Merge branch 'master' of /home/stefan/git/u-boot/u-boot into for-1.3.2-ver2

26 files changed, 840 insertions, 341 deletions

diff --git a/include/configs/HMI10.h b/include/configs/HMI10.h
index 02ae5d0..f8b0262 100644
--- a/include/configs/HMI10.h
+++ b/include/configs/HMI10.h
@@ -224,11 +224,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index be603ac..35e1d63 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -298,13 +298,9 @@
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8540@0"
-#define OF_SOC			"soc8540@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH		"/soc8540@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 #define CFG_64BIT_VSPRINTF	1
 #define CFG_64BIT_STRTOUL	1
@@ -424,6 +420,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -441,6 +438,7 @@
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 8dda665..d2e7237 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -309,14 +309,9 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8541@0"
-#define OF_SOC			"soc8541@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH		"/soc8541@e0000000/serial@4600"
-#define OF_PCI			"pci@e0008000"
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /*
  * I2C
@@ -422,6 +417,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -434,6 +430,7 @@ extern unsigned long get_clock_freq(void);
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 13e2a2c..545a76c 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -40,6 +40,7 @@
 #define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
 #define CONFIG_PCIE3		1	/* PCIE controler 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+#define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
@@ -251,13 +252,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8544@0"
-#define OF_SOC			"soc8544@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH		"/soc8544@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
@@ -410,6 +407,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -426,6 +424,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
@@ -475,10 +474,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_ETHADDR	00:E0:0C:02:00:FD
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR	00:E0:0C:02:01:FD
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR	00:E0:0C:02:02:FD
-#define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR	00:E0:0C:02:03:FD
 #endif
 
 #define CONFIG_IPADDR	192.168.1.251
@@ -488,8 +483,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_BOOTFILE	8544ds/uImage.uboot
 #define CONFIG_UBOOTPATH	8544ds/u-boot.bin	/* TFTP server */
 
-#define CONFIG_SERVERIP	192.168.0.1
-#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP	192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
 #define CONFIG_NETMASK	255.255.0.0
 
 #define CONFIG_LOADADDR	1000000	/*default location for tftp and bootm*/
@@ -499,65 +494,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_BAUDRATE	115200
 
-#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3)
-#define PCIE_ENV \
- "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
-	"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
- "pcieerr=md ${a}020 1; md ${a}e00 e;"		\
-	"pci d.b $b.0 7 1; pci d.w $b.0 1e 1;"	\
-	"pci d.w $b.0 56 1;"			\
-	"pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \
- "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff;"	\
-	"pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff;" \
-	"pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \
-	"pci w $b.0 130 ffffffff\0" \
- "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0"	\
- "pcie1regs=setenv a e000a; run pciereg\0"	\
- "pcie2regs=setenv a e0009; run pciereg\0"	\
- "pcie3regs=setenv a e000b; run pciereg\0"	\
- "pcie1cfg=setenv b 3; run pciecfg\0" \
- "pcie2cfg=setenv b 5; run pciecfg\0" \
- "pcie3cfg=setenv b 0; run pciecfg\0" \
- "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0"	\
- "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0"	\
- "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0"	\
- "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0"	\
- "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0"	\
- "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0"
-#else
-#define	PCIE_ENV ""
-#endif
-
-#if defined(CONFIG_PCI1)
-#define PCI_ENV \
- "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
-	"echo e;md ${a}e00 9\0"			\
- "pci1regs=setenv a e0008; run pcireg\0"	\
- "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
-	"pci d.w $b.0 56 1\0"			\
- "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
-	"pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0"		\
- "pci1err=setenv a e0008; setenv b 7; run pcierr\0"		\
- "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0"
-#else
-#define	PCI_ENV ""
-#endif
-
-#if defined(CONFIG_TSEC_ENET)
-#define ENET_ENV \
- "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \
-	"md ${a}098 2\0" \
- "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \
- "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \
- "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \
-	"echo mib;md ${a}680 31\0" \
- "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \
- "enet1regs=setenv a e0024; run enetreg\0" \
- "enet3regs=setenv a e0026; run enetreg\0"
-#else
-#define ENET_ENV ""
-#endif
-
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
  "netdev=eth0\0"						\
  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
@@ -570,29 +506,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  "consoledev=ttyS0\0"				\
  "ramdiskaddr=2000000\0"			\
  "ramdiskfile=8544ds/ramdisk.uboot\0"		\
- "dtbaddr=c00000\0"				\
- "dtbfile=8544ds/mpc8544ds.dtb\0"		\
- "bdev=sda3\0"					\
- "eoi=mw e00400b0 0\0"				\
- "iack=md e00400a0 1\0"				\
- "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
-	"md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
- "ddrregs=setenv a e0002; run ddrreg\0"		\
- "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
-	"md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0"	\
- "guregs=setenv a e00e0; run gureg\0"		\
- "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
- "ecmregs=setenv a e0001; run ecmreg\0"		\
- "lawregs=md e0000c08 4b\0" \
- "lbcregs=md e0005000 36\0" \
- "dma0regs=md e0021100 12\0" \
- "dma1regs=md e0021180 12\0" \
- "dma2regs=md e0021200 12\0" \
- "dma3regs=md e0021280 12\0" \
- PCIE_ENV	\
- PCI_ENV	\
- ENET_ENV
-
+ "fdtaddr=c00000\0"				\
+ "fdtfile=8544ds/mpc8544ds.dtb\0"		\
+ "bdev=sda3\0"
 
