summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rwxr-xr-xMAKEALL1
-rw-r--r--Makefile1
-rw-r--r--board/freescale/mpc8569mds/config.mk9
-rw-r--r--board/freescale/mpc8569mds/tlb.c11
-rw-r--r--common/env_nand.c7
-rw-r--r--cpu/arm926ejs/start.S42
-rw-r--r--drivers/mtd/nand/mxc_nand.c617
-rw-r--r--include/configs/MPC8569MDS.h64
-rw-r--r--include/fsl_nfc.h86
-rw-r--r--nand_spl/board/freescale/mpc8569mds/Makefile133
-rw-r--r--nand_spl/board/freescale/mpc8569mds/nand_boot.c75
-rw-r--r--nand_spl/nand_boot_fsl_nfc.c72
12 files changed, 1016 insertions, 102 deletions
diff --git a/MAKEALL b/MAKEALL
index 7047e46..684db67 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -403,6 +403,7 @@ LIST_85xx=" \
MPC8568MDS \
MPC8569MDS \
MPC8569MDS_ATM \
+ MPC8569MDS_NAND \
MPC8572DS \
MPC8572DS_36BIT \
P2020DS \
diff --git a/Makefile b/Makefile
index 62fa1df..e4431f7 100644
--- a/Makefile
+++ b/Makefile
@@ -2487,6 +2487,7 @@ MPC8568MDS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
MPC8569MDS_ATM_config \
+MPC8569MDS_NAND_config \
MPC8569MDS_config: unconfig
@$(MKCONFIG) -t $(@:_config=) MPC8569MDS ppc mpc85xx mpc8569mds freescale
diff --git a/board/freescale/mpc8569mds/config.mk b/board/freescale/mpc8569mds/config.mk
index 962f79b..7de0f7c 100644
--- a/board/freescale/mpc8569mds/config.mk
+++ b/board/freescale/mpc8569mds/config.mk
@@ -23,4 +23,13 @@
#
# mpc8569mds board
#
+ifndef NAND_SPL
+ifeq ($(CONFIG_MK_NAND), y)
+TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+LDSCRIPT := $(TOPDIR)/cpu/$(CPU)/u-boot-nand.lds
+endif
+endif
+
+ifndef TEXT_BASE
TEXT_BASE = 0xfff80000
+endif
diff --git a/board/freescale/mpc8569mds/tlb.c b/board/freescale/mpc8569mds/tlb.c
index 3b8ee05..73dcc3e 100644
--- a/board/freescale/mpc8569mds/tlb.c
+++ b/board/freescale/mpc8569mds/tlb.c
@@ -90,6 +90,17 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 4, BOOKE_PAGESZ_64M, 1),
+
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
+ /* *I*G - L2SRAM */
+ SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_256K, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
+ CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 6, BOOKE_PAGESZ_256K, 1),
+#endif
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/common/env_nand.c b/common/env_nand.c
index ca631af..a15a950 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -298,6 +298,13 @@ void env_relocate_spec (void)
tmp_env1 = (env_t *) malloc(CONFIG_ENV_SIZE);
tmp_env2 = (env_t *) malloc(CONFIG_ENV_SIZE);
+ if ((tmp_env1 == NULL) || (tmp_env2 == NULL)) {
+ puts("Can't allocate buffers for environment\n");
+ free (tmp_env1);
+ free (tmp_env2);
+ return use_default();
+ }
+
if (readenv(CONFIG_ENV_OFFSET, (u_char *) tmp_env1))
puts("No Valid Environment Area Found\n");
if (readenv(CONFIG_ENV_OFFSET_REDUND, (u_char *) tmp_env2))
diff --git a/cpu/arm926ejs/start.S b/cpu/arm926ejs/start.S
index 4421b6a..3b81151 100644
--- a/cpu/arm926ejs/start.S
+++ b/cpu/arm926ejs/start.S
@@ -53,6 +53,27 @@
.globl _start
_start:
b reset
+#ifdef CONFIG_PRELOADER
+/* No exception handlers in preloader */
+ ldr pc, _hang
+ ldr pc, _hang
+ ldr pc, _hang
+ ldr pc, _hang
+ ldr pc, _hang
+ ldr pc, _hang
+ ldr pc, _hang
+
+_hang:
+ .word do_hang
+/* pad to 64 byte boundary */
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+#else
ldr pc, _undefined_instruction
ldr pc, _software_interrupt
ldr pc, _prefetch_abort
@@ -76,6 +97,7 @@ _irq:
_fiq:
.word fiq
+#endif /* CONFIG_PRELOADER */
.balignl 16,0xdeadbeef
@@ -150,7 +172,6 @@ relocate: /* relocate U-Boot to RAM */
ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
cmp r0, r1 /* don't reloc during debug */
beq stack_setup
-
ldr r2, _armboot_start
ldr r3, _bss_start
sub r2, r3, r2 /* r2 <- size of armboot */
@@ -166,11 +187,14 @@ copy_loop:
/* Set up the stack */
stack_setup:
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
+ sub sp, r0, #128 /* leave 32 words for abort-stack */
+#ifndef CONFIG_PRELOADER
sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */
sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */
#ifdef CONFIG_USE_IRQ
sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
#endif
+#endif /* CONFIG_PRELOADER */
sub sp, r0, #12 /* leave 3 words for abort-stack */
bic sp, r0, #7 /* 8-byte align stack for ABI compliance */
@@ -179,6 +203,7 @@ clear_bss:
ldr r1, _bss_end /* stop here */
mov r2, #0x00000000 /* clear */
+#ifndef CONFIG_PRELOADER
clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4
cmp r0, r1
@@ -186,11 +211,16 @@ clbss_l:str r2, [r0] /* clear loop... */
bl coloured_LED_init
bl red_LED_on
+#endif /* CONFIG_PRELOADER */
ldr pc, _start_armboot
_start_armboot:
+#ifdef CONFIG_NAND_SPL
+ .word nand_boot
+#else
.word start_armboot
+#endif /* CONFIG_NAND_SPL */
/*
@@ -231,6 +261,7 @@ cpu_init_crit:
mov pc, lr /* back to my caller */
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+#ifndef CONFIG_PRELOADER
/*
*************************************************************************
*
@@ -332,10 +363,18 @@ cpu_init_crit:
.macro get_fiq_stack @ setup FIQ stack
ldr sp, FIQ_STACK_START
.endm
+#endif /* CONFIG_PRELOADER */
/*
* exception handlers
*/
+#ifdef CONFIG_PRELOADER
+ .align 5
+do_hang:
+ ldr sp, _TEXT_BASE /* switch to abort stack */
+1:
+ bl 1b /* hang and never return */
+#else /* !CONFIG_PRELOADER */
.align 5
undefined_instruction:
get_bad_stack
@@ -398,3 +437,4 @@ fiq:
bl do_fiq
#endif
+#endif /* CONFIG_PRELOADER */
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index b2b612e..9633858 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -22,27 +22,65 @@
#include <nand.h>
#include <linux/err.h>
#include <asm/io.h>
-#ifdef CONFIG_MX27
+#if defined(CONFIG_MX27) || defined(CONFIG_MX25)
#include <asm/arch/imx-regs.h>
#endif
#define DRIVER_NAME "mxc_nand"
+/*
+ * TODO: Use same register defs here as nand_spl mxc nand driver.
+ */
+/*
+ * Register map and bit definitions for the Freescale NAND Flash Controller
+ * present in various i.MX devices.
+ *
+ * MX31 and MX27 have version 1 which has
+ * 4 512 byte main buffers and
+ * 4 16 byte spare buffers
+ * to support up to 2K byte pagesize nand.
+ * Reading or writing a 2K page requires 4 FDI/FDO cycles.
+ *
+ * MX25 has version 1.1 which has
+ * 8 512 byte main buffers and
+ * 8 64 byte spare buffers
+ * to support up to 4K byte pagesize nand.
+ * Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
+ * Also some of registers are moved and/or changed meaning as seen below.
+ */
+#if defined(CONFIG_MX31) || defined(CONFIG_MX27)
+#define MXC_NFC_V1
+#elif defined(CONFIG_MX25)
+#define MXC_NFC_V1_1
+#else
+#warning "MXC NFC version not defined"
+#endif
+
+#if defined(MXC_NFC_V1)
+#define NAND_MXC_NR_BUFS 4
+#define NAND_MXC_SPARE_BUF_SIZE 16
+#define NAND_MXC_REG_OFFSET 0xe00
+#define is_mxc_nfc_11() 0
+#elif defined(MXC_NFC_V1_1)
+#define NAND_MXC_NR_BUFS 8
+#define NAND_MXC_SPARE_BUF_SIZE 64
+#define NAND_MXC_REG_OFFSET 0x1e00
+#define is_mxc_nfc_11() 1
+#else
+#error "define CONFIG_NAND_MXC_VXXX to use mtd mxc nand driver"
+#endif
struct nfc_regs {
-/* NFC RAM BUFFER Main area 0 */
- uint8_t main_area0[0x200];
- uint8_t main_area1[0x200];
- uint8_t main_area2[0x200];
- uint8_t main_area3[0x200];
-/* SPARE BUFFER Spare area 0 */
- uint8_t spare_area0[0x10];
- uint8_t spare_area1[0x10];
- uint8_t spare_area2[0x10];
- uint8_t spare_area3[0x10];
- uint8_t pad[0x5c0];
-/* NFC registers */
+ uint8_t main_area[NAND_MXC_NR_BUFS][0x200];
+ uint8_t spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
+ /*
+ * reserved size is offset of nfc registers
+ * minus total main and spare sizes
+ */
+ uint8_t reserved1[NAND_MXC_REG_OFFSET
+ - NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
+#if defined(MXC_NFC_V1)
uint16_t nfc_buf_size;
- uint16_t reserved;
+ uint16_t reserved2;
uint16_t nfc_buf_addr;
uint16_t nfc_flash_addr;
uint16_t nfc_flash_cmd;
@@ -56,6 +94,30 @@ struct nfc_regs {
uint16_t nfc_nf_wrprst;
uint16_t nfc_config1;
uint16_t nfc_config2;
+#elif defined(MXC_NFC_V1_1)
+ uint16_t reserved2[2];
+ uint16_t nfc_buf_addr;
+ uint16_t nfc_flash_addr;
+ uint16_t nfc_flash_cmd;
+ uint16_t nfc_config;
+ uint16_t nfc_ecc_status_result;
+ uint16_t nfc_ecc_status_result2;
+ uint16_t nfc_spare_area_size;
+ uint16_t nfc_wrprot;
+ uint16_t reserved3[2];
+ uint16_t nfc_nf_wrprst;
+ uint16_t nfc_config1;
+ uint16_t nfc_config2;
+ uint16_t reserved4;
+ uint16_t nfc_unlockstart_blkaddr;
+ uint16_t nfc_unlockend_blkaddr;
+ uint16_t nfc_unlockstart_blkaddr1;
+ uint16_t nfc_unlockend_blkaddr1;
+ uint16_t nfc_unlockstart_blkaddr2;
+ uint16_t nfc_unlockend_blkaddr2;
+ uint16_t nfc_unlockstart_blkaddr3;
+ uint16_t nfc_unlockend_blkaddr3;
+#endif
};
/*
@@ -100,6 +162,11 @@ struct nfc_regs {
*/
#define NFC_INT 0x8000
+#ifdef MXC_NFC_V1_1
+#define NFC_4_8N_ECC (1 << 0)
+#else
+#define NFC_4_8N_ECC 0
+#endif
#define NFC_SP_EN (1 << 2)
#define NFC_ECC_EN (1 << 3)
#define NFC_BIG (1 << 5)
@@ -119,6 +186,7 @@ struct mxc_nand_host {
int pagesize_2k;
int clk_act;
uint16_t col_addr;
+ unsigned int page_addr;
};
static struct mxc_nand_host mxc_host;
@@ -135,26 +203,45 @@ static struct mxc_nand_host *host = &mxc_host;
#define SPARE_SINGLEBIT_ERROR 0x1
/* OOB placement block for use with hardware ecc generation */
-#ifdef CONFIG_MXC_NAND_HWECC
+#if defined(MXC_NFC_V1)
+#ifndef CONFIG_SYS_NAND_LARGEPAGE
static struct nand_ecclayout nand_hw_eccoob = {
.eccbytes = 5,
.eccpos = {6, 7, 8, 9, 10},
- .oobfree = {{0, 5}, {11, 5}, }
+ .oobfree = { {0, 5}, {11, 5}, }
};
#else
-static struct nand_ecclayout nand_soft_eccoob = {
- .eccbytes = 6,
- .eccpos = {6, 7, 8, 9, 10, 11},
- .oobfree = {{0, 5}, {12, 4}, }
+static struct nand_ecclayout nand_hw_eccoob2k = {
+ .eccbytes = 20,
+ .eccpos = {
+ 6, 7, 8, 9, 10,
+ 22, 23, 24, 25, 26,
+ 38, 39, 40, 41, 42,
+ 54, 55, 56, 57, 58,
+ },
+ .oobfree = { {2, 4}, {11, 11}, {27, 11}, {43, 11}, {59, 5} },
};
#endif
-
-static struct nand_ecclayout nand_hw_eccoob_largepage = {
- .eccbytes = 20,
- .eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
- 38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
- .oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
+#elif defined(MXC_NFC_V1_1)
+#ifndef CONFIG_SYS_NAND_LARGEPAGE
+static struct nand_ecclayout nand_hw_eccoob = {
+ .eccbytes = 9,
+ .eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
+ .oobfree = { {2, 5} }
};
+#else
+static struct nand_ecclayout nand_hw_eccoob2k = {
+ .eccbytes = 36,
+ .eccpos = {
+ 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 55, 56, 57, 58, 59, 60, 61, 62, 63,
+ },
+ .oobfree = { {2, 5}, {16, 7}, {32, 7}, {48, 7} },
+};
+#endif
+#endif
#ifdef CONFIG_MX27
static int is_16bit_nand(void)
@@ -178,6 +265,17 @@ static int is_16bit_nand(void)
else
return 0;
}
+#elif defined(CONFIG_MX25)
+static int is_16bit_nand(void)
+{
+ struct ccm_regs *ccm =
+ (struct ccm_regs *)IMX_CCM_BASE;
+
+ if (readl(&ccm->rcsr) & CCM_RCSR_NF_16BIT_SEL)
+ return 1;
+ else
+ return 0;
+}
#else
#warning "8/16 bit NAND autodetection not supported"
static int is_16bit_nand(void)
@@ -258,7 +356,24 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr)
static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
