ENGR00112273 BBG2: MMC boot support.

BBG2: MMC boot support.

Signed-off-by: Terry Lv <r65388@freescale.com>

1 files changed, 291 insertions, 0 deletions

diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
new file mode 100644
index 0000000..4b9bde9
--- /dev/null
+++ b/include/linux/mmc/mmc.h
@@ -0,0 +1,291 @@
+/* (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * Header for MultiMediaCard (MMC)
+ *
+ * Copyright 2002 Hewlett-Packard Company
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Many thanks to Alessandro Rubini and Jonathan Corbet!
+ *
+ * Based strongly on code by:
+ *
+ * Author: Yong-iL Joh <tolkien@mizi.com>
+ * Date  : $Date: 2002/06/18 12:37:30 $
+ *
+ * Author:  Andrew Christian
+ *          15 May 2002
+ */
+
+#ifndef MMC_MMC_H
+#define MMC_MMC_H
+
+/* Standard MMC commands (4.1)           type  argument     response */
+   /* class 1 */
+#define MMC_GO_IDLE_STATE         0   /* bc                          */
+#define MMC_SEND_OP_COND          1   /* bcr  [31:0] OCR         R3  */
+#define MMC_ALL_SEND_CID          2   /* bcr                     R2  */
+#define MMC_SET_RELATIVE_ADDR     3   /* ac   [31:16] RCA        R1  */
+#define MMC_SET_DSR               4   /* bc   [31:16] RCA            */
+#define MMC_SWITCH                6   /* ac   [31:0] See below   R1b */
+#define MMC_SELECT_CARD           7   /* ac   [31:16] RCA        R1  */
+#define MMC_SEND_EXT_CSD          8   /* adtc                    R1  */
+#define MMC_SEND_CSD              9   /* ac   [31:16] RCA        R2  */
+#define MMC_SEND_CID             10   /* ac   [31:16] RCA        R2  */
+#define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
+#define MMC_STOP_TRANSMISSION    12   /* ac                      R1b */
+#define MMC_SEND_STATUS          13   /* ac   [31:16] RCA        R1  */
+#define MMC_GO_INACTIVE_STATE    15   /* ac   [31:16] RCA            */
+#define MMC_SPI_READ_OCR         58   /* spi                  spi_R3 */
+#define MMC_SPI_CRC_ON_OFF       59   /* spi  [0:0] flag      spi_R1 */
+
+  /* class 2 */
+#define MMC_SET_BLOCKLEN         16   /* ac   [31:0] block len   R1  */
+#define MMC_READ_SINGLE_BLOCK    17   /* adtc [31:0] data addr   R1  */
+#define MMC_READ_MULTIPLE_BLOCK  18   /* adtc [31:0] data addr   R1  */
+
+  /* class 3 */
+#define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1  */
+
+  /* class 4 */
+#define MMC_SET_BLOCK_COUNT      23   /* adtc [31:0] data addr   R1  */
+#define MMC_WRITE_BLOCK          24   /* adtc [31:0] data addr   R1  */
+#define MMC_WRITE_MULTIPLE_BLOCK 25   /* adtc                    R1  */
+#define MMC_PROGRAM_CID          26   /* adtc                    R1  */
+#define MMC_PROGRAM_CSD          27   /* adtc                    R1  */
+
+  /* class 6 */
+#define MMC_SET_WRITE_PROT       28   /* ac   [31:0] data addr   R1b */
+#define MMC_CLR_WRITE_PROT       29   /* ac   [31:0] data addr   R1b */
+#define MMC_SEND_WRITE_PROT      30   /* adtc [31:0] wpdata addr R1  */
+
+  /* class 5 */
+#define MMC_ERASE_GROUP_START    35   /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE_GROUP_END      36   /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE                38   /* ac                      R1b */
+
+  /* class 9 */
+#define MMC_FAST_IO              39   /* ac   <Complex>          R4  */
+#define MMC_GO_IRQ_STATE         40   /* bcr                     R5  */
+
+  /* class 7 */
+#define MMC_LOCK_UNLOCK          42   /* adtc                    R1b */
+
+  /* class 8 */
+#define MMC_APP_CMD              55   /* ac   [31:16] RCA        R1  */
+#define MMC_GEN_CMD              56   /* adtc [0] RD/WR          R1  */
+
+/*
+ * MMC_SWITCH argument format:
+ *
+ *	[31:26] Always 0
+ *	[25:24] Access Mode
+ *	[23:16] Location of target Byte in EXT_CSD
+ *	[15:08] Value Byte
+ *	[07:03] Always 0
+ *	[02:00] Command Set
+ */
+
+#define MMC_BUS_WIDTH_1		0
+#define MMC_BUS_WIDTH_4		2
+#define MMC_BUS_WIDTH_8		3
+
+/*
+  MMC status in R1, for native mode (SPI bits are different)
+  Type
+	e : error bit
+	s : status bit
+	r : detected and set for the actual command response
+	x : detected and set during command execution. the host must poll
+		the card by sending status command in order to read these bits.
