drivers/net : move net drivers to drivers/net

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 1623 insertions, 0 deletions

diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c
new file mode 100644
index 0000000..8061f12
--- /dev/null
+++ b/drivers/net/smc91111.c
@@ -0,0 +1,1623 @@
+/*------------------------------------------------------------------------
+ . smc91111.c
+ . This is a driver for SMSC's 91C111 single-chip Ethernet device.
+ .
+ . (C) Copyright 2002
+ . Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ . Rolf Offermanns <rof@sysgo.de>
+ .
+ . Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
+ .	 Developed by Simple Network Magic Corporation (SNMC)
+ . Copyright (C) 1996 by Erik Stahlman (ES)
+ .
+ . This program is free software; you can redistribute it and/or modify
+ . it under the terms of the GNU General Public License as published by
+ . the Free Software Foundation; either version 2 of the License, or
+ . (at your option) any later version.
+ .
+ . This program is distributed in the hope that it will be useful,
+ . but WITHOUT ANY WARRANTY; without even the implied warranty of
+ . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ . GNU General Public License for more details.
+ .
+ . You should have received a copy of the GNU General Public License
+ . along with this program; if not, write to the Free Software
+ . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307	 USA
+ .
+ . Information contained in this file was obtained from the LAN91C111
+ . manual from SMC.  To get a copy, if you really want one, you can find
+ . information under www.smsc.com.
+ .
+ .
+ . "Features" of the SMC chip:
+ .   Integrated PHY/MAC for 10/100BaseT Operation
+ .   Supports internal and external MII
+ .   Integrated 8K packet memory
+ .   EEPROM interface for configuration
+ .
+ . Arguments:
+ .	io	= for the base address
+ .	irq	= for the IRQ
+ .
+ . author:
+ .	Erik Stahlman				( erik@vt.edu )
+ .	Daris A Nevil				( dnevil@snmc.com )
+ .
+ .
+ . Hardware multicast code from Peter Cammaert ( pc@denkart.be )
+ .
+ . Sources:
+ .    o	  SMSC LAN91C111 databook (www.smsc.com)
+ .    o	  smc9194.c by Erik Stahlman
+ .    o	  skeleton.c by Donald Becker ( becker@cesdis.gsfc.nasa.gov )
+ .
+ . History:
+ .	06/19/03  Richard Woodruff Made u-boot environment aware and added mac addr checks.
+ .	10/17/01  Marco Hasewinkel Modify for DNP/1110
+ .	07/25/01  Woojung Huh	   Modify for ADS Bitsy
+ .	04/25/01  Daris A Nevil	   Initial public release through SMSC
+ .	03/16/01  Daris A Nevil	   Modified smc9194.c for use with LAN91C111
+ ----------------------------------------------------------------------------*/
+
+#include <common.h>
+#include <command.h>
+#include <config.h>
+#include "smc91111.h"
+#include <net.h>
+
+#ifdef CONFIG_DRIVER_SMC91111
+
+/* Use power-down feature of the chip */
+#define POWER_DOWN	0
+
+#define NO_AUTOPROBE
+
+#define SMC_DEBUG 0
+
+#if SMC_DEBUG > 1
+static const char version[] =
+	"smc91111.c:v1.0 04/25/01 by Daris A Nevil (dnevil@snmc.com)\n";
+#endif
+
+/* Autonegotiation timeout in seconds */
+#ifndef CONFIG_SMC_AUTONEG_TIMEOUT
+#define CONFIG_SMC_AUTONEG_TIMEOUT 10
+#endif
+
+/*------------------------------------------------------------------------
+ .
+ . Configuration options, for the experienced user to change.
+ .
+ -------------------------------------------------------------------------*/
+
+/*
+ . Wait time for memory to be free.  This probably shouldn't be
+ . tuned that much, as waiting for this means nothing else happens
+ . in the system
+*/
+#define MEMORY_WAIT_TIME 16
+
+
+#if (SMC_DEBUG > 2 )
+#define PRINTK3(args...) printf(args)
+#else
+#define PRINTK3(args...)
+#endif
+
+#if SMC_DEBUG > 1
+#define PRINTK2(args...) printf(args)
+#else
+#define PRINTK2(args...)
+#endif
+
+#ifdef SMC_DEBUG
+#define PRINTK(args...) printf(args)
+#else
+#define PRINTK(args...)
+#endif
+
+
+/*------------------------------------------------------------------------
+ .
+ . The internal workings of the driver.	 If you are changing anything
+ . here with the SMC stuff, you should have the datasheet and know
+ . what you are doing.
+ .
+ -------------------------------------------------------------------------*/
+#define CARDNAME "LAN91C111"
+
+/* Memory sizing constant */
+#define LAN91C111_MEMORY_MULTIPLIER	(1024*2)
+
+#ifndef CONFIG_SMC91111_BASE
+#define CONFIG_SMC91111_BASE 0x20000300
+#endif
+
+#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
+
+#define SMC_DEV_NAME "SMC91111"
+#define SMC_PHY_ADDR 0x0000
+#define SMC_ALLOC_MAX_TRY 5
+#define SMC_TX_TIMEOUT 30
+
+#define SMC_PHY_CLOCK_DELAY 1000
+
+#define ETH_ZLEN 60
+
+#ifdef	CONFIG_SMC_USE_32_BIT
+#define USE_32_BIT  1
+#else
+#undef USE_32_BIT
+#endif
+/*-----------------------------------------------------------------
+ .
+ .  The driver can be entered at any of the following entry points.
+ .
+ .------------------------------------------------------------------  */
+
+extern int eth_init(bd_t *bd);
+extern void eth_halt(void);
+extern int eth_rx(void);
+extern int eth_send(volatile void *packet, int length);
+
+#ifdef SHARED_RESOURCES
+	extern void swap_to(int device_id);
+#endif
+
+/*
+ . This is called by  register_netdev().  It is responsible for
+ . checking the portlist for the SMC9000 series chipset.  If it finds
+ . one, then it will initialize the device, find the hardware information,
+ . and sets up the appropriate device parameters.
+ . NOTE: Interrupts are *OFF* when this procedure is called.
+ .
+ . NB:This shouldn't be static since it is referred to externally.
+*/
+int smc_init(void);
+
+/*
+ . This is called by  unregister_netdev().  It is responsible for
+ . cleaning up before the driver is finally unregistered and discarded.
+*/
+void smc_destructor(void);
+
+/*
+ . The kernel calls this function when someone wants to use the device,
+ . typically 'ifconfig ethX up'.
+*/
+static int smc_open(bd_t *bd);
+
+
+/*
+ . This is called by the kernel in response to 'ifconfig ethX down'.  It
+ . is responsible for cleaning up everything that the open routine
+ . does, and maybe putting the card into a powerdown state.