 #define CONFIG_NFSBOOTCOMMAND		\
  "setenv bootargs root=/dev/nfs rw "	\
@@ -600,23 +516,22 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
  "console=$consoledev,$baudrate $othbootargs;"	\
  "tftp $loadaddr $bootfile;"		\
- "tftp $dtbaddr $dtbfile;"		\
- "bootm $loadaddr - $dtbaddr"
-
+ "tftp $fdtaddr $fdtfile;"		\
+ "bootm $loadaddr - $fdtaddr"
 
 #define CONFIG_RAMBOOTCOMMAND		\
  "setenv bootargs root=/dev/ram rw "	\
  "console=$consoledev,$baudrate $othbootargs;"	\
  "tftp $ramdiskaddr $ramdiskfile;"	\
  "tftp $loadaddr $bootfile;"		\
- "tftp $dtbaddr $dtbfile;"		\
- "bootm $loadaddr $ramdiskaddr $dtbaddr"
+ "tftp $fdtaddr $fdtfile;"		\
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
 #define CONFIG_BOOTCOMMAND		\
  "setenv bootargs root=/dev/$bdev rw "	\
  "console=$consoledev,$baudrate $othbootargs;"	\
  "tftp $loadaddr $bootfile;"		\
- "tftp $dtbaddr $dtbfile;"		\
- "bootm $loadaddr - $dtbaddr"
+ "tftp $fdtaddr $fdtfile;"		\
+ "bootm $loadaddr - $fdtaddr"
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 4edc7fd..3f382e5 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -42,6 +42,7 @@
 #undef CONFIG_RIO
 #undef CONFIG_PCI2
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+#define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
@@ -333,14 +334,9 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8548@0"
-#define OF_SOC			"soc8548@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH		"/soc8548@e0000000/serial@4600"
-#define OF_PCI			"pci@e0008000"
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /*
  * I2C
@@ -483,6 +479,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -495,6 +492,7 @@ extern unsigned long get_clock_freq(void);
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
@@ -568,72 +566,6 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_BAUDRATE	115200
 
-#if defined(CONFIG_PCIE1)
-#define PCIE_ENV \
- "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
-	"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
- "pcieerr=md ${a}020 1; md ${a}e00 e; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
-	"pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;" \
-	"pci d $b.0 130 1\0" \
- "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;" \
-	"pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;"\
-	"pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0" \
- "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \
- "pcie1regs=setenv a e000a; run pciereg\0" \
- "pcie1cfg=setenv b 3; run pciecfg\0" \
- "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \
- "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0"
-#else
-#define	PCIE_ENV ""
-#endif
-
-#if defined(CONFIG_PCI1) || defined(CONFIG_PCI2)
-#define PCI_ENV \
- "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
-	"echo e;md ${a}e00 9\0" \
- "pcierr=md ${a}e00 8; pci d.b $b.0 7 1;pci d.w $b.0 1e 1;" \
-	"pci d.w $b.0 56 1\0" \
- "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
-	"pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0"
-#else
-#define	PCI_ENV ""
-#endif
-
-#if defined(CONFIG_PCI1)
-#define PCI_ENV1 \
- "pci1regs=setenv a e0008; run pcireg\0" \
- "pci1err=setenv a e0008; setenv b 0; run pcierr\0" \
- "pci1errc=setenv a e0008; setenv b 0; run pcierrc\0"
-#else
-#define	PCI_ENV1 ""
-#endif
-
-#if defined(CONFIG_PCI2)
-#define PCI_ENV2 \
- "pci2regs=setenv a e0009; run pcireg\0" \
- "pci2err=setenv a e0009; setenv b 123; run pcierr\0"	\
- "pci2errc=setenv a e0009; setenv b 123; run pcierrc\0"
-#else
-#define	PCI_ENV2 ""
-#endif
-
-#if defined(CONFIG_TSEC_ENET)
-#define ENET_ENV \
- "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \
-	"md ${a}098 2\0" \
- "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \
- "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \
- "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \
-	"echo mib;md ${a}680 31\0" \
- "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \
- "enet1regs=setenv a e0024; run enetreg\0" \
- "enet2regs=setenv a e0025; run enetreg\0" \
- "enet3regs=setenv a e0026; run enetreg\0" \
- "enet4regs=setenv a e0027; run enetreg\0"
-#else
-#define ENET_ENV ""
-#endif
-
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
  "netdev=eth0\0"						\
  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
@@ -647,28 +579,7 @@ extern unsigned long get_clock_freq(void);
  "ramdiskaddr=2000000\0"			\
  "ramdiskfile=ramdisk.uboot\0"			\
  "fdtaddr=c00000\0"				\
- "fdtfile=mpc8548cds.dtb\0"			\
- "eoi=mw e00400b0 0\0"				\
- "iack=md e00400a0 1\0"				\
- "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
-	"md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
- "ddrregs=setenv a e0002; run ddrreg\0"		\
- "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
-	"md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0"	\
- "guregs=setenv a e00e0; run gureg\0"		\
- "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
- "ecmregs=setenv a e0001; run ecmreg\0" \
- "lawregs=md e0000c08 4b\0" \
- "lbcregs=md e0005000 36\0" \
- "dma0regs=md e0021100 12\0" \
- "dma1regs=md e0021180 12\0" \
- "dma2regs=md e0021200 12\0" \
- "dma3regs=md e0021280 12\0" \
- PCIE_ENV \
- PCI_ENV \
- PCI_ENV1 \
- PCI_ENV2 \
- ENET_ENV
+ "fdtfile=mpc8548cds.dtb\0"
 
 #define CONFIG_NFSBOOTCOMMAND						\
    "setenv bootargs root=/dev/nfs rw "					\
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index c414bf0..90ef3d6 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -309,14 +309,9 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8555@0"
-#define OF_SOC			"soc8555@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH		"/soc8555@e0000000/serial@4600"
-#define OF_PCI			"pci@e0008000"
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /*
  * I2C
@@ -422,6 +417,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -434,6 +430,7 @@ extern unsigned long get_clock_freq(void);
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index a8f362f..d4e0de0 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -289,13 +289,9 @@
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8560@0"
-#define OF_SOC			"soc8560@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH		"/soc8560@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /*
  * I2C
@@ -450,6 +446,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -471,6 +468,7 @@
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x1000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 
@@ -525,6 +523,8 @@
 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
 #define CONFIG_HAS_ETH2
 #define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR  00:E0:0C:00:03:FD
 #endif
 
 #define CONFIG_IPADDR    192.168.1.253
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index b9366cc..59f490e 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -33,7 +33,11 @@
 #define CONFIG_MPC8568		1	/* MPC8568 specific */
 #define CONFIG_MPC8568MDS	1	/* MPC8568MDS board specific */
 
-#define CONFIG_PCI
+#define CONFIG_PCI		1	/* Enable PCI/PCIE */
+#define CONFIG_PCI1		1	/* PCI controller */
+#define CONFIG_PCIE1		1	/* PCIE controller */
+#define CONFIG_FSL_PCI_INIT	1	/* use common fsl pci init code */
+#define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 #define CONFIG_TSEC_ENET 		/* tsec ethernet support */
 #define CONFIG_QE			/* Enable QE */
 #define CONFIG_ENV_OVERWRITE
@@ -87,6 +91,9 @@ extern unsigned long get_clock_freq(void);
 #define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
 #define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
 
