arm: Remove nhk8815 boards and nomadik arch

These boards have not been converted to generic board by the deadline.
Remove them.

Signed-off-by: Simon Glass <sjg@chromium.org>

2 files changed, 0 insertions, 210 deletions

diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h
deleted file mode 100644
index dd70adc..0000000
--- a/include/configs/nhk8815.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * (C) Copyright 2005
- * STMicroelectronics.
- * Configuration settings for the "Nomadik Hardware Kit" NHK-8815,
- * the evaluation board for the Nomadik 8815 System on Chip.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <nomadik.h>
-
-#define CONFIG_NOMADIK_8815	/* cpu variant */
-
-#define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */
-
-/* commands */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_SYS_NO_FLASH
-/* There is NAND storage */
-#define CONFIG_NAND_NOMADIK
-#define CONFIG_CMD_JFFS2
-
-/* user interface */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
-					+ sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_LOAD_ADDR	0x800000	/* default load address */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/* boot config */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_BOOTDELAY	1
-#define CONFIG_BOOTARGS	"root=/dev/ram0 console=ttyAMA1,115200n8 init=linuxrc"
-#define CONFIG_BOOTCOMMAND	"fsload 0x100000 kernel.uimg;" \
-				" fsload 0x800000 initrd.gz.uimg;" \
-				" bootm 0x100000 0x800000"
-
-/* memory-related information */
-#define CONFIG_NR_DRAM_BANKS	2
-#define PHYS_SDRAM_1		0x00000000	/* DDR-SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x04000000	/* 64 MB */
-#define PHYS_SDRAM_2		0x08000000	/* SDR-SDRAM BANK #2*/
-#define PHYS_SDRAM_2_SIZE	0x04000000	/* 64 MB */
-#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
-#define CONFIG_SYS_SDRAM_SIZE	(PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)
-/* The IPL loads us at 0, tell so to u-boot. Put stack pointer 1M into RAM */
-#define CONFIG_SYS_TEXT_BASE    0x00000000
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + (1<<20))
-
-#define CONFIG_SYS_MEMTEST_START	0x00000000
-#define CONFIG_SYS_MEMTEST_END		0x0FFFFFFF
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 256 * 1024)
-
-#define CONFIG_BOARD_LATE_INIT	/* call board_late_init during start up */
-
-/* timing informazion */
-#define CONFIG_SYS_TIMERBASE	0x101E2000
-
-/* serial port (PL011) configuration */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-#define CFG_SERIAL0		0x101FD000
-#define CFG_SERIAL1		0x101FB000
-
-#define CONFIG_PL01x_PORTS	{ (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 }
-#define CONFIG_PL011_CLOCK	48000000
-
-/* i2c, for the port extenders (uses gpio.c in board directory) */
-#ifndef __ASSEMBLY__
-#include <asm/arch/gpio.h>
-#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
-#define	CONFIG_SYS_I2C_SOFT	1	/* I2C bit-banged	*/
-#define I2C_SOFT_DEFS
-#define CONFIG_SYS_I2C_SOFT_SPEED	400000
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
-#define __SDA			63
-#define __SCL			62
-#define I2C_SDA(x)		nmk_gpio_set(__SDA, x)
-#define I2C_SCL(x)		nmk_gpio_set(__SCL, x)
-#define I2C_READ		(nmk_gpio_get(__SDA)!=0)
-#define I2C_ACTIVE		nmk_gpio_dir(__SDA, 1)
-#define I2C_TRISTATE		nmk_gpio_dir(__SDA, 0)
-#define I2C_DELAY     (udelay(2))
-#endif /* __ASSEMBLY__ */
-
-/* Ethernet */
-#define PCI_MEMORY_VADDR	0xe8000000
-#define PCI_IO_VADDR		0xee000000
-#define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
-#define __mem_isa(a)		((a) + PCI_MEMORY_VADDR)
-
-#define CONFIG_SMC91111	/* Using SMC91c111*/
-#define CONFIG_SMC91111_BASE	0x34000300
-#undef  CONFIG_SMC91111_EXT_PHY	/* Internal PHY */
-#define CONFIG_SMC_USE_32_BIT
-#define CONFIG_BOOTFILE		"uImage"
-
-#define CONFIG_IP_DEFRAG	/* Allows faster download, TFTP and NFS */
