summaryrefslogtreecommitdiff
path: root/drivers/net/keystone_net.c
diff options
context:
space:
mode:
authorKaricheri, Muralidharan <m-karicheri2@ti.com>2014-04-01 15:01:13 -0400
committerTom Rini <trini@ti.com>2014-04-17 17:24:39 -0400
commitfc9a8e8d40e770b00383c2433c843fe68e38dad3 (patch)
treeb075a329a65ffd0b8f7777932bf5f111fd0da5fe /drivers/net/keystone_net.c
parent30fe8c150f22f8d4d7f8cf4c5e2bfffab782fd51 (diff)
downloadu-boot-imx-fc9a8e8d40e770b00383c2433c843fe68e38dad3.zip
u-boot-imx-fc9a8e8d40e770b00383c2433c843fe68e38dad3.tar.gz
u-boot-imx-fc9a8e8d40e770b00383c2433c843fe68e38dad3.tar.bz2
keystone2: net: add keystone ethernet driver
Ethernet driver configures the CPSW, SGMI and Phy and uses the the Navigator APIs. The driver supports 4 Ethernet ports and can work with only one port at a time. Port configurations are defined in board.c. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
Diffstat (limited to 'drivers/net/keystone_net.c')
-rw-r--r--drivers/net/keystone_net.c716
1 files changed, 716 insertions, 0 deletions
diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c
new file mode 100644
index 0000000..f95c928
--- /dev/null
+++ b/drivers/net/keystone_net.c
@@ -0,0 +1,716 @@
+/*
+ * Ethernet driver for TI K2HK EVM.
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <command.h>
+
+#include <net.h>
+#include <miiphy.h>
+#include <malloc.h>
+#include <asm/arch/emac_defs.h>
+#include <asm/arch/psc_defs.h>
+#include <asm/arch/keystone_nav.h>
+
+unsigned int emac_dbg;
+
+unsigned int emac_open;
+static unsigned int sys_has_mdio = 1;
+
+#ifdef KEYSTONE2_EMAC_GIG_ENABLE
+#define emac_gigabit_enable(x) keystone2_eth_gigabit_enable(x)
+#else
+#define emac_gigabit_enable(x) /* no gigabit to enable */
+#endif
+
+#define RX_BUFF_NUMS 24
+#define RX_BUFF_LEN 1520
+#define MAX_SIZE_STREAM_BUFFER RX_BUFF_LEN
+
+static u8 rx_buffs[RX_BUFF_NUMS * RX_BUFF_LEN] __aligned(16);
+
+struct rx_buff_desc net_rx_buffs = {
+ .buff_ptr = rx_buffs,
+ .num_buffs = RX_BUFF_NUMS,
+ .buff_len = RX_BUFF_LEN,
+ .rx_flow = 22,
+};
+
+static void keystone2_eth_mdio_enable(void);
+
+static int gen_get_link_speed(int phy_addr);
+
+/* EMAC Addresses */
+static volatile struct emac_regs *adap_emac =
+ (struct emac_regs *)EMAC_EMACSL_BASE_ADDR;
+static volatile struct mdio_regs *adap_mdio =
+ (struct mdio_regs *)EMAC_MDIO_BASE_ADDR;
+
+int keystone2_eth_read_mac_addr(struct eth_device *dev)
+{
+ struct eth_priv_t *eth_priv;
+ u32 maca = 0;
+ u32 macb = 0;
+
+ eth_priv = (struct eth_priv_t *)dev->priv;
+
+ /* Read the e-fuse mac address */
+ if (eth_priv->slave_port == 1) {
+ maca = __raw_readl(MAC_ID_BASE_ADDR);
+ macb = __raw_readl(MAC_ID_BASE_ADDR + 4);
+ }
+
+ dev->enetaddr[0] = (macb >> 8) & 0xff;
+ dev->enetaddr[1] = (macb >> 0) & 0xff;
+ dev->enetaddr[2] = (maca >> 24) & 0xff;
+ dev->enetaddr[3] = (maca >> 16) & 0xff;
+ dev->enetaddr[4] = (maca >> 8) & 0xff;