int spare_only)
{
- MTDDEBUG(MTD_DEBUG_LEVEL3, "send_prog_page (%d)\n", spare_only);
+ if (spare_only)
+ MTDDEBUG(MTD_DEBUG_LEVEL1, "send_prog_page (%d)\n", spare_only);
+
+ if (is_mxc_nfc_11()) {
+ int i;
+ /*
+ * The controller copies the 64 bytes of spare data from
+ * the first 16 bytes of each of the 4 64 byte spare buffers.
+ * Copy the contiguous data starting in spare_area[0] to
+ * the four spare area buffers.
+ */
+ for (i = 1; i < 4; i++) {
+ void __iomem *src = &host->regs->spare_area[0][i * 16];
+ void __iomem *dst = &host->regs->spare_area[i][0];
+
+ mxc_nand_memcpy32(dst, src, 16);
+ }
+ }
writew(buf_id, &host->regs->nfc_buf_addr);
@@ -303,6 +418,22 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, spare_only);
+
+ if (is_mxc_nfc_11()) {
+ int i;
+
+ /*
+ * The controller copies the 64 bytes of spare data to
+ * the first 16 bytes of each of the 4 spare buffers.
+ * Make the data contiguous starting in spare_area[0].
+ */
+ for (i = 1; i < 4; i++) {
+ void __iomem *src = &host->regs->spare_area[i][0];
+ void __iomem *dst = &host->regs->spare_area[0][i * 16];
+
+ mxc_nand_memcpy32(dst, src, 16);
+ }
+ }
}
/* Request the NANDFC to perform a read of the NAND device ID. */
@@ -330,7 +461,7 @@ static void send_read_id(struct mxc_nand_host *host)
*/
static uint16_t get_dev_status(struct mxc_nand_host *host)
{
- void __iomem *main_buf = host->regs->main_area1;
+ void __iomem *main_buf = host->regs->main_area[1];
uint32_t store;
uint16_t ret, tmp;
/* Issue status request to NAND device */
@@ -379,6 +510,330 @@ static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
*/
}
+#ifdef MXC_NFC_V1_1
+static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint16_t tmp = readw(&host->regs->nfc_config1);
+
+ if (on)
+ tmp |= NFC_ECC_EN;
+ else
+ tmp &= ~NFC_ECC_EN;
+ writew(tmp, &host->regs->nfc_config1);
+}
+
+static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ int page, int sndcmd)
+{
+ struct mxc_nand_host *host = chip->priv;
+ uint8_t *buf = chip->oob_poi;
+ int length = mtd->oobsize;
+ int eccpitch = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+ uint8_t *bufpoi = buf;
+ int i, toread;
+
+ MTDDEBUG(MTD_DEBUG_LEVEL0,
+ "%s: Reading OOB area of page %u to oob %p\n",
+ __FUNCTION__, host->page_addr, buf);
+
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, page);
+ for (i = 0; i < chip->ecc.steps; i++) {
+ toread = min_t(int, length, chip->ecc.prepad);
+ if (toread) {
+ chip->read_buf(mtd, bufpoi, toread);
+ bufpoi += toread;
+ length -= toread;
+ }
+ bufpoi += chip->ecc.bytes;
+ host->col_addr += chip->ecc.bytes;
+ length -= chip->ecc.bytes;
+
+ toread = min_t(int, length, chip->ecc.postpad);
+ if (toread) {
+ chip->read_buf(mtd, bufpoi, toread);
+ bufpoi += toread;
+ length -= toread;
+ }
+ }
+ if (length > 0)
+ chip->read_buf(mtd, bufpoi, length);
+
+ _mxc_nand_enable_hwecc(mtd, 0);
+ chip->cmdfunc(mtd, NAND_CMD_READOOB,
+ mtd->writesize + chip->ecc.prepad, page);
+ bufpoi = buf + chip->ecc.prepad;
+ length = mtd->oobsize - chip->ecc.prepad;
+ for (i = 0; i < chip->ecc.steps; i++) {
+ toread = min_t(int, length, chip->ecc.bytes);
+ chip->read_buf(mtd, bufpoi, toread);
+ bufpoi += eccpitch;
+ length -= eccpitch;
+ host->col_addr += chip->ecc.postpad + chip->ecc.prepad;
+ }
+ _mxc_nand_enable_hwecc(mtd, 1);
+ return 1;
+}
+
+static int mxc_nand_read_page_raw_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf,
+ int page)
+{
+ struct mxc_nand_host *host = chip->priv;
+ int eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
+ uint8_t *oob = chip->oob_poi;
+ int steps, size;
+ int n;
+
+ _mxc_nand_enable_hwecc(mtd, 0);
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, host->page_addr);
+
+ for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) {
+ host->col_addr = n * eccsize;
+ chip->read_buf(mtd, buf, eccsize);
+ buf += eccsize;
+
+ host->col_addr = mtd->writesize + n * eccpitch;
+ if (chip->ecc.prepad) {
+ chip->read_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ chip->read_buf(mtd, oob, eccbytes);
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->read_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ size = mtd->oobsize - (oob - chip->oob_poi);
+ if (size)
+ chip->read_buf(mtd, oob, size);
+ _mxc_nand_enable_hwecc(mtd, 0);
+
+ return 0;
+}
+
+static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf,
+ int page)
+{
+ struct mxc_nand_host *host = chip->priv;
+ int n, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *oob = chip->oob_poi;
+
+ MTDDEBUG(MTD_DEBUG_LEVEL1, "Reading page %u to buf %p oob %p\n",
+ host->page_addr, buf, oob);
+
+ /* first read out the data area and the available portion of OOB */
+ for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
+ int stat;
+
+ host->col_addr = n * eccsize;
+
+ chip->read_buf(mtd, p, eccsize);
+
+ host->col_addr = mtd->writesize + n * eccpitch;
+
+ if (chip->ecc.prepad) {
+ chip->read_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ stat = chip->ecc.correct(mtd, p, oob, NULL);
+
+ if (stat < 0)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->read_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ /* Calculate remaining oob bytes */
+ n = mtd->oobsize - (oob - chip->oob_poi);
+ if (n)
+ chip->read_buf(mtd, oob, n);
