Merge branch 'master' of /home/stefan/git/u-boot/u-boot

114 files changed, 6679 insertions, 1206 deletions

diff --git a/include/configs/ADCIOP.h b/include/configs/ADCIOP.h
index 4632991..5d28168 100644
--- a/include/configs/ADCIOP.h
+++ b/include/configs/ADCIOP.h
@@ -191,15 +191,6 @@
 #define CFG_ETH_DEV_FN	     0x0000
 #define CFG_ETH_IOBASE	     0x0fff0000
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		2048	/* For PLX IOP480			*/
-#define CFG_CACHELINE_SIZE	16	/* For AMCC 401/403 CPUs		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h
index d25aa74..d490b33 100644
--- a/include/configs/AP1000.h
+++ b/include/configs/AP1000.h
@@ -193,14 +193,6 @@
 #define CFG_ENV_ADDR	    \
     (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
 #endif
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value    */
-#endif
 
 /*
  * Init Memory Controller:
diff --git a/include/configs/AR405.h b/include/configs/AR405.h
index 0f301ec..50f09b0 100644
--- a/include/configs/AR405.h
+++ b/include/configs/AR405.h
@@ -213,16 +213,6 @@
 #define CFG_ENV_ADDR_REDUND     0xFFFA0000
 #define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 9adbba9..85c6a99 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -258,16 +258,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h
new file mode 100644
index 0000000..f7020b4
--- /dev/null
+++ b/include/configs/ATUM8548.h
@@ -0,0 +1,458 @@
+/*
+ * Copyright 2007
+ * Robert Lazarski, Instituto Atlantico, robertlazarski@gmail.com
+ *
+ * Copyright 2004, 2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * atum8548 board configuration file
+ *
+ * Please refer to doc/README.atum8548 for more info.
+ *
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Debug Options, Disable in production
+#define ET_DEBUG		1
+#define CONFIG_PANIC_HANG	1
+#define DEBUG			1
+*/
+
+/* CPLD Configuration Options */
+#define MPC85xx_ATUM_CLKOCR            0x80000002
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE		1	/* BOOKE */
+#define CONFIG_E500		1	/* BOOKE e500 family */
+#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48 */
+#define CONFIG_MPC8548		1	/* MPC8548 specific */
+
+#define CONFIG_PCI		1	/* enable any pci type devices */
+#define CONFIG_PCI1		1	/* PCI controller 1 */
+#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
+#define CONFIG_PCI2             1	/* PCI controller 2 */
+#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET	1	/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM	1 	/* Use SPD EEPROM for DDR setup*/
+#undef CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
+
+#define MPC85xx_DDR_SDRAM_CLK_CNTL	/* 85xx has clock control reg */
+
+#define CONFIG_SYS_CLK_FREQ	33000000
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE			/* toggle L2 cache */
+#define CONFIG_BTB			/* toggle branch predition */
+#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
+#define CONFIG_CLEAR_LAW0		/* Clear LAW0 in cpu_init_r */
+
+/*
+ * Only possible on E500 Version 2 or newer cores.
+ */
+#define CONFIG_ENABLE_36BIT_PHYS	1
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+
+#define CONFIG_CMD_SDRAM 		1	/* SDRAM DIMM SPD info printout */
+#define CONFIG_ENABLE_36BIT_PHYS	1
+#undef	CFG_DRAM_TEST
+#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00400000
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+
+#define PCI_SPEED		33333000        /* CPLD currenlty does not have PCI setup info */
+#define CFG_PCI1_ADDR	(CFG_CCSRBAR+0x8000)
+#define CFG_PCI2_ADDR	(CFG_CCSRBAR+0x9000)
+#define CFG_PCIE1_ADDR	(CFG_CCSRBAR+0xa000)
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+
+#if defined(CONFIG_SPD_EEPROM)
+    /*
+     * Determine DDR configuration from I2C interface.
+     */
+    #define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+
+#else
+    /*
+     * Manually set up DDR parameters
+     */
+    #define CFG_SDRAM_SIZE	1024		/* DDR is 1024MB */
+    #define CFG_DDR_CS0_BNDS	0x0000000f	/* 0-1024 */
+    #define CFG_DDR_CS0_CONFIG	0x80000102
+    #define CFG_DDR_TIMING_0	0x00260802
+    #define CFG_DDR_TIMING_1	0x38355322
+    #define CFG_DDR_TIMING_2	0x039048c7
+    #define CFG_DDR_CONTROL	0xc2000000	/* unbuffered,no DYN_PWR */
+    #define CFG_DDR_MODE	0x00000432
+    #define CFG_DDR_INTERVAL	0x05150100
+    #define DDR_SDRAM_CFG	0x43000000
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/*
+ * Local Bus Definitions
+ */
+
+/*
+ * FLASH on the Local Bus
+ * based on flash chip S29GL01GP
+ * One bank, 128M, using the CFI driver.
+ * Boot from BR0 bank at 0xf800_0000
+ *
+ * BR0:
+ *    Base address 0 = 0xF8000000 = BR0[0:16] = 1111 1000 0000 0000 0
+ *    Port Size = 16 bits = BRx[19:20] = 10
+ *    Use GPCM = BRx[24:26] = 000
+ *    Valid = BRx[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1000 0000 0000 0001 0000 0000 0001 = f8001001    BR0
+ *
+ * OR0:
+ *    Addr Mask = 128M = ORx[0:16] = 1111 1000 0000 0000 0
+ *    Reserved ORx[17:18] = 00
+ *    CSNT = ORx[20] = 1
+ *    ACS = half cycle delay = ORx[21:22] = 11
+ *    SCY = 6 = ORx[24:27] = 0110
+ *    TRLX = use relaxed timing = ORx[29] = 1
+ *    EAD = use external address latch delay = OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1000 0000 0000 0000 1110 0110 0101 = f8000E65    ORx
+ */
+
+#define CFG_BOOT_BLOCK		0xf8000000	/* boot TLB block */
+#define CFG_FLASH_BASE		CFG_BOOT_BLOCK	/* start of FLASH 128M */
+
+#define CFG_BR0_PRELIM		0xf8001001
+
+#define	CFG_OR0_PRELIM		0xf8000E65
+
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks	*/
+#define CFG_MAX_FLASH_SECT	1024		/* sectors per device */
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	512000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	8000	/* Flash Write Timeout (ms) */
+
+
+#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER    1
+#define CFG_FLASH_CFI           1
+#define CFG_FLASH_EMPTY_INFO
+
+/*
+ * Flash on the LocalBus
+ */
+#define CFG_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable	 */
+
+/* Memory */
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+
+#define CFG_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */
+
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_EEPROM_ADDR	0x57
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+#define CFG_PCI_PHYS		0x80000000	/* 1G PCI TLB */
+
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
+
+#ifdef CONFIG_PCI2
+#define CFG_PCI2_MEM_BASE	0xC0000000
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	0xe2800000
+#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
+#endif
+
+#ifdef CONFIG_PCIE1
+#define CFG_PCIE1_MEM_BASE	0xa0000000
+#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCIE1_IO_BASE	0x00000000
+#define CFG_PCIE1_IO_PHYS	0xe3000000
+#define CFG_PCIE1_IO_SIZE	0x00100000	/*   1M */
+#endif
+
+
+#if !defined(CONFIG_PCI_PNP)
+    #define PCI_ENET0_IOADDR	0xe0000000
+    #define PCI_ENET0_MEMADDR	0xe0000000
+    #define PCI_IDSEL_NUMBER	0x0c 	/* slot0->3(IDSEL)=12->15 */
+#endif
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP			/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS	0x00000000
+#define CFG_PCI_MEMORY_PHYS	0x00000000
+#define CFG_PCI_MEMORY_SIZE	0x80000000
+
+#endif	/* CONFIG_PCI */
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+#define CONFIG_MII		1	/* MII PHY management */
+#define CONFIG_TSEC1	1
+#define CONFIG_TSEC1_NAME	"eTSEC0"
+#define CONFIG_TSEC2	1
+#define CONFIG_TSEC2_NAME	"eTSEC1"
+#define CONFIG_TSEC3	1
+#define CONFIG_TSEC3_NAME	"eTSEC2"
+#define CONFIG_TSEC4	1
+#define CONFIG_TSEC4_NAME	"eTSEC3"
+#undef CONFIG_MPC85XX_FEC
+
+#define TSEC1_PHY_ADDR		0
+#define TSEC2_PHY_ADDR		1
+#define TSEC3_PHY_ADDR		2
+#define TSEC4_PHY_ADDR		3
+
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define TSEC3_PHYIDX		0
+#define TSEC4_PHYIDX		0
+#define TSEC1_FLAGS		TSEC_GIGABIT
+#define TSEC2_FLAGS		TSEC_GIGABIT
+#define TSEC3_FLAGS		TSEC_GIGABIT
+#define TSEC4_FLAGS		TSEC_GIGABIT
+
+/* Options are: eTSEC[0-3] */
+#define CONFIG_ETHPRIME		"eTSEC2"
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+#endif	/* CONFIG_TSEC_ENET */
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#define CFG_ENV_SIZE		0x2000
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR	 00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR	 00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR	 00:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR	 00:E0:0C:00:03:FD
+#endif
+
+#define CONFIG_IPADDR	 10.101.43.142
+
+#define CONFIG_HOSTNAME	 atum
+#define CONFIG_ROOTPATH	 /nfsroot
+#define CONFIG_BOOTFILE	 /tftpboot/uImage.atum
+#define CONFIG_UBOOTPATH	/tftpboot/uboot.bin	/* TFTP server */
+
+#define CONFIG_SERVERIP	 10.101.43.10
+#define CONFIG_GATEWAYIP 10.101.45.1
+#define CONFIG_NETMASK	 255.255.248.0
+
+#define CONFIG_LOADADDR	1000000	/*default location for tftp and bootm*/
+
+#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
+#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs*/
+
+#define CONFIG_BAUDRATE	115200
+
+#define CONFIG_NFSBOOTCOMMAND						\
+   "setenv bootargs root=/dev/nfs rw "					\
+      "nfsroot=$serverip:$rootpath "					\
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"	                \
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $dtbaddr $dtbfile;"						\
+   "bootm $loadaddr - $dtbaddr"
+
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "setenv bootargs root=/dev/ram rw "					\
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $ramdiskaddr $ramdiskfile;"					\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $dtbaddr $dtbfile;"						\
+   "bootm $loadaddr $ramdiskaddr $dtbaddr"
+
+#define CONFIG_BOOTCOMMAND	CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h
index ae32f6b..7029dbd 100644
--- a/include/configs/CANBT.h
+++ b/include/configs/CANBT.h
@@ -181,15 +181,6 @@
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
 #define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 0321650..1603c9c 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -473,7 +473,7 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 /* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */
 #define CFG_ISA_IO 0xE8000000
-/* see also drivers/videomodes.c */
+/* see also drivers/video/videomodes.c */
 #define CFG_DEFAULT_VIDEO_MODE 0x303
 #endif
 
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 21cd9c1..285cd5c 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -273,16 +273,6 @@
 #define CFG_EEPROM_WREN         1
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 #define CFG_PLD_BASE            0xf0000000
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index a3717b9..58900c3 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -223,16 +223,6 @@
 
 #define CFG_EEPROM_WREN         1
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index 1b948f6..bd43e1d 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -266,15 +266,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index fb71c5f..b248639 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -317,16 +317,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 4994319..1e9597d 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -288,16 +288,6 @@
 #define CFG_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
 #define CFG_VXWORKS_MAC_PTR     (CFG_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index 29f9292..a8029ea 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -319,16 +319,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h
deleted file mode 100644
index 318ada1..0000000
--- a/include/configs/CPCI440.h
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * (C) Copyright 2002
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/************************************************************************
- * board/config_CPCI440.h - configuration for esd CPCI-440 board
- ***********************************************************************/
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_CPCI440		1	    /* Board is ebony		*/
-#define CONFIG_440GP		1	    /* Specifc GP support	*/
-#define CONFIG_440		1	    /* ... PPC440 family	*/
-#define CONFIG_4xx		1	    /* ... PPC4xx family	*/
-#define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
-#undef	CFG_DRAM_TEST			    /* Disable-takes long time! */
-#define CONFIG_SYS_CLK_FREQ	33330000 /* external frequency to pll	*/
-
-/*-----------------------------------------------------------------------
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CFG_SDRAM_BASE	    0x00000000	    /* _must_ be 0		*/
-#define CFG_FLASH_BASE	    0xff800000	    /* start of FLASH		*/
-#if 1
-#define CFG_MONITOR_BASE    0xfffc0000	    /* start of monitor		*/
-#else
-#define CFG_MONITOR_BASE    0x01fc0000	    /* start of monitor		*/
-#endif
-#define CFG_PERIPHERAL_BASE 0xe0000000	    /* internal peripherals	*/
-#define CFG_ISRAM_BASE	    0xc0000000	    /* internal SRAM		*/
-
-#define CFG_FPGA_BASE	    (CFG_PERIPHERAL_BASE + 0x08300000)
-#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
-
-/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer (placed in internal SRAM)
- *----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_ADDR   CFG_ISRAM_BASE  /* Initial RAM address	*/
-#define CFG_INIT_RAM_END    0x2000	    /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE  128		    /* num bytes initial data	*/
-
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-
-#define CFG_MONITOR_LEN	    (192 * 1024)    /* Reserve 192 kB for Mon	*/
-#define CFG_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#undef CFG_EXT_SERIAL_CLOCK /*	 (1843200 * 6)	 / * Ext clk @ 11.059 MHz */
-#define CONFIG_BAUDRATE		9600
-
-#define CFG_BAUDRATE_TABLE  \
-    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
-
-/*-----------------------------------------------------------------------
- * NVRAM/RTC
- *
- * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
- * The DS1743 code assumes this condition (i.e. -- it assumes the base
- * address for the RTC registers is:
- *
- *	CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE
- *
- *----------------------------------------------------------------------*/
-#define CFG_NVRAM_SIZE	    (0x2000 - 8)    /* NVRAM size(8k)- RTC regs */
-#define CONFIG_RTC_DS174x	1		    /* DS1743 RTC		*/
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-#if 1 /* test-only */
-
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_FLASH_INCREMENT	0	/* there is only one bank		*/
-#define CFG_FLASH_PROTECTION	1	/* use hardware protection		*/
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#undef CFG_FLASH_BASE
-#define CFG_FLASH_BASE		0xFF800000 /* test-only...*/
-
-#else /* test-only */
-
-#define CFG_MAX_FLASH_BANKS	3		    /* number of banks	    */
-#define CFG_MAX_FLASH_SECT	32		    /* sectors per device   */
-
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#endif
-
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#if 0 /* test-only */
-#define CFG_ENV_IS_IN_NVRAM	1	    /* Environment uses NVRAM	*/
-#undef	CFG_ENV_IS_IN_FLASH		    /* ... not in flash		*/
-#undef	CFG_ENV_IS_IN_EEPROM		    /* ... not in EEPROM	*/
-
-#define CFG_ENV_SIZE		0x1000	    /* Size of Environment vars */
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
-#else
-
-#if 0 /* test-only */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x010	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
-				   /* total size of a CAT24WC16 is 2048 bytes */
-#else
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * I2C EEPROM (CAT24WC16) for environment
- */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
-/* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
-					/* 16 byte page write mode using*/
-					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-
-#endif
-
-#undef	CONFIG_BOOTARGS
-#undef	CONFIG_BOOTCOMMAND
-
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
-#define CONFIG_BAUDRATE		9600
-
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-#define CONFIG_MII		1	/* MII PHY management		*/
-#define CONFIG_PHY_ADDR		1	/* PHY address			*/
-#define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-#undef CONFIG_SPD_EEPROM       /* don't use SPD EEPROM for setup    */
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
-
-#if 0 /* test-only */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-#endif
-
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#if 0
-#define PCI_HOST_ADAPTER 0		/* configure ar pci adapter	*/
-#define PCI_HOST_FORCE	1		/* configure as pci host	*/
-#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/
-
-#define CONFIG_PCI			/* include pci support		*/
-#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/
-#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
-					/* resource configuration	*/
-
-#define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
-
-#define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/
-
-#define CFG_PCI_SUBSYS_VENDORID 0x0000	/* PCI Vendor ID: to-do!!!	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: to-do!!!	*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2MS	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
-#endif
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		32768	/* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-
-/* Configuration Port location */
-#define CONFIG_PORT_ADDR	0xF0000500
-
-/*-----------------------------------------------------------------------
- * Definitions for Serial Presence Detect EEPROM address
- * (to get SDRAM settings)
- */
-#define SPD_EEPROM_ADDRESS	0x50
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-#endif	/* __CONFIG_H */
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
index c7b623a..78b754c 100644
--- a/include/configs/CPCIISER4.h
+++ b/include/configs/CPCIISER4.h
@@ -205,15 +205,6 @@
 #define CFG_ENV_SIZE		0x300	/* 768 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index a965c12..2356858 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -192,12 +192,6 @@
 #define CFG_MEMTEST_END		(CFG_SDRAM_SIZE * 1024 * 1024 - CFG_MEM_END_USAGE)
 /* END ENVIRONNEMENT FLASH */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration.  Only used to ..?? clear it, I guess..
- */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	32
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h
index 627ea14..117a136 100644
--- a/include/configs/DASA_SIM.h
+++ b/include/configs/DASA_SIM.h
@@ -182,15 +182,6 @@
 #define CFG_PCI9054_DEV_FN   0x0800
 #define CFG_PCI9054_IOBASE   0x0eff0000
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		2048	/* For PLX IOP480			*/
-#define CFG_CACHELINE_SIZE	16	/* For AMCC 401/403 CPUs		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/DP405.h b/include/configs/DP405.h
index 2eadbea..912fb2a 100644
--- a/include/configs/DP405.h
+++ b/include/configs/DP405.h
@@ -242,16 +242,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index 5c595f5..c8bf67f 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -232,15 +232,6 @@
 #define CFG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h
index 5d48d2b..dc15b0c 100644
--- a/include/configs/ERIC.h
+++ b/include/configs/ERIC.h
@@ -323,14 +323,6 @@
 #define CFG_ENV_ADDR		\
 	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
 #endif
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
 
 /*
  * Init Memory Controller:
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index a3f38bb..251227c 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -205,10 +205,6 @@
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-/* Cache configuration */
-#define CFG_DCACHE_SIZE		8192
-#define CFG_CACHELINE_SIZE	32
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index 9c713c6..c12ce48 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -331,16 +331,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index bfbf3a8..3eb3131 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -273,7 +273,9 @@
  * Virtex2 FPGA configuration support
  */
 #define CONFIG_FPGA_COUNT		1
-#define CONFIG_FPGA				CFG_XILINX_VIRTEX2
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_VIRTEX2
 #define CFG_FPGA_PROG_FEEDBACK
 
 
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 8967b3f..18e5b3c 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -363,16 +363,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's    */
-					/* have only 8kB, 16kB is save here     */
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index 1ff7108..a389d58 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -257,16 +257,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index ea3b0b4..5b40ef6 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -279,15 +279,6 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405GPr CPUs	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 3644e43..816e63b 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -281,14 +281,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE	      8192	     /* For AMCC 405 CPUs	*/
-#define CFG_CACHELINE_SIZE    32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT   5		     /* log base 2 of the above */
-#endif
 
 /*
  * Internal Definitions
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index db30958..211f11d 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -192,7 +192,9 @@
 
 /* FPGA - Spartan 2 */
 /* experiment
-#define CONFIG_FPGA		CFG_SPARTAN3
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN3
 #define CONFIG_FPGA_COUNT	1
 #define CFG_FPGA_PROG_FEEDBACK
 #define CFG_FPGA_CHECK_CTRLC
@@ -292,7 +294,6 @@
 #endif
 
 /* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system
-/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system
    keep reset. */
 #undef CFG_FLASH_CFI
 #ifdef CFG_FLASH_CFI
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index 8d7ec59..d61b49e 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -346,14 +346,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE	      8192	     /* For AMCC 405 CPUs	*/
-#define CFG_CACHELINE_SIZE    32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT   5		     /* log base 2 of the above */
-#endif
 
 /*
  * Internal Definitions
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 5b526a0..9ddf82b 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -258,15 +258,6 @@
 */
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		0x4000	/* For AMCC 405GPr CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * Logbuffer Configuration
  */
 #undef CONFIG_LOGBUFFER 	/* supported but not enabled */
diff --git a/include/configs/ML2.h b/include/configs/ML2.h
index f488275..66dae21 100644
--- a/include/configs/ML2.h
+++ b/include/configs/ML2.h
@@ -201,14 +201,6 @@
 #define CFG_ENV_ADDR		\
 	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
 #endif
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
 
 /*
  * Init Memory Controller:
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 6568fe1..455bbe0 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -178,6 +178,7 @@
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN		(512 * 1024)	/* Reserved for malloc */
 
@@ -191,7 +192,7 @@
 
 #define CFG_LBC_MRTPR	0x20000000  /*TODO */ 	/* LB refresh timer prescal, 266MHz/32 */
 
-/* drivers/nand/nand.c */
+/* drivers/mtd/nand/nand.c */
 #define CFG_NAND_BASE		0xE2800000	/* 0xF0000000 */
 #define CFG_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
@@ -230,11 +231,7 @@
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8313@0"
-#define OF_SOC			"soc8313@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8313@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /*
  * Serial Port
@@ -326,7 +323,7 @@
  */
 #ifndef CFG_RAMBOOT
 	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 	#define CFG_ENV_SECT_SIZE	0x10000	/* 64K(one sector) for env */
 	#define CFG_ENV_SIZE		0x2000
 
@@ -389,11 +386,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	32
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-
 #define CFG_RCWH_PCIHOST 0x80000000	/* PCIHOST  */
 
 #ifdef CFG_66MHZ
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 376973b..4ea8709 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -116,6 +116,7 @@
 #undef  CFG_RAMBOOT
 #endif
 
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
@@ -269,12 +270,7 @@
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8323@0"
-#define OF_SOC			"soc8323@e0000000"
-#define OF_QE			"qe@e0100000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8323@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
@@ -354,8 +350,8 @@
  */
 #ifndef CFG_RAMBOOT
 	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+	#define CFG_ENV_SECT_SIZE	0x20000
 	#define CFG_ENV_SIZE		0x2000
 #else
 	#define CFG_NO_FLASH		1	/* Flash is not usable now */
@@ -427,15 +423,6 @@
 #define CFG_HID2		HID2_HBE
 
 /*
- * Cache Config
- */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value */
-#endif
-
-/*
  * MMU Setup
  */
 
@@ -517,6 +504,7 @@
  */
 #define CONFIG_ENV_OVERWRITE
 
+#define CONFIG_HAS_ETH0				/* add support for "ethaddr" */
 #define CONFIG_ETHADDR	00:04:9f:ef:03:01
 #define CONFIG_HAS_ETH1				/* add support for "eth1addr" */
 #define CONFIG_ETH1ADDR	00:04:9f:ef:03:02
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index c9c6d88..25ac58c 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -145,6 +145,7 @@
 #undef  CFG_RAMBOOT
 #endif
 
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
@@ -320,12 +321,7 @@
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8323@0"
-#define OF_SOC			"soc8323@e0000000"
-#define OF_QE			"qe@e0100000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8323@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
@@ -410,8 +406,8 @@
  */
 #ifndef CFG_RAMBOOT
 	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+	#define CFG_ENV_SECT_SIZE	0x20000
 	#define CFG_ENV_SIZE		0x2000
 #else
 	#define CFG_NO_FLASH		1	/* Flash is not usable now */
@@ -486,15 +482,6 @@
 #define CFG_HID2		HID2_HBE
 
 /*
- * Cache Config
- */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value */
-#endif
-
-/*
  * MMU Setup
  */
 
