Merge branch 'master' of git://git.denx.de/u-boot-arm

10 files changed, 437 insertions, 77 deletions

diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 4070d4e..5da20ed 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -129,13 +129,13 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 	unsigned int timeout = 100000;
 	u32 retry = 10000;
 	u32 mask, ctrl;
+	ulong start = get_timer(0);
 
 	while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
-		if (timeout == 0) {
+		if (get_timer(start) > timeout) {
 			printf("Timeout on data busy\n");
 			return TIMEOUT;
 		}
-		timeout--;
 	}
 
 	dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
@@ -143,7 +143,6 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 	if (data)
 		dwmci_prepare_data(host, data);
 
-
 	dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
 
 	if (data)
@@ -231,9 +230,8 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
 	int timeout = 10000;
 	unsigned long sclk;
 
-	if (freq == host->clock)
+	if ((freq == host->clock) || (freq == 0))
 		return 0;
-
 	/*
 	 * If host->mmc_clk didn't define,
 	 * then assume that host->bus_hz is source clock value.
@@ -314,7 +312,7 @@ static void dwmci_set_ios(struct mmc *mmc)
 static int dwmci_init(struct mmc *mmc)
 {
 	struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
-	u32 fifo_size, fifoth_val;
+	u32 fifo_size;
 
 	dwmci_writel(host, DWMCI_PWREN, 1);
 
@@ -323,6 +321,9 @@ static int dwmci_init(struct mmc *mmc)
 		return -1;
 	}
 
+	/* Enumerate at 400KHz */
+	dwmci_setup_bus(host, mmc->f_min);
+
 	dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
 	dwmci_writel(host, DWMCI_INTMASK, 0);
 
@@ -331,13 +332,13 @@ static int dwmci_init(struct mmc *mmc)
 	dwmci_writel(host, DWMCI_IDINTEN, 0);
 	dwmci_writel(host, DWMCI_BMOD, 1);
 
-	fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
-	if (host->fifoth_val)
-		fifoth_val = host->fifoth_val;
-	else
-		fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) |
-			TX_WMARK(fifo_size/2);
-	dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
+	if (!host->fifoth_val) {
+		fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
+		fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
+		host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
+			TX_WMARK(fifo_size / 2);
+	}
+	dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
 
 	dwmci_writel(host, DWMCI_CLKENA, 0);
 	dwmci_writel(host, DWMCI_CLKSRC, 0);
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index 72a31b7..4238dd9 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -19,39 +19,146 @@
  */
 
 #include <common.h>
-#include <malloc.h>
 #include <dwmmc.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <malloc.h>
 #include <asm/arch/dwmmc.h>
 #include <asm/arch/clk.h>
+#include <asm/arch/pinmux.h>
 
-static char *EXYNOS_NAME = "EXYNOS DWMMC";
+#define	DWMMC_MAX_CH_NUM		4
+#define	DWMMC_MAX_FREQ			52000000
+#define	DWMMC_MIN_FREQ			400000
+#define	DWMMC_MMC0_CLKSEL_VAL		0x03030001
+#define	DWMMC_MMC2_CLKSEL_VAL		0x03020001
 
+/*
+ * Function used as callback function to initialise the
+ * CLKSEL register for every mmc channel.
+ */
 static void exynos_dwmci_clksel(struct dwmci_host *host)
 {
-	u32 val;
-	val = DWMCI_SET_SAMPLE_CLK(DWMCI_SHIFT_0) |
-		DWMCI_SET_DRV_CLK(DWMCI_SHIFT_0) | DWMCI_SET_DIV_RATIO(0);
+	dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val);
+}
 
-	dwmci_writel(host, DWMCI_CLKSEL, val);
+unsigned int exynos_dwmci_get_clk(int dev_index)
+{
+	return get_mmc_clk(dev_index);
 }
 
