LED. LED 1 is connected to GPIO + * bank gpio_a, offset 1. + */ + ut_assertok(uclass_get_device(UCLASS_LED, 1, &dev)); + ut_assertok(uclass_get_device(UCLASS_GPIO, 1, &gpio)); + ut_asserteq(0, sandbox_gpio_get_value(gpio, offset)); + led_set_on(dev, 1); + ut_asserteq(1, sandbox_gpio_get_value(gpio, offset)); + led_set_on(dev, 0); + ut_asserteq(0, sandbox_gpio_get_value(gpio, offset)); + + return 0; +} +DM_TEST(dm_test_led_gpio, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +/* Test obtaining an LED by label */ +static int dm_test_led_label(struct unit_test_state *uts) +{ + struct udevice *dev, *cmp; + + ut_assertok(led_get_by_label("sandbox:red", &dev)); + ut_asserteq(1, device_active(dev)); + ut_assertok(uclass_get_device(UCLASS_LED, 1, &cmp)); + ut_asserteq_ptr(dev, cmp); + + ut_assertok(led_get_by_label("sandbox:green", &dev)); + ut_asserteq(1, device_active(dev)); + ut_assertok(uclass_get_device(UCLASS_LED, 2, &cmp)); + ut_asserteq_ptr(dev, cmp); + + ut_asserteq(-ENODEV, led_get_by_label("sandbox:blue", &dev)); + + return 0; +} +DM_TEST(dm_test_led_label, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); diff --git a/test/dm/mmc.c b/test/dm/mmc.c new file mode 100644 index 0000000..0461423 --- /dev/null +++ b/test/dm/mmc.c @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <mmc.h> +#include <dm/test.h> +#include <test/ut.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Basic test of the mmc uclass. We could expand this by implementing an MMC + * stack for sandbox, or at least implementing the basic operation. + */ +static int dm_test_mmc_base(struct unit_test_state *uts) +{ + struct udevice *dev; + + ut_assertok(uclass_get_device(UCLASS_MMC, 0, &dev)); + + return 0; +} +DM_TEST(dm_test_mmc_base, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); diff --git a/test/dm/ram.c b/test/dm/ram.c new file mode 100644 index 0000000..3a7c5ff --- /dev/null +++ b/test/dm/ram.c @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <ram.h> +#include <dm/test.h> +#include <test/ut.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Basic test of the ram uclass */ +static int dm_test_ram_base(struct unit_test_state *uts) +{ + struct udevice *dev; + struct ram_info info; + + ut_assertok(uclass_get_device(UCLASS_RAM, 0, &dev)); + ut_assertok(ram_get_info(dev, &info)); + ut_asserteq(0, info.base); + ut_asserteq(gd->ram_size, info.size); + + return 0; +} +DM_TEST(dm_test_ram_base, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); diff --git a/test/dm/regmap.c b/test/dm/regmap.c new file mode 100644 index 0000000..7f66058 --- /dev/null +++ b/test/dm/regmap.c @@ -0,0 +1,82 @@ +/* + * Copyright (C) 2015 Google, Inc +2 * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <mapmem.h> +#include <regmap.h> +#include <syscon.h> +#include <asm/test.h> +#include <dm/test.h> +#include <test/ut.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Base test of register maps */ +static int dm_test_regmap_base(struct unit_test_state *uts) +{ + struct udevice *dev; + struct regmap *map; + int i; + + ut_assertok(uclass_get_device(UCLASS_SYSCON, 0, &dev)); + map = syscon_get_regmap(dev); + ut_assertok_ptr(map); + ut_asserteq(1, map->range_count); + ut_asserteq(0x10, map->base); + ut_asserteq(0x10, map->range->start); + ut_asserteq(4, map->range->size); + ut_asserteq_ptr(&map->base_range, map->range); + ut_asserteq(0x10, map_to_sysmem(regmap_get_range(map, 0))); + + ut_assertok(uclass_get_device(UCLASS_SYSCON, 1, &dev)); + map = syscon_get_regmap(dev); + ut_assertok_ptr(map); + ut_asserteq(4, map->range_count); + ut_asserteq(0x20, map->base); + ut_assert(&map->base_range != map->range); + for (i = 0; i < 4; i++) { + const unsigned long addr = 0x20 + 8 * i; + + ut_asserteq(addr, map->range[i].start); + ut_asserteq(5 + i, map->range[i].size); + ut_asserteq(addr, map_to_sysmem(regmap_get_range(map, i))); + } + + /* Check that we can't pretend a different device is a syscon */ + ut_assertok(uclass_get_device(UCLASS_I2C, 0, &dev)); + map = syscon_get_regmap(dev); + ut_asserteq_ptr(ERR_PTR(-ENOEXEC), map); + + return 0; +} +DM_TEST(dm_test_regmap_base, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +/* Test we can access a regmap through syscon */ +static int dm_test_regmap_syscon(struct unit_test_state *uts) +{ + struct regmap *map; + + map = syscon_get_regmap_by_driver_data(SYSCON0); + ut_assertok_ptr(map); + ut_asserteq(1, map->range_count); + + map = syscon_get_regmap_by_driver_data(SYSCON1); + ut_assertok_ptr(map); + ut_asserteq(4, map->range_count); + + map = syscon_get_regmap_by_driver_data(SYSCON_COUNT); + ut_asserteq_ptr(ERR_PTR(-ENODEV), map); + + ut_asserteq(0x10, map_to_sysmem(syscon_get_first_range(SYSCON0))); + ut_asserteq(0x20, map_to_sysmem(syscon_get_first_range(SYSCON1))); + ut_asserteq_ptr(ERR_PTR(-ENODEV), + syscon_get_first_range(SYSCON_COUNT)); + + return 0; +} + +DM_TEST(dm_test_regmap_syscon, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); diff --git a/test/dm/regulator.c b/test/dm/regulator.c index d279c04..3d0056f 100644 --- a/test/dm/regulator.c +++ b/test/dm/regulator.c @@ -210,7 +210,7 @@ static int dm_test_power_regulator_autoset(struct unit_test_state *uts) * Expected output state: uV=1200000; uA=200000; output enabled */ platname = regulator_names[BUCK1][PLATNAME]; - ut_assertok(regulator_autoset(platname, &dev_autoset, false)); + ut_assertok(regulator_autoset_by_name(platname, &dev_autoset)); /* Check, that the returned device is proper */ ut_assertok(regulator_get_by_platname(platname, &dev)); diff --git a/test/dm/reset.c b/test/dm/reset.c new file mode 100644 index 0000000..5d53f25 --- /dev/null +++ b/test/dm/reset.c @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <reset.h> +#include <asm/state.h> +#include <asm/test.h> +#include <dm/test.h> +#include <test/ut.h> + +/* Test that we can use particular reset devices */ +static int dm_test_reset_base(struct unit_test_state *uts) +{ + struct sandbox_state *state = state_get_current(); + struct udevice *dev; + + /* Device 0 is the platform data device - it should never respond */ + ut_assertok(uclass_get_device(UCLASS_RESET, 0, &dev)); + ut_asserteq(-ENODEV, reset_request(dev, RESET_WARM)); + ut_asserteq(-ENODEV, reset_request(dev, RESET_COLD)); + ut_asserteq(-ENODEV, reset_request(dev, RESET_POWER)); + + /* Device 1 is the warm reset device */ + ut_assertok(uclass_get_device(UCLASS_RESET, 1, &dev)); + ut_asserteq(-EACCES, reset_request(dev, RESET_WARM)); + ut_asserteq(-ENOSYS, reset_request(dev, RESET_COLD)); + ut_asserteq(-ENOSYS, reset_request(dev, RESET_POWER)); + + state->reset_allowed[RESET_WARM] = true; + ut_asserteq(-EINPROGRESS, reset_request(dev, RESET_WARM)); + state->reset_allowed[RESET_WARM] = false; + + /* Device 2 is the cold reset device */ + ut_assertok(uclass_get_device(UCLASS_RESET, 2, &dev)); + ut_asserteq(-ENOSYS, reset_request(dev, RESET_WARM)); + ut_asserteq(-EACCES, reset_request(dev, RESET_COLD)); + state->reset_allowed[RESET_POWER] = false; + ut_asserteq(-EACCES, reset_request(dev, RESET_POWER)); + state->reset_allowed[RESET_POWER] = true; + + return 0; +} +DM_TEST(dm_test_reset_base, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +/* Test