+#define CFG_PCI1_ADDR           (CFG_CCSRBAR+0x8000)
+#define CFG_PCIE1_ADDR          (CFG_CCSRBAR+0xa000)
+
 /*
  * DDR Setup
  */
@@ -290,14 +297,9 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8568@0"
-#define OF_SOC			"soc8568@e0000000"
-#define OF_QE			"qe@e0080000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH		"/soc8568@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /*
  * I2C
@@ -325,12 +327,12 @@ extern unsigned long get_clock_freq(void);
 #define CFG_PCI1_IO_PHYS	0xe2000000
 #define CFG_PCI1_IO_SIZE	0x00800000	/* 8M */
 
-#define CFG_PEX_MEM_BASE	0xa0000000
-#define CFG_PEX_MEM_PHYS	CFG_PEX_MEM_BASE
-#define CFG_PEX_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PEX_IO_BASE		0x00000000
-#define CFG_PEX_IO_PHYS		0xe2800000
-#define CFG_PEX_IO_SIZE		0x00800000	/* 8M */
+#define CFG_PCIE1_MEM_BASE	0xa0000000
+#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCIE1_IO_BASE	0x00000000
+#define CFG_PCIE1_IO_PHYS	0xe2800000
+#define CFG_PCIE1_IO_SIZE	0x00800000	/* 8M */
 
 #define CFG_SRIO_MEM_BASE	0xc0000000
 
@@ -383,6 +385,11 @@ extern unsigned long get_clock_freq(void);
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS      0x00000000
+#define CFG_PCI_MEMORY_PHYS     0x00000000
+#define CFG_PCI_MEMORY_SIZE     0x80000000
+
 #endif	/* CONFIG_PCI */
 
 #ifndef CONFIG_NET_MULTI
@@ -440,6 +447,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -452,6 +460,7 @@ extern unsigned long get_clock_freq(void);
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 1c6a9ae..ae8d9ab 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -335,7 +335,7 @@
 #else
 #define CFG_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
 #endif /* CONFIG_TQM5200_B */
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
+#define CFG_MALLOC_LEN		(1024 << 10)	/* Reserve 1024 kB for malloc()	*/
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
@@ -392,6 +392,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 #if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 7a38010..be5b4d3 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -192,11 +192,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index e8b6a80..a0c01b6 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -188,15 +188,19 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment Sector	*/
+#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
 #define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index beeca63..f51b12e 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -179,11 +179,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index d5609c1..a725e71 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -177,15 +177,19 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment Sector	*/
+#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
 #define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index e35b5b2..16dc3eb 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -183,11 +183,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index cd5212e..c4b4599 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -217,15 +217,19 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment Sector	*/
+#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
 #define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index d5838db..ac22c1e 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -186,11 +186,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index fe3a2f0..8601de1 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -189,11 +189,14 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
-
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
@@ -368,7 +371,7 @@
  */
 #define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank #0	*/
 #define SDRAM_BASE3_PRELIM	0x20000000	/* SDRAM bank #1	*/
-#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
+#define	SDRAM_MAX_SIZE		0x08000000	/* max 128 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
 #define CFG_OR_TIMING_SDRAM	0x00000A00
@@ -444,7 +447,10 @@
 #define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
+/* 10 column SDRAM */
+#define CFG_MAMR_10COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
 /*
  * Internal Definitions
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index f09d3d1..2bf4a2a 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -186,14 +186,17 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
-
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
 #define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index 039aa3a..d42ffc9 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -186,16 +186,19 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
-
 #define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment Sector	*/
+#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
 #define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index ca3c166..d7e5eeb 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -232,11 +232,14 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
-
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
 #define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index f36b729..8a3aa4b 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -42,17 +42,10 @@
 #define CONFIG_8xx_OSCLK		10000000	/*  10 MHz - PLL input clock	*/
 #define CFG_8xx_CPUCLK_MIN		15000000	/*  15 MHz - CPU minimum clock	*/
 #define CFG_8xx_CPUCLK_MAX		133000000	/* 133 MHz - CPU maximum clock	*/
-#define CONFIG_8xx_CPUCLK_DEFAULT	66000000	/*  50 MHz - CPU default clock	*/
+#define CONFIG_8xx_CPUCLK_DEFAULT	66000000	/*  66 MHz - CPU default clock	*/
 						/* (it will be used if there is no	*/
 						/* 'cpuclk' variable with valid value)	*/
 
