Merge branch 'master' of git://www.denx.de/git/u-boot-net

35 files changed, 361 insertions, 330 deletions

diff --git a/drivers/net/3c589.c b/drivers/net/3c589.c
index 3f1e770..0cf8dff 100644
--- a/drivers/net/3c589.c
+++ b/drivers/net/3c589.c
@@ -26,8 +26,6 @@
 #include <command.h>
 #include <net.h>
 
-#ifdef CONFIG_DRIVER_3C589
-
 #include "3c589.h"
 
 
@@ -514,6 +512,3 @@ int eth_send(volatile void *packet, int length) {
 
 	return length;
 }
-
-
-#endif /* CONFIG_DRIVER_3C589 */
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 5b031c9..84be288 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -25,45 +25,45 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libnet.a
 
-COBJS-y += 3c589.o
-COBJS-y += bcm570x.o bcm570x_autoneg.o 5701rls.o
+COBJS-$(CONFIG_DRIVER_3C589) += 3c589.o
+COBJS-$(CONFIG_BCM570x) += bcm570x.o bcm570x_autoneg.o 5701rls.o
 COBJS-$(CONFIG_BFIN_MAC) += bfin_mac.o
-COBJS-y += cs8900.o
-COBJS-y += dc2114x.o
-COBJS-y += dm9000x.o
-COBJS-y += e1000.o
-COBJS-y += eepro100.o
-COBJS-y += enc28j60.o
-COBJS-y += fsl_mcdmafec.o
+COBJS-$(CONFIG_DRIVER_CS8900) += cs8900.o
+COBJS-$(CONFIG_TULIP) += dc2114x.o
+COBJS-$(CONFIG_DRIVER_DM9000) += dm9000x.o
+COBJS-$(CONFIG_E1000) += e1000.o
+COBJS-$(CONFIG_EEPRO100) += eepro100.o
+COBJS-$(CONFIG_ENC28J60) += enc28j60.o
+COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o
 COBJS-$(CONFIG_GRETH) += greth.o
-COBJS-y += inca-ip_sw.o
-COBJS-y += ks8695eth.o
-COBJS-y += lan91c96.o
-COBJS-y += macb.o
-COBJS-y += mcffec.o
-COBJS-y += natsemi.o
+COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
+COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
+COBJS-$(CONFIG_DRIVER_LAN91C96) += lan91c96.o
+COBJS-$(CONFIG_MACB) += macb.o
+COBJS-$(CONFIG_MCFFEC) += mcffec.o
+COBJS-$(CONFIG_NATSEMI) += natsemi.o
 ifeq ($(CONFIG_DRIVER_NE2000),y)
 COBJS-y += ne2000.o
 COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o
 endif
-COBJS-y += netarm_eth.o
-COBJS-y += netconsole.o
-COBJS-y += ns7520_eth.o
-COBJS-y += ns8382x.o
-COBJS-y += ns9750_eth.o
-COBJS-y += pcnet.o
-COBJS-y += plb2800_eth.o
-COBJS-y += rtl8019.o
-COBJS-y += rtl8139.o
-COBJS-y += rtl8169.o
-COBJS-y += s3c4510b_eth.o
-COBJS-y += smc91111.o
-COBJS-y += smc911x.o
-COBJS-y += tigon3.o
-COBJS-y += tsec.o
-COBJS-y += tsi108_eth.o
-COBJS-y += uli526x.o
-COBJS-y += vsc7385.o
+COBJS-$(CONFIG_DRIVER_NETARMETH) += netarm_eth.o
+COBJS-$(CONFIG_NETCONSOLE) += netconsole.o
+COBJS-$(CONFIG_DRIVER_NS7520_ETHERNET) += ns7520_eth.o
+COBJS-$(CONFIG_NS8382X) += ns8382x.o
+COBJS-$(CONFIG_DRIVER_NS9750_ETHERNET) += ns9750_eth.o
+COBJS-$(CONFIG_PCNET) += pcnet.o
+COBJS-$(CONFIG_PLB2800_ETHER) += plb2800_eth.o
+COBJS-$(CONFIG_DRIVER_RTL8019) += rtl8019.o
+COBJS-$(CONFIG_RTL8139) += rtl8139.o
+COBJS-$(CONFIG_RTL8169) += rtl8169.o
+COBJS-$(CONFIG_DRIVER_S3C4510_ETH) += s3c4510b_eth.o
+COBJS-$(CONFIG_DRIVER_SMC91111) += smc91111.o
+COBJS-$(CONFIG_DRIVER_SMC911X) += smc911x.o
+COBJS-$(CONFIG_TIGON3) += tigon3.o bcm570x_autoneg.o 5701rls.o
+COBJS-$(CONFIG_TSEC_ENET) += tsec.o
+COBJS-$(CONFIG_TSI108_ETH) += tsi108_eth.o
+COBJS-$(CONFIG_ULI526X) += uli526x.o
+COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o
 COBJS-$(CONFIG_XILINX_EMAC) += xilinx_emac.o
 COBJS-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
 
diff --git a/drivers/net/bcm570x.c b/drivers/net/bcm570x.c
index 5ad31d1..6b28b95 100644
--- a/drivers/net/bcm570x.c
+++ b/drivers/net/bcm570x.c
@@ -6,9 +6,6 @@
 
 #include <common.h>
 
-#if defined(CONFIG_CMD_NET) \
-	&& (!defined(CONFIG_NET_MULTI)) && defined(CONFIG_BCM570x)
-
 #ifdef CONFIG_BMW
 #include <mpc824x.h>
 #endif
@@ -1599,5 +1596,3 @@ PQQ_ENTRY QQ_GetTail (PQQ_CONTAINER pQueue, unsigned int Idx)
 
 	return pQueue->Array[Idx];
 }
-
-#endif
diff --git a/drivers/net/cs8900.c b/drivers/net/cs8900.c
index 458b517..ae1983a 100644
--- a/drivers/net/cs8900.c
+++ b/drivers/net/cs8900.c
@@ -41,10 +41,6 @@
 #include "cs8900.h"
 #include <net.h>
 
-#ifdef CONFIG_DRIVER_CS8900
-
-#if defined(CONFIG_CMD_NET)
-
 #undef DEBUG
 
 /* packet page register access functions */
@@ -315,7 +311,3 @@ int cs8900_e2prom_write(unsigned char addr, unsigned short value)
 
 	return 0;
 }
-
-#endif	/* CONFIG_CMD_NET */
-
-#endif	/* CONFIG_DRIVER_CS8900 */
diff --git a/drivers/net/dc2114x.c b/drivers/net/dc2114x.c
index 1d728d8..8117239 100644
--- a/drivers/net/dc2114x.c
+++ b/drivers/net/dc2114x.c
@@ -19,10 +19,6 @@
  */
 
 #include <common.h>
-
-#if defined(CONFIG_CMD_NET) \
-	&& defined(CONFIG_NET_MULTI) && defined(CONFIG_TULIP)
-
 #include <malloc.h>
 #include <net.h>
 #include <pci.h>
@@ -766,5 +762,3 @@ static void update_srom(struct eth_device *dev, bd_t *bis)
 	}
 }
 #endif	/* UPDATE_SROM */
-
-#endif
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 68901cd..844fb76 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -36,7 +36,24 @@ v1.2   03/18/2003       Weilun Huang <weilun_huang@davicom.com.tw>:
 
 --------------------------------------
 
-       12/15/2003       Initial port to u-boot by Sascha Hauer <saschahauer@web.de>
+       12/15/2003       Initial port to u-boot by
+       			Sascha Hauer <saschahauer@web.de>
+
+       06/03/2008	Remy Bohmer <linux@bohmer.net>
+			- Fixed the driver to work with DM9000A.
+			  (check on ISR receive status bit before reading the
+			  FIFO as described in DM9000 programming guide and
+			  application notes)
+			- Added autodetect of databus width.
+			- Made debug code compile again.
+			- Adapt eth_send such that it matches the DM9000*
+			  application notes. Needed to make it work properly
+			  for DM9000A.
+			- Adapted reset procedure to match DM9000 application
+			  notes (i.e. double reset)
+			- some minor code cleanups
+			These changes are tested with DM9000{A,EP,E} together
+			with a 200MHz Atmel AT91SAM92161 core
 
 TODO: Homerun NIC and longrun NIC are not functional, only internal at the
       moment.
@@ -47,8 +64,6 @@ TODO: Homerun NIC and longrun NIC are not functional, only internal at the
 #include <net.h>
 #include <asm/io.h>
 
-#ifdef CONFIG_DRIVER_DM9000
-
 #include "dm9000x.h"
 
 /* Board/System/Debug information/definition ---------------- */
@@ -59,10 +74,22 @@ TODO: Homerun NIC and longrun NIC are not functional, only internal at the
 /* #define CONFIG_DM9000_DEBUG */
 
 #ifdef CONFIG_DM9000_DEBUG
-#define DM9000_DBG(fmt,args...) printf(fmt ,##args)
-#else				/*  */
+#define DM9000_DBG(fmt,args...) printf(fmt, ##args)
+#define DM9000_DMP_PACKET(func,packet,length)  \
+	do { \
+		int i; 							\
+		printf(func ": length: %d\n", length);			\
+		for (i = 0; i < length; i++) {				\
+			if (i % 8 == 0)					\
+				printf("\n%s: %02x: ", func, i);	\
+			printf("%02x ", ((unsigned char *) packet)[i]);	\
+		} printf("\n");						\
+	} while(0)
+#else
 #define DM9000_DBG(fmt,args...)
-#endif				/*  */
+#define DM9000_DMP_PACKET(func,packet,length)
+#endif
+
 enum DM9000_PHY_mode { DM9000_10MHD = 0, DM9000_100MHD =
 	    1, DM9000_10MFD = 4, DM9000_100MFD = 5, DM9000_AUTO =
 	    8, DM9000_1M_HPNA = 0x10
@@ -84,8 +111,11 @@ typedef struct board_info {
 	u8 device_wait_reset;	/* device state */
 	u8 nic_type;		/* NIC type */
 	unsigned char srom[128];
+	void (*outblk)(volatile void *data_ptr, int count);
+	void (*inblk)(void *data_ptr, int count);
+	void (*rx_status)(u16 *RxStatus, u16 *RxLen);
 } board_info_t;
-board_info_t dmfe_info;
+static board_info_t dm9000_info;
 
 /* For module input parameter */
 static int media_mode = DM9000_AUTO;
@@ -124,10 +154,85 @@ dump_regs(void)
 	DM9000_DBG("TSRII (0x04): %02x\n", DM9000_ior(4));
 	DM9000_DBG("RCR   (0x05): %02x\n", DM9000_ior(5));
 	DM9000_DBG("RSR   (0x06): %02x\n", DM9000_ior(6));
-	DM9000_DBG("ISR   (0xFE): %02x\n", DM9000_ior(ISR));
+	DM9000_DBG("ISR   (0xFE): %02x\n", DM9000_ior(DM9000_ISR));
 	DM9000_DBG("\n");
 }
-#endif				/*  */
+#endif
+
+static void dm9000_outblk_8bit(volatile void *data_ptr, int count)
+{
+	int i;
+	for (i = 0; i < count; i++)
+		DM9000_outb((((u8 *) data_ptr)[i] & 0xff), DM9000_DATA);
+}
+
+static void dm9000_outblk_16bit(volatile void *data_ptr, int count)
+{
+	int i;
+	u32 tmplen = (count + 1) / 2;
+
+	for (i = 0; i < tmplen; i++)
+		DM9000_outw(((u16 *) data_ptr)[i], DM9000_DATA);
+}
+static void dm9000_outblk_32bit(volatile void *data_ptr, int count)
+{
+	int i;
+	u32 tmplen = (count + 3) / 4;
+
+	for (i = 0; i < tmplen; i++)
+		DM9000_outl(((u32 *) data_ptr)[i], DM9000_DATA);
+}
+
+static void dm9000_inblk_8bit(void *data_ptr, int count)
+{
+	int i;
+	for (i = 0; i < count; i++)
+		((u8 *) data_ptr)[i] = DM9000_inb(DM9000_DATA);
+}
+
+static void dm9000_inblk_16bit(void *data_ptr, int count)
+{
+	int i;
+	u32 tmplen = (count + 1) / 2;
+
+	for (i = 0; i < tmplen; i++)
+		((u16 *) data_ptr)[i] = DM9000_inw(DM9000_DATA);
+}
+static void dm9000_inblk_32bit(void *data_ptr, int count)
+{
+	int i;
+	u32 tmplen = (count + 3) / 4;
+
+	for (i = 0; i < tmplen; i++)
+		((u32 *) data_ptr)[i] = DM9000_inl(DM9000_DATA);
+}
+
+static void dm9000_rx_status_32bit(u16 *RxStatus, u16 *RxLen)
+{
+	u32 tmpdata;
+
+	DM9000_outb(DM9000_MRCMD, DM9000_IO);
+
+	tmpdata = DM9000_inl(DM9000_DATA);
+	*RxStatus = tmpdata;
+	*RxLen = tmpdata >> 16;
+}
+
+static void dm9000_rx_status_16bit(u16 *RxStatus, u16 *RxLen)
+{
+	DM9000_outb(DM9000_MRCMD, DM9000_IO);
+
+	*RxStatus = DM9000_inw(DM9000_DATA);
+	*RxLen = DM9000_inw(DM9000_DATA);
+}
+
+static void dm9000_rx_status_8bit(u16 *RxStatus, u16 *RxLen)
+{
+	DM9000_outb(DM9000_MRCMD, DM9000_IO);
+
+	*RxStatus = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
+	*RxLen = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
+}
 