+
+ /* Then switch ECC off and read the OOB area to get the ECC code */
+ _mxc_nand_enable_hwecc(mtd, 0);
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, host->page_addr);
+ eccsteps = chip->ecc.steps;
+ oob = chip->oob_poi + chip->ecc.prepad;
+ for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
+ host->col_addr = mtd->writesize +
+ n * eccpitch +
+ chip->ecc.prepad;
+ chip->read_buf(mtd, oob, eccbytes);
+ oob += eccbytes + chip->ecc.postpad;
+ }
+ _mxc_nand_enable_hwecc(mtd, 1);
+ return 0;
+}
+
+static int mxc_nand_write_oob_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, int page)
+{
+ struct mxc_nand_host *host = chip->priv;
+ int eccpitch = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+ int length = mtd->oobsize;
+ int i, len, status, steps = chip->ecc.steps;
+ const uint8_t *bufpoi = chip->oob_poi;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+ for (i = 0; i < steps; i++) {
+ len = min_t(int, length, eccpitch);
+
+ chip->write_buf(mtd, bufpoi, len);
+ bufpoi += len;
+ length -= len;
+ host->col_addr += chip->ecc.prepad + chip->ecc.postpad;
+ }
+ if (length > 0)
+ chip->write_buf(mtd, bufpoi, length);
+
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+static void mxc_nand_write_page_raw_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf)
+{
+ struct mxc_nand_host *host = chip->priv;
+ int eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
+ uint8_t *oob = chip->oob_poi;
+ int steps, size;
+ int n;
+
+ for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) {
+ host->col_addr = n * eccsize;
+ chip->write_buf(mtd, buf, eccsize);
+ buf += eccsize;
+
+ host->col_addr = mtd->writesize + n * eccpitch;
+
+ if (chip->ecc.prepad) {
+ chip->write_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ host->col_addr += eccbytes;
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->write_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ size = mtd->oobsize - (oob - chip->oob_poi);
+ if (size)
+ chip->write_buf(mtd, oob, size);
+}
+
+static void mxc_nand_write_page_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf)
+{
+ struct mxc_nand_host *host = chip->priv;
+ int i, n, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
+ int eccsteps = chip->ecc.steps;
+ const uint8_t *p = buf;
+ uint8_t *oob = chip->oob_poi;
+
+ chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+
+ for (i = n = 0;
+ eccsteps;
+ n++, eccsteps--, i += eccbytes, p += eccsize) {
+ host->col_addr = n * eccsize;
+
+ chip->write_buf(mtd, p, eccsize);
+
+ host->col_addr = mtd->writesize + n * eccpitch;
+
+ if (chip->ecc.prepad) {
+ chip->write_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ chip->write_buf(mtd, oob, eccbytes);
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->write_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ /* Calculate remaining oob bytes */
+ i = mtd->oobsize - (oob - chip->oob_poi);
+ if (i)
+ chip->write_buf(mtd, oob, i);
+}
+
+static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint16_t ecc_status = readw(&host->regs->nfc_ecc_status_result);
+ int subpages = mtd->writesize / nand_chip->subpagesize;
+ int pg2blk_shift = nand_chip->phys_erase_shift -
+ nand_chip->page_shift;
+
+ do {
+ if ((ecc_status & 0xf) > 4) {
+ static int last_bad = -1;
+
+ if (last_bad != host->page_addr >> pg2blk_shift) {
+ last_bad = host->page_addr >> pg2blk_shift;
+ printk(KERN_DEBUG
+ "MXC_NAND: HWECC uncorrectable ECC error"
+ " in block %u page %u subpage %d\n",
+ last_bad, host->page_addr,
+ mtd->writesize / nand_chip->subpagesize
+ - subpages);
+ }
+ return -1;
+ }
+ ecc_status >>= 4;
+ subpages--;
+ } while (subpages > 0);
+
+ return 0;
+}
+#else
+#define mxc_nand_read_page_syndrome NULL
+#define mxc_nand_read_page_raw_syndrome NULL
+#define mxc_nand_read_oob_syndrome NULL
+#define mxc_nand_write_page_syndrome NULL
+#define mxc_nand_write_page_raw_syndrome NULL
+#define mxc_nand_write_oob_syndrome NULL
+#define mxc_nfc_11_nand_correct_data NULL
+
static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc)
{
@@ -400,6 +855,9 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
return 0;
}
+#endif
+
+
static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
u_char *ecc_code)
@@ -415,9 +873,9 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd)
uint8_t ret = 0;
uint16_t col;
uint16_t __iomem *main_buf =
- (uint16_t __iomem *)host->regs->main_area0;
+ (uint16_t __iomem *)host->regs->main_area[0];
uint16_t __iomem *spare_buf =
- (uint16_t __iomem *)host->regs->spare_area0;
+ (uint16_t __iomem *)host->regs->spare_area[0];
union {
uint16_t word;
uint8_t bytes[2];
@@ -464,9 +922,10 @@ static uint16_t mxc_nand_read_word(struct mtd_info *mtd)
col += mtd->writesize;
if (col < mtd->writesize) {
- p = (uint16_t __iomem *)(host->regs->main_area0 + (col >> 1));
+ p = (uint16_t __iomem *)(host->regs->main_area[0] +
+ (col >> 1));
} else {
- p = (uint16_t __iomem *)(host->regs->spare_area0 +
+ p = (uint16_t __iomem *)(host->regs->spare_area[0] +
((col - mtd->writesize) >> 1));
}
@@ -525,9 +984,9 @@ static void mxc_nand_write_buf(struct mtd_info *mtd,
void __iomem *p;
if (col < mtd->writesize) {
- p = host->regs->main_area0 + (col & ~3);
+ p = host->regs->main_area[0] + (col & ~3);
} else {
- p = host->regs->spare_area0 -