+*/
+static int smc_close(void);
+
+/*
+ . Configures the PHY through the MII Management interface
+*/
+#ifndef CONFIG_SMC91111_EXT_PHY
+static void smc_phy_configure(void);
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+/*
+ . This is a separate procedure to handle the receipt of a packet, to
+ . leave the interrupt code looking slightly cleaner
+*/
+static int smc_rcv(void);
+
+/* See if a MAC address is defined in the current environment. If so use it. If not
+ . print a warning and set the environment and other globals with the default.
+ . If an EEPROM is present it really should be consulted.
+*/
+int smc_get_ethaddr(bd_t *bd);
+int get_rom_mac(uchar *v_rom_mac);
+
+/*
+ ------------------------------------------------------------
+ .
+ . Internal routines
+ .
+ ------------------------------------------------------------
+*/
+
+#ifdef CONFIG_SMC_USE_IOFUNCS
+/*
+ * input and output functions
+ *
+ * Implemented due to inx,outx macros accessing the device improperly
+ * and putting the device into an unkown state.
+ *
+ * For instance, on Sharp LPD7A400 SDK, affects were chip memory
+ * could not be free'd (hence the alloc failures), duplicate packets,
+ * packets being corrupt (shifted) on the wire, etc.  Switching to the
+ * inx,outx functions fixed this problem.
+ */
+static inline word SMC_inw(dword offset);
+static inline void SMC_outw(word value, dword offset);
+static inline byte SMC_inb(dword offset);
+static inline void SMC_outb(byte value, dword offset);
+static inline void SMC_insw(dword offset, volatile uchar* buf, dword len);
+static inline void SMC_outsw(dword offset, uchar* buf, dword len);
+
+#define barrier() __asm__ __volatile__("": : :"memory")
+
+static inline word SMC_inw(dword offset)
+{
+	word v;
+	v = *((volatile word*)(SMC_BASE_ADDRESS+offset));
+	barrier(); *(volatile u32*)(0xc0000000);
+	return v;
+}
+
+static inline void SMC_outw(word value, dword offset)
+{
+	*((volatile word*)(SMC_BASE_ADDRESS+offset)) = value;
+	barrier(); *(volatile u32*)(0xc0000000);
+}
+
+static inline byte SMC_inb(dword offset)
+{
+	word  _w;
+
+	_w = SMC_inw(offset & ~((dword)1));
+	return (offset & 1) ? (byte)(_w >> 8) : (byte)(_w);
+}
+
+static inline void SMC_outb(byte value, dword offset)
+{
+	word  _w;
+
+	_w = SMC_inw(offset & ~((dword)1));
+	if (offset & 1)
+			*((volatile word*)(SMC_BASE_ADDRESS+(offset & ~((dword)1)))) = (value<<8) | (_w & 0x00ff);
+	else
+			*((volatile word*)(SMC_BASE_ADDRESS+offset)) = value | (_w & 0xff00);
+}
+
+static inline void SMC_insw(dword offset, volatile uchar* buf, dword len)
+{
+	volatile word *p = (volatile word *)buf;
+
+	while (len-- > 0) {
+		*p++ = SMC_inw(offset);
+		barrier();
+		*((volatile u32*)(0xc0000000));
+	}
+}
+
+static inline void SMC_outsw(dword offset, uchar* buf, dword len)
+{
+	volatile word *p = (volatile word *)buf;
+
+	while (len-- > 0) {
+		SMC_outw(*p++, offset);
+		barrier();
+		*(volatile u32*)(0xc0000000);
+	}
+}
+#endif  /* CONFIG_SMC_USE_IOFUNCS */
+
+static char unsigned smc_mac_addr[6] = {0x02, 0x80, 0xad, 0x20, 0x31, 0xb8};
+
+/*
+ * This function must be called before smc_open() if you want to override
+ * the default mac address.
+ */
+
+void smc_set_mac_addr(const unsigned char *addr) {
+	int i;
+
+	for (i=0; i < sizeof(smc_mac_addr); i++){
+		smc_mac_addr[i] = addr[i];
+	}
+}
+
+/*
+ * smc_get_macaddr is no longer used. If you want to override the default
+ * mac address, call smc_get_mac_addr as a part of the board initialization.
+ */
+
+#if 0
+void smc_get_macaddr( byte *addr ) {
+	/* MAC ADDRESS AT FLASHBLOCK 1 / OFFSET 0x10 */
+	unsigned char *dnp1110_mac = (unsigned char *) (0xE8000000 + 0x20010);
+	int i;
+
+
+	for (i=0; i<6; i++) {
+	    addr[0] = *(dnp1110_mac+0);
+	    addr[1] = *(dnp1110_mac+1);
+	    addr[2] = *(dnp1110_mac+2);
+	    addr[3] = *(dnp1110_mac+3);
+	    addr[4] = *(dnp1110_mac+4);
+	    addr[5] = *(dnp1110_mac+5);
+	}
+}
+#endif /* 0 */
+
+/***********************************************
+ * Show available memory		       *
+ ***********************************************/
+void dump_memory_info(void)
+{
+	word mem_info;
+	word old_bank;
+
+	old_bank = SMC_inw(BANK_SELECT)&0xF;
+
+	SMC_SELECT_BANK(0);
+	mem_info = SMC_inw( MIR_REG );
+	PRINTK2("Memory: %4d available\n", (mem_info >> 8)*2048);
+
+	SMC_SELECT_BANK(old_bank);
+}
+/*
+ . A rather simple routine to print out a packet for debugging purposes.
+*/
+#if SMC_DEBUG > 2
+static void print_packet( byte *, int );
+#endif
+
+#define tx_done(dev) 1
+
+
+/* this does a soft reset on the device */
+static void smc_reset( void );
+
+/* Enable Interrupts, Receive, and Transmit */
+static void smc_enable( void );
+
+/* this puts the device in an inactive state */
+static void smc_shutdown( void );
+
+/* Routines to Read and Write the PHY Registers across the
+   MII Management Interface
+*/
+
+#ifndef CONFIG_SMC91111_EXT_PHY
+static word smc_read_phy_register(byte phyreg);
+static void smc_write_phy_register(byte phyreg, word phydata);
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+
+static int poll4int (byte mask, int timeout)
+{
+	int tmo = get_timer (0) + timeout * CFG_HZ;
+	int is_timeout = 0;
+	word old_bank = SMC_inw (BSR_REG);
+
+	PRINTK2 ("Polling...\n");
+	SMC_SELECT_BANK (2);
+	while ((SMC_inw (SMC91111_INT_REG) & mask) == 0) {
+		if (get_timer (0) >= tmo) {
+			is_timeout = 1;
+			break;
+		}
+	}
+
+	/* restore old bank selection */
+	SMC_SELECT_BANK (old_bank);
+
+	if (is_timeout)
+		return 1;
+	else
+		return 0;
+}
+
+/* Only one release command at a time, please */
+static inline void smc_wait_mmu_release_complete (void)
+{
+	int count = 0;
+
+	/* assume bank 2 selected */
+	while (SMC_inw (MMU_CMD_REG) & MC_BUSY) {
+		udelay (1);	/* Wait until not busy */
+		if (++count > 200)
+			break;
+	}
+}
+
+/*
+ . Function: smc_reset( void )
+ . Purpose:
+ .	This sets the SMC91111 chip to its normal state, hopefully from whatever
+ .	mess that any other DOS driver has put it in.
