summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2008-04-11 15:11:26 +0200
committerWolfgang Denk <wd@denx.de>2008-04-11 15:11:26 +0200
commit950a392464e616b4590bc4501be46e2d7d162dea (patch)
treee33be5df8d39072af358f9e1febad383714cccc7 /include
parentaeff6d503b6006573d5c6b04fc658a64bebee5fa (diff)
downloadu-boot-imx-950a392464e616b4590bc4501be46e2d7d162dea.zip
u-boot-imx-950a392464e616b4590bc4501be46e2d7d162dea.tar.gz
u-boot-imx-950a392464e616b4590bc4501be46e2d7d162dea.tar.bz2
Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
Reverting became necessary after it turned out that the patches in the u-boot-arm repo were modified, and in some cases corrupted. This reverts the following commits: 066bebd6353e33af3adefc3404560871699e9961 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6 c88ae20580b2b01487b4cdcc8b2a113f551aee36 a147e56f03871bba4f05058d5e04ce7deb010b04 d6674e0e2a6a1f033945f78838566210d3f28c95 8c8463cce44d849e37744749b32d38e1dfb12e50 c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d 8bf69d81782619187933a605f1a95ee1d069478d 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d a574a73852a527779234e73e17e7597fd8128882 1377b5583a48021d983e1fd565f7d40c89e84d63 1704dc20917b4f71e373e2c888497ee666d40380 Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'include')
-rw-r--r--include/asm-arm/arch-arm1136/bits.h (renamed from include/asm-arm/arch-omap24xx/bits.h)0
-rw-r--r--include/asm-arm/arch-arm1136/clocks.h (renamed from include/asm-arm/arch-omap24xx/clocks.h)0
-rw-r--r--include/asm-arm/arch-arm1136/i2c.h (renamed from include/asm-arm/arch-omap24xx/i2c.h)0
-rw-r--r--include/asm-arm/arch-arm1136/mem.h (renamed from include/asm-arm/arch-omap24xx/mem.h)0
-rw-r--r--include/asm-arm/arch-arm1136/mux.h (renamed from include/asm-arm/arch-omap24xx/mux.h)0
-rw-r--r--include/asm-arm/arch-arm1136/omap2420.h (renamed from include/asm-arm/arch-omap24xx/omap2420.h)0
-rw-r--r--include/asm-arm/arch-arm1136/sizes.h (renamed from include/asm-arm/arch-omap24xx/sizes.h)0
-rw-r--r--include/asm-arm/arch-arm1136/sys_info.h (renamed from include/asm-arm/arch-omap24xx/sys_info.h)0
-rw-r--r--include/asm-arm/arch-arm1136/sys_proto.h (renamed from include/asm-arm/arch-omap24xx/sys_proto.h)0
-rw-r--r--include/asm-arm/arch-davinci/hardware.h2
-rw-r--r--include/asm-arm/arch-mx31/mx31-regs.h151
-rw-r--r--include/asm-arm/arch-mx31/mx31.h32
-rw-r--r--include/configs/davinci_dvevm.h44
-rw-r--r--include/configs/davinci_schmoogie.h19
-rw-r--r--include/configs/davinci_sonata.h18
-rw-r--r--include/configs/imx31_litekit.h167
-rw-r--r--include/configs/imx31_phycore.h190
-rw-r--r--include/configs/mx31ads.h170
-rw-r--r--include/configs/pmdra.h186
19 files changed, 9 insertions, 970 deletions
diff --git a/include/asm-arm/arch-omap24xx/bits.h b/include/asm-arm/arch-arm1136/bits.h
index 8522335..8522335 100644
--- a/include/asm-arm/arch-omap24xx/bits.h
+++ b/include/asm-arm/arch-arm1136/bits.h
diff --git a/include/asm-arm/arch-omap24xx/clocks.h b/include/asm-arm/arch-arm1136/clocks.h
index 2a95af1..2a95af1 100644
--- a/include/asm-arm/arch-omap24xx/clocks.h
+++ b/include/asm-arm/arch-arm1136/clocks.h
diff --git a/include/asm-arm/arch-omap24xx/i2c.h b/include/asm-arm/arch-arm1136/i2c.h
index 7248950..7248950 100644
--- a/include/asm-arm/arch-omap24xx/i2c.h
+++ b/include/asm-arm/arch-arm1136/i2c.h
diff --git a/include/asm-arm/arch-omap24xx/mem.h b/include/asm-arm/arch-arm1136/mem.h
index c81f1c4..c81f1c4 100644
--- a/include/asm-arm/arch-omap24xx/mem.h
+++ b/include/asm-arm/arch-arm1136/mem.h
diff --git a/include/asm-arm/arch-omap24xx/mux.h b/include/asm-arm/arch-arm1136/mux.h
index 4fdb9c6..4fdb9c6 100644
--- a/include/asm-arm/arch-omap24xx/mux.h
+++ b/include/asm-arm/arch-arm1136/mux.h
diff --git a/include/asm-arm/arch-omap24xx/omap2420.h b/include/asm-arm/arch-arm1136/omap2420.h
index 0c11bec..0c11bec 100644
--- a/include/asm-arm/arch-omap24xx/omap2420.h
+++ b/include/asm-arm/arch-arm1136/omap2420.h
diff --git a/include/asm-arm/arch-omap24xx/sizes.h b/include/asm-arm/arch-arm1136/sizes.h
index aaba18f..aaba18f 100644
--- a/include/asm-arm/arch-omap24xx/sizes.h
+++ b/include/asm-arm/arch-arm1136/sizes.h
diff --git a/include/asm-arm/arch-omap24xx/sys_info.h b/include/asm-arm/arch-arm1136/sys_info.h
index 53c231a..53c231a 100644
--- a/include/asm-arm/arch-omap24xx/sys_info.h
+++ b/include/asm-arm/arch-arm1136/sys_info.h
diff --git a/include/asm-arm/arch-omap24xx/sys_proto.h b/include/asm-arm/arch-arm1136/sys_proto.h
index 9d8e5b2..9d8e5b2 100644
--- a/include/asm-arm/arch-omap24xx/sys_proto.h
+++ b/include/asm-arm/arch-arm1136/sys_proto.h
diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h
index 2b3eb90..ebcdcfe 100644
--- a/include/asm-arm/arch-davinci/hardware.h
+++ b/include/asm-arm/arch-davinci/hardware.h
@@ -150,8 +150,6 @@ typedef volatile unsigned int * dv_reg_p;
#define VDD3P3V_PWDN (0x01c40048)
#define UART0_PWREMU_MGMT (0x01c20030)
-#define UART1_PWREMU_MGMT (0x01c20430)
-#define UART2_PWREMU_MGMT (0x01c20830)
#define PSC_SILVER_BULLET (0x01c41a20)
diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h
deleted file mode 100644
index 2f0d809..0000000
--- a/include/asm-arm/arch-mx31/mx31-regs.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MX31_REGS_H
-#define __ASM_ARCH_MX31_REGS_H
-
-#define __REG(x) (*((volatile u32 *)(x)))
-#define __REG16(x) (*((volatile u16 *)(x)))
-#define __REG8(x) (*((volatile u8 *)(x)))
-
-#define CCM_BASE 0x53f80000
-#define CCM_CCMR (CCM_BASE + 0x00)
-#define CCM_PDR0 (CCM_BASE + 0x04)
-#define CCM_PDR1 (CCM_BASE + 0x08)
-#define CCM_RCSR (CCM_BASE + 0x0c)
-#define CCM_MPCTL (CCM_BASE + 0x10)
-#define CCM_UPCTL (CCM_BASE + 0x10)
-#define CCM_SPCTL (CCM_BASE + 0x18)
-#define CCM_COSR (CCM_BASE + 0x1C)
-
-#define CCMR_MDS (1 << 7)
-#define CCMR_SBYCS (1 << 4)
-#define CCMR_MPE (1 << 3)
-#define CCMR_PRCS_MASK (3 << 1)
-#define CCMR_FPM (1 << 1)
-#define CCMR_CKIH (2 << 1)
-
-#define PDR0_CSI_PODF(x) (((x) & 0x1ff) << 23)
-#define PDR0_PER_PODF(x) (((x) & 0x1f) << 16)
-#define PDR0_HSP_PODF(x) (((x) & 0x7) << 11)
-#define PDR0_NFC_PODF(x) (((x) & 0x7) << 8)
-#define PDR0_IPG_PODF(x) (((x) & 0x3) << 6)
-#define PDR0_MAX_PODF(x) (((x) & 0x7) << 3)
-#define PDR0_MCU_PODF(x) ((x) & 0x7)
-
-#define PLL_PD(x) (((x) & 0xf) << 26)
-#define PLL_MFD(x) (((x) & 0x3ff) << 16)
-#define PLL_MFI(x) (((x) & 0xf) << 10)
-#define PLL_MFN(x) (((x) & 0x3ff) << 0)
-
-#define WEIM_BASE 0xb8002000
-#define CSCR_U(x) (WEIM_BASE + (x) * 0x10)
-#define CSCR_L(x) (WEIM_BASE + 4 + (x) * 0x10)
-#define CSCR_A(x) (WEIM_BASE + 8 + (x) * 0x10)
-
-#define IOMUXC_BASE 0x43FAC000
-#define IOMUXC_GPR (IOMUXC_BASE + 0x8)
-#define IOMUXC_SW_MUX_CTL(x) (IOMUXC_BASE + 0xc + (x) * 4)
-#define IOMUXC_SW_PAD_CTL(x) (IOMUXC_BASE + 0x154 + (x) * 4)
-
-#define IPU_BASE 0x53fc0000
-#define IPU_CONF IPU_BASE
-
-#define IPU_CONF_PXL_ENDIAN (1<<8)
-#define IPU_CONF_DU_EN (1<<7)
