summaryrefslogtreecommitdiff
path: root/tools
diff options
context:
space:
mode:
authorEric Nelson <eric@nelint.com>2016-10-30 16:33:48 -0700
committerStefano Babic <sbabic@denx.de>2016-11-29 16:40:12 +0100
commit7f17fb7400ff091dd48f86977655c6a57d06b17c (patch)
tree3fffa58f57820093a9c8877e09d52602d830f03e /tools
parentb33f74ead4dfd1ec0b500dc3d1cfef0e308b45c3 (diff)
downloadu-boot-imx-7f17fb7400ff091dd48f86977655c6a57d06b17c.zip
u-boot-imx-7f17fb7400ff091dd48f86977655c6a57d06b17c.tar.gz
u-boot-imx-7f17fb7400ff091dd48f86977655c6a57d06b17c.tar.bz2
mx6: ddr: pass mx6_ddr_sysinfo to calibration routines
The DDR calibration routines have scattered support for bus widths other than 64-bits: -- The mmdc_do_write_level_calibration() routine assumes the presence of PHY1, and -- The mmdc_do_dqs_calibration() routine tries to determine whether one or two DDR PHYs are active by reading MDCTL. Since a caller of these routines must have a valid struct mx6_ddr_sysinfo for use in calling mx6_dram_cfg(), and the bus width is available in the "dsize" field, use this structure to inform the calibration routines which PHYs are active. This allows the use of the DDR calibration routines on CPU variants like i.MX6SL that only have a single MMDC port. Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Marek Vasut <marex@denx.de>
Diffstat (limited to 'tools')
0 files changed, 0 insertions, 0 deletions