+ .
+ . Maybe I should reset more registers to defaults in here?  SOFTRST  should
+ . do that for me.
+ .
+ . Method:
+ .	1.  send a SOFT RESET
+ .	2.  wait for it to finish
+ .	3.  enable autorelease mode
+ .	4.  reset the memory management unit
+ .	5.  clear all interrupts
+ .
+*/
+static void smc_reset (void)
+{
+	PRINTK2 ("%s: smc_reset\n", SMC_DEV_NAME);
+
+	/* This resets the registers mostly to defaults, but doesn't
+	   affect EEPROM.  That seems unnecessary */
+	SMC_SELECT_BANK (0);
+	SMC_outw (RCR_SOFTRST, RCR_REG);
+
+	/* Setup the Configuration Register */
+	/* This is necessary because the CONFIG_REG is not affected */
+	/* by a soft reset */
+
+	SMC_SELECT_BANK (1);
+#if defined(CONFIG_SMC91111_EXT_PHY)
+	SMC_outw (CONFIG_DEFAULT | CONFIG_EXT_PHY, CONFIG_REG);
+#else
+	SMC_outw (CONFIG_DEFAULT, CONFIG_REG);
+#endif
+
+
+	/* Release from possible power-down state */
+	/* Configuration register is not affected by Soft Reset */
+	SMC_outw (SMC_inw (CONFIG_REG) | CONFIG_EPH_POWER_EN, CONFIG_REG);
+
+	SMC_SELECT_BANK (0);
+
+	/* this should pause enough for the chip to be happy */
+	udelay (10);
+
+	/* Disable transmit and receive functionality */
+	SMC_outw (RCR_CLEAR, RCR_REG);
+	SMC_outw (TCR_CLEAR, TCR_REG);
+
+	/* set the control register */
+	SMC_SELECT_BANK (1);
+	SMC_outw (CTL_DEFAULT, CTL_REG);
+
+	/* Reset the MMU */
+	SMC_SELECT_BANK (2);
+	smc_wait_mmu_release_complete ();
+	SMC_outw (MC_RESET, MMU_CMD_REG);
+	while (SMC_inw (MMU_CMD_REG) & MC_BUSY)
+		udelay (1);	/* Wait until not busy */
+
+	/* Note:  It doesn't seem that waiting for the MMU busy is needed here,
+	   but this is a place where future chipsets _COULD_ break.  Be wary
+	   of issuing another MMU command right after this */
+
+	/* Disable all interrupts */
+	SMC_outb (0, IM_REG);
+}
+
+/*
+ . Function: smc_enable
+ . Purpose: let the chip talk to the outside work
+ . Method:
+ .	1.  Enable the transmitter
+ .	2.  Enable the receiver
+ .	3.  Enable interrupts
+*/
+static void smc_enable()
+{
+	PRINTK2("%s: smc_enable\n", SMC_DEV_NAME);
+	SMC_SELECT_BANK( 0 );
+	/* see the header file for options in TCR/RCR DEFAULT*/
+	SMC_outw( TCR_DEFAULT, TCR_REG );
+	SMC_outw( RCR_DEFAULT, RCR_REG );
+
+	/* clear MII_DIS */
+/*	smc_write_phy_register(PHY_CNTL_REG, 0x0000); */
+}
+
+/*
+ . Function: smc_shutdown
+ . Purpose:  closes down the SMC91xxx chip.
+ . Method:
+ .	1. zero the interrupt mask
+ .	2. clear the enable receive flag
+ .	3. clear the enable xmit flags
+ .
+ . TODO:
+ .   (1) maybe utilize power down mode.
+ .	Why not yet?  Because while the chip will go into power down mode,
+ .	the manual says that it will wake up in response to any I/O requests
+ .	in the register space.	 Empirical results do not show this working.
+*/
+static void smc_shutdown()
+{
+	PRINTK2(CARDNAME ": smc_shutdown\n");
+
+	/* no more interrupts for me */
+	SMC_SELECT_BANK( 2 );
+	SMC_outb( 0, IM_REG );
+
+	/* and tell the card to stay away from that nasty outside world */
+	SMC_SELECT_BANK( 0 );
+	SMC_outb( RCR_CLEAR, RCR_REG );
+	SMC_outb( TCR_CLEAR, TCR_REG );
+#ifdef SHARED_RESOURCES
+	swap_to(FLASH);
+#endif
+}
+
+
+/*
+ . Function:  smc_hardware_send_packet(struct net_device * )
+ . Purpose:
+ .	This sends the actual packet to the SMC9xxx chip.
+ .
+ . Algorithm:
+ .	First, see if a saved_skb is available.
+ .		( this should NOT be called if there is no 'saved_skb'
+ .	Now, find the packet number that the chip allocated
+ .	Point the data pointers at it in memory
+ .	Set the length word in the chip's memory
+ .	Dump the packet to chip memory
+ .	Check if a last byte is needed ( odd length packet )
+ .		if so, set the control flag right
+ .	Tell the card to send it
+ .	Enable the transmit interrupt, so I know if it failed
+ .	Free the kernel data if I actually sent it.
+*/
+static int smc_send_packet (volatile void *packet, int packet_length)
+{
+	byte packet_no;
+	unsigned long ioaddr;
+	byte *buf;
+	int length;
+	int numPages;
+	int try = 0;
+	int time_out;
+	byte status;
+	byte saved_pnr;
+	word saved_ptr;
+
+	/* save PTR and PNR registers before manipulation */
+	SMC_SELECT_BANK (2);
+	saved_pnr = SMC_inb( PN_REG );
+	saved_ptr = SMC_inw( PTR_REG );
+
+	PRINTK3 ("%s: smc_hardware_send_packet\n", SMC_DEV_NAME);
+
+	length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN;
+
+	/* allocate memory
+	 ** The MMU wants the number of pages to be the number of 256 bytes
+	 ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
+	 **
+	 ** The 91C111 ignores the size bits, but the code is left intact
+	 ** for backwards and future compatibility.
+	 **
+	 ** Pkt size for allocating is data length +6 (for additional status
+	 ** words, length and ctl!)
+	 **
+	 ** If odd size then last byte is included in this header.
