summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-07-17 23:16:40 +0000
committerwdenk <wdenk>2003-07-17 23:16:40 +0000
commit2535d60277cc295adf75cd5721dcecd840c69a63 (patch)
treea4a7c42580ded1e631658cec4f7a26d8e677a342 /include
parent945af8d723a29e9b6289d84250745ed0dc16fc81 (diff)
downloadu-boot-imx-2535d60277cc295adf75cd5721dcecd840c69a63.zip
u-boot-imx-2535d60277cc295adf75cd5721dcecd840c69a63.tar.gz
u-boot-imx-2535d60277cc295adf75cd5721dcecd840c69a63.tar.bz2
* Patch by Martin Krause, 17 Jul 2003:
add delay to get I2C working with "imm" command and s3c24x0_i2c.c * Patch by Richard Woodruff, 17 July 03: - Fixed bug in OMAP1510 baud rate divisor settings. * Patch by Nye Liu, 16 July 2003: MPC860FADS fixes: - add MPC86xADS support (uses MPC86xADS.h) - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T) o PLPRCR changes o BRG changes (EXTAL/XTAL restricted to 10MHz) o don't trust gclk() software measurement by default, depend on CONFIG_8xx_GCLK_FREQ - add DRAM SIMM not installed detection - use more "correct" SDRAM initialization sequence - allow different SDRAM sizes (8xxADS has 8M) - default DER is 0 - remove unused MAMR defines from FADS860T.h (all done in fads.c) - rename MAMR/MBMR defines to be more consistent. Should eventually be merged into MxMR to better reflect the PowerQUICC datasheet. * Patch by Yuli Barcohen, 16 Jul 2003: support new Motorola PQ2FADS-ZU evaluation board which replaced MPC8260ADS and MPC8266ADS
Diffstat (limited to 'include')
-rw-r--r--include/common.h14
-rw-r--r--include/commproc.h6
-rw-r--r--include/configs/ADS860.h11
-rw-r--r--include/configs/FADS823.h1
-rw-r--r--include/configs/FADS850SAR.h1
-rw-r--r--include/configs/FADS860T.h89
-rw-r--r--include/configs/IAD210.h2
-rw-r--r--include/configs/IVML24.h20
-rw-r--r--include/configs/IVMS8.h20
-rw-r--r--include/configs/MPC8260ADS.h77
-rw-r--r--include/configs/MPC86xADS.h438
-rw-r--r--include/configs/RPXClassic.h3
-rw-r--r--include/configs/SPD823TS.h8
-rw-r--r--include/configs/pcu_e.h10
-rw-r--r--include/configs/v37.h3
-rw-r--r--include/mpc8xx.h287
-rw-r--r--include/pcmcia.h2
-rw-r--r--include/version.h2
18 files changed, 750 insertions, 244 deletions
diff --git a/include/common.h b/include/common.h
index c8ad856..03db8d7 100644
--- a/include/common.h
+++ b/include/common.h
@@ -43,6 +43,20 @@ typedef volatile unsigned char vu_char;
#endif
#ifdef CONFIG_8xx
#include <asm/8xx_immap.h>
+#ifdef CONFIG_MPC860
+#define CONFIG_MPC86x 1
+#endif
+#ifdef CONFIG_MPC860T
+#define CONFIG_MPC86x 1
+#endif
+#if defined(CONFIG_MPC866P) || \
+ defined(CONFIG_MPC866T) || \
+ defined(CONFIG_MPC859T) || \
+ defined(CONFIG_MPC859DSL) || \
+ defined(CONFIG_MPC852T)
+#define CONFIG_MPC866_et_al 1
+#define CONFIG_MPC86x 1
+#endif
#elif defined(CONFIG_5xx)
#include <asm/5xx_immap.h>
#elif defined(CONFIG_8260)
diff --git a/include/commproc.h b/include/commproc.h
index 652d2ab..6845248 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -707,10 +707,10 @@ typedef struct scc_enet {
/*** FADS860T********************************************************/
-#if defined(CONFIG_MPC860T) && defined(CONFIG_FADS)
-/* This ENET stuff is for the MPC860TFADS with ethernet on SCC1.
+#if (defined(CONFIG_MPC860T) || defined(CONFIG_MPC866_et_al)) \
+ && defined(CONFIG_FADS)
+/* This ENET stuff is for the MPC860TFADS/MPC8xxADS with ethernet on SCC1.
*/
-
#ifdef CONFIG_SCC1_ENET
#define SCC_ENET 0
#endif /* CONFIG_SCC1_ETHERNET */
diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h
index 1b73692..0045303 100644
--- a/include/configs/ADS860.h
+++ b/include/configs/ADS860.h
@@ -19,6 +19,7 @@
#include <mpc8xx_irq.h>
#define CONFIG_MPC860 1
+#define CONFIG_MPC860T 1
#define CONFIG_ADS 1
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
@@ -31,10 +32,12 @@
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address defaults */
#define CFG_I2C_SLAVE 0x7F
-#define MPC8XX_XIN 32768 /* 32.768 kHz input frequency */
-#define MPC8XX_FACT 0x5F6 /* Multiply by 1526 */
+#define CFG_8XX_XIN 32768 /* 32.768 kHz input frequency */
+#define CFG_8XX_FACT 0x5F6 /* Multiply by 1526 */
/* MPC8XX_FACT * MPC8XX_XIN = 50 MHz */
+#define CONFIG_8xx_GCLK_FREQ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
+
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
#if 0
@@ -136,7 +139,7 @@
* FLASH organization
*/
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
+#define CFG_MAX_FLASH_SECT 16 /* max number of sectors on one chip */
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
@@ -198,7 +201,7 @@
*-----------------------------------------------------------------------
* set the PLL, the low-power modes and the reset control (15-29)
*/
-#define CFG_PLPRCR (((MPC8XX_FACT-1) << 20) | \
+#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
/*-----------------------------------------------------------------------
diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h
index acb2eed..3b201a7 100644
--- a/include/configs/FADS823.h
+++ b/include/configs/FADS823.h
@@ -23,6 +23,7 @@
#define CFG_PCMCIA_MEM_ADDR 0xe0000000
#define CFG_PCMCIA_MEM_SIZE 0x10000
#define CFG_IMMR 0xFF000000
+#define CFG_SDRAM_SIZE (4<<20) /* standard FADS has 4M */
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0x02800000
#define BCSR_ADDR ((uint) 0xff010000)
diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h
index a104176..3d04ef0 100644
--- a/include/configs/FADS850SAR.h
+++ b/include/configs/FADS850SAR.h
@@ -116,6 +116,7 @@
* Also NOTE that it doesn't mean SDRAM - it means MEMORY.
*/
#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_SIZE (4<<20) /* standard FADS has 4M */
#define CFG_FLASH_BASE 0x02800000
#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
#if 0
diff --git a/include/configs/FADS860T.h b/include/configs/FADS860T.h
index 2c94389..fd56010 100644
--- a/include/configs/FADS860T.h
+++ b/include/configs/FADS860T.h
@@ -32,25 +32,33 @@
*/
#include <mpc8xx_irq.h>
-#define CONFIG_MPC860 1
-#define CONFIG_MPC860T 1
-#define CONFIG_FADS 1
+/* board type */
+#define CONFIG_FADS 1 /* old/new FADS + new ADS */
+
+/* processor type */
+#define CONFIG_MPC860T 1 /* 860T */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#undef CONFIG_8xx_CONS_SMC2
#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_BAUDRATE 38400
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#if 0
-#define MPC8XX_FACT 10 /* Multiply by 10 */
-#define MPC8XX_XIN 5000000 /* 5 MHz in */
-#else
-#define MPC8XX_FACT 12 /* Multiply by 12 */
-#define MPC8XX_XIN 4000000 /* 4 MHz in */
-#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
+#if 0 /* old FADS */
+# define CFG_8XX_FACT 12 /* Multiply by 12 */
+# define CFG_8XX_XIN 4000000 /* 4 MHz in */
+#else /* new FADS */
+# define CFG_8XX_FACT 10 /* Multiply by 10 */
+# define CFG_8XX_XIN 5000000 /* 5 MHz in */
#endif
+#define MPC8XX_HZ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
+
+/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
+/* in general, we always know this for FADS+new ADS anyway */
+#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
+
+/* most vanilla kernels do not like this, set to 0 if in doubt */
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
#if 1
@@ -59,8 +67,12 @@
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
-#define CONFIG_BOOTCOMMAND "bootm 2800100" /* autoboot command */
-#define CONFIG_BOOTARGS ""
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+ "bootm"
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -77,10 +89,10 @@
/* choose SCC1 ethernet (10BASET on motherboard)
* or FEC ethernet (10/100 on daughterboard)
*/
-#if 1
+#if 0
#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
#undef CONFIG_FEC_ENET /* disable FEC ethernet */
-#else
+#else /* all 86x cores have FECs, if in doubt, use it */
#undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
#define CFG_DISCOVER_PHY
@@ -107,7 +119,11 @@
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
+#if (CFG_SDRAM_SIZE)
+#define CFG_MEMTEST_END CFG_SDRAM_SIZE /* 1 ... SDRAM_SIZE */
+#else
#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
+#endif
#define CFG_LOAD_ADDR 0x00100000
@@ -120,7 +136,7 @@
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*/
-/*-----------------------------------------------------------------------
+/*----------------------------------------------------------------------
* Internal Memory Mapped Register
*/
#define CFG_IMMR 0xFF000000
@@ -141,6 +157,11 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
+#ifdef CONFIG_FADS
+# define CFG_SDRAM_SIZE 0x00400000 /* 4 meg */
+#else /* !CONFIG_FADS */ /* old ADS */
+# define CFG_SDRAM_SIZE 0x00000000 /* NO SDRAM */
+#endif
#define CFG_FLASH_BASE 0x02800000
@@ -218,7 +239,7 @@
*-----------------------------------------------------------------------
* set the PLL, the low-power modes and the reset control (15-29)
*/
-#define CFG_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
+#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
/*-----------------------------------------------------------------------
@@ -235,7 +256,7 @@
*-----------------------------------------------------------------------
*
*/
-#define CFG_DER 0
+#define CFG_DER 0
/* Because of the way the 860 starts up and assigns CS0 the
* entire address space, we have to set the memory controller
@@ -280,36 +301,6 @@
#define CFG_OR1_PRELIM 0xffff8110 /* 64Kbyte address space */
#define CFG_BR1_PRELIM ((BCSR_ADDR) | BR_V )
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-/* 9 column SDRAM */
-#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#define CFG_MAMR 0x13a01114
/*
* Internal Definitions
*
@@ -425,7 +416,7 @@
#endif /* CONFIG_MPC850 */
#define CONFIG_DRAM_50MHZ 1
-#define CONFIG_SDRAM_50MHZ
+#define CONFIG_SDRAM_50MHZ 1
#ifdef CONFIG_MPC860T
diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h
index 7b76226..6dedbd7 100644
--- a/include/configs/IAD210.h
+++ b/include/configs/IAD210.h
@@ -354,7 +354,7 @@
*/
#define CFG_MAMR ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLB_A11 | \
+ MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_8X)
diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h
index 77746e8..a0cb1dd 100644
--- a/include/configs/IVML24.h
+++ b/include/configs/IVML24.h
@@ -424,7 +424,7 @@
*/
/* periodic timer for refresh */
-#define CFG_MAMR_PTB 204
+#define CFG_MBMR_PTB 204
/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
@@ -448,19 +448,19 @@
#if defined (CONFIG_IVML24_16M)
/* 8 column SDRAM */
-# define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
- MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 | \
- MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+ MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#elif defined (CONFIG_IVML24_32M)
/* 128 MBit SDRAM */
-# define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
- MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 | \
- MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+ MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#elif defined (CONFIG_IVML24_64M)
/* 128 MBit SDRAM */
-# define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
- MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 | \
- MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+ MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#endif
/*
diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h
index 19063fa..46b4d53 100644
--- a/include/configs/IVMS8.h
+++ b/include/configs/IVMS8.h
@@ -408,7 +408,7 @@
*/
/* periodic timer for refresh */
-#define CFG_MAMR_PTB 204
+#define CFG_MBMR_PTB 204
/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
@@ -431,19 +431,19 @@
#if defined (CONFIG_IVMS8_16M)
/* 8 column SDRAM */
-# define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
- MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 | \
- MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+ MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#elif defined (CONFIG_IVMS8_32M)
/* 128 MBit SDRAM */
-#define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
- MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 | \
- MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
+#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+ MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#elif defined (CONFIG_IVMS8_64M)
/* 128 MBit SDRAM */
-#define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
- MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 | \
- MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
+#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+ MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#endif
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 401591d..5960b30 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -9,7 +9,8 @@
*
* (C) Copyright 2003 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
- * Added support for SDRAM DIMMs SPD EEPROM, MII.
+ * Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2.
+ * Ported to PQ2FADS-ZU board.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -41,6 +42,15 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_MPC8260ADS 1 /* ...on motorola ads board */
+/* ADS flavours */
+#define CFG_8260ADS 1 /* MPC8260ADS */
+#define CFG_8266ADS 2 /* MPC8266ADS */
+#define CFG_PQ2FADS 3 /* PQ2FADS-ZU */
+
+#ifndef CONFIG_ADSTYPE
+#define CONFIG_ADSTYPE CFG_8260ADS
+#endif /* CONFIG_ADSTYPE */
+
#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */
/* allow serial and ethaddr to be overwritten */
@@ -116,7 +126,9 @@
#endif /* CONFIG_ETHER_ON_FCC */
-/* other options */
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#undef CONFIG_SPD_EEPROM /* On PQ2FADS-ZU, SDRAM is soldered */
+#else
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
@@ -124,18 +136,23 @@
#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
#define CONFIG_SPD_ADDR 0x50
#endif
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
#ifndef CONFIG_SDRAM_PBI
#define CONFIG_SDRAM_PBI 1 /* By default, use page-based interleaving */
#endif
#ifndef CONFIG_8260_CLKIN
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#define CONFIG_8260_CLKIN 100000000 /* in Hz */
+#else
#define CONFIG_8260_CLKIN 66666666 /* in Hz */
#endif
+#endif
+
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
- CFG_CMD_BEDBUG | \
+#define CFG_EXCLUDE CFG_CMD_BEDBUG | \
CFG_CMD_BMP | \
CFG_CMD_BSP | \
CFG_CMD_DATE | \
@@ -143,11 +160,11 @@
CFG_CMD_DTT | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
+ CFG_CMD_FAT | \
CFG_CMD_FDC | \
CFG_CMD_FDOS | \
CFG_CMD_HWFLOW | \
CFG_CMD_IDE | \
- CFG_CMD_JFFS2 | \
CFG_CMD_KGDB | \
CFG_CMD_MMC | \
CFG_CMD_NAND | \
@@ -155,8 +172,18 @@
CFG_CMD_PCMCIA | \
CFG_CMD_SCSI | \
CFG_CMD_SPI | \
- CFG_CMD_VFD | \
- CFG_CMD_USB ) )
+ CFG_CMD_USB | \
+ CFG_CMD_VFD
+
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_I2C | \
+ CFG_EXCLUDE ) )
+#else
+#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
+ CFG_EXCLUDE ) )
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -200,7 +227,6 @@
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CFG_FLASH_BASE 0xff800000
-#define FLASH_BASE 0xff800000
#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */
#define CFG_FLASH_SIZE 8
@@ -219,14 +245,16 @@
#define CFG_DEFAULT_IMMR 0x0F010000
#define CFG_IMMR 0xF0000000
-#define CFG_BCSR 0x04500000
+#define CFG_BCSR 0xF4500000
#define CFG_SDRAM_BASE 0x00000000
-#define CFG_LSDRAM_BASE 0x04000000
+#define CFG_LSDRAM_BASE 0xD0000000
#define RS232EN_1 0x02000002
#define RS232EN_2 0x01000001
-#define FETHIEN 0x08000008
-#define FETH_RST 0x04000004
+#define FETHIEN1 0x08000008
+#define FETH1_RST 0x04000004
+#define FETHIEN2 0x01000000
+#define FETH2_RST 0x08000000
#define CFG_INIT_RAM_ADDR CFG_IMMR
#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
@@ -288,19 +316,30 @@
#define CFG_SYPCR 0xFFFFFFC3
#define CFG_BCR 0x100C0000
#define CFG_SIUMCR 0x0A200000
-#define CFG_SCCR 0x00000000
-#define CFG_BR0_PRELIM 0xFF801801
-#define CFG_OR0_PRELIM 0xFF800836
-#define CFG_BR1_PRELIM 0x04501801
+#define CFG_SCCR SCCR_DFBRG01
+#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00001801
+#define CFG_OR0_PRELIM 0xFF800876
+#define CFG_BR1_PRELIM CFG_BCSR | 0x00001801
#define CFG_OR1_PRELIM 0xFFFF8010
-#define CFG_RMR 0
+#define CFG_RMR RMR_CSRE
#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
#define CFG_RCCR 0
+
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#define CFG_PSDMR 0x824B36A3
+#define CFG_PSRT 0x13
+#define CFG_LSDMR 0x828737A3
+#define CFG_LSRT 0x13
+#define CFG_MPTPR 0x2800
+#else
#define CFG_PSDMR 0x016EB452
-#define CFG_MPTPR 0x00001900
-#define CFG_PSRT 0x00000021
+#define CFG_PSRT 0x21
+#define CFG_LSDMR 0x0086A522
+#define CFG_LSRT 0x21
+#define CFG_MPTPR 0x1900
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
#define CFG_RESET_ADDRESS 0x04400000
diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h
new file mode 100644
index 0000000..fc79c52
--- /dev/null
+++ b/include/configs/MPC86xADS.h
@@ -0,0 +1,438 @@
+/*
+ * A collection of structures, addresses, and values associated with
+ * the Motorola MPC8xxADS board. Copied from the FADS config.