+  Clear condition
+	a : according to the card state
+	b : always related to the previous command. Reception of
+		a valid command will clear it (with a delay of one command)
+	c : clear by read
+ */
+
+#define R1_OUT_OF_RANGE		(1 << 31)	/* er, c */
+#define R1_ADDRESS_ERROR	(1 << 30)	/* erx, c */
+#define R1_BLOCK_LEN_ERROR	(1 << 29)	/* er, c */
+#define R1_ERASE_SEQ_ERROR      (1 << 28)	/* er, c */
+#define R1_ERASE_PARAM		(1 << 27)	/* ex, c */
+#define R1_WP_VIOLATION		(1 << 26)	/* erx, c */
+#define R1_CARD_IS_LOCKED	(1 << 25)	/* sx, a */
+#define R1_LOCK_UNLOCK_FAILED	(1 << 24)	/* erx, c */
+#define R1_COM_CRC_ERROR	(1 << 23)	/* er, b */
+#define R1_ILLEGAL_COMMAND	(1 << 22)	/* er, b */
+#define R1_CARD_ECC_FAILED	(1 << 21)	/* ex, c */
+#define R1_CC_ERROR		(1 << 20)	/* erx, c */
+#define R1_ERROR		(1 << 19)	/* erx, c */
+#define R1_UNDERRUN		(1 << 18)	/* ex, c */
+#define R1_OVERRUN		(1 << 17)	/* ex, c */
+#define R1_CID_CSD_OVERWRITE	(1 << 16)	/* erx, c, CID/CSD overwrite */
+#define R1_WP_ERASE_SKIP	(1 << 15)	/* sx, c */
+#define R1_CARD_ECC_DISABLED	(1 << 14)	/* sx, a */
+#define R1_ERASE_RESET		(1 << 13)	/* sr, c */
+#define R1_STATUS(x)            (x & 0xFFFFE000)
+#define R1_CURRENT_STATE(x)	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
+#define R1_READY_FOR_DATA	(1 << 8)	/* sx, a */
+#define R1_APP_CMD		(1 << 5)	/* sr, c */
+
+/*
+ * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
+ * R1 is the low order byte; R2 is the next highest byte, when present.
+ */
+#define R1_SPI_IDLE		(1 << 0)
+#define R1_SPI_ERASE_RESET	(1 << 1)
+#define R1_SPI_ILLEGAL_COMMAND	(1 << 2)
+#define R1_SPI_COM_CRC		(1 << 3)
+#define R1_SPI_ERASE_SEQ	(1 << 4)
+#define R1_SPI_ADDRESS		(1 << 5)
+#define R1_SPI_PARAMETER	(1 << 6)
+/* R1 bit 7 is always zero */
+#define R2_SPI_CARD_LOCKED	(1 << 8)
+#define R2_SPI_WP_ERASE_SKIP	(1 << 9)	/* or lock/unlock fail */
+#define R2_SPI_LOCK_UNLOCK_FAIL	R2_SPI_WP_ERASE_SKIP
+#define R2_SPI_ERROR		(1 << 10)
+#define R2_SPI_CC_ERROR		(1 << 11)
+#define R2_SPI_CARD_ECC_ERROR	(1 << 12)
+#define R2_SPI_WP_VIOLATION	(1 << 13)
+#define R2_SPI_ERASE_PARAM	(1 << 14)
+#define R2_SPI_OUT_OF_RANGE	(1 << 15)	/* or CSD overwrite */
+#define R2_SPI_CSD_OVERWRITE	R2_SPI_OUT_OF_RANGE
+
+/* These are unpacked versions of the actual responses */
+
+struct _mmc_csd {
+	u8  csd_structure;
+	u8  spec_vers;
+	u8  taac;
+	u8  nsac;
+	u8  tran_speed;
+	u16 ccc;
+	u8  read_bl_len;
+	u8  read_bl_partial;
+	u8  write_blk_misalign;
+	u8  read_blk_misalign;
+	u8  dsr_imp;
+	u16 c_size;
+	u8  vdd_r_curr_min;
+	u8  vdd_r_curr_max;
+	u8  vdd_w_curr_min;
+	u8  vdd_w_curr_max;
+	u8  c_size_mult;
+	union {
+		struct { /* MMC system specification version 3.1 */
+			u8  erase_grp_size;
+			u8  erase_grp_mult;
+		} v31;
+		struct { /* MMC system specification version 2.2 */
+			u8  sector_size;
+			u8  erase_grp_size;
+		} v22;
+	} erase;
+	u8  wp_grp_size;
+	u8  wp_grp_enable;
+	u8  default_ecc;
+	u8  r2w_factor;
+	u8  write_bl_len;
+	u8  write_bl_partial;
+	u8  file_format_grp;
+	u8  copy;
+	u8  perm_write_protect;
+	u8  tmp_write_protect;