+ p = host->regs->spare_area[0] -
mtd->writesize + (col & ~3);
}
@@ -595,9 +1054,9 @@ static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
void __iomem *p;
if (col < mtd->writesize) {
- p = host->regs->main_area0 + (col & ~3);
+ p = host->regs->main_area[0] + (col & ~3);
} else {
- p = host->regs->spare_area0 -
+ p = host->regs->spare_area[0] -
mtd->writesize + (col & ~3);
}
@@ -683,7 +1142,7 @@ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
* Used by the upper layer to write command to NAND Flash for
* different operations to be carried out on NAND Flash
*/
-static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
+void mxc_nand_command(struct mtd_info *mtd, unsigned command,
int column, int page_addr)
{
struct nand_chip *nand_chip = mtd->priv;
@@ -705,6 +1164,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
break;
case NAND_CMD_READ0:
+ host->page_addr = page_addr;
host->col_addr = column;
host->spare_only = false;
break;
@@ -750,7 +1210,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
case NAND_CMD_PAGEPROG:
send_prog_page(host, 0, host->spare_only);
- if (host->pagesize_2k) {
+ if (host->pagesize_2k && !is_mxc_nfc_11()) {
/* data in 4 areas datas */
send_prog_page(host, 1, host->spare_only);
send_prog_page(host, 2, host->spare_only);
@@ -780,30 +1240,12 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
/* Write out page address, if necessary */
if (page_addr != -1) {
- /* paddr_0 - p_addr_7 */
- send_addr(host, (page_addr & 0xff));
-
- if (host->pagesize_2k) {
- send_addr(host, (page_addr >> 8) & 0xFF);
- if (mtd->size >= 0x10000000) {
- /* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff);
- send_addr(host, (page_addr >> 16) & 0xff);
- } else {
- /* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff);
- }
- } else {
- /* One more address cycle for higher density devices */
- if (mtd->size >= 0x4000000) {
- /* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff);
- send_addr(host, (page_addr >> 16) & 0xff);
- } else {
- /* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff);
- }
- }
+ u32 page_mask = nand_chip->pagemask;
+ do {
+ send_addr(host, page_addr & 0xFF);
+ page_addr >>= 8;
+ page_mask >>= 8;
+ } while (page_mask);
}
/* Command post-processing step */
@@ -819,9 +1261,11 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
send_cmd(host, NAND_CMD_READSTART);
/* read for each AREA */
send_read_page(host, 0, host->spare_only);
- send_read_page(host, 1, host->spare_only);
- send_read_page(host, 2, host->spare_only);
- send_read_page(host, 3, host->spare_only);
+ if (!is_mxc_nfc_11()) {
+ send_read_page(host, 1, host->spare_only);
+ send_read_page(host, 2, host->spare_only);
+ send_read_page(host, 3, host->spare_only);
+ }
} else {
send_read_page(host, 0, host->spare_only);
}
@@ -843,6 +1287,24 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
}
}
+#ifdef MXC_NFC_V1_1
+static void mxc_setup_config1(void)
+{
+ uint16_t tmp;
+
+ tmp = readw(&host->regs->nfc_config1);
+ tmp |= NFC_ONE_CYCLE;
+ tmp |= NFC_4_8N_ECC;
+ writew(tmp, &host->regs->nfc_config1);
+ if (host->pagesize_2k)
+ writew(64/2, &host->regs->nfc_spare_area_size);
+ else
+ writew(16/2, &host->regs->nfc_spare_area_size);
+}
+#else
+#define mxc_setup_config1()
+#endif
+
int board_nand_init(struct nand_chip *this)
{
struct mtd_info *mtd;
@@ -874,10 +1336,23 @@ int board_nand_init(struct nand_chip *this)
this->ecc.calculate = mxc_nand_calculate_ecc;
this->ecc.hwctl = mxc_nand_enable_hwecc;
this->ecc.correct = mxc_nand_correct_data;
- this->ecc.mode = NAND_ECC_HW;
+ if (is_mxc_nfc_11()) {
+ this->ecc.mode = NAND_ECC_HW_SYNDROME;
+ this->ecc.read_page = mxc_nand_read_page_syndrome;
+ this->ecc.read_page_raw = mxc_nand_read_page_raw_syndrome;
+ this->ecc.read_oob = mxc_nand_read_oob_syndrome;
+ this->ecc.write_page = mxc_nand_write_page_syndrome;
+ this->ecc.write_page_raw = mxc_nand_write_page_raw_syndrome;
+ this->ecc.write_oob = mxc_nand_write_oob_syndrome;
+ this->ecc.bytes = 9;
+ this->ecc.prepad = 7;
+ } else {
+ this->ecc.mode = NAND_ECC_HW;
+ }
+
+ host->pagesize_2k = 0;
+
this->ecc.size = 512;
- this->ecc.bytes = 3;
- this->ecc.layout = &nand_hw_eccoob;
tmp = readw(&host->regs->nfc_config1);
tmp |= NFC_ECC_EN;
writew(tmp, &host->regs->nfc_config1);
@@ -888,7 +1363,6 @@ int board_nand_init(struct nand_chip *this)
tmp &= ~NFC_ECC_EN;
writew(tmp, &host->regs->nfc_config1);
#endif
-
/* Reset NAND */
this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
@@ -911,10 +1385,11 @@ int board_nand_init(struct nand_chip *this)
#ifdef CONFIG_SYS_NAND_LARGEPAGE
host->pagesize_2k = 1;
- this->ecc.layout = &nand_hw_eccoob_largepage;
+ this->ecc.layout = &nand_hw_eccoob2k;
#else
host->pagesize_2k = 0;
+ this->ecc.layout = &nand_hw_eccoob;
#endif
-
+ mxc_setup_config1();
return err;
}
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index ae2fc19..6cf807b 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -62,6 +62,12 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_L2_CACHE /* toggle L2 cache */
#define CONFIG_BTB /* toggle branch predition */
+#ifdef CONFIG_MK_NAND
+#define CONFIG_NAND_U_BOOT 1
+#define CONFIG_RAMBOOT_NAND 1
+#define CONFIG_RAMBOOT_TEXT_BASE 0xf8f82000
+#endif
+
/*
* Only possible on E500 Version 2 or newer cores.
