summaryrefslogtreecommitdiff
path: root/include/configs/integratorcp.h
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2012-08-04 05:21:28 +0000
committerTom Rini <trini@ti.com>2012-09-04 08:51:13 -0700
commite62b008fe341030f4a80a09b66952bba65027b70 (patch)
tree63c8a32f2d0e64b5274a69dff3618ba794305c62 /include/configs/integratorcp.h
parenta9f1a4893364ddbb8b7942cded91d4c17c4f5948 (diff)
downloadu-boot-imx-e62b008fe341030f4a80a09b66952bba65027b70.zip
u-boot-imx-e62b008fe341030f4a80a09b66952bba65027b70.tar.gz
u-boot-imx-e62b008fe341030f4a80a09b66952bba65027b70.tar.bz2
integrator: break out common config
The configuration that is common for all Integrator boards may just as well be stored in a common include file as per pattern from other boards. This eases maintenance quite a bit. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'include/configs/integratorcp.h')
-rw-r--r--include/configs/integratorcp.h115
1 files changed, 5 insertions, 110 deletions
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index d5043df..ca02a6f 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -31,32 +31,11 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-/* Integrator-specific configuration */
-#define CONFIG_INTEGRATOR
-#define CONFIG_ARCH_CINTEGRATOR
-#define CONFIG_CM_INIT
-#define CONFIG_CM_REMAP
-#define CONFIG_CM_SPD_DETECT
+#include "integrator-common.h"
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SYS_TEXT_BASE 0x01000000
-#define CONFIG_SYS_MEMTEST_START 0x100000
-#define CONFIG_SYS_MEMTEST_END 0x10000000
-#define CONFIG_SYS_HZ 1000
+/* Integrator CP-specific configuration */
+#define CONFIG_ARCH_CINTEGRATOR
#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */
-#define CONFIG_SYS_TIMERBASE 0x13000100
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
/*
* Hardware drivers
@@ -66,9 +45,7 @@
#define CONFIG_SMC91111_BASE 0xC8000000
#undef CONFIG_SMC91111_EXT_PHY
-/*
- * NS16550 Configuration
- */
+/* PL011 configuration */
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK 14745600
#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
@@ -77,16 +54,6 @@
#define CONFIG_SYS_SERIAL0 0x16000000
#define CONFIG_SYS_SERIAL1 0x17000000
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
/*
* Command line configuration.
*/
@@ -102,32 +69,10 @@
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "Integrator-CP # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size*/
-#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
+/*
* FLASH and environment organization
-
* Top varies according to amount fitted
* Reserve top 4 blocks of flash
* - ARM Boot Monitor
@@ -136,7 +81,6 @@
* - U-Boot environment
*
* Base is always 0x24000000
-
*/
#define CONFIG_SYS_FLASH_BASE 0x24000000
#define CONFIG_SYS_FLASH_CFI 1
@@ -178,53 +122,4 @@
#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */
#define CONFIG_ENV_SIZE 8192 /* 8KB */
-/*
- * The ARM boot monitor initializes the board.
- * However, the default U-Boot code also performs the initialization.
- * If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT
- * - see documentation supplied with board for details of how to choose the
- * image to run at reset/power up
- * e.g. whether the ARM Boot Monitor runs before U-Boot
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
- */
-
-/*
- * The ARM boot monitor does not relocate U-Boot.
- * However, the default U-Boot code performs the relocation check,
- * and may relocate the code if the memory map is changed.
- * If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT
-
-#define SKIP_CONFIG_RELOCATE_UBOOT
-
- */
-/*-----------------------------------------------------------------------
- * There are various dependencies on the core module (CM) fitted
- * Users should refer to their CM user guide
- * - when porting adjust u-boot/Makefile accordingly
- * to define the necessary CONFIG_ s for the CM involved
- * see e.g. cp_926ejs_config
- */
-
-#include "armcoremodule.h"
-
-/*
- * If CONFIG_SKIP_LOWLEVEL_INIT is not defined &
- * the core module has a CM_INIT register
- * then the U-Boot initialisation code will
- * e.g. ARM Boot Monitor or pre-loader is repeated once
- * (to re-initialise any existing CM_INIT settings to safe values).
- *
- * This is usually not the desired behaviour since the platform
- * will either reboot into the ARM monitor (or pre-loader)
- * or continuously cycle thru it without U-Boot running,
- * depending upon the setting of Integrator/CP switch S2-4.
- *
- * However it may be needed if Integrator/CP switch S2-1
- * is set OFF to boot direct into U-Boot.
- * In that case comment out the line below.
-#undef CONFIG_CM_INIT
- */
-
#endif /* __CONFIG_H */