-#define IPU_CONF_DI_EN (1<<6)
-#define IPU_CONF_ADC_EN (1<<5)
-#define IPU_CONF_SDC_EN (1<<4)
-#define IPU_CONF_PF_EN (1<<3)
-#define IPU_CONF_ROT_EN (1<<2)
-#define IPU_CONF_IC_EN (1<<1)
-#define IPU_CONF_SCI_EN (1<<0)
-
-#define WDOG_BASE 0x53FDC000
-
-/*
- * Signal Multiplexing (IOMUX)
- */
-
-/* bits in the SW_MUX_CTL registers */
-#define MUX_CTL_OUT_GPIO_DR (0 << 4)
-#define MUX_CTL_OUT_FUNC (1 << 4)
-#define MUX_CTL_OUT_ALT1 (2 << 4)
-#define MUX_CTL_OUT_ALT2 (3 << 4)
-#define MUX_CTL_OUT_ALT3 (4 << 4)
-#define MUX_CTL_OUT_ALT4 (5 << 4)
-#define MUX_CTL_OUT_ALT5 (6 << 4)
-#define MUX_CTL_OUT_ALT6 (7 << 4)
-#define MUX_CTL_IN_NONE (0 << 0)
-#define MUX_CTL_IN_GPIO (1 << 0)
-#define MUX_CTL_IN_FUNC (2 << 0)
-#define MUX_CTL_IN_ALT1 (4 << 0)
-#define MUX_CTL_IN_ALT2 (8 << 0)
-
-#define MUX_CTL_FUNC (MUX_CTL_OUT_FUNC | MUX_CTL_IN_FUNC)
-#define MUX_CTL_ALT1 (MUX_CTL_OUT_ALT1 | MUX_CTL_IN_ALT1)
-#define MUX_CTL_ALT2 (MUX_CTL_OUT_ALT2 | MUX_CTL_IN_ALT2)
-#define MUX_CTL_GPIO (MUX_CTL_OUT_GPIO_DR | MUX_CTL_IN_GPIO)
-
-/* Register offsets based on IOMUXC_BASE */
-/* 0x00 .. 0x7b */
-#define MUX_CTL_RTS1 0x7c
-#define MUX_CTL_CTS1 0x7d
-#define MUX_CTL_DTR_DCE1 0x7e
-#define MUX_CTL_DSR_DCE1 0x7f
-#define MUX_CTL_CSPI2_SCLK 0x80
-#define MUX_CTL_CSPI2_SPI_RDY 0x81
-#define MUX_CTL_RXD1 0x82
-#define MUX_CTL_TXD1 0x83
-#define MUX_CTL_CSPI2_MISO 0x84
-/* 0x85 .. 0x8a */
-#define MUX_CTL_CSPI2_MOSI 0x8b
-
-/* The modes a specific pin can be in
- * these macros can be used in mx31_gpio_mux() and have the form
- * MUX_[contact name]__[pin function]
- */
-#define MUX_RXD1__UART1_RXD_MUX ((MUX_CTL_FUNC << 8) | MUX_CTL_RXD1)
-#define MUX_TXD1__UART1_TXD_MUX ((MUX_CTL_FUNC << 8) | MUX_CTL_TXD1)
-#define MUX_RTS1__UART1_RTS_B ((MUX_CTL_FUNC << 8) | MUX_CTL_RTS1)
-#define MUX_RTS1__UART1_CTS_B ((MUX_CTL_FUNC << 8) | MUX_CTL_CTS1)
-
-#define MUX_CSPI2_MOSI__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MOSI)
-#define MUX_CSPI2_MISO__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MISO)
-
-/*
- * Memory regions and CS
- */
-#define IPU_MEM_BASE 0x70000000
-#define CSD0_BASE 0x80000000
-#define CSD1_BASE 0x90000000
-#define CS0_BASE 0xA0000000
-#define CS1_BASE 0xA8000000
-#define CS2_BASE 0xB0000000
-#define CS3_BASE 0xB2000000
-#define CS4_BASE 0xB4000000
-#define CS4_PSRAM_BASE 0xB5000000
-#define CS5_BASE 0xB6000000
-#define PCMCIA_MEM_BASE 0xC0000000
-
-#endif /* __ASM_ARCH_MX31_REGS_H */
diff --git a/include/asm-arm/arch-mx31/mx31.h b/include/asm-arm/arch-mx31/mx31.h
deleted file mode 100644
index f89a401..0000000
--- a/include/asm-arm/arch-mx31/mx31.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MX31_H
-#define __ASM_ARCH_MX31_H
-
-u32 mx31_get_mpl_dpdgck_clk(void);
-u32 mx31_get_mcu_main_clk(void);
-u32 mx31_get_ipg_clk(void);
-void mx31_gpio_mux(unsigned long mode);
-
-#endif /* __ASM_ARCH_MX31_H */
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index 17d3b03..8ecd059 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -52,9 +52,6 @@
#define DV_EVM
#define CFG_NAND_SMALLPAGE
#define CFG_USE_NOR
-#define CFG_USE_INTEL_NOR /* Define this when your DVEVM has Intel
- * flash instead of AMD flash
- */
/*===================*/
/* SoC Configuration */
/*===================*/
@@ -63,24 +60,6 @@
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CFG_HZ 1000
-#define CFG_DAVINCI_PINMUX_0 0x00000c1f
-#define CFG_DAVINCI_WAITCFG 0x00000000
