MA-9409-3 Add base board support for android and android things.

* add board support for android and android things.
  mx6ul_nxpu_iopb, pico-6ul, pico-imx7d, aquila-6ul
  reorganize the Kconfig, and fix the redefine issue.
* add android configure into configure-while
* add a common file mx_android_common.h
  it will be included by android and android things.
  defconfig only include ANDROID_THINGS_SUPPORT or ANDROID_SUPPORT
* move partition_table_valid into f_fastboot.c.
  it's a common code.
* add invalidate_dcache_range in fixed order.
  It will have salt invalid issue if we do not add it in order
* add display for pico-7d.

Change-Id: I6f8a4876c2f8bbd098034d1e3f53033109300bca
Signed-off-by: zhang sanshan <sanshan.zhang@nxp.com>

1 files changed, 286 insertions, 0 deletions

diff --git a/include/configs/picosom-imx6ul.h b/include/configs/picosom-imx6ul.h
new file mode 100644
index 0000000..91c5684
--- /dev/null
+++ b/include/configs/picosom-imx6ul.h
@@ -0,0 +1,286 @@
+/*
+ * Copyright (C) 2015 Technexion Ltd.
+ *
+ * Configuration settings for the Technexion PicoSOM i.mx6UL board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef __PICOSOM_IMX6UL_CONFIG_H
+#define __PICOSOM_IMX6UL_CONFIG_H
+
+
+#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
+#include "mx6_common.h"
+#include <asm/imx-common/gpio.h>
+
+/* uncomment for SECURE mode support */
+/* #define CONFIG_SECURE_BOOT */
+
+#ifdef CONFIG_SECURE_BOOT
+#ifndef CONFIG_CSF_SIZE
+#define CONFIG_CSF_SIZE 0x4000
+#endif
+#endif
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
+
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE		MX6UL_UART6_BASE_ADDR
+
+/* MMC Configs */
+#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC1_BASE_ADDR
+#define CONFIG_SYS_FSL_USDHC_NUM	1
+
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define CONFIG_FEC_ENET_DEV 1
+
+#if (CONFIG_FEC_ENET_DEV == 0)
+#define IMX_FEC_BASE			ENET_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR          0x2
+#define CONFIG_FEC_XCV_TYPE             RMII
+#elif (CONFIG_FEC_ENET_DEV == 1)
+#define IMX_FEC_BASE			ENET2_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR          0x1  /* need board rework */
+#define CONFIG_FEC_XCV_TYPE             RMII
+#endif
+#define CONFIG_ETHPRIME                 "FEC"
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#endif
+
+/* I2C configs */
+#define CONFIG_CMD_I2C
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_SPEED		100000
+#endif
+
+
+#define PHYS_SDRAM_SIZE                        SZ_512M
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE3000
+#define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08
+
+
+/* #define CONFIG_VIDEO */
+
+#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
+
+
+#define CONFIG_MFG_ENV_SETTINGS \
+	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
+		"rdinit=/linuxrc " \
+		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
+		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
+		"g_mass_storage.iSerialNumber=\"\" "\
+		"clk_ignore_unused "\
+		"\0" \
+	"initrd_addr=0x83800000\0" \
+	"initrd_high=0xffffffff\0" \
+	"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
+
+#if defined(CONFIG_SYS_BOOT_NAND)
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	CONFIG_MFG_ENV_SETTINGS \
+	"panel=TFT43AB\0" \
+	"fdt_addr=0x83000000\0" \
+	"fdt_high=0xffffffff\0"	  \
+	"console=ttymxc5\0" \
+	"bootargs=console=ttymxc5,115200 ubi.mtd=3 "  \
+		"root=ubi0:rootfs rootfstype=ubifs "		     \
+		"mtdparts=gpmi-nand:64m(boot),16m(kernel),16m(dtb),-(rootfs)\0"\
+	"bootcmd=nand read ${loadaddr} 0x4000000 0x800000;"\