+ dev->enetaddr[5] = (maca >> 0) & 0xff;
+
+ return 0;
+}
+
+static void keystone2_eth_mdio_enable(void)
+{
+ u_int32_t clkdiv;
+
+ clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
+
+ writel((clkdiv & 0xffff) |
+ MDIO_CONTROL_ENABLE |
+ MDIO_CONTROL_FAULT |
+ MDIO_CONTROL_FAULT_ENABLE,
+ &adap_mdio->control);
+
+ while (readl(&adap_mdio->control) & MDIO_CONTROL_IDLE)
+ ;
+}
+
+/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */
+int keystone2_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
+{
+ int tmp;
+
+ while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
+ ;
+
+ writel(MDIO_USERACCESS0_GO |
+ MDIO_USERACCESS0_WRITE_READ |
+ ((reg_num & 0x1f) << 21) |
+ ((phy_addr & 0x1f) << 16),
+ &adap_mdio->useraccess0);
+
+ /* Wait for command to complete */
+ while ((tmp = readl(&adap_mdio->useraccess0)) & MDIO_USERACCESS0_GO)
+ ;
+
+ if (tmp & MDIO_USERACCESS0_ACK) {
+ *data = tmp & 0xffff;
+ return 0;
+ }
+
+ *data = -1;
+ return -1;
+}
+
+/*
+ * Write to a PHY register via MDIO inteface.
+ * Blocks until operation is complete.
+ */
+int keystone2_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
+{
+ while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
+ ;
+
+ writel(MDIO_USERACCESS0_GO |
+ MDIO_USERACCESS0_WRITE_WRITE |
+ ((reg_num & 0x1f) << 21) |
+ ((phy_addr & 0x1f) << 16) |
+ (data & 0xffff),
+ &adap_mdio->useraccess0);
+
+ /* Wait for command to complete */
+ while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
+ ;
+
+ return 0;
+}
+
+/* PHY functions for a generic PHY */
+static int gen_get_link_speed(int phy_addr)
+{
+ u_int16_t tmp;
+
+ if ((!keystone2_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp)) &&
+ (tmp & 0x04)) {
+ return 0;
+ }
+
+ return -1;
+}
+
+static void __attribute__((unused))
+ keystone2_eth_gigabit_enable(struct eth_device *dev)
+{
+ u_int16_t data;
+ struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
+
+ if (sys_has_mdio) {
+ if (keystone2_eth_phy_read(eth_priv->phy_addr, 0, &data) ||
+ !(data & (1 << 6))) /* speed selection MSB */
+ return;
+ }
+
+ /*
+ * Check if link detected is giga-bit
+ * If Gigabit mode detected, enable gigbit in MAC
+ */
+ writel(readl(&(adap_emac[eth_priv->slave_port - 1].maccontrol)) |
+ EMAC_MACCONTROL_GIGFORCE | EMAC_MACCONTROL_GIGABIT_ENABLE,
+ &(adap_emac[eth_priv->slave_port - 1].maccontrol))
+ ;
+}
+
+int keystone_sgmii_link_status(int port)
+{
+ u32 status = 0;
+
+ status = __raw_readl(SGMII_STATUS_REG(port));
+
+ return status & SGMII_REG_STATUS_LINK;
+}
+
+
+int keystone_get_link_status(struct eth_device *dev)
+{
+ struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
+ int sgmii_link;
+ int link_state = 0;
+#if CONFIG_GET_LINK_STATUS_ATTEMPTS > 1
+ int j;
+
+ for (j = 0; (j < CONFIG_GET_LINK_STATUS_ATTEMPTS) && (link_state == 0);
+ j++) {
+#endif
+ sgmii_link =
+ keystone_sgmii_link_status(eth_priv->slave_port - 1);
+
+ if (sgmii_link) {