-#define CFG_DAVINCI_ACFG2 0x3ffffffd /* CE configs */
-#define CFG_DAVINCI_ACFG3 0x3ffffffd
-#define CFG_DAVINCI_ACFG4 0x3ffffffd
-#define CFG_DAVINCI_ACFG5 0x3ffffffd
-#undef CFG_DAVINCI_NANDCE /* When using NAND, define 2,3 or 4 */
-#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */
-#define CFG_DAVINCI_SDREF 0x000005c3
-#define CFG_DAVINCI_SDCFG 0x00178632 /* 8 banks */
-#define CFG_DAVINCI_SDTIM0 0x28923211
-#define CFG_DAVINCI_SDTIM1 0x0016c722
-#define CFG_DAVINCI_MMARG_BRF0 0x00444400
-/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
-#define CFG_DAVINCI_PLL1_PLLM 0x15
-#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */
-#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */
-#define CFG_DAVINCI_PLL2_DIV2 0x01
/*====================================================*/
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
@@ -135,7 +114,7 @@
#ifdef CFG_USE_NAND
#undef CFG_ENV_IS_IN_FLASH
#define CFG_NO_FLASH
-#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#ifdef CFG_NAND_SMALLPAGE
#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
#define CFG_ENV_SIZE SZ_16K
@@ -160,31 +139,24 @@
#undef CONFIG_SKIP_RELOCATE_UBOOT
#endif
#define CFG_ENV_IS_IN_FLASH
-#undef CFG_NO_FLASH
+#undef CFG_NO_FLASH
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
-#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)
-#define CFG_ENV_OFFSET (CFG_ENV_ADDR)
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
+#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
+#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3)
+#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
-#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
+#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
-#ifdef CFG_USE_INTEL_NOR
-#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size INTEL Flash */
-#define CFG_FLASH_PROTECTION 1
-#else
-#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
-#endif
#endif
/*==============================*/
/* U-Boot general configuration */
/*==============================*/
-#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
#define CONFIG_MISC_INIT_R
-#undef CONFIG_BOOTDELAY
+#undef CONFIG_BOOTDELAY
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index cb69535..96c9a30 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -35,24 +35,6 @@
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CFG_HZ 1000
-#define CFG_DAVINCI_PINMUX_0 0x00000c1f
-#define CFG_DAVINCI_WAITCFG 0x00000000
-#define CFG_DAVINCI_ACFG2 0x0432229c /* CE configs */
-#define CFG_DAVINCI_ACFG3 0x3ffffffd
-#define CFG_DAVINCI_ACFG4 0x3ffffffd
-#define CFG_DAVINCI_ACFG5 0x3ffffffd
-#define CFG_DAVINCI_NANDCE 2 /* When using NAND, define 2,3 or 4 */
-#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */
-#define CFG_DAVINCI_SDREF 0x000005c3
-#define CFG_DAVINCI_SDCFG 0x00178622 /* 4 banks */
-#define CFG_DAVINCI_SDTIM0 0x28923211
-#define CFG_DAVINCI_SDTIM1 0x0016c722
-#define CFG_DAVINCI_MMARG_BRF0 0x00444400
-/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
-#define CFG_DAVINCI_PLL1_PLLM 0x15
-#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */
-#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */
-#define CFG_DAVINCI_PLL2_DIV2 0x01
/*=============*/
/* Memory Info */
/*=============*/
@@ -64,6 +46,7 @@
#define CONFIG_STACKSIZE (256*1024) /* regular stack */
#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
+#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
