nand_spl: remove simpc8313 support

Commit 3d5a335c announced that all the nand_spl boards
would be removed before v2014.07 release.

Also update README.scrapyard.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

1 files changed, 0 insertions, 580 deletions

diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
deleted file mode 100644
index 46157cc..0000000
--- a/include/configs/SIMPC8313.h
+++ /dev/null
@@ -1,580 +0,0 @@
-/*
- * Copyright (C) Sheldon Instruments, Inc. 2008
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-/*
- * simpc8313 board configuration file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_NAND_U_BOOT
-
-#define CONFIG_E300			1
-#define CONFIG_MPC831x			1
-#define CONFIG_MPC8313			1
-
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	(512 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST	0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_START	0x00100100
-#define CONFIG_SYS_NAND_U_BOOT_RELOC	0x00010000
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
-
-#define CONFIG_SYS_TEXT_BASE	0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#else
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif
-
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_FSL_ELBC			1
-
-#define CONFIG_MISC_INIT_R
-
-/*
- * On-board devices
- *
- * TSEC1 is Marvell PHY 88E1118
- */
-
-#define CONFIG_SYS_33MHZ
-
-#define CONFIG_83XX_CLKIN		33333333	/* in Hz */
-
-#define CONFIG_SYS_CLK_FREQ		CONFIG_83XX_CLKIN
-
-#define CONFIG_SYS_IMMR			0xE0000000
-
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_DEFAULT_IMMR		CONFIG_SYS_IMMR
-#endif
-
-#define CONFIG_SYS_MEMTEST_START	0x00001000
-#define CONFIG_SYS_MEMTEST_END		0x07f00000
-
-#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
-#define CONFIG_SYS_ACR_RPTCNT	3	/* Arbiter repeat count (0-7) */
-
-/*
- * Device configurations
- */
-#define CONFIG_TSEC1
-
-/*
- * DDR Setup
- */
-					/* DDR is system memory*/
-#define CONFIG_SYS_DDR_BASE		0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
-
-#define CONFIG_VERY_BIG_RAM
-#define CONFIG_MAX_MEM_MAPPED		(512 << 20)
-
-#define CONFIG_SYS_DDRCDR		(DDRCDR_EN \
-					| DDRCDR_PZ_NOMZ \
-					| DDRCDR_NZ_NOMZ \
-					| DDRCDR_M_ODR)
-					/* 0x73000002 TODO ODR & DRN ? */
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_NO_FLASH
-
-#if !defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* Size of used area in RAM*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	\
-			(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN	(512 * 1024)	/* Reserved for malloc */
-
-/*
- * Local Bus LCRR and LBCR regs
- */
-#define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
-#define CONFIG_SYS_LCRR_EADC	LCRR_EADC_1
-#define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_2
-#define CONFIG_SYS_LBC_LBCR	(0x00040000 /* TODO */ \
-				| (0xFF << LBCR_BMT_SHIFT) \
-				| 0xF)	/* 0x0004ff0f */
-
-				/* LB refresh timer prescal, 266MHz/32 */
-#define CONFIG_SYS_LBC_MRTPR	0x20000000
-
-/* drivers/mtd/nand/nand.c */
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_NAND_BASE		0xFFF00000
-#else
-#define CONFIG_SYS_NAND_BASE		0xE2800000
-#endif
-#define CONFIG_SYS_FPGA_BASE		0xFF000000
-
-#define CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_NAND_FSL_ELBC		1
-
-#define CONFIG_SYS_NAND_BR_PRELIM	(CONFIG_SYS_NAND_BASE \
-				| BR_DECC_CHK_GEN	/* Use HW ECC */ \
-				| BR_PS_8		/* 8 bit Port */ \
-				| BR_MS_FCM		/* MSEL = FCM */ \
-				| BR_V)			/* valid */
-
-#ifdef CONFIG_NAND_SP
-#define CONFIG_SYS_NAND_OR_PRELIM	(OR_AM_32KB \
-					| OR_FCM_CSCT \
-					| OR_FCM_CST \
-					| OR_FCM_CHT \
-					| OR_FCM_SCY_1 \
-					| OR_FCM_TRLX \
-					| OR_FCM_EHTR)
-#define CONFIG_SYS_LBLAWAR0_PRELIM	(LBLAWAR_EN | LBLAWAR_32KB)
-#define CONFIG_SYS_NAND_PAGE_SIZE	512	/* NAND chip page size */
-					/* NAND chip block size */
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(16 << 10)
-#define NAND_CACHE_PAGES		32
-#elif defined(CONFIG_NAND_LP)
-#define CONFIG_SYS_NAND_OR_PRELIM	(OR_AM_256KB \
-					| OR_FCM_PGS \
-					| OR_FCM_CSCT \
-					| OR_FCM_CST \
-					| OR_FCM_CHT \
-					| OR_FCM_SCY_1 \
-					| OR_FCM_TRLX \
-					| OR_FCM_EHTR)
-#define CONFIG_SYS_LBLAWAR0_PRELIM	(LBLAWAR_EN | LBLAWAR_256KB)
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048	/* NAND chip page size */
-					/* NAND chip block size */
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)
-#define NAND_CACHE_PAGES		64
-#else
-#error Page size of NAND not defined.
-#endif /* CONFIG_NAND_SP */
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SYS_NAND_BLOCK_SIZE
-
-#define CONFIG_SYS_BR0_PRELIM		CONFIG_SYS_NAND_BR_PRELIM
-#define CONFIG_SYS_OR0_PRELIM		CONFIG_SYS_NAND_OR_PRELIM
-
-#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_NAND_BASE
-
-#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM	CONFIG_SYS_LBLAWBAR0_PRELIM
-#define CONFIG_SYS_NAND_LBLAWAR_PRELIM	CONFIG_SYS_LBLAWAR0_PRELIM
-
-#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_FPGA_BASE \
-					| BR_PS_16 \
-					| BR_MS_UPMA \
-					| BR_V)
-#define CONFIG_SYS_OR1_PRELIM		(OR_AM_2MB \
-					| OR_UPM_BCTLD)
-
-#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_FPGA_BASE
-#define CONFIG_SYS_LBLAWAR1_PRELIM	(LBLAWAR_EN | LBLAWAR_2MB)
-
-/*
- * JFFS2 configuration
- */
-#define CONFIG_JFFS2_NAND
-#define CONFIG_JFFS2_DEV	"nand0"
-
-/* mtdparts command line support */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
-#define MTDIDS_DEFAULT		"nand0=nand0"
-#define MTDPARTS_DEFAULT	"mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)"
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
-/*
- * Serial Port
- */
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_NS16550_MIN_FUNCTIONS
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-		{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1		(CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2		(CONFIG_SYS_IMMR+0x4600)
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
-#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS		0xE2000000
-#define CONFIG_SYS_PCI1_IO_SIZE		0x00100000	/* 1M */
-
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID	0x1057	/* Motorola */
-
-/*
- * TSEC
- */
-#define CONFIG_TSEC_ENET		/* TSEC ethernet support */
-
-#define CONFIG_GMII			/* MII PHY management */
-
-#ifdef CONFIG_TSEC1
-#define CONFIG_HAS_ETH0
-#define CONFIG_TSEC1_NAME		"TSEC0"
-#define CONFIG_SYS_TSEC1_OFFSET		0x24000
-#define TSEC1_PHY_ADDR			0x0
-#define TSEC1_FLAGS			TSEC_GIGABIT
-#define TSEC1_PHYIDX			0
-#endif
-
-#ifdef CONFIG_TSEC2
-#define CONFIG_HAS_ETH1
-#define CONFIG_TSEC2_NAME		"TSEC1"
-#define CONFIG_SYS_TSEC2_OFFSET		0x25000
-#define TSEC2_PHY_ADDR			4
-#define TSEC2_FLAGS			TSEC_GIGABIT
-#define TSEC2_PHYIDX			0
-#endif
-
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME			"TSEC1"
-
-/*
- * Configure on-board RTC
- */
-#define CONFIG_RTC_DS1337
-#define CONFIG_SYS_I2C_RTC_ADDR		0x68
-
-/*
- * Environment
- */
-#if defined(CONFIG_NAND_U_BOOT)
-	#define CONFIG_ENV_IS_IN_NAND	1
-	#define CONFIG_ENV_OFFSET	(768 * 1024)
-	#define CONFIG_ENV_SECT_SIZE	CONFIG_SYS_NAND_BLOCK_SIZE
-	#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-	#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-	#define CONFIG_ENV_RANGE	(CONFIG_ENV_SECT_SIZE * 4)
-	#define CONFIG_ENV_OFFSET_REDUND	\
-					(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
-#elif !defined(CONFIG_SYS_RAMBOOT)
-	#define CONFIG_ENV_IS_IN_FLASH	1
-	#define CONFIG_ENV_ADDR		\
-			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-	#define CONFIG_ENV_SECT_SIZE	0x10000	/* 64K(one sector) for env */
-	#define CONFIG_ENV_SIZE		0x2000
-
-/* Address and size of Redundant Environment Sector */
-#else
-	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-	#define CONFIG_ENV_SIZE		0x2000
-#endif
-
-#define CONFIG_LOADS_ECHO		1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1 /* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_FLASH
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_JFFS2
-
-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
-	#undef CONFIG_CMD_SAVEENV
-	#undef CONFIG_CMD_LOADS
-#endif
-
-#define CONFIG_CMDLINE_EDITING	1
-#define CONFIG_AUTO_COMPLETE	/* add autocompletion support   */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
-
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE		\
-				+ sizeof(CONFIG_SYS_PROMPT)	\
-				+ 16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-				/* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)
-
-#define CONFIG_SYS_RCWH_PCIHOST	0x80000000	/* PCIHOST */
-
-#define CONFIG_SYS_HRCW_LOW	(HRCWL_LCL_BUS_TO_SCB_CLK_1X1	\
-				| 0x20000000 /* reserved */	\
-				| HRCWL_DDR_TO_SCB_CLK_2X1	\
-				| HRCWL_CSB_TO_CLKIN_4X1	\
-				| HRCWL_CORE_TO_CSB_2_5X1)
-
-#define CONFIG_SYS_NS16550_CLK	(CONFIG_83XX_CLKIN * 4)
-
-#define CONFIG_SYS_HRCW_HIGH_BASE	(HRCWH_PCI_HOST	\
-				| HRCWH_PCI1_ARBITER_ENABLE	\
-				| HRCWH_CORE_ENABLE		\
-				| HRCWH_BOOTSEQ_DISABLE		\
-				| HRCWH_SW_WATCHDOG_DISABLE	\
-				| HRCWH_TSEC1M_IN_RGMII		\
-				| HRCWH_TSEC2M_IN_RGMII		\
-				| HRCWH_BIG_ENDIAN		\
-				| HRCWH_LALE_NORMAL)
-
-#ifdef CONFIG_NAND_LP
-#define CONFIG_SYS_HRCW_HIGH	(CONFIG_SYS_HRCW_HIGH_BASE	\
-				| HRCWH_FROM_0XFFF00100		\
-				| HRCWH_ROM_LOC_NAND_LP_8BIT	\
-				| HRCWH_RL_EXT_NAND)
-#else
-#define CONFIG_SYS_HRCW_HIGH	(CONFIG_SYS_HRCW_HIGH_BASE	\
-				| HRCWH_FROM_0XFFF00100		\
-				| HRCWH_ROM_LOC_NAND_SP_8BIT	\
-				| HRCWH_RL_EXT_NAND)
-#endif
-
-/* System IO Config */
-#define CONFIG_SYS_SICRH	(SICRH_ETSEC2_B	\
-				| SICRH_ETSEC2_C	\
-				| SICRH_ETSEC2_D	\
-				| SICRH_ETSEC2_E	\
-				| SICRH_ETSEC2_F	\
-				| SICRH_ETSEC2_G	\
-				| SICRH_TSOBI1		\
-				| SICRH_TSOBI2)
-#define CONFIG_SYS_SICRL	(SICRL_LBC		\
-				| SICRL_USBDR_10	\
-				| SICRL_ETSEC2_A)
-
-#define CONFIG_SYS_HID0_INIT	0x000000000
-#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK \
-				| HID0_ENABLE_INSTRUCTION_CACHE \
-				| HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
-
-#define CONFIG_SYS_HID2		HID2_HBE
-
-#define CONFIG_HIGH_BATS	1	/* High BATs supported */
-
-/* DDR @ 0x00000000 */
-#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_RW)
-#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_IBAT1L	((CONFIG_SYS_SDRAM_BASE + 0x10000000) \
-				| BATL_PP_RW)
-#define CONFIG_SYS_IBAT1U	((CONFIG_SYS_SDRAM_BASE + 0x10000000) \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-
-/* PCI @ 0x80000000 */
-#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW)
-#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_PCI1_MEM_BASE \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_PCI1_MMIO_BASE \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_PCI1_MMIO_BASE \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-
-/* PCI2 not supported on 8313 */
-#define CONFIG_SYS_IBAT4L	(0)
-#define CONFIG_SYS_IBAT4U	(0)
-
-/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
