summaryrefslogtreecommitdiff
path: root/include/configs/ELPPC.h
diff options
context:
space:
mode:
authorwdenk <wdenk>2002-11-02 23:30:20 +0000
committerwdenk <wdenk>2002-11-02 23:30:20 +0000
commite221174377d7e3ee848e014b96430d4c97023e93 (patch)
treecfaa85f367bc58b8770b3dabf4e9fd64121127bf /include/configs/ELPPC.h
parent7ebf7443ad018a0647f549a835a55f0c08d7a15d (diff)
downloadu-boot-imx-e221174377d7e3ee848e014b96430d4c97023e93.zip
u-boot-imx-e221174377d7e3ee848e014b96430d4c97023e93.tar.gz
u-boot-imx-e221174377d7e3ee848e014b96430d4c97023e93.tar.bz2
Initial revision
Diffstat (limited to 'include/configs/ELPPC.h')
-rw-r--r--include/configs/ELPPC.h338
1 files changed, 338 insertions, 0 deletions
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
new file mode 100644
index 0000000..a3b1296
--- /dev/null
+++ b/include/configs/ELPPC.h
@@ -0,0 +1,338 @@
+/*
+ * (C) Copyright 2002 ELTEC Elektronik AG
+ * Frank Gottschling <fgottschling@eltec.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/processor.h>
+
+#undef DEBUG
+#define GTREGREAD(x) 0xffffffff /* needed for debug */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+/* these hardware addresses are pretty bogus, please change them to
+ suit your needs */
+
+/* first ethernet */
+#define CONFIG_ETHADDR 00:00:5b:ee:de:ad
+
+#define CONFIG_IPADDR 192.168.0.105
+#define CONFIG_SERVERIP 192.168.0.100
+
+#define CONFIG_ELPPC 1 /* this is an BAB740/BAB750 board */
+
+#define CONFIG_BAUDRATE 9600 /* console baudrate */
+
+#undef CONFIG_WATCHDOG
+
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND \
+ "bootp 1000000; " \
+ "setenv bootargs root=ramfs console=ttyS00,9600 " \
+ "ip=$(ipaddr):$(serverip):$(rootpath):$(gatewayip):" \
+ "$(netmask):$(hostname):eth0:none; " \
+ "bootm"
+
+#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
+#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+/*
+ * choose between COM1 and COM2 as serial console
+ */
+#define CONFIG_CONS_INDEX 1
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
+#define CFG_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x1000000 /* default load address */
+
+#define CFG_HZ 1000 /* dec. freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+#define CFG_BOARD_ASM_INIT
+#define CONFIG_MISC_INIT_R
+
+/*
+ * Address mapping scheme for the MPC107 mem controller is mapping B (CHRP)
+ */
+#undef CFG_ADDRESS_MAP_A
+
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x40000000
+
+#define CFG_PCI_MEM_BUS 0x80000000
+#define CFG_PCI_MEM_PHYS 0x80000000
+#define CFG_PCI_MEM_SIZE 0x7d000000
+
+#define CFG_ISA_MEM_BUS 0x00000000
+#define CFG_ISA_MEM_PHYS 0xfd000000
+#define CFG_ISA_MEM_SIZE 0x01000000
+
+#define CFG_PCI_IO_BUS 0x00800000
+#define CFG_PCI_IO_PHYS 0xfe800000
+#define CFG_PCI_IO_SIZE 0x00400000
+
+#define CFG_ISA_IO_BUS 0x00000000
+#define CFG_ISA_IO_PHYS 0xfe000000
+#define CFG_ISA_IO_SIZE 0x00800000
+
+/* driver defines FDC,IDE,... */
+#define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS
+#define CFG_ISA_IO CFG_ISA_IO_PHYS
+#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+
+#define CFG_USR_LED_BASE 0x78000000
+#define CFG_NVRAM_BASE 0xff000000
+#define CFG_UART_BASE 0xff400000
+#define CFG_FLASH_BASE 0xfff00000
+
+#define MPC107_EUMB_ADDR 0xfce00000
+#define MPC107_EUMB_PI 0xfce41090
+#define MPC107_EUMB_GCR 0xfce41020
+#define MPC107_EUMB_IACKR 0xfce600a0
+#define MPC107_I2C_ADDR 0xfce03000
+
+/*
+ * Definitions for initial stack pointer and data area
+ */
+#define CFG_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */
+#define CFG_INIT_RAM_END 0x4000
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for init data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*
+ * Flash mapping/organization on the MPC10x.