+	 */
+	numPages = ((length & 0xfffe) + 6);
+	numPages >>= 8;		/* Divide by 256 */
+
+	if (numPages > 7) {
+		printf ("%s: Far too big packet error. \n", SMC_DEV_NAME);
+		return 0;
+	}
+
+	/* now, try to allocate the memory */
+	SMC_SELECT_BANK (2);
+	SMC_outw (MC_ALLOC | numPages, MMU_CMD_REG);
+
+	/* FIXME: the ALLOC_INT bit never gets set *
+	 * so the following will always give a	   *
+	 * memory allocation error.		   *
+	 * same code works in armboot though	   *
+	 * -ro
+	 */
+
+again:
+	try++;
+	time_out = MEMORY_WAIT_TIME;
+	do {
+		status = SMC_inb (SMC91111_INT_REG);
+		if (status & IM_ALLOC_INT) {
+			/* acknowledge the interrupt */
+			SMC_outb (IM_ALLOC_INT, SMC91111_INT_REG);
+			break;
+		}
+	} while (--time_out);
+
+	if (!time_out) {
+		PRINTK2 ("%s: memory allocation, try %d failed ...\n",
+			 SMC_DEV_NAME, try);
+		if (try < SMC_ALLOC_MAX_TRY)
+			goto again;
+		else
+			return 0;
+	}
+
+	PRINTK2 ("%s: memory allocation, try %d succeeded ...\n",
+		 SMC_DEV_NAME, try);
+
+	/* I can send the packet now.. */
+
+	ioaddr = SMC_BASE_ADDRESS;
+
+	buf = (byte *) packet;
+
+	/* If I get here, I _know_ there is a packet slot waiting for me */
+	packet_no = SMC_inb (AR_REG);
+	if (packet_no & AR_FAILED) {
+		/* or isn't there?  BAD CHIP! */
+		printf ("%s: Memory allocation failed. \n", SMC_DEV_NAME);
+		return 0;
+	}
+
+	/* we have a packet address, so tell the card to use it */
+#ifndef CONFIG_XAENIAX
+	SMC_outb (packet_no, PN_REG);
+#else
+	/* On Xaeniax board, we can't use SMC_outb here because that way
+	 * the Allocate MMU command will end up written to the command register
+	 * as well, which will lead to a problem.
+	 */
+	SMC_outl (packet_no << 16, 0);
+#endif
+	/* do not write new ptr value if Write data fifo not empty */
+	while ( saved_ptr & PTR_NOTEMPTY )
+		printf ("Write data fifo not empty!\n");
+
+	/* point to the beginning of the packet */
+	SMC_outw (PTR_AUTOINC, PTR_REG);
+
+	PRINTK3 ("%s: Trying to xmit packet of length %x\n",
+		 SMC_DEV_NAME, length);
+
+#if SMC_DEBUG > 2
+	printf ("Transmitting Packet\n");
+	print_packet (buf, length);
+#endif
+
+	/* send the packet length ( +6 for status, length and ctl byte )
+	   and the status word ( set to zeros ) */
+#ifdef USE_32_BIT
+	SMC_outl ((length + 6) << 16, SMC91111_DATA_REG);
+#else
+	SMC_outw (0, SMC91111_DATA_REG);
+	/* send the packet length ( +6 for status words, length, and ctl */
+	SMC_outw ((length + 6), SMC91111_DATA_REG);
+#endif
+
+	/* send the actual data
+	   . I _think_ it's faster to send the longs first, and then
+	   . mop up by sending the last word.  It depends heavily
+	   . on alignment, at least on the 486.	 Maybe it would be
+	   . a good idea to check which is optimal?  But that could take
+	   . almost as much time as is saved?
+	 */
+#ifdef USE_32_BIT
+	SMC_outsl (SMC91111_DATA_REG, buf, length >> 2);
+#ifndef CONFIG_XAENIAX
+	if (length & 0x2)
+		SMC_outw (*((word *) (buf + (length & 0xFFFFFFFC))),
+			  SMC91111_DATA_REG);
+#else
+	/* On XANEIAX, we can only use 32-bit writes, so we need to handle
+	 * unaligned tail part specially. The standard code doesn't work.
+	 */
+	if ((length & 3) == 3) {
+		u16 * ptr = (u16*) &buf[length-3];
+		SMC_outl((*ptr) | ((0x2000 | buf[length-1]) << 16),
+				SMC91111_DATA_REG);
+	} else if ((length & 2) == 2) {
+		u16 * ptr = (u16*) &buf[length-2];
+		SMC_outl(*ptr, SMC91111_DATA_REG);
+	} else if (length & 1) {
+		SMC_outl((0x2000 | buf[length-1]), SMC91111_DATA_REG);
+	} else {
+		SMC_outl(0, SMC91111_DATA_REG);
+	}
+#endif
+#else
+	SMC_outsw (SMC91111_DATA_REG, buf, (length) >> 1);
+#endif /* USE_32_BIT */
+
+#ifndef CONFIG_XAENIAX
+	/* Send the last byte, if there is one.	  */
+	if ((length & 1) == 0) {
+		SMC_outw (0, SMC91111_DATA_REG);
+	} else {
+		SMC_outw (buf[length - 1] | 0x2000, SMC91111_DATA_REG);
+	}
+#endif
+
+	/* and let the chipset deal with it */
+	SMC_outw (MC_ENQUEUE, MMU_CMD_REG);
+
+	/* poll for TX INT */
+	/* if (poll4int (IM_TX_INT, SMC_TX_TIMEOUT)) { */
+	/* poll for TX_EMPTY INT - autorelease enabled */
+	if (poll4int(IM_TX_EMPTY_INT, SMC_TX_TIMEOUT)) {
+		/* sending failed */
+		PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME);
+
+		/* release packet */
+		/* no need to release, MMU does that now */
+#ifdef CONFIG_XAENIAX
+		 SMC_outw (MC_FREEPKT, MMU_CMD_REG);
+#endif
+
+		/* wait for MMU getting ready (low) */
+		while (SMC_inw (MMU_CMD_REG) & MC_BUSY) {
+			udelay (10);
+		}
+
+		PRINTK2 ("MMU ready\n");
+
+
+		return 0;
+	} else {
+		/* ack. int */
+		SMC_outb (IM_TX_EMPTY_INT, SMC91111_INT_REG);
+		/* SMC_outb (IM_TX_INT, SMC91111_INT_REG); */
+		PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME,
+			 length);
+
+		/* release packet */
+		/* no need to release, MMU does that now */
+#ifdef CONFIG_XAENIAX
+		SMC_outw (MC_FREEPKT, MMU_CMD_REG);
+#endif
+
+		/* wait for MMU getting ready (low) */
+		while (SMC_inw (MMU_CMD_REG) & MC_BUSY) {
+			udelay (10);
+		}
+
+		PRINTK2 ("MMU ready\n");
+
+
+	}
+
+	/* restore previously saved registers */
+#ifndef CONFIG_XAENIAX
+	SMC_outb( saved_pnr, PN_REG );
+#else
+	/* On Xaeniax board, we can't use SMC_outb here because that way
+	 * the Allocate MMU command will end up written to the command register
+	 * as well, which will lead to a problem.
+	 */
+	SMC_outl(saved_pnr << 16, 0);
+#endif
+	SMC_outw( saved_ptr, PTR_REG );
+
+	return length;
+}
+
+/*-------------------------------------------------------------------------
+ |
+ | smc_destructor( struct net_device * dev )
+ |   Input parameters:
+ |	dev, pointer to the device structure
+ |
+ |   Output:
+ |	None.
+ |
+ ---------------------------------------------------------------------------
+*/
+void smc_destructor()
+{
+	PRINTK2(CARDNAME ": smc_destructor\n");
+}
+
+
+/*
+ * Open and Initialize the board
+ *
+ * Set up everything, reset the card, etc ..
+ *
+ */
+static int smc_open (bd_t * bd)
+{
+	int i, err;
+
+	PRINTK2 ("%s: smc_open\n", SMC_DEV_NAME);
+
+	/* reset the hardware */
+	smc_reset ();
+	smc_enable ();
+
+	/* Configure the PHY */
+#ifndef CONFIG_SMC91111_EXT_PHY
+	smc_phy_configure ();
+#endif
+
+	/* conservative setting (10Mbps, HalfDuplex, no AutoNeg.) */
+/*	SMC_SELECT_BANK(0); */
+/*	SMC_outw(0, RPC_REG); */
+	SMC_SELECT_BANK (1);
+
+	err = smc_get_ethaddr (bd);	/* set smc_mac_addr, and sync it with u-boot globals */
+	if (err < 0) {
+		memset (bd->bi_enetaddr, 0, 6); /* hack to make error stick! upper code will abort if not set */
+		return (-1);	/* upper code ignores this, but NOT bi_enetaddr */
+	}
+#ifdef USE_32_BIT
+	for (i = 0; i < 6; i += 2) {
+		word address;
+
+		address = smc_mac_addr[i + 1] << 8;
+		address |= smc_mac_addr[i];
+		SMC_outw (address, (ADDR0_REG + i));
+	}
+#else
+	for (i = 0; i < 6; i++)
+		SMC_outb (smc_mac_addr[i], (ADDR0_REG + i));
+#endif
+
+	return 0;
+}
+
+/*-------------------------------------------------------------
+ .
+ . smc_rcv -  receive a packet from the card
+ .
+ . There is ( at least ) a packet waiting to be read from
+ . chip-memory.
+ .
+ . o Read the status
+ . o If an error, record it
+ . o otherwise, read in the packet
+ --------------------------------------------------------------
+*/
+static int smc_rcv()
+{
+	int	packet_number;
+	word	status;
+	word	packet_length;
+	int	is_error = 0;
+#ifdef USE_32_BIT
+	dword stat_len;
+#endif
+	byte saved_pnr;
+	word saved_ptr;
+
+	SMC_SELECT_BANK(2);
+	/* save PTR and PTR registers */
+	saved_pnr = SMC_inb( PN_REG );
+	saved_ptr = SMC_inw( PTR_REG );
+
+	packet_number = SMC_inw( RXFIFO_REG );
+
+	if ( packet_number & RXFIFO_REMPTY ) {
+
+		return 0;
+	}
+
+	PRINTK3("%s: smc_rcv\n", SMC_DEV_NAME);
+	/*  start reading from the start of the packet */
+	SMC_outw( PTR_READ | PTR_RCV | PTR_AUTOINC, PTR_REG );
+
+	/* First two words are status and packet_length */
+#ifdef USE_32_BIT
+	stat_len = SMC_inl(SMC91111_DATA_REG);
+	status = stat_len & 0xffff;
+	packet_length = stat_len >> 16;
+#else
+	status		= SMC_inw( SMC91111_DATA_REG );
+	packet_length	= SMC_inw( SMC91111_DATA_REG );
+#endif
+
+	packet_length &= 0x07ff;  /* mask off top bits */
+
+	PRINTK2("RCV: STATUS %4x LENGTH %4x\n", status, packet_length );
+
+	if ( !(status & RS_ERRORS ) ){
+		/* Adjust for having already read the first two words */
+		packet_length -= 4; /*4; */
+
+
+		/* set odd length for bug in LAN91C111, */
+		/* which never sets RS_ODDFRAME */
+		/* TODO ? */
+
+
+#ifdef USE_32_BIT
+		PRINTK3(" Reading %d dwords (and %d bytes) \n",
+			packet_length >> 2, packet_length & 3 );
+		/* QUESTION:  Like in the TX routine, do I want
+		   to send the DWORDs or the bytes first, or some
+		   mixture.  A mixture might improve already slow PIO
+		   performance	*/
+		SMC_insl( SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 2 );
+		/* read the left over bytes */
+		if (packet_length & 3) {
+			int i;
+
+			byte *tail = (byte *)(NetRxPackets[0] + (packet_length & ~3));
+			dword leftover = SMC_inl(SMC91111_DATA_REG);
+			for (i=0; i<(packet_length & 3); i++)
+				*tail++ = (byte) (leftover >> (8*i)) & 0xff;
+		}
+#else
+		PRINTK3(" Reading %d words and %d byte(s) \n",
+			(packet_length >> 1 ), packet_length & 1 );
+		SMC_insw(SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 1);
+
+#endif /* USE_32_BIT */
+
+#if	SMC_DEBUG > 2
+		printf("Receiving Packet\n");
+		print_packet( NetRxPackets[0], packet_length );
+#endif
+	} else {
+		/* error ... */
+		/* TODO ? */
+		is_error = 1;
+	}
+
+	while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY )
+		udelay(1); /* Wait until not busy */
+
+	/*  error or good, tell the card to get rid of this packet */
+	SMC_outw( MC_RELEASE, MMU_CMD_REG );
+
+	while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY )
+		udelay(1); /* Wait until not busy */
+
+	/* restore saved registers */
+#ifndef CONFIG_XAENIAX
+	SMC_outb( saved_pnr, PN_REG );
+#else
+	/* On Xaeniax board, we can't use SMC_outb here because that way
+	 * the Allocate MMU command will end up written to the command register
+	 * as well, which will lead to a problem.
+	 */
+	SMC_outl( saved_pnr << 16, 0);
+#endif
+	SMC_outw( saved_ptr, PTR_REG );
+
+	if (!is_error) {
+		/* Pass the packet up to the protocol layers. */
+		NetReceive(NetRxPackets[0], packet_length);
+		return packet_length;
+	} else {
+		return 0;
+	}
+
+}
+
+
+/*----------------------------------------------------
+ . smc_close
+ .
+ . this makes the board clean up everything that it can
+ . and not talk to the outside world.	Caused by
+ . an 'ifconfig ethX down'
+ .
