diff options
| author | Yangbo Lu <yangbo.lu@nxp.com> | 2017-01-17 10:43:56 +0800 |
|---|---|---|
| committer | York Sun <york.sun@nxp.com> | 2017-01-18 09:46:52 -0800 |
| commit | 5e4a6db8f428cb1f8ced74bc77241144ac0c5b1a (patch) | |
| tree | cb89c30f95cc16f7c0927302d3059bafe1d554ad /post/drivers | |
| parent | 208e1ae8d1668278fe46f13d8d7c0e40f7cdc6ec (diff) | |
| download | u-boot-imx-5e4a6db8f428cb1f8ced74bc77241144ac0c5b1a.zip u-boot-imx-5e4a6db8f428cb1f8ced74bc77241144ac0c5b1a.tar.gz u-boot-imx-5e4a6db8f428cb1f8ced74bc77241144ac0c5b1a.tar.bz2 | |
armv8: ls1012a: define esdhc_status_fixup for RDB board
On LS1012ARDB board, three dual 1:4 mux/demux devices drive the SDHC2
signals to eMMC, SDIO wifi, SPI and Ardiuno shield. Only when we select
eMMC and SDIO wifi, the SDHC2 could be used. Otherwise, the command
inhibit bits of eSDHC2_PRSSTAT register will never release. This would
cause below continious error messages in linux since it uses polling
mode to detect card.
"mmc1: Controller never released inhibit bit(s)."
"mmc1: Controller never released inhibit bit(s)."
"mmc1: Controller never released inhibit bit(s)."
This patch is to define esdhc_status_fixup function for RDB to disable
SDHC2 status if no SDIO wifi or eMMC is selected.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Diffstat (limited to 'post/drivers')
0 files changed, 0 insertions, 0 deletions