/*====================*/
/* Serial Driver info */
/*====================*/
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index b2c0d7d..de8c4fa 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -60,24 +60,6 @@
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CFG_HZ 1000
-#define CFG_DAVINCI_PINMUX_0 0x00000c1f
-#define CFG_DAVINCI_WAITCFG 0x00000000
-#define CFG_DAVINCI_ACFG2 0x3ffffffd /* CE configs */
-#define CFG_DAVINCI_ACFG3 0x3ffffffd
-#define CFG_DAVINCI_ACFG4 0x3ffffffd
-#define CFG_DAVINCI_ACFG5 0x3ffffffd
-#undef CFG_DAVINCI_NANDCE /* When using NAND, define 2,3 or 4 */
-#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */
-#define CFG_DAVINCI_SDREF 0x000005c3
-#define CFG_DAVINCI_SDCFG 0x00178632 /* 8 banks */
-#define CFG_DAVINCI_SDTIM0 0x28923211
-#define CFG_DAVINCI_SDTIM1 0x0016c722
-#define CFG_DAVINCI_MMARG_BRF0 0x00444400
-/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
-#define CFG_DAVINCI_PLL1_PLLM 0x15
-#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */
-#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */
-#define CFG_DAVINCI_PLL2_DIV2 0x01
/*====================================================*/
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
deleted file mode 100644
index a6ed77a..0000000
--- a/include/configs/imx31_litekit.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Kshitij Gupta <kshitij@ti.com>
- *
- * Configuration settings for the 242x TI H4 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
- /* High Level Configuration Options */
-#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
-#define CONFIG_MX31 1 /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ 26000000
-#define CONFIG_MX31_CLK32 32000
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* Temporarily disabled */
-#if 0
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_FIT 1
-#define CONFIG_FIT_VERBOSE 1
-#endif
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024)
-#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_MX31_UART 1
-#define CFG_MX31_UART1 1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-#define CONFIG_BOOTDELAY 3
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.23.168
-#define CONFIG_SERVERIP 192.168.23.2
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \
- "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
- "ip=dhcp nfsroot=$(serverip):$(nfsrootfs), v3, tcp\0" \
- "bootcmd=run bootcmd_net\0" \
- "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
- "tftpboot 0x80000000 uImage-mx31; bootm\0" \
- "prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; " \
- "protect off all; erase 0xa00d0000 0xa01effff; " \
- "cp.b 0x80000000 0xa00d0000 $(filesize)\0"
-
-#define CONFIG_DRIVER_SMC911X 1
-#define CONFIG_DRIVER_SMC911X_BASE 0xb4020000
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "uboot> "
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START 0 /* memtest works on */
-#define CFG_MEMTEST_END 0x10000
-
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
-#define CFG_LOAD_ADDR 0 /* default load address */
-
-#define CFG_HZ 32000
-
-#define CONFIG_CMDLINE_EDITING 1
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x80000000
-#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CFG_FLASH_BASE 0xa0000000
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-/* Monitor at beginning of flash */
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
-