@@ -579,6 +566,7 @@
 #define CONFIG_ENV_OVERWRITE
 
 #if defined(CONFIG_UEC_ETH)
+#define CONFIG_HAS_ETH0
 #define CONFIG_ETHADDR	00:04:9f:ef:03:01
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR	00:04:9f:ef:03:02
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 92555ba..437a9a5 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -341,11 +341,7 @@
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8349@0"
-#define OF_SOC			"soc8349@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8349@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support*/
@@ -456,7 +452,7 @@
  */
 #ifndef CFG_RAMBOOT
 	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 	#define CFG_ENV_SECT_SIZE	0x20000	/* 128K(one sector) for env */
 	#define CFG_ENV_SIZE		0x2000
 
@@ -531,13 +527,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 #define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
 
 #if 1 /*528/264*/
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 54cab52..48c2736 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -261,6 +261,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
 
@@ -297,12 +298,8 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP
-
-#define OF_CPU			"PowerPC,8349@0"
-#define OF_SOC			"soc8349@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8349@e0000000/serial@4500"
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /*
  * PCI
@@ -404,8 +401,8 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #ifndef CFG_RAMBOOT
   #define CFG_ENV_IS_IN_FLASH
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
   #define CFG_ENV_SECT_SIZE	0x10000 /* 64K (one sector) for environment */
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + (4 * CFG_ENV_SECT_SIZE))
   #define CFG_ENV_SIZE		0x2000
 #else
   #define CFG_NO_FLASH		/* Flash is not usable now */
@@ -490,15 +487,6 @@ boards, we say we have two, but don't display a message if we find only one. */
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log2 of the above value */
-#endif
-
 #define CFG_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 41f062c..fdacb90 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -170,6 +170,7 @@
 #undef	CFG_RAMBOOT
 #endif
 
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
 
@@ -346,16 +347,8 @@
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
-#undef  CONFIG_OF_FLAT_TREE
 #define CONFIG_OF_BOARD_SETUP	1
-#define CONFIG_OF_HAS_BD_T	1
-#define CONFIG_OF_HAS_UBOOT_ENV	1
-
-#define OF_CPU			"PowerPC,8360@0"
-#define OF_SOC			"soc8360@e0000000"
-#define OF_QE			"qe@e0100000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8360@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
@@ -443,8 +436,8 @@
 
 #ifndef CFG_RAMBOOT
 	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-	#define CFG_ENV_SECT_SIZE	0x40000 /* 256K(one sector) for env */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+	#define CFG_ENV_SECT_SIZE	0x20000
 	#define CFG_ENV_SIZE		0x2000
 #else
 	#define CFG_NO_FLASH		1	/* Flash is not usable now */
@@ -519,15 +512,6 @@
 #define CFG_HID2		HID2_HBE
 
 /*
- * Cache Config
- */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5 /*log base 2 of the above value */
-#endif
-
-/*
  * MMU Setup
  */
 
