summaryrefslogtreecommitdiff
path: root/include/configs/RPXsuper.h
diff options
context:
space:
mode:
authorwdenk <wdenk>2002-11-03 00:07:02 +0000
committerwdenk <wdenk>2002-11-03 00:07:02 +0000
commit5b1d713721c3ea02549940133f09236783dda1f9 (patch)
tree78c0a58b5cc48142617190669a7598e0ca3307dc /include/configs/RPXsuper.h
parent47d1a6e1ed87fe1fb3d737acdb85f69bc3259522 (diff)
downloadu-boot-imx-5b1d713721c3ea02549940133f09236783dda1f9.zip
u-boot-imx-5b1d713721c3ea02549940133f09236783dda1f9.tar.gz
u-boot-imx-5b1d713721c3ea02549940133f09236783dda1f9.tar.bz2
Initial revision
Diffstat (limited to 'include/configs/RPXsuper.h')
-rw-r--r--include/configs/RPXsuper.h505
1 files changed, 505 insertions, 0 deletions
diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h
new file mode 100644
index 0000000..c364672
--- /dev/null
+++ b/include/configs/RPXsuper.h
@@ -0,0 +1,505 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+
+/*****************************************************************************
+ *
+ * These settings must match the way _your_ board is set up
+ *
+ *****************************************************************************/
+/* for the AY-Revision which does not use the HRCW */
+#define CFG_DEFAULT_IMMR 0x00010000
+
+/* What is the oscillator's (UX2) frequency in Hz? */
+#define CONFIG_8260_CLKIN (66 * 1000 * 1000)
+
+/* How is switch S2 set? We really only want the MODCK[1-3] bits, so
+ * only the 3 least significant bits are important.
+*/
+#define CFG_SBC_S2 0x04
+
+/* What should MODCK_H be? It is dependent on the oscillator
+ * frequency, MODCK[1-3], and desired CPM and core frequencies.
+ * Some example values (all frequencies are in MHz):
+ *
+ * MODCK_H MODCK[1-3] Osc CPM Core
+ * 0x2 0x2 33 133 133
+ * 0x2 0x4 33 133 200
+ * 0x5 0x5 66 133 133
+ * 0x5 0x7 66 133 200
+ */
+#define CFG_SBC_MODCK_H 0x06
+
+#define CFG_SBC_BOOT_LOW 1 /* only for HRCW */
+#undef CFG_SBC_BOOT_LOW
+
+/* What should the base address of the main FLASH be and how big is
+ * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk
+ * The main FLASH is whichever is connected to *CS0. U-Boot expects
+ * this to be the SIMM.
+ */
+#define CFG_FLASH0_BASE 0x80000000
+#define CFG_FLASH0_SIZE 16
+
+/* What should the base address of the secondary FLASH be and how big
+ * is it (in Mbytes)? The secondary FLASH is whichever is connected
+ * to *CS6. U-Boot expects this to be the on board FLASH. If you don't
+ * want it enabled, don't define these constants.
+ */
+#define CFG_FLASH1_BASE 0
+#define CFG_FLASH1_SIZE 0
+#undef CFG_FLASH1_BASE
+#undef CFG_FLASH1_SIZE
+
+/* What should be the base address of SDRAM DIMM and how big is
+ * it (in Mbytes)?
+*/
+#define CFG_SDRAM0_BASE 0x00000000
+#define CFG_SDRAM0_SIZE 64
+
+/* What should be the base address of SDRAM DIMM and how big is
+ * it (in Mbytes)?
+*/
+#define CFG_SDRAM1_BASE 0x04000000
+#define CFG_SDRAM1_SIZE 32
+
+/* What should be the base address of the LEDs and switch S0?
+ * If you don't want them enabled, don't define this.
+ */
+#define CFG_LED_BASE 0x00000000
+
+/*
+ * select serial console configuration
+ *
+ * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ *
+ * if CONFIG_CONS_NONE is defined, then the serial console routines must
+ * defined elsewhere.