+	u8  file_format;
+	u8  ecc;
+};
+
+/*
+ * OCR bits are mostly in host.h
+ */
+#define MMC_CARD_BUSY	0x80000000	/* Card Power up status bit */
+
+/*
+ * Card Command Classes (CCC)
+ */
+#define CCC_BASIC		(1<<0)	/* (0) Basic protocol functions */
+					/* (CMD0,1,2,3,4,7,9,10,12,13,15) */
+					/* (and for SPI, CMD58,59) */
+#define CCC_STREAM_READ		(1<<1)	/* (1) Stream read commands */
+					/* (CMD11) */
+#define CCC_BLOCK_READ		(1<<2)	/* (2) Block read commands */
+					/* (CMD16,17,18) */
+#define CCC_STREAM_WRITE	(1<<3)	/* (3) Stream write commands */
+					/* (CMD20) */
+#define CCC_BLOCK_WRITE		(1<<4)	/* (4) Block write commands */
+					/* (CMD16,24,25,26,27) */
+#define CCC_ERASE		(1<<5)	/* (5) Ability to erase blocks */
+					/* (CMD32,33,34,35,36,37,38,39) */
+#define CCC_WRITE_PROT		(1<<6)	/* (6) Able to write protect blocks */
+					/* (CMD28,29,30) */
+#define CCC_LOCK_CARD		(1<<7)	/* (7) Able to lock down card */
+					/* (CMD16,CMD42) */
+#define CCC_APP_SPEC		(1<<8)	/* (8) Application specific */
+					/* (CMD55,56,57,ACMD*) */
+#define CCC_IO_MODE		(1<<9)	/* (9) I/O mode */
+					/* (CMD5,39,40,52,53) */
+#define CCC_SWITCH		(1<<10)	/* (10) High speed switch */
+					/* (CMD6,34,35,36,37,50) */
+					/* (11) Reserved */
+					/* (CMD?) */
+
+/*
+ * CSD field definitions
+ */
+
+#define CSD_STRUCT_VER_1_0  0  /* Valid for system specification 1.0 - 1.2 */
+#define CSD_STRUCT_VER_1_1  1  /* Valid for system specification 1.4 - 2.2 */
+/* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */
+#define CSD_STRUCT_VER_1_2  2
+/* Version is coded in CSD_STRUCTURE in EXT_CSD */
+#define CSD_STRUCT_EXT_CSD  3
+
+#define CSD_SPEC_VER_0 0  /* Implements system specification 1.0 - 1.2 */
+#define CSD_SPEC_VER_1 1  /* Implements system specification 1.4 */
+#define CSD_SPEC_VER_2 2  /* Implements system specification 2.0 - 2.2 */
+#define CSD_SPEC_VER_3 3  /* Implements system specification 3.1 - 3.2 - 3.31 */
+#define CSD_SPEC_VER_4 4  /* Implements system specification 4.0 - 4.1 */
+
+/*
+ * EXT_CSD fields
+ */
+
+#define EXT_CSD_BUS_WIDTH	183	/* R/W */
+#define EXT_CSD_HS_TIMING	185	/* R/W */
+#define EXT_CSD_CARD_TYPE	196	/* RO */
+#define EXT_CSD_REV		192	/* RO */
+#define EXT_CSD_SEC_CNT		212	/* RO, 4 bytes */
+
+/*
+ * EXT_CSD field definitions
+ */
+
+#define EXT_CSD_CMD_SET_NORMAL		(1<<0)
+#define EXT_CSD_CMD_SET_SECURE		(1<<1)
+#define EXT_CSD_CMD_SET_CPSECURE	(1<<2)
+
+#define EXT_CSD_CARD_TYPE_26	(1<<0)	/* Card can run at 26MHz */
+#define EXT_CSD_CARD_TYPE_52	(1<<1)	/* Card can run at 52MHz */
+
+#define EXT_CSD_BUS_WIDTH_1	0	/* Card is in 1 bit mode */
+#define EXT_CSD_BUS_WIDTH_4	1	/* Card is in 4 bit mode */
+#define EXT_CSD_BUS_WIDTH_8	2	/* Card is in 8 bit mode */
+
+/*
+ * MMC_SWITCH access modes
+ */
+
+#define MMC_SWITCH_MODE_CMD_SET	  0x00  /* Change the command set */
+#define MMC_SWITCH_MODE_SET_BITS  0x01  /* Set bits which are 1 in value */
+#define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */
+#define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */
+
+#endif  /* MMC_MMC_PROTOCOL_H */
+