@@ -613,6 +597,7 @@
 #define CONFIG_ENV_OVERWRITE
 
 #if defined(CONFIG_UEC_ETH)
+#define CONFIG_HAS_ETH0
 #define CONFIG_ETHADDR	00:04:9f:ef:01:01
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR 00:04:9f:ef:01:02
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
new file mode 100644
index 0000000..0f6f8f1
--- /dev/null
+++ b/include/configs/MPC8360ERDK.h
@@ -0,0 +1,538 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *                    Dave Liu <daveliu@freescale.com>
+ *
+ * Copyright (C) 2007 Logic Product Development, Inc.
+ *                    Peter Barada <peterb@logicpd.com>
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *                    Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1 /* E300 family */
+#define CONFIG_QE		1 /* Has QE */
+#define CONFIG_MPC83XX		1 /* MPC83XX family */
+#define CONFIG_MPC8360		1 /* MPC8360 CPU specific */
+#define CONFIG_MPC8360ERDK	1 /* MPC8360ERDK board specific */
+
+/*
+ * System Clock Setup
+ */
+#ifdef CONFIG_CLKIN_33MHZ
+#define CONFIG_83XX_CLKIN		33000000
+#define CONFIG_SYS_CLK_FREQ		33000000
+#define PCI_33M				1
+#define HRCWL_CSB_TO_CLKIN_MPC8360ERDK	HRCWL_CSB_TO_CLKIN_10X1
+#else
+#define CONFIG_83XX_CLKIN		66000000
+#define CONFIG_SYS_CLK_FREQ		66000000
+#define PCI_66M				1
+#define HRCWL_CSB_TO_CLKIN_MPC8360ERDK	HRCWL_CSB_TO_CLKIN_5X1
+#endif /* CONFIG_CLKIN_33MHZ */
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_MPC8360ERDK |\
+	HRCWL_CORE_TO_CSB_2X1 |\
+	HRCWL_CE_TO_PLL_1X15)
+
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCICKDRV_ENABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_SECONDARY_DDR_DISABLE |\
+	HRCWH_BIG_ENDIAN |\
+	HRCWH_LALE_EARLY)
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH		0x00000000
+#define CFG_SICRL		0x40000000
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_R
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMR		0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE		0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE		CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
+#define CFG_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
+				DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+
+#define CFG_83XX_DDR_USES_CS0
+
+#undef CONFIG_DDR_ECC		/* support DDR ECC function */
+#undef CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
+
+/*
+ * DDRCDR - DDR Control Driver Register
+ */
+#define CFG_DDRCDR_VALUE	0x80080001
+
+#undef CONFIG_SPD_EEPROM	/* Do not use SPD EEPROM for DDR setup */
+
+/*
+ * Manually set up DDR parameters
+ */
+#define CONFIG_DDR_II
+#define CFG_DDR_SIZE		256 /* MB */
+#define CFG_DDRCDR		0x80080001
+#define CFG_DDR_CS0_BNDS	0x0000000f
+#define CFG_DDR_CS0_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | \
+				 CSCONFIG_COL_BIT_10)
+#define CFG_DDR_TIMING_0	0x00330903
+#define CFG_DDR_TIMING_1	0x3835a322
+#define CFG_DDR_TIMING_2	0x00104909
+#define CFG_DDR_TIMING_3	0x00000000
+#define CFG_DDR_CLK_CNTL	0x02000000
+#define CFG_DDR_MODE		0x47800432
+#define CFG_DDR_MODE2		0x8000c000
+#define CFG_DDR_INTERVAL	0x045b0100
+#define CFG_DDR_SDRAM_CFG	0x03000000
+#define CFG_DDR_SDRAM_CFG2	0x00001000
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST		/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00000000 /* memtest region */
+#define CFG_MEMTEST_END		0x00100000
+
+/*
+ * The reserved memory
+ */
+#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor */
+#define CFG_FLASH_BASE		0xFF800000 /* FLASH base address */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef	CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END	0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE	0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR		0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
+#define CFG_FLASH_SIZE		8 /* max FLASH size is 32M */
+#define CFG_FLASH_PROTECTION	1 /* Use intel Flash protection. */
+
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
+
+#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | /* Flash Base address */ \
+			(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+			BR_V)	/* valid */
+#define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
+				OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | \
+				OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#define CFG_MAX_FLASH_BANKS	1 /* number of banks */
+#define CFG_MAX_FLASH_SECT	256 /* max sectors per device */
+
+#undef	CFG_FLASH_CHECKSUM
+
+/*
+ * NAND flash on the local bus
+ */
+#define CFG_NAND_BASE		0x60000000
+
+#define CFG_LBLAWBAR1_PRELIM	CFG_NAND_BASE
+#define CFG_LBLAWAR1_PRELIM	0x8000001b /* Access window size 4K */
+
+/* Port size 8 bit, UPMA */
+#define CFG_BR1_PRELIM		(CFG_NAND_BASE | 0x00000881)
+#define CFG_OR1_PRELIM		0xfc000001
+
+/*
+ * Fujitsu MB86277 (MINT) graphics controller
+ */
+#define CFG_VIDEO_BASE		0x70000000
+
+#define CFG_LBLAWBAR2_PRELIM	CFG_VIDEO_BASE
+#define CFG_LBLAWAR2_PRELIM	0x80000019 /* Access window size 64MB */
+
+/* Port size 32 bit, UPMB */
+#define CFG_BR2_PRELIM		(CFG_VIDEO_BASE | 0x000018a1) /* PS=11, UPMB */
+#define CFG_OR2_PRELIM		0xfc000001 /* (64MB, EAD=1) */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200,}
+
+#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* I2C */
+#define CONFIG_HARD_I2C		/* I2C with hardware support */
+#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CFG_I2C_SPEED	400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE	0x7F
+#define CFG_I2C_NOPROBES	{{0x52}} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET	0x3000
+#define CFG_I2C2_OFFSET 0x3100
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CONFIG_PCI
+#define CONFIG_83XX_GENERIC_PCI	1
+
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x10000000 /* 256M */
+#define CFG_PCI1_MMIO_BASE	0x90000000
+#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
+#define CFG_PCI1_MMIO_SIZE	0x10000000 /* 256M */
+#define CFG_PCI1_IO_BASE	0xE0300000
+#define CFG_PCI1_IO_PHYS	0xE0300000
+#define CFG_PCI1_IO_SIZE	0x100000 /* 1M */
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
+
+#endif	/* CONFIG_PCI */
+
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+/*
+ * QE UEC ethernet configuration
+ */
+#define CONFIG_UEC_ETH
+#define CONFIG_ETHPRIME		"Freescale GETH"
+
+#define CONFIG_UEC_ETH1		/* GETH1 */
+
+#ifdef CONFIG_UEC_ETH1
+#define CFG_UEC1_UCC_NUM	0	/* UCC1 */
+#define CFG_UEC1_RX_CLK		QE_CLK_NONE
+#define CFG_UEC1_TX_CLK		QE_CLK9
+#define CFG_UEC1_ETH_TYPE	GIGA_ETH
+#define CFG_UEC1_PHY_ADDR	2
+#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII
+#endif
+
+#define CONFIG_UEC_ETH2		/* GETH2 */
+
+#ifdef CONFIG_UEC_ETH2
+#define CFG_UEC2_UCC_NUM	1	/* UCC2 */
+#define CFG_UEC2_RX_CLK		QE_CLK_NONE
+#define CFG_UEC2_TX_CLK		QE_CLK4
+#define CFG_UEC2_ETH_TYPE	GIGA_ETH
+#define CFG_UEC2_PHY_ADDR	4
+#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII
+#endif
+
+/*
+ * Environment
+ */
+
+#ifndef CFG_RAMBOOT
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
+#define CFG_ENV_SIZE		0x20000
+#else /* CFG_RAMBOOT */
+#define CFG_NO_FLASH		1	/* Flash is not usable now */
+#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+#define CFG_ENV_SIZE		0x2000
+#endif /* CFG_RAMBOOT */
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ASKENV
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#endif
+
+#if defined(CFG_RAMBOOT)
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_LOADS
+#endif
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		/* undef to save memory */
+#define CFG_LOAD_ADDR		0x2000000 /* default load address */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+
+#if defined(CONFIG_CMD_KGDB)
+	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
+#else
+	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT		0x000000000
+#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2		HID2_HBE
+
+/*
+ * Cache Config
+ */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5 /*log base 2 of the above value */
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+
+/* IMMRBAR & PCI IO: cache-inhibit and guarded */
+#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+
+/* NAND: cache-inhibit and guarded */
+#define CFG_IBAT2L	(CFG_NAND_BASE | BATL_PP_10 | BATL_CACHEINHIBIT |\
+			 BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U	(CFG_NAND_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT3U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | \
+			 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U	CFG_IBAT3U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT4L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT4U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT4L	CFG_IBAT4L
+#define CFG_DBAT4U	CFG_IBAT4U
+
+#define CFG_IBAT5L	(CFG_VIDEO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | \
+			 BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U	(CFG_VIDEO_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L	(CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	(CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L	(CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \
+			 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U	(CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#else /* CONFIG_PCI */
+#define CFG_IBAT6L	(0)
+#define CFG_IBAT6U	(0)
+#define CFG_IBAT7L	(0)
+#define CFG_IBAT7U	(0)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#endif /* CONFIG_PCI */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02 /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_UEC_ETH)
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH2
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETHADDR	00:04:9f:ef:01:01
+#define CONFIG_ETH1ADDR	00:04:9f:ef:01:02
+#define CONFIG_ETH2ADDR	00:04:9f:ef:01:03
+#define CONFIG_ETH3ADDR	00:04:9f:ef:01:04
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_LOADADDR	a00000
+#define CONFIG_HOSTNAME	mpc8360erdk
+#define CONFIG_BOOTFILE	uImage
+
+#define CONFIG_IPADDR		10.0.0.99
+#define CONFIG_SERVERIP		10.0.0.2
+#define CONFIG_GATEWAYIP	10.0.0.2
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_ROOTPATH		/nfsroot/
+
+#define	CONFIG_BOOTDELAY 2	/* -1 disables auto-boot */
+#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+   "netdev=eth0\0"\
+   "consoledev=ttyS0\0"\
+   "loadaddr=a00000\0"\
+   "fdtaddr=900000\0"\
+   "bootfile=uImage\0"\
+   "fdtfile=dtb\0"\
+   "fsfile=fs\0"\
+   "ubootfile=u-boot.bin\0"\
+   "setbootargs=setenv bootargs console=$consoledev,$baudrate "\
+   		"$mtdparts panic=1\0"\
+   "adddhcpargs=setenv bootargs $bootargs ip=on\0"\
+   "addnfsargs=setenv bootargs $bootargs ip=$ipaddr:$serverip:"\
+   		"$gatewayip:$netmask:$hostname:$netdev:off "\
+   		"root=/dev/nfs rw nfsroot=$serverip:$rootpath\0"\
+   "tftp_get_uboot=tftp 100000 $ubootfile\0"\
+   "tftp_get_kernel=tftp $loadaddr $bootfile\0"\
+   "tftp_get_dtb=tftp $fdtaddr $fdtfile\0"\
+   "tftp_get_fs=tftp c00000 $fsfile\0"\
+   "nor_reflash=protect off ff800000 ff87ffff ; erase ff800000 ff87ffff ; "\
+   		"cp.b 100000 ff800000 $filesize\0"\
+   "boot_m=bootm $loadaddr - $fdtaddr\0"\
+   "dhcpboot=run setbootargs adddhcpargs tftp_get_kernel tftp_get_dtb "\
+   		"boot_m\0"\
+   "nfsboot=run setbootargs addnfsargs tftp_get_kernel tftp_get_dtb "\
+   		"boot_m\0"\
+   ""
+
+#define CONFIG_BOOTCOMMAND "run dhcpboot"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
new file mode 100644
index 0000000..2b84e9c
--- /dev/null
+++ b/include/configs/MPC837XEMDS.h
@@ -0,0 +1,598 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1 /* E300 family */
+#define CONFIG_MPC83XX		1 /* MPC83XX family */
+#define CONFIG_MPC837X		1 /* MPC837X CPU specific */
+#define CONFIG_MPC837XEMDS	1 /* MPC837XEMDS board specific */
+
+/*
+ * System Clock Setup
+ */
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_83XX_PCICLK	66000000 /* in HZ */
+#else
+#define CONFIG_83XX_CLKIN	66000000 /* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ	66000000
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ * if CLKIN is 66MHz, then
+ * CSB = 396MHz, CORE = 594MHz, DDRC = 396MHz, LBC = 396MHz
+ */
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_SVCOD_DIV_2 |\
+	HRCWL_CSB_TO_CLKIN_6X1 |\
+	HRCWL_CORE_TO_CSB_1_5X1)
+
+#ifdef CONFIG_PCISLAVE
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_AGENT |\
+	HRCWH_PCI1_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0XFFF00100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_RL_EXT_LEGACY |\
+	HRCWH_TSEC1M_IN_RGMII |\
+	HRCWH_TSEC2M_IN_RGMII |\
+	HRCWH_BIG_ENDIAN |\
+	HRCWH_LDP_CLEAR)
+#else
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_RL_EXT_LEGACY |\
+	HRCWH_TSEC1M_IN_RGMII |\
+	HRCWH_TSEC2M_IN_RGMII |\
+	HRCWH_BIG_ENDIAN |\
+	HRCWH_LDP_CLEAR)
+#endif
+
+/*
+ * eTSEC Clock Config
+ */
+#define CFG_SCCR_TSEC1CM	1	/* CSB:eTSEC1 = 1:1 */
+#define CFG_SCCR_TSEC2CM	1	/* CSB:eTSEC2 = 1:1 */
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH		0x00000000
+#define CFG_SICRL		0x00000000
+
+/*
+ * Output Buffer Impedance
+ */
+#define CFG_OBIR		0x31100000
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_R
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMR		0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE		0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE		CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
+#define CFG_DDR_SDRAM_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+#define CFG_83XX_DDR_USES_CS0
+#define CFG_DDRCDR_VALUE	0x80080001 /* ODT 150ohm on SoC */
+
+#undef CONFIG_DDR_ECC		/* support DDR ECC function */
+#undef CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
+
+#define CONFIG_SPD_EEPROM	/* Use SPD EEPROM for DDR setup */
+#define CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */
+
+#if defined(CONFIG_SPD_EEPROM)
+#define SPD_EEPROM_ADDRESS	0x51 /* I2C address of DDR SODIMM SPD */
+#else
+/*
+ * Manually set up DDR parameters
+ * WHITE ELECTRONIC DESIGNS - W3HG64M72EEU403PD4 SO-DIMM
+ * consist of nine chips from SAMSUNG K4T51083QE-ZC(L)D5
+ */
+#define CFG_DDR_SIZE		512 /* MB */
+#define CFG_DDR_CS0_BNDS	0x0000001f
+#define CFG_DDR_CS0_CONFIG	( CSCONFIG_EN \
+				| 0x00010000  /* ODT_WR to CSn */ \
+				| CSCONFIG_ROW_BIT_14 | CSCONFIG_COL_BIT_10 )
+				/* 0x80010202 */
+#define CFG_DDR_TIMING_3	0x00000000
+#define CFG_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_WRT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_RRT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_WWT_SHIFT ) \
+				| ( 6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
+				| ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
+				| ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
+				| ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
+				/* 0x00620802 */
+#define CFG_DDR_TIMING_1	( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
+				| ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
+				| ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
+				| ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
+				| (13 << TIMING_CFG1_REFREC_SHIFT ) \
+				| ( 3 << TIMING_CFG1_WRREC_SHIFT ) \
+				| ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
+				| ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
+				/* 0x3935d322 */
+#define CFG_DDR_TIMING_2	( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+				| ( 6 << TIMING_CFG2_CPO_SHIFT ) \
+				| ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
+				| ( 4 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
+				| ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
+				| ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
+				| ( 8 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+				/* 0x131088c8 */
+#define CFG_DDR_INTERVAL	( ( 0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+				| ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
+				/* 0x03E00100 */
+#define CFG_DDR_SDRAM_CFG	0x43000000
+#define CFG_DDR_SDRAM_CFG2	0x00001000 /* 1 posted refresh */
+#define CFG_DDR_MODE		( ( 0x0448 << SDRAM_MODE_ESD_SHIFT ) \
+				| ( 0x1432 << SDRAM_MODE_SD_SHIFT ) )
+				/* ODT 150ohm CL=3, AL=1 on SDRAM */
+#define CFG_DDR_MODE2		0x00000000
+#endif
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST		/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00040000 /* memtest region */
+#define CFG_MEMTEST_END		0x00140000
+
+/*
+ * The reserved memory
+ */
+#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
+#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(512 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END	0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE	0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_8)
+#define CFG_LBC_LBCR		0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE		32 /* max FLASH size is 32M */
+
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
+
+#define CFG_BR0_PRELIM		( CFG_FLASH_BASE	/* Flash Base address */ \
+				| (2 << BR_PS_SHIFT)	/* 16 bit port size */ \
+				| BR_V )		/* valid */
+#define CFG_OR0_PRELIM		( (~(CFG_FLASH_SIZE - 1) << 20) \
+				| OR_UPM_XAM \
+				| OR_GPCM_CSNT \
+				| OR_GPCM_ACS_0b11 \
+				| OR_GPCM_XACS \
+				| OR_GPCM_SCY_15 \
+				| OR_GPCM_TRLX \
+				| OR_GPCM_EHTR \
+				| OR_GPCM_EAD )
+				/* 0xFE000FF7 */
+
+#define CFG_MAX_FLASH_BANKS	1 /* number of banks */
+#define CFG_MAX_FLASH_SECT	256 /* max sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500 /* Flash Write Timeout (ms) */
+
+/*
+ * BCSR on the Local Bus
+ */
+#define CFG_BCSR		0xF8000000
+#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR /* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM	0x8000000E /* Access window size 32K */
+
+#define CFG_BR1_PRELIM		(CFG_BCSR | 0x00000801) /* Port size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM		0xFFFFE9f7 /* length 32K */
+
+/*
+ * NAND Flash on the Local Bus
+ */
+#define CFG_NAND_BASE		0xE0600000	/* 0xE0600000 */
+#define CFG_BR3_PRELIM		( CFG_NAND_BASE \
+				| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
+				| BR_PS_8		/* Port Size = 8 bit */ \
+				| BR_MS_FCM		/* MSEL = FCM */ \
+				| BR_V )		/* valid */
+#define CFG_OR3_PRELIM		( 0xFFFF8000		/* length 32K */ \
+				| OR_FCM_CSCT \
+				| OR_FCM_CST \
+				| OR_FCM_CHT \
+				| OR_FCM_SCY_1 \
+				| OR_FCM_TRLX \
+				| OR_FCM_EHTR )
+				/* 0xFFFF8396 */
+
+#define CFG_LBLAWBAR3_PRELIM	CFG_NAND_BASE
+#define CFG_LBLAWAR3_PRELIM	0x8000000E	/* 32KB  */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
+
+/* I2C */
+#define CONFIG_HARD_I2C		/* I2C with hardware support */
+#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CFG_I2C_SPEED		400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
+#define CFG_I2C2_OFFSET		0x3100
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374	/* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR	0x68 /* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI_MEM_BASE	0x80000000
+#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE	0x10000000 /* 256M */
+#define CFG_PCI_MMIO_BASE	0x90000000
+#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE	0x10000000 /* 256M */
+#define CFG_PCI_IO_BASE		0xE0300000
+#define CFG_PCI_IO_PHYS		0xE0300000
+#define CFG_PCI_IO_SIZE		0x100000 /* 1M */
+
+#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
+#define CFG_PCI_SLV_MEM_BUS	0x00000000
+#define CFG_PCI_SLV_MEM_SIZE	0x80000000
+
+#ifdef CONFIG_PCI
+#define CONFIG_83XX_GENERIC_PCI	1 /* Use generic PCI setup */
+#define CONFIG_PQ_MDS_PIB	1 /* PQ MDS Platform IO Board */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
+#endif /* CONFIG_PCI */
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+/*
+ * TSEC
+ */
+#define CONFIG_TSEC_ENET	/* TSEC ethernet support */
+#define CFG_TSEC1_OFFSET	0x24000
+#define CFG_TSEC1		(CFG_IMMR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC2_OFFSET	0x25000
+#define CFG_TSEC2		(CFG_IMMR+CFG_TSEC2_OFFSET)
+
+/*
+ * TSEC ethernet configuration
+ */
+#define CONFIG_MII		1 /* MII PHY management */
+#define CONFIG_TSEC1		1
+#define CONFIG_TSEC1_NAME	"eTSEC0"
+#define CONFIG_TSEC2		1
+#define CONFIG_TSEC2_NAME	"eTSEC1"
+#define TSEC1_PHY_ADDR		2
+#define TSEC2_PHY_ADDR		3
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME		"eTSEC1"
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+	#define CFG_ENV_IS_IN_FLASH	1
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+	#define CFG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
+	#define CFG_ENV_SIZE		0x2000
+#else
+	#define CFG_NO_FLASH		1	/* Flash is not usable now */
+	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+	#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
+#if defined(CFG_RAMBOOT)
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
+#endif
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		/* undef to save memory */
+#define CFG_LOAD_ADDR		0x2000000 /* default load address */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+
+#if defined(CONFIG_CMD_KGDB)
+	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
+#else
+	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT		0x000000000
+#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2		HID2_HBE
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_SDRAM_LOWER		CFG_SDRAM_BASE
+#define CFG_SDRAM_UPPER		(CFG_SDRAM_BASE + 0x10000000)
+
+#define CFG_IBAT0L	(CFG_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+
+#define CFG_IBAT1L	(CFG_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U	(CFG_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+
+/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
+#define CFG_IBAT2L	(CFG_IMMR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U	(CFG_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+
+/* BCSR: cache-inhibit and guarded */
+#define CFG_IBAT3L	(CFG_BCSR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT3U	(CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT3L	CFG_IBAT3L
+#define CFG_DBAT3U	CFG_IBAT3U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT4L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT4U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT4L	(CFG_FLASH_BASE | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT4U	CFG_IBAT4U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#else
+#define CFG_IBAT6L	(0)
+#define CFG_IBAT6U	(0)
+#define CFG_IBAT7L	(0)
+#define CFG_IBAT7U	(0)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02 /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR		00:E0:0C:00:83:79
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR		00:E0:0C:00:83:78
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_LOADADDR 200000	/* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6	/* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+   "netdev=eth0\0"							\
+   "consoledev=ttyS0\0"							\
+   "ramdiskaddr=1000000\0"						\
+   "ramdiskfile=ramfs.83xx\0"						\
+   "fdtaddr=400000\0"							\
+   "fdtfile=mpc837xemds.dtb\0"						\
+   ""
+
+#define CONFIG_NFSBOOTCOMMAND						\
+   "setenv bootargs root=/dev/nfs rw "					\
+      "nfsroot=$serverip:$rootpath "					\
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND						\
+   "setenv bootargs root=/dev/ram rw "					\
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $ramdiskaddr $ramdiskfile;"					\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 35e1d63..afce7fb 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -460,13 +460,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index e376c11..2868dcb 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -319,13 +319,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux */
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE	32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index d2e7237..c83382f 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -450,13 +450,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE	32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 545a76c..5a96db5 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -444,13 +444,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 3f382e5..90beb25 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -512,13 +512,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE	32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 90ef3d6..76d673c 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -450,13 +450,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE	32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index d4e0de0..5f10555 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -490,13 +490,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 59f490e..2b089d9 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -480,13 +480,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE	32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
new file mode 100644
index 0000000..eb6ccb6
--- /dev/null
+++ b/include/configs/MPC8610HPCD.h
@@ -0,0 +1,682 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+/*
+ * MPC8610HPCD board configuration file
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_MPC86xx		1	/* MPC86xx */
+#define CONFIG_MPC8610		1	/* MPC8610 specific */
+#define CONFIG_MPC8610HPCD	1	/* MPC8610HPCD board specific */
+#define CONFIG_NUM_CPUS		1	/* Number of CPUs in the system */
+#define CONFIG_LINUX_RESET_VEC	0x100	/* Reset vector used by Linux */
+
+#define CONFIG_FSL_DIU_FB	1	/* FSL DIU */
+
+/* video */
+#define CONFIG_VIDEO
+
+#if defined(CONFIG_VIDEO)
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#endif
+
+#ifdef RUN_DIAG
+#define CFG_DIAG_ADDR		0xff800000
+#endif
+
+#define CFG_RESET_ADDRESS	0xfff00100
+
+#define CONFIG_PCI		1	/* Enable PCI/PCIE*/
+#define CONFIG_PCI1		1	/* PCI controler 1 */
+#define CONFIG_PCIE1		1	/* PCIe 1 connected to ULI bridge */
+#define CONFIG_PCIE2		1	/* PCIe 2 connected to slot */
+#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_SPD_EEPROM		/* Use SPD for DDR */
+#undef CONFIG_DDR_DLL			/* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+#undef  CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
+
+#define CONFIG_ALTIVEC		1
+
+/*
+ * L2CR setup -- make sure this is right for your board!
+ */
+#define CFG_L2
+#define L2_INIT		0
+#define L2_ENABLE	(L2CR_L2E |0x00100000 )
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0)
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+#define CONFIG_MISC_INIT_R		1
+
+#undef	CFG_DRAM_TEST			/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00200000	/* memtest region */
+#define CFG_MEMTEST_END		0x00400000
+#define CFG_ALT_MEMTEST
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+
+#define CFG_PCI1_ADDR		(CFG_CCSRBAR+0x8000)
+#define CFG_PCIE1_ADDR		(CFG_CCSRBAR+0xa000)
+#define CFG_PCIE2_ADDR		(CFG_CCSRBAR+0x9000)
+
+#define CFG_DIU_ADDR		(CFG_CCSRBAR+0x2c000)
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_VERY_BIG_RAM
+
+#define MPC86xx_DDR_SDRAM_CLK_CNTL
+
+#if defined(CONFIG_SPD_EEPROM)
+/*
+ * Determine DDR configuration from I2C interface.
+ */
+#define SPD_EEPROM_ADDRESS1		0x51		/* DDR DIMM */
+#else
+/*
+ * Manually set up DDR1 parameters
+ */
+
+#define CFG_SDRAM_SIZE	256		/* DDR is 256MB */
+
+#if 0 /* TODO */
+#define CFG_DDR_CS0_BNDS	0x0000000F
+#define CFG_DDR_CS0_CONFIG	0x80010202	/* Enable, no interleaving */
+#define CFG_DDR_EXT_REFRESH	0x00000000
+#define CFG_DDR_TIMING_0	0x00260802
+#define CFG_DDR_TIMING_1	0x3935d322
+#define CFG_DDR_TIMING_2	0x14904cc8
+#define CFG_DDR_MODE_1		0x00480432
+#define CFG_DDR_MODE_2		0x00000000
+#define CFG_DDR_INTERVAL	0x06180100
+#define CFG_DDR_DATA_INIT	0xdeadbeef
+#define CFG_DDR_CLK_CTRL	0x03800000
+#define CFG_DDR_OCD_CTRL	0x00000000
+#define CFG_DDR_OCD_STATUS	0x00000000
+#define CFG_DDR_CONTROL		0xe3008000	/* Type = DDR2 */
+#define CFG_DDR_CONTROL2	0x04400010
+
+#define CFG_DDR_ERR_INT_EN	0x00000000
+#define CFG_DDR_ERR_DIS		0x00000000
+#define CFG_DDR_SBE		0x000f0000
+ /* Not used in fixed_sdram function */
+#define CFG_DDR_MODE		0x00000022
+#define CFG_DDR_CS1_BNDS	0x00000000
+#define CFG_DDR_CS2_BNDS	0x00000FFF	/* Not done */
+#define CFG_DDR_CS3_BNDS	0x00000FFF	/* Not done */
+#define CFG_DDR_CS4_BNDS	0x00000FFF	/* Not done */
+#define CFG_DDR_CS5_BNDS	0x00000FFF	/* Not done */
+#endif
+#endif
+
+#define CFG_ID_EEPROM
+#define ID_EEPROM_ADDR		0x57
+
+
+#define CFG_FLASH_BASE		0xf0000000 /* start of FLASH 128M */
+#define CFG_FLASH_BASE2		0xf8000000
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
+
+#define CFG_BR0_PRELIM		0xf8001001 /* port size 16bit */
+#define CFG_OR0_PRELIM		0xf8006e65 /* 128MB NOR Flash*/
+
+#define CFG_BR1_PRELIM		0xf0001001 /* port size 16bit */
+#define CFG_OR1_PRELIM		0xf8006e65 /* 128MB Promjet */
+#if 0 /* TODO */
+#define CFG_BR2_PRELIM		0xf0000000
+#define CFG_OR2_PRELIM		0xf0000000 /* 256MB NAND Flash - bank 1 */
+#endif
+#define CFG_BR3_PRELIM		0xe8000801 /* port size 8bit */
+#define CFG_OR3_PRELIM		0xfff06ff7 /* 1MB PIXIS area*/
+
+
+#define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
+#define PIXIS_BASE	0xe8000000	/* PIXIS registers */
+#define PIXIS_ID		0x0	/* Board ID at offset 0 */
+#define PIXIS_VER		0x1	/* Board version at offset 1 */
+#define PIXIS_PVER		0x2	/* PIXIS FPGA version at offset 2 */
+#define PIXIS_RST		0x4	/* PIXIS Reset Control register */
+#define PIXIS_AUX		0x6	/* PIXIS Auxiliary register; Scratch */
+#define PIXIS_SPD		0x7	/* Register for SYSCLK speed */
+#define PIXIS_BRDCFG0		0x8	/* PIXIS Board Configuration Register0*/
+#define PIXIS_VCTL		0x10	/* VELA Control Register */
+#define PIXIS_VCFGEN0		0x12	/* VELA Config Enable 0 */
+#define PIXIS_VCFGEN1		0x13	/* VELA Config Enable 1 */
+#define PIXIS_VBOOT		0x16	/* VELA VBOOT Register */
+#define PIXIS_VSPEED0		0x17	/* VELA VSpeed 0 */
+#define PIXIS_VSPEED1		0x18	/* VELA VSpeed 1 */
+#define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
+#define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
+#define CFG_PIXIS_VBOOT_MASK	0x0C    /* Reset altbank mask*/
+
+#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
+#define CFG_MAX_FLASH_SECT	1024		/* sectors per device */
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef	CFG_RAMBOOT
+#endif
+
+#if defined(CFG_RAMBOOT)
+#undef CONFIG_SPD_EEPROM
+#define CFG_SDRAM_SIZE	256
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK	1
+#ifndef CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#else
+#define CFG_INIT_RAM_ADDR	0xe4000000	/* Initial RAM address */
+#endif
+#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 KB for Mon */
+#define CFG_MALLOC_LEN		(6 * 1024 * 1024)	/* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/*
+ * Pass open firmware flat tree to kernel
+ */
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
+
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define CFG_64BIT_VSPRINTF	1
+#define CFG_64BIT_STRTOUL	1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe1000000
+#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS	0x00000000
+#define CFG_PCI_MEMORY_PHYS	0x00000000
+#define CFG_PCI_MEMORY_SIZE	0x80000000
+
+/* For RTL8139 */
+#define KSEG1ADDR(x)	({u32 _x = le32_to_cpu(*(u32 *)(x)); (&_x); })
+#define _IO_BASE		0x00000000
+
+/* controller 1, Base address 0xa000 */
+#define CFG_PCIE1_MEM_BASE	0xa0000000
+#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCIE1_IO_BASE	0x00000000
+#define CFG_PCIE1_IO_PHYS	0xe3000000
+#define CFG_PCIE1_IO_SIZE	0x00100000	/* 1M */
+
+/* controller 2, Base Address 0x9000 */
+#define CFG_PCIE2_MEM_BASE	0x90000000
+#define CFG_PCIE2_MEM_PHYS	CFG_PCIE2_MEM_BASE
+#define CFG_PCIE2_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCIE2_IO_BASE	0x00000000	/* reuse mem LAW */
+#define CFG_PCIE2_IO_PHYS	0xe2000000
+#define CFG_PCIE2_IO_SIZE	0x00100000	/* 1M */
+
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_CMD_NET
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+#define CONFIG_RTL8139
+#define CONFIG_SK98
+#define CONFIG_EEPRO100
+#define CONFIG_TULIP
+#ifdef CONFIG_TULIP
+#define CONFIG_ETHADDR   00:E0:0C:00:00:01
+#endif
+
+/************************************************************
+ * USB support
+ ************************************************************/
+#define CONFIG_PCI_OHCI		1
+#define CONFIG_USB_OHCI_NEW		1
+#define CONFIG_USB_KEYBOARD	1
+#define CFG_DEVICE_DEREGISTER
+#define CFG_USB_EVENT_POLL	1
+#define CFG_USB_OHCI_SLOT_NAME 	"ohci_pci"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+#define CFG_OHCI_SWAP_REG_ACCESS	1
+
+#if !defined(CONFIG_PCI_PNP)
+#define PCI_ENET0_IOADDR	0xe0000000
+#define PCI_ENET0_MEMADDR	0xe0000000
+#define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
+#endif
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SCSI_AHCI
+
+#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_SATA_ULI5288
+#define CFG_SCSI_MAX_SCSI_ID	4
+#define CFG_SCSI_MAX_LUN	1
+#define CFG_SCSI_MAX_DEVICE	(CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAXDEVICE	CFG_SCSI_MAX_DEVICE
+#endif
+
+#endif	/* CONFIG_PCI */
+
+/*
+ * BAT0		2G	Cacheable, non-guarded
+ * 0x0000_0000	2G	DDR
+ */
+#define CFG_DBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT0U	(BATU_BL_2G | BATU_VS | BATU_VP)
+#define CFG_IBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE )
+#define CFG_IBAT0U	CFG_DBAT0U
+
+/*
+ * BAT1		1G	Cache-inhibited, guarded
+ * 0x8000_0000	256M	PCI-1 Memory
+ * 0xa000_0000	256M	PCI-Express 1 Memory
+ * 0x9000_0000	256M	PCI-Express 2 Memory
+ */
+
+#define CFG_DBAT1L	(CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT1U	(CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP)
+#define CFG_IBAT1L	(CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT1U	CFG_DBAT1U
+
+/*
+ * BAT2		16M	Cache-inhibited, guarded
+ * 0xe100_0000	1M	PCI-1 I/O
+ */
+
+#define CFG_DBAT2L	(CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U	(CFG_PCI1_IO_PHYS | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L	(CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U	CFG_DBAT2U
+
+/*
+ * BAT3		32M	Cache-inhibited, guarded
+ * 0xe200_0000	1M	PCI-Express 2 I/O
+ * 0xe300_0000	1M	PCI-Express 1 I/O
+ */
+
+#define CFG_DBAT3L	(CFG_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U	(CFG_PCIE2_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_IBAT3L	(CFG_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U	CFG_DBAT3U
+
+/*
+ * BAT4		4M	Cache-inhibited, guarded
+ * 0xe000_0000	4M	CCSR
+ */
+#define CFG_DBAT4L	(CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT4U	(CFG_CCSRBAR | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L	(CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT4U	CFG_DBAT4U
+
+/*
+ * BAT5		128K	Cacheable, non-guarded
+ * 0xe400_0000	128K	Init RAM for stack in the CPU DCache (no backing memory)
+ */
+#define CFG_DBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_IBAT5L	CFG_DBAT5L
+#define CFG_IBAT5U	CFG_DBAT5U
+
+/*
+ * BAT6		256M	Cache-inhibited, guarded
+ * 0xf000_0000	256M	FLASH
+ */
+#define CFG_DBAT6L	(CFG_FLASH_BASE	 | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT6U	(CFG_FLASH_BASE	 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT6L	(CFG_FLASH_BASE | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	CFG_DBAT6U
+
+/*
+ * BAT7		4M	Cache-inhibited, guarded
+ * 0xe800_0000	4M	PIXIS
+ */
+#define CFG_DBAT7L	(PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT7U	(PIXIS_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CFG_IBAT7L	(PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT7U	CFG_DBAT7U
+
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_ENV_SECT_SIZE	0x20000	/* 126k (one sector) for env */
+#define CFG_ENV_SIZE		0x2000
+#else
+#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
+#if defined(CFG_RAMBOOT)
+#undef CONFIG_CMD_ENV
+#endif
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_USB
+#endif
+
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*DIU Configuration*/
+#define DIU_CONNECT_TO_DVI		/* DIU controller connects to DVI encoder*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_IPADDR		192.168.1.100
+
+#define CONFIG_HOSTNAME		unknown
+#define CONFIG_ROOTPATH		/opt/nfsroot
+#define CONFIG_BOOTFILE		uImage
+#define CONFIG_UBOOTPATH	8610hpcd/u-boot.bin
+
+#define CONFIG_SERVERIP		192.168.1.1
+#define CONFIG_GATEWAYIP	192.168.1.1
+#define CONFIG_NETMASK		255.255.255.0
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR		1000000
+
+#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
+#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE	115200
+
+#if defined(CONFIG_PCI1)
+#define PCI_ENV \
+ "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
+	"echo e;md ${a}e00 9\0" \
+ "pci1regs=setenv a e0008; run pcireg\0" \
+ "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
+	"pci d.w $b.0 56 1\0" \
+ "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \
+	"pci w.w $b.0 56 ffff\0"	\
+ "pci1err=setenv a e0008; run pcierr\0"	\
+ "pci1errc=setenv a e0008; run pcierrc\0"
+#else
+#define	PCI_ENV ""
+#endif
+
+#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2)
+#define PCIE_ENV \
+ "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
+	"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
+ "pcie1regs=setenv a e000a; run pciereg\0"	\
+ "pcie2regs=setenv a e0009; run pciereg\0"	\
+ "pcieerr=md ${a}020 1; md ${a}e00; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;"\
+	"pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;"	\
+	"pci d $b.0 130 1\0" \
+ "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;"\
+	"pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;" \
+	"pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0"		\
+ "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0"	\
+ "pcie1err=setenv a e000a; run pcieerr\0"	\
+ "pcie2err=setenv a e0009; run pcieerr\0"	\
+ "pcie1errc=setenv a e000a; run pcieerrc\0"	\
+ "pcie2errc=setenv a e0009; run pcieerrc\0"
+#else
+#define	PCIE_ENV ""
+#endif
+
+#define DMA_ENV \
+ "dma0=mw ${d}104 ffffffff;mw ${d}110 50000;mw ${d}114 $sad0;mw ${d}118 50000;"\
+	"mw ${d}120 $bc0;mw ${d}100 f03c404; mw ${d}11c $dad0; md ${d}100 9\0" \
+ "dma1=mw ${d}184 ffffffff;mw ${d}190 50000;mw ${d}194 $sad1;mw ${d}198 50000;"\
+	"mw ${d}1a0 $bc1;mw ${d}180 f03c404; mw ${d}19c $dad1; md ${d}180 9\0" \
+ "dma2=mw ${d}204 ffffffff;mw ${d}210 50000;mw ${d}214 $sad2;mw ${d}218 50000;"\
+	"mw ${d}220 $bc2;mw ${d}200 f03c404; mw ${d}21c $dad2; md ${d}200 9\0" \
+ "dma3=mw ${d}284 ffffffff;mw ${d}290 50000;mw ${d}294 $sad3;mw ${d}298 50000;"\
+	"mw ${d}2a0 $bc3;mw ${d}280 f03c404; mw ${d}29c $dad3; md ${d}280 9\0"
+
+#ifdef ENV_DEBUG
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+ "netdev=eth0\0"						\
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
+ "tftpflash=tftpboot $loadaddr $uboot; "			\
+	"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
+	"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
+	"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
+	"protect on " MK_STR(TEXT_BASE) " +$filesize; "	\
+	"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
+ "consoledev=ttyS0\0"						\
+ "ramdiskaddr=2000000\0"					\
+ "ramdiskfile=8610hpcd/ramdisk.uboot\0"				\
+ "fdtaddr=c00000\0"						\
+ "fdtfile=8610hpcd/mpc8610_hpcd.dtb\0"				\
+ "bdev=sda3\0"					\
+ "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
+ "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
+ "maxcpus=1"	\
+ "eoi=mw e00400b0 0\0"						\
+ "iack=md e00400a0 1\0"						\
+ "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4;" \
+	"md ${a}bf0 4; md ${a}e00 3; md ${a}e20 3; md ${a}e40 7;" \
+	"md ${a}f00 5\0" \
+ "ddr1regs=setenv a e0002; run ddrreg\0" \
+ "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}800 1;" \
+	"md ${a}900 6; md ${a}a00 1; md ${a}b20 3; md ${a}e00 1;" \
+	"md ${a}e60 1; md ${a}ef0 1d\0" \
+ "guregs=setenv a e00e0; run gureg\0" \
+ "mcmreg=md ${a}000 1b; md ${a}bf8 2; md ${a}e00 5\0" \
+ "mcmregs=setenv a e0001; run mcmreg\0" \
+ "diuregs=md e002c000 1d\0" \
+ "dium=mw e002c01c\0" \
+ "diuerr=md e002c014 1\0" \
+ "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0 debug\0" \
+ "monitor=0-DVI\0" \
+ "pmregs=md e00e1000 2b\0" \
+ "lawregs=md e0000c08 4b\0" \
+ "lbcregs=md e0005000 36\0" \
+ "dma0regs=md e0021100 12\0" \
+ "dma1regs=md e0021180 12\0" \
+ "dma2regs=md e0021200 12\0" \
+ "dma3regs=md e0021280 12\0" \
+ PCI_ENV \
+ PCIE_ENV \
+ DMA_ENV
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS                               \
+ "netdev=eth0\0"                                                \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                         \
+ "consoledev=ttyS0\0"                                           \
+ "ramdiskaddr=2000000\0"                                        \
+ "ramdiskfile=8610hpcd/ramdisk.uboot\0"                         \
+ "fdtaddr=c00000\0"                                             \
+ "fdtfile=8610hpcd/mpc8610_hpcd.dtb\0"                          \
+ "bdev=sda3\0"							\
+ "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0\0"\
+ "monitor=0-DVI\0"
+#endif
+
+#define CONFIG_NFSBOOTCOMMAND					\
+ "setenv bootargs root=/dev/nfs rw "				\
+	"nfsroot=$serverip:$rootpath "				\
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+	"console=$consoledev,$baudrate $othbootargs;"		\
+ "tftp $loadaddr $bootfile;"					\
+ "tftp $fdtaddr $fdtfile;"					\
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw "				\
+	"console=$consoledev,$baudrate $othbootargs;"		\
+ "tftp $ramdiskaddr $ramdiskfile;"				\
+ "tftp $loadaddr $bootfile;"					\
+ "tftp $fdtaddr $fdtfile;"					\
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND		\
+ "setenv bootargs root=/dev/$bdev rw "	\
+	"console=$consoledev,$baudrate $othbootargs;"	\
+ "tftp $loadaddr $bootfile;"		\
+ "tftp $fdtaddr $fdtfile;"		\
+ "bootm $loadaddr - $fdtaddr"
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 6f87240..7f485c6 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -38,7 +38,6 @@
 #define CONFIG_MPC8641HPCN	1	/* MPC8641HPCN board specific */
 #define CONFIG_NUM_CPUS         2       /* Number of CPUs in the system */
 #define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
-#undef DEBUG
 
 #ifdef RUN_DIAG
 #define CFG_DIAG_ADDR        0xff800000
@@ -267,13 +266,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Pass open firmware flat tree to kernel
  */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define OF_CPU		"PowerPC,8641@0"
-#define OF_SOC		"soc8641@f8000000"
-#define OF_TBCLK	(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH	"/soc8641@f8000000/serial@4500"
 
 #define CFG_64BIT_VSPRINTF	1
 #define CFG_64BIT_STRTOUL	1
@@ -577,13 +573,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-    #define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
@@ -645,8 +634,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
    "consoledev=ttyS0\0"                                                 \
    "ramdiskaddr=2000000\0"						\
    "ramdiskfile=your.ramdisk.u-boot\0"                                  \
-   "dtbaddr=c00000\0"						\
-   "dtbfile=mpc8641_hpcn.dtb\0"                                  \
+   "fdtaddr=c00000\0"						\
+   "fdtfile=mpc8641_hpcn.dtb\0"                                  \
    "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
    "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
    "maxcpus=2"
@@ -658,16 +647,16 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $loadaddr $bootfile;"                                          \
-   "tftp $dtbaddr $dtbfile;"                                          \
-   "bootm $loadaddr - $dtbaddr"
+   "tftp $fdtaddr $fdtfile;"                                          \
+   "bootm $loadaddr - $fdtaddr"
 