+ *
+ * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
+ */
+
+/*
+ * 1999-nov-26: The FADS is using the following physical memorymap:
+ *
+ * ff020000 -> ff02ffff : pcmcia
+ * ff010000 -> ff01ffff : BCSR connected to CS1, setup by 8xxrom
+ * ff000000 -> ff00ffff : IMAP internal in the cpu
+ * fe000000 -> ffnnnnnn : flash connected to CS0, setup by 8xxrom
+ * 00000000 -> nnnnnnnn : sdram/dram setup by 8xxrom
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#include <mpc8xx_irq.h>
+
+/* board type */
+#define CONFIG_MPC86xADS 1 /* new ADS */
+#define CONFIG_FADS 1 /* We are FADS compatible (more or less) */
+
+/* new 86xADS only - pick one of these */
+#define CONFIG_MPC866T 1
+#undef CONFIG_MPC866P
+#undef CONFIG_MPC859T
+#undef CONFIG_MPC859DSL
+#undef CONFIG_MPC852T
+
+#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
+#undef CONFIG_8xx_CONS_SMC2
+#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_BAUDRATE 38400
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+
+#ifdef CONFIG_MPC86xADS
+# define CFG_8XX_FACT 5 /* Multiply by 5 */
+# define CFG_8XX_XIN 10000000 /* 10 MHz in */
+#else /* ! CONFIG_MPC86xADS */
+# if 0 /* old FADS */
+# define CFG_8XX_FACT 12 /* Multiply by 12 */
+# define CFG_8XX_XIN 4000000 /* 4 MHz in */
+# else /* new FADS */
+# define CFG_8XX_FACT 10 /* Multiply by 10 */
+# define CFG_8XX_XIN 5000000 /* 5 MHz in */
+# endif
+#endif /* ! CONFIG_MPC86xADS */
+
+#define MPC8XX_HZ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
+
+/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
+/* in general, we always know this for FADS+new ADS anyway */
+#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
+
+/* most vanilla kernels do not like this, set to 0 if in doubt */
+#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
+
+#if 1
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+ "bootm"
+
+/* #include "local.h" */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/* ATA / IDE and partition support */
+#define CONFIG_MAC_PARTITION 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_ISO_PARTITION 1
+#undef CONFIG_ATAPI
+#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_RESET /* reset for ide not supported */
+
+/* choose SCC1 ethernet (10BASET on motherboard)
+ * or FEC ethernet (10/100 on daughterboard)
+ */
+#if 0
+#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
+#undef CONFIG_FEC_ENET /* disable FEC ethernet */
+#else /* all 86x cores have FECs, if in doubt, use it */
+#undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
+#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
+#define CFG_DISCOVER_PHY
+#endif
+#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
+#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#undef CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=>" /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
+#if (CFG_SDRAM_SIZE)
+#define CFG_MEMTEST_END CFG_SDRAM_SIZE /* 1 ... SDRAM_SIZE */
+#else
+#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
+#endif
+
+#define CFG_LOAD_ADDR 0x00100000
+
+#define CFG_HZ 1000 /* decr freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR 0xFF000000
+#define CFG_IMMR_SIZE ((uint)(64 * 1024))
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#ifdef CONFIG_FADS
+# ifdef CONFIG_MPC86xADS /* new ADS */
+# define CFG_SDRAM_SIZE 0x00800000 /* 8 meg */
+# else /* old/new FADS */
+# define CFG_SDRAM_SIZE 0x00400000 /* 4 meg */
+# endif
+#else /* !CONFIG_FADS */ /* old ADS */
+# define CFG_SDRAM_SIZE 0x00000000 /* NO SDRAM */
+#endif
+
+#define CFG_FLASH_BASE 0x02800000
+
+#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
+
+#define CFG_MONITOR_LEN (272 << 10) /* Reserve 272 kB for Monitor */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 16 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_OFFSET 0x00040000
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+#define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sector total size */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control 11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration 11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control 11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
+ *-----------------------------------------------------------------------
+ * set the PLL, the low-power modes and the reset control (15-29)
+ */
+#define CFG_PLPRCR ((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) | \
+ PLPRCR_SPLSS | PLPRCR_TEXPS)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register 15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK SCCR_EBDF11
+#define CFG_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
+
+ /*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER 0
+
+/* Because of the way the 860 starts up and assigns CS0 the
+* entire address space, we have to set the memory controller
+* differently. Normally, you write the option register
+* first, and then enable the chip select by writing the
+* base register. For CS0, you must write the base register
+* first, followed by the option register.
+*/
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+/* the other CS:s are determined by looking at parameters in BCSRx */
+
+#define BCSR_ADDR ((uint) 0xFF010000)
+#define BCSR_SIZE ((uint)(64 * 1024))
+
+#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
+#define CFG_PRELIM_OR_AM 0xFF800000 /* OR addr mask */
+
+/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
+#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
+
+#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
+
+#ifdef USE_REAL_FLASH_VALUES
+/*
+ * The "default" behaviour with 1Mbyte initial doesn't work for us!