+ -----------------------------------------------------*/
+static int smc_close()
+{
+	PRINTK2("%s: smc_close\n", SMC_DEV_NAME);
+
+	/* clear everything */
+	smc_shutdown();
+
+	return 0;
+}
+
+
+#if 0
+/*------------------------------------------------------------
+ . Modify a bit in the LAN91C111 register set
+ .-------------------------------------------------------------*/
+static word smc_modify_regbit(int bank, int ioaddr, int reg,
+	unsigned int bit, int val)
+{
+	word regval;
+
+	SMC_SELECT_BANK( bank );
+
+	regval = SMC_inw( reg );
+	if (val)
+		regval |= bit;
+	else
+		regval &= ~bit;
+
+	SMC_outw( regval, 0 );
+	return(regval);
+}
+
+
+/*------------------------------------------------------------
+ . Retrieve a bit in the LAN91C111 register set
+ .-------------------------------------------------------------*/
+static int smc_get_regbit(int bank, int ioaddr, int reg, unsigned int bit)
+{
+	SMC_SELECT_BANK( bank );
+	if ( SMC_inw( reg ) & bit)
+		return(1);
+	else
+		return(0);
+}
+
+
+/*------------------------------------------------------------
+ . Modify a LAN91C111 register (word access only)
+ .-------------------------------------------------------------*/
+static void smc_modify_reg(int bank, int ioaddr, int reg, word val)
+{
+	SMC_SELECT_BANK( bank );
+	SMC_outw( val, reg );
+}
+
+
+/*------------------------------------------------------------
+ . Retrieve a LAN91C111 register (word access only)
+ .-------------------------------------------------------------*/
+static int smc_get_reg(int bank, int ioaddr, int reg)
+{
+	SMC_SELECT_BANK( bank );
+	return(SMC_inw( reg ));
+}
+
+#endif /* 0 */
+
+/*---PHY CONTROL AND CONFIGURATION----------------------------------------- */
+
+#if (SMC_DEBUG > 2 )
+
+/*------------------------------------------------------------
+ . Debugging function for viewing MII Management serial bitstream
+ .-------------------------------------------------------------*/
+static void smc_dump_mii_stream (byte * bits, int size)
+{
+	int i;
+
+	printf ("BIT#:");
+	for (i = 0; i < size; ++i) {
+		printf ("%d", i % 10);
+	}
+
+	printf ("\nMDOE:");
+	for (i = 0; i < size; ++i) {
+		if (bits[i] & MII_MDOE)
+			printf ("1");
+		else
+			printf ("0");
+	}
+
+	printf ("\nMDO :");
+	for (i = 0; i < size; ++i) {
+		if (bits[i] & MII_MDO)
+			printf ("1");
+		else
+			printf ("0");
+	}
+
+	printf ("\nMDI :");
+	for (i = 0; i < size; ++i) {
+		if (bits[i] & MII_MDI)
+			printf ("1");
+		else
+			printf ("0");
+	}
+
+	printf ("\n");
+}
+#endif
+
+/*------------------------------------------------------------
+ . Reads a register from the MII Management serial interface
+ .-------------------------------------------------------------*/
+#ifndef CONFIG_SMC91111_EXT_PHY
+static word smc_read_phy_register (byte phyreg)
+{
+	int oldBank;
+	int i;
+	byte mask;
+	word mii_reg;
+	byte bits[64];
+	int clk_idx = 0;
+	int input_idx;
+	word phydata;
+	byte phyaddr = SMC_PHY_ADDR;
+
+	/* 32 consecutive ones on MDO to establish sync */
+	for (i = 0; i < 32; ++i)
+		bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+	/* Start code <01> */
+	bits[clk_idx++] = MII_MDOE;
+	bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+	/* Read command <10> */
+	bits[clk_idx++] = MII_MDOE | MII_MDO;
+	bits[clk_idx++] = MII_MDOE;
+
+	/* Output the PHY address, msb first */
+	mask = (byte) 0x10;
+	for (i = 0; i < 5; ++i) {
+		if (phyaddr & mask)
+			bits[clk_idx++] = MII_MDOE | MII_MDO;
+		else
+			bits[clk_idx++] = MII_MDOE;
+
+		/* Shift to next lowest bit */
+		mask >>= 1;
+	}
+
+	/* Output the phy register number, msb first */
+	mask = (byte) 0x10;
+	for (i = 0; i < 5; ++i) {
+		if (phyreg & mask)
+			bits[clk_idx++] = MII_MDOE | MII_MDO;
+		else
+			bits[clk_idx++] = MII_MDOE;
+
+		/* Shift to next lowest bit */
+		mask >>= 1;
+	}
+
+	/* Tristate and turnaround (2 bit times) */
+	bits[clk_idx++] = 0;
+	/*bits[clk_idx++] = 0; */
+
+	/* Input starts at this bit time */
+	input_idx = clk_idx;
+
+	/* Will input 16 bits */
+	for (i = 0; i < 16; ++i)
+		bits[clk_idx++] = 0;
+
+	/* Final clock bit */
+	bits[clk_idx++] = 0;
+
+	/* Save the current bank */
+	oldBank = SMC_inw (BANK_SELECT);
+
+	/* Select bank 3 */
+	SMC_SELECT_BANK (3);
+
+	/* Get the current MII register value */
+	mii_reg = SMC_inw (MII_REG);
+
+	/* Turn off all MII Interface bits */
+	mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO);
+
+	/* Clock all 64 cycles */
+	for (i = 0; i < sizeof bits; ++i) {
+		/* Clock Low - output data */
+		SMC_outw (mii_reg | bits[i], MII_REG);
+		udelay (SMC_PHY_CLOCK_DELAY);
+
+
+		/* Clock Hi - input data */
+		SMC_outw (mii_reg | bits[i] | MII_MCLK, MII_REG);
+		udelay (SMC_PHY_CLOCK_DELAY);
+		bits[i] |= SMC_inw (MII_REG) & MII_MDI;
+	}
+
+	/* Return to idle state */
+	/* Set clock to low, data to low, and output tristated */
+	SMC_outw (mii_reg, MII_REG);
+	udelay (SMC_PHY_CLOCK_DELAY);
+
+	/* Restore original bank select */
+	SMC_SELECT_BANK (oldBank);
+
+	/* Recover input data */
+	phydata = 0;
+	for (i = 0; i < 16; ++i) {
+		phydata <<= 1;
+
+		if (bits[input_idx++] & MII_MDI)
+			phydata |= 0x0001;
+	}
+
+#if (SMC_DEBUG > 2 )
+	printf ("smc_read_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
+		phyaddr, phyreg, phydata);
+	smc_dump_mii_stream (bits, sizeof bits);
+#endif
