From f10b4c0e650e9a7e8ff4631c3dd16e84b0d6fb6a Mon Sep 17 00:00:00 2001 From: Rajeshwari Shinde Date: Tue, 22 Jan 2013 20:30:18 +0000 Subject: SF: Add driver for Gigabyte device GD25LQ and GD25Q64B This patch adds driver for the gigabyte devices GD25LQ and GD25Q64B required for Snow Board. Signed-off-by: Rajeshwari Shinde Acked-by: Simon Glass Reviewed-by: Tom Rini Signed-off-by: Minkyu Kang --- drivers/mtd/spi/Makefile | 1 + drivers/mtd/spi/gigadevice.c | 81 ++++++++++++++++++++++++++++++++++++ drivers/mtd/spi/spi_flash.c | 3 ++ drivers/mtd/spi/spi_flash_internal.h | 1 + 4 files changed, 86 insertions(+) create mode 100644 drivers/mtd/spi/gigadevice.c (limited to 'drivers') diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index 90f8392..ecbb210 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -32,6 +32,7 @@ endif COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o COBJS-$(CONFIG_SPI_FLASH_ATMEL) += atmel.o COBJS-$(CONFIG_SPI_FLASH_EON) += eon.o +COBJS-$(CONFIG_SPI_FLASH_GIGADEVICE) += gigadevice.o COBJS-$(CONFIG_SPI_FLASH_MACRONIX) += macronix.o COBJS-$(CONFIG_SPI_FLASH_SPANSION) += spansion.o COBJS-$(CONFIG_SPI_FLASH_SST) += sst.o diff --git a/drivers/mtd/spi/gigadevice.c b/drivers/mtd/spi/gigadevice.c new file mode 100644 index 0000000..b5e1ebe --- /dev/null +++ b/drivers/mtd/spi/gigadevice.c @@ -0,0 +1,81 @@ +/* + * Gigadevice SPI flash driver + * Copyright 2013, Samsung Electronics Co., Ltd. + * Author: Banajit Goswami + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include "spi_flash_internal.h" + +struct gigadevice_spi_flash_params { + uint16_t id; + uint16_t nr_blocks; + const char *name; +}; + +static const struct gigadevice_spi_flash_params gigadevice_spi_flash_table[] = { + { + .id = 0x6016, + .nr_blocks = 64, + .name = "GD25LQ", + }, + { + .id = 0x4017, + .nr_blocks = 128, + .name = "GD25Q64B", + }, +}; + +struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode) +{ + const struct gigadevice_spi_flash_params *params; + struct spi_flash *flash; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(gigadevice_spi_flash_table); i++) { + params = &gigadevice_spi_flash_table[i]; + if (params->id == ((idcode[1] << 8) | idcode[2])) + break; + } + + if (i == ARRAY_SIZE(gigadevice_spi_flash_table)) { + debug("SF: Unsupported Gigadevice ID %02x%02x\n", + idcode[1], idcode[2]); + return NULL; + } + + flash = spi_flash_alloc_base(spi, params->name); + if (!flash) { + debug("SF: Failed to allocate memory\n"); + return NULL; + } + /* page_size */ + flash->page_size = 256; + /* sector_size = page_size * pages_per_sector */ + flash->sector_size = flash->page_size * 16; + /* size = sector_size * sector_per_block * number of blocks */ + flash->size = flash->sector_size * 16 * params->nr_blocks; + + return flash; +} diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 111185a..6507aa3 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -346,6 +346,9 @@ static const struct { #ifdef CONFIG_SPI_FLASH_EON { 0, 0x1c, spi_flash_probe_eon, }, #endif +#ifdef CONFIG_SPI_FLASH_GIGADEVICE + { 0, 0xc8, spi_flash_probe_gigadevice, }, +#endif #ifdef CONFIG_SPI_FLASH_MACRONIX { 0, 0xc2, spi_flash_probe_macronix, }, #endif diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h index 141cfa8..e0afbc3 100644 --- a/drivers/mtd/spi/spi_flash_internal.h +++ b/drivers/mtd/spi/spi_flash_internal.h @@ -106,3 +106,4 @@ struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode); +struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode); -- cgit v1.1 From ffbff1dd6e6a25cc7db60576ad64e7bd570fa643 Mon Sep 17 00:00:00 2001 From: Akshay Saraswat Date: Thu, 21 Mar 2013 20:33:04 +0000 Subject: Exynos: uart: s5p: enabling the uart tx/rx fifo This patch enables the uart tx/rx fifo. Now that fifo is enabled, the uart read/write functions are modfied to check the UFSTAT register for fifo status instead of UTRSTAT (as required with fifo's enabled). Tested by booting linux kernel. Before enabling tx/rx fifo "Uncompressing linux" message is garbled and after enabling it is proper. Signed-off-by: Alim Akhtar Signed-off-by: Akshay Saraswat Signed-off-by: Minkyu Kang --- drivers/serial/serial_s5p.