summaryrefslogtreecommitdiff
path: root/include/configs/xpedite550x.h
diff options
context:
space:
mode:
authorKumar Gala <galak@kernel.crashing.org>2010-12-01 22:55:54 -0600
committerKumar Gala <galak@kernel.crashing.org>2010-12-13 09:32:15 -0600
commit72c96a6802d9b1c949785d1d152f8bc8666c753d (patch)
treee22f1e828882e091dc84c32ebdfef592195d0763 /include/configs/xpedite550x.h
parentac8983bcba75576c50307b5e8dc8fb848740ee61 (diff)
downloadu-boot-imx-72c96a6802d9b1c949785d1d152f8bc8666c753d.zip
u-boot-imx-72c96a6802d9b1c949785d1d152f8bc8666c753d.tar.gz
u-boot-imx-72c96a6802d9b1c949785d1d152f8bc8666c753d.tar.bz2
tsec: Revert to setting TBICR_ANEG_ENABLE by default for SGMII
The following commit: commit 46e91674fb4b6d06c6a4984c0b5ac7d9a16923f4 Author: Peter Tyser <ptyser@xes-inc.com> Date: Tue Nov 3 17:52:07 2009 -0600 tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode Removed setting Auto-Neg by default, however this is believed to be proper default configuration for initialization of the TBI interface. Instead we explicitly set CONFIG_TSEC_TBICR_SETTINGS for the XPedite5370 & XPedite5500 boards that use a Broadcomm PHY which require Auto-Neg to be disabled to function properly. This addresses a breakage on the P2020 DS & MPC8572 DS boards when used with an SGMII riser card. We also remove setting CONFIG_TSEC_TBICR_SETTINGS on the P1_P2_RDB family of boards as now the default setting is sufficient for them. Additionally, we clean up the code a bit to remove an unnecessary second define. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Peter Tyser <ptyser@xes-inc.com>
Diffstat (limited to 'include/configs/xpedite550x.h')
-rw-r--r--include/configs/xpedite550x.h10
1 files changed, 10 insertions, 0 deletions
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index 42d1f69..a051913 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -345,6 +345,16 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
#define CONFIG_ETHPRIME "eTSEC2"
+/*
+ * In-band SGMII auto-negotiation between TBI and BCM5482S PHY fails, force
+ * 1000mbps SGMII link
+ */
+#define CONFIG_TSEC_TBICR_SETTINGS ( \
+ TBICR_PHY_RESET \
+ | TBICR_FULL_DUPLEX \
+ | TBICR_SPEED1_SET \
+ )
+
#define CONFIG_TSEC1 1
#define CONFIG_TSEC1_NAME "eTSEC1"
#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)