summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/cpu/armv7/zynq/Makefile1
-rw-r--r--arch/arm/cpu/armv7/zynq/config.mk7
-rw-r--r--arch/arm/cpu/armv7/zynq/cpu.c4
-rw-r--r--arch/arm/cpu/armv7/zynq/ddrc.c2
-rw-r--r--arch/arm/cpu/armv7/zynq/lowlevel_init.S26
-rw-r--r--arch/arm/cpu/armv7/zynq/slcr.c2
-rw-r--r--arch/arm/cpu/armv7/zynq/spl.c9
-rw-r--r--arch/arm/include/asm/arch-zynq/hardware.h5
-rw-r--r--board/xilinx/zynq/board.c14
-rw-r--r--drivers/serial/serial_zynq.c30
-rw-r--r--include/configs/zynq-common.h77
11 files changed, 137 insertions, 40 deletions
diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile
index 3363a3c..901f2ce 100644
--- a/arch/arm/cpu/armv7/zynq/Makefile
+++ b/arch/arm/cpu/armv7/zynq/Makefile
@@ -13,4 +13,5 @@ obj-y += cpu.o
obj-y += ddrc.o
obj-y += slcr.o
obj-y += clk.o
+obj-y += lowlevel_init.o
obj-$(CONFIG_SPL_BUILD) += spl.o
diff --git a/arch/arm/cpu/armv7/zynq/config.mk b/arch/arm/cpu/armv7/zynq/config.mk
new file mode 100644
index 0000000..778a377
--- /dev/null
+++ b/arch/arm/cpu/armv7/zynq/config.mk
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2013 - 2015 Xilinx, Inc. All rights reserved.
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+# Allow NEON instructions (needed for lowlevel_init.S with GNU toolchain)
+PLATFORM_RELFLAGS += -mfpu=neon
diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c
index 816d0c5..914b1fe 100644
--- a/arch/arm/cpu/armv7/zynq/cpu.c
+++ b/arch/arm/cpu/armv7/zynq/cpu.c
@@ -10,10 +10,6 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
-void lowlevel_init(void)
-{
-}
-
#define ZYNQ_SILICON_VER_MASK 0xF0000000
#define ZYNQ_SILICON_VER_SHIFT 28
diff --git a/arch/arm/cpu/armv7/zynq/ddrc.c b/arch/arm/cpu/armv7/zynq/ddrc.c
index d74f8db..5b20acc 100644
--- a/arch/arm/cpu/armv7/zynq/ddrc.c
+++ b/arch/arm/cpu/armv7/zynq/ddrc.c
@@ -42,6 +42,8 @@ void zynq_ddrc_init(void)
*/
/* cppcheck-suppress nullPointer */
memset((void *)0, 0, 1 * 1024 * 1024);
+
+ gd->ram_size /= 2;
} else {
puts("ECC disabled ");
}
diff --git a/arch/arm/cpu/armv7/zynq/lowlevel_init.S b/arch/arm/cpu/armv7/zynq/lowlevel_init.S
new file mode 100644
index 0000000..6d714b7
--- /dev/null
+++ b/arch/arm/cpu/armv7/zynq/lowlevel_init.S
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2013 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+
+ /* Enable the the VFP */
+ mrc p15, 0, r1, c1, c0, 2
+ orr r1, r1, #(0x3 << 20)
+ orr r1, r1, #(0x3 << 20)
+ mcr p15, 0, r1, c1, c0, 2
+ isb
+ fmrx r1, FPEXC
+ orr r1,r1, #(1<<30)
+ fmxr FPEXC, r1
+
+ /* Move back to caller */
+ mov pc, lr
+
+ENDPROC(lowlevel_init)
diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
index 934ccc3..2521589 100644
--- a/arch/arm/cpu/armv7/zynq/slcr.c