+		"nand read ${fdt_addr} 0x5000000 0x100000;"\
+		"bootz ${loadaddr} - ${fdt_addr}\0"
+
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	CONFIG_MFG_ENV_SETTINGS \
+	"panel=TFT43AB\0" \
+	"script=boot.scr\0" \
+	"image=zImage\0" \
+	"console=ttymxc5\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"fdt_addr=0x83000000\0" \
+	"boot_fdt=try\0" \
+	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcautodetect=yes\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=${mmcroot}\0" \
+	"loadbootscript=" \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+	   "mmc dev ${mmcdev};" \
+	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "if run loadbootscript; then " \
+			   "run bootscript; " \
+		   "else " \
+			   "if run loadimage; then " \
+				   "run mmcboot; " \
+			   "else run netboot; " \
+			   "fi; " \
+		   "fi; " \
+	   "else run netboot; fi"
+#endif
+
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1))
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_STACKSIZE		SZ_128K
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_ENV_SIZE			SZ_8K
+
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_FSL_QSPI
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#elif defined CONFIG_SYS_BOOT_NAND
+#define CONFIG_SYS_USE_NAND
+#define CONFIG_ENV_IS_IN_NAND
+#else
+#define CONFIG_ENV_IS_IN_MMC
+#endif
+
+#ifdef CONFIG_SYS_USE_NAND
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
+
+/* NAND stuff */
+#define CONFIG_NAND_MXS
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* DMA stuff, needed for GPMI/MXS NAND support */
+#define CONFIG_APBH_DMA
+#define CONFIG_APBH_DMA_BURST
+#define CONFIG_APBH_DMA_BURST8
+#endif
+
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_QSPI_BASE		QSPI0_BASE_ADDR
+#define CONFIG_QSPI_MEMMAP_BASE		QSPI0_AMBA_BASE
+
+#define CONFIG_CMD_SF
+#define	CONFIG_SPI_FLASH
+#define	CONFIG_SPI_FLASH_STMICRO
+#define	CONFIG_SPI_FLASH_BAR
+#define	CONFIG_SF_DEFAULT_BUS		0
+#define	CONFIG_SF_DEFAULT_CS		0
+#define	CONFIG_SF_DEFAULT_SPEED		40000000
+#define	CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#define FSL_QSPI_FLASH_NUM              1
+#define FSL_QSPI_FLASH_SIZE             SZ_32M
+#endif
+
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_ENV_OFFSET		(13 * SZ_64K)
+#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+#define CONFIG_ENV_OFFSET		(384 * 1024)
+#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
+#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
+#elif defined(CONFIG_ENV_IS_IN_NAND)
+#undef CONFIG_ENV_SIZE
+#define CONFIG_ENV_OFFSET		(60 << 20)
+#define CONFIG_ENV_SECT_SIZE		(128 << 10)
+#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
+#endif
+
+#define CONFIG_SYS_MMC_ENV_DEV		1   /* USDHC2 */
+#define CONFIG_SYS_MMC_ENV_PART		1	/* user area */
+#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
+
+#define CONFIG_CMD_BMODE
+
+#ifdef CONFIG_VIDEO
+#define	CONFIG_CFB_CONSOLE
+#define	CONFIG_VIDEO_MXS
+#define	CONFIG_VIDEO_LOGO
+#define	CONFIG_VIDEO_SW_CURSOR
+#define	CONFIG_VGA_AS_SINGLE_DEVICE
+#define	CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define	CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define	CONFIG_CMD_BMP
+#define	CONFIG_BMP_16BPP
+#define	CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_IMX_VIDEO_SKIP
+#endif
+
+/* USB Configs */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS   0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#endif
+
+#define PRODUCT_NAME "imx6ul_pico"
+#define VARIANT_NAME "imx6ul_pico"
+
+#if defined(CONFIG_ANDROID_THINGS_SUPPORT)
+#include "picosom-imx6ul_android_things.h"
+#endif
+
+#endif