Merge branch 'master' of git://git.denx.de/u-boot

5 files changed, 31 insertions, 4 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index ddb725d..ac5920a 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -109,6 +109,27 @@ config DEBUG_UART_SHIFT
 	  value. Use this value to specify the shift to use, where 0=byte
 	  registers, 2=32-bit word registers, etc.
 
+config DEBUG_UART_BOARD_INIT
+	bool "Enable board-specific debug UART init"
+	depends on DEBUG_UART
+	help
+	  Some boards need to set things up before the debug UART can be used.
+	  On these boards a call to debug_uart_init() is insufficient. When
+	  this option is enabled, the function board_debug_uart_init() will
+	  be called when debug_uart_init() is called. You can put any code
+	  here that is needed to set up the UART ready for use, such as set
+	  pin multiplexing or enable clocks.
+
+config DEBUG_UART_ANNOUNCE
+	bool "Show a message when the debug UART starts up"
+	depends on DEBUG_UART
+	help
+	  Enable this option to show a message when the debug UART is ready
+	  for use. You will see a message like "<debug_uart> " as soon as
+	  U-Boot has the UART ready for use (i.e. your code calls
+	  debug_uart_init()). This can be useful just as a check that
+	  everything is working.
+
 config ROCKCHIP_SERIAL
 	bool "Rockchip on-chip UART support"
 	depends on ARCH_ROCKCHIP && DM_SERIAL
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 6275a11..6433844 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -257,7 +257,7 @@ int NS16550_tstc(NS16550_t com_port)
 			(1 << CONFIG_DEBUG_UART_SHIFT), \
 		CONFIG_DEBUG_UART_SHIFT)
 
-void debug_uart_init(void)
+static inline void _debug_uart_init(void)
 {
 	struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
 	int baud_divisor;
diff --git a/drivers/serial/serial_efi.c b/drivers/serial/serial_efi.c
index cf57d89..ea25c25 100644
--- a/drivers/serial/serial_efi.c
+++ b/drivers/serial/serial_efi.c
@@ -107,7 +107,7 @@ static int serial_efi_pending(struct udevice *dev, bool input)
  * There is nothing to init here since the EFI console is already running by
  * the time we enter U-Boot.
  */
-void debug_uart_init(void)
+static inline void _debug_uart_init(void)
 {
 }
 
diff --git a/drivers/serial/serial_omap.c b/drivers/serial/serial_omap.c
index e8d544f..891cd7b 100644
--- a/drivers/serial/serial_omap.c
+++ b/drivers/serial/serial_omap.c
@@ -12,10 +12,16 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz */
+
 #if CONFIG_IS_ENABLED(OF_CONTROL)
 static const struct udevice_id omap_serial_ids[] = {
+	{ .compatible = "ti,omap2-uart" },
 	{ .compatible = "ti,omap3-uart" },
 	{ .compatible = "ti,omap4-uart" },
+	{ .compatible = "ti,am3352-uart" },
+	{ .compatible = "ti,am4372-uart" },
+	{ .compatible = "ti,dra742-uart" },
 	{ }
 };
 
@@ -28,7 +34,7 @@ static int omap_serial_ofdata_to_platdata(struct udevice *dev)
 	if (ret)
 		return ret;
 	plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
-				     "clock-frequency", -1);
+				     "clock-frequency", DEFAULT_CLK_SPEED);
 	plat->reg_shift = 2;
 
 	return 0;
diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
index 3f0b588..feba467 100644
--- a/drivers/serial/serial_s5p.c
+++ b/drivers/serial/serial_s5p.c
@@ -207,7 +207,7 @@ U_BOOT_DRIVER(serial_s5p) = {
 
 #include <debug_uart.h>
 
-void debug_uart_init(void)
+static inline void _debug_uart_init(void)
 {
 	struct s5p_uart *uart = (struct s5p_uart *)CONFIG_DEBUG_UART_BASE;