*/
@@ -74,16 +80,29 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_MEMTEST_END 0x00400000
/*
+ * Config the L2 Cache as L2 SRAM
+ */
+#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
+#define CONFIG_SYS_L2_SIZE (512 << 10)
+#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
+
+/*
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
/* physical addr of CCSRBAR */
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR
/* PQII uses CONFIG_SYS_IMMR */
+#if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_SYS_CCSRBAR_DEFAULT CONFIG_SYS_CCSRBAR
+#else
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#endif
+
#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
@@ -152,8 +171,8 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE
/*Chip select 0 - Flash*/
-#define CONFIG_SYS_BR0_PRELIM 0xfe000801
-#define CONFIG_SYS_OR0_PRELIM 0xfe000ff7
+#define CONFIG_FLASH_BR_PRELIM 0xfe000801
+#define CONFIG_FLASH_OR_PRELIM 0xfe000ff7
/*Chip select 1 - BCSR*/
#define CONFIG_SYS_BR1_PRELIM 0xf8000801
@@ -175,12 +194,33 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND)
+#define CONFIG_SYS_RAMBOOT
+#else
+#undef CONFIG_SYS_RAMBOOT
+#endif
+
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_EMPTY_INFO
/* Chip select 3 - NAND */
+#ifndef CONFIG_NAND_SPL
#define CONFIG_SYS_NAND_BASE 0xFC000000
+#else
+#define CONFIG_SYS_NAND_BASE 0xFFF00000
+#endif
+
+/* NAND boot: 4K NAND loader config */
+#define CONFIG_SYS_NAND_SPL_SIZE 0x1000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR)
+#define CONFIG_SYS_NAND_U_BOOT_START \
+ (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (0)
+#define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
+
#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, }
#define CONFIG_SYS_MAX_NAND_DEVICE 1
@@ -200,8 +240,18 @@ extern unsigned long get_clock_freq(void);
| OR_FCM_SCY_1 \
| OR_FCM_TRLX \
| OR_FCM_EHTR)
+
+#ifdef CONFIG_RAMBOOT_NAND
+#define CONFIG_SYS_BR0_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR0_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
+#define CONFIG_SYS_BR3_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
+#define CONFIG_SYS_OR3_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
+#else
+#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
+#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
#define CONFIG_SYS_BR3_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */
#define CONFIG_SYS_OR3_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
+#endif
/*
* SDRAM on the LocalBus
@@ -437,10 +487,18 @@ extern unsigned long get_clock_freq(void);
/*
* Environment
*/
+#if defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_RAMBOOT_NAND)
+#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#endif
+#else
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 256K(one sector) for env */
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+#endif
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
diff --git a/include/fsl_nfc.h b/include/fsl_nfc.h
index da5be37..279aaa5 100644
--- a/include/fsl_nfc.h
+++ b/include/fsl_nfc.h
@@ -1,5 +1,4 @@
/*
- *
* (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
*
* See file CREDITS for list of people who contributed to this
@@ -25,21 +24,57 @@
#define __FSL_NFC_H
/*
+ * TODO: Use same register defs for nand_spl mxc nand driver
+ * and mtd mxc nand driver.
+ *
* Register map and bit definitions for the Freescale NAND Flash
- * Controller present in i.MX31 and other devices.
+ * Controller present in various i.MX devices.
+ *
+ * MX31 and MX27 have version 1 which has
+ * 4 512 byte main buffers and
+ * 4 16 byte spare buffers
+ * to support up to 2K byte pagesize nand.
+ * Reading or writing a 2K page requires 4 FDI/FDO cycles.
+ *
+ * MX25 has version 1.1 which has
+ * 8 512 byte main buffers and
+ * 8 64 byte spare buffers
+ * to support up to 4K byte pagesize nand.
+ * Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
+ * Also some of registers are moved and/or changed meaning as seen below.
