summaryrefslogtreecommitdiff
path: root/include/configs/actux2.h
diff options
context:
space:
mode:
authorMarek Vasut <marex@denx.de>2014-01-28 00:06:45 +0100
committerMarek Vasut <marex@denx.de>2014-02-06 02:51:51 +0100
commit13e0ee7f9acf6f1af0db7147ea8d157668f45ca6 (patch)
treea46c73170f59afa5bf020b448a8cb2dd05c1caa9 /include/configs/actux2.h
parent373ee048a8bdc3291aa88b93da183a0bc3b34a22 (diff)
downloadu-boot-imx-13e0ee7f9acf6f1af0db7147ea8d157668f45ca6.zip
u-boot-imx-13e0ee7f9acf6f1af0db7147ea8d157668f45ca6.tar.gz
u-boot-imx-13e0ee7f9acf6f1af0db7147ea8d157668f45ca6.tar.bz2
ARM: IXP: Remove actux2 board
The board is unmaintained, just like the rest of the IXP. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Michael Schwingen <michael@schwingen.org> Cc: Tom Rini <trini@ti.com>
Diffstat (limited to 'include/configs/actux2.h')
-rw-r--r--include/configs/actux2.h206
1 files changed, 0 insertions, 206 deletions
diff --git a/include/configs/actux2.h b/include/configs/actux2.h
deleted file mode 100644
index f0cbff7..0000000
--- a/include/configs/actux2.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * Configuration settings for the AcTux-2 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_IXP425 1
-#define CONFIG_ACTUX2 1
-
-#define CONFIG_MACH_TYPE 1480
-
-#define CONFIG_DISPLAY_CPUINFO 1
-#define CONFIG_DISPLAY_BOARDINFO 1
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_SYS_LDSCRIPT "board/actux2/u-boot.lds"
-
-/***************************************************************
- * U-boot generic defines start here.
- ***************************************************************/
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command line configuration. */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-#undef CONFIG_CMD_PCI
-#undef CONFIG_PCI
-
-#define CONFIG_BOOTCOMMAND "run boot_flash"
-/* enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_REVISION_TAG 1
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_KGDB_BAUDRATE 230400
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000
-#define CONFIG_SYS_MEMTEST_END 0x00800000
-
-/* timer clock - 2* OSC_IN system clock */
-#define CONFIG_IXP425_TIMER_CLK 66666666
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR 0x00010000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
- 115200, 230400 }
-#define CONFIG_SERIAL_RTS_ACTIVE 1
-
-/* Expansion bus settings */
-#define CONFIG_SYS_EXP_CS0 0xbd113042
-
-/* SDRAM settings */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x00000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-/* 16MB SDRAM */
-#define CONFIG_SYS_SDR_CONFIG 0x3A
-#define PHYS_SDRAM_1_SIZE 0x01000000
-#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
-#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
-#define CONFIG_SYS_DRAM_SIZE 0x01000000
-
-/* FLASH organization */
-#define CONFIG_SYS_TEXT_BASE 0x50000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT 140
-#define PHYS_FLASH_1 0x50000000
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_BOARD_SIZE_LIMIT 262144
-
-/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* no byte writes on IXP4xx */
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Ethernet */
-
-/* include IXP4xx NPE support */
-#define CONFIG_IXP4XX_NPE 1
-/* NPE0 PHY address */
-#define CONFIG_PHY_ADDR 0x00
-/* MII PHY management */
-#define CONFIG_MII 1
-/* fixed-speed switch without standard PHY registers on MII */
-#define CONFIG_MII_NPE0_FIXEDLINK 1
-#define CONFIG_MII_NPE0_SPEED 100
-#define CONFIG_MII_NPE0_FULLDUPLEX 1
-
-/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SYS_RX_ETH_BUFFER 16
-#define CONFIG_RESET_PHY_R 1
-/* ethernet switch connected to MII port */
-#define CONFIG_MII_ETHSWITCH 1
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#undef CONFIG_CMD_NFS
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/*
- * environment organization:
- * one flash sector, embedded in uboot area (bottom bootblock flash)
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000)
-#define CONFIG_SYS_USE_PPCENV 1
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "npe_ucode=50040000\0" \
- "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
- "kerneladdr=50050000\0" \
- "kernelfile=actux2/uImage\0" \
- "rootfile=actux2/rootfs\0" \
- "rootaddr=50170000\0" \
- "loadaddr=10000\0" \
- "updateboot_ser=mw.b 10000 ff 40000;" \
- " loady ${loadaddr};" \
- " run eraseboot writeboot\0" \
- "updateboot_net=mw.b 10000 ff 40000;" \
- " tftp ${loadaddr} actux2/u-boot.bin;" \
- " run eraseboot writeboot\0" \
- "eraseboot=protect off 50000000 50003fff;" \
- " protect off 50006000 5003ffff;" \
- " erase 50000000 50003fff;" \
- " erase 50006000 5003ffff\0" \
- "writeboot=cp.b 10000 50000000 4000;" \
- " cp.b 16000 50006000 3a000\0" \
- "updateucode=loady;" \
- " era ${npe_ucode} +${filesize};" \
- " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
- "updateroot=tftp ${loadaddr} ${rootfile};" \
- " era ${rootaddr} +${filesize};" \
- " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
- "updatekern=tftp ${loadaddr} ${kernelfile};" \
- " era ${kerneladdr} +${filesize};" \
- " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \
- "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
- "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
- "boot_flash=run flashargs addtty addeth;" \
- " bootm ${kerneladdr}\0" \
- "boot_net=run netargs addtty addeth;" \
- " tftpboot ${loadaddr} ${kernelfile};" \
- " bootm\0"
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */