diff options
| -rw-r--r-- | board/armltd/vexpress64/Makefile | 2 | ||||
| -rw-r--r-- | board/armltd/vexpress64/pcie.c | 197 | ||||
| -rw-r--r-- | board/armltd/vexpress64/pcie.h | 6 | ||||
| -rw-r--r-- | board/armltd/vexpress64/vexpress64.c | 2 |
4 files changed, 206 insertions, 1 deletions
diff --git a/board/armltd/vexpress64/Makefile b/board/armltd/vexpress64/Makefile index e009141..a35db40 100644 --- a/board/armltd/vexpress64/Makefile +++ b/board/armltd/vexpress64/Makefile @@ -5,4 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y := vexpress64.o +obj-y := vexpress64.o pcie.o diff --git a/board/armltd/vexpress64/pcie.c b/board/armltd/vexpress64/pcie.c new file mode 100644 index 0000000..7b999e8 --- /dev/null +++ b/board/armltd/vexpress64/pcie.c @@ -0,0 +1,197 @@ +/* + * Copyright (C) ARM Ltd 2015 + * + * Author: Liviu Dudau <Liviu.Dudau@arm.com> + * + * SPDX-Licence-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <linux/bitops.h> +#include <pci_ids.h> +#include "pcie.h" + +/* XpressRICH3 support */ +#define XR3_CONFIG_BASE 0x7ff30000 +#define XR3_RESET_BASE 0x7ff20000 + +#define XR3_PCI_ECAM_START 0x40000000 +#define XR3_PCI_ECAM_SIZE 28 /* as power of 2 = 0x10000000 */ +#define XR3_PCI_IOSPACE_START 0x5f800000 +#define XR3_PCI_IOSPACE_SIZE 23 /* as power of 2 = 0x800000 */ +#define XR3_PCI_MEMSPACE_START 0x50000000 +#define XR3_PCI_MEMSPACE_SIZE 27 /* as power of 2 = 0x8000000 */ +#define XR3_PCI_MEMSPACE64_START 0x4000000000 +#define XR3_PCI_MEMSPACE64_SIZE 33 /* as power of 2 = 0x200000000 */ + +#define JUNO_V2M_MSI_START 0x2c1c0000 +#define JUNO_V2M_MSI_SIZE 12 /* as power of 2 = 4096 */ + +#define XR3PCI_BASIC_STATUS 0x18 +#define XR3PCI_BS_GEN_MASK (0xf << 8) +#define XR3PCI_BS_LINK_MASK 0xff + +#define XR3PCI_VIRTCHAN_CREDITS 0x90 +#define XR3PCI_BRIDGE_PCI_IDS 0x9c +#define XR3PCI_PEX_SPC2 0xd8 + +#define XR3PCI_ATR_PCIE_WIN0 0x600 +#define XR3PCI_ATR_PCIE_WIN1 0x700 +#define XR3PCI_ATR_AXI4_SLV0 0x800 + +#define XR3PCI_ATR_TABLE_SIZE 0x20 +#define XR3PCI_ATR_SRC_ADDR_LOW 0x0 +#define XR3PCI_ATR_SRC_ADDR_HIGH 0x4 +#define XR3PCI_ATR_TRSL_ADDR_LOW 0x8 +#define XR3PCI_ATR_TRSL_ADDR_HIGH 0xc +#define XR3PCI_ATR_TRSL_PARAM 0x10 + +/* IDs used in the XR3PCI_ATR_TRSL_PARAM */ +#define XR3PCI_ATR_TRSLID_AXIDEVICE (0x420004) +#define XR3PCI_ATR_TRSLID_AXIMEMORY (0x4e0004) /* Write-through, read/write allocate */ +#define XR3PCI_ATR_TRSLID_PCIE_CONF (0x000001) +#define XR3PCI_ATR_TRSLID_PCIE_IO (0x020000) +#define XR3PCI_ATR_TRSLID_PCIE_MEMORY (0x000000) + +#define XR3PCI_ECAM_OFFSET(b, d, o) (((b) << 20) | \ + (PCI_SLOT(d) << 15) | \ + (PCI_FUNC(d) << 12) | o) + +#define JUNO_RESET_CTRL 0x1004 +#define JUNO_RESET_CTRL_PHY BIT(0) +#define JUNO_RESET_CTRL_RC BIT(1) + +#define JUNO_RESET_STATUS 0x1008 +#define JUNO_RESET_STATUS_PLL BIT(0) +#define JUNO_RESET_STATUS_PHY BIT(1) +#define JUNO_RESET_STATUS_RC BIT(2) +#define JUNO_RESET_STATUS_MASK (JUNO_RESET_STATUS_PLL | \ + JUNO_RESET_STATUS_PHY | \ + JUNO_RESET_STATUS_RC) + +void xr3pci_set_atr_entry(unsigned long base, unsigned long src_addr, + unsigned long trsl_addr, int window_size, + int trsl_param) +{ + /* X3PCI_ATR_SRC_ADDR_LOW: + - bit 0: enable entry, + - bits 1-6: ATR window size: total size in bytes: 2^(ATR_WSIZE + 1) + - bits 7-11: reserved + - bits 12-31: start of source address + */ + writel((u32)(src_addr & 0xfffff000) | (window_size - 1) << 1 | 1, + base + XR3PCI_ATR_SRC_ADDR_LOW); + writel((u32)(src_addr >> 32), base + XR3PCI_ATR_SRC_ADDR_HIGH); + writel((u32)(trsl_addr & 0xfffff000), base + XR3PCI_ATR_TRSL_ADDR_LOW); + writel((u32)(trsl_addr >> 32), base + XR3PCI_ATR_TRSL_ADDR_HIGH); + writel(trsl_param, base + XR3PCI_ATR_TRSL_PARAM); + + printf("ATR entry: 0x%010lx %s 0x%010lx [0x%010llx] (param: 0x%06x)\n", + src_addr, (trsl_param & 0x400000) ? "<-" : "->", trsl_addr, + ((u64)1) << window_size, trsl_param); +} + +void xr3pci_setup_atr(void) +{ + /* setup PCIe to CPU address translation tables */ + unsigned long base = XR3_CONFIG_BASE + XR3PCI_ATR_PCIE_WIN0; + + /* forward all writes from PCIe to GIC V2M (used for MSI) */ + xr3pci_set_atr_entry(base, JUNO_V2M_MSI_START, JUNO_V2M_MSI_START, + JUNO_V2M_MSI_SIZE, XR3PCI_ATR_TRSLID_AXIDEVICE); + + base += XR3PCI_ATR_TABLE_SIZE; + + /* PCIe devices can write anywhere in memory */ + xr3pci_set_atr_entry(base, PHYS_SDRAM_1, PHYS_SDRAM_1, + 31 /* grant access to all RAM under 4GB */, + XR3PCI_ATR_TRSLID_AXIMEMORY); + base += XR3PCI_ATR_TABLE_SIZE; + xr3pci_set_atr_entry(base, PHYS_SDRAM_2, PHYS_SDRAM_2, + XR3_PCI_MEMSPACE64_SIZE, + XR3PCI_ATR_TRSLID_AXIMEMORY); + + + /* setup CPU to PCIe address translation table */ + base = XR3_CONFIG_BASE + XR3PCI_ATR_AXI4_SLV0; + + /* setup ECAM space to bus configuration interface */ + xr3pci_set_atr_entry(base, XR3_PCI_ECAM_START, 0, XR3_PCI_ECAM_SIZE, + XR3PCI_ATR_TRSLID_PCIE_CONF); + + base += XR3PCI_ATR_TABLE_SIZE; + + /* setup IO space translation */ + xr3pci_set_atr_entry(base, XR3_PCI_IOSPACE_START, XR3_PCI_IOSPACE_START, + XR3_PCI_IOSPACE_SIZE, XR3PCI_ATR_TRSLID_PCIE_IO); + + base += XR3PCI_ATR_TABLE_SIZE; + + /* setup 32bit MEM space