*/
+#if defined(CONFIG_MX31) || defined(CONFIG_MX27)
+#define MXC_NFC_V1
+#elif defined(CONFIG_MX25)
+#define MXC_NFC_V1_1
+#else
+#warning "MXC NFC version not defined"
+#endif
+
+#if defined(MXC_NFC_V1)
+#define NAND_MXC_NR_BUFS 4
+#define NAND_MXC_SPARE_BUF_SIZE 16
+#define NAND_MXC_REG_OFFSET 0xe00
+#define NAND_MXC_2K_MULTI_CYCLE 1
+#elif defined(MXC_NFC_V1_1)
+#define NAND_MXC_NR_BUFS 8
+#define NAND_MXC_SPARE_BUF_SIZE 64
+#define NAND_MXC_REG_OFFSET 0x1e00
+#else
+#error "define CONFIG_NAND_MXC_VXXX to use the mxc spl_nand driver"
+#endif
struct fsl_nfc_regs {
- u32 main_area0[128]; /* @0x000 */
- u32 main_area1[128];
- u32 main_area2[128];
- u32 main_area3[128];
- u32 spare_area0[4];
- u32 spare_area1[4];
- u32 spare_area2[4];
- u32 spare_area3[4];
- u32 reserved1[64 - 16 + 64 * 5];
- u16 bufsiz; /* @ 0xe00 */
+ u32 main_area[NAND_MXC_NR_BUFS][512/4];
+ u32 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE/4];
+ /*
+ * reserved size is offset of nfc registers
+ * minus total main and spare sizes
+ */
+ u8 reserved1[NAND_MXC_REG_OFFSET
+ - NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
+#if defined(MXC_NFC_V1)
+ u16 bufsiz;
u16 reserved2;
u16 buffer_address;
u16 flash_add;
@@ -54,6 +89,30 @@ struct fsl_nfc_regs {
u16 nand_flash_wr_pr_st;
u16 nand_flash_config1;
u16 nand_flash_config2;
+#elif defined(MXC_NFC_V1_1)
+ u16 reserved2[2];
+ u16 buffer_address;
+ u16 flash_add;
+ u16 flash_cmd;
+ u16 configuration;
+ u16 ecc_status_result;
+ u16 ecc_status_result2;
+ u16 spare_area_size;
+ u16 nf_wr_prot;
+ u16 reserved3[2];
+ u16 nand_flash_wr_pr_st;
+ u16 nand_flash_config1;
+ u16 nand_flash_config2;
+ u16 reserved4;
+ u16 unlock_start_blk_add0;
+ u16 unlock_end_blk_add0;
+ u16 unlock_start_blk_add1;
+ u16 unlock_end_blk_add1;
+ u16 unlock_start_blk_add2;
+ u16 unlock_end_blk_add2;
+ u16 unlock_start_blk_add3;
+ u16 unlock_end_blk_add3;
+#endif
};
/*
@@ -98,6 +157,9 @@ struct fsl_nfc_regs {
*/
#define NFC_INT 0x8000
+#ifdef MXC_NFC_V1_1
+#define NFC_4_8N_ECC (1 << 0)
+#endif
#define NFC_SP_EN (1 << 2)
#define NFC_ECC_EN (1 << 3)
#define NFC_INT_MSK (1 << 4)
diff --git a/nand_spl/board/freescale/mpc8569mds/Makefile b/nand_spl/board/freescale/mpc8569mds/Makefile
new file mode 100644
index 0000000..7ed9d61
--- /dev/null
+++ b/nand_spl/board/freescale/mpc8569mds/Makefile
@@ -0,0 +1,133 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# Copyright 2009 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+NAND_SPL := y
+TEXT_BASE := 0xfff00000
+PAD_TO := 0xfff01000
+
+include $(TOPDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/cpu/$(CPU)/u-boot-nand_spl.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS = start.o resetvec.o
+COBJS = cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
+ nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj := $(OBJTREE)/nand_spl/
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+# create symbolic links for common files
+
+$(obj)cache.c:
+ @rm -f $(obj)cache.c
+ ln -sf $(SRCTREE)/lib_ppc/cache.c $(obj)cache.c
+
+$(obj)cpu_init_early.c:
+ @rm -f $(obj)cpu_init_early.c
+ ln -sf $(SRCTREE)/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
+
+$(obj)cpu_init_nand.c:
+ @rm -f $(obj)cpu_init_nand.c
+ ln -sf $(SRCTREE)/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
+
+$(obj)fsl_law.c:
+ @rm -f $(obj)fsl_law.c
+ ln -sf $(SRCTREE)/drivers/misc/fsl_law.c $(obj)fsl_law.c
+
+$(obj)law.c:
+ @rm -f $(obj)law.c
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c
+
+$(obj)nand_boot_fsl_elbc.c:
+ @rm -f $(obj)nand_boot_fsl_elbc.c
+ ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
+ $(obj)nand_boot_fsl_elbc.c
+
+$(obj)ns16550.c:
+ @rm -f $(obj)ns16550.c
+ ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
+
+$(obj)resetvec.S:
+ @rm -f $(obj)resetvec.S
+ ln -s $(SRCTREE)/cpu/$(CPU)/resetvec.S $(obj)resetvec.S
+
+$(obj)fixed_ivor.S:
+ @rm -f $(obj)fixed_ivor.S
+ ln -sf $(SRCTREE)/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
+
+$(obj)start.S: $(obj)fixed_ivor.S
+ @rm -f $(obj)start.S
+ ln -sf $(SRCTREE)/cpu/mpc85xx/start.S $(obj)start.S
+
+$(obj)tlb.c:
+ @rm -f $(obj)tlb.c
+ ln -sf $(SRCTREE)/cpu/mpc85xx/tlb.c $(obj)tlb.c
+
+$(obj)tlb_table.c:
+ @rm -f $(obj)tlb_table.c
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
+
+ifneq ($(OBJTREE), $(SRCTREE))
+$(obj)nand_boot.c:
+ @rm -f $(obj)nand_boot.c
+ ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+endif
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/freescale/mpc8569mds/nand_boot.c b/nand_spl/board/freescale/mpc8569mds/nand_boot.c
new file mode 100644
index 0000000..e030656
--- /dev/null
+++ b/nand_spl/board/freescale/mpc8569mds/nand_boot.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <mpc85xx.h>
+#include <asm-ppc/io.h>
+#include <ns16550.h>
+#include <nand.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_law.h>
+
+#define SYSCLK_66 66666666
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_init_f(ulong bootflag)
+{
+ uint plat_ratio, bus_clk, sys_clk;
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+ sys_clk = SYSCLK_66;
+
+ plat_ratio = gur->porpllsr & 0x0000003e;
+ plat_ratio >>= 1;
+ bus_clk = plat_ratio * sys_clk;
+ NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+ bus_clk / 16 / CONFIG_BAUDRATE);
+
+ puts("\nNAND boot... ");
+
+ /* copy code to DDR and jump to it - this should not return */
+ /* NOTE - code has to be copied out of NAND buffer before
+ * other blocks can be read.