+
+	return (phydata);
+}
+
+
+/*------------------------------------------------------------
+ . Writes a register to the MII Management serial interface
+ .-------------------------------------------------------------*/
+static void smc_write_phy_register (byte phyreg, word phydata)
+{
+	int oldBank;
+	int i;
+	word mask;
+	word mii_reg;
+	byte bits[65];
+	int clk_idx = 0;
+	byte phyaddr = SMC_PHY_ADDR;
+
+	/* 32 consecutive ones on MDO to establish sync */
+	for (i = 0; i < 32; ++i)
+		bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+	/* Start code <01> */
+	bits[clk_idx++] = MII_MDOE;
+	bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+	/* Write command <01> */
+	bits[clk_idx++] = MII_MDOE;
+	bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+	/* Output the PHY address, msb first */
+	mask = (byte) 0x10;
+	for (i = 0; i < 5; ++i) {
+		if (phyaddr & mask)
+			bits[clk_idx++] = MII_MDOE | MII_MDO;
+		else
+			bits[clk_idx++] = MII_MDOE;
+
+		/* Shift to next lowest bit */
+		mask >>= 1;
+	}
+
+	/* Output the phy register number, msb first */
+	mask = (byte) 0x10;
+	for (i = 0; i < 5; ++i) {
+		if (phyreg & mask)
+			bits[clk_idx++] = MII_MDOE | MII_MDO;
+		else
+			bits[clk_idx++] = MII_MDOE;
+
+		/* Shift to next lowest bit */
+		mask >>= 1;
+	}
+
+	/* Tristate and turnaround (2 bit times) */
+	bits[clk_idx++] = 0;
+	bits[clk_idx++] = 0;
+
+	/* Write out 16 bits of data, msb first */
+	mask = 0x8000;
+	for (i = 0; i < 16; ++i) {
+		if (phydata & mask)
+			bits[clk_idx++] = MII_MDOE | MII_MDO;
+		else
+			bits[clk_idx++] = MII_MDOE;
+
+		/* Shift to next lowest bit */
+		mask >>= 1;
+	}
+
+	/* Final clock bit (tristate) */
+	bits[clk_idx++] = 0;
+
+	/* Save the current bank */
+	oldBank = SMC_inw (BANK_SELECT);
+
+	/* Select bank 3 */
+	SMC_SELECT_BANK (3);
+
+	/* Get the current MII register value */
+	mii_reg = SMC_inw (MII_REG);
+
+	/* Turn off all MII Interface bits */
+	mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO);
+
+	/* Clock all cycles */
+	for (i = 0; i < sizeof bits; ++i) {
+		/* Clock Low - output data */
+		SMC_outw (mii_reg | bits[i], MII_REG);
+		udelay (SMC_PHY_CLOCK_DELAY);
+
+
+		/* Clock Hi - input data */
+		SMC_outw (mii_reg | bits[i] | MII_MCLK, MII_REG);
+		udelay (SMC_PHY_CLOCK_DELAY);
+		bits[i] |= SMC_inw (MII_REG) & MII_MDI;
+	}
+
+	/* Return to idle state */
+	/* Set clock to low, data to low, and output tristated */
+	SMC_outw (mii_reg, MII_REG);
+	udelay (SMC_PHY_CLOCK_DELAY);
+
+	/* Restore original bank select */
+	SMC_SELECT_BANK (oldBank);
+
+#if (SMC_DEBUG > 2 )
+	printf ("smc_write_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
+		phyaddr, phyreg, phydata);
+	smc_dump_mii_stream (bits, sizeof bits);
+#endif
+}
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+
+/*------------------------------------------------------------
+ . Waits the specified number of milliseconds - kernel friendly
+ .-------------------------------------------------------------*/
+#ifndef CONFIG_SMC91111_EXT_PHY
+static void smc_wait_ms(unsigned int ms)
+{
+	udelay(ms*1000);
+}
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+
+/*------------------------------------------------------------
+ . Configures the specified PHY using Autonegotiation. Calls
+ . smc_phy_fixed() if the user has requested a certain config.
+ .-------------------------------------------------------------*/
+#ifndef CONFIG_SMC91111_EXT_PHY
+static void smc_phy_configure ()
+{
+	int timeout;
+	byte phyaddr;
+	word my_phy_caps;	/* My PHY capabilities */
+	word my_ad_caps;	/* My Advertised capabilities */
+	word status = 0;	/*;my status = 0 */
+	int failed = 0;
+
+	PRINTK3 ("%s: smc_program_phy()\n", SMC_DEV_NAME);
+
+
+	/* Get the detected phy address */
+	phyaddr = SMC_PHY_ADDR;
+
+	/* Reset the PHY, setting all other bits to zero */
+	smc_write_phy_register (PHY_CNTL_REG, PHY_CNTL_RST);
+
+	/* Wait for the reset to complete, or time out */
+	timeout = 6;		/* Wait up to 3 seconds */
+	while (timeout--) {
+		if (!(smc_read_phy_register (PHY_CNTL_REG)
+		      & PHY_CNTL_RST)) {
+			/* reset complete */
+			break;
+		}
+
+		smc_wait_ms (500);	/* wait 500 millisecs */
+	}
+
+	if (timeout < 1) {
+		printf ("%s:PHY reset timed out\n", SMC_DEV_NAME);
+		goto smc_phy_configure_exit;
+	}
+
+	/* Read PHY Register 18, Status Output */
+	/* lp->lastPhy18 = smc_read_phy_register(PHY_INT_REG); */
+
+	/* Enable PHY Interrupts (for register 18) */
+	/* Interrupts listed here are disabled */
+	smc_write_phy_register (PHY_MASK_REG, 0xffff);
+
+	/* Configure the Receive/Phy Control register */
+	SMC_SELECT_BANK (0);
+	SMC_outw (RPC_DEFAULT, RPC_REG);
+
+	/* Copy our capabilities from PHY_STAT_REG to PHY_AD_REG */
+	my_phy_caps = smc_read_phy_register (PHY_STAT_REG);
+	my_ad_caps = PHY_AD_CSMA;	/* I am CSMA capable */
+
+	if (my_phy_caps & PHY_STAT_CAP_T4)
+		my_ad_caps |= PHY_AD_T4;
+
+	if (my_phy_caps & PHY_STAT_CAP_TXF)
+		my_ad_caps |= PHY_AD_TX_FDX;
+
+	if (my_phy_caps & PHY_STAT_CAP_TXH)
+		my_ad_caps |= PHY_AD_TX_HDX;
+
+	if (my_phy_caps & PHY_STAT_CAP_TF)
+		my_ad_caps |= PHY_AD_10_FDX;
+
+	if (my_phy_caps & PHY_STAT_CAP_TH)
+		my_ad_caps |= PHY_AD_10_HDX;
+
+	/* Update our Auto-Neg Advertisement Register */
+	smc_write_phy_register (PHY_AD_REG, my_ad_caps);
+
+	/* Read the register back.  Without this, it appears that when */
+	/* auto-negotiation is restarted, sometimes it isn't ready and */
+	/* the link does not come up. */
+	smc_read_phy_register(PHY_AD_REG);
+
+	PRINTK2 ("%s: phy caps=%x\n", SMC_DEV_NAME, my_phy_caps);
+	PRINTK2 ("%s: phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps);
+
+	/* Restart auto-negotiation process in order to advertise my caps */
+	smc_write_phy_register (PHY_CNTL_REG,
+				PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST);
+
+	/* Wait for the auto-negotiation to complete.  This may take from */
+	/* 2 to 3 seconds. */
+	/* Wait for the reset to complete, or time out */
+	timeout = CONFIG_SMC_AUTONEG_TIMEOUT * 2;
+	while (timeout--) {
+
+		status = smc_read_phy_register (PHY_STAT_REG);
+		if (status & PHY_STAT_ANEG_ACK) {
+			/* auto-negotiate complete */
+			break;
+		}
+
+		smc_wait_ms (500);	/* wait 500 millisecs */
+
+		/* Restart auto-negotiation if remote fault */
+		if (status & PHY_STAT_REM_FLT) {
+			printf ("%s: PHY remote fault detected\n",
+				SMC_DEV_NAME);
+
+			/* Restart auto-negotiation */
+			printf ("%s: PHY restarting auto-negotiation\n",
+				SMC_DEV_NAME);
+			smc_write_phy_register (PHY_CNTL_REG,
+						PHY_CNTL_ANEG_EN |
+						PHY_CNTL_ANEG_RST |
+						PHY_CNTL_SPEED |
+						PHY_CNTL_DPLX);
+		}
+	}
+
+	if (timeout < 1) {
+		printf ("%s: PHY auto-negotiate timed out\n", SMC_DEV_NAME);
+		failed = 1;
+	}
+
+	/* Fail if we detected an auto-negotiate remote fault */
+	if (status & PHY_STAT_REM_FLT) {
+		printf ("%s: PHY remote fault detected\n", SMC_DEV_NAME);
+		failed = 1;
+	}
+
+	/* Re-Configure the Receive/Phy Control register */
+	SMC_outw (RPC_DEFAULT, RPC_REG);
+
+smc_phy_configure_exit:	;
+
+}
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+
+#if SMC_DEBUG > 2
+static void print_packet( byte * buf, int length )
+{
+	int i;
+	int remainder;
+	int lines;
+
+	printf("Packet of length %d \n", length );
+
+#if SMC_DEBUG > 3
+	lines = length / 16;
+	remainder = length % 16;
+
+	for ( i = 0; i < lines ; i ++ ) {
+		int cur;
+
+		for ( cur = 0; cur < 8; cur ++ ) {
+			byte a, b;
+
+			a = *(buf ++ );
+			b = *(buf ++ );
+			printf("%02x%02x ", a, b );
+		}
+		printf("\n");
+	}
+	for ( i = 0; i < remainder/2 ; i++ ) {
+		byte a, b;
+
+		a = *(buf ++ );
+		b = *(buf ++ );
+		printf("%02x%02x ", a, b );
+	}
+	printf("\n");
+#endif
+}
+#endif
+
+int eth_init(bd_t *bd) {
+#ifdef SHARED_RESOURCES
+	swap_to(ETHERNET);
+#endif
+	return (smc_open(bd));
+}
+
+void eth_halt() {
+	smc_close();
+}
+
+int eth_rx() {
+	return smc_rcv();
+}
+
+int eth_send(volatile void *packet, int length) {
+	return smc_send_packet(packet, length);
+}
+
+int smc_get_ethaddr (bd_t * bd)
+{
+	int env_size, rom_valid, env_present = 0, reg;
+	char *s = NULL, *e, es[] = "11:22:33:44:55:66";
+	char s_env_mac[64];
+	uchar v_env_mac[6], v_rom_mac[6], *v_mac;
+
+	env_size = getenv_r ("ethaddr", s_env_mac, sizeof (s_env_mac));
+	if ((env_size > 0) && (env_size < sizeof (es))) {	/* exit if env is bad */
+		printf ("\n*** ERROR: ethaddr is not set properly!!\n");
+		return (-1);
+	}
+
+	if (env_size > 0) {
+		env_present = 1;
+		s = s_env_mac;
+	}
+
+	for (reg = 0; reg < 6; ++reg) { /* turn string into mac value */
+		v_env_mac[reg] = s ? simple_strtoul (s, &e, 16) : 0;
+		if (s)
+			s = (*e) ? e + 1 : e;
+	}
+
+	rom_valid = get_rom_mac (v_rom_mac);	/* get ROM mac value if any */
+
+	if (!env_present) {	/* if NO env */
+		if (rom_valid) {	/* but ROM is valid */
+			v_mac = v_rom_mac;
+			sprintf (s_env_mac, "%02X:%02X:%02X:%02X:%02X:%02X",
+				 v_mac[0], v_mac[1], v_mac[2], v_mac[3],
+				 v_mac[4], v_mac[5]);
+			setenv ("ethaddr", s_env_mac);
+		} else {	/* no env, bad ROM */
+			printf ("\n*** ERROR: ethaddr is NOT set !!\n");
+			return (-1);
+		}
+	} else {		/* good env, don't care ROM */
+		v_mac = v_env_mac;	/* always use a good env over a ROM */
+	}
+
+	if (env_present && rom_valid) { /* if both env and ROM are good */
+		if (memcmp (v_env_mac, v_rom_mac, 6) != 0) {
+			printf ("\nWarning: MAC addresses don't match:\n");
+			printf ("\tHW MAC address:  "
+				"%02X:%02X:%02X:%02X:%02X:%02X\n",
+				v_rom_mac[0], v_rom_mac[1],
+				v_rom_mac[2], v_rom_mac[3],
+				v_rom_mac[4], v_rom_mac[5] );
+			printf ("\t\"ethaddr\" value: "
+				"%02X:%02X:%02X:%02X:%02X:%02X\n",
+				v_env_mac[0], v_env_mac[1],
+				v_env_mac[2], v_env_mac[3],
+				v_env_mac[4], v_env_mac[5]) ;
+			debug ("### Set MAC addr from environment\n");
+		}
+	}
+	memcpy (bd->bi_enetaddr, v_mac, 6);	/* update global address to match env (allows env changing) */
+	smc_set_mac_addr ((uchar *)v_mac);	/* use old function to update smc default */
+	PRINTK("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n", v_mac[0], v_mac[1],
+		v_mac[2], v_mac[3], v_mac[4], v_mac[5]);
+	return (0);
+}
+
+int get_rom_mac (uchar *v_rom_mac)
+{
+#ifdef HARDCODE_MAC	/* used for testing or to supress run time warnings */
+	char hw_mac_addr[] = { 0x02, 0x80, 0xad, 0x20, 0x31, 0xb8 };
+
+	memcpy (v_rom_mac, hw_mac_addr, 6);
+	return (1);
+#else
+	int i;
+	int valid_mac = 0;
+
+	SMC_SELECT_BANK (1);
+	for (i=0; i<6; i++)
+	{
+		v_rom_mac[i] = SMC_inb ((ADDR0_REG + i));
+		valid_mac |= v_rom_mac[i];
+	}
+
+	return (valid_mac ? 1 : 0);
+#endif
+}
+#endif /* CONFIG_DRIVER_SMC91111 */