+ */
+#define CFG_OR0_PRELIM 0x0FFC00D34 /* Real values for the board */
+#define CFG_BR0_PRELIM 0x02800001 /* Real values for the board */
+#else
+#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) /* 8 Mbyte until detected */
+#define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BR_BA_MSK) | BR_V )
+#endif
+
+/* BCSRx - Board Control and Status Registers */
+#define CFG_OR1_REMAP CFG_OR0_REMAP
+#define CFG_OR1_PRELIM 0xffff8110 /* 64Kbyte address space */
+#define CFG_BR1_PRELIM ((BCSR_ADDR) | BR_V )
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+/* values according to the manual */
+
+#define PCMCIA_MEM_ADDR ((uint)0xff020000)
+#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
+
+#define BCSR0 ((uint) (BCSR_ADDR + 00))
+#define BCSR1 ((uint) (BCSR_ADDR + 0x04))
+#define BCSR2 ((uint) (BCSR_ADDR + 0x08))
+#define BCSR3 ((uint) (BCSR_ADDR + 0x0c))
+#define BCSR4 ((uint) (BCSR_ADDR + 0x10))
+
+/* FADS bitvalues by Helmut Buchsbaum
+ * see MPC8xxADS User's Manual for a proper description
+ * of the following structures
+ */
+
+#define BCSR0_ERB ((uint)0x80000000)
+#define BCSR0_IP ((uint)0x40000000)
+#define BCSR0_BDIS ((uint)0x10000000)
+#define BCSR0_BPS_MASK ((uint)0x0C000000)
+#define BCSR0_ISB_MASK ((uint)0x01800000)
+#define BCSR0_DBGC_MASK ((uint)0x00600000)
+#define BCSR0_DBPC_MASK ((uint)0x00180000)
+#define BCSR0_EBDF_MASK ((uint)0x00060000)
+
+#define BCSR1_FLASH_EN ((uint)0x80000000)
+#define BCSR1_DRAM_EN ((uint)0x40000000)
+#define BCSR1_ETHEN ((uint)0x20000000)
+#define BCSR1_IRDEN ((uint)0x10000000)
+#define BCSR1_FLASH_CFG_EN ((uint)0x08000000)
+#define BCSR1_CNT_REG_EN_PROTECT ((uint)0x04000000)
+#define BCSR1_BCSR_EN ((uint)0x02000000)
+#define BCSR1_RS232EN_1 ((uint)0x01000000)
+#define BCSR1_PCCEN ((uint)0x00800000)
+#define BCSR1_PCCVCC0 ((uint)0x00400000)
+#define BCSR1_PCCVPP_MASK ((uint)0x00300000)
+#define BCSR1_DRAM_HALF_WORD ((uint)0x00080000)
+#define BCSR1_RS232EN_2 ((uint)0x00040000)
+#define BCSR1_SDRAM_EN ((uint)0x00020000)
+#define BCSR1_PCCVCC1 ((uint)0x00010000)
+
+#define BCSR2_FLASH_PD_MASK ((uint)0xF0000000)
+#define BCSR2_DRAM_PD_MASK ((uint)0x07800000)
+#define BCSR2_DRAM_PD_SHIFT (23)
+#define BCSR2_EXTTOLI_MASK ((uint)0x00780000)
+#define BCSR2_DBREVNR_MASK ((uint)0x00030000)
+
+#define BCSR3_DBID_MASK ((ushort)0x3800)
+#define BCSR3_CNT_REG_EN_PROTECT ((ushort)0x0400)
+#define BCSR3_BREVNR0 ((ushort)0x0080)
+#define BCSR3_FLASH_PD_MASK ((ushort)0x0070)
+#define BCSR3_BREVN1 ((ushort)0x0008)
+#define BCSR3_BREVN2_MASK ((ushort)0x0003)
+
+#define BCSR4_ETHLOOP ((uint)0x80000000)
+#define BCSR4_TFPLDL ((uint)0x40000000)
+#define BCSR4_TPSQEL ((uint)0x20000000)
+#define BCSR4_SIGNAL_LAMP ((uint)0x10000000)
+#define BCSR4_FETH_EN ((uint)0x08000000)
+#define BCSR4_FETHCFG0 ((uint)0x04000000)
+#define BCSR4_FETHFDE ((uint)0x02000000)
+#define BCSR4_FETHCFG1 ((uint)0x00400000)
+#define BCSR4_FETHRST ((uint)0x00200000)
+
+#define CONFIG_DRAM_50MHZ 1
+#define CONFIG_SDRAM_50MHZ 1
+
+/* Interrupt level assignments.
+*/
+#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
+
+/* We don't use the 8259.
+*/
+#define NR_8259_INTS 0
+
+/* Machine type
+*/
+#define _MACH_8xx (_MACH_fads)
+
+#define CONFIG_DISK_SPINUP_TIME 1000000
+
+
+/* PCMCIA configuration */
+
+#define PCMCIA_MAX_SLOTS 2
+
+#ifdef CONFIG_MPC860
+#define PCMCIA_SLOT_A 1
+#endif
+/*#define CFG_PCMCIA_MEM_SIZE ( 64 << 20) */
+#define CFG_PCMCIA_MEM_ADDR (0x50000000)
+#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR (0x54000000)
+#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR (0x58000000)
+#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR (0x5C000000)
+#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
+/* we have 8 windows, we take everything up to 60000000 */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET 0x0000
+/*#define CFG_ATA_ALT_OFFSET 0x0100 */
+
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index 959ee1a..9746b64 100644
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -331,8 +331,7 @@
*
*/
/* #define CFG_DER 0x2002000F */
-/* #define CFG_DER 0 */
-#define CFG_DER 0x0082000F
+#define CFG_DER 0
/*
* Init Memory Controller:
diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h
index 51f2c25..ae4dcc2 100644
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -381,7 +381,7 @@
*/
/* periodic timer for refresh */
-#define CFG_MAMR_PTB 204
+#define CFG_MBMR_PTB 204
/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
@@ -396,9 +396,9 @@
*/
/* 8 column SDRAM */
-#define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
- MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 | \
- MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
+#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+ MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
/*
* Internal Definitions
diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
index 42877a7..31f1e56 100644
--- a/include/configs/pcu_e.h
+++ b/include/configs/pcu_e.h
@@ -518,11 +518,11 @@
#define CFG_MAMR_PTA 0x30 /* = 48 */
#define CFG_MAMR ( (CFG_MAMR_PTA << MAMR_PTA_SHIFT) | \
- MAMR_AMB_TYPE_1 | \
- MAMR_G0CLB_A10 | \
- MAMR_RLFB_1X | \
- MAMR_WLFB_1X | \
- MAMR_TLFB_8X )
+ MAMR_AMA_TYPE_1 | \
+ MAMR_G0CLA_A10 | \
+ MAMR_RLFA_1X | \
+ MAMR_WLFA_1X | \
+ MAMR_TLFA_8X )
/*
* Internal Definitions
diff --git a/include/configs/v37.h b/include/configs/v37.h
index 6696985..45bc353 100644
--- a/include/configs/v37.h
+++ b/include/configs/v37.h
@@ -296,8 +296,7 @@
*-----------------------------------------------------------------------
*
*/
-#define CFG_DER 0x0082000F
-/*#define CFG_DER 0*/
+#define CFG_DER 0
/*
* Init Memory Controller:
diff --git a/include/mpc8xx.h b/include/mpc8xx.h
index 1a65f10..e74d146 100644
--- a/include/mpc8xx.h
+++ b/include/mpc8xx.h