-#define CFG_ENV_ADDR 0xa01f0000
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_SECT_SIZE (64 * 1024)
-#define CFG_ENV_SIZE (64 * 1024)
-
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
-#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
-
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */
-
-/*
- * JFFS2 partitions
- */
-#undef CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_DEV "nor0"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
deleted file mode 100644
index 647b05b..0000000
--- a/include/configs/imx31_phycore.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Kshitij Gupta <kshitij@ti.com>
- *
- * Configuration settings for the 242x TI H4 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
- /* High Level Configuration Options */
-#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
-#define CONFIG_MX31 1 /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ 26000000
-#define CONFIG_MX31_CLK32 32000
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* Temporarily disabled */
-#if 0
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_FIT 1
-#define CONFIG_FIT_VERBOSE 1
-#endif
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024)
-#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_HARD_I2C 1
-#define CONFIG_I2C_MXC 1
-#define CFG_I2C_MX31_PORT2 1
-#define CFG_I2C_SPEED 100000
-#define CFG_I2C_SLAVE 0xfe
-
-#define CONFIG_MX31_UART 1
-#define CFG_MX31_UART1 1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-
-#define CONFIG_BOOTDELAY 3
-
-#define MTDPARTS_DEFAULT \
- "mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)"
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.23.168
-#define CONFIG_SERVERIP 192.168.23.2
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \
- "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
- "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
- "bootargs_flash=setenv bootargs $(bootargs) " \
- "root=/dev/mtdblock2 rootfstype=jffs2\0" \
- "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0" \
- "bootcmd=run bootcmd_net\0" \
- "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
- "tftpboot 0x80000000 $(uimage); bootm\0" \
- "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash; " \
- "bootm 0x80000000\0" \
- "unlock=yes\0" \
- "mtdparts=" MTDPARTS_DEFAULT "\0" \
- "prg_uboot=tftpboot 0x80000000 $(uboot); " \
- "protect off 0xa0000000 +0x20000; " \
- "erase 0xa0000000 +0x20000; " \
- "cp.b 0x80000000 0xa0000000 $(filesize)\0" \
- "prg_kernel=tftpboot 0x80000000 $(uimage); " \
- "erase 0xa0040000 +0x180000; " \
- "cp.b 0x80000000 0xa0040000 $(filesize)\0" \
- "prg_jffs2=tftpboot 0x80000000 $(jffs2); " \
- "erase 0xa01c0000 0xa1ffffff; " \
- "cp.b 0x80000000 0xa01c0000 $(filesize)\0"
-
-#define CONFIG_DRIVER_SMC911X 1
-#define CONFIG_DRIVER_SMC911X_BASE 0xa8000000
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "uboot> "
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START 0 /* memtest works on */
-#define CFG_MEMTEST_END 0x10000
-
-#define CFG_LOAD_ADDR 0 /* default load address */
-
-#define CFG_HZ 32000
-
-#define CONFIG_CMDLINE_EDITING 1
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below */
-#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x80000000
-#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CFG_FLASH_BASE 0xa0000000
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 259 /* max number of sectors on one chip */