-int exynos_dwmci_init(u32 regbase, int bus_width, int index)
+/*
+ * This function adds the mmc channel to be registered with mmc core.
+ * index -	mmc channel number.
+ * regbase -	register base address of mmc channel specified in 'index'.
+ * bus_width -	operating bus width of mmc channel specified in 'index'.
+ * clksel -	value to be written into CLKSEL register in case of FDT.
+ *		NULL in case od non-FDT.
+ */
+int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
 {
 	struct dwmci_host *host = NULL;
+	unsigned int div;
+	unsigned long freq, sclk;
 	host = malloc(sizeof(struct dwmci_host));
 	if (!host) {
 		printf("dwmci_host malloc fail!\n");
 		return 1;
 	}
+	/* request mmc clock vlaue of 52MHz.  */
+	freq = 52000000;
+	sclk = get_mmc_clk(index);
+	div = DIV_ROUND_UP(sclk, freq);
+	/* set the clock divisor for mmc */
+	set_mmc_clk(index, div);
 
-	host->name = EXYNOS_NAME;
+	host->name = "EXYNOS DWMMC";
 	host->ioaddr = (void *)regbase;
 	host->buswidth = bus_width;
+
+	if (clksel) {
+		host->clksel_val = clksel;
+	} else {
+		if (0 == index)
+			host->clksel_val = DWMMC_MMC0_CLKSEL_VAL;
+		if (2 == index)
+			host->clksel_val = DWMMC_MMC2_CLKSEL_VAL;
+	}
+
 	host->clksel = exynos_dwmci_clksel;
 	host->dev_index = index;
+	host->mmc_clk = exynos_dwmci_get_clk;
+	/* Add the mmc channel to be registered with mmc core */
+	if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {
+		debug("dwmmc%d registration failed\n", index);
+		return -1;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_OF_CONTROL
+int exynos_dwmmc_init(const void *blob)
+{
+	int index, bus_width;
+	int node_list[DWMMC_MAX_CH_NUM];
+	int err = 0, dev_id, flag, count, i;
+	u32 clksel_val, base, timing[3];
+
+	count = fdtdec_find_aliases_for_id(blob, "mmc",
+				COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list,
+				DWMMC_MAX_CH_NUM);
+
+	for (i = 0; i < count; i++) {
+		int node = node_list[i];
+
+		if (node <= 0)
+			continue;
 
-	add_dwmci(host, 52000000, 400000);
+		/* Extract device id for each mmc channel */
+		dev_id = pinmux_decode_periph_id(blob, node);
 
+		/* Get the bus width from the device node */
+		bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
+		if (bus_width <= 0) {
+			debug("DWMMC: Can't get bus-width\n");
+			return -1;
+		}
+		if (8 == bus_width)
+			flag = PINMUX_FLAG_8BIT_MODE;
+		else
+			flag = PINMUX_FLAG_NONE;
+
+		/* config pinmux for each mmc channel */
+		err = exynos_pinmux_config(dev_id, flag);
+		if (err) {
+			debug("DWMMC not configured\n");
+			return err;
+		}
+
+		index = dev_id - PERIPH_ID_SDMMC0;
+
+		/* Get the base address from the device node */
+		base = fdtdec_get_addr(blob, node, "reg");
+		if (!base) {
+			debug("DWMMC: Can't get base address\n");
+			return -1;
+		}
+		/* Extract the timing info from the node */
+		err = fdtdec_get_int_array(blob, node, "samsung,timing",
+					timing, 3);
+		if (err) {
+			debug("Can't get sdr-timings for divider\n");
+			return -1;
+		}
+
+		clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
+				DWMCI_SET_DRV_CLK(timing[1]) |
+				DWMCI_SET_DIV_RATIO(timing[2]));
+		/* Initialise each mmc channel */
+		err = exynos_dwmci_add_port(index, base, bus_width, clksel_val);
+		if (err)
+			debug("dwmmc Channel-%d init failed\n", index);
+	}
 	return 0;
 }
-
+#endif
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index e6a296a..83d2df7 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1503,3 +1503,137 @@ int mmc_initialize(bd_t *bis)
 	do_preinit();
 	return 0;
 }
+
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+/*
+ * This function changes the size of boot partition and the size of rpmb
+ * partition present on EMMC devices.
+ *
+ * Input Parameters:
+ * struct *mmc: pointer for the mmc device strcuture
+ * bootsize: size of boot partition
+ * rpmbsize: size of rpmb partition
+ *
+ * Returns 0 on success.
+ */
+
+int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
+				unsigned long rpmbsize)
+{
+	int err;
+	struct mmc_cmd cmd;
+
+	/* Only use this command for raw EMMC moviNAND. Enter backdoor mode */
+	cmd.cmdidx = MMC_CMD_RES_MAN;
+	cmd.resp_type = MMC_RSP_R1b;
+	cmd.cmdarg = MMC_CMD62_ARG1;
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		debug("mmc_boot_partition_size_change: Error1 = %d\n", err);
+		return err;
+	}
+
+	/* Boot partition changing mode */
+	cmd.cmdidx = MMC_CMD_RES_MAN;
+	cmd.resp_type = MMC_RSP_R1b;
+	cmd.cmdarg = MMC_CMD62_ARG2;
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		debug("mmc_boot_partition_size_change: Error2 = %d\n", err);
+		return err;
+	}
+	/* boot partition size is multiple of 128KB */
+	bootsize = (bootsize * 1024) / 128;
+
+	/* Arg: boot partition size */
+	cmd.cmdidx = MMC_CMD_RES_MAN;
+	cmd.resp_type = MMC_RSP_R1b;
+	cmd.cmdarg = bootsize;
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		debug("mmc_boot_partition_size_change: Error3 = %d\n", err);
+		return err;
+	}
+	/* RPMB partition size is multiple of 128KB */
+	rpmbsize = (rpmbsize * 1024) / 128;
+	/* Arg: RPMB partition size */
+	cmd.cmdidx = MMC_CMD_RES_MAN;
+	cmd.resp_type = MMC_RSP_R1b;
+	cmd.cmdarg = rpmbsize;
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		debug("mmc_boot_partition_size_change: Error4 = %d\n", err);
+		return err;
+	}
+	return 0;
+}
+
+/*
+ * This function shall form and send the commands to open / close the
+ * boot partition specified by user.
+ *
+ * Input Parameters:
+ * ack: 0x0 - No boot acknowledge sent (default)
+ *	0x1 - Boot acknowledge sent during boot operation
+ * part_num: User selects boot data that will be sent to master
+ *	0x0 - Device not boot enabled (default)
+ *	0x1 - Boot partition 1 enabled for boot
+ *	0x2 - Boot partition 2 enabled for boot
+ * access: User selects partitions to access
+ *	0x0 : No access to boot partition (default)
+ *	0x1 : R/W boot partition 1
+ *	0x2 : R/W boot partition 2
+ *	0x3 : R/W Replay Protected Memory Block (RPMB)
+ *
+ * Returns 0 on success.
+ */
+int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
+{
+	int err;
+	struct mmc_cmd cmd;
+
+	/* Boot ack enable, boot partition enable , boot partition access */
+	cmd.cmdidx = MMC_CMD_SWITCH;
+	cmd.resp_type = MMC_RSP_R1b;
+
+	cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+			(EXT_CSD_PART_CONF << 16) |
+			((EXT_CSD_BOOT_ACK(ack) |
+			EXT_CSD_BOOT_PART_NUM(part_num) |
+			EXT_CSD_PARTITION_ACCESS(access)) << 8);
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		if (access) {
+			debug("mmc boot partition#%d open fail:Error1 = %d\n",
