diff options
author | Ye.Li <B37916@freescale.com> | 2014-06-10 17:58:05 +0800 |
---|---|---|
committer | Ye.Li <B37916@freescale.com> | 2014-06-17 11:13:53 +0800 |
commit | dd32db7e21d849e70958ef3584f7b2b0265f8289 (patch) | |
tree | c1f6c182927520ada7550bb432725cde7ae8cb23 /tools | |
parent | b18346b6b48dc23f1095208b4157164c001ad9e5 (diff) | |
download | u-boot-imx-dd32db7e21d849e70958ef3584f7b2b0265f8289.zip u-boot-imx-dd32db7e21d849e70958ef3584f7b2b0265f8289.tar.gz u-boot-imx-dd32db7e21d849e70958ef3584f7b2b0265f8289.tar.bz2 |
ENGR00315894-50 QuadSPI: Add Freescale QuadSPI driver
Enable the Quadspi read/write/erase functions.
Add two configurations "CONFIG_QSPI_BASE" and "CONFIG_QSPI_MEMMAP_BASE"
for QSPI registers base and AHB memory base.
Use "bus" and "cs" parameters to denote 4 flash chip connected on one QuadSPI:
SFA1: bus 0, cs 0
SFA2: bus 0, cs 1
SFB1: bus 1, cs 0
SFB2: bus 1, cs 1
Currently in uboot, the SPI flash framework does not have way to notify the
flash size to the driver. It brings a problem for QSPI driver to set the memory
map space of each chip. In this patch, we fix the mem map space of each chip
to 64MB(total is 256MB). So for each flash device, driver support 64MB at most.
In addition, because u-boot SPI flash framework only supports 24bits address mode,
and uses EAR register to switch bank for flash larger than 16MB. The QuadSPI does
not support this way when reading data from AHB address. Thus, only lower 16MB
is supported.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Allen Xu <b45815@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
Diffstat (limited to 'tools')
0 files changed, 0 insertions, 0 deletions