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index 3c41242..e65125c 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -30,6 +30,10 @@ DECLARE_GLOBAL_DATA_PTR; +#define RX_FIFO_COUNT_MASK 0xff +#define RX_FIFO_FULL_MASK (1 << 8) +#define TX_FIFO_FULL_MASK (1 << 24) + static inline struct s5p_uart *s5p_get_base_uart(int dev_index) { u32 offset = dev_index * sizeof(struct s5p_uart); @@ -87,8 +91,8 @@ int serial_init_dev(const int dev_index) { struct s5p_uart *const uart = s5p_get_base_uart(dev_index); - /* reset and enable FIFOs, set triggers to the maximum */ - writel(0, &uart->ufcon); + /* enable FIFOs */ + writel(0x1, &uart->ufcon); writel(0, &uart->umcon); /* 8N1 */ writel(0x3, &uart->ulcon); @@ -130,7 +134,8 @@ int serial_getc_dev(const int dev_index) struct s5p_uart *const uart = s5p_get_base_uart(dev_index); /* wait for character to arrive */ - while (!(readl(&uart->utrstat) & 0x1)) { + while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK | + RX_FIFO_FULL_MASK))) { if (serial_err_check(dev_index, 0)) return 0; } @@ -146,7 +151,7 @@ void serial_putc_dev(const char c, const int dev_index) struct s5p_uart *const uart = s5p_get_base_uart(dev_index); /* wait for room in the tx FIFO */ - while (!(readl(&uart->utrstat) & 0x2)) { + while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) { if (serial_err_check(dev_index, 1)) return; } -- cgit v1.1 From 9c50e35ff2f8ead8df5781988927b51ea03c6192 Mon Sep 17 00:00:00 2001 From: Amar Date: Sat, 27 Apr 2013 11:42:54 +0530 Subject: DWMMC: Initialise dwmci and resolve EMMC read write issues This patch enumerates dwmci and set auto stop command during dwmci initialisation. EMMC read/write is not happening in current implementation due to improper fifo size computation. Hence modified the fifo size computation to resolve EMMC read write issues. Signed-off-by: Amar Acked-by: Jaehoon Chung Signed-off-by: Minkyu Kang --- drivers/mmc/dw_mmc.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index 4070d4e..1307b12 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -129,13 +129,13 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, unsigned int timeout = 100000; u32 retry = 10000; u32 mask, ctrl; + ulong start = get_timer(0); while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) { - if (timeout == 0) { + if (get_timer(start) > timeout) { printf("Timeout on data busy\n"); return TIMEOUT; } - timeout--; } dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL); @@ -143,7 +143,6 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, if (data) dwmci_prepare_data(host, data); - dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg); if (data) @@ -231,9 +230,8 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq) int timeout = 10000; unsigned long sclk; - if (freq == host->clock) + if ((freq == host->clock) || (freq == 0)) return 0; - /* * If host->mmc_clk didn't define, * then assume that host->bus_hz is source clock value. @@ -323,6 +321,9 @@ static int dwmci_init(struct mmc *mmc) return -1; } + /* Enumerate at 400KHz */ + dwmci_setup_bus(host, mmc->f_min); + dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF); dwmci_writel(host, DWMCI_INTMASK, 0); @@ -332,11 +333,13 @@ static int dwmci_init(struct mmc *mmc) dwmci_writel(host, DWMCI_BMOD, 1); fifo_size = dwmci_readl(host, DWMCI_FIFOTH); - if (host->fifoth_val) + fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1; + if (host->fifoth_val) { fifoth_val = host->fifoth_val; - else - fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) | - TX_WMARK(fifo_size/2); + } else { + fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) | + TX_WMARK(fifo_size / 2); + } dwmci_writel(host, DWMCI_FIFOTH, fifoth_val); dwmci_writel(host, DWMCI_CLKENA, 0); -- cgit v1.1 From a082a2dde06142bb599551ed3dad324923a130e0 Mon Sep 17 00:00:00 2001 From: Amar Date: Sat, 27 Apr 2013 11:42:55 +0530 Subject: EXYNOS5: DWMMC: Added FDT support for DWMMC This patch adds FDT support for DWMMC, by reading the DWMMC node data from the device tree and initialising DWMMC channels as per data obtained from the node. Signed-off-by: Vivek Gautam Signed-off-by: Amar Acked-by: Simon Glass Signed-off-by: Minkyu Kang --- drivers/mmc/exynos_dw_mmc.c | 127 ++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 117 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c index 72a31b7..4238dd9 100644 --- a/drivers/mmc/exynos_dw_mmc.c +++ b/drivers/mmc/exynos_dw_mmc.c @@ -19,39 +19,146 @@ */ #include -#include #include +#include +#include +#include #include #include +#include -static char *EXYNOS_NAME = "EXYNOS DWMMC"; +#define DWMMC_MAX_CH_NUM 4 +#define DWMMC_MAX_FREQ 52000000 +#define DWMMC_MIN_FREQ 400000 +#define DWMMC_MMC0_CLKSEL_VAL 0x03030001 +#define DWMMC_MMC2_CLKSEL_VAL 0x03020001 +/* + * Function used as callback function to initialise the + * CLKSEL register for every mmc channel. + */ static void exynos_dwmci_clksel(struct dwmci_host *host) { - u32 val; - val = DWMCI_SET_SAMPLE_CLK(DWMCI_SHIFT_0) | - DWMCI_SET_DRV_CLK(DWMCI_SHIFT_0) | DWMCI_SET_DIV_RATIO(0); + dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val); +} - dwmci_writel(host, DWMCI_CLKSEL, val); +unsigned int exynos_dwmci_get_clk(int dev_index) +{ + return get_mmc_clk(dev_index); } -int exynos_dwmci_init(u32 regbase, int bus_width, int index) +/* + * This function adds the mmc channel to be registered with mmc core. + * index - mmc channel number. + * regbase - register base address of mmc channel specified in 'index'. + * bus_width - operating bus width of mmc channel specified in 'index'. + * clksel - value to be written into CLKSEL register in case of FDT. + * NULL in case od non-FDT. + */ +int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel) { struct dwmci_host *host = NULL; + unsigned int div; + unsigned long freq, sclk; host = malloc(sizeof(struct dwmci_host)); if (!host) { printf("dwmci_host malloc fail!\n"); return 1; } + /* request mmc clock vlaue of 52MHz. */ + freq = 52000000; + sclk = get_mmc_clk(index); + div = DIV_ROUND_UP(sclk, freq); + /* set the clock divisor for mmc */ + set_mmc_clk(index, div); - host->name = EXYNOS_NAME; + host->name = "EXYNOS DWMMC"; host->ioaddr = (void *)regbase; host->buswidth = bus_width; + + if (clksel) { + host->clksel_val = clksel; + } else { + if (0 == index) + host->clksel_val = DWMMC_MMC0_CLKSEL_VAL; + if (2 == index) + host->clksel_val = DWMMC_MMC2_CLKSEL_VAL; + } + host->clksel = exynos_dwmci_clksel; host->dev_index = index; + host->mmc_clk = exynos_dwmci_get_clk; + /* Add the mmc channel to be registered with mmc core */ + if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) { + debug("dwmmc%d registration failed\n", index); + return -1; + } + return 0; +} + +#ifdef CONFIG_OF_CONTROL +int exynos_dwmmc_init(const void *blob) +{ + int index, bus_width; + int node_list[DWMMC_MAX_CH_NUM]; + int err = 0, dev_id, flag, count, i; + u32 clksel_val, base, timing[3]; + + count = fdtdec_find_aliases_for_id(blob, "mmc", + COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list, + DWMMC_MAX_CH_NUM); + + for (i = 0; i < count; i++) { + int