summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2014-02-17 14:16:08 -0500
committerTom Rini <trini@ti.com>2014-02-17 14:16:08 -0500
commit18c83588bc830dbad5a96ca19a85184da58f4d09 (patch)
tree6c6828f97876aa9974f29d2c8f5f248b8188a172 /drivers
parent22a240c32c1340183fce12867ae5f8736b92a638 (diff)
parentb818d9ab8d96471c40ccbd4541a46dfa415eda73 (diff)
downloadu-boot-imx-18c83588bc830dbad5a96ca19a85184da58f4d09.zip
u-boot-imx-18c83588bc830dbad5a96ca19a85184da58f4d09.tar.gz
u-boot-imx-18c83588bc830dbad5a96ca19a85184da58f4d09.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-mmc
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mmc/dw_mmc.c2
-rw-r--r--drivers/mmc/exynos_dw_mmc.c17
-rw-r--r--drivers/mmc/mmc.c79
-rw-r--r--drivers/mmc/zynq_sdhci.c3
4 files changed, 46 insertions, 55 deletions
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 4cec5aa..d45c15c 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -237,7 +237,7 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
* host->bus_hz should be set from user.
*/
if (host->get_mmc_clk)
- sclk = host->get_mmc_clk(host->dev_index);
+ sclk = host->get_mmc_clk(host);
else if (host->bus_hz)
sclk = host->bus_hz;
else {
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index b3e5c5e..de8cdcc 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -29,9 +29,22 @@ static void exynos_dwmci_clksel(struct dwmci_host *host)
dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val);
}
-unsigned int exynos_dwmci_get_clk(int dev_index)
+unsigned int exynos_dwmci_get_clk(struct dwmci_host *host)
{
- return get_mmc_clk(dev_index);
+ unsigned long sclk;
+ int8_t clk_div;
+
+ /*
+ * Since SDCLKIN is divided inside controller by the DIVRATIO
+ * value set in the CLKSEL register, we need to use the same output
+ * clock value to calculate the CLKDIV value.
+ * as per user manual:cclk_in = SDCLKIN / (DIVRATIO + 1)
+ */
+ clk_div = ((dwmci_readl(host, DWMCI_CLKSEL) >> DWMCI_DIVRATIO_BIT)
+ & DWMCI_DIVRATIO_MASK) + 1;
+ sclk = get_mmc_clk(host->dev_index);
+
+ return sclk / clk_div;
}
static void exynos_dwmci_board_init(struct dwmci_host *host)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index c6a1c23..8ab0bc9 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -430,7 +430,7 @@ int mmc_complete_op_cond(struct mmc *mmc)
mmc->ocr = cmd.response[0];
mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS);
- mmc->rca = 0;
+ mmc->rca = 1;
return 0;
}
@@ -1442,67 +1442,44 @@ int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
}
/*
- * This function shall form and send the commands to open / close the
- * boot partition specified by user.
- *
- * Input Parameters:
- * ack: 0x0 - No boot acknowledge sent (default)
- * 0x1 - Boot acknowledge sent during boot operation
- * part_num: User selects boot data that will be sent to master
- * 0x0 - Device not boot enabled (default)
- * 0x1 - Boot partition 1 enabled for boot
- * 0x2 - Boot partition 2 enabled for boot
- * access: User selects partitions to access
- * 0x0 : No access to boot partition (default)
- * 0x1 : R/W boot partition 1
- * 0x2 : R/W boot partition 2
- * 0x3 : R/W Replay Protected Memory Block (RPMB)
+ * Modify EXT_CSD[177] which is BOOT_BUS_WIDTH
+ * based on the passed in values for BOOT_BUS_WIDTH, RESET_BOOT_BUS_WIDTH
+ * and BOOT_MODE.
*
* Returns 0 on success.
*/
-int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
+int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode)
{
int err;
- struct mmc_cmd cmd;
- /* Boot ack enable, boot partition enable , boot partition access */
- cmd.cmdidx = MMC_CMD_SWITCH;
- cmd.resp_type = MMC_RSP_R1b;
-
- cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (EXT_CSD_PART_CONF << 16) |
- ((EXT_CSD_BOOT_ACK(ack) |
- EXT_CSD_BOOT_PART_NUM(part_num) |
- EXT_CSD_PARTITION_ACCESS(access)) << 8);
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_BUS_WIDTH,
+ EXT_CSD_BOOT_BUS_WIDTH_MODE(mode) |
+ EXT_CSD_BOOT_BUS_WIDTH_RESET(reset) |
+ EXT_CSD_BOOT_BUS_WIDTH_WIDTH(width));
- err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err) {
- if (access) {
- debug("mmc boot partition#%d open fail:Error1 = %d\n",
- part_num, err);
- } else {
- debug("mmc boot partition#%d close fail:Error = %d\n",
- part_num, err);
- }
+ if (err)
return err;
- }
+ return 0;
+}
- if (access) {
- /* 4bit transfer mode at booting time. */
- cmd.cmdidx = MMC_CMD_SWITCH;
- cmd.resp_type = MMC_RSP_R1b;
+/*
+ * Modify EXT_CSD[179] which is PARTITION_CONFIG (formerly BOOT_CONFIG)
+ * based on the passed in values for BOOT_ACK, BOOT_PARTITION_ENABLE and
+ * PARTITION_ACCESS.
+ *
+ * Returns 0 on success.
+ */
+int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
+{
+ int err;
- cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (EXT_CSD_BOOT_BUS_WIDTH << 16) |
- ((1 << 0) << 8);
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF,
+ EXT_CSD_BOOT_ACK(ack) |
+ EXT_CSD_BOOT_PART_NUM(part_num) |
+ EXT_CSD_PARTITION_ACCESS(access));
- err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err) {
- debug("mmc boot partition#%d open fail:Error2 = %d\n",
- part_num, err);
- return err;
- }
- }
+ if (err)
+ return err;
return 0;
}
#endif
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 610bef5..72a272f 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -23,7 +23,8 @@ int zynq_sdhci_init(u32 regbase)
host->name = "zynq_sdhci";
host->ioaddr = (void *)regbase;
- host->quirks = SDHCI_QUIRK_NO_CD | SDHCI_QUIRK_WAIT_SEND_CMD;
+ host->quirks = SDHCI_QUIRK_NO_CD | SDHCI_QUIRK_WAIT_SEND_CMD |
+ SDHCI_QUIRK_BROKEN_R1B;
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
host->host_caps = MMC_MODE_HC;