diff options
| author | Lokesh Vutla <lokeshvutla@ti.com> | 2016-11-23 13:25:28 +0530 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2016-12-04 13:54:51 -0500 |
| commit | b4b060066f158a461780dfb06a042bb6351a2b3c (patch) | |
| tree | 702244a6706fefa39a458eac01d9377217c74eb0 /drivers | |
| parent | f56e63509985d23e8912beaf3c38b07f7a1b12c6 (diff) | |
| download | u-boot-imx-b4b060066f158a461780dfb06a042bb6351a2b3c.zip u-boot-imx-b4b060066f158a461780dfb06a042bb6351a2b3c.tar.gz u-boot-imx-b4b060066f158a461780dfb06a042bb6351a2b3c.tar.bz2 | |
ARM: OMAP4+: Add support for getting pbias info from board
Palmas driver assumes it is always TPS659xx regulator on all DRA7xx based
boards to enable mmc regulator. This is not true always like in case of
DRA71x-evm. So get this information based on the board.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Delete omap4_vmmc_pbias_config from omap_hsmmc.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mmc/omap_hsmmc.c | 47 | ||||
| -rw-r--r-- | drivers/power/palmas.c | 21 |
2 files changed, 22 insertions, 46 deletions
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 020db98..0a1ee40 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -96,44 +96,6 @@ static int omap_mmc_setup_gpio_in(int gpio, const char *label) } #endif -#if defined(CONFIG_OMAP44XX) -static void omap4_vmmc_pbias_config(struct mmc *mmc) -{ - u32 value = 0; - - value = readl((*ctrl)->control_pbiaslite); - value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ); - writel(value, (*ctrl)->control_pbiaslite); - value = readl((*ctrl)->control_pbiaslite); - value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ; - writel(value, (*ctrl)->control_pbiaslite); -} -#endif - -#if defined(CONFIG_OMAP54XX) && defined(CONFIG_PALMAS_POWER) -static void omap5_pbias_config(struct mmc *mmc) -{ - u32 value = 0; - - value = readl((*ctrl)->control_pbias); - value &= ~SDCARD_PWRDNZ; - writel(value, (*ctrl)->control_pbias); - udelay(10); /* wait 10 us */ - value &= ~SDCARD_BIAS_PWRDNZ; - writel(value, (*ctrl)->control_pbias); - - palmas_mmc1_poweron_ldo(); - - value = readl((*ctrl)->control_pbias); - value |= SDCARD_BIAS_PWRDNZ; - writel(value, (*ctrl)->control_pbias); - udelay(150); /* wait 150 us */ - value |= SDCARD_PWRDNZ; - writel(value, (*ctrl)->control_pbias); - udelay(150); /* wait 150 us */ -} -#endif - static unsigned char mmc_board_init(struct mmc *mmc) { #if defined(CONFIG_OMAP34XX) @@ -173,14 +135,10 @@ static unsigned char mmc_board_init(struct mmc *mmc) &prcm_base->iclken1_core); #endif -#if defined(CONFIG_OMAP44XX) +#if defined(CONFIG_OMAP54XX) || defined(CONFIG_OMAP44XX) /* PBIAS config needed for MMC1 only */ if (mmc->block_dev.devnum == 0) - omap4_vmmc_pbias_config(mmc); -#endif -#if defined(CONFIG_OMAP54XX) && defined(CONFIG_PALMAS_POWER) - if (mmc->block_dev.devnum == 0) - omap5_pbias_config(mmc); + vmmc_pbias_config(LDO_VOLT_3V0); #endif return 0; @@ -214,7 +172,6 @@ void mmc_init_stream(struct hsmmc *mmc_base) writel(readl(&mmc_base->con) & ~INIT_INITSTREAM, &mmc_base->con); } - static int omap_hsmmc_init_setup(struct mmc *mmc) { struct hsmmc *mmc_base; diff --git a/drivers/power/palmas.c b/drivers/power/palmas.c index cfbc9dc..4f9a62c 100644 --- a/drivers/power/palmas.c +++ b/drivers/power/palmas.c @@ -23,7 +23,26 @@ void palmas_init_settings(void) #endif } -int palmas_mmc1_poweron_ldo(void) +#if defined(CONFIG_OMAP54XX) +int lp873x_mmc1_poweron_ldo(uint voltage) +{ + if (palmas_i2c_write_u8(LP873X_LDO1_ADDR, LP873X_LDO1_VOLTAGE, + voltage)) { + printf("lp873x: could not set LDO1 voltage.\n"); + return 1; + } + /* TURN ON LDO1 */ + if (palmas_i2c_write_u8(LP873X_LDO1_ADDR, LP873X_LDO1_CTRL, + LP873X_LDO_CTRL_EN | LP873X_LDO_CTRL_RDIS_EN)) { + printf("lp873x: could not turn on LDO1.\n"); + return 1; + } + return 0; + +} +#endif + +int palmas_mmc1_poweron_ldo(uint voltage) { u8 val = 0; |