Merge git://git.denx.de/u-boot-dm

3 files changed, 27 insertions, 4 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 1fc287e..04541c9 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -15,6 +15,26 @@ config REQUIRE_SERIAL_CONSOLE
 	  during serial port initialization (default y). Set this to n on
 	  boards which have no debug serial port whatsoever.
 
+config SERIAL_PRESENT
+	bool "Provide a serial driver"
+	depends on DM_SERIAL
+	default y
+	help
+	  In very space-constrained devices even the full UART driver is too
+	  large. In this case the debug UART can still be used in some cases.
+	  This option enables the full UART in U-Boot, so if is it disabled,
+	  the full UART driver will be omitted, thus saving space.
+
+config SPL_SERIAL_PRESENT
+	bool "Provide a serial driver in SPL"
+	depends on DM_SERIAL
+	default y
+	help
+	  In very space-constrained devices even the full UART driver is too
+	  large. In this case the debug UART can still be used in some cases.
+	  This option enables the full UART in SPL, so if is it disabled,
+	  the full UART driver will be omitted, thus saving space.
+
 config DM_SERIAL
 	bool "Enable Driver Model for serial drivers"
 	depends on DM
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 3fab3f1..021b211 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -368,7 +368,7 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
 
 	/* try Processor Local Bus device first */
 	addr = dev_get_addr(dev);
-#ifdef CONFIG_PCI
+#if defined(CONFIG_PCI) && defined(CONFIG_DM_PCI)
 	if (addr == FDT_ADDR_T_NONE) {
 		/* then try pci device */
 		struct fdt_pci_addr pci_addr;
@@ -389,8 +389,7 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
 				return ret;
 		}
 
-		ret = fdtdec_get_pci_bar32(gd->fdt_blob, dev->of_offset,
-					   &pci_addr, &bar);
+		ret = fdtdec_get_pci_bar32(dev, &pci_addr, &bar);
 		if (ret)
 			return ret;
 
@@ -440,6 +439,7 @@ static const struct udevice_id ns16550_serial_ids[] = {
 };
 #endif
 
+#if CONFIG_IS_ENABLED(SERIAL_PRESENT)
 U_BOOT_DRIVER(ns16550_serial) = {
 	.name	= "ns16550_serial",
 	.id	= UCLASS_SERIAL,
@@ -453,4 +453,5 @@ U_BOOT_DRIVER(ns16550_serial) = {
 	.ops	= &ns16550_serial_ops,
 	.flags	= DM_FLAG_PRE_RELOC,
 };
+#endif
 #endif /* CONFIG_DM_SERIAL */
diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
index 4bf9a5c..1c447ff 100644
--- a/drivers/serial/serial-uclass.c
+++ b/drivers/serial/serial-uclass.c
@@ -204,7 +204,7 @@ void serial_stdio_init(void)
 {
 }
 
-#ifdef CONFIG_DM_STDIO
+#if defined(CONFIG_DM_STDIO) && CONFIG_IS_ENABLED(SERIAL_PRESENT)
 static void serial_stub_putc(struct stdio_dev *sdev, const char ch)
 {
 	_serial_putc(sdev->priv, ch);
@@ -287,6 +287,7 @@ static int on_baudrate(const char *name, const char *value, enum env_op op,
 }
 U_BOOT_ENV_CALLBACK(baudrate, on_baudrate);
 
+#if CONFIG_IS_ENABLED(SERIAL_PRESENT)
 static int serial_post_probe(struct udevice *dev)
 {
 	struct dm_serial_ops *ops = serial_get_ops(dev);
@@ -356,3 +357,4 @@ UCLASS_DRIVER(serial) = {
 	.pre_remove	= serial_pre_remove,
 	.per_device_auto_alloc_size = sizeof(struct serial_dev_priv),
 };
+#endif