+			      part_num, err);
+		} else {
+			debug("mmc boot partition#%d close fail:Error = %d\n",
+			      part_num, err);
+		}
+		return err;
+	}
+
+	if (access) {
+		/* 4bit transfer mode at booting time. */
+		cmd.cmdidx = MMC_CMD_SWITCH;
+		cmd.resp_type = MMC_RSP_R1b;
+
+		cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+				(EXT_CSD_BOOT_BUS_WIDTH << 16) |
+				((1 << 0) << 8);
+
+		err = mmc_send_cmd(mmc, &cmd, NULL);
+		if (err) {
+			debug("mmc boot partition#%d open fail:Error2 = %d\n",
+			      part_num, err);
+			return err;
+		}
+	}
+	return 0;
+}
+#endif
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index 90f8392..ecbb210 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -32,6 +32,7 @@ endif
 COBJS-$(CONFIG_SPI_FLASH)	+= spi_flash.o
 COBJS-$(CONFIG_SPI_FLASH_ATMEL)	+= atmel.o
 COBJS-$(CONFIG_SPI_FLASH_EON)	+= eon.o
+COBJS-$(CONFIG_SPI_FLASH_GIGADEVICE)	+= gigadevice.o
 COBJS-$(CONFIG_SPI_FLASH_MACRONIX)	+= macronix.o
 COBJS-$(CONFIG_SPI_FLASH_SPANSION)	+= spansion.o
 COBJS-$(CONFIG_SPI_FLASH_SST)	+= sst.o
diff --git a/drivers/mtd/spi/gigadevice.c b/drivers/mtd/spi/gigadevice.c
new file mode 100644
index 0000000..b5e1ebe
--- /dev/null
+++ b/drivers/mtd/spi/gigadevice.c
@@ -0,0 +1,81 @@
+/*
+ * Gigadevice SPI flash driver
+ * Copyright 2013, Samsung Electronics Co., Ltd.
+ * Author: Banajit Goswami <banajit.g@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi_flash.h>
+
+#include "spi_flash_internal.h"
+
+struct gigadevice_spi_flash_params {
+	uint16_t	id;
+	uint16_t	nr_blocks;
+	const char	*name;
+};
+
+static const struct gigadevice_spi_flash_params gigadevice_spi_flash_table[] = {
+	{
+		.id			= 0x6016,
+		.nr_blocks		= 64,
+		.name			= "GD25LQ",
+	},
+	{
+		.id			= 0x4017,
+		.nr_blocks		= 128,
+		.name			= "GD25Q64B",
+	},
+};
+
+struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode)
+{
+	const struct gigadevice_spi_flash_params *params;
+	struct spi_flash *flash;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(gigadevice_spi_flash_table); i++) {
+		params = &gigadevice_spi_flash_table[i];
+		if (params->id == ((idcode[1] << 8) | idcode[2]))
+			break;
+	}
+
+	if (i == ARRAY_SIZE(gigadevice_spi_flash_table)) {
+		debug("SF: Unsupported Gigadevice ID %02x%02x\n",
+				idcode[1], idcode[2]);
+		return NULL;
+	}
+
+	flash = spi_flash_alloc_base(spi, params->name);
+	if (!flash) {
+		debug("SF: Failed to allocate memory\n");
+		return NULL;
+	}
+	/* page_size */
+	flash->page_size = 256;
+	/* sector_size = page_size * pages_per_sector */
+	flash->sector_size = flash->page_size * 16;
+	/* size = sector_size * sector_per_block * number of blocks */
+	flash->size = flash->sector_size * 16 * params->nr_blocks;
+
+	return flash;
+}
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 0e38f59..9991d47 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -342,6 +342,9 @@ static const struct {
 #ifdef CONFIG_SPI_FLASH_EON
 	{ 0, 0x1c, spi_flash_probe_eon, },
 #endif
+#ifdef CONFIG_SPI_FLASH_GIGADEVICE
+	{ 0, 0xc8, spi_flash_probe_gigadevice, },
+#endif
 #ifdef CONFIG_SPI_FLASH_MACRONIX
 	{ 0, 0xc2, spi_flash_probe_macronix, },
 #endif
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index 141cfa8..e0afbc3 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -106,3 +106,4 @@ struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode);
 struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
 struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode);
 struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode);
+struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode);
diff --git a/drivers/power/exynos-tmu.c b/drivers/power/exynos-tmu.c
index d4b3e65..9a093a5 100644
--- a/drivers/power/exynos-tmu.c
+++ b/drivers/power/exynos-tmu.c
@@ -50,15 +50,15 @@
 /* Tmeperature threshold values for various thermal events */
 struct temperature_params {
 	/* minimum value in temperature code range */
-	unsigned int min_val;
+	unsigned min_val;
 	/* maximum value in temperature code range */
-	unsigned int max_val;
+	unsigned max_val;
 	/* temperature threshold to start warning */
-	unsigned int start_warning;
+	unsigned start_warning;
 	/* temperature threshold CPU tripping */
-	unsigned int start_tripping;
+	unsigned start_tripping;
 	/* temperature threshold for HW tripping */
-	unsigned int hardware_tripping;
+	unsigned hardware_tripping;
 };
 