@@ -12,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -121,8 +121,8 @@
* RSR - Reset Status Register 5-4
*/
#define RSR_JTRS 0x01000000 /* JTAG Reset Status */
-#define RSR_DBSRS 0x02000000 /* Debug Port Soft Reset Status */
-#define RSR_DBHRS 0x04000000 /* Debug Port Hard Reset Status */
+#define RSR_DBSRS 0x02000000 /* Debug Port Soft Reset Status */
+#define RSR_DBHRS 0x04000000 /* Debug Port Hard Reset Status */
#define RSR_CSRS 0x08000000 /* Check Stop Reset Status */
#define RSR_SWRS 0x10000000 /* Software Watchdog Reset Status*/
#define RSR_LLRS 0x20000000 /* Loss-of-Lock Reset Status */
@@ -134,21 +134,42 @@
/*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
*/
-#define PLPRCR_MF_MSK 0xFFF00000 /* Multiplication factor bits */
+#ifdef CONFIG_MPC866_et_al
+#define PLPRCR_MF_MSK 0xffff0000 /* Multiplication factor bits */
+#define PLPRCR_MFN_MSK 0xf8000000 /* Multiplication factor numerator bits */
+#define PLPRCR_MFN_SHIFT 0x0000001b /* Multiplication factor numerator shift*/
+#define PLPRCR_MFD_MSK 0x03c00000 /* Multiplication factor denominator bits */
+#define PLPRCR_MFD_SHIFT 0x00000017 /* Multiplication factor denominator shift*/
+#define PLPRCR_S_MSK 0x00300000 /* Multiplication factor integer bits */
+#define PLPRCR_S_SHIFT 0x00000014 /* Multiplication factor integer shift*/
+#define PLPRCR_MFI_MSK 0x000f0000 /* Multiplication factor integer bits */
+#define PLPRCR_MFI_SHIFT 0x00000010 /* Multiplication factor integer shift*/
+#else
+#define PLPRCR_MF_MSK 0xfff00000 /* Multiplication factor bits */
#define PLPRCR_MF_SHIFT 0x00000014 /* Multiplication factor shift value */
+#endif
#define PLPRCR_SPLSS 0x00008000 /* SPLL Lock Status Sticky bit */
#define PLPRCR_TEXPS 0x00004000 /* TEXP Status */
+#ifndef CONFIG_MPC866_et_al
#define PLPRCR_TMIST 0x00001000 /* Timers Interrupt Status */
+#endif
#define PLPRCR_CSRC 0x00000400 /* Clock Source */
+#ifndef CONFIG_MPC866_et_al
#define PLPRCR_LPM_MSK 0x00000300 /* Low Power Mode mask */
#define PLPRCR_LPM_NORMAL 0x00000000 /* normal power management mode */
#define PLPRCR_LPM_DOZE 0x00000100 /* doze power management mode */
#define PLPRCR_LPM_SLEEP 0x00000200 /* sleep power management mode */
#define PLPRCR_LPM_DEEP_SLEEP 0x00000300 /* deep sleep power mgt mode */
#define PLPRCR_LPM_DOWN 0x00000300 /* down power management mode */
+#endif
#define PLPRCR_CSR 0x00000080 /* CheskStop Reset value */
#define PLPRCR_LOLRE 0x00000040 /* Loss Of Lock Reset Enable */
#define PLPRCR_FIOPD 0x00000020 /* Force I/O Pull Down */
+#ifdef CONFIG_MPC866_et_al
+#define PLPRCR_PDF_MSK 0x0000001e /* Predivision Factor bits */
+#define PLPRCR_PDF_SHIFT 0x00000001 /* Predivision Factor shift value */
+#define PLPRCR_DBRMO 0x00000001 /* DPLL BRM Order bit */
+#endif
/*-----------------------------------------------------------------------
* SCCR - System Clock and reset Control Register 15-27
@@ -261,8 +282,8 @@
* MCR - Memory Command Register
*/
#define MCR_OP_WRITE 0x00000000 /* WRITE command */
-#define MCR_OP_READ 0x40000000 /* READ command */
-#define MCR_OP_RUN 0x80000000 /* RUN command */
+#define MCR_OP_READ 0x40000000 /* READ command */
+#define MCR_OP_RUN 0x80000000 /* RUN command */
#define MCR_UPM_A 0x00000000 /* Select UPM A */
#define MCR_UPM_B 0x00800000 /* Select UPM B */
#define MCR_MB_CS0 0x00000000 /* Use Chip Select /CS0 */
@@ -359,138 +380,138 @@
/*-----------------------------------------------------------------------
* Machine B Mode Register 16-13
*/
-#define MAMR_PTB_MSK 0xFF000000 /* Periodic Timer B period mask */
-#define MAMR_PTB_SHIFT 0x00000018 /* Periodic Timer B period shift */
-#define MAMR_PTBE 0x00800000 /* Periodic Timer B Enable */
-#define MAMR_AMB_MSK 0x00700000 /* Addess Multiplex size B */
-#define MAMR_AMB_TYPE_0 0x00000000 /* Addess Multiplexing Type 0 */
-#define MAMR_AMB_TYPE_1 0x00100000 /* Addess Multiplexing Type 1 */
-#define MAMR_AMB_TYPE_2 0x00200000 /* Addess Multiplexing Type 2 */
-#define MAMR_AMB_TYPE_3 0x00300000 /* Addess Multiplexing Type 3 */
-#define MAMR_AMB_TYPE_4 0x00400000 /* Addess Multiplexing Type 4 */
-#define MAMR_AMB_TYPE_5 0x00500000 /* Addess Multiplexing Type 5 */
-#define MAMR_DSB_MSK 0x00060000 /* Disable Timer period mask */
-#define MAMR_DSB_1_CYCL 0x00000000 /* 1 cycle Disable Period */
-#define MAMR_DSB_2_CYCL 0x00020000 /* 2 cycle Disable Period */
-#define MAMR_DSB_3_CYCL 0x00040000 /* 3 cycle Disable Period */
-#define MAMR_DSB_4_CYCL 0x00060000 /* 4 cycle Disable Period */
-#define MAMR_G0CLB_MSK 0x0000E000 /* General Line 0 Control B */
-#define MAMR_G0CLB_A12 0x00000000 /* General Line 0 : A12 */
-#define MAMR_G0CLB_A11 0x00002000 /* General Line 0 : A11 */
-#define MAMR_G0CLB_A10 0x00004000 /* General Line 0 : A10 */
-#define MAMR_G0CLB_A9 0x00006000 /* General Line 0 : A9 */
-#define MAMR_G0CLB_A8 0x00008000 /* General Line 0 : A8 */
-#define MAMR_G0CLB_A7 0x0000A000 /* General Line 0 : A7 */
-#define MAMR_G0CLB_A6 0x0000C000 /* General Line 0 : A6 */
-#define MAMR_G0CLB_A5 0x0000E000 /* General Line 0 : A5 */
-#define MAMR_GPL_B4DIS 0x00001000 /* GPL_B4 ouput line Disable */
-#define MAMR_RLFB_MSK 0x00000F00 /* Read Loop Field B mask */
-#define MAMR_RLFB_1X 0x00000100 /* The Read Loop is executed 1 time */
-#define MAMR_RLFB_2X 0x00000200 /* The Read Loop is executed 2 times */
-#define MAMR_RLFB_3X 0x00000300 /* The Read Loop is executed 3 times */
-#define MAMR_RLFB_4X 0x00000400 /* The Read Loop is executed 4 times */
-#define MAMR_RLFB_5X 0x00000500 /* The Read Loop is executed 5 times */
-#define MAMR_RLFB_6X 0x00000600 /* The Read Loop is executed 6 times */
-#define MAMR_RLFB_7X 0x00000700 /* The Read Loop is executed 7 times */
-#define MAMR_RLFB_8X 0x00000800 /* The Read Loop is executed 8 times */
-#define MAMR_RLFB_9X 0x00000900 /* The Read Loop is executed 9 times */
-#define MAMR_RLFB_10X 0x00000A00 /* The Read Loop is executed 10 times */
-#define MAMR_RLFB_11X 0x00000B00 /* The Read Loop is executed 11 times */
-#define MAMR_RLFB_12X 0x00000C00 /* The Read Loop is executed 12 times */
-#define MAMR_RLFB_13X 0x00000D00 /* The Read Loop is executed 13 times */
-#define MAMR_RLFB_14X 0x00000E00 /* The Read Loop is executed 14 times */
-#define MAMR_RLFB_15X 0x00000f00 /* The Read Loop is executed 15 times */
-#define MAMR_RLFB_16X 0x00000000 /* The Read Loop is executed 16 times */
-#define MAMR_WLFB_MSK 0x000000F0 /* Write Loop Field B mask */
-#define MAMR_WLFB_1X 0x00000010 /* The Write Loop is executed 1 time */
-#define MAMR_WLFB_2X 0x00000020 /* The Write Loop is executed 2 times */
-#define MAMR_WLFB_3X 0x00000030 /* The Write Loop is executed 3 times */
-#define MAMR_WLFB_4X 0x00000040 /* The Write Loop is executed 4 times */
-#define MAMR_WLFB_5X 0x00000050 /* The Write Loop is executed 5 times */
-#define MAMR_WLFB_6X 0x00000060 /* The Write Loop is executed 6 times */
-#define MAMR_WLFB_7X 0x00000070 /* The Write Loop is executed 7 times */
-#define MAMR_WLFB_8X 0x00000080 /* The Write Loop is executed 8 times */
-#define MAMR_WLFB_9X 0x00000090 /* The Write Loop is executed 9 times */
-#define MAMR_WLFB_10X 0x000000A0 /* The Write Loop is executed 10 times */
-#define MAMR_WLFB_11X 0x000000B0 /* The Write Loop is executed 11 times */
-#define MAMR_WLFB_12X 0x000000C0 /* The Write Loop is executed 12 times */
-#define MAMR_WLFB_13X 0x000000D0 /* The Write Loop is executed 13 times */
-#define MAMR_WLFB_14X 0x000000E0 /* The Write Loop is executed 14 times */
-#define MAMR_WLFB_15X 0x000000F0 /* The Write Loop is executed 15 times */
-#define MAMR_WLFB_16X 0x00000000 /* The Write Loop is executed 16 times */
-#define MAMR_TLFB_MSK 0x0000000F /* Timer Loop Field B mask */
-#define MAMR_TLFB_1X 0x00000001 /* The Timer Loop is executed 1 time */
-#define MAMR_TLFB_2X 0x00000002 /* The Timer Loop is executed 2 times */
-#define MAMR_TLFB_3X 0x00000003 /* The Timer Loop is executed 3 times */
-#define MAMR_TLFB_4X 0x00000004 /* The Timer Loop is executed 4 times */
-#define MAMR_TLFB_5X 0x00000005 /* The Timer Loop is executed 5 times */
-#define MAMR_TLFB_6X 0x00000006 /* The Timer Loop is executed 6 times */
-#define MAMR_TLFB_7X 0x00000007 /* The Timer Loop is executed 7 times */
-#define MAMR_TLFB_8X 0x00000008 /* The Timer Loop is executed 8 times */
-#define MAMR_TLFB_9X 0x00000009 /* The Timer Loop is executed 9 times */
-#define MAMR_TLFB_10X 0x0000000A /* The Timer Loop is executed 10 times */
-#define MAMR_TLFB_11X 0x0000000B /* The Timer Loop is executed 11 times */
-#define MAMR_TLFB_12X 0x0000000C /* The Timer Loop is executed 12 times */
-#define MAMR_TLFB_13X 0x0000000D /* The Timer Loop is executed 13 times */
-#define MAMR_TLFB_14X 0x0000000E /* The Timer Loop is executed 14 times */
-#define MAMR_TLFB_15X 0x0000000F /* The Timer Loop is executed 15 times */
-#define MAMR_TLFB_16X 0x00000000 /* The Timer Loop is executed 16 times */
+#define MBMR_PTB_MSK 0xFF000000 /* Periodic Timer B period mask */
+#define MBMR_PTB_SHIFT 0x00000018 /* Periodic Timer B period shift */
+#define MBMR_PTBE 0x00800000 /* Periodic Timer B Enable */
+#define MBMR_AMB_MSK 0x00700000 /* Addess Multiplex size B */
+#define MBMR_AMB_TYPE_0 0x00000000 /* Addess Multiplexing Type 0 */
+#define MBMR_AMB_TYPE_1 0x00100000 /* Addess Multiplexing Type 1 */
+#define MBMR_AMB_TYPE_2 0x00200000 /* Addess Multiplexing Type 2 */
+#define MBMR_AMB_TYPE_3 0x00300000 /* Addess Multiplexing Type 3 */
+#define MBMR_AMB_TYPE_4 0x00400000 /* Addess Multiplexing Type 4 */
+#define MBMR_AMB_TYPE_5 0x00500000 /* Addess Multiplexing Type 5 */
+#define MBMR_DSB_MSK 0x00060000 /* Disable Timer period mask */
+#define MBMR_DSB_1_CYCL 0x00000000 /* 1 cycle Disable Period */
+#define MBMR_DSB_2_CYCL 0x00020000 /* 2 cycle Disable Period */
+#define MBMR_DSB_3_CYCL 0x00040000 /* 3 cycle Disable Period */
+#define MBMR_DSB_4_CYCL 0x00060000 /* 4 cycle Disable Period */
+#define MBMR_G0CLB_MSK 0x0000E000 /* General Line 0 Control B */
+#define MBMR_G0CLB_A12 0x00000000 /* General Line 0 : A12 */
+#define MBMR_G0CLB_A11 0x00002000 /* General Line 0 : A11 */
+#define MBMR_G0CLB_A10 0x00004000 /* General Line 0 : A10 */
+#define MBMR_G0CLB_A9 0x00006000 /* General Line 0 : A9 */
+#define MBMR_G0CLB_A8 0x00008000 /* General Line 0 : A8 */
+#define MBMR_G0CLB_A7 0x0000A000 /* General Line 0 : A7 */
+#define MBMR_G0CLB_A6 0x0000C000 /* General Line 0 : A6 */
+#define MBMR_G0CLB_A5 0x0000E000 /* General Line 0 : A5 */
+#define MBMR_GPL_B4DIS 0x00001000 /* GPL_B4 ouput line Disable */
+#define MBMR_RLFB_MSK 0x00000F00 /* Read Loop Field B mask */
+#define MBMR_RLFB_1X 0x00000100 /* The Read Loop is executed 1 time */
+#define MBMR_RLFB_2X 0x00000200 /* The Read Loop is executed 2 times */
+#define MBMR_RLFB_3X 0x00000300 /* The Read Loop is executed 3 times */
+#define MBMR_RLFB_4X 0x00000400 /* The Read Loop is executed 4 times */
+#define MBMR_RLFB_5X 0x00000500 /* The Read Loop is executed 5 times */
+#define MBMR_RLFB_6X 0x00000600 /* The Read Loop is executed 6 times */
+#define MBMR_RLFB_7X 0x00000700 /* The Read Loop is executed 7 times */
+#define MBMR_RLFB_8X 0x00000800 /* The Read Loop is executed 8 times */
+#define MBMR_RLFB_9X 0x00000900 /* The Read Loop is executed 9 times */
+#define MBMR_RLFB_10X 0x00000A00 /* The Read Loop is executed 10 times */
+#define MBMR_RLFB_11X 0x00000B00 /* The Read Loop is executed 11 times */
+#define MBMR_RLFB_12X 0x00000C00 /* The Read Loop is executed 12 times */
+#define MBMR_RLFB_13X 0x00000D00 /* The Read Loop is executed 13 times */
+#define MBMR_RLFB_14X 0x00000E00 /* The Read Loop is executed 14 times */
