summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
authorSergei Poselenov <sposelenov@emcraft.com>2008-05-07 15:10:49 +0200
committerWolfgang Denk <wd@denx.de>2008-05-20 23:27:49 +0200
commite18575d5f589a62e19c70d471d4b4e27cad3af56 (patch)
tree3cb32a60594e5c6cbd4be368216107ff5eb77fb9 /include/configs
parent5d108ac8f435924c624cd6aaacd44f35f5cf94c0 (diff)
downloadu-boot-imx-e18575d5f589a62e19c70d471d4b4e27cad3af56.zip
u-boot-imx-e18575d5f589a62e19c70d471d4b4e27cad3af56.tar.gz
u-boot-imx-e18575d5f589a62e19c70d471d4b4e27cad3af56.tar.bz2
socrates: changes to support FDT
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/socrates.h58
1 files changed, 25 insertions, 33 deletions
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index de8cd72..a8f81ec 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -114,11 +114,9 @@
#define CFG_DDR_CLK_CONTROL 0x03800000
#define CFG_SDRAM_SIZE 256 /* in Megs */
-#if 1
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for DDR setup*/
#define SPD_EEPROM_ADDRESS 0x50 /* DDR DIMM */
#define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */
-#endif
/*
* Flash on the Local Bus
@@ -145,7 +143,7 @@
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector */
#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
-#define CFG_MAX_FLASH_SECT 512 /* sectors per device */
+#define CFG_MAX_FLASH_SECT 256 /* sectors per device */
#undef CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
@@ -205,28 +203,8 @@
#define CFG_I2C_OFFSET 0x3000
/* I2C RTC */
-#define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */
-#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
-
-#if 0
-/* I2C EEPROM */
-/*
- * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work also).
- */
-#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */
-
-/* I2C SYSMON (LM75) */
-#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
-#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
-#define CFG_DTT_MAX_TEMP 70
-#define CFG_DTT_LOW_TEMP -30
-#define CFG_DTT_HYSTERESIS 3
-#endif
+#define CONFIG_RTC_RX8025 /* Use Epson rx8025 rtc via i2c */
+#define CFG_I2C_RTC_ADDR 0x32 /* at address 0x32 */
/* RapidIO MMU */
#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
@@ -280,6 +258,9 @@
#define CONFIG_ETHPRIME "TSEC0"
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+
/*
* Environment
*/
@@ -379,7 +360,7 @@
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootfile=/tftpboot/socrates\0" \
+ "bootfile=/tftpboot/socrates/uImage\0" \
"netdev=eth0\0" \
"consdev=ttyS0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
@@ -390,15 +371,22 @@
":$hostname:$netdev:off panic=1\0" \
"addcons=setenv bootargs $bootargs " \
"console=$consdev,$baudrate\0" \
- "flash_nfs=run nfsargs addip addcons;" \
- "bootm $kernel_addr\0" \
"flash_self=run ramargs addip addcons;" \
- "bootm $kernel_addr $ramdisk_addr\0" \
- "net_nfs=tftp $loadaddr $bootfile;" \
- "run nfsargs addip addcons;bootm\0" \
+ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
+ "flash_nfs=run nfsargs addip addcons;" \
+ "bootm ${kernel_addr} - ${fdt_addr}\0" \
+ "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
+ "tftp ${fdt_addr_r} ${fdt_file}; " \
+ "run nfsargs addip addcons;" \
+ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
+ "fdt_file=socrates/socrates.dtb\0" \
+ "fdt_addr_r=B00000\0" \
+ "fdt_addr=FC1E0000\0" \
"rootpath=/opt/eldk/ppc_85xx\0" \
- "kernel_addr=FE000000\0" \
- "ramdisk_addr=FE180000\0" \
+ "kernel_addr=FC000000\0" \
+ "kernel_addr_r=200000\0" \
+ "ramdisk_addr=FC200000\0" \
+ "ramdisk_addr_r=400000\0" \
"load=tftp 100000 /tftpboot/$hostname/u-boot.bin\0" \
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
"cp.b 100000 fffc0000 40000;" \
@@ -407,4 +395,8 @@
""
#define CONFIG_BOOTCOMMAND "run flash_self"
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */