Merge branch 'master' of git://git.denx.de/u-boot-arm

11 files changed, 748 insertions, 17 deletions

diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 3f6ad5c..64dcf4e 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -25,15 +25,16 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libblock.a
 
+COBJS-$(CONFIG_SCSI_AHCI) += ahci.o
 COBJS-$(CONFIG_ATA_PIIX) += ata_piix.o
-COBJS-$(CONFIG_CMD_MG_DISK) += mg_disk.o
 COBJS-$(CONFIG_FSL_SATA) += fsl_sata.o
-COBJS-$(CONFIG_IDE_SIL680) += sil680.o
 COBJS-$(CONFIG_LIBATA) += libata.o
+COBJS-$(CONFIG_CMD_MG_DISK) += mg_disk.o
+COBJS-$(CONFIG_MVSATA_IDE) += mvsata_ide.o
 COBJS-$(CONFIG_PATA_BFIN) += pata_bfin.o
 COBJS-$(CONFIG_SATA_DWC) += sata_dwc.o
 COBJS-$(CONFIG_SATA_SIL3114) += sata_sil3114.o
-COBJS-$(CONFIG_SCSI_AHCI) += ahci.o
+COBJS-$(CONFIG_IDE_SIL680) += sil680.o
 COBJS-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o
 COBJS-$(CONFIG_SYSTEMACE) += systemace.o
 
diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c
new file mode 100644
index 0000000..077b278
--- /dev/null
+++ b/drivers/block/mvsata_ide.c
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr>
+ *
+ * Written-by: Albert ARIBAUD <albert.aribaud@free.fr>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_ORION5X)
+#include <asm/arch/orion5x.h>
+#elif defined(CONFIG_KIRKWOOD)
+#include <asm/arch/kirkwood.h>
+#endif
+
+/* SATA port registers */
+struct mvsata_port_registers {
+	u32 reserved1[192];
+	/* offset 0x300 : ATA Interface registers */
+	u32 sstatus;
+	u32 serror;
+	u32 scontrol;
+	u32 ltmode;
+	u32 phymode3;
+	u32 phymode4;
+	u32 reserved2[5];
+	u32 phymode1;
+	u32 phymode2;
+	u32 bist_cr;
+	u32 bist_dw1;
+	u32 bist_dw2;
+	u32 serrorintrmask;
+};
+
+/*
+ * Sanity checks:
+ * - to compile at all, we need CONFIG_SYS_ATA_BASE_ADDR.
+ * - for ide_preinit to make sense, we need at least one of
+ *   CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE0_OFFSET;
+ * - for inde_preinit to be called, we need CONFIG_IDE_PREINIT.
+ * Fail with an explanation message if these conditions are not met.
+ * This is particularly important for CONFIG_IDE_PREINIT, because
+ * its lack would not cause a build error.
+ */
+
+#if !defined(CONFIG_SYS_ATA_BASE_ADDR)
+#error CONFIG_SYS_ATA_BASE_ADDR must be defined
+#elif !defined(CONFIG_SYS_ATA_IDE0_OFFSET) \
+   && !defined(CONFIG_SYS_ATA_IDE1_OFFSET)
+#error CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET \
+   must be defined
+#elif !defined(CONFIG_IDE_PREINIT)
+#error CONFIG_IDE_PREINIT must be defined
+#endif
+
+/*
+ * Masks and values for SControl DETection and Interface Power Management,
+ * and for SStatus DETection.
+ */
+
+#define MVSATA_SCONTROL_DET_MASK		0x0000000F
+#define MVSATA_SCONTROL_DET_NONE		0x00000000
+#define MVSATA_SCONTROL_DET_INIT		0x00000001
+#define MVSATA_SCONTROL_IPM_MASK		0x00000F00
+#define MVSATA_SCONTROL_IPM_NO_LP_ALLOWED	0x00000300
+#define MVSATA_SCONTROL_MASK \
+	(MVSATA_SCONTROL_DET_MASK|MVSATA_SCONTROL_IPM_MASK)
+#define MVSATA_PORT_INIT \
+	(MVSATA_SCONTROL_DET_INIT|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED)
+#define MVSATA_PORT_USE \
+	(MVSATA_SCONTROL_DET_NONE|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED)
+#define MVSATA_SSTATUS_DET_MASK			0x0000000F
+#define MVSATA_SSTATUS_DET_DEVCOMM		0x00000003
+
+/*
+ * Initialize one MVSATAHC port: set SControl's IPM to "always active"
+ * and DET to "reset", then wait for SStatus's DET to become "device and
+ * comm ok" (or time out after 50 us if no device), then set SControl's
+ * DET back to "no action".
+ */
+
+static void mvsata_ide_initialize_port(struct mvsata_port_registers *port)
+{
+	u32 control;
+	u32 status;
+	u32 tout = 50; /* wait at most 50 us for SATA reset to complete */
+
+	control = readl(&port->scontrol);
+	control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_INIT;
+	writel(control, &port->scontrol);
+	while (--tout) {
+		status = readl(&port->sstatus) & MVSATA_SSTATUS_DET_MASK;
+		if (status == MVSATA_SSTATUS_DET_DEVCOMM)
+			break;
+		udelay(1);
+	}
+	control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_USE;
+	writel(control, &port->scontrol);
+}
+
+/*
+ * ide_preinit() will be called by ide_init in cmd_ide.c and will
+ * reset the MVSTATHC ports needed by the board.
+ */
+
+int ide_preinit(void)
+{
+	/* Enable ATA port 0 (could be SATA port 0 or 1) if declared */
+#if defined(CONFIG_SYS_ATA_IDE0_OFFSET)
+	mvsata_ide_initialize_port(
+		(struct mvsata_port_registers *)
+		(CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET));
+#endif
+	/* Enable ATA port 1 (could be SATA port 0 or 1) if declared */
+#if defined(CONFIG_SYS_ATA_IDE1_OFFSET)
+	mvsata_ide_initialize_port(
+		(struct mvsata_port_registers *)
+		(CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE1_OFFSET));
+#endif
+	/* return 0 as we always succeed */
+	return 0;
+}
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 3256133..7c98f15 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -27,6 +27,8 @@
 
 #include "omap24xx_i2c.h"
 
+#define I2C_TIMEOUT	10
+
 static void wait_for_bb (void);
 static u16 wait_for_pin (void);
 static void flush_fifo(void);
@@ -41,6 +43,7 @@ void i2c_init (int speed, int slaveadd)
 	int psc, fsscll, fssclh;
 	int hsscll = 0, hssclh = 0;
 	u32 scll, sclh;
+	int timeout = I2C_TIMEOUT;
 
 	/* Only handle standard, fast and high speeds */
 	if ((speed != OMAP_I2C_STANDARD) &&
@@ -102,15 +105,24 @@ void i2c_init (int speed, int slaveadd)
 		sclh = (unsigned int)fssclh;
 	}
 
-	writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */
-	udelay(1000);
-	writew(0x0, &i2c_base->sysc); /* will probably self clear but */
-
 	if (readw (&i2c_base->con) & I2C_CON_EN) {
 		writew (0, &i2c_base->con);
 		udelay (50000);
 	}
 
+	writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */
+	udelay(1000);
+
+	writew(I2C_CON_EN, &i2c_base->con);
+	while (!(readw(&i2c_base->syss) & I2C_SYSS_RDONE) && timeout--) {
+		if (timeout <= 0) {
+			printf("ERROR: Timeout in soft-reset\n");
+			return;
+		}
+		udelay(1000);
+	}
+
+	writew(0, &i2c_base->con);
 	writew(psc, &i2c_base->psc);
 	writew(scll, &i2c_base->scll);
 	writew(sclh, &i2c_base->sclh);
@@ -159,15 +171,14 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
 	}
 
 	if (!i2c_error) {
-		/* free bus, otherwise we can't use a combined transction */
-		writew (0, &i2c_base->con);
-		while (readw (&i2c_base->stat) || (readw (&i2c_base->con) & I2C_CON_MST)) {
+		writew (I2C_CON_EN, &i2c_base->con);
+		while (readw(&i2c_base->stat) &
+			(I2C_STAT_XRDY | I2C_STAT_ARDY)) {
 			udelay (10000);
 			/* Have to clear pending interrupt to clear I2C_STAT */
 			writew (0xFFFF, &i2c_base->stat);
 		}
 