node = node_list[i]; + + if (node <= 0) + continue; - add_dwmci(host, 52000000, 400000); + /* Extract device id for each mmc channel */ + dev_id = pinmux_decode_periph_id(blob, node); + /* Get the bus width from the device node */ + bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0); + if (bus_width <= 0) { + debug("DWMMC: Can't get bus-width\n"); + return -1; + } + if (8 == bus_width) + flag = PINMUX_FLAG_8BIT_MODE; + else + flag = PINMUX_FLAG_NONE; + + /* config pinmux for each mmc channel */ + err = exynos_pinmux_config(dev_id, flag); + if (err) { + debug("DWMMC not configured\n"); + return err; + } + + index = dev_id - PERIPH_ID_SDMMC0; + + /* Get the base address from the device node */ + base = fdtdec_get_addr(blob, node, "reg"); + if (!base) { + debug("DWMMC: Can't get base address\n"); + return -1; + } + /* Extract the timing info from the node */ + err = fdtdec_get_int_array(blob, node, "samsung,timing", + timing, 3); + if (err) { + debug("Can't get sdr-timings for divider\n"); + return -1; + } + + clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) | + DWMCI_SET_DRV_CLK(timing[1]) | + DWMCI_SET_DIV_RATIO(timing[2])); + /* Initialise each mmc channel */ + err = exynos_dwmci_add_port(index, base, bus_width, clksel_val); + if (err) + debug("dwmmc Channel-%d init failed\n", index); + } return 0; } - +#endif -- cgit v1.1 From 752f4c4a9c232bba6f27a70db587aebd3dd6bb3f Mon Sep 17 00:00:00 2001 From: Amar Date: Sat, 27 Apr 2013 11:42:57 +0530 Subject: SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT This patch enables and initialises DWMMC for SMDK5250. Supports both FDT and non-FDT. This patch creates a new file 'exynos5-dt.c' meant for FDT support. exynos5-dt.c: This file shall contain all code which supports FDT. Any addition of FDT support for any module needs to be added in this file. smdk5250.c: This file shall contain the code which supports non-FDT. version. Any addition of non-FDT support for any module needs to be added in this file. May be, the file smdk5250.c can be removed in near future when non-FDT is not required. The Makefile is updated to compile only one of the files exynos5-dt.c / smdk5250.c based on FDT configuration. NOTE: Please note that all additions corresponding to FDT need to be added into the file exynos5-dt.c. At same time if non-FDT support is required then add the corresponding updations into smdk5250.c. Signed-off-by: Amar Signed-off-by: Minkyu Kang --- drivers/video/exynos_fb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c index ed0823b..c3606d5 100644 --- a/drivers/video/exynos_fb.c +++ b/drivers/video/exynos_fb.c @@ -319,10 +319,10 @@ void lcd_ctrl_init(void *lcdbase) #ifdef CONFIG_OF_CONTROL if (exynos_fimd_parse_dt(gd->fdt_blob)) debug("Can't get proper panel info\n"); -#endif +#else /* initialize parameters which is specific to panel. */ init_panel_info(&panel_info); - +#endif panel_width = panel_info.vl_width; panel_height = panel_info.vl_height; -- cgit v1.1 From 3690d6d66b8f2d33402ce7c0f0478c8075885291 Mon Sep 17 00:00:00 2001 From: Amar Date: Sat, 27 Apr 2013 11:42:58 +0530 Subject: MMC: APIs to support resize of EMMC boot partition This patch adds APIs to access(open / close) and to resize boot partiton of EMMC. Signed-off-by: Amar Signed-off-by: Minkyu Kang --- drivers/mmc/mmc.c | 134 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 134 insertions(+) (limited to 'drivers') diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 2590f1b..9c0652d 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1374,3 +1374,137 @@ int mmc_initialize(bd_t *bis) return 0; } + +#ifdef CONFIG_SUPPORT_EMMC_BOOT +/* + * This function changes the size of boot partition and the size of rpmb + * partition present on EMMC