+ link_state = 1;
+
+ if (eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY)
+ if (gen_get_link_speed(eth_priv->phy_addr))
+ link_state = 0;
+ }
+#if CONFIG_GET_LINK_STATUS_ATTEMPTS > 1
+ }
+#endif
+ return link_state;
+}
+
+int keystone_sgmii_config(int port, int interface)
+{
+ unsigned int i, status, mask;
+ unsigned int mr_adv_ability, control;
+
+ switch (interface) {
+ case SGMII_LINK_MAC_MAC_AUTONEG:
+ mr_adv_ability = (SGMII_REG_MR_ADV_ENABLE |
+ SGMII_REG_MR_ADV_LINK |
+ SGMII_REG_MR_ADV_FULL_DUPLEX |
+ SGMII_REG_MR_ADV_GIG_MODE);
+ control = (SGMII_REG_CONTROL_MASTER |
+ SGMII_REG_CONTROL_AUTONEG);
+
+ break;
+ case SGMII_LINK_MAC_PHY:
+ case SGMII_LINK_MAC_PHY_FORCED:
+ mr_adv_ability = SGMII_REG_MR_ADV_ENABLE;
+ control = SGMII_REG_CONTROL_AUTONEG;
+
+ break;
+ case SGMII_LINK_MAC_MAC_FORCED:
+ mr_adv_ability = (SGMII_REG_MR_ADV_ENABLE |
+ SGMII_REG_MR_ADV_LINK |
+ SGMII_REG_MR_ADV_FULL_DUPLEX |
+ SGMII_REG_MR_ADV_GIG_MODE);
+ control = SGMII_REG_CONTROL_MASTER;
+
+ break;
+ case SGMII_LINK_MAC_FIBER:
+ mr_adv_ability = 0x20;
+ control = SGMII_REG_CONTROL_AUTONEG;
+
+ break;
+ default:
+ mr_adv_ability = SGMII_REG_MR_ADV_ENABLE;
+ control = SGMII_REG_CONTROL_AUTONEG;
+ }
+
+ __raw_writel(0, SGMII_CTL_REG(port));
+
+ /*
+ * Wait for the SerDes pll to lock,
+ * but don't trap if lock is never read
+ */
+ for (i = 0; i < 1000; i++) {
+ udelay(2000);
+ status = __raw_readl(SGMII_STATUS_REG(port));
+ if ((status & SGMII_REG_STATUS_LOCK) != 0)
+ break;
+ }
+
+ __raw_writel(mr_adv_ability, SGMII_MRADV_REG(port));
+ __raw_writel(control, SGMII_CTL_REG(port));
+
+
+ mask = SGMII_REG_STATUS_LINK;
+
+ if (control & SGMII_REG_CONTROL_AUTONEG)
+ mask |= SGMII_REG_STATUS_AUTONEG;
+
+ for (i = 0; i < 1000; i++) {
+ status = __raw_readl(SGMII_STATUS_REG(port));
+ if ((status & mask) == mask)
+ break;
+ }
+
+ return 0;
+}
+
+int mac_sl_reset(u32 port)
+{
+ u32 i, v;
+
+ if (port >= DEVICE_N_GMACSL_PORTS)
+ return GMACSL_RET_INVALID_PORT;
+
+ /* Set the soft reset bit */
+ DEVICE_REG32_W(DEVICE_EMACSL_BASE(port) +
+ CPGMACSL_REG_RESET, CPGMAC_REG_RESET_VAL_RESET);
+
+ /* Wait for the bit to clear */
+ for (i = 0; i < DEVICE_EMACSL_RESET_POLL_COUNT; i++) {
+ v = DEVICE_REG32_R(DEVICE_EMACSL_BASE(port) +
+ CPGMACSL_REG_RESET);
+ if ((v & CPGMAC_REG_RESET_VAL_RESET_MASK) !=
+ CPGMAC_REG_RESET_VAL_RESET)
+ return GMACSL_RET_OK;
+ }
+
+ /* Timeout on the reset */
+ return GMACSL_RET_WARN_RESET_INCOMPLETE;
+}
+
+int mac_sl_config(u_int16_t port, struct mac_sl_cfg *cfg)
+{
+ u32 v, i;
+ int ret = GMACSL_RET_OK;
+
+ if (port >= DEVICE_N_GMACSL_PORTS)
+ return GMACSL_RET_INVALID_PORT;
+
+ if (cfg->max_rx_len > CPGMAC_REG_MAXLEN_LEN) {
+ cfg->max_rx_len = CPGMAC_REG_MAXLEN_LEN;
+ ret = GMACSL_RET_WARN_MAXLEN_TOO_BIG;
+ }
+
+ /* Must wait if the device is undergoing reset */
+ for (i = 0; i < DEVICE_EMACSL_RESET_POLL_COUNT; i++) {
+ v = DEVICE_REG32_R(DEVICE_EMACSL_BASE(port) +
+ CPGMACSL_REG_RESET);
+ if ((v & CPGMAC_REG_RESET_VAL_RESET_MASK) !=
+ CPGMAC_REG_RESET_VAL_RESET)
+ break;
+ }
+
+ if (i == DEVICE_EMACSL_RESET_POLL_COUNT)
+ return GMACSL_RET_CONFIG_FAIL_RESET_ACTIVE;
+
+ DEVICE_REG32_W(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN,
+ cfg->max_rx_len);
+
+ DEVICE_REG32_W(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL,
+ cfg->ctl);
+
+ return ret;
+}
+
+int ethss_config(u32 ctl, u32 max_pkt_size)
+{
+ u32 i;
+
+ /* Max length register */
+ DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_MAXLEN, max_pkt_size);
+
+ /* Control register */
+ DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_CTL, ctl);
+
+ /* All statistics enabled by default */
+ DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_STAT_PORT_EN,
+ CPSW_REG_VAL_STAT_ENABLE_ALL);
+
+ /* Reset and enable the ALE */
+ DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_ALE_CONTROL,
+ CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE |
+ CPSW_REG_VAL_ALE_CTL_BYPASS);
+
+ /* All ports put into forward mode */
+ for (i = 0; i < DEVICE_CPSW_NUM_PORTS; i++)
+ DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_ALE_PORTCTL(i),
+ CPSW_REG_VAL_PORTCTL_FORWARD_MODE);
+
+ return 0;
+}
+
+int ethss_start(void)
+{
+ int i;
+ struct mac_sl_cfg cfg;
+
+ cfg.max_rx_len = MAX_SIZE_STREAM_BUFFER;
+ cfg.ctl = GMACSL_ENABLE | GMACSL_RX_ENABLE_EXT_CTL;
+
+ for (i = 0; i < DEVICE_N_GMACSL_PORTS; i++) {
+ mac_sl_reset(i);
+ mac_sl_config(i, &cfg);
+ }
+
+ return 0;
+}
+
+int ethss_stop(void)
+{
+ int i;
+
+ for (i = 0; i < DEVICE_N_GMACSL_PORTS; i++)
+ mac_sl_reset(i);
+
+ return 0;
+}
+
+int32_t cpmac_drv_send(u32 *buffer, int num_bytes, int slave_port_num)
+{
+ if (num_bytes < EMAC_MIN_ETHERNET_PKT_SIZE)
+ num_bytes = EMAC_MIN_ETHERNET_PKT_SIZE;
+
+ return netcp_send(buffer, num_bytes, (slave_port_num) << 16);
+}
+
+/* Eth device open */
+static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
+{
+ u_int32_t clkdiv;
+ int link;
+ struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
+
+ debug("+ emac_open\n");
+
+ net_rx_buffs.rx_flow = eth_priv->rx_flow;
+
+ sys_has_mdio =
+ (eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY) ? 1 : 0;
+
+ psc_enable_module(KS2_LPSC_PA);
+ psc_enable_module(KS2_LPSC_CPGMAC);
+
+ sgmii_serdes_setup_156p25mhz();
+
+ if (sys_has_mdio)
+ keystone2_eth_mdio_enable();
+
+ keystone_sgmii_config(eth_priv->slave_port - 1,
+ eth_priv->sgmii_link_type);
+
+ udelay(10000);
+
+ /* On chip switch configuration */
+ ethss_config(target_get_switch_ctl(), SWITCH_MAX_PKT_SIZE);
+
+ /* TODO: add error handling code */
+ if (qm_init()) {
+ printf("ERROR: qm_init()\n");
+ return -1;
+ }
+ if (netcp_init(&net_rx_buffs)) {
+ qm_close();
+ printf("ERROR: netcp_init()\n");
+ return -1;
+ }
+
+ /*
+ * Streaming switch configuration. If not present this
+ * statement is defined to void in target.h.
