summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-04-15 23:14:49 +0000
committerwdenk <wdenk>2004-04-15 23:14:49 +0000
commitdb01a2ea991b539ffbd36ab952fcf2e754789a83 (patch)
tree8514a5df0b86fe3315a29fd9068093da43f3b3ca /include
parentbda6c8aece36f4f21cb041f518d09c26e4fb47eb (diff)
downloadu-boot-imx-db01a2ea991b539ffbd36ab952fcf2e754789a83.zip
u-boot-imx-db01a2ea991b539ffbd36ab952fcf2e754789a83.tar.gz
u-boot-imx-db01a2ea991b539ffbd36ab952fcf2e754789a83.tar.bz2
* Patch by Stephen Williams, 01 Apr 2004:
Add support for Picture Elements JSE board * Patch by Christian Pell, 01 Apr 2004: Add CompactFlash support for PXA systems.
Diffstat (limited to 'include')
-rw-r--r--include/configs/JSE.h304
-rw-r--r--include/fat.h7
2 files changed, 311 insertions, 0 deletions
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
new file mode 100644
index 0000000..4dd7d89
--- /dev/null
+++ b/include/configs/JSE.h
@@ -0,0 +1,304 @@
+/*
+ * (C) Copyright 2003 Picture Elements, Inc.
+ * Stephen Williams <steve@icarus.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options for the JSE board
+ * (Theoretically easy to change, but the board is fixed.)
+ */
+
+#define CONFIG_JSE 1
+ /* JSE has a PPC405GPr */
+#define CONFIG_405GP 1
+ /* ... which is a 4xxx series */
+#define CONFIG_4xx 1
+ /* ... with a 33MHz OSC. connected to the SysCLK input */
+#define CONFIG_SYS_CLK_FREQ 33333333
+ /* ... with on-chip memory here (4KBytes) */
+#define CFG_OCM_DATA_ADDR 0xF4000000
+#define CFG_OCM_DATA_SIZE 0x00001000
+ /* Do not set up locked dcache as init ram. */
+#undef CFG_INIT_DCACHE_CS
+
+ /* Map the SystemACE chip (CS#1) here. (Must be a multiple of 1Meg) */
+#define CONFIG_SYSTEMACE 1
+#define CFG_SYSTEMACE_BASE 0xf0000000
+#define CONFIG_DOS_PARTITION 1
+
+ /* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */
+#define CFG_TEMP_STACK_OCM 1
+ /* ... place INIT RAM in the OCM address */
+# define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR
+ /* ... give it the whole init ram */
+# define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE
+ /* ... Shave a bit off the end for global data */
+# define CFG_GBL_DATA_SIZE 128
+# define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+ /* ... and place the stack pointer at the top of what's left. */
+# define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+ /* Enable board_pre_init function */
+#define CONFIG_BOARD_PRE_INIT 1
+#define CONFIG_BOARD_EARLY_INIT_F 1
+ /* Disable post-clk setup init function */
+#undef CONFIG_BOARD_POSTCLK_INIT
+ /* Disable call to post_init_f: late init function. */
+#undef CONFIG_POST
+ /* Enable DRAM test. */
+#define CFG_DRAM_TEST 1
+ /* Enable misc_init_r function. */
+#define CONFIG_MISC_INIT_R 1
+
+ /* JSE has EEPROM chips that are good for environment. */
+#undef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_IS_IN_EEPROM 1
+#undef CFG_ENV_IS_NOWHERE
+
+ /* This is the 7bit address of the device, not including P. */
+#define CFG_I2C_EEPROM_ADDR 0x50
+ /* After the device address, need one more address byte. */
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+ /* The EEPROM is 512 bytes. */
+#define CFG_EEPROM_SIZE 512
+ /* The EEPROM can do 16byte ( 1 << 4 ) page writes. */
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+ /* Put the environment in the second half. */
+#define CFG_ENV_OFFSET 0x00
+#define CFG_ENV_SIZE 512
+
+
+ /* The JSE connects UART1 to the console tap connector. */
+#define CONFIG_UART1_CONSOLE 1
+ /* Set console baudrate to 9600 */
+#define CONFIG_BAUDRATE 9600
+
+/* Size (bytes) of interrupt driven serial port buffer.
+ * Set to 0 to use polling instead of interrupts.
+ * Setting to 0 will also disable RTS/CTS handshaking.
+ */
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+
+/*
+ * Configuration related to auto-boot.
+ *
+ * CONFIG_BOOTDELAY sets the delay (in seconds) that U-Boot will wait
+ * before resorting to autoboot. This value can be overridden by the
+ * bootdelay environment variable.
+ *
+ * CONFIG_AUTOBOOT_PROMPT is the string that U-Boot emits to warn the
+ * user that an autoboot will happen.
+ *
+ * CONFIG_BOOTCOMMAND is the sequence of commands that U-Boot will
+ * execute to boot the JSE. This loads the uimage and initrd.img files
+ * from CompactFlash into memory, then boots them from memory.
+ *
+ * CONFIG_BOOTARGS is the arguments passed to the Linux kernel to get
+ * it going on the JSE.
+ */
+#define CONFIG_BOOTDELAY 5
+#define CONFIG_BOOTARGS "root=/dev/ram0 init=/linuxrc rw"
+#define CONFIG_BOOTCOMMAND "fatload ace 0 2000000 uimage; fatload ace 0 2100000 initrd.img; bootm 2000000 2100000"
+
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 1 /* PHY address */
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_PCI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_FLASH | \
+ CFG_CMD_NET | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_PING | \
+ CFG_CMD_MII | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_FAT | \
+ CFG_CMD_ELF )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+ /* watchdog disabled */
+#undef CONFIG_WATCHDOG
+ /* SPD EEPROM (sdram speed config) disabled */
+#undef CONFIG_SPD_EEPRO
+#undef SPD_EEPROM_ADDRESS
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#define CFG_HUSH_PARSER /* use "hush" command parser */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+/*
+ * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * The Linux BASE_BAUD define should match this configuration.
+ * baseBaud = cpuClock/(uartDivisor*16)
+ * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * set Linux BASE_BAUD to 403200.
+ */
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
+#define CFG_BASE_BAUD 691200
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#undef CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
+#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+
+/*-----------------------------------------------------------------------
+ * External peripheral base address
+ *-----------------------------------------------------------------------
+ */
+#undef CONFIG_IDE_LED /* no led for ide supported */
+#undef CONFIG_IDE_RESET /* no reset for ide supported */
+
+#define CFG_KEY_REG_BASE_ADDR 0xF0100000
+#define CFG_IR_REG_BASE_ADDR 0xF0200000
+#define CFG_FPGA_REG_BASE_ADDR 0xF0300000
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFF80000
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 16384 /* For IBM 405GPr CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
+
+
+/* Configuration Port location */
+#define CONFIG_PORT_ADDR 0xF0000500
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/fat.h b/include/fat.h
index 13910f9..3e7c91c 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -210,4 +210,11 @@ long file_fat_read(const char *filename, void *buffer, unsigned long maxsize);
const char *file_getfsname(int idx);
int fat_register_device(block_dev_desc_t *dev_desc, int part_no);
+#ifdef CONFIG_PXA250
+#undef FAT2CPU16
+#define FAT2CPU16(x) x
+#undef FAT2CPU32
+#define FAT2CPU32(x) x
+#endif
+
#endif /* _FAT_H_ */