 #define CONFIG_RAMBOOTCOMMAND \
    "setenv bootargs root=/dev/ram rw "                                  \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $ramdiskaddr $ramdiskfile;"                                    \
    "tftp $loadaddr $bootfile;"                                          \
-   "tftp $dtbaddr $dtbfile;"                                          \
-   "bootm $loadaddr $ramdiskaddr $dtbaddr"
+   "tftp $fdtaddr $fdtfile;"                                          \
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
 #define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
 
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index 5840ea2..94b5bc9 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -222,15 +222,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index 937df22..4e03088 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -220,15 +220,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index d6e7082..e70c0d3 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -251,15 +251,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index efa0157..b83520d 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -231,15 +231,6 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  */
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 652210c..0bd77c0 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -288,6 +288,7 @@
 #define CFG_I2C_SLAVE		0x7F
 
 #define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
+#define CFG_EEPROM_WREN         1
 
 /* CAT24WC08/16... */
 #define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
@@ -300,16 +301,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
@@ -389,15 +380,16 @@
  * GPIO0[28-29] - UART1 data signal input/output
  * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
  */
-#define CFG_GPIO0_OSRH		0x40000550
+#define CFG_GPIO0_OSRH		0x00000550
 #define CFG_GPIO0_OSRL		0x00000110
 #define CFG_GPIO0_ISR1H		0x00000000
 #define CFG_GPIO0_ISR1L		0x15555445
 #define CFG_GPIO0_TSRH		0x00000000
 #define CFG_GPIO0_TSRL		0x00000000
-#define CFG_GPIO0_TCR		0xF7FE0014
+#define CFG_GPIO0_TCR		0x77FE0014
 
 #define CFG_DUART_RST		(0x80000000 >> 14)
+#define CFG_EEPROM_WP		(0x80000000 >> 0)
 
 /*
  * Internal Definitions
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index a6a1e73..f0d0399 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -366,13 +366,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/PM856.h b/include/configs/PM856.h
index 9a17e3d..ae2645c 100644
--- a/include/configs/PM856.h
+++ b/include/configs/PM856.h
@@ -365,13 +365,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index b29f368..adbe8a9 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -270,16 +270,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 #define FLASH0_BA	0xFF000000	    /* FLASH 0 Base Address		*/
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
new file mode 100644
index 0000000..67bf4b1
--- /dev/null
+++ b/include/configs/PMC440.h
@@ -0,0 +1,515 @@
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
+ * Based on the sequoia configuration file.
+ *
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * PMC440.h - configuration for esd PMC440 boards
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_440EPX		1	/* Specific PPC440EPx   */
+#define CONFIG_440		1	/* ... PPC440 family    */
+#define CONFIG_4xx		1	/* ... PPC4xx family    */
+
+#define CONFIG_SYS_CLK_FREQ	33333400
+
+#if 0 /* temporary disabled because OS/9 does not like dcache on startup */
+#define CONFIG_4xx_DCACHE		/* enable dcache        */
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R	1	/* Call misc_init_r     */
+#define CONFIG_BOARD_TYPES	1	/* support board types  */
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(384  * 1024)	/* Reserve 384 kB for Monitor   */
+#define CFG_MALLOC_LEN		(1024 * 1024)	/* Reserve 256 kB for malloc()  */
+
+#define CONFIG_PRAM		0	/* use pram variable to overwrite */
+
+#define CFG_BOOT_BASE_ADDR	0xf0000000
+#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0          */
+#define CFG_FLASH_BASE		0xfc000000	/* start of FLASH       */
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_NAND_ADDR		0xd0000000	/* NAND Flash           */
+#define CFG_OCM_BASE		0xe0010000	/* ocm                  */
+#define CFG_OCM_DATA_ADDR	CFG_OCM_BASE
+#define CFG_PCI_BASE		0xe0000000	/* Internal PCI regs    */
+#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory    */
+#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
+#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
+#define CFG_PCI_MEMSIZE		0x80000000	/* 2GB! */
+
+/* Don't change either of these */
+#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals */
+
+#define CFG_USB2D0_BASE		0xe0000100
+#define CFG_USB_DEVICE		0xe0000000
+#define CFG_USB_HOST		0xe0000400
+#define CFG_FPGA_BASE0		0xef000000	/* 32 bit */
+#define CFG_FPGA_BASE1		0xef100000	/* 16 bit */
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache	*/
+#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM                  */
+#define CFG_INIT_RAM_END	(4 << 10)
+#define CFG_GBL_DATA_SIZE	256	/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI	1
+#undef CONFIG_UART1_CONSOLE	/* console on front panel */
+
+#define CFG_BAUDRATE_TABLE						\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_ENV_IS_IN_EEPROM	1	/* use FLASH for environment vars */
+#else
+#define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars */
+#define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment */
+#endif
+
+/*-----------------------------------------------------------------------
+ * RTC
+ *----------------------------------------------------------------------*/
+#define CONFIG_RTC_RX8025
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI		/* The flash is CFI compatible  */
+#define CFG_FLASH_CFI_DRIVER	/* Use common CFI driver        */
+
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks           */
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip    */
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)      */
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)      */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)     */
+#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection        */
+
+#define CFG_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash        */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector          */
+#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector     */
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_OFFSET		0	/* environment starts at the beginning of the EEPROM */
+#define CFG_ENV_SIZE		0x1000	/* 4096 bytes may be used for env vars */
+#endif
+
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 4k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ * On 440EPx the SPL is copied to SDRAM before the NAND controller is
+ * set up. While still running from cache, I experienced problems accessing
+ * the NAND controller.	sr - 2006-08-25
+ */
+#if defined (CONFIG_NAND_U_BOOT)
+#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location                 */
+#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size                     */
+#define CFG_NAND_BOOT_SPL_DST	(CFG_OCM_BASE + (12 << 10)) /* Copy SPL here    */
+#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr        */
+#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST /* Start NUB from this addr */
+#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image   */
+#define CFG_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image     */
+
+/*
+ * Now the NAND chip has to be defined (no autodetection used!)
+ */
+#define CFG_NAND_PAGE_SIZE	512	/* NAND chip page size          */
+#define CFG_NAND_BLOCK_SIZE	(16 << 10) /* NAND chip block size      */
+#define CFG_NAND_PAGE_COUNT	32	/* NAND chip page count         */
+#define CFG_NAND_BAD_BLOCK_POS	5	/* Location of bad block marker */
+#undef CFG_NAND_4_ADDR_CYCLE		/* No fourth addr used (<=32MB) */
+
+#define CFG_NAND_ECCSIZE	256
+#define CFG_NAND_ECCBYTES	3
+#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+#define CFG_NAND_OOBSIZE	16
+#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+#define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
+#endif
+
+#ifdef CFG_ENV_IS_IN_NAND
+/*
+ * For NAND booting the environment is embedded in the U-Boot image. Please take
+ * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
+ */
+#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
+#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM	(256)	/* 256MB                        */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_DDR_DATA_EYE	/* use DDR2 optimization        */
+#endif
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support    */
+#undef	CONFIG_SOFT_I2C		/* I2C bit-banged               */
+#define CFG_I2C_SPEED		100000	/* I2C speed and slave address  */
+#define CFG_I2C_SLAVE		0x7F
+
+#define CONFIG_I2C_CMD_TREE	1
+#define CONFIG_I2C_MULTI_BUS	1
+
+#define CFG_I2C_MULTI_EEPROMS
+
+#define CFG_I2C_EEPROM_ADDR		0x54
+#define CFG_I2C_EEPROM_ADDR_LEN		2
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS	5
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x01
+
+#define CFG_EEPROM_WREN			1
+#define CFG_I2C_BOOT_EEPROM_ADDR	0x52
+
+/*
+ * standard dtt sensor configuration - bottom bit will determine local or
+ * remote sensor of the TMP401
+ */
+#define CONFIG_DTT_SENSORS		{ 0, 1 }
+
+/*
+ * The PMC440 uses a TI TMP401 temperature sensor. This part
+ * is basically compatible to the ADM1021 that is supported
+ * by U-Boot.
+ *
+ * - i2c addr 0x4c
+ * - conversion rate 0x02 = 0.25 conversions/second
+ * - ALERT ouput disabled
+ * - local temp sensor enabled, min set to 0 deg, max set to 70 deg
+ * - remote temp sensor enabled, min set to 0 deg, max set to 70 deg
+ */
+#define CONFIG_DTT_ADM1021
+#define CFG_DTT_ADM1021		{ { 0x4c, 0x02, 0, 1, 70, 0, 1, 70, 0} }
+
+#define CONFIG_PREBOOT		/* enable preboot variable */
+
+#undef	CONFIG_BOOTARGS
+
+/* Setup some board specific values for the default environment variables */
+#define CONFIG_HOSTNAME		pmc440
+#define CFG_BOOTFILE		"bootfile=/tftpboot/pmc440/uImage\0"
+#define CFG_ROOTPATH		"rootpath=/opt/eldk_410/ppc_4xx\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	CFG_BOOTFILE							\
+	CFG_ROOTPATH							\
+	"netdev=eth0\0"							\
+	"ethrotate=no\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+	"nfsroot=${serverip}:${rootpath}\0"				\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"		\
+	":${hostname}:${netdev}:off panic=1\0"				\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
+	"flash_nfs=run nfsargs addip addtty;"				\
+	"bootm ${kernel_addr}\0"					\
+	"flash_self=run ramargs addip addtty;"				\
+	"bootm ${kernel_addr} ${ramdisk_addr}\0"			\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+	"bootm\0"							\
+	"kernel_addr=FC000000\0"					\
+	"ramdisk_addr=FC180000\0"					\
+	"load=tftp 200000 /tftpboot/pmc440/u-boot.bin\0"		\
+	"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;"	\
+	"cp.b 200000 FFFA0000 60000\0"					\
+	""
+
+#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds     */
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download  */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change        */
+
+#define CONFIG_IBM_EMAC4_V4	1
+#define CONFIG_MII		1	/* MII PHY management           */
+#define CONFIG_PHY_ADDR		0	/* PHY address, See schematics  */
+
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NET_MULTI	1
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"   */
+#define CONFIG_PHY1_ADDR	1
+#define CONFIG_RESET_PHY_R	1
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_STORAGE
+#define CFG_OHCI_BE_CONTROLLER
+
+#define CFG_USB_OHCI_BOARD_INIT 1
+#define CFG_USB_OHCI_CPU_INIT	1
+#define CFG_USB_OHCI_REGS_BASE	CFG_USB_HOST
+#define CFG_USB_OHCI_SLOT_NAME	"ppc440"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+
+/* Comment this out to enable USB 1.1 device */
+#define USB_2_0_DEVICE
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
+/* POST support */
+#define CONFIG_POST		(CFG_POST_MEMORY |	\
+				 CFG_POST_CPU    |	\
+				 CFG_POST_UART   |	\
+				 CFG_POST_I2C    |	\
+				 CFG_POST_CACHE  |	\
+				 CFG_POST_FPU    |	\
+				 CFG_POST_ETHER  |	\
+				 CFG_POST_SPR)
+
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
+
+/* esd expects pram at end of physical memory.
+ * So no logbuffer at the moment.
+ */
+#if 0
+#define CONFIG_LOGBUFFER
+#endif
+#define CFG_POST_CACHE_ADDR	0x10000000	/* free virtual address     */
+
+#define CFG_CONSOLE_IS_IN_ENV	/* Otherwise it catches logbuffer as output */
+
+#define CONFIG_SUPPORT_VFAT
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP			/* undef to save memory         */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt       */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size      */
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size      */
+#endif
+#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS		16	/* max number of command args   */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on          */
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM       */
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address      */
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history     */
+#define CONFIG_LOOPW		1	/* enable loopw command         */
+#define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+#define CONFIG_AUTOBOOT_KEYED	1
+#define CONFIG_AUTOBOOT_PROMPT	"Press SPACE to abort autoboot in %d seconds\n"
+#undef CONFIG_AUTOBOOT_DELAY_STR
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI		/* include pci support          */
+#define CONFIG_PCI_PNP		/* do (not) pci plug-and-play   */
+#define CFG_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP   */
+#define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup  */
+#define CFG_PCI_TARGBASE	0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+/* PCI identification */
+#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh      */
+#define CFG_PCI_SUBSYS_ID_NONMONARCH 0x0441	/* PCI Device ID: Non-Monarch */
+#define CFG_PCI_SUBSYS_ID_MONARCH 0x0440	/* PCI Device ID: Monarch */
+#define CFG_PCI_CLASSCODE_NONMONARCH	PCI_CLASS_PROCESSOR_POWERPC
+#define CFG_PCI_CLASSCODE_MONARCH	PCI_CLASS_BRIDGE_HOST
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FPGA stuff
+ *----------------------------------------------------------------------*/
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN2
+#define CONFIG_FPGA_SPARTAN3
+
+#define CONFIG_FPGA_COUNT	2
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+
+/*
+ * On Sequoia CS0 and CS3 are switched when configuring for NAND booting
+ */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_NAND_CS		2	/* NAND chip connected to CSx   */
+
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CFG_EBC_PB0AP		0x03017200
+#define CFG_EBC_PB0CR		(CFG_FLASH_BASE | 0xda000)
+
+/* Memory Bank 2 (NAND-FLASH) initialization */
+#define CFG_EBC_PB2AP		0x018003c0
+#define CFG_EBC_PB2CR		(CFG_NAND_ADDR | 0x1c000)
+#else
+#define CFG_NAND_CS		0	/* NAND chip connected to CSx   */
+/* Memory Bank 2 (NOR-FLASH) initialization */
+#define CFG_EBC_PB2AP		0x03017200
+#define CFG_EBC_PB2CR		(CFG_FLASH_BASE | 0xda000)
+
+/* Memory Bank 0 (NAND-FLASH) initialization */
+#define CFG_EBC_PB0AP		0x018003c0
+#define CFG_EBC_PB0CR		(CFG_NAND_ADDR | 0x1c000)
+#endif
+
+/* Memory Bank 4 (FPGA / 32Bit) initialization */
+#define CFG_EBC_PB4AP		0x03840f40	/* BME=0,TWT=7,CSN=1,TH=7,RE=1,SOR=0,BEM=1 */
+#define CFG_EBC_PB4CR		(CFG_FPGA_BASE0 | 0x1c000)	/* BS=1M,BU=R/W,BW=32bit */
+
+/* Memory Bank 5 (FPGA / 16Bit) initialization */
+#define CFG_EBC_PB5AP		0x03840f40	/* BME=0,TWT=3,CSN=1,TH=0,RE=1,SOR=0,BEM=1 */
+#define CFG_EBC_PB5CR		(CFG_FPGA_BASE1 | 0x1a000)	/* BS=1M,BU=R/W,BW=16bit */
+
+/*-----------------------------------------------------------------------
+ * NAND FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
+#define CFG_NAND_SELECT_DEVICE	1 /* nand driver supports mutipl. chips */
+#define CFG_NAND_QUIET_TEST	1
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH     */
+#define BOOTFLAG_WARM	0x02	/* Software reboot                      */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 8a74c4f..cf98324 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -454,16 +454,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
@@ -506,7 +496,7 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 /* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */
 #define CFG_ISA_IO 0xE8000000
-/* see also drivers/videomodes.c */
+/* see also drivers/video/videomodes.c */
 #define CFG_DEFAULT_VIDEO_MODE 0x303
 #endif
 
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index f2c3699..3ca85b8 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -395,13 +395,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-  #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/SX1.h b/include/configs/SX1.h
index 05cef87..50ad7dd 100644
--- a/include/configs/SX1.h
+++ b/include/configs/SX1.h
@@ -181,7 +181,7 @@
  * FLASH driver setup
  */
 #define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/mtd/cfi_flash.c */
 #define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
 #define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
 
diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h
new file mode 100644
index 0000000..761a352
--- /dev/null
+++ b/include/configs/TK885D.h
@@ -0,0 +1,513 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2006
+ * Martin Krause, TQ-Systems GmBH, martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC885		1	/* This is a MPC885 CPU		*/
+#define CONFIG_TQM885D		1	/* ...on a TQM88D module	*/
+#define CONFIG_TK885D		1	/* ...in a TK885D base board	*/
+
+#define CONFIG_8xx_OSCLK		10000000	/*  10 MHz - PLL input clock	*/
+#define CFG_8xx_CPUCLK_MIN		15000000	/*  15 MHz - CPU minimum clock	*/
+#define CFG_8xx_CPUCLK_MAX		133000000	/* 133 MHz - CPU maximum clock	*/
+#define CONFIG_8xx_CPUCLK_DEFAULT	66000000	/*  66 MHz - CPU default clock	*/
+						/* (it will be used if there is no	*/
+						/* 'cpuclk' variable with valid value)	*/
+
+#define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+
+#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
+
+#define CONFIG_BOOTCOUNT_LIMIT
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_BOARD_TYPES	1	/* support board types		*/
+
+#define CONFIG_PREBOOT	"echo;" \
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip;"					\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"rootpath=/opt/eldk/ppc_8xx\0"					\
+	"bootfile=/tftpboot/TQM885D/uImage\0"				\
+	"kernel_addr=40080000\0"					\
+	"ramdisk_addr=40180000\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=protect off 40000000 +${filesize};"			\
+		"erase 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"protect on 40000000 +${filesize}\0"			\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+#define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
+
+#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
+
+/* enable I2C and select the hardware/software driver */
+#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
+#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+
+#define CFG_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
+#define CFG_I2C_SLAVE		0xFE
+
+#ifdef CONFIG_SOFT_I2C
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define PB_SCL		0x00000020	/* PB 26 */
+#define PB_SDA		0x00000010	/* PB 27 */
+
+#define I2C_INIT	(immr->im_cpm.cp_pbdir |=  PB_SCL)
+#define I2C_ACTIVE	(immr->im_cpm.cp_pbdir |=  PB_SDA)
+#define I2C_TRISTATE	(immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ	((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
+			else	immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
+			else	immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
+#endif	/* CONFIG_SOFT_I2C */
+
+#define CFG_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C??	*/
+#define CFG_I2C_EEPROM_ADDR_LEN 2		/* two byte address	*/
+#define CFG_EEPROM_PAGE_WRITE_BITS	4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+
+# define CONFIG_RTC_DS1337 1
+# define CFG_I2C_RTC_ADDR 0x68
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+#undef CONFIG_RTC_MPC8xx		/* MPC885 does not support RTC	*/
+
+#define	CONFIG_TIMESTAMP		/* but print image timestmps	*/
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CFG_HUSH_PARSER
+#define	CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16	/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0300000	/* 1 ... 3 MB in DRAM	*/
+#define CFG_ALT_MEMTEST				/* alternate, more extensive
+						   memory test.*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Enable loopw command.
+ */
+#define CONFIG_LOOPW
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFFF00000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x40000000
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 128 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
+
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
+#define CFG_ENV_SIZE		0x08000 /* Total Size of Environment		*/
+#define CFG_ENV_SECT_SIZE	0x20000 /* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Hardware Information Block
+ */
+#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CFG_HWINFO_SIZE		0x00000040	/* size	  of HW Info block */
+#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#ifndef CONFIG_CAN_DRIVER
+#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#else	/* we must activate GPL5 in the SIUMCR for CAN */
+#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#endif	/* CONFIG_CAN_DRIVER */
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	SCCR_EBDF11
+#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00)
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
+#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
+#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	0x0100
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER 0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
+#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #0	*/
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+
+/*
+ * FLASH timing: Default value of OR0 after reset
+ */
+#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \
+				 OR_SCY_6_CLK | OR_TRLX)
+
+#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+
+#define CFG_OR1_REMAP	CFG_OR0_REMAP
+#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
+#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+
+/*
+ * BR2/3 and OR2/3 (SDRAM)
+ *
+ */
+#define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank #0	*/
+#define SDRAM_BASE3_PRELIM	0x20000000	/* SDRAM bank #1	*/
+#define SDRAM_MAX_SIZE		(256 << 20)	/* max 256 MB per bank	*/
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
+#define CFG_OR_TIMING_SDRAM	0x00000A00
+
+#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
+#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+#ifndef CONFIG_CAN_DRIVER
+#define CFG_OR3_PRELIM	CFG_OR2_PRELIM
+#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
+#define CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+					BR_PS_8 | BR_MS_UPMB | BR_V )
+#endif	/* CONFIG_CAN_DRIVER */
+
+/*
+ * 4096	Rows from SDRAM example configuration
+ * 1000	factor s -> ms
+ * 64	PTP (pre-divider from MPTPR) from SDRAM example configuration
+ * 4	Number of refresh cycles per period
+ * 64	Refresh cycle in ms per number of rows
+ */
+#define CFG_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
+
+/*
+ * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad)
+ *
+ *                        CPUclock(MHz) * 31.2
+ * CFG_MAMR_PTA = -----------------------------------     with DFBRG = 0
+ *                2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16
+ *
+ * CPU clock =  15 MHz:  CFG_MAMR_PTA =  29   ->  4 * 7.73 us
+ * CPU clock =  50 MHz:  CFG_MAMR_PTA =  97   ->  4 * 7.76 us
+ * CPU clock =  66 MHz:  CFG_MAMR_PTA = 128   ->  4 * 7.75 us
+ * CPU clock = 133 MHz:  CFG_MAMR_PTA = 255   ->  4 * 7.67 us
+ *
+ * Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will
+ * be met also in the default configuration, i.e. if environment variable
+ * 'cpuclk' is not set.
+ */
+#define CFG_MAMR_PTA		128
+
+/*
+ * Memory Periodic Timer Prescaler Register (MPTPR) values.
+ */
+/* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */
+#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16
+/* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */
+#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+/* 10 column SDRAM */
+#define CFG_MAMR_10COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+/*
+ * Network configuration
+ */
+#define CONFIG_FEC_ENET			/* enable ethernet on FEC */
+#define CONFIG_ETHER_ON_FEC1		/* ... for FEC1 */
+#define CONFIG_ETHER_ON_FEC2		/* ... for FEC2 */
+
+#define CONFIG_LAST_STAGE_INIT		1 /* Have to configure PHYs for Linux */
+
+/* CFG_DISCOVER_PHY only works with FEC if only one interface is enabled */
+#if (!defined(CONFIG_ETHER_ON_FEC1) || !defined(CONFIG_ETHER_ON_FEC2))
+#define CFG_DISCOVER_PHY
+#endif
+
+#ifndef CFG_DISCOVER_PHY
+/* PHY addresses - hard wired in hardware */
+#define CONFIG_FEC1_PHY	1
+#define CONFIG_FEC2_PHY	2
+#endif
+
+#define CONFIG_NET_RETRY_COUNT	3
+#define CONFIG_ETHPRIME		"FEC ETHERNET"
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 7ecc275..9a0e9b8 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -131,6 +131,7 @@
 /* USB */
 #if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define CONFIG_USB_OHCI_NEW
+#define CFG_OHCI_BE_CONTROLLER
 #define CONFIG_USB_STORAGE
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_USB
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 0147252..8ef3f09 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -378,15 +378,6 @@ extern int tqm834x_num_flash_banks;
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 #define CFG_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 6dbd392..f3b1a53 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -417,13 +417,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index 14848ab..3ca928e 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -52,9 +52,13 @@
 
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_NET_MULTI	1
+#undef  CONFIG_HAS_ETH1
+
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
+#define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
 
 #define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
@@ -204,8 +208,6 @@
 #define CFG_IDE_MAXBUS		2		/* max. 2 IDE busses	*/
 #define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
 
-#define CONFIG_ATAPI		1	/* ATAPI for Travelstar		*/
-
 #define CFG_ATA_BASE_ADDR	0xF0100000
 #define CFG_ATA_IDE0_OFFSET	0x0000
 #define CFG_ATA_IDE1_OFFSET	0x0010
@@ -244,11 +246,6 @@
 
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#if 0 /* test-only */
-#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
-#endif
-
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
@@ -281,19 +278,12 @@
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SPEED		100000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE		0x7F
 
 #define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
-#if 0 /* test-only */
-/* CAT24WC08/16... */
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
-/* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
-					/* 16 byte page write mode using*/
-					/* last 4 bits of the address	*/
-#else
+#define CFG_EEPROM_WREN         1
+
 /* CAT24WC32/64... */
 #define CFG_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
@@ -301,21 +291,10 @@
 #define CFG_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
 					/* 32 byte page write mode using*/
 					/* last 5 bits of the address	*/
-#endif
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
@@ -410,18 +389,20 @@
  * GPIO0[28-29] - UART1 data signal input/output
  * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs -> GPIO
  */
-#define CFG_GPIO0_OSRH		0x40000550
+#define CFG_GPIO0_OSRH		0x00000550
 #define CFG_GPIO0_OSRL		0x00000110
 #define CFG_GPIO0_ISR1H		0x00000000
 #define CFG_GPIO0_ISR1L		0x15555440
 #define CFG_GPIO0_TSRH		0x00000000
 #define CFG_GPIO0_TSRL		0x00000000
-#define CFG_GPIO0_TCR		0xF7FE0017
+#define CFG_GPIO0_TCR		0x777E0017
 
 #define CFG_DUART_RST		(0x80000000 >> 14)
 #define CFG_LCD_ENDIAN		(0x80000000 >> 7)
+#define CFG_IIC_ON		(0x80000000 >> 8)
 #define CFG_LCD0_RST		(0x80000000 >> 30)
 #define CFG_LCD1_RST		(0x80000000 >> 31)
+#define CFG_EEPROM_WP		(0x80000000 >> 0)
 
 /*
  * Internal Definitions
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index 5512f4b..ec6f205 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -248,16 +248,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index fc177fb..7017fff 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -290,15 +290,6 @@
  */
 #define SPD_EEPROM_ADDRESS      0x50	/* XXX conflicting address!!! XXX */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192		/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32		/* ...		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5		/* log base 2 of the above val. */
-#endif
-
 /*
  * Init Memory Controller:
  */
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 20d693f..bfb3156 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -293,15 +293,6 @@
  */
 #define SPD_EEPROM_ADDRESS      0x50	/* XXX conflicting address!!! XXX */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192		/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32		/* ...		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5		/* log base 2 of the above val. */
-#endif
-
 /*
  * Init Memory Controller:
  */
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index 656784a..582d8cf 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -254,16 +254,6 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 611f5a6..38ea576 100644
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -257,14 +257,6 @@ extern void out32(unsigned int, unsigned long);
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192 /* For AMCC 440GX CPUs */
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
 
 /*
  * Internal Definitions
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index e3f6e2c..dc322dd 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -385,15 +385,6 @@
 #define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384		/* For AMCC 405EZ CPU		*/
-#define CFG_CACHELINE_SIZE	32		/* ...				*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5		/* log base 2 of the above value*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index 58060a8..11e7e44 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -407,4 +407,12 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#define OF_CPU			"PowerPC,5121@0"
+#define OF_SOC			"soc5121@80000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc5121@80000000/serial@11300"
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index d88c3ad..cfe08c8 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -296,7 +296,9 @@
 /*-----------------------------------------------------------------------
  * FPGA stuff
  *-----------------------------------------------------------------------*/
-#define CONFIG_FPGA             CFG_ALTERA_CYCLON2
+#define CONFIG_FPGA
+#define CONFIG_FPGA_ALTERA
+#define CONFIG_FPGA_CYCLON2
 #define CFG_FPGA_CHECK_CTRLC
 #define CFG_FPGA_PROG_FEEDBACK
 #define CONFIG_FPGA_COUNT       1		/* Ich habe 2 ... aber in
@@ -355,12 +357,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		32768	/* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
new file mode 100755
index 0000000..f101206
--- /dev/null
+++ b/include/configs/apollon.h
@@ -0,0 +1,238 @@
+/*
+ * (C) Copyright 2005-2007
+ * Samsung Electronics,
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Configuration settings for the 2420 Samsung Apollon board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARM1136		1 /* This is an arm1136 CPU core */
+#define CONFIG_OMAP		1 /* in a TI OMAP core */
+#define CONFIG_OMAP2420		1 /* which is in a 2420 */
+#define CONFIG_OMAP2420_APOLLON	1
+#define CONFIG_APOLLON		1
+#define CONFIG_APOLLON_PLUS	1 /* If you have apollon plus 1.x */
+
+/* Clock config to target*/
+#define PRCM_CONFIG_I		1
+/* #define PRCM_CONFIG_II	1 */
+
+/* Boot method */
+/* uncomment if you use NOR boot */
+/* #define CFG_NOR_BOOT		1 */
+
+/* uncomment if you use NOR on CS3 */
+/* #define CFG_USE_NOR		1 */
+
+#ifdef CFG_NOR_BOOT
+#undef CFG_USE_NOR
+#define CFG_USE_NOR		1
+#endif
+
+#include <asm/arch/omap2420.h>	/* get chip and board defs */
+
+#define	V_SCLK	12000000
+
+/* input clock of PLL */
+/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */
+#define	CONFIG_SYS_CLK_FREQ	V_SCLK
+
+#undef	CONFIG_USE_IRQ	/* no support for IRQs */
+#define	CONFIG_MISC_INIT_R
+
+#define	CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
+#define	CONFIG_SETUP_MEMORY_TAGS	1
+#define	CONFIG_INITRD_TAG	1
+#define	CONFIG_REVISION_TAG	1
+
+/*
+ * Size of malloc() pool
+ */
+#define	CFG_ENV_SIZE SZ_128K	/* Total Size of Environment Sector */
+#define	CFG_MALLOC_LEN	(CFG_ENV_SIZE + SZ_128K)
+#define	CFG_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * SMC91c96 Etherent
+ */
+#define	CONFIG_DRIVER_LAN91C96
+#define	CONFIG_LAN91C96_BASE	(APOLLON_CS1_BASE+0x300)
+#define	CONFIG_LAN91C96_EXT_PHY
+
+/*
+ * NS16550 Configuration
+ */
+#define	V_NS16550_CLK	(48000000)	/* 48MHz (APLL96/2) */
+
+#define	CFG_NS16550
+#define	CFG_NS16550_SERIAL
+#define	CFG_NS16550_REG_SIZE	(-4)
+#define	CFG_NS16550_CLK	V_NS16550_CLK	/* 3MHz (1.5MHz*2) */
+#define	CFG_NS16550_COM1	OMAP2420_UART1
+
+/*
+ * select serial console configuration
+ */
+#define	CONFIG_SERIAL1	1	/* UART1 on H4 */
+
+ /*
+ * I2C configuration
+ */
+#define	CONFIG_HARD_I2C
+#define	CFG_I2C_SPEED	100000
+#define	CFG_I2C_SLAVE	1
+#define	CONFIG_DRIVER_OMAP24XX_I2C
+
+/* allow to overwrite serial and ethaddr */
+#define	CONFIG_ENV_OVERWRITE
+#define	CONFIG_CONS_INDEX	1
+#define	CONFIG_BAUDRATE		115200
+#define	CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include	<config_cmd_default.h>
+
+#define	CONFIG_CMD_DHCP
+#define	CONFIG_CMD_DIAG
+#define	CONFIG_CMD_ONENAND
+
+#undef	CONFIG_CMD_AUTOSCRIPT
+
+#ifndef	CFG_USE_NOR
+# undef	CONFIG_CMD_FLASH
+# undef	CONFIG_CMD_IMLS
+#endif
+
+#define	CONFIG_BOOTP_MASK	CONFIG_BOOTP_DEFAULT
+
+#define	CONFIG_BOOTDELAY	1
+
+#define	CONFIG_NETMASK	255.255.255.0
+#define	CONFIG_IPADDR	192.168.116.25
+#define	CONFIG_SERVERIP	192.168.116.1
+#define	CONFIG_BOOTFILE	"uImage"
+#define	CONFIG_ETHADDR	00:0E:99:00:24:20
+
+#ifdef	CONFIG_APOLLON_PLUS
+# define	CONFIG_BOOTARGS "root=/dev/nfs rw mem=64M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2"
+#else
+# define	CONFIG_BOOTARGS "root=/dev/nfs rw mem=128M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2"
+#endif
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"Image=tftp 0x80008000 Image; go 0x80008000\0"			\
+	"zImage=tftp 0x80180000 zImage; go 0x80180000\0"		\
+	"uImage=tftp 0x80180000 uImage; bootm 0x80180000\0"		\
+	"uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0"		\
+	"xloader=tftp 0x80180000 x-load.bin; cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0"	\
+	"syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0"	\
+	"syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0"	\
+	"norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0"	\
+	"oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0"\
+	"onesyncboot=run syncmode oneboot\0"				\
+	"bootcmd=run uboot\0"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	V_PROMPT	"Apollon # "
+
+#define	CFG_LONGHELP	/* undef to save memory */
+#define	CFG_PROMPT	V_PROMPT
+#define	CFG_CBSIZE	256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define	CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define	CFG_MAXARGS	16	/* max number of command args */
+#define	CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+
+#define	CFG_MEMTEST_START 	(OMAP2420_SDRC_CS0)	/* memtest works on */
+#define	CFG_MEMTEST_END		(OMAP2420_SDRC_CS0+SZ_31M)
+
+#undef	CFG_CLKS_IN_HZ	/* everything, incl board info, in Hz */
+
+#define	CFG_LOAD_ADDR	(OMAP2420_SDRC_CS0)	/* default load address */
+
+/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2)
+ * or by 32KHz clk, or from external sig. This rate is divided by a local
+ * divisor.
+ */
+#define	V_PVT	7	/* use with 12MHz/128 */
+
+#define	CFG_TIMERBASE	OMAP2420_GPT2
+#define	CFG_PVT	V_PVT	/* 2^(pvt+1) */
+#define	CFG_HZ		((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define	CONFIG_STACKSIZE SZ_128K	/* regular stack */
+#ifdef	CONFIG_USE_IRQ
+# define	CONFIG_STACKSIZE_IRQ SZ_4K	/* IRQ stack */
+# define	CONFIG_STACKSIZE_FIQ SZ_4K	/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define	CONFIG_NR_DRAM_BANKS	1	/* CS1 may or may not be populated */
+#define	PHYS_SDRAM_1		OMAP2420_SDRC_CS0
+#define	PHYS_SDRAM_1_SIZE	SZ_128M
+#define	PHYS_SDRAM_2		OMAP2420_SDRC_CS1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#ifdef	CFG_USE_NOR
+/* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */
+# define	CFG_FLASH_BASE		0x18000000
+# define	CFG_MAX_FLASH_BANKS	1
+# define	CFG_MAX_FLASH_SECT	1024
+/*-----------------------------------------------------------------------
+
+ * CFI FLASH driver setup
+ */
+# define	CFG_FLASH_CFI	1	/* Flash memory is CFI compliant */
+# define	CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
+/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* Use buffered writes (~10x faster) */
+# define	CFG_FLASH_PROTECTION	1	/* Use h/w sector protection*/
+
+#else	/* !CFG_USE_NOR */
+# define	CFG_NO_FLASH	1
+#endif	/* CFG_USE_NOR */
+
+/* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */
+#define	CFG_ONENAND_BASE	0x00000000
+#define	CFG_ENV_IS_IN_ONENAND	1
+#define CFG_ENV_ADDR		0x00020000
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index 14c5638..d577448 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -414,15 +414,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		(32<<10) /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h
index 7736a1e..eca195a 100644
--- a/include/configs/bubinga.h
+++ b/include/configs/bubinga.h
@@ -321,14 +321,6 @@
 #define CFG_ENV_ADDR		\
 	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
 #endif
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405EP CPU			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
 
 /*
  * Init Memory Controller:
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index c43b497..a24478d 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -290,14 +290,6 @@
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 /*
- * Cache configuration
- *
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's */
-					/* have only 8kB, 16kB is save here  */
-#define CFG_CACHELINE_SIZE	32
-
-/*
  * Miscellaneous board specific definitions
  *
  */
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index a7120aa..064650c 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -289,14 +289,6 @@
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 /*
- * Cache configuration
- *
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's */
-					/* have only 8kB, 16kB is save here  */
-#define CFG_CACHELINE_SIZE	32
-
-/*
  * Miscellaneous board specific definitions
  *
  */
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index 2c626a0..5faa9eb 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -293,14 +293,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
 
 /*
  * Internal Definitions
diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h
index 577f459..b43b228 100644
--- a/include/configs/hcu4.h
+++ b/include/configs/hcu4.h
@@ -321,13 +321,6 @@
 #define CONFIG_PORT_ADDR	0xF0000500
 
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- *----------------------------------------------------------------------*/
-#define CFG_DCACHE_SIZE		16384	/* For IBM 405GPr CPUs	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#define CFG_CACHELINE_SHIFT	5	      /* log base 2 of the above value	*/
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
index 9085881..1214bc3 100644
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@ -364,13 +364,6 @@
 #define HCU_CPLD_VERSION_REGISTER ( CFG_CPLD + 0x0F00000 )
 #define HCU_HW_VERSION_REGISTER   ( CFG_CPLD + 0x1400000 )
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- *----------------------------------------------------------------------*/
-#define CFG_DCACHE_SIZE		(32<<10)  /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	      /* ...			            */
-#define CFG_CACHELINE_SHIFT	5	      /* log base 2 of the above value	*/
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 0fac28f..206007d 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -142,7 +142,7 @@
 		"cp.l 100000 f0000b28 1\0"				\
 	"ideargs=setenv bootargs root=/dev/hda1 rw\0"			\
 	"ide_boot=ext2load ide 0:1 200000 uImage;"			\
-		"run ideargs addip addcons enable_disp;bootm"		\
+		"run ideargs addip addcons enable_disp;bootm\0"		\
 	"brightness=255\0"						\
 	""
 
@@ -156,24 +156,24 @@
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		0xFFE00000
-
-#define CFG_FLASH_SIZE		0x00200000 /* 2 MByte */
-#define CFG_MAX_FLASH_SECT	35	/* max num of sects on one chip */
-
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x4000) /* second sector */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
-					   (= chip selects) */
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1
+#define CFG_FLASH_BASE		0xffe00000
+#define CFG_FLASH_SIZE		0x00200000
+#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
 
 /*
  * Environment settings
  */
 #define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x4000)
 #define CFG_ENV_SIZE		0x2000
 #define CFG_ENV_SECT_SIZE	0x2000
 #define CONFIG_ENV_OVERWRITE	1
+#define CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*
  * Memory map
@@ -182,7 +182,14 @@
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_DEFAULT_MBAR	0x80000000
 
-#define CONFIG_MPC5200_DDR
+/*
+ * SDRAM controller configuration
+ */
+#undef CONFIG_SDR_MT48LC16M16A2
+#undef CONFIG_DDR_MT46V16M16
+#undef CONFIG_DDR_MT46V32M16
+#undef CONFIG_DDR_HYB25D512160BF
+#define CONFIG_DDR_K4H511638C
 
 /* Use ON-Chip SRAM until RAM will be available */
 #define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
@@ -203,7 +210,7 @@
 #   define CFG_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index 69310d4..e1d1483 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -168,7 +168,7 @@ SIB at Block62 End Block62 address 0x24f80000
 /*
  * Move up the U-Boot & monitor area if more flash is fitted.
  * If this U-Boot is to be run on Integrators with varying flash sizes,
- * drivers/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
+ * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
  * register and dynamically assign CFG_ENV_ADDR & CFG_MONITOR_BASE
  * - CFG_MONITOR_BASE is set to indicate that the environment is not
  * embedded in the boot monitor(s) area
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 7908e5a..78c794a 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -62,7 +62,7 @@
 #define CFG_PCI_TARGBASE	CFG_PCI_MEMBASE
 
 #define CFG_PCIE_MEMBASE	0xb0000000	/* mapped PCIe memory	*/
-#define CFG_PCIE_MEMSIZE	0x01000000
+#define CFG_PCIE_MEMSIZE	0x08000000	/* smallest incr for PCIe port */
 #define CFG_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
 
 #define CFG_PCIE0_CFGBASE	0xc0000000
@@ -72,6 +72,9 @@
 #define CFG_PCIE1_XCFGBASE	0xc3001000
 #define CFG_PCIE2_XCFGBASE	0xc3002000
 
+/* base address of inbound PCIe window */
+#define CFG_PCIE_INBOUND_BASE	0x0000000000000000ULL
+
 /* System RAM mapped to PCI space */
 #define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
 #define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
@@ -108,6 +111,7 @@
 #define CONFIG_SPD_EEPROM	1	/* Use SPD EEPROM for setup	*/
 #define SPD_EEPROM_ADDRESS	{0x51, 0x52}	/* SPD i2c spd addresses*/
 #define CONFIG_DDR_ECC		1	/* with ECC support		*/
+#define CONFIG_DDR_RQDC_FIXED	0x80000038 /* optimal value found by GDA*/
 #undef  CONFIG_STRESS
 
 /*-----------------------------------------------------------------------
@@ -190,8 +194,14 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
 		"bootm\0"						\
-	"rootpath=/opt/eldk/ppc_4xx\0"				\
+	"net_nfs_fdt=tftp 200000 ${bootfile};"				\
+		"tftp ${fdt_addr} ${fdt_file};"				\
+		"run nfsargs addip addtty;"				\
+		"bootm 200000 - ${fdt_addr}\0"				\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
 	"bootfile=katmai/uImage\0"					\
+	"fdt_file=katmai/katmai.dtb\0"					\
+	"fdt_addr=400000\0"						\
 	"kernel_addr=fff10000\0"					\
 	"ramdisk_addr=fff20000\0"					\
 	"initrd_high=30000000\0"					\
@@ -202,6 +212,7 @@
 	"upd=run load;run update\0"					\
 	"kozio=bootm ffc60000\0"					\
 	"pciconfighost=1\0"						\
+	"pcie_mode=RP:RP:RP\0"						\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -243,7 +254,7 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SDRAM
-
+#define CONFIG_CMD_SNTP
 
 #define	CONFIG_IBM_EMAC4_V4	1	/* 440SPe has this EMAC version	*/
 #define CONFIG_MII		1	/* MII PHY management		*/
@@ -427,14 +438,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/*Initial Memory map for Linux*/
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs		*/
-#define CFG_CACHELINE_SIZE	32	/* ...				*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
 