-		wait_for_bb ();
 		/* set slave address */
 		writew (devaddr, &i2c_base->sa);
 		/* read one byte from slave */
@@ -191,8 +202,8 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
 
 		if (!i2c_error) {
 			writew (I2C_CON_EN, &i2c_base->con);
-			while (readw (&i2c_base->stat)
-			       || (readw (&i2c_base->con) & I2C_CON_MST)) {
+			while (readw (&i2c_base->stat) &
+				(I2C_STAT_RRDY | I2C_STAT_ARDY)) {
 				udelay (10000);
 				writew (0xFFFF, &i2c_base->stat);
 			}
diff --git a/drivers/i2c/omap24xx_i2c.h b/drivers/i2c/omap24xx_i2c.h
index 92a3416..650e33a 100644
--- a/drivers/i2c/omap24xx_i2c.h
+++ b/drivers/i2c/omap24xx_i2c.h
@@ -85,6 +85,10 @@
 #define I2C_SYSTEST_SDA_I	(1 << 1)  /* SDA line sense input value */
 #define I2C_SYSTEST_SDA_O	(1 << 0)  /* SDA line drive output value */
 
+/* I2C System Status Register (I2C_SYSS): */
+
+#define I2C_SYSS_RDONE          (1 << 0)  /* Internel reset monitoring */
+
 #define I2C_SCLL_SCLL		0
 #define I2C_SCLL_SCLL_M		0xFF
 #define I2C_SCLL_HSSCLL		8
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 6fa04b8..8dfd8a3 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -32,6 +32,7 @@ COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o
 COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
 COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o
 COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o
+COBJS-$(CONFIG_S5P_MMC) += s5p_mmc.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/mmc/s5p_mmc.c b/drivers/mmc/s5p_mmc.c
new file mode 100644
index 0000000..669b1d0
--- /dev/null
+++ b/drivers/mmc/s5p_mmc.c
@@ -0,0 +1,478 @@
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <asm/io.h>
+#include <asm/arch/mmc.h>
+
+#ifdef DEBUG_S5P_HSMMC
+#define dbg(x...)       printf(x)
+#else
+#define dbg(x...)       do { } while (0)
+#endif
+
+/* support 4 mmc hosts */
+struct mmc mmc_dev[4];
+struct mmc_host mmc_host[4];
+
+static inline struct s5p_mmc *s5p_get_base_mmc(int dev_index)
+{
+	unsigned long offset = dev_index * sizeof(struct s5p_mmc);
+
+	if (cpu_is_s5pc100())
+		return (struct s5p_mmc *)(S5PC100_MMC_BASE + offset);
+	else
+		return (struct s5p_mmc *)(S5PC110_MMC_BASE + offset);
+}
+
+static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
+{
+	unsigned char ctrl;
+
+	dbg("data->dest: %08x\n", (u32)data->dest);
+	writel((u32)data->dest, &host->reg->sysad);
+	/*
+	 * DMASEL[4:3]
+	 * 00 = Selects SDMA
+	 * 01 = Reserved
+	 * 10 = Selects 32-bit Address ADMA2
+	 * 11 = Selects 64-bit Address ADMA2
+	 */
+	ctrl = readb(&host->reg->hostctl);
+	ctrl &= ~(3 << 3);
+	writeb(ctrl, &host->reg->hostctl);
+
+	/* We do not handle DMA boundaries, so set it to max (512 KiB) */
+	writew((7 << 12) | (512 << 0), &host->reg->blksize);
+	writew(data->blocks, &host->reg->blkcnt);
+}
+
+static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data)
+{
+	unsigned short mode;
+
+	/*
+	 * TRNMOD
+	 * MUL1SIN0[5]	: Multi/Single Block Select
+	 * RD1WT0[4]	: Data Transfer Direction Select
+	 *	1 = read
+	 *	0 = write
+	 * ENACMD12[2]	: Auto CMD12 Enable
+	 * ENBLKCNT[1]	: Block Count Enable
+	 * ENDMA[0]	: DMA Enable
+	 */
+	mode = (1 << 1) | (1 << 0);
+	if (data->blocks > 1)
+		mode |= (1 << 5);
+	if (data->flags & MMC_DATA_READ)
+		mode |= (1 << 4);
+
+	writew(mode, &host->reg->trnmod);
+}
+
+static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+			struct mmc_data *data)
+{
+	struct mmc_host *host = (struct mmc_host *)mmc->priv;
+	int flags, i;
+	unsigned int timeout;
+	unsigned int mask;
+	unsigned int retry = 0x100000;
+
+	/* Wait max 10 ms */
+	timeout = 10;
+
+	/*
+	 * PRNSTS
+	 * CMDINHDAT[1]	: Command Inhibit (DAT)
+	 * CMDINHCMD[0]	: Command Inhibit (CMD)
+	 */
+	mask = (1 << 0);
+	if ((data != NULL) || (cmd->resp_type & MMC_RSP_BUSY))
+		mask |= (1 << 1);
+
+	/*
+	 * We shouldn't wait for data inihibit for stop commands, even
+	 * though they might use busy signaling
+	 */
+	if (data)
+		mask &= ~(1 << 1);
+
+	while (readl(&host->reg->prnsts) & mask) {
+		if (timeout == 0) {
+			printf("%s: timeout error\n", __func__);
+			return -1;
+		}
+		timeout--;
+		udelay(1000);
+	}
+
+	if (data)
+		mmc_prepare_data(host, data);
+
+	dbg("cmd->arg: %08x\n", cmd->cmdarg);
+	writel(cmd->cmdarg, &host->reg->argument);
+
+	if (data)
+		mmc_set_transfer_mode(host, data);
+
+	if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
+		return -1;
+
+	/*
+	 * CMDREG
+	 * CMDIDX[13:8]	: Command index
+	 * DATAPRNT[5]	: Data Present Select
+	 * ENCMDIDX[4]	: Command Index Check Enable
+	 * ENCMDCRC[3]	: Command CRC Check Enable
+	 * RSPTYP[1:0]
+	 *	00 = No Response
+	 *	01 = Length 136
+	 *	10 = Length 48
+	 *	11 = Length 48 Check busy after response
+	 */
+	if (!(cmd->resp_type & MMC_RSP_PRESENT))
+		flags = 0;
+	else if (cmd->resp_type & MMC_RSP_136)
+		flags = (1 << 0);
+	else if (cmd->resp_type & MMC_RSP_BUSY)
+		flags = (3 << 0);
+	else
+		flags = (2 << 0);
+
+	if (cmd->resp_type & MMC_RSP_CRC)
+		flags |= (1 << 3);
+	if (cmd->resp_type & MMC_RSP_OPCODE)
+		flags |= (1 << 4);
+	if (data)
+		flags |= (1 << 5);
+
+	dbg("cmd: %d\n", cmd->cmdidx);
+
+	writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg);
+
+	for (i = 0; i < retry; i++) {
+		mask = readl(&host->reg->norintsts);
+		/* Command Complete */
+		if (mask & (1 << 0)) {
+			if (!data)
+				writel(mask, &host->reg->norintsts);
+			break;
+		}
+	}
+
+	if (i == retry) {
+		printf("%s: waiting for status update\n", __func__);
+		return TIMEOUT;
+	}
+
+	if (mask & (1 << 16)) {
+		/* Timeout Error */
+		dbg("timeout: %08x cmd %d\n", mask, cmd->cmdidx);
+		return TIMEOUT;
+	} else if (mask & (1 << 15)) {
+		/* Error Interrupt */
+		dbg("error: %08x cmd %d\n", mask, cmd->cmdidx);
+		return -1;
+	}
+
+	if (cmd->resp_type & MMC_RSP_PRESENT) {
+		if (cmd->resp_type & MMC_RSP_136) {
+			/* CRC is stripped so we need to do some shifting. */
+			for (i = 0; i < 4; i++) {
+				unsigned int offset =
+					(unsigned int)(&host->reg->rspreg3 - i);
+				cmd->response[i] = readl(offset) << 8;
+
+				if (i != 3) {
+					cmd->response[i] |=
+						readb(offset - 1);
+				}
+				dbg("cmd->resp[%d]: %08x\n",
+						i, cmd->response[i]);
+			}
+		} else if (cmd->resp_type & MMC_RSP_BUSY) {
+			for (i = 0; i < retry; i++) {
+				/* PRNTDATA[23:20] : DAT[3:0] Line Signal */
+				if (readl(&host->reg->prnsts)
+					& (1 << 20))	/* DAT[0] */
+					break;
+			}
+
+			if (i == retry) {
+				printf("%s: card is still busy\n", __func__);
+				return TIMEOUT;
+			}
+
+			cmd->response[0] = readl(&host->reg->rspreg0);
+			dbg("cmd->resp[0]: %08x\n", cmd->response[0]);
+		} else {
+			cmd->response[0] = readl(&host->reg->rspreg0);
+			dbg("cmd->resp[0]: %08x\n", cmd->response[0]);
+		}
+	}
+
+	if (data) {
+		while (1) {
+			mask = readl(&host->reg->norintsts);
+
+			if (mask & (1 << 15)) {
+				/* Error Interrupt */
+				writel(mask, &host->reg->norintsts);
+				printf("%s: error during transfer: 0x%08x\n",
+						__func__, mask);
+				return -1;
+			} else if (mask & (1 << 3)) {
+				/* DMA Interrupt */
+				dbg("DMA end\n");
+				break;
+			} else if (mask & (1 << 1)) {
+				/* Transfer Complete */
+				dbg("r/w is done\n");
+				break;
+			}
+		}
+		writel(mask, &host->reg->norintsts);
+	}
+
+	udelay(1000);
+	return 0;
+}
+
+static void mmc_change_clock(struct mmc_host *host, uint clock)
+{
+	int div;
+	unsigned short clk;
+	unsigned long timeout;
+	unsigned long ctrl2;
+
+	/*
+	 * SELBASECLK[5:4]
+	 * 00/01 = HCLK
+	 * 10 = EPLL
+	 * 11 = XTI or XEXTCLK
+	 */
+	ctrl2 = readl(&host->reg->control2);
+	ctrl2 &= ~(3 << 4);
+	ctrl2 |= (2 << 4);
+	writel(ctrl2, &host->reg->control2);
+
+	writew(0, &host->reg->clkcon);
+
+	/* XXX: we assume that clock is between 40MHz and 50MHz */
+	if (clock == 0)
+		goto out;
+	else if (clock <= 400000)
+		div = 0x100;
+	else if (clock <= 20000000)
+		div = 4;
+	else if (clock <= 26000000)
+		div = 2;
+	else
+		div = 1;
+	dbg("div: %d\n", div);
+
+	div >>= 1;
+	/*
+	 * CLKCON
+	 * SELFREQ[15:8]	: base clock divied by value
+	 * ENSDCLK[2]		: SD Clock Enable
+	 * STBLINTCLK[1]	: Internal Clock Stable
+	 * ENINTCLK[0]		: Internal Clock Enable
+	 */
+	clk = (div << 8) | (1 << 0);