translation */ + xr3pci_set_atr_entry(base, XR3_PCI_MEMSPACE_START, XR3_PCI_MEMSPACE_START, + XR3_PCI_MEMSPACE_SIZE, XR3PCI_ATR_TRSLID_PCIE_MEMORY); + + base += XR3PCI_ATR_TABLE_SIZE; + + /* setup 64bit MEM space translation */ + xr3pci_set_atr_entry(base, XR3_PCI_MEMSPACE64_START, XR3_PCI_MEMSPACE64_START, + XR3_PCI_MEMSPACE64_SIZE, XR3PCI_ATR_TRSLID_PCIE_MEMORY); +} + +void xr3pci_init(void) +{ + u32 val; + int timeout = 200; + + /* Initialise the XpressRICH3 PCIe host bridge */ + + /* add credits */ + writel(0x00f0b818, XR3_CONFIG_BASE + XR3PCI_VIRTCHAN_CREDITS); + writel(0x1, XR3_CONFIG_BASE + XR3PCI_VIRTCHAN_CREDITS + 4); + /* allow ECRC */ + writel(0x6006, XR3_CONFIG_BASE + XR3PCI_PEX_SPC2); + /* setup the correct class code for the host bridge */ + writel(PCI_CLASS_BRIDGE_PCI << 16, XR3_CONFIG_BASE + XR3PCI_BRIDGE_PCI_IDS); + + /* reset phy and root complex */ + writel(JUNO_RESET_CTRL_PHY | JUNO_RESET_CTRL_RC, + XR3_RESET_BASE + JUNO_RESET_CTRL); + + do { + mdelay(1); + val = readl(XR3_RESET_BASE + JUNO_RESET_STATUS); + } while (--timeout && + (val & JUNO_RESET_STATUS_MASK) != JUNO_RESET_STATUS_MASK); + + if (!timeout) { + printf("PCI XR3 Root complex reset timed out\n"); + return; + } + + /* Wait for the link to train */ + mdelay(20); + timeout = 20; + + do { + mdelay(1); + val = readl(XR3_CONFIG_BASE + XR3PCI_BASIC_STATUS); + } while (--timeout && !(val & XR3PCI_BS_LINK_MASK)); + + if (!(val & XR3PCI_BS_LINK_MASK)) { + printf("Failed to negotiate a link!\n"); + return; + } + + printf("PCIe XR3 Host Bridge enabled: x%d link (Gen %d)\n", + val & XR3PCI_BS_LINK_MASK, (val & XR3PCI_BS_GEN_MASK) >> 8); + + xr3pci_setup_atr(); +} + +void vexpress64_pcie_init(void) +{ +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO + xr3pci_init(); +#endif +} diff --git a/board/armltd/vexpress64/pcie.h b/board/armltd/vexpress64/pcie.h new file mode 100644 index 0000000..14642f4 --- /dev/null +++ b/board/armltd/vexpress64/pcie.h @@ -0,0 +1,6 @@ +#ifndef __VEXPRESS64_PCIE_H__ +#define __VEXPRESS64_PCIE_H__ + +void vexpress64_pcie_init(void); + +#endif /* __VEXPRESS64_PCIE_H__ */ diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c index 6df9d60..f4e8084 100644 --- a/board/armltd/vexpress64/vexpress64.c +++ b/board/armltd/vexpress64/vexpress64.c @@ -13,6 +13,7 @@ #include <linux/compiler.h> #include <dm/platdata.h> #include <dm/platform_data/serial_pl01x.h> +#include "pcie.h" DECLARE_GLOBAL_DATA_PTR; @@ -29,6 +30,7 @@ U_BOOT_DEVICE(vexpress_serials) = { int board_init(void) { + vexpress64_pcie_init(); return 0; } |