devices. + * + * Input Parameters: + * struct *mmc: pointer for the mmc device strcuture + * bootsize: size of boot partition + * rpmbsize: size of rpmb partition + * + * Returns 0 on success. + */ + +int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, + unsigned long rpmbsize) +{ + int err; + struct mmc_cmd cmd; + + /* Only use this command for raw EMMC moviNAND. Enter backdoor mode */ + cmd.cmdidx = MMC_CMD_RES_MAN; + cmd.resp_type = MMC_RSP_R1b; + cmd.cmdarg = MMC_CMD62_ARG1; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc_boot_partition_size_change: Error1 = %d\n", err); + return err; + } + + /* Boot partition changing mode */ + cmd.cmdidx = MMC_CMD_RES_MAN; + cmd.resp_type = MMC_RSP_R1b; + cmd.cmdarg = MMC_CMD62_ARG2; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc_boot_partition_size_change: Error2 = %d\n", err); + return err; + } + /* boot partition size is multiple of 128KB */ + bootsize = (bootsize * 1024) / 128; + + /* Arg: boot partition size */ + cmd.cmdidx = MMC_CMD_RES_MAN; + cmd.resp_type = MMC_RSP_R1b; + cmd.cmdarg = bootsize; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc_boot_partition_size_change: Error3 = %d\n", err); + return err; + } + /* RPMB partition size is multiple of 128KB */ + rpmbsize = (rpmbsize * 1024) / 128; + /* Arg: RPMB partition size */ + cmd.cmdidx = MMC_CMD_RES_MAN; + cmd.resp_type = MMC_RSP_R1b; + cmd.cmdarg = rpmbsize; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc_boot_partition_size_change: Error4 = %d\n", err); + return err; + } + return 0; +} + +/* + * This function shall form and send the commands to open / close the + * boot partition specified by user. + * + * Input Parameters: + * ack: 0x0 - No boot acknowledge sent (default) + * 0x1 - Boot acknowledge sent during boot operation + * part_num: User selects boot data that will be sent to master + * 0x0 - Device not boot enabled (default) + * 0x1 - Boot partition 1 enabled for boot + * 0x2 - Boot partition 2 enabled for boot + * access: User selects partitions to access + * 0x0 : No access to boot partition (default) + * 0x1 : R/W boot partition 1 + * 0x2 : R/W boot partition 2 + * 0x3 : R/W Replay Protected Memory Block (RPMB) + * + * Returns 0 on success. + */ +int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access) +{ + int err; + struct mmc_cmd cmd; + + /* Boot ack enable, boot partition enable , boot partition access */ + cmd.cmdidx = MMC_CMD_SWITCH; + cmd.resp_type = MMC_RSP_R1b; + + cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (EXT_CSD_PART_CONF << 16) | + ((EXT_CSD_BOOT_ACK(ack) | + EXT_CSD_BOOT_PART_NUM(part_num) | + EXT_CSD_PARTITION_ACCESS(access)) << 8); + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + if (access) { + debug("mmc boot partition#%d open fail:Error1 = %d\n", + part_num, err); + } else { + debug("mmc boot partition#%d close fail:Error = %d\n", + part_num, err); + } + return err; + } + + if (access) { + /* 4bit transfer mode at booting time. */ + cmd.cmdidx = MMC_CMD_SWITCH; + cmd.resp_type = MMC_RSP_R1b; + + cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (EXT_CSD_BOOT_BUS_WIDTH << 16) | + ((1 << 0) << 8); + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc boot partition#%d open fail:Error2 = %d\n", + part_num, err); + return err; + } + } + return 0; +} +#endif -- cgit v1.1 From 1149ca005a548aff8e65d44634d31db965ed66bd Mon Sep 17 00:00:00 2001 From: Naveen Krishna Chatradhi Date: Fri, 5 Apr 2013 15:21:38 -0700 Subject: power: exynos-tmu: fix warnings and clean up code This patch does the folowing 1. change the data types for unsigned int variable to unsigned 2. change the tmu_base type to struct exynos5_tmu_reg * 3. Add timer functionality for get_cur_temp() 4. error handling in the get_tmu_fdt_values() 