+ */
+#define FLASH_BASE0_PRELIM 0xff800000
+#define FLASH_BASE1_PRELIM 0xffc00000
+
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
+#define CFG_JFFS2_NUM_BANKS 2 /* ! second bank contains U-Boot */
+
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */
+#undef CFG_MEMTEST
+
+/*
+ * Environment settings
+ */
+#define CONFIG_ENV_OVERWRITE
+#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
+#define CFG_NVRAM_SIZE 0x800 /* NVRAM size (2kB) */
+#define CFG_ENV_SIZE 0x400 /* Size of Environment vars (1kB) */
+#define CFG_ENV_ADDR 0x0
+#define CFG_ENV_MAP_ADRS 0xff000000
+#define CFG_NV_SROM_COPY_ADDR (CFG_ENV_ADDR + CFG_ENV_SIZE)
+#define CFG_NVRAM_ACCESS_ROUTINE /* only byte accsess alowed */
+#define CFG_SROM_SIZE 0x100 /* shadow of revision info is in nvram */
+
+/*
+ * Serial devices
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK 24000000
+#define CFG_NS16550_COM1 (CFG_UART_BASE + 0)
+#define CFG_NS16550_COM2 (CFG_UART_BASE + 8)
+
+/*
+ * PCI stuff
+ */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* pci plug-and-play */
+#define CONFIG_PCI_HOST PCI_HOST_AUTO
+#undef CONFIG_PCI_SCAN_SHOW
+
+/*
+ * Optional Video console (graphic: SMI LynxEM)
+ */
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define VIDEO_KBD_INIT_FCT (simple_strtol (getenv("console"), NULL, 10))
+#define VIDEO_TSTC_FCT serial_tstc
+#define VIDEO_GETC_FCT serial_getc
+
+#define CONFIG_VIDEO_SMI_LYNXEM
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_CONSOLE_EXTRA_INFO
+
+/*
+ * Initial BATs
+ */
+#if 1
+
+#define CFG_IBAT0L 0
+#define CFG_IBAT0U 0
+#define CFG_DBAT0L CFG_IBAT1L
+#define CFG_DBAT0U CFG_IBAT1U
+
+#define CFG_IBAT1L 0
+#define CFG_IBAT1U 0
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+
+#define CFG_IBAT2L 0
+#define CFG_IBAT2U 0
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+
+#define CFG_IBAT3L 0
+#define CFG_IBAT3U 0
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+#else
+
+/* SDRAM */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_RW)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L CFG_IBAT1L
+#define CFG_DBAT0U CFG_IBAT1U
+
+/* address range for flashes */
+#define CFG_IBAT1L (CFG_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT1U (CFG_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+
+/* ISA IO space */
+#define CFG_IBAT2L (CFG_ISA_IO | BATL_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (CFG_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+
+/* ISA memory space */
+#define CFG_IBAT3L (CFG_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (CFG_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+#endif
+
+/*
+ * Speed settings are board specific
+ */
+#define CFG_BUS_HZ 100000000
+#define CFG_CPU_CLK 400000000
+#define CFG_BUS_CLK CFG_BUS_HZ
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * L2CR setup -- make sure this is right for your board!
+ * look in include/mpc74xx.h for the defines used here
+ */
+
+#define CFG_L2
+
+#if 1
+#define L2_INIT 0 /* cpu 750 CXe*/
+#else
+#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
+ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
+#endif
+#define L2_ENABLE (L2_INIT | L2CR_L2E)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+#define CONFIG_EEPRO100
+#define CONFIG_EEPRO100_SROM_WRITE
+
+#endif /* __CONFIG_H */