 /*
  * Internal Definitions
@@ -449,4 +452,8 @@
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
new file mode 100644
index 0000000..f3e8601
--- /dev/null
+++ b/include/configs/kilauea.h
@@ -0,0 +1,523 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * kilauea.h - configuration for AMCC Kilauea (405EX)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_KILAUEA		1		/* Board is Kilauea	*/
+#define CONFIG_4xx		1		/* ... PPC4xx family	*/
+#define CONFIG_405EX		1		/* Specifc 405EX support*/
+#define CONFIG_SYS_CLK_FREQ	33333333	/* ext frequency to pll	*/
+
+#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
+#define CONFIG_BOARD_EMAC_COUNT
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0xFC000000
+#define CFG_NAND_ADDR		0xF8000000
+#define CFG_FPGA_BASE		0xF0000000
+#define CFG_PERIPHERAL_BASE	0xEF600000      /* internal peripherals*/
+#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(512 * 1024)	/* Reserve 512 kB for malloc()	*/
+#define CFG_MONITOR_BASE	(TEXT_BASE)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR	0x02000000	/* inside of SDRAM	*/
+#define CFG_INIT_RAM_END	(4 << 10)
+#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+/* reserve some memory for POST and BOOT limit info */
+#define CFG_INIT_SP_OFFSET	(CFG_GBL_DATA_OFFSET - 16)
+
+/* extra data in init-ram */
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 4)
+#define CFG_POST_MAGIC		(CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 8)
+#define CFG_POST_VAL		(CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 12)
+#define CFG_OCM_DATA_ADDR	CFG_INIT_RAM_ADDR /* for commproc.c	*/
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI     1
+/* define this if you want console on UART1 */
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE						\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#else
+#define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
+#define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment */
+#endif
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
+#define CFG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
+
+#define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 4k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ * On 440EPx the SPL is copied to SDRAM before the NAND controller is
+ * set up. While still running from cache, I experienced problems accessing
+ * the NAND controller.	sr - 2006-08-25
+ */
+#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location			*/
+#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size			*/
+#define CFG_NAND_BOOT_SPL_DST	0x00800000	/* Copy SPL here		*/
+#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr	*/
+#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST /* Start NUB from this addr	*/
+#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image	*/
+#define CFG_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image	*/
+
+/*
+ * Now the NAND chip has to be defined (no autodetection used!)
+ */
+#define CFG_NAND_PAGE_SIZE	512		/* NAND chip page size		*/
+#define CFG_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size		*/
+#define CFG_NAND_PAGE_COUNT	32		/* NAND chip page count		*/
+#define CFG_NAND_BAD_BLOCK_POS	5		/* Location of bad block marker	*/
+#define CFG_NAND_4_ADDR_CYCLE	1		/* Fourth addr used (>32MB)	*/
+
+#define CFG_NAND_ECCSIZE	256
+#define CFG_NAND_ECCBYTES	3
+#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+#define CFG_NAND_OOBSIZE	16
+#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+#define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
+
+#ifdef CFG_ENV_IS_IN_NAND
+/*
+ * For NAND booting the environment is embedded in the U-Boot image. Please take
+ * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
+ */
+#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
+#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * NAND FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
+#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM        (256)		/* 256MB			*/
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
+#define CFG_I2C_EEPROM_ADDR	0x52	/* I2C boot EEPROM (24C02BN)	*/
+#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
+
+/* Standard DTT sensor configuration */
+#define CONFIG_DTT_DS1775	1
+#define CONFIG_DTT_SENSORS	{ 0 }
+#define CFG_I2C_DTT_ADDR	0x48
+
+/* RTC configuration */
+#define CONFIG_RTC_DS1338	1
+#define CFG_I2C_RTC_ADDR	0x68
+
+/*-----------------------------------------------------------------------
+ * Ethernet
+ *----------------------------------------------------------------------*/
+#define CONFIG_M88E1111_PHY	1
+#define CONFIG_IBM_EMAC4_V4	1
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+
+#define CONFIG_PHY_RESET	1	/* reset phy upon startup	*/
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0		1
+
+#define CONFIG_NET_MULTI	1
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"   */
+#define CONFIG_PHY1_ADDR	2
+
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"logversion=2\0"						\
+	"netdev=eth0\0"							\
+	"hostname=kilauea\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"net_nfs=tftp 200000 ${bootfile};"				\
+		"run nfsargs addip addtty;"				\
+		"bootm 200000\0"					\
+	"net_nfs_fdt=tftp 200000 ${bootfile};"				\
+		"tftp ${fdt_addr} ${fdt_file};"				\
+		"run nfsargs addip addtty;"				\
+		"bootm 200000 - ${fdt_addr}\0"				\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=kilauea/uImage\0"					\
+	"fdt_file=kilauea/kilauea.dtb\0"				\
+	"fdt_addr=400000\0"						\
+	"kernel_addr=fc000000\0"					\
+	"ramdisk_addr=fc200000\0"					\
+	"initrd_high=30000000\0"					\
+	"load=tftp 200000 kilauea/u-boot.bin\0"				\
+	"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;"	\
+		"cp.b ${fileaddr} fffa0000 ${filesize};"		\
+		"setenv filesize;saveenv\0"				\
+	"upd=run load update\0"						\
+	"nload=tftp 200000 kilauea/u-boot-nand.bin\0"			\
+	"nupdate=nand erase 0 60000;nand write 200000 0 60000;"		\
+		"setenv filesize;saveenv\0"				\
+	"nupd=run nload nupdate\0"					\
+	"pciconfighost=1\0"						\
+	"pcie_mode=RP:RP\0"						\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate change	*/
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOG
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
+/* POST support */
+#define CONFIG_POST		(CFG_POST_MEMORY	| \
+				 CFG_POST_CACHE		| \
+				 CFG_POST_CPU		| \
+				 CFG_POST_ETHER		| \
+				 CFG_POST_I2C		| \
+				 CFG_POST_MEMORY	| \
+				 CFG_POST_UART)
+
+/* Define here the base-addresses of the UARTs to test in POST */
+#define CFG_POST_UART_TABLE	{UART0_BASE, UART1_BASE}
+
+#define CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
+
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	        16	/* max number of command args	*/
+#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+
+#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+#define CONFIG_PCI			/* include pci support	        */
+#define CONFIG_PCI_PNP		1	/* do pci plug-and-play		*/
+#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
+
+/*-----------------------------------------------------------------------
+ * PCIe stuff
+ *----------------------------------------------------------------------*/
+#define CFG_PCIE_MEMBASE	0x90000000	/* mapped PCIe memory	*/
+#define CFG_PCIE_MEMSIZE	0x08000000      /* 128 Meg, smallest incr per port */
+
+#define	CFG_PCIE0_CFGBASE	0xa0000000      /* remote access */
+#define	CFG_PCIE0_XCFGBASE	0xb0000000      /* local access */
+#define	CFG_PCIE0_CFGMASK	0xe0000001      /* 512 Meg */
+
+#define	CFG_PCIE1_CFGBASE	0xc0000000      /* remote access */
+#define	CFG_PCIE1_XCFGBASE	0xd0000000      /* local access */
+#define	CFG_PCIE1_CFGMASK	0xe0000001      /* 512 Meg */
+
+#define	CFG_PCIE0_UTLBASE	0xef502000
+#define	CFG_PCIE1_UTLBASE	0xef503000
+
+/* base address of inbound PCIe window */
+#define CFG_PCIE_INBOUND_BASE	0x0000000000000000ULL
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+/* booting from NAND, so NAND chips select has to be on CS 0 */
+#define CFG_NAND_CS		0		/* NAND chip connected to CSx	*/
+
+/* Memory Bank 1 (NOR-FLASH) initialization					*/
+#define CFG_EBC_PB1AP		0x05806500
+#define CFG_EBC_PB1CR           0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
+
+/* Memory Bank 0 (NAND-FLASH) initialization					*/
+#define CFG_EBC_PB0AP		0x018003c0
+#define CFG_EBC_PB0CR		(CFG_NAND_ADDR | 0x1e000)
+#else
+#define CFG_NAND_CS		1		/* NAND chip connected to CSx	*/
+
+/* Memory Bank 0 (NOR-FLASH) initialization					*/
+#define CFG_EBC_PB0AP		0x05806500
+#define CFG_EBC_PB0CR           0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
+
+/* Memory Bank 1 (NAND-FLASH) initialization					*/
+#define CFG_EBC_PB1AP		0x018003c0
+#define CFG_EBC_PB1CR		(CFG_NAND_ADDR | 0x1e000)
+#endif
+
+/* Memory Bank 2 (FPGA) initialization						*/
+#define CFG_EBC_PB2AP           0x9400C800
+#define CFG_EBC_PB2CR           0xF0018000 /*  BAS=0x800,BS=1MB,BU=R/W,BW=8bit	*/
+
+#define CFG_EBC_CFG		0x7FC00000 /*  EBC0_CFG */
+
+/*-----------------------------------------------------------------------
+ * GPIO Setup
+ *----------------------------------------------------------------------*/
+#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+{											\
+/* GPIO Core 0 */									\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO0	EBC_DATA_PAR(0)			*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO1	EBC_DATA_PAR(1)			*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO2	EBC_DATA_PAR(2)			*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO3	EBC_DATA_PAR(3)			*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO4	EBC_DATA(20)	USB2_DATA(4)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO5	EBC_DATA(21)	USB2_DATA(5)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO6	EBC_DATA(22)	USB2_DATA(6)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO7	EBC_DATA(23)	USB2_DATA(7)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8	CS(1)/NFCE(1)	IRQ(7)		*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9	CS(2)/NFCE(2)	IRQ(8)		*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 CS(3)/NFCE(3)	IRQ(9)		*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 IRQ(6)				*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO12 EBC_DATA(16)	USB2_DATA(0)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO13 EBC_DATA(17)	USB2_DATA(1)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO14 EBC_DATA(18)	USB2_DATA(2)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO15 EBC_DATA(19)	USB2_DATA(3)	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 UART0_DCD	UART1_CTS	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 UART0_DSR	UART1_RTS	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 UART0_CTS			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 UART0_RTS			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO20 UART0_DTR	UART1_TX	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO21 UART0_RI	UART1_RX	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO22 EBC_HOLD_REQ	DMA_ACK2	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO23 EBC_HOLD_ACK	DMA_REQ2	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO24 EBC_EXT_REQ	DMA_EOT2	IRQ(4) */ \
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO25 EBC_EXT_ACK	DMA_ACK3	IRQ(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 EBC_ADDR(5)	DMA_EOT0	TS(3) */ \
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO27 EBC_BUS_REQ	DMA_EOT3	IRQ(5) */ \
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO28				*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO29 DMA_EOT1	IRQ(2)		*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO30 DMA_REQ1	IRQ(1)		*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO31 DMA_ACK1	IRQ(0)		*/	\
+}												\
+}
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Some Kilauea stuff..., mainly fpga registers
+ */
+#define CFG_FPGA_REG_BASE		CFG_FPGA_BASE
+#define CFG_FPGA_FIFO_BASE		(in32(CFG_FPGA_BASE) | (1 << 11))
+
+/* interrupt */
+#define CFG_FPGA_SLIC0_R_DPRAM_INT	0x80000000
+#define CFG_FPGA_SLIC0_W_DPRAM_INT	0x40000000
+#define CFG_FPGA_SLIC1_R_DPRAM_INT	0x20000000
+#define CFG_FPGA_SLIC1_W_DPRAM_INT	0x10000000
+#define CFG_FPGA_PHY0_INT		0x08000000
+#define CFG_FPGA_PHY1_INT		0x04000000
+#define CFG_FPGA_SLIC0_INT		0x02000000
+#define CFG_FPGA_SLIC1_INT		0x01000000
+
+/* DPRAM setting */
+/* 00: 32B; 01: 64B; 10: 128B; 11: 256B  */
+#define CFG_FPGA_DPRAM_R_INT_LINE	0x00400000	/* 64 B */
+#define CFG_FPGA_DPRAM_W_INT_LINE	0x00100000	/* 64 B */
+#define CFG_FPGA_DPRAM_RW_TYPE		0x00080000
+#define CFG_FPGA_DPRAM_RST		0x00040000
+#define CFG_FPGA_UART0_FO		0x00020000
+#define CFG_FPGA_UART1_FO		0x00010000
+
+/* loopback */
+#define CFG_FPGA_CHIPSIDE_LOOPBACK	0x00004000
+#define CFG_FPGA_LINESIDE_LOOPBACK	0x00008000
+#define CFG_FPGA_SLIC0_ENABLE		0x00002000
+#define CFG_FPGA_SLIC1_ENABLE		0x00001000
+#define CFG_FPGA_SLIC0_CS		0x00000800
+#define CFG_FPGA_SLIC1_CS		0x00000400
+#define CFG_FPGA_USER_LED0		0x00000200
+#define CFG_FPGA_USER_LED1		0x00000100
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/korat.h b/include/configs/korat.h
new file mode 100644
index 0000000..5182972
--- /dev/null
+++ b/include/configs/korat.h
@@ -0,0 +1,526 @@
+/*
+ * (C) Copyright 2007-2008
+ * Larry Johnson, lrj@acm.org
+ *
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * korat.h - configuration for Korat board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_440EPX		1	/* Specific PPC440EPx           */
+#define CONFIG_4xx		1	/* ... PPC4xx family            */
+#define CONFIG_SYS_CLK_FREQ	33333333
+
+#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f      */
+#define CONFIG_MISC_INIT_R	1	/* Call misc_init_r             */
+
+/*-----------------------------------------------------------------------
+ * Manufacturer's information serial EEPROM parameters
+ *----------------------------------------------------------------------*/
+#define MAN_DATA_EEPROM_ADDR	0x53	/* EEPROM I2C address           */
+#define MAN_SERIAL_NO_FIELD	2
+#define MAN_SERIAL_NO_LENGTH	13
+#define MAN_MAC_ADDR_FIELD	3
+#define MAN_MAC_ADDR_LENGTH	17
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor   */
+#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()  */
+
+#define CFG_BOOT_BASE_ADDR	0xf0000000
+#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0          */
+#define CFG_FLASH_BASE		0xfc000000	/* start of FLASH       */
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_OCM_BASE		0xe0010000	/* ocm                  */
+#define CFG_OCM_DATA_ADDR	CFG_OCM_BASE
+#define CFG_PCI_BASE		0xe0000000	/* Internal PCI regs    */
+#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory    */
+#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
+#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
+
+/* Don't change either of these */
+#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals */
+
+#define CFG_USB2D0_BASE		0xe0000100
+#define CFG_USB_DEVICE		0xe0000000
+#define CFG_USB_HOST		0xe0000400
+#define CFG_CPLD_BASE		0xc0000000
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+/* 440EPx has 16KB of internal SRAM, so no need for D-Cache		*/
+#undef CFG_INIT_RAM_DCACHE
+#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM                  */
+#define CFG_INIT_RAM_END	(4 << 10)
+#define CFG_GBL_DATA_SIZE	256	/* num bytes initial data       */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk   */
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI	1
+/* define this if you want console on UART1 */
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE						\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environ vars   */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI			/* The flash is CFI compatible  */
+#define CFG_FLASH_CFI_DRIVER		/* Use common CFI driver        */
+
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks           */
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip    */
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)      */
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)      */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)     */
+#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection        */
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash        */
+
+#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector          */
+#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector     */
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM        (512)	/* 512 MiB      TODO: remove    */
+#define CONFIG_DDR_DATA_EYE		/* use DDR2 optimization        */
+#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for setup     */
+#define CONFIG_ZERO_SDRAM		/* Zero SDRAM after setup       */
+#define CONFIG_DDR_ECC			/* Use ECC when available       */
+#define SPD_EEPROM_ADDRESS	{0x50}
+#define CONFIG_PROG_SDRAM_TLB
+#define CFG_DRAM_TEST
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support    */
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged               */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address  */
+#define CFG_I2C_SLAVE		0x7F
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* I2C RTC */
+#define CONFIG_RTC_M41T60	1
+#define CFG_I2C_RTC_ADDR	0x68
+
+/* I2C SYSMON (LM73)							*/
+#define CONFIG_DTT_LM73		1	/* National Semi's LM73 */
+#define CONFIG_DTT_SENSORS	{2}	/* Sensor addresses     */
+#define CFG_DTT_MAX_TEMP	70
+#define CFG_DTT_MIN_TEMP	-30
+
+#define CONFIG_PREBOOT	"echo;"						\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+/* Setup some board specific values for the default environment variables */
+#define CONFIG_HOSTNAME		korat
+#define CFG_BOOTFILE		"bootfile=/tftpboot/korat/uImage\0"
+#define CFG_ROOTPATH		"rootpath=/opt/eldk/ppc_4xxFP\0"
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	CFG_BOOTFILE							\
+	CFG_ROOTPATH							\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"kernel_addr=FC000000\0"					\
+	"ramdisk_addr=FC180000\0"					\
+	"load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0"		\
+	"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;"	\
+		"cp.b 200000 FFFA0000 60000\0"			        \
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds     */
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download  */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change        */
+
+#define	CONFIG_IBM_EMAC4_V4	1
+#define CONFIG_MII		1	/* MII PHY management           */
+#define CONFIG_PHY_ADDR		2	/* PHY address, See schematics  */
+#define CONFIG_PHY_DYNAMIC_ANEG	1
+
+#define CONFIG_PHY_RESET        1	/* reset phy upon startup         */
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NET_MULTI	1
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"   */
+#define CONFIG_PHY1_ADDR	3
+
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/* Comment this out to enable USB 1.1 device */
+#define USB_2_0_DEVICE
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_SUBNETMASK
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_I2C_CMD_TREE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_USB
+
+/* POST support */
+#define CONFIG_POST		(CFG_POST_CACHE    | \
+				 CFG_POST_CPU	   | \
+				 CFG_POST_ECC      | \
+				 CFG_POST_ETHER	   | \
+				 CFG_POST_FPU	   | \
+				 CFG_POST_I2C	   | \
+				 CFG_POST_MEMORY   | \
+				 CFG_POST_RTC      | \
+				 CFG_POST_SPR      | \
+				 CFG_POST_UART)
+
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR	0xC8000000	/* free virtual address      */
+
+#define CFG_CONSOLE_IS_IN_ENV	/* Otherwise it catches logbuffer as output */
+
+#define CONFIG_SUPPORT_VFAT
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP			/* undef to save memory         */
+#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt       */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size      */
+#else
+#define CFG_CBSIZE	        256	/* Console I/O Buffer Size      */
+#endif
+#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS	        16	/* max number of command args   */
+#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START	0x0400000 /* memtest works on           */
+#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM        */
+
+#define CFG_LOAD_ADDR		0x100000  /* default load address       */
+#define CFG_EXTBDINFO		1  /* To use extended board_into (bd_t) */
+
+#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history     */
+#define CONFIG_LOOPW            1	/* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1	/* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI			/* include pci support          */
+#define CONFIG_PCI_PNP			/* do pci plug-and-play         */
+#define CFG_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP   */
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
+#define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC                         */
+#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever                     */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+
+/* Memory Bank 0 (NOR-FLASH) initialization				*/
+#define CFG_EBC_PB0AP		0x04017300
+#define CFG_EBC_PB0CR		(CFG_FLASH_BASE | 0x000DA000)
+
+/* Memory Bank 1 (NOR-FLASH) initialization				*/
+#define CFG_EBC_PB1AP		0x04017300
+#define CFG_EBC_PB1CR		(0xF8000000 | 0x000DA000)
+
+/* Memory Bank 2 (CPLD) initialization					*/
+#define CFG_EBC_PB2AP		0x04017300
+#define CFG_EBC_PB2CR		(CFG_CPLD_BASE | 0x00038000)
+
+/*-----------------------------------------------------------------------
+ * GPIO Setup
+ *
+ * Korat GPIO usage:
+ *
+ *                   Init.
+ * Pin    Source I/O value Function
+ * ------ ------ --- ----- ---------------------------------
+ * GPIO00  Alt1  I/O   x   PerAddr07
+ * GPIO01  Alt1  I/O   x   PerAddr06
+ * GPIO02  Alt1  I/O   x   PerAddr05
+ * GPIO03  GPIO   x    x   GPIO03 to expansion bus connector
+ * GPIO04  GPIO   x    x   GPIO04 to expansion bus connector
+ * GPIO05  GPIO   x    x   GPIO05 to expansion bus connector
+ * GPIO06  Alt1   O    x   PerCS1 (2nd NOR flash)
+ * GPIO07  Alt1   O    x   PerCS2 (CPLD)
+ * GPIO08  Alt1   O    x   PerCS3 to expansion bus connector
+ * GPIO09  Alt1   O    x   PerCS4 to expansion bus connector
+ * GPIO10  Alt1   O    x   PerCS5 to expansion bus connector
+ * GPIO11  Alt1   I    x   PerErr
+ * GPIO12  GPIO   O    0   ATMega !Reset
+ * GPIO13  GPIO   O    1   SPI Atmega !SS
+ * GPIO14  GPIO   O    1   Write protect EEPROM #1 (0xA8)
+ * GPIO15  GPIO   O    0   CPU Run LED !On
+ * GPIO16  Alt1   O    x   GMC1TxD0
+ * GPIO17  Alt1   O    x   GMC1TxD1
+ * GPIO18  Alt1   O    x   GMC1TxD2
+ * GPIO19  Alt1   O    x   GMC1TxD3
+ * GPIO20  Alt1   I    x   RejectPkt0
+ * GPIO21  Alt1   I    x   RejectPkt1
+ * GPIO22  GPIO   I    x   PGOOD_DDR
+ * GPIO23  Alt1   O    x   SCPD0
+ * GPIO24  Alt1   O    x   GMC0TxD2
+ * GPIO25  Alt1   O    x   GMC0TxD3
+ * GPIO26  GPIO? I/O   x   IIC0SDA (selected in SDR0_PFC4)
+ * GPIO27  GPIO   O    0   PHY #0 1000BASE-X select
+ * GPIO28  GPIO   O    0   PHY #1 1000BASE-X select
+ * GPIO29  GPIO   I    x   Test jumper !Present
+ * GPIO30  GPIO   I    x   SFP module #0 !Present
+ * GPIO31  GPIO   I    x   SFP module #1 !Present
+ *
+ * GPIO32  GPIO   O    1   SFP module #0 Tx !Enable
+ * GPIO33  GPIO   O    1   SFP module #1 Tx !Enable
+ * GPIO34  Alt2   I    x   !UART1_CTS
+ * GPIO35  Alt2   O    x   !UART1_RTS
+ * GPIO36  Alt1   I    x   !UART0_CTS
+ * GPIO37  Alt1   O    x   !UART0_RTS
+ * GPIO38  Alt2   O    x   UART1_Tx
+ * GPIO39  Alt2   I    x   UART1_Rx
+ * GPIO40  Alt1   I    x   IRQ0 (Ethernet 0)
+ * GPIO41  Alt1   I    x   IRQ1 (Ethernet 1)
+ * GPIO42  Alt1   I    x   IRQ2 (PCI interrupt)
+ * GPIO43  Alt1   I    x   IRQ3 (System Alert from CPLD)
+ * GPIO44  xxxx   x    x   (grounded through pulldown)
+ * GPIO45  GPIO   O    0   PHY #0 Enable
+ * GPIO46  GPIO   O    0   PHY #1 Enable
+ * GPIO47  GPIO   I    x   Reset switch !Pressed
+ * GPIO48  GPIO   I    x   Shutdown switch !Pressed
+ * GPIO49  xxxx   x    x   (reserved for trace port)
+ *   .      .     .    .               .
+ *   .      .     .    .               .
+ *   .      .     .    .               .
+ * GPIO63  xxxx   x    x   (reserved for trace port)
+*----------------------------------------------------------------------*/
+
+#define CFG_GPIO_ATMEGA_SS_	13
+#define CFG_GPIO_PHY0_FIBER_SEL	27
+#define CFG_GPIO_PHY1_FIBER_SEL	28
+#define CFG_GPIO_SFP0_PRESENT_	30
+#define CFG_GPIO_SFP1_PRESENT_	31
+#define CFG_GPIO_SFP0_TX_EN_	32
+#define CFG_GPIO_SFP1_TX_EN_	33
+#define CFG_GPIO_PHY0_EN	45
+#define CFG_GPIO_PHY1_EN	46
+
+/*-----------------------------------------------------------------------
+ * PPC440 GPIO Configuration
+ */
+#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+{											\
+/* GPIO Core 0 */									\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1	EBC_ADDR(6)	DMA_ACK(2)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2	EBC_ADDR(5)	DMA_EOT/TC(2)	*/	\
+{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO3	EBC_ADDR(4)	DMA_REQ(3)	*/	\
+{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO4	EBC_ADDR(3)	DMA_ACK(3)	*/	\
+{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO5	EBC_ADDR(2)	DMA_EOT/TC(3)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6	EBC_CS_N(1)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7	EBC_CS_N(2)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8	EBC_CS_N(3)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9	EBC_CS_N(4)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5)			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO13				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO16 GMCTxD(4)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO17 GMCTxD(5)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO18 GMCTxD(6)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO19 GMCTxD(7)			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO22				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO24 GMCTxD(2)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO25 GMCTxD(3)			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ	USB2D_RXERROR	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28		USB2D_TXVALID	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA	USB2D_PAD_SUSPNDM */	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK	USB2D_XCVRSELECT*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ	USB2D_TERMSELECT*/	\
+},											\
+{											\
+/* GPIO Core 1 */									\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0	EBC_DATA(2)	*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1	EBC_DATA(3)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N	UART1_DSR_CTS_N	UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0)	UART3_SIN*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO37 UART0_RTS_N	EBC_DATA(1)	UART3_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N	UART1_SOUT	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N	UART1_SIN	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4)	DMA_ACK(1)	*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6)	DMA_EOT/TC(1)	*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7)	DMA_REQ(0)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8)	DMA_ACK(0)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9)	DMA_EOT/TC(0)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63  Unselect via TraceSelect Bit	*/	\
+}											\
+}
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH     */
+#define BOOTFLAG_WARM	0x02	/* Software reboot                      */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use     */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/luan.h b/include/configs/luan.h
index a09dd74..cba7295 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -293,15 +293,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		(32<<10) /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 52deab4..c5c2724 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -71,15 +71,20 @@
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer
  *----------------------------------------------------------------------*/
-/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache	*/
-#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM			*/
-#define CFG_OCM_DATA_ADDR	CFG_OCM_BASE
-
+/*
+ * On LWMON5 we use D-cache as init-ram and stack pointer. We also move
+ * the POST_WORD from OCM to a 440EPx register that preserves it's
+ * content during reset (GPT0_COM6). This way we reserve the OCM (16k)
+ * for logbuffer only.
+ */
+#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
+#define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
 #define CFG_INIT_RAM_END	(4 << 10)
-#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data*/
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CFG_POST_ALT_WORD_ADDR	(CFG_PERIPHERAL_BASE + GPT0_COMP6)
+						/* unused GPT0 COMP reg	*/
 
 /*-----------------------------------------------------------------------
  * Serial Port
@@ -153,7 +158,7 @@
 				 CFG_POST_SPR      | \
 				 CFG_POST_UART)
 
-#define CFG_POST_CACHE_ADDR	0x10000000	/* free virtual address		*/
+#define CFG_POST_CACHE_ADDR	0x7fff0000 /* free virtual address	*/
 #define CONFIG_LOGBUFFER
 #define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
@@ -243,6 +248,18 @@
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
 #define CONFIG_PHY1_ADDR	1
 
+/* Video console */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_MB862xx
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define VIDEO_FB_16BPP_PIXEL_SWAP
+
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+
 /* USB */
 #ifdef CONFIG_440EPX
 #define CONFIG_USB_OHCI
@@ -289,6 +306,10 @@
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SDRAM
 
