diff options
| author | Nikita Kiryanov <nikita@compulab.co.il> | 2016-02-19 19:19:49 +0200 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2016-02-24 18:44:09 -0500 |
| commit | 43e568c4ae9a35e2458737c7d995b183e21b8a6f (patch) | |
| tree | a76e705274d8cc2bce3ca9c6f7162b8bda0a7ae9 /include/configs | |
| parent | e038e2a89b213640143d6ab1bbf73b134292e4dc (diff) | |
| download | u-boot-imx-43e568c4ae9a35e2458737c7d995b183e21b8a6f.zip u-boot-imx-43e568c4ae9a35e2458737c7d995b183e21b8a6f.tar.gz u-boot-imx-43e568c4ae9a35e2458737c7d995b183e21b8a6f.tar.bz2 | |
arm: am437x: cm-t43: set MPU and CORE voltages on boot
During boot, U-Boot raises the CPU frequency but the CORE and MPU regulators
are not updated. This is not a problem in cold boot since the default values
that the pmic outputs are correct, but if Linux were to switch the module to a
low power OPP, the new voltage values will be retained after a reboot and the
module will likely hang once U-Boot raises the CPU frequency back up.
Set both CORE and MPU regulators to to 1.1V on boot.
Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/cm_t43.h | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index 3bc3336..329a5ea 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -167,5 +167,7 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT #endif /* __CONFIG_CM_T43_H */ |