-#define CONFIG_TFTP_BLOCKSIZE	4096
-#define CONFIG_NFS_READ_SIZE	4096
-
-/* Storage information: onenand and nand */
-#define CONFIG_CMD_ONENAND
-#define CONFIG_MTD_ONENAND_VERIFY_WRITE
-#define CONFIG_SYS_ONENAND_BASE		0x30000000
-
-#define CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x40000000 /* SMPS0n */
-
-/*
- * Filesystem information
- *
- * Since U-Boot has been loaded to RAM by vendor code, we could use
- * either or both OneNand and Nand. However, we need to know where the
- * filesystem lives. Comments below report vendor-selected partitions
- */
-#ifdef CONFIG_BOOT_ONENAND
-   /* Partition				Size	Start
-    * XloaderTOC + X-Loader		256KB	0x00000000
-    * Memory init function		256KB	0x00040000
-    * U-Boot + env			2MB	0x00080000
-    * Sysimage (kernel + ramdisk)	4MB	0x00280000
-    * JFFS2 Root filesystem		22MB	0x00680000
-    * JFFS2 User Data			227.5MB	0x01C80000
-    */
-#   define CONFIG_JFFS2_DEV		"onenand0"
-#   define CONFIG_JFFS2_PART_SIZE	0x01600000
-#   define CONFIG_JFFS2_PART_OFFSET	0x00680000
-#   define CONFIG_ENV_IS_IN_ONENAND
-#   define CONFIG_ENV_SIZE		0x20000 /* 128 Kb - one sector */
-#   define CONFIG_ENV_ADDR		(0x00280000 - CONFIG_ENV_SIZE)
-
-#else /*  BOOT_NAND */
-   /* Partition				Size	Start
-    * XloaderTOC + X-Loader		256KB	0x00000000
-    * Memory init function		256KB	0x00040000
-    * U-Boot + env			2MB	0x00080000
-    * Kernel Image			3MB	0x00280000
-    * JFFS2 Root filesystem		22MB	0x00580000
-    * JFFS2 User Data			100.5MB	0x01b80000
-    */
-#   define CONFIG_JFFS2_DEV		"nand0"
-#   define CONFIG_JFFS2_NAND		1 /* For the jffs2 support*/
-#   define CONFIG_JFFS2_PART_SIZE	0x01600000
-#   define CONFIG_JFFS2_PART_OFFSET	0x00580000
-#   define CONFIG_ENV_IS_IN_NAND
-#   define CONFIG_ENV_SIZE		0x20000 /* 128 Kb - one sector */
-#   define CONFIG_ENV_OFFSET		(0x00280000 - CONFIG_ENV_SIZE)
-
-#endif /* CONFIG_BOOT_ONENAND */
-
-/* this is needed to make hello_world.c and other stuff happy */
-#define CONFIG_SYS_MAX_FLASH_SECT	512
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-
-#endif /* __CONFIG_H */
diff --git a/include/nomadik.h b/include/nomadik.h
deleted file mode 100644
index ea65b2d..0000000
--- a/include/nomadik.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Collection of constants used to access Nomadik registers */
-
-#ifndef __NOMADIK_H__
-#define __NOMADIK_H__
-
-/* Base addresses of our peripherals */
-#define NOMADIK_CLCDC_BASE	0x10120000	/* CLCD Controller */
-#define NOMADIK_SRC_BASE	0x101E0000	/* System and Reset Cnt */
-#define NOMADIK_PMU_BASE	0x101E9000	/* Power Management Unit */
-#define NOMADIK_MPMC_BASE	0x10110000	/* SDRAM Controller */
-#define NOMADIK_FSMC_BASE	0x10100000	/* FSMC Controller */
-#define NOMADIK_1NAND_BASE	0x30000000
-#define NOMADIK_GPIO0_BASE	0x101E4000
-#define NOMADIK_GPIO1_BASE	0x101E5000
-#define NOMADIK_GPIO2_BASE	0x101E6000
-#define NOMADIK_GPIO3_BASE	0x101E7000
-#define NOMADIK_CPLD_BASE	0x36000000
-#define NOMADIK_UART0_BASE	0x101FD000
-#define NOMADIK_UART1_BASE	0x101FB000
-#define NOMADIK_UART2_BASE	0x101F2000
-
-#define NOMADIK_I2C1_BASE	0x101F7000	/* I2C1 interface */
-#define NOMADIK_I2C0_BASE	0x101F8000	/* I2C0 interface */
-
-#define NOMADIK_RTC_BASE	0x101E8000
-#define NOMADIK_ETH0_BASE	0x36800300
-#define NOMADIK_CPLD_UART_BASE	0x36480000
-
-/* Chip select registers ("Flexible Static Memory Controller") */
-
-#define REG_FSMC_BCR0	(NOMADIK_FSMC_BASE + 0x00)
-#define REG_FSMC_BTR0	(NOMADIK_FSMC_BASE + 0x04)
-#define REG_FSMC_BCR1	(NOMADIK_FSMC_BASE + 0x08)
-#define REG_FSMC_BTR1	(NOMADIK_FSMC_BASE + 0x0c)
-#define REG_FSMC_PCR0	(NOMADIK_FSMC_BASE + 0x40)
-#define REG_FSMC_PMEM0	(NOMADIK_FSMC_BASE + 0x48)
-#define REG_FSMC_PATT0	(NOMADIK_FSMC_BASE + 0x4c)
-#define REG_FSMC_ECCR0	(NOMADIK_FSMC_BASE + 0x54)
-
-#endif /* __NOMADIK_H__ */