 /*
   Search DM9000 board, allocate space and register it
@@ -236,7 +341,7 @@ program_dm9802(void)
 static void
 identify_nic(void)
 {
-	struct board_info *db = &dmfe_info;	/* Point a board information structure */
+	struct board_info *db = &dm9000_info;
 	u16 phy_reg3;
 	DM9000_iow(DM9000_NCR, NCR_EXT_PHY);
 	phy_reg3 = phy_read(3);
@@ -263,9 +368,35 @@ identify_nic(void)
 static void
 dm9000_reset(void)
 {
-	DM9000_DBG("resetting\n");
-	DM9000_iow(DM9000_NCR, NCR_RST);
-	udelay(1000);		/* delay 1ms */
+	DM9000_DBG("resetting DM9000\n");
+
+	/* Reset DM9000,
+	   see DM9000 Application Notes V1.22 Jun 11, 2004 page 29 */
+
+	/* DEBUG: Make all GPIO pins outputs */
+	DM9000_iow(DM9000_GPCR, 0x0F);
+	/* Step 1: Power internal PHY by writing 0 to GPIO0 pin */
+	DM9000_iow(DM9000_GPR, 0);
+	/* Step 2: Software reset */
+	DM9000_iow(DM9000_NCR, 3);
+
+	do {
+		DM9000_DBG("resetting the DM9000, 1st reset\n");
+		udelay(25); /* Wait at least 20 us */
+	} while (DM9000_ior(DM9000_NCR) & 1);
+
+	DM9000_iow(DM9000_NCR, 0);
+	DM9000_iow(DM9000_NCR, 3); /* Issue a second reset */
+
+	do {
+		DM9000_DBG("resetting the DM9000, 2nd reset\n");
+		udelay(25); /* Wait at least 20 us */
+	} while (DM9000_ior(DM9000_NCR) & 1);
+
+	/* Check whether the ethernet controller is present */
+	if ((DM9000_ior(DM9000_PIDL) != 0x0) ||
+	    (DM9000_ior(DM9000_PIDH) != 0x90))
+		printf("ERROR: resetting DM9000 -> not responding\n");
 }
 
 /* Initilize dm9000 board
@@ -274,12 +405,46 @@ int
 eth_init(bd_t * bd)
 {
 	int i, oft, lnk;
+	u8 io_mode;
+	struct board_info *db = &dm9000_info;
+
 	DM9000_DBG("eth_init()\n");
 
 	/* RESET device */
 	dm9000_reset();
 	dm9000_probe();
 
+	/* Auto-detect 8/16/32 bit mode, ISR Bit 6+7 indicate bus width */
+	io_mode = DM9000_ior(DM9000_ISR) >> 6;
+
+	switch (io_mode) {
+	case 0x0:  /* 16-bit mode */
+		printf("DM9000: running in 16 bit mode\n");
+		db->outblk    = dm9000_outblk_16bit;
+		db->inblk     = dm9000_inblk_16bit;
+		db->rx_status = dm9000_rx_status_16bit;
+		break;
+	case 0x01:  /* 32-bit mode */
+		printf("DM9000: running in 32 bit mode\n");
+		db->outblk    = dm9000_outblk_32bit;
+		db->inblk     = dm9000_inblk_32bit;
+		db->rx_status = dm9000_rx_status_32bit;
+		break;
+	case 0x02: /* 8 bit mode */
+		printf("DM9000: running in 8 bit mode\n");
+		db->outblk    = dm9000_outblk_8bit;
+		db->inblk     = dm9000_inblk_8bit;
+		db->rx_status = dm9000_rx_status_8bit;
+		break;
+	default:
+		/* Assume 8 bit mode, will probably not work anyway */
+		printf("DM9000: Undefined IO-mode:0x%x\n", io_mode);
+		db->outblk    = dm9000_outblk_8bit;
+		db->inblk     = dm9000_inblk_8bit;
+		db->rx_status = dm9000_rx_status_8bit;
+		break;
+	}
+
 	/* NIC Type: FASTETHER, HOMERUN, LONGRUN */
 	identify_nic();
 
@@ -289,15 +454,22 @@ eth_init(bd_t * bd)
 	/* Set PHY */
 	set_PHY_mode();
 
-	/* Program operating register */
-	DM9000_iow(DM9000_NCR, 0x0);	/* only intern phy supported by now */
-	DM9000_iow(DM9000_TCR, 0);	/* TX Polling clear */
-	DM9000_iow(DM9000_BPTR, 0x3f);	/* Less 3Kb, 200us */
-	DM9000_iow(DM9000_FCTR, FCTR_HWOT(3) | FCTR_LWOT(8));	/* Flow Control : High/Low Water */
-	DM9000_iow(DM9000_FCR, 0x0);	/* SH FIXME: This looks strange! Flow Control */
-	DM9000_iow(DM9000_SMCR, 0);	/* Special Mode */
-	DM9000_iow(DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END);	/* clear TX status */
-	DM9000_iow(DM9000_ISR, 0x0f);	/* Clear interrupt status */
+	/* Program operating register, only intern phy supported by now */
+	DM9000_iow(DM9000_NCR, 0x0);
+	/* TX Polling clear */
+	DM9000_iow(DM9000_TCR, 0);
+	/* Less 3Kb, 200us */
+	DM9000_iow(DM9000_BPTR, 0x3f);
+	/* Flow Control : High/Low Water */
+	DM9000_iow(DM9000_FCTR, FCTR_HWOT(3) | FCTR_LWOT(8));
+	/* SH FIXME: This looks strange! Flow Control */
+	DM9000_iow(DM9000_FCR, 0x0);
+	/* Special Mode */
+	DM9000_iow(DM9000_SMCR, 0);
+	/* clear TX status */
+	DM9000_iow(DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END);
+	/* Clear interrupt status */
+	DM9000_iow(DM9000_ISR, 0x0f);
 
 	/* Set Node address */
 #ifndef CONFIG_AT91SAM9261EK
@@ -333,8 +505,11 @@ eth_init(bd_t * bd)
 	DM9000_DBG("\n");
 
 	/* Activate DM9000 */
-	DM9000_iow(DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN);	/* RX enable */
-	DM9000_iow(DM9000_IMR, IMR_PAR);	/* Enable TX/RX interrupt mask */
+	/* RX enable */
+	DM9000_iow(DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN);
+	/* Enable TX/RX interrupt mask */
+	DM9000_iow(DM9000_IMR, IMR_PAR);
+
 	i = 0;
 	while (!(phy_read(1) & 0x20)) {	/* autonegation complete bit */
 		udelay(1000);
@@ -376,54 +551,37 @@ eth_init(bd_t * bd)
 int
 eth_send(volatile void *packet, int length)
 {
-	char *data_ptr;
-	u32 tmplen, i;
 	int tmo;
-	DM9000_DBG("eth_send: length: %d\n", length);
-	for (i = 0; i < length; i++) {
-		if (i % 8 == 0)
-			DM9000_DBG("\nSend: 02x: ", i);
-		DM9000_DBG("%02x ", ((unsigned char *) packet)[i]);
-	} DM9000_DBG("\n");
-
-	/* Move data to DM9000 TX RAM */
-	data_ptr = (char *) packet;
-	DM9000_outb(DM9000_MWCMD, DM9000_IO);
+	struct board_info *db = &dm9000_info;
 
-#ifdef CONFIG_DM9000_USE_8BIT
-	/* Byte mode */
-	for (i = 0; i < length; i++)
-		DM9000_outb((data_ptr[i] & 0xff), DM9000_DATA);
+	DM9000_DMP_PACKET("eth_send", packet, length);
 
-#endif				/*  */
-#ifdef CONFIG_DM9000_USE_16BIT
-	tmplen = (length + 1) / 2;
-	for (i = 0; i < tmplen; i++)
-		DM9000_outw(((u16 *) data_ptr)[i], DM9000_DATA);
+	DM9000_iow(DM9000_ISR, IMR_PTM); /* Clear Tx bit in ISR */
 
-#endif				/*  */
-#ifdef CONFIG_DM9000_USE_32BIT
-	tmplen = (length + 3) / 4;
-	for (i = 0; i < tmplen; i++)
-		DM9000_outl(((u32 *) data_ptr)[i], DM9000_DATA);
+	/* Move data to DM9000 TX RAM */
+	DM9000_outb(DM9000_MWCMD, DM9000_IO); /* Prepare for TX-data */
 
-#endif				/*  */
+	/* push the data to the TX-fifo */
+	(db->outblk)(packet, length);
 
 	/* Set TX length to DM9000 */
 	DM9000_iow(DM9000_TXPLL, length & 0xff);
 	DM9000_iow(DM9000_TXPLH, (length >> 8) & 0xff);
 
 	/* Issue TX polling command */
-	DM9000_iow(DM9000_TCR, TCR_TXREQ);	/* Cleared after TX complete */
+	DM9000_iow(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
 
 	/* wait for end of transmission */
 	tmo = get_timer(0) + 5 * CFG_HZ;
-	while (DM9000_ior(DM9000_TCR) & TCR_TXREQ) {
+	while ( !(DM9000_ior(DM9000_NSR) & (NSR_TX1END | NSR_TX2END)) ||
+		!(DM9000_ior(DM9000_ISR) & IMR_PTM) ) {
 		if (get_timer(0) >= tmo) {
 			printf("transmission timeout\n");
 			break;
 		}
 	}
+	DM9000_iow(DM9000_ISR, IMR_PTM); /* Clear Tx bit in ISR */
+
 	DM9000_DBG("transmit done\n\n");
 	return 0;
 }
@@ -452,86 +610,67 @@ eth_rx(void)
 {
 	u8 rxbyte, *rdptr = (u8 *) NetRxPackets[0];
 	u16 RxStatus, RxLen = 0;
-	u32 tmplen, i;
-#ifdef CONFIG_DM9000_USE_32BIT
-	u32 tmpdata;
-#endif
+	struct board_info *db = &dm9000_info;
 
-	/* Check packet ready or not */
-	DM9000_ior(DM9000_MRCMDX);	/* Dummy read */
-	rxbyte = DM9000_inb(DM9000_DATA);	/* Got most updated data */
-	if (rxbyte == 0)
+	/* Check packet ready or not, we must check
+	   the ISR status first for DM9000A */
+	if (!(DM9000_ior(DM9000_ISR) & 0x01)) /* Rx-ISR bit must be set. */
 		return 0;
 
-	/* Status check: this byte must be 0 or 1 */
-	if (rxbyte > 1) {
-		DM9000_iow(DM9000_RCR, 0x00);	/* Stop Device */
-		DM9000_iow(DM9000_ISR, 0x80);	/* Stop INT request */
-		DM9000_DBG("rx status check: %d\n", rxbyte);
-	}
-	DM9000_DBG("receiving packet\n");
-
-	/* A packet ready now  & Get status/length */
-	DM9000_outb(DM9000_MRCMD, DM9000_IO);
+	DM9000_iow(DM9000_ISR, 0x01); /* clear PR status latched in bit 0 */
 
-#ifdef CONFIG_DM9000_USE_8BIT
-	RxStatus = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
-	RxLen = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
-
-#endif				/*  */
-#ifdef CONFIG_DM9000_USE_16BIT
-	RxStatus = DM9000_inw(DM9000_DATA);
-	RxLen = DM9000_inw(DM9000_DATA);
-
-#endif				/*  */
-#ifdef CONFIG_DM9000_USE_32BIT
-	tmpdata = DM9000_inl(DM9000_DATA);
-	RxStatus = tmpdata;
-	RxLen = tmpdata >> 16;
+	/* There is _at least_ 1 package in the fifo, read them all */
+	for (;;) {
+		DM9000_ior(DM9000_MRCMDX);	/* Dummy read */
 
-#endif				/*  */
-	DM9000_DBG("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen);
+		/* Get most updated data,
+		   only look at bits 0:1, See application notes DM9000 */
+		rxbyte = DM9000_inb(DM9000_DATA) & 0x03;
 
-	/* Move data from DM9000 */
-	/* Read received packet from RX SRAM */
-#ifdef CONFIG_DM9000_USE_8BIT
-	for (i = 0; i < RxLen; i++)
-		rdptr[i] = DM9000_inb(DM9000_DATA);
-
-#endif				/*  */
-#ifdef CONFIG_DM9000_USE_16BIT
-	tmplen = (RxLen + 1) / 2;
-	for (i = 0; i < tmplen; i++)
-		((u16 *) rdptr)[i] = DM9000_inw(DM9000_DATA);
+		/* Status check: this byte must be 0 or 1 */
+		if (rxbyte > DM9000_PKT_RDY) {
+			DM9000_iow(DM9000_RCR, 0x00);	/* Stop Device */
+			DM9000_iow(DM9000_ISR, 0x80);	/* Stop INT request */
+			printf("DM9000 error: status check fail: 0x%x\n",
+				rxbyte);
+			return 0;
+		}
 
-#endif				/*  */
-#ifdef CONFIG_DM9000_USE_32BIT
-	tmplen = (RxLen + 3) / 4;
-	for (i = 0; i < tmplen; i++)
-		((u32 *) rdptr)[i] = DM9000_inl(DM9000_DATA);
+		if (rxbyte != DM9000_PKT_RDY)
+			return 0; /* No packet received, ignore */
+
+		DM9000_DBG("receiving packet\n");
+
+		/* A packet ready now  & Get status/length */
+		(db->rx_status)(&RxStatus, &RxLen);
+
+		DM9000_DBG("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen);
+
+		/* Move data from DM9000 */
+		/* Read received packet from RX SRAM */
+		(db->inblk)(rdptr, RxLen);
+
+		if ((RxStatus & 0xbf00) || (RxLen < 0x40)
+			|| (RxLen > DM9000_PKT_MAX)) {
+			if (RxStatus & 0x100) {
+				printf("rx fifo error\n");
+			}
+			if (RxStatus & 0x200) {
+				printf("rx crc error\n");
+			}
+			if (RxStatus & 0x8000) {
+				printf("rx length error\n");
+			}
+			if (RxLen > DM9000_PKT_MAX) {
+				printf("rx length too big\n");
+				dm9000_reset();
+			}
+		} else {
+			DM9000_DMP_PACKET("eth_rx", rdptr, RxLen);
 
-#endif				/*  */
-	if ((RxStatus & 0xbf00) || (RxLen < 0x40)
-	    || (RxLen > DM9000_PKT_MAX)) {
-		if (RxStatus & 0x100) {
-			printf("rx fifo error\n");
+			DM9000_DBG("passing packet to upper layer\n");
+			NetReceive(NetRxPackets[0], RxLen);
 		}
-		if (RxStatus & 0x200) {
-			printf("rx crc error\n");
-		}
-		if (RxStatus & 0x8000) {
-			printf("rx length error\n");
-		}
-		if (RxLen > DM9000_PKT_MAX) {
-			printf("rx length too big\n");
-			dm9000_reset();
-		}
-	} else {
-
-		/* Pass to upper layer */
-		DM9000_DBG("passing packet to upper layer\n");
-		NetReceive(NetRxPackets[0], RxLen);
-		return RxLen;
 	}
 	return 0;
 }
@@ -592,12 +731,12 @@ phy_read(int reg)
 	/* Fill the phyxcer register into REG_0C */
 	DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
 	DM9000_iow(DM9000_EPCR, 0xc);	/* Issue phyxcer read command */
-	udelay(100);		/* Wait read complete */
+	udelay(100);			/* Wait read complete */
 	DM9000_iow(DM9000_EPCR, 0x0);	/* Clear phyxcer read command */
 	val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL);
 
 	/* The read data keeps on REG_0D & REG_0E */
-	DM9000_DBG("phy_read(%d): %d\n", reg, val);
+	DM9000_DBG("phy_read(0x%x): 0x%x\n", reg, val);
 	return val;
 }
 
@@ -615,8 +754,7 @@ phy_write(int reg, u16 value)
 	DM9000_iow(DM9000_EPDRL, (value & 0xff));
 	DM9000_iow(DM9000_EPDRH, ((value >> 8) & 0xff));
 	DM9000_iow(DM9000_EPCR, 0xa);	/* Issue phyxcer write command */
-	udelay(500);		/* Wait write complete */
+	udelay(500);			/* Wait write complete */
 	DM9000_iow(DM9000_EPCR, 0x0);	/* Clear phyxcer write command */
-	DM9000_DBG("phy_write(reg:%d, value:%d)\n", reg, value);
+	DM9000_DBG("phy_write(reg:0x%x, value:0x%x)\n", reg, value);
 }
-#endif				/* CONFIG_DRIVER_DM9000 */
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index c53c226..c31029a 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -44,9 +44,6 @@ tested on both gig copper and gig fiber boards
 
 #include "e1000.h"
 
-#if defined(CONFIG_CMD_NET) \
-	&& defined(CONFIG_NET_MULTI) && defined(CONFIG_E1000)
-
 #define TOUT_LOOP   100000
 
 #undef	virt_to_bus
@@ -83,6 +80,7 @@ static struct pci_device_id supported[] = {
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82546EB_FIBER},
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82540EM_LOM},
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82541ER},
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82541GI_LF},
 };
 
 /* Function forward declarations */
@@ -646,6 +644,7 @@ e1000_set_mac_type(struct e1000_hw *hw)
 		hw->mac_type = e1000_82546;
 		break;
 	case E1000_DEV_ID_82541ER:
+	case E1000_DEV_ID_82541GI_LF:
 		hw->mac_type = e1000_82541_rev_2;
 		break;
 	default:
@@ -3059,5 +3058,3 @@ e1000_initialize(bd_t * bis)
 	}
 	return 1;
 }
-
-#endif
diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
index 851467d..23b2eb9 100644
--- a/drivers/net/e1000.h
+++ b/drivers/net/e1000.h
@@ -222,7 +222,8 @@ struct e1000_phy_stats {
 #define E1000_DEV_ID_82546EB_COPPER 0x1010
 #define E1000_DEV_ID_82546EB_FIBER  0x1012
 #define E1000_DEV_ID_82541ER	    0x1078
-#define NUM_DEV_IDS 14
+#define E1000_DEV_ID_82541GI_LF	    0x107C
+#define NUM_DEV_IDS 15
 
 #define NODE_ADDRESS_SIZE 6
 #define ETH_LENGTH_OF_ADDRESS 6
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index 96ed271..9de0fb5 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -30,9 +30,6 @@
 
 #undef DEBUG
 
-#if defined(CONFIG_CMD_NET) \
-	&& defined(CONFIG_NET_MULTI) && defined(CONFIG_EEPRO100)
-
 	/* Ethernet chip registers.
 	 */
 #define SCBStatus		0	/* Rx/Command Unit Status *Word* */
@@ -944,5 +941,3 @@ static void read_hw_addr (struct eth_device *dev, bd_t * bis)
 #endif
 	}
 }
-
-#endif
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 98303ac..5c24b0d 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -17,7 +17,6 @@
 
 #include <config.h>
 #include <common.h>
-#ifdef CONFIG_ENC28J60
 #include <net.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/spi.h>
@@ -979,5 +978,3 @@ static void phyWrite(unsigned char addr, unsigned short data)
 		}
 	}
 }
-
-#endif /* CONFIG_ENC28J60 */
diff --git a/drivers/net/fsl_mcdmafec.c b/drivers/net/fsl_mcdmafec.c
index 2ef91f2..f2bdba6 100644
--- a/drivers/net/fsl_mcdmafec.c
+++ b/drivers/net/fsl_mcdmafec.c
@@ -31,7 +31,6 @@
 #include <net.h>
 #include <miiphy.h>
 
-#ifdef CONFIG_FSLDMAFEC
 #undef	ET_DEBUG
 #undef	MII_DEBUG
 
@@ -49,7 +48,6 @@
 #define BD_ENET_RX_ERR	(BD_ENET_RX_LG | BD_ENET_RX_NO | BD_ENET_RX_CR | \
 			 BD_ENET_RX_OV | BD_ENET_RX_TR)
 