-#define CFG_MEASURE_CPUCLK			/* Measure real cpu clock	*/
-						/* (function measure_gclk()	*/
-						/* will be called)		*/
-#ifdef CFG_MEASURE_CPUCLK
-#define CFG_8XX_XIN		10000000	/* measure_gclk() needs this	*/
-#endif
-
 #define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 
 #define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
@@ -83,9 +76,15 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM866M/uImage\0"				\
-	"kernel_addr=40080000\0"					\
-	"ramdisk_addr=40180000\0"					\
+	"bootfile=/tftpboot/TQM885D/uImage\0"				\
+	"fdt_addr=400C0000\0"						\
+	"kernel_addr=40100000\0"					\
+	"ramdisk_addr=40280000\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=protect off 40000000 +${filesize};"			\
+		"erase 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"protect on 40000000 +${filesize}\0"			\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -144,7 +143,7 @@
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
-#undef CONFIG_RTC_MPC8xx		/* MPC866 does not support RTC	*/
+#undef CONFIG_RTC_MPC8xx		/* MPC885 does not support RTC	*/
 
 #define	CONFIG_TIMESTAMP		/* but print image timestmps	*/
 
@@ -230,7 +229,7 @@
 #define CFG_FLASH_BASE		0x40000000
 #define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
@@ -242,16 +241,20 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
 #define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
-#define CFG_ENV_SIZE		0x08000 /* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x20000 /* Total Size of Environment Sector	*/
+#define CFG_ENV_SIZE		0x08000 /* Total Size of Environment		*/
+#define CFG_ENV_SECT_SIZE	0x40000 /* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
@@ -434,26 +437,30 @@
 #define CFG_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
 
 /*
- * Memory Periodic Timer Prescaler
- * Periodic timer for refresh, start with refresh rate for 40 MHz clock
- * (CFG_8xx_CPUCLK_MIN / CFG_PTA_PER_CLK)
+ * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad)
+ *
+ *                        CPUclock(MHz) * 31.2
+ * CFG_MAMR_PTA = -----------------------------------     with DFBRG = 0
+ *                2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16
+ *
+ * CPU clock =  15 MHz:  CFG_MAMR_PTA =  29   ->  4 * 7.73 us
+ * CPU clock =  50 MHz:  CFG_MAMR_PTA =  97   ->  4 * 7.76 us
+ * CPU clock =  66 MHz:  CFG_MAMR_PTA = 128   ->  4 * 7.75 us
+ * CPU clock = 133 MHz:  CFG_MAMR_PTA = 255   ->  4 * 7.67 us
+ *
+ * Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will
+ * be met also in the default configuration, i.e. if environment variable
+ * 'cpuclk' is not set.
  */
-#define CFG_MAMR_PTA		39
+#define CFG_MAMR_PTA		128
 
 /*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * Memory Periodic Timer Prescaler Register (MPTPR) values.
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+/* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */
+#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16
+/* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */
+#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8
 