+ * If present this is usually defined to a series of register writes
+ */
+ hw_config_streaming_switch();
+
+ if (sys_has_mdio) {
+ /* Init MDIO & get link state */
+ clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
+ writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE |
+ MDIO_CONTROL_FAULT, &adap_mdio->control)
+ ;
+
+ /* We need to wait for MDIO to start */
+ udelay(1000);
+
+ link = keystone_get_link_status(dev);
+ if (link == 0) {
+ netcp_close();
+ qm_close();
+ return -1;
+ }
+ }
+
+ emac_gigabit_enable(dev);
+
+ ethss_start();
+
+ debug("- emac_open\n");
+
+ emac_open = 1;
+
+ return 0;
+}
+
+/* Eth device close */
+void keystone2_eth_close(struct eth_device *dev)
+{
+ debug("+ emac_close\n");
+
+ if (!emac_open)
+ return;
+
+ ethss_stop();
+
+ netcp_close();
+ qm_close();
+
+ emac_open = 0;
+
+ debug("- emac_close\n");
+}
+
+static int tx_send_loop;
+
+/*
+ * This function sends a single packet on the network and returns
+ * positive number (number of bytes transmitted) or negative for error
+ */
+static int keystone2_eth_send_packet(struct eth_device *dev,
+ void *packet, int length)
+{
+ int ret_status = -1;
+ struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
+
+ tx_send_loop = 0;
+
+ if (keystone_get_link_status(dev) == 0)
+ return -1;
+
+ emac_gigabit_enable(dev);
+
+ if (cpmac_drv_send((u32 *)packet, length, eth_priv->slave_port) != 0)
+ return ret_status;
+
+ if (keystone_get_link_status(dev) == 0)
+ return -1;
+
+ emac_gigabit_enable(dev);
+
+ return length;
+}
+
+/*
+ * This function handles receipt of a packet from the network
+ */
+static int keystone2_eth_rcv_packet(struct eth_device *dev)
+{
+ void *hd;
+ int pkt_size;
+ u32 *pkt;
+
+ hd = netcp_recv(&pkt, &pkt_size);
+ if (hd == NULL)
+ return 0;
+
+ NetReceive((uchar *)pkt, pkt_size);
+
+ netcp_release_rxhd(hd);
+
+ return pkt_size;
+}
+
+/*
+ * This function initializes the EMAC hardware.
+ */
+int keystone2_emac_initialize(struct eth_priv_t *eth_priv)
+{
+ struct eth_device *dev;
+
+ dev = malloc(sizeof(struct eth_device));
+ if (dev == NULL)
+ return -1;
+
+ memset(dev, 0, sizeof(struct eth_device));
+
+ strcpy(dev->name, eth_priv->int_name);
+ dev->priv = eth_priv;
+
+ keystone2_eth_read_mac_addr(dev);
+
+ dev->iobase = 0;
+ dev->init = keystone2_eth_open;
+ dev->halt = keystone2_eth_close;
+ dev->send = keystone2_eth_send_packet;
+ dev->recv = keystone2_eth_rcv_packet;
+
+ eth_register(dev);
+
+ return 0;
+}
+
+void sgmii_serdes_setup_156p25mhz(void)
+{
+ unsigned int cnt;
+
+ /*
+ * configure Serializer/Deserializer (SerDes) hardware. SerDes IP
+ * hardware vendor published only register addresses and their values
+ * to be used for configuring SerDes. So had to use hardcoded values
+ * below.