+#define MBMR_RLFB_15X 0x00000f00 /* The Read Loop is executed 15 times */
+#define MBMR_RLFB_16X 0x00000000 /* The Read Loop is executed 16 times */
+#define MBMR_WLFB_MSK 0x000000F0 /* Write Loop Field B mask */
+#define MBMR_WLFB_1X 0x00000010 /* The Write Loop is executed 1 time */
+#define MBMR_WLFB_2X 0x00000020 /* The Write Loop is executed 2 times */
+#define MBMR_WLFB_3X 0x00000030 /* The Write Loop is executed 3 times */
+#define MBMR_WLFB_4X 0x00000040 /* The Write Loop is executed 4 times */
+#define MBMR_WLFB_5X 0x00000050 /* The Write Loop is executed 5 times */
+#define MBMR_WLFB_6X 0x00000060 /* The Write Loop is executed 6 times */
+#define MBMR_WLFB_7X 0x00000070 /* The Write Loop is executed 7 times */
+#define MBMR_WLFB_8X 0x00000080 /* The Write Loop is executed 8 times */
+#define MBMR_WLFB_9X 0x00000090 /* The Write Loop is executed 9 times */
+#define MBMR_WLFB_10X 0x000000A0 /* The Write Loop is executed 10 times */
+#define MBMR_WLFB_11X 0x000000B0 /* The Write Loop is executed 11 times */
+#define MBMR_WLFB_12X 0x000000C0 /* The Write Loop is executed 12 times */
+#define MBMR_WLFB_13X 0x000000D0 /* The Write Loop is executed 13 times */
+#define MBMR_WLFB_14X 0x000000E0 /* The Write Loop is executed 14 times */
+#define MBMR_WLFB_15X 0x000000F0 /* The Write Loop is executed 15 times */
+#define MBMR_WLFB_16X 0x00000000 /* The Write Loop is executed 16 times */
+#define MBMR_TLFB_MSK 0x0000000F /* Timer Loop Field B mask */
+#define MBMR_TLFB_1X 0x00000001 /* The Timer Loop is executed 1 time */
+#define MBMR_TLFB_2X 0x00000002 /* The Timer Loop is executed 2 times */
+#define MBMR_TLFB_3X 0x00000003 /* The Timer Loop is executed 3 times */
+#define MBMR_TLFB_4X 0x00000004 /* The Timer Loop is executed 4 times */
+#define MBMR_TLFB_5X 0x00000005 /* The Timer Loop is executed 5 times */
+#define MBMR_TLFB_6X 0x00000006 /* The Timer Loop is executed 6 times */
+#define MBMR_TLFB_7X 0x00000007 /* The Timer Loop is executed 7 times */
+#define MBMR_TLFB_8X 0x00000008 /* The Timer Loop is executed 8 times */
+#define MBMR_TLFB_9X 0x00000009 /* The Timer Loop is executed 9 times */
+#define MBMR_TLFB_10X 0x0000000A /* The Timer Loop is executed 10 times */
+#define MBMR_TLFB_11X 0x0000000B /* The Timer Loop is executed 11 times */
+#define MBMR_TLFB_12X 0x0000000C /* The Timer Loop is executed 12 times */
+#define MBMR_TLFB_13X 0x0000000D /* The Timer Loop is executed 13 times */
+#define MBMR_TLFB_14X 0x0000000E /* The Timer Loop is executed 14 times */
+#define MBMR_TLFB_15X 0x0000000F /* The Timer Loop is executed 15 times */
+#define MBMR_TLFB_16X 0x00000000 /* The Timer Loop is executed 16 times */
/*-----------------------------------------------------------------------
* Timer Global Configuration Register 18-8
*/
#define TGCR_CAS4 0x8000 /* Cascade Timer 3 and 4 */
#define TGCR_FRZ4 0x4000 /* Freeze timer 4 */
-#define TGCR_STP4 0x2000 /* Stop timer 4 */
-#define TGCR_RST4 0x1000 /* Reset timer 4 */
+#define TGCR_STP4 0x2000 /* Stop timer 4 */
+#define TGCR_RST4 0x1000 /* Reset timer 4 */
#define TGCR_GM2 0x0800 /* Gate Mode for Pin 2 */
#define TGCR_FRZ3 0x0400 /* Freeze timer 3 */
-#define TGCR_STP3 0x0200 /* Stop timer 3 */
-#define TGCR_RST3 0x0100 /* Reset timer 3 */
+#define TGCR_STP3 0x0200 /* Stop timer 3 */
+#define TGCR_RST3 0x0100 /* Reset timer 3 */
#define TGCR_CAS2 0x0080 /* Cascade Timer 1 and 2 */
#define TGCR_FRZ2 0x0040 /* Freeze timer 2 */
-#define TGCR_STP2 0x0020 /* Stop timer 2 */
-#define TGCR_RST2 0x0010 /* Reset timer 2 */
+#define TGCR_STP2 0x0020 /* Stop timer 2 */
+#define TGCR_RST2 0x0010 /* Reset timer 2 */
#define TGCR_GM1 0x0008 /* Gate Mode for Pin 1 */
#define TGCR_FRZ1 0x0004 /* Freeze timer 1 */
-#define TGCR_STP1 0x0002 /* Stop timer 1 */
-#define TGCR_RST1 0x0001 /* Reset timer 1 */
+#define TGCR_STP1 0x0002 /* Stop timer 1 */
+#define TGCR_RST1 0x0001 /* Reset timer 1 */
/*-----------------------------------------------------------------------
* Timer Mode Register 18-9
*/
-#define TMR_PS_MSK 0xFF00 /* Prescaler Value */
-#define TMR_PS_SHIFT 8 /* Prescaler position */
-#define TMR_CE_MSK 0x00C0 /* Capture Edge and Enable Interrupt */
-#define TMR_CE_INTR_DIS 0x0000 /* Disable Interrupt on capture event */
-#define TMR_CE_RISING 0x0040 /* Capture on Rising TINx edge only */
-#define TMR_CE_FALLING 0x0080 /* Capture on Falling TINx edge only */
-#define TMR_CE_ANY 0x00C0 /* Capture on any TINx edge */
-#define TMR_OM 0x0020 /* Output Mode */
-#define TMR_ORI 0x0010 /* Output Reference Interrupt Enable */
-#define TMR_FRR 0x0008 /* Free Run/Restart */
-#define TMR_ICLK_MSK 0x0006 /* Timer Input Clock Source mask */
-#define TMR_ICLK_IN_CAS 0x0000 /* Internally cascaded input */
-#define TMR_ICLK_IN_GEN 0x0002 /* Internal General system clock */
-#define TMR_ICLK_IN_GEN_DIV16 0x0004 /* Internal General system clk div 16 */
-#define TMR_ICLK_TIN_PIN 0x0006 /* TINx pin */
-#define TMR_GE 0x0001 /* Gate Enable */
+#define TMR_PS_MSK 0xFF00 /* Prescaler Value */
+#define TMR_PS_SHIFT 8 /* Prescaler position */
+#define TMR_CE_MSK 0x00C0 /* Capture Edge and Enable Interrupt */
+#define TMR_CE_INTR_DIS 0x0000 /* Disable Interrupt on capture event */
+#define TMR_CE_RISING 0x0040 /* Capture on Rising TINx edge only */
+#define TMR_CE_FALLING 0x0080 /* Capture on Falling TINx edge only */
+#define TMR_CE_ANY 0x00C0 /* Capture on any TINx edge */
+#define TMR_OM 0x0020 /* Output Mode */
+#define TMR_ORI 0x0010 /* Output Reference Interrupt Enable */
+#define TMR_FRR 0x0008 /* Free Run/Restart */
+#define TMR_ICLK_MSK 0x0006 /* Timer Input Clock Source mask */
+#define TMR_ICLK_IN_CAS 0x0000 /* Internally cascaded input */
+#define TMR_ICLK_IN_GEN 0x0002 /* Internal General system clock */