-#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_IMMR \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_IMMR \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-
-/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
-#define CONFIG_SYS_IBAT6L	(0xF0000000 \
-				| BATL_PP_RW \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT6U	(0xF0000000 \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-
-#define CONFIG_SYS_IBAT7L	(0)
-#define CONFIG_SYS_IBAT7U	(0)
-
-#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
-#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
-#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
-#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
-#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
-#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
-#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
-#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
-#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
-
-/*
- * Environment Configuration
- */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_NETDEV		"eth1"
-
-#define CONFIG_HOSTNAME		simpc8313
-#define CONFIG_ROOTPATH		"/tftpboot/"
-#define CONFIG_BOOTFILE		"/tftpboot/uImage"
-				/* U-Boot image on TFTP server */
-#define CONFIG_UBOOTPATH	"u-boot-nand.bin"
-#define CONFIG_FDTFILE		"simpc8313.dtb"
-
-				/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		500000
-#define CONFIG_BOOTDELAY	5	/* 5 second delay */
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_BOOTCOMMAND	"nand read $loadaddr kernel 600000;" \
-					"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"netdev=" CONFIG_NETDEV "\0"					\
-	"ethprime=TSEC1\0"						\
-	"uboot=" CONFIG_UBOOTPATH "\0"					\
-	"tftpflash=tftpboot $loadaddr $uboot; "				\
-		"protect off " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" +$filesize; "	\
-		"erase " __stringify(CONFIG_SYS_TEXT_BASE)		\
-			" +$filesize; "	\
-		"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" $filesize; "	\
-		"protect on " __stringify(CONFIG_SYS_TEXT_BASE)		\
-			" +$filesize; "	\
-		"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" $filesize\0"	\
-	"fdtaddr=ae0000\0"						\
-	"fdtfile=" CONFIG_FDTFILE "\0"					\
-	"console=ttyS0\0"						\
-	"setbootargs=setenv bootargs "					\
-		"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
-	"setipargs=setenv bootargs nfsroot=$serverip:$rootpath "	\
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"	\
-							"$netdev:off "	\
-		"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
-	"load_uboot=tftp 100000 u-boot-nand.bin\0"			\
-	"burn_uboot=nand erase u-boot 80000; "				\
-		"nand write 100000 u-boot $filesize\0"			\
-	"update_uboot=run load_uboot;run burn_uboot\0"			\
-	"mtdids=nand0=nand0\0"						\
-	"mtdparts=mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)\0"	\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
-	"bootargs=root=/dev/mtdblock2 rootfstype=jffs2 rw "		\
-		"console=ttyS0,115200\0"				\
-	""
-
-#define CONFIG_NFSBOOTCOMMAND						\
-	"setenv rootdev /dev/nfs;"					\
-	"run setbootargs;"						\
-	"run setipargs;"						\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND						\
-	"setenv rootdev /dev/ram;"					\
-	"run setbootargs;"						\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#endif	/* __CONFIG_H */