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
 #include <asm/immap.h>
 #include <asm/fsl_mcdmafec.h>
 
@@ -586,6 +584,3 @@ int mcdmafec_initialize(bd_t * bis)
 
 	return 1;
 }
-
-#endif				/* CONFIG_CMD_NET && CONFIG_NET_MULTI */
-#endif				/* CONFIG_FSLDMAFEC */
diff --git a/drivers/net/inca-ip_sw.c b/drivers/net/inca-ip_sw.c
index e4aaed6..ffdd1f3 100644
--- a/drivers/net/inca-ip_sw.c
+++ b/drivers/net/inca-ip_sw.c
@@ -26,9 +26,6 @@
 
 #include <common.h>
 
-#if defined(CONFIG_CMD_NET) \
-	&& defined(CONFIG_NET_MULTI) && defined(CONFIG_INCA_IP_SWITCH)
-
 #include <malloc.h>
 #include <net.h>
 #include <asm/inca-ip.h>
@@ -813,5 +810,3 @@ Fail:
 	return -1;
 }
 #endif /* CONFIG_INCA_IP_SWITCH_AMDIX */
-
-#endif
diff --git a/drivers/net/ks8695eth.c b/drivers/net/ks8695eth.c
index b598dd7..7f3e0c2 100644
--- a/drivers/net/ks8695eth.c
+++ b/drivers/net/ks8695eth.c
@@ -21,8 +21,6 @@
 /****************************************************************************/
 
 #include <common.h>
-
-#ifdef	CONFIG_DRIVER_KS8695ETH
 #include <malloc.h>
 #include <net.h>
 #include <asm/io.h>
@@ -234,5 +232,3 @@ int eth_send(volatile void *packet, int len)
 
 	return len;
 }
-
-#endif	/* CONFIG_DRIVER_KS8695ETH */
diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
index 51cfb7e..c23a400 100644
--- a/drivers/net/lan91c96.c
+++ b/drivers/net/lan91c96.c
@@ -63,10 +63,6 @@
 #include "lan91c96.h"
 #include <net.h>
 
-#ifdef CONFIG_DRIVER_LAN91C96
-
-#if defined(CONFIG_CMD_NET)
-
 /*------------------------------------------------------------------------
  *
  * Configuration options, for the experienced user to change.
@@ -865,9 +861,6 @@ static int smc_hw_init ()
 }
 #endif /* 0 */
 
-#endif /* CONFIG_CMD_NET */
-
-
 /* smc_get_ethaddr (bd_t * bd)
  *
  * This checks both the environment and the ROM for an ethernet address. If
@@ -963,5 +956,3 @@ int get_rom_mac (unsigned char *v_rom_mac)
 	return (1);
 #endif
 }
-
-#endif /* CONFIG_DRIVER_LAN91C96 */
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index e5733f6..aa39284 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -17,9 +17,6 @@
  */
 #include <common.h>
 
-#if defined(CONFIG_MACB) \
-	&& (defined(CONFIG_CMD_NET) || defined(CONFIG_CMD_MII))
-
 /*
  * The u-boot networking stack is a little weird.  It seems like the
  * networking core allocates receive buffers up front without any
@@ -593,5 +590,3 @@ int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
 }
 
 #endif
-
-#endif /* CONFIG_MACB */
diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c
index 5ab4726..58ed5e3 100644
--- a/drivers/net/mcffec.c
+++ b/drivers/net/mcffec.c
@@ -27,8 +27,6 @@
 #include <common.h>
 #include <malloc.h>
 
-#ifdef CONFIG_MCFFEC
-
 #include <asm/fec.h>
 #include <asm/immap.h>
 
@@ -51,8 +49,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-
 struct fec_info_s fec_info[] = {
 #ifdef CFG_FEC0_IOBASE
 	{
@@ -125,11 +121,17 @@ void setFecDuplexSpeed(volatile fec_t * fecp, bd_t * bd, int dup_spd)
 	}
 
 	if ((dup_spd & 0xFFFF) == _100BASET) {
+#ifdef CONFIG_MCF5445x
+		fecp->rcr &= ~0x200;	/* disabled 10T base */
+#endif
 #ifdef MII_DEBUG
 		printf("100Mbps\n");
 #endif
 		bd->bi_ethspeed = 100;
 	} else {
+#ifdef CONFIG_MCF5445x
+		fecp->rcr |= 0x200;	/* enabled 10T base */
+#endif
 #ifdef MII_DEBUG
 		printf("10Mbps\n");
 #endif
@@ -599,6 +601,3 @@ int mcffec_initialize(bd_t * bis)
 
 	return 1;
 }
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
-#endif				/* CONFIG_MCFFEC */
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index a523959..4aee048 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -56,9 +56,6 @@
 #include <asm/io.h>
 #include <pci.h>
 
-#if defined(CONFIG_CMD_NET) \
-	&& defined(CONFIG_NET_MULTI) && defined(CONFIG_NATSEMI)
-
 /* defines */
 #define EEPROM_SIZE 0xb /*12 16-bit chunks, or 24 bytes*/
 
@@ -878,5 +875,3 @@ natsemi_disable(struct eth_device *dev)
 	/* Restore PME enable bit */
 	OUTL(dev, SavedClkRun, ClkRun);
 }
-
-#endif
diff --git a/drivers/net/netarm_eth.c b/drivers/net/netarm_eth.c
index ecf45dc..c011809 100644
--- a/drivers/net/netarm_eth.c
+++ b/drivers/net/netarm_eth.c
@@ -22,15 +22,11 @@
 
 
 #include <common.h>
-
-#ifdef CONFIG_DRIVER_NETARMETH
 #include <command.h>
 #include <net.h>
 #include "netarm_eth.h"
 #include <asm/arch/netarm_registers.h>
 
-#if defined(CONFIG_CMD_NET)
-
 static int na_mii_poll_busy (void);
 
 static void na_get_mac_addr (void)
@@ -352,7 +348,3 @@ extern int eth_send (volatile void *packet, int length)
 	printf ("eth_send timeout\n");
 	return 1;
 }
-
-#endif /* CONFIG_CMD_NET */
-
-#endif /* CONFIG_DRIVER_NETARMETH */
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index 69089f9..b2ee5ea 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -22,9 +22,6 @@
  */
 
 #include <common.h>
-
-#ifdef CONFIG_NETCONSOLE
-
 #include <command.h>
 #include <devices.h>
 #include <net.h>
@@ -263,5 +260,3 @@ int drv_nc_init (void)
 
 	return (rc == 0) ? 1 : rc;
 }
-
-#endif	/* CONFIG_NETCONSOLE */
diff --git a/drivers/net/ns7520_eth.c b/drivers/net/ns7520_eth.c
index a5a20df..37411df 100644
--- a/drivers/net/ns7520_eth.c
+++ b/drivers/net/ns7520_eth.c
@@ -15,8 +15,6 @@
 