 /* Pre-defined values and thresholds for calibration of current temperature */
@@ -66,25 +66,27 @@ struct tmu_data {
 	/* pre-defined temperature thresholds */
 	struct temperature_params ts;
 	/* pre-defined efuse range minimum value */
-	unsigned int efuse_min_value;
+	unsigned efuse_min_value;
 	/* pre-defined efuse value for temperature calibration */
-	unsigned int efuse_value;
+	unsigned efuse_value;
 	/* pre-defined efuse range maximum value */
-	unsigned int efuse_max_value;
+	unsigned efuse_max_value;
 	/* current temperature sensing slope */
-	unsigned int slope;
+	unsigned slope;
 };
 
 /* TMU device specific details and status */
 struct tmu_info {
 	/* base Address for the TMU */
-	unsigned tmu_base;
+	struct exynos5_tmu_reg *tmu_base;
+	/* mux Address for the TMU */
+	int tmu_mux;
 	/* pre-defined values for calibration and thresholds */
 	struct tmu_data data;
 	/* value required for triminfo_25 calibration */
-	unsigned int te1;
+	unsigned te1;
 	/* value required for triminfo_85 calibration */
-	unsigned int te2;
+	unsigned te2;
 	/* Value for measured data calibration */
 	int dc_value;
 	/* enum value indicating status of the TMU */
@@ -103,17 +105,24 @@ static struct tmu_info gbl_info;
  */
 static int get_cur_temp(struct tmu_info *info)
 {
-	int cur_temp;
-	struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base;
+	struct exynos5_tmu_reg *reg = info->tmu_base;
+	ulong start;
+	int cur_temp = 0;
 
 	/*
 	 * Temperature code range between min 25 and max 125.
 	 * May run more than once for first call as initial sensing
 	 * has not yet happened.
 	 */
-	do {
-		cur_temp = readl(&reg->current_temp) & 0xff;
-	} while (cur_temp == 0 && info->tmu_state == TMU_STATUS_NORMAL);
+	if (info->tmu_state == TMU_STATUS_NORMAL) {
+		start = get_timer(0);
+		do {
+			cur_temp = readl(&reg->current_temp) & 0xff;
+		} while ((cur_temp == 0) || (get_timer(start) > 100));
+	}
+
+	if (cur_temp == 0)
+		return cur_temp;
 
 	/* Calibrate current temperature */
 	cur_temp = cur_temp - info->te1 + info->dc_value;
@@ -137,23 +146,29 @@ enum tmu_status_t tmu_monitor(int *temp)
 
 	/* Read current temperature of the SOC */
 	cur_temp = get_cur_temp(&gbl_info);
+
+	if (!cur_temp)
+		goto out;
+
 	*temp = cur_temp;
 