-#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
-
-#define CFG_ENV_IS_IN_EEPROM 1
-#define CFG_ENV_OFFSET 0x00 /* environment starts here */
-#define CFG_ENV_SIZE 4096
-#define CFG_I2C_EEPROM_ADDR 0x52
-#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */
-#define CFG_I2C_EEPROM_ADDR_LEN 2 /* length of byte address */
-
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
-#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
-
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */
-
-/*
- * JFFS2 partitions
- */
-#undef CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_DEV "nor0"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
deleted file mode 100644
index be7f3c6..0000000
--- a/include/configs/mx31ads.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
- *
- * Configuration settings for the MX31ADS Freescale board.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/mx31-regs.h>
-
- /* High Level Configuration Options */
-#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
-#define CONFIG_MX31 1 /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */
-#define CONFIG_MX31_CLK32 32000
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/*
- * Disabled for now due to build problems under Debian and
- * a significant increase in the final file size: 144260 vs. 109536 Bytes
- */
-#if 0
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_FIT 1
-#define CONFIG_FIT_VERBOSE 1
-#endif
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024)
-#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_MX31_UART 1
-#define CFG_MX31_UART1 1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-#define CONFIG_BOOTDELAY 3
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.23.168
-#define CONFIG_SERVERIP 192.168.23.2
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \
- "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
- "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
- "bootcmd=run bootcmd_net\0" \
- "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
- "tftpboot 0x80000000 uImage-mx31; bootm\0" \
- "prg_uboot=tftpboot 0x80000000 u-boot-mx31ads.bin; " \
- "protect off 0xa0000000 0xa001ffff; " \
- "erase 0xa0000000 0xa001ffff; " \
- "cp.b 0x80000000 0xa0000000 $(filesize)\0"
-
-#define CONFIG_DRIVER_CS8900 1
-#define CS8900_BASE 0xb4020300
-#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> "
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START 0 /* memtest works on */
-#define CFG_MEMTEST_END 0x10000
-
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
-#define CFG_LOAD_ADDR CSD0_BASE /* default load address */
-
-#define CFG_HZ 32000
-
-#define CONFIG_CMDLINE_EDITING 1
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below */
-#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 CSD0_BASE
-#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CFG_FLASH_BASE CS0_BASE
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 262 /* max number of sectors on one chip */
-#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
-#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128KiB */
-
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_SECT_SIZE (32 * 1024)
-#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
-/* S29WS256N NOR flash has 4 32KiB small sectors at beginning and end.
- * The rest of 32MiB is in 128KiB big sectors.
- * U-Boot occupies the low 4 sectors,
- * if we put environment next to it, we will have to occupy 128KiB for it.
