arm: Remove ima3-mx53 board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 238 deletions

diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h
deleted file mode 100644
index 2fa6c3d..0000000
--- a/include/configs/ima3-mx53.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * (C) Copyright 2012, Stefano Babic <sbabic@denx.de>
- *
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * Configuration settings for the MX53-EVK Freescale board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* SOC type must be included before imx-regs.h */
-#define CONFIG_MX53
-#include <asm/arch/imx-regs.h>
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_OF_LIBFDT
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
-/* Enable GPIOs */
-#define CONFIG_MXC_GPIO
-
-/* UART */
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE	UART4_BASE_ADDR
-
-/* MMC */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#define CONFIG_SYS_FSL_ESDHC_NUM	1
-
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-
-/* Ethernet on FEC */
-#define CONFIG_MII
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE			FEC_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR		0x01
-#define CONFIG_PHY_ADDR			CONFIG_FEC_MXC_PHYADDR
-#define CONFIG_RESET_PHY_R
-#define CONFIG_FEC_MXC_NO_ANEG
-#define CONFIG_ETHPRIME			"FEC0"
-
-/* SPI */
-#define CONFIG_HARD_SPI
-#define CONFIG_MXC_SPI
-#define CONFIG_DEFAULT_SPI_BUS		1
-#define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_0
-
-/* SPI FLASH - not used for environment */
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
-#define CONFIG_SF_DEFAULT_SPEED		25000000
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_BAUDRATE			115200
-
-/* Command definition */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_GPIO
-
-#define CONFIG_BOOTDELAY	3
-
-#define CONFIG_LOADADDR		0x70800000	/* loadaddr env var */
-#define CONFIG_SYS_TEXT_BASE    0xf0001400 /* uboot in nor flash */
-
-#define CONFIG_ARP_TIMEOUT	200UL
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START       0x70000000
-#define CONFIG_SYS_MEMTEST_END         0x10000
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-
-#define CONFIG_CMDLINE_EDITING
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS	1
-#define PHYS_SDRAM_1		CSD0_BASE_ADDR
-#define PHYS_SDRAM_1_SIZE	(1024 * 1024 * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
-#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
-#define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
-#define MTDIDS_DEFAULT		"nor0=f0000000.flash"
-
-/* FLASH and environment organization */
-
-#define CONFIG_SYS_FLASH_BASE		0xF0000000
-#define CONFIG_SYS_FLASH_CFI		/* Flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER		/* Use the common driver */
-#define CONFIG_FLASH_CFI_MTD		/* with MTD support */
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	1024
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-
-#define CONFIG_ENV_SIZE        (8 * 1024)
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + \
-				CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
-					CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-
-/*
- * Default environment and default scripts
- * to update uboot and load kernel
- */
-
-#define HOSTNAME ima3-mx53
-
-#define CONFIG_HOSTNAME ima3-mx53
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram0 rw\0"			\
-	"addip_sta=setenv bootargs ${bootargs} "			\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
-	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
-		"else run addip_sta;fi\0"	\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"addtty=setenv bootargs ${bootargs}"				\
-		" console=${console},${baudrate}\0"			\
-	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
-	"console=ttymxc3\0"						\
-	"loadaddr=70800000\0"						\
-	"kernel_addr_r=70800000\0"					\
-	"ramdisk_addr_r=71000000\0"					\
-	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
-	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
-	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"	\
-	"mmcargs=setenv bootargs root=${mmcroot} "			\
-		"rootfstype=${mmcrootfstype}\0"				\
-	"mmcroot=/dev/mmcblk0p3 rw\0"					\
-	"mmcboot=echo Booting from mmc ...; "				\
-		"run mmcargs addip addtty addmtd addmisc mmcload;"	\
-		"bootm\0"						\
-	"mmcload=fatload mmc ${mmcdev}:${mmcpart} "			\
-		"${loadaddr} ${uimage}\0"				\
-	"mmcrootfstype=ext3 rootwait\0"					\
-	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr}\0"				\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
-		"run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr_r}\0"				\
-	"net_self_load=tftp ${ramdisk_addr_r} ${ramdisk_file};"		\
-		"tftp ${kernel_addr_r} ${bootfile}\0"			\
-	"net_self=if run net_self_load;then "				\
-		"run ramargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
-		"else echo Images not loades;fi\0"			\
-	"satargs=setenv bootargs root=/dev/sda1\0"			\
-	"satafile=boot/uImage\0"					\
-	"ssdboot=echo Booting from ssd ...; "				\
-		"run satargs addip addtty addmtd addmisc;"		\
-		"sata init;ext2load sata 0:1 ${kernel_addr_r} "		\
-		"${satafile};bootm\0"					\
-	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.imx\0"		\
-	"uimage=uImage\0"						\
-	"load=tftp ${loadaddr} ${u-boot}\0"				\
-	"uboot_addr=0xf0001000\0"					\
-	"update=protect off 0xf0000000 +60000;"				\
-		"erase ${uboot_addr} +60000;"				\
-		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
-	"upd=if run load;then echo Updating u-boot;if run update;"	\
-		"then echo U-Boot updated;"				\
-			"else echo Error updating u-boot !;"		\
-			"echo Board without bootloader !!;"		\
-		"fi;"							\
-		"else echo U-Boot not downloaded..exiting;fi\0"		\
-	"bootcmd=run net_nfs\0"
-
-
-#define CONFIG_CMD_SATA
-#ifdef CONFIG_CMD_SATA
-	#define CONFIG_DWC_AHSATA
-	#define CONFIG_SYS_SATA_MAX_DEVICE      1
-	#define CONFIG_DWC_AHSATA_PORT_ID       0
-	#define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
-	#define CONFIG_LBA48
-	#define CONFIG_LIBATA
-#endif
-
-#endif				/* __CONFIG_H */