diff options
| author | Stefano Babic <sbabic@denx.de> | 2015-11-12 17:13:26 +0100 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2015-11-12 17:13:26 +0100 |
| commit | 5f5620ab2679608f94b3a77e51c77d0a770103bd (patch) | |
| tree | ec983c06d2f62384909968bb870add121b8a1502 /include/configs | |
| parent | 78e9ca52edaab74ad645d719676ff4c24d2f462c (diff) | |
| parent | 038be18fd95aa6283eafb85ceabc0b880976424b (diff) | |
| download | u-boot-imx-5f5620ab2679608f94b3a77e51c77d0a770103bd.zip u-boot-imx-5f5620ab2679608f94b3a77e51c77d0a770103bd.tar.gz u-boot-imx-5f5620ab2679608f94b3a77e51c77d0a770103bd.tar.bz2 | |
Merge git://git.denx.de/u-boot
Diffstat (limited to 'include/configs')
64 files changed, 1488 insertions, 113 deletions
diff --git a/include/configs/10m50_devboard.h b/include/configs/10m50_devboard.h new file mode 100644 index 0000000..ab7dd08 --- /dev/null +++ b/include/configs/10m50_devboard.h @@ -0,0 +1,103 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt@psyent.com> + * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * BOARD/CPU + */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO_LATE + +/* + * SERIAL + */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console info */ + +/* + * Flash + */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 1024 +#define CONFIG_MTD_DEVICE + +/* + * NET options + */ +#define CONFIG_SYS_RX_ETH_BUFFER 0 +#define CONFIG_CMD_MII +#define CONFIG_PHY_GIGE +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +#define CONFIG_PHY_MARVELL + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * FDT options + */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_LMB + +/* + * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above + * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the + * reset address, no? This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + */ +#define CONFIG_ENV_IS_IN_FLASH + +#define CONFIG_ENV_SIZE 0x10000 /* 64k, 1 sector */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CONFIG_ENV_ADDR 0xf4040000 + +/* + * MEMORY ORGANIZATION + * -Monitor at top of sdram. + * -The heap is placed below the monitor + * -The stack is placed below the heap (&grows down). + */ +#define CONFIG_SYS_SDRAM_BASE 0xc8000000 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_MONITOR_IS_IN_RAM +#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256k */ +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_SDRAM_SIZE - \ + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_SYS_MALLOC_LEN 0x20000 + +/* + * MISC + */ +#define CONFIG_SYS_LONGHELP /* Provide extended help */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */ +#define CONFIG_SYS_MAXARGS 16 /* Max command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + \ + 16) /* Print buf size */ +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \ + CONFIG_ENV_SIZE - \ + CONFIG_SYS_MALLOC_LEN - \ + 0x10000) +#define CONFIG_CMDLINE_EDITING +#define CONFIG_CMD_GPIO + +#endif /* __CONFIG_H */ diff --git a/include/configs/nios2-generic.h b/include/configs/3c120_devboard.h index b38513e..856c836 100644 --- a/include/configs/nios2-generic.h +++ b/include/configs/3c120_devboard.h @@ -24,22 +24,22 @@ /* * CFI Flash */ -#define CONFIG_SYS_FLASH_BASE 0xe0000000 #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */ #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* - * MII/PHY + * NET options */ -#define CONFIG_CMD_MII 1 -#define CONFIG_PHY_GIGE 1 -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 -#define CONFIG_PHY_MARVELL 1 +#define CONFIG_SYS_RX_ETH_BUFFER 0 +#define CONFIG_CMD_MII +#define CONFIG_PHY_GIGE +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +#define CONFIG_PHY_MARVELL /* * BOOTP options @@ -77,15 +77,13 @@ */ #define CONFIG_SYS_SDRAM_BASE 0xD0000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 +#define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_MONITOR_IS_IN_RAM #define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256k */ #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \ CONFIG_SYS_SDRAM_SIZE - \ CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x20000) -#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - \ - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_INIT_SP CONFIG_SYS_MALLOC_BASE +#define CONFIG_SYS_MALLOC_LEN 0x20000 /* * MISC @@ -99,7 +97,10 @@ 16) /* Print buf size */ #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - 0x20000) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \ + CONFIG_ENV_SIZE - \ + CONFIG_SYS_MALLOC_LEN - \ + 0x10000) #define CONFIG_CMDLINE_EDITING #define CONFIG_CMD_GPIO diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index a006dce..54dcf3b 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -17,7 +17,6 @@ #define CONFIG_BSC9132 #endif -#define CONFIG_FSL_CLK #define CONFIG_MISC_INIT_R #ifdef CONFIG_SDCARD diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index cfa5931..551b72d 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -10,7 +10,6 @@ #define __CONFIG_H #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK /* * High Level Configuration Options diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 990fc04..7d1262d 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -9,7 +9,6 @@ #define __CONFIG_H #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK /* * High Level Configuration Options diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index fcc531b..ab68e63 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -16,7 +16,6 @@ #define CONFIG_MPC837x 1 /* MPC837x CPU specific */ #define CONFIG_MPC837XERDB 1 #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK #define CONFIG_SYS_TEXT_BASE 0xFE000000 diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index af8eb8c..29c27fa 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -12,7 +12,6 @@ #define __CONFIG_H #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK #include "../board/freescale/common/ics307_clk.h" #ifdef CONFIG_36BIT diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 9f784e0..6f614b0 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -12,7 +12,6 @@ #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 9e40730..81b0855 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -15,7 +15,6 @@ #define CONFIG_PHYS_64BIT #endif #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK #define CONFIG_P1010 #define CONFIG_E500 /* BOOKE e500 family */ diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index c571fac..a9d825b 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -12,7 +12,6 @@ #include "../board/freescale/common/ics307_clk.h" #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK #ifdef CONFIG_36BIT #define CONFIG_PHYS_64BIT diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 