 #include <common.h>
 
-#if defined(CONFIG_DRIVER_NS7520_ETHERNET)
-
 #include <net.h>		/* NetSendPacket */
 #include <asm/arch/netarm_registers.h>
 #include <asm/arch/netarm_dma_module.h>
@@ -846,14 +844,11 @@ extern int ns7520_miiphy_write(char *devname, unsigned char const addr,
 	return (ret);
 }
 #endif				/* defined(CONFIG_MII) */
-#endif				/* CONFIG_DRIVER_NS7520_ETHERNET */
 
 int ns7520_miiphy_initialize(bd_t *bis)
 {
-#if defined(CONFIG_DRIVER_NS7520_ETHERNET)
 #if defined(CONFIG_MII)
 	miiphy_register("ns7520phy", ns7520_miiphy_read, ns7520_miiphy_write);
 #endif
-#endif
 	return 0;
 }
diff --git a/drivers/net/ns8382x.c b/drivers/net/ns8382x.c
index c807dd4..0b9a3ae 100644
--- a/drivers/net/ns8382x.c
+++ b/drivers/net/ns8382x.c
@@ -56,9 +56,6 @@
 #include <asm/io.h>
 #include <pci.h>
 
-#if defined(CONFIG_CMD_NET) \
-	&& defined(CONFIG_NET_MULTI) && defined(CONFIG_NS8382X)
-
 /* defines */
 #define DSIZE     0x00000FFF
 #define ETH_ALEN		6
@@ -859,5 +856,3 @@ ns8382x_disable(struct eth_device *dev)
 	/* Restore PME enable bit */
 	OUTL(dev, SavedClkRun, ClkRun);
 }
-
-#endif
diff --git a/drivers/net/ns9750_eth.c b/drivers/net/ns9750_eth.c
index 067ff8e..0559710 100644
--- a/drivers/net/ns9750_eth.c
+++ b/drivers/net/ns9750_eth.c
@@ -37,8 +37,6 @@
 
 #include "ns9750_eth.h"		/* for Ethernet and PHY */
 
-#ifdef CONFIG_DRIVER_NS9750_ETHERNET
-
 /* some definition to make transistion to linux easier */
 
 #define NS9750_DRIVER_NAME	"eth"
@@ -793,5 +791,3 @@ static unsigned int ns9750_mii_poll_busy (void)
 
 	return unTimeout;
 }
-
-#endif /* CONFIG_DRIVER_NS9750_ETHERNET */
diff --git a/drivers/net/pcnet.c b/drivers/net/pcnet.c
index aa04e8f..a4f0214 100644
--- a/drivers/net/pcnet.c
+++ b/drivers/net/pcnet.c
@@ -45,9 +45,6 @@
 #define PCNET_DEBUG2(fmt,args...)
 #endif
 
-#if defined(CONFIG_CMD_NET) \
-	&& defined(CONFIG_NET_MULTI) && defined(CONFIG_PCNET)
-
 #if !defined(CONF_PCNET_79C973) && defined(CONF_PCNET_79C975)
 #error "Macro for PCnet chip version is not defined!"
 #endif
@@ -537,4 +534,3 @@ static void pcnet_halt (struct eth_device *dev)
 		printf ("%s: TIMEOUT: controller reset failed\n", dev->name);
 	}
 }
-#endif
diff --git a/drivers/net/plb2800_eth.c b/drivers/net/plb2800_eth.c
index b8cc57a..dad842c 100644
--- a/drivers/net/plb2800_eth.c
+++ b/drivers/net/plb2800_eth.c
@@ -24,10 +24,6 @@
  */
 
 #include <common.h>
-
-#if defined(CONFIG_CMD_NET) \
-	&& defined(CONFIG_NET_MULTI) && defined(CONFIG_PLB2800_ETHER)
-
 #include <malloc.h>
 #include <net.h>
 #include <asm/addrspace.h>
@@ -392,5 +388,3 @@ static unsigned char * plb2800_get_mac_addr(void)
 
 	return addr;
 }
-
-#endif /* CONFIG_PLB2800_ETHER */
diff --git a/drivers/net/rtl8019.c b/drivers/net/rtl8019.c
index 9d62cab..3ddf917 100644
--- a/drivers/net/rtl8019.c
+++ b/drivers/net/rtl8019.c
@@ -32,10 +32,6 @@
 #include "rtl8019.h"
 #include <net.h>
 
-#ifdef CONFIG_DRIVER_RTL8019
-
-#if defined(CONFIG_CMD_NET)
-
 /* packet page register access functions */
 
 static unsigned char get_reg (unsigned int regno)
@@ -271,7 +267,3 @@ extern int eth_send (volatile void *packet, int length)
 
 	return 0;
 }
-
-#endif /* CONFIG_CMD_NET */
-
-#endif /* CONFIG_DRIVER_RTL8019 */
diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c
index 097f684..4fd20ac 100644
--- a/drivers/net/rtl8139.c
+++ b/drivers/net/rtl8139.c
@@ -77,9 +77,6 @@
 #include <asm/io.h>
 #include <pci.h>
 
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
-	defined(CONFIG_RTL8139)
-
 #define RTL_TIMEOUT	100000
 
 #define ETH_FRAME_LEN		1514
@@ -545,4 +542,3 @@ static void rtl_disable(struct eth_device *dev)
 		udelay (100); /* wait 100us */
 	}
 }
-#endif
diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index 6c4c9ff..7423bc0 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -58,9 +58,6 @@
 #include <asm/io.h>
 #include <pci.h>
 
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
-	defined(CONFIG_RTL8169)
-
 #undef DEBUG_RTL8169
 #undef DEBUG_RTL8169_TX
 #undef DEBUG_RTL8169_RX
@@ -887,5 +884,3 @@ int rtl8169_initialize(bd_t *bis)
 	}
 	return card_number;
 }
-
-#endif
diff --git a/drivers/net/s3c4510b_eth.c b/drivers/net/s3c4510b_eth.c
index 3d9066a..6dcb244 100644
--- a/drivers/net/s3c4510b_eth.c
+++ b/drivers/net/s3c4510b_eth.c
@@ -25,9 +25,6 @@
  */
 
 #include <common.h>
-
-#ifdef CONFIG_DRIVER_S3C4510_ETH
-
 #include <command.h>
 #include <net.h>
 #include <asm/hardware.h>
@@ -242,5 +239,3 @@ void eth_halt(void)
 	/* disable MAC */
 	PUT_REG( REG_MACCON, ETH_HaltReg);
 }
-
-#endif
diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c
index 8061f12..e8b235b 100644
--- a/drivers/net/smc91111.c
+++ b/drivers/net/smc91111.c
@@ -65,8 +65,6 @@
 #include "smc91111.h"
 #include <net.h>
 