+ */
+#define CONFIG_CONS_ON_SMC /* define if console on SMC */
+#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
+#undef CONFIG_CONS_NONE /* define if console on neither */
+#define CONFIG_CONS_INDEX 1 /* which SMC/SCC channel for console */
+
+/*
+ * select ethernet configuration
+ *
+ * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC)
+ *
+ * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
+ * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ */
+#undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */
+#define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */
+#undef CONFIG_ETHER_NONE /* define if ethernet on neither */
+#define CONFIG_ETHER_INDEX 3 /* which SCC/FCC channel for ethernet */
+
+#if ( CONFIG_ETHER_INDEX == 3 )
+
+/*
+ * - Rx-CLK is CLK15
+ * - Tx-CLK is CLK16
+ * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
+ * - Enable Half Duplex in FSMR
+ */
+# define CFG_CMXFCR_MASK (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
+# define CFG_CMXFCR_VALUE (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CFG_CPMFCR_RAMTYPE 0
+/*#define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) */
+# define CFG_FCC_PSMR 0
+
+#else /* CONFIG_ETHER_INDEX */
+# error "on RPX Super ethernet must be FCC3"
+#endif /* CONFIG_ETHER_INDEX */
+
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+
+/* Define this to reserve an entire FLASH sector (256 KB) for
+ * environment variables. Otherwise, the environment will be
+ * put in the same sector as U-Boot, and changing variables
+ * will erase U-Boot temporarily
+ */
+#define CFG_ENV_IN_OWN_SECT
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* What should the console's baud rate be? */
+#define CONFIG_BAUDRATE 115200
+
+/* Ethernet MAC address */
+#define CONFIG_ETHADDR 08:00:22:50:70:63
+
+#define CONFIG_IPADDR 192.168.1.99
+#define CONFIG_SERVERIP 192.168.1.3
+
+/* Set to a positive value to delay for running BOOTCOMMAND */
+#define CONFIG_BOOTDELAY -1
+
+/* undef this to save memory */
+#define CFG_LONGHELP
+
+/* Monitor Command Prompt */
+#define CFG_PROMPT "=> "
+
+/* What U-Boot subsytems do you want enabled? */
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_IMMAP | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_I2C | \
+ CFG_CMD_REGINFO & \
+ ~CFG_CMD_KGDB )
+
+/* Where do the internal registers live? */
+#define CFG_IMMR 0xF0000000
+
+/* Where do the on board registers (CS4) live? */
+#define CFG_REGS_BASE 0xFA000000
+
+/*****************************************************************************
+ *
+ * You should not have to modify any of the following settings
+ *
+ *****************************************************************************/
+
+#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
+#define CONFIG_RPXSUPER 1 /* on an Embedded Planet RPX Super Board */
+
+#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
+
+#define CFG_MAXARGS 8 /* max number of command args */
+
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x04000000 /* memtest works on */
+#define CFG_MEMTEST_END 0x06000000 /* 64-96 MB in SDRAM */
+
+#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CFG_FLASH_BASE CFG_FLASH0_BASE
+#define CFG_SDRAM_BASE CFG_SDRAM0_BASE
+
+/*-----------------------------------------------------------------------
+ * Hard Reset Configuration Words
+ */
+#if defined(CFG_SBC_BOOT_LOW)
+# define CFG_SBC_HRCW_BOOT_FLAGS (HRCW_CIP | HRCW_BMS)
+#else
+# define CFG_SBC_HRCW_BOOT_FLAGS (0)
+#endif /* defined(CFG_SBC_BOOT_LOW) */
+
+/* get the HRCW ISB field from CFG_IMMR */
+#define CFG_SBC_HRCW_IMMR ( ((CFG_IMMR & 0x10000000) >> 10) |\
+ ((CFG_IMMR & 0x01000000) >> 7) |\
+ ((CFG_IMMR & 0x00100000) >> 4) )
+
+#define CFG_HRCW_MASTER (HRCW_BPS11 |\
+ HRCW_DPPC11 |\
+ CFG_SBC_HRCW_IMMR |\
+ HRCW_MMR00 |\
+ HRCW_LBPC11 |\
+ HRCW_APPC10 |\
+ HRCW_CS10PC00 |\
+ (CFG_SBC_MODCK_H & HRCW_MODCK_H1111) |\
+ CFG_SBC_HRCW_BOOT_FLAGS)
+
+/* no slaves */
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
+ */
+#define CFG_MONITOR_BASE (CFG_FLASH0_BASE + 0x00F00000)
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */
+
+#ifndef CFG_RAMBOOT
+# define CFG_ENV_IS_IN_FLASH 1
+
+# ifdef CFG_ENV_IN_OWN_SECT
+# define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+# define CFG_ENV_SECT_SIZE 0x40000
+# else
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_ENV_SECT_SIZE)
+# define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