that we can walk through the reset devices */ +static int dm_test_reset_walk(struct unit_test_state *uts) +{ + struct sandbox_state *state = state_get_current(); + + /* If we generate a power reset, we will exit sandbox! */ + state->reset_allowed[RESET_POWER] = false; + ut_asserteq(-EACCES, reset_walk(RESET_WARM)); + ut_asserteq(-EACCES, reset_walk(RESET_COLD)); + ut_asserteq(-EACCES, reset_walk(RESET_POWER)); + + /* + * Enable cold reset - this should make cold reset work, plus a warm + * reset should be promoted to cold, since this is the next step + * along. + */ + state->reset_allowed[RESET_COLD] = true; + ut_asserteq(-EINPROGRESS, reset_walk(RESET_WARM)); + ut_asserteq(-EINPROGRESS, reset_walk(RESET_COLD)); + ut_asserteq(-EACCES, reset_walk(RESET_POWER)); + state->reset_allowed[RESET_COLD] = false; + state->reset_allowed[RESET_POWER] = true; + + return 0; +} +DM_TEST(dm_test_reset_walk, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); diff --git a/test/dm/syscon.c b/test/dm/syscon.c new file mode 100644 index 0000000..3642481 --- /dev/null +++ b/test/dm/syscon.c @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <syscon.h> +#include <asm/test.h> +#include <dm/test.h> +#include <test/ut.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Base test of system controllers */ +static int dm_test_syscon_base(struct unit_test_state *uts) +{ + struct udevice *dev; + + ut_assertok(uclass_get_device(UCLASS_SYSCON, 0, &dev)); + ut_asserteq(SYSCON0, dev->driver_data); + + ut_assertok(uclass_get_device(UCLASS_SYSCON, 1, &dev)); + ut_asserteq(SYSCON1, dev->driver_data); + + ut_asserteq(-ENODEV, uclass_get_device(UCLASS_SYSCON, 2, &dev)); + + return 0; +} +DM_TEST(dm_test_syscon_base, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); diff --git a/test/dm/test-main.c b/test/dm/test-main.c index 0477d2f..0e43ab9 100644 --- a/test/dm/test-main.c +++ b/test/dm/test-main.c @@ -76,6 +76,7 @@ static int dm_test_main(const char *test_name) struct unit_test_state *uts = &global_dm_test_state; uts->priv = &_global_priv_dm_test_state; struct unit_test *test; + int run_count; /* * If we have no device tree, or it only has a root node, then these @@ -90,10 +91,17 @@ static int dm_test_main(const char *test_name) if (!test_name) printf("Running %d driver model tests\n", n_ents); + run_count = 0; for (test = tests; test < tests + n_ents; test++) { - if (test_name && strcmp(test_name, test->name)) + const char *name = test->name; + + /* All tests have this prefix */ + if (!strncmp(name, "dm_test_", 8)) + name += 8; + if (test_name && strcmp(test_name, name)) continue; printf("Test: %s\n", test->name); + run_count++; ut_assertok(dm_test_init(uts)); uts->start = mallinfo(); @@ -109,7 +117,10 @@ static int dm_test_main(const char *test_name) ut_assertok(dm_test_destroy(uts)); } - printf("Failures: %d\n", uts->fail_count); + if (test_name && !run_count) + printf("Test '%s' not found\n", test_name); + else + printf("Failures: %d\n", uts->fail_count); gd->dm_root = NULL; ut_assertok(dm_init()); diff --git a/tools/.gitignore b/tools/.gitignore index 9bc9fec..eb1a27e 100644 --- a/tools/.gitignore +++ b/tools/.gitignore @@ -11,7 +11,6 @@ /mkenvimage /mkimage /mkexynosspl -/mpc86x_clk /mxsboot /mksunxiboot /ncb diff --git a/tools/Makefile b/tools/Makefile index 8ff9c2e..f673258 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -58,7 +58,8 @@ hostprogs-$(CONFIG_FIT_SIGNATURE) += fit_info fit_check_sign FIT_SIG_OBJS-$(CONFIG_FIT_SIGNATURE) := common/image-sig.o # Flattened device tree objects LIBFDT_OBJS := $(addprefix lib/libfdt/, \ - fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_wip.o) + fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_wip.o \ + fdt_region.o) RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/rsa/, \ rsa-sign.o rsa-verify.o rsa-checksum.o \ rsa-mod-exp.o) @@ -116,8 +117,8 @@ ifdef CONFIG_FIT_SIGNATURE HOST_EXTRACFLAGS += -DCONFIG_FIT_SIGNATURE endif -ifdef CONFIG_SYS_SPI_U_BOOT_OFFS -HOSTCFLAGS_kwbimage.o += -DCONFIG_SYS_SPI_U_BOOT_OFFS=$(CONFIG_SYS_SPI_U_BOOT_OFFS) +ifdef CONFIG_SYS_U_BOOT_OFFS +HOSTCFLAGS_kwbimage.o += -DCONFIG_SYS_U_BOOT_OFFS=$(CONFIG_SYS_U_BOOT_OFFS) endif # MXSImage needs LibSSL @@ -155,6 +156,9 @@ hostprogs-$(CONFIG_ARMADA_XP) += kwboot hostprogs-y += proftool hostprogs-$(CONFIG_STATIC_RELA) += relocate-rela +hostprogs-y += fdtgrep +fdtgrep-objs += $(LIBFDT_OBJS) fdtgrep.o + # We build some files with extra pedantic flags to try to minimize things # that won't build on some weird host compiler -- though there are lots of # exceptions for files that aren't complaint. @@ -163,10 +167,6 @@ HOSTCFLAGS_md5.o := -pedantic HOSTCFLAGS_sha1.o := -pedantic HOSTCFLAGS_sha256.o := -pedantic -# Don't build by default -#hostprogs-$(CONFIG_PPC) += mpc86x_clk -#HOSTCFLAGS_mpc86x_clk.o := -pedantic - quiet_cmd_wrap = WRAP $@ cmd_wrap = echo "\#include <../$(patsubst $(obj)/%,%,$@)>" >$@ diff --git a/tools/buildman/README b/tools/buildman/README index 8ecdd8f..10c7135 100644 --- a/tools/buildman/README +++ b/tools/buildman/README @@ -318,7 +318,7 @@ settings file to find them. To make this easier, buildman can automatically download and install toolchains from kernel.org. First list the available architectures: -$ ./tools/buildman/buildman sandbox --fetch-arch list +$ ./tools/buildman/buildman --fetch-arch list Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/ Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.2/ Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.5.1/ @@ -329,7 +329,7 @@ sparc sparc64 tilegx x86_64 xtensa Then pick one and download it: -$ ./tools/buildman/buildman sandbox --fetch-arch or32 +$ ./tools/buildman/buildman --fetch-arch or32 Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/ Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.2/ Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.5.1/ diff --git a/tools/default_image.c b/tools/default_image.c index cf5c0d4..18940af 100644 --- a/tools/default_image.c +++ b/tools/default_image.c @@ -88,6 +88,9 @@ static void image_set_header(void *ptr, struct stat *sbuf, int ifd, struct image_tool_params *params) { uint32_t checksum; + char *source_date_epoch; + struct tm *time_universal; + time_t time; image_header_t * hdr = (image_header_t *)ptr; @@ -96,9 +99,25 @@ static void image_set_header(void *ptr, struct stat *sbuf, int ifd, sizeof(image_header_t)), sbuf->st_size - sizeof(image_header_t)); + source_date_epoch = getenv("SOURCE_DATE_EPOCH"); + if (source_date_epoch != NULL) { + time = (time_t) strtol(source_date_epoch, NULL, 10); + + time_universal = gmtime(&time); + if (time_universal == NULL) { + fprintf(stderr, "%s: SOURCE_DATE_EPOCH is not valid\n", + __func__); + time = 0; + } else { + time = mktime(time_universal); + } + } else { + time = sbuf->st_mtime; + } + /* Build new header */ image_set_magic(hdr, IH_MAGIC); - image_set_time(hdr, sbuf->st_mtime); + image_set_time(hdr, time); image_set_size(hdr, sbuf->st_size - sizeof(image_header_t)); image_set_load(hdr, params->addr); image_set_ep(hdr, params->ep); diff --git a/tools/fdtgrep.c b/tools/fdtgrep.c new file mode 100644 index 0000000..caaf600 --- /dev/null +++ b/tools/fdtgrep.c @@ -0,0 +1,1234 @@ +/* + * Copyright (c) 2013, Google Inc. + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Perform a grep of an FDT either displaying the source subset or producing + * a new .dtb subset which can be used as required. + */ + +#include <assert.h> +#include <ctype.h> +#include <getopt.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> + +#include <../include/libfdt.h> +#include <libfdt_internal.h> + +/* Define DEBUG to get some debugging output on stderr */ +#ifdef DEBUG +#define debug(a, b...) fprintf(stderr, a, ## b) +#else +#define debug(a, b...) +#endif + +/* A linked list of values we are grepping for */ +struct value_node { + int type; /* Types this value matches (FDT_IS... mask) */ + int include; /* 1 to include matches, 0 to exclude */ + const char *string; /* String to match */ + struct value_node *next; /* Pointer to next node, or NULL */ +}; + +/* Output formats we support */ +enum output_t { + OUT_DTS, /* Device tree source */ + OUT_DTB, /* Valid device tree binary */ + OUT_BIN, /* Fragment of .dtb, for hashing */ +}; + +/* Holds information which controls our output and options */ +struct display_info { + enum output_t output; /* Output format */ + int add_aliases; /* Add aliases node to output */ + int all; /* Display all properties/nodes */ + int colour; /* Display output in ANSI colour */ + int region_list; /* Output a region list */ + int flags; /* Flags (FDT_REG_...) */ + int list_strings; /* List strings in string table */ + int show_offset; /* Show offset */ + int show_addr; /* Show address */ + int header; /* Output an FDT header */ + int diff; /* Show +/- diff markers */ + int include_root; /* Include the root node and all properties */ + int remove_strings; /* Remove unused strings */ + int show_dts_version; /* Put '/dts-v1/;' on the first line */ + int types_inc; /* Mask of types that we include (FDT_IS...) */ + int types_exc; /* Mask of types that we exclude (FDT_IS...) */ + int invert; /* Invert polarity of match */ + struct value_node *value_head; /* List of values to match */ + const char *output_fname; /* Output filename */ + FILE *fout; /* File to write dts/dtb output */ +}; + +static void report_error(const char *where, int err) +{ + fprintf(stderr, "Error at '%s': %s\n", where, fdt_strerror(err)); +} + +/* Supported ANSI colours */ +enum { + COL_BLACK, + COL_RED, + COL_GREEN, + COL_YELLOW, + COL_BLUE, + COL_MAGENTA, + COL_CYAN, + COL_WHITE, + + COL_NONE = -1, +}; + +/** + * print_ansi_colour() - Print out the ANSI sequence for a colour + * + * @fout: Output file + * @col: Colour to output (COL_...), or COL_NONE to reset colour + */ +static void print_ansi_colour(FILE *fout, int col) +{ + if (col == COL_NONE) + fprintf(fout, "\033[0m"); + else + fprintf(fout, "\033[1;%dm", col + 30); +} + + +/** + * value_add() - Add a new value to our list of things to grep for + * + * @disp: Display structure, holding info about our options + * @headp: Pointer to header pointer of list + * @type: Type of this value (FDT_IS_...) + * @include: 1 if we want to include matches, 0 to exclude + * @str: String value to match + */ +static int value_add(struct display_info *disp, struct value_node **headp, + int type, int include, const char *str) +{ + struct value_node *node; + + /* + * Keep track of which types we are excluding/including. We don't + * allow both including and excluding things, because it doesn't make + * sense. 'Including' means that everything not mentioned is + * excluded. 'Excluding' means that everything not mentioned is + * included. So using the two together would be meaningless. + */ + if (include) + disp->types_inc |= type; + else + disp->types_exc |= type; + if (disp->types_inc & disp->types_exc & type) { + fprintf(stderr, + "Cannot use both include and exclude for '%s'\n", str); + return -1; + } + + str = strdup(str); + node = malloc(sizeof(*node)); + if (!str || !node) { + fprintf(stderr, "Out of memory\n"); + return -1; + } + node->next = *headp; + node->type = type; + node->include = include; + node->string = str; + *headp = node; + + return 0; +} + +static bool util_is_printable_string(const void *data, int len) +{ + const char *s = data; + const char *ss, *se; + + /* zero length is not */ + if (len == 0) + return 0; + + /* must terminate with zero */ + if (s[len - 1] != '\0') + return 0; + + se = s + len; + + while (s < se) { + ss = s; + while (s < se && *s && isprint((unsigned char)*s)) + s++; + + /* not zero, or not done yet */ + if (*s != '\0' || s == ss) + return 0; + + s++; + } + + return 1; +} + +static void utilfdt_print_data(const char *data, int len) +{ + int i; + const char *p = data; + const char *s; + + /* no data, don't print */ + if (len == 0) + return; + + if (util_is_printable_string(data, len)) { + printf(" = "); + + s = data; + do { + printf("\"%s\"", s); + s += strlen(s) + 1; + if (s < data + len) + printf(", "); + } while (s < data + len); + + } else if ((len % 4) == 0) { + const uint32_t *cell = (const uint32_t *)data; + + printf(" = <"); + for (i = 0, len /= 4; i < len; i++) + printf("0x%08x%s", fdt32_to_cpu(cell[i]), + i < (len - 1) ? " " : ""); + printf(">"); + } else { + printf(" = ["); + for (i = 0; i < len; i++) + printf("%02x%s", *p++, i < len - 1 ? " " : ""); + printf("]"); + } +} + +/** + * display_fdt_by_regions() - Display regions of an FDT source + * + * This dumps an FDT as source, but only certain regions of it. This is the + * final stage of the grep - we have a list of regions we want to display, + * and this function displays them. + * + * @disp: Display structure, holding info about our options + * @blob: FDT blob to display + * @region: List of regions to display + * @count: Number of regions + */ +static int display_fdt_by_regions(struct display_info *disp, const void *blob, + struct fdt_region region[], int count) +{ + struct fdt_region *reg = region, *reg_end = region + count; + uint32_t off_mem_rsvmap = fdt_off_mem_rsvmap(blob); + int base = fdt_off_dt_struct(blob); + int version = fdt_version(blob); + int offset, nextoffset; + int tag, depth, shift; + FILE *f = disp->fout; + uint64_t addr, size; + int in_region; + int file_ofs; + int i; + + if (disp->show_dts_version) + fprintf(f, "/dts-v1/;\n"); + + if (disp->header) { + fprintf(f, "// magic:\t\t0x%x\n", fdt_magic(blob)); + fprintf(f, "// totalsize:\t\t0x%x (%d)\n", fdt_totalsize(blob), + fdt_totalsize(blob)); + fprintf(f, "// off_dt_struct:\t0x%x\n", + fdt_off_dt_struct(blob)); + fprintf(f, "// off_dt_strings:\t0x%x\n", + fdt_off_dt_strings(blob)); + fprintf(f, "// off_mem_rsvmap:\t0x%x\n", off_mem_rsvmap); + fprintf(f, "// version:\t\t%d\n", version); + fprintf(f, "// last_comp_version:\t%d\n", + fdt_last_comp_version(blob)); + if (version >= 2) { + fprintf(f, "// boot_cpuid_phys:\t0x%x\n", + fdt_boot_cpuid_phys(blob)); + } + if (version >= 3) { + fprintf(f, "// size_dt_strings:\t0x%x\n", + fdt_size_dt_strings(blob)); + } + if (version >= 17) { + fprintf(f, "// size_dt_struct:\t0x%x\n", + fdt_size_dt_struct(blob)); + } + fprintf(f, "\n"); + } + + if (disp->flags & FDT_REG_ADD_MEM_RSVMAP) { + const struct fdt_reserve_entry *p_rsvmap; + + p_rsvmap = (const struct fdt_reserve_entry *) + ((const char *)blob + off_mem_rsvmap); + for (i = 0; ; i++) { + addr = fdt64_to_cpu(p_rsvmap[i].address); + size = fdt64_to_cpu(p_rsvmap[i].size); + if (addr == 0 && size == 0) + break; + + fprintf(f, "/memreserve/ %llx %llx;\n", + (unsigned long long)addr, + (unsigned long long)size); + } + } + + depth = 0; + nextoffset = 0; + shift = 4; /* 4 spaces per indent */ + do { + const struct fdt_property *prop; + const char *name; + int show; + int len; + + offset = nextoffset; + + /* + * Work out the file offset of this offset, and decide + * whether it is in the region list or not + */ + file_ofs = base + offset; + if (reg < reg_end && file_ofs >= reg->offset + reg->size) + reg++; + in_region = reg < reg_end && file_ofs >= reg->offset && + file_ofs < reg->offset + reg->size; + tag = fdt_next_tag(blob, offset, &nextoffset); + + if (tag == FDT_END) + break; + show = in_region || disp->all; + if (show && disp->diff) + fprintf(f, "%c", in_region ? '+' : '-'); + + if (!show) { + /* Do this here to avoid 'if (show)' in every 'case' */ + if (tag == FDT_BEGIN_NODE) + depth++; + else if (tag == FDT_END_NODE) + depth--; + continue; + } + if (tag != FDT_END) { + if (disp->show_addr) + fprintf(f, "%4x: ", file_ofs); + if (disp->show_offset) + fprintf(f, "%4x: ", file_ofs - base); + } + + /* Green means included, red means excluded */ + if (disp->colour) + print_ansi_colour(f, in_region ? COL_GREEN : COL_RED); + + switch (tag) { + case FDT_PROP: + prop = fdt_get_property_by_offset(blob, offset, NULL); + name = fdt_string(blob, fdt32_to_cpu(prop->nameoff)); + fprintf(f, "%*s%s", depth * shift, "", name); + utilfdt_print_data(prop->data, + fdt32_to_cpu(prop->len)); + fprintf(f, ";"); + break; + + case FDT_NOP: + fprintf(f, "%*s// [NOP]", depth * shift, ""); + break; + + case FDT_BEGIN_NODE: + name = fdt_get_name(blob, offset, &len); + fprintf(f, "%*s%s {", depth++ * shift, "", + *name ? name : "/"); + break; + + case FDT_END_NODE: + fprintf(f, "%*s};", --depth * shift, ""); + break; + } + + /* Reset colour back to normal before end of line */ + if (disp->colour) + print_ansi_colour(f, COL_NONE); + fprintf(f, "\n"); + } while (1); + + /* Print a list of strings if requested */ + if (disp->list_strings) { + const char *str; + int str_base = fdt_off_dt_strings(blob); + + for (offset = 0; offset < fdt_size_dt_strings(blob); + offset += strlen(str) + 1) { + str = fdt_string(blob, offset); + int len = strlen(str) + 1; + int show; + + /* Only print strings that are in the region */ + file_ofs = str_base + offset; + in_region = reg < reg_end && + file_ofs >= reg->offset && + file_ofs + len < reg->offset + + reg->size; + show = in_region || disp->all; + if (show && disp->diff) + printf("%c", in_region ? '+' : '-'); + if (disp->show_addr) + printf("%4x: ", file_ofs); + if (disp->show_offset) + printf("%4x: ", offset); + printf("%s\n", str); + } + } + + return 0; +} + +/** + * dump_fdt_regions() - Dump regions of an FDT as binary data + * + * This dumps an FDT as binary, but only certain regions of it. This is the + * final stage of the grep - we have a list of regions we want to dump, + * and this function dumps them. + * + * The output of this function may or may not be a valid FDT. To ensure it + * is, these disp->flags must be set: + * + * FDT_REG_SUPERNODES: ensures that subnodes are preceeded by their + * parents. Without this option, fragments of subnode data may be + * output without the supernodes above them. This is useful for + * hashing but cannot produce a valid FDT. + * FDT_REG_ADD_STRING_TAB: Adds a string table to the end of the FDT. + * Without this none of the properties will have names + * FDT_REG_ADD_MEM_RSVMAP: Adds a mem_rsvmap table - an FDT is invalid + * without this. + * + * @disp: Display structure, holding info about our options + * @blob: FDT blob to display + * @region: List of regions to display + * @count: Number of regions + * @out: Output destination + */ +static int dump_fdt_regions(struct display_info *disp, const void *blob, + struct fdt_region region[], int count, char *out) +{ + struct fdt_header *fdt; + int size, struct_start; + int ptr; + int i; + + /* Set up a basic header (even if we don't actually write it) */ + fdt = (struct fdt_header *)out; + memset(fdt, '\0', sizeof(*fdt)); + fdt_set_magic(fdt, FDT_MAGIC); + struct_start = FDT_ALIGN(sizeof(struct fdt_header), + sizeof(struct fdt_reserve_entry)); + fdt_set_off_mem_rsvmap(fdt, struct_start); + fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION); + fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION); + + /* + * Calculate the total size of the regions we are writing out. The + * first will be the mem_rsvmap if the FDT_REG_ADD_MEM_RSVMAP flag + * is set. The last will be the string table if FDT_REG_ADD_STRING_TAB + * is set. + */ + for (i = size = 0; i < count; i++) + size += region[i].size; + + /* Bring in the mem_rsvmap section from the old file if requested */ + if (count > 0 && (disp->flags & FDT_REG_ADD_MEM_RSVMAP)) { + struct_start += region[0].size; + size -= region[0].size; + } + fdt_set_off_dt_struct(fdt, struct_start); + + /* Update the header to have the correct offsets/sizes */ + if (count >= 2 && (disp->flags & FDT_REG_ADD_STRING_TAB)) { + int str_size; + + str_size = region[count - 1].size; + fdt_set_size_dt_struct(fdt, size - str_size); + fdt_set_off_dt_strings(fdt, struct_start + size - str_size); + fdt_set_size_dt_strings(fdt, str_size); + fdt_set_totalsize(fdt, struct_start + size); + } + + /* Write the header if required */ + ptr = 0; + if (disp->header) { + ptr = sizeof(*fdt); + while (ptr < fdt_off_mem_rsvmap(fdt)) + out[ptr++] = '\0'; + } + + /* Output all the nodes including any mem_rsvmap/string table */ + for (i = 0; i < count; i++) { + struct fdt_region *reg = ®ion[i]; + + memcpy(out + ptr, (const char *)blob + reg->offset, reg->size); + ptr += reg->size; + } + + return ptr; +} + +/** + * show_region_list() - Print out a list of regions + * + * The list includes the region offset (absolute offset from start of FDT + * blob in bytes) and size + * + * @reg: List of regions to print + * @count: Number of regions + */ +static void show_region_list(struct fdt_region *reg, int count) +{ + int i; + + printf("Regions: %d\n", count); + for (i = 0; i < count; i++, reg++) { + printf("%d: %-10x %-10x\n", i, reg->offset, + reg->offset + reg->size); + } +} + +static int check_type_include(void *priv, int type, const char *data, int size) +{ + struct display_info *disp = priv; + struct value_node *val; + int match, none_match = FDT_IS_ANY; + + /* If none of our conditions mention this type, we know nothing */ + debug("type=%x, data=%s\n", type, data ? data : "(null)"); + if (!((disp->types_inc | disp->types_exc) & type)) { + debug(" - not in any condition\n"); + return -1; + } + + /* + * Go through the list of conditions. For inclusive conditions, we + * return 1 at the first match. For exclusive conditions, we must + * check that there are no matches. + */ + for (val = disp->value_head; val; val = val->next) { + if (!(type & val->type)) + continue; + match = fdt_stringlist_contains(data, size, val->string); + debug(" - val->type=%x, str='%s', match=%d\n", + val->type, val->string, match); + if (match && val->include) { + debug(" - match inc %s\n", val->string); + return 1; + } + if (match) + none_match &= ~val->type; + } + + /* + * If this is an exclusive condition, and nothing matches, then we + * should return 1. + */ + if ((type & disp->types_exc) && (none_match & type)) { + debug(" - match exc\n"); + /* + * Allow FDT_IS_COMPAT to make the final decision in the + * case where there is no specific type + */ + if (type == FDT_IS_NODE && disp->types_exc == FDT_ANY_GLOBAL) { + debug(" - supressed exc node\n"); + return -1; + } + return 1; + } + + /* + * Allow FDT_IS_COMPAT to make the final decision in the + * case where there is no specific type (inclusive) + */ + if (type == FDT_IS_NODE && disp->types_inc == FDT_ANY_GLOBAL) + return -1; + + debug(" - no match, types_inc=%x, types_exc=%x, none_match=%x\n", + disp->types_inc, disp->types_exc, none_match); + + return 0; +} + +/** + * h_include() - Include handler function for fdt_find_regions() + * + * This function decides whether to include or exclude a node, property or + * compatible string. The function is defined by fdt_find_regions(). + * + * The algorithm is documented in the code - disp->invert is 0 for normal + * operation, and 1 to invert the sense of all matches. + * + * See + */ +static int h_include(void *priv, const void *fdt, int offset, int type, + const char *data, int size) +{ + struct display_info *disp = priv; + int inc, len; + + inc = check_type_include(priv, type, data, size); + if (disp->include_root && type == FDT_IS_PROP && offset == 0 && inc) + return 1; + + /* + * If the node name does not tell us anything, check the + * compatible string + */ + if (inc == -1 && type == FDT_IS_NODE) { + debug(" - checking compatible2\n"); + data = fdt_getprop(fdt, offset, "compatible", &len); + inc = check_type_include(priv, FDT_IS_COMPAT, data, len); + } + + /* If we still have no idea, check for properties in the node */ + if (inc != 1 && type == FDT_IS_NODE && + (disp->types_inc & FDT_NODE_HAS_PROP)) { + debug(" - checking node '%s'\n", + fdt_get_name(fdt, offset, NULL)); + for (offset = fdt_first_property_offset(fdt, offset); + offset > 0 && inc != 1; + offset = fdt_next_property_offset(fdt, offset)) { + const struct fdt_property *prop; + const char *str; + + prop = fdt_get_property_by_offset(fdt, offset, NULL); + if (!prop) + continue; + str = fdt_string(fdt, fdt32_to_cpu(prop->nameoff)); + inc = check_type_include(priv, FDT_NODE_HAS_PROP, str, + strlen(str)); + } + if (inc == -1) + inc = 0; + } + + switch (inc) { + case 1: + inc = !disp->invert; + break; + case 0: + inc = disp->invert; + break; + } + debug(" - returning %d\n", inc); + + return inc; +} + +static int h_cmp_region(const void *v1, const void *v2) +{ + const struct fdt_region *region1 = v1, *region2 = v2; + + return region1->offset - region2->offset; +} + +static int fdtgrep_find_regions(const void *fdt, + int (*include_func)(void *priv, const void *fdt, int offset, + int type, const char *data, int size), + struct display_info *disp, struct fdt_region *region, + int max_regions, char *path, int path_len, int flags) +{ + struct fdt_region_state state; + int count; + int ret; + + count = 0; + ret = fdt_first_region(fdt, include_func, disp, + ®ion[count++], path, path_len, + disp->flags, &state); + while (ret == 0) { + ret = fdt_next_region(fdt, include_func, disp, + count < max_regions ? ®ion[count] : NULL, + path, path_len, disp->flags, &state); + if (!ret) + count++; + } + + /* Find all the aliases and add those regions back in */ + if (disp->add_aliases && count < max_regions) { + int new_count; + + new_count = fdt_add_alias_regions(fdt, region, count, + max_regions, &state); + if (new_count > max_regions) { + region = malloc(new_count * sizeof(struct fdt_region)); + if (!region) { + fprintf(stderr, + "Out of memory for %d regions\n", + count); + return -1; + } + memcpy(region, state.region, + count * sizeof(struct fdt_region)); + free(state.region); + new_count = fdt_add_alias_regions(fdt, region, count, + max_regions, &state); + } + + /* + * The alias regions will now be at the end of the list. Sort + * the regions by offset to get things into the right order + */ + qsort(region, new_count, sizeof(struct fdt_region), + h_cmp_region); + count = new_count; + } + + if (ret != -FDT_ERR_NOTFOUND) + return ret; + + return count; +} + +int utilfdt_read_err_len(const char *filename, char **buffp, off_t *len) +{ + int fd = 0; /* assume stdin */ + char *buf = NULL; + off_t bufsize = 1024, offset = 0; + int ret = 0; + + *buffp = NULL; + if (strcmp(filename, "-") != 0) { + fd = open(filename, O_RDONLY); + if (fd < 0) + return errno; + } + + /* Loop until we have read everything */ + buf = malloc(bufsize); + if (!buf) + return -ENOMEM; + do { + /* Expand the buffer to hold the next chunk */ + if (offset == bufsize) { + bufsize *= 2; + buf = realloc(buf, bufsize); + if (!buf) + return -ENOMEM; + } + + ret = read(fd, &buf[offset], bufsize - offset); + if (ret < 0) { + ret = errno; + break; + } + offset += ret; + } while (ret != 0); + + /* Clean up, including closing stdin; return errno on error */ + close(fd); + if (ret) + free(buf); + else + *buffp = buf; + *len = bufsize; + return ret; +} + +int utilfdt_read_err(const char *filename, char **buffp) +{ + off_t len; + return utilfdt_read_err_len(filename, buffp, &len); +} + +char *utilfdt_read_len(const char *filename, off_t *len) +{ + char *buff; + int ret = utilfdt_read_err_len(filename, &buff, len); + + if (ret) { + fprintf(stderr, "Couldn't open blob from '%s': %s\n", filename, + strerror(ret)); + return NULL; + } + /* Successful read */ + return buff; +} + +char *utilfdt_read(const char *filename) +{ + off_t len; + return utilfdt_read_len(filename, &len); +} + +/** + * Run the main fdtgrep operation, given a filename and valid arguments + * + * @param disp Display information / options + * @param filename Filename of blob file + * @param return 0 if ok, -ve on error + */ +static int do_fdtgrep(struct display_info *disp, const char *filename) +{ + struct fdt_region *region; + int max_regions; + int count = 100; + char path[1024]; + char *blob; + int i, ret; + + blob = utilfdt_read(filename); + if (!blob) + return -1; + ret = fdt_check_header(blob); + if (ret) { + fprintf(stderr, "Error: %s\n", fdt_strerror(ret)); + return ret; + } + + /* Allow old files, but they are untested */ + if (fdt_version(blob) < 17 && disp->value_head) { + fprintf(stderr, + "Warning: fdtgrep does not fully support version %d files\n", + fdt_version(blob)); + } + + /* + * We do two passes, since we don't know how many regions we need. + * The first pass will count the regions, but if it is too many, + * we do another pass to actually record them. + */ + for (i = 0; i < 2; i++) { + region = malloc(count * sizeof(struct fdt_region)); + if (!region) { + fprintf(stderr, "Out of memory for %d regions\n", + count); + return -1; + } + max_regions = count; + count = fdtgrep_find_regions(blob, + h_include, disp, + region, max_regions, path, sizeof(path), + disp->flags); + if (count < 0) { + report_error("fdt_find_regions", count); + return -1; + } + if (count <= max_regions) + break; + free(region); + } + + /* Optionally print a list of regions */ + if (disp->region_list) + show_region_list(region, count); + + /* Output either source .dts or binary .dtb */ + if (disp->output == OUT_DTS) { + ret = display_fdt_by_regions(disp, blob, region, count); + } else { + void *fdt; + /* Allow reserved memory section to expand slightly */ + int size = fdt_totalsize(blob) + 16; + + fdt = malloc(size); + if (!fdt) { + fprintf(stderr, "Out_of_memory\n"); + ret = -1; + goto err; + } + size = dump_fdt_regions(disp, blob, region, count, fdt); + if (disp->remove_strings) { + void *out; + + out = malloc(size); + if (!out) { + fprintf(stderr, "Out_of_memory\n"); + ret = -1; + goto err; + } + ret = fdt_remove_unused_strings(fdt, out); + if (ret < 0) { + fprintf(stderr, + "Failed to remove unused strings: err=%d\n", + ret); + goto err; + } + free(fdt); + fdt = out; + ret = fdt_pack(fdt); + if (ret < 0) { + fprintf(stderr, "Failed to pack: err=%d\n", + ret); + goto err; + } + size = fdt_totalsize(fdt); + } + + if (size != fwrite(fdt, 1, size, disp->fout)) { + fprintf(stderr, "Write failure, %d bytes\n", size); + free(fdt); + ret = 1; + goto err; + } + free(fdt); + } +err: + free(blob); + free(region); + + return ret; +} + +static const char usage_synopsis[] = + "fdtgrep - extract portions from device tree\n" + "\n" + "Usage:\n" + " fdtgrep <options> <dt file>|-\n\n" + "Output formats are:\n" + "\tdts - device tree soure text\n" + "\tdtb - device tree blob (sets -Hmt automatically)\n" + "\tbin - device tree fragment (may not be a valid .dtb)"; + +/* Helper for usage_short_opts string constant */ +#define USAGE_COMMON_SHORT_OPTS "hV" + +/* Helper for aligning long_opts array */ +#define a_argument required_argument + +/* Helper for usage_long_opts option array */ +#define USAGE_COMMON_LONG_OPTS \ + {"help", no_argument, NULL, 'h'}, \ + {"version", no_argument, NULL, 'V'}, \ + {NULL, no_argument, NULL, 0x0} + +/* Helper for usage_opts_help array */ +#define USAGE_COMMON_OPTS_HELP \ + "Print this help and exit", \ + "Print version and exit", \ + NULL + +/* Helper for getopt case statements */ +#define case_USAGE_COMMON_FLAGS \ + case 'h': usage(NULL); \ + case 'V': util_version(); \ + case '?': usage("unknown option"); + +static const char usage_short_opts[] = + "haAc:b:C:defg:G:HIlLmn:N:o:O:p:P:rRsStTv" + USAGE_COMMON_SHORT_OPTS; +static struct option const usage_long_opts[] = { + {"show-address", no_argument, NULL, 'a'}, + {"colour", no_argument, NULL, 'A'}, + {"include-node-with-prop", a_argument, NULL, 'b'}, + {"include-compat", a_argument, NULL, 'c'}, + {"exclude-compat", a_argument, NULL, 'C'}, + {"diff", no_argument, NULL, 'd'}, + {"enter-node", no_argument, NULL, 'e'}, + {"show-offset", no_argument, NULL, 'f'}, + {"include-match", a_argument, NULL, 'g'}, + {"exclude-match", a_argument, NULL, 'G'}, + {"show-header", no_argument, NULL, 'H'}, + {"show-version", no_argument, NULL, 'I'}, + {"list-regions", no_argument, NULL, 'l'}, + {"list-strings", no_argument, NULL, 'L'}, + {"include-mem", no_argument, NULL, 'm'}, + {"include-node", a_argument, NULL, 'n'}, + {"exclude-node", a_argument, NULL, 'N'}, + {"include-prop", a_argument, NULL, 'p'}, + {"exclude-prop", a_argument, NULL, 'P'}, + {"remove-strings", no_argument, NULL, 'r'}, + {"include-root", no_argument, NULL, 'R'}, + {"show-subnodes", no_argument, NULL, 's'}, + {"skip-supernodes", no_argument, NULL, 'S'}, + {"show-stringtab", no_argument, NULL, 't'}, + {"show-aliases", no_argument, NULL, 'T'}, + {"out", a_argument, NULL, 'o'}, + {"out-format", a_argument, NULL, 'O'}, + {"invert-match", no_argument, NULL, 'v'}, + USAGE_COMMON_LONG_OPTS, +}; +static const char * const usage_opts_help[] = { + "Display address", + "Show all nodes/tags, colour those that match", + "Include contains containing property", + "Compatible nodes to include in grep", + "Compatible nodes to exclude in grep", + "Diff: Mark matching nodes with +, others with -", + "Enter direct subnode names of matching nodes", + "Display offset", + "Node/property/compatible string to include in grep", + "Node/property/compatible string to exclude in grep", + "Output a header", + "Put \"/dts-v1/;\" on first line of dts output", + "Output a region list", + "List strings in string table", + "Include mem_rsvmap section in binary output", + "Node to include in grep", + "Node to exclude in grep", + "Property to include in grep", + "Property to exclude in grep", + "Remove unused strings from string table", + "Include root node and all properties", + "Show all subnodes matching nodes", + "Don't include supernodes of matching nodes", + "Include string table in binary output", + "Include matching aliases in output", + "-o <output file>", + "-O <output format>", + "Invert the sense of matching (select non-matching lines)", + USAGE_COMMON_OPTS_HELP +}; + +/** + * Call getopt_long() with standard options + * + * Since all util code runs getopt in the same way, provide a helper. + */ +#define util_getopt_long() getopt_long(argc, argv, usage_short_opts, \ + usage_long_opts, NULL) + +void util_usage(const char *errmsg, const char *synopsis, + const char *short_opts, struct option const long_opts[], + const char * const opts_help[]) +{ + FILE *fp = errmsg ? stderr : stdout; + const char a_arg[] = "<arg>"; + size_t a_arg_len = strlen(a_arg) + 1; + size_t i; + int optlen; + + fprintf(fp, + "Usage: %s\n" + "\n" + "Options: -[%s]\n", synopsis, short_opts); + + /* prescan the --long opt length to auto-align */ + optlen = 0; + for (i = 0; long_opts[i].name; ++i) { + /* +1 is for space between --opt and help text */ + int l = strlen(long_opts[i].name) + 1; + if (long_opts[i].has_arg == a_argument) + l += a_arg_len; + if (optlen < l) + optlen = l; + } + + for (i = 0; long_opts[i].name; ++i) { + /* helps when adding new applets or options */ + assert(opts_help[i] != NULL); + + /* first output the short flag if it has one */ + if (long_opts[i].val > '~') + fprintf(fp, " "); + else + fprintf(fp, " -%c, ", long_opts[i].val); + + /* then the long flag */ + if (long_opts[i].has_arg == no_argument) { + fprintf(fp, "--%-*s", optlen, long_opts[i].name); + } else { + fprintf(fp, "--%s %s%*s", long_opts[i].name, a_arg, + (int)(optlen - strlen(long_opts[i].name) - + a_arg_len), ""); + } + + /* finally the help text */ + fprintf(fp, "%s\n", opts_help[i]); + } + + if (errmsg) { + fprintf(fp, "\nError: %s\n", errmsg); + exit(EXIT_FAILURE); + } else { + exit(EXIT_SUCCESS); + } +} + +/** + * Show usage and exit + * + * If you name all your usage variables with usage_xxx, then you can call this + * help macro rather than expanding all arguments yourself. + * + * @param errmsg If non-NULL, an error message to display + */ +#define usage(errmsg) \ + util_usage(errmsg, usage_synopsis, usage_short_opts, \ + usage_long_opts, usage_opts_help) + +void util_version(void) +{ + printf("Version: %s\n", "(U-Boot)"); + exit(0); +} + +static void scan_args(struct display_info *disp, int argc, char *argv[]) +{ + int opt; + + while ((opt = util_getopt_long()) != EOF) { + int type = 0; + int inc = 1; + + switch (opt) { + case_USAGE_COMMON_FLAGS + case 'a': + disp->show_addr = 1; + break; + case 'A': + disp->all = 1; + break; + case 'b': + type = FDT_NODE_HAS_PROP; + break; + case 'C': + inc = 0; + /* no break */ + case 'c': + type = FDT_IS_COMPAT; + break; + case 'd': + disp->diff = 1; + break; + case 'e': + disp->flags |= FDT_REG_DIRECT_SUBNODES; + break; + case 'f': + disp->show_offset = 1; + break; + case 'G': + inc = 0; + /* no break */ + case 'g': + type = FDT_ANY_GLOBAL; + break; + case 'H': + disp->header = 1; + break; + case 'l': + disp->region_list = 1; + break; + case 'L': + disp->list_strings = 1; + break; + case 'm': + disp->flags |= FDT_REG_ADD_MEM_RSVMAP; + break; + case 'N': + inc = 0; + /* no break */ + case 'n': + type = FDT_IS_NODE; + break; + case 'o': + disp->output_fname = optarg; + break; + case 'O': + if (!strcmp(optarg, "dtb")) + disp->output = OUT_DTB; + else if (!strcmp(optarg, "dts")) + disp->output = OUT_DTS; + else if (!strcmp(optarg, "bin")) + disp->output = OUT_BIN; + else + usage("Unknown output format"); + break; + case 'P': + inc = 0; + /* no break */ + case 'p': + type = FDT_IS_PROP; + break; + case 'r': + disp->remove_strings = 1; + break; + case 'R': + disp->include_root = 1; + break; + case 's': + disp->flags |= FDT_REG_ALL_SUBNODES; + break; + case 'S': + disp->flags &= ~FDT_REG_SUPERNODES; + break; + case 't': + disp->flags |= FDT_REG_ADD_STRING_TAB; + break; + case 'T': + disp->add_aliases = 1; + break; + case 'v': + disp->invert = 1; + break; + case 'I': + disp->show_dts_version = 1; + break; + } + + if (type && value_add(disp, &disp->value_head, type, inc, + optarg)) + usage("Cannot add value"); + } + + if (disp->invert && disp->types_exc) + usage("-v has no meaning when used with 'exclude' conditions"); +} + +int main(int argc, char *argv[]) +{ + char *filename = NULL; + struct display_info disp; + int ret; + + /* set defaults */ + memset(&disp, '\0', sizeof(disp)); + disp.flags = FDT_REG_SUPERNODES; /* Default flags */ + + scan_args(&disp, argc, argv); + + /* Show matched lines in colour if we can */ + disp.colour = disp.all && isatty(0); + + /* Any additional arguments can match anything, just like -g */ + while (optind < argc - 1) { + if (value_add(&disp, &disp.value_head, FDT_IS_ANY, 1, + argv[optind++])) + usage("Cannot add value"); + } + + if (optind < argc) + filename = argv[optind++]; + if (!filename) + usage("Missing filename"); + + /* If a valid .dtb is required, set flags to ensure we get one */ + if (disp.output == OUT_DTB) { + disp.header = 1; + disp.flags |= FDT_REG_ADD_MEM_RSVMAP | FDT_REG_ADD_STRING_TAB; + } + + if (disp.output_fname) { + disp.fout = fopen(disp.output_fname, "w"); + if (!disp.fout) + usage("Cannot open output file"); + } else { + disp.fout = stdout; + } + + /* Run the grep and output the results */ + ret = do_fdtgrep(&disp, filename); + if (disp.output_fname) + fclose(disp.fout); + if (ret) + return 1; + + return 0; +} diff --git a/tools/imagetool.h b/tools/imagetool.h index b7874f4..99bbf2f 100644 --- a/tools/imagetool.h +++ b/tools/imagetool.h @@ -59,6 +59,7 @@ struct image_tool_params { const char *keydest; /* Destination .dtb for public key */ const char *comment; /* Comment to add to signature node */ int require_keys; /* 1 to mark signing keys as 'required' */ + int file_size; /* Total size of output file */ }; /* diff --git a/tools/kwbimage.c b/tools/kwbimage.c index 1ff17ca..3fa90d3 100644 --- a/tools/kwbimage.c +++ b/tools/kwbimage.c @@ -115,6 +115,7 @@ struct boot_mode boot_modes[] = { { 0x78, "sata" }, { 0x9C, "pex" }, { 0x69, "uart" }, + { 0xAE, "sdio" }, {}, }; @@ -420,15 +421,15 @@ static size_t image_headersz_v1(struct image_tool_params *params, *hasext = 1; } -#if defined(CONFIG_SYS_SPI_U_BOOT_OFFS) - if (headersz > CONFIG_SYS_SPI_U_BOOT_OFFS) { +#if defined(CONFIG_SYS_U_BOOT_OFFS) + if (headersz > CONFIG_SYS_U_BOOT_OFFS) { fprintf(stderr, "Error: Image header (incl. SPL image) too big!\n"); - fprintf(stderr, "header=0x%x CONFIG_SYS_SPI_U_BOOT_OFFS=0x%x!\n", - (int)headersz, CONFIG_SYS_SPI_U_BOOT_OFFS); - fprintf(stderr, "Increase CONFIG_SYS_SPI_U_BOOT_OFFS!\n"); + fprintf(stderr, "header=0x%x CONFIG_SYS_U_BOOT_OFFS=0x%x!\n", + (int)headersz, CONFIG_SYS_U_BOOT_OFFS); + fprintf(stderr, "Increase CONFIG_SYS_U_BOOT_OFFS!\n"); return 0; } else { - headersz = CONFIG_SYS_SPI_U_BOOT_OFFS; + headersz = CONFIG_SYS_U_BOOT_OFFS; } #endif diff --git a/tools/mkimage.c b/tools/mkimage.c index 5ccd951..e81d455 100644 --- a/tools/mkimage.c +++ b/tools/mkimage.c @@ -26,8 +26,48 @@ struct image_tool_params params = { .imagename2 = "", }; -int -main (int argc, char **argv) +static int h_compare_image_name(const void *vtype1, const void *vtype2) +{ + const int *type1 = vtype1; + const int *type2 = vtype2; + const char *name1 = genimg_get_type_short_name(*type1); + const char *name2 = genimg_get_type_short_name(*type2); + + return strcmp(name1, name2); +} + +/* Show all image types supported by mkimage */ +static void show_image_types(void) +{ + struct image_type_params *tparams; + int order[IH_TYPE_COUNT]; + int count; + int type; + int i; + + /* Sort the names in order of short name for easier reading */ + memset(order, '\0', sizeof(order)); + for (count = 0, type = 0; type < IH_TYPE_COUNT; type++) { + tparams = imagetool_get_type(type); + if (tparams) + order[count++] = type; + } + qsort(order, count, sizeof(int), h_compare_image_name); + + fprintf(stderr, "\nInvalid image type. Supported image types:\n"); + for (i = 0; i < count; i++) { + type = order[i]; + tparams = imagetool_get_type(type); + if (tparams) { + fprintf(stderr, "\t%-15s %s\n", + genimg_get_type_short_name(type), + genimg_get_type_name(type)); + } + } + fprintf(stderr, "\n"); +} + +int main(int argc, char **argv) { int ifd = -1; struct stat sbuf; @@ -35,6 +75,7 @@ main (int argc, char **argv) int retval = 0; struct image_type_params *tparams = NULL; int pad_len = 0; + int dfd; params.cmdname = *argv; params.addr = params.ep = 0; @@ -75,12 +116,16 @@ main (int argc, char **argv) usage (); goto NXTARG; case 'T': - if ((--argc <= 0) || - (params.type = - genimg_get_type_id (*++argv)) < 0) - usage (); + params.type = -1; + if (--argc >= 0 && argv[1]) { + params.type = + genimg_get_type_id(*++argv); + } + if (params.type < 0) { + show_image_types(); + usage(); + } goto NXTARG; - case 'a': if (--argc <= 0) usage (); @@ -266,6 +311,22 @@ NXTARG: ; exit (retval); } + dfd = open(params.datafile, O_RDONLY | O_BINARY); + if (dfd < 0) { + fprintf(stderr, "%s: Can't open %s: %s\n", + params.cmdname, params.datafile, strerror(errno)); + exit(EXIT_FAILURE); + } + + if (fstat(dfd, &sbuf) < 0) { + fprintf(stderr, "%s: Can't stat %s: %s\n", + params.cmdname, params.datafile, strerror(errno)); + exit(EXIT_FAILURE); + } + + params.file_size = sbuf.st_size + tparams->header_size; + close(dfd); + /* * In case there an header with a variable * length will be added, the corresponding @@ -365,6 +426,7 @@ NXTARG: ; params.cmdname, params.imagefile, strerror(errno)); exit (EXIT_FAILURE); } + params.file_size = sbuf.st_size; ptr = mmap(0, sbuf.st_size, PROT_READ|PROT_WRITE, MAP_SHARED, ifd, 0); if (ptr == MAP_FAILED) { @@ -546,6 +608,7 @@ static void usage(void) #endif fprintf (stderr, " %s -V ==> print version information and exit\n", params.cmdname); + fprintf(stderr, "Use -T to see a list of available image types\n"); exit (EXIT_FAILURE); } diff --git a/tools/mpc86x_clk.c b/tools/mpc86x_clk.c deleted file mode 100644 index 9f662f7..0000000 --- a/tools/mpc86x_clk.