summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
authorSimon Glass <sjg@chromium.org>2015-01-26 18:27:07 -0700
committerSimon Glass <sjg@chromium.org>2015-02-19 06:20:25 -0700
commit2f964aa7b1bf7de50587a1864cf60d187ebefb2c (patch)
tree327538419b445e03d57685b0cce6f518577c42a6 /drivers/serial
parentba25779384671c533a778e53d59fe3f317bfefa8 (diff)
downloadu-boot-imx-2f964aa7b1bf7de50587a1864cf60d187ebefb2c.zip
u-boot-imx-2f964aa7b1bf7de50587a1864cf60d187ebefb2c.tar.gz
u-boot-imx-2f964aa7b1bf7de50587a1864cf60d187ebefb2c.tar.bz2
serial: Support an early UART for debugging
This came up in a discussion on the mailing list here: https://patchwork.ozlabs.org/patch/384613/ My concerns at the time were: - it doesn't need to be written in assembler - it doesn't need to be ARM-specific This patch provides a possible alternative. It works by allowing any serial driver to export one init function and provide a putc() function. These can be used to output debug data before the real serial driver is available. This implementation does not depend on driver model, and it is possible for it to operate without a stack on some architectures (e.g. PowerPC, ARM). It provides the same features as the ARM-specific debug.S but with more UART and architecture support. Signed-off-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/Kconfig46
1 files changed, 46 insertions, 0 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index c94353b..6313258 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -7,6 +7,52 @@ config DM_SERIAL
implements serial_putc() etc. The uclass interface is
defined in include/serial.h.
+config DEBUG_UART
+ bool "Enable an early debug UART for debugging"
+ help
+ The debug UART is intended for use very early in U-Boot to debug
+ problems when an ICE or other debug mechanism is not available.
+
+ To use it you should:
+ - Make sure your UART supports this interface
+ - Enable CONFIG_DEBUG_UART
+ - Enable the CONFIG for your UART to tell it to provide this interface
+ (e.g. CONFIG_DEBUG_UART_NS16550)
+ - Define the required settings as needed (see below)
+ - Call debug_uart_init() before use
+ - Call debug_uart_putc() to output a character
+
+ Depending on your platform it may be possible to use this UART before
+ a stack is available.
+
+ If your UART does not support this interface you can probably add
+ support quite easily. Remember that you cannot use driver model and
+ it is preferred to use no stack.
+
+ You must not use this UART once driver model is working and the
+ serial drivers are up and running (done in serial_init()). Otherwise
+ the drivers may conflict and you will get strange output.
+
+config DEBUG_UART_BASE
+ hex "Base address of UART"
+ depends on DEBUG_UART
+ help
+ This is the base address of your UART for memory-mapped UARTs.
+
+ A default should be provided by your board, but if not you will need
+ to use the correct value here.
+
+config DEBUG_UART_CLOCK
+ int "UART input clock"
+ depends on DEBUG_UART
+ help
+ The UART input clock determines the speed of the internal UART
+ circuitry. The baud rate is derived from this by dividing the input
+ clock down.
+
+ A default should be provided by your board, but if not you will need
+ to use the correct value here.
+
config UNIPHIER_SERIAL
bool "UniPhier on-chip UART support"
depends on ARCH_UNIPHIER && DM_SERIAL