Merge branch 'master' of git://www.denx.de/git/u-boot-imx

7 files changed, 276 insertions, 54 deletions

diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h
new file mode 100644
index 0000000..5861eeb
--- /dev/null
+++ b/include/configs/bk4r1.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2016 3ADEV <http://3adev.com>
+ * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
+ *
+ * Configuration settings for the phytec PCM-052 SoM-based BK4R1.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/* Define the BK4r1-specific env commands */
+#define PCM052_EXTRA_ENV_SETTINGS \
+	"set_gpio103=mw 0x400ff0c4 0x0080; mw 0x4004819C 0x000011bf\0" \
+	"set_gpio122=mw 0x400481e8 0x0282; mw 0x400ff0c4 0x04000000\0"
+
+/* BK4r1 boot command sets GPIO103/PTC30 to force USB hub out of reset*/
+#define PCM052_BOOTCOMMAND "run set_gpio103; sf probe; "
+
+/* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */
+#define PCM052_NET_INIT "run set_gpio122; "
+
+/* add NOR to MTD env */
+#define MTDIDS_DEFAULT			"nand0=NAND,nor0=NOR"
+#define MTDPARTS_DEFAULT		"mtdparts=NAND:640k(bootloader)"\
+					",128k(env1)"\
+					",128k(env2)"\
+					",128k(dtb)"\
+					",6144k(kernel)"\
+					",-(root);"\
+					"NOR:-(nor)"
+
+/* now include standard PCM052 config */
+
+#include "configs/pcm052.h"
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 16ae952..55d8fcf 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -59,9 +59,7 @@
 #undef CONFIG_BOOTM_RTEMS
 
 /* I2C configs */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_SPEED		100000
 
 #define CONFIG_IPADDR			192.168.10.2
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index 52f096e..c77fef6 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -15,6 +15,7 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/imx-common/gpio.h>
 
+#define BX50V3_BOOTARGS_EXTRA
 #if defined(CONFIG_TARGET_GE_B450V3)
 #define CONFIG_BOARD_NAME	"General Electric B450v3"
 #define CONFIG_DEFAULT_FDT_FILE	"/boot/imx6q-b450v3.dtb"
@@ -24,6 +25,9 @@
 #elif defined(CONFIG_TARGET_GE_B850V3)
 #define CONFIG_BOARD_NAME	"General Electric B850v3"
 #define CONFIG_DEFAULT_FDT_FILE	"/boot/imx6q-b850v3.dtb"
+#undef BX50V3_BOOTARGS_EXTRA
+#define BX50V3_BOOTARGS_EXTRA	"video=DP-1:1024x768@60 " \
+				"video=HDMI-A-1:1024x768@60 "
 #else
 #define CONFIG_BOARD_NAME	"General Electric BA16 Generic"
 #define CONFIG_DEFAULT_FDT_FILE	"/boot/imx6q-ba16.dtb"
@@ -166,7 +170,8 @@
 			"echo 'U-Boot upgraded. Please reset'; " \
 		"fi\0" \
 	"setargs=setenv bootargs console=${console},${baudrate} " \
-		"root=/dev/${rootdev} rw rootwait cma=128M\0" \
+		"root=/dev/${rootdev} rw rootwait cma=128M " \
+		BX50V3_BOOTARGS_EXTRA "\0" \
 	"loadbootscript=" \
 		"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h
new file mode 100644
index 0000000..ccce954
--- /dev/null
+++ b/include/configs/mx6ullevk.h
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef __MX6ULLEVK_CONFIG_H
+#define __MX6ULLEVK_CONFIG_H
+
+
+#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
+#include "mx6_common.h"
+#include <asm/imx-common/gpio.h>
+
+#ifdef CONFIG_SECURE_BOOT
+#ifndef CONFIG_CSF_SIZE
+#define CONFIG_CSF_SIZE 0x4000
+#endif
+#endif
+
+#define PHYS_SDRAM_SIZE	SZ_512M
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE		UART1_BASE
+
+/* MMC Configs */
+#ifdef CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
+
+/* NAND pin conflicts with usdhc2 */
+#ifdef CONFIG_SYS_USE_NAND
+#define CONFIG_SYS_FSL_USDHC_NUM	1
+#else
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+#endif
+#endif
+
+/* I2C configs */
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_SPEED		100000
+#endif
+
+#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"script=boot.scr\0" \
+	"image=zImage\0" \
+	"console=ttymxc0\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"fdt_file=imx6ull-14x14-evk.dtb\0" \
+	"fdt_addr=0x83000000\0" \
+	"boot_fdt=try\0" \
+	"ip_dyn=yes\0" \
+	"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
+	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcautodetect=yes\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=${mmcroot}\0" \
+	"loadbootscript=" \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs " \
+	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+		"netboot=echo Booting from net ...; " \
+		"run netargs; " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${image}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	   "mmc dev ${mmcdev};" \
+	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "if run loadbootscript; then " \
+			   "run bootscript; " \
+		   "else " \
+			   "if run loadimage; then " \
+				   "run mmcboot; " \
+			   "else run netboot; " \
+			   "fi; " \
+		   "fi; " \
+	   "else run netboot; fi"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x8000000)
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_STACKSIZE		SZ_128K
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SYS_MMC_ENV_DEV		1	/* USDHC2 */
+#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
+#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_SIZE			SZ_8K
+#define CONFIG_ENV_OFFSET		(12 * SZ_64K)
+
+#define CONFIG_CMD_BMODE
+
+#define CONFIG_IMX_THERMAL
+
+#define CONFIG_IOMUX_LPSR
+
+#define CONFIG_SOFT_SPI
+
+#endif
diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
index a70c988..0372e43 100644
--- a/include/configs/pcm052.h
+++ b/include/configs/pcm052.h
@@ -52,15 +52,20 @@
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
+
+#ifndef MTDIDS_DEFAULT
 #define MTDIDS_DEFAULT			"nand0=NAND"
-#define MTDPARTS_DEFAULT		"mtdparts=NAND:256k(spare)"\
-					",384k(bootloader)"\
+#endif
+
+#ifndef MTDPARTS_DEFAULT
+#define MTDPARTS_DEFAULT		"mtdparts=NAND:640k(bootloader)"\
 					",128k(env1)"\
 					",128k(env2)"\
 					",128k(dtb)"\
 					",6144k(kernel)"\
-					",65536k(ramdisk)"\
-					",450944k(root)"
+					",-(root)"
+#endif
+
 #endif
 
 #define CONFIG_MMC
@@ -87,7 +92,6 @@
 /* QSPI Configs*/
 
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH
 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
 #define FSL_QSPI_FLASH_NUM		2
 #define CONFIG_SYS_FSL_QSPI_LE
@@ -117,16 +121,38 @@
 #define CONFIG_SYS_TEXT_BASE		0x3f408000
 #define CONFIG_BOARD_SIZE_LIMIT		524288
 
-#define CONFIG_BOOTCOMMAND              "run bootcmd_sd"
+/* if no target-specific extra environment settings were defined by the
+   target, define an empty one */
+#ifndef PCM052_EXTRA_ENV_SETTINGS
+#define PCM052_EXTRA_ENV_SETTINGS
+#endif
+
+/* if no target-specific boot command was defined by the target,
+   define an empty one */
+#ifndef PCM052_BOOTCOMMAND
+#define PCM052_BOOTCOMMAND
+#endif
+
+/* if no target-specific extra environment settings were defined by the
+   target, define an empty one */
+#ifndef PCM052_NET_INIT
+#define PCM052_NET_INIT
+#endif
+
+/* boot command, including the target-defined one if any */
+#define CONFIG_BOOTCOMMAND	PCM052_BOOTCOMMAND "run bootcmd_nand"
+
+/* Extra env settings (including the target-defined ones if any) */
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	PCM052_EXTRA_ENV_SETTINGS \
+	"autoload=no\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
-	"blimg_file=u-boot.imx\0" \
-	"blsec_addr=0x81000000\0" \
-	"blimg_addr=0x81000400\0" \
+	"blimg_file=u-boot.vyb\0" \
+	"blimg_addr=0x81000000\0" \
 	"kernel_file=zImage\0" \
 	"kernel_addr=0x82000000\0" \
-	"fdt_file=vf610-pcm052.dtb\0" \
+	"fdt_file=zImage.dtb\0" \
 	"fdt_addr=0x81000000\0" \
 	"ram_file=uRamdisk\0" \
 	"ram_addr=0x83000000\0" \
@@ -137,14 +163,15 @@
 	"tftptimeout=1000\0" \
 	"tftptimeoutcountmax=1000000\0" \
 	"mtdparts=" MTDPARTS_DEFAULT "\0" \
-	"bootargs_base=setenv bootargs rw mem=256M " \
+	"bootargs_base=setenv bootargs rw " \
+		" mem=" __stringify(CONFIG_PCM052_DDR_SIZE) "M " \
 		"console=ttyLP1,115200n8\0" \
 	"bootargs_sd=setenv bootargs ${bootargs} " \
 		"root=/dev/mmcblk0p2 rootwait\0" \
 	"bootargs_net=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp " \
 		"nfsroot=${serverip}:${nfs_root},v3,tcp\0" \
 	"bootargs_nand=setenv bootargs ${bootargs} " \
-		"ubi.mtd=6 rootfstype=ubifs root=ubi0:rootfs\0" \
+		"ubi.mtd=5 rootfstype=ubifs root=ubi0:rootfs\0" \
 	"bootargs_ram=setenv bootargs ${bootargs} " \
 		"root=/dev/ram rw initrd=${ram_addr}\0" \
 	"bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
@@ -163,14 +190,14 @@
 	"bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \
 		"nand read ${fdt_addr} dtb; " \
 		"nand read ${kernel_addr} kernel; " \
-		"nand read ${ram_addr} ramdisk; " \
+		"nand read ${ram_addr} root; " \
 		"bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \
-	"update_bootloader_from_tftp=mtdparts default; " \
-		"nand read ${blsec_addr} bootloader; " \
-		"mw.b ${blimg_addr} 0xff 0x5FC00; " \
-		"if tftp ${blimg_addr} ${tftpdir}${blimg_file}; then " \
+	"update_bootloader_from_tftp=" PCM052_NET_INIT \
+		"if tftp ${blimg_addr} "\
+		"${tftpdir}${blimg_file}; then " \
+		"mtdparts default; " \
 		"nand erase.part bootloader; " \
-		"nand write ${blsec_addr} bootloader ${filesize}; fi\0" \
+		"nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
 	"update_kernel_from_sd=if fatload mmc 0:2 ${kernel_addr} " \
 		"${kernel_file}; " \
 		"then mtdparts default; " \
@@ -179,7 +206,8 @@