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * (C) Copyright 2003 Intracom S.A. - * Pantelis Antoniou <panto@intracom.gr> - * - * This little program makes an exhaustive search for the - * correct terms of pdf, mfi, mfn, mfd, s, dbrmo, in PLPRCR. - * The goal is to produce a gclk2 from a xin input, while respecting - * all the restrictions on their combination. - * - * Generaly you select the first row of the produced table. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include <stdio.h> -#include <stdlib.h> - -#define DPREF_MIN 10000000 -#define DPREF_MAX 32000000 - -#define DPGDCK_MAX 320000000 -#define DPGDCK_MIN 160000000 - -#define S_MIN 0 -#define S_MAX 2 - -#define MFI_MIN 5 -#define MFI_MAX 15 - -#define MFN_MIN 0 -#define MFN_MAX 15 - -#define MFD_MIN 0 -#define MFD_MAX 31 - -#define MF_MIN 5 -#define MF_MAX 15 - -#define PDF_MIN 0 -#define PDF_MAX 15 - -#define GCLK2_MAX 150000000 - -static int calculate (int xin, int target_clock, - int ppm, int pdf, int mfi, int mfn, int mfd, int s, - int *dprefp, int *dpgdckp, int *jdbckp, - int *gclk2p, int *dbrmop) -{ - unsigned int dpref, dpgdck, jdbck, gclk2, t1, t2, dbrmo; - - /* valid MFI? */ - if (mfi < MFI_MIN) - return -1; - - /* valid num, denum? */ - if (mfn > 0 && mfn >= mfd) - return -1; - - dpref = xin / (pdf + 1); - - /* valid dpef? */ - if (dpref < DPREF_MIN || dpref > DPREF_MAX) - return -1; - - if (mfn == 0) { - dpgdck = (2 * mfi * xin) / (pdf + 1) ; - dbrmo = 0; - } else { - /* 5 <= mfi + (mfn / mfd + 1) <= 15 */ - t1 = mfd + 1; - t2 = mfi * t1 + mfn; - if ( MF_MIN * t1 > t2 || MF_MAX * t1 < t2) - return -1; - - dpgdck = (unsigned int)(2 * (mfi * mfd + mfi + mfn) * - (unsigned int)xin) / - ((mfd + 1) * (pdf + 1)); - - dbrmo = 10 * mfn < (mfd + 1); - } - - /* valid dpgclk? */ - if (dpgdck < DPGDCK_MIN || dpgdck > DPGDCK_MAX) - return -1; - - jdbck = dpgdck >> s; - gclk2 = jdbck / 2; - - /* valid gclk2 */ - if (gclk2 > GCLK2_MAX) - return -1; - - t1 = abs(gclk2 - target_clock); - - /* XXX max 1MHz dev. in clock */ - if (t1 > 1000000) - return -1; - - /* dev within range (XXX gclk2 scaled to avoid overflow) */ - if (t1 * 1000 > (unsigned int)ppm * (gclk2 / 1000)) - return -1; - - *dprefp = dpref; - *dpgdckp = dpgdck; - *jdbckp = jdbck; - *gclk2p = gclk2; - *dbrmop = dbrmo; - - return gclk2; -} - -int conf_clock(int xin, int target_clock, int ppm) -{ - int pdf, s, mfn, mfd, mfi; - int dpref, dpgdck, jdbck, gclk2, xout, dbrmo; - int found = 0; - - /* integer multipliers */ - for (pdf = PDF_MIN; pdf <= PDF_MAX; pdf++) { - for (mfi = MFI_MIN; mfi <= MFI_MAX; mfi++) { - for (s = 0; s <= S_MAX; s++) { - xout = calculate(xin, target_clock, - ppm, pdf, mfi, 0, 0, s, - &dpref, &dpgdck, &jdbck, - &gclk2, &dbrmo); - if (xout < 0) - continue; - - if (found == 0) { - printf("pdf mfi mfn mfd s dbrmo dpref dpgdck jdbck gclk2 exact?\n"); - printf("--- --- --- --- - ----- ----- ------ ----- ----- ------\n"); - } - - printf("%3d %3d --- --- %1d %5d %9d %9d %9d %9d%s\n", - pdf, mfi, s, dbrmo, - dpref, dpgdck, jdbck, gclk2, - gclk2 == target_clock ? " YES" : ""); - - found++; - } - } - } - - /* fractional multipliers */ - for (pdf = PDF_MIN; pdf <= PDF_MAX; pdf++) { - for (mfi = MFI_MIN; mfi <= MFI_MAX; mfi++) { - for (mfn = 1; mfn <= MFN_MAX; mfn++) { - for (mfd = 1; mfd <= MFD_MAX; mfd++) { - for (s = 0; s <= S_MAX; s++) { - xout = calculate(xin, target_clock, - ppm, pdf, mfi, mfn, mfd, s, - &dpref, &dpgdck, &jdbck, - &gclk2, &dbrmo); - if (xout < 0) - continue; - - if (found == 0) { - printf("pdf mfi mfn mfd s dbrmo dpref dpgdck jdbck gclk2 exact?\n"); - printf("--- --- --- --- - ----- ----- ------ ----- ----- ------\n"); - } - - printf("%3d %3d %3d %3d %1d %5d %9d %9d %9d %9d%s\n", - pdf, mfi, mfn, mfd, s, - dbrmo, dpref, dpgdck, jdbck, gclk2, - gclk2 == target_clock ? " YES" : ""); - - found++; - } - } - } - - } - } - - return found; -} - -int main(int argc, char *argv[]) -{ - int xin, want_gclk2, found, ppm = 100; - - if (argc < 3) { - fprintf(stderr, "usage: mpc86x_clk <xin> <want_gclk2> [ppm]\n"); - fprintf(stderr, " default ppm is 100\n"); - return 10; - } - - xin = atoi(argv[1]); - want_gclk2 = atoi(argv[2]); - if (argc >= 4) - ppm = atoi(argv[3]); - - found = conf_clock(xin, want_gclk2, ppm); - if (found <= 0) { - fprintf(stderr, "cannot produce gclk2 %d from xin %d\n", - want_gclk2, xin); - return EXIT_FAILURE; - } - - return EXIT_SUCCESS; -} diff --git a/tools/patman/README b/tools/patman/README index 27ec90a..5bd74c4 100644 --- a/tools/patman/README +++ b/tools/patman/README @@ -135,6 +135,17 @@ Similar to the above, but skip the first commit and take the next 5. This is useful if your top commit is for setting up testing. +How to install it +================= + +The most up to date version of patman can be found in the U-boot sources. +However to use it on other projects it may be more convenient to install it as +a standalone application. A distutils installer is included, this can be used +to install patman: + +$ cd tools/patman && python setup.py install + + How to add tags =============== diff --git a/tools/patman/__init__.py b/tools/patman/__init__.py new file mode 100644 index 0000000..7cbe5fa --- /dev/null +++ b/tools/patman/__init__.py @@ -0,0 +1,3 @@ +__all__ = ['checkpatch', 'command', 'commit', 'cros_subprocess', + 'get_maintainer', 'gitutil', 'patchstream', 'project', + 'series', 'settings', 'terminal', 'test'] diff --git a/tools/patman/patman.py b/tools/patman/patman.py index 6c6473e..6fe8fe0 100755 --- a/tools/patman/patman.py +++ b/tools/patman/patman.py @@ -14,14 +14,18 @@ import sys import unittest # Our modules -import checkpatch -import command -import gitutil -import patchstream -import project -import settings -import terminal -import test +try: + from patman import checkpatch, command, gitutil, patchstream, \ + project, settings, terminal, test +except ImportError: + import checkpatch + import command + import gitutil + import patchstream + import project + import settings + import terminal + import test parser = OptionParser() @@ -70,8 +74,11 @@ specified by tags you place in the commits. Use -n to do a dry run first.""" settings.Setup(parser, options.project, '') (options, args) = parser.parse_args() +if __name__ != "__main__": + pass + # Run our meagre tests -if options.test: +elif options.test: import doctest sys.argv = [sys.argv[0]] diff --git a/tools/patman/setup.py b/tools/patman/setup.py new file mode 100644 index 0000000..e61804f --- /dev/null +++ b/tools/patman/setup.py @@ -0,0 +1,13 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# +from distutils.core import setup +setup(name='patman', + version='1.0', + license='GPL-2.0+', + scripts=['patman'], + packages=['patman'], + package_dir={'patman': ''}, + package_data={'patman': ['README']}, + classifiers=['Environment :: Console', + 'Topic :: Software Development']) |