summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2011-11-16 20:24:41 +0100
committerWolfgang Denk <wd@denx.de>2011-11-16 20:24:41 +0100
commit0c2dd9a05bdcf3b2b4880509ec690116873fe158 (patch)
tree3deccd6143aa75c52096154f8f165feacb57fe56 /drivers/usb
parent3844d1c782f9f3a5c72ccdbd4fa141f9c03d1121 (diff)
parent75acc4d7c1c9081e06d1197c6da01361cf1bce92 (diff)
downloadu-boot-imx-0c2dd9a05bdcf3b2b4880509ec690116873fe158.zip
u-boot-imx-0c2dd9a05bdcf3b2b4880509ec690116873fe158.tar.gz
u-boot-imx-0c2dd9a05bdcf3b2b4880509ec690116873fe158.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: arm, davinci: add DAVINCI_MMC_CLKID arm, davinci_emac: fix driver bug if more then 3 PHYs are detected arm, davinci: da850/dm365 lowlevel cleanup omap5: Add omap5_evm board build support. omap4/5: Add support for booting with CH. omap5: emif: Add emif/ddr configurations required for omap5 evm omap5: clocks: Add clocks support for omap5 platform. omap5: Add minimal support for omap5430. omap: Checkpatch fixes omap4: make omap4 code common for future reuse GCC4.6: Squash warnings in onenand_base.c GCC4.6: Fix common/usb.c on xscale OneNAND: Add simple OneNAND SPL PXA: vpac270: Enable the new generic MMC driver PXA: Cleanup serial_pxa PXA: Drop csb226 and innokom boards (unmaintained) m28evk: Fix comment about the number of RAM banks mx31: Fix checkpatch warnings in generic.c mx31: Use proper IO accessor for GPR register mx31: Remove duplicate definition for GPR register qong: Use generic function for configuring GPR register M28EVK: Enable USB HOST support iMX28: Add USB HOST driver iMX28: Add USB and USB PHY register definitions M28: Add memory detection into SPL iMX28: Fix ARM vector handling M28: Add doc/README.m28 documentation M28: Add MMC SPL iMX28: Add support for DENX M28EVK board iMX28: Add u-boot.sb target to Makefile iMX28: Add image header generator tool iMX28: Add driver for internal RTC iMX28: Add GPMI NAND driver iMX28: Add APBH DMA driver iMX28: Add SPI driver iMX28: Add GPIO control iMX28: Add I2C bus driver iMX28: Add PINMUX control FEC: Add support for iMX28 quirks iMX28: Add SSP MMC driver iMX28: Initial support for iMX28 CPU MX25: zmx25: GCC4.6 fix build warnings da850: add new config file for AM18xx BeagleBoard: config: Switch to ttyO2 OMAP3: Change omap3_evm maintainer devkit8000: Fix NAND SPL on boards with 256MB NAND integrator: enable Vpp and disable flash protection integrator: add system controller header integrator: make flash writeable on boot integrator: use io-accessors for board init integrator: move text offset to config integrator: pass configs for core modules ARM: remove superfluous setting of arch_number in board specific code. SPL: Allow ARM926EJS to avoid compiling in the CPU support code integrator: do not test first part of the memory arm: a320: fix broken timer ARM: define CONFIG_MACH_TYPE for all ronetix boards dm646x: pass board revision info to kernel dm646x: add new configuration for dm6467T arm, davinci: Fix setting of the SDRAM configuration register arm, davinci: Remove the duplication of LPSC functions arm, davinci: Rename AM1808 lowlevel functions to DA850 da8xxevm: fix build error ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/host/Makefile1
-rw-r--r--drivers/usb/host/ehci-mxs.c154
2 files changed, 155 insertions, 0 deletions
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 51b2494..09abb75 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -41,6 +41,7 @@ else
COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
endif
COBJS-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
+COBJS-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
COBJS-$(CONFIG_USB_EHCI_KIRKWOOD) += ehci-kirkwood.o
diff --git a/drivers/usb/host/ehci-mxs.c b/drivers/usb/host/ehci-mxs.c
new file mode 100644
index 0000000..c795f23
--- /dev/null
+++ b/drivers/usb/host/ehci-mxs.c
@@ -0,0 +1,154 @@
+/*
+ * Freescale i.MX28 USB Host driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/regs-usb.h>
+#include <asm/arch/regs-usbphy.h>
+
+#include "ehci-core.h"
+#include "ehci.h"
+
+#if (CONFIG_EHCI_MXS_PORT != 0) && (CONFIG_EHCI_MXS_PORT != 1)
+#error "MXS EHCI: Invalid port selected!"
+#endif
+
+#ifndef CONFIG_EHCI_MXS_PORT
+#error "MXS EHCI: Please define correct port using CONFIG_EHCI_MXS_PORT!"