 	/* Temperature code lies between min 25 and max 125 */
-	if (cur_temp >= data->ts.start_tripping &&
-			cur_temp <= data->ts.max_val) {
+	if ((cur_temp >= data->ts.start_tripping) &&
+	    (cur_temp <= data->ts.max_val))
 		return TMU_STATUS_TRIPPED;
-	} else if (cur_temp >= data->ts.start_warning) {
+
+	if (cur_temp >= data->ts.start_warning)
 		return TMU_STATUS_WARNING;
-	} else if (cur_temp < data->ts.start_warning &&
-			cur_temp >= data->ts.min_val) {
+
+	if ((cur_temp < data->ts.start_warning) &&
+	    (cur_temp >= data->ts.min_val))
 		return TMU_STATUS_NORMAL;
-	} else {
-		/* Temperature code does not lie between min 25 and max 125 */
-		gbl_info.tmu_state = TMU_STATUS_INIT;
-		debug("EXYNOS_TMU: Thermal reading failed\n");
-		return TMU_STATUS_INIT;
-	}
+
+ out:
+	/* Temperature code does not lie between min 25 and max 125 */
+	gbl_info.tmu_state = TMU_STATUS_INIT;
+	debug("EXYNOS_TMU: Thermal reading failed\n");
+	return TMU_STATUS_INIT;
 }
 
 /*
@@ -166,6 +181,7 @@ enum tmu_status_t tmu_monitor(int *temp)
 static int get_tmu_fdt_values(struct tmu_info *info, const void *blob)
 {
 #ifdef CONFIG_OF_CONTROL
+	fdt_addr_t addr;
 	int node;
 	int error = 0;
 
@@ -183,46 +199,58 @@ static int get_tmu_fdt_values(struct tmu_info *info, const void *blob)
 	 * miscalculation of register values in tmu_setup_parameters
 	 * may result in misleading current temperature.
 	 */
-	info->tmu_base = fdtdec_get_addr(blob, node, "reg");
-	if (info->tmu_base == FDT_ADDR_T_NONE) {
+	addr = fdtdec_get_addr(blob, node, "reg");
+	if (addr == FDT_ADDR_T_NONE) {
 		debug("%s: Missing tmu-base\n", __func__);
 		return -1;
 	}
+	info->tmu_base = (struct exynos5_tmu_reg *)addr;
+
+	/* Optional field. */
+	info->tmu_mux = fdtdec_get_int(blob,
+				node, "samsung,mux", -1);
+	/* Take default value as per the user manual b(110) */
+	if (info->tmu_mux == -1)
+		info->tmu_mux = 0x6;
+
 	info->data.ts.min_val = fdtdec_get_int(blob,
 				node, "samsung,min-temp", -1);
-	error |= info->data.ts.min_val;
+	error |= (info->data.ts.min_val == -1);
 	info->data.ts.max_val = fdtdec_get_int(blob,
 				node, "samsung,max-temp", -1);
-	error |= info->data.ts.max_val;
+	error |= (info->data.ts.max_val == -1);
 	info->data.ts.start_warning = fdtdec_get_int(blob,
 				node, "samsung,start-warning", -1);
-	error |= info->data.ts.start_warning;
+	error |= (info->data.ts.start_warning == -1);
 	info->data.ts.start_tripping = fdtdec_get_int(blob,
 				node, "samsung,start-tripping", -1);
-	error |= info->data.ts.start_tripping;
+	error |= (info->data.ts.start_tripping == -1);
 	info->data.ts.hardware_tripping = fdtdec_get_int(blob,
 				node, "samsung,hw-tripping", -1);
-	error |= info->data.ts.hardware_tripping;
+	error |= (info->data.ts.hardware_tripping == -1);
 	info->data.efuse_min_value = fdtdec_get_int(blob,
 				node, "samsung,efuse-min-value", -1);
-	error |= info->data.efuse_min_value;
+	error |= (info->data.efuse_min_value == -1);
 	info->data.efuse_value = fdtdec_get_int(blob,
 				node, "samsung,efuse-value", -1);
-	error |= info->data.efuse_value;
+	error |= (info->data.efuse_value == -1);
 	info->data.efuse_max_value = fdtdec_get_int(blob,
 				node, "samsung,efuse-max-value", -1);
-	error |= info->data.efuse_max_value;
+	error |= (info->data.efuse_max_value == -1);
 	info->data.slope = fdtdec_get_int(blob,
 				node, "samsung,slope", -1);
-	error |= info->data.slope;
+	error |= (info->data.slope == -1);
 	info->dc_value = fdtdec_get_int(blob,
 				node, "samsung,dc-value", -1);
-	error |= info->dc_value;
+	error |= (info->dc_value == -1);
 