+ */
+ clrsetbits_le32(0x0232a000, 0xffff0000, 0x00800000);
+ clrsetbits_le32(0x0232a014, 0x0000ffff, 0x00008282);
+ clrsetbits_le32(0x0232a060, 0x00ffffff, 0x00142438);
+ clrsetbits_le32(0x0232a064, 0x00ffff00, 0x00c3c700);
+ clrsetbits_le32(0x0232a078, 0x0000ff00, 0x0000c000);
+
+ clrsetbits_le32(0x0232a204, 0xff0000ff, 0x38000080);
+ clrsetbits_le32(0x0232a208, 0x000000ff, 0x00000000);
+ clrsetbits_le32(0x0232a20c, 0xff000000, 0x02000000);
+ clrsetbits_le32(0x0232a210, 0xff000000, 0x1b000000);
+ clrsetbits_le32(0x0232a214, 0x0000ffff, 0x00006fb8);
+ clrsetbits_le32(0x0232a218, 0xffff00ff, 0x758000e4);
+ clrsetbits_le32(0x0232a2ac, 0x0000ff00, 0x00004400);
+ clrsetbits_le32(0x0232a22c, 0x00ffff00, 0x00200800);
+ clrsetbits_le32(0x0232a280, 0x00ff00ff, 0x00820082);
+ clrsetbits_le32(0x0232a284, 0xffffffff, 0x1d0f0385);
+
+ clrsetbits_le32(0x0232a404, 0xff0000ff, 0x38000080);
+ clrsetbits_le32(0x0232a408, 0x000000ff, 0x00000000);
+ clrsetbits_le32(0x0232a40c, 0xff000000, 0x02000000);
+ clrsetbits_le32(0x0232a410, 0xff000000, 0x1b000000);
+ clrsetbits_le32(0x0232a414, 0x0000ffff, 0x00006fb8);
+ clrsetbits_le32(0x0232a418, 0xffff00ff, 0x758000e4);
+ clrsetbits_le32(0x0232a4ac, 0x0000ff00, 0x00004400);
+ clrsetbits_le32(0x0232a42c, 0x00ffff00, 0x00200800);
+ clrsetbits_le32(0x0232a480, 0x00ff00ff, 0x00820082);
+ clrsetbits_le32(0x0232a484, 0xffffffff, 0x1d0f0385);
+
+ clrsetbits_le32(0x0232a604, 0xff0000ff, 0x38000080);
+ clrsetbits_le32(0x0232a608, 0x000000ff, 0x00000000);
+ clrsetbits_le32(0x0232a60c, 0xff000000, 0x02000000);
+ clrsetbits_le32(0x0232a610, 0xff000000, 0x1b000000);
+ clrsetbits_le32(0x0232a614, 0x0000ffff, 0x00006fb8);
+ clrsetbits_le32(0x0232a618, 0xffff00ff, 0x758000e4);
+ clrsetbits_le32(0x0232a6ac, 0x0000ff00, 0x00004400);
+ clrsetbits_le32(0x0232a62c, 0x00ffff00, 0x00200800);
+ clrsetbits_le32(0x0232a680, 0x00ff00ff, 0x00820082);
+ clrsetbits_le32(0x0232a684, 0xffffffff, 0x1d0f0385);
+
+ clrsetbits_le32(0x0232a804, 0xff0000ff, 0x38000080);
+ clrsetbits_le32(0x0232a808, 0x000000ff, 0x00000000);
+ clrsetbits_le32(0x0232a80c, 0xff000000, 0x02000000);
+ clrsetbits_le32(0x0232a810, 0xff000000, 0x1b000000);
+ clrsetbits_le32(0x0232a814, 0x0000ffff, 0x00006fb8);
+ clrsetbits_le32(0x0232a818, 0xffff00ff, 0x758000e4);
+ clrsetbits_le32(0x0232a8ac, 0x0000ff00, 0x00004400);
+ clrsetbits_le32(0x0232a82c, 0x00ffff00, 0x00200800);
+ clrsetbits_le32(0x0232a880, 0x00ff00ff, 0x00820082);
+ clrsetbits_le32(0x0232a884, 0xffffffff, 0x1d0f0385);
+
+ clrsetbits_le32(0x0232aa00, 0x0000ff00, 0x00000800);
+ clrsetbits_le32(0x0232aa08, 0xffff0000, 0x38a20000);
+ clrsetbits_le32(0x0232aa30, 0x00ffff00, 0x008a8a00);
+ clrsetbits_le32(0x0232aa84, 0x0000ff00, 0x00000600);