5. Add check for curr_temp reading 6. some cosmotic changes. Signed-off-by: Naveen Krishna Chatradhi Reviewed-by: Vadim Bendebury Acked-by: Simon Glass Signed-off-by: Minkyu Kang --- drivers/power/exynos-tmu.c | 112 ++++++++++++++++++++++++++------------------- 1 file changed, 65 insertions(+), 47 deletions(-) (limited to 'drivers') diff --git a/drivers/power/exynos-tmu.c b/drivers/power/exynos-tmu.c index d4b3e65..6d74bc7 100644 --- a/drivers/power/exynos-tmu.c +++ b/drivers/power/exynos-tmu.c @@ -50,15 +50,15 @@ /* Tmeperature threshold values for various thermal events */ struct temperature_params { /* minimum value in temperature code range */ - unsigned int min_val; + unsigned min_val; /* maximum value in temperature code range */ - unsigned int max_val; + unsigned max_val; /* temperature threshold to start warning */ - unsigned int start_warning; + unsigned start_warning; /* temperature threshold CPU tripping */ - unsigned int start_tripping; + unsigned start_tripping; /* temperature threshold for HW tripping */ - unsigned int hardware_tripping; + unsigned hardware_tripping; }; /* Pre-defined values and thresholds for calibration of current temperature */ @@ -66,25 +66,25 @@ struct tmu_data { /* pre-defined temperature thresholds */ struct temperature_params ts; /* pre-defined efuse range minimum value */ - unsigned int efuse_min_value; + unsigned efuse_min_value; /* pre-defined efuse value for temperature calibration */ - unsigned int efuse_value; + unsigned efuse_value; /* pre-defined efuse range maximum value */ - unsigned int efuse_max_value; + unsigned efuse_max_value; /* current temperature sensing slope */ - unsigned int slope; + unsigned slope; }; /* TMU device specific details and status */ struct tmu_info { /* base Address for the TMU */ - unsigned tmu_base; + struct exynos5_tmu_reg *tmu_base; /* pre-defined values for calibration and thresholds */ struct tmu_data data; /* value required for triminfo_25 calibration */ - unsigned int te1; + unsigned te1; /* value required for triminfo_85 calibration */ - unsigned int te2; + unsigned te2; /* Value for measured data calibration */ int dc_value; /* enum value indicating status of the TMU */ @@ -103,17 +103,24 @@ static struct tmu_info gbl_info; */ static int get_cur_temp(struct tmu_info *info) { - int cur_temp; - struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base; + struct exynos5_tmu_reg *reg = info->tmu_base; + ulong start; + int cur_temp = 0; /* * Temperature code range between min 25 and max 125. * May run more than once for first call as initial sensing * has not yet happened. */ - do { - cur_temp = readl(®->current_temp) & 0xff; - } while (cur_temp == 0 && info->tmu_state == TMU_STATUS_NORMAL); + if (info->tmu_state == TMU_STATUS_NORMAL) { + start = get_timer(0); + do { + cur_temp = readl(®->current_temp) & 0xff; + } while ((cur_temp == 0) || (get_timer(start) > 100)); + } + + if (cur_temp == 0) + return cur_temp; /* Calibrate current temperature */ cur_temp = cur_temp - info->te1 + info->dc_value; @@ -137,23 +144,29 @@ enum tmu_status_t tmu_monitor(int *temp) /* Read current temperature of the SOC */ cur_temp = get_cur_temp(&gbl_info); + + if (!cur_temp) + goto out; + *temp = cur_temp; /* Temperature code lies between min 25 and max 125 */ - if (cur_temp >= data->ts.start_tripping && - cur_temp <= data->ts.max_val) { + if ((cur_temp >= data->ts.start_tripping) && + (cur_temp <= data->ts.max_val)) return TMU_STATUS_TRIPPED; - } else if (cur_temp >= data->ts.start_warning) { + + if (cur_temp >= data->ts.start_warning) return TMU_STATUS_WARNING; - } else if (cur_temp < data->ts.start_warning && - cur_temp >= data->ts.min_val) { + + if ((cur_temp < data->ts.start_warning) && + (cur_temp >= data->ts.min_val)) return TMU_STATUS_NORMAL; - } else { - /* Temperature code does not lie between min 25 and max 125 */ - gbl_info.tmu_state = TMU_STATUS_INIT; - debug("EXYNOS_TMU: Thermal reading failed\n"); - return TMU_STATUS_INIT; - } + + out: + /* Temperature code does not lie between min 25 and max 125 */ + gbl_info.tmu_state = TMU_STATUS_INIT; + debug("EXYNOS_TMU: Thermal reading failed\n"); + return TMU_STATUS_INIT; } /* @@ -166,6 +179,7 @@ enum tmu_status_t tmu_monitor(int *temp) static int get_tmu_fdt_values(struct tmu_info *info, const void *blob) { #ifdef CONFIG_OF_CONTROL + fdt_addr_t addr; int node; int error = 0; @@ -183,46 +197,51 @@ static int get_tmu_fdt_values(struct tmu_info *info, const void *blob) * miscalculation of register values in tmu_setup_parameters * may result in misleading current temperature. */ - info->tmu_base = fdtdec_get_addr(blob, node, "reg"); - if (info->tmu_base == FDT_ADDR_T_NONE) { + addr = fdtdec_get_addr(blob, node, "reg"); + if (addr == FDT_ADDR_T_NONE) { debug("%s: Missing tmu-base\n", __func__); return -1; } + info->tmu_base = (struct exynos5_tmu_reg *)addr; + info->data.ts.min_val = fdtdec_get_int(blob, node, "samsung,min-temp", -1); - error |= info->data.ts.min_val; + error |= (info->data.ts.min_val == -1); info->data.ts.max_val = fdtdec_get_int(blob, node, "samsung,max-temp", -1); - error |= info->data.ts.max_val; + error |= (info->data.ts.max_val == -1); info->data.ts.start_warning = fdtdec_get_int(blob, node, "samsung,start-warning", -1); - error |= info->data.ts.start_warning; + error |= (info->data.ts.start_warning == -1); info->data.ts.start_tripping = fdtdec_get_int(blob, node, "samsung,start-tripping", -1); - error |= info->data.ts.start_tripping; + error |= (info->data.ts.start_tripping == -1); info->data.ts.hardware_tripping = fdtdec_get_int(blob, node, "samsung,hw-tripping", -1); - error |= info->data.ts.hardware_tripping; + error |= (info->data.ts.hardware_tripping == -1); info->data.efuse_min_value = fdtdec_get_int(blob, node, "samsung,efuse-min-value", -1); - error |= info->data.efuse_min_value; + error |= (info->data.efuse_min_value == -1); info->data.efuse_value = fdtdec_get_int(blob, node, "samsung,efuse-value", -1); - error |= info->data.efuse_value; + error |= (info->data.efuse_value == -1); info->data.efuse_max_value = fdtdec_get_int(blob, node, "samsung,efuse-max-value", -1); - error |= info->data.efuse_max_value; + error |= (info->data.efuse_max_value == -1); info->data.slope = fdtdec_get_int(blob, node, "samsung,slope", -1); - error |= info->data.slope; + error |= (info->data.slope == -1); info->dc_value = fdtdec_get_int(blob, node, "samsung,dc-value", -1); - error |= info->dc_value; + error |= (info->dc_value == -1); - if (error == -1) { + if (error) { debug("fail to get tmu node properties\n"); return -1; } +#else + /* Non DT support may never be added. Just in case */ + return -1; #endif return 0; @@ -236,12 +255,12 @@ static int get_tmu_fdt_values(struct tmu_info *info, const void *blob) */ static void tmu_setup_parameters(struct tmu_info *info) { - unsigned int te_code, con; - unsigned int warning_code, trip_code, hwtrip_code; - unsigned int cooling_temp; - unsigned int rising_value; + unsigned te_code, con; + unsigned warning_code, trip_code, hwtrip_code; + unsigned cooling_temp; + unsigned rising_value; struct tmu_data *data = &info->data; - struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base; + struct exynos5_tmu_reg *reg = info->tmu_base; /* Must reload for reading efuse value from triminfo register */ writel(TRIMINFO_RELOAD, ®->triminfo_control); @@ -314,6 +333,5 @@ int tmu_init(const void *blob) tmu_setup_parameters(&gbl_info); gbl_info.tmu_state = TMU_STATUS_NORMAL; ret: - return gbl_info.tmu_state; } -- cgit v1.1 From eeb7d6a238f42c5c87892f9849cea00725f6d2d5 Mon Sep 17 00:00:00 2001 From: Naveen Krishna Chatradhi Date: Fri, 5 Apr 2013 15:21:39 -0700 Subject: power: exynos-tmu: use the mux_addr bit fields in tmu_control register This patch implements the mux_addr bit fields defined in tmu_control register (used for debugging purpose) Signed-off-by: Naveen Krishna Chatradhi Reviewed-by: Vadim Bendebury Signed-off-by: Minkyu Kang --- drivers/power/exynos-tmu.