From 2439e4bfa111babf4bc07ba20efbf3e36036813e Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 21 Nov 2007 21:19:24 +0100 Subject: drivers/net : move net drivers to drivers/net Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- drivers/net/smc91111.c | 1623 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1623 insertions(+) create mode 100644 drivers/net/smc91111.c (limited to 'drivers/net/smc91111.c') diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c new file mode 100644 index 0000000..8061f12 --- /dev/null +++ b/drivers/net/smc91111.c @@ -0,0 +1,1623 @@ +/*------------------------------------------------------------------------ + . smc91111.c + . This is a driver for SMSC's 91C111 single-chip Ethernet device. + . + . (C) Copyright 2002 + . Sysgo Real-Time Solutions, GmbH + . Rolf Offermanns + . + . Copyright (C) 2001 Standard Microsystems Corporation (SMSC) + . Developed by Simple Network Magic Corporation (SNMC) + . Copyright (C) 1996 by Erik Stahlman (ES) + . + . This program is free software; you can redistribute it and/or modify + . it under the terms of the GNU General Public License as published by + . the Free Software Foundation; either version 2 of the License, or + . (at your option) any later version. + . + . This program is distributed in the hope that it will be useful, + . but WITHOUT ANY WARRANTY; without even the implied warranty of + . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + . GNU General Public License for more details. + . + . You should have received a copy of the GNU General Public License + . along with this program; if not, write to the Free Software + . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + . + . Information contained in this file was obtained from the LAN91C111 + . manual from SMC. To get a copy, if you really want one, you can find + . information under www.smsc.com. + . + . + . "Features" of the SMC chip: + . Integrated PHY/MAC for 10/100BaseT Operation + . Supports internal and external MII + . Integrated 8K packet memory + . EEPROM interface for configuration + . + . Arguments: + . io = for the base address + . irq = for the IRQ + . + . author: + . Erik Stahlman ( erik@vt.edu ) + . Daris A Nevil ( dnevil@snmc.com ) + . + . + . Hardware multicast code from Peter Cammaert ( pc@denkart.be ) + . + . Sources: + . o SMSC LAN91C111 databook (www.smsc.com) + . o smc9194.c by Erik Stahlman + . o skeleton.c by Donald Becker ( becker@cesdis.gsfc.nasa.gov ) + . + . History: + . 06/19/03 Richard Woodruff Made u-boot environment aware and added mac addr checks. + . 10/17/01 Marco Hasewinkel Modify for DNP/1110 + . 07/25/01 Woojung Huh Modify for ADS Bitsy + . 04/25/01 Daris A Nevil Initial public release through SMSC + . 03/16/01 Daris A Nevil Modified smc9194.c for use with LAN91C111 + ----------------------------------------------------------------------------*/ + +#include +#include +#include +#include "smc91111.h" +#include + +#ifdef CONFIG_DRIVER_SMC91111 + +/* Use power-down feature of the chip */ +#define POWER_DOWN 0 + +#define NO_AUTOPROBE + +#define SMC_DEBUG 0 + +#if SMC_DEBUG > 1 +static const char version[] = + "smc91111.c:v1.0 04/25/01 by Daris A Nevil (dnevil@snmc.com)\n"; +#endif + +/* Autonegotiation timeout in seconds */ +#ifndef CONFIG_SMC_AUTONEG_TIMEOUT +#define CONFIG_SMC_AUTONEG_TIMEOUT 10 +#endif + +/*------------------------------------------------------------------------ + . + . Configuration options, for the experienced user to change. + . + -------------------------------------------------------------------------*/ + +/* + . Wait time for memory to be free. This probably shouldn't be + . tuned that much, as waiting for this means nothing else happens + . in the system +*/ +#define MEMORY_WAIT_TIME 16 + + +#if (SMC_DEBUG > 2 ) +#define PRINTK3(args...) printf(args) +#else +#define PRINTK3(args...) +#endif + +#if SMC_DEBUG > 1 +#define PRINTK2(args...) printf(args) +#else +#define PRINTK2(args...) +#endif + +#ifdef SMC_DEBUG +#define PRINTK(args...) printf(args) +#else +#define PRINTK(args...) +#endif + + +/*------------------------------------------------------------------------ + . + . The internal workings of the driver. If you are changing anything + . here with the SMC stuff, you should have the datasheet and know + . what you are doing. + . + -------------------------------------------------------------------------*/ +#define CARDNAME "LAN91C111" + +/* Memory sizing constant */ +#define LAN91C111_MEMORY_MULTIPLIER (1024*2) + +#ifndef CONFIG_SMC91111_BASE +#define CONFIG_SMC91111_BASE 0x20000300 +#endif + +#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE + +#define SMC_DEV_NAME "SMC91111" +#define SMC_PHY_ADDR 0x0000 +#define SMC_ALLOC_MAX_TRY 5 +#define SMC_TX_TIMEOUT 30 + +#define SMC_PHY_CLOCK_DELAY 1000 + +#define ETH_ZLEN 60 + +#ifdef CONFIG_SMC_USE_32_BIT +#define USE_32_BIT 1 +#else +#undef USE_32_BIT +#endif +/*----------------------------------------------------------------- + . + . The driver can be entered at any of the following entry points. + . + .