-#ifdef CONFIG_DRIVER_SMC91111
-
 /* Use power-down feature of the chip */
 #define POWER_DOWN	0
 
@@ -1620,4 +1618,3 @@ int get_rom_mac (uchar *v_rom_mac)
 	return (valid_mac ? 1 : 0);
 #endif
 }
-#endif /* CONFIG_DRIVER_SMC91111 */
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 5302cb5..7555cb9 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -23,13 +23,16 @@
  */
 
 #include <common.h>
-
-#ifdef CONFIG_DRIVER_SMC911X
-
 #include <command.h>
 #include <net.h>
 #include <miiphy.h>
 
+#if defined (CONFIG_DRIVER_SMC911X_32_BIT) && \
+	defined (CONFIG_DRIVER_SMC911X_16_BIT)
+#error "SMC911X: Only one of CONFIG_DRIVER_SMC911X_32_BIT and \
+	CONFIG_DRIVER_SMC911X_16_BIT shall be set"
+#endif
+
 #ifdef CONFIG_DRIVER_SMC911X_32_BIT
 static inline u32 reg_read(u32 addr)
 {
@@ -39,9 +42,20 @@ static inline void reg_write(u32 addr, u32 val)
 {
 	*(volatile u32*)addr = val;
 }
+#elif CONFIG_DRIVER_SMC911X_16_BIT
+static inline u32 reg_read(u32 addr)
+{
+	volatile u16 *addr_16 = (u16 *)addr;
+	return ((*addr_16 & 0x0000ffff) | (*(addr_16 + 1) << 16));
+}
+static inline void reg_write(u32 addr, u32 val)
+{
+	*(volatile u16*)addr = (u16)val;
+	*(volatile u16*)(addr + 2) = (u16)(val >> 16);
+}
 #else
-#error "SMC911X: Only 32-bit bus is supported"
-#endif
+#error "SMC911X: undefined bus width"
+#endif /* CONFIG_DRIVER_SMC911X_16_BIT */
 
 #define mdelay(n)       udelay((n)*1000)
 
@@ -682,5 +696,3 @@ int eth_rx(void)
 
 	return 0;
 }
-
-#endif				/* CONFIG_DRIVER_SMC911X */
diff --git a/drivers/net/tigon3.c b/drivers/net/tigon3.c
index 5f6a4ec..ab448b0 100644
--- a/drivers/net/tigon3.c
+++ b/drivers/net/tigon3.c
@@ -12,8 +12,7 @@
 /******************************************************************************/
 #include <common.h>
 #include <asm/types.h>
-#if defined(CONFIG_CMD_NET) && !defined(CONFIG_NET_MULTI) && \
-	defined(CONFIG_TIGON3)
+
 #ifdef CONFIG_BMW
 #include <mpc824x.h>
 #endif
@@ -5695,5 +5694,3 @@ LM_DmaTest (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pBufferVirt,
 	}
 	return LM_STATUS_SUCCESS;
 }
-
-#endif
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index c7af930..6e0f2c6 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -17,7 +17,6 @@
 #include <net.h>
 #include <command.h>
 
-#if defined(CONFIG_TSEC_ENET)
 #include "tsec.h"
 #include "miiphy.h"
 
@@ -1128,6 +1127,36 @@ struct phy_info phy_info_M88E1111S = {
 			   },
 };
 
+struct phy_info phy_info_M88E1118 = {
+	0x01410e1,
+	"Marvell 88E1118",
+	4,
+	(struct phy_cmd[]){	/* config */
+		/* Reset and configure the PHY */
+		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+		{0x16, 0x0002, NULL}, /* Change Page Number */
+		{0x15, 0x1070, NULL}, /* Delay RGMII TX and RX */
+		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+		{miim_end,}
+		},
+	(struct phy_cmd[]){	/* startup */
+		{0x16, 0x0000, NULL}, /* Change Page Number */
+		/* Status is read once to clear old link state */
+		{MIIM_STATUS, miim_read, NULL},
+		/* Auto-negotiate */
+		/* Read the status */
+		{MIIM_88E1011_PHY_STATUS, miim_read,
+		 &mii_parse_88E1011_psr},
+		{miim_end,}
+		},
+	(struct phy_cmd[]){	/* shutdown */
+		{miim_end,}
+		},
+};
+
 static unsigned int m88e1145_setmode(uint mii_reg, struct tsec_private *priv)
 {
 	uint mii_data = read_phy_reg(priv, mii_reg);
@@ -1492,6 +1521,7 @@ struct phy_info *phy_info[] = {
 	&phy_info_BCM5464S,
 	&phy_info_M88E1011S,
 	&phy_info_M88E1111S,
+	&phy_info_M88E1118,
 	&phy_info_M88E1145,
 	&phy_info_M88E1149S,
 	&phy_info_dm9161,
@@ -1710,5 +1740,3 @@ tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set)
 	return 0;
 }
 #endif /* Multicast TFTP ? */
-
-#endif /* CONFIG_TSEC_ENET */
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index a09115e..57c0dc3 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -27,9 +27,6 @@
 
 #include <config.h>
 
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) \
-	&& defined(CONFIG_TSI108_ETH)
-
 #if !defined(CONFIG_TSI108_ETH_NUM_PORTS) || (CONFIG_TSI108_ETH_NUM_PORTS > 2)
 #error "CONFIG_TSI108_ETH_NUM_PORTS must be defined as 1 or 2"
 #endif
@@ -1032,5 +1029,3 @@ static void tsi108_eth_halt (struct eth_device *dev)
 	/* Put MAC into reset state. */
 	reg_MAC_CONFIG_1(base) = MAC_CONFIG_1_SOFT_RESET;
 }
-
-#endif
diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c
index 79d29ae..7145b72 100644
--- a/drivers/net/uli526x.c
+++ b/drivers/net/uli526x.c
@@ -22,9 +22,6 @@
 
 /* some kernel function compatible define */
 
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
-	defined(CONFIG_ULI526X)
-
 #undef DEBUG
 
 /* Board/System/Debug information/definition */
@@ -993,4 +990,3 @@ static void set_mac_addr(struct eth_device *dev)
 	udelay(10);
 	return;
 }
-#endif
diff --git a/drivers/net/vsc7385.c b/drivers/net/vsc7385.c
index 4095bce..4e7259f 100644
--- a/drivers/net/vsc7385.c
+++ b/drivers/net/vsc7385.c
@@ -13,9 +13,6 @@
  */
 
 #include <config.h>
-
-#ifdef CONFIG_VSC7385_ENET
-
 #include <common.h>
 #include <asm/io.h>
 #include <asm/errno.h>
@@ -97,5 +94,3 @@ int vsc7385_upload_firmware(void *firmware, unsigned int size)
 
 	return 0;
 }
-
-#endif