0cd9904..2c4c8b5 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -15,7 +15,6 @@ #define CONFIG_PHYS_64BIT #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_PPC_P2041 -#define CONFIG_FSL_CLK #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index 4f22657..52942ed 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -20,7 +20,6 @@ #define CONFIG_MP /* support multiple processors */ #define CONFIG_PHYS_64BIT #define CONFIG_ENABLE_36BIT_PHYS -#define CONFIG_FSL_CLK #ifdef CONFIG_PHYS_64BIT #define CONFIG_ADDR_MAP 1 diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index d412d0b..39fa5e2 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -20,7 +20,6 @@ #define CONFIG_MP /* support multiple processors */ #define CONFIG_PHYS_64BIT #define CONFIG_ENABLE_36BIT_PHYS -#define CONFIG_FSL_CLK #ifdef CONFIG_PHYS_64BIT #define CONFIG_ADDR_MAP 1 diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 18df237..fc263df 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -29,7 +29,6 @@ #define CONFIG_T1040QDS #define CONFIG_PHYS_64BIT #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE @@ -593,12 +592,14 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC +#define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION +#define CONFIG_FSL_ESDHC_ADAPTER_IDENT #endif /* Qman/Bman */ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 2091015..840be04 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -13,7 +13,6 @@ #define CONFIG_T104xRDB #define CONFIG_PHYS_64BIT #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK #define CONFIG_E500 /* BOOKE e500 family */ #include <asm/config_mpc85xx.h> @@ -742,7 +741,9 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg #ifdef CONFIG_FMAN_ENET #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 -#elif defined(CONFIG_T1040D4RDB) || defined(CONFIG_T1042D4RDB) +#elif defined(CONFIG_T1040D4RDB) +#define CONFIG_SYS_SGMII1_PHY_ADDR 0x01 +#elif defined(CONFIG_T1042D4RDB) #define CONFIG_SYS_SGMII1_PHY_ADDR 0x02 #define CONFIG_SYS_SGMII2_PHY_ADDR 0x03 #define CONFIG_SYS_SGMII3_PHY_ADDR 0x01 diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index d35b9d2..a81f1e6 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -13,7 +13,6 @@ #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ -#define CONFIG_FSL_CLK #define CONFIG_MMC #define CONFIG_USB_EHCI #if defined(CONFIG_PPC_T2080) diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index c632b8e..8b76234 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -14,7 +14,6 @@ #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_T2080RDB #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ -#define CONFIG_FSL_CLK #define CONFIG_MMC #define CONFIG_USB_EHCI #define CONFIG_FSL_SATA_V2 diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index dd8dd73..4edb3cb 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -12,7 +12,6 @@ #define CONFIG_T4240QDS #define CONFIG_PHYS_64BIT -#define CONFIG_FSL_CLK #define CONFIG_FSL_SATA_V2 #define CONFIG_PCIE4 diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 2c5f800..2e875d2 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -13,7 +13,6 @@ #define CONFIG_T4240RDB #define CONFIG_PHYS_64BIT #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK #define CONFIG_FSL_SATA_V2 #define CONFIG_PCIE4 diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h index 0b609af..8611473 100644 --- a/include/configs/UCP1020.h +++ b/include/configs/UCP1020.h @@ -15,7 +15,6 @@ #define __CONFIG_H #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK #define CONFIG_FSL_ELBC #define CONFIG_PCI diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index f938534..9db4a4f 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -97,8 +97,8 @@ #elif CONFIG_SYS_USE_SERIALFLASH /* u-boot env in serial flash, by default is bus 0 and cs 0 */ #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_OFFSET 0x4000 -#define CONFIG_ENV_SIZE 0x4000 +#define CONFIG_ENV_OFFSET 0x6000 +#define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x1000 #define CONFIG_BOOTCOMMAND "sf probe 0; " \ "sf read 0x21000000 0x60000 0xc000; " \ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 9fa8f81..7658e61 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -18,7 +18,7 @@ #define CONFIG_SYS_THUMB_BUILD #define CONFIG_USE_ARCH_MEMCPY #define CONFIG_USE_ARCH_MEMSET -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK #define CONFIG_ARCH_MISC_INIT #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 77c2edc..600bb83 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -44,7 +44,6 @@ #define CONFIG_P1022 #define CONFIG_CONTROLCENTERD #define CONFIG_MP /* support multiple processors */ -#define CONFIG_FSL_CLK #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 3c9a529..9210216 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -11,7 +11,6 @@ #define __CONFIG_H #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK #include "../board/freescale/common/ics307_clk.h" diff --git a/include/configs/cyrus.h b/include/configs/cyrus.h new file mode 100644 index 0000000..5d25fb1 --- /dev/null +++ b/include/configs/cyrus.h @@ -0,0 +1,587 @@ +/* + * Based on corenet_ds.h + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_CYRUS + +#define CONFIG_PHYS_64BIT + +#if !defined(CONFIG_PPC_P5020) && !defined(CONFIG_PPC_P5040) +#error Must call Cyrus CONFIG with a specific CPU enabled. +#endif + + +#define CONFIG_MMC +#define CONFIG_SDCARD +#define CONFIG_FSL_SATA_V2 +#define CONFIG_PCIE3 +#define CONFIG_PCIE4 +#ifdef CONFIG_PPC_P5020 +#define CONFIG_SYS_FSL_RAID_ENGINE +#define CONFIG_SYS_DPAA_RMAN +#endif +#define CONFIG_SYS_DPAA_PME + +/* + * Corenet DS style board configuration file + */ +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg +#if defined(CONFIG_PPC_P5020) +#define CONFIG_SYS_CLK_FREQ 133000000 +#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg +#elif defined(CONFIG_PPC_P5040) +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg +#endif + + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_E500MC /* BOOKE e500mc family */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_MP /* support multiple processors */ + + +#define CONFIG_SYS_MMC_MAX_DEVICE 1 + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff40000 +#endif + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS +#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 /* PCIE controler 2 */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_SYS_NO_FLASH + +#if defined(CONFIG_SDCARD) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_FSL_FIXED_MMC_LOCATION +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (512 * 1658) +#endif + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BACKSIDE_L2_CACHE +#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_DDR_ECC +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#define CONFIG_ENABLE_36BIT_PHYS + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ +#endif + +/* test POST memory test */ +#undef CONFIG_POST +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00400000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +/* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) +#else +#define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR +#endif +#define CONFIG_SYS_L3_SIZE (1024 << 10) +#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull +#endif + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) + +#define CONFIG_DDR_SPD +#define CONFIG_SYS_FSL_DDR3 + +#define CONFIG_SYS_SPD_BUS_NUM 1 +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * Local Bus Definitions + */ + +#define CONFIG_SYS_LBC0_BASE 0xe0000000 /* Start of LBC Registers */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_LBC0_BASE_PHYS 0xfe0000000ull +#else +#define CONFIG_SYS_LBC0_BASE_PHYS CONFIG_SYS_LBC0_BASE +#endif + +#define CONFIG_SYS_LBC1_BASE 0xe1000000 /* Start of LBC Registers */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_LBC1_BASE_PHYS 0xfe1000000ull +#else +#define CONFIG_SYS_LBC1_BASE_PHYS CONFIG_SYS_LBC1_BASE +#endif + +/* Set the local bus clock 1/16 of platform clock */ +#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_16 | LCRR_EADC_1) + +#define CONFIG_SYS_BR0_PRELIM \ +(BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V) +#define CONFIG_SYS_BR1_PRELIM \ +(BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V) + +#define CONFIG_SYS_OR0_PRELIM 0xfff00010 +#define CONFIG_SYS_OR1_PRELIM 0xfff00010 + + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ + +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#else +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS +#endif +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ + +/* Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_SYS_BAUDRATE_TABLE \ +{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 +#define CONFIG_SYS_FSL_I2C3_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 +#define CONFIG_SYS_FSL_I2C4_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 + +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 + +#define CONFIG_SYS_I2C_GENERIC_MAC +#define CONFIG_SYS_I2C_MAC1_BUS 3 +#define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57 +#define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2 +#define CONFIG_SYS_I2C_MAC2_BUS 0 +#define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50 +#define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa + +#define CONFIG_CMD_DATE 1 +#define CONFIG_RTC_MCP79411 1 +#define CONFIG_SYS_RTC_BUS_NUM 3 +#define CONFIG_SYS_I2C_RTC_ADDR 0x6f + +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#else +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 +#endif +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#else +#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 +#endif +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* controller 2, Slot 2, tgtid 2, Base address 201000 */ +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#endif +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull +#else +#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 +#endif +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull +#else +#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 +#endif +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull +#else +#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 +#endif +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +/* controller 4, Base address 203000 */ +#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull +#define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull +#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ + +/* Qman/Bman */ +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 10 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#else +#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE +#endif +#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 +#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 +#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 +#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE +#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) +#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ + CONFIG_SYS_BMAN_CENA_SIZE) +#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) +#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 +#define CONFIG_SYS_QMAN_NUM_PORTALS 10 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull +#else +#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE +#endif +#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 +#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 +#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 +#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE +#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) +#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ + CONFIG_SYS_QMAN_CENA_SIZE) +#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) +#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + +#define CONFIG_SYS_DPAA_FMAN +/* Default address of microcode for the Linux Fman driver */ +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) + +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 +#endif + +#ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_NET_MULTI + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_PCI */ + +/* SATA */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_SYS_TBIPA_VALUE 8 +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC4" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * Environment + */ +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#endif + +/* + * USB + */ +#define CONFIG_HAS_FSL_DR_USB +#define CONFIG_HAS_FSL_MPH_USB + +#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL + /* _VIA_CONTROL_EP */ +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#endif + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ + +#define CONFIG_BAUDRATE 115200 + +#define __USB_PHY_TYPE utmi + +#define CONFIG_EXTRA_ENV_SETTINGS \ +"hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ +"bank_intlv=cs0_cs1;" \ +"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ +"usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ +"netdev=eth0\0" \ +"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ +"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ +"consoledev=ttyS0\0" \ +"ramdiskaddr=2000000\0" \ +"fdtaddr=c00000\0" \ +"bdev=sda3\0" + +#define CONFIG_HDBOOT \ +"setenv bootargs root=/dev/$bdev rw " \ +"console=$consoledev,$baudrate $othbootargs;" \ +"tftp $loadaddr $bootfile;" \ +"tftp $fdtaddr $fdtfile;" \ +"bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ +"setenv bootargs root=/dev/nfs rw " \ +"nfsroot=$serverip:$rootpath " \ +"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ +"console=$consoledev,$baudrate $othbootargs;" \ +"tftp $loadaddr $bootfile;" \ +"tftp $fdtaddr $fdtfile;" \ +"bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ +"setenv bootargs root=/dev/ram rw " \ +"console=$consoledev,$baudrate $othbootargs;" \ +"tftp $ramdiskaddr $ramdiskfile;" \ +"tftp $loadaddr $bootfile;" \ +"tftp $fdtaddr $fdtfile;" \ +"bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT + +#include <asm/fsl_secure_boot.h> + +#ifdef CONFIG_SECURE_BOOT +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 6e32de8..cb9544b 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -82,11 +82,24 @@ "fdt ram 0x80f80000 0x80000;" \ "ramdisk ram 0x81000000 0x4000000\0" +#define DFU_ALT_INFO_QSPI \ + "dfu_alt_info_qspi=" \ + "MLO raw 0x0 0x010000;" \ + "MLO.backup1 raw 0x010000 0x010000;" \ + "MLO.backup2 raw 0x020000 0x010000;" \ + "MLO.backup3 raw 0x030000 0x010000;" \ + "u-boot.img raw 0x040000 0x0100000;" \ + "u-boot-spl-os raw 0x140000 0x080000;" \ + "u-boot-env raw 0x1C0000 0x010000;" \ + "u-boot-env.backup raw 0x1D0000 0x010000;" \ + "kernel raw 0x1E0000 0x800000\0" + #define DFUARGS \ "dfu_bufsiz=0x10000\0" \ DFU_ALT_INFO_MMC \ DFU_ALT_INFO_EMMC \ - DFU_ALT_INFO_RAM + DFU_ALT_INFO_RAM \ + DFU_ALT_INFO_QSPI /* Fastboot */ #define CONFIG_USB_FUNCTION_FASTBOOT @@ -207,6 +220,7 @@ #define CONFIG_DFU_MMC #define CONFIG_DFU_RAM +#define CONFIG_DFU_SF /* SATA */ #define CONFIG_BOARD_LATE_INIT diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index e2b9deb..3cb279a 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -23,7 +23,6 @@ #define CONFIG_IDENT_STRING " hrcon 0.01" -#define CONFIG_FSL_CLK #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_LAST_STAGE_INIT diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index b8477e8..562e78f 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -11,7 +11,7 @@ #define CONFIG_ARMV7_PSCI -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -69,7 +69,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x600 #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1a000 @@ -82,7 +82,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_MONITOR_LEN 0x80000 +#define CONFIG_SYS_MONITOR_LEN 0xc0000 #endif #ifdef CONFIG_QSPI_BOOT @@ -563,7 +563,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ARMV7_NONSEC #define CONFIG_ARMV7_VIRT #define CONFIG_PEN_ADDR_BIG_ENDIAN -#define CONFIG_LS102XA_NS_ACCESS +#define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_SMP_PEN_ADDR 0x01ee0200 #define CONFIG_TIMER_CLK_FREQ 12500000 @@ -574,7 +574,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTDELAY 3 -#define CONFIG_SYS_QE_FW_ADDR 0x67f40000 +#define CONFIG_SYS_QE_FW_ADDR 0x600c0000 #ifdef CONFIG_LPUART #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -658,6 +658,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS #define CONFIG_CMD_BOOTZ #define CONFIG_MISC_INIT_R diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 784331f..fdbbfc1 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -11,7 +11,7 @@ #define CONFIG_ARMV7_PSCI -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -109,7 +109,13 @@ #endif #ifdef CONFIG_SD_BOOT -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg +#ifdef CONFIG_SD_BOOT_QSPI +#define CONFIG_SYS_FSL_PBL_RCW \ + board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg +#else +#define CONFIG_SYS_FSL_PBL_RCW \ + board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg +#endif #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT @@ -139,6 +145,9 @@ #ifdef CONFIG_QSPI_BOOT #define CONFIG_SYS_TEXT_BASE 0x40010000 +#endif + +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_SYS_NO_FLASH #endif @@ -165,7 +174,7 @@ /* * IFC Definitions */ -#ifndef CONFIG_QSPI_BOOT +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -280,7 +289,6 @@ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ /* EEPROM */ -#ifndef CONFIG_SD_BOOT #define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 1 @@ -288,7 +296,6 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#endif /* * MMC @@ -302,7 +309,7 @@ #define CONFIG_DOS_PARTITION /* SPI */ -#ifdef CONFIG_QSPI_BOOT +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) /* QSPI */ #define CONFIG_FSL_QSPI #define QSPI0_AMBA_BASE 0x40000000 @@ -412,10 +419,14 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_CMDLINE_EDITING +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#undef CONFIG_CMD_IMLS +#endif + #define CONFIG_ARMV7_NONSEC #define CONFIG_ARMV7_VIRT #define CONFIG_PEN_ADDR_BIG_ENDIAN -#define CONFIG_LS102XA_NS_ACCESS +#define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_SMP_PEN_ADDR 0x01ee0200 #define CONFIG_TIMER_CLK_FREQ 12500000 @@ -429,13 +440,13 @@ #ifdef CONFIG_LPUART #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \ - "initrd_high=0xcfffffff\0" \ - "fdt_high=0xcfffffff\0" + "initrd_high=0xffffffff\0" \ + "fdt_high=0xffffffff\0" #else #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ - "initrd_high=0xcfffffff\0" \ - "fdt_high=0xcfffffff\0" + "initrd_high=0xffffffff\0" \ + "fdt_high=0xffffffff\0" #endif /* @@ -478,7 +489,7 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif -#define CONFIG_SYS_QE_FW_ADDR 0x67f40000 +#define CONFIG_SYS_QE_FW_ADDR 0x600c0000 /* * Environment @@ -504,6 +515,7 @@ #define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS #define CONFIG_CMD_BOOTZ #define CONFIG_MISC_INIT_R diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h new file mode 100644 index 0000000..1f22dd3 --- /dev/null +++ b/include/configs/ls1043a_common.h @@ -0,0 +1,255 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1043A_COMMON_H +#define __LS1043A_COMMON_H + +#define CONFIG_REMAKE_ELF +#define CONFIG_FSL_LAYERSCAPE +#define CONFIG_FSL_LSCH2 +#define CONFIG_LS1043A +#define CONFIG_MP +#define CONFIG_SYS_FSL_CLK +#define CONFIG_GICV2 + +#include <asm/arch/config.h> +#ifdef CONFIG_SYS_FSL_SRDS_1 +#define CONFIG_SYS_HAS_SERDES +#endif + +/* Link Definitions */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) + +#define CONFIG_SUPPORT_RAW_INITRD + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F 1 + +/* Flat Device Tree Definitions */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +#ifndef CONFIG_SYS_FSL_DDR4 +#define CONFIG_SYS_FSL_DDR3 /* Use DDR3 memory */ +#endif + +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CPU_RELEASE_ADDR secondary_boot_func + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 25000000 /* 25MHz */ + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* SD boot SPL */ +#ifdef CONFIG_SD_BOOT +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_WATCHDOG_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xf0 +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500 + +#define CONFIG_SPL_TEXT_BASE 0x10000000 +#define CONFIG_SPL_MAX_SIZE 0x1d000 +#define CONFIG_SPL_STACK 0x1001e000 +#define CONFIG_SPL_PAD_TO 0x1d000 + +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 +#define CONFIG_SPL_BSS_START_ADDR 0x80100000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_MONITOR_LEN 0xa0000 +#endif + +/* NAND SPL */ +#ifdef CONFIG_NAND_BOOT +#define CONFIG_SPL_PBL_PAD +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_WATCHDOG_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT +#define CONFIG_SPL_TEXT_BASE 0x10000000 +#define CONFIG_SPL_MAX_SIZE 0x1a000 +#define CONFIG_SPL_STACK 0x1001d000 +#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 +#define CONFIG_SPL_BSS_START_ADDR 0x80100000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_MONITOR_LEN 0xa0000 +#endif + +/* IFC */ +#define CONFIG_FSL_IFC +/* + * CONFIG_SYS_FLASH_BASE has the final address (core view) + * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) + * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address + * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting + */ +#define CONFIG_SYS_FLASH_BASE 0x60000000 +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 + +#ifndef CONFIG_SYS_NO_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ +#endif + +/* I2C */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 +#define CONFIG_SYS_I2C_MXC_I2C2 +#define CONFIG_SYS_I2C_MXC_I2C3 +#define CONFIG_SYS_I2C_MXC_I2C4 + +/* PCIe */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controller 1 */ +#define CONFIG_PCIE2 /* PCIE controller 2 */ +#define CONFIG_PCIE3 /* PCIE controller 3 */ +#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ +#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie" + +#define CONFIG_SYS_PCI_64BIT + +#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 +#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ +#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 +#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ + +#define CONFIG_SYS_PCIE_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 +#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ + +#define CONFIG_SYS_PCIE_MEM_BUS 0x40000000 +#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x40000000 +#define CONFIG_SYS_PCIE_MEM_SIZE 0x40000000 /* 1G */ + +#ifdef CONFIG_PCI +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP +#define CONFIG_E1000 +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_CMD_PCI +#endif + +/* Command line configuration */ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_PING + +/* MMC */ +#define CONFIG_MMC +#ifdef CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#define CONFIG_GENERIC_MMC +#define CONFIG_DOS_PARTITION +#endif + +/* FMan ucode */ +#define CONFIG_SYS_DPAA_FMAN +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 + +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +/* FMan fireware Pre-load address */ +#define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) +#define CONFIG_ARCH_EARLY_INIT_R +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_HWCONFIG +#define HWCONFIG_BUFFER_SIZE 128 + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "loadaddr=0x80100000\0" \ + "kernel_addr=0x100000\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_start=0x61200000\0" \ + "kernel_load=0x807f0000\0" \ + "kernel_size=0x1000000\0" \ + "console=ttyAMA0,38400n8\0" + +#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ + "earlycon=uart8250,0x21c0500,115200" +#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ + "$kernel_size && bootm $kernel_load" +#define CONFIG_BOOTDELAY 10 + +/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_MAXARGS 64 /* max command args */ + +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#endif /* __LS1043A_COMMON_H */ diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h new file mode 100644 index 0000000..307d947 --- /dev/null +++ b/include/configs/ls1043ardb.h @@ -0,0 +1,271 @@ +/* + * Copyright 2015 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1043ARDB_H__ +#define __LS1043ARDB_H__ + +#include "ls1043a_common.h" + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT) +#define CONFIG_SYS_TEXT_BASE 0x82000000 +#else +#define CONFIG_SYS_TEXT_BASE 0x60100000 +#endif + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 100000000 + +#define CONFIG_LAYERSCAPE_NS_ACCESS +#define CONFIG_MISC_INIT_R + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +/* Physical Memory Map */ +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_SPD_BUS_NUM 0 + +#define CONFIG_FSL_DDR_BIST +#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ +#define CONFIG_SYS_DDR_RAW_TIMING +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef + +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043ardb/ls1043ardb_pbi.cfg +#endif + +#ifdef CONFIG_NAND_BOOT +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg +#endif + +#ifdef CONFIG_SD_BOOT +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg +#endif + +/* + * NOR Flash Definitions + */ +#define CONFIG_SYS_NOR_CSPR_EXT (0x0) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +#define CONFIG_SYS_NOR_CSPR \ + (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) + +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ + CSOR_NOR_TRHZ_80) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \ + FTIM0_NOR_TEADC(0x1) | \ + FTIM0_NOR_TAVDS(0x0) | \ + FTIM0_NOR_TEAHC(0xc)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1c) | \ + FTIM1_NOR_TRAD_NOR(0xb) | \ + FTIM1_NOR_TSEQRAD_NOR(0x9)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x1) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWPH(0x8) | \ + FTIM2_NOR_TWP(0x10)) +#define CONFIG_SYS_NOR_FTIM3 0 +#define CONFIG_SYS_IFC_CCR 0x01000000 + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } + +#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS +#define CONFIG_SYS_WRITE_SWAPPED_DATA + +/* + * NAND Flash Definitions + */ +#define CONFIG_NAND_FSL_IFC + +#define CONFIG_SYS_NAND_BASE 0x7e800000 +#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE + +#define CONFIG_SYS_NAND_CSPR_EXT (0x0) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_NAND \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ + | CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /* 64 Pages Per Block */ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x7) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x7) | \ + FTIM0_NAND_TWH(0xa)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0xe) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0xf) | \ + FTIM2_NAND_TREH(0xa) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +#ifdef CONFIG_NAND_BOOT +#define CONFIG_SPL_PAD_TO 0x20000 /* block aligned */ +#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO +#define CONFIG_SYS_NAND_U_BOOT_SIZE (640 << 10) +#endif + +/* + * CPLD + */ +#define CONFIG_SYS_CPLD_BASE 0x7fb00000 +#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE + +#define CONFIG_SYS_CPLD_CSPR_EXT (0x0) +#define CONFIG_SYS_CPLD_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ + CSPR_PORT_SIZE_8 | \ + CSPR_MSEL_GPCM | \ + CSPR_V) +#define CONFIG_SYS_CPLD_AMASK IFC_AMASK(64 * 1024) +#define CONFIG_SYS_CPLD_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ + CSOR_NOR_NOR_MODE_AVD_NOR | \ + CSOR_NOR_TRHZ_80) + +/* CPLD Timing parameters for IFC GPCM */ +#define CONFIG_SYS_CPLD_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \ + FTIM0_GPCM_TEADC(0xf) | \ + FTIM0_GPCM_TEAHC(0xf)) +#define CONFIG_SYS_CPLD_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define CONFIG_SYS_CPLD_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ + FTIM2_GPCM_TCH(0xf) | \ + FTIM2_GPCM_TWP(0xff)) +#define CONFIG_SYS_CPLD_FTIM3 0x0 + +/* IFC Timing Params */ +#ifdef CONFIG_NAND_BOOT +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 + +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 + +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif + +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_CPLD_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_CPLD_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_CPLD_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_CPLD_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_CPLD_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_CPLD_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_CPLD_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_CPLD_FTIM3 + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 + +/* + * Environment + */ +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_NAND_BOOT) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SD_BOOT) +#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE 0x20000 +#endif + +/* FMan */ +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_CMD_MII +#define CONFIG_PHYLIB +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ + +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_REALTEK +#define CONFIG_PHY_AQUANTIA + +#define RGMII_PHY1_ADDR 0x1 +#define RGMII_PHY2_ADDR 0x2 + +#define QSGMII_PORT1_PHY_ADDR 0x4 +#define QSGMII_PORT2_PHY_ADDR 0x5 +#define QSGMII_PORT3_PHY_ADDR 0x6 +#define QSGMII_PORT4_PHY_ADDR 0x7 + +#define FM1_10GEC1_PHY_ADDR 0x1 + +#define CONFIG_ETHPRIME "FM1@DTSEC3" +#endif + +#endif /* __LS1043ARDB_H__ */ diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 9c8a864..0011e72 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -9,8 +9,10 @@ #define CONFIG_REMAKE_ELF +#define CONFIG_FSL_LAYERSCAPE #define CONFIG_FSL_LSCH3 #define CONFIG_LS2085A +#define CONFIG_MP #define CONFIG_GICV3 #define CONFIG_FSL_TZPC_BP147 @@ -18,12 +20,15 @@ #define CONFIG_ARM_ERRATA_828024 #define CONFIG_ARM_ERRATA_826974 -#include <asm/arch-fsl-lsch3/ls2085a_stream_id.h> -#include <asm/arch-fsl-lsch3/config.h> +#include <asm/arch/ls2085a_stream_id.h> +#include <asm/arch/config.h> #if (defined(CONFIG_SYS_FSL_SRDS_1) || defined(CONFIG_SYS_FSL_SRDS_2)) #define CONFIG_SYS_HAS_SERDES #endif +/* Link Definitions */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) + /* We need architecture specific misc initializations */ #define CONFIG_ARCH_MISC_INIT @@ -46,6 +51,7 @@ /* Flat Device Tree Definitions */ #define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS /* new uImage format support */ #define CONFIG_FIT @@ -61,6 +67,7 @@ #define CONFIG_SYS_FSL_DDR_INTLV_256B /* force 256 byte interleaving */ +#define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/ls2085aqds.h b/include/configs/ls2085aqds.h index 4cfcf98..406d0e6 100644 --- a/include/configs/ls2085aqds.h +++ b/include/configs/ls2085aqds.h @@ -16,7 +16,7 @@ unsigned long get_board_sys_clk(void); unsigned long get_board_ddr_clk(void); #endif -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() #define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) diff --git a/include/configs/ls2085ardb.h b/include/configs/ls2085ardb.h index 583fed5..f95d7b2 100644 --- a/include/configs/ls2085ardb.h +++ b/include/configs/ls2085ardb.h @@ -18,7 +18,7 @@ unsigned long get_board_sys_clk(void); #endif -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #define CONFIG_DDR_CLK_FREQ 133333333 #define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) @@ -331,6 +331,7 @@ unsigned long get_board_sys_clk(void); /* MAC/PHY configuration */ #ifdef CONFIG_FSL_MC_ENET #define CONFIG_PHYLIB_10G +#define CONFIG_PHY_AQUANTIA #define CONFIG_PHY_CORTINA #define CONFIG_PHYLIB #define CONFIG_SYS_CORTINA_FW_IN_NOR diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index 152e295..fbaa600 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -17,7 +17,7 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_REVISION_TAG #define CONFIG_SYS_NO_FLASH -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK #define CONFIG_FIT diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 9c53fb4..10a6ce9 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -3,7 +3,7 @@ * Stelian Pop <stelian@popies.net> * Lead Tech Design <www.leadtechdesign.com> * - * (C) Copyright 2009-2011 + * (C) Copyright 2009-2015 * Daniel Gorsulowski <daniel.gorsulowski@esd.eu> * esd electronic system design gmbh <www.esd.eu> * @@ -27,7 +27,7 @@ * Since the linker has to swallow that define, we must use a pure * hex number here! */ -#define CONFIG_SYS_TEXT_BASE 0x20002000 +#define CONFIG_SYS_TEXT_BASE 0x21F00000 /* * since a number of boards are not being listed in linux @@ -56,14 +56,13 @@ #define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */ #define CONFIG_PREBOOT /* enable preboot variable */ +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT /* * Hardware drivers */ -/* required until arch/arm/include/asm/arch-at91/at91sam9263.h is reworked */ -#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP - /* general purpose I/O */ #define CONFIG_AT91_GPIO @@ -87,10 +86,17 @@ /* * Command line configuration. */ +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMLS + #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP + +#ifdef CONFIG_SYS_USE_NANDFLASH #define CONFIG_CMD_NAND -#define CONFIG_CMD_USB +#endif /* LED */ #define CONFIG_AT91_LED @@ -99,9 +105,12 @@ * SDRAM: 1 bank, min 32, max 128 MB * Initialized before u-boot gets started. */ +#define PHYS_SDRAM ATMEL_BASE_CS1 /* 0x20000000 */ +#define PHYS_SDRAM_SIZE 0x02000000 /* 32 MByte */ + #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x20000000 /* ATMEL_BASE_CS1 */ -#define CONFIG_SYS_SDRAM_SIZE 0x02000000 +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_SIZE #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x00100000) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01E00000) @@ -133,7 +142,7 @@ #ifdef CONFIG_CMD_NAND # define CONFIG_NAND_ATMEL # define CONFIG_SYS_MAX_NAND_DEVICE 1 -# define CONFIG_SYS_NAND_BASE 0x40000000 /* ATMEL_BASE_CS3 */ +# define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 /* 0x40000000 */ # define CONFIG_SYS_NAND_DBW_8 # define CONFIG_SYS_NAND_MASK_ALE (1 << 21) # define CONFIG_SYS_NAND_MASK_CLE (1 << 22) @@ -148,19 +157,6 @@ #define CONFIG_NET_RETRY_COUNT 20 #undef CONFIG_RESET_PHY_R -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 - -/* CAN */ -#define CONFIG_AT91_CAN - /* hw-controller addresses */ #define CONFIG_ET1100_BASE 0x70000000 @@ -190,6 +186,8 @@ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER /* * Size of malloc() pool diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 0ee8e0d..f113302 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -14,7 +14,7 @@ #define CONFIG_MX25 #define CONFIG_SYS_TEXT_BASE 0x81200000 #define CONFIG_MXC_GPIO -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK #define CONFIG_SYS_TIMER_RATE 32768 #define CONFIG_SYS_TIMER_COUNTER \ diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 41f518e..1b2f952 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -19,7 +19,7 @@ #define CONFIG_MX35 #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK /* Set TEXT at the beginning of the NOR flash */ #define CONFIG_SYS_TEXT_BASE 0xA0000000 diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 35c9346..32cd58e 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -18,7 +18,7 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK #define CONFIG_SYS_TEXT_BASE 0x97800000 #include <asm/arch/imx-regs.h> diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index be37ce5..fdb4134 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -23,7 +23,7 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 81af248..37430f0 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -23,7 +23,7 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK #define CONFIG_OF_LIBFDT diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 53fb4f7..54d3e3e 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -22,7 +22,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index f5fcd83..d915b88 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -23,7 +23,7 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index ba13178..29bfbde 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -45,7 +45,7 @@ #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK /* ATAGs */ #define CONFIG_CMDLINE_TAG diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index fc6aa9d..ffe4d81 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -21,6 +21,7 @@ #define CONFIG_MXC_GPT_HCLK #define CONFIG_SYSCOUNTER_TIMER #define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */ +#define CONFIG_SYS_FSL_CLK /* Enable iomux-lpsr support */ #define CONFIG_IOMUX_LPSR diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 3c70158..648e48b 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -94,6 +94,8 @@ "boot.scr fat 0 1;" \ "boot.cmd fat 0 1;" \ "exynos5422-odroidxu3.dtb fat 0 1;" \ + "exynos5422-odroidxu3-lite.dtb fat 0 1;" \ + "exynos5422-odroidxu4.dtb fat 0 1;" \ "boot part 0 1;" \ "root part 0 2\0" @@ -113,9 +115,19 @@ /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */ #define CONFIG_MISC_COMMON +#define CONFIG_MISC_INIT_R #define CONFIG_SET_DFU_ALT_INFO #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) +/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */ +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_ODROID_REV_AIN 9 +#define CONFIG_REVISION_TAG +#define CONFIG_BOARD_TYPES + +#undef CONFIG_SYS_BOARD +#define CONFIG_SYS_BOARD "odroid" + /* Define new extra env settings, including DFU settings */ #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/openrd.h b/include/configs/openrd.h new file mode 100644 index 0000000..62f15b7 --- /dev/null +++ b/include/configs/openrd.h @@ -0,0 +1,138 @@ +/* + * (C) Copyright 2009 + * Net Insight <www.netinsight.net> + * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> + * + * Based on sheevaplug.h: + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_OPENRD_H +#define _CONFIG_OPENRD_H + +/* + * Version number information + */ +#ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE +# define CONFIG_IDENT_STRING "\nOpenRD-Ultimate" +#else +# ifdef CONFIG_BOARD_IS_OPENRD_CLIENT +# define CONFIG_IDENT_STRING "\nOpenRD-Client" +# else +# ifdef CONFIG_BOARD_IS_OPENRD_BASE +# define CONFIG_IDENT_STRING "\nOpenRD-Base" +# else +# error Unknown OpenRD board specified +# endif +# endif +#endif + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ +#define CONFIG_KW88F6281 1 /* SOC Name */ +#define CONFIG_MACH_OPENRD_BASE /* Machine type */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_SYS_THUMB_BUILD + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_SYS_MVFS +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB +#define CONFIG_CMD_IDE + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* + * Environment variables configurations + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ +#else +#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ +#endif +/* + * max 4k env size is enough, but in case of nand + * it has to be rounded to sector size + */ +#define CONFIG_ENV_SIZE 0x20000 /* 128k */ +#define CONFIG_ENV_ADDR 0x60000 +#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ +/* + * Environment is right behind U-Boot in flash. Make sure U-Boot + * doesn't grow into the environment area. + */ +#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET + +/* + * Default environment variables + */ +#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ + "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ + "${x_bootcmd_usb}; bootm 0x6400000;" + +#define MTDIDS_DEFAULT "nand0=nand_mtd" +#define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\ + "0x400000@0x100000(uImage),"\ + "0x1fb00000@0x500000(rootfs)" + +#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ + "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ + "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ + "x_bootcmd_usb=usb start\0" \ + "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \ + "mtdids="MTDIDS_DEFAULT"\0" \ + "mtdparts="MTDPARTS_DEFAULT"\0" + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +# ifdef CONFIG_BOARD_IS_OPENRD_BASE +# define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +# else +# define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ +# endif +# ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE +# define CONFIG_PHY_BASE_ADR 0x0 +# define PHY_NO "88E1121" +# else +# define CONFIG_PHY_BASE_ADR 0x8 +# define PHY_NO "88E1116" +# endif +#endif /* CONFIG_CMD_NET */ + +/* + * SATA Driver configuration + */ +#ifdef CONFIG_MVSATA_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET +#endif /*CONFIG_MVSATA_IDE*/ + +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MVEBU_MMC +#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE +#endif /* CONFIG_CMD_MMC */ + +#endif /* _CONFIG_OPENRD_BASE_H */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 03eb185..433c409 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -11,7 +11,6 @@ #define __CONFIG_H #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK #ifdef CONFIG_36BIT #define CONFIG_PHYS_64BIT diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index 46f5f0f..d83daa0 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -11,7 +11,6 @@ #define __CONFIG_H #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK #if defined(CONFIG_TWR_P1025) #define CONFIG_BOARDNAME "TWR-P1025" #define CONFIG_P1025 diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index 1796995..8191fb2 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -9,6 +9,7 @@ #define __CONFIG_H #define CONFIG_STM32F4 +#define CONFIG_SYS_THUMB_BUILD #define CONFIG_STM32F4DISCOVERY #define CONFIG_OF_LIBFDT diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 651c4c4..68da23e 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -19,9 +19,7 @@ #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ #endif -#ifndef CONFIG_ARM64 #define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */ -#endif #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 02b0e63..0ab69e6 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -17,6 +17,7 @@ #define __CONFIG_H /* High Level Configuration Options */ +#define CONFIG_SYS_THUMB_BUILD #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP_COMMON /* Common ARM Erratas */ diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index 6735055..6f66662 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -14,7 +14,7 @@ #define CONFIG_MX53 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_OF_LIBFDT #define CONFIG_MXC_GPIO diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index abd1e98..a3ea2e0 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -15,7 +15,7 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK #define CONFIG_MACH_TYPE 4146 diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index e6f3e28..2acebf1 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -16,7 +16,7 @@ /* High Level Configuration Options */ #define CONFIG_MX35 #define CONFIG_MX35_HCLK_FREQ 24000000 -#define CONFIG_FSL_CLK +#define CONFIG_SYS_FSL_CLK #define CONFIG_SYS_DCACHE_OFF #define CONFIG_SYS_CACHELINE_SIZE 32 diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 32ee0fc..36c1100 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -55,9 +55,7 @@ # define CONFIG_ARM_DCC # define CONFIG_CPU_ARMV8 #else -# if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1) -# define CONFIG_ZYNQ_SERIAL -# endif +# define CONFIG_ZYNQ_SERIAL #endif #define CONFIG_CONS_INDEX 0 diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h index e476eb1..ed6023a 100644 --- a/include/configs/xilinx_zynqmp_ep.h +++ b/include/configs/xilinx_zynqmp_ep.h @@ -18,7 +18,6 @@ #define CONFIG_ZYNQ_GEM0 #define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 -#define CONFIG_ZYNQ_SERIAL_UART0 #define CONFIG_ZYNQ_SDHCI0 #define CONFIG_ZYNQ_I2C0 #define CONFIG_SYS_I2C_ZYNQ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index ca5ef04..f98101f 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -179,7 +179,10 @@ # define CONFIG_CMD_FS_GENERIC #endif +#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1) #define CONFIG_SYS_I2C_ZYNQ +#endif + /* I2C */ #if defined(CONFIG_SYS_I2C_ZYNQ) # define CONFIG_CMD_I2C @@ -329,7 +332,11 @@ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#ifdef CONFIG_OF_CONTROL +# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" +#else +# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#endif #endif /* Disable dcache for SPL just for sure */ diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h index 549a664..b5ffafb 100644 --- a/include/configs/zynq_microzed.h +++ b/include/configs/zynq_microzed.h @@ -12,7 +12,6 @@ #define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024) -#define CONFIG_ZYNQ_SERIAL_UART1 #define CONFIG_ZYNQ_GEM0 #define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 diff --git a/include/configs/zynq_picozed.h b/include/configs/zynq_picozed.h index d116e05..ffc73bd 100644 --- a/include/configs/zynq_picozed.h +++ b/include/configs/zynq_picozed.h @@ -12,7 +12,6 @@ #define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024) -#define CONFIG_ZYNQ_SERIAL_UART1 #define CONFIG_ZYNQ_GEM0 #define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h index b659054..468a6bc 100644 --- a/include/configs/zynq_zc70x.h +++ b/include/configs/zynq_zc70x.h @@ -12,7 +12,6 @@ #define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024) -#define CONFIG_ZYNQ_SERIAL_UART1 #define CONFIG_ZYNQ_GEM0 #define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h index 7a1b872..63224dd 100644 --- a/include/configs/zynq_zc770.h +++ b/include/configs/zynq_zc770.h @@ -15,26 +15,20 @@ #define CONFIG_SYS_NO_FLASH #if defined(CONFIG_ZC770_XM010) -# define CONFIG_ZYNQ_SERIAL_UART1 # define CONFIG_ZYNQ_GEM0 # define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 # define CONFIG_ZYNQ_SDHCI0 # define CONFIG_ZYNQ_SPI #elif defined(CONFIG_ZC770_XM011) -# define CONFIG_ZYNQ_SERIAL_UART1 #elif defined(CONFIG_ZC770_XM012) -# define CONFIG_ZYNQ_SERIAL_UART1 # undef CONFIG_SYS_NO_FLASH #elif defined(CONFIG_ZC770_XM013) -# define CONFIG_ZYNQ_SERIAL_UART0 # define CONFIG_ZYNQ_GEM1 # define CONFIG_ZYNQ_GEM_PHY_ADDR1 7 -#else -# define CONFIG_ZYNQ_SERIAL_UART0 #endif #include <configs/zynq-common.h> diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h index 946de95..6ec6117 100644 --- a/include/configs/zynq_zed.h +++ b/include/configs/zynq_zed.h @@ -12,7 +12,6 @@ #define CONFIG_SYS_SDRAM_SIZE (512 * 1024 * 1024) -#define CONFIG_ZYNQ_SERIAL_UART1 #define CONFIG_ZYNQ_GEM0 #define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 diff --git a/include/configs/zynq_zybo.h b/include/configs/zynq_zybo.h index 191f2a5..e2270cd 100644 --- a/include/configs/zynq_zybo.h +++ b/include/configs/zynq_zybo.h @@ -13,7 +13,6 @@ #define CONFIG_SYS_SDRAM_SIZE (512 * 1024 * 1024) -#define CONFIG_ZYNQ_SERIAL_UART1 #define CONFIG_ZYNQ_GEM0 #define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 |