+#endif
+
+static struct ehci_mxs {
+ struct mx28_usb_regs *usb_regs;
+ struct mx28_usbphy_regs *phy_regs;
+} ehci_mxs;
+
+int mxs_ehci_get_port(struct ehci_mxs *mxs_usb, int port)
+{
+ uint32_t usb_base, phy_base;
+ switch (port) {
+ case 0:
+ usb_base = MXS_USBCTRL0_BASE;
+ phy_base = MXS_USBPHY0_BASE;
+ break;
+ case 1:
+ usb_base = MXS_USBCTRL1_BASE;
+ phy_base = MXS_USBPHY1_BASE;
+ break;
+ default:
+ printf("CONFIG_EHCI_MXS_PORT (port = %d)\n", port);
+ return -1;
+ }
+
+ mxs_usb->usb_regs = (struct mx28_usb_regs *)usb_base;
+ mxs_usb->phy_regs = (struct mx28_usbphy_regs *)phy_base;
+ return 0;
+}
+
+/* This DIGCTL register ungates clock to USB */
+#define HW_DIGCTL_CTRL 0x8001c000
+#define HW_DIGCTL_CTRL_USB0_CLKGATE (1 << 2)
+#define HW_DIGCTL_CTRL_USB1_CLKGATE (1 << 16)
+
+int ehci_hcd_init(void)
+{
+
+ int ret;
+ uint32_t usb_base, cap_base;
+ struct mx28_register *digctl_ctrl =
+ (struct mx28_register *)HW_DIGCTL_CTRL;
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT);
+ if (ret)
+ return ret;
+
+ /* Reset the PHY block */
+ writel(USBPHY_CTRL_SFTRST, &ehci_mxs.phy_regs->hw_usbphy_ctrl_set);
+ udelay(10);
+ writel(USBPHY_CTRL_SFTRST | USBPHY_CTRL_CLKGATE,
+ &ehci_mxs.phy_regs->hw_usbphy_ctrl_clr);
+
+ /* Enable USB clock */
+ writel(CLKCTRL_PLL0CTRL0_EN_USB_CLKS | CLKCTRL_PLL0CTRL0_POWER,
+ &clkctrl_regs->hw_clkctrl_pll0ctrl0_set);
+ writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS | CLKCTRL_PLL1CTRL0_POWER,
+ &clkctrl_regs->hw_clkctrl_pll1ctrl0_set);
+
+ writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE,
+ &digctl_ctrl->reg_clr);
+
+ /* Start USB PHY */
+ writel(0, &ehci_mxs.phy_regs->hw_usbphy_pwd);
+
+ /* Enable UTMI+ Level 2 and Level 3 compatibility */
+ writel(USBPHY_CTRL_ENUTMILEVEL3 | USBPHY_CTRL_ENUTMILEVEL2 | 1,
+ &ehci_mxs.phy_regs->hw_usbphy_ctrl_set);
+
+ usb_base = ((uint32_t)ehci_mxs.usb_regs) + 0x100;
+ hccr = (struct ehci_hccr *)usb_base;
+
+ cap_base = ehci_readl(&hccr->cr_capbase);
+ hcor = (struct ehci_hcor *)(usb_base + HC_LENGTH(cap_base));
+
+ return 0;
+}
+
+int ehci_hcd_stop(void)
+{
+ int ret;
+ uint32_t tmp;
+ struct mx28_register *digctl_ctrl =
+ (struct mx28_register *)HW_DIGCTL_CTRL;
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT);
+ if (ret)
+ return ret;
+
+ /* Stop the USB port */
+ tmp = ehci_readl(&hcor->or_usbcmd);
+ tmp &= ~CMD_RUN;
+ ehci_writel(tmp, &hcor->or_usbcmd);
+
+ /* Disable the PHY */
+ tmp = USBPHY_PWD_RXPWDRX | USBPHY_PWD_RXPWDDIFF |
+ USBPHY_PWD_RXPWD1PT1 | USBPHY_PWD_RXPWDENV |
+ USBPHY_PWD_TXPWDV2I | USBPHY_PWD_TXPWDIBIAS |
+ USBPHY_PWD_TXPWDFS;
+ writel(tmp, &ehci_mxs.phy_regs->hw_usbphy_pwd);
+
+ /* Disable USB clock */
+ writel(CLKCTRL_PLL0CTRL0_EN_USB_CLKS,
+ &clkctrl_regs->hw_clkctrl_pll0ctrl0_clr);
+ writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS,
+ &clkctrl_regs->hw_clkctrl_pll1ctrl0_clr);
+
+ /* Gate off the USB clock */
+ writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE,
+ &digctl_ctrl->reg_set);
+
+ return 0;
+}