+# define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sect real size */
+# endif /* CFG_ENV_IN_OWN_SECT */
+#else
+# define CFG_ENV_IS_IN_NVRAM 1
+# define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+# define CFG_ENV_SIZE 0x200
+#endif /* CFG_RAMBOOT */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * HIDx - Hardware Implementation-dependent Registers 2-11
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control - initially enable both caches and
+ * invalidate contents, then the final state leaves only the instruction
+ * cache enabled. Note that Power-On and Hard reset invalidate the caches,
+ * but Soft reset does not.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+#define CFG_HID0_INIT (/*HID0_ICE |*/\
+ /*HID0_DCE |*/\
+ HID0_ICFI |\
+ HID0_DCI |\
+ HID0_IFEM |\
+ HID0_ABE)
+
+#define CFG_HID0_FINAL (/*HID0_ICE |*/\
+ HID0_IFEM |\
+ HID0_ABE |\
+ HID0_EMCP)
+#define CFG_HID2 0
+
+/*-----------------------------------------------------------------------
+ * RMR - Reset Mode Register
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RMR 0
+
+/*-----------------------------------------------------------------------
+ * BCR - Bus Configuration 4-25
+ *-----------------------------------------------------------------------
+ */
+#define CFG_BCR (BCR_EBM |\
+ BCR_PLDP |\
+ BCR_EAV |\
+ BCR_NPQM0)
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration 4-31
+ *-----------------------------------------------------------------------
+ */
+
+#define CFG_SIUMCR (SIUMCR_L2CPC01 |\
+ SIUMCR_APPC10 |\
+ SIUMCR_CS10PC01)
+
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control 11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
+ */
+#define CFG_SYPCR (SYPCR_SWTC |\
+ SYPCR_BMT |\
+ SYPCR_PBME |\
+ SYPCR_LBME |\
+ SYPCR_SWRI |\
+ SYPCR_SWP)
+
+/*-----------------------------------------------------------------------
+ * TMCNTSC - Time Counter Status and Control 4-40
+ *-----------------------------------------------------------------------
+ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
+ * and enable Time Counter
+ */
+#define CFG_TMCNTSC (TMCNTSC_SEC |\
+ TMCNTSC_ALR |\
+ TMCNTSC_TCF |\
+ TMCNTSC_TCE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 4-42
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
+ * Periodic timer
+ */
+#define CFG_PISCR (PISCR_PS |\
+ PISCR_PTF |\
+ PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control 9-8
+ *-----------------------------------------------------------------------
+ */
+#define CFG_SCCR (SCCR_DFBRG01)
+
+/*-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration 13-7
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RCCR 0
+
+/*
+ * Init Memory Controller:
+ *
+ * Bank Bus Machine PortSz Device
+ * ---- --- ------- ------ ------
+ * 0 60x GPCM 64 bit FLASH (BGA - 16MB AMD AM29DL323DB90)
+ * 1 60x SDRAM 64 bit SDRAM (BGA - 64MB Hitachi HM5225325FBP-B60)
+ * 2 Local SDRAM 32 bit SDRAM (BGA - 32MB Hitachi HM5225325FBP-B60)
+ * 3 unused
+ * 4 60x GPCM 8 bit Board Regs, LEDs, switches
+ * 5 unused
+ * 6 unused
+ * 7 unused
+ * 8 PCMCIA
+ * 9 unused
+ * 10 unused
+ * 11 unused
+*/
+
+/* Bank 0 - FLASH
+ *
+ */
+#define CFG_BR0_PRELIM ((CFG_FLASH0_BASE & BRx_BA_MSK) |\
+ BRx_PS_64 |\
+ BRx_DECC_NONE |\
+ BRx_MS_GPCM_P |\
+ BRx_V)
+
+#define CFG_OR0_PRELIM (MEG_TO_AM(CFG_FLASH0_SIZE) |\
+ ORxG_CSNT |\
+ ORxG_ACS_DIV1 |\
+ ORxG_SCY_6_CLK |\
+ ORxG_EHTR)
+
+/* Bank 1 - SDRAM
+ *
+ */
+#define CFG_BR1_PRELIM ((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+ BRx_PS_64 |\
+ BRx_MS_SDRAM_P |\
+ BRx_V)
+
+#define CFG_OR1_PRELIM (MEG_TO_AM(CFG_SDRAM0_SIZE) |\
+ ORxS_BPD_4 |\
+ ORxS_ROWST_PBI0_A8 |\
+ ORxS_NUMR_12 |\
+ ORxS_IBID)
+
+#define CFG_PSDMR 0x014DA412
+#define CFG_PSRT 0x79
+
+
+/* Bank 2 - SDRAM
+ *
+ */
+#define CFG_BR2_PRELIM ((CFG_SDRAM1_BASE & BRx_BA_MSK) |\
+ BRx_PS_32 |\
+ BRx_MS_SDRAM_L |\
+ BRx_V)
+
+#define CFG_OR2_PRELIM (MEG_TO_AM(CFG_SDRAM1_SIZE) |\
+ ORxS_BPD_4 |\
+ ORxS_ROWST_PBI0_A9 |\
+ ORxS_NUMR_12)
+
+#define CFG_LSDMR 0x0169A512
+#define CFG_LSRT 0x79
+
+#define CFG_MPTPR (0x0800 & MPTPR_PTP_MSK)
+
+/* Bank 4 - On board registers
+ *
+ */
+#define CFG_BR4_PRELIM ((CFG_REGS_BASE & BRx_BA_MSK) |\
+ BRx_PS_8 |\
+ BRx_MS_GPCM_P |\
+ BRx_V)
+
+#define CFG_OR4_PRELIM (ORxG_AM_MSK |\
+ ORxG_CSNT |\
+ ORxG_ACS_DIV1 |\
+ ORxG_SCY_5_CLK |\
+ ORxG_TRLX)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
+
+