+#define TMR_ICLK_IN_GEN_DIV16 0x0004 /* Internal General system clk div 16 */
+#define TMR_ICLK_TIN_PIN 0x0006 /* TINx pin */
+#define TMR_GE 0x0001 /* Gate Enable */
/*-----------------------------------------------------------------------
* I2C Controller Registers
*/
-#define I2MOD_REVD 0x20 /* Reverese Data */
+#define I2MOD_REVD 0x20 /* Reverese Data */
#define I2MOD_GCD 0x10 /* General Call Disable */
#define I2MOD_FLT 0x08 /* Clock Filter */
#define I2MOD_PDIV32 0x00 /* Pre-Divider 32 */
#define I2MOD_PDIV16 0x02 /* Pre-Divider 16 */
-#define I2MOD_PDIV8 0x04 /* Pre-Divider 8 */
-#define I2MOD_PDIV4 0x06 /* Pre-Divider 4 */
+#define I2MOD_PDIV8 0x04 /* Pre-Divider 8 */
+#define I2MOD_PDIV4 0x06 /* Pre-Divider 4 */
#define I2MOD_EN 0x01 /* Enable */
-#define I2CER_TXE 0x10 /* Tx Error */
+#define I2CER_TXE 0x10 /* Tx Error */
#define I2CER_BSY 0x04 /* Busy Condition */
#define I2CER_TXB 0x02 /* Tx Buffer Transmitted */
#define I2CER_RXB 0x01 /* Rx Buffer Received */
@@ -514,7 +535,7 @@
/*-----------------------------------------------------------------------
* PCMCIA Interface General Control Register 17-12
*/
-#define PCMCIA_GCRX_CXRESET 0x00000040
+#define PCMCIA_GCRX_CXRESET 0x00000040
#define PCMCIA_GCRX_CXOE 0x00000080
#define PCMCIA_VS1(slot) (0x80000000 >> (slot << 4))
@@ -539,36 +560,36 @@
*
* Bank Sizes:
*/
-#define PCMCIA_BSIZE_1 0x00000000 /* Bank size: 1 Bytes */
-#define PCMCIA_BSIZE_2 0x08000000 /* Bank size: 2 Bytes */
-#define PCMCIA_BSIZE_4 0x18000000 /* Bank size: 4 Bytes */
-#define PCMCIA_BSIZE_8 0x10000000 /* Bank size: 8 Bytes */
-#define PCMCIA_BSIZE_16 0x30000000 /* Bank size: 16 Bytes */
-#define PCMCIA_BSIZE_32 0x38000000 /* Bank size: 32 Bytes */
-#define PCMCIA_BSIZE_64 0x28000000 /* Bank size: 64 Bytes */
-#define PCMCIA_BSIZE_128 0x20000000 /* Bank size: 128 Bytes */
-#define PCMCIA_BSIZE_256 0x60000000 /* Bank size: 256 Bytes */
-#define PCMCIA_BSIZE_512 0x68000000 /* Bank size: 512 Bytes */
-#define PCMCIA_BSIZE_1K 0x78000000 /* Bank size: 1 kB */
-#define PCMCIA_BSIZE_2K 0x70000000 /* Bank size: 2 kB */
-#define PCMCIA_BSIZE_4K 0x50000000 /* Bank size: 4 kB */
-#define PCMCIA_BSIZE_8K 0x58000000 /* Bank size: 8 kB */
+#define PCMCIA_BSIZE_1 0x00000000 /* Bank size: 1 Bytes */
+#define PCMCIA_BSIZE_2 0x08000000 /* Bank size: 2 Bytes */
+#define PCMCIA_BSIZE_4 0x18000000 /* Bank size: 4 Bytes */
+#define PCMCIA_BSIZE_8 0x10000000 /* Bank size: 8 Bytes */
+#define PCMCIA_BSIZE_16 0x30000000 /* Bank size: 16 Bytes */
+#define PCMCIA_BSIZE_32 0x38000000 /* Bank size: 32 Bytes */
+#define PCMCIA_BSIZE_64 0x28000000 /* Bank size: 64 Bytes */
+#define PCMCIA_BSIZE_128 0x20000000 /* Bank size: 128 Bytes */
+#define PCMCIA_BSIZE_256 0x60000000 /* Bank size: 256 Bytes */
+#define PCMCIA_BSIZE_512 0x68000000 /* Bank size: 512 Bytes */
+#define PCMCIA_BSIZE_1K 0x78000000 /* Bank size: 1 kB */
+#define PCMCIA_BSIZE_2K 0x70000000 /* Bank size: 2 kB */
+#define PCMCIA_BSIZE_4K 0x50000000 /* Bank size: 4 kB */
+#define PCMCIA_BSIZE_8K 0x58000000 /* Bank size: 8 kB */
#define PCMCIA_BSIZE_16K 0x48000000 /* Bank size: 16 kB */
#define PCMCIA_BSIZE_32K 0x40000000 /* Bank size: 32 kB */
#define PCMCIA_BSIZE_64K 0xC0000000 /* Bank size: 64 kB */
#define PCMCIA_BSIZE_128K 0xC8000000 /* Bank size: 128 kB */
#define PCMCIA_BSIZE_256K 0xD8000000 /* Bank size: 256 kB */
#define PCMCIA_BSIZE_512K 0xD0000000 /* Bank size: 512 kB */
-#define PCMCIA_BSIZE_1M 0xF0000000 /* Bank size: 1 MB */
-#define PCMCIA_BSIZE_2M 0xF8000000 /* Bank size: 2 MB */
-#define PCMCIA_BSIZE_4M 0xE8000000 /* Bank size: 4 MB */
-#define PCMCIA_BSIZE_8M 0xE0000000 /* Bank size: 8 MB */
+#define PCMCIA_BSIZE_1M 0xF0000000 /* Bank size: 1 MB */
+#define PCMCIA_BSIZE_2M 0xF8000000 /* Bank size: 2 MB */
+#define PCMCIA_BSIZE_4M 0xE8000000 /* Bank size: 4 MB */
+#define PCMCIA_BSIZE_8M 0xE0000000 /* Bank size: 8 MB */
#define PCMCIA_BSIZE_16M 0xA0000000 /* Bank size: 16 MB */
#define PCMCIA_BSIZE_32M 0xA8000000 /* Bank size: 32 MB */
#define PCMCIA_BSIZE_64M 0xB8000000 /* Bank size: 64 MB */
/* PCMCIA Timing */
-#define PCMCIA_SHT(t) ((t & 0x0F)<<16) /* Strobe Hold Time */
+#define PCMCIA_SHT(t) ((t & 0x0F)<<16) /* Strobe Hold Time */
#define PCMCIA_SST(t) ((t & 0x0F)<<12) /* Strobe Setup Time */
#define PCMCIA_SL(t) ((t==32) ? 0 : ((t & 0x1F)<<7)) /* Strobe Length */
@@ -579,10 +600,10 @@
/* PCMCIA Region Select */
#define PCMCIA_PRS_MEM 0x00000000 /* Common Memory Space */
#define PCMCIA_PRS_ATTR 0x00000010 /* Attribute Space */
-#define PCMCIA_PRS_IO 0x00000018 /* I/O Space */
-#define PCMCIA_PRS_DMA 0x00000020 /* DMA, normal transfer */
+#define PCMCIA_PRS_IO 0x00000018 /* I/O Space */
+#define PCMCIA_PRS_DMA 0x00000020 /* DMA, normal transfer */
#define PCMCIA_PRS_DMA_LAST 0x00000028 /* DMA, last transactn */
-#define PCMCIA_PRS_CEx 0x00000030 /* A[22:23] ==> CE1,CE2 */
+#define PCMCIA_PRS_CEx 0x00000030 /* A[22:23] ==> CE1,CE2 */
#define PCMCIA_PSLOT_A 0x00000000 /* Slot A */
#define PCMCIA_PSLOT_B 0x00000004 /* Slot B */
diff --git a/include/pcmcia.h b/include/pcmcia.h
index 1609632..388b149 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -43,7 +43,7 @@
#elif defined(CONFIG_ADS) /* The ADS board use SLOT_A */
# define CONFIG_PCMCIA_SLOT_A
#elif defined(CONFIG_FADS) /* The FADS series are a mess */
-# if defined(CONFIG_MPC860T) || defined(CONFIG_MPC860) || defined(CONFIG_MPC821)
+# if defined(CONFIG_MPC86x || defined(CONFIG_MPC821)
# define CONFIG_PCMCIA_SLOT_A
# else
# define CONFIG_PCMCIA_SLOT_B
diff --git a/include/version.h b/include/version.h
index fb7411e..e3ce8be 100644
--- a/include/version.h
+++ b/include/version.h
@@ -24,6 +24,6 @@
#ifndef __VERSION_H__
#define __VERSION_H__
-#define U_BOOT_VERSION "U-Boot 0.4.4"
+#define U_BOOT_VERSION "U-Boot 0.4.5"
#endif /* __VERSION_H__ */