+#ifdef CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#endif
+
 #ifdef CONFIG_440EPX
 #define CONFIG_CMD_USB
 #endif
@@ -414,7 +435,7 @@
 /*-----------------------------------------------------------------------
  * PPC440 GPIO Configuration
  */
-#define CFG_440_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/	\
@@ -487,15 +508,6 @@
 }											\
 }
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- *----------------------------------------------------------------------*/
-#define CFG_DCACHE_SIZE		(32<<10)  /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	      /* ...			            */
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	      /* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/makalu.h b/include/configs/makalu.h
new file mode 100644
index 0000000..8f8e867
--- /dev/null
+++ b/include/configs/makalu.h
@@ -0,0 +1,397 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * makalu.h - configuration for AMCC Makalu (405EX)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_MAKALU		1		/* Board is Makalu	*/
+#define CONFIG_4xx		1		/* ... PPC4xx family	*/
+#define CONFIG_405EX		1		/* Specifc 405EX support*/
+#define CONFIG_SYS_CLK_FREQ	33330000	/* ext frequency to pll	*/
+
+#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0xFC000000
+#define CFG_FPGA_BASE		0xF0000000
+#define CFG_PERIPHERAL_BASE	0xEF600000      /* internal peripherals*/
+#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(512 * 1024)	/* Reserve 512 kB for malloc()	*/
+#define CFG_MONITOR_BASE	(TEXT_BASE)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR	0x02000000	/* inside of SDRAM	*/
+#define CFG_INIT_RAM_END	(4 << 10)
+#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+/* reserve some memory for POST and BOOT limit info */
+#define CFG_INIT_SP_OFFSET	(CFG_GBL_DATA_OFFSET - 16)
+
+/* extra data in init-ram */
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 4)
+#define CFG_POST_MAGIC		(CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 8)
+#define CFG_POST_VAL		(CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 12)
+#define CFG_OCM_DATA_ADDR	CFG_INIT_RAM_ADDR /* for commproc.c	*/
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK			/* no ext. clk		*/
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI     1
+/* define this if you want console on UART1 */
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE						\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
+#define CFG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
+
+#define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM	256
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
+#define CFG_I2C_EEPROM_ADDR	0x52	/* I2C boot EEPROM (24C02BN)	*/
+#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
+
+/* Standard DTT sensor configuration */
+#define CONFIG_DTT_DS1775	1
+#define CONFIG_DTT_SENSORS	{ 0 }
+#define CFG_I2C_DTT_ADDR	0x48
+
+/* RTC configuration */
+#define CONFIG_RTC_X1205	1
+#define CFG_I2C_RTC_ADDR	0x6f
+
+/*-----------------------------------------------------------------------
+ * Ethernet
+ *----------------------------------------------------------------------*/
+#define CONFIG_M88E1111_PHY	1
+#define CONFIG_IBM_EMAC4_V4	1
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_PHY_ADDR		6	/* PHY address, See schematics	*/
+
+#define CONFIG_PHY_RESET	1	/* reset phy upon startup	*/
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0		1
+
+#define CONFIG_NET_MULTI	1
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"   */
+#define CONFIG_PHY1_ADDR	0
+
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"logversion=2\0"						\
+	"netdev=eth0\0"							\
+	"hostname=makalu\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"addmisc=setenv bootargs ${bootargs} rtc-x1205.probe=0,0x6f\0"	\
+	"net_nfs=tftp 200000 ${bootfile};"				\
+		"run nfsargs addip addtty addmisc;"			\
+		"bootm 200000\0"					\
+	"net_nfs_fdt=tftp 200000 ${bootfile};"				\
+		"tftp ${fdt_addr} ${fdt_file};"				\
+		"run nfsargs addip addtty addmisc;"			\
+		"bootm 200000 - ${fdt_addr}\0"				\
+	"flash_nfs=run nfsargs addip addtty addmisc;"			\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty addmisc;"			\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=makalu/uImage\0"					\
+	"fdt_file=makalu/makalu.dtb\0"					\
+	"fdt_addr=400000\0"						\
+	"kernel_addr=fc000000\0"					\
+	"ramdisk_addr=fc200000\0"					\
+	"initrd_high=30000000\0"					\
+	"load=tftp 200000 makalu/u-boot.bin\0"				\
+	"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;"	\
+		"cp.b ${fileaddr} fffa0000 ${filesize};"		\
+		"setenv filesize;saveenv\0"				\
+	"upd=run load update\0"						\
+	"pciconfighost=1\0"						\
+	"pcie_mode=RP:RP\0"						\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate change	*/
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOG
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
+/* POST support */
+#define CONFIG_POST		(CFG_POST_MEMORY	| \
+				 CFG_POST_CACHE		| \
+				 CFG_POST_CPU		| \
+				 CFG_POST_ETHER		| \
+				 CFG_POST_I2C		| \
+				 CFG_POST_MEMORY	| \
+				 CFG_POST_UART)
+
+/* Define here the base-addresses of the UARTs to test in POST */
+#define CFG_POST_UART_TABLE	{UART0_BASE, UART1_BASE}
+
+#define CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
+
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	        16	/* max number of command args	*/
+#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+
+#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+#define CONFIG_PCI			/* include pci support	        */
+#define CONFIG_PCI_PNP		1	/* do pci plug-and-play		*/
+#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
+
+/*-----------------------------------------------------------------------
+ * PCIe stuff
+ *----------------------------------------------------------------------*/
+#define CFG_PCIE_MEMBASE	0x90000000	/* mapped PCIe memory	*/
+#define CFG_PCIE_MEMSIZE	0x08000000      /* 128 Meg, smallest incr per port */
+
+#define	CFG_PCIE0_CFGBASE	0xa0000000      /* remote access */
+#define	CFG_PCIE0_XCFGBASE	0xb0000000      /* local access */
+#define	CFG_PCIE0_CFGMASK	0xe0000001      /* 512 Meg */
+
+#define	CFG_PCIE1_CFGBASE	0xc0000000      /* remote access */
+#define	CFG_PCIE1_XCFGBASE	0xd0000000      /* local access */
+#define	CFG_PCIE1_CFGMASK	0xe0000001      /* 512 Meg */
+
+#define	CFG_PCIE0_UTLBASE	0xef502000
+#define	CFG_PCIE1_UTLBASE	0xef503000
+
+/* base address of inbound PCIe window */
+#define CFG_PCIE_INBOUND_BASE	0x0000000000000000ULL
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+/* Memory Bank 0 (NOR-FLASH) initialization					*/
+#define CFG_EBC_PB0AP		0x08033700
+#define CFG_EBC_PB0CR		(CFG_FLASH_BASE | 0xda000)
+
+/* Memory Bank 2 (CPLD) initialization						*/
+#define CFG_EBC_PB2AP           0x9400C800
+#define CFG_EBC_PB2CR           0xF0018000 /*  BAS=0x800,BS=1MB,BU=R/W,BW=8bit	*/
+
+#define CFG_EBC_CFG		0x7FC00000 /*  EBC0_CFG */
+
+/*-----------------------------------------------------------------------
+ * GPIO Setup
+ *----------------------------------------------------------------------*/
+#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+{											\
+/* GPIO Core 0 */									\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO0	EBC_DATA_PAR(0)			*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO1	EBC_DATA_PAR(1)			*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO2	EBC_DATA_PAR(2)			*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO3	EBC_DATA_PAR(3)			*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO4	EBC_DATA(20)	USB2_DATA(4)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO5	EBC_DATA(21)	USB2_DATA(5)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO6	EBC_DATA(22)	USB2_DATA(6)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO7	EBC_DATA(23)	USB2_DATA(7)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8	CS(1)/NFCE(1)	IRQ(7)		*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9	CS(2)/NFCE(2)	IRQ(8)		*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 CS(3)/NFCE(3)	IRQ(9)		*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 IRQ(6)				*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO12 EBC_DATA(16)	USB2_DATA(0)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO13 EBC_DATA(17)	USB2_DATA(1)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO14 EBC_DATA(18)	USB2_DATA(2)	*/	\
+{GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO15 EBC_DATA(19)	USB2_DATA(3)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 UART0_DCD	UART1_CTS	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 UART0_DSR	UART1_RTS	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 UART0_CTS			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 UART0_RTS			*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO20 UART0_DTR	UART1_TX	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO21 UART0_RI	UART1_RX	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO22 EBC_HOLD_REQ	DMA_ACK2	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_0}, /* GPIO23 EBC_HOLD_ACK	DMA_REQ2	*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO24 EBC_EXT_REQ	DMA_EOT2	IRQ(4) */ \
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO25 EBC_EXT_ACK	DMA_ACK3	IRQ(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 EBC_ADDR(5)	DMA_EOT0	TS(3) */ \
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EBC_BUS_REQ	DMA_EOT3	IRQ(5) */ \
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL , GPIO_OUT_0}, /* GPIO28				*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO29 DMA_EOT1	IRQ(2)		*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO30 DMA_REQ1	IRQ(1)		*/	\
+{GPIO0_BASE, GPIO_IN,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO31 DMA_ACK1	IRQ(0)		*/	\
+}												\
+}
+
+#define CFG_GPIO_PCIE_RST	23
+#define CFG_GPIO_PCIE_CLKREQ	27
+#define CFG_GPIO_PCIE_WAKE	28
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
new file mode 100644
index 0000000..3de2466
--- /dev/null
+++ b/include/configs/mgcoge.h
@@ -0,0 +1,317 @@
+/*
+ * (C) Copyright 2007
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC8247		1
+#define CONFIG_MPC8272_FAMILY   1
+#define CONFIG_MGCOGE		1
+
+#define CONFIG_CPM2		1	/* Has a CPM2 */
+
+#undef DEBUG
+
+/*
+ * Select serial console configuration
+ *
+ * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ */
+#define	CONFIG_CONS_ON_SMC		/* Console is on SMC         */
+#undef  CONFIG_CONS_ON_SCC		/* It's not on SCC           */
+#undef	CONFIG_CONS_NONE		/* It's not on external UART */
+#define CONFIG_CONS_INDEX	2	/* SMC2 is used for console  */
+
+/*
+ * Select ethernet configuration
+ *
+ * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
+ * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
+ * SCC, 1-3 for FCC)
+ *
+ * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
+ */
+#define	CONFIG_ETHER_ON_SCC		/* Ethernet is on SCC */
+#undef	CONFIG_ETHER_ON_FCC		/* Ethernet is not on FCC     */
+#undef	CONFIG_ETHER_NONE		/* No external Ethernet   */
+
+#define CONFIG_ETHER_INDEX	4
+#define CFG_SCC_TOUT_LOOP	10000000
+
+# define CFG_CMXSCR_VALUE	(CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8)
+
+#ifndef CONFIG_8260_CLKIN
+#define CONFIG_8260_CLKIN	66000000	/* in Hz */
+#endif
+
+#define CONFIG_BAUDRATE		115200
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
+/*
+ * Default environment settings
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"u-boot_addr=100000\0"						\
+	"kernel_addr=200000\0"						\
+	"fdt_addr=400000\0"						\
+	"rootpath=/opt/eldk-4.2/ppc_82xx\0"				\
+	"u-boot=/tftpboot/mgcoge/u-boot.bin\0"				\
+	"bootfile=/tftpboot/mgcoge/uImage\0"				\
+	"fdt_file=/tftpboot/mgcoge/mgcoge.dtb\0"			\
+	"load=tftp ${u-boot_addr} ${u-boot}\0"				\
+	"update=prot off fe000000 fe03ffff; era fe000000 fe03ffff; "	\
+		"cp.b ${u-boot_addr} fe000000 ${filesize};"		\
+		"prot on fe000000 fe03ffff\0"				\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"addcon=setenv bootargs ${bootargs} console=ttyCPM0,,${baudrate}\0"	\
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
+		"${netmask}:${hostname}:${netdev}:off panic=1 "		\
+		"console=${console}\0"					\
+	"net_nfs=tftp ${kernel_addr} ${bootfile}; "			\
+		"tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcon;"\
+		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
+	"net_self=tftp ${kernel_addr} ${bootfile}; "			\
+		"tftp ${fdt_addr} ${fdt_file}; "			\
+		"tftp ${ramdisk_addr} ${ramdisk_file}; "		\
+		"run ramargs addip; "					\
+		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
+	""
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+
+#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+#define CFG_LONGHELP			/* undef to save memory	    */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size  */
+#define CFG_MAXARGS		16		/* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size  */
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0xFE000000
+#define CFG_FLASH_SIZE		32
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
+#define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256KB for Monitor */
+
+#define CFG_ENV_IS_IN_FLASH
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+#define CFG_IMMR		0xF0000000
+
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/* Hard reset configuration word */
+#define CFG_HRCW_MASTER		0x0604b211
+
+/* No slaves */
+#define CFG_HRCW_SLAVE1 	0
+#define CFG_HRCW_SLAVE2 	0
+#define CFG_HRCW_SLAVE3 	0
+#define CFG_HRCW_SLAVE4 	0
+#define CFG_HRCW_SLAVE5 	0
+#define CFG_HRCW_SLAVE6 	0
+#define CFG_HRCW_SLAVE7 	0
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM		0x02	/* Software reboot                  */
+
+#define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+#define CFG_HID0_INIT		0
+#define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
+
+#define CFG_HID2		0
+
+#define CFG_SIUMCR		0x4020c200
+#define CFG_SYPCR		0xFFFFFFC3
+#define CFG_BCR			0x10000000
+#define CFG_SCCR		(SCCR_PCI_MODE | SCCR_PCI_MODCK)
+
+/*-----------------------------------------------------------------------
+ * RMR - Reset Mode Register                                     5-5
+ *-----------------------------------------------------------------------
+ * turn on Checkstop Reset Enable
+ */
+#define CFG_RMR         0
+
+/*-----------------------------------------------------------------------
+ * TMCNTSC - Time Counter Status and Control                     4-40
+ *-----------------------------------------------------------------------
+ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
+ * and enable Time Counter
+ */
+#define CFG_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control                 4-42
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
+ * Periodic timer
+ */
+#define CFG_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration                         13-7
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RCCR        0
+
+/*
+ * Init Memory Controller:
+ *
+ * Bank Bus     Machine PortSz  Device
+ * ---- ---     ------- ------  ------
+ *  0   60x     GPCM     8 bit  FLASH
+ *  1   60x     SDRAM   32 bit  SDRAM
+ *
+ */
+/* Bank 0 - FLASH
+ */
+#define CFG_BR0_PRELIM  ((CFG_FLASH_BASE & BRx_BA_MSK)	|\
+			 BRx_PS_8			|\
+			 BRx_MS_GPCM_P			|\
+			 BRx_V)
+
+#define CFG_OR0_PRELIM  (MEG_TO_AM(CFG_FLASH_SIZE)	|\
+			 ORxG_CSNT			|\
+			 ORxG_ACS_DIV2			|\
+			 ORxG_SCY_5_CLK			|\
+			 ORxG_TRLX )
+
+
+/* Bank 1 - 60x bus SDRAM
+ */
+#define SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
+#define CFG_GLOBAL_SDRAM_LIMIT	(256 << 20)	/* less than 256 MB */
+
+#define CFG_MPTPR       0x1800
+
+/*-----------------------------------------------------------------------------
+ * Address for Mode Register Set (MRS) command
+ *-----------------------------------------------------------------------------
+ */
+#define CFG_MRS_OFFS	0x00000110
+#define CFG_PSRT        0x0e
+
+#define CFG_BR1_PRELIM  ((CFG_SDRAM_BASE & BRx_BA_MSK)  |\
+			 BRx_PS_64                      |\
+			 BRx_MS_SDRAM_P                 |\
+			 BRx_V)
+
+#define CFG_OR1_PRELIM	CFG_OR1
+
+/* SDRAM initialization values
+*/
+
+#define CFG_OR1    ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+			 ORxS_BPD_8                     |\
+			 ORxS_ROWST_PBI0_A7		|\
+			 ORxS_NUMR_13)
+
+#define CFG_PSDMR  (PSDMR_SDAM_A14_IS_A5 |\
+			 PSDMR_BSMA_A14_A16           |\
+			 PSDMR_SDA10_PBI0_A9		|\
+			 PSDMR_RFRC_5_CLK               |\
+			 PSDMR_PRETOACT_2W              |\
+			 PSDMR_ACTTORW_2W               |\
+			 PSDMR_LDOTOPRE_1C              |\
+			 PSDMR_WRC_1C                   |\
+			 PSDMR_CL_2)
+
+#define	CFG_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#define OF_CPU			"PowerPC,8247@0"
+#define OF_SOC			"soc@f0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc/cpm/serial@11a90"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
new file mode 100644
index 0000000..13e7a7c
--- /dev/null
+++ b/include/configs/mgsuvd.h
@@ -0,0 +1,325 @@
+/*
+ * (C) Copyright 2007
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC866		1	/* This is a MPC866 CPU		*/
+#define CONFIG_MGSUVD		1	/* ...on a mgsuvd board	*/
+
+#define CONFIG_8xx_GCLK_FREQ		66000000
+
+#define CFG_SMC_UCODE_PATCH	1	/* Relocate SMC1 */
+#define CFG_SMC_DPMEM_OFFSET	0x1fc0
+#define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+
+#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
+
+#define CONFIG_BOOTCOUNT_LIMIT
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_BOARD_TYPES	1	/* support board types		*/
+
+#define CONFIG_PREBOOT	"echo;" \
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"addcon=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0"	\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip;"					\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp ${kernel_addr} ${bootfile}; "			\
+		"tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcon;"\
+		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
+	"rootpath=/opt/eldk/ppc_8xx\0"					\
+	"bootfile=/tftpboot/mgsuvd/uImage\0"				\
+	"fdt_addr=400000\0"						\
+	"kernel_addr=200000\0"						\
+	"fdt_file=/tftpboot/mgsuvd/mgsuvd.dtb\0"			\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=protect off f0000000 +${filesize};"			\
+		"erase f0000000 +${filesize};"				\
+		"cp.b 200000 f0000000 ${filesize};"			\
+		"protect on f0000000 +${filesize}\0"			\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+#undef CONFIG_RTC_MPC8xx		/* MPC866 does not support RTC	*/
+
+#define	CONFIG_TIMESTAMP		/* but print image timestmps	*/
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CFG_HUSH_PARSER
+#define	CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16	/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFFF00000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0xf0000000
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_FLASH_SIZE		32
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */
+
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
+#define CFG_ENV_SIZE		0x08000 /* Total Size of Environment Sector	*/
+#define CFG_ENV_SECT_SIZE	0x40000 /* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#define CFG_SYPCR	0xffffff89
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ */
+#define CFG_SIUMCR	0x00610480
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	0x01800000
+#define CFG_SCCR	0x01800000
+
+#define CFG_DER 0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM	0xf0000000	/* FLASH bank #0	*/
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+
+/*
+ * FLASH timing: Default value of OR0 after reset
+ */
+#define CFG_OR0_PRELIM	0xfe000954
+#define CFG_BR0_PRELIM	0xf0000401
+
+/*
+ * BR1 and OR1 (SDRAM)
+ *
+ */
+#define SDRAM_BASE1_PRELIM	0x00000000	/* SDRAM bank #0	*/
+#define SDRAM_MAX_SIZE		(64 << 20)	/* max 64 MB per bank	*/
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
+#define CFG_OR_TIMING_SDRAM	0x00000A00
+
+#define CFG_OR1_PRELIM	0xfc000800
+#define CFG_BR1_PRELIM	(0x000000C0 | 0x01)
+
+#define CFG_MPTPR	0x0200
+/* PTB=16, AMB=001, FIXME 1 RAS precharge cycles, 1 READ loop cycle (not used),
+   1 Write loop Cycle (not used), 1 Timer Loop Cycle */
+#define CFG_MBMR	0x10964111
+#define CFG_MAR		0x00000088
+
+/*
+ * 4096	Rows from SDRAM example configuration
+ * 1000	factor s -> ms
+ * 64	PTP (pre-divider from MPTPR) from SDRAM example configuration
+ * 4	Number of refresh cycles per period
+ * 64	Refresh cycle in ms per number of rows
+ */
+#define CFG_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
+/* HS HS noch zu setzen */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#define CONFIG_SCC3_ENET
+#define CONFIG_ETHPRIME		"SCC ETHERNET"
+#define CONFIG_HAS_ETH0
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#define OF_CPU			"PowerPC,866@0"
+#define OF_SOC			"soc@f0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc/cpm/serial@a80"
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index 0183041..1945918 100644
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -160,12 +160,6 @@
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-
-/*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 
diff --git a/include/configs/munices.h b/include/configs/munices.h
new file mode 100644
index 0000000..2372b57
--- /dev/null
+++ b/include/configs/munices.h
@@ -0,0 +1,215 @@
+/*
+ * (C) Copyright 2007
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
+#define CONFIG_MPC5200_DDR	1	/* (with DDR-SDRAM) */
+#define CONFIG_MUNICES		1	/* ... on MUNICes board */
+#define CFG_MPC5XXX_CLKIN	33333333 /* ... running at 33.333333MHz */
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
+#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
+#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
+#define CONFIG_BOOTDELAY	5   /* autoboot after 5 seconds */
+#undef	CONFIG_BOOTARGS
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run net_nfs\" to load Kernel over TFTP and to mount root filesystem over NFS;" \
+	"echo"
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$(serverip):$(rootpath)\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs $(bootargs) "				\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
+		":$(hostname):$(netdev):off panic=5\0"			\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm $(kernel_addr)\0"				\
+	"flash_self=run ramargs addip;"					\
+		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
+	"rootpath=/opt/eldk/ppc_6xx\0"					\
+	"bootfile=/tftpboot/munices/u-boot.bin\0"			\
+	"update=tftpboot 200000 ${bootfile};protect off fff00000 fff3ffff;" \
+	"erase fff00000 fff3ffff; cp.b 200000 FFF00000 ${filesize}\0"	\
+	""
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define  CFG_IPBSPEED_133		/* define for 133MHz speed */
+#if defined(CFG_IPBSPEED_133)
+/*
+ * PCI Bus clocking configuration
+ *
+ * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
+ * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
+ * been tested with a IPB Bus Clock of 66 MHz.
+ */
+#define CFG_PCISPEED_66		/* define for 66MHz speed */
+#else
+#undef CFG_PCISPEED_66			/* for 33MHz speed */
+#endif
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR		0xF0000000 /* MBAR hast to be switched by other bootloader or debugger config  */
+
+#define CFG_DEFAULT_MBAR	0x80000000
+#define CFG_SDRAM_BASE		0x00000000
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE    TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT		1
+#endif
+
+#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_BASE		0xFF000000
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_SIZE		0x01000000 /* 16 MByte */
+#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CFG_MAX_FLASH_BANKS	1	 /* max num of flash banks (= chip selects) */
+#define CFG_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
+
+/*
+ * Chip selects configuration
+ */
+/* Boot Chipselect */
+#define CFG_BOOTCS_START	CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG		0x00047800
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_OFFSET		0x40000
+#define CFG_ENV_ADDR		(TEXT_BASE + CFG_ENV_OFFSET)
+#define CFG_ENV_SECT_SIZE	0x20000
+#define CFG_ENV_SIZE		0x4000
+#define CFG_ENV_OFFSET_REDUND   (CFG_ENV_OFFSET + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR_REDUND	(TEXT_BASE + CFG_ENV_OFFSET_REDUND)
+#define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
+#define CONFIG_ENV_OVERWRITE	1
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC	1
+#define CONFIG_PHY_ADDR		0x01
+#define CONFIG_MII		1
+
+/*
+ * GPIO configuration
+ */
+#define CFG_GPS_PORT_CONFIG	0x00058044 /* PSC1=UART, PSC2=UART ; Ether=100MBit with MD
+						no PCI */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	    */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x200000	/* default load address */
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CONFIG_DISPLAY_BOARDINFO 1
+#define CONFIG_CMDLINE_EDITING  1
+
+/*
+ * Various low-level settings
+ */
+#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL		HID0_ICE
+
+#define CFG_CS_BURST		0x00000000
+#define CFG_CS_DEADCYCLE	0x33333333
+#define CFG_RESET_ADDRESS	0xff000000
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#define OF_CPU			"PowerPC,5200@0"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_SOC                  "soc5200@f0000000"
+#define OF_STDOUT_PATH		"/soc5200@f0000000/serial@2000"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index bc2fd33..fd4d3af 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -317,14 +317,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		32768	/* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
 
 /*
  * Internal Definitions
diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 8623ed3..0be46ea 100644
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -179,7 +179,7 @@
  * FLASH driver setup
  */
 #define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/mtd/cfi_flash.c */
 #define CFG_FLASH_USE_BUFFER_WRITE	1	/* Use buffered writes (~10x faster) */
 #define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
 
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 8ae8efe..88a3f6e 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -283,7 +283,7 @@
  * CFI FLASH driver setup
  */
 #define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/mtd/cfi_flash.c */
 #define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
 #define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
 