+ clrsetbits_le32(0x0232aa94, 0xff000000, 0x10000000);
+ clrsetbits_le32(0x0232aaa0, 0xff000000, 0x81000000);
+ clrsetbits_le32(0x0232aabc, 0xff000000, 0xff000000);
+ clrsetbits_le32(0x0232aac0, 0x000000ff, 0x0000008b);
+ clrsetbits_le32(0x0232ab08, 0xffff0000, 0x583f0000);
+ clrsetbits_le32(0x0232ab0c, 0x000000ff, 0x0000004e);
+ clrsetbits_le32(0x0232a000, 0x000000ff, 0x00000003);
+ clrsetbits_le32(0x0232aa00, 0x000000ff, 0x0000005f);
+
+ clrsetbits_le32(0x0232aa48, 0x00ffff00, 0x00fd8c00);
+ clrsetbits_le32(0x0232aa54, 0x00ffffff, 0x002fec72);
+ clrsetbits_le32(0x0232aa58, 0xffffff00, 0x00f92100);
+ clrsetbits_le32(0x0232aa5c, 0xffffffff, 0x00040060);
+ clrsetbits_le32(0x0232aa60, 0xffffffff, 0x00008000);
+ clrsetbits_le32(0x0232aa64, 0xffffffff, 0x0c581220);
+ clrsetbits_le32(0x0232aa68, 0xffffffff, 0xe13b0602);
+ clrsetbits_le32(0x0232aa6c, 0xffffffff, 0xb8074cc1);
+ clrsetbits_le32(0x0232aa70, 0xffffffff, 0x3f02e989);
+ clrsetbits_le32(0x0232aa74, 0x000000ff, 0x00000001);
+ clrsetbits_le32(0x0232ab20, 0x00ff0000, 0x00370000);
+ clrsetbits_le32(0x0232ab1c, 0xff000000, 0x37000000);
+ clrsetbits_le32(0x0232ab20, 0x000000ff, 0x0000005d);
+
+ /*Bring SerDes out of Reset if SerDes is Shutdown & is in Reset Mode*/
+ clrbits_le32(0x0232a010, 1 << 28);
+
+ /* Enable TX and RX via the LANExCTL_STS 0x0000 + x*4 */
+ clrbits_le32(0x0232a228, 1 << 29);
+ writel(0xF800F8C0, 0x0232bfe0);
+ clrbits_le32(0x0232a428, 1 << 29);
+ writel(0xF800F8C0, 0x0232bfe4);
+ clrbits_le32(0x0232a628, 1 << 29);
+ writel(0xF800F8C0, 0x0232bfe8);
+ clrbits_le32(0x0232a828, 1 << 29);
+ writel(0xF800F8C0, 0x0232bfec);
+
+ /*Enable pll via the pll_ctrl 0x0014*/
+ writel(0xe0000000, 0x0232bff4)
+ ;
+
+ /*Waiting for SGMII Serdes PLL lock.*/
+ for (cnt = 10000; cnt > 0 && ((readl(0x02090114) & 0x10) == 0); cnt--)
+ ;
+
+ for (cnt = 10000; cnt > 0 && ((readl(0x02090214) & 0x10) == 0); cnt--)
+ ;
+
+ for (cnt = 10000; cnt > 0 && ((readl(0x02090414) & 0x10) == 0); cnt--)
+ ;
+
+ for (cnt = 10000; cnt > 0 && ((readl(0x02090514) & 0x10) == 0); cnt--)
+ ;
+
+ udelay(45000);
+}
+
+void sgmii_serdes_shutdown(void)
+{
+ /*
+ * shutdown SerDes hardware. SerDes hardware vendor published only
+ * register addresses and their values. So had to use hardcoded
+ * values below.
+ */
+ clrbits_le32(0x0232bfe0, 3 << 29 | 3 << 13);
+ setbits_le32(0x02320228, 1 << 29);
+ clrbits_le32(0x0232bfe4, 3 << 29 | 3 << 13);
+ setbits_le32(0x02320428, 1 << 29);
+ clrbits_le32(0x0232bfe8, 3 << 29 | 3 << 13);
+ setbits_le32(0x02320628, 1 << 29);
+ clrbits_le32(0x0232bfec, 3 << 29 | 3 << 13);
+ setbits_le32(0x02320828, 1 << 29);
+
+ clrbits_le32(0x02320034, 3 << 29);
+ setbits_le32(0x02320010, 1 << 28);
+}