------------------------------------------------------------------ */ + +extern int eth_init(bd_t *bd); +extern void eth_halt(void); +extern int eth_rx(void); +extern int eth_send(volatile void *packet, int length); + +#ifdef SHARED_RESOURCES + extern void swap_to(int device_id); +#endif + +/* + . This is called by register_netdev(). It is responsible for + . checking the portlist for the SMC9000 series chipset. If it finds + . one, then it will initialize the device, find the hardware information, + . and sets up the appropriate device parameters. + . NOTE: Interrupts are *OFF* when this procedure is called. + . + . NB:This shouldn't be static since it is referred to externally. +*/ +int smc_init(void); + +/* + . This is called by unregister_netdev(). It is responsible for + . cleaning up before the driver is finally unregistered and discarded. +*/ +void smc_destructor(void); + +/* + . The kernel calls this function when someone wants to use the device, + . typically 'ifconfig ethX up'. +*/ +static int smc_open(bd_t *bd); + + +/* + . This is called by the kernel in response to 'ifconfig ethX down'. It + . is responsible for cleaning up everything that the open routine + . does, and maybe putting the card into a powerdown state. +*/ +static int smc_close(void); + +/* + . Configures the PHY through the MII Management interface +*/ +#ifndef CONFIG_SMC91111_EXT_PHY +static void smc_phy_configure(void); +#endif /* !CONFIG_SMC91111_EXT_PHY */ + +/* + . This is a separate procedure to handle the receipt of a packet, to + . leave the interrupt code looking slightly cleaner +*/ +static int smc_rcv(void); + +/* See if a MAC address is defined in the current environment. If so use it. If not + . print a warning and set the environment and other globals with the default. + . If an EEPROM is present it really should be consulted. +*/ +int smc_get_ethaddr(bd_t *bd); +int get_rom_mac(uchar *v_rom_mac); + +/* + ------------------------------------------------------------ + . + . Internal routines + . + ------------------------------------------------------------ +*/ + +#ifdef CONFIG_SMC_USE_IOFUNCS +/* + * input and output functions + * + * Implemented due to inx,outx macros accessing the device improperly + * and putting the device into an unkown state. + * + * For instance, on Sharp LPD7A400 SDK, affects were chip memory + * could not be free'd (hence the alloc failures), duplicate packets, + * packets being corrupt (shifted) on the wire, etc. Switching to the + * inx,outx functions fixed this problem. + */ +static inline word SMC_inw(dword offset); +static inline void SMC_outw(word value, dword offset); +static inline byte SMC_inb(dword offset); +static inline void SMC_outb(byte value, dword offset); +static inline void SMC_insw(dword offset, volatile uchar* buf, dword len); +static inline void SMC_outsw(dword offset, uchar* buf, dword len); + +#define barrier() __asm__ __volatile__("": : :"memory") + +static inline word SMC_inw(dword offset) +{ + word v; + v = *((volatile word*)(SMC_BASE_ADDRESS+offset)); + barrier(); *(volatile u32*)(0xc0000000); + return v; +} + +static inline void SMC_outw(word value, dword offset) +{ + *((volatile word*)(SMC_BASE_ADDRESS+offset)) = value; + barrier(); *(volatile u32*)(0xc0000000); +} + +static inline byte SMC_inb(dword offset) +{ + word _w; + + _w = SMC_inw(offset & ~((dword)1)); + return (offset & 1) ? (byte)(_w >> 8) : (byte)(_w); +} + +static inline void SMC_outb(byte value, dword offset) +{ + word _w; + + _w = SMC_inw(offset & ~((dword)1)); + if (offset & 1) + *((volatile word*)(SMC_BASE_ADDRESS+(offset & ~((dword)1)))) = (value<<8) | (_w & 0x00ff); + else + *((volatile word*)(SMC_BASE_ADDRESS+offset)) = value | (_w & 0xff00); +} + +static inline void SMC_insw(dword offset, volatile uchar* buf, dword len) +{ + volatile word *p = (volatile word *)buf; + + while (len-- > 0) { + *p++ = SMC_inw(offset); + barrier(); + *((volatile u32*)(0xc0000000)); + } +} + +static inline void SMC_outsw(dword offset, uchar* buf, dword len) +{ + volatile word *p = (volatile word *)buf; + + while (len-- > 0) { + SMC_outw(*p++, offset); + barrier(); + *(volatile u32*)(0xc0000000); + } +} +#endif /* CONFIG_SMC_USE_IOFUNCS */ + +static char unsigned smc_mac_addr[6] = {0x02, 0x80, 0xad, 0x20, 0x31, 0xb8}; + +/* + * This function must be called before smc_open() if you want to override + * the default mac address. + */ + +void smc_set_mac_addr(const unsigned char *addr) { + int i; + + for (i=0; i < sizeof(smc_mac_addr); i++){ + smc_mac_addr[i] = addr[i]; + } +} + +/* + * smc_get_macaddr is no longer used. If you want to override the default + * mac address, call smc_get_mac_addr as a part of the board initialization. + */ + +#if 0 +void smc_get_macaddr( byte *addr ) { + /* MAC ADDRESS AT FLASHBLOCK 1 / OFFSET 0x10 */ + unsigned char *dnp1110_mac = (unsigned char *) (0xE8000000 + 0x20010); + int i; + + + for (i=0; i<6; i++) { + addr[0] = *(dnp1110_mac+0); + addr[1] = *(dnp1110_mac+1); + addr[2] = *(dnp1110_mac+2); + addr[3] = *(dnp1110_mac+3); + addr[4] = *(dnp1110_mac+4); + addr[5] = *(dnp1110_mac+5); + } +} +#endif /* 0 */ + +/*********************************************** + * Show available memory * + ***********************************************/ +void dump_memory_info(void) +{ + word mem_info; + word old_bank; + + old_bank = SMC_inw(BANK_SELECT)&0xF; + + SMC_SELECT_BANK(0); + mem_info = SMC_inw( MIR_REG ); + PRINTK2("Memory: %4d available\n", (mem_info >> 8)*2048); + + SMC_SELECT_BANK(old_bank); +} +/* + . A rather simple routine to print out a packet for debugging purposes. +*/ +#if SMC_DEBUG > 2 +static void print_packet( byte *, int ); +#endif + +#define tx_done(dev) 1 + + +/* this does a soft reset on the device */ +static void smc_reset( void ); + +/* Enable Interrupts, Receive, and Transmit */ +static void smc_enable( void ); + +/* this puts the device in an inactive state */ +static void smc_shutdown( void ); + +/* Routines to Read and Write the PHY Registers across the + MII Management Interface +*/ + +#ifndef CONFIG_SMC91111_EXT_PHY +static word smc_read_phy_register(byte phyreg); +static void smc_write_phy_register(byte phyreg, word phydata); +#endif /* !CONFIG_SMC91111_EXT_PHY */ + + +static int poll4int (byte mask, int timeout) +{ + int tmo = get_timer (0) + timeout * CFG_HZ; + int is_timeout = 0; + word old_bank = SMC_inw (BSR_REG); + + PRINTK2 ("Polling...