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 16ce2f6..e3bde4f 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -174,7 +174,7 @@
  * FLASH driver setup
  */
 #define CFG_FLASH_CFI          1       /* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER   1       /* Use drivers/cfi_flash.c */
+#define CFG_FLASH_CFI_DRIVER   1       /* Use drivers/mtd/cfi_flash.c */
 
 #define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
 
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 51f19a1..255e072 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -311,14 +311,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		(32<<10)	/* For AMCC 405 CPUs		*/
-#define CFG_CACHELINE_SIZE	32	/* ...					*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
 
 /*
  * Internal Definitions
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 7653ba1..d66f4bd 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -365,7 +365,7 @@
 /*-----------------------------------------------------------------------
  * PPC440 GPIO Configuration
  */
-#define CFG_440_GPIO_TABLE { /*	  Out		       GPIO	Alternate1	Alternate2   Alternate3 */ \
+#define CFG_4xx_GPIO_TABLE { /*	  Out		       GPIO	Alternate1	Alternate2   Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG},  /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/ \
@@ -438,15 +438,6 @@
 }											\
 }
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		(32<<10) /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index dc906b1..60d401f 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -234,16 +234,6 @@
 #define CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...					*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 #define FLASH0_BA	CFG_FLASH_BASE		/* FLASH 0 Base Address		*/
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index e7d8a5a..4cc4ff1 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -310,13 +310,9 @@
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8349@0"
-#define OF_SOC			"soc8349@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8349@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support*/
@@ -458,7 +454,7 @@
 #define CONFIG_CMD_PING
 
 #if defined(CONFIG_PCI)
-    #define CONFG_CMD_PCI
+    #define CONFIG_CMD_PCI
 #endif
 
 #if defined(CFG_RAMBOOT)
@@ -494,13 +490,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 #define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
 
 #if 1 /*528/264*/
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
new file mode 100644
index 0000000..c050a06
--- /dev/null
+++ b/include/configs/sbc8548.h
@@ -0,0 +1,569 @@
+/*
+ * Copyright 2007 Wind River Systems <www.windriver.com>
+ * Copyright 2007 Embedded Specialties, Inc.
+ * Copyright 2004, 2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * sbc8548 board configuration file
+ *
+ * Please refer to doc/README.sbc85xx for more info.
+ *
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE		1	/* BOOKE */
+#define CONFIG_E500		1	/* BOOKE e500 family */
+#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48 */
+#define CONFIG_MPC8548		1	/* MPC8548 specific */
+#define CONFIG_SBC8548		1	/* SBC8548 board specific */
+
+#undef CONFIG_PCI		/* enable any pci type devices */
+#undef CONFIG_PCI1		/* PCI controller 1 */
+#undef CONFIG_PCIE1		/* PCIE controler 1 (slot 1) */
+#undef CONFIG_RIO
+#undef CONFIG_PCI2
+#undef CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET		/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#undef CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
+#define CONFIG_DDR_DLL			/* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+
+#undef CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
+
+
+#define MPC85xx_DDR_SDRAM_CLK_CNTL	/* 85xx has clock control reg */
+
+#define CONFIG_SYS_CLK_FREQ	66000000 /* SBC8548 default SYSCLK */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE			/* toggle L2 cache */
+#define CONFIG_BTB			/* toggle branch predition */
+#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
+#define CONFIG_CLEAR_LAW0		/* Clear LAW0 in cpu_init_r */
+
+/*
+ * Only possible on E500 Version 2 or newer cores.
+ */
+#define CONFIG_ENABLE_36BIT_PHYS	1
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+
+#undef	CFG_DRAM_TEST			/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00400000
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+
+#define CFG_PCI1_ADDR	(CFG_CCSRBAR+0x8000)
+#define CFG_PCI2_ADDR	(CFG_CCSRBAR+0x9000)
+#define CFG_PCIE1_ADDR	(CFG_CCSRBAR+0xa000)
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+
+#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+
+/*
+ * Make sure required options are set
+ */
+#ifndef CONFIG_SPD_EEPROM
+	#define CFG_SDRAM_SIZE	256		/* DDR is 256MB */
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/*
+ * FLASH on the Local Bus
+ * Two banks, one 8MB the other 64MB, using the CFI driver.
+ * Boot from BR0/OR0 bank at 0xff80_0000
+ * Alternate BR6/OR6 bank at 0xfb80_0000
+ *
+ * BR0:
+ *    Base address 0 = 0xff80_0000 = BR0[0:16] = 1111 1111 1000 0000 0
+ *    Port Size = 8 bits = BRx[19:20] = 01
+ *    Use GPCM = BRx[24:26] = 000
+ *    Valid = BRx[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0000 1000 0000 0001 = ff800801    BR0
+ *
+ * BR6:
+ *    Base address 6 = 0xfb80_0000 = BR6[0:16] = 1111 1011 1000 0000 0
+ *    Port Size = 32 bits = BRx[19:20] = 11
+ *    Use GPCM = BRx[24:26] = 000
+ *    Valid = BRx[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1011 1000 0000 0001 1000 0000 0001 = fb801801    BR6
+ *
+ * OR0:
+ *    Addr Mask = 8M = OR1[0:16] = 1111 1111 1000 0000 0
+ *    XAM = OR0[17:18] = 11
+ *    CSNT = OR0[20] = 1
+ *    ACS = half cycle delay = OR0[21:22] = 11
+ *    SCY = 6 = OR0[24:27] = 0110
+ *    TRLX = use relaxed timing = OR0[29] = 1
+ *    EAD = use external address latch delay = OR0[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    OR0
+ *
+ * OR6:
+ *    Addr Mask = 64M = OR6[0:16] = 1111 1100 0000 0000 0
+ *    XAM = OR6[17:18] = 11
+ *    CSNT = OR6[20] = 1
+ *    ACS = half cycle delay = OR6[21:22] = 11
+ *    SCY = 6 = OR6[24:27] = 0110
+ *    TRLX = use relaxed timing = OR6[29] = 1
+ *    EAD = use external address latch delay = OR6[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1110 0110 0101 = fc006e65    OR6
+ */
+
+#define CFG_BOOT_BLOCK		0xff800000	/* start of 8MB Flash */
+#define CFG_FLASH_BASE		CFG_BOOT_BLOCK	/* start of FLASH 16M */
+
+#define CFG_BR0_PRELIM		0xff800801
+#define CFG_BR6_PRELIM		0xfb801801
+
+#define	CFG_OR0_PRELIM		0xff806e65
+#define	CFG_OR6_PRELIM		0xfc006e65
+
+#define CFG_FLASH_BANKS_LIST	{0xff800000, CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
+#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+/* CS5 = Local bus peripherals controlled by the EPLD */
+
+#define CFG_BR5_PRELIM		0xf8000801
+#define CFG_OR5_PRELIM		0xff006e65
+#define CFG_EPLD_BASE		0xf8000000
+#define CFG_LED_DISP_BASE	0xf8000000
+#define CFG_USER_SWITCHES_BASE	0xf8100000
+#define CFG_BD_REV		0xf8300000
+#define CFG_EEPROM_BASE		0xf8b00000
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+/*
+ * Base Register 3 and Option Register 3 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR3, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port-size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ */
+
+#define CFG_BR3_PRELIM		0xf0001861
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR3, need:
+ *    64MB mask for AM, OR3[0:7] = 1111 1100
+ *		   XAM, OR3[17:18] = 11
+ *    10 columns OR3[19-21] = 011
+ *    12 rows   OR3[23-25] = 011
+ *    EAD set for extra time OR[31] = 0
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0
+ */
+
+#define CFG_OR3_PRELIM		0xfc006cc0
+
+#define CFG_LBC_LCRR		0x00000002    /* LB clock ratio reg */
+#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
+#define CFG_LBC_LSRT		0x20000000  /* LB sdram refresh timer */
+#define CFG_LBC_MRTPR		0x00000000  /* LB refresh timer prescal*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+/*
+ * Common settings for all Local Bus SDRAM commands.
+ * At run time, either BSMA1516 (for CPU 1.1)
+ *                  or BSMA1617 (for CPU 1.0) (old)
+ * is OR'ed in too.
+ */
+#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_RFCR16		\
+				| CFG_LBC_LSDMR_PRETOACT7	\
+				| CFG_LBC_LSDMR_ACTTORW7	\
+				| CFG_LBC_LSDMR_BL8		\
+				| CFG_LBC_LSDMR_WRC4		\
+				| CFG_LBC_LSDMR_CL3		\
+				| CFG_LBC_LSDMR_RFEN		\
+				)
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+
+#define CFG_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */
+
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		400000000 /* get_bus_freq(0) */
+
+#define CFG_BAUDRATE_TABLE \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_EEPROM_ADDR	0x50
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_OFFSET		0x3000
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+#define CFG_PCI_PHYS		0x80000000	/* 1G PCI TLB */
+
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
+
+#ifdef CONFIG_PCI2
+#define CFG_PCI2_MEM_BASE	0xa0000000
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	0xe2800000
+#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
+#endif
+
+#ifdef CONFIG_PCIE1
+#define CFG_PCIE1_MEM_BASE	0xa0000000
+#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCIE1_IO_BASE	0x00000000
+#define CFG_PCIE1_IO_PHYS	0xe3000000
+#define CFG_PCIE1_IO_SIZE	0x00100000	/*   1M */
+#endif
+
+#ifdef CONFIG_RIO
+/*
+ * RapidIO MMU
+ */
+#define CFG_RIO_MEM_BASE	0xC0000000
+#define CFG_RIO_MEM_SIZE	0x20000000	/* 512M */
+#endif
+
+#ifdef CONFIG_LEGACY
+#define BRIDGE_ID 17
+#define VIA_ID 2
+#else
+#define BRIDGE_ID 28
+#define VIA_ID 4
+#endif
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP			/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS	0x00000000
+#define CFG_PCI_MEMORY_PHYS	0x00000000
+#define CFG_PCI_MEMORY_SIZE	0x80000000
+
+#endif	/* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+#define CONFIG_MII		1	/* MII PHY management */
+#define CONFIG_TSEC1	1
+#define CONFIG_TSEC1_NAME	"eTSEC0"
+#define CONFIG_TSEC2	1
+#define CONFIG_TSEC2_NAME	"eTSEC1"
+#define CONFIG_TSEC3	1
+#define CONFIG_TSEC3_NAME	"eTSEC2"
+#define CONFIG_TSEC4
+#define CONFIG_TSEC4_NAME	"eTSEC3"
+#undef CONFIG_MPC85XX_FEC
+
+#define TSEC1_PHY_ADDR		0
+#define TSEC2_PHY_ADDR		1
+#define TSEC3_PHY_ADDR		2
+#define TSEC4_PHY_ADDR		3
+
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define TSEC3_PHYIDX		0
+#define TSEC4_PHYIDX		0
+#define TSEC1_FLAGS		TSEC_GIGABIT
+#define TSEC2_FLAGS		TSEC_GIGABIT
+#define TSEC3_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC4_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+
+/* Options are: eTSEC[0-3] */
+#define CONFIG_ETHPRIME		"eTSEC0"
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+#endif	/* CONFIG_TSEC_ENET */
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#define CFG_ENV_SIZE		0x2000
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR	 02:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR	 02:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR	 02:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR	 02:E0:0C:00:03:FD
+#endif
+
+#define CONFIG_IPADDR	 192.168.0.55
+
+#define CONFIG_HOSTNAME	 sbc8548
+#define CONFIG_ROOTPATH	 /opt/eldk/ppc_85xx
+#define CONFIG_BOOTFILE	 /uImage
+#define CONFIG_UBOOTPATH /u-boot.bin	/* TFTP server */
+
+#define CONFIG_SERVERIP	 192.168.0.2
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_NETMASK	 255.255.255.0
+
+#define CONFIG_LOADADDR	1000000	/*default location for tftp and bootm*/
+
+#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
+#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs*/
+
+#define CONFIG_BAUDRATE	115200
+
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+ "netdev=eth0\0"						\
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
+ "tftpflash=tftpboot $loadaddr $uboot; "			\
+	"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
+	"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
+	"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
+	"protect on " MK_STR(TEXT_BASE) " +$filesize; "		\
+	"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
+ "consoledev=ttyS0\0"				\
+ "ramdiskaddr=2000000\0"			\
+ "ramdiskfile=uRamdisk\0"			\
+ "fdtaddr=c00000\0"				\
+ "fdtfile=sbc8548.dtb\0"
+
+#define CONFIG_NFSBOOTCOMMAND						\
+   "setenv bootargs root=/dev/nfs rw "					\
+      "nfsroot=$serverip:$rootpath "					\
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
+
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "setenv bootargs root=/dev/ram rw "					\
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $ramdiskaddr $ramdiskfile;"					\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND	CONFIG_RAMBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index defc428..b71ba78 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -377,13 +377,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-  #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index cb22536..0a03c0e 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -433,24 +433,6 @@ extern unsigned long offsetOfEnvironment;
 #define CONFIG_JFFS2_PART_SIZE		0x01000000
 #define CONFIG_JFFS2_PART_OFFSET	0x00000000
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- *
- * CFG_DCACHE_SIZE -> size of data cache:
- * - 405GP 8k
- * - 405GPr 16k
- * How to handle the difference in chache size?
- * CFG_CACHELINE_SIZE -> size of one cache line: 32 bytes
- * (used in cpu/ppc4xx/start.S)
-*/
-#define CFG_DCACHE_SIZE    16384
-
-#define CFG_CACHELINE_SIZE 32
-
-#if defined(CONFIG_CMD_KGDB)
- #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 600f98c..056c288 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -43,6 +43,14 @@
 #define CONFIG_SYS_CLK_FREQ    ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \
 				33333333 : 33000000)
 
+#if 0
+/*
+ * 44x dcache supported is working now on sequoia, but we don't enable
+ * it yet since it needs further testing
+ */
+#define CONFIG_4xx_DCACHE			/* enable dcache	*/
+#endif
+
 #define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
 #define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
 
@@ -53,6 +61,7 @@
 #define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
 #define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
 
+#define CFG_TLB_FOR_BOOT_FLASH	0x0003
 #define CFG_BOOT_BASE_ADDR	0xf0000000
 #define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
 #define CFG_FLASH_BASE		0xfc000000	/* start of FLASH	*/
@@ -293,8 +302,15 @@
 
 /* USB */
 #ifdef CONFIG_440EPX
-#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_STORAGE
+#define CFG_OHCI_BE_CONTROLLER
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT	1
+#define CFG_USB_OHCI_REGS_BASE	CFG_USB_HOST
+#define CFG_USB_OHCI_SLOT_NAME	"ppc440"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
 
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
@@ -314,6 +330,7 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_SUBNETMASK
 
 
 /*
@@ -361,7 +378,7 @@
 
 #define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
 #define CONFIG_LOGBUFFER
-#define CFG_POST_CACHE_ADDR	0x10000000 /* free virtual address	*/
+#define CFG_POST_CACHE_ADDR	0x7fff0000 /* free virtual address	*/
 
 #define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
@@ -461,13 +478,81 @@
 #define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- *----------------------------------------------------------------------*/
-#define CFG_DCACHE_SIZE		(32<<10)  /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	      /* ...			            */
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	      /* log base 2 of the above value	*/
-#endif
+ * PPC440 GPIO Configuration
+ */
+/* test-only: take GPIO init from pcs440ep ???? in config file */
+#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+{											\
+/* GPIO Core 0 */									\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1	EBC_ADDR(6)	DMA_ACK(2)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO2	EBC_ADDR(5)	DMA_EOT/TC(2)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO3	EBC_ADDR(4)	DMA_REQ(3)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO4	EBC_ADDR(3)	DMA_ACK(3)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO5	EBC_ADDR(2)	DMA_EOT/TC(3)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO6	EBC_CS_N(1)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7	EBC_CS_N(2)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8	EBC_CS_N(3)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9	EBC_CS_N(4)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5)			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO12				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO13				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO14				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO15				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO16 GMCTxD(4)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO17 GMCTxD(5)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO18 GMCTxD(6)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO19 GMCTxD(7)			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO20 RejectPkt0			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO21 RejectPkt1			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO22				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO23 SCPD0				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO24 GMCTxD(2)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO25 GMCTxD(3)			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ	USB2D_RXERROR	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO28		USB2D_TXVALID	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO29 EBC_EXT_HDLA	USB2D_PAD_SUSPNDM */	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO30 EBC_EXT_ACK	USB2D_XCVRSELECT*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO31 EBC_EXR_BUSREQ	USB2D_TERMSELECT*/	\
+},											\
+{											\
+/* GPIO Core 1 */									\
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0	EBC_DATA(2)	*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1	EBC_DATA(3)	*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N	UART1_DSR_CTS_N	UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0)	UART3_SIN*/ \
+{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N	EBC_DATA(1)	UART3_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N	UART1_SOUT	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N	UART1_SIN	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4)	DMA_ACK(1)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6)	DMA_EOT/TC(1)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7)	DMA_REQ(0)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8)	DMA_ACK(0)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9)	DMA_EOT/TC(0)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63  Unselect via TraceSelect Bit	*/	\
+}											\
+}
 
 /*
  * Internal Definitions
@@ -481,4 +566,9 @@
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
 #endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index c5ae0cd..3baa32c 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -357,13 +357,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index c6e7953..9457bce 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -391,13 +391,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/taihu.h b/include/configs/taihu.h
index d623e56..d012c60 100644
--- a/include/configs/taihu.h
+++ b/include/configs/taihu.h
@@ -80,6 +80,7 @@
 	"bootfile=/tftpboot/taihu/uImage\0"				\
 	"rootpath=/opt/eldk/ppc_4xx\0"					\
 	"netdev=eth0\0"							\
+	"hostname=taihu\0"						\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
@@ -210,10 +211,12 @@
 
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
 /*-----------------------------------------------------------------------
  * I2C stuff
@@ -244,6 +247,7 @@ unsigned char spi_read(void);
 /* standard dtt sensor configuration */
 #define CONFIG_DTT_DS1775	1
 #define CONFIG_DTT_SENSORS	{ 0 }
+#define CFG_I2C_DTT_ADDR	0x49
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -327,7 +331,7 @@ unsigned char spi_read(void);
 /*-----------------------------------------------------------------------
  * PPC405 GPIO Configuration
  */
-#define CFG_440_GPIO_TABLE { /*				GPIO	Alternate1		*/	\
+#define CFG_4xx_GPIO_TABLE { /*				GPIO	Alternate1		*/	\
 {												\
 /* GPIO Core 0 */										\
 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO0	PerBLast    SPI CS	*/	\
@@ -365,13 +369,6 @@ unsigned char spi_read(void);
 }												\
 }
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For IBM 405EP CPU */
-#define CFG_CACHELINE_SIZE	32
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-
 /*
  * Init Memory Controller:
  *
@@ -421,43 +418,6 @@ unsigned char spi_read(void);
 #define CFG_EBC_PB4AP           0x158FF600
 #define CFG_EBC_PB4CR           0x5021A000
 
-/*-----------------------------------------------------------------------
- * Definitions for GPIO setup (PPC405EP specific)
- *
- * GPIO0[0]     - External Bus Controller BLAST output
- * GPIO0[1-9]   - Instruction trace outputs
- * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
- * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
- * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
- * GPIO0[24-27] - UART0 control signal inputs/outputs
- * GPIO0[28-29] - UART1 data signal input/output
- * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
- */
-#define CFG_GPIO0_OSRH	0x15555550	/* output select high/low */
-#define CFG_GPIO0_OSRL	0x00000110
-#define CFG_GPIO0_ISR1H	0x00000001	/* input select high/low */
-#define CFG_GPIO0_ISR1L	0x15545440
-#define CFG_GPIO0_TSRH	0x00000000	/* three-state select high/low */
-#define CFG_GPIO0_TSRL	0x00000000
-#define CFG_GPIO0_TCR	0xFFFE8117	/* three-state control */
-#define CFG_GPIO0_ODR	0x00000000	/* open drain */
-
-#define GPIO0		0		/* GPIO controller 0 */
-
-/* the GPIO macros in include/ppc405.h for High/Low registers are backwards */
-
-#define GPIOx_OSL	(GPIO0_OSRH-GPIO_BASE)
-#define GPIOx_TSL	(GPIO0_TSRH-GPIO_BASE)
-#define GPIOx_IS1L	(GPIO0_ISR1H-GPIO_BASE)
-#define GPIOx_IS2L	(GPIO0_ISR1H-GPIO_BASE)
-#define GPIOx_IS3L	(GPIO0_ISR1H-GPIO_BASE)
-
-#define GPIO_OS(x)	(x+GPIOx_OSL)	/* GPIO output select */
-#define GPIO_TS(x)	(x+GPIOx_TSL)	/* GPIO three-state select */
-#define GPIO_IS1(x)	(x+GPIOx_IS1L)	/* GPIO input select */
-#define GPIO_IS2(x)	(x+GPIOx_IS1L)
-#define GPIO_IS3(x)	(x+GPIOx_IS1L)
-
 #define CPLD_REG0_ADDR	0x50100000
 #define CPLD_REG1_ADDR	0x50100001
 /*
diff --git a/include/configs/taishan.h b/include/configs/taishan.h
index baa4fbd..ab3b0c1 100644
--- a/include/configs/taishan.h
+++ b/include/configs/taishan.h
@@ -319,15 +319,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- *----------------------------------------------------------------------*/
-#define CFG_DCACHE_SIZE		32768	/* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index 180549e..19b29e7 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -290,16 +290,6 @@
 #endif
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 35bce4a..a8eeff9 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -160,6 +160,14 @@
 #define CFG_ENV_OFFSET		0x0
 #endif /* CFG_ENV_IS_IN_EEPROM */
 
+/* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
+#define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
+#define CONFIG_DTT_AD7414	1		/* use AD7414		*/
+#define CONFIG_DTT_SENSORS	{0}		/* Sensor addresses	*/
+#define CFG_DTT_MAX_TEMP	70
+#define CFG_DTT_LOW_TEMP	-30
+#define CFG_DTT_HYSTERESIS	3
+
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
 	"echo"
@@ -273,6 +281,7 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
@@ -361,15 +370,6 @@
 
 #define CFG_BCSR5_PCI66EN	0x80
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		(32<<10) /* For AMCC 440 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 74033b4..db1d35b 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -64,7 +64,7 @@
 #define CFG_PCI_TARGBASE	CFG_PCI_MEMBASE
 
 #define CFG_PCIE_MEMBASE	0xb0000000	/* mapped PCIe memory	*/
-#define CFG_PCIE_MEMSIZE	0x01000000
+#define CFG_PCIE_MEMSIZE	0x08000000	/* smallest incr for PCIe port */
 #define CFG_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
 
 #define CFG_PCIE0_CFGBASE	0xc0000000
@@ -74,6 +74,9 @@
 #define CFG_PCIE1_XCFGBASE	0xc3001000
 #define CFG_PCIE2_XCFGBASE	0xc3002000
 
+/* base address of inbound PCIe window */
+#define CFG_PCIE_INBOUND_BASE	0x0000000400000000ULL
+
 /* System RAM mapped to PCI space */
 #define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
 #define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
@@ -183,6 +186,7 @@
 		"setenv filesize;saveenv\0"				\
 	"upd=run load;run update\0"					\
 	"pciconfighost=1\0"						\
+	"pcie_mode=RP:EP:EP\0"						\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -320,14 +324,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/*Initial Memory map for Linux*/
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs		*/
-#define CFG_CACHELINE_SIZE	32	/* ...				*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
 
 /*
  * Internal Definitions
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index 605755a..810a528 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -237,13 +237,6 @@
 #endif
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For IBM 405EP CPU			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-
-/*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory (OCM) for temperary stack until sdram is tested */