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/power/exynos-tmu.c b/drivers/power/exynos-tmu.c index 6d74bc7..9a093a5 100644 --- a/drivers/power/exynos-tmu.c +++ b/drivers/power/exynos-tmu.c @@ -79,6 +79,8 @@ struct tmu_data { struct tmu_info { /* base Address for the TMU */ struct exynos5_tmu_reg *tmu_base; + /* mux Address for the TMU */ + int tmu_mux; /* pre-defined values for calibration and thresholds */ struct tmu_data data; /* value required for triminfo_25 calibration */ @@ -204,6 +206,13 @@ static int get_tmu_fdt_values(struct tmu_info *info, const void *blob) } info->tmu_base = (struct exynos5_tmu_reg *)addr; + /* Optional field. */ + info->tmu_mux = fdtdec_get_int(blob, + node, "samsung,mux", -1); + /* Take default value as per the user manual b(110) */ + if (info->tmu_mux == -1) + info->tmu_mux = 0x6; + info->data.ts.min_val = fdtdec_get_int(blob, node, "samsung,min-temp", -1); error |= (info->data.ts.min_val == -1); @@ -307,7 +316,7 @@ static void tmu_setup_parameters(struct tmu_info *info) /* TMU core enable */ con = readl(®->tmu_control); - con |= THERM_TRIP_EN | CORE_EN; + con |= THERM_TRIP_EN | CORE_EN | (info->tmu_mux << 20); writel(con, ®->tmu_control); -- cgit v1.1 From ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f Mon Sep 17 00:00:00 2001 From: Rajeshwari Shinde Date: Fri, 24 May 2013 18:15:34 +0530 Subject: MMC: DWMMC: Fix FIFO_DEPTH calculation Current DWMMC driver used to give FIFO underrun/overrun error every 3rd time for mmc rescan command. In current code FIFO_DEPTH is getting calculated after reading the default FIFOTH register and extracting the RX_WMARK bits from it i.e (RX_WMARK = FIFO_DEPTH/2 -1). Instead of storing the correct value, we were recalculating the FIFO_DEPT each time which is not correct. Based on "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues" http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/160247 Signed-off-by: Hatim Ali Signed-off-by: Rajeshwari Shinde Acked-by: Simon Glass Tested-by: Simon Glass Acked-by: Jaehoon Chung Acked-by: Andy Fleming Signed-off-by: Minkyu Kang --- drivers/mmc/dw_mmc.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index 1307b12..5da20ed 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -312,7 +312,7 @@ static void dwmci_set_ios(struct mmc *mmc) static int dwmci_init(struct mmc *mmc) { struct dwmci_host *host = (struct dwmci_host *)mmc->priv; - u32 fifo_size, fifoth_val; + u32 fifo_size; dwmci_writel(host, DWMCI_PWREN, 1); @@ -332,15 +332,13 @@ static int dwmci_init(struct mmc *mmc) dwmci_writel(host, DWMCI_IDINTEN, 0); dwmci_writel(host, DWMCI_BMOD, 1); - fifo_size = dwmci_readl(host, DWMCI_FIFOTH); - fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1; - if (host->fifoth_val) { - fifoth_val = host->fifoth_val; - } else { - fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) | + if (!host->fifoth_val) { + fifo_size = dwmci_readl(host, DWMCI_FIFOTH); + fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1; + host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) | TX_WMARK(fifo_size / 2); } - dwmci_writel(host, DWMCI_FIFOTH, fifoth_val); + dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val); dwmci_writel(host, DWMCI_CLKENA, 0); dwmci_writel(host, DWMCI_CLKSRC, 0); -- cgit v1.1