\n"); + SMC_SELECT_BANK (2); + while ((SMC_inw (SMC91111_INT_REG) & mask) == 0) { + if (get_timer (0) >= tmo) { + is_timeout = 1; + break; + } + } + + /* restore old bank selection */ + SMC_SELECT_BANK (old_bank); + + if (is_timeout) + return 1; + else + return 0; +} + +/* Only one release command at a time, please */ +static inline void smc_wait_mmu_release_complete (void) +{ + int count = 0; + + /* assume bank 2 selected */ + while (SMC_inw (MMU_CMD_REG) & MC_BUSY) { + udelay (1); /* Wait until not busy */ + if (++count > 200) + break; + } +} + +/* + . Function: smc_reset( void ) + . Purpose: + . This sets the SMC91111 chip to its normal state, hopefully from whatever + . mess that any other DOS driver has put it in. + . + . Maybe I should reset more registers to defaults in here? SOFTRST should + . do that for me. + . + . Method: + . 1. send a SOFT RESET + . 2. wait for it to finish + . 3. enable autorelease mode + . 4. reset the memory management unit + . 5. clear all interrupts + . +*/ +static void smc_reset (void) +{ + PRINTK2 ("%s: smc_reset\n", SMC_DEV_NAME); + + /* This resets the registers mostly to defaults, but doesn't + affect EEPROM. That seems unnecessary */ + SMC_SELECT_BANK (0); + SMC_outw (RCR_SOFTRST, RCR_REG); + + /* Setup the Configuration Register */ + /* This is necessary because the CONFIG_REG is not affected */ + /* by a soft reset */ + + SMC_SELECT_BANK (1); +#if defined(CONFIG_SMC91111_EXT_PHY) + SMC_outw (CONFIG_DEFAULT | CONFIG_EXT_PHY, CONFIG_REG); +#else + SMC_outw (CONFIG_DEFAULT, CONFIG_REG); +#endif + + + /* Release from possible power-down state */ + /* Configuration register is not affected by Soft Reset */ + SMC_outw (SMC_inw (CONFIG_REG) | CONFIG_EPH_POWER_EN, CONFIG_REG); + + SMC_SELECT_BANK (0); + + /* this should pause enough for the chip to be happy */ + udelay (10); + + /* Disable transmit and receive functionality */ + SMC_outw (RCR_CLEAR, RCR_REG); + SMC_outw (TCR_CLEAR, TCR_REG); + + /* set the control register */ + SMC_SELECT_BANK (1); + SMC_outw (CTL_DEFAULT, CTL_REG); + + /* Reset the MMU */ + SMC_SELECT_BANK (2); + smc_wait_mmu_release_complete (); + SMC_outw (MC_RESET, MMU_CMD_REG); + while (SMC_inw (MMU_CMD_REG) & MC_BUSY) + udelay (1); /* Wait until not busy */ + + /* Note: It doesn't seem that waiting for the MMU busy is needed here, + but this is a place where future chipsets _COULD_ break. Be wary + of issuing another MMU command right after this */ + + /* Disable all interrupts */ + SMC_outb (0, IM_REG); +} + +/* + . Function: smc_enable + . Purpose: let the chip talk to the outside work + . Method: + . 1. Enable the transmitter + . 2. Enable the receiver + . 3. Enable interrupts +*/ +static void smc_enable() +{ + PRINTK2("%s: smc_enable\n", SMC_DEV_NAME); + SMC_SELECT_BANK( 0 ); + /* see the header file for options in TCR/RCR DEFAULT*/ + SMC_outw( TCR_DEFAULT, TCR_REG ); + SMC_outw( RCR_DEFAULT, RCR_REG ); + + /* clear MII_DIS */ +/* smc_write_phy_register(PHY_CNTL_REG, 0x0000); */ +} + +/* + . Function: smc_shutdown + . Purpose: closes down the SMC91xxx chip. + . Method: + . 1. zero the interrupt mask + . 2. clear the enable receive flag + . 3. clear the enable xmit flags + . + . TODO: + . (1) maybe utilize power down mode. + . Why not yet? Because while the chip will go into power down mode, + . the manual says that it will wake up in response to any I/O requests + . in the register space. Empirical results do not show this working. +*/ +static void smc_shutdown() +{ + PRINTK2(CARDNAME ": smc_shutdown\n"); + + /* no more interrupts for me */ + SMC_SELECT_BANK( 2 ); + SMC_outb( 0, IM_REG ); + + /* and tell the card to stay away from that nasty outside world */ + SMC_SELECT_BANK( 0 ); + SMC_outb( RCR_CLEAR, RCR_REG ); + SMC_outb( TCR_CLEAR, TCR_REG ); +#ifdef SHARED_RESOURCES + swap_to(FLASH); +#endif +} + + +/* + . Function: smc_hardware_send_packet(struct net_device * ) + . Purpose: + . This sends the actual packet to the SMC9xxx chip. + . + . Algorithm: + . First, see if a saved_skb is available. + . ( this should NOT be called if there is no 'saved_skb' + . Now, find the packet number that the chip allocated + . Point the data pointers at it in memory + . Set the length word in the chip's memory + . Dump the packet to chip memory + . Check if a last byte is needed ( odd length packet ) + . if so, set the control flag right + . Tell the card to send it + . Enable the transmit interrupt, so I know if it failed + . Free the kernel data if I actually sent it. +*/ +static int smc_send_packet (volatile void *packet, int