+	writew(clk, &host->reg->clkcon);
+
+	/* Wait max 10 ms */
+	timeout = 10;
+	while (!(readw(&host->reg->clkcon) & (1 << 1))) {
+		if (timeout == 0) {
+			printf("%s: timeout error\n", __func__);
+			return;
+		}
+		timeout--;
+		udelay(1000);
+	}
+
+	clk |= (1 << 2);
+	writew(clk, &host->reg->clkcon);
+
+out:
+	host->clock = clock;
+}
+
+static void mmc_set_ios(struct mmc *mmc)
+{
+	struct mmc_host *host = mmc->priv;
+	unsigned char ctrl;
+	unsigned long val;
+
+	dbg("set_ios: bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
+
+	/*
+	 * SELCLKPADDS[17:16]
+	 * 00 = 2mA
+	 * 01 = 4mA
+	 * 10 = 7mA
+	 * 11 = 9mA
+	 */
+	writel(0x3 << 16, &host->reg->control4);
+
+	val = readl(&host->reg->control2);
+	val &= (0x3 << 4);
+
+	val |=	(1 << 31) |	/* write status clear async mode enable */
+		(1 << 30) |	/* command conflict mask enable */
+		(1 << 14) |	/* Feedback Clock Enable for Rx Clock */
+		(1 << 8);	/* SDCLK hold enable */
+
+	writel(val, &host->reg->control2);
+
+	/*
+	 * FCSEL1[15] FCSEL0[7]
+	 * FCSel[1:0] : Rx Feedback Clock Delay Control
+	 *	Inverter delay means10ns delay if SDCLK 50MHz setting
+	 *	01 = Delay1 (basic delay)
+	 *	11 = Delay2 (basic delay + 2ns)
+	 *	00 = Delay3 (inverter delay)
+	 *	10 = Delay4 (inverter delay + 2ns)
+	 */
+	writel(0x8080, &host->reg->control3);
+
+	mmc_change_clock(host, mmc->clock);
+
+	ctrl = readb(&host->reg->hostctl);
+
+	/*
+	 * WIDE4[1]
+	 * 1 = 4-bit mode
+	 * 0 = 1-bit mode
+	 */
+	if (mmc->bus_width == 4)
+		ctrl |= (1 << 1);
+	else
+		ctrl &= ~(1 << 1);
+
+	/*
+	 * OUTEDGEINV[2]
+	 * 1 = Riging edge output
+	 * 0 = Falling edge output
+	 */
+	ctrl &= ~(1 << 2);
+
+	writeb(ctrl, &host->reg->hostctl);
+}
+
+static void mmc_reset(struct mmc_host *host)
+{
+	unsigned int timeout;
+
+	/*
+	 * RSTALL[0] : Software reset for all
+	 * 1 = reset
+	 * 0 = work
+	 */
+	writeb((1 << 0), &host->reg->swrst);
+
+	host->clock = 0;
+
+	/* Wait max 100 ms */
+	timeout = 100;
+
+	/* hw clears the bit when it's done */
+	while (readb(&host->reg->swrst) & (1 << 0)) {
+		if (timeout == 0) {
+			printf("%s: timeout error\n", __func__);
+			return;
+		}
+		timeout--;
+		udelay(1000);
+	}
+}
+
+static int mmc_core_init(struct mmc *mmc)
+{
+	struct mmc_host *host = (struct mmc_host *)mmc->priv;
+	unsigned int mask;
+
+	mmc_reset(host);
+
+	host->version = readw(&host->reg->hcver);
+
+	/* mask all */
+	writel(0xffffffff, &host->reg->norintstsen);
+	writel(0xffffffff, &host->reg->norintsigen);
+
+	writeb(0xe, &host->reg->timeoutcon);	/* TMCLK * 2^27 */
+
+	/*
+	 * NORMAL Interrupt Status Enable Register init
+	 * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable
+	 * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable
+	 * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable
+	 * [0] ENSTACMDCMPLT : Command Complete Status Enable
+	*/
+	mask = readl(&host->reg->norintstsen);
+	mask &= ~(0xffff);
+	mask |= (1 << 5) | (1 << 4) | (1 << 1) | (1 << 0);
+	writel(mask, &host->reg->norintstsen);
+
+	/*
+	 * NORMAL Interrupt Signal Enable Register init
+	 * [1] ENSTACMDCMPLT : Transfer Complete Signal Enable
+	 */
+	mask = readl(&host->reg->norintsigen);
+	mask &= ~(0xffff);
+	mask |= (1 << 1);
+	writel(mask, &host->reg->norintsigen);
+
+	return 0;
+}
+
+static int s5p_mmc_initialize(int dev_index)
+{
+	struct mmc *mmc;
+
+	mmc = &mmc_dev[dev_index];
+
+	sprintf(mmc->name, "SAMSUNG SD/MMC");
+	mmc->priv = &mmc_host[dev_index];
+	mmc->send_cmd = mmc_send_cmd;
+	mmc->set_ios = mmc_set_ios;
+	mmc->init = mmc_core_init;
+
+	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+	mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS;
+
+	mmc->f_min = 400000;
+	mmc->f_max = 52000000;
+
+	mmc_host[dev_index].clock = 0;
+	mmc_host[dev_index].reg = s5p_get_base_mmc(dev_index);
+	mmc_register(mmc);
+
+	return 0;
+}
+
+int s5p_mmc_init(int dev_index)
+{
+	return s5p_mmc_initialize(dev_index);
+}
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index dd06514..db53173 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
 LIB 	:= $(obj)libpower.a
 
 COBJS-$(CONFIG_TWL4030_POWER)	+= twl4030.o
+COBJS-$(CONFIG_TWL6030_POWER)	+= twl6030.o
 
 COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c
new file mode 100644
index 0000000..cf1da6b
--- /dev/null
+++ b/drivers/power/twl6030.c
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#ifdef CONFIG_TWL6030_POWER
+
+#include <twl6030.h>
+
+/* Functions to read and write from TWL6030 */
+static inline int twl6030_i2c_write_u8(u8 chip_no, u8 val, u8 reg)
+{
+	return i2c_write(chip_no, reg, 1, &val, 1);
+}
+
+static inline int twl6030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
+{
+	return i2c_read(chip_no, reg, 1, val, 1);
+}
+
+void twl6030_start_usb_charging(void)
+{
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VICHRG_1500,
+							CHARGERUSB_VICHRG);
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CIN_LIMIT_NONE,
+							CHARGERUSB_CINLIMIT);
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MBAT_TEMP,
+							CONTROLLER_INT_MASK);
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MASK_MCHARGERUSB_THMREG,
+							CHARGERUSB_INT_MASK);
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VOREG_4P0,
+							CHARGERUSB_VOREG);
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL2_VITERM_100,
+							CHARGERUSB_CTRL2);
+	/* Enable USB charging */
+	twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1_EN_CHARGER,
+							CONTROLLER_CTRL1);
+	return;
+}
+
+void twl6030_init_battery_charging(void)
+{
+	twl6030_start_usb_charging();
+	return;
+}
+
+void twl6030_usb_device_settings()
+{
+	u8 data = 0;
+
+	/* Select APP Group and set state to ON */
+	twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VUSB_CFG_STATE);
+
+	twl6030_i2c_read_u8(TWL6030_CHIP_PM, &data, MISC2);
+	data |= 0x10;
+
+	/* Select the input supply for VBUS regulator */
+	twl6030_i2c_write_u8(TWL6030_CHIP_PM, data, MISC2);
+}
+#endif
diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
index 9747db3..e0d4e80 100644
--- a/drivers/serial/serial_s5p.c
+++ b/drivers/serial/serial_s5p.c
@@ -133,7 +133,7 @@ int serial_getc_dev(const int dev_index)
 			return 0;
 	}
 
-	return (int)(readl(&uart->urxh) & 0xff);
+	return (int)(readb(&uart->urxh) & 0xff);
 }
 
 /*
@@ -149,7 +149,7 @@ void serial_putc_dev(const char c, const int dev_index)
 			return;
 	}
 
-	writel(c, &uart->utxh);
+	writeb(c, &uart->utxh);
 
 	/* If \n, also do \r */
 	if (c == '\n')
diff --git a/drivers/usb/musb/omap3.c b/drivers/usb/musb/omap3.c
index a983552..c7876ed 100644
--- a/drivers/usb/musb/omap3.c
+++ b/drivers/usb/musb/omap3.c
@@ -31,6 +31,7 @@
  */
 
 #include <twl4030.h>
+#include <twl6030.h>
 #include "omap3.h"
 
 static int platform_needs_initialization = 1;
@@ -65,7 +66,12 @@ static struct omap3_otg_regs *otg;
 
 #define OMAP3_OTG_SYSSTATUS_RESETDONE			0x0001
 
+/* OMAP4430 has an internal PHY, use it */
+#ifdef CONFIG_OMAP4430
+#define OMAP3_OTG_INTERFSEL_OMAP			0x0000
+#else
 #define OMAP3_OTG_INTERFSEL_OMAP			0x0001
+#endif
 
 #define OMAP3_OTG_FORCESTDBY_STANDBY			0x0001
 
@@ -105,6 +111,11 @@ int musb_platform_init(void)
 			goto end;
 		}
 #endif
+
+#ifdef CONFIG_TWL6030_POWER
+		twl6030_usb_device_settings();
+#endif
+
 		otg = (struct omap3_otg_regs *)OMAP3_OTG_BASE;
 
 		/* Set OTG to always be on */
@@ -122,6 +133,11 @@ int musb_platform_init(void)
 #ifdef CONFIG_OMAP3_EVM
 		musb_cfg.extvbus = omap3_evm_need_extvbus();
 #endif
+
+#ifdef CONFIG_OMAP4430
+		u32 *usbotghs_control = (u32 *)(CTRL_BASE + 0x33C);
+		*usbotghs_control = 0x15;
+#endif
 		platform_needs_initialization = 0;
 	}
 
diff --git a/drivers/usb/musb/omap3.h b/drivers/usb/musb/omap3.h
index c934e0c..b2acdf4 100644
--- a/drivers/usb/musb/omap3.h
+++ b/drivers/usb/musb/omap3.h
@@ -31,10 +31,11 @@
 #ifndef _MUSB_OMAP3_H_
 #define _MUSB_OMAP3_H_
 
+#include <asm/arch/cpu.h>
 #include "musb_core.h"
 
 /* Base address of MUSB registers */
-#define MENTOR_USB0_BASE (OMAP34XX_CORE_L4_IO_BASE + 0xAB000)
+#define MENTOR_USB0_BASE MUSB_BASE
 
 /* Base address of OTG registers */
 #define OMAP3_OTG_BASE (MENTOR_USB0_BASE + 0x400)
@@ -45,7 +46,7 @@
 int musb_platform_init(void);
 
 #ifdef CONFIG_OMAP3_EVM
-extern u8 omap3_evm_use_extvbus(void);
+extern u8 omap3_evm_need_extvbus(void);
 #endif
 
 #endif /* _MUSB_OMAP3_H */