 /*
  * MAMR settings for SDRAM
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
new file mode 100644
index 0000000..194788b
--- /dev/null
+++ b/include/configs/atstk1003.h
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Configuration settings for the ATSTK1003 CPU daughterboard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AVR32			1
+#define CONFIG_AT32AP			1
+#define CONFIG_AT32AP7001		1
+#define CONFIG_ATSTK1003		1
+#define CONFIG_ATSTK1000		1
+
+#define CONFIG_ATSTK1000_EXT_FLASH	1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ				1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL			1
+#define CFG_POWER_MANAGER		1
+#define CFG_OSC0_HZ			20000000
+#define CFG_PLL0_DIV			1
+#define CFG_PLL0_MUL			7
+#define CFG_PLL0_SUPPRESS_CYCLES	16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
+#define CFG_CLKDIV_CPU			0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
+#define CFG_CLKDIV_HSB			1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
+#define CFG_CLKDIV_PBA			2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
+#define CFG_CLKDIV_PBB			1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ *   icp = PLLOPT<2>
+ *   ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT			0x04
+
+#undef CONFIG_USART0
+#define CONFIG_USART1			1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION		1
+
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_STACKSIZE		(2048)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0 root=/dev/mmcblk0p1 rootwait"
+
+#define CONFIG_BOOTCOMMAND						\
+	"mmcinit; ext2load mmc 0:1 0x10400000 /boot/uImage; bootm"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_AUTOBOOT			1
+#define CONFIG_AUTOBOOT_KEYED		1
+#define CONFIG_AUTOBOOT_PROMPT				\
+	"Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR	"d"
+#define CONFIG_AUTOBOOT_STOP_STR	" "
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_ATMEL_USART		1
+#define CONFIG_PIO2			1
+#define CFG_HSDRAMC			1
+#define CONFIG_MMC			1
+
+#define CFG_DCACHE_LINESZ		32
+#define CFG_ICACHE_LINESZ		32
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+/* External flash on STK1000 */
+#if 0
+#define CFG_FLASH_CFI			1
+#define CFG_FLASH_CFI_DRIVER		1
+#endif
+
+#define CFG_FLASH_BASE			0x00000000
+#define CFG_FLASH_SIZE			0x800000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		135
+
+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE			0x24000000
+#define CFG_INTRAM_SIZE			0x8000
+
+#define CFG_SDRAM_BASE			0x10000000
+
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_SIZE			65536
+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN			(256*1024)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT			"Uboot> "
+#define CFG_CBSIZE			256
+#define CFG_MAXARGS			16
+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP			1
+
+#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
new file mode 100644
index 0000000..1bad171
--- /dev/null
+++ b/include/configs/atstk1004.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Configuration settings for the ATSTK1003 CPU daughterboard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AVR32			1
+#define CONFIG_AT32AP			1
+#define CONFIG_AT32AP7002		1
+#define CONFIG_ATSTK1004		1
+#define CONFIG_ATSTK1000		1
+
+#define CONFIG_ATSTK1000_EXT_FLASH	1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ				1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL			1
+#define CFG_POWER_MANAGER		1
+#define CFG_OSC0_HZ			20000000
+#define CFG_PLL0_DIV			1
+#define CFG_PLL0_MUL			7
+#define CFG_PLL0_SUPPRESS_CYCLES	16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
+#define CFG_CLKDIV_CPU			0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
+#define CFG_CLKDIV_HSB			1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
+#define CFG_CLKDIV_PBA			2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
+#define CFG_CLKDIV_PBB			1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ *   icp = PLLOPT<2>
+ *   ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT			0x04
+
+#undef CONFIG_USART0
+#define CONFIG_USART1			1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION		1
+
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_STACKSIZE		(2048)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0 root=/dev/mmcblk0p1 rootwait"
+
+#define CONFIG_BOOTCOMMAND						\