-	if (error == -1) {
+	if (error) {
 		debug("fail to get tmu node properties\n");
 		return -1;
 	}
+#else
+	/* Non DT support may never be added. Just in case  */
+	return -1;
 #endif
 
 	return 0;
@@ -236,12 +264,12 @@ static int get_tmu_fdt_values(struct tmu_info *info, const void *blob)
  */
 static void tmu_setup_parameters(struct tmu_info *info)
 {
-	unsigned int te_code, con;
-	unsigned int warning_code, trip_code, hwtrip_code;
-	unsigned int cooling_temp;
-	unsigned int rising_value;
+	unsigned te_code, con;
+	unsigned warning_code, trip_code, hwtrip_code;
+	unsigned cooling_temp;
+	unsigned rising_value;
 	struct tmu_data *data = &info->data;
-	struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base;
+	struct exynos5_tmu_reg *reg = info->tmu_base;
 
 	/* Must reload for reading efuse value from triminfo register */
 	writel(TRIMINFO_RELOAD, &reg->triminfo_control);
@@ -288,7 +316,7 @@ static void tmu_setup_parameters(struct tmu_info *info)
 
 	/* TMU core enable */
 	con = readl(&reg->tmu_control);
-	con |= THERM_TRIP_EN | CORE_EN;
+	con |= THERM_TRIP_EN | CORE_EN | (info->tmu_mux << 20);
 
 	writel(con, &reg->tmu_control);
 
@@ -314,6 +342,5 @@ int tmu_init(const void *blob)
 	tmu_setup_parameters(&gbl_info);
 	gbl_info.tmu_state = TMU_STATUS_NORMAL;
 ret:
-
 	return gbl_info.tmu_state;
 }
diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
index 3c41242..e65125c 100644
--- a/drivers/serial/serial_s5p.c
+++ b/drivers/serial/serial_s5p.c
@@ -30,6 +30,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define RX_FIFO_COUNT_MASK	0xff
+#define RX_FIFO_FULL_MASK	(1 << 8)
+#define TX_FIFO_FULL_MASK	(1 << 24)
+
 static inline struct s5p_uart *s5p_get_base_uart(int dev_index)
 {
 	u32 offset = dev_index * sizeof(struct s5p_uart);
@@ -87,8 +91,8 @@ int serial_init_dev(const int dev_index)
 {
 	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
 
-	/* reset and enable FIFOs, set triggers to the maximum */
-	writel(0, &uart->ufcon);
+	/* enable FIFOs */
+	writel(0x1, &uart->ufcon);
 	writel(0, &uart->umcon);
 	/* 8N1 */
 	writel(0x3, &uart->ulcon);
@@ -130,7 +134,8 @@ int serial_getc_dev(const int dev_index)
 	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
 
 	/* wait for character to arrive */
-	while (!(readl(&uart->utrstat) & 0x1)) {
+	while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
+					 RX_FIFO_FULL_MASK))) {
 		if (serial_err_check(dev_index, 0))
 			return 0;
 	}
@@ -146,7 +151,7 @@ void serial_putc_dev(const char c, const int dev_index)
 	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
 
 	/* wait for room in the tx FIFO */
-	while (!(readl(&uart->utrstat) & 0x2)) {
+	while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
 		if (serial_err_check(dev_index, 1))
 			return;
 	}
diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c
index ed0823b..c3606d5 100644
--- a/drivers/video/exynos_fb.c
+++ b/drivers/video/exynos_fb.c
@@ -319,10 +319,10 @@ void lcd_ctrl_init(void *lcdbase)
 #ifdef CONFIG_OF_CONTROL
 	if (exynos_fimd_parse_dt(gd->fdt_blob))
 		debug("Can't get proper panel info\n");
-#endif
+#else
 	/* initialize parameters which is specific to panel. */
 	init_panel_info(&panel_info);
-
+#endif
 	panel_width = panel_info.vl_width;
 	panel_height = panel_info.vl_height;