Merge branch 'master' of git://www.denx.de/git/u-boot-imx

9 files changed, 335 insertions, 6 deletions

diff --git a/include/configs/aristainetos.h b/include/configs/aristainetos.h
index 20aea85..e6a08df 100644
--- a/include/configs/aristainetos.h
+++ b/include/configs/aristainetos.h
@@ -77,7 +77,7 @@
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS		3
-#define CONFIG_SF_DEFAULT_CS		(0|(IMX_GPIO_NR(3, 20)<<8))
+#define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED		20000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index 308e520..5a5f940 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -27,7 +27,7 @@
 #define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
 #define CONFIG_SPL_TEXT_BASE		0x00908000
-#define CONFIG_SPL_MAX_SIZE		(64 * 1024)
+#define CONFIG_SPL_MAX_SIZE		0x10000
 #define CONFIG_SPL_START_S_PATH		"arch/arm/cpu/armv7"
 #define CONFIG_SPL_STACK		0x0091FFB8
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index efe770b..5c20991 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -171,6 +171,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"consdev=ttyAMA0\0"						\
 	"baudrate=115200\0"						\
+	"bootscript=boot.scr\0"						\
 	"bootdev=/dev/mmcblk0p2\0"					\
 	"rootdev=/dev/mmcblk0p3\0"					\
 	"netdev=eth0\0"							\
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index 135a3f5..e0528ce 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -29,5 +29,6 @@
 #endif
 
 #define CONFIG_MP
+#define CONFIG_MXC_GPT_HCLK
 
 #endif
diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
index 0ab3127..235dd6d 100644
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6qsabreauto.h
@@ -32,6 +32,9 @@
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0
 
+#define CONFIG_PCA953X
+#define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x30, 8}, {0x32, 8}, {0x34, 8} }
+
 #include "mx6sabre_common.h"
 
 #define CONFIG_SYS_FSL_USDHC_NUM	2
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index fddedf1..4fcaf51 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -190,7 +190,6 @@
 #define CONFIG_ENV_OFFSET		(6 * SZ_64K)
 #define CONFIG_ENV_SIZE			SZ_8K
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
@@ -210,4 +209,9 @@
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #endif
 
+#define CONFIG_SYS_FSL_USDHC_NUM	3
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV		1	/* SDHC2*/
+#endif
+
 #endif				/* __CONFIG_H */
diff --git a/include/configs/novena.h b/include/configs/novena.h
new file mode 100644
index 0000000..879141a
--- /dev/null
+++ b/include/configs/novena.h
@@ -0,0 +1,298 @@
+/*
+ * Configuration settings for the Novena U-boot.
+ *
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* System configurations */
+#define CONFIG_MX6
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MISC_INIT_R
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
+#define CONFIG_FAT_WRITE
+#define CONFIG_FIT
+#define CONFIG_KEYBOARD
+#define CONFIG_MXC_GPIO
+#define CONFIG_OF_LIBFDT
+#define CONFIG_REGEX
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_SYS_NO_FLASH
+
+#include "configs/mx6_common.h"
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+#include <config_cmd_default.h>
+
+/* U-Boot Commands */
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BMODE
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_FUSE
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SATA
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_TIME
+#define CONFIG_CMD_USB
+#define CONFIG_VIDEO
+
+/* U-Boot general configurations */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
+#define CONFIG_SYS_PBSIZE	\
+	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+						/* Print buffer size */
+#define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+						/* Boot argument buffer size */
+#define CONFIG_VERSION_VARIABLE			/* U-BOOT version */
+#define CONFIG_AUTO_COMPLETE			/* Command auto complete */
+#define CONFIG_CMDLINE_EDITING			/* Command history etc */
+#define CONFIG_SYS_HUSH_PARSER
+
+/* U-Boot environment */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_SIZE			(16 * 1024)
+/*
+ * Environment is on MMC, starting at offset 512KiB from start of the card.
+ * Please place first partition at offset 1MiB from the start of the card
+ * as recommended by GNU/fdisk. See below for details:
+ * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_OFFSET		(512 * 1024)
+#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
+#define CONFIG_ENV_OFFSET_REDUND	\
+		(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+/* Booting Linux */
+#define CONFIG_BOOTDELAY		5
+#define CONFIG_BOOTFILE			"fitImage"
+#define CONFIG_BOOTARGS			"console=ttymxc1,115200 "
+#define CONFIG_BOOTCOMMAND		"run net_nfs"
+#define CONFIG_LOADADDR			0x18000000
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_HOSTNAME			novena
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+#define PHYS_SDRAM_SIZE			0xF0000000
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_SYS_MEMTEST_START	0x10000000
+#define CONFIG_SYS_MEMTEST_END		0x20000000
+
+#define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)
+
+/* SPL */
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#include "imx6_spl.h"			/* common IMX6 SPL configuration */
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Ethernet Configuration */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE			ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE		RGMII
+#define CONFIG_ETHPRIME			"FEC"
+#define CONFIG_FEC_MXC_PHYADDR		0x7
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9021
+#define CONFIG_ARP_TIMEOUT		200UL
+#endif
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED		100000
+
+/* I2C EEPROM */
+#ifdef CONFIG_CMD_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
+#define CONFIG_SYS_SPD_BUS_NUM		2
+#endif
+
+/* MMC Configs */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+#endif
+
+/* OCOTP Configs */
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
+/* PCI express */
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCIE_IMX
+#define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(3, 29)
+#define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(7, 12)
+#endif
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
+
+/* SATA Configs */
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE	1
+#define CONFIG_DWC_AHSATA_PORT_ID	0
+#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+#endif
+
+/* UART */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE		UART2_BASE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_CONS_INDEX		1
+
+/* USB Configs */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS		0
+/* Gadget part */
+#define CONFIG_CI_UDC
+#define CONFIG_USBD_HS
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_CDC
+#define CONFIG_NETCONSOLE
+#endif
+
+/* Video output */
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_IPUV3_CLK		260000000
+#define CONFIG_CMD_HDMIDETECT
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+#endif
+
+/* Extra U-Boot environment. */
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"fdt_high=0xffffffff\0"						\
+	"initrd_high=0xffffffff\0"					\
+	"consdev=ttymxc1\0"						\
+	"baudrate=115200\0"						\
+	"bootdev=/dev/mmcblk0p1\0"					\
+	"rootdev=/dev/mmcblk0p2\0"					\
+	"netdev=eth0\0"							\
+	"kernel_addr_r=0x18000000\0"					\
+	"addcons="							\
+		"setenv bootargs ${bootargs} "				\
+		"console=${consdev},${baudrate}\0"			\
+	"addip="							\
+		"setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
+			"${netmask}:${hostname}:${netdev}:off\0"	\
+	"addmisc="							\
+		"setenv bootargs ${bootargs} ${miscargs}\0"		\
+	"addargs=run addcons addmisc\0"					\
+	"mmcload="							\
+		"mmc rescan ; "						\
+		"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"	\
+	"netload="							\
+		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
+	"miscargs=nohlt panic=1\0"					\
+	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
+	"nfsargs="							\
+		"setenv bootargs root=/dev/nfs rw "			\
+			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
+	"mmc_mmc="							\
+		"run mmcload mmcargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"mmc_nfs="							\
+		"run mmcload nfsargs addip addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_mmc="							\
+		"run netload mmcargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_nfs="							\
+		"run netload nfsargs addip addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"update_sd_spl_filename=SPL\0"					\
+	"update_sd_uboot_filename=u-boot.img\0"				\
+	"update_sd_firmware="	/* Update the SD firmware partition */	\
+		"if mmc rescan ; then "					\
+		"if dhcp ${update_sd_spl_filename} ; then "		\
+		"mmc write ${loadaddr} 2 0x200 ; "			\
+		"fi ; "							\
+		"if dhcp ${update_sd_uboot_filename} ; then "		\
+		"fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
+		"fi ; "							\
+		"fi\0"							\
+
+#endif				/* __CONFIG_H */
diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index d97a961..c94eee1 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -9,13 +9,26 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_MX6
+
+/* SPL */
+/* #if defined(CONFIG_SPL_BUILD) */
+
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_EXT_SUPPORT
+
+/* common IMX6 SPL configuration */
+#include "imx6_spl.h"
+
+/* #endif */
+
 #include "mx6_common.h"
 #include <asm/arch/imx-regs.h>
 #include <asm/imx-common/gpio.h>
 #include <linux/sizes.h>
 
-#define CONFIG_MX6
-
 #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
 #define PHYS_SDRAM_SIZE			(512u * SZ_1M)
 #elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
@@ -57,7 +70,7 @@
 
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_BUS	0
-#define CONFIG_SF_DEFAULT_CS	(0 | (IMX_GPIO_NR(3, 19) << 8))
+#define CONFIG_SF_DEFAULT_CS	0
 #define CONFIG_SF_DEFAULT_SPEED	50000000
 #define CONFIG_SF_DEFAULT_MODE	(SPI_MODE_0)
 
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 9fb501a..809017c 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -78,6 +78,15 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS		0
+
 /* Ethernet Configuration */
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP