diff options
| author | Vignesh R <vigneshr@ti.com> | 2016-12-21 10:42:32 +0530 |
|---|---|---|
| committer | Jagan Teki <jagan@openedev.com> | 2017-01-04 16:38:12 +0100 |
| commit | 57897c13de03ac0136d64641a3eab526c6810387 (patch) | |
| tree | 1449b0c095cc64911392faf76b8e86a8e194feee /include/configs/socfpga_common.h | |
| parent | 87f5f5417fc897df0b05826b408f0f4b7d2ee388 (diff) | |
| download | u-boot-imx-57897c13de03ac0136d64641a3eab526c6810387.zip u-boot-imx-57897c13de03ac0136d64641a3eab526c6810387.tar.gz u-boot-imx-57897c13de03ac0136d64641a3eab526c6810387.tar.bz2 | |
spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
According to Section 11.15.4.9.2 Indirect Write Controller of K2G SoC
TRM SPRUHY8D[1], the external master is only permitted to issue 32-bit
data interface writes until the last word of an indirect transfer
otherwise indirect writes is known to fails sometimes. So, make sure
that QSPI indirect writes are 32 bit sized except for the last write. If
the txbuf is unaligned then use bounce buffer to avoid data aborts.
So, now that the driver uses bounce_buffer, enable CONFIG_BOUNCE_BUFFER
for all boards that use Cadence QSPI driver.
[1]www.ti.com/lit/ug/spruhy8d/spruhy8d.pdf
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Diffstat (limited to 'include/configs/socfpga_common.h')
| -rw-r--r-- | include/configs/socfpga_common.h | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 2c40827..31f1338 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -207,6 +207,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz() #endif #define CONFIG_CQSPI_DECODER 0 +#define CONFIG_BOUNCE_BUFFER /* * Designware SPI support |