+	"mmcinit; ext2load mmc 0:1 0x10200000 /boot/uImage; bootm"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_AUTOBOOT			1
+#define CONFIG_AUTOBOOT_KEYED		1
+#define CONFIG_AUTOBOOT_PROMPT				\
+	"Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR	"d"
+#define CONFIG_AUTOBOOT_STOP_STR	" "
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_ATMEL_USART		1
+#define CONFIG_PIO2			1
+#define CFG_HSDRAMC			1
+#define CONFIG_MMC			1
+
+#define CFG_DCACHE_LINESZ		32
+#define CFG_ICACHE_LINESZ		32
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+/* External flash on STK1000 */
+#if 0
+#define CFG_FLASH_CFI			1
+#define CFG_FLASH_CFI_DRIVER		1
+#endif
+
+#define CFG_FLASH_BASE			0x00000000
+#define CFG_FLASH_SIZE			0x800000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		135
+
+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE			0x24000000
+#define CFG_INTRAM_SIZE			0x8000
+
+#define CFG_SDRAM_BASE			0x10000000
+#define CFG_SDRAM_16BIT			1
+
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_SIZE			65536
+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN			(256*1024)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00200000)
+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT			"Uboot> "
+#define CFG_CBSIZE			256
+#define CFG_MAXARGS			16
+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP			1
+
+#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
new file mode 100644
index 0000000..ae0d018
--- /dev/null
+++ b/include/configs/ms7722se.h
@@ -0,0 +1,136 @@
+/*
+ * Configuation settings for the Hitachi Solution Engine 7722
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MS7722SE_H
+#define __MS7722SE_H
+
+#undef DEBUG
+#define CONFIG_SH		1
+#define CONFIG_SH4		1
+#define CONFIG_CPU_SH7722	1
+#define CONFIG_MS7722SE		1
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_ENV
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS    	"console=ttySC0,115200 root=1f01"
+#define CONFIG_NETMASK          255.255.255.0
+#define CONFIG_IPADDR		192.168.0.22
+#define CONFIG_SERVERIP		192.168.0.1
+#define CONFIG_GATEWAYIP	192.168.0.1
+
+#define CONFIG_VERSION_VARIABLE
+#undef  CONFIG_SHOW_BOOT_PROGRESS
+
+/* SMC9111 */
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE    (0xB8000000)
+
+/* MEMORY */
+#define MS7722SE_SDRAM_BASE	(0x8C000000)
+#define MS7722SE_FLASH_BASE_1	(0xA0000000)
+#define MS7722SE_FLASH_BANK_SIZE	(8*1024 * 1024)
+
+#define CFG_LONGHELP				/* undef to save memory	*/
+#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CFG_CBSIZE		256		/* Buffer size for input from the Console */
+#define CFG_PBSIZE		256		/* Buffer size for Console output */
+#define CFG_MAXARGS		16		/* max args accepted for monitor commands */
+#define CFG_BARGSIZE		512		/* Buffer size for Boot Arguments passed to kernel */
+#define CFG_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate settings for this board */
+
+/* SCIF */
+#define CFG_SCIF_CONSOLE	1
+#define CONFIG_CONS_SCIF0	1
+#undef  CFG_CONSOLE_INFO_QUIET			/* Suppress display of console information at boot */
+#undef  CFG_CONSOLE_OVERWRITE_ROUTINE
+#undef  CFG_CONSOLE_ENV_OVERWRITE
+
+#define CFG_MEMTEST_START	(MS7722SE_SDRAM_BASE)
+#define CFG_MEMTEST_END		(CFG_MEMTEST_START + (60 * 1024 * 1024))
+
+#undef  CFG_ALT_MEMTEST		/* Enable alternate, more extensive, memory test */
+#undef  CFG_MEMTEST_SCRATCH	/* Scratch address used by the alternate memory test */
+
+#undef  CFG_LOADS_BAUD_CHANGE	/* Enable temporary baudrate change while serial download */
+
+#define CFG_SDRAM_BASE	(MS7722SE_SDRAM_BASE)
+#define CFG_SDRAM_SIZE	(64 * 1024 * 1024)	/* maybe more, but if so u-boot doesn't know about it... */
+
+#define CFG_LOAD_ADDR	(CFG_SDRAM_BASE + 4 * 1024 * 1024)	/* default load address for scripts ?!? */
+
+#define CFG_MONITOR_BASE	(MS7722SE_FLASH_BASE_1)	/* Address of u-boot image
+						   	in Flash (NOT run time address in SDRAM) ?!? */
+#define CFG_MONITOR_LEN	(128 * 1024)		/* */
+#define CFG_MALLOC_LEN	(256 * 1024)		/* Size of DRAM reserved for malloc() use */
+#define CFG_GBL_DATA_SIZE	(256)		/* size in bytes reserved for initial data */
+#define CFG_BOOTMAPSZ	(8 * 1024 * 1024)
+
+/* FLASH */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#undef  CFG_FLASH_QUIET_TEST
+#define CFG_FLASH_EMPTY_INFO			/* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_BASE		(MS7722SE_FLASH_BASE_1)	/* Physical start address of Flash memory */
+
+#define CFG_MAX_FLASH_SECT	150		/* Max number of sectors on each
+				   			Flash chip */
+
+/* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */
+#define CFG_MAX_FLASH_BANKS	2
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \
+				  CFG_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \
+				}
+
+#define CFG_FLASH_ERASE_TOUT	(3 * 1000)	/* Timeout for Flash erase operations (in ms) */
+#define CFG_FLASH_WRITE_TOUT	(3 * 1000)	/* Timeout for Flash write operations (in ms) */
+#define CFG_FLASH_LOCK_TOUT	(3 * 1000)	/* Timeout for Flash set sector lock bit operations (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT	(3 * 1000)	/* Timeout for Flash clear lock bit operations (in ms) */
+
+#undef  CFG_FLASH_PROTECTION			/* Use hardware flash sectors protection instead of U-Boot software protection */
+
+#undef  CFG_DIRECT_FLASH_TFTP
+
+#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE	1
+#define CFG_ENV_SECT_SIZE	(8 * 1024)
+#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + (1 * CFG_ENV_SECT_SIZE))
+#define CFG_ENV_OFFSET		(CFG_ENV_ADDR - CFG_FLASH_BASE) 	/* Offset of env Flash sector relative to CFG_FLASH_BASE */
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + (2 * CFG_ENV_SECT_SIZE))
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ	33333333
+#define TMU_CLK_DIVIDER		(4)	/* 4 (default), 16, 64, 256 or 1024 */
+#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+#endif	/* __MS7722SE_H */
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
new file mode 100644
index 0000000..3668156
--- /dev/null
+++ b/include/configs/ms7750se.h
@@ -0,0 +1,108 @@
+/*
+ * Configuation settings for the Hitachi Solution Engine 7750
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MS7750SE_H
+#define __MS7750SE_H
+
+#undef DEBUG
+#define CONFIG_SH		1
+#define CONFIG_SH4		1
+#define CONFIG_CPU_SH7750	1
+/* #define CONFIG_CPU_SH7751	1 */
+/* #define CONFIG_CPU_TYPE_R	1 */
+#define CONFIG_MS7750SE		1
+#define __LITTLE_ENDIAN__	1
+
+/*
+ * Command line configuration.
+ */
+/*#include <config_cmd_default.h>*/
+
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_ENV
+
+#define CFG_SCIF_CONSOLE	1
+#define CONFIG_BAUDRATE		38400
+#define CONFIG_CONS_SCIF1	1
+#define BOARD_LATE_INIT		1
+
+#define CONFIG_BOOTDELAY	-1
+#define CONFIG_BOOTARGS    	"console=ttySC0,38400"
+#define CONFIG_ENV_OVERWRITE	1
+
+/* SDRAM */
+#define CFG_SDRAM_BASE		(0x8C000000)
+#define CFG_SDRAM_SIZE		(64 * 1024 * 1024)
+
+#define CFG_LONGHELP
+#define CFG_PROMPT		"=> "
+#define CFG_CBSIZE		256
+#define CFG_PBSIZE		256
+#define CFG_MAXARGS		16
+#define CFG_BARGSIZE		512
+/* List of legal baudrate settings for this board */
+#define CFG_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
+
+#define CFG_MEMTEST_START	(CFG_SDRAM_BASE)
+#define CFG_MEMTEST_END		(TEXT_BASE - 0x100000)
+
+/* NOR Flash */
+/* #define CFG_FLASH_BASE		(0xA1000000)*/
+#define CFG_FLASH_BASE		(0xA0000000)
+#define CFG_MAX_FLASH_BANKS	(1)	/* Max number of
+				 	 * Flash memory banks
+				 	 */
+#define CFG_MAX_FLASH_SECT	142
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+
+#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 4 * 1024 * 1024)
+#define CFG_MONITOR_BASE	(CFG_FLASH_BASE)	/* Address of u-boot image in Flash */
+#define CFG_MONITOR_LEN		(128 * 1024)
+#define CFG_MALLOC_LEN		(256 * 1024)		/* Size of DRAM reserved for malloc() use */
+
+#define CFG_GBL_DATA_SIZE	(256)			/* size in bytes reserved for initial data */
+#define CFG_BOOTMAPSZ		(8 * 1024 * 1024)
+#define CFG_RX_ETH_BUFFER	(8)
+
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#undef CFG_FLASH_CFI_BROKEN_TABLE
+#undef  CFG_FLASH_QUIET_TEST
+#define CFG_FLASH_EMPTY_INFO				/* print 'E' for empty sector on flinfo */
+
+
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000
+#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_FLASH_ERASE_TOUT  	120000
+#define CFG_FLASH_WRITE_TOUT	500
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ	33333333
+#define TMU_CLK_DIVIDER		4
+#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+#endif /* __MS7750SE_H */
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index edae6f4..827a28f 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -193,11 +193,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/