 		"if fatload mmc 0:2 ${fdt_addr} ${fdt_file}; then " \
 		"nand erase.part dtb; " \
 		"nand write ${fdt_addr} dtb ${filesize}; fi\0" \
-	"update_kernel_from_tftp=if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \
+	"update_kernel_from_tftp=" PCM052_NET_INIT \
+		"if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \
 		"then setenv fdtsize ${filesize}; " \
 		"if tftp ${kernel_addr} ${tftpdir}${kernel_file}; then " \
 		"mtdparts default; " \
@@ -187,16 +215,18 @@
 		"nand write ${fdt_addr} dtb ${fdtsize}; " \
 		"nand erase.part kernel; " \
 		"nand write ${kernel_addr} kernel ${filesize}; fi; fi\0" \
-	"update_rootfs_from_tftp=if tftp ${sys_addr} ${tftpdir}${filesys}; " \
+	"update_rootfs_from_tftp=" PCM052_NET_INIT \
+		"if tftp ${sys_addr} ${tftpdir}${filesys}; " \
 		"then mtdparts default; " \
 		"nand erase.part root; " \
 		"ubi part root; " \
 		"ubi create rootfs; " \
 		"ubi write ${sys_addr} rootfs ${filesize}; fi\0" \
-	"update_ramdisk_from_tftp=if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
+	"update_ramdisk_from_tftp=" PCM052_NET_INIT \
+		"if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
 		"then mtdparts default; " \
-		"nand erase.part ramdisk; " \
-		"nand write ${ram_addr} ramdisk ${filesize}; fi\0"
+		"nand erase.part root; " \
+		"nand write ${ram_addr} root ${filesize}; fi\0"
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
@@ -222,7 +252,7 @@
 /* Physical memory map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			(0x80000000)
-#define PHYS_SDRAM_SIZE			(256 * 1024 * 1024)
+#define PHYS_SDRAM_SIZE			(CONFIG_PCM052_DDR_SIZE * 1024 * 1024)
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 85501bc..d877336 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -39,7 +39,7 @@
 #define CONFIG_SYS_MEMTEST_END \
 	(CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
 
-#define CONFIG_SYS_BOOTMAPSZ		0x6C000000
+#define CONFIG_SYS_BOOTMAPSZ		0x10000000
 
 /* Serial console */
 #define CONFIG_MXC_UART
@@ -56,9 +56,11 @@
 
 /* *** Command definition *** */
 #define CONFIG_CMD_BMODE
+#define CONFIG_CMD_PART
 
 /* Filesystems / image support */
 #define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
 
 /* MMC */
 #define CONFIG_SYS_FSL_USDHC_NUM	3
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 69d0fd5..999ee6d 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -116,32 +116,6 @@
 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 			"fi; "	\
 		"fi\0" \
-	"videoargs=" \
-		"setenv nextcon 0; " \
-		"if hdmidet; then " \
-			"setenv bootargs ${bootargs} " \
-				"video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
-					"if=RGB24; " \
-			"setenv fbmen fbmem=28M; " \
-			"setexpr nextcon ${nextcon} + 1; " \
-		"else " \
-			"echo - no HDMI monitor;" \
-		"fi; " \
-		"i2c dev 1; " \
-		"if i2c probe 0x10; then " \
-			"setenv bootargs ${bootargs} " \
-				"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
-					"if=RGB666,bpp=32; " \
-			"if test 0 -eq ${nextcon}; then " \
-				"setenv fbmem fbmem=10M; " \
-			"else " \
-				"setenv fbmem ${fbmem},10M; " \
-			"fi; " \
-			"setexpr nextcon ${nextcon} + 1; " \
-		"else " \
-			"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
-		"fi; " \
-		"setenv bootargs ${bootargs} ${fbmem}\0" \
 	"findfdt="\
 		"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
 			"setenv fdtfile imx6q-wandboard.dtb; fi; " \