+ */
+ relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0,
+ CONFIG_SYS_NAND_U_BOOT_RELOC);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+ nand_boot();
+}
+
+void putc(char c)
+{
+ if (c == '\n')
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
+
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
+}
+
+void puts(const char *str)
+{
+ while (*str)
+ putc(*str++);
+}
diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c
index a9df2a8..f4040a7 100644
--- a/nand_spl/nand_boot_fsl_nfc.c
+++ b/nand_spl/nand_boot_fsl_nfc.c
@@ -26,11 +26,15 @@
#include <common.h>
#include <nand.h>
+#ifdef CONFIG_MX31
#include <asm-arm/arch/mx31-regs.h>
+#else
+#include <asm-arm/arch/imx-regs.h>
+#endif
#include <asm/io.h>
#include <fsl_nfc.h>
-static struct fsl_nfc_regs *nfc;
+struct fsl_nfc_regs *nfc;
static void nfc_wait_ready(void)
{
@@ -45,13 +49,35 @@ static void nfc_wait_ready(void)
writew(tmp, &nfc->nand_flash_config2);
}
-static void nfc_nand_init(void)
+void nfc_nand_init(void)
{
+#if defined(MXC_NFC_V1_1)
+ int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
+ int config1;
+
+ writew(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
+
+ /* unlocking RAM Buff */
+ writew(0x2, &nfc->configuration);
+
+ /* hardware ECC checking and correct */
+ config1 = readw(&nfc->nand_flash_config1) | NFC_ECC_EN | 0x800;
+ /*
+ * if spare size is larger that 16 bytes per 512 byte hunk
+ * then use 8 symbol correction instead of 4
+ */
+ if ((CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page) > 16)
+ config1 &= ~NFC_4_8N_ECC;
+ else
+ config1 |= NFC_4_8N_ECC;
+ writew(config1, &nfc->nand_flash_config1);
+#elif defined(MXC_NFC_V1)
/* unlocking RAM Buff */
writew(0x2, &nfc->configuration);
/* hardware ECC checking and correct */
writew(NFC_ECC_EN, &nfc->nand_flash_config1);
+#endif
}
static void nfc_nand_command(unsigned short command)
@@ -65,12 +91,12 @@ static void nfc_nand_page_address(unsigned int page_address)
{
unsigned int page_count;
- writew(0x00, &nfc->flash_cmd);
+ writew(0x00, &nfc->flash_add);
writew(NFC_ADDR, &nfc->nand_flash_config2);
nfc_wait_ready();
- /* code only for 2kb flash */
- if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800) {
+ /* code only for large page flash */
+ if (CONFIG_SYS_NAND_PAGE_SIZE > 512) {
writew(0x00, &nfc->flash_add);
writew(NFC_ADDR, &nfc->nand_flash_config2);
nfc_wait_ready();
@@ -88,22 +114,38 @@ static void nfc_nand_page_address(unsigned int page_address)
page_count = page_count >> 8;
} while (page_count);
}
+
+ writew(0x00, &nfc->flash_add);
+ writew(NFC_ADDR, &nfc->nand_flash_config2);
+ nfc_wait_ready();
}
static void nfc_nand_data_output(void)
{
+ int config1 = readw(&nfc->nand_flash_config1);
+#ifdef NAND_MXC_2K_MULTI_CYCLE
int i;
+#endif
+ config1 |= NFC_ECC_EN | NFC_INT_MSK;
+ writew(config1, &nfc->nand_flash_config1);
+ writew(0, &nfc->buffer_address);
+ writew(NFC_OUTPUT, &nfc->nand_flash_config2);
+ nfc_wait_ready();
+#ifdef NAND_MXC_2K_MULTI_CYCLE
/*
- * The NAND controller requires four output commands for
- * large page devices.
+ * This NAND controller requires multiple input commands
+ * for pages larger than 512 bytes.
*/
- for (i = 0; i < (CONFIG_SYS_NAND_PAGE_SIZE / 512); i++) {
- writew(NFC_ECC_EN, &nfc->nand_flash_config1);
- writew(i, &nfc->buffer_address); /* read in i:th buffer */
+ for (i = 1; i < (CONFIG_SYS_NAND_PAGE_SIZE / 512); i++) {
+ config1 = readw(&nfc->nand_flash_config1);
+ config1 |= NFC_ECC_EN | NFC_INT_MSK;
+ writew(config1, &nfc->nand_flash_config1);
+ writew(i, &nfc->buffer_address);
writew(NFC_OUTPUT, &nfc->nand_flash_config2);
nfc_wait_ready();
}
+#endif
}
static int nfc_nand_check_ecc(void)
@@ -121,7 +163,7 @@ static int nfc_read_page(unsigned int page_address, unsigned char *buf)
nfc_nand_command(NAND_CMD_READ0);
nfc_nand_page_address(page_address);
- if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800)
+ if (CONFIG_SYS_NAND_PAGE_SIZE > 512)
nfc_nand_command(NAND_CMD_READSTART);
nfc_nand_data_output(); /* fill the main buffer 0 */
@@ -129,7 +171,7 @@ static int nfc_read_page(unsigned int page_address, unsigned char *buf)
if (nfc_nand_check_ecc())
return -1;
- src = &nfc->main_area0[0];
+ src = &nfc->main_area[0][0];
dst = (u32 *)buf;
/* main copy loop from NAND-buffer to SDRAM memory */
@@ -154,12 +196,12 @@ static int is_badblock(int pagenumber)
nfc_nand_command(NAND_CMD_READ0);
nfc_nand_page_address(page);
- if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800)
+ if (CONFIG_SYS_NAND_PAGE_SIZE > 512)
nfc_nand_command(NAND_CMD_READSTART);
nfc_nand_data_output(); /* fill the main buffer 0 */
- src = &nfc->spare_area0[0];
+ src = &nfc->spare_area[0][0];
/*
* IMPORTANT NOTE: The nand flash controller uses a non-
@@ -209,7 +251,7 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf)
if (!(page % CONFIG_SYS_NAND_PAGE_COUNT)) {
/*
* Yes, new block. See if this block is good. If not,
- * loop until we find i good block.
+ * loop until we find a good block.
*/
while (is_badblock(page)) {
page = page + CONFIG_SYS_NAND_PAGE_COUNT;
generated by cgit v1.1 at 2024-11-25 19:00:53 +0000