packet_length) +{ + byte packet_no; + unsigned long ioaddr; + byte *buf; + int length; + int numPages; + int try = 0; + int time_out; + byte status; + byte saved_pnr; + word saved_ptr; + + /* save PTR and PNR registers before manipulation */ + SMC_SELECT_BANK (2); + saved_pnr = SMC_inb( PN_REG ); + saved_ptr = SMC_inw( PTR_REG ); + + PRINTK3 ("%s: smc_hardware_send_packet\n", SMC_DEV_NAME); + + length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN; + + /* allocate memory + ** The MMU wants the number of pages to be the number of 256 bytes + ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) ) + ** + ** The 91C111 ignores the size bits, but the code is left intact + ** for backwards and future compatibility. + ** + ** Pkt size for allocating is data length +6 (for additional status + ** words, length and ctl!) + ** + ** If odd size then last byte is included in this header. + */ + numPages = ((length & 0xfffe) + 6); + numPages >>= 8; /* Divide by 256 */ + + if (numPages > 7) { + printf ("%s: Far too big packet error. \n", SMC_DEV_NAME); + return 0; + } + + /* now, try to allocate the memory */ + SMC_SELECT_BANK (2); + SMC_outw (MC_ALLOC | numPages, MMU_CMD_REG); + + /* FIXME: the ALLOC_INT bit never gets set * + * so the following will always give a * + * memory allocation error. * + * same code works in armboot though * + * -ro + */ + +again: + try++; + time_out = MEMORY_WAIT_TIME; + do { + status = SMC_inb (SMC91111_INT_REG); + if (status & IM_ALLOC_INT) { + /* acknowledge the interrupt */ + SMC_outb (IM_ALLOC_INT, SMC91111_INT_REG); + break; + } + } while (--time_out); + + if (!time_out) { + PRINTK2 ("%s: memory allocation, try %d failed ...\n", + SMC_DEV_NAME, try); + if (try < SMC_ALLOC_MAX_TRY) + goto again; + else + return 0; + } + + PRINTK2 ("%s: memory allocation, try %d succeeded ...\n", + SMC_DEV_NAME, try); + + /* I can send the packet now.. */ + + ioaddr = SMC_BASE_ADDRESS; + + buf = (byte *) packet; + + /* If I get here, I _know_ there is a packet slot waiting for me */ + packet_no = SMC_inb (AR_REG); + if (packet_no & AR_FAILED) { + /* or isn't there? BAD CHIP! */ + printf ("%s: Memory allocation failed. \n", SMC_DEV_NAME); + return 0; + } + + /* we have a packet address, so tell the card to use it */ +#ifndef CONFIG_XAENIAX + SMC_outb (packet_no, PN_REG); +#else + /* On Xaeniax board, we can't use SMC_outb here because that way + * the Allocate MMU command will end up written to the command register + * as well, which will lead to a problem. + */ + SMC_outl (packet_no << 16, 0); +#endif + /* do not write new ptr value if Write data fifo not empty */ + while ( saved_ptr & PTR_NOTEMPTY ) + printf ("Write data fifo not empty!\n"); + + /* point to the beginning of the packet */ + SMC_outw (PTR_AUTOINC, PTR_REG); + + PRINTK3 ("%s: Trying to xmit packet of length %x\n", + SMC_DEV_NAME, length); + +#if SMC_DEBUG > 2 + printf ("Transmitting Packet\n"); + print_packet (buf, length); +#endif + + /* send the packet length ( +6 for status, length and ctl byte ) + and the status word ( set to zeros ) */ +#ifdef USE_32_BIT + SMC_outl ((length + 6) << 16, SMC91111_DATA_REG); +#else + SMC_outw (0, SMC91111_DATA_REG); + /* send the packet length ( +6 for status words, length, and ctl */ + SMC_outw ((length + 6), SMC91111_DATA_REG); +#endif + + /* send the actual data + . I _think_ it's faster to send the longs first, and then + . mop up by sending the last word. It depends heavily + . on alignment, at least on the 486. Maybe it would be + . a good idea to check which is optimal? But that could take + . almost as much time as is saved? + */ +#ifdef USE_32_BIT + SMC_outsl (SMC91111_DATA_REG, buf, length >> 2); +#ifndef CONFIG_XAENIAX + if (length & 0x2) + SMC_outw (*((word *) (buf + (length & 0xFFFFFFFC))), + SMC91111_DATA_REG); +#else + /* On XANEIAX, we can only use 32-bit writes, so we need to handle + * unaligned tail part specially. The standard code doesn't work. + */ + if ((length & 3) == 3) { + u16 * ptr = (u16*) &buf[length-3]; + SMC_outl((*ptr) | ((0x2000 | buf[length-1]) << 16), + SMC91111_DATA_REG); + } else if ((length & 2) == 2) { + u16 * ptr = (u16*) &buf[length-2]; + SMC_outl(*ptr, SMC91111_DATA_REG); + } else if (length & 1) { + SMC_outl((0x2000 | buf[length-1]), SMC91111_DATA_REG); + } else { + SMC_outl(0, SMC91111_DATA_REG); + } +#endif +#else + SMC_outsw (SMC91111_DATA_REG, buf, (length) >> 1); +#endif /* USE_32_BIT */ + +#ifndef CONFIG_XAENIAX + /* Send the last byte, if there is one. */ + if ((length & 1) == 0) { + SMC_outw (0, SMC91111_DATA_REG); + } else { + SMC_outw (buf[length - 1] | 0x2000, SMC91111_DATA_REG); + } +#endif + + /* and let the chipset deal with it */ + SMC_outw (MC_ENQUEUE, MMU_CMD_REG); + + /* poll for TX INT */ + /* if (poll4int (IM_TX_INT, SMC_TX_TIMEOUT)) { */ + /* poll for TX_EMPTY INT - autorelease enabled */ + if (poll4int(IM_TX_EMPTY_INT, SMC_TX_TIMEOUT)) { + /* sending failed */ + PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME); + + /* release packet */ + /* no need to release, MMU does that now */ +#ifdef CONFIG_XAENIAX + SMC_outw (MC_FREEPKT, MMU_CMD_REG); +#endif + + /* wait for MMU getting ready (low) */ + while (SMC_inw (MMU_CMD_REG) & MC_BUSY) { + udelay (10); + } + + PRINTK2 ("MMU ready\n"); + + + return 0; + } else { + /* ack. int */ + SMC_outb (IM_TX_EMPTY_INT, SMC91111_INT_REG); + /* SMC_outb (IM_TX_INT, SMC91111_INT_REG); */ + PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME, + length); + + /* release packet */ + /* no need to release, MMU does that now */ +#ifdef CONFIG_XAENIAX + SMC_outw (MC_FREEPKT, MMU_CMD_REG); +#endif + + /* wait for MMU getting ready (low) */ + while (SMC_inw (MMU_CMD_REG) & MC_BUSY) { + udelay (10); + } + + PRINTK2 ("MMU ready\n"); + + + } + + /* restore previously saved registers */ +#ifndef CONFIG_XAENIAX + SMC_outb( saved_pnr, PN_REG ); +#else + /* On Xaeniax board, we can't use SMC_outb here because that way + * the Allocate MMU command will end up written to the command register + * as well, which will lead to a problem. + */ + SMC_outl(saved_pnr << 16, 0); +#endif + SMC_outw( saved_ptr, PTR_REG ); + + return length; +} + +/*------------------------------------------------------------------------- + | + | smc_destructor( struct net_device * dev ) + | Input parameters: + | dev, pointer to the device structure + | + | Output: + | None. + | + --------------------------------------------------------------------------- +*/ +void smc_destructor() +{ + PRINTK2(CARDNAME ": smc_destructor\n"); +} + + +/* + * Open and Initialize the board + * + * Set up everything, reset the card, etc .. + * + */ +static int smc_open (bd_t * bd) +{ + int i, err; + + PRINTK2 ("%s: smc_open\n", SMC_DEV_NAME); + + /* reset the hardware */ + smc_reset (); + smc_enable (); + + /* Configure the PHY */ +#ifndef CONFIG_SMC91111_EXT_PHY + smc_phy_configure (); +#endif + + /* conservative setting (10Mbps, HalfDuplex, no AutoNeg.) */ +/* SMC_SELECT_BANK(0); */ +/* SMC_outw(0, RPC_REG); */ + SMC_SELECT_BANK (1); + + err = smc_get_ethaddr (bd); /* set smc_mac_addr, and sync it with u-boot globals */ + if (err < 0) { + memset (bd->bi_enetaddr, 0, 6); /* hack to make error stick! upper code will abort if not set */ + return (-1); /* upper code ignores this, but NOT bi_enetaddr */ + } +#ifdef USE_32_BIT + for (i = 0; i < 6; i += 2) { + word address; + + address = smc_mac_addr[i + 1] << 8; + address |= smc_mac_addr[i]; + SMC_outw (address, (ADDR0_REG + i)); + } +#else + for (i = 0; i < 6; i++) + SMC_outb (smc_mac_addr[i], (ADDR0_REG + i)); +#endif + + return 0; +} + +/*------------------------------------------------------------- + . + . smc_rcv - receive a packet from the card + . + . There is ( at least ) a packet waiting to be read from + . chip-memory. + . + . o Read the status + . o If an error, record it + . o otherwise, read in the packet + -------------------------------------------------------------- +*/ +static int smc_rcv() +{ + int packet_number; + word status; + word packet_length; + int is_error = 0; +#ifdef USE_32_BIT + dword stat_len; +#endif + byte saved_pnr; + word saved_ptr; + + SMC_SELECT_BANK(2); + /* save PTR and PTR registers */ + saved_pnr = SMC_inb( PN_REG ); + saved_ptr = SMC_inw( PTR_REG ); + + packet_number = SMC_inw( RXFIFO_REG ); + + if ( packet_number & RXFIFO_REMPTY ) { + + return 0; + } + + PRINTK3("%s: smc_rcv\n", SMC_DEV_NAME); + /* start reading from the start of the packet */ + SMC_outw( PTR_READ | PTR_RCV | PTR_AUTOINC, PTR_REG ); + + /* First two words are status and packet_length */ +#ifdef USE_32_BIT + stat_len = SMC_inl(SMC91111_DATA_REG); + status = stat_len & 0xffff; + packet_length = stat_len >> 16; +#else + status = SMC_inw( SMC91111_DATA_REG ); + packet_length = SMC_inw( SMC91111_DATA_REG ); +#endif + + packet_length &= 0x07ff; /* mask off top bits */ + + PRINTK2("RCV: STATUS %4x LENGTH %4x\n", status, packet_length ); + + if ( !(status & RS_ERRORS ) ){ + /* Adjust for having already read the first two words */ + packet_length -= 4; /*4; */ + + + /* set odd length for bug in LAN91C111, */ + /* which never sets RS_ODDFRAME */ + /* TODO ? */ + + +#ifdef USE_32_BIT + PRINTK3(" Reading %d dwords (and %d bytes) \n", + packet_length >> 2, packet_length & 3 ); + /* QUESTION: Like in the TX routine, do I want + to send the DWORDs or the bytes first, or some + mixture. A mixture might improve already slow PIO + performance */ + SMC_insl( SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 2 ); + /* read the left over bytes */ + if (packet_length & 3) { + int i; + + byte *tail = (byte *)(NetRxPackets[0] + (packet_length & ~3)); + dword leftover = SMC_inl(SMC91111_DATA_REG); + for (i=0; i<(packet_length & 3); i++) + *tail++ = (byte) (leftover >> (8*i)) & 0xff; + } +#else + PRINTK3(" Reading %d words and %d byte(s) \n", + (packet_length >> 1 ), packet_length & 1 ); + SMC_insw(SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 1); + +#endif /* USE_32_BIT */ + +#if SMC_DEBUG > 2 + printf("Receiving Packet\n"); + print_packet( NetRxPackets[0], packet_length ); +#endif + } else { + /* error ... */ + /* TODO ? */ + is_error = 1; + } + + while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY ) + udelay(1); /* Wait until not busy */ + + /* error or good, tell the card to get rid of this packet */ + SMC_outw( MC_RELEASE, MMU_CMD_REG ); + + while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY ) + udelay(1); /* Wait until not busy */ + + /* restore saved registers */ +#ifndef CONFIG_XAENIAX + SMC_outb( saved_pnr, PN_REG ); +#else + /* On Xaeniax board, we can't use SMC_outb here because that way + * the Allocate MMU command will end up written to the command register + * as well, which will lead to a problem. + */ + SMC_outl( saved_pnr << 16, 0); +#endif + SMC_outw( saved_ptr, PTR_REG ); + + if (!is_error) { + /* Pass the packet up to the protocol layers. */ + NetReceive(NetRxPackets[0], packet_length); + return packet_length; + } else { + return 0; + } + +} + + +/*---------------------------------------------------- + . smc_close + . + . this makes the board clean up everything that it can + . and not talk to the outside world. Caused by + . an 'ifconfig ethX down' + . + -----------------------------------------------------*/ +static int smc_close() +{ + PRINTK2("%s: smc_close\n", SMC_DEV_NAME); + + /* clear everything */ + smc_shutdown(); + + return 0; +} + + +#if 0 +/*------------------------------------------------------------ + . Modify a bit in the LAN91C111 register set + .-------------------------------------------------------------*/ +static word smc_modify_regbit(int bank, int ioaddr, int reg, + unsigned int bit, int val) +{ + word regval; + + SMC_SELECT_BANK( bank ); + + regval = SMC_inw( reg ); + if (val) + regval |= bit; + else + regval &= ~bit; + + SMC_outw( regval, 0 ); + return(regval); +} + + +/*------------------------------------------------------------ + . Retrieve a bit in the LAN91C111 register set + .-------------------------------------------------------------*/ +static int smc_get_regbit(int bank, int ioaddr, int reg, unsigned int bit) +{ + SMC_SELECT_BANK( bank ); + if ( SMC_inw( reg ) & bit) + return(1); + else + return(0); +} + + +/*------------------------------------------------------------ + . Modify a LAN91C111 register (word access only) + .-------------------------------------------------------------*/ +static void smc_modify_reg(int bank, int ioaddr, int reg, word val) +{ + SMC_SELECT_BANK( bank ); + SMC_outw( val, reg ); +} + + +/*------------------------------------------------------------ + . Retrieve a LAN91C111 register (word access only) + .-------------------------------------------------------------*/ +static int smc_get_reg(int bank, int ioaddr, int reg) +{ + SMC_SELECT_BANK( bank ); + return(SMC_inw( reg )); +} + +#endif /* 0 */ + +/*---PHY CONTROL AND CONFIGURATION----------------------------------------- */ + +#if (SMC_DEBUG > 2 ) + +/*------------------------------------------------------------ + . Debugging function for viewing MII Management serial bitstream + .-------------------------------------------------------------*/ +static void smc_dump_mii_stream (byte * bits, int size) +{ + int i; + + printf ("BIT#:"); + for (i = 0; i < size; ++i) { + printf ("%d", i % 10); + } + + printf ("\nMDOE:"); + for (i = 0; i < size; ++i) { + if (bits[i] & MII_MDOE) + printf ("1"); + else + printf ("0"); + } + + printf ("\nMDO :"); + for (i = 0; i < size; ++i) { + if (bits[i] & MII_MDO) + printf ("1"); + else + printf ("0"); + } + + printf ("\nMDI :"); + for (i = 0; i < size; ++i) { + if (bits[i] & MII_MDI) + printf ("1"); + else + printf ("0"); + } + + printf ("\n"); +} +#endif + +/*------------------------------------------------------------ + . Reads a register from the MII Management serial interface + .-------------------------------------------------------------*/ +#ifndef CONFIG_SMC91111_EXT_PHY +static word smc_read_phy_register (byte phyreg) +{ + int oldBank; + int i; + byte mask; + word mii_reg; + byte bits[64]; + int clk_idx = 0; + int input_idx; + word phydata; + byte phyaddr = SMC_PHY_ADDR; + + /* 32 consecutive ones on MDO to establish sync */ + for (i = 0; i < 32; ++i) + bits[clk_idx++] = MII_MDOE | MII_MDO; + + /* Start code <01> */ + bits[clk_idx++] = MII_MDOE; + bits[clk_idx++] = MII_MDOE | MII_MDO; + + /* Read command <10> */ + bits[clk_idx++] = MII_MDOE | MII_MDO; + bits[clk_idx++] = MII_MDOE; + + /* Output the PHY address, msb first */ + mask = (byte) 0x10; + for (i = 0; i < 5; ++i) { + if (phyaddr & mask) + bits[clk_idx++] = MII_MDOE | MII_MDO; + else + bits[clk_idx++] = MII_MDOE; + + /* Shift to next lowest bit */ + mask >>= 1; + } + + /* Output the phy register number, msb first */ + mask = (byte) 0x10; + for (i = 0; i < 5; ++i) { + if (phyreg & mask) + bits[clk_idx++] = MII_MDOE | MII_MDO; + else + bits[clk_idx++] = MII_MDOE; + + /* Shift to next lowest bit */ + mask >>= 1; + } + + /* Tristate and turnaround (2 bit times) */ + bits[clk_idx++] = 0; + /*bits[clk_idx++] = 0; */ + + /* Input starts at this bit time */ + input_idx = clk_idx; + + /* Will input 16 bits */ + for (i = 0; i < 16; ++i) + bits[clk_idx++] = 0; + + /* Final clock bit */ + bits[clk_idx++] = 0; + + /* Save the current bank */ + oldBank = SMC_inw (BANK_SELECT); + + /* Select bank 3 */ + SMC_SELECT_BANK (3); + + /* Get the current MII register value */ + mii_reg = SMC_inw (MII_REG); + + /* Turn off all MII Interface bits */ + mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO); + + /* Clock all 64 cycles */ + for (i = 0; i < sizeof bits; ++i) { + /* Clock Low - output data */ + SMC_outw (mii_reg | bits[i], MII_REG); + udelay (SMC_PHY_CLOCK_DELAY); + + + /* Clock Hi - input data */ + SMC_outw (mii_reg | bits[i] | MII_MCLK, MII_REG); + udelay (SMC_PHY_CLOCK_DELAY); + bits[i] |= SMC_inw (MII_REG) & MII_MDI; + } + + /* Return to idle state */ + /* Set clock to low, data to low, and output tristated */ + SMC_outw (mii_reg, MII_REG); + udelay (SMC_PHY_CLOCK_DELAY); + + /* Restore original bank select */ + SMC_SELECT_BANK (oldBank); + + /* Recover input data */ + phydata = 0; + for (i = 0; i < 16; ++i) { + phydata <<= 1; + + if (bits[input_idx++] & MII_MDI) + phydata |= 0x0001; + } + +#if (SMC_DEBUG > 2 ) + printf ("smc_read_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n", + phyaddr, phyreg, phydata); + smc_dump_mii_stream (bits, sizeof bits); +#endif + + return (phydata); +} + + +/*------------------------------------------------------------ + . Writes a register to the MII Management serial interface + .