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -132,7 +132,7 @@ void zynq_slcr_devcfg_disable(void)
zynq_slcr_unlock();
/* Disable AXI interface by asserting FPGA resets */
- writel(0xFFFFFFFF, &slcr_base->fpga_rst_ctrl);
+ writel(0xF, &slcr_base->fpga_rst_ctrl);
/* Set Level Shifters DT618760 */
writel(0xA, &slcr_base->lvl_shftr_en);
diff --git a/arch/arm/cpu/armv7/zynq/spl.c b/arch/arm/cpu/armv7/zynq/spl.c
index 0936bdd..b80c357 100644
--- a/arch/arm/cpu/armv7/zynq/spl.c
+++ b/arch/arm/cpu/armv7/zynq/spl.c
@@ -43,12 +43,21 @@ u32 spl_boot_device(void)
mode = BOOT_DEVICE_SPI;
break;
#endif
+ case ZYNQ_BM_NAND:
+ mode = BOOT_DEVICE_NAND;
+ break;
+ case ZYNQ_BM_NOR:
+ mode = BOOT_DEVICE_NOR;
+ break;
#ifdef CONFIG_SPL_MMC_SUPPORT
case ZYNQ_BM_SD:
puts("mmc boot\n");
mode = BOOT_DEVICE_MMC1;
break;
#endif
+ case ZYNQ_BM_JTAG:
+ mode = BOOT_DEVICE_RAM;
+ break;
default:
puts("Unsupported boot mode selected\n");
hang();
diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h
index 2aede0c..e2e0b73 100644
--- a/arch/arm/include/asm/arch-zynq/hardware.h
+++ b/arch/arm/include/asm/arch-zynq/hardware.h
@@ -21,6 +21,9 @@
#define ZYNQ_I2C_BASEADDR1 0xE0005000
#define ZYNQ_SPI_BASEADDR0 0xE0006000
#define ZYNQ_SPI_BASEADDR1 0xE0007000
+#define ZYNQ_QSPI_BASEADDR 0xE000D000
+#define ZYNQ_SMC_BASEADDR 0xE000E000
+#define ZYNQ_NAND_BASEADDR 0xE1000000
#define ZYNQ_DDRC_BASEADDR 0xF8006000
#define ZYNQ_EFUSE_BASEADDR 0xF800D000
#define ZYNQ_USB_BASEADDR0 0xE0002000
@@ -28,7 +31,9 @@
/* Bootmode setting values */
#define ZYNQ_BM_MASK 0x7
+#define ZYNQ_BM_QSPI 0x1
#define ZYNQ_BM_NOR 0x2
+#define ZYNQ_BM_NAND 0x4
#define ZYNQ_BM_SD 0x5
#define ZYNQ_BM_JTAG 0x0
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 3a2198f..738c31c 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -91,6 +91,14 @@ int board_late_init(void)
return 0;
}
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ puts("Board:\tXilinx Zynq\n");
+ return 0;
+}
+#endif
+
int board_eth_init(bd_t *bis)
{
u32 ret = 0;
@@ -115,11 +123,13 @@ int board_eth_init(bd_t *bis)
#if defined(CONFIG_ZYNQ_GEM)
# if defined(CONFIG_ZYNQ_GEM0)
ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0,
- CONFIG_ZYNQ_GEM_PHY_ADDR0, 0);
+ CONFIG_ZYNQ_GEM_PHY_ADDR0,
+ CONFIG_ZYNQ_GEM_EMIO0);
# endif
# if defined(CONFIG_ZYNQ_GEM1)
ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1,
- CONFIG_ZYNQ_GEM_PHY_ADDR1, 0);
+ CONFIG_ZYNQ_GEM_PHY_ADDR1,
+ CONFIG_ZYNQ_GEM_EMIO1);
# endif
#endif
return ret;
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
index 1ff27d5..3e2b8dc 100644
--- a/drivers/serial/serial_zynq.c
+++ b/drivers/serial/serial_zynq.c
@@ -27,14 +27,14 @@ DECLARE_GLOBAL_DATA_PTR;
#define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
struct uart_zynq {
- u32 control; /* Control Register [8:0] */
- u32 mode; /* Mode Register [10:0] */
+ u32 control; /* 0x0 - Control Register [8:0] */
+ u32 mode; /* 0x4 - Mode Register [10:0] */
u32 reserved1[4];
- u32 baud_rate_gen; /* Baud Rate Generator [15:0] */
+ u32 baud_rate_gen; /* 0x18 - Baud Rate Generator [15:0] */
u32 reserved2[4];
- u32 channel_sts; /* Channel Status [11:0] */
- u32 tx_rx_fifo; /* FIFO [15:0] or [7:0] */
- u32 baud_rate_divider; /* Baud Rate Divider [7:0] */
+ u32 channel_sts; /* 0x2c - Channel Status [11:0] */
+ u32 tx_rx_fifo; /* 0x30 - FIFO [15:0] or [7:0] */
+ u32 baud_rate_divider; /* 0x34 - Baud Rate Divider [7:0] */
};
static struct uart_zynq *uart_zynq_ports[2] = {
@@ -42,29 +42,13 @@ static struct uart_zynq *uart_zynq_ports[2] = {
[1] = (struct uart_zynq *)ZYNQ_SERIAL_BASEADDR1,
};
-#if !defined(CONFIG_ZYNQ_SERIAL_BAUDRATE0)
-# define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE
-#endif
-#if !defined(CONFIG_ZYNQ_SERIAL_BAUDRATE1)
-# define CONFIG_ZYNQ_SERIAL_BAUDRATE1 CONFIG_BAUDRATE
-#endif
-
-struct uart_zynq_params {
- u32 baudrate;
-};
-
-static struct uart_zynq_params uart_zynq_ports_param[2] = {
- [0].baudrate = CONFIG_ZYNQ_SERIAL_BAUDRATE0,
- [1].baudrate = CONFIG_ZYNQ_SERIAL_BAUDRATE1,
-};
-
/* Set up the baud rate in gd struct */
static void uart_zynq_serial_setbrg(const int port)
{
/* Calculation results. */
unsigned int calc_bauderror, bdiv, bgen;
unsigned long calc_baud = 0;
- unsigned long baud = uart_zynq_ports_param[port].baudrate;
+ unsigned long baud = gd->baudrate;
unsigned long clock = get_uart_clk(port);
struct uart_zynq *regs = uart_zynq_ports[port];
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 87b4fff..2d28e89 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -47,6 +47,17 @@
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# define CONFIG_PHYLIB
# define CONFIG_PHY_MARVELL
+# define CONFIG_BOOTP_SERVERIP
+# define CONFIG_BOOTP_BOOTPATH
+# define CONFIG_BOOTP_GATEWAY
+# define CONFIG_BOOTP_HOSTNAME
+# define CONFIG_BOOTP_MAY_FAIL
+# if !defined(CONFIG_ZYNQ_GEM_EMIO0)
+# define CONFIG_ZYNQ_GEM_EMIO0 0
+# endif
+# if !defined(CONFIG_ZYNQ_GEM_EMIO1)
+# define CONFIG_ZYNQ_GEM_EMIO1 0
+# endif
#endif
/* SPI */
@@ -90,6 +101,55 @@
# define CONFIG_USB_ULPI
# define CONFIG_EHCI_IS_TDI
# define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+
+# define CONFIG_CI_UDC /* ChipIdea CI13xxx UDC */
+# define CONFIG_USB_GADGET
+# define CONFIG_USB_GADGET_DUALSPEED
+# define CONFIG_USBDOWNLOAD_GADGET
+# define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x600000
+# define DFU_DEFAULT_POLL_TIMEOUT 300
+# define CONFIG_DFU_FUNCTION
+# define CONFIG_DFU_RAM
+# define CONFIG_USB_GADGET_VBUS_DRAW 2
+# define CONFIG_G_DNL_VENDOR_NUM 0x03FD
+# define CONFIG_G_DNL_PRODUCT_NUM 0x0300
+# define CONFIG_G_DNL_MANUFACTURER "Xilinx"
+# define CONFIG_USB_GADGET
+# define CONFIG_USB_CABLE_CHECK
+# define CONFIG_CMD_DFU
+# define CONFIG_CMD_THOR_DOWNLOAD
+# define CONFIG_THOR_FUNCTION
+# define DFU_ALT_INFO_RAM \
+ "dfu_ram_info=" \
+ "set dfu_alt_info " \
+ "${kernel_image} ram 0x3000000 0x500000\\\\;" \
+ "${devicetree_image} ram 0x2A00000 0x20000\\\\;" \
+ "${ramdisk_image} ram 0x2000000 0x600000\0" \
+ "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
+ "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
+
+# if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
+# define CONFIG_DFU_MMC
+# define DFU_ALT_INFO_MMC \
+ "dfu_mmc_info=" \
+ "set dfu_alt_info " \
+ "${kernel_image} fat 0 1\\\\;" \
+ "${devicetree_image} fat 0 1\\\\;" \
+ "${ramdisk_image} fat 0 1\0" \
+ "dfu_mmc=run dfu_mmc_info && dfu 0 mmc 0\0" \
+ "thor_mmc=run dfu_mmc_info && thordown 0 mmc 0\0"
+
+# define DFU_ALT_INFO \
+ DFU_ALT_INFO_RAM \
+ DFU_ALT_INFO_MMC
+# else
+# define DFU_ALT_INFO \
+ DFU_ALT_INFO_RAM
+# endif
+#endif
+
+#if !defined(DFU_ALT_INFO)
+# define DFU_ALT_INFO
#endif
#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
@@ -100,6 +160,7 @@
# define CONFIG_DOS_PARTITION
# define CONFIG_CMD_EXT4
# define CONFIG_CMD_EXT4_WRITE
+# define CONFIG_CMD_FS_GENERIC
#endif
#define CONFIG_SYS_I2C_ZYNQ
@@ -121,12 +182,6 @@
# define CONFIG_SYS_EEPROM_SIZE 1024 /* Bytes */
#endif
-#define CONFIG_BOOTP_SERVERIP
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_MAY_FAIL
-
/* Total Size of Environment Sector */
#define CONFIG_ENV_SIZE (128 << 10)
@@ -159,16 +214,17 @@
"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
"bootm ${load_addr}\0" \
"sdboot=echo Copying FIT from SD to RAM... && " \
- "fatload mmc 0 ${load_addr} ${fit_image} && " \
+ "load mmc 0 ${load_addr} ${fit_image} && " \
"bootm ${load_addr}\0" \
"jtagboot=echo TFTPing FIT to RAM... && " \
"tftpboot ${load_addr} ${fit_image} && " \
"bootm ${load_addr}\0" \
"usbboot=if usb start; then " \
"echo Copying FIT from USB to RAM... && " \
- "fatload usb 0 ${load_addr} ${fit_image} && " \
+ "load usb 0 ${load_addr} ${fit_image} && " \
"bootm ${load_addr}\0" \
- "fi\0"
+ "fi\0" \
+ DFU_ALT_INFO
#define CONFIG_BOOTCOMMAND "run $modeboot"
#define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */
@@ -181,6 +237,7 @@
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_LONGHELP
#define CONFIG_CLOCKS
#define CONFIG_CMD_CLK
@@ -198,7 +255,7 @@
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
-#define CONFIG_SYS_MALLOC_LEN 0x400000
+#define CONFIG_SYS_MALLOC_LEN 0xC00000
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
generated by cgit v1.1 at 2024-12-21 10:41:06 +0000