- * Putting it at the top of flash we use only 32KiB. */
-#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 32 * 1024 * 1024 - CFG_ENV_SIZE)
-
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
-#if 0 /* Doesn't work yet, work in progress */
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes(~10x faster)*/
-#endif
-#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
-
-/*
- * JFFS2 partitions
- */
-#undef CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_DEV "nor0"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/pmdra.h b/include/configs/pmdra.h
deleted file mode 100644
index e170ee9..0000000
--- a/include/configs/pmdra.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * Copyright (C) 2008 Prodrive BV <pieter.voorthijsen@prodrive.nl>
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-#include <asm/sizes.h>
-
-/*=======*/
-/* Board */
-/*=======*/
-#define CFG_PMDRA
-#define CFG_NAND_LARGEPAGE
-/*===================*/
-/* SoC Configuration */
-/*===================*/
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
-#define CONFIG_SYS_CLK_FREQ ((CFG_HZ_CLOCK * (CFG_DAVINCI_PLL1_PLLM + 1))/2)
-#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
-#define CFG_HZ 1000
-#define CFG_DAVINCI_PINMUX_0 0x00000c1f
-#define CFG_DAVINCI_WAITCFG 0x10000000
-#define CFG_DAVINCI_ACFG2 0x00460385 /* NOR CE Config */
-#define CFG_DAVINCI_ACFG3 0x0822218c /* NAND CE Config */
-#define CFG_DAVINCI_ACFG4 0x3ffffffd
-#define CFG_DAVINCI_ACFG5 0x3ffffffd
-#define CFG_DAVINCI_NANDCE 3 /* Use CE3 for NAND */
-#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */
-#define CFG_DAVINCI_SDREF 0x000005c3
-#define CFG_DAVINCI_SDCFG 0x00178832 /* 8 banks , CAS = 4*/
-#define CFG_DAVINCI_SDTIM0 0x28923211
-#define CFG_DAVINCI_SDTIM1 0x0016c722
-#define CFG_DAVINCI_MMARG_BRF0 0x00444400
-/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
-#define CFG_DAVINCI_PLL1_PLLM 0x12
-#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */
-#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */
-#define CFG_DAVINCI_PLL2_DIV2 0x01
-/*====================================================*/
-/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
-/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
-/*====================================================*/
-#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_I2C_EEPROM_ADDR 0x50
-#define CFG_EEPROM_PAGE_WRITE_BITS 6
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
-/*=============*/
-/* Memory Info */
-/*=============*/
-#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */
-#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
-#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
-#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define CONFIG_STACKSIZE (256*1024) /* regular stack */
-#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
-#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */
-#define DDR_8BANKS /* 8-bank DDR2 (256MB) */
-/*====================*/
-/* Serial Driver info */
-/*====================*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
-#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */
-#define CFG_NS16550_COM2 0x01c20800 /* Base address of UART2 */
-#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */
-#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-/*===================*/
-/* I2C Configuration */
-/*===================*/
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_DAVINCI_I2C
-#define CFG_I2C_SPEED 50000 /* 100Kbps won't work, silicon bug */
-#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
-/*==================================*/
-/* Network & Ethernet Configuration */
-/*==================================*/
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-/*=====================*/
-/* Flash & Environment */
-/*=====================*/
-#define CFG_USE_NAND
-#define CFG_NAND_BASE 0x04000000
-#undef CFG_NAND_HW_ECC
-#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define NAND_MAX_CHIPS 1
-#define DEF_BOOTM ""
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
-#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)
-#define CFG_ENV_OFFSET (CFG_ENV_ADDR)
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster)*/
-#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
-#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
-#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
-#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
-#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
-#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size INTEL Flash */
-#define CFG_FLASH_PROTECTION 1
-/*==============================*/
-/* U-Boot general configuration */
-/*==============================*/
-#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
-#define CONFIG_CMDLINE_EDITING
-#define CFG_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-#define CONFIG_ENV_OVERWRITE
-/*===================*/
-/* Linux Information */
-/*===================*/
-#define LINUX_BOOT_PARAM_ADDR 0x80000100
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS \
- "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
-#define CONFIG_BOOTCOMMAND "run nand"
-#define CONFIG_EXTRA_ENV_SETTINGS "ethaddr=00:11:22:33:44:55\n"
-/*=================*/
-/* U-Boot commands */
-/*=================*/
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-#define CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-#define CONFIG_CMD_NAND
-/*=======================*/
-/* KGDB support (if any) */
-/*=======================*/
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-#endif /* __CONFIG_H */