-------------------------------------------------------------*/ +static void smc_write_phy_register (byte phyreg, word phydata) +{ + int oldBank; + int i; + word mask; + word mii_reg; + byte bits[65]; + int clk_idx = 0; + byte phyaddr = SMC_PHY_ADDR; + + /* 32 consecutive ones on MDO to establish sync */ + for (i = 0; i < 32; ++i) + bits[clk_idx++] = MII_MDOE | MII_MDO; + + /* Start code <01> */ + bits[clk_idx++] = MII_MDOE; + bits[clk_idx++] = MII_MDOE | MII_MDO; + + /* Write command <01> */ + bits[clk_idx++] = MII_MDOE; + bits[clk_idx++] = MII_MDOE | MII_MDO; + + /* Output the PHY address, msb first */ + mask = (byte) 0x10; + for (i = 0; i < 5; ++i) { + if (phyaddr & mask) + bits[clk_idx++] = MII_MDOE | MII_MDO; + else + bits[clk_idx++] = MII_MDOE; + + /* Shift to next lowest bit */ + mask >>= 1; + } + + /* Output the phy register number, msb first */ + mask = (byte) 0x10; + for (i = 0; i < 5; ++i) { + if (phyreg & mask) + bits[clk_idx++] = MII_MDOE | MII_MDO; + else + bits[clk_idx++] = MII_MDOE; + + /* Shift to next lowest bit */ + mask >>= 1; + } + + /* Tristate and turnaround (2 bit times) */ + bits[clk_idx++] = 0; + bits[clk_idx++] = 0; + + /* Write out 16 bits of data, msb first */ + mask = 0x8000; + for (i = 0; i < 16; ++i) { + if (phydata & mask) + bits[clk_idx++] = MII_MDOE | MII_MDO; + else + bits[clk_idx++] = MII_MDOE; + + /* Shift to next lowest bit */ + mask >>= 1; + } + + /* Final clock bit (tristate) */ + bits[clk_idx++] = 0; + + /* Save the current bank */ + oldBank = SMC_inw (BANK_SELECT); + + /* Select bank 3 */ + SMC_SELECT_BANK (3); + + /* Get the current MII register value */ + mii_reg = SMC_inw (MII_REG); + + /* Turn off all MII Interface bits */ + mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO); + + /* Clock all cycles */ + for (i = 0; i < sizeof bits; ++i) { + /* Clock Low - output data */ + SMC_outw (mii_reg | bits[i], MII_REG); + udelay (SMC_PHY_CLOCK_DELAY); + + + /* Clock Hi - input data */ + SMC_outw (mii_reg | bits[i] | MII_MCLK, MII_REG); + udelay (SMC_PHY_CLOCK_DELAY); + bits[i] |= SMC_inw (MII_REG) & MII_MDI; + } + + /* Return to idle state */ + /* Set clock to low, data to low, and output tristated */ + SMC_outw (mii_reg, MII_REG); + udelay (SMC_PHY_CLOCK_DELAY); + + /* Restore original bank select */ + SMC_SELECT_BANK (oldBank); + +#if (SMC_DEBUG > 2 ) + printf ("smc_write_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n", + phyaddr, phyreg, phydata); + smc_dump_mii_stream (bits, sizeof bits); +#endif +} +#endif /* !CONFIG_SMC91111_EXT_PHY */ + + +/*------------------------------------------------------------ + . Waits the specified number of milliseconds - kernel friendly + .-------------------------------------------------------------*/ +#ifndef CONFIG_SMC91111_EXT_PHY +static void smc_wait_ms(unsigned int ms) +{ + udelay(ms*1000); +} +#endif /* !CONFIG_SMC91111_EXT_PHY */ + + +/*------------------------------------------------------------ + . Configures the specified PHY using Autonegotiation. Calls + . smc_phy_fixed() if the user has requested a certain config. + .-------------------------------------------------------------*/ +#ifndef CONFIG_SMC91111_EXT_PHY +static void smc_phy_configure () +{ + int timeout; + byte phyaddr; + word my_phy_caps; /* My PHY capabilities */ + word my_ad_caps; /* My Advertised capabilities */ + word status = 0; /*;my status = 0 */ + int failed = 0; + + PRINTK3 ("%s: smc_program_phy()\n", SMC_DEV_NAME); + + + /* Get the detected phy address */ + phyaddr = SMC_PHY_ADDR; + + /* Reset the PHY, setting all other bits to zero */ + smc_write_phy_register (PHY_CNTL_REG, PHY_CNTL_RST); + + /* Wait for the reset to complete, or time out */ + timeout = 6; /* Wait up to 3 seconds */ + while (timeout--) { + if (!(smc_read_phy_register (PHY_CNTL_REG) + & PHY_CNTL_RST)) { + /* reset complete */ + break; + } + + smc_wait_ms (500); /* wait 500 millisecs */ + } + + if (timeout < 1) { + printf ("%s:PHY reset timed out\n", SMC_DEV_NAME); + goto smc_phy_configure_exit; + } + + /* Read PHY Register 18, Status Output */ + /* lp->lastPhy18 = smc_read_phy_register(PHY_INT_REG); */ + + /* Enable PHY Interrupts (for register 18) */ + /* Interrupts listed here are disabled */ + smc_write_phy_register (PHY_MASK_REG, 0xffff); + + /* Configure the Receive/Phy Control register */ + SMC_SELECT_BANK (0); + SMC_outw (RPC_DEFAULT, RPC_REG); + + /* Copy our capabilities from PHY_STAT_REG to PHY_AD_REG */ + my_phy_caps = smc_read_phy_register (PHY_STAT_REG); + my_ad_caps = PHY_AD_CSMA; /* I am CSMA capable */ + + if (my_phy_caps & PHY_STAT_CAP_T4) + my_ad_caps |= PHY_AD_T4; + + if (my_phy_caps & PHY_STAT_CAP_TXF) + my_ad_caps |= PHY_AD_TX_FDX; + + if (my_phy_caps & PHY_STAT_CAP_TXH) + my_ad_caps |= PHY_AD_TX_HDX; + + if (my_phy_caps & PHY_STAT_CAP_TF) + my_ad_caps |= PHY_AD_10_FDX; + + if (my_phy_caps & PHY_STAT_CAP_TH) + my_ad_caps |= PHY_AD_10_HDX; + + /* Update our Auto-Neg Advertisement Register */ + smc_write_phy_register (PHY_AD_REG, my_ad_caps); + + /* Read the register back. Without this, it appears that when */ + /* auto-negotiation is restarted, sometimes it isn't ready and */ + /* the link does not come up. */ + smc_read_phy_register(PHY_AD_REG); + + PRINTK2 ("%s: phy caps=%x\n", SMC_DEV_NAME, my_phy_caps); + PRINTK2 ("%s: phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps); + + /* Restart auto-negotiation process in order to advertise my caps */ + smc_write_phy_register (PHY_CNTL_REG, + PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST); + + /* Wait for the auto-negotiation to complete. This may take from */ + /* 2 to 3 seconds. */ + /* Wait for the reset to complete, or time out */ + timeout = CONFIG_SMC_AUTONEG_TIMEOUT * 2; + while (timeout--) { + + status = smc_read_phy_register (PHY_STAT_REG); + if (status & PHY_STAT_ANEG_ACK) { + /* auto-negotiate complete */ + break; + } + + smc_wait_ms (500); /* wait 500 millisecs */ + + /* Restart auto-negotiation if remote fault */ + if (status & PHY_STAT_REM_FLT) { + printf ("%s: PHY remote fault detected\n", + SMC_DEV_NAME); + + /* Restart auto-negotiation */ + printf ("%s: PHY restarting auto-negotiation\n", + SMC_DEV_NAME); + smc_write_phy_register (PHY_CNTL_REG, + PHY_CNTL_ANEG_EN | + PHY_CNTL_ANEG_RST | + PHY_CNTL_SPEED | + PHY_CNTL_DPLX); + } + } + + if (timeout < 1) { + printf ("%s: PHY auto-negotiate timed out\n", SMC_DEV_NAME); + failed = 1; + } + + /* Fail if we detected an auto-negotiate remote fault */ + if (status & PHY_STAT_REM_FLT) { + printf ("%s: PHY remote fault detected\n", SMC_DEV_NAME); + failed = 1; + } + + /* Re-Configure the Receive/Phy Control register */ + SMC_outw (RPC_DEFAULT, RPC_REG); + +smc_phy_configure_exit: ; + +} +#endif /* !CONFIG_SMC91111_EXT_PHY */ + + +#if SMC_DEBUG > 2 +static void print_packet( byte * buf, int length ) +{ + int i; + int remainder; + int lines; + + printf("Packet of length %d \n", length ); + +#if SMC_DEBUG > 3 + lines = length / 16; + remainder = length % 16; + + for ( i = 0; i < lines ; i ++ ) { + int cur; + + for ( cur = 0; cur < 8; cur ++ ) { + byte a, b; + + a = *(buf ++ ); + b = *(buf ++ ); + printf("%02x%02x ", a, b ); + } + printf("\n"); + } + for ( i = 0; i < remainder/2 ; i++ ) { + byte a, b; + + a = *(buf ++ ); + b = *(buf ++ ); + printf("%02x%02x ", a, b ); + } + printf("\n"); +#endif +} +#endif + +int eth_init(bd_t *bd) { +#ifdef SHARED_RESOURCES + swap_to(ETHERNET); +#endif + return (smc_open(bd)); +} + +void eth_halt() { + smc_close(); +} + +int eth_rx() { + return smc_rcv(); +} + +int eth_send(volatile void *packet, int length) { + return smc_send_packet(packet, length); +} + +int smc_get_ethaddr (bd_t * bd) +{ + int env_size, rom_valid, env_present = 0, reg; + char *s = NULL, *e, es[] = "11:22:33:44:55:66"; + char s_env_mac[64]; + uchar v_env_mac[6], v_rom_mac[6], *v_mac; + + env_size = getenv_r ("ethaddr", s_env_mac, sizeof (s_env_mac)); + if ((env_size > 0) && (env_size < sizeof (es))) { /* exit if env is bad */ + printf ("\n*** ERROR: ethaddr is not set properly!!\n"); + return (-1); + } + + if (env_size > 0) { + env_present = 1; + s = s_env_mac; + } + + for (reg = 0; reg < 6; ++reg) { /* turn string into mac value */ + v_env_mac[reg] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } + + rom_valid = get_rom_mac (v_rom_mac); /* get ROM mac value if any */ + + if (!env_present) { /* if NO env */ + if (rom_valid) { /* but ROM is valid */ + v_mac = v_rom_mac; + sprintf (s_env_mac, "%02X:%02X:%02X:%02X:%02X:%02X", + v_mac[0], v_mac[1], v_mac[2], v_mac[3], + v_mac[4], v_mac[5]); + setenv ("ethaddr", s_env_mac); + } else { /* no env, bad ROM */ + printf ("\n*** ERROR: ethaddr is NOT set !!\n"); + return (-1); + } + } else { /* good env, don't care ROM */ + v_mac = v_env_mac; /* always use a good env over a ROM */ + } + + if (env_present && rom_valid) { /* if both env and ROM are good */ + if (memcmp (v_env_mac, v_rom_mac, 6) != 0) { + printf ("\nWarning: MAC addresses don't match:\n"); + printf ("\tHW MAC address: " + "%02X:%02X:%02X:%02X:%02X:%02X\n", + v_rom_mac[0], v_rom_mac[1], + v_rom_mac[2], v_rom_mac[3], + v_rom_mac[4], v_rom_mac[5] ); + printf ("\t\"ethaddr\" value: " + "%02X:%02X:%02X:%02X:%02X:%02X\n", + v_env_mac[0], v_env_mac[1], + v_env_mac[2], v_env_mac[3], + v_env_mac[4], v_env_mac[5]) ; + debug ("### Set MAC addr from environment\n"); + } + } + memcpy (bd->bi_enetaddr, v_mac, 6); /* update global address to match env (allows env changing) */ + smc_set_mac_addr ((uchar *)v_mac); /* use old function to update smc default */ + PRINTK("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n", v_mac[0], v_mac[1], + v_mac[2], v_mac[3], v_mac[4], v_mac[5]); + return (0); +} + +int get_rom_mac (uchar *v_rom_mac) +{ +#ifdef HARDCODE_MAC /* used for testing or to supress run time warnings */ + char hw_mac_addr[] = { 0x02, 0x80, 0xad, 0x20, 0x31, 0xb8 }; + + memcpy (v_rom_mac, hw_mac_addr, 6); + return (1); +#else + int i; + int valid_mac = 0; + + SMC_SELECT_BANK (1); + for (i=0; i<6; i++) + { + v_rom_mac[i] = SMC_inb ((ADDR0_REG + i)); + valid_mac |= v_rom_mac[i]; + } + + return (valid_mac ? 1 : 0); +#endif +} +#endif /* CONFIG_DRIVER_SMC91111 */ -- cgit v1.1